diff options
Diffstat (limited to 'cc3200/simplelink/include/device.h')
| -rw-r--r-- | cc3200/simplelink/include/device.h | 635 |
1 files changed, 0 insertions, 635 deletions
diff --git a/cc3200/simplelink/include/device.h b/cc3200/simplelink/include/device.h deleted file mode 100644 index 3f505c94d..000000000 --- a/cc3200/simplelink/include/device.h +++ /dev/null @@ -1,635 +0,0 @@ -/* - * device.h - CC31xx/CC32xx Host Driver Implementation - * - * Copyright (C) 2014 Texas Instruments Incorporated - http://www.ti.com/ - * - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * - * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the - * distribution. - * - * Neither the name of Texas Instruments Incorporated nor the names of - * its contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR - * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT - * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT - * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, - * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY - * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * -*/ - -#ifndef __DEVICE_H__ -#define __DEVICE_H__ - -/*****************************************************************************/ -/* Include files */ -/*****************************************************************************/ -#include "simplelink.h" - -#ifdef __cplusplus -extern "C" { -#endif - - - -/*! - - \addtogroup device - @{ - -*/ - -/*****************************************************************************/ -/* Macro declarations */ -/*****************************************************************************/ - - -/* SL internal Error codes */ - -/* Receive this error in case there are no resources to issue the command - If possible, increase the number of MAX_CUNCURENT_ACTIONS (result in memory increase) - If not, try again later */ -#define SL_POOL_IS_EMPTY (-2000) - -/* Receive this error in case a given length for RX buffer was too small. - Receive payload was bigger than the given buffer size. Therefore, payload is cut according to receive size - Recommend to increase buffer size */ -#define SL_ESMALLBUF (-2001) - -/* Receive this error in case zero length is supplied to a "get" API - Recommend to supply length according to requested information (view options defines for help) */ -#define SL_EZEROLEN (-2002) - -/* User supplied invalid parameter */ -#define SL_INVALPARAM (-2003) - -/* End of SL internal Error codes */ - - - -/*****************************************************************************/ -/* Errors returned from the general error async event */ -/*****************************************************************************/ - -/* Send types */ -typedef enum -{ - SL_ERR_SENDER_HEALTH_MON, - SL_ERR_SENDER_CLI_UART, - SL_ERR_SENDER_SUPPLICANT, - SL_ERR_SENDER_NETWORK_STACK, - SL_ERR_SENDER_WLAN_DRV_IF, - SL_ERR_SENDER_WILINK, - SL_ERR_SENDER_INIT_APP, - SL_ERR_SENDER_NETX, - SL_ERR_SENDER_HOST_APD, - SL_ERR_SENDER_MDNS, - SL_ERR_SENDER_HTTP_SERVER, - SL_ERR_SENDER_DHCP_SERVER, - SL_ERR_SENDER_DHCP_CLIENT, - SL_ERR_DISPATCHER, - SL_ERR_NUM_SENDER_LAST=0xFF -}SlErrorSender_e; - - -/* Error codes */ -#define SL_ERROR_STATIC_ADDR_SUBNET_ERROR (-60) /* network stack error*/ -#define SL_ERROR_ILLEGAL_CHANNEL (-61) /* supplicant error */ -#define SL_ERROR_SUPPLICANT_ERROR (-72) /* init error code */ -#define SL_ERROR_HOSTAPD_INIT_FAIL (-73) /* init error code */ -#define SL_ERROR_HOSTAPD_INIT_IF_FAIL (-74) /* init error code */ -#define SL_ERROR_WLAN_DRV_INIT_FAIL (-75) /* init error code */ -#define SL_ERROR_WLAN_DRV_START_FAIL (-76) /* wlan start error */ -#define SL_ERROR_FS_FILE_TABLE_LOAD_FAILED (-77) /* init file system failed */ -#define SL_ERROR_PREFERRED_NETWORKS_FILE_LOAD_FAILED (-78) /* init file system failed */ -#define SL_ERROR_HOSTAPD_BSSID_VALIDATION_ERROR (-79) /* Ap configurations BSSID error */ -#define SL_ERROR_HOSTAPD_FAILED_TO_SETUP_INTERFACE (-80) /* Ap configurations interface error */ -#define SL_ERROR_MDNS_ENABLE_FAIL (-81) /* mDNS enable failed */ -#define SL_ERROR_HTTP_SERVER_ENABLE_FAILED (-82) /* HTTP server enable failed */ -#define SL_ERROR_DHCP_SERVER_ENABLE_FAILED (-83) /* DHCP server enable failed */ -#define SL_ERROR_PREFERRED_NETWORK_LIST_FULL (-93) /* supplicant error */ -#define SL_ERROR_PREFERRED_NETWORKS_FILE_WRITE_FAILED (-94) /* supplicant error */ -#define SL_ERROR_DHCP_CLIENT_RENEW_FAILED (-100) /* DHCP client error */ -/* WLAN Connection management status */ -#define SL_ERROR_CON_MGMT_STATUS_UNSPECIFIED (-102) -#define SL_ERROR_CON_MGMT_STATUS_AUTH_REJECT (-103) -#define SL_ERROR_CON_MGMT_STATUS_ASSOC_REJECT (-104) -#define SL_ERROR_CON_MGMT_STATUS_SECURITY_FAILURE (-105) -#define SL_ERROR_CON_MGMT_STATUS_AP_DEAUTHENTICATE (-106) -#define SL_ERROR_CON_MGMT_STATUS_AP_DISASSOCIATE (-107) -#define SL_ERROR_CON_MGMT_STATUS_ROAMING_TRIGGER (-108) -#define SL_ERROR_CON_MGMT_STATUS_DISCONNECT_DURING_CONNECT (-109) -#define SL_ERROR_CON_MGMT_STATUS_SG_RESELECT (-110) -#define SL_ERROR_CON_MGMT_STATUS_ROC_FAILURE (-111) -#define SL_ERROR_CON_MGMT_STATUS_MIC_FAILURE (-112) -/* end of WLAN connection management error statuses */ -#define SL_ERROR_WAKELOCK_ERROR_PREFIX (-115) /* Wake lock expired */ -#define SL_ERROR_LENGTH_ERROR_PREFIX (-116) /* Uart header length error */ -#define SL_ERROR_MDNS_CREATE_FAIL (-121) /* mDNS create failed */ -#define SL_ERROR_GENERAL_ERROR (-127) - - - -#define SL_DEVICE_GENERAL_CONFIGURATION (1) -#define SL_DEVICE_GENERAL_CONFIGURATION_DATE_TIME (11) -#define SL_DEVICE_GENERAL_VERSION (12) -#define SL_DEVICE_STATUS (2) - -/* - Declare the different event group classifications - The SimpleLink device send asynchronous events. Each event has a group - classification according to its nature. -*/ -/* SL_EVENT_CLASS_WLAN connection user events */ -#define SL_WLAN_CONNECT_EVENT (1) -#define SL_WLAN_DISCONNECT_EVENT (2) -/* WLAN Smart Config user events */ -#define SL_WLAN_SMART_CONFIG_COMPLETE_EVENT (3) -#define SL_WLAN_SMART_CONFIG_STOP_EVENT (4) -/* WLAN AP user events */ -#define SL_WLAN_STA_CONNECTED_EVENT (5) -#define SL_WLAN_STA_DISCONNECTED_EVENT (6) -/* WLAN P2P user events */ -#define SL_WLAN_P2P_DEV_FOUND_EVENT (7) -#define SL_WLAN_P2P_NEG_REQ_RECEIVED_EVENT (8) -#define SL_WLAN_CONNECTION_FAILED_EVENT (9) -/* SL_EVENT_CLASS_DEVICE user events */ -#define SL_DEVICE_FATAL_ERROR_EVENT (1) -/* SL_EVENT_CLASS_BSD user events */ -#define SL_SOCKET_TX_FAILED_EVENT (1) -#define SL_SOCKET_ASYNC_EVENT (2) -/* SL_EVENT_CLASS_NETAPP user events */ -#define SL_NETAPP_IPV4_IPACQUIRED_EVENT (1) -#define SL_NETAPP_IPV6_IPACQUIRED_EVENT (2) -#define SL_NETAPP_IP_LEASED_EVENT (3) -#define SL_NETAPP_IP_RELEASED_EVENT (4) - -/* Server Events */ -#define SL_NETAPP_HTTPGETTOKENVALUE_EVENT (1) -#define SL_NETAPP_HTTPPOSTTOKENVALUE_EVENT (2) - - -/* - Declare the different event group classifications for sl_DevGet - for getting status indications - */ - -/* Events list to mask/unmask*/ -#define SL_EVENT_CLASS_GLOBAL (0) -#define SL_EVENT_CLASS_DEVICE (1) -#define SL_EVENT_CLASS_WLAN (2) -#define SL_EVENT_CLASS_BSD (3) -#define SL_EVENT_CLASS_NETAPP (4) -#define SL_EVENT_CLASS_NETCFG (5) -#define SL_EVENT_CLASS_FS (6) - - -/****************** DEVICE CLASS status ****************/ -#define EVENT_DROPPED_DEVICE_ASYNC_GENERAL_ERROR (0x00000001L) -#define STATUS_DEVICE_SMART_CONFIG_ACTIVE (0x80000000L) - -/****************** WLAN CLASS status ****************/ -#define EVENT_DROPPED_WLAN_WLANASYNCONNECTEDRESPONSE (0x00000001L) -#define EVENT_DROPPED_WLAN_WLANASYNCDISCONNECTEDRESPONSE (0x00000002L) -#define EVENT_DROPPED_WLAN_STA_CONNECTED (0x00000004L) -#define EVENT_DROPPED_WLAN_STA_DISCONNECTED (0x00000008L) -#define STATUS_WLAN_STA_CONNECTED (0x80000000L) - -/****************** NETAPP CLASS status ****************/ -#define EVENT_DROPPED_NETAPP_IPACQUIRED (0x00000001L) -#define EVENT_DROPPED_NETAPP_IPACQUIRED_V6 (0x00000002L) -#define EVENT_DROPPED_NETAPP_IP_LEASED (0x00000004L) -#define EVENT_DROPPED_NETAPP_IP_RELEASED (0x00000008L) - -/****************** BSD CLASS status ****************/ -#define EVENT_DROPPED_SOCKET_TXFAILEDASYNCRESPONSE (0x00000001L) - -/****************** FS CLASS ****************/ - - - -/*****************************************************************************/ -/* Structure/Enum declarations */ -/*****************************************************************************/ - -#ifdef SL_IF_TYPE_UART -typedef struct -{ - _u32 BaudRate; - _u8 FlowControlEnable; - _u8 CommPort; -} SlUartIfParams_t; -#endif - -typedef struct -{ - _u32 ChipId; - _u32 FwVersion[4]; - _u8 PhyVersion[4]; -}_SlPartialVersion; - -typedef struct -{ - _SlPartialVersion ChipFwAndPhyVersion; - _u32 NwpVersion[4]; - _u16 RomVersion; - _u16 Padding; -}SlVersionFull; - -typedef struct -{ - _i8 status; - SlErrorSender_e sender; -}sl_DeviceReport; - -typedef union -{ - sl_DeviceReport deviceEvent; -} _SlDeviceEventData_u; - -typedef struct -{ - _u32 Event; - _SlDeviceEventData_u EventData; -} SlDeviceEvent_t; - -typedef struct -{ - /* time */ - _u32 sl_tm_sec; - _u32 sl_tm_min; - _u32 sl_tm_hour; - /* date */ - _u32 sl_tm_day; /* 1-31 */ - _u32 sl_tm_mon; /* 1-12 */ - _u32 sl_tm_year; /* YYYY 4 digits */ - _u32 sl_tm_week_day; /* not required */ - _u32 sl_tm_year_day; /* not required */ - _u32 reserved[3]; -}SlDateTime_t; - - -/******************************************************************************/ -/* Type declarations */ -/******************************************************************************/ -typedef void (*P_INIT_CALLBACK)(_u32 Status); - -/*****************************************************************************/ -/* Function prototypes */ -/*****************************************************************************/ - -/*! - \brief Start the SimpleLink device - - This function initialize the communication interface, set the enable pin - of the device, and call to the init complete callback. - - \param[in] pIfHdl Opened Interface Object. In case the interface - must be opened outside the SimpleLink Driver, the - user might give the handler to be used in \n - any access of the communication interface with the - device (UART/SPI). \n - The SimpleLink driver will open an interface port - only if this parameter is null! \n - \param[in] pDevName The name of the device to open. Could be used when - the pIfHdl is null, to transfer information to the - open interface function \n - This pointer could be used to pass additional information to - sl_IfOpen in case it is required (e.g. UART com port name) - \param[in] pInitCallBack Pointer to function that would be called - on completion of the initialization process.\n - If this parameter is NULL the function is - blocked until the device initialization - is completed, otherwise the function returns - immediately. - - \return Returns the current active role (STA/AP/P2P) or an error code: - - ROLE_STA, ROLE_AP, ROLE_P2P in case of success, - otherwise in failure one of the following is return: - - ROLE_STA_ERR (Failure to load MAC/PHY in STA role) - - ROLE_AP_ERR (Failure to load MAC/PHY in AP role) - - ROLE_P2P_ERR (Failure to load MAC/PHY in P2P role) - - - \sa sl_Stop - - \note belongs to \ref basic_api - - \warning This function must be called before any other SimpleLink API is used, or after sl_Stop is called for reinit the device - \par Example: - \code - An example for open interface without callback routine. The interface name and handler are - handled by the sl_IfOpen routine: - - if( sl_Start(NULL, NULL, NULL) < 0 ) - { - LOG("Error opening interface to device\n"); - } - \endcode -*/ -#if _SL_INCLUDE_FUNC(sl_Start) -_i16 sl_Start(const void* pIfHdl, _i8* pDevName, const P_INIT_CALLBACK pInitCallBack); -#endif - -/*! - \brief Stop the SimpleLink device - - This function clears the enable pin of the device, closes the communication \n - interface and invokes the stop complete callback - - \param[in] timeout Stop timeout in msec. Should be used to give the device time to finish \n - any transmission/reception that is not completed when the function was called. \n - Additional options: - - 0 Enter to hibernate immediately \n - - 0xFFFF Host waits for device's response before \n - hibernating, without timeout protection \n - - 0 < Timeout[msec] < 0xFFFF Host waits for device's response before \n - hibernating, with a defined timeout protection \n - This timeout defines the max time to wait. The NWP \n - response can be sent earlier than this timeout. - - \return On success, zero is returned. On error, -1 is returned - - \sa sl_Start - - \note This API will shutdown the device and invoke the "i/f close" function regardless \n - if it was opened implicitly or explicitly. \n - It is up to the platform interface library to properly handle interface close \n - routine \n - belongs to \ref basic_api \n - \warning -*/ -#if _SL_INCLUDE_FUNC(sl_Stop) -_i16 sl_Stop(_u16 timeout); -#endif - - -/*! - \brief Internal function for setting device configurations - - \return On success, zero is returned. On error, -1 is - returned - - \param[in] DeviceSetId configuration id - \param[in] Option configurations option - \param[in] ConfigLen configurations len - \param[in] pValues configurations values - - \sa - \note - \warning - \par Examples: - \code - Setting device time and date example: - - SlDateTime_t dateTime= {0}; - dateTime.sl_tm_day = (_u32)23; // Day of month (DD format) range 1-13 - dateTime.sl_tm_mon = (_u32)6; // Month (MM format) in the range of 1-12 - dateTime.sl_tm_year = (_u32)2014; // Year (YYYY format) - dateTime.sl_tm_hour = (_u32)17; // Hours in the range of 0-23 - dateTime.sl_tm_min = (_u32)55; // Minutes in the range of 0-59 - dateTime.sl_tm_sec = (_u32)22; // Seconds in the range of 0-59 - sl_DevSet(SL_DEVICE_GENERAL_CONFIGURATION, - SL_DEVICE_GENERAL_CONFIGURATION_DATE_TIME, - sizeof(SlDateTime_t), - (_u8 *)(&dateTime)); - - \endcode -*/ -#if _SL_INCLUDE_FUNC(sl_DevSet) -_i32 sl_DevSet(_u8 DeviceSetId ,_u8 Option,_u8 ConfigLen, _u8 *pValues); -#endif - -/*! - \brief Internal function for getting device configurations - \return On success, zero is returned. On error, -1 is - returned - \param[in] DeviceGetId configuration id - example SL_DEVICE_STATUS - \param[out] pOption Get configurations option, example for get status options - - SL_EVENT_CLASS_GLOBAL - - SL_EVENT_CLASS_DEVICE - - SL_EVENT_CLASS_WLAN - - SL_EVENT_CLASS_BSD - - SL_EVENT_CLASS_NETAPP - - SL_EVENT_CLASS_NETCFG - - SL_EVENT_CLASS_FS - \param[out] pConfigLen The length of the allocated memory as input, when the - function complete, the value of this parameter would be - the len that actually read from the device.\n - If the device return length that is longer from the input - value, the function will cut the end of the returned structure - and will return SL_ESMALLBUF - \param[out] pValues Get configurations values - \sa - \note - \warning - \par Examples: - \code - Example for getting WLAN class status: - _u32 statusWlan; - _u8 pConfigOpt; - _u8 pConfigLen; - pConfigOpt = SL_EVENT_CLASS_WLAN; - sl_DevGet(SL_DEVICE_STATUS,&pConfigOpt,&pConfigLen,(_u8 *)(&statusWlan)); - Example for getting version: - SlVersionFull ver; - pConfigOpt = SL_DEVICE_GENERAL_VERSION; - sl_DevGet(SL_DEVICE_GENERAL_CONFIGURATION,&pConfigOpt,&pConfigLen,(_u8 *)(&ver)); - printf("CHIP %d\nMAC 31.%d.%d.%d.%d\nPHY %d.%d.%d.%d\nNWP %d.%d.%d.%d\nROM %d\nHOST %d.%d.%d.%d\n", - ver.ChipFwAndPhyVersion.ChipId, - ver.ChipFwAndPhyVersion.FwVersion[0],ver.ChipFwAndPhyVersion.FwVersion[1], - ver.ChipFwAndPhyVersion.FwVersion[2],ver.ChipFwAndPhyVersion.FwVersion[3], - ver.ChipFwAndPhyVersion.PhyVersion[0],ver.ChipFwAndPhyVersion.PhyVersion[1], - ver.ChipFwAndPhyVersion.PhyVersion[2],ver.ChipFwAndPhyVersion.PhyVersion[3], - ver.NwpVersion[0],ver.NwpVersion[1],ver.NwpVersion[2],ver.NwpVersion[3], - ver.RomVersion, - SL_MAJOR_VERSION_NUM,SL_MINOR_VERSION_NUM,SL_VERSION_NUM,SL_SUB_VERSION_NUM); - - \endcode - \code - Getting Device time and date example: - - SlDateTime_t dateTime = {0}; - _i8 configLen = sizeof(SlDateTime_t); - _i8 configOpt = SL_DEVICE_GENERAL_CONFIGURATION_DATE_TIME; - sl_DevGet(SL_DEVICE_GENERAL_CONFIGURATION,&configOpt, &configLen,(_u8 *)(&dateTime)); - - printf("Day %d,Mon %d,Year %d,Hour %,Min %d,Sec %d\n",dateTime.sl_tm_day,dateTime.sl_tm_mon,dateTime.sl_tm_year - dateTime.sl_tm_hour,dateTime.sl_tm_min,dateTime.sl_tm_sec); - \endcode -*/ -#if _SL_INCLUDE_FUNC(sl_DevGet) -_i32 sl_DevGet(_u8 DeviceGetId, _u8 *pOption,_u8 *pConfigLen, _u8 *pValues); -#endif - - -/*! - \brief Set asynchronous event mask - - Mask asynchronous events from the device. Masked events do not - generate asynchronous messages from the device. - By default - all events are active - - \param[in] EventClass The classification groups that the - mask is referred to. Need to be one of - the following: - - SL_EVENT_CLASS_GLOBAL - - SL_EVENT_CLASS_DEVICE - - SL_EVENT_CLASS_WLAN - - SL_EVENT_CLASS_BSD - - SL_EVENT_CLASS_NETAPP - - SL_EVENT_CLASS_NETCFG - - SL_EVENT_CLASS_FS - - - \param[in] Mask Event Mask bitmap. Valid mask are (per group): - - SL_EVENT_CLASS_WLAN user events - - SL_WLAN_CONNECT_EVENT - - SL_WLAN_DISCONNECT_EVENT - - SL_EVENT_CLASS_DEVICE user events - - SL_DEVICE_FATAL_ERROR_EVENT - - SL_EVENT_CLASS_BSD user events - - SL_SOCKET_TX_FAILED_EVENT - - SL_SOCKET_ASYNC_EVENT - - SL_EVENT_CLASS_NETAPP user events - - SL_NETAPP_IPV4_IPACQUIRED_EVENT - - SL_NETAPP_IPV6_IPACQUIRED_EVENT - - \return On success, zero is returned. On error, -1 is returned - - \sa sl_EventMaskGet - - \note belongs to \ref ext_api - - \warning - \par Example: - \code - - An example of masking connection/disconnection async events from WLAN class: - sl_EventMaskSet(SL_EVENT_CLASS_WLAN, (SL_WLAN_CONNECT_EVENT | SL_WLAN_DISCONNECT_EVENT) ); - - \endcode -*/ -#if _SL_INCLUDE_FUNC(sl_EventMaskSet) -_i16 sl_EventMaskSet(_u8 EventClass , _u32 Mask); -#endif - -/*! - \brief Get current event mask of the device - - return the events bit mask from the device. In case that event is - masked, the device is not sending this event. - - \param[in] EventClass The classification groups that the - mask is referred to. Need to be one of - the following: - - SL_EVENT_CLASS_GLOBAL - - SL_EVENT_CLASS_DEVICE - - SL_EVENT_CLASS_WLAN - - SL_EVENT_CLASS_BSD - - SL_EVENT_CLASS_NETAPP - - SL_EVENT_CLASS_NETCFG - - SL_EVENT_CLASS_FS - - \param[out] pMask Pointer to Mask bitmap where the - value should be stored. Bitmasks are the same as in \ref sl_EventMaskSet - - \return On success, zero is returned. On error, -1 is returned - - \sa sl_EventMaskSet - - \note belongs to \ref ext_api - - \warning - \par Example: - \code - - An example of getting an event mask for WLAN class - _u32 maskWlan; - sl_StatusGet(SL_EVENT_CLASS_WLAN,&maskWlan); - - \endcode -*/ -#if _SL_INCLUDE_FUNC(sl_EventMaskGet) -_i16 sl_EventMaskGet(_u8 EventClass, _u32 *pMask); -#endif - - -/*! - \brief the simple link task entry - - \Param - This function must be called from the main loop or from dedicated thread in - the following cases: - - Non-Os Platform - should be called from the mail loop - - Multi Threaded Platform when the user does not implement the external spawn functions - - should be called from dedicated thread allocated to the simplelink driver. - In this mode the function never return. - - \return None - - \sa sl_Stop - - \note belongs to \ref basic_api - - \warning This function must be called from a thread that is start running before - any call to other simple link API -*/ -#if _SL_INCLUDE_FUNC(sl_Task) -void sl_Task(void); -#endif - - -/*! - \brief Setting the internal uart mode - - \param[in] pUartParams Pointer to the uart configuration parameter set: - baudrate - up to 711 Kbps - flow control - enable/disable - comm port - the comm port number - - \return On success zero is returned, otherwise - Failed. - - \sa sl_Stop - - \note belongs to \ref basic_api - - \warning This function must consider the host uart capability -*/ -#ifdef SL_IF_TYPE_UART -#if _SL_INCLUDE_FUNC(sl_UartSetMode) -_i16 sl_UartSetMode(const SlUartIfParams_t* pUartParams); -#endif -#endif - -/*! - - Close the Doxygen group. - @} - - */ - - -#ifdef __cplusplus -} -#endif /* __cplusplus */ - -#endif /* __DEVICE_H__ */ - - |