| Age | Commit message (Collapse) | Author |
|---|
|
|
|
Signed-off-by: Damien George <damien@micropython.org>
|
|
To simplify config, there's no need to specify MP_PLAT_PRINT_STRN if it's
the same as the default definition in py/mpconfig.h.
Signed-off-by: Damien George <damien@micropython.org>
|
|
Changes are:
- Remove include of stm32's adc.h because it was recently changed and is
no longer compatible with teensy (and not used anyway).
- Remove define of __disable_irq in mpconfigport.h because it was clashing
with an equivalent definition in core/mk20dx128.h.
- Add -Werror to CFLAGS, and change -std=gnu99 to -std=c99.
Signed-off-by: Damien George <damien@micropython.org>
|
|
Updating to Black v20.8b1 there are two changes that affect the code in
this repository:
- If there is a trailing comma in a list (eg [], () or function call) then
that list is now written out with one line per element. So remove such
trailing commas where the list should stay on one line.
- Spaces at the start of """ doc strings are removed.
Signed-off-by: Damien George <damien@micropython.org>
|
|
The irq.h file now just provides low-level IRQ definitions and priorities.
All Python binding definitions are moved to modmachine.h, with some
renaming of pyb -> machine, and also the machine_idle definition (was
pyb_wfi) is moved to modmachine.c.
The cc3200 and teensy ports are updated to build with these changes.
Signed-off-by: Damien George <damien@micropython.org>
|
|
No functionality change is intended with this commit, it just consolidates
the separate implementations of GC helper code to the lib/utils/ directory
as a general set of helper functions useful for any port. This reduces
duplication of code, and makes it easier for future ports or embedders to
get the GC implementation correct.
Ports should now link against gchelper_native.c and either gchelper_m0.s or
gchelper_m3.s (currently only Cortex-M is supported but other architectures
can follow), or use the fallback gchelper_generic.c which will work on
x86/x64/ARM.
The gc_helper_get_sp function from gchelper_m3.s is not really GC related
and was only used by cc3200, so it has been moved to that port and renamed
to cortex_m3_get_sp.
|
|
Note: the uncrustify configuration is explicitly set to 'add' instead of
'force' in order not to alter the comments which use extra spaces after //
as a means of indenting text for clarity.
|
|
|
|
Enabled on: bare-arm, minimal, unix coverage/dev/minimal, stm32, esp32,
esp8266, cc3200, teensy, qemu-arm, nrf. Not enabled on others to be able
to test the code when the feature is disabled (the default case).
Code size change for this commit:
bare-arm: -600 -0.906%
minimal x86: -308 -0.208%
unix x64: +0 +0.000%
unix nanbox: +0 +0.000%
stm32: -3368 -0.869% PYBV10
cc3200: -1024 -0.558%
esp8266: -2512 -0.368% GENERIC
esp32: -2876 -0.205% GENERIC[incl -3168(data)]
nrf: -1708 -1.173% pca10040
samd: +0 +0.000% ADAFRUIT_ITSYBITSY_M4_EXPRESS
|
|
|
|
Using new options enabled in the uncrustify configuration.
|
|
Using new options enabled in the uncrustify configuration.
|
|
This is run with uncrustify 0.70.1, and black 19.10b0.
|
|
This string is recognised by uncrustify, to disable formatting in the
region marked by these comments. This is necessary in the qstrdef*.h files
to prevent modification of the strings within the Q(...). In other places
it is used to prevent excessive reformatting that would make the code less
readable.
|
|
This commit adds mp_raise_msg_varg(type, fmt, ...) as a helper for
nlr_raise(mp_obj_new_exception_msg_varg(type, fmt, ...)). It makes the
C-level API for raising exceptions more consistent, and reduces code size
on most ports:
bare-arm: +28 +0.042%
minimal x86: +100 +0.067%
unix x64: -56 -0.011%
unix nanbox: -300 -0.068%
stm32: -204 -0.054% PYBV10
cc3200: +0 +0.000%
esp8266: -64 -0.010% GENERIC
esp32: -104 -0.007% GENERIC
nrf: -136 -0.094% pca10040
samd: +0 +0.000% ADAFRUIT_ITSYBITSY_M4_EXPRESS
|
|
Even though it doesn't return anything it could still be used like a
function. Addresses issue #5501.
|
|
For the 3 ports that already make use of this feature (stm32, nrf and
teensy) this doesn't make any difference, it just allows to disable it from
now on.
For other ports that use pyexec, this decreases code size because the debug
printing code is dead (it can't be enabled) but the compiler can't deduce
that, so code is still emitted.
|
|
Many ports already allow overriding CROSS_COMPILE. This modifies the
remaining ports to allow it as well.
|
|
|
|
The stm32 and nrf ports already had the behaviour that they would first
check if the script exists before executing it, and this patch makes all
other ports work the same way. This helps when developing apps because
it's hard to tell (when unconditionally trying to execute the scripts) if
the resulting OSError at boot up comes from missing boot.py or main.py, or
from some other error. And it's not really an error if these scripts don't
exist.
|
|
Replaces "PYB: soft reboot" with "MPY: soft reboot", etc.
Having a consistent prefix across ports reduces the difference between
ports, which is a general goal. And this change won't break pyboard.py
because that tool only looks for "soft reboot".
|
|
|
|
|
|
|
|
The individual union members (like SPI, I2C) are never used, only the
generic "reg" entry is. And the union names can clash with macro
definitions in the HAL so better to remove them.
|
|
|
|
|
|
Header files that are considered internal to the py core and should not
normally be included directly are:
py/nlr.h - internal nlr configuration and declarations
py/bc0.h - contains bytecode macro definitions
py/runtime0.h - contains basic runtime enums
Instead, the top-level header files to include are one of:
py/obj.h - includes runtime0.h and defines everything to use the
mp_obj_t type
py/runtime.h - includes mpstate.h and hence nlr.h, obj.h, runtime0.h,
and defines everything to use the general runtime support functions
Additional, specific headers (eg py/objlist.h) can be included if needed.
|
|
As a pointer (const char *) it takes up an extra word of storage which is
in RAM.
|
|
Also renames "stmhal" to "stm32" in documentation and everywhere else.
|
|
This is to keep the top-level directory clean, to make it clear what is
core and what is a port, and to allow the repository to grow with new ports
in a sustainable way.
|
