openmano-mpy - MicroPython source and hardware configuration for OpenMano

Age	Commit message (Collapse)	Author
2017-09-06	ports: Make new ports/ sub-directory and move all ports there.	Damien George
	This is to keep the top-level directory clean, to make it clear what is core and what is a port, and to allow the repository to grow with new ports in a sustainable way.
2017-07-31	all: Use the name MicroPython consistently in comments	Alexander Steffen
	There were several different spellings of MicroPython present in comments, when there should be only one.
2015-10-31	all: Add py/mphal.h and use it in all ports.	Damien George
	py/mphal.h contains declarations for generic mp_hal_XXX functions, such as stdio and delay/ticks, which ports should provide definitions for. A port will also provide mphalport.h with further HAL declarations.
2015-08-16	cc3200: Remove unneeded loops in the FreeRTOS hooks.	Daniel Campora

2015-06-04	cc3200: Do not kick the watchdog inside the idle task.	Daniel Campora

2015-02-28	cc3200: Add heartbeat signal on system led.	danicampora

2015-02-25	cc3200: Implement safe boot pin and system led behaviour.	danicampora
	The safe boot pin, when pulled high during reset rolls back the firmware to the "factory" image and skips execution of 'boot.py' and 'main.py'. This is useful to recover from a crash condition. The system led is used mostly to signal errors.
2015-02-25	cc3200: Add WDT functionality as part of the pyb module.	danicampora
	Also improve pybsd, and make it save it's pin configuration. This is a necessary step towards supporting the CC3200 low power deep sleep (LPDS) mode.
2015-02-22	cc3200: Remove dependencies from FreeRTOS.	danicampora
	Use the simplelink wrappers instead. This is one step further towards having a single module for the cc3200 and the cc3100.
2015-02-21	cc3200: Add explicit py/ path-prefix for py includes.	Damien George
	This is how it should be, so one knows exactly where the includes are coming from.
2015-02-13	stmhal: Make pybstdio usable by other ports, and use it.	Damien George
	Now all ports can use pybstdio.c to provide sys.stdin/stdout/stderr, so long as they implement mp_hal_stdin_* and mp_hal_stdout_* functions.
2015-02-06	cc3200: Add cc3200 port of MicroPython.	danicampora
	The port currently implements support for GPIO, RTC, ExtInt and the WiFi subsystem. A small file system is available in the serial flash. A bootloader which makes OTA updates possible, is also part of this initial implementation.