ports: Make new ports/ sub-directory and move all ports there.

This is to keep the top-level directory clean, to make it clear what is
core and what is a port, and to allow the repository to grow with new ports
in a sustainable way.

1 files changed, 0 insertions, 234 deletions

diff --git a/cc3200/hal/uart.h b/cc3200/hal/uart.h
deleted file mode 100644
index 503cd2c9e..000000000
--- a/cc3200/hal/uart.h
+++ /dev/null
@@ -1,234 +0,0 @@
-//*****************************************************************************
-//
-//  uart.h
-//
-//  Defines and Macros for the UART.
-//
-//  Copyright (C) 2014 Texas Instruments Incorporated - http://www.ti.com/
-//
-//
-//  Redistribution and use in source and binary forms, with or without
-//  modification, are permitted provided that the following conditions
-//  are met:
-//
-//    Redistributions of source code must retain the above copyright
-//    notice, this list of conditions and the following disclaimer.
-//
-//    Redistributions in binary form must reproduce the above copyright
-//    notice, this list of conditions and the following disclaimer in the
-//    documentation and/or other materials provided with the
-//    distribution.
-//
-//    Neither the name of Texas Instruments Incorporated nor the names of
-//    its contributors may be used to endorse or promote products derived
-//    from this software without specific prior written permission.
-//
-//  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
-//  "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
-//  LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
-//  A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
-//  OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
-//  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
-//  LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
-//  DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
-//  THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-//  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
-//  OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-//
-//*****************************************************************************
-
-#ifndef __UART_H__
-#define __UART_H__
-
-//*****************************************************************************
-//
-// If building with a C++ compiler, make all of the definitions in this header
-// have a C binding.
-//
-//*****************************************************************************
-#ifdef __cplusplus
-extern "C"
-{
-#endif
-
-//*****************************************************************************
-//
-// Values that can be passed to UARTIntEnable, UARTIntDisable, and UARTIntClear
-// as the ulIntFlags parameter, and returned from UARTIntStatus.
-//
-//*****************************************************************************
-#define UART_INT_DMATX          0x20000     // DMA Tx Done interrupt Mask
-#define UART_INT_DMARX          0x10000     // DMA Rx Done interrupt Mask
-#define UART_INT_EOT            0x800       // End of transfer interrupt Mask
-#define UART_INT_OE             0x400       // Overrun Error Interrupt Mask
-#define UART_INT_BE             0x200       // Break Error Interrupt Mask
-#define UART_INT_PE             0x100       // Parity Error Interrupt Mask
-#define UART_INT_FE             0x080       // Framing Error Interrupt Mask
-#define UART_INT_RT             0x040       // Receive Timeout Interrupt Mask
-#define UART_INT_TX             0x020       // Transmit Interrupt Mask
-#define UART_INT_RX             0x010       // Receive Interrupt Mask
-#define UART_INT_CTS            0x002       // CTS Modem Interrupt Mask
-
-
-//*****************************************************************************
-//
-// Values that can be passed to UARTConfigSetExpClk as the ulConfig parameter
-// and returned by UARTConfigGetExpClk in the pulConfig parameter.
-// Additionally, the UART_CONFIG_PAR_* subset can be passed to
-// UARTParityModeSet as the ulParity parameter, and are returned by
-// UARTParityModeGet.
-//
-//*****************************************************************************
-#define UART_CONFIG_WLEN_MASK   0x00000060  // Mask for extracting word length
-#define UART_CONFIG_WLEN_8      0x00000060  // 8 bit data
-#define UART_CONFIG_WLEN_7      0x00000040  // 7 bit data
-#define UART_CONFIG_WLEN_6      0x00000020  // 6 bit data
-#define UART_CONFIG_WLEN_5      0x00000000  // 5 bit data
-#define UART_CONFIG_STOP_MASK   0x00000008  // Mask for extracting stop bits
-#define UART_CONFIG_STOP_ONE    0x00000000  // One stop bit
-#define UART_CONFIG_STOP_TWO    0x00000008  // Two stop bits
-#define UART_CONFIG_PAR_MASK    0x00000086  // Mask for extracting parity
-#define UART_CONFIG_PAR_NONE    0x00000000  // No parity
-#define UART_CONFIG_PAR_EVEN    0x00000006  // Even parity
-#define UART_CONFIG_PAR_ODD     0x00000002  // Odd parity
-#define UART_CONFIG_PAR_ONE     0x00000082  // Parity bit is one
-#define UART_CONFIG_PAR_ZERO    0x00000086  // Parity bit is zero
-
-//*****************************************************************************
-//
-// Values that can be passed to UARTFIFOLevelSet as the ulTxLevel parameter and
-// returned by UARTFIFOLevelGet in the pulTxLevel.
-//
-//*****************************************************************************
-#define UART_FIFO_TX1_8         0x00000000  // Transmit interrupt at 1/8 Full
-#define UART_FIFO_TX2_8         0x00000001  // Transmit interrupt at 1/4 Full
-#define UART_FIFO_TX4_8         0x00000002  // Transmit interrupt at 1/2 Full
-#define UART_FIFO_TX6_8         0x00000003  // Transmit interrupt at 3/4 Full
-#define UART_FIFO_TX7_8         0x00000004  // Transmit interrupt at 7/8 Full
-
-//*****************************************************************************
-//
-// Values that can be passed to UARTFIFOLevelSet as the ulRxLevel parameter and
-// returned by UARTFIFOLevelGet in the pulRxLevel.
-//
-//*****************************************************************************
-#define UART_FIFO_RX1_8         0x00000000  // Receive interrupt at 1/8 Full
-#define UART_FIFO_RX2_8         0x00000008  // Receive interrupt at 1/4 Full
-#define UART_FIFO_RX4_8         0x00000010  // Receive interrupt at 1/2 Full
-#define UART_FIFO_RX6_8         0x00000018  // Receive interrupt at 3/4 Full
-#define UART_FIFO_RX7_8         0x00000020  // Receive interrupt at 7/8 Full
-
-//*****************************************************************************
-//
-// Values that can be passed to UARTDMAEnable() and UARTDMADisable().
-//
-//*****************************************************************************
-#define UART_DMA_ERR_RXSTOP     0x00000004  // Stop DMA receive if UART error
-#define UART_DMA_TX             0x00000002  // Enable DMA for transmit
-#define UART_DMA_RX             0x00000001  // Enable DMA for receive
-
-//*****************************************************************************
-//
-// Values returned from UARTRxErrorGet().
-//
-//*****************************************************************************
-#define UART_RXERROR_OVERRUN    0x00000008
-#define UART_RXERROR_BREAK      0x00000004
-#define UART_RXERROR_PARITY     0x00000002
-#define UART_RXERROR_FRAMING    0x00000001
-
-//*****************************************************************************
-//
-// Values that can be passed to UARTModemControlSet()and UARTModemControlClear()
-// or returned from UARTModemControlGet().
-//
-//*****************************************************************************
-#define UART_OUTPUT_RTS         0x00000800
-
-//*****************************************************************************
-//
-// Values that can be returned from UARTModemStatusGet().
-//
-//*****************************************************************************
-#define UART_INPUT_CTS          0x00000001
-
-//*****************************************************************************
-//
-// Values that can be passed to UARTFlowControl() or returned from
-// UARTFlowControlGet().
-//
-//*****************************************************************************
-#define UART_FLOWCONTROL_TX     0x00008000
-#define UART_FLOWCONTROL_RX     0x00004000
-#define UART_FLOWCONTROL_NONE   0x00000000
-
-//*****************************************************************************
-//
-// Values that can be passed to UARTTxIntModeSet() or returned from
-// UARTTxIntModeGet().
-//
-//*****************************************************************************
-#define UART_TXINT_MODE_FIFO    0x00000000
-#define UART_TXINT_MODE_EOT     0x00000010
-
-
-//*****************************************************************************
-//
-// API Function prototypes
-//
-//*****************************************************************************
-extern void UARTParityModeSet(unsigned long ulBase, unsigned long ulParity);
-extern unsigned long UARTParityModeGet(unsigned long ulBase);
-extern void UARTFIFOLevelSet(unsigned long ulBase, unsigned long ulTxLevel,
-                             unsigned long ulRxLevel);
-extern void UARTFIFOLevelGet(unsigned long ulBase, unsigned long *pulTxLevel,
-                             unsigned long *pulRxLevel);
-extern void UARTConfigSetExpClk(unsigned long ulBase, unsigned long ulUARTClk,
-                                unsigned long ulBaud, unsigned long ulConfig);
-extern void UARTConfigGetExpClk(unsigned long ulBase, unsigned long ulUARTClk,
-                                unsigned long *pulBaud,
-                                unsigned long *pulConfig);
-extern void UARTEnable(unsigned long ulBase);
-extern void UARTDisable(unsigned long ulBase);
-extern void UARTFIFOEnable(unsigned long ulBase);
-extern void UARTFIFODisable(unsigned long ulBase);
-extern tBoolean UARTCharsAvail(unsigned long ulBase);
-extern tBoolean UARTSpaceAvail(unsigned long ulBase);
-extern long UARTCharGetNonBlocking(unsigned long ulBase);
-extern long UARTCharGet(unsigned long ulBase);
-extern tBoolean UARTCharPutNonBlocking(unsigned long ulBase,
-                                       unsigned char ucData);
-extern void UARTCharPut(unsigned long ulBase, unsigned char ucData);
-extern void UARTBreakCtl(unsigned long ulBase, tBoolean bBreakState);
-extern tBoolean UARTBusy(unsigned long ulBase);
-extern void UARTIntRegister(unsigned long ulBase, void(*pfnHandler)(void));
-extern void UARTIntUnregister(unsigned long ulBase);
-extern void UARTIntEnable(unsigned long ulBase, unsigned long ulIntFlags);
-extern void UARTIntDisable(unsigned long ulBase, unsigned long ulIntFlags);
-extern unsigned long UARTIntStatus(unsigned long ulBase, tBoolean bMasked);
-extern void UARTIntClear(unsigned long ulBase, unsigned long ulIntFlags);
-extern void UARTDMAEnable(unsigned long ulBase, unsigned long ulDMAFlags);
-extern void UARTDMADisable(unsigned long ulBase, unsigned long ulDMAFlags);
-extern unsigned long UARTRxErrorGet(unsigned long ulBase);
-extern void UARTRxErrorClear(unsigned long ulBase);
-extern void UARTModemControlSet(unsigned long ulBase,
-                                unsigned long ulControl);
-extern void UARTModemControlClear(unsigned long ulBase,
-                                  unsigned long ulControl);
-extern unsigned long UARTModemControlGet(unsigned long ulBase);
-extern unsigned long UARTModemStatusGet(unsigned long ulBase);
-extern void UARTFlowControlSet(unsigned long ulBase, unsigned long ulMode);
-extern unsigned long UARTFlowControlGet(unsigned long ulBase);
-extern void UARTTxIntModeSet(unsigned long ulBase, unsigned long ulMode);
-extern unsigned long UARTTxIntModeGet(unsigned long ulBase);
-
-//*****************************************************************************
-//
-// Mark the end of the C bindings section for C++ compilers.
-//
-//*****************************************************************************
-#ifdef __cplusplus
-}
-#endif
-
-#endif //  __UART_H__