cc3200: Add alternate functions list to Pin object.

Also remove pin.high() and pin.low() methods.

1 files changed, 74 insertions, 9 deletions

diff --git a/cc3200/mods/pybpin.h b/cc3200/mods/pybpin.h
index cefc6e03b..04b80825d 100644
--- a/cc3200/mods/pybpin.h
+++ b/cc3200/mods/pybpin.h
@@ -29,24 +29,90 @@
 #define PYBPIN_H_
 
 enum {
-  PORT_A0 = GPIOA0_BASE,
-  PORT_A1 = GPIOA1_BASE,
-  PORT_A2 = GPIOA2_BASE,
-  PORT_A3 = GPIOA3_BASE
+    PORT_A0 = GPIOA0_BASE,
+    PORT_A1 = GPIOA1_BASE,
+    PORT_A2 = GPIOA2_BASE,
+    PORT_A3 = GPIOA3_BASE,
 };
 
+enum {
+    PIN_FN_UART = 0,
+    PIN_FN_SPI,
+    PIN_FN_I2S,
+    PIN_FN_I2C,
+    PIN_FN_TIM,
+    PIN_FN_SD,
+    PIN_FN_ADC,
+};
+
+enum {
+    PIN_TYPE_UART_TX = 0,
+    PIN_TYPE_UART_RX,
+    PIN_TYPE_UART_RTS,
+    PIN_TYPE_UART_CTS,
+};
+
+enum {
+    PIN_TYPE_SPI_CLK = 0,
+    PIN_TYPE_SPI_MOSI,
+    PIN_TYPE_SPI_MISO,
+    PIN_TYPE_SPI_CS0,
+};
+
+enum {
+    PIN_TYPE_I2S_CLK = 0,
+    PIN_TYPE_I2S_FS,
+    PIN_TYPE_I2S_DAT0,
+    PIN_TYPE_I2S_DAT1,
+};
+
+enum {
+    PIN_TYPE_I2C_SDA = 0,
+    PIN_TYPE_I2C_SCL,
+};
+
+enum {
+    PIN_TYPE_TIM_PWM0 = 0,
+    PIN_TYPE_TIM_PWM1,
+    PIN_TYPE_TIM_CC0,
+    PIN_TYPE_TIM_CC1,
+};
+
+enum {
+    PIN_TYPE_SD_CLK = 0,
+    PIN_TYPE_SD_CMD,
+    PIN_TYPE_SD_DAT0,
+};
+
+enum {
+    PIN_TYPE_ADC_CH0 = -1,
+    PIN_TYPE_ADC_CH1 = -1,
+    PIN_TYPE_ADC_CH2 = -1,
+    PIN_TYPE_ADC_CH3 = -1,
+};
+
+typedef struct {
+  qstr name;
+  uint8_t idx;
+  uint8_t fn;
+  uint8_t unit;
+  uint8_t type;
+} pin_af_t;
+
 typedef struct {
     const mp_obj_base_t base;
     const qstr          name;
     const uint32_t      port;
+    const pin_af_t      *af_list;
     uint16_t            pull;
     const uint8_t       bit;
     const uint8_t       pin_num;
     int8_t              af;
     uint8_t             strength;
-    uint8_t             mode;       // this is now a combination of type and mode
-    int8_t              value;      // -1 means no defined value
-    bool                isused;
+    uint8_t             mode;        // this is now a combination of type and mode
+    uint8_t             num_afs: 6;  // up to 63 AFs
+    uint8_t             value  : 1;
+    uint8_t             used   : 1;
 } pin_obj_t;
 
 extern const mp_obj_type_t pin_type;
@@ -68,7 +134,6 @@ extern const mp_obj_dict_t pin_board_pins_locals_dict;
 void pin_init0(void);
 void pin_config(pin_obj_t *self, int af, uint mode, uint type, int value, uint strength);
 pin_obj_t *pin_find(mp_obj_t user_obj);
-pin_obj_t *pin_find_named_pin(const mp_obj_dict_t *named_pins, mp_obj_t name);
-pin_obj_t *pin_find_pin_by_port_bit (const mp_obj_dict_t *named_pins, uint port, uint bit);
+int8_t pin_find_af_index(const pin_obj_t* pin, uint8_t fn, uint8_t unit, uint8_t type);
 
 #endif  // PYBPIN_H_