diff options
Diffstat (limited to 'stm/stmusbh/usbh_def.h')
| -rw-r--r-- | stm/stmusbh/usbh_def.h | 288 |
1 files changed, 0 insertions, 288 deletions
diff --git a/stm/stmusbh/usbh_def.h b/stm/stmusbh/usbh_def.h deleted file mode 100644 index 27a102a0e..000000000 --- a/stm/stmusbh/usbh_def.h +++ /dev/null @@ -1,288 +0,0 @@ -/**
- ******************************************************************************
- * @file usbh_def.h
- * @author MCD Application Team
- * @version V2.1.0
- * @date 19-March-2012
- * @brief Definitions used in the USB host library
- ******************************************************************************
- * @attention
- *
- * <h2><center>© COPYRIGHT 2012 STMicroelectronics</center></h2>
- *
- * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
- * You may not use this file except in compliance with the License.
- * You may obtain a copy of the License at:
- *
- * http://www.st.com/software_license_agreement_liberty_v2
- *
- * Unless required by applicable law or agreed to in writing, software
- * distributed under the License is distributed on an "AS IS" BASIS,
- * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- * See the License for the specific language governing permissions and
- * limitations under the License.
- *
- ******************************************************************************
- */
-
-/** @addtogroup USBH_LIB
- * @{
- */
-
-/** @addtogroup USBH_LIB_CORE
-* @{
-*/
-
-/** @defgroup USBH_DEF
- * @brief This file is includes USB descriptors
- * @{
- */
-
-#ifndef USBH_DEF_H
-#define USBH_DEF_H
-
-#ifndef USBH_NULL
-#define USBH_NULL ((void *)0)
-#endif
-
-#ifndef FALSE
-#define FALSE 0
-#endif
-
-#ifndef TRUE
-#define TRUE 1
-#endif
-
-
-#define ValBit(VAR,POS) (VAR & (1 << POS))
-#define SetBit(VAR,POS) (VAR |= (1 << POS))
-#define ClrBit(VAR,POS) (VAR &= ((1 << POS)^255))
-
-#define LE16(addr) (((u16)(*((u8 *)(addr))))\
- + (((u16)(*(((u8 *)(addr)) + 1))) << 8))
-
-#define USB_LEN_DESC_HDR 0x02
-#define USB_LEN_DEV_DESC 0x12
-#define USB_LEN_CFG_DESC 0x09
-#define USB_LEN_IF_DESC 0x09
-#define USB_LEN_EP_DESC 0x07
-#define USB_LEN_OTG_DESC 0x03
-#define USB_LEN_SETUP_PKT 0x08
-
-/* bmRequestType :D7 Data Phase Transfer Direction */
-#define USB_REQ_DIR_MASK 0x80
-#define USB_H2D 0x00
-#define USB_D2H 0x80
-
-/* bmRequestType D6..5 Type */
-#define USB_REQ_TYPE_STANDARD 0x00
-#define USB_REQ_TYPE_CLASS 0x20
-#define USB_REQ_TYPE_VENDOR 0x40
-#define USB_REQ_TYPE_RESERVED 0x60
-
-/* bmRequestType D4..0 Recipient */
-#define USB_REQ_RECIPIENT_DEVICE 0x00
-#define USB_REQ_RECIPIENT_INTERFACE 0x01
-#define USB_REQ_RECIPIENT_ENDPOINT 0x02
-#define USB_REQ_RECIPIENT_OTHER 0x03
-
-/* Table 9-4. Standard Request Codes */
-/* bRequest , Value */
-#define USB_REQ_GET_STATUS 0x00
-#define USB_REQ_CLEAR_FEATURE 0x01
-#define USB_REQ_SET_FEATURE 0x03
-#define USB_REQ_SET_ADDRESS 0x05
-#define USB_REQ_GET_DESCRIPTOR 0x06
-#define USB_REQ_SET_DESCRIPTOR 0x07
-#define USB_REQ_GET_CONFIGURATION 0x08
-#define USB_REQ_SET_CONFIGURATION 0x09
-#define USB_REQ_GET_INTERFACE 0x0A
-#define USB_REQ_SET_INTERFACE 0x0B
-#define USB_REQ_SYNCH_FRAME 0x0C
-
-/* Table 9-5. Descriptor Types of USB Specifications */
-#define USB_DESC_TYPE_DEVICE 1
-#define USB_DESC_TYPE_CONFIGURATION 2
-#define USB_DESC_TYPE_STRING 3
-#define USB_DESC_TYPE_INTERFACE 4
-#define USB_DESC_TYPE_ENDPOINT 5
-#define USB_DESC_TYPE_DEVICE_QUALIFIER 6
-#define USB_DESC_TYPE_OTHER_SPEED_CONFIGURATION 7
-#define USB_DESC_TYPE_INTERFACE_POWER 8
-#define USB_DESC_TYPE_HID 0x21
-#define USB_DESC_TYPE_HID_REPORT 0x22
-
-
-#define USB_DEVICE_DESC_SIZE 18
-#define USB_CONFIGURATION_DESC_SIZE 9
-#define USB_HID_DESC_SIZE 9
-#define USB_INTERFACE_DESC_SIZE 9
-#define USB_ENDPOINT_DESC_SIZE 7
-
-/* Descriptor Type and Descriptor Index */
-/* Use the following values when calling the function USBH_GetDescriptor */
-#define USB_DESC_DEVICE ((USB_DESC_TYPE_DEVICE << 8) & 0xFF00)
-#define USB_DESC_CONFIGURATION ((USB_DESC_TYPE_CONFIGURATION << 8) & 0xFF00)
-#define USB_DESC_STRING ((USB_DESC_TYPE_STRING << 8) & 0xFF00)
-#define USB_DESC_INTERFACE ((USB_DESC_TYPE_INTERFACE << 8) & 0xFF00)
-#define USB_DESC_ENDPOINT ((USB_DESC_TYPE_INTERFACE << 8) & 0xFF00)
-#define USB_DESC_DEVICE_QUALIFIER ((USB_DESC_TYPE_DEVICE_QUALIFIER << 8) & 0xFF00)
-#define USB_DESC_OTHER_SPEED_CONFIGURATION ((USB_DESC_TYPE_OTHER_SPEED_CONFIGURATION << 8) & 0xFF00)
-#define USB_DESC_INTERFACE_POWER ((USB_DESC_TYPE_INTERFACE_POWER << 8) & 0xFF00)
-#define USB_DESC_HID_REPORT ((USB_DESC_TYPE_HID_REPORT << 8) & 0xFF00)
-#define USB_DESC_HID ((USB_DESC_TYPE_HID << 8) & 0xFF00)
-
-
-#define USB_EP_TYPE_CTRL 0x00
-#define USB_EP_TYPE_ISOC 0x01
-#define USB_EP_TYPE_BULK 0x02
-#define USB_EP_TYPE_INTR 0x03
-
-#define USB_EP_DIR_OUT 0x00
-#define USB_EP_DIR_IN 0x80
-#define USB_EP_DIR_MSK 0x80
-
-/* supported classes */
-#define USB_MSC_CLASS 0x08
-#define USB_HID_CLASS 0x03
-
-/* Interface Descriptor field values for HID Boot Protocol */
-#define HID_BOOT_CODE 0x01
-#define HID_KEYBRD_BOOT_CODE 0x01
-#define HID_MOUSE_BOOT_CODE 0x02
-
-/* As per USB specs 9.2.6.4 :Standard request with data request timeout: 5sec
- Standard request with no data stage timeout : 50ms */
-#define DATA_STAGE_TIMEOUT 5000
-#define NODATA_STAGE_TIMEOUT 50
-
-/**
- * @}
- */
-
-
-#define USBH_CONFIGURATION_DESCRIPTOR_SIZE (USB_CONFIGURATION_DESC_SIZE \
- + USB_INTERFACE_DESC_SIZE\
- + (USBH_MAX_NUM_ENDPOINTS * USB_ENDPOINT_DESC_SIZE))
-
-
-#define CONFIG_DESC_wTOTAL_LENGTH (ConfigurationDescriptorData.ConfigDescfield.\
- ConfigurationDescriptor.wTotalLength)
-
-
-/* This Union is copied from usb_core.h */
-typedef union
-{
- uint16_t w;
- struct BW
- {
- uint8_t msb;
- uint8_t lsb;
- }
- bw;
-}
-uint16_t_uint8_t;
-
-
-typedef union _USB_Setup
-{
- uint8_t d8[8];
-
- struct _SetupPkt_Struc
- {
- uint8_t bmRequestType;
- uint8_t bRequest;
- uint16_t_uint8_t wValue;
- uint16_t_uint8_t wIndex;
- uint16_t_uint8_t wLength;
- } b;
-}
-USB_Setup_TypeDef;
-
-typedef struct _DescHeader
-{
- uint8_t bLength;
- uint8_t bDescriptorType;
-}
-USBH_DescHeader_t;
-
-typedef struct _DeviceDescriptor
-{
- uint8_t bLength;
- uint8_t bDescriptorType;
- uint16_t bcdUSB; /* USB Specification Number which device complies too */
- uint8_t bDeviceClass;
- uint8_t bDeviceSubClass;
- uint8_t bDeviceProtocol;
- /* If equal to Zero, each interface specifies its own class
- code if equal to 0xFF, the class code is vendor specified.
- Otherwise field is valid Class Code.*/
- uint8_t bMaxPacketSize;
- uint16_t idVendor; /* Vendor ID (Assigned by USB Org) */
- uint16_t idProduct; /* Product ID (Assigned by Manufacturer) */
- uint16_t bcdDevice; /* Device Release Number */
- uint8_t iManufacturer; /* Index of Manufacturer String Descriptor */
- uint8_t iProduct; /* Index of Product String Descriptor */
- uint8_t iSerialNumber; /* Index of Serial Number String Descriptor */
- uint8_t bNumConfigurations; /* Number of Possible Configurations */
-}
-USBH_DevDesc_TypeDef;
-
-
-typedef struct _ConfigurationDescriptor
-{
- uint8_t bLength;
- uint8_t bDescriptorType;
- uint16_t wTotalLength; /* Total Length of Data Returned */
- uint8_t bNumInterfaces; /* Number of Interfaces */
- uint8_t bConfigurationValue; /* Value to use as an argument to select this configuration*/
- uint8_t iConfiguration; /*Index of String Descriptor Describing this configuration */
- uint8_t bmAttributes; /* D7 Bus Powered , D6 Self Powered, D5 Remote Wakeup , D4..0 Reserved (0)*/
- uint8_t bMaxPower; /*Maximum Power Consumption */
-}
-USBH_CfgDesc_TypeDef;
-
-
-typedef struct _HIDDescriptor
-{
- uint8_t bLength;
- uint8_t bDescriptorType;
- uint16_t bcdHID; /* indicates what endpoint this descriptor is describing */
- uint8_t bCountryCode; /* specifies the transfer type. */
- uint8_t bNumDescriptors; /* specifies the transfer type. */
- uint8_t bReportDescriptorType; /* Maximum Packet Size this endpoint is capable of sending or receiving */
- uint16_t wItemLength; /* is used to specify the polling interval of certain transfers. */
-}
-USBH_HIDDesc_TypeDef;
-
-
-typedef struct _InterfaceDescriptor
-{
- uint8_t bLength;
- uint8_t bDescriptorType;
- uint8_t bInterfaceNumber;
- uint8_t bAlternateSetting; /* Value used to select alternative setting */
- uint8_t bNumEndpoints; /* Number of Endpoints used for this interface */
- uint8_t bInterfaceClass; /* Class Code (Assigned by USB Org) */
- uint8_t bInterfaceSubClass; /* Subclass Code (Assigned by USB Org) */
- uint8_t bInterfaceProtocol; /* Protocol Code */
- uint8_t iInterface; /* Index of String Descriptor Describing this interface */
-
-}
-USBH_InterfaceDesc_TypeDef;
-
-
-typedef struct _EndpointDescriptor
-{
- uint8_t bLength;
- uint8_t bDescriptorType;
- uint8_t bEndpointAddress; /* indicates what endpoint this descriptor is describing */
- uint8_t bmAttributes; /* specifies the transfer type. */
- uint16_t wMaxPacketSize; /* Maximum Packet Size this endpoint is capable of sending or receiving */
- uint8_t bInterval; /* is used to specify the polling interval of certain transfers. */
-}
-USBH_EpDesc_TypeDef;
-#endif
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
-
|