diff options
| -rw-r--r-- | README.md | 9 | ||||
| -rw-r--r-- | openmano-mod-zigbee.png | bin | 0 -> 82362 bytes |
2 files changed, 8 insertions, 1 deletions
@@ -5,5 +5,12 @@ An open source manometer hardware and firmware implementation. Originally designed for monitoring pressure in scuba diving equipment; modified for modularity and battery-powered operation. -OpenMano comprises of a base PCB design and "mods" which stack onto the base board. The base board is powered by a STM32F405 MCU and contains a battery holder for 18650 batteries along with a battery charge management IC. The DXF for the base board contains a template for making mods with a 20-pin connector that allows stacking mods. The base board breaks out multiple peripheral buses which the mods use, including I2C, UART, SPI as well as 8 GPIO pins. +OpenMano comprises of a base PCB design and "mods" which stack onto the base board. The base board is powered by a STM32F405 MCU and contains a battery holder for 18650 batteries along with a battery charge management IC. The base board breaks out multiple peripheral buses which the mods use, including I2C, UART, SPI as well as 8 GPIO pins. +## Mods + + + +Mods enable extending the functionality of the base board using the peripheral buses provided with the breakout. The DXF for the base board contains a template for making mods with a 20-pin connector that allows stacking mods. + +A sample mod with wireless functionality over Zigbee is included in pcb/mods/zigbee. This mod uses the UART peripheral along with numerous GPIOs required for the Digi-Xbee module. diff --git a/openmano-mod-zigbee.png b/openmano-mod-zigbee.png Binary files differnew file mode 100644 index 0000000..a2f677b --- /dev/null +++ b/openmano-mod-zigbee.png |
