diff options
Diffstat (limited to 'ports/rp2/CMakeLists.txt')
| -rw-r--r-- | ports/rp2/CMakeLists.txt | 194 |
1 files changed, 121 insertions, 73 deletions
diff --git a/ports/rp2/CMakeLists.txt b/ports/rp2/CMakeLists.txt index cf20245a3..3968194dc 100644 --- a/ports/rp2/CMakeLists.txt +++ b/ports/rp2/CMakeLists.txt @@ -6,8 +6,8 @@ if(NOT CMAKE_BUILD_TYPE) endif() # Set main target and component locations -set(MICROPYTHON_TARGET firmware) -get_filename_component(MPY_DIR "../.." ABSOLUTE) +set(MICROPY_TARGET firmware) +get_filename_component(MICROPY_DIR "../.." ABSOLUTE) if (PICO_SDK_PATH_OVERRIDE) set(PICO_SDK_PATH ${PICO_SDK_PATH_OVERRIDE}) else() @@ -15,42 +15,46 @@ else() endif() # Use the local tinyusb instead of the one in pico-sdk -set(PICO_TINYUSB_PATH ${MPY_DIR}/lib/tinyusb) +set(PICO_TINYUSB_PATH ${MICROPY_DIR}/lib/tinyusb) # Include component cmake fragments -include(micropy_py.cmake) -include(micropy_extmod.cmake) +include(${MICROPY_DIR}/py/py.cmake) +include(${MICROPY_DIR}/extmod/extmod.cmake) include(${PICO_SDK_PATH}/pico_sdk_init.cmake) # Define the top-level project -project(${MICROPYTHON_TARGET}) +project(${MICROPY_TARGET}) pico_sdk_init() -add_executable(${MICROPYTHON_TARGET}) - -set(SOURCE_LIB - ${MPY_DIR}/lib/littlefs/lfs1.c - ${MPY_DIR}/lib/littlefs/lfs1_util.c - ${MPY_DIR}/lib/littlefs/lfs2.c - ${MPY_DIR}/lib/littlefs/lfs2_util.c - ${MPY_DIR}/lib/mp-readline/readline.c - ${MPY_DIR}/lib/oofatfs/ff.c - ${MPY_DIR}/lib/oofatfs/ffunicode.c - ${MPY_DIR}/lib/timeutils/timeutils.c - ${MPY_DIR}/lib/utils/gchelper_m0.s - ${MPY_DIR}/lib/utils/gchelper_native.c - ${MPY_DIR}/lib/utils/mpirq.c - ${MPY_DIR}/lib/utils/stdout_helpers.c - ${MPY_DIR}/lib/utils/sys_stdio_mphal.c - ${MPY_DIR}/lib/utils/pyexec.c +add_executable(${MICROPY_TARGET}) + +set(MICROPY_QSTRDEFS_PORT + ${PROJECT_SOURCE_DIR}/qstrdefsport.h +) + +set(MICROPY_SOURCE_LIB + ${MICROPY_DIR}/lib/littlefs/lfs1.c + ${MICROPY_DIR}/lib/littlefs/lfs1_util.c + ${MICROPY_DIR}/lib/littlefs/lfs2.c + ${MICROPY_DIR}/lib/littlefs/lfs2_util.c + ${MICROPY_DIR}/lib/mp-readline/readline.c + ${MICROPY_DIR}/lib/oofatfs/ff.c + ${MICROPY_DIR}/lib/oofatfs/ffunicode.c + ${MICROPY_DIR}/lib/timeutils/timeutils.c + ${MICROPY_DIR}/lib/utils/gchelper_m0.s + ${MICROPY_DIR}/lib/utils/gchelper_native.c + ${MICROPY_DIR}/lib/utils/mpirq.c + ${MICROPY_DIR}/lib/utils/pyexec.c + ${MICROPY_DIR}/lib/utils/stdout_helpers.c + ${MICROPY_DIR}/lib/utils/sys_stdio_mphal.c ) -set(SOURCE_DRIVERS - ${MPY_DIR}/drivers/bus/softspi.c +set(MICROPY_SOURCE_DRIVERS + ${MICROPY_DIR}/drivers/bus/softspi.c ) -set(SOURCE_PORT +set(MICROPY_SOURCE_PORT fatfs_port.c machine_adc.c machine_i2c.c @@ -73,11 +77,11 @@ set(SOURCE_PORT uart.c ) -set(SOURCE_QSTR - ${SOURCE_PY} - ${SOURCE_EXTMOD} - ${MPY_DIR}/lib/utils/mpirq.c - ${MPY_DIR}/lib/utils/sys_stdio_mphal.c +set(MICROPY_SOURCE_QSTR + ${MICROPY_SOURCE_PY} + ${MICROPY_SOURCE_EXTMOD} + ${MICROPY_DIR}/lib/utils/mpirq.c + ${MICROPY_DIR}/lib/utils/sys_stdio_mphal.c ${PROJECT_SOURCE_DIR}/machine_adc.c ${PROJECT_SOURCE_DIR}/machine_i2c.c ${PROJECT_SOURCE_DIR}/machine_pin.c @@ -94,37 +98,65 @@ set(SOURCE_QSTR ${PROJECT_SOURCE_DIR}/rp2_pio.c ) -set(MPY_QSTR_DEFS ${PROJECT_SOURCE_DIR}/qstrdefsport.h) +set(PICO_SDK_COMPONENTS + hardware_adc + hardware_base + hardware_clocks + hardware_dma + hardware_flash + hardware_gpio + hardware_i2c + hardware_irq + hardware_pio + hardware_pwm + hardware_regs + hardware_rtc + hardware_spi + hardware_structs + hardware_sync + hardware_timer + hardware_uart + hardware_watchdog + pico_base_headers + pico_binary_info + pico_bootrom + pico_multicore + pico_platform + pico_stdio + pico_stdlib + pico_sync + pico_time + pico_unique_id + tinyusb_device +) # Define mpy-cross flags and frozen manifest -set(MPY_CROSS_FLAGS -march=armv7m) -set(FROZEN_MANIFEST ${PROJECT_SOURCE_DIR}/manifest.py) - -include(micropy_rules.cmake) - -target_sources(${MICROPYTHON_TARGET} PRIVATE - ${SOURCE_PY} - ${SOURCE_EXTMOD} - ${SOURCE_LIB} - ${SOURCE_DRIVERS} - ${SOURCE_PORT} +set(MICROPY_CROSS_FLAGS -march=armv7m) +set(MICROPY_FROZEN_MANIFEST ${PROJECT_SOURCE_DIR}/manifest.py) + +target_sources(${MICROPY_TARGET} PRIVATE + ${MICROPY_SOURCE_PY} + ${MICROPY_SOURCE_EXTMOD} + ${MICROPY_SOURCE_LIB} + ${MICROPY_SOURCE_DRIVERS} + ${MICROPY_SOURCE_PORT} ) -target_include_directories(${MICROPYTHON_TARGET} PRIVATE - "${PROJECT_SOURCE_DIR}" - "${MPY_DIR}" - "${CMAKE_BINARY_DIR}" - ) +target_include_directories(${MICROPY_TARGET} PRIVATE + "${PROJECT_SOURCE_DIR}" + "${MICROPY_DIR}" + "${CMAKE_BINARY_DIR}" +) -target_compile_options(${MICROPYTHON_TARGET} PRIVATE +target_compile_options(${MICROPY_TARGET} PRIVATE -Wall - #-Werror - -DFFCONF_H=\"${MPY_DIR}/lib/oofatfs/ffconf.h\" - -DLFS1_NO_MALLOC -DLFS1_NO_DEBUG -DLFS1_NO_WARN -DLFS1_NO_ERROR -DLFS1_NO_ASSERT - -DLFS2_NO_MALLOC -DLFS2_NO_DEBUG -DLFS2_NO_WARN -DLFS2_NO_ERROR -DLFS2_NO_ASSERT + -Werror ) -target_compile_definitions(${MICROPYTHON_TARGET} PRIVATE +target_compile_definitions(${MICROPY_TARGET} PRIVATE + FFCONF_H=\"${MICROPY_OOFATFS_DIR}/ffconf.h\" + LFS1_NO_MALLOC LFS1_NO_DEBUG LFS1_NO_WARN LFS1_NO_ERROR LFS1_NO_ASSERT + LFS2_NO_MALLOC LFS2_NO_DEBUG LFS2_NO_WARN LFS2_NO_ERROR LFS2_NO_ASSERT PICO_FLOAT_PROPAGATE_NANS=1 PICO_STACK_SIZE=0x2000 PICO_CORE1_STACK_SIZE=0 @@ -134,34 +166,50 @@ target_compile_definitions(${MICROPYTHON_TARGET} PRIVATE PICO_NO_BI_STDIO_UART=1 # we call it UART REPL ) -target_link_libraries(${MICROPYTHON_TARGET} - hardware_adc - hardware_dma - hardware_flash - hardware_i2c - hardware_pio - hardware_pwm - hardware_rtc - hardware_spi - hardware_sync - pico_multicore - pico_stdlib_headers - pico_stdlib - pico_unique_id - tinyusb_device +target_link_libraries(${MICROPY_TARGET} + ${PICO_SDK_COMPONENTS} ) # todo this is a bit brittle, but we want to move a few source files into RAM (which requires # a linker script modification) until we explicitly add macro calls around the function # defs to move them into RAM. if (PICO_ON_DEVICE AND NOT PICO_NO_FLASH AND NOT PICO_COPY_TO_RAM) - pico_set_linker_script(${MICROPYTHON_TARGET} ${CMAKE_CURRENT_LIST_DIR}/memmap_mp.ld) + pico_set_linker_script(${MICROPY_TARGET} ${CMAKE_CURRENT_LIST_DIR}/memmap_mp.ld) endif() -pico_add_extra_outputs(${MICROPYTHON_TARGET}) +pico_add_extra_outputs(${MICROPY_TARGET}) -add_custom_command(TARGET ${MICROPYTHON_TARGET} +add_custom_command(TARGET ${MICROPY_TARGET} POST_BUILD - COMMAND arm-none-eabi-size --format=berkeley ${PROJECT_BINARY_DIR}/${MICROPYTHON_TARGET}.elf + COMMAND arm-none-eabi-size --format=berkeley ${PROJECT_BINARY_DIR}/${MICROPY_TARGET}.elf VERBATIM ) + +# Collect all the include directories and compile definitions for the pico-sdk components. +macro(_process_target targ) + if(TARGET ${targ}) + get_target_property(type ${targ} TYPE) + set(_inc OFF) + set(_def OFF) + if(${type} STREQUAL STATIC_LIBRARY) + get_target_property(_inc ${targ} INCLUDE_DIRECTORIES) + get_target_property(_def ${targ} COMPILE_DEFINITIONS) + elseif(${type} STREQUAL INTERFACE_LIBRARY) + get_target_property(_inc ${targ} INTERFACE_INCLUDE_DIRECTORIES) + get_target_property(_def ${targ} INTERFACE_COMPILE_DEFINITIONS) + endif() + if(_inc) + list(APPEND MICROPY_CPP_INC_EXTRA ${_inc}) + endif() + if(_def) + list(APPEND MICROPY_CPP_DEF_EXTRA ${_def}) + endif() + endif() +endmacro() +foreach(comp ${PICO_SDK_COMPONENTS}) + _process_target(${comp}) + _process_target(${comp}_headers) +endforeach() + +# Include the main MicroPython cmake rules. +include(${MICROPY_DIR}/py/mkrules.cmake) |