diff options
Diffstat (limited to 'ports/stm32/boards/NUCLEO_L432KC/mpconfigboard.h')
| -rw-r--r-- | ports/stm32/boards/NUCLEO_L432KC/mpconfigboard.h | 59 |
1 files changed, 59 insertions, 0 deletions
diff --git a/ports/stm32/boards/NUCLEO_L432KC/mpconfigboard.h b/ports/stm32/boards/NUCLEO_L432KC/mpconfigboard.h new file mode 100644 index 000000000..aa8c9e674 --- /dev/null +++ b/ports/stm32/boards/NUCLEO_L432KC/mpconfigboard.h @@ -0,0 +1,59 @@ +#define MICROPY_HW_BOARD_NAME "NUCLEO-L432KC" +#define MICROPY_HW_MCU_NAME "STM32L432KC" + +#define MICROPY_EMIT_THUMB (0) +#define MICROPY_EMIT_INLINE_THUMB (0) +#define MICROPY_PY_USOCKET (0) +#define MICROPY_PY_NETWORK (0) +#define MICROPY_PY_STM (0) +#define MICROPY_PY_PYB_LEGACY (0) +#define MICROPY_VFS_FAT (0) + +#define MICROPY_HW_ENABLE_INTERNAL_FLASH_STORAGE (0) +#define MICROPY_HW_ENABLE_RTC (1) +#define MICROPY_HW_ENABLE_ADC (1) +#define MICROPY_HW_ENABLE_DAC (1) +#define MICROPY_HW_ENABLE_TIMER (1) +#define MICROPY_HW_HAS_SWITCH (0) + +// MSI is used and is 4MHz +#define MICROPY_HW_CLK_PLLM (1) +#define MICROPY_HW_CLK_PLLN (16) +#define MICROPY_HW_CLK_PLLR (2) +#define MICROPY_HW_CLK_PLLP (7) +#define MICROPY_HW_CLK_PLLQ (2) + +// UART config +#define MICROPY_HW_UART1_TX (pin_B6) +#define MICROPY_HW_UART1_RX (pin_B7) +#define MICROPY_HW_UART2_TX (pin_A2) // VCP TX +#define MICROPY_HW_UART2_RX (pin_A15) // VCP RX + +#define MICROPY_HW_UART_REPL PYB_UART_2 +#define MICROPY_HW_UART_REPL_BAUD 115200 + +#define MICROPY_HW_FLASH_LATENCY FLASH_LATENCY_4 + +// I2C busses +#define MICROPY_HW_I2C1_SCL (pin_A9) +#define MICROPY_HW_I2C1_SDA (pin_A10) +#define MICROPY_HW_I2C3_SCL (pin_A7) +#define MICROPY_HW_I2C3_SDA (pin_B4) + +// SPI busses +#define MICROPY_HW_SPI1_NSS (pin_B0) +#define MICROPY_HW_SPI1_SCK (pin_A5) +#define MICROPY_HW_SPI1_MISO (pin_A6) +#define MICROPY_HW_SPI1_MOSI (pin_A7) +#define MICROPY_HW_SPI3_NSS (pin_A4) +#define MICROPY_HW_SPI3_SCK (pin_B3) +#define MICROPY_HW_SPI3_MISO (pin_B4) +#define MICROPY_HW_SPI3_MOSI (pin_B5) + +// LEDs +#define MICROPY_HW_LED1 (pin_B3) // Green LD3 LED on Nucleo +#define MICROPY_HW_LED_ON(pin) (mp_hal_pin_high(pin)) +#define MICROPY_HW_LED_OFF(pin) (mp_hal_pin_low(pin)) + +// USB config +#define MICROPY_HW_USB_FS (0) |