diff options
Diffstat (limited to 'stmhal/boards/STM32F429DISC/mpconfigboard.h')
| -rw-r--r-- | stmhal/boards/STM32F429DISC/mpconfigboard.h | 50 |
1 files changed, 50 insertions, 0 deletions
diff --git a/stmhal/boards/STM32F429DISC/mpconfigboard.h b/stmhal/boards/STM32F429DISC/mpconfigboard.h new file mode 100644 index 000000000..cbf567403 --- /dev/null +++ b/stmhal/boards/STM32F429DISC/mpconfigboard.h @@ -0,0 +1,50 @@ +#define MICROPY_HW_BOARD_NAME "F429I-DISCO" +#define MICROPY_HW_MCU_NAME "STM32F429" + +#define MICROPY_HW_HAS_SWITCH (1) +#define MICROPY_HW_HAS_SDCARD (0) +#define MICROPY_HW_HAS_MMA7660 (0) +#define MICROPY_HW_HAS_LIS3DSH (0) +#define MICROPY_HW_HAS_LCD (0) +#define MICROPY_HW_ENABLE_RNG (1) +#define MICROPY_HW_ENABLE_RTC (1) +#define MICROPY_HW_ENABLE_TIMER (1) +#define MICROPY_HW_ENABLE_SERVO (0) +#define MICROPY_HW_ENABLE_DAC (0) +#define MICROPY_HW_ENABLE_SPI1 (0) +#define MICROPY_HW_ENABLE_SPI2 (0) +#define MICROPY_HW_ENABLE_SPI3 (0) +#define MICROPY_HW_ENABLE_CAN (1) + +// HSE is 8MHz +#define MICROPY_HW_CLK_PLLM (8) +#define MICROPY_HW_CLK_PLLN (336) +#define MICROPY_HW_CLK_PLLP (RCC_PLLP_DIV2) +#define MICROPY_HW_CLK_PLLQ (7) + +// UART config +#define MICROPY_HW_UART1_PORT (GPIOA) +#define MICROPY_HW_UART1_PINS (GPIO_PIN_9 | GPIO_PIN_10) +#define MICROPY_HW_UART2_PORT (GPIOD) +#define MICROPY_HW_UART2_PINS (GPIO_PIN_8 | GPIO_PIN_9) + +// I2C busses +#define MICROPY_HW_I2C1_SCL (pin_A8) +#define MICROPY_HW_I2C1_SDA (pin_C9) + +// USRSW is pulled low. Pressing the button makes the input go high. +#define MICROPY_HW_USRSW_PIN (pin_A0) +#define MICROPY_HW_USRSW_PULL (GPIO_NOPULL) +#define MICROPY_HW_USRSW_EXTI_MODE (GPIO_MODE_IT_RISING) +#define MICROPY_HW_USRSW_PRESSED (1) + +// LEDs +#define MICROPY_HW_LED1 (pin_G14) // red +#define MICROPY_HW_LED2 (pin_G13) // green +#define MICROPY_HW_LED_OTYPE (GPIO_MODE_OUTPUT_PP) +#define MICROPY_HW_LED_ON(pin) (pin->gpio->BSRRL = pin->pin_mask) +#define MICROPY_HW_LED_OFF(pin) (pin->gpio->BSRRH = pin->pin_mask) + +// USB config +#define MICROPY_HW_USB_VBUS_DETECT_PIN (pin_B13) +#define MICROPY_HW_USB_OTG_ID_PIN (pin_B12) |