| Age | Commit message (Collapse) | Author |
|---|
|
|
|
number of files
|
|
|
|
|
|
Modified initial_check.ml so it no longer requires type_internal. It's
still needs cleaned up in a few ways. Most of the things it's trying
to do could be done nicer if we took some time to re-factor it, and
some of the things should just be handled by the main typechecker,
leaving it as a think layer between the parse_ast and the ast.
Now that's done everything can be switched to the new typechecker and
the _new suffixes were deleted from everything except the
monomorphisation pass because I don't know the status of that.
|
|
sail_new_tc
|
|
1) Added a new construct to the expression level: constraint. This is the
essentially the boolean form of sizeof. Whereas sizeof takes a nexp
and has type [:'n:], constraint takes a n_constraint and returns a
boolean. The hope is this will allow for flow typing to be represented
more explicitly in the generatated sail from ASL.
For example we could have something like:
default Order dec
val bit[64] -> unit effect pure test64
val forall 'n, ('n = 32 | 'n = 64 | 'n = 10) & 'n != 43. bit['n] -> unit effect pure test
function forall 'n. unit test addr =
{
if constraint('n = 32) then {
()
} else {
assert(constraint('n = 64), "64-bit mode");
test64(addr)
}
}
2) The other thing this example demonstrates is that flow constraints
now work with assert and not just if. Even though flow typing will
only guarantee us that 'n != 32 in the else branch, the assert gives
us 'n = 64. This is very useful as it's a common idiom in the ARM
spec to guarantee such things with an assert.
3) Added != to the n_constraint language
4) Changed the n_constraint language to add or and and as constructs
in constraints. Previously one could have a list of conjuncts each of
which were simple inequalites or set constraints, now one can do for
example:
val forall 'n, ('n = 32 | 'n = 64) & 'n in {32, 64}. bit['n] -> unit effect pure test
This has the very nice upside that every n_constraint can now be
negatated when flow-typing if statements. Note also that 'in' has been
introduced as a synonym for 'IN' in the constraint 'n in {32,64}. The
use of a block capital keyword was a bit odd there because all the
other keywords are lowercase.
|
|
Initial typecheck still uses previous typechecker
|
|
|
|
sail_new_tc
|
|
|
|
|
|
|
|
Added vector concatenation patterns. Currently slightly more
restrictive than before as each subvector's length must be inferrable
from just that particular subvector - this may require additional type
annotations in certain vector patterns. How exactly weird vector
patterns, such as incrementing and decrementing vectors appearing in
the same pattern, as well as patterns with funny start indexes should
be dealt with correctly is unclear. It's probably best to be as
restrictive as possible to avoid unsoundness bugs.
Added a new option -ddump_tc_ast which dumps the (new) typechecked AST
to stdout. Also added a new option -dno_cast which disables implicit
casting in the typechecker. These options can be used in conjunction
to dump the typechecked ast (which has all implicit casts resolved),
and then re-typecheck it as a way to check that the typechecker is
indeed resolving all casts correctly, and is reconstructing a fully
type correct AST. The run_tests.sh script in test/typecheck has been
modified to do this.
Removed the dependency on Type_internal.ml from
pretty_print_sail.ml. This means that we can no longer pretty print
certain internal constructs produced by the old typechecker, but on
the plus side it means that the sail pretty printer is type system
agnostic and works with any annotation AST, irregardless of the type
of annotations. Also fixed a few bugs where certain constructs would
be pretty printed incorrectly.
|
|
Can now properly typecheck register declarations and assignments. Also
better support for assignments to mutable variables. Assignment to
immutable let bound variables is disallowed as it should be, and casts
when assiging to existing bound variables should be handled properly.
Added additional tests for these new features, and a new option
-just_check that allows the new checker to be run without the old.
|
|
Started work on a bi-directional type checking algorithm for sail
based on Mark and Neel's typechecker for minisail in idl
repository. It's a bit different though, because we are working with
the unmodified sail AST, and not in let normal-form.
Currently, we can check a fragment of sail that includes pattern
matching (in both function clauses and switch statements), numeric
constraints (but not set constraints), function application, casts
between numeric types, assignments to local mutable variables,
sequential blocks, and (implicit) let expressions.
For example, we can correctly typecheck the following program:
val forall Nat 'n, Nat 'm. ([:'n + 20:], [:'m:]) -> [:'n + 20 + 'm:] effect pure plus
val forall Nat 'n, 'n <= -10. [:'n:] -> [:'n:] effect pure minus_ten_id
val forall Nat 'n, 'n >= 10. [:'n:] -> [:'n:] effect pure ten_id
val forall Nat 'N, 'N >= 63. [|10:'N|] -> [|10:'N|] effect pure branch
function forall Nat 'N, 'N >= 63. [|10:'N|] branch x =
{
switch x {
case ([|10:30|]) y -> y
case ([:31:]) _ -> sizeof 'N
case ([|31:40|]) _ -> plus(60,3)
}
}
and branch (([|51:63|]) _) = ten_id(sizeof 'N)
The typechecker has been set up so it can produce derivation trees for
the typing judgements and constraints, so for the above program we
have:
Checking function branch
Adding local binding x :: range<10, 'N>
| Check { switch x { case (range<10, 30>) y -> y case (atom<31>) _ -> sizeof 'N case (range<31, 40>) _ -> plus(60, 3)} } <= range<10, 'N>
| | Check switch x { case (range<10, 30>) y -> y case (atom<31>) _ -> sizeof 'N case (range<31, 40>) _ -> plus(60, 3)} <= range<10, 'N>
| | | Infer x => range<10, 'N>
| | Subset 'N >= 63 |- {'fv1 | 10 <= 'fv1 & 'fv1 <= 30} {'fv0 | 10 <= 'fv0 & 'fv0 <= 'N}
| | Adding local binding y :: range<10, 30>
| | | Check y <= range<10, 'N>
| | | | Infer y => range<10, 30>
| | | Subset 'N >= 63 |- {'fv4 | 10 <= 'fv4 & 'fv4 <= 30} {'fv3 | 10 <= 'fv3 & 'fv3 <= 'N}
| | Subset 'N >= 63 |- {'fv7 | 31 <= 'fv7 & 'fv7 <= 31} {'fv6 | 10 <= 'fv6 & 'fv6 <= 'N}
| | | Check sizeof 'N <= range<10, 'N>
| | | | Infer sizeof 'N => atom<'N>
| | | Subset 'N >= 63 |- {'fv10 | 'N <= 'fv10 & 'fv10 <= 'N} {'fv9 | 10 <= 'fv9 & 'fv9 <= 'N}
| | Subset 'N >= 63 |- {'fv13 | 31 <= 'fv13 & 'fv13 <= 40} {'fv12 | 10 <= 'fv12 & 'fv12 <= 'N}
| | | Check plus(60, 3) <= range<10, 'N>
| | | | | Infer 60 => atom<60>
| | | | | Infer 3 => atom<3>
| | | | Infer plus(60, 3) => atom<((60 - 20) + (20 + 3))>
| | | Subset 'N >= 63 |- {'fv20 | ((60 - 20) + (20 + 3)) <= 'fv20 & 'fv20 <= ((60 - 20) + (20 + 3))} {'fv19 | 10 <= 'fv19 & 'fv19 <= 'N}
Subset 'N >= 63 |- {'fv23 | 51 <= 'fv23 & 'fv23 <= 63} {'fv22 | 10 <= 'fv22 & 'fv22 <= 'N}
| Check ten_id(sizeof 'N) <= range<10, 'N>
| | | Infer sizeof 'N => atom<'N>
| | Prove 'N >= 63 |- 'N >= 10
| | Infer ten_id(sizeof 'N) => atom<'N>
| Subset 'N >= 63 |- {'fv28 | 'N <= 'fv28 & 'fv28 <= 'N} {'fv27 | 10 <= 'fv27 & 'fv27 <= 'N}
Judgements are displayed in the order they occur - inference steps go
inwards bottom up, while checking steps go outwards top-down. The
subtyping rules from Mark and Neel's check_sub rule all are verified
using the Z3 constraint solver.
I have been a set of tests in test/typecheck which aim to exhaustively
test all the code paths in the typechecker, adding new tests everytime
I add support for a new construct.
The new checker is turned on using the -new_typecheck option, and can
be tested (from the toplevel sail directory) by running:
test/typecheck/run_tests.sh -new_typecheck
(currently passes 32/32)
and compared to the old typechecker by
test/typecheck/run_tests.sh
(currently passes 21/32)
|
|
|
|
|
|
|
|
same time with the types both have in common factored out into separate file, rename one mips shallow embedding _extras file as required by this
|
|
instruction state, factor out interpreter/shallow embedding value conversion
|
|
state monad, library fixes
|
|
|
|
|
|
|
|
|
|
letbound variables
|
|
sail_impl_base, add sail_impl_base.outcome, add interp_inter_imp auxiliary functions, make prompt use sail_impl_base.outcome
|
|
|
|
|
|
well as items of kind Type.
Syntax for the feature is:
def Nat id = nexp
Note: some useful nexps may not parse properly.
All typedef forms can also be used as def Type ... if desired, but this is not required.
|
|
processing
|
|
|
|
correct now, fixes, pp
|
|
functions, and state definition
|
|
|
|
|
|
|
|
|
|
output of such
|
|
|
|
Events are eamem to signal the memory address to write to and wmv to pass the value to write
|
|
function for good unification, especially for rewriting
|
|
Also stop rewriting code in the pretty printer, instead move it all into a new general rewriting pass
|
|
|
|
|
|
instruction
|
|
|
|
will be reflected in short hand type syntax, inc is still the default if undeclared
So:
default order dec
register bit[32] t (* Declares t as a decreasing vector, starting at 31 on the left and decreasing to 0 *)
default order inc
register bit[32] o (* Declares o as an increasing vector, starting at 0 on the left and increasing to 31 *)
It is presently possible to change the default mid-file; this is almost certainly bad and I will turn it into an error soon.
|
|
interpreter.
An alias can be read within the interpreter, but not written to. Exits aren't yet taken in the interpreter.
|
