stm32/boards: Rework all stm32??xx_hal_conf.h files to use common code.

This eliminates a lot of duplicated code in these header files.

1 files changed, 14 insertions, 308 deletions

diff --git a/ports/stm32/boards/NUCLEO_F091RC/stm32f0xx_hal_conf.h b/ports/stm32/boards/NUCLEO_F091RC/stm32f0xx_hal_conf.h
index 53ea047cb..d5b2c4f7a 100644
--- a/ports/stm32/boards/NUCLEO_F091RC/stm32f0xx_hal_conf.h
+++ b/ports/stm32/boards/NUCLEO_F091RC/stm32f0xx_hal_conf.h
@@ -1,312 +1,18 @@
-/**
-  ******************************************************************************
-  * @file    stm32f0xx_hal_conf_template.h
-  * @author  MCD Application Team
-  * @brief   HAL configuration template file.
-  *          This file should be copied to the application folder and renamed
-  *          to stm32f0xx_hal_conf.h.
-  ******************************************************************************
-  * @attention
-  *
-  * <h2><center>&copy; COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
-  *
-  * Redistribution and use in source and binary forms, with or without modification,
-  * are permitted provided that the following conditions are met:
-  *   1. Redistributions of source code must retain the above copyright notice,
-  *      this list of conditions and the following disclaimer.
-  *   2. Redistributions in binary form must reproduce the above copyright notice,
-  *      this list of conditions and the following disclaimer in the documentation
-  *      and/or other materials provided with the distribution.
-  *   3. Neither the name of STMicroelectronics nor the names of its contributors
-  *      may be used to endorse or promote products derived from this software
-  *      without specific prior written permission.
-  *
-  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
-  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
-  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
-  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
-  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
-  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
-  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-  *
-  ******************************************************************************
-  */
+/* This file is part of the MicroPython project, http://micropython.org/
+ * The MIT License (MIT)
+ * Copyright (c) 2019 Damien P. George
+ */
+#ifndef MICROPY_INCLUDED_STM32F0XX_HAL_CONF_H
+#define MICROPY_INCLUDED_STM32F0XX_HAL_CONF_H
 
-/* Define to prevent recursive inclusion -------------------------------------*/
-#ifndef __STM32F0xx_HAL_CONF_H
-#define __STM32F0xx_HAL_CONF_H
+#include "boards/stm32f0xx_hal_conf_base.h"
 
-#ifdef __cplusplus
- extern "C" {
-#endif
+// Oscillator values in Hz
+#define HSE_VALUE (8000000)
+#define LSE_VALUE (32768)
 
-/* Exported types ------------------------------------------------------------*/
-/* Exported constants --------------------------------------------------------*/
+// Oscillator timeouts in ms
+#define HSE_STARTUP_TIMEOUT (100)
+#define LSE_STARTUP_TIMEOUT (5000)
 
-/* ########################## Module Selection ############################## */
-/**
-  * @brief This is the list of modules to be used in the HAL driver
-  */
-#define HAL_MODULE_ENABLED
-#define HAL_ADC_MODULE_ENABLED
-#define HAL_CAN_MODULE_ENABLED
-#define HAL_CEC_MODULE_ENABLED
-#define HAL_COMP_MODULE_ENABLED
-#define HAL_CORTEX_MODULE_ENABLED
-#define HAL_CRC_MODULE_ENABLED
-#define HAL_DAC_MODULE_ENABLED
-#define HAL_DMA_MODULE_ENABLED
-#define HAL_FLASH_MODULE_ENABLED
-#define HAL_GPIO_MODULE_ENABLED
-#define HAL_I2C_MODULE_ENABLED
-#define HAL_I2S_MODULE_ENABLED
-#define HAL_IRDA_MODULE_ENABLED
-#define HAL_IWDG_MODULE_ENABLED
-#define HAL_PCD_MODULE_ENABLED
-#define HAL_PWR_MODULE_ENABLED
-#define HAL_RCC_MODULE_ENABLED
-#define HAL_RTC_MODULE_ENABLED
-#define HAL_SMARTCARD_MODULE_ENABLED
-#define HAL_SMBUS_MODULE_ENABLED
-#define HAL_SPI_MODULE_ENABLED
-#define HAL_TIM_MODULE_ENABLED
-#define HAL_TSC_MODULE_ENABLED
-#define HAL_UART_MODULE_ENABLED
-#define HAL_USART_MODULE_ENABLED
-#define HAL_WWDG_MODULE_ENABLED
-
-/* ######################### Oscillator Values adaptation ################### */
-/**
-  * @brief Adjust the value of External High Speed oscillator (HSE) used in your application.
-  *        This value is used by the RCC HAL module to compute the system frequency
-  *        (when HSE is used as system clock source, directly or through the PLL).
-  */
-#if !defined  (HSE_VALUE)
-  #define HSE_VALUE            ((uint32_t)8000000)  /*!< Value of the External oscillator in Hz */
-#endif /* HSE_VALUE */
-
-/**
-  * @brief In the following line adjust the External High Speed oscillator (HSE) Startup
-  *        Timeout value
-  */
-#if !defined  (HSE_STARTUP_TIMEOUT)
-  #define HSE_STARTUP_TIMEOUT  100U      /*!< Time out for HSE start up, in ms */
-#endif /* HSE_STARTUP_TIMEOUT */
-
-/**
-  * @brief Internal High Speed oscillator (HSI) value.
-  *        This value is used by the RCC HAL module to compute the system frequency
-  *        (when HSI is used as system clock source, directly or through the PLL).
-  */
-#if !defined  (HSI_VALUE)
-  #define HSI_VALUE            8000000U  /*!< Value of the Internal oscillator in Hz*/
-#endif /* HSI_VALUE */
-
-/**
-  * @brief In the following line adjust the Internal High Speed oscillator (HSI) Startup
-  *        Timeout value
-  */
-#if !defined  (HSI_STARTUP_TIMEOUT)
-  #define HSI_STARTUP_TIMEOUT  5000U     /*!< Time out for HSI start up */
-#endif /* HSI_STARTUP_TIMEOUT */
-
-/**
-  * @brief Internal High Speed oscillator for ADC (HSI14) value.
-  */
-#if !defined  (HSI14_VALUE)
-  #define HSI14_VALUE          14000000U /*!< Value of the Internal High Speed oscillator for ADC in Hz.
-                                             The real value may vary depending on the variations
-                                             in voltage and temperature.  */
-#endif /* HSI14_VALUE */
-
-/**
-  * @brief Internal High Speed oscillator for USB (HSI48) value.
-  */
-#if !defined  (HSI48_VALUE)
-  #define HSI48_VALUE          48000000U /*!< Value of the Internal High Speed oscillator for USB in Hz.
-                                             The real value may vary depending on the variations
-                                             in voltage and temperature.  */
-#endif /* HSI48_VALUE */
-
-/**
-  * @brief Internal Low Speed oscillator (LSI) value.
-  */
-#if !defined  (LSI_VALUE)
-  #define LSI_VALUE            40000U
-#endif /* LSI_VALUE */                   /*!< Value of the Internal Low Speed oscillator in Hz
-                                             The real value may vary depending on the variations
-                                             in voltage and temperature.  */
-/**
-  * @brief External Low Speed oscillator (LSE) value.
-  */
-#if !defined  (LSE_VALUE)
-  #define LSE_VALUE            32768U    /*!< Value of the External Low Speed oscillator in Hz */
-#endif /* LSE_VALUE */
-
-/**
-  * @brief Time out for LSE start up value in ms.
-  */
-#if !defined  (LSE_STARTUP_TIMEOUT)
-  #define LSE_STARTUP_TIMEOUT  5000U     /*!< Time out for LSE start up, in ms */
-#endif /* LSE_STARTUP_TIMEOUT */
-
-
-/* Tip: To avoid modifying this file each time you need to use different HSE,
-   ===  you can define the HSE value in your toolchain compiler preprocessor. */
-
-/* ########################### System Configuration ######################### */
-/**
-  * @brief This is the HAL system configuration section
-  */
-#define  VDD_VALUE                    3300U  /*!< Value of VDD in mv */
-#define  TICK_INT_PRIORITY            ((uint32_t)0x00) /*!< tick interrupt priority */
-#define  USE_RTOS                     0U
-#define  PREFETCH_ENABLE              1U
-#define  INSTRUCTION_CACHE_ENABLE     0U
-#define  DATA_CACHE_ENABLE            0U
-#define  USE_SPI_CRC                  1U
-
-/* ########################## Assert Selection ############################## */
-/**
-  * @brief Uncomment the line below to expanse the "assert_param" macro in the
-  *        HAL drivers code
-  */
-/*#define USE_FULL_ASSERT    1*/
-
-/* Includes ------------------------------------------------------------------*/
-/**
-  * @brief Include module's header file
-  */
-
-#ifdef HAL_RCC_MODULE_ENABLED
- #include "stm32f0xx_hal_rcc.h"
-#endif /* HAL_RCC_MODULE_ENABLED */
-
-#ifdef HAL_GPIO_MODULE_ENABLED
- #include "stm32f0xx_hal_gpio.h"
-#endif /* HAL_GPIO_MODULE_ENABLED */
-
-#ifdef HAL_DMA_MODULE_ENABLED
-  #include "stm32f0xx_hal_dma.h"
-#endif /* HAL_DMA_MODULE_ENABLED */
-
-#ifdef HAL_CORTEX_MODULE_ENABLED
- #include "stm32f0xx_hal_cortex.h"
-#endif /* HAL_CORTEX_MODULE_ENABLED */
-
-#ifdef HAL_ADC_MODULE_ENABLED
- #include "stm32f0xx_hal_adc.h"
-#endif /* HAL_ADC_MODULE_ENABLED */
-
-#ifdef HAL_CAN_MODULE_ENABLED
- #include "stm32f0xx_hal_can.h"
-#endif /* HAL_CAN_MODULE_ENABLED */
-
-#ifdef HAL_CEC_MODULE_ENABLED
- #include "stm32f0xx_hal_cec.h"
-#endif /* HAL_CEC_MODULE_ENABLED */
-
-#ifdef HAL_COMP_MODULE_ENABLED
- #include "stm32f0xx_hal_comp.h"
-#endif /* HAL_COMP_MODULE_ENABLED */
-
-#ifdef HAL_CRC_MODULE_ENABLED
- #include "stm32f0xx_hal_crc.h"
-#endif /* HAL_CRC_MODULE_ENABLED */
-
-#ifdef HAL_DAC_MODULE_ENABLED
- #include "stm32f0xx_hal_dac.h"
-#endif /* HAL_DAC_MODULE_ENABLED */
-
-#ifdef HAL_FLASH_MODULE_ENABLED
- #include "stm32f0xx_hal_flash.h"
-#endif /* HAL_FLASH_MODULE_ENABLED */
-
-#ifdef HAL_I2C_MODULE_ENABLED
- #include "stm32f0xx_hal_i2c.h"
-#endif /* HAL_I2C_MODULE_ENABLED */
-
-#ifdef HAL_I2S_MODULE_ENABLED
- #include "stm32f0xx_hal_i2s.h"
-#endif /* HAL_I2S_MODULE_ENABLED */
-
-#ifdef HAL_IRDA_MODULE_ENABLED
- #include "stm32f0xx_hal_irda.h"
-#endif /* HAL_IRDA_MODULE_ENABLED */
-
-#ifdef HAL_IWDG_MODULE_ENABLED
- #include "stm32f0xx_hal_iwdg.h"
-#endif /* HAL_IWDG_MODULE_ENABLED */
-
-#ifdef HAL_PCD_MODULE_ENABLED
- #include "stm32f0xx_hal_pcd.h"
-#endif /* HAL_PCD_MODULE_ENABLED */
-
-#ifdef HAL_PWR_MODULE_ENABLED
- #include "stm32f0xx_hal_pwr.h"
-#endif /* HAL_PWR_MODULE_ENABLED */
-
-#ifdef HAL_RTC_MODULE_ENABLED
- #include "stm32f0xx_hal_rtc.h"
-#endif /* HAL_RTC_MODULE_ENABLED */
-
-#ifdef HAL_SMARTCARD_MODULE_ENABLED
- #include "stm32f0xx_hal_smartcard.h"
-#endif /* HAL_SMARTCARD_MODULE_ENABLED */
-
-#ifdef HAL_SMBUS_MODULE_ENABLED
- #include "stm32f0xx_hal_smbus.h"
-#endif /* HAL_SMBUS_MODULE_ENABLED */
-
-#ifdef HAL_SPI_MODULE_ENABLED
- #include "stm32f0xx_hal_spi.h"
-#endif /* HAL_SPI_MODULE_ENABLED */
-
-#ifdef HAL_TIM_MODULE_ENABLED
- #include "stm32f0xx_hal_tim.h"
-#endif /* HAL_TIM_MODULE_ENABLED */
-
-#ifdef HAL_TSC_MODULE_ENABLED
- #include "stm32f0xx_hal_tsc.h"
-#endif /* HAL_TSC_MODULE_ENABLED */
-
-#ifdef HAL_UART_MODULE_ENABLED
- #include "stm32f0xx_hal_uart.h"
-#endif /* HAL_UART_MODULE_ENABLED */
-
-#ifdef HAL_USART_MODULE_ENABLED
- #include "stm32f0xx_hal_usart.h"
-#endif /* HAL_USART_MODULE_ENABLED */
-
-#ifdef HAL_WWDG_MODULE_ENABLED
- #include "stm32f0xx_hal_wwdg.h"
-#endif /* HAL_WWDG_MODULE_ENABLED */
-
-/* Exported macro ------------------------------------------------------------*/
-#ifdef  USE_FULL_ASSERT
-/**
-  * @brief  The assert_param macro is used for function's parameters check.
-  * @param  expr: If expr is false, it calls assert_failed function
-  *         which reports the name of the source file and the source
-  *         line number of the call that failed.
-  *         If expr is true, it returns no value.
-  * @retval None
-  */
-  #define assert_param(expr) ((expr) ? (void)0U : assert_failed((char *)__FILE__, __LINE__))
-/* Exported functions ------------------------------------------------------- */
-  void assert_failed(char* file, uint32_t line);
-#else
-  #define assert_param(expr) ((void)0U)
-#endif /* USE_FULL_ASSERT */
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif /* __STM32F0xx_HAL_CONF_H */
-
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
+#endif // MICROPY_INCLUDED_STM32F0XX_HAL_CONF_H