diff options
Diffstat (limited to 'stmhal/hal/f7/inc/stm32f7xx_hal_pwr_ex.h')
| -rw-r--r-- | stmhal/hal/f7/inc/stm32f7xx_hal_pwr_ex.h | 280 |
1 files changed, 280 insertions, 0 deletions
diff --git a/stmhal/hal/f7/inc/stm32f7xx_hal_pwr_ex.h b/stmhal/hal/f7/inc/stm32f7xx_hal_pwr_ex.h new file mode 100644 index 000000000..3f4ab5777 --- /dev/null +++ b/stmhal/hal/f7/inc/stm32f7xx_hal_pwr_ex.h @@ -0,0 +1,280 @@ +/** + ****************************************************************************** + * @file stm32f7xx_hal_pwr_ex.h + * @author MCD Application Team + * @version V1.0.1 + * @date 25-June-2015 + * @brief Header file of PWR HAL Extension module. + ****************************************************************************** + * @attention + * + * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2> + * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32F7xx_HAL_PWR_EX_H +#define __STM32F7xx_HAL_PWR_EX_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f7xx_hal_def.h" + +/** @addtogroup STM32F7xx_HAL_Driver + * @{ + */ + +/** @addtogroup PWREx + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/* Exported constants --------------------------------------------------------*/ +/** @defgroup PWREx_Exported_Constants PWREx Exported Constants + * @{ + */ +/** @defgroup PWREx_WakeUp_Pins PWREx Wake Up Pins + * @{ + */ +#define PWR_WAKEUP_PIN1 PWR_CSR2_EWUP1 +#define PWR_WAKEUP_PIN2 PWR_CSR2_EWUP2 +#define PWR_WAKEUP_PIN3 PWR_CSR2_EWUP3 +#define PWR_WAKEUP_PIN4 PWR_CSR2_EWUP4 +#define PWR_WAKEUP_PIN5 PWR_CSR2_EWUP5 +#define PWR_WAKEUP_PIN6 PWR_CSR2_EWUP6 +#define PWR_WAKEUP_PIN1_HIGH PWR_CSR2_EWUP1 +#define PWR_WAKEUP_PIN2_HIGH PWR_CSR2_EWUP2 +#define PWR_WAKEUP_PIN3_HIGH PWR_CSR2_EWUP3 +#define PWR_WAKEUP_PIN4_HIGH PWR_CSR2_EWUP4 +#define PWR_WAKEUP_PIN5_HIGH PWR_CSR2_EWUP5 +#define PWR_WAKEUP_PIN6_HIGH PWR_CSR2_EWUP6 +#define PWR_WAKEUP_PIN1_LOW (uint32_t)((PWR_CR2_WUPP1<<6) | PWR_CSR2_EWUP1) +#define PWR_WAKEUP_PIN2_LOW (uint32_t)((PWR_CR2_WUPP2<<6) | PWR_CSR2_EWUP2) +#define PWR_WAKEUP_PIN3_LOW (uint32_t)((PWR_CR2_WUPP3<<6) | PWR_CSR2_EWUP3) +#define PWR_WAKEUP_PIN4_LOW (uint32_t)((PWR_CR2_WUPP4<<6) | PWR_CSR2_EWUP4) +#define PWR_WAKEUP_PIN5_LOW (uint32_t)((PWR_CR2_WUPP5<<6) | PWR_CSR2_EWUP5) +#define PWR_WAKEUP_PIN6_LOW (uint32_t)((PWR_CR2_WUPP6<<6) | PWR_CSR2_EWUP6) + +/** + * @} + */ + +/** @defgroup PWREx_Regulator_state_in_UnderDrive_mode PWREx Regulator state in UnderDrive mode + * @{ + */ +#define PWR_MAINREGULATOR_UNDERDRIVE_ON PWR_CR1_MRUDS +#define PWR_LOWPOWERREGULATOR_UNDERDRIVE_ON ((uint32_t)(PWR_CR1_LPDS | PWR_CR1_LPUDS)) +/** + * @} + */ + +/** @defgroup PWREx_Over_Under_Drive_Flag PWREx Over Under Drive Flag + * @{ + */ +#define PWR_FLAG_ODRDY PWR_CSR1_ODRDY +#define PWR_FLAG_ODSWRDY PWR_CSR1_ODSWRDY +#define PWR_FLAG_UDRDY PWR_CSR1_UDSWRDY +/** + * @} + */ + +/** @defgroup PWREx_Wakeup_Pins_Flag PWREx Wake Up Pin Flags + * @{ + */ +#define PWR_WAKEUP_PIN_FLAG1 PWR_CSR2_WUPF1 +#define PWR_WAKEUP_PIN_FLAG2 PWR_CSR2_WUPF2 +#define PWR_WAKEUP_PIN_FLAG3 PWR_CSR2_WUPF3 +#define PWR_WAKEUP_PIN_FLAG4 PWR_CSR2_WUPF4 +#define PWR_WAKEUP_PIN_FLAG5 PWR_CSR2_WUPF5 +#define PWR_WAKEUP_PIN_FLAG6 PWR_CSR2_WUPF6 +/** + * @} + */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ +/** @defgroup PWREx_Exported_Macro PWREx Exported Macro + * @{ + */ +/** @brief Macros to enable or disable the Over drive mode. + */ +#define __HAL_PWR_OVERDRIVE_ENABLE() (PWR->CR1 |= (uint32_t)PWR_CR1_ODEN) +#define __HAL_PWR_OVERDRIVE_DISABLE() (PWR->CR1 &= (uint32_t)(~PWR_CR1_ODEN)) + +/** @brief Macros to enable or disable the Over drive switching. + */ +#define __HAL_PWR_OVERDRIVESWITCHING_ENABLE() (PWR->CR1 |= (uint32_t)PWR_CR1_ODSWEN) +#define __HAL_PWR_OVERDRIVESWITCHING_DISABLE() (PWR->CR1 &= (uint32_t)(~PWR_CR1_ODSWEN)) + +/** @brief Macros to enable or disable the Under drive mode. + * @note This mode is enabled only with STOP low power mode. + * In this mode, the 1.2V domain is preserved in reduced leakage mode. This + * mode is only available when the main regulator or the low power regulator + * is in low voltage mode. + * @note If the Under-drive mode was enabled, it is automatically disabled after + * exiting Stop mode. + * When the voltage regulator operates in Under-drive mode, an additional + * startup delay is induced when waking up from Stop mode. + */ +#define __HAL_PWR_UNDERDRIVE_ENABLE() (PWR->CR1 |= (uint32_t)PWR_CR1_UDEN) +#define __HAL_PWR_UNDERDRIVE_DISABLE() (PWR->CR1 &= (uint32_t)(~PWR_CR1_UDEN)) + +/** @brief Check PWR flag is set or not. + * @param __FLAG__: specifies the flag to check. + * This parameter can be one of the following values: + * @arg PWR_FLAG_ODRDY: This flag indicates that the Over-drive mode + * is ready + * @arg PWR_FLAG_ODSWRDY: This flag indicates that the Over-drive mode + * switching is ready + * @arg PWR_FLAG_UDRDY: This flag indicates that the Under-drive mode + * is enabled in Stop mode + * @retval The new state of __FLAG__ (TRUE or FALSE). + */ +#define __HAL_PWR_GET_ODRUDR_FLAG(__FLAG__) ((PWR->CSR1 & (__FLAG__)) == (__FLAG__)) + +/** @brief Clear the Under-Drive Ready flag. + */ +#define __HAL_PWR_CLEAR_ODRUDR_FLAG() (PWR->CSR1 |= PWR_FLAG_UDRDY) + +/** @brief Check Wake Up flag is set or not. + * @param __WUFLAG__: specifies the Wake Up flag to check. + * This parameter can be one of the following values: + * @arg PWR_WAKEUP_PIN_FLAG1: Wakeup Pin Flag for PA0 + * @arg PWR_WAKEUP_PIN_FLAG2: Wakeup Pin Flag for PA2 + * @arg PWR_WAKEUP_PIN_FLAG3: Wakeup Pin Flag for PC1 + * @arg PWR_WAKEUP_PIN_FLAG4: Wakeup Pin Flag for PC13 + * @arg PWR_WAKEUP_PIN_FLAG5: Wakeup Pin Flag for PI8 + * @arg PWR_WAKEUP_PIN_FLAG6: Wakeup Pin Flag for PI11 + */ +#define __HAL_PWR_GET_WAKEUP_FLAG(__WUFLAG__) (PWR->CSR2 & (__WUFLAG__)) + +/** @brief Clear the WakeUp pins flags. + * @param __WUFLAG__: specifies the Wake Up pin flag to clear. + * This parameter can be one of the following values: + * @arg PWR_WAKEUP_PIN_FLAG1: Wakeup Pin Flag for PA0 + * @arg PWR_WAKEUP_PIN_FLAG2: Wakeup Pin Flag for PA2 + * @arg PWR_WAKEUP_PIN_FLAG3: Wakeup Pin Flag for PC1 + * @arg PWR_WAKEUP_PIN_FLAG4: Wakeup Pin Flag for PC13 + * @arg PWR_WAKEUP_PIN_FLAG5: Wakeup Pin Flag for PI8 + * @arg PWR_WAKEUP_PIN_FLAG6: Wakeup Pin Flag for PI11 + */ +#define __HAL_PWR_CLEAR_WAKEUP_FLAG(__WUFLAG__) (PWR->CR2 |= (__WUFLAG__)) +/** + * @} + */ +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup PWREx_Exported_Functions PWREx Exported Functions + * @{ + */ + +/** @addtogroup PWREx_Exported_Functions_Group1 + * @{ + */ +uint32_t HAL_PWREx_GetVoltageRange(void); +HAL_StatusTypeDef HAL_PWREx_ControlVoltageScaling(uint32_t VoltageScaling); + +void HAL_PWREx_EnableFlashPowerDown(void); +void HAL_PWREx_DisableFlashPowerDown(void); +HAL_StatusTypeDef HAL_PWREx_EnableBkUpReg(void); +HAL_StatusTypeDef HAL_PWREx_DisableBkUpReg(void); + +void HAL_PWREx_EnableMainRegulatorLowVoltage(void); +void HAL_PWREx_DisableMainRegulatorLowVoltage(void); +void HAL_PWREx_EnableLowRegulatorLowVoltage(void); +void HAL_PWREx_DisableLowRegulatorLowVoltage(void); + +HAL_StatusTypeDef HAL_PWREx_EnableOverDrive(void); +HAL_StatusTypeDef HAL_PWREx_DisableOverDrive(void); +HAL_StatusTypeDef HAL_PWREx_EnterUnderDriveSTOPMode(uint32_t Regulator, uint8_t STOPEntry); + +/** + * @} + */ + +/** + * @} + */ +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private constants ---------------------------------------------------------*/ +/* Private macros ------------------------------------------------------------*/ +/** @defgroup PWREx_Private_Macros PWREx Private Macros + * @{ + */ + +/** @defgroup PWREx_IS_PWR_Definitions PWREx Private macros to check input parameters + * @{ + */ +#define IS_PWR_REGULATOR_UNDERDRIVE(REGULATOR) (((REGULATOR) == PWR_MAINREGULATOR_UNDERDRIVE_ON) || \ + ((REGULATOR) == PWR_LOWPOWERREGULATOR_UNDERDRIVE_ON)) +#define IS_PWR_WAKEUP_PIN(__PIN__) (((__PIN__) == PWR_WAKEUP_PIN1) || \ + ((__PIN__) == PWR_WAKEUP_PIN2) || \ + ((__PIN__) == PWR_WAKEUP_PIN3) || \ + ((__PIN__) == PWR_WAKEUP_PIN4) || \ + ((__PIN__) == PWR_WAKEUP_PIN5) || \ + ((__PIN__) == PWR_WAKEUP_PIN6) || \ + ((__PIN__) == PWR_WAKEUP_PIN1_HIGH) || \ + ((__PIN__) == PWR_WAKEUP_PIN2_HIGH) || \ + ((__PIN__) == PWR_WAKEUP_PIN3_HIGH) || \ + ((__PIN__) == PWR_WAKEUP_PIN4_HIGH) || \ + ((__PIN__) == PWR_WAKEUP_PIN5_HIGH) || \ + ((__PIN__) == PWR_WAKEUP_PIN6_HIGH) || \ + ((__PIN__) == PWR_WAKEUP_PIN1_LOW) || \ + ((__PIN__) == PWR_WAKEUP_PIN2_LOW) || \ + ((__PIN__) == PWR_WAKEUP_PIN3_LOW) || \ + ((__PIN__) == PWR_WAKEUP_PIN4_LOW) || \ + ((__PIN__) == PWR_WAKEUP_PIN5_LOW) || \ + ((__PIN__) == PWR_WAKEUP_PIN6_LOW)) +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + + +#endif /* __STM32F7xx_HAL_PWR_EX_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ |