| Age | Commit message (Collapse) | Author |
|---|
|
Add headers to a few files which were missing them.
|
|
This means the build system should pass the correct includes and
library bindings to `coqdep`.
We still have some discrepancies we won't be able to solve until
`Loadpath` and `coqdep` are fused [which depends on the dune build.
|
|
|
|
|
|
Since Ltac2 cannot be put under the stdlib logical root (some file names
would clash), we move it to the `user-contrib` directory, to avoid adding
another hardcoded path in `coqinit.ml`, following a suggestion by @ejgallego.
Thanks to @Zimmi48 for the thorough documentation review and the
numerous suggestions.
|
|
|
|
|
|
On a machine for which ocamlopt is available, the make world will now
perform bytecode compilation only in grammar/ (up to the syntax
extension grammar.cma), and then exclusively use ocamlopt.
In particular, make world do not build bin/coqtop.byte.
A separate rule 'make byte' does it, as well as bytecode plugins and
things like dev/printers.cma.
'make install' deals only with the part built by 'make', while a new
rule 'make install-byte' installs the part built by 'make byte'.
IMPORTANT: PLEASE AVOID doing things like 'make -j world byte' or any
parallel mix of native and byte rules. These are known to crash sometimes,
see below. Instead, do rather 'make -j && make -j byte'.
Indeed, apart from marginal compilation speed-up for users not interested
in byte versions, the main reason for this commit is to discourage any
simultaneous use of OCaml native and byte compilers. Indeed, ocamlopt and
ocamlc will both happily destroy and recreate .cmi for .ml files with no .mli,
and in case of parallel build this may happen at the very moment another
ocaml(c|opt) is accessing this .cmi. Until now, this issue has been
handled via nasty hacks (see the former MLWITHOUTMLI and HACKMLI vars in
Makefile.build). But these hacks weren't obvious to extend to ocamlopt
-pack vs. ocamlopt -pack.
coqdep_boot takes a "-dyndep" option to control precisely how a Declare ML
Module influences the .v.d dependency file. Possible values are:
-dyndep opt : regular situation now, depends only on .cmxs
-dyndep byte : no ocamlopt, or compilation forced to bytecode, depends on .cm(o|a)
-dyndep both : earlier behavior, dependency over both .cm(o|a) and .cmxs
-dyndep none : interesting for coqtop with statically linked plugins
-dyndep var : place Makefile variables $(DYNLIB) and $(DYNOBJ) in .v.d
instead of extensions .cm*, so that the choice is made in the rest of the
makefile (see a future commit about coq_makefile)
NB: two extra mli added to avoid building unecessary .cmo during 'make world',
without having to use the ocamldep -native option.
NB: we should state somewhere that coqmktop -top won't work unless
'make byte' was done first
|
|
This reverts commit b2f8f9edd5c1bb0a9c8c4f4b049381b979d3e385, reversing
changes made to da99355b4d6de31aec5a660f7afe100190a8e683.
Hugo asked for more discussion on this topic, and it was not in the roadmap. I
merged it prematurely because I thought there was a consensus. Also, I missed
that it was changing coq_makefile. Sorry about that.
|
|
On a machine for which ocamlopt is available, the make world will now
perform bytecode compilation only in grammar/ (up to the syntax
extension grammar.cma), and then exclusively use ocamlopt.
In particular, make world do not build bin/coqtop.byte.
A separate rule 'make byte' does it, as well as bytecode plugins and
things like dev/printers.cma.
'make install' deals only with the part built by 'make', while a new
rule 'make install-byte' installs the part built by 'make byte'.
IMPORTANT: PLEASE AVOID doing things like 'make -j world byte' or any
parallel mix of native and byte rules. These are known to crash sometimes,
see below. Instead, do rather 'make -j && make -j byte'.
Indeed, apart from marginal compilation speed-up for users not interested
in byte versions, the main reason for this commit is to discourage any
simultaneous use of OCaml native and byte compilers. Indeed, ocamlopt and
ocamlc will both happily destroy and recreate .cmi for .ml files with no .mli,
and in case of parallel build this may happen at the very moment another
ocaml(c|opt) is accessing this .cmi. Until now, this issue has been
handled via nasty hacks (see the former MLWITHOUTMLI and HACKMLI vars in
Makefile.build). But these hacks weren't obvious to extend to ocamlopt
-pack vs. ocamlopt -pack.
coqdep_boot takes a "-dyndep" option to control precisely how a Declare ML
Module influences the .v.d dependency file. Possible values are:
-dyndep opt : regular situation now, depends only on .cmxs
-dyndep byte : no ocamlopt, or compilation forced to bytecode, depends on .cm(o|a)
-dyndep both : earlier behavior, dependency over both .cm(o|a) and .cmxs
-dyndep none : interesting for coqtop with statically linked plugins
-dyndep var : place Makefile variables $(DYNLIB) and $(DYNOBJ) in .v.d
instead of extensions .cm*, so that the choice is made in the rest of the
makefile (see next commit about coq_makedile)
NB: two extra mli added to avoid building unecessary .cmo during 'make world',
without having to use the ocamldep -native option.
NB: we should state somewhere that coqmktop -top won't work unless
'make byte' was done first
|
|
|
|
Like coqc: detect if the current directory was set by options, if not: add
it with empty logical path.
TODO: check if coq_makefile is still correct wrt to this modification, I
think yes, actually it should end being more correct.
|
|
"This function is deprecated: the runtime system is now able to print
uncaught exceptions as precisely as Printexc.catch does. Moreover, calling
Printexc.catch makes it harder to track the location of the exception
using the debugger or the stack backtrace facility. So, do not use
Printexc.catch in new code."
|
|
The quadratic behaviour of list searching probably appears with small
enough samples. With the advent of usable libraries in Coq, and thus many
possible dependencies, better be safe than sorry.
|
|
|
|
-I is (only) the ml one
-I -as is fixed
-Q is understood
-R is not a recursive ml include anymore
$COQENV, user_contrib, ... are not recursively included
coqlib/theories and coqlib/plugins are still recursively included (for now). (This
may deserves an option)
Closes Bug 2910: If there is a "Require a." in a b.v and a a.vo in path but no a.v,
coqdep does not complains about a missing a.v.
|
|
|
|
|
|
git-svn-id: svn+ssh://scm.gforge.inria.fr/svn/coq/trunk@16431 85f007b7-540e-0410-9357-904b9bb8a0f7
|
|
git-svn-id: svn+ssh://scm.gforge.inria.fr/svn/coq/trunk@15715 85f007b7-540e-0410-9357-904b9bb8a0f7
|
|
git-svn-id: svn+ssh://scm.gforge.inria.fr/svn/coq/trunk@13323 85f007b7-540e-0410-9357-904b9bb8a0f7
|
|
- Many of them were broken, some of them after Pierre B's rework
of mli for ocamldoc, but not only (many bad annotation, many files
with no svn property about Id, etc)
- Useless for those of us that work with git-svn (and a fortiori
in a forthcoming git-only setting)
- Even in svn, they seem to be of little interest
git-svn-id: svn+ssh://scm.gforge.inria.fr/svn/coq/trunk@12972 85f007b7-540e-0410-9357-904b9bb8a0f7
|
|
- This way, the Makefile.build gets shorter and simplier, with a few nasty
hacks removed.
- In particular, we stop creating dummy .ml of .ml4 early "to please ocamldep".
Instead, we now use ocamldep -modules, and process its output via coqdep_boot.
This ways, *.cm* of .ml4 are correctly located, even when some .ml files
aren't generated yet.
- There is no risk of editing the .ml of a .ml4 by mistake, since it is by
default in a binary format (cf pr_o.cmo and variable READABLE_ML4).
M-x next-error still open the right .ml4 at the right location.
- mltop.byteml is now mltop.ml, while mltop.optml keeps its name
- .ml of .ml4 are added to .gitignore
git-svn-id: svn+ssh://scm.gforge.inria.fr/svn/coq/trunk@12833 85f007b7-540e-0410-9357-904b9bb8a0f7
|
|
git-svn-id: svn+ssh://scm.gforge.inria.fr/svn/coq/trunk@12018 85f007b7-540e-0410-9357-904b9bb8a0f7
|
|
* generalize the use of .mllib to build all cma, not only in plugins/
* the .mllib in plugins/ now mention Bruno's new _mod.ml files
* lots of .cmo enumerations in Makefile.common are removed, since
they are now in .mllib
* the list of .cmo/.cmi can be retreive via a shell script line,
see for instance rule install-library
* Tolink.core_objs and Tolink.ide now contains ocaml _modules_, not
_files_
* a -I option to coqdep_boot allows to control piority of includes
(some files with the same names in kernel and checker ...)
This is quite a lot of changes, you know who to blame / report to
if something breaks.
... and last but not least I've started playing with ocamlbuild.
The myocamlbuild.ml is far from complete now, but it already allows
to build coqtop.{opt,byte} here. See comments at the top of
myocamlbuild.ml, and don't hesitate to contribute, either for completing
or simplifying it !
git-svn-id: svn+ssh://scm.gforge.inria.fr/svn/coq/trunk@12002 85f007b7-540e-0410-9357-904b9bb8a0f7
|
|
user contribs
git-svn-id: svn+ssh://scm.gforge.inria.fr/svn/coq/trunk@11996 85f007b7-540e-0410-9357-904b9bb8a0f7
|
|
included in coqdep
git-svn-id: svn+ssh://scm.gforge.inria.fr/svn/coq/trunk@11985 85f007b7-540e-0410-9357-904b9bb8a0f7
|
|
build stages
git-svn-id: svn+ssh://scm.gforge.inria.fr/svn/coq/trunk@11984 85f007b7-540e-0410-9357-904b9bb8a0f7
|
