diff options
Diffstat (limited to 'stmhal/usbhost/Core/Src/usbh_conf_template.c')
| -rw-r--r-- | stmhal/usbhost/Core/Src/usbh_conf_template.c | 270 |
1 files changed, 270 insertions, 0 deletions
diff --git a/stmhal/usbhost/Core/Src/usbh_conf_template.c b/stmhal/usbhost/Core/Src/usbh_conf_template.c new file mode 100644 index 000000000..1c25f7b2e --- /dev/null +++ b/stmhal/usbhost/Core/Src/usbh_conf_template.c @@ -0,0 +1,270 @@ +/**
+ ******************************************************************************
+ * @file usb_bsp.c
+ * @author MCD Application Team
+ * @version V3.0.0
+ * @date 18-February-2014
+ * @brief This file implements the board support package for the USB host library
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT 2014 STMicroelectronics</center></h2>
+ *
+ * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
+ * You may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at:
+ *
+ * http://www.st.com/software_license_agreement_liberty_v2
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ *
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "usbh_core.h"
+
+/**
+ * @brief USBH_LL_Init
+ * Initialize the Low Level portion of the Host driver.
+ * @param phost: Host handle
+ * @retval USBH Status
+ */
+USBH_StatusTypeDef USBH_LL_Init (USBH_HandleTypeDef *phost)
+{
+
+ return USBH_OK;
+}
+
+/**
+ * @brief USBH_LL_DeInit
+ * De-Initialize the Low Level portion of the Host driver.
+ * @param phost: Host handle
+ * @retval USBH Status
+ */
+USBH_StatusTypeDef USBH_LL_DeInit (USBH_HandleTypeDef *phost)
+{
+
+ return USBH_OK;
+}
+
+/**
+ * @brief USBH_LL_Start
+ * Start the Low Level portion of the Host driver.
+ * @param phost: Host handle
+ * @retval USBH Status
+ */
+USBH_StatusTypeDef USBH_LL_Start(USBH_HandleTypeDef *phost)
+{
+
+ return USBH_OK;
+}
+
+/**
+ * @brief USBH_LL_Stop
+ * Stop the Low Level portion of the Host driver.
+ * @param phost: Host handle
+ * @retval USBH Status
+ */
+USBH_StatusTypeDef USBH_LL_Stop (USBH_HandleTypeDef *phost)
+{
+
+ return USBH_OK;
+}
+
+/**
+ * @brief USBH_LL_GetSpeed
+ * Return the USB Host Speed from the Low Level Driver.
+ * @param phost: Host handle
+ * @retval USBH Speeds
+ */
+USBH_SpeedTypeDef USBH_LL_GetSpeed (USBH_HandleTypeDef *phost)
+{
+ USBH_SpeedTypeDef speed = 0;
+
+
+ return speed;
+}
+
+/**
+ * @brief USBH_LL_ResetPort
+ * Reset the Host Port of the Low Level Driver.
+ * @param phost: Host handle
+ * @retval USBH Status
+ */
+USBH_StatusTypeDef USBH_LL_ResetPort (USBH_HandleTypeDef *phost)
+{
+
+ return USBH_OK;
+}
+
+/**
+ * @brief USBH_LL_GetLastXferSize
+ * Return the last transfered packet size.
+ * @param phost: Host handle
+ * @param pipe: Pipe index
+ * @retval Packet Size
+ */
+uint32_t USBH_LL_GetLastXferSize (USBH_HandleTypeDef *phost, uint8_t pipe)
+{
+
+}
+
+/**
+ * @brief USBH_LL_OpenPipe
+ * Open a pipe of the Low Level Driver.
+ * @param phost: Host handle
+ * @param pipe_num: Pipe index
+ * @param epnum: Endpoint Number
+ * @param dev_address: Device USB address
+ * @param speed: Device Speed
+ * @param ep_type: Endpoint Type
+ * @param mps: Endpoint Max Packet Size
+ * @retval USBH Status
+ */
+USBH_StatusTypeDef USBH_LL_OpenPipe (USBH_HandleTypeDef *phost,
+ uint8_t pipe_num,
+ uint8_t epnum,
+ uint8_t dev_address,
+ uint8_t speed,
+ uint8_t ep_type,
+ uint16_t mps)
+{
+
+ return USBH_OK;
+}
+
+/**
+ * @brief USBH_LL_ClosePipe
+ * Close a pipe of the Low Level Driver.
+ * @param phost: Host handle
+ * @param pipe_num: Pipe index
+ * @retval USBH Status
+ */
+USBH_StatusTypeDef USBH_LL_ClosePipe (USBH_HandleTypeDef *phost, uint8_t pipe)
+{
+
+}
+/**
+ * @brief USBH_LL_SubmitURB
+ * Submit a new URB to the low level driver.
+ * @param phost: Host handle
+ * @param pipe: Pipe index
+ * This parameter can be a value from 1 to 15
+ * @param direction : Channel number
+ * This parameter can be one of the these values:
+ * 0 : Output
+ * 1 : Input
+ * @param ep_type : Endpoint Type
+ * This parameter can be one of the these values:
+ * @arg EP_TYPE_CTRL: Control type
+ * @arg EP_TYPE_ISOC: Isochrounous type
+ * @arg EP_TYPE_BULK: Bulk type
+ * @arg EP_TYPE_INTR: Interrupt type
+ * @param token : Endpoint Type
+ * This parameter can be one of the these values:
+ * @arg 0: PID_SETUP
+ * @arg 1: PID_DATA
+ * @param pbuff : pointer to URB data
+ * @param length : Length of URB data
+ * @param do_ping : activate do ping protocol (for high speed only)
+ * This parameter can be one of the these values:
+ * 0 : do ping inactive
+ * 1 : do ping active
+ * @retval Status
+ */
+
+USBH_StatusTypeDef USBH_LL_SubmitURB (USBH_HandleTypeDef *phost,
+ uint8_t pipe,
+ uint8_t direction ,
+ uint8_t ep_type,
+ uint8_t token,
+ uint8_t* pbuff,
+ uint16_t length,
+ uint8_t do_ping )
+{
+
+ return USBH_OK;
+}
+
+/**
+ * @brief USBH_LL_GetURBState
+ * Get a URB state from the low level driver.
+ * @param phost: Host handle
+ * @param pipe: Pipe index
+ * This parameter can be a value from 1 to 15
+ * @retval URB state
+ * This parameter can be one of the these values:
+ * @arg URB_IDLE
+ * @arg URB_DONE
+ * @arg URB_NOTREADY
+ * @arg URB_NYET
+ * @arg URB_ERROR
+ * @arg URB_STALL
+ */
+USBH_URBStateTypeDef USBH_LL_GetURBState (USBH_HandleTypeDef *phost, uint8_t pipe)
+{
+
+}
+
+/**
+ * @brief USBH_LL_DriverVBUS
+ * Drive VBUS.
+ * @param phost: Host handle
+ * @param state : VBUS state
+ * This parameter can be one of the these values:
+ * 0 : VBUS Active
+ * 1 : VBUS Inactive
+ * @retval Status
+ */
+
+USBH_StatusTypeDef USBH_LL_DriverVBUS (USBH_HandleTypeDef *phost, uint8_t state)
+{
+
+ return USBH_OK;
+}
+
+/**
+ * @brief USBH_LL_SetToggle
+ * Set toggle for a pipe.
+ * @param phost: Host handle
+ * @param pipe: Pipe index
+ * @param pipe_num: Pipe index
+ * @param toggle: toggle (0/1)
+ * @retval Status
+ */
+USBH_StatusTypeDef USBH_LL_SetToggle (USBH_HandleTypeDef *phost, uint8_t pipe, uint8_t toggle)
+{
+
+ return USBH_OK;
+}
+
+/**
+ * @brief USBH_LL_GetToggle
+ * Return the current toggle of a pipe.
+ * @param phost: Host handle
+ * @param pipe: Pipe index
+ * @retval toggle (0/1)
+ */
+uint8_t USBH_LL_GetToggle (USBH_HandleTypeDef *phost, uint8_t pipe)
+{
+ uint8_t toggle = 0;
+
+
+ return toggle;
+}
+/**
+ * @brief USBH_Delay
+ * Delay routine for the USB Host Library
+ * @param Delay: Delay in ms
+ * @retval None
+ */
+void USBH_Delay (uint32_t Delay)
+{
+
+}
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|