| Age | Commit message (Collapse) | Author |
|---|
|
* Add serialization support for LoadMemoryFileType in LoadMemoryAnnotation
Add custom LoadMemoryFileTypeSerializer.
Add test to verify LoadMemoryAnnotation can be correctly serialized/deserialized.
* Simplify and focus LoadMemoryAnnotation serialization/deserialization.
Respond to comments on earlier implementations.
* Add type FileType definition for current chisel3 code.
|
|
* Copy MemConf.scala from ucb-bar/barstools#35 into memlib.
This provides a data structure wrapper around the existing memory conf format
which contains both reading and writing methods, making it easier to write code
that needs to read the format.
* Add MemConf tests and use a Map[MemPort, Int] for port lists instead of a Seq[MemPort] which is a bit less fragile.
|
|
* Don't create nodes to hold Muxes with >0 void cases
* Added test case demonstrating void error
* Memoize intermediate expression when checking for WVoid-ness
|
|
* Add --nodedup option to facilitate FIRRTL to verilog regression testing.
* Short-circuit the DedupModules transform if NoCircuitDedupAnnotation exists.
|
|
* Create a simple generic graphviz renderer for DiGraph
There are three basic kinds
- A simple default renderer
- A ranked renderer that places nodes in columns based on depth from sources
- A sub-graph render for graphs that contain a loop
- Renders just nodes that are part of first loop found
- Plus the neighbors of the loop
- Loop edges are shown in red.
* Create a simple generic graphviz renderer for DiGraph
- Moved the graph loop finder into DiGraph
- Fixed scala doc per Edward's comments
|
|
* Run CheckHighForm after all non-emitter transforms in firrtl tests
* Remove shlw from checks.scala
* Removed mistake in fix
* Fix FirrtlSpec fix
|
|
|
|
* refactor InferWidths to allow for extra contraints, add InferWidthsWithAnnos
* add test cases
* add ResolvedAnnotationPaths trait to InferWidthsWithAnnos
* remove println
* cleanup tests
* remove extraneous constraints
* use foreachStmt instead of mapStmt
* remove support for aggregates
* fold InferWidthsWithAnnos into InferWidths
* throw exception if ref not found, check for annos before AST walk
|
|
Instead, just forward the exception
|
|
|
|
(#1025)
* No time left for you - quickly rename deep bundles still occasionally fails.
Run the "quick" calibration test three times and choose the maximum as the basis for comparison with the "deep" test.
* Rename local variable to less confusing name.
|
|
|
|
* Correctly handle dots in loaded memory paths
* Added test for loadmem filename
|
|
UniquifySpec.quicklyrenamedeepbundles (#1000)
* Attempt to deal with timing vagaries in UniquifySpec.quicklyrenamedeepbundles
Switching to Scala 2.12.8 cause this test to start failing on OSX. Try earlier scheme to compare shallow vs deep to reduce brittleness.
* Address review concerns; update comment.
|
|
Fixes #219
* Adds AsyncResetType (similar to ClockType)
* Registers with reset signal of type AsyncResetType are async reset
registers
* Registers with async reset can only be reset to literal values
* Add initialization logic for async reset registers
|
|
This uses the foldShiftRight method of the ConstantPropagation
Transform when legalizing Shr PrimOps. This has the effect of removing
literals with bit extracts from the MinimumVerilogCompiler.
This makes the formerly private foldShiftRight method of a public
method of the ConstantPropagation companion object.
Tests in the MimimumVerilogCompilerSpec are updated to check that Shr
is handled as intended.
Signed-off-by: Schuyler Eldridge <schuyler.eldridge@ibm.com>
|
|
This adds the RemoveValidIf Pass to the MinimumLowFirrtlOptimization
Transform. A test case is included to verify that `is invalid` is
properly converted to a connection to zero.
Signed-off-by: Schuyler Eldridge <schuyler.eldridge@ibm.com>
|
|
This adds runs of the minimum Verilog compiler and SystemVerilog
compiler in DriverSpec.
Signed-off-by: Schuyler Eldridge <schuyler.eldridge@ibm.com>
|
|
This adds "mverilog" to the "--compiler" command line option. This
will run the MinimumVerilogCompiler.
This additionally fixes the MinimumVerilogCompiler such that
DeadCodeElimination will not be run (it's not supposed to be). This is
done by adding a MinimumVerilogEmitter, subclassing VerilogVerilog,
that strips the DeadCodeElimination step from its parent.
Additionally, BlackBoxSourceHelper is removed from the
MinimumVerilogCompiler since this will be run by the VerilogEmitter
already.
Signed-off-by: Schuyler Eldridge <schuyler.eldridge@ibm.com>
|
|
* Enhance constant propagation across registers
* Add more elaborate test case for register const prop
|
|
|
|
|
|
* Improve Shl codegen; eliminate Shlw WIR node
If we emit shl(x, k) as {x, k'h0} instead of (x << k), then there's
no need for Verilog-specific padding in the PadWidths pass. Avoiding
the redundant padding improves compiler/simulator performance and
renders Shlw unnecessary.
* [skip formal checks] Add test
|
|
|
|
Fixes #990
h/t @pentin-as and @abejgonzalez
|
|
|
|
This fixes issue #988
I tried one alternative to this fix: record the time to do a *no rename* run (`depth = 0`) and check that the time to do the *deep rename* (`depth = 500`) was a reasonable multiple of the *no rename* test. Unfortunately, the discrepancies were all over the map, sometime as much three orders of magnitude difference.
I decided the current fix was the simplest - don't enforce timing checks if we're doing coverage testing, although determining the latter is brittle.
|
|
Previously, components that did not affect the output would cause
exceptions because they were missing from the label2group Map. This
commit treats them as "reachable" by the ports so they are included in
the default "ungrouped" group.
|
|
This fixes an issue where expressions created by GroupComponents would
be improperly lowered because they were not marked as references to
instance ports.
|
|
|
|
|
|
* Give better error when mport references non-existent memory
* Closes #796
|
|
|
|
Iterating on a HashSet could cause identical modules (including
annotations) to not dedup
|
|
|
|
Where the high form compiler removes Chirrtl (and runs some checks),
this compiler does nothing but read in the circuit and then emit it
|
|
This breaks firrtl.options.Stage into a small type hierarchy:
* Phase: something that transforms an AnnotationSeq
* Stage extends Phase: a Phase with a Command Line Interface
Some of the old "common options" (input annotation file and target
directory) are moved into firrtl.options and provided as part of the Stage
class. Stage will automatically preprocess an input annotation sequence to
resolve all input annotation files and add a default target directory.
Minor changes:
* Adds ViewException
* Stops mixing in the DoNotTerminateOnExit trait into the default Shell
parser
* Add StageOptionsView
Signed-off-by: Schuyler Eldridge <schuyler.eldridge@ibm.com>
|
|
- Add firrtl.transforms.CombineCats
- Use CombineCats in LowFirrtlOptimization
- Modify Verilog emitter to allow for nested Cat DoPrims
- Modify firrtlEquivalenceTest to write input FIRRTL string to test directory
|
|
Signed-off-by: Schuyler Eldridge <schuyler.eldridge@ibm.com>
|
|
Signed-off-by: Schuyler Eldridge <schuyler.eldridge@ibm.com>
|
|
This changes the CheckTypes.UniferredWidth exception to include the pretty
printed Target that was uninferred and suggests to the user that they may
have forgotten to assign to it. This changes the CheckTypes pass to
communicate the necessary Target information during AST traversal such
that when an uninferred width is found, the Target is known and available.
This also adds one test checking the message of the UniferredWidth
exception.
Signed-off-by: Schuyler Eldridge <schuyler.eldridge@ibm.com>
|
|
This adds a pretty printer for firrtl.annotation.Target and associated
tests. This uses a tree-like output where the following target
~Circuit|Module/foo:Foo>ref.field[0] will serialize to:
circuit Circuit:
└── module Module:
└── foo of Foo:
└── ref.field[0]
This enables better error messages and a human readable syntax better than
the existing serialize method (and avoiding the need for users to
understand the Target serialization syntax), but that is not intended to
be deserialized nor space efficient.
Signed-off-by: Schuyler Eldridge <schuyler.eldridge@ibm.com>
|
|
|
|
It is O(n) and every use is in an O(n) iteration resulting in O(n^2).
Same information can be extracted from create_exps which happens to also
be called at every use of get_flip.
|
|
When constructing the black box helper file list (firrtl_black_box_resource_files.f), filter out Verilog header files (*.vh) - Fixes #917
|
|
Formerly #865
Major Code Changes/Features Added:
Added Target trait as replacement for Named
Added TargetToken as token in building Target
Added GenericTarget as a catch-all Target
Added CircuitTarget, ModuleTarget, ReferenceTarget, and InstanceTarget
Added ResolvePaths annotation
Added EliminateTargetPaths (and helper class DuplicationHelper)
Updated Dedup to work with instance annotations
Updated RenameMap to work with instance annotations
DCE & ConstantProp extend ResolveAnnotationPaths
|
|
This reverts commit 7e2f787e125227dc389d5cf1d09717748ecfed2e.
|
|
Added Target, which now supports Instance Annotations. See #865 for details.
|
|
This wraps interactions with a BlackBox resource file such that a
FileNotFoundException are wrapped in a BlackBoxNotFoundException and
rethrown. This provides a better, verbose error message to the user and avoids a
FileNotFoundException showing up as an internal FIRRTL error.
This adds tests that the expected exception is thrown for both
BlackBoxResourceAnno and BlackBoxResourceAnno.
Signed-off-by: Schuyler Eldridge <schuyler.eldridge@ibm.com>
|
|
This moves VerilogRename out of Passes.scala and genericizes it as the new
Transform KemoveKeywordCollisions. This new Transform will remove keywords
for arbitrary sets of reserved keyword.
This adds VerilogRename back as a class instead of an object.
Signed-off-by: Schuyler Eldridge <schuyler.eldridge@ibm.com>
|
