| Age | Commit message (Collapse) | Author |
|---|
|
For historical reasons, the checker was duplicating a lot of code of the
kernel. The main differences I found were bug fixes that had not been
backported.
With this patch, the checker uses the kernel as a library to serve the
same purpose as before: validation of a `.vo` file, re-typechecking all
definitions a posteriori.
We also rename some files from the checker so that they don't clash with
kernel files.
|
|
The upper layers still need a mapping constant -> projection, which is
provided by Recordops.
|
|
This will allow to merge back `Names` with `API.Names`
|
|
|
|
proofs.
|
|
|
|
* Using generic fold functions was unecessarily obscure
* No more List.mem and hence indirect use of ocaml generic comparison
* Rtree.equiv (former Rtree.compare_rtree) has now a less cryptic
semantic...
git-svn-id: svn+ssh://scm.gforge.inria.fr/svn/coq/trunk@16934 85f007b7-540e-0410-9357-904b9bb8a0f7
|
|
The earlier type [struct_expr_body] was far too broad,
leading to code with unclear invariants, many "assert false", etc etc.
Its replacement [module_alg_expr] has only three constructors:
* MEident
* MEapply : note the module_path as 2nd arg, no more constraints here
* MEwith : no more constant_body inside, constr is just fine
But no more SEBfunctor or SEBstruct constructor here (see below).
This way, this datatype corresponds to algebraic expressions,
i.e. anything that can appear in non-interactive modules.
In fact, it even coincides now with [Entries.module_struct_entry].
- Functor constructors are now necessarily on top of other
structures thanks to a generic [functorize] datatype.
- Structures are now separated from algebraic expressions by design :
the [mod_type] and [typ_expr] fields now only contain structures
(or functorized structures), while [mod_type_alg] and [typ_expr_alg]
are restricted to algebraic expressions only.
- Only the implementation field [mod_expr] could be either algebraic
or structural. We handle this via a specialized datatype
[module_implementation] with four constructors:
* Abstract : no implementation (cf. for instance Declare Module)
* Algebraic(_) : for non-interactive modules, e.g. Module M := N.
* Struct(_) : for interactive module, e.g. Module M : T. ... End M.
* FullStruct : for interactive module with no type restriction.
The [FullStruct] is a particular case of [Struct] where the implementation
need not be stored at all, since it is exactly equal to its expanded
type present in [mod_type]. This is less fragile than hoping as earlier
that pointer equality between [mod_type] and [mod_expr] will be
preserved...
- We clearly emphasize that only [mod_type] and [typ_expr] are
relevant for the kernel, while [mod_type_alg] and [typ_expr_alg]
are there only for a nicer extraction and shorter module printing.
[mod_expr] is also not accessed by the kernel, but it is important
for Print Assumptions later.
- A few implicit invariants remain, for instance "no MEwith in mod_expr",
see the final comment in Declarations
- Heavy refactoring of module-related files : modops, mod_typing,
safe_typing, declaremods, extraction/extract_env.ml ...
- Coqchk has been adapted accordingly. The code concerning MEwith
in Mod_checking is now gone, since we cannot have any in mod_expr.
git-svn-id: svn+ssh://scm.gforge.inria.fr/svn/coq/trunk@16712 85f007b7-540e-0410-9357-904b9bb8a0f7
|
|
git-svn-id: svn+ssh://scm.gforge.inria.fr/svn/coq/trunk@16399 85f007b7-540e-0410-9357-904b9bb8a0f7
|
|
git-svn-id: svn+ssh://scm.gforge.inria.fr/svn/coq/trunk@16398 85f007b7-540e-0410-9357-904b9bb8a0f7
|
|
Get rid of the LightenLibrary hack : no more last-minute
collect of opaque terms and Obj.magic tricks. Instead, we
make coqc accumulate the opaque terms as soon as constant_bodies
are created outside sections. In these cases, the opaque
terms are placed in a special table, and some (DirPath.t * int)
are used as indexes in constant_body. In an interactive session,
the local opaque terms stay directly stored in the constant_body.
The structure of .vo file stays similar : magic number, regular
library structure, digest of the first part, array of opaque terms.
In addition, we now have a final checksum for checking the
integrity of the whole .vo file. The other difference is that
lazy_constr aren't changed into int indexes in .vo files, but are
now coded as (substitution list * DirPath.t * int). In particular
this approach allows to refer to opaque terms from another
library. This (and accumulating substitutions in lazy_constr)
seems to greatly help decreasing the size of opaque tables :
-20% of vo size on the standard library :-). The compilation times
are slightly better, but that can be statistic noise.
The -force-load-proofs isn't active anymore : it behaves now
just like -lazy-load-proofs. The -dont-load-proofs mode has
slightly changed : opaque terms aren't seen as axioms anymore,
but accessing their bodies will raise an error.
Btw, API change : Declareops.body_of_constant now produces directly
a constr option instead of a constr_substituted option
git-svn-id: svn+ssh://scm.gforge.inria.fr/svn/coq/trunk@16382 85f007b7-540e-0410-9357-904b9bb8a0f7
|
|
make validate still fails, but that's another issue (#2949) we're
still working on...
git-svn-id: svn+ssh://scm.gforge.inria.fr/svn/coq/trunk@16198 85f007b7-540e-0410-9357-904b9bb8a0f7
|
|
git-svn-id: svn+ssh://scm.gforge.inria.fr/svn/coq/trunk@16098 85f007b7-540e-0410-9357-904b9bb8a0f7
|
|
git-svn-id: svn+ssh://scm.gforge.inria.fr/svn/coq/trunk@16071 85f007b7-540e-0410-9357-904b9bb8a0f7
|
|
git-svn-id: svn+ssh://scm.gforge.inria.fr/svn/coq/trunk@15392 85f007b7-540e-0410-9357-904b9bb8a0f7
|
|
Util only depends on Ocaml stdlib and Utf8 tables.
Generic pretty printing and loc functions are in Pp.
Generic errors are in Errors.
+ Training white-spaces, useless open, prlist copies random erasure.
Too many "open Errors" on the contrary.
git-svn-id: svn+ssh://scm.gforge.inria.fr/svn/coq/trunk@15020 85f007b7-540e-0410-9357-904b9bb8a0f7
|
|
The recent experiment with -dont-load-proofs in the stdlib showed that
this options isn't fully safe: some axioms were generated (Include ?
functor application ? This is still to be fully understood).
Instead, I've implemented an idea of Yann: only load opaque proofs when
we need them. This is almost as fast as -dont-load-proofs (on the stdlib,
we're now 15% faster than before instead of 20% faster with -dont-load-proofs),
but fully compatible with Coq standard behavior.
Technically, the const_body field of Declarations.constant_body now regroup
const_body + const_opaque + const_inline in a ternary type. It is now either:
- Undef : an axiom or parameter, with an inline info
- Def : a transparent definition, with a constr_substituted
- OpaqueDef : an opaque definition, with a lazy constr_substitued
Accessing the lazy constr of an OpaqueDef might trigger the read on disk of
the final section of a .vo, where opaque proofs are located.
Some functions (body_of_constant, is_opaque, constant_has_body) emulate
the behavior of the old fields. The rest of Coq (including the checker)
has been adapted accordingly, either via direct access to the new const_body
or via these new functions. Many places look nicer now (ok, subjective notion).
There are now three options: -lazy-load-proofs (default), -force-load-proofs
(earlier semantics), -dont-load-proofs. Note that -outputstate now implies
-force-load-proofs (otherwise the marshaling fails on some delayed lazy).
On the way, I fixed what looked like a bug : a module type
(T with Definition x := c) was accepted even when x in T was opaque.
I also tried to clarify Subtyping.check_constant.
git-svn-id: svn+ssh://scm.gforge.inria.fr/svn/coq/trunk@13952 85f007b7-540e-0410-9357-904b9bb8a0f7
|
|
As said in CHANGES:
<<
The inlining done during application of functors can now be controlled
more precisely. In addition to the "!F G" syntax preventing any inlining,
we can now use a priority level to select parameters to inline :
"<30>F G" means "only inline in F the parameters whose levels are <= 30".
The level of a parameter can be fixed by "Parameter Inline(30) foo".
When levels aren't given, the default value is 100. One can also use
the flag "Set Inline Level ..." to set a level.
>>
Nota : the syntax "Parameter Inline(30) foo" is equivalent to
"Set Inline Level 30. Parameter Inline foo.",
and "Include <30>F G" is equivalent to "Set Inline Level 30. Include F G."
For instance, in ZBinary, eq is @Logic.eq and should rather be inlined,
while in BigZ, eq is (fun x y => [x]=[y]) and should rather not be inlined.
We could achieve this behavior by setting a level such as 30 to the
parameter eq, and then tweaking the current level when applying functors.
This idea of levels might be too restrictive, we'll see, but at least
the implementation of this change was quite simple. There might be
situation where parameters cannot be linearly ordered according to their
"inlinablility". For these cases, we would need to mention names to inline
or not at a functor application, and this is a bit more tricky
(and might be a pain to use if there are many names).
No documentation for the moment, since this feature is experimental
and might still evolve.
git-svn-id: svn+ssh://scm.gforge.inria.fr/svn/coq/trunk@13807 85f007b7-540e-0410-9357-904b9bb8a0f7
|
|
git-svn-id: svn+ssh://scm.gforge.inria.fr/svn/coq/trunk@13462 85f007b7-540e-0410-9357-904b9bb8a0f7
|
|
git-svn-id: svn+ssh://scm.gforge.inria.fr/svn/coq/trunk@13365 85f007b7-540e-0410-9357-904b9bb8a0f7
|
|
In checker:
- delta_resolver inferred by the module system is checked through regular delta reduction steps
- the old mind_equiv field of mutual_inductive is simulated through a special table in environ
- small optimization, if the signature and the implementation of a module are physically equal
(always happen for the toplevel module of a vo) then the checker checks only the signature.
In kernel
- in names i have added two special equality functions over constant and inductive names for the checker,
so that the checker does not take in account the cannonical name inferred by the module system.
git-svn-id: svn+ssh://scm.gforge.inria.fr/svn/coq/trunk@12977 85f007b7-540e-0410-9357-904b9bb8a0f7
|
|
git-svn-id: svn+ssh://scm.gforge.inria.fr/svn/coq/trunk@12800 85f007b7-540e-0410-9357-904b9bb8a0f7
|
|
1- Management of the name-space in a modular development / sharing of non-logical objects.
2- Performance of atomic module operations (adding a module to the environment, subtyping ...).
1-
There are 3 module constructions which derive equalities on fields from a module to another:
Let P be a module path and foo a field of P
Module M := P.
Module M.
Include P.
...
End M.
Declare Module K : S with Module M := P.
In this 3 cases we don't want to be bothered by the duplication of names.
Of course, M.foo delta reduce to P.foo but many non-logical features of coq
do not work modulo conversion (they use eq_constr or constr_pat object).
To engender a transparent name-space (ie using P.foo or M.foo is the same thing)
we quotient the name-space by the equivalence relation on names induced by the
3 constructions above.
To implement this, the types constant and mutual_inductive are now couples of
kernel_names. The first projection correspond to the name used by the user and the second
projection to the canonical name, for example the internal name of M.foo is
(M.foo,P.foo).
So:
*************************************************************************************
* Use the eq_(con,mind,constructor,gr,egr...) function and not = on names values *
*************************************************************************************
Map and Set indexed on names are ordered on user name for the kernel side
and on canonical name outside. Thus we have sharing of notation, hints... for free
(also for a posteriori declaration of them, ex: a notation on M.foo will be
avaible on P.foo). If you want to use this, use the appropriate compare function
defined in name.ml or libnames.ml.
2-
No more time explosion (i hoppe) when using modules i have re-implemented atomic
module operations so that they are all linear in the size of the module. We also
have no more unique identifier (internal module names) for modules, it is now based
on a section_path like mechanism => we have less substitutions to perform at require,
module closing and subtyping but we pre-compute more information hence if we instanciate
several functors then we have bigger vo.
Last thing, the checker will not work well on vo(s) that contains one of the 3 constructions
above, i will work on it soon...
git-svn-id: svn+ssh://scm.gforge.inria.fr/svn/coq/trunk@12406 85f007b7-540e-0410-9357-904b9bb8a0f7
|
|
git-svn-id: svn+ssh://scm.gforge.inria.fr/svn/coq/trunk@12337 85f007b7-540e-0410-9357-904b9bb8a0f7
|
|
- Support for let's in the signature of the arity of an inductive type was
in the kernel part of commit 12273,
- Support for binding Coq root read-only in -R option was in commit 12220.
git-svn-id: svn+ssh://scm.gforge.inria.fr/svn/coq/trunk@12288 85f007b7-540e-0410-9357-904b9bb8a0f7
|
|
git-svn-id: svn+ssh://scm.gforge.inria.fr/svn/coq/trunk@11954 85f007b7-540e-0410-9357-904b9bb8a0f7
|
|
git-svn-id: svn+ssh://scm.gforge.inria.fr/svn/coq/trunk@11454 85f007b7-540e-0410-9357-904b9bb8a0f7
|
|
git-svn-id: svn+ssh://scm.gforge.inria.fr/svn/coq/trunk@10896 85f007b7-540e-0410-9357-904b9bb8a0f7
|
|
git-svn-id: svn+ssh://scm.gforge.inria.fr/svn/coq/trunk@10892 85f007b7-540e-0410-9357-904b9bb8a0f7
|
|
git-svn-id: svn+ssh://scm.gforge.inria.fr/svn/coq/trunk@10826 85f007b7-540e-0410-9357-904b9bb8a0f7
|
