diff options
Diffstat (limited to 'stmhal/hal/l4/inc/stm32l4xx_hal_pwr.h')
| -rw-r--r-- | stmhal/hal/l4/inc/stm32l4xx_hal_pwr.h | 427 |
1 files changed, 0 insertions, 427 deletions
diff --git a/stmhal/hal/l4/inc/stm32l4xx_hal_pwr.h b/stmhal/hal/l4/inc/stm32l4xx_hal_pwr.h deleted file mode 100644 index 4553bf74c..000000000 --- a/stmhal/hal/l4/inc/stm32l4xx_hal_pwr.h +++ /dev/null @@ -1,427 +0,0 @@ -/** - ****************************************************************************** - * @file stm32l4xx_hal_pwr.h - * @author MCD Application Team - * @version V1.3.0 - * @date 29-January-2016 - * @brief Header file of PWR HAL module. - ****************************************************************************** - * @attention - * - * <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2> - * - * Redistribution and use in source and binary forms, with or without modification, - * are permitted provided that the following conditions are met: - * 1. Redistributions of source code must retain the above copyright notice, - * this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following disclaimer in the documentation - * and/or other materials provided with the distribution. - * 3. Neither the name of STMicroelectronics nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER - * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, - * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32L4xx_HAL_PWR_H -#define __STM32L4xx_HAL_PWR_H - -#ifdef __cplusplus - extern "C" { -#endif - -/* Includes ------------------------------------------------------------------*/ -#include "stm32l4xx_hal_def.h" - -/** @addtogroup STM32L4xx_HAL_Driver - * @{ - */ - -/** @addtogroup PWR - * @{ - */ - -/* Exported types ------------------------------------------------------------*/ - -/** @defgroup PWR_Exported_Types PWR Exported Types - * @{ - */ - -/** - * @brief PWR PVD configuration structure definition - */ -typedef struct -{ - uint32_t PVDLevel; /*!< PVDLevel: Specifies the PVD detection level. - This parameter can be a value of @ref PWR_PVD_detection_level. */ - - uint32_t Mode; /*!< Mode: Specifies the operating mode for the selected pins. - This parameter can be a value of @ref PWR_PVD_Mode. */ -}PWR_PVDTypeDef; - - -/** - * @} - */ - -/* Exported constants --------------------------------------------------------*/ - -/** @defgroup PWR_Exported_Constants PWR Exported Constants - * @{ - */ - - -/** @defgroup PWR_PVD_detection_level Programmable Voltage Detection levels - * @{ - */ -#define PWR_PVDLEVEL_0 PWR_CR2_PLS_LEV0 /*!< PVD threshold around 2.0 V */ -#define PWR_PVDLEVEL_1 PWR_CR2_PLS_LEV1 /*!< PVD threshold around 2.2 V */ -#define PWR_PVDLEVEL_2 PWR_CR2_PLS_LEV2 /*!< PVD threshold around 2.4 V */ -#define PWR_PVDLEVEL_3 PWR_CR2_PLS_LEV3 /*!< PVD threshold around 2.5 V */ -#define PWR_PVDLEVEL_4 PWR_CR2_PLS_LEV4 /*!< PVD threshold around 2.6 V */ -#define PWR_PVDLEVEL_5 PWR_CR2_PLS_LEV5 /*!< PVD threshold around 2.8 V */ -#define PWR_PVDLEVEL_6 PWR_CR2_PLS_LEV6 /*!< PVD threshold around 2.9 V */ -#define PWR_PVDLEVEL_7 PWR_CR2_PLS_LEV7 /*!< External input analog voltage (compared internally to VREFINT) */ -/** - * @} - */ - -/** @defgroup PWR_PVD_Mode PWR PVD interrupt and event mode - * @{ - */ -#define PWR_PVD_MODE_NORMAL ((uint32_t)0x00000000) /*!< Basic mode is used */ -#define PWR_PVD_MODE_IT_RISING ((uint32_t)0x00010001) /*!< External Interrupt Mode with Rising edge trigger detection */ -#define PWR_PVD_MODE_IT_FALLING ((uint32_t)0x00010002) /*!< External Interrupt Mode with Falling edge trigger detection */ -#define PWR_PVD_MODE_IT_RISING_FALLING ((uint32_t)0x00010003) /*!< External Interrupt Mode with Rising/Falling edge trigger detection */ -#define PWR_PVD_MODE_EVENT_RISING ((uint32_t)0x00020001) /*!< Event Mode with Rising edge trigger detection */ -#define PWR_PVD_MODE_EVENT_FALLING ((uint32_t)0x00020002) /*!< Event Mode with Falling edge trigger detection */ -#define PWR_PVD_MODE_EVENT_RISING_FALLING ((uint32_t)0x00020003) /*!< Event Mode with Rising/Falling edge trigger detection */ -/** - * @} - */ - - - - -/** @defgroup PWR_Regulator_state_in_SLEEP_STOP_mode PWR regulator mode - * @{ - */ -#define PWR_MAINREGULATOR_ON ((uint32_t)0x00000000) /*!< Regulator in main mode */ -#define PWR_LOWPOWERREGULATOR_ON PWR_CR1_LPR /*!< Regulator in low-power mode */ -/** - * @} - */ - -/** @defgroup PWR_SLEEP_mode_entry PWR SLEEP mode entry - * @{ - */ -#define PWR_SLEEPENTRY_WFI ((uint8_t)0x01) /*!< Wait For Interruption instruction to enter Sleep mode */ -#define PWR_SLEEPENTRY_WFE ((uint8_t)0x02) /*!< Wait For Event instruction to enter Sleep mode */ -/** - * @} - */ - -/** @defgroup PWR_STOP_mode_entry PWR STOP mode entry - * @{ - */ -#define PWR_STOPENTRY_WFI ((uint8_t)0x01) /*!< Wait For Interruption instruction to enter Stop mode */ -#define PWR_STOPENTRY_WFE ((uint8_t)0x02) /*!< Wait For Event instruction to enter Stop mode */ -/** - * @} - */ - - -/** @defgroup PWR_PVD_EXTI_LINE PWR PVD external interrupt line - * @{ - */ -#define PWR_EXTI_LINE_PVD ((uint32_t)0x00010000) /*!< External interrupt line 16 Connected to the PVD EXTI Line */ -/** - * @} - */ - -/** @defgroup PWR_PVD_EVENT_LINE PWR PVD event line - * @{ - */ -#define PWR_EVENT_LINE_PVD ((uint32_t)0x00010000) /*!< Event line 16 Connected to the PVD Event Line */ -/** - * @} - */ - -/** - * @} - */ - -/* Exported macros -----------------------------------------------------------*/ -/** @defgroup PWR_Exported_Macros PWR Exported Macros - * @{ - */ - -/** @brief Check whether or not a specific PWR flag is set. - * @param __FLAG__: specifies the flag to check. - * This parameter can be one of the following values: - * @arg @ref PWR_FLAG_WUF1 Wake Up Flag 1. Indicates that a wakeup event - * was received from the WKUP pin 1. - * @arg @ref PWR_FLAG_WUF2 Wake Up Flag 2. Indicates that a wakeup event - * was received from the WKUP pin 2. - * @arg @ref PWR_FLAG_WUF3 Wake Up Flag 3. Indicates that a wakeup event - * was received from the WKUP pin 3. - * @arg @ref PWR_FLAG_WUF4 Wake Up Flag 4. Indicates that a wakeup event - * was received from the WKUP pin 4. - * @arg @ref PWR_FLAG_WUF5 Wake Up Flag 5. Indicates that a wakeup event - * was received from the WKUP pin 5. - * @arg @ref PWR_FLAG_SB StandBy Flag. Indicates that the system - * entered StandBy mode. - * @arg @ref PWR_FLAG_WUFI Wake-Up Flag Internal. Set when a wakeup is detected on - * the internal wakeup line. - * @arg @ref PWR_FLAG_REGLPS Low Power Regulator Started. Indicates whether or not the - * low-power regulator is ready. - * @arg @ref PWR_FLAG_REGLPF Low Power Regulator Flag. Indicates whether the - * regulator is ready in main mode or is in low-power mode. - * @arg @ref PWR_FLAG_VOSF Voltage Scaling Flag. Indicates whether the regulator is ready - * in the selected voltage range or is still changing to the required voltage level. - * @arg @ref PWR_FLAG_PVDO Power Voltage Detector Output. Indicates whether VDD voltage is - * below or above the selected PVD threshold. - * @arg @ref PWR_FLAG_PVMO1 Peripheral Voltage Monitoring Output 1. Indicates whether VDDUSB voltage is - * is below or above PVM1 threshold (applicable when USB feature is supported). - * @arg @ref PWR_FLAG_PVMO2 Peripheral Voltage Monitoring Output 2. Indicates whether VDDIO2 voltage is - * is below or above PVM2 threshold (applicable when VDDIO2 is present on device). - * @arg @ref PWR_FLAG_PVMO3 Peripheral Voltage Monitoring Output 3. Indicates whether VDDA voltage is - * is below or above PVM3 threshold. - * @arg @ref PWR_FLAG_PVMO4 Peripheral Voltage Monitoring Output 4. Indicates whether VDDA voltage is - * is below or above PVM4 threshold. - * - * @retval The new state of __FLAG__ (TRUE or FALSE). - */ -#define __HAL_PWR_GET_FLAG(__FLAG__) ( ((((uint8_t)(__FLAG__)) >> 5U) == 1) ?\ - (PWR->SR1 & (1U << ((__FLAG__) & 31U))) :\ - (PWR->SR2 & (1U << ((__FLAG__) & 31U))) ) - -/** @brief Clear a specific PWR flag. - * @param __FLAG__: specifies the flag to clear. - * This parameter can be one of the following values: - * @arg @ref PWR_FLAG_WUF1 Wake Up Flag 1. Indicates that a wakeup event - * was received from the WKUP pin 1. - * @arg @ref PWR_FLAG_WUF2 Wake Up Flag 2. Indicates that a wakeup event - * was received from the WKUP pin 2. - * @arg @ref PWR_FLAG_WUF3 Wake Up Flag 3. Indicates that a wakeup event - * was received from the WKUP pin 3. - * @arg @ref PWR_FLAG_WUF4 Wake Up Flag 4. Indicates that a wakeup event - * was received from the WKUP pin 4. - * @arg @ref PWR_FLAG_WUF5 Wake Up Flag 5. Indicates that a wakeup event - * was received from the WKUP pin 5. - * @arg @ref PWR_FLAG_WU Encompasses all five Wake Up Flags. - * @arg @ref PWR_FLAG_SB Standby Flag. Indicates that the system - * entered Standby mode. - * @retval None - */ -#define __HAL_PWR_CLEAR_FLAG(__FLAG__) ( (((uint8_t)(__FLAG__)) == PWR_FLAG_WU) ?\ - (PWR->SCR = (__FLAG__)) :\ - (PWR->SCR = (1U << ((__FLAG__) & 31U))) ) -/** - * @brief Enable the PVD Extended Interrupt Line. - * @retval None - */ -#define __HAL_PWR_PVD_EXTI_ENABLE_IT() SET_BIT(EXTI->IMR1, PWR_EXTI_LINE_PVD) - -/** - * @brief Disable the PVD Extended Interrupt Line. - * @retval None - */ -#define __HAL_PWR_PVD_EXTI_DISABLE_IT() CLEAR_BIT(EXTI->IMR1, PWR_EXTI_LINE_PVD) - -/** - * @brief Enable the PVD Event Line. - * @retval None - */ -#define __HAL_PWR_PVD_EXTI_ENABLE_EVENT() SET_BIT(EXTI->EMR1, PWR_EVENT_LINE_PVD) - -/** - * @brief Disable the PVD Event Line. - * @retval None - */ -#define __HAL_PWR_PVD_EXTI_DISABLE_EVENT() CLEAR_BIT(EXTI->EMR1, PWR_EVENT_LINE_PVD) - -/** - * @brief Enable the PVD Extended Interrupt Rising Trigger. - * @retval None - */ -#define __HAL_PWR_PVD_EXTI_ENABLE_RISING_EDGE() SET_BIT(EXTI->RTSR1, PWR_EXTI_LINE_PVD) - -/** - * @brief Disable the PVD Extended Interrupt Rising Trigger. - * @retval None - */ -#define __HAL_PWR_PVD_EXTI_DISABLE_RISING_EDGE() CLEAR_BIT(EXTI->RTSR1, PWR_EXTI_LINE_PVD) - -/** - * @brief Enable the PVD Extended Interrupt Falling Trigger. - * @retval None - */ -#define __HAL_PWR_PVD_EXTI_ENABLE_FALLING_EDGE() SET_BIT(EXTI->FTSR1, PWR_EXTI_LINE_PVD) - - -/** - * @brief Disable the PVD Extended Interrupt Falling Trigger. - * @retval None - */ -#define __HAL_PWR_PVD_EXTI_DISABLE_FALLING_EDGE() CLEAR_BIT(EXTI->FTSR1, PWR_EXTI_LINE_PVD) - - -/** - * @brief Enable the PVD Extended Interrupt Rising & Falling Trigger. - * @retval None - */ -#define __HAL_PWR_PVD_EXTI_ENABLE_RISING_FALLING_EDGE() \ - do { \ - __HAL_PWR_PVD_EXTI_ENABLE_RISING_EDGE(); \ - __HAL_PWR_PVD_EXTI_ENABLE_FALLING_EDGE(); \ - } while(0) - -/** - * @brief Disable the PVD Extended Interrupt Rising & Falling Trigger. - * @retval None - */ -#define __HAL_PWR_PVD_EXTI_DISABLE_RISING_FALLING_EDGE() \ - do { \ - __HAL_PWR_PVD_EXTI_DISABLE_RISING_EDGE(); \ - __HAL_PWR_PVD_EXTI_DISABLE_FALLING_EDGE(); \ - } while(0) - -/** - * @brief Generate a Software interrupt on selected EXTI line. - * @retval None - */ -#define __HAL_PWR_PVD_EXTI_GENERATE_SWIT() SET_BIT(EXTI->SWIER1, PWR_EXTI_LINE_PVD) - -/** - * @brief Check whether or not the PVD EXTI interrupt flag is set. - * @retval EXTI PVD Line Status. - */ -#define __HAL_PWR_PVD_EXTI_GET_FLAG() (EXTI->PR1 & PWR_EXTI_LINE_PVD) - -/** - * @brief Clear the PVD EXTI interrupt flag. - * @retval None - */ -#define __HAL_PWR_PVD_EXTI_CLEAR_FLAG() WRITE_REG(EXTI->PR1, PWR_EXTI_LINE_PVD) - -/** - * @} - */ - - -/* Private macros --------------------------------------------------------*/ -/** @addtogroup PWR_Private_Macros PWR Private Macros - * @{ - */ - -#define IS_PWR_PVD_LEVEL(LEVEL) (((LEVEL) == PWR_PVDLEVEL_0) || ((LEVEL) == PWR_PVDLEVEL_1)|| \ - ((LEVEL) == PWR_PVDLEVEL_2) || ((LEVEL) == PWR_PVDLEVEL_3)|| \ - ((LEVEL) == PWR_PVDLEVEL_4) || ((LEVEL) == PWR_PVDLEVEL_5)|| \ - ((LEVEL) == PWR_PVDLEVEL_6) || ((LEVEL) == PWR_PVDLEVEL_7)) - -#define IS_PWR_PVD_MODE(MODE) (((MODE) == PWR_PVD_MODE_NORMAL) ||\ - ((MODE) == PWR_PVD_MODE_IT_RISING) ||\ - ((MODE) == PWR_PVD_MODE_IT_FALLING) ||\ - ((MODE) == PWR_PVD_MODE_IT_RISING_FALLING) ||\ - ((MODE) == PWR_PVD_MODE_EVENT_RISING) ||\ - ((MODE) == PWR_PVD_MODE_EVENT_FALLING) ||\ - ((MODE) == PWR_PVD_MODE_EVENT_RISING_FALLING)) - -#define IS_PWR_REGULATOR(REGULATOR) (((REGULATOR) == PWR_MAINREGULATOR_ON) || \ - ((REGULATOR) == PWR_LOWPOWERREGULATOR_ON)) - -#define IS_PWR_SLEEP_ENTRY(ENTRY) (((ENTRY) == PWR_SLEEPENTRY_WFI) || ((ENTRY) == PWR_SLEEPENTRY_WFE)) - -#define IS_PWR_STOP_ENTRY(ENTRY) (((ENTRY) == PWR_STOPENTRY_WFI) || ((ENTRY) == PWR_STOPENTRY_WFE) ) - -/** - * @} - */ - -/* Include PWR HAL Extended module */ -#include "stm32l4xx_hal_pwr_ex.h" - -/* Exported functions --------------------------------------------------------*/ - -/** @addtogroup PWR_Exported_Functions PWR Exported Functions - * @{ - */ - -/** @addtogroup PWR_Exported_Functions_Group1 Initialization and de-initialization functions - * @{ - */ - -/* Initialization and de-initialization functions *******************************/ -void HAL_PWR_DeInit(void); -void HAL_PWR_EnableBkUpAccess(void); -void HAL_PWR_DisableBkUpAccess(void); - -/** - * @} - */ - -/** @addtogroup PWR_Exported_Functions_Group2 Peripheral Control functions - * @{ - */ - -/* Peripheral Control functions ************************************************/ -HAL_StatusTypeDef HAL_PWR_ConfigPVD(PWR_PVDTypeDef *sConfigPVD); -void HAL_PWR_EnablePVD(void); -void HAL_PWR_DisablePVD(void); - - -/* WakeUp pins configuration functions ****************************************/ -void HAL_PWR_EnableWakeUpPin(uint32_t WakeUpPinPolarity); -void HAL_PWR_DisableWakeUpPin(uint32_t WakeUpPinx); - -/* Low Power modes configuration functions ************************************/ -void HAL_PWR_EnterSLEEPMode(uint32_t Regulator, uint8_t SLEEPEntry); -void HAL_PWR_EnterSTOPMode(uint32_t Regulator, uint8_t STOPEntry); -void HAL_PWR_EnterSTANDBYMode(void); - -void HAL_PWR_EnableSleepOnExit(void); -void HAL_PWR_DisableSleepOnExit(void); -void HAL_PWR_EnableSEVOnPend(void); -void HAL_PWR_DisableSEVOnPend(void); - -void HAL_PWR_PVDCallback(void); - - -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -#ifdef __cplusplus -} -#endif - - -#endif /* __STM32L4xx_HAL_PWR_H */ - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ |