Cleanup and README

1 files changed, 106 insertions, 0 deletions

diff --git a/src/main.c b/src/main.c
new file mode 100644
index 0000000..b7c84d9
--- /dev/null
+++ b/src/main.c
@@ -0,0 +1,106 @@
+/**
+******************************************************************************
+* @file           : main.c
+* @brief          : Main program body
+******************************************************************************
+* @attention
+*
+* 
+******************************************************************************
+*/
+
+/* Standard library includes */
+#include <stdio.h>
+
+/* Library includes */
+
+/* Project includes */
+#include "main.h"
+
+/**
+ * @brief  The application entry point.
+ * @retval int
+ */
+int main(void)
+{ 
+    /* MCU Configuration */
+
+    /* Reset of all peripherals, Initializes the Flash interface and the Systick. */
+    HAL_Init();
+    /* Configure the system clock */
+    SystemClock_Config();
+
+    while (1) {
+	
+    }
+}
+
+/**
+ * @brief System Clock Configuration
+ * @retval None
+ */
+void SystemClock_Config(void)
+{
+    RCC_OscInitTypeDef RCC_OscInitStruct = {0};
+    RCC_ClkInitTypeDef RCC_ClkInitStruct = {0};
+
+    /** Configure the main internal regulator output voltage 
+     */
+    __HAL_RCC_PWR_CLK_ENABLE();
+    __HAL_PWR_VOLTAGESCALING_CONFIG(PWR_REGULATOR_VOLTAGE_SCALE2);
+    /** Initializes the CPU, AHB and APB busses clocks 
+     */
+    RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSI;
+    RCC_OscInitStruct.HSIState = RCC_HSI_ON;
+    RCC_OscInitStruct.HSICalibrationValue = RCC_HSICALIBRATION_DEFAULT;
+    RCC_OscInitStruct.PLL.PLLState = RCC_PLL_NONE;
+    if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK)
+    {
+	Error_Handler();
+    }
+    /** Initializes the CPU, AHB and APB busses clocks 
+     */
+    RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_HCLK|RCC_CLOCKTYPE_SYSCLK
+	|RCC_CLOCKTYPE_PCLK1|RCC_CLOCKTYPE_PCLK2;
+    RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_HSI;
+    RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1;
+    RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV1;
+    RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV1;
+
+    if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_0) != HAL_OK)
+    {
+	Error_Handler();
+    }
+}
+
+/**
+ * @brief  This function is executed in case of error occurrence.
+ * @retval None
+ */
+void Error_Handler(void)
+{
+    /* USER CODE BEGIN Error_Handler_Debug */
+    /* User can add his own implementation to report the HAL error return state */
+    while (1) {
+	HAL_GPIO_TogglePin(led_GPIO_Port, led_Pin);
+	HAL_Delay(1000);
+    }
+    /* USER CODE END Error_Handler_Debug */
+}
+
+#ifdef  USE_FULL_ASSERT
+/**
+ * @brief  Reports the name of the source file and the source line number
+ *         where the assert_param error has occurred.
+ * @param  file: pointer to the source file name
+ * @param  line: assert_param error line source number
+ * @retval None
+ */
+void assert_failed(uint8_t *file, uint32_t line)
+{ 
+    /* USER CODE BEGIN 6 */
+    /* User can add his own implementation to report the file name and line number,
+       tex: printf("Wrong parameters value: file %s on line %d\r\n", file, line) */
+    /* USER CODE END 6 */
+}
+#endif /* USE_FULL_ASSERT */