; RUN: firrtl -i %s -o %s.v -X verilog -p c | tee %s.out | FileCheck %s
circuit Top : 
  module Top : 
    input clk1 : Clock
    input clk2 : Clock
    input reset1 : UInt<1>
    input reset2 : UInt<1>
    reg src : UInt<10>, clk1, reset1
    reg sink : UInt<10>, clk2, reset2

    onreset src := UInt(0)
    src := addw(src,UInt(1))

    reg sync_A : UInt<10>, clk2, reset2
    sync_A := src
    reg sync_B : UInt<10>, clk2, reset2
    sync_B := sync_A

    sink := sync_B

;CHECK: Done!