all: Reformat C and Python source code with tools/codeformat.py.

This is run with uncrustify 0.70.1, and black 19.10b0.

2 files changed, 19 insertions, 19 deletions

diff --git a/examples/SDdatalogger/boot.py b/examples/SDdatalogger/boot.py
index 4ac94bbaa..bc42cef2e 100644
--- a/examples/SDdatalogger/boot.py
+++ b/examples/SDdatalogger/boot.py
@@ -8,18 +8,18 @@
 
 import pyb
 
-pyb.LED(3).on()                 # indicate we are waiting for switch press
-pyb.delay(2000)                 # wait for user to maybe press the switch
-switch_value = pyb.Switch()()   # sample the switch at end of delay
-pyb.LED(3).off()                # indicate that we finished waiting for the switch
+pyb.LED(3).on()  # indicate we are waiting for switch press
+pyb.delay(2000)  # wait for user to maybe press the switch
+switch_value = pyb.Switch()()  # sample the switch at end of delay
+pyb.LED(3).off()  # indicate that we finished waiting for the switch
 
-pyb.LED(4).on()                 # indicate that we are selecting the mode
+pyb.LED(4).on()  # indicate that we are selecting the mode
 
 if switch_value:
-    pyb.usb_mode('VCP+MSC')
-    pyb.main('cardreader.py')           # if switch was pressed, run this
+    pyb.usb_mode("VCP+MSC")
+    pyb.main("cardreader.py")  # if switch was pressed, run this
 else:
-    pyb.usb_mode('VCP+HID')
-    pyb.main('datalogger.py')           # if switch wasn't pressed, run this
+    pyb.usb_mode("VCP+HID")
+    pyb.main("datalogger.py")  # if switch wasn't pressed, run this
 
-pyb.LED(4).off()                # indicate that we finished selecting the mode
+pyb.LED(4).off()  # indicate that we finished selecting the mode
diff --git a/examples/SDdatalogger/datalogger.py b/examples/SDdatalogger/datalogger.py
index 0690c20bb..3d6f98b38 100644
--- a/examples/SDdatalogger/datalogger.py
+++ b/examples/SDdatalogger/datalogger.py
@@ -17,17 +17,17 @@ while True:
 
     # start if switch is pressed
     if switch():
-        pyb.delay(200)                      # delay avoids detection of multiple presses
-        blue.on()                           # blue LED indicates file open
-        log = open('/sd/log.csv', 'w')       # open file on SD (SD: '/sd/', flash: '/flash/)
+        pyb.delay(200)  # delay avoids detection of multiple presses
+        blue.on()  # blue LED indicates file open
+        log = open("/sd/log.csv", "w")  # open file on SD (SD: '/sd/', flash: '/flash/)
 
         # until switch is pressed again
         while not switch():
-            t = pyb.millis()                            # get time
-            x, y, z = accel.filtered_xyz()              # get acceleration data
-            log.write('{},{},{},{}\n'.format(t,x,y,z))  # write data to file
+            t = pyb.millis()  # get time
+            x, y, z = accel.filtered_xyz()  # get acceleration data
+            log.write("{},{},{},{}\n".format(t, x, y, z))  # write data to file
 
         # end after switch is pressed again
-        log.close()                         # close file
-        blue.off()                          # blue LED indicates file closed
-        pyb.delay(200)                      # delay avoids detection of multiple presses
+        log.close()  # close file
+        blue.off()  # blue LED indicates file closed
+        pyb.delay(200)  # delay avoids detection of multiple presses