openmano-mpy - MicroPython source and hardware configuration for OpenMano

Age	Commit message (Collapse)	Author
2017-09-06	ports: Make new ports/ sub-directory and move all ports there.	Damien George
	This is to keep the top-level directory clean, to make it clear what is core and what is a port, and to allow the repository to grow with new ports in a sustainable way.
2016-12-05	stmhal: Refactor UART configuration to use pin objects.	Rami Ali
	This follows the pattern of other peripherals (I2C, SPI) to specify the pins using pin objects instead of a pair of GPIO port and pin number. It makes it easier to customise the UART pins for a particular board.
2016-10-18	stmhal/led: Refactor LED to use mp_hal_pin_output() init function.	Damien George
	As part of this patch the MICROPY_HW_LED_OTYPE setting is removed because it is now unused (all boards anyway had this as OUTPUT_PP).
2016-05-13	stmhal/led: Allow LEDs to be in PWM mode with TIM1 and channels 1-4.	Damien George
	This allows PYBv3 to use PWM for LED(1) and LED(2).
2016-02-06	stmhal/diskio: Introduce MICROPY_HW_HAS_FLASH setting.	Paul Sokolovsky
	To allow to reuse stmhal/diskio for ports which don't have flash but have other storage devices.
2015-12-12	stmhal: For SPI config, use HW_SPIx_SCK instead of HW_ENABLE_SPIx.	Damien George
	Previously, SPI was configured by a board defining MICROPY_HW_ENABLE_SPIx to 0 or 1. Now, the board should define MICROPY_HW_SPIx_SCK, MISO, MOSI and NSS. This makes it the same as how I2C is configured.
2015-10-29	stmhal: Make accel AVDD pin configurable via mpconfigboard.h.	Damien George

2015-05-27	stmhal: Remove PYBVxx defines and use config vars for UART/CAN names.	Damien George
	Now all stmhal-based boards can name their peripherals (if they want) to any string.
2015-05-03	stmhal: Allow to configure UART pins completely via mpconfigboard.h.	Eero af Heurlin

2015-04-18	stmhal: Make I2C busses and their pins configurable in mpconfigboard.h.	Damien George

2015-04-18	stmhal: Make HSE PLL parameters configurable per board.	Damien George

2015-03-16	stmhal: Add config option to use LSE/LSI for RTC.	Damien George
	Most boards (except the pyboard) don't have a 32kHz crystal so they should use the LSI for the RTC.
2015-01-21	stmhal: Add support for FEZ Cerb40 II board from ghielectronics.com.	Dave Hylands

2015-01-07	stmhal: Add MICROPY_HW_USB_VBUS_DETECT_PIN option, for boards without it	Damien George
	Since all currently supported boards use pin A9 for this function, the value of the macro MICROPY_HW_USB_VBUS_DETECT_PIN is not actually used, just the fact that it is defined. Addresses issue #1048.
2014-10-05	stmhal: Add config option to disable/enable CAN driver.	Damien George

2014-09-26	stmhal: Initial implementation of cc3k module and driver.	Damien George
	Pulled in and modified work done by mux/iabdalkader on cc3k driver, from iabdalkader-cc3k-update branch. That branch was terribly messy and had too many conflicts to merge neatly.
2014-06-27	Change MCU name config micro	mux

2014-06-19	Add MICROPY_HW_MICRO_NAME to boards config	mux

2014-05-03	stmhal: Wrap CC3000 driver in MICROPY_HW_ENABLE_CC3K.	Damien George
	This renames MICROPY_HW_HAS_WLAN to MICROPY_HW_ENABLE_CC3K (since it's a driver, not a board feature) and wraps all CC3000 code in this #if. It's disabled for all boards.
2014-05-02	Add shell script to automatically build stmhal/ for all pyboards.	Damien George

2014-04-20	stmhal: Improved configurability for I2C and SPI busses.	Damien George
	The HAL handles for the I2C/SPI objects are rather large, so we don't want to unnecessarily include them.
2014-03-30	stmhal: Unify naming of HW config; make SD detect configurable.	Damien George
	All board config macros now begin with MICROPY_HW_. Renamed PYBv10 to PYBV10, since macros should be all uppercase. Made SDCARD_DETECT configurable in mpconfigport.h, so that the SD detect pin can be easily configured.