| Age | Commit message (Collapse) | Author |
|---|
|
These modules do actually belong there.
We have to slightly reorganize printers, removing a couple of
duplicated ones in the way.
|
|
|
|
|
|
This is documented in dev/doc/changes.md.
|
|
A few of them will be of help for future cleanups. We have spared the
stuff in `Names` due to bad organization of this module following the
split from `Term`, which really difficult things removing the
constructors.
|
|
We remove sections paths from kernel names. This is a cleanup as most of the times this information was unused. This implies a change in the Kernel API and small user visible changes with regards to tactic qualification. In particular, the removal of "global discharge" implies a large cleanup of code.
Additionally, the change implies that some machinery in `library` and `safe_typing` must now take an `~in_section` parameter, as to provide the information whether a section is open or not.
|
|
|
|
We move the last 3 types to more adequate places.
|
|
Continuing the interface cleanup we place `Constrexpr` in the
internalization module, which is the one that eliminates it.
This slims down `pretyping` considerably, including removing the
`Univdecls` module which existed only due to bad dependency ordering
in the first place. Thanks to @ Skyskimmer we also remove a duplicate
`univ_decl` definition among `Misctypes` and `UState`.
This is mostly a proof of concept yet as it depends on quite a few
patches of the tree. For sure some tweaks will be necessary, but it
should be good for review now.
IMO the tree is now in a state where we can could easy eliminate more
than 10 modules without any impact, IMHO this is a net saving API-wise
and would help people to understand the structure of the code better.
|
|
We remove most of what was deprecated in `Term`. Now, `intf` and
`kernel` are almost deprecation-free, tho I am not very convinced
about the whole `Term -> Constr` renaming but I'm afraid there is no
way back.
Inconsistencies with the constructor policy (see #6440) remain along
the code-base and I'm afraid I don't see a plan to reconcile them.
The `Sorts` deprecation is hard to finalize, opening `Sorts` is not a
good idea as someone added a `List` module inside it.
|
|
|
|
|
|
The patch has three parts:
- Introduction of a configure flag `-bytecode-compiler (yes|no)`
(due to static initialization this is a configure-time option)
- Installing the hooks that register the VM with the pretyper and the
kernel conditionally on the flag.
- Replacing the normalization function in `Redexpr` by compute if the
VM is disabled.
We also rename `Coq_config.no_native_compiler` to `native_compiler`
and `Flags.native_compiler` to `output_native_objects` [see #4607].
|
|
|
|
Reminder of (some of) the reasons for removal:
- Despite the claim in sigma.mli, it does *not* prevent evar
leaks, something like:
fun env evd ->
let (evd',ev) = new_evar env evd in
(evd,ev)
will typecheck even with Sigma-like type annotations (with a proof of
reflexivity)
- The API stayed embryonic. Even typing functions were not ported to
Sigma.
- Some unsafe combinators (Unsafe.tclEVARS) were replaced with slightly
less unsafe ones (e.g. s_enter), but those ones were not marked unsafe
at all (despite still being so).
- There was no good story for higher order functions manipulating evar
maps. Without higher order, one can most of the time get away with
reusing the same name for the updated evar map.
- Most of the code doing complex things with evar maps was using unsafe
casts to sigma. This code should be fixed, but this is an orthogonal
issue.
Of course, this was showing a nice and elegant use of GADTs, but the
cost/benefit ratio in practice did not seem good.
|
|
As per https://github.com/coq/coq/pull/716#issuecomment-305140839
Partially using
```bash
git grep --name-only 'anomaly\s*\(~label:"[^"]*"\s*\)\?\(Pp.\)\?(\(\(Pp.\)\?str\)\?\s*".*[^\.!]")' | xargs sed s'/\(anomaly\s*\(~label:"[^"]*"\s*\)\?\(Pp.\)\?(\(\(Pp.\)\?str\)\?\s*".*\s*[^\.! ]\)\s*")/\1.")/g' -i
```
and
```bash
git grep --name-only ' !"' | xargs sed s'/ !"/!"/g' -i
```
The rest were manually edited by looking at the results of
```bash
git grep anomaly | grep '\.ml' | grep -v 'anomaly\s*\(~label:"[^"]*"\s*\)\?\(Pp\.\)\?(\(\(Pp.\)\?str\)\?\s*".*\(\.\|!\)")' | grep 'anomaly\($\|[^_]\)' | less
```
|
|
Inspired by https://coq.inria.fr/bugs/show_bug.cgi?id=5229 , which
this PR solves, I propose to remove support for non-synchronous
options.
It seems the few uses of `optsync = false` we legacy and shouldn't
have any impact.
Moreover, non synchronous options may create particularly tricky
situations as for instance, they won't be propagated to workers.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Add a boolean for refolding during reduction, and an option
that is off by default in 8.6, to turn refolding on in all reduction
functions, as in 8.5.
|
|
Suggested by @ppedrot
|
|
As noted by @ppedrot, the first is redundant. The patch is basically a renaming.
We didn't make the component optional yet, but this could happen in a
future patch.
|
|
For the moment, there is a Closure module in compiler-libs/ocamloptcomp.cm(x)a
|
|
module)
For the moment, there is an Error module in compilers-lib/ocamlbytecomp.cm(x)a
|
|
|
|
This is a reimplementation of Hugo's PR#117.
We are trying to address the problem that the name of some reduction functions
was not saying what they were doing (e.g. whd_betadeltaiota was doing let-in
reduction). Like PR#117, we are careful that no function changed semantics
without changing the names. Porting existing ML code should be a matter of
renamings a few function calls.
Also, we introduce more precise reduction flags fMATCH, fFIX, fCOFIX
collectively denominated iota.
We renamed the following functions:
Closure.betadeltaiota -> Closure.all
Closure.betadeltaiotanolet -> Closure.allnolet
Reductionops.beta -> Closure.beta
Reductionops.zeta -> Closure.zeta
Reductionops.betaiota -> Closure.betaiota
Reductionops.betaiotazeta -> Closure.betaiotazeta
Reductionops.delta -> Closure.delta
Reductionops.betalet -> Closure.betazeta
Reductionops.betadelta -> Closure.betadeltazeta
Reductionops.betadeltaiota -> Closure.all
Reductionops.betadeltaiotanolet -> Closure.allnolet
Closure.no_red -> Closure.nored
Reductionops.nored -> Closure.nored
Reductionops.nf_betadeltaiota -> Reductionops.nf_all
Reductionops.whd_betadelta -> Reductionops.whd_betadeltazeta
Reductionops.whd_betadeltaiota -> Reductionops.whd_all
Reductionops.whd_betadeltaiota_nolet -> Reductionops.whd_allnolet
Reductionops.whd_betadelta_stack -> Reductionops.whd_betadeltazeta_stack
Reductionops.whd_betadeltaiota_stack -> Reductionops.whd_all_stack
Reductionops.whd_betadeltaiota_nolet_stack -> Reductionops.whd_allnolet_stack
Reductionops.whd_betadelta_state -> Reductionops.whd_betadeltazeta_state
Reductionops.whd_betadeltaiota_state -> Reductionops.whd_all_state
Reductionops.whd_betadeltaiota_nolet_state -> Reductionops.whd_allnolet_state
Reductionops.whd_eta -> Reductionops.shrink_eta
Tacmach.pf_whd_betadeltaiota -> Tacmach.pf_whd_all
Tacmach.New.pf_whd_betadeltaiota -> Tacmach.New.pf_whd_all
And removed the following ones:
Reductionops.whd_betaetalet
Reductionops.whd_betaetalet_stack
Reductionops.whd_betaetalet_state
Reductionops.whd_betadeltaeta_stack
Reductionops.whd_betadeltaeta_state
Reductionops.whd_betadeltaeta
Reductionops.whd_betadeltaiotaeta_stack
Reductionops.whd_betadeltaiotaeta_state
Reductionops.whd_betadeltaiotaeta
They were unused and having some reduction functions perform eta is confusing
as whd_all and nf_all don't do it.
|
|
On the user side, coqtop and coqc take a list of warning names or categories
after -w. No prefix means activate the warning, a "-" prefix means deactivate
it, and "+" means turn the warning into an error. Special categories include
"all", and "default" which contains the warnings enabled by default.
We also provide a vernacular Set Warnings which takes the same flags as argument.
Note that coqc now prints warnings.
The name and category of a warning are printed with the warning itself.
On the developer side, Feedback.msg_warning is still accessible, but the
recommended way to print a warning is in two steps:
1) create it by:
let warn_my_warning =
CWarnings.create ~name:"my-warning" ~category:"my-category"
(fun args -> Pp.strbrk ...)
2) print it by:
warn_my_warning args
|
|
This patch splits pretty printing representation from IO operations.
- `Pp` is kept in charge of the abstract pretty printing representation.
- The `Feedback` module provides interface for doing printing IO.
The patch continues work initiated for 8.5 and has the following effects:
- The following functions in `Pp`: `pp`, `ppnl`, `pperr`, `pperrnl`,
`pperr_flush`, `pp_flush`, `flush_all`, `msg`, `msgnl`, `msgerr`,
`msgerrnl`, `message` are removed. `Feedback.msg_*` functions must be
used instead.
- Feedback provides different backends to handle output, currently,
`stdout`, `emacs` and CoqIDE backends are provided.
- Clients cannot specify flush policy anymore, thus `pp_flush` et al are
gone.
- `Feedback.feedback` takes an `edit_or_state_id` instead of the old
mix.
Lightly tested: Test-suite passes, Proof General and CoqIDE seem to work.
|
|
|
|
|
|
|
|
Note: they do not even seem to have a debugging purpose, so better remove
them before they bitrot.
|
|
|
|
Note that this does not prevent using native_compute, but it will force
on-the-fly recompilation of dependencies whenever it is used.
Precompilation is enabled for the standard library, assuming native
compilation was enabled at configuration time.
If native compilation was disabled at configuration time, native_compute
falls back to vm_compute.
Failure to precompile is a hard error, since it is now explicitly required
by the user.
|
|
Since error messages are ultimately passed to Format, which has its own
buffers for concatenating strings, using concatenation for preparing error
messages just doubles the workload and increases memory pressure.
|
|
actually calling the VM at Qed time.
|
|
|
|
|
|
You can write 'simpl -[plus minus] div2'. Simpl does not use it for now.
|
|
at least when f is an evaluable reference.
|
|
reference" and "simpl pattern" in the code (maybe we should have
merged them instead, but I finally decided to enforce their
difference, even if some compatibility is to be preversed - the idea
is that at some time "simpl reference" would only call a weak-head
simpl (or eventually cbn), leading e.g. to reduce 2+n into S(1+n)
rather than S(S(n)) which could be useful for better using induction
hypotheses.
In the process we also implement the following:
- 'simpl "+"' is accepted to reduce all applicative subterms whose
head symbol is written "+" (in the toplevel scope); idem for
vm_compute and native_compute
- 'simpl reference' works even if reference has maximally inserted
implicit arguments (this solves the "simpl fst" incompatibility)
- compatibility of ltac expressions referring to vm_compute and
native_compute with functor application should now work (i.e.
vm_compute and native_compute are now taken into account in
tacsubst.ml)
- for compatibility, "simpl eq" (assuming no maximal implicit args in
eq) or "simpl @eq" to mean "simpl (eq _ _)" are still allowed.
By the way, is "mul" on nat defined optimally? "3*n" simplifies to
"n+(n+(n+0))". Are there some advantages of this compared to have it
simplified to "n+n+n" (i.e. to "(n+n)+n").
|
