diff options
Diffstat (limited to 'cc3200/hal/prcm.h')
| -rw-r--r-- | cc3200/hal/prcm.h | 285 |
1 files changed, 0 insertions, 285 deletions
diff --git a/cc3200/hal/prcm.h b/cc3200/hal/prcm.h deleted file mode 100644 index 2f700ae2c..000000000 --- a/cc3200/hal/prcm.h +++ /dev/null @@ -1,285 +0,0 @@ -//***************************************************************************** -// -// prcm.h -// -// Prototypes for the PRCM control driver. -// -// Copyright (C) 2014 Texas Instruments Incorporated - http://www.ti.com/ -// -// -// Redistribution and use in source and binary forms, with or without -// modification, are permitted provided that the following conditions -// are met: -// -// Redistributions of source code must retain the above copyright -// notice, this list of conditions and the following disclaimer. -// -// Redistributions in binary form must reproduce the above copyright -// notice, this list of conditions and the following disclaimer in the -// documentation and/or other materials provided with the -// distribution. -// -// Neither the name of Texas Instruments Incorporated nor the names of -// its contributors may be used to endorse or promote products derived -// from this software without specific prior written permission. -// -// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS -// "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT -// LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR -// A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT -// OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, -// SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT -// LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, -// DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY -// THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT -// (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE -// OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -// -//***************************************************************************** - -#ifndef __PRCM_H__ -#define __PRCM_H__ - -//***************************************************************************** -// -// If building with a C++ compiler, make all of the definitions in this header -// have a C binding. -// -//***************************************************************************** -#ifdef __cplusplus -extern "C" -{ -#endif - -//***************************************************************************** -// -// Peripheral clock and reset control registers -// -//***************************************************************************** -typedef struct _PRCM_PeripheralRegs_ -{ - -unsigned char ulClkReg; -unsigned char ulRstReg; - -}PRCM_PeriphRegs_t; - -//***************************************************************************** -// Values that can be passed to PRCMPeripheralEnable() and -// PRCMPeripheralDisable() -//***************************************************************************** -#define PRCM_RUN_MODE_CLK 0x00000001 -#define PRCM_SLP_MODE_CLK 0x00000100 -#define PRCM_DSLP_MODE_CLK 0x00010000 - -//***************************************************************************** -// Values that can be passed to PRCMSRAMRetentionEnable() and -// PRCMSRAMRetentionDisable() as ulSramColSel. -//***************************************************************************** -#define PRCM_SRAM_COL_1 0x00000001 -#define PRCM_SRAM_COL_2 0x00000002 -#define PRCM_SRAM_COL_3 0x00000004 -#define PRCM_SRAM_COL_4 0x00000008 - -//***************************************************************************** -// Values that can be passed to PRCMSRAMRetentionEnable() and -// PRCMSRAMRetentionDisable() as ulModeFlags. -//***************************************************************************** -#define PRCM_SRAM_DSLP_RET 0x00000001 -#define PRCM_SRAM_LPDS_RET 0x00000002 - -//***************************************************************************** -// Values that can be passed to PRCMLPDSWakeupSourceEnable(), -// PRCMLPDSWakeupCauseGet() and PRCMLPDSWakeupSourceDisable(). -//***************************************************************************** -#define PRCM_LPDS_HOST_IRQ 0x00000080 -#define PRCM_LPDS_GPIO 0x00000010 -#define PRCM_LPDS_TIMER 0x00000001 - -//***************************************************************************** -// Values that can be passed to PRCMLPDSWakeUpGPIOSelect() as Type -//***************************************************************************** -#define PRCM_LPDS_LOW_LEVEL 0x00000002 -#define PRCM_LPDS_HIGH_LEVEL 0x00000000 -#define PRCM_LPDS_FALL_EDGE 0x00000001 -#define PRCM_LPDS_RISE_EDGE 0x00000003 - -//***************************************************************************** -// Values that can be passed to PRCMLPDSWakeUpGPIOSelect() -//***************************************************************************** -#define PRCM_LPDS_GPIO2 0x00000000 -#define PRCM_LPDS_GPIO4 0x00000001 -#define PRCM_LPDS_GPIO13 0x00000002 -#define PRCM_LPDS_GPIO17 0x00000003 -#define PRCM_LPDS_GPIO11 0x00000004 -#define PRCM_LPDS_GPIO24 0x00000005 -#define PRCM_LPDS_GPIO26 0x00000006 - -//***************************************************************************** -// Values that can be passed to PRCMHibernateWakeupSourceEnable(), -// PRCMHibernateWakeupSourceDisable(). -//***************************************************************************** -#define PRCM_HIB_SLOW_CLK_CTR 0x00000001 - -//***************************************************************************** -// Values that can be passed to PRCMHibernateWakeUpGPIOSelect() as ulType -//***************************************************************************** -#define PRCM_HIB_LOW_LEVEL 0x00000000 -#define PRCM_HIB_HIGH_LEVEL 0x00000001 -#define PRCM_HIB_FALL_EDGE 0x00000002 -#define PRCM_HIB_RISE_EDGE 0x00000003 - -//***************************************************************************** -// Values that can be passed to PRCMHibernateWakeupSourceEnable(), -// PRCMHibernateWakeupSourceDisable(), PRCMHibernateWakeUpGPIOSelect() -//***************************************************************************** -#define PRCM_HIB_GPIO2 0x00010000 -#define PRCM_HIB_GPIO4 0x00020000 -#define PRCM_HIB_GPIO13 0x00040000 -#define PRCM_HIB_GPIO17 0x00080000 -#define PRCM_HIB_GPIO11 0x00100000 -#define PRCM_HIB_GPIO24 0x00200000 -#define PRCM_HIB_GPIO26 0x00400000 - -//***************************************************************************** -// Values that will be returned from PRCMSysResetCauseGet(). -//***************************************************************************** -#define PRCM_POWER_ON 0x00000000 -#define PRCM_LPDS_EXIT 0x00000001 -#define PRCM_CORE_RESET 0x00000003 -#define PRCM_MCU_RESET 0x00000004 -#define PRCM_WDT_RESET 0x00000005 -#define PRCM_SOC_RESET 0x00000006 -#define PRCM_HIB_EXIT 0x00000007 - -//***************************************************************************** -// Values that can be passed to PRCMHibernateWakeupCauseGet(). -//***************************************************************************** -#define PRCM_HIB_WAKEUP_CAUSE_SLOW_CLOCK 0x00000002 -#define PRCM_HIB_WAKEUP_CAUSE_GPIO 0x00000004 - -//***************************************************************************** -// Values that can be passed to PRCMIntEnable -//***************************************************************************** -#define PRCM_INT_SLOW_CLK_CTR 0x00004000 - -//***************************************************************************** -// Values that can be passed to PRCMPeripheralClkEnable(), -// PRCMPeripheralClkDisable(), PRCMPeripheralReset() -//***************************************************************************** -#define PRCM_CAMERA 0x00000000 -#define PRCM_I2S 0x00000001 -#define PRCM_SDHOST 0x00000002 -#define PRCM_GSPI 0x00000003 -#define PRCM_LSPI 0x00000004 -#define PRCM_UDMA 0x00000005 -#define PRCM_GPIOA0 0x00000006 -#define PRCM_GPIOA1 0x00000007 -#define PRCM_GPIOA2 0x00000008 -#define PRCM_GPIOA3 0x00000009 -#define PRCM_GPIOA4 0x0000000A -#define PRCM_WDT 0x0000000B -#define PRCM_UARTA0 0x0000000C -#define PRCM_UARTA1 0x0000000D -#define PRCM_TIMERA0 0x0000000E -#define PRCM_TIMERA1 0x0000000F -#define PRCM_TIMERA2 0x00000010 -#define PRCM_TIMERA3 0x00000011 -#define PRCM_DTHE 0x00000012 -#define PRCM_SSPI 0x00000013 -#define PRCM_I2CA0 0x00000014 -// Note : PRCM_ADC is a dummy define for pinmux utility code generation -// PRCM_ADC should never be used in any user code. -#define PRCM_ADC 0x000000FF - -//***************************************************************************** -// User bits in the PRCM persistent registers -//***************************************************************************** -#define PRCM_SAFE_BOOT_BIT 30 -#define PRCM_WDT_RESET_BIT 29 -#define PRCM_FIRST_BOOT_BIT 28 - -//***************************************************************************** -// -// API Function prototypes -// -//***************************************************************************** -extern void PRCMSetSpecialBit(unsigned char bit); -extern void PRCMClearSpecialBit(unsigned char bit); -extern tBoolean PRCMGetSpecialBit(unsigned char bit); -extern void PRCMSOCReset(void); -extern void PRCMMCUReset(tBoolean bIncludeSubsystem); -extern unsigned long PRCMSysResetCauseGet(void); - -extern void PRCMPeripheralClkEnable(unsigned long ulPeripheral, - unsigned long ulClkFlags); -extern void PRCMPeripheralClkDisable(unsigned long ulPeripheral, - unsigned long ulClkFlags); -extern void PRCMPeripheralReset(unsigned long ulPeripheral); -extern tBoolean PRCMPeripheralStatusGet(unsigned long ulPeripheral); - -extern void PRCMI2SClockFreqSet(unsigned long ulI2CClkFreq); -extern unsigned long PRCMPeripheralClockGet(unsigned long ulPeripheral); - -extern void PRCMSleepEnter(void); -extern void PRCMDeepSleepEnter(void); - -extern void PRCMSRAMRetentionEnable(unsigned long ulSramColSel, - unsigned long ulFlags); -extern void PRCMSRAMRetentionDisable(unsigned long ulSramColSel, - unsigned long ulFlags); -extern void PRCMLPDSRestoreInfoSet(unsigned long ulRestoreSP, - unsigned long ulRestorePC); -extern void PRCMLPDSEnter(void); -extern void PRCMLPDSIntervalSet(unsigned long ulTicks); -extern void PRCMLPDSWakeupSourceEnable(unsigned long ulLpdsWakeupSrc); -extern unsigned long PRCMLPDSWakeupCauseGet(void); -extern void PRCMLPDSWakeUpGPIOSelect(unsigned long ulGPIOPin, - unsigned long ulType); -extern void PRCMLPDSWakeupSourceDisable(unsigned long ulLpdsWakeupSrc); - -extern void PRCMHibernateEnter(void); -extern void PRCMHibernateWakeupSourceEnable(unsigned long ulHIBWakupSrc); -extern unsigned long PRCMHibernateWakeupCauseGet(void); -extern void PRCMHibernateWakeUpGPIOSelect(unsigned long ulMultiGPIOBitMap, - unsigned long ulType); -extern void PRCMHibernateWakeupSourceDisable(unsigned long ulHIBWakupSrc); -extern void PRCMHibernateIntervalSet(unsigned long long ullTicks); - -extern unsigned long long PRCMSlowClkCtrGet(void); -extern unsigned long long PRCMSlowClkCtrFastGet(void); -extern void PRCMSlowClkCtrMatchSet(unsigned long long ullTicks); -extern unsigned long long PRCMSlowClkCtrMatchGet(void); - -extern void PRCMOCRRegisterWrite(unsigned char ucIndex, - unsigned long ulRegValue); -extern unsigned long PRCMOCRRegisterRead(unsigned char ucIndex); - -extern void PRCMIntRegister(void (*pfnHandler)(void)); -extern void PRCMIntUnregister(void); -extern void PRCMIntEnable(unsigned long ulIntFlags); -extern void PRCMIntDisable(unsigned long ulIntFlags); -extern unsigned long PRCMIntStatus(void); -extern void PRCMRTCInUseSet(void); -extern void PRCMRTCInUseClear(void); -extern tBoolean PRCMRTCInUseGet(void); -extern void PRCMRTCSet(unsigned long ulSecs, unsigned short usMsec); -extern void PRCMRTCGet(unsigned long *ulSecs, unsigned short *usMsec); -extern void PRCMRTCMatchSet(unsigned long ulSecs, unsigned short usMsec); -extern void PRCMRTCMatchGet(unsigned long *ulSecs, unsigned short *usMsec); -extern void PRCMCC3200MCUInit(void); -extern unsigned long PRCMHIBRegRead(unsigned long ulRegAddr); -extern void PRCMHIBRegWrite(unsigned long ulRegAddr, unsigned long ulValue); -extern unsigned long PRCMCameraFreqSet(unsigned char ulDivider, unsigned char ulWidth); - - -//***************************************************************************** -// -// Mark the end of the C bindings section for C++ compilers. -// -//***************************************************************************** -#ifdef __cplusplus -} -#endif - -#endif // __PRCM_H__ |