| Age | Commit message (Collapse) | Author |
|---|
|
This is to keep the top-level directory clean, to make it clear what is
core and what is a port, and to allow the repository to grow with new ports
in a sustainable way.
|
|
There were several different spellings of MicroPython present in comments,
when there should be only one.
|
|
To allow access and testing without complex access methods like WiFi.
Enabled for both WiPy and TI LaunchXL.
|
|
|
|
|
|
This is how the names will be printed on the sticker that goes on top
of the EMI shield. The shorter names also help saving a few bytes of
RAM and ROM.
|
|
|
|
|
|
In general the changes are:
1. Peripheral (UART, SPI, ADC, I2C, Timer) IDs start from 1, not zero.
2. Make I2C and SPI require the ID even when there's only one bus.
3. Make I2C and SPI accept 'mode' parameter even though only MASTER
is supported.
|
|
|
|
|
|
Current version has been numbered as 0.9.0 since Timers/PWM support
is still missing.
|
|
|
|
This allows to properly initialize the system led and add it
to the sleep module so that it can be restored when resuming
from suspended mode.
|
|
|
|
Supports suspend and hibernate modes. Waking is possible throug GPIO
and WLAN.
The mpcallback class is generic and can be reused by other classes.
|
|
The safe boot pin, when pulled high during reset rolls back the
firmware to the "factory" image and skips execution of 'boot.py'
and 'main.py'. This is useful to recover from a crash condition.
The system led is used mostly to signal errors.
|
|
|
|
I2C objects can be freed by the GC and a __del__ method is provided
in order to de-init the peripheral prior to being garbage collected.
UART objects are now added to a local list and this list is now part
of the VM_STATE.
|
|
The port currently implements support for GPIO, RTC, ExtInt and the WiFi
subsystem. A small file system is available in the serial flash. A
bootloader which makes OTA updates possible, is also part of this initial
implementation.
|
