1 files changed, 0 insertions, 76 deletions
diff --git a/cc3200/tools/smoke.py b/cc3200/tools/smoke.py
deleted file mode 100644
index 3ade11cf8..000000000
--- a/cc3200/tools/smoke.py
+++ /dev/null
@@ -1,76 +0,0 @@
-from machine import Pin
-from machine import RTC
-import time
-import os
-
-"""
-Execute it like this:
-
-python3 run-tests --target wipy --device 192.168.1.1 ../cc3200/tools/smoke.py
-"""
-
-pin_map = [23, 24, 11, 12, 13, 14, 15, 16, 17, 22, 28, 10, 9, 8, 7, 6, 30, 31, 3, 0, 4, 5]
-test_bytes = os.urandom(1024)
-
-def test_pin_read (pull):
-    # enable the pull resistor on all pins, then read the value
-    for p in pin_map:
-        pin = Pin('GP' + str(p), mode=Pin.IN, pull=pull)
-        # read the pin value
-        print(pin())
-
-def test_pin_shorts (pull):
-    if pull == Pin.PULL_UP:
-        pull_inverted = Pin.PULL_DOWN
-    else:
-        pull_inverted = Pin.PULL_UP
-    # enable all pulls of the specified type
-    for p in pin_map:
-        pin = Pin('GP' + str(p), mode=Pin.IN, pull=pull_inverted)
-    # then change the pull one pin at a time and read its value
-    i = 0
-    while i < len(pin_map):
-        pin = Pin('GP' + str(pin_map[i]), mode=Pin.IN, pull=pull)
-        Pin('GP' + str(pin_map[i - 1]), mode=Pin.IN, pull=pull_inverted)
-        i += 1
-        # read the pin value
-        print(pin())
-
-test_pin_read(Pin.PULL_UP)
-test_pin_read(Pin.PULL_DOWN)
-test_pin_shorts(Pin.PULL_UP)
-test_pin_shorts(Pin.PULL_DOWN)
-
-# create a test directory
-os.mkdir('/flash/test')
-os.chdir('/flash/test')
-print(os.getcwd())
-# create a new file
-f = open('test.txt', 'w')
-n_w = f.write(test_bytes)
-print(n_w == len(test_bytes))
-f.close()
-f = open('test.txt', 'r')
-r = bytes(f.read(), 'ascii')
-# check that we can write and read it correctly
-print(r == test_bytes)
-f.close()
-os.remove('test.txt')
-os.chdir('..')
-os.rmdir('test')
-
-ls = os.listdir()
-print('test' not in ls)
-print(ls)
-
-# test the real time clock
-rtc = RTC()
-while rtc.now()[6] > 800:
-    pass
-
-time1 = rtc.now()
-time.sleep_ms(1000)
-time2 = rtc.now()
-print(time2[5] - time1[5] == 1)
-print(time2[6] - time1[6] < 5000) # microseconds
-