| Age | Commit message (Collapse) | Author |
|---|
|
It is the only place where it starts making sense in the whole codebase. It also
fits nicely there since there are other functions manipulating this type in that
module.
In any case this type does not belong to the kernel.
|
|
sense
Reviewed-by: Zimmi48
|
|
|
|
|
|
Adopting the same format means printing "Ltac foo := ..." and not the
fully qualified name of foo.
|
|
Note: "hyp" was documented in Ltac Notation chapter but "var" was not.
|
|
|
|
|
|
Re-raising inside exception handlers must be done with care in order
to preserve backtraces; even if newer OCaml versions do a better job
in automatically spilling `%reraise` in places that matter, there is
no guarantee for that to happen.
I've done a best-effort pass of places that were re-raising
incorrectly, hopefully I got the logic right.
There is the special case of `Nametab.error_global_not_found` which is
raised many times in response to a `Not_found` error; IMHO this error
should be converted to something more specific, however the scope of
that change would be huge as to do easily...
|
|
|
|
This seems to be a pattern used quite a bit in the wild, it does not hurt
to be a bit more lenient to tolerate this kind of use. Interestingly the
API was already offering a similar generalization in some unrelated places.
We also backtrack on the change in Floats.FloatLemmas since it is an instance
of this phenomenon.
|
|
See #11840 for a motivation. I had to fix Floats.FloatLemmas because
it uses the same name for a notation and a term, and the fact this
unfold was working on this was clearly a bug. I hope nobody relies
on this kind of stuff in the wild.
Fixes #5764: "Cannot coerce ..." should be a runtime error.
Fixes #5159: "Cannot coerce ..." should not be an error.
Fixes #4925: unfold gives error on Admitted.
|
|
Reviewed-by: herbelin
|
|
Useful for guarding calls to `unfold` or `cbv` to ensure that, e.g.,
`Opaque foo` doesn't break some automation which tries to unfold `foo`.
We have some timeouts in the strategy success file. We should not run
into issues, because we are not really testing how long these take. We
could just as well use `Timeout 60` or longer, we just want to make sure
the file dies more quickly rather than taking over 10^100 steps.
Note that this tactic does not play well with `abstract`; I have a
potentially controversial change that fixes this issue.
One of the lines in the doc comes from
https://github.com/coq/coq/pull/12129#issuecomment-619771556
Co-Authored-By: Pierre-Marie Pédrot <pierre-marie.pedrot@irif.fr>
Co-Authored-By: Théo Zimmermann <theo.zimmermann@inria.fr>
Co-Authored-By: Michael Soegtrop <7895506+MSoegtropIMC@users.noreply.github.com>
|
|
Part of the plan of #11840.
|
|
Reviewed-by: ejgallego
Reviewed-by: ppedrot
|
|
Add headers to a few files which were missing them.
|
|
|
|
We also remove trailing whitespace.
Script used:
```bash
for i in `find . -name '*.ml' -or -name '*.mli' -or -name '*.mlg'`; do expand -i "$i" | sponge "$i"; sed -e's/[[:space:]]*$//' -i.bak "$i"; done
```
|
|
Not pretty, but it had to be done some day, as `Globnames` seems to be
on the way out.
I have taken the opportunity to reduce the number of `open` in the
codebase.
The qualified style would indeed allow us to use a bit nicer names
`GlobRef.Inductive` instead of `IndRef`, etc... once we have the
tooling to do large-scale refactoring that could be tried.
|
|
in favor of "simple_intropattern"
Reviewed-by: Zimmi48
Reviewed-by: ppedrot
|
|
|
|
This is to prevent confusion with the terminology used in the grammar
of tactic in the reference manual: "intropattern" in Tactic Notation
and TACTIC EXTEND is actually bound to simple_intropattern and not to
what is called intropattern in the reference manual
After some deprecation phase, "intropattern" could be added back to
mean the "intropattern" of the reference manual.
Note that "simple_intropattern" is actually already available in
"Tactic Notation" with the correct meaning as an entry. Only
"intropattern" is misguiding.
|
|
We also slightly change the semantics of the `compat` syntax modifier to
re-express it in terms of the `deprecated` attribute, and we deprecate
it in favor of the latter.
|
|
|
|
The semantics is obviously that it is an error if not at least one
occurrence is found (natural semantics for rewriting for
example).
|
|
This is a pre-requisite to use automated formatting tools such as
`ocamlformat`, also, there were quite a few places where the comments
had basically no effect, thus it was confusing for the developer.
p.s: Reading some comments was a lot of fun :)
|
|
This provides several advantages to people serializing tactic
scripts. Appearance of the involved constructors is common enough as
to bother to submit this PR.
|
|
|
|
|
|
We do it by passing interning env to ltac interning.
Collecting scopes was already done by side-effect internally to
Constrintern. We expose the side-effect to ltac.
|
|
|
|
We can then avoid passing an empty env.
|
|
In general, `Nametab` is not a module you want to open globally as it
exposes very generic identifiers such as `push` or `global`.
Thus, we remove all global opens and qualify `Nametab` access. The
patch is small and confirms the hypothesis that `Nametab` access
happens in few places thus it doesn't need a global open.
It is also very convenient to be able to use `grep` to see accesses to
the namespace table.
|
|
When deprecating some type alias [due to code refactoring] we forgot
to deprecate the constructors too. Closes #8498.
|
|
We make it possible to deprecate tactics defined by `Ltac`, `Tactic
Notation` or ML.
For the first two variants, we anticipate the syntax of attributes:
`#[deprecated(since = "XX", note = "YY")]`
In ML, the syntax is:
```
let reflexivity_depr =
let open CWarnings in
{ since = "8.5"; note = "Use admit instead." }
TACTIC EXTEND reflexivity DEPRECATED reflexivity_depr
[ "reflexivity" ] -> [ Tactics.intros_reflexivity ]
END
```
A warning is shown at the point where the tactic is used (either
a direct call or when defining another tactic):
Tactic `foo` is deprecated since XX. YY
YY is typically meant to be "Use bar instead.".
|
|
reference was defined as Ident or Qualid, but the qualid type already
permits empty paths. So we had effectively two representations for
unqualified names, that were not seen as equal by eq_reference.
We remove the reference type and replace its uses by qualid.
|
|
We move the last 3 types to more adequate places.
|
|
- move_location to proofs/logic.
- intro_pattern_naming to Namegen.
|
|
The `reference` type contains some ad-hoc locations in its
constructors, but there is no reason not to handle them with the
standard attribute container provided by `CAst.t`.
An orthogonal topic to this commit is whether the `reference` type
should contain a location or not at all.
It seems that many places would become a bit clearer by splitting
`reference` into non-located `reference` and `lreference`, however
some other places become messier so we maintain the current status-quo
for now.
|
|
We continue with the work of #402 and #6745 and update most of the
remaining parts of the AST:
- module declarations
- intro patterns
- top-level sentences
Now, parsed documents should be full annotated by `CAst` nodes.
|
|
|
|
This commit was motivated by true spurious conversions arising in my
`to_constr` debug branch.
The changes here need careful review as the tradeoffs are subtle and
still a lot of clean up remains to be done in `vernac/*`.
We have opted for penalize [minimally] the few users coming from true
`Constr`-land, but I am sure we can tweak code in a much better way.
In particular, it is not clear if internalization should take an
`evar_map` even in the cases where it is not triggered, see the
changes under `plugins` for a good example.
Also, the new return type of `Pretyping.understand` should undergo
careful review.
We don't touch `Impargs` as it is not clear how to proceed, however,
the current type of `compute_implicits_gen` looks very suspicious as
it is called often with free evars.
Some TODOs are:
- impargs was calling whd_all, the Econstr equivalent can be either
+ Reductionops.whd_all [which does refolding and no sharing]
+ Reductionops.clos_whd_flags with all as a flag.
|
|
|
|
We follow the suggestions in #402 and turn uses of `Loc.located` in
`vernac` into `CAst.t`. The impact should be low as this change mostly
affects top-level vernaculars.
With this change, we are even closer to automatically map a text
document to its AST in a programmatic way.
|
|
And some code simplification.
|
|
Adding a file fixing #5996 and which uses this feature.
|
|
We fix by interpreting the pattern in "change pat with term" in strict
mode by using the same interning code as for "match goal" (even if the
pattern is dropped afterwards).
|
|
For now, a few vernacular features were lot in the process, like locating
Ltac definitions. This will be fixed in an upcoming commit.
|
|
The internal detype function takes an additional arguments dictating
whether it should be eager or lazy.
We introduce a new type of delayed `DAst.t` AST nodes and use it for
`glob_constr`.
Such type, instead of only containing a value, it can contain a lazy
computation too. We use a GADT to discriminate between both uses
statically, so that no delayed terms ever happen to be
marshalled (which would raise anomalies).
We also fix a regression in the test-suite:
Mixing laziness and effects is a well-known hell. Here, an exception
that was raised for mere control purpose was delayed and raised at a
later time as an anomaly. We make the offending function eager.
|
