diff options
| author | Damien George | 2016-09-19 13:00:15 +1000 |
|---|---|---|
| committer | Damien George | 2016-09-19 13:00:15 +1000 |
| commit | 4874bde10428302eac848b3130e5076e685c7774 (patch) | |
| tree | 98126a3553896dbad2d6eca217ba399fbca0544f /stmhal | |
| parent | 8dd5960ac0853ca2a73dd394511f80f3dd3d38cb (diff) | |
stmhal/boards: For OLIMEX_E407, enable UART1 and fix I2C1 mapping.
UART1 can be used even if the switch is enabled. The schematics for this
board make I2C1 available on PB8/PB9, even though it can also be mapped
to PB6/PB7.
See #2396 and #2427.
Diffstat (limited to 'stmhal')
| -rw-r--r-- | stmhal/boards/OLIMEX_E407/mpconfigboard.h | 6 |
1 files changed, 2 insertions, 4 deletions
diff --git a/stmhal/boards/OLIMEX_E407/mpconfigboard.h b/stmhal/boards/OLIMEX_E407/mpconfigboard.h index 4d1f7ff83..c9241fe63 100644 --- a/stmhal/boards/OLIMEX_E407/mpconfigboard.h +++ b/stmhal/boards/OLIMEX_E407/mpconfigboard.h @@ -23,10 +23,8 @@ #define MICROPY_HW_CLK_PLLQ (7) // UART config -#if MICROPY_HW_HAS_SWITCH == 0 #define MICROPY_HW_UART1_PORT (GPIOB) #define MICROPY_HW_UART1_PINS (GPIO_PIN_6 | GPIO_PIN_7) -#endif #define MICROPY_HW_UART2_PORT (GPIOA) #define MICROPY_HW_UART2_PINS (GPIO_PIN_2 | GPIO_PIN_3) @@ -50,8 +48,8 @@ #define MICROPY_HW_UART6_PINS (GPIO_PIN_6 | GPIO_PIN_7) // I2C busses -#define MICROPY_HW_I2C1_SCL (pin_B6) -#define MICROPY_HW_I2C1_SDA (pin_B7) +#define MICROPY_HW_I2C1_SCL (pin_B8) +#define MICROPY_HW_I2C1_SDA (pin_B9) #define MICROPY_HW_I2C2_SCL (pin_B10) #define MICROPY_HW_I2C2_SDA (pin_B11) |