diff options
Diffstat (limited to 'stmhal/hal/l4/src/stm32l4xx_hal_pcd_ex.c')
| -rw-r--r-- | stmhal/hal/l4/src/stm32l4xx_hal_pcd_ex.c | 323 |
1 files changed, 0 insertions, 323 deletions
diff --git a/stmhal/hal/l4/src/stm32l4xx_hal_pcd_ex.c b/stmhal/hal/l4/src/stm32l4xx_hal_pcd_ex.c deleted file mode 100644 index 29a85da6a..000000000 --- a/stmhal/hal/l4/src/stm32l4xx_hal_pcd_ex.c +++ /dev/null @@ -1,323 +0,0 @@ -/** - ****************************************************************************** - * @file stm32l4xx_hal_pcd_ex.c - * @author MCD Application Team - * @version V1.3.0 - * @date 29-January-2016 - * @brief PCD Extended HAL module driver. - * This file provides firmware functions to manage the following - * functionalities of the USB Peripheral Controller: - * + Extended features functions - * - ****************************************************************************** - * @attention - * - * <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2> - * - * Redistribution and use in source and binary forms, with or without modification, - * are permitted provided that the following conditions are met: - * 1. Redistributions of source code must retain the above copyright notice, - * this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following disclaimer in the documentation - * and/or other materials provided with the distribution. - * 3. Neither the name of STMicroelectronics nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER - * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, - * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - ****************************************************************************** - */ - -/* Includes ------------------------------------------------------------------*/ -#include "stm32l4xx_hal.h" - -#if defined(STM32L475xx) || defined(STM32L476xx) || defined(STM32L485xx) || defined(STM32L486xx) - -/** @addtogroup STM32L4xx_HAL_Driver - * @{ - */ - -/** @defgroup PCDEx PCDEx - * @brief PCD Extended HAL module driver - * @{ - */ -#ifdef HAL_PCD_MODULE_ENABLED - -/* Private types -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -/* Private constants ---------------------------------------------------------*/ -/* Private macros ------------------------------------------------------------*/ -/* Private functions ---------------------------------------------------------*/ -/* Exported functions --------------------------------------------------------*/ - -/** @defgroup PCDEx_Exported_Functions PCDEx Exported Functions - * @{ - */ - -/** @defgroup PCDEx_Exported_Functions_Group1 Peripheral Control functions - * @brief PCDEx control functions - * -@verbatim - =============================================================================== - ##### Extended features functions ##### - =============================================================================== - [..] This section provides functions allowing to: - (+) Update FIFO configuration - -@endverbatim - * @{ - */ - -/** - * @brief Set Tx FIFO - * @param hpcd: PCD handle - * @param fifo: The number of Tx fifo - * @param size: Fifo size - * @retval HAL status - */ -HAL_StatusTypeDef HAL_PCDEx_SetTxFiFo(PCD_HandleTypeDef *hpcd, uint8_t fifo, uint16_t size) -{ - uint8_t i = 0; - uint32_t Tx_Offset = 0; - - /* TXn min size = 16 words. (n : Transmit FIFO index) - When a TxFIFO is not used, the Configuration should be as follows: - case 1 : n > m and Txn is not used (n,m : Transmit FIFO indexes) - --> Txm can use the space allocated for Txn. - case2 : n < m and Txn is not used (n,m : Transmit FIFO indexes) - --> Txn should be configured with the minimum space of 16 words - The FIFO is used optimally when used TxFIFOs are allocated in the top - of the FIFO.Ex: use EP1 and EP2 as IN instead of EP1 and EP3 as IN ones. - When DMA is used 3n * FIFO locations should be reserved for internal DMA registers */ - - Tx_Offset = hpcd->Instance->GRXFSIZ; - - if(fifo == 0) - { - hpcd->Instance->DIEPTXF0_HNPTXFSIZ = (size << 16) | Tx_Offset; - } - else - { - Tx_Offset += (hpcd->Instance->DIEPTXF0_HNPTXFSIZ) >> 16; - for (i = 0; i < (fifo - 1); i++) - { - Tx_Offset += (hpcd->Instance->DIEPTXF[i] >> 16); - } - - /* Multiply Tx_Size by 2 to get higher performance */ - hpcd->Instance->DIEPTXF[fifo - 1] = (size << 16) | Tx_Offset; - } - - return HAL_OK; -} - -/** - * @brief Set Rx FIFO - * @param hpcd: PCD handle - * @param size: Size of Rx fifo - * @retval HAL status - */ -HAL_StatusTypeDef HAL_PCDEx_SetRxFiFo(PCD_HandleTypeDef *hpcd, uint16_t size) -{ - hpcd->Instance->GRXFSIZ = size; - - return HAL_OK; -} - -/** - * @brief Activate LPM feature. - * @param hpcd: PCD handle - * @retval HAL status - */ -HAL_StatusTypeDef HAL_PCDEx_ActivateLPM(PCD_HandleTypeDef *hpcd) -{ - USB_OTG_GlobalTypeDef *USBx = hpcd->Instance; - - hpcd->lpm_active = ENABLE; - hpcd->LPM_State = LPM_L0; - USBx->GINTMSK |= USB_OTG_GINTMSK_LPMINTM; - USBx->GLPMCFG |= (USB_OTG_GLPMCFG_LPMEN | USB_OTG_GLPMCFG_LPMACK | USB_OTG_GLPMCFG_ENBESL); - - return HAL_OK; -} - -/** - * @brief Deactivate LPM feature. - * @param hpcd: PCD handle - * @retval HAL status - */ -HAL_StatusTypeDef HAL_PCDEx_DeActivateLPM(PCD_HandleTypeDef *hpcd) -{ - USB_OTG_GlobalTypeDef *USBx = hpcd->Instance; - - hpcd->lpm_active = DISABLE; - USBx->GINTMSK &= ~USB_OTG_GINTMSK_LPMINTM; - USBx->GLPMCFG &= ~(USB_OTG_GLPMCFG_LPMEN | USB_OTG_GLPMCFG_LPMACK | USB_OTG_GLPMCFG_ENBESL); - - return HAL_OK; -} - -/** - * @brief Handle BatteryCharging Process. - * @param hpcd: PCD handle - * @retval HAL status - */ -void HAL_PCDEx_BCD_VBUSDetect(PCD_HandleTypeDef *hpcd) -{ - USB_OTG_GlobalTypeDef *USBx = hpcd->Instance; - uint32_t tickstart = HAL_GetTick(); - - /* Start BCD When device is connected */ - if (USBx_DEVICE->DCTL & USB_OTG_DCTL_SDIS) - { - /* Enable DCD : Data Contact Detect */ - USBx->GCCFG |= USB_OTG_GCCFG_DCDEN; - - /* Wait Detect flag or a timeout is happen*/ - while ((USBx->GCCFG & USB_OTG_GCCFG_DCDET) == 0) - { - /* Check for the Timeout */ - if((HAL_GetTick() - tickstart ) > 1000) - { - HAL_PCDEx_BCD_Callback(hpcd, PCD_BCD_ERROR); - return; - } - } - - /* Right response got */ - HAL_Delay(100); - - /* Check Detect flag*/ - if (USBx->GCCFG & USB_OTG_GCCFG_DCDET) - { - HAL_PCDEx_BCD_Callback(hpcd, PCD_BCD_CONTACT_DETECTION); - } - - /*Primary detection: checks if connected to Standard Downstream Port - (without charging capability) */ - USBx->GCCFG &=~ USB_OTG_GCCFG_DCDEN; - USBx->GCCFG |= USB_OTG_GCCFG_PDEN; - HAL_Delay(100); - - if (!(USBx->GCCFG & USB_OTG_GCCFG_PDET)) - { - /* Case of Standard Downstream Port */ - HAL_PCDEx_BCD_Callback(hpcd, PCD_BCD_STD_DOWNSTREAM_PORT); - } - else - { - /* start secondary detection to check connection to Charging Downstream - Port or Dedicated Charging Port */ - USBx->GCCFG &=~ USB_OTG_GCCFG_PDEN; - USBx->GCCFG |= USB_OTG_GCCFG_SDEN; - HAL_Delay(100); - - if ((USBx->GCCFG) & USB_OTG_GCCFG_SDET) - { - /* case Dedicated Charging Port */ - HAL_PCDEx_BCD_Callback(hpcd, PCD_BCD_DEDICATED_CHARGING_PORT); - } - else - { - /* case Charging Downstream Port */ - HAL_PCDEx_BCD_Callback(hpcd, PCD_BCD_CHARGING_DOWNSTREAM_PORT); - } - } - /* Battery Charging capability discovery finished */ - HAL_PCDEx_BCD_Callback(hpcd, PCD_BCD_DISCOVERY_COMPLETED); - } -} - -/** - * @brief Activate BatteryCharging feature. - * @param hpcd: PCD handle - * @retval HAL status - */ -HAL_StatusTypeDef HAL_PCDEx_ActivateBCD(PCD_HandleTypeDef *hpcd) -{ - USB_OTG_GlobalTypeDef *USBx = hpcd->Instance; - - hpcd->battery_charging_active = ENABLE; - USBx->GCCFG |= (USB_OTG_GCCFG_BCDEN); - - return HAL_OK; -} - -/** - * @brief Deactivate BatteryCharging feature. - * @param hpcd: PCD handle - * @retval HAL status - */ -HAL_StatusTypeDef HAL_PCDEx_DeActivateBCD(PCD_HandleTypeDef *hpcd) -{ - USB_OTG_GlobalTypeDef *USBx = hpcd->Instance; - hpcd->battery_charging_active = DISABLE; - USBx->GCCFG &= ~(USB_OTG_GCCFG_BCDEN); - return HAL_OK; -} - -/** - * @brief Send LPM message to user layer callback. - * @param hpcd: PCD handle - * @param msg: LPM message - * @retval HAL status - */ -__weak void HAL_PCDEx_LPM_Callback(PCD_HandleTypeDef *hpcd, PCD_LPM_MsgTypeDef msg) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(hpcd); - UNUSED(msg); - - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_PCDEx_LPM_Callback could be implemented in the user file - */ -} - -/** - * @brief Send BatteryCharging message to user layer callback. - * @param hpcd: PCD handle - * @param msg: LPM message - * @retval HAL status - */ -__weak void HAL_PCDEx_BCD_Callback(PCD_HandleTypeDef *hpcd, PCD_BCD_MsgTypeDef msg) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(hpcd); - UNUSED(msg); - - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_PCDEx_BCD_Callback could be implemented in the user file - */ -} - -/** - * @} - */ - -/** - * @} - */ - -#endif /* HAL_PCD_MODULE_ENABLED */ -/** - * @} - */ - -/** - * @} - */ - -#endif /* STM32L475xx || STM32L476xx || STM32L485xx || STM32L486xx */ - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ |