diff options
Diffstat (limited to 'stmhal/hal/f7/inc/stm32f7xx_hal_adc_ex.h')
| -rw-r--r-- | stmhal/hal/f7/inc/stm32f7xx_hal_adc_ex.h | 376 |
1 files changed, 0 insertions, 376 deletions
diff --git a/stmhal/hal/f7/inc/stm32f7xx_hal_adc_ex.h b/stmhal/hal/f7/inc/stm32f7xx_hal_adc_ex.h deleted file mode 100644 index 9ffe390e7..000000000 --- a/stmhal/hal/f7/inc/stm32f7xx_hal_adc_ex.h +++ /dev/null @@ -1,376 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f7xx_hal_adc.h - * @author MCD Application Team - * @version V1.1.2 - * @date 23-September-2016 - * @brief Header file of ADC HAL module. - ****************************************************************************** - * @attention - * - * <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2> - * - * Redistribution and use in source and binary forms, with or without modification, - * are permitted provided that the following conditions are met: - * 1. Redistributions of source code must retain the above copyright notice, - * this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following disclaimer in the documentation - * and/or other materials provided with the distribution. - * 3. Neither the name of STMicroelectronics nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER - * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, - * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F7xx_ADC_EX_H -#define __STM32F7xx_ADC_EX_H - -#ifdef __cplusplus - extern "C" { -#endif - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f7xx_hal_def.h" - -/** @addtogroup STM32F7xx_HAL_Driver - * @{ - */ - -/** @addtogroup ADCEx - * @{ - */ - -/* Exported types ------------------------------------------------------------*/ -/** @defgroup ADCEx_Exported_Types ADC Exported Types - * @{ - */ - -/** - * @brief ADC Configuration injected Channel structure definition - * @note Parameters of this structure are shared within 2 scopes: - * - Scope channel: InjectedChannel, InjectedRank, InjectedSamplingTime, InjectedOffset - * - Scope injected group (affects all channels of injected group): InjectedNbrOfConversion, InjectedDiscontinuousConvMode, - * AutoInjectedConv, ExternalTrigInjecConvEdge, ExternalTrigInjecConv. - * @note The setting of these parameters with function HAL_ADCEx_InjectedConfigChannel() is conditioned to ADC state. - * ADC state can be either: - * - For all parameters: ADC disabled - * - For all except parameters 'InjectedDiscontinuousConvMode' and 'AutoInjectedConv': ADC enabled without conversion on going on injected group. - * - For parameters 'ExternalTrigInjecConv' and 'ExternalTrigInjecConvEdge': ADC enabled, even with conversion on going on injected group. - */ -typedef struct -{ - uint32_t InjectedChannel; /*!< Selection of ADC channel to configure - This parameter can be a value of @ref ADC_channels - Note: Depending on devices, some channels may not be available on package pins. Refer to device datasheet for channels availability. */ - uint32_t InjectedRank; /*!< Rank in the injected group sequencer - This parameter must be a value of @ref ADCEx_injected_rank - Note: In case of need to disable a channel or change order of conversion sequencer, rank containing a previous channel setting can be overwritten by the new channel setting (or parameter number of conversions can be adjusted) */ - uint32_t InjectedSamplingTime; /*!< Sampling time value to be set for the selected channel. - Unit: ADC clock cycles - Conversion time is the addition of sampling time and processing time (12 ADC clock cycles at ADC resolution 12 bits, 11 cycles at 10 bits, 9 cycles at 8 bits, 7 cycles at 6 bits). - This parameter can be a value of @ref ADC_sampling_times - Caution: This parameter updates the parameter property of the channel, that can be used into regular and/or injected groups. - If this same channel has been previously configured in the other group (regular/injected), it will be updated to last setting. - Note: In case of usage of internal measurement channels (VrefInt/Vbat/TempSensor), - sampling time constraints must be respected (sampling time can be adjusted in function of ADC clock frequency and sampling time setting) - Refer to device datasheet for timings values, parameters TS_vrefint, TS_temp (values rough order: 4us min). */ - uint32_t InjectedOffset; /*!< Defines the offset to be subtracted from the raw converted data (for channels set on injected group only). - Offset value must be a positive number. - Depending of ADC resolution selected (12, 10, 8 or 6 bits), - this parameter must be a number between Min_Data = 0x000 and Max_Data = 0xFFF, 0x3FF, 0xFF or 0x3F respectively. */ - uint32_t InjectedNbrOfConversion; /*!< Specifies the number of ranks that will be converted within the injected group sequencer. - To use the injected group sequencer and convert several ranks, parameter 'ScanConvMode' must be enabled. - This parameter must be a number between Min_Data = 1 and Max_Data = 4. - Caution: this setting impacts the entire injected group. Therefore, call of HAL_ADCEx_InjectedConfigChannel() to - configure a channel on injected group can impact the configuration of other channels previously set. */ - uint32_t InjectedDiscontinuousConvMode; /*!< Specifies whether the conversions sequence of injected group is performed in Complete-sequence/Discontinuous-sequence (main sequence subdivided in successive parts). - Discontinuous mode is used only if sequencer is enabled (parameter 'ScanConvMode'). If sequencer is disabled, this parameter is discarded. - Discontinuous mode can be enabled only if continuous mode is disabled. If continuous mode is enabled, this parameter setting is discarded. - This parameter can be set to ENABLE or DISABLE. - Note: For injected group, number of discontinuous ranks increment is fixed to one-by-one. - Caution: this setting impacts the entire injected group. Therefore, call of HAL_ADCEx_InjectedConfigChannel() to - configure a channel on injected group can impact the configuration of other channels previously set. */ - uint32_t AutoInjectedConv; /*!< Enables or disables the selected ADC automatic injected group conversion after regular one - This parameter can be set to ENABLE or DISABLE. - Note: To use Automatic injected conversion, discontinuous mode must be disabled ('DiscontinuousConvMode' and 'InjectedDiscontinuousConvMode' set to DISABLE) - Note: To use Automatic injected conversion, injected group external triggers must be disabled ('ExternalTrigInjecConv' set to ADC_SOFTWARE_START) - Note: In case of DMA used with regular group: if DMA configured in normal mode (single shot) JAUTO will be stopped upon DMA transfer complete. - To maintain JAUTO always enabled, DMA must be configured in circular mode. - Caution: this setting impacts the entire injected group. Therefore, call of HAL_ADCEx_InjectedConfigChannel() to - configure a channel on injected group can impact the configuration of other channels previously set. */ - uint32_t ExternalTrigInjecConv; /*!< Selects the external event used to trigger the conversion start of injected group. - If set to ADC_INJECTED_SOFTWARE_START, external triggers are disabled. - If set to external trigger source, triggering is on event rising edge. - This parameter can be a value of @ref ADCEx_External_trigger_Source_Injected - Note: This parameter must be modified when ADC is disabled (before ADC start conversion or after ADC stop conversion). - If ADC is enabled, this parameter setting is bypassed without error reporting (as it can be the expected behaviour in case of another parameter update on the fly) - Caution: this setting impacts the entire injected group. Therefore, call of HAL_ADCEx_InjectedConfigChannel() to - configure a channel on injected group can impact the configuration of other channels previously set. */ - uint32_t ExternalTrigInjecConvEdge; /*!< Selects the external trigger edge of injected group. - This parameter can be a value of @ref ADCEx_External_trigger_edge_Injected. - If trigger is set to ADC_INJECTED_SOFTWARE_START, this parameter is discarded. - Caution: this setting impacts the entire injected group. Therefore, call of HAL_ADCEx_InjectedConfigChannel() to - configure a channel on injected group can impact the configuration of other channels previously set. */ -}ADC_InjectionConfTypeDef; -/** - * @} - */ - -/** - * @brief ADC Configuration multi-mode structure definition - */ -typedef struct -{ - uint32_t Mode; /*!< Configures the ADC to operate in independent or multi mode. - This parameter can be a value of @ref ADCEx_Common_mode */ - uint32_t DMAAccessMode; /*!< Configures the Direct memory access mode for multi ADC mode. - This parameter can be a value of @ref ADCEx_Direct_memory_access_mode_for_multi_mode */ - uint32_t TwoSamplingDelay; /*!< Configures the Delay between 2 sampling phases. - This parameter can be a value of @ref ADC_delay_between_2_sampling_phases */ -}ADC_MultiModeTypeDef; - -/** - * @} - */ - -/* Exported constants --------------------------------------------------------*/ -/** @defgroup ADCEx_Exported_Constants ADC Exported Constants - * @{ - */ - -/** @defgroup ADCEx_Common_mode ADC Common Mode - * @{ - */ -#define ADC_MODE_INDEPENDENT ((uint32_t)0x00000000U) -#define ADC_DUALMODE_REGSIMULT_INJECSIMULT ((uint32_t)ADC_CCR_MULTI_0) -#define ADC_DUALMODE_REGSIMULT_ALTERTRIG ((uint32_t)ADC_CCR_MULTI_1) -#define ADC_DUALMODE_INJECSIMULT ((uint32_t)(ADC_CCR_MULTI_2 | ADC_CCR_MULTI_0)) -#define ADC_DUALMODE_REGSIMULT ((uint32_t)(ADC_CCR_MULTI_2 | ADC_CCR_MULTI_1)) -#define ADC_DUALMODE_INTERL ((uint32_t)(ADC_CCR_MULTI_2 | ADC_CCR_MULTI_1 | ADC_CCR_MULTI_0)) -#define ADC_DUALMODE_ALTERTRIG ((uint32_t)(ADC_CCR_MULTI_3 | ADC_CCR_MULTI_0)) -#define ADC_TRIPLEMODE_REGSIMULT_INJECSIMULT ((uint32_t)(ADC_CCR_MULTI_4 | ADC_CCR_MULTI_0)) -#define ADC_TRIPLEMODE_REGSIMULT_AlterTrig ((uint32_t)(ADC_CCR_MULTI_4 | ADC_CCR_MULTI_1)) -#define ADC_TRIPLEMODE_INJECSIMULT ((uint32_t)(ADC_CCR_MULTI_4 | ADC_CCR_MULTI_2 | ADC_CCR_MULTI_0)) -#define ADC_TRIPLEMODE_REGSIMULT ((uint32_t)(ADC_CCR_MULTI_4 | ADC_CCR_MULTI_2 | ADC_CCR_MULTI_1)) -#define ADC_TRIPLEMODE_INTERL ((uint32_t)(ADC_CCR_MULTI_4 | ADC_CCR_MULTI_2 | ADC_CCR_MULTI_1 | ADC_CCR_MULTI_0)) -#define ADC_TRIPLEMODE_ALTERTRIG ((uint32_t)(ADC_CCR_MULTI_4 | ADC_CCR_MULTI_3 | ADC_CCR_MULTI_0)) -/** - * @} - */ - -/** @defgroup ADCEx_Direct_memory_access_mode_for_multi_mode ADC Direct Memory Access Mode For Multi Mode - * @{ - */ -#define ADC_DMAACCESSMODE_DISABLED ((uint32_t)0x00000000U) /*!< DMA mode disabled */ -#define ADC_DMAACCESSMODE_1 ((uint32_t)ADC_CCR_DMA_0) /*!< DMA mode 1 enabled (2 / 3 half-words one by one - 1 then 2 then 3)*/ -#define ADC_DMAACCESSMODE_2 ((uint32_t)ADC_CCR_DMA_1) /*!< DMA mode 2 enabled (2 / 3 half-words by pairs - 2&1 then 1&3 then 3&2)*/ -#define ADC_DMAACCESSMODE_3 ((uint32_t)ADC_CCR_DMA) /*!< DMA mode 3 enabled (2 / 3 bytes by pairs - 2&1 then 1&3 then 3&2) */ -/** - * @} - */ - -/** @defgroup ADCEx_External_trigger_edge_Injected ADC External Trigger Edge Injected - * @{ - */ -#define ADC_EXTERNALTRIGINJECCONVEDGE_NONE ((uint32_t)0x00000000U) -#define ADC_EXTERNALTRIGINJECCONVEDGE_RISING ((uint32_t)ADC_CR2_JEXTEN_0) -#define ADC_EXTERNALTRIGINJECCONVEDGE_FALLING ((uint32_t)ADC_CR2_JEXTEN_1) -#define ADC_EXTERNALTRIGINJECCONVEDGE_RISINGFALLING ((uint32_t)ADC_CR2_JEXTEN) -/** - * @} - */ - -/** @defgroup ADCEx_External_trigger_Source_Injected ADC External Trigger Source Injected - * @{ - */ -#define ADC_EXTERNALTRIGINJECCONV_T1_TRGO ((uint32_t)0x00000000U) -#define ADC_EXTERNALTRIGINJECCONV_T1_CC4 ((uint32_t)ADC_CR2_JEXTSEL_0) -#define ADC_EXTERNALTRIGINJECCONV_T2_TRGO ((uint32_t)ADC_CR2_JEXTSEL_1) -#define ADC_EXTERNALTRIGINJECCONV_T2_CC1 ((uint32_t)(ADC_CR2_JEXTSEL_1 | ADC_CR2_JEXTSEL_0)) -#define ADC_EXTERNALTRIGINJECCONV_T3_CC4 ((uint32_t)ADC_CR2_JEXTSEL_2) -#define ADC_EXTERNALTRIGINJECCONV_T4_TRGO ((uint32_t)(ADC_CR2_JEXTSEL_2 | ADC_CR2_JEXTSEL_0)) - -#define ADC_EXTERNALTRIGINJECCONV_T8_CC4 ((uint32_t)(ADC_CR2_JEXTSEL_2 | ADC_CR2_JEXTSEL_1 | ADC_CR2_JEXTSEL_0)) -#define ADC_EXTERNALTRIGINJECCONV_T1_TRGO2 ((uint32_t)ADC_CR2_JEXTSEL_3) -#define ADC_EXTERNALTRIGINJECCONV_T8_TRGO ((uint32_t)(ADC_CR2_JEXTSEL_3 | ADC_CR2_JEXTSEL_0)) -#define ADC_EXTERNALTRIGINJECCONV_T8_TRGO2 ((uint32_t)(ADC_CR2_JEXTSEL_3 | ADC_CR2_JEXTSEL_1)) -#define ADC_EXTERNALTRIGINJECCONV_T3_CC3 ((uint32_t)(ADC_CR2_JEXTSEL_3 | ADC_CR2_JEXTSEL_1 | ADC_CR2_JEXTSEL_0)) -#define ADC_EXTERNALTRIGINJECCONV_T5_TRGO ((uint32_t)(ADC_CR2_JEXTSEL_3 | ADC_CR2_JEXTSEL_2)) -#define ADC_EXTERNALTRIGINJECCONV_T3_CC1 ((uint32_t)(ADC_CR2_JEXTSEL_3 | ADC_CR2_JEXTSEL_2 | ADC_CR2_JEXTSEL_0)) -#define ADC_EXTERNALTRIGINJECCONV_T6_TRGO ((uint32_t)(ADC_CR2_JEXTSEL_3 | ADC_CR2_JEXTSEL_2 | ADC_CR2_JEXTSEL_1)) -#define ADC_INJECTED_SOFTWARE_START ((uint32_t)ADC_CR2_JEXTSEL + 1) -/** - * @} - */ - -/** @defgroup ADCEx_injected_rank ADC Injected Rank - * @{ - */ -#define ADC_INJECTED_RANK_1 ((uint32_t)0x00000001U) -#define ADC_INJECTED_RANK_2 ((uint32_t)0x00000002U) -#define ADC_INJECTED_RANK_3 ((uint32_t)0x00000003U) -#define ADC_INJECTED_RANK_4 ((uint32_t)0x00000004U) -/** - * @} - */ - -/** @defgroup ADCEx_channels ADC Specific Channels - * @{ - */ -#define ADC_CHANNEL_TEMPSENSOR ((uint32_t)ADC_CHANNEL_18 | 0x10000000U) -/** - * @} - */ - -/** - * @} - */ - -/* Exported macro ------------------------------------------------------------*/ -/** @defgroup ADC_Exported_Macros ADC Exported Macros - * @{ - */ -/** - * @} - */ - -/* Exported functions --------------------------------------------------------*/ -/** @addtogroup ADCEx_Exported_Functions - * @{ - */ - -/** @addtogroup ADCEx_Exported_Functions_Group1 - * @{ - */ - -/* I/O operation functions ******************************************************/ -HAL_StatusTypeDef HAL_ADCEx_InjectedStart(ADC_HandleTypeDef* hadc); -HAL_StatusTypeDef HAL_ADCEx_InjectedStop(ADC_HandleTypeDef* hadc); -HAL_StatusTypeDef HAL_ADCEx_InjectedPollForConversion(ADC_HandleTypeDef* hadc, uint32_t Timeout); -HAL_StatusTypeDef HAL_ADCEx_InjectedStart_IT(ADC_HandleTypeDef* hadc); -HAL_StatusTypeDef HAL_ADCEx_InjectedStop_IT(ADC_HandleTypeDef* hadc); -uint32_t HAL_ADCEx_InjectedGetValue(ADC_HandleTypeDef* hadc, uint32_t InjectedRank); -HAL_StatusTypeDef HAL_ADCEx_MultiModeStart_DMA(ADC_HandleTypeDef* hadc, uint32_t* pData, uint32_t Length); -HAL_StatusTypeDef HAL_ADCEx_MultiModeStop_DMA(ADC_HandleTypeDef* hadc); -uint32_t HAL_ADCEx_MultiModeGetValue(ADC_HandleTypeDef* hadc); -void HAL_ADCEx_InjectedConvCpltCallback(ADC_HandleTypeDef* hadc); - -/* Peripheral Control functions *************************************************/ -HAL_StatusTypeDef HAL_ADCEx_InjectedConfigChannel(ADC_HandleTypeDef* hadc,ADC_InjectionConfTypeDef* sConfigInjected); -HAL_StatusTypeDef HAL_ADCEx_MultiModeConfigChannel(ADC_HandleTypeDef* hadc, ADC_MultiModeTypeDef* multimode); - -/** - * @} - */ - -/** - * @} - */ -/* Private types -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -/* Private constants ---------------------------------------------------------*/ -/** @defgroup ADCEx_Private_Constants ADC Private Constants - * @{ - */ - -/** - * @} - */ - -/* Private macros ------------------------------------------------------------*/ -/** @defgroup ADCEx_Private_Macros ADC Private Macros - * @{ - */ -#define IS_ADC_CHANNEL(CHANNEL) (((CHANNEL) <= ADC_CHANNEL_18) || \ - ((CHANNEL) == ADC_CHANNEL_TEMPSENSOR)) - -#define IS_ADC_MODE(__MODE__) (((__MODE__) == ADC_MODE_INDEPENDENT) || \ - ((__MODE__) == ADC_DUALMODE_REGSIMULT_INJECSIMULT) || \ - ((__MODE__) == ADC_DUALMODE_REGSIMULT_ALTERTRIG) || \ - ((__MODE__) == ADC_DUALMODE_INJECSIMULT) || \ - ((__MODE__) == ADC_DUALMODE_REGSIMULT) || \ - ((__MODE__) == ADC_DUALMODE_INTERL) || \ - ((__MODE__) == ADC_DUALMODE_ALTERTRIG) || \ - ((__MODE__) == ADC_TRIPLEMODE_REGSIMULT_INJECSIMULT) || \ - ((__MODE__) == ADC_TRIPLEMODE_REGSIMULT_AlterTrig) || \ - ((__MODE__) == ADC_TRIPLEMODE_INJECSIMULT) || \ - ((__MODE__) == ADC_TRIPLEMODE_REGSIMULT) || \ - ((__MODE__) == ADC_TRIPLEMODE_INTERL) || \ - ((__MODE__) == ADC_TRIPLEMODE_ALTERTRIG)) -#define IS_ADC_DMA_ACCESS_MODE(__MODE__) (((__MODE__) == ADC_DMAACCESSMODE_DISABLED) || \ - ((__MODE__) == ADC_DMAACCESSMODE_1) || \ - ((__MODE__) == ADC_DMAACCESSMODE_2) || \ - ((__MODE__) == ADC_DMAACCESSMODE_3)) -#define IS_ADC_EXT_INJEC_TRIG_EDGE(__EDGE__) (((__EDGE__) == ADC_EXTERNALTRIGINJECCONVEDGE_NONE) || \ - ((__EDGE__) == ADC_EXTERNALTRIGINJECCONVEDGE_RISING) || \ - ((__EDGE__) == ADC_EXTERNALTRIGINJECCONVEDGE_FALLING) || \ - ((__EDGE__) == ADC_EXTERNALTRIGINJECCONVEDGE_RISINGFALLING)) -#define IS_ADC_EXT_INJEC_TRIG(__INJTRIG__) (((__INJTRIG__) == ADC_EXTERNALTRIGINJECCONV_T1_TRGO) || \ - ((__INJTRIG__) == ADC_EXTERNALTRIGINJECCONV_T1_CC4) || \ - ((__INJTRIG__) == ADC_EXTERNALTRIGINJECCONV_T2_TRGO) || \ - ((__INJTRIG__) == ADC_EXTERNALTRIGINJECCONV_T2_CC1) || \ - ((__INJTRIG__) == ADC_EXTERNALTRIGINJECCONV_T3_CC4) || \ - ((__INJTRIG__) == ADC_EXTERNALTRIGINJECCONV_T4_TRGO) || \ - ((__INJTRIG__) == ADC_EXTERNALTRIGINJECCONV_T8_CC4) || \ - ((__INJTRIG__) == ADC_EXTERNALTRIGINJECCONV_T1_TRGO2) || \ - ((__INJTRIG__) == ADC_EXTERNALTRIGINJECCONV_T8_TRGO) || \ - ((__INJTRIG__) == ADC_EXTERNALTRIGINJECCONV_T8_TRGO2) || \ - ((__INJTRIG__) == ADC_EXTERNALTRIGINJECCONV_T3_CC3) || \ - ((__INJTRIG__) == ADC_EXTERNALTRIGINJECCONV_T5_TRGO) || \ - ((__INJTRIG__) == ADC_EXTERNALTRIGINJECCONV_T3_CC1) || \ - ((__INJTRIG__) == ADC_EXTERNALTRIGINJECCONV_T6_TRGO) || \ - ((__INJTRIG__) == ADC_INJECTED_SOFTWARE_START)) -#define IS_ADC_INJECTED_LENGTH(__LENGTH__) (((__LENGTH__) >= ((uint32_t)1)) && ((__LENGTH__) <= ((uint32_t)4))) -#define IS_ADC_INJECTED_RANK(__RANK__) (((__RANK__) >= ((uint32_t)1)) && ((__RANK__) <= ((uint32_t)4))) - -/** - * @brief Set the selected injected Channel rank. - * @param _CHANNELNB_: Channel number. - * @param _RANKNB_: Rank number. - * @param _JSQR_JL_: Sequence length. - * @retval None - */ -#define ADC_JSQR(_CHANNELNB_, _RANKNB_,_JSQR_JL_) (((uint32_t)((uint16_t)(_CHANNELNB_))) << (5 * (uint8_t)(((_RANKNB_) + 3) - (_JSQR_JL_)))) -/** - * @} - */ - -/* Private functions ---------------------------------------------------------*/ -/** @defgroup ADCEx_Private_Functions ADC Private Functions - * @{ - */ - -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -#ifdef __cplusplus -} -#endif - -#endif /*__STM32F7xx_ADC_EX_H */ - - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ |