| Age | Commit message (Collapse) | Author |
|---|
|
|
|
|
|
|
|
This refactoring is intended to allow this type to have more than just a
list of definitions in future.
|
|
Insert $file_start and $file_end pragmas in the AST, as well as
$include_start and $include_end pragmas so we can reconstruct the
original file structure later if needed, provided nothing like
topological sorting has been done.
Have the Lexer produce a list of comments whenever it parses a file,
which can the be attached to the nearest nodes in the abstract syntax
tree.
|
|
|
|
|
|
Remove P_record as it's never been implemented in
parser/typechecker/rewriter, and is not likely to be. This also means
we can get rid of some ugliness with the fpat and mfpat types. Stubs
for P_or and P_not are left as they still may get added to ASL and we
might want to support them, although there are good reasons to keep
our patterns simple.
The lem warning for while -> while0 for ocaml doesn't matter because
it's only used in lem, and the 32-bit number warning is just noise.
|
|
|
|
|
|
Mostly to make constraints sent to the SMT solver and Coq nicer, but
also makes it easy to remove uninformative constraints in the Coq
back-end.
|
|
|
|
Clean up ott grammar a bit
|
|
are"
This reverts commit 8bed4e4ef414f93e02f28f0e5eb223a855ba3d14.
|
|
sane, and an incomplete check on undefined literals.
|
|
Only change that should be needed for 99.9% of uses is to change
vector('n, 'ord, bit) to bitvector('n, 'ord), and adding
$ifndef FEATURE_BITVECTOR_TYPE
type bitvector('n, dec) = vector('n, dec, bit)
$endif
for to support any Sail before this
Currently I have all C, Typechecking, and SMT tests passing, as well
as the RISC-V spec building OCaml and C completely unmodified.
|
|
|
|
can now write e.g.
forall (constant 'n : Int) rather than forall ('n: Int)
which requires 'n to be a constant integer value whenever the function
is called. I added this to the 'addrsize variable on memory
reads/writes to absolutely guarantee in the SMT generation that we
don't have to worry about the address being a variable length
bitvector.
|
|
|
|
|
|
|
|
Currently only supports pure termination measures for loops with effects.
The user syntax uses separate termination measure declarations, as in the
previous recursive termination measures, which are rewritten into the
loop AST nodes before type checking (because it would be rather difficult
to calculate the correct environment to type check the separate declaration
in).
|
|
- Rename DeIid to Operator. It corresponds to operator <string> in the
syntax. The previous name is from when it was called deinfix in
sail1.
- Removed things that weren't actually common from
pretty_print_common.ml, e.g. printing identifiers is backend
specific. The doc_id function here was only used for a very specific
use case in pretty_print_lem, so I simplified it and renamed it to
doc_sia_id, as it is always used for a SIA.Id whatever that is.
- There is some support for anonymous records in constructors, e.g.
union Foo ('a : Type) = {
MkFoo : { field1 : 'a, field2 : int }
}
somewhat similar to the enum syntax in Rust. I'm not sure when this
was added, but there were a few odd things about it. It was
desugared in the preprocessor, rather than initial_check, and the
desugaring generated incorrect code for polymorphic anonymous
records as above.
I moved the code to initial_check, so the pre-processor now just
deals with pre-processor things and not generating types, and I
fixed the code to work with polymorphic types. This revealed some
issues in the C backend w.r.t. polymorphic structs, which is the
bulk of this commit. I also added some tests for this feature.
- OCaml backend can now generate a valid string_of function for
polymorphic structs, previously this would cause the ocaml to fail
to compile.
- Some cleanup in the Sail ott definition
- Add support for E_var in interpreter previously this would just
cause the interpreter to fail
|
|
These should be preserved for prover backends.
|
|
:def <definition> evaluates a top-level definition
:(b)ind <id> : <type> creates an identifier within the interactive type-checking environment
:let <id> = <expression> defines an identifier
Using :def the following now works and brings the correct vector
operations into scope.
:def default Order dec
:load lib/prelude.sail
Also fix a type-variable shadowing bug
|
|
|
|
Check in a slightly nicer stylesheet for OCamldoc generated
documentation in etc. Most just add a maximum width and increase the
font size because the default looks absolutely terrible on high-DPI
monitors.
Move val_spec_ids out of initial_check and into ast_util where it
probably belongs. Rename some functions in util.ml to better match the
OCaml stdlib.
|
|
|
|
Perhaps suprisingly to some, this did not mean that Sail was
unable to typecheck the identify function.
While doing this rename Effect_opt_pure to Effect_opt_none - as
Effect_opt_pure was the effect equivalent of Typ_annot_opt_none,
and actually means that the function definition lacks an effect
annnotation, not that the function is actually pure, so this was
*extremely* misleading. The effect_opt that actually indicated a
function is pure was (and still is) the succinct:
Effect_opt_aux (Effect_opt_effect (Effect_aux (Effect_set [], _)), _)
In fact because in the grammar we only specify effects on
valspecs (they can always be inferred for fundefs in the absence
of a valspec) effect_opts are basically vestigial and are always
Effect_opt_none.
What might actually be super nice would be to remove rec_opt,
effect_opt and typ_annot_opt from fundefs in ast.ml altogether
and if we want them in the syntax just have them in parse_ast.ml
and pull them into a valspec during the initial check.
|
|
specialize functions now take a 'specialization' parameter that
specifies how they will specialize the AST. typ_ord_specialization
gives the previous behaviour, whereas int_specialization allows
specializing on Int-kinded arguments. Note that this can loop forever
unless the appropriate case splits are inserted beforehand, presumably
by monomorphisation.
rename is_nat_kopt -> is_int_kopt for consistency
|
|
|
|
This supports the following syntax:
type xlen : Int = 64
type ylen : Int = 1
type xlenbits = bits(xlen)
bitfield Mstatus : xlenbits = {
SD : xlen - ylen,
SXL : xlen - ylen - 1 .. xlen - ylen - 3
}
|
|
|
|
Allow a file sail.json in the same directory as the sail source file
which contains the ordering and options needed for sail files involved
in a specific ISA definition. I have an example for v8.5 in sail-arm.
The interactive Sail process running within emacs then knows about the
relationship between Sail files, so C-c C-l works for files in the ARM
spec. Also added a C-c C-x command to jump to a type error. Requires
yojson library to build interactive Sail.
|
|
|
|
|
|
We want to ensure that no_devices.sail and devices.sail have the same
effect footprint, because with a snapshot-type release in sail-arm, we
can't rebuild the spec with asl_to_sail every time we switch from
running elf binaries to booting OS's. This commit allows registers to
have arbitrary effects, so registers that are really representing
memory-mapped devices don't have to have the wmem/rmem effect.
|
|
|
|
|
|
function (preparing for marshalling)
|
|
Remove unused name schemes and DEF_kind
|
|
Simply constraints further before calling Z3 to improve performance of
sizeof re-writing.
|
|
|
|
|
|
test/typecheck/pass/tautology.sail constaints tests of various boolean
properties, e.g.
// de Morgan
_prove(constraint(not('p | 'q) <--> not('p) & not('q)));
_prove(constraint(not('p & 'q) <--> not('p) | not('q)));
introduce a new _not_prove case which allows us to assert in tests
that a constraint is not provable. This test essentially tests that
constraints map to sensible problems in the SMT solver, without
testing flow typing or any other features.
Add a script test/typecheck/update_errors.sh, which regenerates the
expected error messages. Testing that type-checking failures is
important, but can be brittle when the error messages change for
inconsequential reasons. This script automates fixing this.
Also ensure that this test case works correctly in Lem
|
|
|
|
We should infer type variable kinds better in initial_check.ml, but we really don't want to have to deal
with that everywhere, especially when we can no longer easily cheat and assume KOpt_none implies K_int.
|
|
Remove some dead code in Pretty_print_common
Start thinking a bit about Minisail-esque syntactic sugar in initial_check
|
|
This only applies to recursive functions and uses the termination measure
merely as a limit to the recursive call depth, rather than proving the
measure correct.
|
|
* Improve type inference for numeric if statements (if_infer test)
* Correctly handle constraints for existentially quantified constructors (constraint_ctor test)
* Canonicalise all numeric types in function arguments, which
triggers some weird edge cases between parametric polymorphism and
subtyping of numeric arguments
* Because of this eq_int, eq_range, and eq_atom etc become identical
* Avoid duplicating destruct_exist in Env
* Handle some odd subtyping cases better
|
