aboutsummaryrefslogtreecommitdiff
path: root/stm
diff options
context:
space:
mode:
Diffstat (limited to 'stm')
-rw-r--r--stm/main.c80
1 files changed, 65 insertions, 15 deletions
diff --git a/stm/main.c b/stm/main.c
index a1b8e668f..08d82980d 100644
--- a/stm/main.c
+++ b/stm/main.c
@@ -24,10 +24,10 @@
#include "timer.h"
#include "audio.h"
-static FATFS fatfs0;
-
extern uint32_t _heap_start;
+static FATFS fatfs0;
+
void flash_error(int n) {
for (int i = 0; i < n; i++) {
led_state(PYB_LED_R1, 1);
@@ -376,9 +376,12 @@ void do_repl(void) {
py_obj_t module_fun = rt_make_function_from_id(1);
if (module_fun != py_const_none) {
nlr_buf_t nlr;
+ uint32_t start = sys_tick_counter;
if (nlr_push(&nlr) == 0) {
rt_call_function_0(module_fun);
nlr_pop();
+ uint32_t ticks = sys_tick_counter - start; // TODO implement a function that does this properly
+ printf("(took %lu ms)\n", ticks);
} else {
// uncaught exception
py_obj_print((py_obj_t)nlr.ret_val);
@@ -468,7 +471,9 @@ void servo_init(void) {
// TIM2 clock enable
RCC_APB1PeriphClockCmd(RCC_APB1Periph_TIM2, ENABLE);
- // GPIOC Configuration: TIM2_CH3 (PB10)
+ // for PB10
+ /*
+ // GPIOB Configuration: TIM2_CH3 (PB10)
GPIO_InitTypeDef GPIO_InitStructure;
GPIO_InitStructure.GPIO_Pin = GPIO_Pin_10;
GPIO_InitStructure.GPIO_Mode = GPIO_Mode_AF;
@@ -479,6 +484,25 @@ void servo_init(void) {
// Connect TIM2 pins to AF1
GPIO_PinAFConfig(GPIOB, GPIO_PinSource10, GPIO_AF_TIM2);
+ */
+
+ // for PA0, PA1, PA2, PA3
+ {
+ // GPIOA Configuration: TIM2_CH0, TIM2_CH1 (PA0, PA1)
+ GPIO_InitTypeDef GPIO_InitStructure;
+ GPIO_InitStructure.GPIO_Pin = GPIO_Pin_0 | GPIO_Pin_1 | GPIO_Pin_2 | GPIO_Pin_3;
+ GPIO_InitStructure.GPIO_Mode = GPIO_Mode_AF;
+ GPIO_InitStructure.GPIO_Speed = GPIO_Speed_2MHz;
+ GPIO_InitStructure.GPIO_OType = GPIO_OType_PP;
+ GPIO_InitStructure.GPIO_PuPd = GPIO_PuPd_NOPULL;
+ GPIO_Init(GPIOA, &GPIO_InitStructure);
+
+ // Connect TIM2 pins to AF1
+ GPIO_PinAFConfig(GPIOA, GPIO_PinSource0, GPIO_AF_TIM2);
+ GPIO_PinAFConfig(GPIOA, GPIO_PinSource1, GPIO_AF_TIM2);
+ GPIO_PinAFConfig(GPIOA, GPIO_PinSource2, GPIO_AF_TIM2);
+ GPIO_PinAFConfig(GPIOA, GPIO_PinSource3, GPIO_AF_TIM2);
+ }
// Compute the prescaler value so TIM2 runs at 100kHz
uint16_t PrescalerValue = (uint16_t) ((SystemCoreClock / 2) / 100000) - 1;
@@ -491,16 +515,22 @@ void servo_init(void) {
TIM_TimeBaseStructure.TIM_CounterMode = TIM_CounterMode_Up;
TIM_TimeBaseInit(TIM2, &TIM_TimeBaseStructure);
- // PWM1 Mode configuration: Channel1
+ // PWM Mode configuration
TIM_OCInitTypeDef TIM_OCInitStructure;
TIM_OCInitStructure.TIM_OCMode = TIM_OCMode_PWM1;
TIM_OCInitStructure.TIM_OutputState = TIM_OutputState_Enable;
TIM_OCInitStructure.TIM_Pulse = 150; // units of 10us
TIM_OCInitStructure.TIM_OCPolarity = TIM_OCPolarity_High;
- TIM_OC3Init(TIM2, &TIM_OCInitStructure);
+ TIM_OC1Init(TIM2, &TIM_OCInitStructure); // channel 1
+ TIM_OC2Init(TIM2, &TIM_OCInitStructure); // channel 2
+ TIM_OC3Init(TIM2, &TIM_OCInitStructure); // channel 3
+ TIM_OC4Init(TIM2, &TIM_OCInitStructure); // channel 4
// ?
- TIM_OC3PreloadConfig(TIM2, TIM_OCPreload_Enable);
+ TIM_OC1PreloadConfig(TIM2, TIM_OCPreload_Enable); // channel 1
+ TIM_OC2PreloadConfig(TIM2, TIM_OCPreload_Enable); // channel 2
+ TIM_OC3PreloadConfig(TIM2, TIM_OCPreload_Enable); // channel 3
+ TIM_OC4PreloadConfig(TIM2, TIM_OCPreload_Enable); // channel 4
// ?
TIM_ARRPreloadConfig(TIM2, ENABLE);
@@ -509,11 +539,17 @@ void servo_init(void) {
TIM_Cmd(TIM2, ENABLE);
}
-py_obj_t pyb_servo_set(py_obj_t value) {
+py_obj_t pyb_servo_set(py_obj_t port, py_obj_t value) {
+ int p = py_obj_get_int(port);
int v = py_obj_get_int(value);
if (v < 100) { v = 100; }
if (v > 200) { v = 200; }
- TIM2->CCR3 = v;
+ switch (p) {
+ case 1: TIM2->CCR1 = v; break;
+ case 2: TIM2->CCR2 = v; break;
+ case 3: TIM2->CCR3 = v; break;
+ case 4: TIM2->CCR4 = v; break;
+ }
return py_const_none;
}
@@ -527,19 +563,33 @@ py_obj_t pyb_pwm_set(py_obj_t period, py_obj_t pulse) {
#define MMA_ADDR (0x4c)
+int mma_buf[12];
+
py_obj_t pyb_mma_read(void) {
+ for (int i = 0; i <= 6; i += 3) {
+ mma_buf[0 + i] = mma_buf[0 + i + 3];
+ mma_buf[1 + i] = mma_buf[1 + i + 3];
+ mma_buf[2 + i] = mma_buf[2 + i + 3];
+ }
+
mma_start(MMA_ADDR, 1);
mma_send_byte(0);
mma_restart(MMA_ADDR, 0);
- py_obj_t data[4];
- for (int i = 3; i >= 1; i--) {
+ for (int i = 0; i <= 2; i++) {
int v = mma_read_ack() & 0x3f;
if (v & 0x20) {
v |= ~0x1f;
}
- data[i] = py_obj_new_int(v);
+ mma_buf[9 + i] = v;
}
- data[0] = py_obj_new_int(mma_read_nack());
+ int jolt_info = mma_read_nack();
+
+ py_obj_t data[4];
+ data[0] = py_obj_new_int(jolt_info);
+ data[1] = py_obj_new_int(mma_buf[2] + mma_buf[5] + mma_buf[8] + mma_buf[11]);
+ data[2] = py_obj_new_int(mma_buf[1] + mma_buf[4] + mma_buf[7] + mma_buf[10]);
+ data[3] = py_obj_new_int(mma_buf[0] + mma_buf[3] + mma_buf[6] + mma_buf[9]);
+
return rt_build_tuple(4, data); // items in reverse order in data
}
@@ -742,7 +792,7 @@ soft_reset:
rt_init();
// LCD init
- lcd_init();
+ //lcd_init(); disabled while servos on PA0 PA1
// servo
servo_init();
@@ -770,7 +820,7 @@ soft_reset:
rt_store_attr(m, qstr_from_str_static("delay"), rt_make_function_1(pyb_delay));
rt_store_attr(m, qstr_from_str_static("led"), rt_make_function_1(pyb_led));
rt_store_attr(m, qstr_from_str_static("sw"), rt_make_function_0(pyb_sw));
- rt_store_attr(m, qstr_from_str_static("servo"), rt_make_function_1(pyb_servo_set));
+ rt_store_attr(m, qstr_from_str_static("servo"), rt_make_function_2(pyb_servo_set));
rt_store_attr(m, qstr_from_str_static("pwm"), rt_make_function_2(pyb_pwm_set));
rt_store_attr(m, qstr_from_str_static("mma"), rt_make_function_0(pyb_mma_read));
rt_store_attr(m, qstr_from_str_static("hid"), rt_make_function_1(pyb_hid_send_report));
@@ -1126,7 +1176,7 @@ soft_reset:
// SD card testing
if (1) {
extern void sdio_init(void);
- sdio_init();
+ //sdio_init();
}
printf("PYB: sync filesystems\n");
generated by cgit v1.2.3 (git 2.25.1) at 2026-03-17 21:11:24 +0000