1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
|
#include <modbus.h>
/*
* Note that this example is not self-contained. User will need to handle UART
* device initialization and relevant HAL/LL library includes. These steps are
* skipped in this example to ensure simplicity - illustrated here is the
* minimum code a user will need to use the modbus library AFTER the these
* steps.
*
*/
/*
* If using CubeMX, the HAL library files will be automatically placed in the
* correct location. The examples were tested with the Makefile option in
* CubeMX.
*
* If not using CubeMX to initialize the project, refer to the HAL/LL user
* manual for instructions on UART initialization.
*
* In order to run the example, the device initialization and superloop code
* will need to be copied from this file into the CubeMX-generated files.
*
*/
/* Function initialization for the STM32 HAL Library */
/*
* Since this library was orignally written to work with the STM32 HAL/LL API,
* the UART functions match perfectly and can be directly mapped to the Modbus
* library functions.
*/
MB_StatusTypeDef (*MB_UART_Tx)(void*, uint16_t*, uint8_t*, uint8_t*) =
&HAL_UART_Transmit;
MB_StatusTypeDef (*MB_UART_Rx)(void*, uint16_t*, uint8_t*, uint8_t*) =
&HAL_UART_Receive;
int main()
{
/* Single modbus device node */
modbus_slave_device modbus_dev_single;
/* Multiple modbus device nodes.. after all, what is the point of using
* Modbus in a single point-to-point connection? */
/* Not illustrated beyond the definition, but should be clear enough */
modbus_slave_device modbus_dev_multiple[10];
/* Set the slave ID to 1 */
modbus_dev_single.slave_id = 1;
/* Attach the UART device on the STM32 to this node */
/* Note that initialization of UART1 is not included in this example */
modbus_dev_single.modbus_uart = &huart1;
/* Continuously read the 30001 input register */
uint16_t register = 30001;
while (1) {
MB_StatusTypeDef status = ReadInputRegisters(modbus_dev_single, register, 1);
if (status == MB_OK) {
/* Do something with data in the response buffer */
/* ... */
ClearResponseBuffer(&modbus_dev_single);
}
}
return 1;
}
|
