| Age | Commit message (Expand) | Author |
|---|
| 2017-07-19 | all: Remove trailing spaces, per coding conventions. | Damien George |
| 2017-06-15 | stmhal: Make error messages more consistent across peripherals. | Damien George |
| 2017-06-15 | all: Make more use of mp_raise_{msg,TypeError,ValueError} helpers. | Damien George |
| 2017-05-06 | stmhal: Convert all module and method tables to use MP_ROM macros. | Damien George |
| 2017-02-16 | py: Add iter_buf to getiter type method. | Damien George |
| 2017-02-06 | stmhal: Use MICROPY_EVENT_POLL_HOOK instead of __WFI where appropriate. | Damien George |
| 2017-01-04 | all: Consistently update signatures of .make_new and .call methods. | Paul Sokolovsky |
| 2016-12-28 | stmhal/uart: Increase inter-character timeout by 1ms. | Damien George |
| 2016-12-28 | stmhal/uart: Provide a custom function to transmit over UART. | Damien George |
| 2016-12-05 | stmhal/uart: Add check that UART id is valid for the given board. | Damien George |
| 2016-12-05 | stmhal/uart: Add support for UART7 and UART8 on F7 MCUs. | Damien George |
| 2016-12-05 | stmhal: Refactor UART configuration to use pin objects. | Rami Ali |
| 2016-12-02 | py/stream: Move ad-hoc ioctl constants to stream.h and rename them. | Damien George |
| 2016-11-14 | all: Remove readall() method, which is equivalent to read() w/o args. | Paul Sokolovsky |
| 2016-06-18 | all: Rename mp_obj_type_t::stream_p to protocol. | Paul Sokolovsky |
| 2016-06-03 | stmhal/uart.c: Fix wrong baudrate calculation for stm32l4 series. | Tobias Badertscher |
| 2016-05-10 | stmhal: Convert to use internal errno symbols; enable uerrno module. | Damien George |
| 2016-04-17 | stmhal: L4: Modify uart.c to support L4 MCU. | Damien George |
| 2016-04-13 | stmhal: Properly handle RTS/CTS flow control for buf/unbuf transfers. | Peter Hinch |
| 2016-01-11 | py: Change first arg of type.make_new from mp_obj_t to mp_obj_type_t*. | Damien George |
| 2015-12-12 | stmhal: Make uart init use struct instead of array for parsing args. | Damien George |
| 2015-12-04 | stmhal: Fix uart off by 1 circular buffer size. | Ryan Shaw |
| 2015-11-30 | stmhal: Make uart.write() function correctly for timeout=0. | Damien George |
| 2015-11-30 | stmhal: uart.any() function now returns number of bytes available. | Ryan Shaw |
| 2015-11-26 | stmhal: Allow make DEBUG=1 to build | Dave Hylands |
| 2015-11-01 | stmhal: Add symbolic #defines for interrupt levels in irq.h. | Dave Curtis |
| 2015-10-31 | all: Add py/mphal.h and use it in all ports. | Damien George |
| 2015-10-20 | stmhal/uart: If char is not received within timeout, return EAGAIN error. | Paul Sokolovsky |
| 2015-08-07 | stamhal: Add definitions for MCU_SERIES_F4 and MCU_SERIES_F7 | Dave Hylands |
| 2015-08-03 | stmhal: Add support for USART1 and conditional pins in make-pins.py. | Damien George |
| 2015-08-03 | stmhal: Add better support for UART having Tx and Rx on different ports. | Damien George |
| 2015-08-03 | stmhal: Factor GPIO clock enable logic into mp_hal_gpio_clock_enable. | Damien George |
| 2015-07-30 | stmhal: Add STM32F7DISC and associated changes. | Dave Hylands |
| 2015-06-01 | stmhal: Add support for UART5 | Dave Hylands |
| 2015-05-27 | stmhal: Remove PYBVxx defines and use config vars for UART/CAN names. | Damien George |
| 2015-05-03 | stmhal: Allow to configure UART pins completely via mpconfigboard.h. | Eero af Heurlin |
| 2015-04-18 | stmhal: Exclude code for UARTs that don't exist in hardware. | Damien George |
| 2015-04-16 | py: Overhaul and simplify printf/pfenv mechanism. | Damien George |
| 2015-02-22 | stmhal: For UART, check that baudrate is within 5% of desired value. | Damien George |
| 2015-02-13 | stmhal: Add uart.sendbreak() method, to send a break condition. | Damien George |
| 2015-01-07 | stmhal: Collect all root pointers together in 1 place. | Damien George |
| 2015-01-01 | stmhal: Prefix includes with py/; remove need for -I../py. | Damien George |
| 2014-11-17 | stream: Convert .ioctl() to take fixed number of args. | Paul Sokolovsky |
| 2014-10-31 | stmhal: Fix UART so bits counts number of data bits, not incl parity. | Damien George |
| 2014-10-31 | stmhal: Implement support for RTS/CTS hardware flow control in UART. | Damien George |
| 2014-10-24 | stmhal: Use stream's readinto. | Damien George |
| 2014-10-23 | stmhal: Use OSError with POSIX error code for HAL errors. | Damien George |
| 2014-10-21 | stmhal: Overhaul UART class to use read/write, and improve it. | Damien George |
| 2014-10-02 | stmhal: Set is_enabled=false when creating UART object; fix doc typo. | Damien George |
| 2014-09-07 | stmhal: uart ioctl uses EINVAL, and checks TXE bit for write-ability. | Damien George |
