From 75abee206d1a575aa98a486d043c94d64df432c1 Mon Sep 17 00:00:00 2001 From: Damien George Date: Sun, 26 Jan 2014 17:41:01 +0000 Subject: stm: USB host mode working! Restructure stm library directories. --- stm/lib/stm324x7i_eval.c | 231 - stm/lib/stm324x7i_eval.h | 112 - stm/lib/stm324x7i_eval_sdio_sd.c | 2948 ------------ stm/lib/stm324x7i_eval_sdio_sd.h | 408 -- stm/lib/stm32f4xx.h | 9156 -------------------------------------- stm/lib/stm32f4xx_adc.c | 1745 -------- stm/lib/stm32f4xx_adc.h | 656 --- stm/lib/stm32f4xx_conf.h | 122 - stm/lib/stm32f4xx_dac.c | 714 --- stm/lib/stm32f4xx_dac.h | 304 -- stm/lib/stm32f4xx_dma.c | 1301 ------ stm/lib/stm32f4xx_dma.h | 609 --- stm/lib/stm32f4xx_exti.c | 312 -- stm/lib/stm32f4xx_exti.h | 183 - stm/lib/stm32f4xx_flash.c | 1580 ------- stm/lib/stm32f4xx_flash.h | 482 -- stm/lib/stm32f4xx_gpio.c | 611 --- stm/lib/stm32f4xx_gpio.h | 489 -- stm/lib/stm32f4xx_i2c.c | 1462 ------ stm/lib/stm32f4xx_i2c.h | 711 --- stm/lib/stm32f4xx_pwr.c | 885 ---- stm/lib/stm32f4xx_pwr.h | 210 - stm/lib/stm32f4xx_rcc.c | 2217 --------- stm/lib/stm32f4xx_rcc.h | 615 --- stm/lib/stm32f4xx_rng.c | 397 -- stm/lib/stm32f4xx_rng.h | 120 - stm/lib/stm32f4xx_rtc.c | 2761 ------------ stm/lib/stm32f4xx_rtc.h | 881 ---- stm/lib/stm32f4xx_sdio.c | 1011 ----- stm/lib/stm32f4xx_sdio.h | 536 --- stm/lib/stm32f4xx_spi.c | 1312 ------ stm/lib/stm32f4xx_spi.h | 549 --- stm/lib/stm32f4xx_syscfg.c | 240 - stm/lib/stm32f4xx_syscfg.h | 210 - stm/lib/stm32f4xx_tim.c | 3365 -------------- stm/lib/stm32f4xx_tim.h | 1150 ----- stm/lib/stm32f4xx_usart.c | 1486 ------- stm/lib/stm32f4xx_usart.h | 431 -- stm/lib/stm_misc.c | 249 -- stm/lib/stm_misc.h | 178 - stm/lib/system_stm32f4xx.h | 105 - stm/lib/usb_bsp.c | 272 -- stm/lib/usb_bsp.h | 103 - stm/lib/usb_conf.h | 348 -- stm/lib/usb_core.c | 2162 --------- stm/lib/usb_core.h | 417 -- stm/lib/usb_dcd.c | 478 -- stm/lib/usb_dcd.h | 164 - stm/lib/usb_dcd_int.c | 879 ---- stm/lib/usb_dcd_int.h | 127 - stm/lib/usb_defines.h | 249 -- stm/lib/usb_regs.h | 1188 ----- stm/lib/usbd_cdc_core.h | 143 - stm/lib/usbd_cdc_vcp.c | 220 - stm/lib/usbd_cdc_vcp.h | 52 - stm/lib/usbd_conf.h | 23 - stm/lib/usbd_core.c | 506 --- stm/lib/usbd_core.h | 120 - stm/lib/usbd_def.h | 157 - stm/lib/usbd_desc.c | 331 -- stm/lib/usbd_desc.h | 121 - stm/lib/usbd_ioreq.c | 244 - stm/lib/usbd_ioreq.h | 121 - stm/lib/usbd_msc_bot.c | 401 -- stm/lib/usbd_msc_bot.h | 153 - stm/lib/usbd_msc_data.c | 134 - stm/lib/usbd_msc_data.h | 105 - stm/lib/usbd_msc_mem.h | 113 - stm/lib/usbd_msc_scsi.c | 729 --- stm/lib/usbd_msc_scsi.h | 195 - stm/lib/usbd_pyb_core.c | 931 ---- stm/lib/usbd_pyb_core.h | 4 - stm/lib/usbd_pyb_core2.c | 323 -- stm/lib/usbd_req.c | 868 ---- stm/lib/usbd_req.h | 108 - stm/lib/usbd_storage_msd.c | 341 -- stm/lib/usbd_usr.c | 115 - stm/lib/usbd_usr.h | 141 - 78 files changed, 56130 deletions(-) delete mode 100644 stm/lib/stm324x7i_eval.c delete mode 100644 stm/lib/stm324x7i_eval.h delete mode 100644 stm/lib/stm324x7i_eval_sdio_sd.c delete mode 100644 stm/lib/stm324x7i_eval_sdio_sd.h delete mode 100644 stm/lib/stm32f4xx.h delete mode 100644 stm/lib/stm32f4xx_adc.c delete mode 100644 stm/lib/stm32f4xx_adc.h delete mode 100644 stm/lib/stm32f4xx_conf.h delete mode 100644 stm/lib/stm32f4xx_dac.c delete mode 100644 stm/lib/stm32f4xx_dac.h delete mode 100644 stm/lib/stm32f4xx_dma.c delete mode 100644 stm/lib/stm32f4xx_dma.h delete mode 100644 stm/lib/stm32f4xx_exti.c delete mode 100644 stm/lib/stm32f4xx_exti.h delete mode 100644 stm/lib/stm32f4xx_flash.c delete mode 100644 stm/lib/stm32f4xx_flash.h delete mode 100644 stm/lib/stm32f4xx_gpio.c delete mode 100644 stm/lib/stm32f4xx_gpio.h delete mode 100644 stm/lib/stm32f4xx_i2c.c delete mode 100644 stm/lib/stm32f4xx_i2c.h delete mode 100644 stm/lib/stm32f4xx_pwr.c delete mode 100644 stm/lib/stm32f4xx_pwr.h delete mode 100644 stm/lib/stm32f4xx_rcc.c delete mode 100644 stm/lib/stm32f4xx_rcc.h delete mode 100644 stm/lib/stm32f4xx_rng.c delete mode 100644 stm/lib/stm32f4xx_rng.h delete mode 100644 stm/lib/stm32f4xx_rtc.c delete mode 100644 stm/lib/stm32f4xx_rtc.h delete mode 100644 stm/lib/stm32f4xx_sdio.c delete mode 100644 stm/lib/stm32f4xx_sdio.h delete mode 100644 stm/lib/stm32f4xx_spi.c delete mode 100644 stm/lib/stm32f4xx_spi.h delete mode 100644 stm/lib/stm32f4xx_syscfg.c delete mode 100644 stm/lib/stm32f4xx_syscfg.h delete mode 100644 stm/lib/stm32f4xx_tim.c delete mode 100644 stm/lib/stm32f4xx_tim.h delete mode 100644 stm/lib/stm32f4xx_usart.c delete mode 100644 stm/lib/stm32f4xx_usart.h delete mode 100644 stm/lib/stm_misc.c delete mode 100644 stm/lib/stm_misc.h delete mode 100644 stm/lib/system_stm32f4xx.h delete mode 100644 stm/lib/usb_bsp.c delete mode 100644 stm/lib/usb_bsp.h delete mode 100644 stm/lib/usb_conf.h delete mode 100644 stm/lib/usb_core.c delete mode 100644 stm/lib/usb_core.h delete mode 100644 stm/lib/usb_dcd.c delete mode 100644 stm/lib/usb_dcd.h delete mode 100644 stm/lib/usb_dcd_int.c delete mode 100644 stm/lib/usb_dcd_int.h delete mode 100644 stm/lib/usb_defines.h delete mode 100644 stm/lib/usb_regs.h delete mode 100644 stm/lib/usbd_cdc_core.h delete mode 100644 stm/lib/usbd_cdc_vcp.c delete mode 100644 stm/lib/usbd_cdc_vcp.h delete mode 100644 stm/lib/usbd_conf.h delete mode 100644 stm/lib/usbd_core.c delete mode 100644 stm/lib/usbd_core.h delete mode 100644 stm/lib/usbd_def.h delete mode 100644 stm/lib/usbd_desc.c delete mode 100644 stm/lib/usbd_desc.h delete mode 100644 stm/lib/usbd_ioreq.c delete mode 100644 stm/lib/usbd_ioreq.h delete mode 100644 stm/lib/usbd_msc_bot.c delete mode 100644 stm/lib/usbd_msc_bot.h delete mode 100644 stm/lib/usbd_msc_data.c delete mode 100644 stm/lib/usbd_msc_data.h delete mode 100644 stm/lib/usbd_msc_mem.h delete mode 100644 stm/lib/usbd_msc_scsi.c delete mode 100644 stm/lib/usbd_msc_scsi.h delete mode 100644 stm/lib/usbd_pyb_core.c delete mode 100644 stm/lib/usbd_pyb_core.h delete mode 100644 stm/lib/usbd_pyb_core2.c delete mode 100644 stm/lib/usbd_req.c delete mode 100644 stm/lib/usbd_req.h delete mode 100644 stm/lib/usbd_storage_msd.c delete mode 100644 stm/lib/usbd_usr.c delete mode 100644 stm/lib/usbd_usr.h (limited to 'stm/lib') diff --git a/stm/lib/stm324x7i_eval.c b/stm/lib/stm324x7i_eval.c deleted file mode 100644 index c1be681f1..000000000 --- a/stm/lib/stm324x7i_eval.c +++ /dev/null @@ -1,231 +0,0 @@ -/** - ****************************************************************************** - * @file STM324x7i_eval.c - * @author MCD Application Team - * @version V1.0.0 - * @date 11-January-2013 - * @brief This file provides - * - set of firmware functions to manage Leds, push-button and COM ports - * - low level initialization functions for SD card (on SDIO) and - * serial EEPROM (sEE) - * available on STM324x7I-EVAL evaluation board(MB786) from - * STMicroelectronics. - ****************************************************************************** - * @attention - * - *

© COPYRIGHT 2013 STMicroelectronics

- * - * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License"); - * You may not use this file except in compliance with the License. - * You may obtain a copy of the License at: - * - * http://www.st.com/software_license_agreement_liberty_v2 - * - * Unless required by applicable law or agreed to in writing, software - * distributed under the License is distributed on an "AS IS" BASIS, - * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - * See the License for the specific language governing permissions and - * limitations under the License. - * - ****************************************************************************** - */ - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx_dma.h" -#include "stm32f4xx_exti.h" -#include "stm32f4xx_gpio.h" -#include "stm32f4xx_rcc.h" -#include "stm32f4xx_sdio.h" -//#include "stm32f4xx_syscfg.h" -#include "stm_misc.h" -#include "stm324x7i_eval.h" -//#include "stm32f4xx_i2c.h" - -/** - * @brief DeInitializes the SDIO interface. - * @param None - * @retval None - */ -void SD_LowLevel_DeInit(void) -{ - GPIO_InitTypeDef GPIO_InitStructure; - - /*!< Disable SDIO Clock */ - SDIO_ClockCmd(DISABLE); - - /*!< Set Power State to OFF */ - SDIO_SetPowerState(SDIO_PowerState_OFF); - - /*!< DeInitializes the SDIO peripheral */ - SDIO_DeInit(); - - /* Disable the SDIO APB2 Clock */ - RCC_APB2PeriphClockCmd(RCC_APB2Periph_SDIO, DISABLE); - - GPIO_PinAFConfig(GPIOC, GPIO_PinSource8, GPIO_AF_MCO); - GPIO_PinAFConfig(GPIOC, GPIO_PinSource9, GPIO_AF_MCO); - GPIO_PinAFConfig(GPIOC, GPIO_PinSource10, GPIO_AF_MCO); - GPIO_PinAFConfig(GPIOC, GPIO_PinSource11, GPIO_AF_MCO); - GPIO_PinAFConfig(GPIOC, GPIO_PinSource12, GPIO_AF_MCO); - GPIO_PinAFConfig(GPIOD, GPIO_PinSource2, GPIO_AF_MCO); - - /* Configure PC.08, PC.09, PC.10, PC.11 pins: D0, D1, D2, D3 pins */ - GPIO_InitStructure.GPIO_Pin = GPIO_Pin_8 | GPIO_Pin_9 | GPIO_Pin_10 | GPIO_Pin_11; - GPIO_InitStructure.GPIO_Mode = GPIO_Mode_IN; - GPIO_InitStructure.GPIO_PuPd = GPIO_PuPd_NOPULL; - GPIO_Init(GPIOC, &GPIO_InitStructure); - - /* Configure PD.02 CMD line */ - GPIO_InitStructure.GPIO_Pin = GPIO_Pin_2; - GPIO_Init(GPIOD, &GPIO_InitStructure); - - /* Configure PC.12 pin: CLK pin */ - GPIO_InitStructure.GPIO_Pin = GPIO_Pin_12; - GPIO_Init(GPIOC, &GPIO_InitStructure); -} - -/** - * @brief Initializes the SD Card and put it into StandBy State (Ready for - * data transfer). - * @param None - * @retval None - */ -void SD_LowLevel_Init(void) -{ - GPIO_InitTypeDef GPIO_InitStructure; - - /* GPIOC and GPIOD Periph clock enable */ - RCC_AHB1PeriphClockCmd(RCC_AHB1Periph_GPIOC | RCC_AHB1Periph_GPIOD | SD_DETECT_GPIO_CLK, ENABLE); - - GPIO_PinAFConfig(GPIOC, GPIO_PinSource8, GPIO_AF_SDIO); - GPIO_PinAFConfig(GPIOC, GPIO_PinSource9, GPIO_AF_SDIO); - GPIO_PinAFConfig(GPIOC, GPIO_PinSource10, GPIO_AF_SDIO); - GPIO_PinAFConfig(GPIOC, GPIO_PinSource11, GPIO_AF_SDIO); - GPIO_PinAFConfig(GPIOC, GPIO_PinSource12, GPIO_AF_SDIO); - GPIO_PinAFConfig(GPIOD, GPIO_PinSource2, GPIO_AF_SDIO); - - /* Configure PC.08, PC.09, PC.10, PC.11 pins: D0, D1, D2, D3 pins */ - GPIO_InitStructure.GPIO_Pin = GPIO_Pin_8 | GPIO_Pin_9 | GPIO_Pin_10 | GPIO_Pin_11; - GPIO_InitStructure.GPIO_Speed = GPIO_Speed_25MHz; - GPIO_InitStructure.GPIO_Mode = GPIO_Mode_AF; - GPIO_InitStructure.GPIO_OType = GPIO_OType_PP; - GPIO_InitStructure.GPIO_PuPd = GPIO_PuPd_UP; - GPIO_Init(GPIOC, &GPIO_InitStructure); - - /* Configure PD.02 CMD line */ - GPIO_InitStructure.GPIO_Pin = GPIO_Pin_2; - GPIO_Init(GPIOD, &GPIO_InitStructure); - - /* Configure PC.12 pin: CLK pin */ - GPIO_InitStructure.GPIO_Pin = GPIO_Pin_12; - GPIO_InitStructure.GPIO_PuPd = GPIO_PuPd_NOPULL; - GPIO_Init(GPIOC, &GPIO_InitStructure); - - /*!< Configure SD_SPI_DETECT_PIN pin: SD Card detect pin */ -#if defined(PYBOARD3) - // dpgeorge: PYBv2-v3: switch is normally open, connected to VDD when card inserted - GPIO_InitStructure.GPIO_Pin = SD_DETECT_PIN; - GPIO_InitStructure.GPIO_Speed = GPIO_Speed_2MHz; // needs to be 2MHz due to restrictions on PC13 - GPIO_InitStructure.GPIO_Mode = GPIO_Mode_IN; - GPIO_InitStructure.GPIO_PuPd = GPIO_PuPd_DOWN; - GPIO_Init(SD_DETECT_GPIO_PORT, &GPIO_InitStructure); -#elif defined(PYBOARD4) - // dpgeorge: PYBv4: switch is normally open, connected to GND when card inserted - GPIO_InitStructure.GPIO_Pin = SD_DETECT_PIN; - GPIO_InitStructure.GPIO_Speed = GPIO_Speed_2MHz; - GPIO_InitStructure.GPIO_Mode = GPIO_Mode_IN; - GPIO_InitStructure.GPIO_PuPd = GPIO_PuPd_UP; - GPIO_Init(SD_DETECT_GPIO_PORT, &GPIO_InitStructure); -#endif - - /* Enable the SDIO APB2 Clock */ - RCC_APB2PeriphClockCmd(RCC_APB2Periph_SDIO, ENABLE); - - /* Enable the DMA2 Clock */ - RCC_AHB1PeriphClockCmd(SD_SDIO_DMA_CLK, ENABLE); -} - -/** - * @brief Configures the DMA2 Channel4 for SDIO Tx request. - * @param BufferSRC: pointer to the source buffer - * @param BufferSize: buffer size - * @retval None - */ -void SD_LowLevel_DMA_TxConfig(uint32_t *BufferSRC, uint32_t BufferSize) -{ - DMA_InitTypeDef SDDMA_InitStructure; - - DMA_ClearFlag(SD_SDIO_DMA_STREAM, SD_SDIO_DMA_FLAG_FEIF | SD_SDIO_DMA_FLAG_DMEIF | SD_SDIO_DMA_FLAG_TEIF | SD_SDIO_DMA_FLAG_HTIF | SD_SDIO_DMA_FLAG_TCIF); - - /* DMA2 Stream3 or Stream6 disable */ - DMA_Cmd(SD_SDIO_DMA_STREAM, DISABLE); - - /* DMA2 Stream3 or Stream6 Config */ - DMA_DeInit(SD_SDIO_DMA_STREAM); - - SDDMA_InitStructure.DMA_Channel = SD_SDIO_DMA_CHANNEL; - SDDMA_InitStructure.DMA_PeripheralBaseAddr = (uint32_t)SDIO_FIFO_ADDRESS; - SDDMA_InitStructure.DMA_Memory0BaseAddr = (uint32_t)BufferSRC; - SDDMA_InitStructure.DMA_DIR = DMA_DIR_MemoryToPeripheral; - SDDMA_InitStructure.DMA_BufferSize = BufferSize; - SDDMA_InitStructure.DMA_PeripheralInc = DMA_PeripheralInc_Disable; - SDDMA_InitStructure.DMA_MemoryInc = DMA_MemoryInc_Enable; - SDDMA_InitStructure.DMA_PeripheralDataSize = DMA_PeripheralDataSize_Word; - SDDMA_InitStructure.DMA_MemoryDataSize = DMA_MemoryDataSize_Word; - SDDMA_InitStructure.DMA_Mode = DMA_Mode_Normal; - SDDMA_InitStructure.DMA_Priority = DMA_Priority_VeryHigh; - SDDMA_InitStructure.DMA_FIFOMode = DMA_FIFOMode_Enable; - SDDMA_InitStructure.DMA_FIFOThreshold = DMA_FIFOThreshold_Full; - SDDMA_InitStructure.DMA_MemoryBurst = DMA_MemoryBurst_INC4; - SDDMA_InitStructure.DMA_PeripheralBurst = DMA_PeripheralBurst_INC4; - DMA_Init(SD_SDIO_DMA_STREAM, &SDDMA_InitStructure); - DMA_ITConfig(SD_SDIO_DMA_STREAM, DMA_IT_TC, ENABLE); - DMA_FlowControllerConfig(SD_SDIO_DMA_STREAM, DMA_FlowCtrl_Peripheral); - - /* DMA2 Stream3 or Stream6 enable */ - DMA_Cmd(SD_SDIO_DMA_STREAM, ENABLE); - -} - -/** - * @brief Configures the DMA2 Channel4 for SDIO Rx request. - * @param BufferDST: pointer to the destination buffer - * @param BufferSize: buffer size - * @retval None - */ -void SD_LowLevel_DMA_RxConfig(uint32_t *BufferDST, uint32_t BufferSize) -{ - DMA_InitTypeDef SDDMA_InitStructure; - - DMA_ClearFlag(SD_SDIO_DMA_STREAM, SD_SDIO_DMA_FLAG_FEIF | SD_SDIO_DMA_FLAG_DMEIF | SD_SDIO_DMA_FLAG_TEIF | SD_SDIO_DMA_FLAG_HTIF | SD_SDIO_DMA_FLAG_TCIF); - - /* DMA2 Stream3 or Stream6 disable */ - DMA_Cmd(SD_SDIO_DMA_STREAM, DISABLE); - - /* DMA2 Stream3 or Stream6 Config */ - DMA_DeInit(SD_SDIO_DMA_STREAM); - - SDDMA_InitStructure.DMA_Channel = SD_SDIO_DMA_CHANNEL; - SDDMA_InitStructure.DMA_PeripheralBaseAddr = (uint32_t)SDIO_FIFO_ADDRESS; - SDDMA_InitStructure.DMA_Memory0BaseAddr = (uint32_t)BufferDST; - SDDMA_InitStructure.DMA_DIR = DMA_DIR_PeripheralToMemory; - SDDMA_InitStructure.DMA_BufferSize = BufferSize; - SDDMA_InitStructure.DMA_PeripheralInc = DMA_PeripheralInc_Disable; - SDDMA_InitStructure.DMA_MemoryInc = DMA_MemoryInc_Enable; - SDDMA_InitStructure.DMA_PeripheralDataSize = DMA_PeripheralDataSize_Word; - SDDMA_InitStructure.DMA_MemoryDataSize = DMA_MemoryDataSize_Word; - SDDMA_InitStructure.DMA_Mode = DMA_Mode_Normal; - SDDMA_InitStructure.DMA_Priority = DMA_Priority_VeryHigh; - SDDMA_InitStructure.DMA_FIFOMode = DMA_FIFOMode_Enable; - SDDMA_InitStructure.DMA_FIFOThreshold = DMA_FIFOThreshold_Full; - SDDMA_InitStructure.DMA_MemoryBurst = DMA_MemoryBurst_INC4; - SDDMA_InitStructure.DMA_PeripheralBurst = DMA_PeripheralBurst_INC4; - DMA_Init(SD_SDIO_DMA_STREAM, &SDDMA_InitStructure); - DMA_ITConfig(SD_SDIO_DMA_STREAM, DMA_IT_TC, ENABLE); - DMA_FlowControllerConfig(SD_SDIO_DMA_STREAM, DMA_FlowCtrl_Peripheral); - - /* DMA2 Stream3 or Stream6 enable */ - DMA_Cmd(SD_SDIO_DMA_STREAM, ENABLE); -} - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/stm/lib/stm324x7i_eval.h b/stm/lib/stm324x7i_eval.h deleted file mode 100644 index 9adeecb16..000000000 --- a/stm/lib/stm324x7i_eval.h +++ /dev/null @@ -1,112 +0,0 @@ -/** - ****************************************************************************** - * @file STM324x7i_eval.h - * @author MCD Application Team - * @version V1.0.0 - * @date 11-January-2013 - * @brief This file contains definitions for STM324x7I_EVAL's Leds, push-buttons - * and COM ports hardware resources. - ****************************************************************************** - * @attention - * - *

© COPYRIGHT 2013 STMicroelectronics

- * - * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License"); - * You may not use this file except in compliance with the License. - * You may obtain a copy of the License at: - * - * http://www.st.com/software_license_agreement_liberty_v2 - * - * Unless required by applicable law or agreed to in writing, software - * distributed under the License is distributed on an "AS IS" BASIS, - * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - * See the License for the specific language governing permissions and - * limitations under the License. - * - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM324x7I_EVAL_H -#define __STM324x7I_EVAL_H - -#ifdef __cplusplus - extern "C" { -#endif - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx.h" -#include "mpconfig.h" - -/** - * @brief SD FLASH SDIO Interface - */ -#if defined(PYBOARD3) -#define SD_DETECT_PIN GPIO_Pin_13 /* PC.13 */ -#define SD_DETECT_GPIO_PORT GPIOC /* GPIOC */ -#define SD_DETECT_GPIO_CLK RCC_AHB1Periph_GPIOC -#elif defined(PYBOARD4) -#define SD_DETECT_PIN GPIO_Pin_8 /* PA..8 */ -#define SD_DETECT_GPIO_PORT GPIOA /* GPIOA */ -#define SD_DETECT_GPIO_CLK RCC_AHB1Periph_GPIOA -#elif defined(STM32F4DISC) -// PB15 on the DM-STSTF4BB Base Board -#define SD_DETECT_PIN GPIO_Pin_15 /* PB.15 */ -#define SD_DETECT_GPIO_PORT GPIOB /* GPIOB */ -#define SD_DETECT_GPIO_CLK RCC_AHB1Periph_GPIOB -#endif - -#define SDIO_FIFO_ADDRESS ((uint32_t)0x40012C80) -/** - * @brief SDIO Intialization Frequency (400KHz max) - */ -#define SDIO_INIT_CLK_DIV ((uint8_t)0x76) -/** - * @brief SDIO Data Transfer Frequency (25MHz max) - */ -#define SDIO_TRANSFER_CLK_DIV ((uint8_t)0x0) - -#define SD_SDIO_DMA DMA2 -#define SD_SDIO_DMA_CLK RCC_AHB1Periph_DMA2 - -#define SD_SDIO_DMA_STREAM3 3 -//#define SD_SDIO_DMA_STREAM6 6 - -#ifdef SD_SDIO_DMA_STREAM3 - #define SD_SDIO_DMA_STREAM DMA2_Stream3 - #define SD_SDIO_DMA_CHANNEL DMA_Channel_4 - #define SD_SDIO_DMA_FLAG_FEIF DMA_FLAG_FEIF3 - #define SD_SDIO_DMA_FLAG_DMEIF DMA_FLAG_DMEIF3 - #define SD_SDIO_DMA_FLAG_TEIF DMA_FLAG_TEIF3 - #define SD_SDIO_DMA_FLAG_HTIF DMA_FLAG_HTIF3 - #define SD_SDIO_DMA_FLAG_TCIF DMA_FLAG_TCIF3 - #define SD_SDIO_DMA_IRQn DMA2_Stream3_IRQn - #define SD_SDIO_DMA_IRQHANDLER DMA2_Stream3_IRQHandler -#elif defined SD_SDIO_DMA_STREAM6 - #define SD_SDIO_DMA_STREAM DMA2_Stream6 - #define SD_SDIO_DMA_CHANNEL DMA_Channel_4 - #define SD_SDIO_DMA_FLAG_FEIF DMA_FLAG_FEIF6 - #define SD_SDIO_DMA_FLAG_DMEIF DMA_FLAG_DMEIF6 - #define SD_SDIO_DMA_FLAG_TEIF DMA_FLAG_TEIF6 - #define SD_SDIO_DMA_FLAG_HTIF DMA_FLAG_HTIF6 - #define SD_SDIO_DMA_FLAG_TCIF DMA_FLAG_TCIF6 - #define SD_SDIO_DMA_IRQn DMA2_Stream6_IRQn - #define SD_SDIO_DMA_IRQHANDLER DMA2_Stream6_IRQHandler -#endif /* SD_SDIO_DMA_STREAM3 */ - - -/** @defgroup STM324x7I_EVAL_LOW_LEVEL_Exported_Functions - * @{ - */ -void SD_LowLevel_DeInit(void); -void SD_LowLevel_Init(void); -void SD_LowLevel_DMA_TxConfig(uint32_t *BufferSRC, uint32_t BufferSize); -void SD_LowLevel_DMA_RxConfig(uint32_t *BufferDST, uint32_t BufferSize); - -#ifdef __cplusplus -} -#endif - -#endif /* __STM324x7I_EVAL_H */ - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/stm/lib/stm324x7i_eval_sdio_sd.c b/stm/lib/stm324x7i_eval_sdio_sd.c deleted file mode 100644 index 2d6f4b8c9..000000000 --- a/stm/lib/stm324x7i_eval_sdio_sd.c +++ /dev/null @@ -1,2948 +0,0 @@ -/** - ****************************************************************************** - * @file stm324x7i_eval_sdio_sd.c - * @author MCD Application Team - * @version V1.0.0 - * @date 11-January-2013 - * @brief This file provides a set of functions needed to manage the SDIO SD - * Card memory mounted on STM324x7I-EVAL evaluation board. - * - * @verbatim - * - * =================================================================== - * How to use this driver - * =================================================================== - * It implements a high level communication layer for read and write - * from/to this memory. The needed STM32 hardware resources (SDIO and - * GPIO) are defined in stm324x7i_eval.h file, and the initialization is - * performed in SD_LowLevel_Init() function declared in stm324x7i_eval.c - * file. - * You can easily tailor this driver to any other development board, - * by just adapting the defines for hardware resources and - * SD_LowLevel_Init() function. - * - * A - SD Card Initialization and configuration - * ============================================ - * - To initialize the SD Card, use the SD_Init() function. It - * Initializes the SD Card and put it into StandBy State (Ready - * for data transfer). This function provide the following operations: - * - * 1 - Apply the SD Card initialization process at 400KHz and check - * the SD Card type (Standard Capacity or High Capacity). You - * can change or adapt this frequency by adjusting the - * "SDIO_INIT_CLK_DIV" define inside the stm324x7i_eval.h file. - * The SD Card frequency (SDIO_CK) is computed as follows: - * - * +---------------------------------------------+ - * | SDIO_CK = SDIOCLK / (SDIO_INIT_CLK_DIV + 2) | - * +---------------------------------------------+ - * - * In initialization mode and according to the SD Card standard, - * make sure that the SDIO_CK frequency don't exceed 400KHz. - * - * 2 - Get the SD CID and CSD data. All these information are - * managed by the SDCardInfo structure. This structure provide - * also ready computed SD Card capacity and Block size. - * - * 3 - Configure the SD Card Data transfer frequency. By Default, - * the card transfer frequency is set to 24MHz. You can change - * or adapt this frequency by adjusting the "SDIO_TRANSFER_CLK_DIV" - * define inside the stm324x7i_eval.h file. - * The SD Card frequency (SDIO_CK) is computed as follows: - * - * +---------------------------------------------+ - * | SDIO_CK = SDIOCLK / (SDIO_INIT_CLK_DIV + 2) | - * +---------------------------------------------+ - * - * In transfer mode and according to the SD Card standard, - * make sure that the SDIO_CK frequency don't exceed 25MHz - * and 50MHz in High-speed mode switch. - * To be able to use a frequency higher than 24MHz, you should - * use the SDIO peripheral in bypass mode. Refer to the - * corresponding reference manual for more details. - * - * 4 - Select the corresponding SD Card according to the address - * read with the step 2. - * - * 5 - Configure the SD Card in wide bus mode: 4-bits data. - * - * B - SD Card Read operation - * ========================== - * - You can read SD card by using two function: SD_ReadBlock() and - * SD_ReadMultiBlocks() functions. These functions support only - * 512-byte block length. - * - The SD_ReadBlock() function read only one block (512-byte). This - * function can transfer the data using DMA controller or using - * polling mode. To select between DMA or polling mode refer to - * "SD_DMA_MODE" or "SD_POLLING_MODE" inside the stm324x7i_eval_sdio_sd.h - * file and uncomment the corresponding line. By default the SD DMA - * mode is selected - * - The SD_ReadMultiBlocks() function read only mutli blocks (multiple - * of 512-byte). - * - Any read operation should be followed by two functions to check - * if the DMA Controller and SD Card status. - * - SD_ReadWaitOperation(): this function insure that the DMA - * controller has finished all data transfer. - * - SD_GetStatus(): to check that the SD Card has finished the - * data transfer and it is ready for data. - * - * - The DMA transfer is finished by the SDIO Data End interrupt. - * User has to call the SD_ProcessIRQ() function inside the SDIO_IRQHandler() - * and SD_ProcessDMAIRQ() function inside the DMA2_Streamx_IRQHandler(). - * Don't forget to enable the SDIO_IRQn and DMA2_Stream3_IRQn or - * DMA2_Stream6_IRQn interrupts using the NVIC controller. - * - * C - SD Card Write operation - * =========================== - * - You can write SD card by using two function: SD_WriteBlock() and - * SD_WriteMultiBlocks() functions. These functions support only - * 512-byte block length. - * - The SD_WriteBlock() function write only one block (512-byte). This - * function can transfer the data using DMA controller or using - * polling mode. To select between DMA or polling mode refer to - * "SD_DMA_MODE" or "SD_POLLING_MODE" inside the stm324x7i_eval_sdio_sd.h - * file and uncomment the corresponding line. By default the SD DMA - * mode is selected - * - The SD_WriteMultiBlocks() function write only mutli blocks (multiple - * of 512-byte). - * - Any write operation should be followed by two functions to check - * if the DMA Controller and SD Card status. - * - SD_ReadWaitOperation(): this function insure that the DMA - * controller has finished all data transfer. - * - SD_GetStatus(): to check that the SD Card has finished the - * data transfer and it is ready for data. - * - * - The DMA transfer is finished by the SDIO Data End interrupt. - * User has to call the SD_ProcessIRQ() function inside the SDIO_IRQHandler() - * and SD_ProcessDMAIRQ() function inside the DMA2_Streamx_IRQHandler(). - * Don't forget to enable the SDIO_IRQn and DMA2_Stream3_IRQn or - * DMA2_Stream6_IRQn interrupts using the NVIC controller. - * - * - * D - SD card status - * ================== - * - At any time, you can check the SD Card status and get the SD card - * state by using the SD_GetStatus() function. This function checks - * first if the SD card is still connected and then get the internal - * SD Card transfer state. - * - You can also get the SD card SD Status register by using the - * SD_SendSDStatus() function. - * - * E - Programming Model (Selecting DMA for SDIO data Transfer) - * ============================================================ - * Status = SD_Init(); // Initialization Step as described in section A - * - * // SDIO Interrupt ENABLE - * NVIC_InitStructure.NVIC_IRQChannel = SDIO_IRQn; - * NVIC_InitStructure.NVIC_IRQChannelPreemptionPriority = 0; - * NVIC_InitStructure.NVIC_IRQChannelSubPriority = 0; - * NVIC_InitStructure.NVIC_IRQChannelCmd = ENABLE; - * NVIC_Init(&NVIC_InitStructure); - * // DMA2 STREAMx Interrupt ENABLE - * NVIC_InitStructure.NVIC_IRQChannel = SD_SDIO_DMA_IRQn; - * NVIC_InitStructure.NVIC_IRQChannelPreemptionPriority = 1; - * NVIC_Init(&NVIC_InitStructure); - * - * // Write operation as described in Section C - * Status = SD_WriteBlock(buffer, address, 512); - * Status = SD_WaitWriteOperation(); - * while(SD_GetStatus() != SD_TRANSFER_OK); - * - * Status = SD_WriteMultiBlocks(buffer, address, 512, NUMBEROFBLOCKS); - * Status = SD_WaitWriteOperation(); - * while(SD_GetStatus() != SD_TRANSFER_OK); - * - * // Read operation as described in Section B - * Status = SD_ReadBlock(buffer, address, 512); - * Status = SD_WaitReadOperation(); - * while(SD_GetStatus() != SD_TRANSFER_OK); - * - * Status = SD_ReadMultiBlocks(buffer, address, 512, NUMBEROFBLOCKS); - * Status = SD_WaitReadOperation(); - * while(SD_GetStatus() != SD_TRANSFER_OK); - * - * - Add the SDIO and DMA2 StreamX (3 or 6) IRQ Handlers: - * void SDIO_IRQHandler(void) - * { - * SD_ProcessIRQ(); - * } - * void SD_SDIO_DMA_IRQHANDLER(void) - * { - * SD_ProcessDMAIRQ(); - * } - * - * F - Programming Model (Selecting Polling for SDIO data Transfer) - * ================================================================ - * //Only SD Card Single Block operation are managed. - * Status = SD_Init(); // Initialization Step as described in section - * - * // Write operation as described in Section C - * Status = SD_WriteBlock(buffer, address, 512); - * - * // Read operation as described in Section B - * Status = SD_ReadBlock(buffer, address, 512); - * - * STM32 SDIO Pin assignment - * ========================= - * +-----------------------------------------------------------+ - * | Pin assignment | - * +-----------------------------+---------------+-------------+ - * | STM32 SDIO Pins | SD | Pin | - * +-----------------------------+---------------+-------------+ - * | SDIO D2 | D2 | 1 | - * | SDIO D3 | D3 | 2 | - * | SDIO CMD | CMD | 3 | - * | | VCC | 4 (3.3 V)| - * | SDIO CLK | CLK | 5 | - * | | GND | 6 (0 V) | - * | SDIO D0 | D0 | 7 | - * | SDIO D1 | D1 | 8 | - * +-----------------------------+---------------+-------------+ - * - * @endverbatim - * - ****************************************************************************** - * @attention - * - *

© COPYRIGHT 2013 STMicroelectronics

- * - * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License"); - * You may not use this file except in compliance with the License. - * You may obtain a copy of the License at: - * - * http://www.st.com/software_license_agreement_liberty_v2 - * - * Unless required by applicable law or agreed to in writing, software - * distributed under the License is distributed on an "AS IS" BASIS, - * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - * See the License for the specific language governing permissions and - * limitations under the License. - * - ****************************************************************************** - */ - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx_dma.h" -#include "stm32f4xx_gpio.h" -#include "stm32f4xx_sdio.h" -#include "stm324x7i_eval_sdio_sd.h" -//#include "std.h" - - -/** @addtogroup Utilities - * @{ - */ - -/** @addtogroup STM32_EVAL - * @{ - */ - -/** @addtogroup STM324x7I_EVAL - * @{ - */ - -/** @addtogroup STM324x7I_EVAL_SDIO_SD - * @brief This file provides all the SD Card driver firmware functions. - * @{ - */ - -/** @defgroup STM324x7I_EVAL_SDIO_SD_Private_Types - * @{ - */ -/** - * @} - */ - - -/** @defgroup stm324x7i_EVAL_SDIO_SD_Private_Defines - * @{ - */ - -/** - * @brief SDIO Static flags, TimeOut, FIFO Address - */ -#define NULL 0 -#define SDIO_STATIC_FLAGS ((uint32_t)0x000005FF) -#define SDIO_CMD0TIMEOUT ((uint32_t)0x00080000) // dpgeorge: was 0x10000 - -/** - * @brief Mask for errors Card Status R1 (OCR Register) - */ -#define SD_OCR_ADDR_OUT_OF_RANGE ((uint32_t)0x80000000) -#define SD_OCR_ADDR_MISALIGNED ((uint32_t)0x40000000) -#define SD_OCR_BLOCK_LEN_ERR ((uint32_t)0x20000000) -#define SD_OCR_ERASE_SEQ_ERR ((uint32_t)0x10000000) -#define SD_OCR_BAD_ERASE_PARAM ((uint32_t)0x08000000) -#define SD_OCR_WRITE_PROT_VIOLATION ((uint32_t)0x04000000) -#define SD_OCR_LOCK_UNLOCK_FAILED ((uint32_t)0x01000000) -#define SD_OCR_COM_CRC_FAILED ((uint32_t)0x00800000) -#define SD_OCR_ILLEGAL_CMD ((uint32_t)0x00400000) -#define SD_OCR_CARD_ECC_FAILED ((uint32_t)0x00200000) -#define SD_OCR_CC_ERROR ((uint32_t)0x00100000) -#define SD_OCR_GENERAL_UNKNOWN_ERROR ((uint32_t)0x00080000) -#define SD_OCR_STREAM_READ_UNDERRUN ((uint32_t)0x00040000) -#define SD_OCR_STREAM_WRITE_OVERRUN ((uint32_t)0x00020000) -#define SD_OCR_CID_CSD_OVERWRIETE ((uint32_t)0x00010000) -#define SD_OCR_WP_ERASE_SKIP ((uint32_t)0x00008000) -#define SD_OCR_CARD_ECC_DISABLED ((uint32_t)0x00004000) -#define SD_OCR_ERASE_RESET ((uint32_t)0x00002000) -#define SD_OCR_AKE_SEQ_ERROR ((uint32_t)0x00000008) -#define SD_OCR_ERRORBITS ((uint32_t)0xFDFFE008) - -/** - * @brief Masks for R6 Response - */ -#define SD_R6_GENERAL_UNKNOWN_ERROR ((uint32_t)0x00002000) -#define SD_R6_ILLEGAL_CMD ((uint32_t)0x00004000) -#define SD_R6_COM_CRC_FAILED ((uint32_t)0x00008000) - -#define SD_VOLTAGE_WINDOW_SD ((uint32_t)0x80100000) -#define SD_HIGH_CAPACITY ((uint32_t)0x40000000) -#define SD_STD_CAPACITY ((uint32_t)0x00000000) -#define SD_CHECK_PATTERN ((uint32_t)0x000001AA) - -#define SD_MAX_VOLT_TRIAL ((uint32_t)0x0000FFFF) -#define SD_ALLZERO ((uint32_t)0x00000000) - -#define SD_WIDE_BUS_SUPPORT ((uint32_t)0x00040000) -#define SD_SINGLE_BUS_SUPPORT ((uint32_t)0x00010000) -#define SD_CARD_LOCKED ((uint32_t)0x02000000) - -#define SD_DATATIMEOUT ((uint32_t)0xFFFFFFFF) -#define SD_0TO7BITS ((uint32_t)0x000000FF) -#define SD_8TO15BITS ((uint32_t)0x0000FF00) -#define SD_16TO23BITS ((uint32_t)0x00FF0000) -#define SD_24TO31BITS ((uint32_t)0xFF000000) -#define SD_MAX_DATA_LENGTH ((uint32_t)0x01FFFFFF) - -#define SD_HALFFIFO ((uint32_t)0x00000008) -#define SD_HALFFIFOBYTES ((uint32_t)0x00000020) - -/** - * @brief Command Class Supported - */ -#define SD_CCCC_LOCK_UNLOCK ((uint32_t)0x00000080) -#define SD_CCCC_WRITE_PROT ((uint32_t)0x00000040) -#define SD_CCCC_ERASE ((uint32_t)0x00000020) - -/** - * @brief Following commands are SD Card Specific commands. - * SDIO_APP_CMD should be sent before sending these commands. - */ -#define SDIO_SEND_IF_COND ((uint32_t)0x00000008) - -/** - * @} - */ - -/** @defgroup STM324x7I_EVAL_SDIO_SD_Private_Macros - * @{ - */ -/** - * @} - */ - -/** @defgroup STM324x7I_EVAL_SDIO_SD_Private_Variables - * @{ - */ - -static uint32_t CardType = SDIO_STD_CAPACITY_SD_CARD_V1_1; -static uint32_t CSD_Tab[4], CID_Tab[4], RCA = 0; -static uint8_t SDSTATUS_Tab[16]; -__IO uint32_t StopCondition = 0; -__IO SD_Error TransferError = SD_OK; -__IO uint32_t TransferEnd = 0, DMAEndOfTransfer = 0; -SD_CardInfo SDCardInfo; - -SDIO_InitTypeDef SDIO_InitStructure; -SDIO_CmdInitTypeDef SDIO_CmdInitStructure; -SDIO_DataInitTypeDef SDIO_DataInitStructure; -/** - * @} - */ - - -/** @defgroup STM324x7I_EVAL_SDIO_SD_Private_Function_Prototypes - * @{ - */ -static SD_Error CmdError(void); -static SD_Error CmdResp1Error(uint8_t cmd); -static SD_Error CmdResp7Error(void); -static SD_Error CmdResp3Error(void); -static SD_Error CmdResp2Error(void); -static SD_Error CmdResp6Error(uint8_t cmd, uint16_t *prca); -static SD_Error SDEnWideBus(FunctionalState NewState); -static SD_Error IsCardProgramming(uint8_t *pstatus); -static SD_Error FindSCR(uint16_t rca, uint32_t *pscr); -uint8_t convert_from_bytes_to_power_of_two(uint16_t NumberOfBytes); - -/** - * @} - */ - - -/** @defgroup STM324x7I_EVAL_SDIO_SD_Private_Functions - * @{ - */ - -/** - * @brief DeInitializes the SDIO interface. - * @param None - * @retval None - */ -void SD_DeInit(void) -{ - SD_LowLevel_DeInit(); -} - -/** - * @brief Initializes the SD Card and put it into StandBy State (Ready for data - * transfer). - * @param None - * @retval SD_Error: SD Card Error code. - */ -SD_Error SD_Init(void) -{ - __IO SD_Error errorstatus = SD_OK; - - /* SDIO Peripheral Low Level Init */ - SD_LowLevel_Init(); - - SDIO_DeInit(); - - errorstatus = SD_PowerON(); - - if (errorstatus != SD_OK) - { - /*!< CMD Response TimeOut (wait for CMDSENT flag) */ - return(errorstatus); - } - - errorstatus = SD_InitializeCards(); - - if (errorstatus != SD_OK) - { - /*!< CMD Response TimeOut (wait for CMDSENT flag) */ - return(errorstatus); - } - - /*!< Configure the SDIO peripheral */ - /*!< SDIO_CK = SDIOCLK / (SDIO_TRANSFER_CLK_DIV + 2) */ - /*!< on STM32F4xx devices, SDIOCLK is fixed to 48MHz */ - SDIO_InitStructure.SDIO_ClockDiv = SDIO_TRANSFER_CLK_DIV; - SDIO_InitStructure.SDIO_ClockEdge = SDIO_ClockEdge_Rising; - SDIO_InitStructure.SDIO_ClockBypass = SDIO_ClockBypass_Disable; - SDIO_InitStructure.SDIO_ClockPowerSave = SDIO_ClockPowerSave_Disable; - SDIO_InitStructure.SDIO_BusWide = SDIO_BusWide_1b; - SDIO_InitStructure.SDIO_HardwareFlowControl = SDIO_HardwareFlowControl_Disable; - SDIO_Init(&SDIO_InitStructure); - - /*----------------- Read CSD/CID MSD registers ------------------*/ - errorstatus = SD_GetCardInfo(&SDCardInfo); - - if (errorstatus == SD_OK) - { - /*----------------- Select Card --------------------------------*/ - errorstatus = SD_SelectDeselect((uint32_t) (SDCardInfo.RCA << 16)); - } - - if (errorstatus == SD_OK) - { - errorstatus = SD_EnableWideBusOperation(SDIO_BusWide_4b); - } - - return(errorstatus); -} - -/** - * @brief Gets the cuurent sd card data transfer status. - * @param None - * @retval SDTransferState: Data Transfer state. - * This value can be: - * - SD_TRANSFER_OK: No data transfer is acting - * - SD_TRANSFER_BUSY: Data transfer is acting - */ -SDTransferState SD_GetStatus(void) -{ - SDCardState cardstate = SD_CARD_TRANSFER; - - cardstate = SD_GetState(); - - if (cardstate == SD_CARD_TRANSFER) - { - return(SD_TRANSFER_OK); - } - else if(cardstate == SD_CARD_ERROR) - { - return (SD_TRANSFER_ERROR); - } - else - { - return(SD_TRANSFER_BUSY); - } -} - -/** - * @brief Returns the current card's state. - * @param None - * @retval SDCardState: SD Card Error or SD Card Current State. - */ -SDCardState SD_GetState(void) -{ - uint32_t resp1 = 0; - - if(SD_Detect()== SD_PRESENT) - { - if (SD_SendStatus(&resp1) != SD_OK) - { - return SD_CARD_ERROR; - } - else - { - return (SDCardState)((resp1 >> 9) & 0x0F); - } - } - else - { - return SD_CARD_ERROR; - } -} - -/** - * @brief Detect if SD card is correctly plugged in the memory slot. - * @param None - * @retval Return if SD is detected or not - */ -uint8_t SD_Detect(void) -{ - __IO uint8_t status = SD_PRESENT; - - /*!< Check GPIO to detect SD */ -#if defined(PYBOARD3) - if (GPIO_ReadInputDataBit(SD_DETECT_GPIO_PORT, SD_DETECT_PIN) != Bit_SET) -#elif defined(PYBOARD4) - if (GPIO_ReadInputDataBit(SD_DETECT_GPIO_PORT, SD_DETECT_PIN) == Bit_SET) -#endif - { - status = SD_NOT_PRESENT; - } - return status; -} - -/** - * @brief Enquires cards about their operating voltage and configures - * clock controls. - * @param None - * @retval SD_Error: SD Card Error code. - */ -SD_Error SD_PowerON(void) -{ - __IO SD_Error errorstatus = SD_OK; - uint32_t response = 0, count = 0, validvoltage = 0; - uint32_t SDType = SD_STD_CAPACITY; - - /*!< Power ON Sequence -----------------------------------------------------*/ - /*!< Configure the SDIO peripheral */ - /*!< SDIO_CK = SDIOCLK / (SDIO_INIT_CLK_DIV + 2) */ - /*!< on STM32F4xx devices, SDIOCLK is fixed to 48MHz */ - /*!< SDIO_CK for initialization should not exceed 400 KHz */ - SDIO_InitStructure.SDIO_ClockDiv = SDIO_INIT_CLK_DIV; - SDIO_InitStructure.SDIO_ClockEdge = SDIO_ClockEdge_Rising; - SDIO_InitStructure.SDIO_ClockBypass = SDIO_ClockBypass_Disable; - SDIO_InitStructure.SDIO_ClockPowerSave = SDIO_ClockPowerSave_Disable; - SDIO_InitStructure.SDIO_BusWide = SDIO_BusWide_1b; - SDIO_InitStructure.SDIO_HardwareFlowControl = SDIO_HardwareFlowControl_Disable; - SDIO_Init(&SDIO_InitStructure); - - /*!< Set Power State to ON */ - SDIO_SetPowerState(SDIO_PowerState_ON); - - /*!< Enable SDIO Clock */ - SDIO_ClockCmd(ENABLE); - - /*!< CMD0: GO_IDLE_STATE ---------------------------------------------------*/ - /*!< No CMD response required */ - SDIO_CmdInitStructure.SDIO_Argument = 0x0; - SDIO_CmdInitStructure.SDIO_CmdIndex = SD_CMD_GO_IDLE_STATE; - SDIO_CmdInitStructure.SDIO_Response = SDIO_Response_No; - SDIO_CmdInitStructure.SDIO_Wait = SDIO_Wait_No; - SDIO_CmdInitStructure.SDIO_CPSM = SDIO_CPSM_Enable; - SDIO_SendCommand(&SDIO_CmdInitStructure); - - errorstatus = CmdError(); - - if (errorstatus != SD_OK) - { - /*!< CMD Response TimeOut (wait for CMDSENT flag) */ - return(errorstatus); - } - - /*!< CMD8: SEND_IF_COND ----------------------------------------------------*/ - /*!< Send CMD8 to verify SD card interface operating condition */ - /*!< Argument: - [31:12]: Reserved (shall be set to '0') - - [11:8]: Supply Voltage (VHS) 0x1 (Range: 2.7-3.6 V) - - [7:0]: Check Pattern (recommended 0xAA) */ - /*!< CMD Response: R7 */ - SDIO_CmdInitStructure.SDIO_Argument = SD_CHECK_PATTERN; - SDIO_CmdInitStructure.SDIO_CmdIndex = SDIO_SEND_IF_COND; - SDIO_CmdInitStructure.SDIO_Response = SDIO_Response_Short; - SDIO_CmdInitStructure.SDIO_Wait = SDIO_Wait_No; - SDIO_CmdInitStructure.SDIO_CPSM = SDIO_CPSM_Enable; - SDIO_SendCommand(&SDIO_CmdInitStructure); - - errorstatus = CmdResp7Error(); - - if (errorstatus == SD_OK) - { - CardType = SDIO_STD_CAPACITY_SD_CARD_V2_0; /*!< SD Card 2.0 */ - SDType = SD_HIGH_CAPACITY; - } - else - { - /*!< CMD55 */ - SDIO_CmdInitStructure.SDIO_Argument = 0x00; - SDIO_CmdInitStructure.SDIO_CmdIndex = SD_CMD_APP_CMD; - SDIO_CmdInitStructure.SDIO_Response = SDIO_Response_Short; - SDIO_CmdInitStructure.SDIO_Wait = SDIO_Wait_No; - SDIO_CmdInitStructure.SDIO_CPSM = SDIO_CPSM_Enable; - SDIO_SendCommand(&SDIO_CmdInitStructure); - errorstatus = CmdResp1Error(SD_CMD_APP_CMD); - } - /*!< CMD55 */ - SDIO_CmdInitStructure.SDIO_Argument = 0x00; - SDIO_CmdInitStructure.SDIO_CmdIndex = SD_CMD_APP_CMD; - SDIO_CmdInitStructure.SDIO_Response = SDIO_Response_Short; - SDIO_CmdInitStructure.SDIO_Wait = SDIO_Wait_No; - SDIO_CmdInitStructure.SDIO_CPSM = SDIO_CPSM_Enable; - SDIO_SendCommand(&SDIO_CmdInitStructure); - errorstatus = CmdResp1Error(SD_CMD_APP_CMD); - - /*!< If errorstatus is Command TimeOut, it is a MMC card */ - /*!< If errorstatus is SD_OK it is a SD card: SD card 2.0 (voltage range mismatch) - or SD card 1.x */ - if (errorstatus == SD_OK) - { - /*!< SD CARD */ - /*!< Send ACMD41 SD_APP_OP_COND with Argument 0x80100000 */ - while ((!validvoltage) && (count < SD_MAX_VOLT_TRIAL)) - { - - /*!< SEND CMD55 APP_CMD with RCA as 0 */ - SDIO_CmdInitStructure.SDIO_Argument = 0x00; - SDIO_CmdInitStructure.SDIO_CmdIndex = SD_CMD_APP_CMD; - SDIO_CmdInitStructure.SDIO_Response = SDIO_Response_Short; - SDIO_CmdInitStructure.SDIO_Wait = SDIO_Wait_No; - SDIO_CmdInitStructure.SDIO_CPSM = SDIO_CPSM_Enable; - SDIO_SendCommand(&SDIO_CmdInitStructure); - - errorstatus = CmdResp1Error(SD_CMD_APP_CMD); - - if (errorstatus != SD_OK) - { - return(errorstatus); - } - SDIO_CmdInitStructure.SDIO_Argument = SD_VOLTAGE_WINDOW_SD | SDType; - SDIO_CmdInitStructure.SDIO_CmdIndex = SD_CMD_SD_APP_OP_COND; - SDIO_CmdInitStructure.SDIO_Response = SDIO_Response_Short; - SDIO_CmdInitStructure.SDIO_Wait = SDIO_Wait_No; - SDIO_CmdInitStructure.SDIO_CPSM = SDIO_CPSM_Enable; - SDIO_SendCommand(&SDIO_CmdInitStructure); - - errorstatus = CmdResp3Error(); - if (errorstatus != SD_OK) - { - return(errorstatus); - } - - response = SDIO_GetResponse(SDIO_RESP1); - validvoltage = (((response >> 31) == 1) ? 1 : 0); - count++; - } - if (count >= SD_MAX_VOLT_TRIAL) - { - errorstatus = SD_INVALID_VOLTRANGE; - return(errorstatus); - } - - if (response &= SD_HIGH_CAPACITY) - { - CardType = SDIO_HIGH_CAPACITY_SD_CARD; - } - - }/*!< else MMC Card */ - - return(errorstatus); -} - -/** - * @brief Turns the SDIO output signals off. - * @param None - * @retval SD_Error: SD Card Error code. - */ -SD_Error SD_PowerOFF(void) -{ - SD_Error errorstatus = SD_OK; - - /*!< Set Power State to OFF */ - SDIO_SetPowerState(SDIO_PowerState_OFF); - - return(errorstatus); -} - -/** - * @brief Intialises all cards or single card as the case may be Card(s) come - * into standby state. - * @param None - * @retval SD_Error: SD Card Error code. - */ -SD_Error SD_InitializeCards(void) -{ - SD_Error errorstatus = SD_OK; - uint16_t rca = 0x01; - - if (SDIO_GetPowerState() == SDIO_PowerState_OFF) - { - errorstatus = SD_REQUEST_NOT_APPLICABLE; - return(errorstatus); - } - - if (SDIO_SECURE_DIGITAL_IO_CARD != CardType) - { - /*!< Send CMD2 ALL_SEND_CID */ - SDIO_CmdInitStructure.SDIO_Argument = 0x0; - SDIO_CmdInitStructure.SDIO_CmdIndex = SD_CMD_ALL_SEND_CID; - SDIO_CmdInitStructure.SDIO_Response = SDIO_Response_Long; - SDIO_CmdInitStructure.SDIO_Wait = SDIO_Wait_No; - SDIO_CmdInitStructure.SDIO_CPSM = SDIO_CPSM_Enable; - SDIO_SendCommand(&SDIO_CmdInitStructure); - - errorstatus = CmdResp2Error(); - - if (SD_OK != errorstatus) - { - return(errorstatus); - } - - CID_Tab[0] = SDIO_GetResponse(SDIO_RESP1); - CID_Tab[1] = SDIO_GetResponse(SDIO_RESP2); - CID_Tab[2] = SDIO_GetResponse(SDIO_RESP3); - CID_Tab[3] = SDIO_GetResponse(SDIO_RESP4); - } - if ((SDIO_STD_CAPACITY_SD_CARD_V1_1 == CardType) || (SDIO_STD_CAPACITY_SD_CARD_V2_0 == CardType) || (SDIO_SECURE_DIGITAL_IO_COMBO_CARD == CardType) - || (SDIO_HIGH_CAPACITY_SD_CARD == CardType)) - { - /*!< Send CMD3 SET_REL_ADDR with argument 0 */ - /*!< SD Card publishes its RCA. */ - SDIO_CmdInitStructure.SDIO_Argument = 0x00; - SDIO_CmdInitStructure.SDIO_CmdIndex = SD_CMD_SET_REL_ADDR; - SDIO_CmdInitStructure.SDIO_Response = SDIO_Response_Short; - SDIO_CmdInitStructure.SDIO_Wait = SDIO_Wait_No; - SDIO_CmdInitStructure.SDIO_CPSM = SDIO_CPSM_Enable; - SDIO_SendCommand(&SDIO_CmdInitStructure); - - errorstatus = CmdResp6Error(SD_CMD_SET_REL_ADDR, &rca); - - if (SD_OK != errorstatus) - { - return(errorstatus); - } - } - - if (SDIO_SECURE_DIGITAL_IO_CARD != CardType) - { - RCA = rca; - - /*!< Send CMD9 SEND_CSD with argument as card's RCA */ - SDIO_CmdInitStructure.SDIO_Argument = (uint32_t)(rca << 16); - SDIO_CmdInitStructure.SDIO_CmdIndex = SD_CMD_SEND_CSD; - SDIO_CmdInitStructure.SDIO_Response = SDIO_Response_Long; - SDIO_CmdInitStructure.SDIO_Wait = SDIO_Wait_No; - SDIO_CmdInitStructure.SDIO_CPSM = SDIO_CPSM_Enable; - SDIO_SendCommand(&SDIO_CmdInitStructure); - - errorstatus = CmdResp2Error(); - - if (SD_OK != errorstatus) - { - return(errorstatus); - } - - CSD_Tab[0] = SDIO_GetResponse(SDIO_RESP1); - CSD_Tab[1] = SDIO_GetResponse(SDIO_RESP2); - CSD_Tab[2] = SDIO_GetResponse(SDIO_RESP3); - CSD_Tab[3] = SDIO_GetResponse(SDIO_RESP4); - } - - errorstatus = SD_OK; /*!< All cards get intialized */ - - return(errorstatus); -} - -/** - * @brief Returns information about specific card. - * @param cardinfo: pointer to a SD_CardInfo structure that contains all SD card - * information. - * @retval SD_Error: SD Card Error code. - */ -SD_Error SD_GetCardInfo(SD_CardInfo *cardinfo) -{ - SD_Error errorstatus = SD_OK; - uint8_t tmp = 0; - - cardinfo->CardType = (uint8_t)CardType; - cardinfo->RCA = (uint16_t)RCA; - - /*!< Byte 0 */ - tmp = (uint8_t)((CSD_Tab[0] & 0xFF000000) >> 24); - cardinfo->SD_csd.CSDStruct = (tmp & 0xC0) >> 6; - cardinfo->SD_csd.SysSpecVersion = (tmp & 0x3C) >> 2; - cardinfo->SD_csd.Reserved1 = tmp & 0x03; - - /*!< Byte 1 */ - tmp = (uint8_t)((CSD_Tab[0] & 0x00FF0000) >> 16); - cardinfo->SD_csd.TAAC = tmp; - - /*!< Byte 2 */ - tmp = (uint8_t)((CSD_Tab[0] & 0x0000FF00) >> 8); - cardinfo->SD_csd.NSAC = tmp; - - /*!< Byte 3 */ - tmp = (uint8_t)(CSD_Tab[0] & 0x000000FF); - cardinfo->SD_csd.MaxBusClkFrec = tmp; - - /*!< Byte 4 */ - tmp = (uint8_t)((CSD_Tab[1] & 0xFF000000) >> 24); - cardinfo->SD_csd.CardComdClasses = tmp << 4; - - /*!< Byte 5 */ - tmp = (uint8_t)((CSD_Tab[1] & 0x00FF0000) >> 16); - cardinfo->SD_csd.CardComdClasses |= (tmp & 0xF0) >> 4; - cardinfo->SD_csd.RdBlockLen = tmp & 0x0F; - - /*!< Byte 6 */ - tmp = (uint8_t)((CSD_Tab[1] & 0x0000FF00) >> 8); - cardinfo->SD_csd.PartBlockRead = (tmp & 0x80) >> 7; - cardinfo->SD_csd.WrBlockMisalign = (tmp & 0x40) >> 6; - cardinfo->SD_csd.RdBlockMisalign = (tmp & 0x20) >> 5; - cardinfo->SD_csd.DSRImpl = (tmp & 0x10) >> 4; - cardinfo->SD_csd.Reserved2 = 0; /*!< Reserved */ - - if ((CardType == SDIO_STD_CAPACITY_SD_CARD_V1_1) || (CardType == SDIO_STD_CAPACITY_SD_CARD_V2_0)) - { - cardinfo->SD_csd.DeviceSize = (tmp & 0x03) << 10; - - /*!< Byte 7 */ - tmp = (uint8_t)(CSD_Tab[1] & 0x000000FF); - cardinfo->SD_csd.DeviceSize |= (tmp) << 2; - - /*!< Byte 8 */ - tmp = (uint8_t)((CSD_Tab[2] & 0xFF000000) >> 24); - cardinfo->SD_csd.DeviceSize |= (tmp & 0xC0) >> 6; - - cardinfo->SD_csd.MaxRdCurrentVDDMin = (tmp & 0x38) >> 3; - cardinfo->SD_csd.MaxRdCurrentVDDMax = (tmp & 0x07); - - /*!< Byte 9 */ - tmp = (uint8_t)((CSD_Tab[2] & 0x00FF0000) >> 16); - cardinfo->SD_csd.MaxWrCurrentVDDMin = (tmp & 0xE0) >> 5; - cardinfo->SD_csd.MaxWrCurrentVDDMax = (tmp & 0x1C) >> 2; - cardinfo->SD_csd.DeviceSizeMul = (tmp & 0x03) << 1; - /*!< Byte 10 */ - tmp = (uint8_t)((CSD_Tab[2] & 0x0000FF00) >> 8); - cardinfo->SD_csd.DeviceSizeMul |= (tmp & 0x80) >> 7; - - cardinfo->CardCapacity = (cardinfo->SD_csd.DeviceSize + 1) ; - cardinfo->CardCapacity *= (1 << (cardinfo->SD_csd.DeviceSizeMul + 2)); - cardinfo->CardBlockSize = 1 << (cardinfo->SD_csd.RdBlockLen); - cardinfo->CardCapacity *= cardinfo->CardBlockSize; - } - else if (CardType == SDIO_HIGH_CAPACITY_SD_CARD) - { - /*!< Byte 7 */ - tmp = (uint8_t)(CSD_Tab[1] & 0x000000FF); - cardinfo->SD_csd.DeviceSize = (tmp & 0x3F) << 16; - - /*!< Byte 8 */ - tmp = (uint8_t)((CSD_Tab[2] & 0xFF000000) >> 24); - - cardinfo->SD_csd.DeviceSize |= (tmp << 8); - - /*!< Byte 9 */ - tmp = (uint8_t)((CSD_Tab[2] & 0x00FF0000) >> 16); - - cardinfo->SD_csd.DeviceSize |= (tmp); - - /*!< Byte 10 */ - tmp = (uint8_t)((CSD_Tab[2] & 0x0000FF00) >> 8); - - cardinfo->CardCapacity = ((uint64_t)cardinfo->SD_csd.DeviceSize + 1) * 512 * 1024; - cardinfo->CardBlockSize = 512; - } - - - cardinfo->SD_csd.EraseGrSize = (tmp & 0x40) >> 6; - cardinfo->SD_csd.EraseGrMul = (tmp & 0x3F) << 1; - - /*!< Byte 11 */ - tmp = (uint8_t)(CSD_Tab[2] & 0x000000FF); - cardinfo->SD_csd.EraseGrMul |= (tmp & 0x80) >> 7; - cardinfo->SD_csd.WrProtectGrSize = (tmp & 0x7F); - - /*!< Byte 12 */ - tmp = (uint8_t)((CSD_Tab[3] & 0xFF000000) >> 24); - cardinfo->SD_csd.WrProtectGrEnable = (tmp & 0x80) >> 7; - cardinfo->SD_csd.ManDeflECC = (tmp & 0x60) >> 5; - cardinfo->SD_csd.WrSpeedFact = (tmp & 0x1C) >> 2; - cardinfo->SD_csd.MaxWrBlockLen = (tmp & 0x03) << 2; - - /*!< Byte 13 */ - tmp = (uint8_t)((CSD_Tab[3] & 0x00FF0000) >> 16); - cardinfo->SD_csd.MaxWrBlockLen |= (tmp & 0xC0) >> 6; - cardinfo->SD_csd.WriteBlockPaPartial = (tmp & 0x20) >> 5; - cardinfo->SD_csd.Reserved3 = 0; - cardinfo->SD_csd.ContentProtectAppli = (tmp & 0x01); - - /*!< Byte 14 */ - tmp = (uint8_t)((CSD_Tab[3] & 0x0000FF00) >> 8); - cardinfo->SD_csd.FileFormatGrouop = (tmp & 0x80) >> 7; - cardinfo->SD_csd.CopyFlag = (tmp & 0x40) >> 6; - cardinfo->SD_csd.PermWrProtect = (tmp & 0x20) >> 5; - cardinfo->SD_csd.TempWrProtect = (tmp & 0x10) >> 4; - cardinfo->SD_csd.FileFormat = (tmp & 0x0C) >> 2; - cardinfo->SD_csd.ECC = (tmp & 0x03); - - /*!< Byte 15 */ - tmp = (uint8_t)(CSD_Tab[3] & 0x000000FF); - cardinfo->SD_csd.CSD_CRC = (tmp & 0xFE) >> 1; - cardinfo->SD_csd.Reserved4 = 1; - - - /*!< Byte 0 */ - tmp = (uint8_t)((CID_Tab[0] & 0xFF000000) >> 24); - cardinfo->SD_cid.ManufacturerID = tmp; - - /*!< Byte 1 */ - tmp = (uint8_t)((CID_Tab[0] & 0x00FF0000) >> 16); - cardinfo->SD_cid.OEM_AppliID = tmp << 8; - - /*!< Byte 2 */ - tmp = (uint8_t)((CID_Tab[0] & 0x000000FF00) >> 8); - cardinfo->SD_cid.OEM_AppliID |= tmp; - - /*!< Byte 3 */ - tmp = (uint8_t)(CID_Tab[0] & 0x000000FF); - cardinfo->SD_cid.ProdName1 = tmp << 24; - - /*!< Byte 4 */ - tmp = (uint8_t)((CID_Tab[1] & 0xFF000000) >> 24); - cardinfo->SD_cid.ProdName1 |= tmp << 16; - - /*!< Byte 5 */ - tmp = (uint8_t)((CID_Tab[1] & 0x00FF0000) >> 16); - cardinfo->SD_cid.ProdName1 |= tmp << 8; - - /*!< Byte 6 */ - tmp = (uint8_t)((CID_Tab[1] & 0x0000FF00) >> 8); - cardinfo->SD_cid.ProdName1 |= tmp; - - /*!< Byte 7 */ - tmp = (uint8_t)(CID_Tab[1] & 0x000000FF); - cardinfo->SD_cid.ProdName2 = tmp; - - /*!< Byte 8 */ - tmp = (uint8_t)((CID_Tab[2] & 0xFF000000) >> 24); - cardinfo->SD_cid.ProdRev = tmp; - - /*!< Byte 9 */ - tmp = (uint8_t)((CID_Tab[2] & 0x00FF0000) >> 16); - cardinfo->SD_cid.ProdSN = tmp << 24; - - /*!< Byte 10 */ - tmp = (uint8_t)((CID_Tab[2] & 0x0000FF00) >> 8); - cardinfo->SD_cid.ProdSN |= tmp << 16; - - /*!< Byte 11 */ - tmp = (uint8_t)(CID_Tab[2] & 0x000000FF); - cardinfo->SD_cid.ProdSN |= tmp << 8; - - /*!< Byte 12 */ - tmp = (uint8_t)((CID_Tab[3] & 0xFF000000) >> 24); - cardinfo->SD_cid.ProdSN |= tmp; - - /*!< Byte 13 */ - tmp = (uint8_t)((CID_Tab[3] & 0x00FF0000) >> 16); - cardinfo->SD_cid.Reserved1 |= (tmp & 0xF0) >> 4; - cardinfo->SD_cid.ManufactDate = (tmp & 0x0F) << 8; - - /*!< Byte 14 */ - tmp = (uint8_t)((CID_Tab[3] & 0x0000FF00) >> 8); - cardinfo->SD_cid.ManufactDate |= tmp; - - /*!< Byte 15 */ - tmp = (uint8_t)(CID_Tab[3] & 0x000000FF); - cardinfo->SD_cid.CID_CRC = (tmp & 0xFE) >> 1; - cardinfo->SD_cid.Reserved2 = 1; - - return(errorstatus); -} - -/** - * @brief Enables wide bus opeartion for the requeseted card if supported by - * card. - * @param WideMode: Specifies the SD card wide bus mode. - * This parameter can be one of the following values: - * @arg SDIO_BusWide_8b: 8-bit data transfer (Only for MMC) - * @arg SDIO_BusWide_4b: 4-bit data transfer - * @arg SDIO_BusWide_1b: 1-bit data transfer - * @retval SD_Error: SD Card Error code. - */ -SD_Error SD_GetCardStatus(SD_CardStatus *cardstatus) -{ - SD_Error errorstatus = SD_OK; - uint8_t tmp = 0; - - errorstatus = SD_SendSDStatus((uint32_t *)SDSTATUS_Tab); - - if (errorstatus != SD_OK) - { - return(errorstatus); - } - - /*!< Byte 0 */ - tmp = (uint8_t)((SDSTATUS_Tab[0] & 0xC0) >> 6); - cardstatus->DAT_BUS_WIDTH = tmp; - - /*!< Byte 0 */ - tmp = (uint8_t)((SDSTATUS_Tab[0] & 0x20) >> 5); - cardstatus->SECURED_MODE = tmp; - - /*!< Byte 2 */ - tmp = (uint8_t)((SDSTATUS_Tab[2] & 0xFF)); - cardstatus->SD_CARD_TYPE = tmp << 8; - - /*!< Byte 3 */ - tmp = (uint8_t)((SDSTATUS_Tab[3] & 0xFF)); - cardstatus->SD_CARD_TYPE |= tmp; - - /*!< Byte 4 */ - tmp = (uint8_t)(SDSTATUS_Tab[4] & 0xFF); - cardstatus->SIZE_OF_PROTECTED_AREA = tmp << 24; - - /*!< Byte 5 */ - tmp = (uint8_t)(SDSTATUS_Tab[5] & 0xFF); - cardstatus->SIZE_OF_PROTECTED_AREA |= tmp << 16; - - /*!< Byte 6 */ - tmp = (uint8_t)(SDSTATUS_Tab[6] & 0xFF); - cardstatus->SIZE_OF_PROTECTED_AREA |= tmp << 8; - - /*!< Byte 7 */ - tmp = (uint8_t)(SDSTATUS_Tab[7] & 0xFF); - cardstatus->SIZE_OF_PROTECTED_AREA |= tmp; - - /*!< Byte 8 */ - tmp = (uint8_t)((SDSTATUS_Tab[8] & 0xFF)); - cardstatus->SPEED_CLASS = tmp; - - /*!< Byte 9 */ - tmp = (uint8_t)((SDSTATUS_Tab[9] & 0xFF)); - cardstatus->PERFORMANCE_MOVE = tmp; - - /*!< Byte 10 */ - tmp = (uint8_t)((SDSTATUS_Tab[10] & 0xF0) >> 4); - cardstatus->AU_SIZE = tmp; - - /*!< Byte 11 */ - tmp = (uint8_t)(SDSTATUS_Tab[11] & 0xFF); - cardstatus->ERASE_SIZE = tmp << 8; - - /*!< Byte 12 */ - tmp = (uint8_t)(SDSTATUS_Tab[12] & 0xFF); - cardstatus->ERASE_SIZE |= tmp; - - /*!< Byte 13 */ - tmp = (uint8_t)((SDSTATUS_Tab[13] & 0xFC) >> 2); - cardstatus->ERASE_TIMEOUT = tmp; - - /*!< Byte 13 */ - tmp = (uint8_t)((SDSTATUS_Tab[13] & 0x3)); - cardstatus->ERASE_OFFSET = tmp; - - return(errorstatus); -} - -/** - * @brief Enables wide bus opeartion for the requeseted card if supported by - * card. - * @param WideMode: Specifies the SD card wide bus mode. - * This parameter can be one of the following values: - * @arg SDIO_BusWide_8b: 8-bit data transfer (Only for MMC) - * @arg SDIO_BusWide_4b: 4-bit data transfer - * @arg SDIO_BusWide_1b: 1-bit data transfer - * @retval SD_Error: SD Card Error code. - */ -SD_Error SD_EnableWideBusOperation(uint32_t WideMode) -{ - SD_Error errorstatus = SD_OK; - - /*!< MMC Card doesn't support this feature */ - if (SDIO_MULTIMEDIA_CARD == CardType) - { - errorstatus = SD_UNSUPPORTED_FEATURE; - return(errorstatus); - } - else if ((SDIO_STD_CAPACITY_SD_CARD_V1_1 == CardType) || (SDIO_STD_CAPACITY_SD_CARD_V2_0 == CardType) || (SDIO_HIGH_CAPACITY_SD_CARD == CardType)) - { - if (SDIO_BusWide_8b == WideMode) - { - errorstatus = SD_UNSUPPORTED_FEATURE; - return(errorstatus); - } - else if (SDIO_BusWide_4b == WideMode) - { - errorstatus = SDEnWideBus(ENABLE); - - if (SD_OK == errorstatus) - { - /*!< Configure the SDIO peripheral */ - SDIO_InitStructure.SDIO_ClockDiv = SDIO_TRANSFER_CLK_DIV; - SDIO_InitStructure.SDIO_ClockEdge = SDIO_ClockEdge_Rising; - SDIO_InitStructure.SDIO_ClockBypass = SDIO_ClockBypass_Disable; - SDIO_InitStructure.SDIO_ClockPowerSave = SDIO_ClockPowerSave_Disable; - SDIO_InitStructure.SDIO_BusWide = SDIO_BusWide_4b; - SDIO_InitStructure.SDIO_HardwareFlowControl = SDIO_HardwareFlowControl_Disable; - SDIO_Init(&SDIO_InitStructure); - } - } - else - { - errorstatus = SDEnWideBus(DISABLE); - - if (SD_OK == errorstatus) - { - /*!< Configure the SDIO peripheral */ - SDIO_InitStructure.SDIO_ClockDiv = SDIO_TRANSFER_CLK_DIV; - SDIO_InitStructure.SDIO_ClockEdge = SDIO_ClockEdge_Rising; - SDIO_InitStructure.SDIO_ClockBypass = SDIO_ClockBypass_Disable; - SDIO_InitStructure.SDIO_ClockPowerSave = SDIO_ClockPowerSave_Disable; - SDIO_InitStructure.SDIO_BusWide = SDIO_BusWide_1b; - SDIO_InitStructure.SDIO_HardwareFlowControl = SDIO_HardwareFlowControl_Disable; - SDIO_Init(&SDIO_InitStructure); - } - } - } - - return(errorstatus); -} - -/** - * @brief Selects od Deselects the corresponding card. - * @param addr: Address of the Card to be selected. - * @retval SD_Error: SD Card Error code. - */ -SD_Error SD_SelectDeselect(uint64_t addr) -{ - SD_Error errorstatus = SD_OK; - - /*!< Send CMD7 SDIO_SEL_DESEL_CARD */ - SDIO_CmdInitStructure.SDIO_Argument = (uint32_t)addr; - SDIO_CmdInitStructure.SDIO_CmdIndex = SD_CMD_SEL_DESEL_CARD; - SDIO_CmdInitStructure.SDIO_Response = SDIO_Response_Short; - SDIO_CmdInitStructure.SDIO_Wait = SDIO_Wait_No; - SDIO_CmdInitStructure.SDIO_CPSM = SDIO_CPSM_Enable; - SDIO_SendCommand(&SDIO_CmdInitStructure); - - errorstatus = CmdResp1Error(SD_CMD_SEL_DESEL_CARD); - - return(errorstatus); -} - -/** - * @brief Allows to read one block from a specified address in a card. The Data - * transfer can be managed by DMA mode or Polling mode. - * @note This operation should be followed by two functions to check if the - * DMA Controller and SD Card status. - * - SD_ReadWaitOperation(): this function insure that the DMA - * controller has finished all data transfer. - * - SD_GetStatus(): to check that the SD Card has finished the - * data transfer and it is ready for data. - * @param readbuff: pointer to the buffer that will contain the received data - * @param ReadAddr: Address from where data are to be read. - * @param BlockSize: the SD card Data block size. The Block size should be 512. - * @retval SD_Error: SD Card Error code. - */ -SD_Error SD_ReadBlock(uint8_t *readbuff, uint64_t ReadAddr, uint16_t BlockSize) -{ - SD_Error errorstatus = SD_OK; -#if defined (SD_POLLING_MODE) - uint32_t count = 0, *tempbuff = (uint32_t *)readbuff; -#endif - - TransferError = SD_OK; - TransferEnd = 0; - StopCondition = 0; - - SDIO->DCTRL = 0x0; - -#if defined (SD_DMA_MODE) - SDIO_ITConfig(SDIO_IT_DCRCFAIL | SDIO_IT_DTIMEOUT | SDIO_IT_DATAEND | SDIO_IT_RXOVERR | SDIO_IT_STBITERR, ENABLE); - SDIO_DMACmd(ENABLE); - SD_LowLevel_DMA_RxConfig((uint32_t *)readbuff, BlockSize); -#endif - - if (CardType == SDIO_HIGH_CAPACITY_SD_CARD) - { - BlockSize = 512; - ReadAddr /= 512; - } - - /* Set Block Size for Card */ - SDIO_CmdInitStructure.SDIO_Argument = (uint32_t) BlockSize; - SDIO_CmdInitStructure.SDIO_CmdIndex = SD_CMD_SET_BLOCKLEN; - SDIO_CmdInitStructure.SDIO_Response = SDIO_Response_Short; - SDIO_CmdInitStructure.SDIO_Wait = SDIO_Wait_No; - SDIO_CmdInitStructure.SDIO_CPSM = SDIO_CPSM_Enable; - SDIO_SendCommand(&SDIO_CmdInitStructure); - - errorstatus = CmdResp1Error(SD_CMD_SET_BLOCKLEN); - - if (SD_OK != errorstatus) - { - return(errorstatus); - } - - SDIO_DataInitStructure.SDIO_DataTimeOut = SD_DATATIMEOUT; - SDIO_DataInitStructure.SDIO_DataLength = BlockSize; - SDIO_DataInitStructure.SDIO_DataBlockSize = (uint32_t) 9 << 4; - SDIO_DataInitStructure.SDIO_TransferDir = SDIO_TransferDir_ToSDIO; - SDIO_DataInitStructure.SDIO_TransferMode = SDIO_TransferMode_Block; - SDIO_DataInitStructure.SDIO_DPSM = SDIO_DPSM_Enable; - SDIO_DataConfig(&SDIO_DataInitStructure); - - /*!< Send CMD17 READ_SINGLE_BLOCK */ - SDIO_CmdInitStructure.SDIO_Argument = (uint32_t)ReadAddr; - SDIO_CmdInitStructure.SDIO_CmdIndex = SD_CMD_READ_SINGLE_BLOCK; - SDIO_CmdInitStructure.SDIO_Response = SDIO_Response_Short; - SDIO_CmdInitStructure.SDIO_Wait = SDIO_Wait_No; - SDIO_CmdInitStructure.SDIO_CPSM = SDIO_CPSM_Enable; - SDIO_SendCommand(&SDIO_CmdInitStructure); - - errorstatus = CmdResp1Error(SD_CMD_READ_SINGLE_BLOCK); - - if (errorstatus != SD_OK) - { - return(errorstatus); - } - -#if defined (SD_POLLING_MODE) - /*!< In case of single block transfer, no need of stop transfer at all.*/ - /*!< Polling mode */ - while (!(SDIO->STA &(SDIO_FLAG_RXOVERR | SDIO_FLAG_DCRCFAIL | SDIO_FLAG_DTIMEOUT | SDIO_FLAG_DBCKEND | SDIO_FLAG_STBITERR))) - { - if (SDIO_GetFlagStatus(SDIO_FLAG_RXFIFOHF) != RESET) - { - for (count = 0; count < 8; count++) - { - *(tempbuff + count) = SDIO_ReadData(); - } - tempbuff += 8; - } - } - - if (SDIO_GetFlagStatus(SDIO_FLAG_DTIMEOUT) != RESET) - { - SDIO_ClearFlag(SDIO_FLAG_DTIMEOUT); - errorstatus = SD_DATA_TIMEOUT; - return(errorstatus); - } - else if (SDIO_GetFlagStatus(SDIO_FLAG_DCRCFAIL) != RESET) - { - SDIO_ClearFlag(SDIO_FLAG_DCRCFAIL); - errorstatus = SD_DATA_CRC_FAIL; - return(errorstatus); - } - else if (SDIO_GetFlagStatus(SDIO_FLAG_RXOVERR) != RESET) - { - SDIO_ClearFlag(SDIO_FLAG_RXOVERR); - errorstatus = SD_RX_OVERRUN; - return(errorstatus); - } - else if (SDIO_GetFlagStatus(SDIO_FLAG_STBITERR) != RESET) - { - SDIO_ClearFlag(SDIO_FLAG_STBITERR); - errorstatus = SD_START_BIT_ERR; - return(errorstatus); - } - count = SD_DATATIMEOUT; - while ((SDIO_GetFlagStatus(SDIO_FLAG_RXDAVL) != RESET) && (count > 0)) - { - *tempbuff = SDIO_ReadData(); - tempbuff++; - count--; - } - - /*!< Clear all the static flags */ - SDIO_ClearFlag(SDIO_STATIC_FLAGS); - -#endif - - return(errorstatus); -} - -/** - * @brief Allows to read blocks from a specified address in a card. The Data - * transfer can be managed by DMA mode or Polling mode. - * @note This operation should be followed by two functions to check if the - * DMA Controller and SD Card status. - * - SD_ReadWaitOperation(): this function insure that the DMA - * controller has finished all data transfer. - * - SD_GetStatus(): to check that the SD Card has finished the - * data transfer and it is ready for data. - * @param readbuff: pointer to the buffer that will contain the received data. - * @param ReadAddr: Address from where data are to be read. - * @param BlockSize: the SD card Data block size. The Block size should be 512. - * @param NumberOfBlocks: number of blocks to be read. - * @retval SD_Error: SD Card Error code. - */ -SD_Error SD_ReadMultiBlocks(uint8_t *readbuff, uint64_t ReadAddr, uint16_t BlockSize, uint32_t NumberOfBlocks) -{ - SD_Error errorstatus = SD_OK; - TransferError = SD_OK; - TransferEnd = 0; - StopCondition = 1; - - SDIO->DCTRL = 0x0; - - SDIO_ITConfig(SDIO_IT_DCRCFAIL | SDIO_IT_DTIMEOUT | SDIO_IT_DATAEND | SDIO_IT_RXOVERR | SDIO_IT_STBITERR, ENABLE); - SD_LowLevel_DMA_RxConfig((uint32_t *)readbuff, (NumberOfBlocks * BlockSize)); - SDIO_DMACmd(ENABLE); - - if (CardType == SDIO_HIGH_CAPACITY_SD_CARD) - { - BlockSize = 512; - ReadAddr /= 512; - } - - /*!< Set Block Size for Card */ - SDIO_CmdInitStructure.SDIO_Argument = (uint32_t) BlockSize; - SDIO_CmdInitStructure.SDIO_CmdIndex = SD_CMD_SET_BLOCKLEN; - SDIO_CmdInitStructure.SDIO_Response = SDIO_Response_Short; - SDIO_CmdInitStructure.SDIO_Wait = SDIO_Wait_No; - SDIO_CmdInitStructure.SDIO_CPSM = SDIO_CPSM_Enable; - SDIO_SendCommand(&SDIO_CmdInitStructure); - - errorstatus = CmdResp1Error(SD_CMD_SET_BLOCKLEN); - - if (SD_OK != errorstatus) - { - return(errorstatus); - } - - SDIO_DataInitStructure.SDIO_DataTimeOut = SD_DATATIMEOUT; - SDIO_DataInitStructure.SDIO_DataLength = NumberOfBlocks * BlockSize; - SDIO_DataInitStructure.SDIO_DataBlockSize = (uint32_t) 9 << 4; - SDIO_DataInitStructure.SDIO_TransferDir = SDIO_TransferDir_ToSDIO; - SDIO_DataInitStructure.SDIO_TransferMode = SDIO_TransferMode_Block; - SDIO_DataInitStructure.SDIO_DPSM = SDIO_DPSM_Enable; - SDIO_DataConfig(&SDIO_DataInitStructure); - - /*!< Send CMD18 READ_MULT_BLOCK with argument data address */ - SDIO_CmdInitStructure.SDIO_Argument = (uint32_t)ReadAddr; - SDIO_CmdInitStructure.SDIO_CmdIndex = SD_CMD_READ_MULT_BLOCK; - SDIO_CmdInitStructure.SDIO_Response = SDIO_Response_Short; - SDIO_CmdInitStructure.SDIO_Wait = SDIO_Wait_No; - SDIO_CmdInitStructure.SDIO_CPSM = SDIO_CPSM_Enable; - SDIO_SendCommand(&SDIO_CmdInitStructure); - - errorstatus = CmdResp1Error(SD_CMD_READ_MULT_BLOCK); - - if (errorstatus != SD_OK) - { - return(errorstatus); - } - - return(errorstatus); -} - -/** - * @brief This function waits until the SDIO DMA data transfer is finished. - * This function should be called after SDIO_ReadMultiBlocks() function - * to insure that all data sent by the card are already transferred by - * the DMA controller. - * @param None. - * @retval SD_Error: SD Card Error code. - */ -SD_Error SD_WaitReadOperation(void) -{ - SD_Error errorstatus = SD_OK; - uint32_t timeout; - - timeout = SD_DATATIMEOUT; - - while ((DMAEndOfTransfer == 0x00) && (TransferEnd == 0) && (TransferError == SD_OK) && (timeout > 0)) - { - timeout--; - } - - DMAEndOfTransfer = 0x00; - - timeout = SD_DATATIMEOUT; - - while(((SDIO->STA & SDIO_FLAG_RXACT)) && (timeout > 0)) - { - timeout--; - } - - if (StopCondition == 1) - { - errorstatus = SD_StopTransfer(); - StopCondition = 0; - } - - if ((timeout == 0) && (errorstatus == SD_OK)) - { - errorstatus = SD_DATA_TIMEOUT; - } - - /*!< Clear all the static flags */ - SDIO_ClearFlag(SDIO_STATIC_FLAGS); - - if (TransferError != SD_OK) - { - return(TransferError); - } - else - { - return(errorstatus); - } -} - -/** - * @brief Allows to write one block starting from a specified address in a card. - * The Data transfer can be managed by DMA mode or Polling mode. - * @note This operation should be followed by two functions to check if the - * DMA Controller and SD Card status. - * - SD_ReadWaitOperation(): this function insure that the DMA - * controller has finished all data transfer. - * - SD_GetStatus(): to check that the SD Card has finished the - * data transfer and it is ready for data. - * @param writebuff: pointer to the buffer that contain the data to be transferred. - * @param WriteAddr: Address from where data are to be read. - * @param BlockSize: the SD card Data block size. The Block size should be 512. - * @retval SD_Error: SD Card Error code. - */ -SD_Error SD_WriteBlock(uint8_t *writebuff, uint64_t WriteAddr, uint16_t BlockSize) -{ - SD_Error errorstatus = SD_OK; - -#if defined (SD_POLLING_MODE) - uint32_t bytestransferred = 0, count = 0, restwords = 0; - uint32_t *tempbuff = (uint32_t *)writebuff; -#endif - - TransferError = SD_OK; - TransferEnd = 0; - StopCondition = 0; - - SDIO->DCTRL = 0x0; - -#if defined (SD_DMA_MODE) - SDIO_ITConfig(SDIO_IT_DCRCFAIL | SDIO_IT_DTIMEOUT | SDIO_IT_DATAEND | SDIO_IT_RXOVERR | SDIO_IT_STBITERR, ENABLE); - SD_LowLevel_DMA_TxConfig((uint32_t *)writebuff, BlockSize); - SDIO_DMACmd(ENABLE); -#endif - - if (CardType == SDIO_HIGH_CAPACITY_SD_CARD) - { - BlockSize = 512; - WriteAddr /= 512; - } - - /* Set Block Size for Card */ - SDIO_CmdInitStructure.SDIO_Argument = (uint32_t) BlockSize; - SDIO_CmdInitStructure.SDIO_CmdIndex = SD_CMD_SET_BLOCKLEN; - SDIO_CmdInitStructure.SDIO_Response = SDIO_Response_Short; - SDIO_CmdInitStructure.SDIO_Wait = SDIO_Wait_No; - SDIO_CmdInitStructure.SDIO_CPSM = SDIO_CPSM_Enable; - SDIO_SendCommand(&SDIO_CmdInitStructure); - - errorstatus = CmdResp1Error(SD_CMD_SET_BLOCKLEN); - - if (SD_OK != errorstatus) - { - return(errorstatus); - } - - /*!< Send CMD24 WRITE_SINGLE_BLOCK */ - SDIO_CmdInitStructure.SDIO_Argument = (uint32_t)WriteAddr; - SDIO_CmdInitStructure.SDIO_CmdIndex = SD_CMD_WRITE_SINGLE_BLOCK; - SDIO_CmdInitStructure.SDIO_Response = SDIO_Response_Short; - SDIO_CmdInitStructure.SDIO_Wait = SDIO_Wait_No; - SDIO_CmdInitStructure.SDIO_CPSM = SDIO_CPSM_Enable; - SDIO_SendCommand(&SDIO_CmdInitStructure); - - errorstatus = CmdResp1Error(SD_CMD_WRITE_SINGLE_BLOCK); - - if (errorstatus != SD_OK) - { - return(errorstatus); - } - - SDIO_DataInitStructure.SDIO_DataTimeOut = SD_DATATIMEOUT; - SDIO_DataInitStructure.SDIO_DataLength = BlockSize; - SDIO_DataInitStructure.SDIO_DataBlockSize = (uint32_t) 9 << 4; - SDIO_DataInitStructure.SDIO_TransferDir = SDIO_TransferDir_ToCard; - SDIO_DataInitStructure.SDIO_TransferMode = SDIO_TransferMode_Block; - SDIO_DataInitStructure.SDIO_DPSM = SDIO_DPSM_Enable; - SDIO_DataConfig(&SDIO_DataInitStructure); - - /*!< In case of single data block transfer no need of stop command at all */ -#if defined (SD_POLLING_MODE) - while (!(SDIO->STA & (SDIO_FLAG_DBCKEND | SDIO_FLAG_TXUNDERR | SDIO_FLAG_DCRCFAIL | SDIO_FLAG_DTIMEOUT | SDIO_FLAG_STBITERR))) - { - if (SDIO_GetFlagStatus(SDIO_FLAG_TXFIFOHE) != RESET) - { - if ((512 - bytestransferred) < 32) - { - restwords = ((512 - bytestransferred) % 4 == 0) ? ((512 - bytestransferred) / 4) : (( 512 - bytestransferred) / 4 + 1); - for (count = 0; count < restwords; count++, tempbuff++, bytestransferred += 4) - { - SDIO_WriteData(*tempbuff); - } - } - else - { - for (count = 0; count < 8; count++) - { - SDIO_WriteData(*(tempbuff + count)); - } - tempbuff += 8; - bytestransferred += 32; - } - } - } - if (SDIO_GetFlagStatus(SDIO_FLAG_DTIMEOUT) != RESET) - { - SDIO_ClearFlag(SDIO_FLAG_DTIMEOUT); - errorstatus = SD_DATA_TIMEOUT; - return(errorstatus); - } - else if (SDIO_GetFlagStatus(SDIO_FLAG_DCRCFAIL) != RESET) - { - SDIO_ClearFlag(SDIO_FLAG_DCRCFAIL); - errorstatus = SD_DATA_CRC_FAIL; - return(errorstatus); - } - else if (SDIO_GetFlagStatus(SDIO_FLAG_TXUNDERR) != RESET) - { - SDIO_ClearFlag(SDIO_FLAG_TXUNDERR); - errorstatus = SD_TX_UNDERRUN; - return(errorstatus); - } - else if (SDIO_GetFlagStatus(SDIO_FLAG_STBITERR) != RESET) - { - SDIO_ClearFlag(SDIO_FLAG_STBITERR); - errorstatus = SD_START_BIT_ERR; - return(errorstatus); - } - -#endif - - return(errorstatus); -} - -/** - * @brief Allows to write blocks starting from a specified address in a card. - * The Data transfer can be managed by DMA mode only. - * @note This operation should be followed by two functions to check if the - * DMA Controller and SD Card status. - * - SD_ReadWaitOperation(): this function insure that the DMA - * controller has finished all data transfer. - * - SD_GetStatus(): to check that the SD Card has finished the - * data transfer and it is ready for data. - * @param WriteAddr: Address from where data are to be read. - * @param writebuff: pointer to the buffer that contain the data to be transferred. - * @param BlockSize: the SD card Data block size. The Block size should be 512. - * @param NumberOfBlocks: number of blocks to be written. - * @retval SD_Error: SD Card Error code. - */ -SD_Error SD_WriteMultiBlocks(uint8_t *writebuff, uint64_t WriteAddr, uint16_t BlockSize, uint32_t NumberOfBlocks) -{ - SD_Error errorstatus = SD_OK; - - TransferError = SD_OK; - TransferEnd = 0; - StopCondition = 1; - SDIO->DCTRL = 0x0; - - SDIO_ITConfig(SDIO_IT_DCRCFAIL | SDIO_IT_DTIMEOUT | SDIO_IT_DATAEND | SDIO_IT_RXOVERR | SDIO_IT_STBITERR, ENABLE); - SD_LowLevel_DMA_TxConfig((uint32_t *)writebuff, (NumberOfBlocks * BlockSize)); - SDIO_DMACmd(ENABLE); - - if (CardType == SDIO_HIGH_CAPACITY_SD_CARD) - { - BlockSize = 512; - WriteAddr /= 512; - } - - /* Set Block Size for Card */ - SDIO_CmdInitStructure.SDIO_Argument = (uint32_t) BlockSize; - SDIO_CmdInitStructure.SDIO_CmdIndex = SD_CMD_SET_BLOCKLEN; - SDIO_CmdInitStructure.SDIO_Response = SDIO_Response_Short; - SDIO_CmdInitStructure.SDIO_Wait = SDIO_Wait_No; - SDIO_CmdInitStructure.SDIO_CPSM = SDIO_CPSM_Enable; - SDIO_SendCommand(&SDIO_CmdInitStructure); - - errorstatus = CmdResp1Error(SD_CMD_SET_BLOCKLEN); - - if (SD_OK != errorstatus) - { - return(errorstatus); - } - - /*!< To improve performance */ - SDIO_CmdInitStructure.SDIO_Argument = (uint32_t) (RCA << 16); - SDIO_CmdInitStructure.SDIO_CmdIndex = SD_CMD_APP_CMD; - SDIO_CmdInitStructure.SDIO_Response = SDIO_Response_Short; - SDIO_CmdInitStructure.SDIO_Wait = SDIO_Wait_No; - SDIO_CmdInitStructure.SDIO_CPSM = SDIO_CPSM_Enable; - SDIO_SendCommand(&SDIO_CmdInitStructure); - - - errorstatus = CmdResp1Error(SD_CMD_APP_CMD); - - if (errorstatus != SD_OK) - { - return(errorstatus); - } - /*!< To improve performance */ - SDIO_CmdInitStructure.SDIO_Argument = (uint32_t)NumberOfBlocks; - SDIO_CmdInitStructure.SDIO_CmdIndex = SD_CMD_SET_BLOCK_COUNT; - SDIO_CmdInitStructure.SDIO_Response = SDIO_Response_Short; - SDIO_CmdInitStructure.SDIO_Wait = SDIO_Wait_No; - SDIO_CmdInitStructure.SDIO_CPSM = SDIO_CPSM_Enable; - SDIO_SendCommand(&SDIO_CmdInitStructure); - - errorstatus = CmdResp1Error(SD_CMD_SET_BLOCK_COUNT); - - if (errorstatus != SD_OK) - { - return(errorstatus); - } - - - /*!< Send CMD25 WRITE_MULT_BLOCK with argument data address */ - SDIO_CmdInitStructure.SDIO_Argument = (uint32_t)WriteAddr; - SDIO_CmdInitStructure.SDIO_CmdIndex = SD_CMD_WRITE_MULT_BLOCK; - SDIO_CmdInitStructure.SDIO_Response = SDIO_Response_Short; - SDIO_CmdInitStructure.SDIO_Wait = SDIO_Wait_No; - SDIO_CmdInitStructure.SDIO_CPSM = SDIO_CPSM_Enable; - SDIO_SendCommand(&SDIO_CmdInitStructure); - - errorstatus = CmdResp1Error(SD_CMD_WRITE_MULT_BLOCK); - - if (SD_OK != errorstatus) - { - return(errorstatus); - } - - SDIO_DataInitStructure.SDIO_DataTimeOut = SD_DATATIMEOUT; - SDIO_DataInitStructure.SDIO_DataLength = NumberOfBlocks * BlockSize; - SDIO_DataInitStructure.SDIO_DataBlockSize = (uint32_t) 9 << 4; - SDIO_DataInitStructure.SDIO_TransferDir = SDIO_TransferDir_ToCard; - SDIO_DataInitStructure.SDIO_TransferMode = SDIO_TransferMode_Block; - SDIO_DataInitStructure.SDIO_DPSM = SDIO_DPSM_Enable; - SDIO_DataConfig(&SDIO_DataInitStructure); - - return(errorstatus); -} - -/** - * @brief This function waits until the SDIO DMA data transfer is finished. - * This function should be called after SDIO_WriteBlock() and - * SDIO_WriteMultiBlocks() function to insure that all data sent by the - * card are already transferred by the DMA controller. - * @param None. - * @retval SD_Error: SD Card Error code. - */ -SD_Error SD_WaitWriteOperation(void) -{ - SD_Error errorstatus = SD_OK; - uint32_t timeout; - - timeout = SD_DATATIMEOUT; - - while ((DMAEndOfTransfer == 0x00) && (TransferEnd == 0) && (TransferError == SD_OK) && (timeout > 0)) - { - timeout--; - } - - DMAEndOfTransfer = 0x00; - - timeout = SD_DATATIMEOUT; - - while(((SDIO->STA & SDIO_FLAG_TXACT)) && (timeout > 0)) - { - timeout--; - } - - if (StopCondition == 1) - { - errorstatus = SD_StopTransfer(); - StopCondition = 0; - } - - if ((timeout == 0) && (errorstatus == SD_OK)) - { - errorstatus = SD_DATA_TIMEOUT; - } - - /*!< Clear all the static flags */ - SDIO_ClearFlag(SDIO_STATIC_FLAGS); - - if (TransferError != SD_OK) - { - return(TransferError); - } - else - { - return(errorstatus); - } -} - -/** - * @brief Gets the cuurent data transfer state. - * @param None - * @retval SDTransferState: Data Transfer state. - * This value can be: - * - SD_TRANSFER_OK: No data transfer is acting - * - SD_TRANSFER_BUSY: Data transfer is acting - */ -SDTransferState SD_GetTransferState(void) -{ - if (SDIO->STA & (SDIO_FLAG_TXACT | SDIO_FLAG_RXACT)) - { - return(SD_TRANSFER_BUSY); - } - else - { - return(SD_TRANSFER_OK); - } -} - -/** - * @brief Aborts an ongoing data transfer. - * @param None - * @retval SD_Error: SD Card Error code. - */ -SD_Error SD_StopTransfer(void) -{ - SD_Error errorstatus = SD_OK; - - /*!< Send CMD12 STOP_TRANSMISSION */ - SDIO_CmdInitStructure.SDIO_Argument = 0x0; - SDIO_CmdInitStructure.SDIO_CmdIndex = SD_CMD_STOP_TRANSMISSION; - SDIO_CmdInitStructure.SDIO_Response = SDIO_Response_Short; - SDIO_CmdInitStructure.SDIO_Wait = SDIO_Wait_No; - SDIO_CmdInitStructure.SDIO_CPSM = SDIO_CPSM_Enable; - SDIO_SendCommand(&SDIO_CmdInitStructure); - - errorstatus = CmdResp1Error(SD_CMD_STOP_TRANSMISSION); - - return(errorstatus); -} - -/** - * @brief Allows to erase memory area specified for the given card. - * @param startaddr: the start address. - * @param endaddr: the end address. - * @retval SD_Error: SD Card Error code. - */ -SD_Error SD_Erase(uint64_t startaddr, uint64_t endaddr) -{ - SD_Error errorstatus = SD_OK; - uint32_t delay = 0; - __IO uint32_t maxdelay = 0; - uint8_t cardstate = 0; - - /*!< Check if the card coomnd class supports erase command */ - if (((CSD_Tab[1] >> 20) & SD_CCCC_ERASE) == 0) - { - errorstatus = SD_REQUEST_NOT_APPLICABLE; - return(errorstatus); - } - - maxdelay = 120000 / ((SDIO->CLKCR & 0xFF) + 2); - - if (SDIO_GetResponse(SDIO_RESP1) & SD_CARD_LOCKED) - { - errorstatus = SD_LOCK_UNLOCK_FAILED; - return(errorstatus); - } - - if (CardType == SDIO_HIGH_CAPACITY_SD_CARD) - { - startaddr /= 512; - endaddr /= 512; - } - - /*!< According to sd-card spec 1.0 ERASE_GROUP_START (CMD32) and erase_group_end(CMD33) */ - if ((SDIO_STD_CAPACITY_SD_CARD_V1_1 == CardType) || (SDIO_STD_CAPACITY_SD_CARD_V2_0 == CardType) || (SDIO_HIGH_CAPACITY_SD_CARD == CardType)) - { - /*!< Send CMD32 SD_ERASE_GRP_START with argument as addr */ - SDIO_CmdInitStructure.SDIO_Argument =(uint32_t)startaddr; - SDIO_CmdInitStructure.SDIO_CmdIndex = SD_CMD_SD_ERASE_GRP_START; - SDIO_CmdInitStructure.SDIO_Response = SDIO_Response_Short; - SDIO_CmdInitStructure.SDIO_Wait = SDIO_Wait_No; - SDIO_CmdInitStructure.SDIO_CPSM = SDIO_CPSM_Enable; - SDIO_SendCommand(&SDIO_CmdInitStructure); - - errorstatus = CmdResp1Error(SD_CMD_SD_ERASE_GRP_START); - if (errorstatus != SD_OK) - { - return(errorstatus); - } - - /*!< Send CMD33 SD_ERASE_GRP_END with argument as addr */ - SDIO_CmdInitStructure.SDIO_Argument = (uint32_t)endaddr; - SDIO_CmdInitStructure.SDIO_CmdIndex = SD_CMD_SD_ERASE_GRP_END; - SDIO_CmdInitStructure.SDIO_Response = SDIO_Response_Short; - SDIO_CmdInitStructure.SDIO_Wait = SDIO_Wait_No; - SDIO_CmdInitStructure.SDIO_CPSM = SDIO_CPSM_Enable; - SDIO_SendCommand(&SDIO_CmdInitStructure); - - errorstatus = CmdResp1Error(SD_CMD_SD_ERASE_GRP_END); - if (errorstatus != SD_OK) - { - return(errorstatus); - } - } - - /*!< Send CMD38 ERASE */ - SDIO_CmdInitStructure.SDIO_Argument = 0; - SDIO_CmdInitStructure.SDIO_CmdIndex = SD_CMD_ERASE; - SDIO_CmdInitStructure.SDIO_Response = SDIO_Response_Short; - SDIO_CmdInitStructure.SDIO_Wait = SDIO_Wait_No; - SDIO_CmdInitStructure.SDIO_CPSM = SDIO_CPSM_Enable; - SDIO_SendCommand(&SDIO_CmdInitStructure); - - errorstatus = CmdResp1Error(SD_CMD_ERASE); - - if (errorstatus != SD_OK) - { - return(errorstatus); - } - - for (delay = 0; delay < maxdelay; delay++) - {} - - /*!< Wait till the card is in programming state */ - errorstatus = IsCardProgramming(&cardstate); - delay = SD_DATATIMEOUT; - while ((delay > 0) && (errorstatus == SD_OK) && ((SD_CARD_PROGRAMMING == cardstate) || (SD_CARD_RECEIVING == cardstate))) - { - errorstatus = IsCardProgramming(&cardstate); - delay--; - } - - return(errorstatus); -} - -/** - * @brief Returns the current card's status. - * @param pcardstatus: pointer to the buffer that will contain the SD card - * status (Card Status register). - * @retval SD_Error: SD Card Error code. - */ -SD_Error SD_SendStatus(uint32_t *pcardstatus) -{ - SD_Error errorstatus = SD_OK; - - if (pcardstatus == NULL) - { - errorstatus = SD_INVALID_PARAMETER; - return(errorstatus); - } - - SDIO_CmdInitStructure.SDIO_Argument = (uint32_t) RCA << 16; - SDIO_CmdInitStructure.SDIO_CmdIndex = SD_CMD_SEND_STATUS; - SDIO_CmdInitStructure.SDIO_Response = SDIO_Response_Short; - SDIO_CmdInitStructure.SDIO_Wait = SDIO_Wait_No; - SDIO_CmdInitStructure.SDIO_CPSM = SDIO_CPSM_Enable; - SDIO_SendCommand(&SDIO_CmdInitStructure); - - errorstatus = CmdResp1Error(SD_CMD_SEND_STATUS); - - if (errorstatus != SD_OK) - { - return(errorstatus); - } - - *pcardstatus = SDIO_GetResponse(SDIO_RESP1); - - return(errorstatus); -} - -/** - * @brief Returns the current SD card's status. - * @param psdstatus: pointer to the buffer that will contain the SD card status - * (SD Status register). - * @retval SD_Error: SD Card Error code. - */ -SD_Error SD_SendSDStatus(uint32_t *psdstatus) -{ - SD_Error errorstatus = SD_OK; - uint32_t count = 0; - - if (SDIO_GetResponse(SDIO_RESP1) & SD_CARD_LOCKED) - { - errorstatus = SD_LOCK_UNLOCK_FAILED; - return(errorstatus); - } - - /*!< Set block size for card if it is not equal to current block size for card. */ - SDIO_CmdInitStructure.SDIO_Argument = 64; - SDIO_CmdInitStructure.SDIO_CmdIndex = SD_CMD_SET_BLOCKLEN; - SDIO_CmdInitStructure.SDIO_Response = SDIO_Response_Short; - SDIO_CmdInitStructure.SDIO_Wait = SDIO_Wait_No; - SDIO_CmdInitStructure.SDIO_CPSM = SDIO_CPSM_Enable; - SDIO_SendCommand(&SDIO_CmdInitStructure); - - errorstatus = CmdResp1Error(SD_CMD_SET_BLOCKLEN); - - if (errorstatus != SD_OK) - { - return(errorstatus); - } - - /*!< CMD55 */ - SDIO_CmdInitStructure.SDIO_Argument = (uint32_t) RCA << 16; - SDIO_CmdInitStructure.SDIO_CmdIndex = SD_CMD_APP_CMD; - SDIO_CmdInitStructure.SDIO_Response = SDIO_Response_Short; - SDIO_CmdInitStructure.SDIO_Wait = SDIO_Wait_No; - SDIO_CmdInitStructure.SDIO_CPSM = SDIO_CPSM_Enable; - SDIO_SendCommand(&SDIO_CmdInitStructure); - errorstatus = CmdResp1Error(SD_CMD_APP_CMD); - - if (errorstatus != SD_OK) - { - return(errorstatus); - } - - SDIO_DataInitStructure.SDIO_DataTimeOut = SD_DATATIMEOUT; - SDIO_DataInitStructure.SDIO_DataLength = 64; - SDIO_DataInitStructure.SDIO_DataBlockSize = SDIO_DataBlockSize_64b; - SDIO_DataInitStructure.SDIO_TransferDir = SDIO_TransferDir_ToSDIO; - SDIO_DataInitStructure.SDIO_TransferMode = SDIO_TransferMode_Block; - SDIO_DataInitStructure.SDIO_DPSM = SDIO_DPSM_Enable; - SDIO_DataConfig(&SDIO_DataInitStructure); - - /*!< Send ACMD13 SD_APP_STAUS with argument as card's RCA.*/ - SDIO_CmdInitStructure.SDIO_Argument = 0; - SDIO_CmdInitStructure.SDIO_CmdIndex = SD_CMD_SD_APP_STAUS; - SDIO_CmdInitStructure.SDIO_Response = SDIO_Response_Short; - SDIO_CmdInitStructure.SDIO_Wait = SDIO_Wait_No; - SDIO_CmdInitStructure.SDIO_CPSM = SDIO_CPSM_Enable; - SDIO_SendCommand(&SDIO_CmdInitStructure); - errorstatus = CmdResp1Error(SD_CMD_SD_APP_STAUS); - - if (errorstatus != SD_OK) - { - return(errorstatus); - } - - while (!(SDIO->STA &(SDIO_FLAG_RXOVERR | SDIO_FLAG_DCRCFAIL | SDIO_FLAG_DTIMEOUT | SDIO_FLAG_DBCKEND | SDIO_FLAG_STBITERR))) - { - if (SDIO_GetFlagStatus(SDIO_FLAG_RXFIFOHF) != RESET) - { - for (count = 0; count < 8; count++) - { - *(psdstatus + count) = SDIO_ReadData(); - } - psdstatus += 8; - } - } - - if (SDIO_GetFlagStatus(SDIO_FLAG_DTIMEOUT) != RESET) - { - SDIO_ClearFlag(SDIO_FLAG_DTIMEOUT); - errorstatus = SD_DATA_TIMEOUT; - return(errorstatus); - } - else if (SDIO_GetFlagStatus(SDIO_FLAG_DCRCFAIL) != RESET) - { - SDIO_ClearFlag(SDIO_FLAG_DCRCFAIL); - errorstatus = SD_DATA_CRC_FAIL; - return(errorstatus); - } - else if (SDIO_GetFlagStatus(SDIO_FLAG_RXOVERR) != RESET) - { - SDIO_ClearFlag(SDIO_FLAG_RXOVERR); - errorstatus = SD_RX_OVERRUN; - return(errorstatus); - } - else if (SDIO_GetFlagStatus(SDIO_FLAG_STBITERR) != RESET) - { - SDIO_ClearFlag(SDIO_FLAG_STBITERR); - errorstatus = SD_START_BIT_ERR; - return(errorstatus); - } - - count = SD_DATATIMEOUT; - while ((SDIO_GetFlagStatus(SDIO_FLAG_RXDAVL) != RESET) && (count > 0)) - { - *psdstatus = SDIO_ReadData(); - psdstatus++; - count--; - } - /*!< Clear all the static status flags*/ - SDIO_ClearFlag(SDIO_STATIC_FLAGS); - - return(errorstatus); -} - -/** - * @brief Allows to process all the interrupts that are high. - * @param None - * @retval SD_Error: SD Card Error code. - */ -SD_Error SD_ProcessIRQSrc(void) -{ - if (SDIO_GetITStatus(SDIO_IT_DATAEND) != RESET) - { - TransferError = SD_OK; - SDIO_ClearITPendingBit(SDIO_IT_DATAEND); - TransferEnd = 1; - } - else if (SDIO_GetITStatus(SDIO_IT_DCRCFAIL) != RESET) - { - SDIO_ClearITPendingBit(SDIO_IT_DCRCFAIL); - TransferError = SD_DATA_CRC_FAIL; - } - else if (SDIO_GetITStatus(SDIO_IT_DTIMEOUT) != RESET) - { - SDIO_ClearITPendingBit(SDIO_IT_DTIMEOUT); - TransferError = SD_DATA_TIMEOUT; - } - else if (SDIO_GetITStatus(SDIO_IT_RXOVERR) != RESET) - { - SDIO_ClearITPendingBit(SDIO_IT_RXOVERR); - TransferError = SD_RX_OVERRUN; - } - else if (SDIO_GetITStatus(SDIO_IT_TXUNDERR) != RESET) - { - SDIO_ClearITPendingBit(SDIO_IT_TXUNDERR); - TransferError = SD_TX_UNDERRUN; - } - else if (SDIO_GetITStatus(SDIO_IT_STBITERR) != RESET) - { - SDIO_ClearITPendingBit(SDIO_IT_STBITERR); - TransferError = SD_START_BIT_ERR; - } - - SDIO_ITConfig(SDIO_IT_DCRCFAIL | SDIO_IT_DTIMEOUT | SDIO_IT_DATAEND | - SDIO_IT_TXFIFOHE | SDIO_IT_RXFIFOHF | SDIO_IT_TXUNDERR | - SDIO_IT_RXOVERR | SDIO_IT_STBITERR, DISABLE); - return(TransferError); -} - -/** - * @brief This function waits until the SDIO DMA data transfer is finished. - * @param None. - * @retval None. - */ -void SD_ProcessDMAIRQ(void) -{ - if(DMA2->LISR & SD_SDIO_DMA_FLAG_TCIF) - { - DMAEndOfTransfer = 0x01; - DMA_ClearFlag(SD_SDIO_DMA_STREAM, SD_SDIO_DMA_FLAG_TCIF|SD_SDIO_DMA_FLAG_FEIF); - } -} - -/** - * @brief Checks for error conditions for CMD0. - * @param None - * @retval SD_Error: SD Card Error code. - */ -static SD_Error CmdError(void) -{ - SD_Error errorstatus = SD_OK; - uint32_t timeout; - - timeout = SDIO_CMD0TIMEOUT; /*!< 10000 */ - - while ((timeout > 0) && (SDIO_GetFlagStatus(SDIO_FLAG_CMDSENT) == RESET)) - { - timeout--; - } - - if (timeout == 0) - { - errorstatus = SD_CMD_RSP_TIMEOUT; - return(errorstatus); - } - - /*!< Clear all the static flags */ - SDIO_ClearFlag(SDIO_STATIC_FLAGS); - - return(errorstatus); -} - -/** - * @brief Checks for error conditions for R7 response. - * @param None - * @retval SD_Error: SD Card Error code. - */ -static SD_Error CmdResp7Error(void) -{ - SD_Error errorstatus = SD_OK; - uint32_t status; - uint32_t timeout = SDIO_CMD0TIMEOUT; - - status = SDIO->STA; - - while (!(status & (SDIO_FLAG_CCRCFAIL | SDIO_FLAG_CMDREND | SDIO_FLAG_CTIMEOUT)) && (timeout > 0)) - { - timeout--; - status = SDIO->STA; - } - - if ((timeout == 0) || (status & SDIO_FLAG_CTIMEOUT)) - { - /*!< Card is not V2.0 complient or card does not support the set voltage range */ - errorstatus = SD_CMD_RSP_TIMEOUT; - SDIO_ClearFlag(SDIO_FLAG_CTIMEOUT); - return(errorstatus); - } - - if (status & SDIO_FLAG_CMDREND) - { - /*!< Card is SD V2.0 compliant */ - errorstatus = SD_OK; - SDIO_ClearFlag(SDIO_FLAG_CMDREND); - return(errorstatus); - } - return(errorstatus); -} - -/** - * @brief Checks for error conditions for R1 response. - * @param cmd: The sent command index. - * @retval SD_Error: SD Card Error code. - */ -static SD_Error CmdResp1Error(uint8_t cmd) -{ - SD_Error errorstatus = SD_OK; - uint32_t status; - uint32_t response_r1; - - status = SDIO->STA; - - while (!(status & (SDIO_FLAG_CCRCFAIL | SDIO_FLAG_CMDREND | SDIO_FLAG_CTIMEOUT))) - { - status = SDIO->STA; - } - - if (status & SDIO_FLAG_CTIMEOUT) - { - errorstatus = SD_CMD_RSP_TIMEOUT; - SDIO_ClearFlag(SDIO_FLAG_CTIMEOUT); - return(errorstatus); - } - else if (status & SDIO_FLAG_CCRCFAIL) - { - errorstatus = SD_CMD_CRC_FAIL; - SDIO_ClearFlag(SDIO_FLAG_CCRCFAIL); - return(errorstatus); - } - - /*!< Check response received is of desired command */ - if (SDIO_GetCommandResponse() != cmd) - { - errorstatus = SD_ILLEGAL_CMD; - return(errorstatus); - } - - /*!< Clear all the static flags */ - SDIO_ClearFlag(SDIO_STATIC_FLAGS); - - /*!< We have received response, retrieve it for analysis */ - response_r1 = SDIO_GetResponse(SDIO_RESP1); - - if ((response_r1 & SD_OCR_ERRORBITS) == SD_ALLZERO) - { - return(errorstatus); - } - - if (response_r1 & SD_OCR_ADDR_OUT_OF_RANGE) - { - return(SD_ADDR_OUT_OF_RANGE); - } - - if (response_r1 & SD_OCR_ADDR_MISALIGNED) - { - return(SD_ADDR_MISALIGNED); - } - - if (response_r1 & SD_OCR_BLOCK_LEN_ERR) - { - return(SD_BLOCK_LEN_ERR); - } - - if (response_r1 & SD_OCR_ERASE_SEQ_ERR) - { - return(SD_ERASE_SEQ_ERR); - } - - if (response_r1 & SD_OCR_BAD_ERASE_PARAM) - { - return(SD_BAD_ERASE_PARAM); - } - - if (response_r1 & SD_OCR_WRITE_PROT_VIOLATION) - { - return(SD_WRITE_PROT_VIOLATION); - } - - if (response_r1 & SD_OCR_LOCK_UNLOCK_FAILED) - { - return(SD_LOCK_UNLOCK_FAILED); - } - - if (response_r1 & SD_OCR_COM_CRC_FAILED) - { - return(SD_COM_CRC_FAILED); - } - - if (response_r1 & SD_OCR_ILLEGAL_CMD) - { - return(SD_ILLEGAL_CMD); - } - - if (response_r1 & SD_OCR_CARD_ECC_FAILED) - { - return(SD_CARD_ECC_FAILED); - } - - if (response_r1 & SD_OCR_CC_ERROR) - { - return(SD_CC_ERROR); - } - - if (response_r1 & SD_OCR_GENERAL_UNKNOWN_ERROR) - { - return(SD_GENERAL_UNKNOWN_ERROR); - } - - if (response_r1 & SD_OCR_STREAM_READ_UNDERRUN) - { - return(SD_STREAM_READ_UNDERRUN); - } - - if (response_r1 & SD_OCR_STREAM_WRITE_OVERRUN) - { - return(SD_STREAM_WRITE_OVERRUN); - } - - if (response_r1 & SD_OCR_CID_CSD_OVERWRIETE) - { - return(SD_CID_CSD_OVERWRITE); - } - - if (response_r1 & SD_OCR_WP_ERASE_SKIP) - { - return(SD_WP_ERASE_SKIP); - } - - if (response_r1 & SD_OCR_CARD_ECC_DISABLED) - { - return(SD_CARD_ECC_DISABLED); - } - - if (response_r1 & SD_OCR_ERASE_RESET) - { - return(SD_ERASE_RESET); - } - - if (response_r1 & SD_OCR_AKE_SEQ_ERROR) - { - return(SD_AKE_SEQ_ERROR); - } - return(errorstatus); -} - -/** - * @brief Checks for error conditions for R3 (OCR) response. - * @param None - * @retval SD_Error: SD Card Error code. - */ -static SD_Error CmdResp3Error(void) -{ - SD_Error errorstatus = SD_OK; - uint32_t status; - - status = SDIO->STA; - - while (!(status & (SDIO_FLAG_CCRCFAIL | SDIO_FLAG_CMDREND | SDIO_FLAG_CTIMEOUT))) - { - status = SDIO->STA; - } - - if (status & SDIO_FLAG_CTIMEOUT) - { - errorstatus = SD_CMD_RSP_TIMEOUT; - SDIO_ClearFlag(SDIO_FLAG_CTIMEOUT); - return(errorstatus); - } - /*!< Clear all the static flags */ - SDIO_ClearFlag(SDIO_STATIC_FLAGS); - return(errorstatus); -} - -/** - * @brief Checks for error conditions for R2 (CID or CSD) response. - * @param None - * @retval SD_Error: SD Card Error code. - */ -static SD_Error CmdResp2Error(void) -{ - SD_Error errorstatus = SD_OK; - uint32_t status; - - status = SDIO->STA; - - while (!(status & (SDIO_FLAG_CCRCFAIL | SDIO_FLAG_CTIMEOUT | SDIO_FLAG_CMDREND))) - { - status = SDIO->STA; - } - - if (status & SDIO_FLAG_CTIMEOUT) - { - errorstatus = SD_CMD_RSP_TIMEOUT; - SDIO_ClearFlag(SDIO_FLAG_CTIMEOUT); - return(errorstatus); - } - else if (status & SDIO_FLAG_CCRCFAIL) - { - errorstatus = SD_CMD_CRC_FAIL; - SDIO_ClearFlag(SDIO_FLAG_CCRCFAIL); - return(errorstatus); - } - - /*!< Clear all the static flags */ - SDIO_ClearFlag(SDIO_STATIC_FLAGS); - - return(errorstatus); -} - -/** - * @brief Checks for error conditions for R6 (RCA) response. - * @param cmd: The sent command index. - * @param prca: pointer to the variable that will contain the SD card relative - * address RCA. - * @retval SD_Error: SD Card Error code. - */ -static SD_Error CmdResp6Error(uint8_t cmd, uint16_t *prca) -{ - SD_Error errorstatus = SD_OK; - uint32_t status; - uint32_t response_r1; - - status = SDIO->STA; - - while (!(status & (SDIO_FLAG_CCRCFAIL | SDIO_FLAG_CTIMEOUT | SDIO_FLAG_CMDREND))) - { - status = SDIO->STA; - } - - if (status & SDIO_FLAG_CTIMEOUT) - { - errorstatus = SD_CMD_RSP_TIMEOUT; - SDIO_ClearFlag(SDIO_FLAG_CTIMEOUT); - return(errorstatus); - } - else if (status & SDIO_FLAG_CCRCFAIL) - { - errorstatus = SD_CMD_CRC_FAIL; - SDIO_ClearFlag(SDIO_FLAG_CCRCFAIL); - return(errorstatus); - } - - /*!< Check response received is of desired command */ - if (SDIO_GetCommandResponse() != cmd) - { - errorstatus = SD_ILLEGAL_CMD; - return(errorstatus); - } - - /*!< Clear all the static flags */ - SDIO_ClearFlag(SDIO_STATIC_FLAGS); - - /*!< We have received response, retrieve it. */ - response_r1 = SDIO_GetResponse(SDIO_RESP1); - - if (SD_ALLZERO == (response_r1 & (SD_R6_GENERAL_UNKNOWN_ERROR | SD_R6_ILLEGAL_CMD | SD_R6_COM_CRC_FAILED))) - { - *prca = (uint16_t) (response_r1 >> 16); - return(errorstatus); - } - - if (response_r1 & SD_R6_GENERAL_UNKNOWN_ERROR) - { - return(SD_GENERAL_UNKNOWN_ERROR); - } - - if (response_r1 & SD_R6_ILLEGAL_CMD) - { - return(SD_ILLEGAL_CMD); - } - - if (response_r1 & SD_R6_COM_CRC_FAILED) - { - return(SD_COM_CRC_FAILED); - } - - return(errorstatus); -} - -/** - * @brief Enables or disables the SDIO wide bus mode. - * @param NewState: new state of the SDIO wide bus mode. - * This parameter can be: ENABLE or DISABLE. - * @retval SD_Error: SD Card Error code. - */ -static SD_Error SDEnWideBus(FunctionalState NewState) -{ - SD_Error errorstatus = SD_OK; - - uint32_t scr[2] = {0, 0}; - - if (SDIO_GetResponse(SDIO_RESP1) & SD_CARD_LOCKED) - { - errorstatus = SD_LOCK_UNLOCK_FAILED; - return(errorstatus); - } - - /*!< Get SCR Register */ - errorstatus = FindSCR(RCA, scr); - - if (errorstatus != SD_OK) - { - return(errorstatus); - } - - /*!< If wide bus operation to be enabled */ - if (NewState == ENABLE) - { - /*!< If requested card supports wide bus operation */ - if ((scr[1] & SD_WIDE_BUS_SUPPORT) != SD_ALLZERO) - { - /*!< Send CMD55 APP_CMD with argument as card's RCA.*/ - SDIO_CmdInitStructure.SDIO_Argument = (uint32_t) RCA << 16; - SDIO_CmdInitStructure.SDIO_CmdIndex = SD_CMD_APP_CMD; - SDIO_CmdInitStructure.SDIO_Response = SDIO_Response_Short; - SDIO_CmdInitStructure.SDIO_Wait = SDIO_Wait_No; - SDIO_CmdInitStructure.SDIO_CPSM = SDIO_CPSM_Enable; - SDIO_SendCommand(&SDIO_CmdInitStructure); - - errorstatus = CmdResp1Error(SD_CMD_APP_CMD); - - if (errorstatus != SD_OK) - { - return(errorstatus); - } - - /*!< Send ACMD6 APP_CMD with argument as 2 for wide bus mode */ - SDIO_CmdInitStructure.SDIO_Argument = 0x2; - SDIO_CmdInitStructure.SDIO_CmdIndex = SD_CMD_APP_SD_SET_BUSWIDTH; - SDIO_CmdInitStructure.SDIO_Response = SDIO_Response_Short; - SDIO_CmdInitStructure.SDIO_Wait = SDIO_Wait_No; - SDIO_CmdInitStructure.SDIO_CPSM = SDIO_CPSM_Enable; - SDIO_SendCommand(&SDIO_CmdInitStructure); - - errorstatus = CmdResp1Error(SD_CMD_APP_SD_SET_BUSWIDTH); - - if (errorstatus != SD_OK) - { - return(errorstatus); - } - return(errorstatus); - } - else - { - errorstatus = SD_REQUEST_NOT_APPLICABLE; - return(errorstatus); - } - } /*!< If wide bus operation to be disabled */ - else - { - /*!< If requested card supports 1 bit mode operation */ - if ((scr[1] & SD_SINGLE_BUS_SUPPORT) != SD_ALLZERO) - { - /*!< Send CMD55 APP_CMD with argument as card's RCA.*/ - SDIO_CmdInitStructure.SDIO_Argument = (uint32_t) RCA << 16; - SDIO_CmdInitStructure.SDIO_CmdIndex = SD_CMD_APP_CMD; - SDIO_CmdInitStructure.SDIO_Response = SDIO_Response_Short; - SDIO_CmdInitStructure.SDIO_Wait = SDIO_Wait_No; - SDIO_CmdInitStructure.SDIO_CPSM = SDIO_CPSM_Enable; - SDIO_SendCommand(&SDIO_CmdInitStructure); - - - errorstatus = CmdResp1Error(SD_CMD_APP_CMD); - - if (errorstatus != SD_OK) - { - return(errorstatus); - } - - /*!< Send ACMD6 APP_CMD with argument as 2 for wide bus mode */ - SDIO_CmdInitStructure.SDIO_Argument = 0x00; - SDIO_CmdInitStructure.SDIO_CmdIndex = SD_CMD_APP_SD_SET_BUSWIDTH; - SDIO_CmdInitStructure.SDIO_Response = SDIO_Response_Short; - SDIO_CmdInitStructure.SDIO_Wait = SDIO_Wait_No; - SDIO_CmdInitStructure.SDIO_CPSM = SDIO_CPSM_Enable; - SDIO_SendCommand(&SDIO_CmdInitStructure); - - errorstatus = CmdResp1Error(SD_CMD_APP_SD_SET_BUSWIDTH); - - if (errorstatus != SD_OK) - { - return(errorstatus); - } - - return(errorstatus); - } - else - { - errorstatus = SD_REQUEST_NOT_APPLICABLE; - return(errorstatus); - } - } -} - -/** - * @brief Checks if the SD card is in programming state. - * @param pstatus: pointer to the variable that will contain the SD card state. - * @retval SD_Error: SD Card Error code. - */ -static SD_Error IsCardProgramming(uint8_t *pstatus) -{ - SD_Error errorstatus = SD_OK; - __IO uint32_t respR1 = 0, status = 0; - - SDIO_CmdInitStructure.SDIO_Argument = (uint32_t) RCA << 16; - SDIO_CmdInitStructure.SDIO_CmdIndex = SD_CMD_SEND_STATUS; - SDIO_CmdInitStructure.SDIO_Response = SDIO_Response_Short; - SDIO_CmdInitStructure.SDIO_Wait = SDIO_Wait_No; - SDIO_CmdInitStructure.SDIO_CPSM = SDIO_CPSM_Enable; - SDIO_SendCommand(&SDIO_CmdInitStructure); - - status = SDIO->STA; - while (!(status & (SDIO_FLAG_CCRCFAIL | SDIO_FLAG_CMDREND | SDIO_FLAG_CTIMEOUT))) - { - status = SDIO->STA; - } - - if (status & SDIO_FLAG_CTIMEOUT) - { - errorstatus = SD_CMD_RSP_TIMEOUT; - SDIO_ClearFlag(SDIO_FLAG_CTIMEOUT); - return(errorstatus); - } - else if (status & SDIO_FLAG_CCRCFAIL) - { - errorstatus = SD_CMD_CRC_FAIL; - SDIO_ClearFlag(SDIO_FLAG_CCRCFAIL); - return(errorstatus); - } - - status = (uint32_t)SDIO_GetCommandResponse(); - - /*!< Check response received is of desired command */ - if (status != SD_CMD_SEND_STATUS) - { - errorstatus = SD_ILLEGAL_CMD; - return(errorstatus); - } - - /*!< Clear all the static flags */ - SDIO_ClearFlag(SDIO_STATIC_FLAGS); - - - /*!< We have received response, retrieve it for analysis */ - respR1 = SDIO_GetResponse(SDIO_RESP1); - - /*!< Find out card status */ - *pstatus = (uint8_t) ((respR1 >> 9) & 0x0000000F); - - if ((respR1 & SD_OCR_ERRORBITS) == SD_ALLZERO) - { - return(errorstatus); - } - - if (respR1 & SD_OCR_ADDR_OUT_OF_RANGE) - { - return(SD_ADDR_OUT_OF_RANGE); - } - - if (respR1 & SD_OCR_ADDR_MISALIGNED) - { - return(SD_ADDR_MISALIGNED); - } - - if (respR1 & SD_OCR_BLOCK_LEN_ERR) - { - return(SD_BLOCK_LEN_ERR); - } - - if (respR1 & SD_OCR_ERASE_SEQ_ERR) - { - return(SD_ERASE_SEQ_ERR); - } - - if (respR1 & SD_OCR_BAD_ERASE_PARAM) - { - return(SD_BAD_ERASE_PARAM); - } - - if (respR1 & SD_OCR_WRITE_PROT_VIOLATION) - { - return(SD_WRITE_PROT_VIOLATION); - } - - if (respR1 & SD_OCR_LOCK_UNLOCK_FAILED) - { - return(SD_LOCK_UNLOCK_FAILED); - } - - if (respR1 & SD_OCR_COM_CRC_FAILED) - { - return(SD_COM_CRC_FAILED); - } - - if (respR1 & SD_OCR_ILLEGAL_CMD) - { - return(SD_ILLEGAL_CMD); - } - - if (respR1 & SD_OCR_CARD_ECC_FAILED) - { - return(SD_CARD_ECC_FAILED); - } - - if (respR1 & SD_OCR_CC_ERROR) - { - return(SD_CC_ERROR); - } - - if (respR1 & SD_OCR_GENERAL_UNKNOWN_ERROR) - { - return(SD_GENERAL_UNKNOWN_ERROR); - } - - if (respR1 & SD_OCR_STREAM_READ_UNDERRUN) - { - return(SD_STREAM_READ_UNDERRUN); - } - - if (respR1 & SD_OCR_STREAM_WRITE_OVERRUN) - { - return(SD_STREAM_WRITE_OVERRUN); - } - - if (respR1 & SD_OCR_CID_CSD_OVERWRIETE) - { - return(SD_CID_CSD_OVERWRITE); - } - - if (respR1 & SD_OCR_WP_ERASE_SKIP) - { - return(SD_WP_ERASE_SKIP); - } - - if (respR1 & SD_OCR_CARD_ECC_DISABLED) - { - return(SD_CARD_ECC_DISABLED); - } - - if (respR1 & SD_OCR_ERASE_RESET) - { - return(SD_ERASE_RESET); - } - - if (respR1 & SD_OCR_AKE_SEQ_ERROR) - { - return(SD_AKE_SEQ_ERROR); - } - - return(errorstatus); -} - -/** - * @brief Find the SD card SCR register value. - * @param rca: selected card address. - * @param pscr: pointer to the buffer that will contain the SCR value. - * @retval SD_Error: SD Card Error code. - */ -static SD_Error FindSCR(uint16_t rca, uint32_t *pscr) -{ - uint32_t index = 0; - SD_Error errorstatus = SD_OK; - uint32_t tempscr[2] = {0, 0}; - - /*!< Set Block Size To 8 Bytes */ - /*!< Send CMD55 APP_CMD with argument as card's RCA */ - SDIO_CmdInitStructure.SDIO_Argument = (uint32_t)8; - SDIO_CmdInitStructure.SDIO_CmdIndex = SD_CMD_SET_BLOCKLEN; - SDIO_CmdInitStructure.SDIO_Response = SDIO_Response_Short; - SDIO_CmdInitStructure.SDIO_Wait = SDIO_Wait_No; - SDIO_CmdInitStructure.SDIO_CPSM = SDIO_CPSM_Enable; - SDIO_SendCommand(&SDIO_CmdInitStructure); - - errorstatus = CmdResp1Error(SD_CMD_SET_BLOCKLEN); - - if (errorstatus != SD_OK) - { - return(errorstatus); - } - - /*!< Send CMD55 APP_CMD with argument as card's RCA */ - SDIO_CmdInitStructure.SDIO_Argument = (uint32_t) RCA << 16; - SDIO_CmdInitStructure.SDIO_CmdIndex = SD_CMD_APP_CMD; - SDIO_CmdInitStructure.SDIO_Response = SDIO_Response_Short; - SDIO_CmdInitStructure.SDIO_Wait = SDIO_Wait_No; - SDIO_CmdInitStructure.SDIO_CPSM = SDIO_CPSM_Enable; - SDIO_SendCommand(&SDIO_CmdInitStructure); - - errorstatus = CmdResp1Error(SD_CMD_APP_CMD); - - if (errorstatus != SD_OK) - { - return(errorstatus); - } - SDIO_DataInitStructure.SDIO_DataTimeOut = SD_DATATIMEOUT; - SDIO_DataInitStructure.SDIO_DataLength = 8; - SDIO_DataInitStructure.SDIO_DataBlockSize = SDIO_DataBlockSize_8b; - SDIO_DataInitStructure.SDIO_TransferDir = SDIO_TransferDir_ToSDIO; - SDIO_DataInitStructure.SDIO_TransferMode = SDIO_TransferMode_Block; - SDIO_DataInitStructure.SDIO_DPSM = SDIO_DPSM_Enable; - SDIO_DataConfig(&SDIO_DataInitStructure); - - - /*!< Send ACMD51 SD_APP_SEND_SCR with argument as 0 */ - SDIO_CmdInitStructure.SDIO_Argument = 0x0; - SDIO_CmdInitStructure.SDIO_CmdIndex = SD_CMD_SD_APP_SEND_SCR; - SDIO_CmdInitStructure.SDIO_Response = SDIO_Response_Short; - SDIO_CmdInitStructure.SDIO_Wait = SDIO_Wait_No; - SDIO_CmdInitStructure.SDIO_CPSM = SDIO_CPSM_Enable; - SDIO_SendCommand(&SDIO_CmdInitStructure); - - errorstatus = CmdResp1Error(SD_CMD_SD_APP_SEND_SCR); - - if (errorstatus != SD_OK) - { - return(errorstatus); - } - - while (!(SDIO->STA & (SDIO_FLAG_RXOVERR | SDIO_FLAG_DCRCFAIL | SDIO_FLAG_DTIMEOUT | SDIO_FLAG_DBCKEND | SDIO_FLAG_STBITERR))) - { - if (SDIO_GetFlagStatus(SDIO_FLAG_RXDAVL) != RESET) - { - *(tempscr + index) = SDIO_ReadData(); - index++; - } - } - - if (SDIO_GetFlagStatus(SDIO_FLAG_DTIMEOUT) != RESET) - { - SDIO_ClearFlag(SDIO_FLAG_DTIMEOUT); - errorstatus = SD_DATA_TIMEOUT; - return(errorstatus); - } - else if (SDIO_GetFlagStatus(SDIO_FLAG_DCRCFAIL) != RESET) - { - SDIO_ClearFlag(SDIO_FLAG_DCRCFAIL); - errorstatus = SD_DATA_CRC_FAIL; - return(errorstatus); - } - else if (SDIO_GetFlagStatus(SDIO_FLAG_RXOVERR) != RESET) - { - SDIO_ClearFlag(SDIO_FLAG_RXOVERR); - errorstatus = SD_RX_OVERRUN; - return(errorstatus); - } - else if (SDIO_GetFlagStatus(SDIO_FLAG_STBITERR) != RESET) - { - SDIO_ClearFlag(SDIO_FLAG_STBITERR); - errorstatus = SD_START_BIT_ERR; - return(errorstatus); - } - - /*!< Clear all the static flags */ - SDIO_ClearFlag(SDIO_STATIC_FLAGS); - - *(pscr + 1) = ((tempscr[0] & SD_0TO7BITS) << 24) | ((tempscr[0] & SD_8TO15BITS) << 8) | ((tempscr[0] & SD_16TO23BITS) >> 8) | ((tempscr[0] & SD_24TO31BITS) >> 24); - - *(pscr) = ((tempscr[1] & SD_0TO7BITS) << 24) | ((tempscr[1] & SD_8TO15BITS) << 8) | ((tempscr[1] & SD_16TO23BITS) >> 8) | ((tempscr[1] & SD_24TO31BITS) >> 24); - - return(errorstatus); -} - -/** - * @brief Converts the number of bytes in power of two and returns the power. - * @param NumberOfBytes: number of bytes. - * @retval None - */ -uint8_t convert_from_bytes_to_power_of_two(uint16_t NumberOfBytes) -{ - uint8_t count = 0; - - while (NumberOfBytes != 1) - { - NumberOfBytes >>= 1; - count++; - } - return(count); -} - -/** -* @brief Switch mode High-Speed -* @note This function must be used after "Transfer State" -* @note This operation should be followed by the configuration -* of PLL to have SDIOCK clock between 67 and 75 MHz -* @param None -* @retval SD_Error: SD Card Error code. -*/ -SD_Error SD_HighSpeed (void) -{ - SD_Error errorstatus = SD_OK; - uint32_t scr[2] = {0, 0}; - uint32_t SD_SPEC = 0 ; - uint8_t hs[64] = {0} ; - uint32_t count = 0, *tempbuff = (uint32_t *)hs; - TransferError = SD_OK; - TransferEnd = 0; - StopCondition = 0; - - SDIO->DCTRL = 0x0; - - /*!< Get SCR Register */ - errorstatus = FindSCR(RCA, scr); - - if (errorstatus != SD_OK) - { - return(errorstatus); - } - - /* Test the Version supported by the card*/ - SD_SPEC = (scr[1] & 0x01000000)||(scr[1] & 0x02000000); - - if (SD_SPEC != SD_ALLZERO) - { - /* Set Block Size for Card */ - SDIO_CmdInitStructure.SDIO_Argument = (uint32_t)64; - SDIO_CmdInitStructure.SDIO_CmdIndex = SD_CMD_SET_BLOCKLEN; - SDIO_CmdInitStructure.SDIO_Response = SDIO_Response_Short; - SDIO_CmdInitStructure.SDIO_Wait = SDIO_Wait_No; - SDIO_CmdInitStructure.SDIO_CPSM = SDIO_CPSM_Enable; - SDIO_SendCommand(&SDIO_CmdInitStructure); - errorstatus = CmdResp1Error(SD_CMD_SET_BLOCKLEN); - if (errorstatus != SD_OK) - { - return(errorstatus); - } - SDIO_DataInitStructure.SDIO_DataTimeOut = SD_DATATIMEOUT; - SDIO_DataInitStructure.SDIO_DataLength = 64; - SDIO_DataInitStructure.SDIO_DataBlockSize = SDIO_DataBlockSize_64b ; - SDIO_DataInitStructure.SDIO_TransferDir = SDIO_TransferDir_ToSDIO; - SDIO_DataInitStructure.SDIO_TransferMode = SDIO_TransferMode_Block; - SDIO_DataInitStructure.SDIO_DPSM = SDIO_DPSM_Enable; - SDIO_DataConfig(&SDIO_DataInitStructure); - - /*!< Send CMD6 switch mode */ - SDIO_CmdInitStructure.SDIO_Argument = 0x80FFFF01; - SDIO_CmdInitStructure.SDIO_CmdIndex = SD_CMD_HS_SWITCH; - SDIO_CmdInitStructure.SDIO_Response = SDIO_Response_Short; - SDIO_CmdInitStructure.SDIO_Wait = SDIO_Wait_No; - SDIO_CmdInitStructure.SDIO_CPSM = SDIO_CPSM_Enable; - SDIO_SendCommand(&SDIO_CmdInitStructure); - errorstatus = CmdResp1Error(SD_CMD_HS_SWITCH); - - if (errorstatus != SD_OK) - { - return(errorstatus); - } - while (!(SDIO->STA &(SDIO_FLAG_RXOVERR | SDIO_FLAG_DCRCFAIL | SDIO_FLAG_DTIMEOUT | SDIO_FLAG_DBCKEND | SDIO_FLAG_STBITERR))) - { - if (SDIO_GetFlagStatus(SDIO_FLAG_RXFIFOHF) != RESET) - { - for (count = 0; count < 8; count++) - { - *(tempbuff + count) = SDIO_ReadData(); - } - tempbuff += 8; - } - } - - if (SDIO_GetFlagStatus(SDIO_FLAG_DTIMEOUT) != RESET) - { - SDIO_ClearFlag(SDIO_FLAG_DTIMEOUT); - errorstatus = SD_DATA_TIMEOUT; - return(errorstatus); - } - else if (SDIO_GetFlagStatus(SDIO_FLAG_DCRCFAIL) != RESET) - { - SDIO_ClearFlag(SDIO_FLAG_DCRCFAIL); - errorstatus = SD_DATA_CRC_FAIL; - return(errorstatus); - } - else if (SDIO_GetFlagStatus(SDIO_FLAG_RXOVERR) != RESET) - { - SDIO_ClearFlag(SDIO_FLAG_RXOVERR); - errorstatus = SD_RX_OVERRUN; - return(errorstatus); - } - else if (SDIO_GetFlagStatus(SDIO_FLAG_STBITERR) != RESET) - { - SDIO_ClearFlag(SDIO_FLAG_STBITERR); - errorstatus = SD_START_BIT_ERR; - return(errorstatus); - } - count = SD_DATATIMEOUT; - while ((SDIO_GetFlagStatus(SDIO_FLAG_RXDAVL) != RESET) && (count > 0)) - { - *tempbuff = SDIO_ReadData(); - tempbuff++; - count--; - } - - /*!< Clear all the static flags */ - SDIO_ClearFlag(SDIO_STATIC_FLAGS); - - /* Test if the switch mode HS is ok */ - if ((hs[13]& 0x2)==0x2) - { - errorstatus=SD_OK; - } - else - { - errorstatus=SD_UNSUPPORTED_FEATURE ; - } - } - return(errorstatus); -} - -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/stm/lib/stm324x7i_eval_sdio_sd.h b/stm/lib/stm324x7i_eval_sdio_sd.h deleted file mode 100644 index 31214385c..000000000 --- a/stm/lib/stm324x7i_eval_sdio_sd.h +++ /dev/null @@ -1,408 +0,0 @@ -/** - ****************************************************************************** - * @file stm324x7i_eval_sdio_sd.h - * @author MCD Application Team - * @version V1.0.0 - * @date 11-January-2013 - * @brief This file contains all the functions prototypes for the SD Card - * stm324x7i_eval_sdio_sd driver firmware library. - * - ****************************************************************************** - * @attention - * - *

© COPYRIGHT 2013 STMicroelectronics

- * - * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License"); - * You may not use this file except in compliance with the License. - * You may obtain a copy of the License at: - * - * http://www.st.com/software_license_agreement_liberty_v2 - * - * Unless required by applicable law or agreed to in writing, software - * distributed under the License is distributed on an "AS IS" BASIS, - * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - * See the License for the specific language governing permissions and - * limitations under the License. - * - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM324x7I_EVAL_SDIO_SD_H -#define __STM324x7I_EVAL_SDIO_SD_H - -#ifdef __cplusplus - extern "C" { -#endif - -/* Includes ------------------------------------------------------------------*/ -#include "stm324x7i_eval.h" - -/** @addtogroup Utilities - * @{ - */ - -/** @addtogroup STM32_EVAL - * @{ - */ - -/** @addtogroup STM324x7I_EVAL - * @{ - */ - -/** @addtogroup STM324x7I_EVAL_SDIO_SD - * @{ - */ - -/** @defgroup STM324x7I_EVAL_SDIO_SD_Exported_Types - * @{ - */ -typedef enum -{ -/** - * @brief SDIO specific error defines - */ - SD_CMD_CRC_FAIL = (1), /*!< Command response received (but CRC check failed) */ - SD_DATA_CRC_FAIL = (2), /*!< Data bock sent/received (CRC check Failed) */ - SD_CMD_RSP_TIMEOUT = (3), /*!< Command response timeout */ - SD_DATA_TIMEOUT = (4), /*!< Data time out */ - SD_TX_UNDERRUN = (5), /*!< Transmit FIFO under-run */ - SD_RX_OVERRUN = (6), /*!< Receive FIFO over-run */ - SD_START_BIT_ERR = (7), /*!< Start bit not detected on all data signals in widE bus mode */ - SD_CMD_OUT_OF_RANGE = (8), /*!< CMD's argument was out of range.*/ - SD_ADDR_MISALIGNED = (9), /*!< Misaligned address */ - SD_BLOCK_LEN_ERR = (10), /*!< Transferred block length is not allowed for the card or the number of transferred bytes does not match the block length */ - SD_ERASE_SEQ_ERR = (11), /*!< An error in the sequence of erase command occurs.*/ - SD_BAD_ERASE_PARAM = (12), /*!< An Invalid selection for erase groups */ - SD_WRITE_PROT_VIOLATION = (13), /*!< Attempt to program a write protect block */ - SD_LOCK_UNLOCK_FAILED = (14), /*!< Sequence or password error has been detected in unlock command or if there was an attempt to access a locked card */ - SD_COM_CRC_FAILED = (15), /*!< CRC check of the previous command failed */ - SD_ILLEGAL_CMD = (16), /*!< Command is not legal for the card state */ - SD_CARD_ECC_FAILED = (17), /*!< Card internal ECC was applied but failed to correct the data */ - SD_CC_ERROR = (18), /*!< Internal card controller error */ - SD_GENERAL_UNKNOWN_ERROR = (19), /*!< General or Unknown error */ - SD_STREAM_READ_UNDERRUN = (20), /*!< The card could not sustain data transfer in stream read operation. */ - SD_STREAM_WRITE_OVERRUN = (21), /*!< The card could not sustain data programming in stream mode */ - SD_CID_CSD_OVERWRITE = (22), /*!< CID/CSD overwrite error */ - SD_WP_ERASE_SKIP = (23), /*!< only partial address space was erased */ - SD_CARD_ECC_DISABLED = (24), /*!< Command has been executed without using internal ECC */ - SD_ERASE_RESET = (25), /*!< Erase sequence was cleared before executing because an out of erase sequence command was received */ - SD_AKE_SEQ_ERROR = (26), /*!< Error in sequence of authentication. */ - SD_INVALID_VOLTRANGE = (27), - SD_ADDR_OUT_OF_RANGE = (28), - SD_SWITCH_ERROR = (29), - SD_SDIO_DISABLED = (30), - SD_SDIO_FUNCTION_BUSY = (31), - SD_SDIO_FUNCTION_FAILED = (32), - SD_SDIO_UNKNOWN_FUNCTION = (33), - -/** - * @brief Standard error defines - */ - SD_INTERNAL_ERROR, - SD_NOT_CONFIGURED, - SD_REQUEST_PENDING, - SD_REQUEST_NOT_APPLICABLE, - SD_INVALID_PARAMETER, - SD_UNSUPPORTED_FEATURE, - SD_UNSUPPORTED_HW, - SD_ERROR, - SD_OK = 0 -} SD_Error; - -/** - * @brief SDIO Transfer state - */ -typedef enum -{ - SD_TRANSFER_OK = 0, - SD_TRANSFER_BUSY = 1, - SD_TRANSFER_ERROR -} SDTransferState; - -/** - * @brief SD Card States - */ -typedef enum -{ - SD_CARD_READY = ((uint32_t)0x00000001), - SD_CARD_IDENTIFICATION = ((uint32_t)0x00000002), - SD_CARD_STANDBY = ((uint32_t)0x00000003), - SD_CARD_TRANSFER = ((uint32_t)0x00000004), - SD_CARD_SENDING = ((uint32_t)0x00000005), - SD_CARD_RECEIVING = ((uint32_t)0x00000006), - SD_CARD_PROGRAMMING = ((uint32_t)0x00000007), - SD_CARD_DISCONNECTED = ((uint32_t)0x00000008), - SD_CARD_ERROR = ((uint32_t)0x000000FF) -}SDCardState; - - -/** - * @brief Card Specific Data: CSD Register - */ -typedef struct -{ - __IO uint8_t CSDStruct; /*!< CSD structure */ - __IO uint8_t SysSpecVersion; /*!< System specification version */ - __IO uint8_t Reserved1; /*!< Reserved */ - __IO uint8_t TAAC; /*!< Data read access-time 1 */ - __IO uint8_t NSAC; /*!< Data read access-time 2 in CLK cycles */ - __IO uint8_t MaxBusClkFrec; /*!< Max. bus clock frequency */ - __IO uint16_t CardComdClasses; /*!< Card command classes */ - __IO uint8_t RdBlockLen; /*!< Max. read data block length */ - __IO uint8_t PartBlockRead; /*!< Partial blocks for read allowed */ - __IO uint8_t WrBlockMisalign; /*!< Write block misalignment */ - __IO uint8_t RdBlockMisalign; /*!< Read block misalignment */ - __IO uint8_t DSRImpl; /*!< DSR implemented */ - __IO uint8_t Reserved2; /*!< Reserved */ - __IO uint32_t DeviceSize; /*!< Device Size */ - __IO uint8_t MaxRdCurrentVDDMin; /*!< Max. read current @ VDD min */ - __IO uint8_t MaxRdCurrentVDDMax; /*!< Max. read current @ VDD max */ - __IO uint8_t MaxWrCurrentVDDMin; /*!< Max. write current @ VDD min */ - __IO uint8_t MaxWrCurrentVDDMax; /*!< Max. write current @ VDD max */ - __IO uint8_t DeviceSizeMul; /*!< Device size multiplier */ - __IO uint8_t EraseGrSize; /*!< Erase group size */ - __IO uint8_t EraseGrMul; /*!< Erase group size multiplier */ - __IO uint8_t WrProtectGrSize; /*!< Write protect group size */ - __IO uint8_t WrProtectGrEnable; /*!< Write protect group enable */ - __IO uint8_t ManDeflECC; /*!< Manufacturer default ECC */ - __IO uint8_t WrSpeedFact; /*!< Write speed factor */ - __IO uint8_t MaxWrBlockLen; /*!< Max. write data block length */ - __IO uint8_t WriteBlockPaPartial; /*!< Partial blocks for write allowed */ - __IO uint8_t Reserved3; /*!< Reserded */ - __IO uint8_t ContentProtectAppli; /*!< Content protection application */ - __IO uint8_t FileFormatGrouop; /*!< File format group */ - __IO uint8_t CopyFlag; /*!< Copy flag (OTP) */ - __IO uint8_t PermWrProtect; /*!< Permanent write protection */ - __IO uint8_t TempWrProtect; /*!< Temporary write protection */ - __IO uint8_t FileFormat; /*!< File Format */ - __IO uint8_t ECC; /*!< ECC code */ - __IO uint8_t CSD_CRC; /*!< CSD CRC */ - __IO uint8_t Reserved4; /*!< always 1*/ -} SD_CSD; - -/** - * @brief Card Identification Data: CID Register - */ -typedef struct -{ - __IO uint8_t ManufacturerID; /*!< ManufacturerID */ - __IO uint16_t OEM_AppliID; /*!< OEM/Application ID */ - __IO uint32_t ProdName1; /*!< Product Name part1 */ - __IO uint8_t ProdName2; /*!< Product Name part2*/ - __IO uint8_t ProdRev; /*!< Product Revision */ - __IO uint32_t ProdSN; /*!< Product Serial Number */ - __IO uint8_t Reserved1; /*!< Reserved1 */ - __IO uint16_t ManufactDate; /*!< Manufacturing Date */ - __IO uint8_t CID_CRC; /*!< CID CRC */ - __IO uint8_t Reserved2; /*!< always 1 */ -} SD_CID; - -/** - * @brief SD Card Status - */ -typedef struct -{ - __IO uint8_t DAT_BUS_WIDTH; - __IO uint8_t SECURED_MODE; - __IO uint16_t SD_CARD_TYPE; - __IO uint32_t SIZE_OF_PROTECTED_AREA; - __IO uint8_t SPEED_CLASS; - __IO uint8_t PERFORMANCE_MOVE; - __IO uint8_t AU_SIZE; - __IO uint16_t ERASE_SIZE; - __IO uint8_t ERASE_TIMEOUT; - __IO uint8_t ERASE_OFFSET; -} SD_CardStatus; - - -/** - * @brief SD Card information - */ -typedef struct -{ - SD_CSD SD_csd; - SD_CID SD_cid; - uint64_t CardCapacity; /*!< Card Capacity */ - uint32_t CardBlockSize; /*!< Card Block Size */ - uint16_t RCA; - uint8_t CardType; -} SD_CardInfo; - -/** - * @} - */ - -/** @defgroup STM324x7I_EVAL_SDIO_SD_Exported_Constants - * @{ - */ - -/** - * @brief SDIO Commands Index - */ -#define SD_CMD_GO_IDLE_STATE ((uint8_t)0) -#define SD_CMD_SEND_OP_COND ((uint8_t)1) -#define SD_CMD_ALL_SEND_CID ((uint8_t)2) -#define SD_CMD_SET_REL_ADDR ((uint8_t)3) /*!< SDIO_SEND_REL_ADDR for SD Card */ -#define SD_CMD_SET_DSR ((uint8_t)4) -#define SD_CMD_SDIO_SEN_OP_COND ((uint8_t)5) -#define SD_CMD_HS_SWITCH ((uint8_t)6) -#define SD_CMD_SEL_DESEL_CARD ((uint8_t)7) -#define SD_CMD_HS_SEND_EXT_CSD ((uint8_t)8) -#define SD_CMD_SEND_CSD ((uint8_t)9) -#define SD_CMD_SEND_CID ((uint8_t)10) -#define SD_CMD_READ_DAT_UNTIL_STOP ((uint8_t)11) /*!< SD Card doesn't support it */ -#define SD_CMD_STOP_TRANSMISSION ((uint8_t)12) -#define SD_CMD_SEND_STATUS ((uint8_t)13) -#define SD_CMD_HS_BUSTEST_READ ((uint8_t)14) -#define SD_CMD_GO_INACTIVE_STATE ((uint8_t)15) -#define SD_CMD_SET_BLOCKLEN ((uint8_t)16) -#define SD_CMD_READ_SINGLE_BLOCK ((uint8_t)17) -#define SD_CMD_READ_MULT_BLOCK ((uint8_t)18) -#define SD_CMD_HS_BUSTEST_WRITE ((uint8_t)19) -#define SD_CMD_WRITE_DAT_UNTIL_STOP ((uint8_t)20) /*!< SD Card doesn't support it */ -#define SD_CMD_SET_BLOCK_COUNT ((uint8_t)23) /*!< SD Card doesn't support it */ -#define SD_CMD_WRITE_SINGLE_BLOCK ((uint8_t)24) -#define SD_CMD_WRITE_MULT_BLOCK ((uint8_t)25) -#define SD_CMD_PROG_CID ((uint8_t)26) /*!< reserved for manufacturers */ -#define SD_CMD_PROG_CSD ((uint8_t)27) -#define SD_CMD_SET_WRITE_PROT ((uint8_t)28) -#define SD_CMD_CLR_WRITE_PROT ((uint8_t)29) -#define SD_CMD_SEND_WRITE_PROT ((uint8_t)30) -#define SD_CMD_SD_ERASE_GRP_START ((uint8_t)32) /*!< To set the address of the first write - block to be erased. (For SD card only) */ -#define SD_CMD_SD_ERASE_GRP_END ((uint8_t)33) /*!< To set the address of the last write block of the - continuous range to be erased. (For SD card only) */ -#define SD_CMD_ERASE_GRP_START ((uint8_t)35) /*!< To set the address of the first write block to be erased. - (For MMC card only spec 3.31) */ - -#define SD_CMD_ERASE_GRP_END ((uint8_t)36) /*!< To set the address of the last write block of the - continuous range to be erased. (For MMC card only spec 3.31) */ - -#define SD_CMD_ERASE ((uint8_t)38) -#define SD_CMD_FAST_IO ((uint8_t)39) /*!< SD Card doesn't support it */ -#define SD_CMD_GO_IRQ_STATE ((uint8_t)40) /*!< SD Card doesn't support it */ -#define SD_CMD_LOCK_UNLOCK ((uint8_t)42) -#define SD_CMD_APP_CMD ((uint8_t)55) -#define SD_CMD_GEN_CMD ((uint8_t)56) -#define SD_CMD_NO_CMD ((uint8_t)64) - -/** - * @brief Following commands are SD Card Specific commands. - * SDIO_APP_CMD should be sent before sending these commands. - */ -#define SD_CMD_APP_SD_SET_BUSWIDTH ((uint8_t)6) /*!< For SD Card only */ -#define SD_CMD_SD_APP_STAUS ((uint8_t)13) /*!< For SD Card only */ -#define SD_CMD_SD_APP_SEND_NUM_WRITE_BLOCKS ((uint8_t)22) /*!< For SD Card only */ -#define SD_CMD_SD_APP_OP_COND ((uint8_t)41) /*!< For SD Card only */ -#define SD_CMD_SD_APP_SET_CLR_CARD_DETECT ((uint8_t)42) /*!< For SD Card only */ -#define SD_CMD_SD_APP_SEND_SCR ((uint8_t)51) /*!< For SD Card only */ -#define SD_CMD_SDIO_RW_DIRECT ((uint8_t)52) /*!< For SD I/O Card only */ -#define SD_CMD_SDIO_RW_EXTENDED ((uint8_t)53) /*!< For SD I/O Card only */ - -/** - * @brief Following commands are SD Card Specific security commands. - * SDIO_APP_CMD should be sent before sending these commands. - */ -#define SD_CMD_SD_APP_GET_MKB ((uint8_t)43) /*!< For SD Card only */ -#define SD_CMD_SD_APP_GET_MID ((uint8_t)44) /*!< For SD Card only */ -#define SD_CMD_SD_APP_SET_CER_RN1 ((uint8_t)45) /*!< For SD Card only */ -#define SD_CMD_SD_APP_GET_CER_RN2 ((uint8_t)46) /*!< For SD Card only */ -#define SD_CMD_SD_APP_SET_CER_RES2 ((uint8_t)47) /*!< For SD Card only */ -#define SD_CMD_SD_APP_GET_CER_RES1 ((uint8_t)48) /*!< For SD Card only */ -#define SD_CMD_SD_APP_SECURE_READ_MULTIPLE_BLOCK ((uint8_t)18) /*!< For SD Card only */ -#define SD_CMD_SD_APP_SECURE_WRITE_MULTIPLE_BLOCK ((uint8_t)25) /*!< For SD Card only */ -#define SD_CMD_SD_APP_SECURE_ERASE ((uint8_t)38) /*!< For SD Card only */ -#define SD_CMD_SD_APP_CHANGE_SECURE_AREA ((uint8_t)49) /*!< For SD Card only */ -#define SD_CMD_SD_APP_SECURE_WRITE_MKB ((uint8_t)48) /*!< For SD Card only */ - -/* Uncomment the following line to select the SDIO Data transfer mode */ -#if !defined (SD_DMA_MODE) && !defined (SD_POLLING_MODE) -/*#define SD_DMA_MODE ((uint32_t)0x00000000)*/ -#define SD_POLLING_MODE ((uint32_t)0x00000002) -#endif - -/** - * @brief SD detection on its memory slot - */ -#define SD_PRESENT ((uint8_t)0x01) -#define SD_NOT_PRESENT ((uint8_t)0x00) - -/** - * @brief Supported SD Memory Cards - */ -#define SDIO_STD_CAPACITY_SD_CARD_V1_1 ((uint32_t)0x00000000) -#define SDIO_STD_CAPACITY_SD_CARD_V2_0 ((uint32_t)0x00000001) -#define SDIO_HIGH_CAPACITY_SD_CARD ((uint32_t)0x00000002) -#define SDIO_MULTIMEDIA_CARD ((uint32_t)0x00000003) -#define SDIO_SECURE_DIGITAL_IO_CARD ((uint32_t)0x00000004) -#define SDIO_HIGH_SPEED_MULTIMEDIA_CARD ((uint32_t)0x00000005) -#define SDIO_SECURE_DIGITAL_IO_COMBO_CARD ((uint32_t)0x00000006) -#define SDIO_HIGH_CAPACITY_MMC_CARD ((uint32_t)0x00000007) - -/** - * @} - */ - -/** @defgroup STM324x7I_EVAL_SDIO_SD_Exported_Macros - * @{ - */ -/** - * @} - */ - -/** @defgroup STM324x7I_EVAL_SDIO_SD_Exported_Functions - * @{ - */ -void SD_DeInit(void); -SD_Error SD_Init(void); -SDTransferState SD_GetStatus(void); -SDCardState SD_GetState(void); -uint8_t SD_Detect(void); -SD_Error SD_PowerON(void); -SD_Error SD_PowerOFF(void); -SD_Error SD_InitializeCards(void); -SD_Error SD_GetCardInfo(SD_CardInfo *cardinfo); -SD_Error SD_GetCardStatus(SD_CardStatus *cardstatus); -SD_Error SD_EnableWideBusOperation(uint32_t WideMode); -SD_Error SD_SelectDeselect(uint64_t addr); -SD_Error SD_ReadBlock(uint8_t *readbuff, uint64_t ReadAddr, uint16_t BlockSize); -SD_Error SD_ReadMultiBlocks(uint8_t *readbuff, uint64_t ReadAddr, uint16_t BlockSize, uint32_t NumberOfBlocks); -SD_Error SD_WriteBlock(uint8_t *writebuff, uint64_t WriteAddr, uint16_t BlockSize); -SD_Error SD_WriteMultiBlocks(uint8_t *writebuff, uint64_t WriteAddr, uint16_t BlockSize, uint32_t NumberOfBlocks); -SDTransferState SD_GetTransferState(void); -SD_Error SD_StopTransfer(void); -SD_Error SD_Erase(uint64_t startaddr, uint64_t endaddr); -SD_Error SD_SendStatus(uint32_t *pcardstatus); -SD_Error SD_SendSDStatus(uint32_t *psdstatus); -SD_Error SD_ProcessIRQSrc(void); -void SD_ProcessDMAIRQ(void); -SD_Error SD_WaitReadOperation(void); -SD_Error SD_WaitWriteOperation(void); -SD_Error SD_HighSpeed(void); -#ifdef __cplusplus -} -#endif - -#endif /* __STM324x7I_EVAL_SDIO_SD_H */ -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/stm/lib/stm32f4xx.h b/stm/lib/stm32f4xx.h deleted file mode 100644 index 22b47f6b2..000000000 --- a/stm/lib/stm32f4xx.h +++ /dev/null @@ -1,9156 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f4xx.h - * @author MCD Application Team - * @version V1.3.0 - * @date 08-November-2013 - * @brief CMSIS Cortex-M4 Device Peripheral Access Layer Header File. - * This file contains all the peripheral register's definitions, bits - * definitions and memory mapping for STM32F4xx devices. - * - * The file is the unique include file that the application programmer - * is using in the C source code, usually in main.c. This file contains: - * - Configuration section that allows to select: - * - The device used in the target application - * - To use or not the peripheral’s drivers in application code(i.e. - * code will be based on direct access to peripheral’s registers - * rather than drivers API), this option is controlled by - * "#define USE_STDPERIPH_DRIVER" - * - To change few application-specific parameters such as the HSE - * crystal frequency - * - Data structures and the address mapping for all peripherals - * - Peripheral's registers declarations and bits definition - * - Macros to access peripheral’s registers hardware - * - ****************************************************************************** - * @attention - * - *

© COPYRIGHT 2013 STMicroelectronics

- * - * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License"); - * You may not use this file except in compliance with the License. - * You may obtain a copy of the License at: - * - * http://www.st.com/software_license_agreement_liberty_v2 - * - * Unless required by applicable law or agreed to in writing, software - * distributed under the License is distributed on an "AS IS" BASIS, - * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - * See the License for the specific language governing permissions and - * limitations under the License. - * - ****************************************************************************** - */ - -/** @addtogroup CMSIS - * @{ - */ - -/** @addtogroup stm32f4xx - * @{ - */ - -#ifndef __STM32F4xx_H -#define __STM32F4xx_H - -#ifdef __cplusplus - extern "C" { -#endif /* __cplusplus */ - -// dpgeorge: we include mpconfigport.h here because it contains the settings for the STM -#include "mpconfigport.h" - -/** @addtogroup Library_configuration_section - * @{ - */ - -/* Uncomment the line below according to the target STM32 device used in your - application - */ - -#if !defined (STM32F40_41xxx) && !defined (STM32F427_437xx) && !defined (STM32F429_439xx) && !defined (STM32F401xx) - /* #define STM32F40_41xxx */ /*!< STM32F405RG, STM32F405VG, STM32F405ZG, STM32F415RG, STM32F415VG, STM32F415ZG, - STM32F407VG, STM32F407VE, STM32F407ZG, STM32F407ZE, STM32F407IG, STM32F407IE, - STM32F417VG, STM32F417VE, STM32F417ZG, STM32F417ZE, STM32F417IG and STM32F417IE Devices */ - - /* #define STM32F427_437xx */ /*!< STM32F427VG, STM32F427VI, STM32F427ZG, STM32F427ZI, STM32F427IG, STM32F427II, - STM32F437VG, STM32F437VI, STM32F437ZG, STM32F437ZI, STM32F437IG, STM32F437II Devices */ - - /* #define STM32F429_439xx */ /*!< STM32F429VG, STM32F429VI, STM32F429ZG, STM32F429ZI, STM32F429BG, STM32F429BI, - STM32F429NG, STM32F439NI, STM32F429IG, STM32F429II, STM32F439VG, STM32F439VI, - STM32F439ZG, STM32F439ZI, STM32F439BG, STM32F439BI, STM32F439NG, STM32F439NI, - STM32F439IG and STM32F439II Devices */ - - /* #define STM32F401xx */ /*!< STM32F401CB, STM32F401CC, STM32F401RB, STM32F401RC, STM32F401VB, STM32F401VC - STM32F401CD, STM32F401RD, STM32F401VD, STM32F401CExx, STM32F401RE, STM32F401VE Devices */ - -#endif - -/* Old STM32F40XX definition, maintained for legacy purpose */ -#ifdef STM32F40XX - #define STM32F40_41xxx -#endif /* STM32F40XX */ - -/* Old STM32F427X definition, maintained for legacy purpose */ -#ifdef STM32F427X - #define STM32F427_437xx -#endif /* STM32F427X */ - -/* Tip: To avoid modifying this file each time you need to switch between these - devices, you can define the device in your toolchain compiler preprocessor. - */ - -#if !defined (STM32F40_41xxx) && !defined (STM32F427_437xx) && !defined (STM32F429_439xx) && !defined (STM32F401xx) - #error "Please select first the target STM32F4xx device used in your application (in stm32f4xx.h file)" -#endif - -#if !defined (USE_STDPERIPH_DRIVER) -/** - * @brief Comment the line below if you will not use the peripherals drivers. - In this case, these drivers will not be included and the application code will - be based on direct access to peripherals registers - */ - /*#define USE_STDPERIPH_DRIVER */ -#endif /* USE_STDPERIPH_DRIVER */ - -/** - * @brief In the following line adjust the value of External High Speed oscillator (HSE) - used in your application - - Tip: To avoid modifying this file each time you need to use different HSE, you - can define the HSE value in your toolchain compiler preprocessor. - */ - -#if !defined (HSE_VALUE) - #define HSE_VALUE ((uint32_t)25000000) /*!< Value of the External oscillator in Hz */ - -#endif /* HSE_VALUE */ - -/** - * @brief In the following line adjust the External High Speed oscillator (HSE) Startup - Timeout value - */ -#if !defined (HSE_STARTUP_TIMEOUT) - #define HSE_STARTUP_TIMEOUT ((uint16_t)0x05000) /*!< Time out for HSE start up */ -#endif /* HSE_STARTUP_TIMEOUT */ - -#if !defined (HSI_VALUE) - #define HSI_VALUE ((uint32_t)16000000) /*!< Value of the Internal oscillator in Hz*/ -#endif /* HSI_VALUE */ - -/** - * @brief STM32F4XX Standard Peripherals Library version number V1.3.0 - */ -#define __STM32F4XX_STDPERIPH_VERSION_MAIN (0x01) /*!< [31:24] main version */ -#define __STM32F4XX_STDPERIPH_VERSION_SUB1 (0x03) /*!< [23:16] sub1 version */ -#define __STM32F4XX_STDPERIPH_VERSION_SUB2 (0x00) /*!< [15:8] sub2 version */ -#define __STM32F4XX_STDPERIPH_VERSION_RC (0x00) /*!< [7:0] release candidate */ -#define __STM32F4XX_STDPERIPH_VERSION ((__STM32F4XX_STDPERIPH_VERSION_MAIN << 24)\ - |(__STM32F4XX_STDPERIPH_VERSION_SUB1 << 16)\ - |(__STM32F4XX_STDPERIPH_VERSION_SUB2 << 8)\ - |(__STM32F4XX_STDPERIPH_VERSION_RC)) - -/** - * @} - */ - -/** @addtogroup Configuration_section_for_CMSIS - * @{ - */ - -/** - * @brief Configuration of the Cortex-M4 Processor and Core Peripherals - */ -#define __CM4_REV 0x0001 /*!< Core revision r0p1 */ -#define __MPU_PRESENT 1 /*!< STM32F4XX provides an MPU */ -#define __NVIC_PRIO_BITS 4 /*!< STM32F4XX uses 4 Bits for the Priority Levels */ -#define __Vendor_SysTickConfig 0 /*!< Set to 1 if different SysTick Config is used */ -#define __FPU_PRESENT 1 /*!< FPU present */ - -/** - * @brief STM32F4XX Interrupt Number Definition, according to the selected device - * in @ref Library_configuration_section - */ -typedef enum IRQn -{ -/****** Cortex-M4 Processor Exceptions Numbers ****************************************************************/ - NonMaskableInt_IRQn = -14, /*!< 2 Non Maskable Interrupt */ - MemoryManagement_IRQn = -12, /*!< 4 Cortex-M4 Memory Management Interrupt */ - BusFault_IRQn = -11, /*!< 5 Cortex-M4 Bus Fault Interrupt */ - UsageFault_IRQn = -10, /*!< 6 Cortex-M4 Usage Fault Interrupt */ - SVCall_IRQn = -5, /*!< 11 Cortex-M4 SV Call Interrupt */ - DebugMonitor_IRQn = -4, /*!< 12 Cortex-M4 Debug Monitor Interrupt */ - PendSV_IRQn = -2, /*!< 14 Cortex-M4 Pend SV Interrupt */ - SysTick_IRQn = -1, /*!< 15 Cortex-M4 System Tick Interrupt */ -/****** STM32 specific Interrupt Numbers **********************************************************************/ - WWDG_IRQn = 0, /*!< Window WatchDog Interrupt */ - PVD_IRQn = 1, /*!< PVD through EXTI Line detection Interrupt */ - TAMP_STAMP_IRQn = 2, /*!< Tamper and TimeStamp interrupts through the EXTI line */ - RTC_WKUP_IRQn = 3, /*!< RTC Wakeup interrupt through the EXTI line */ - FLASH_IRQn = 4, /*!< FLASH global Interrupt */ - RCC_IRQn = 5, /*!< RCC global Interrupt */ - EXTI0_IRQn = 6, /*!< EXTI Line0 Interrupt */ - EXTI1_IRQn = 7, /*!< EXTI Line1 Interrupt */ - EXTI2_IRQn = 8, /*!< EXTI Line2 Interrupt */ - EXTI3_IRQn = 9, /*!< EXTI Line3 Interrupt */ - EXTI4_IRQn = 10, /*!< EXTI Line4 Interrupt */ - DMA1_Stream0_IRQn = 11, /*!< DMA1 Stream 0 global Interrupt */ - DMA1_Stream1_IRQn = 12, /*!< DMA1 Stream 1 global Interrupt */ - DMA1_Stream2_IRQn = 13, /*!< DMA1 Stream 2 global Interrupt */ - DMA1_Stream3_IRQn = 14, /*!< DMA1 Stream 3 global Interrupt */ - DMA1_Stream4_IRQn = 15, /*!< DMA1 Stream 4 global Interrupt */ - DMA1_Stream5_IRQn = 16, /*!< DMA1 Stream 5 global Interrupt */ - DMA1_Stream6_IRQn = 17, /*!< DMA1 Stream 6 global Interrupt */ - ADC_IRQn = 18, /*!< ADC1, ADC2 and ADC3 global Interrupts */ - -#if defined (STM32F40_41xxx) - CAN1_TX_IRQn = 19, /*!< CAN1 TX Interrupt */ - CAN1_RX0_IRQn = 20, /*!< CAN1 RX0 Interrupt */ - CAN1_RX1_IRQn = 21, /*!< CAN1 RX1 Interrupt */ - CAN1_SCE_IRQn = 22, /*!< CAN1 SCE Interrupt */ - EXTI9_5_IRQn = 23, /*!< External Line[9:5] Interrupts */ - TIM1_BRK_TIM9_IRQn = 24, /*!< TIM1 Break interrupt and TIM9 global interrupt */ - TIM1_UP_TIM10_IRQn = 25, /*!< TIM1 Update Interrupt and TIM10 global interrupt */ - TIM1_TRG_COM_TIM11_IRQn = 26, /*!< TIM1 Trigger and Commutation Interrupt and TIM11 global interrupt */ - TIM1_CC_IRQn = 27, /*!< TIM1 Capture Compare Interrupt */ - TIM2_IRQn = 28, /*!< TIM2 global Interrupt */ - TIM3_IRQn = 29, /*!< TIM3 global Interrupt */ - TIM4_IRQn = 30, /*!< TIM4 global Interrupt */ - I2C1_EV_IRQn = 31, /*!< I2C1 Event Interrupt */ - I2C1_ER_IRQn = 32, /*!< I2C1 Error Interrupt */ - I2C2_EV_IRQn = 33, /*!< I2C2 Event Interrupt */ - I2C2_ER_IRQn = 34, /*!< I2C2 Error Interrupt */ - SPI1_IRQn = 35, /*!< SPI1 global Interrupt */ - SPI2_IRQn = 36, /*!< SPI2 global Interrupt */ - USART1_IRQn = 37, /*!< USART1 global Interrupt */ - USART2_IRQn = 38, /*!< USART2 global Interrupt */ - USART3_IRQn = 39, /*!< USART3 global Interrupt */ - EXTI15_10_IRQn = 40, /*!< External Line[15:10] Interrupts */ - RTC_Alarm_IRQn = 41, /*!< RTC Alarm (A and B) through EXTI Line Interrupt */ - OTG_FS_WKUP_IRQn = 42, /*!< USB OTG FS Wakeup through EXTI line interrupt */ - TIM8_BRK_TIM12_IRQn = 43, /*!< TIM8 Break Interrupt and TIM12 global interrupt */ - TIM8_UP_TIM13_IRQn = 44, /*!< TIM8 Update Interrupt and TIM13 global interrupt */ - TIM8_TRG_COM_TIM14_IRQn = 45, /*!< TIM8 Trigger and Commutation Interrupt and TIM14 global interrupt */ - TIM8_CC_IRQn = 46, /*!< TIM8 Capture Compare Interrupt */ - DMA1_Stream7_IRQn = 47, /*!< DMA1 Stream7 Interrupt */ - FSMC_IRQn = 48, /*!< FSMC global Interrupt */ - SDIO_IRQn = 49, /*!< SDIO global Interrupt */ - TIM5_IRQn = 50, /*!< TIM5 global Interrupt */ - SPI3_IRQn = 51, /*!< SPI3 global Interrupt */ - UART4_IRQn = 52, /*!< UART4 global Interrupt */ - UART5_IRQn = 53, /*!< UART5 global Interrupt */ - TIM6_DAC_IRQn = 54, /*!< TIM6 global and DAC1&2 underrun error interrupts */ - TIM7_IRQn = 55, /*!< TIM7 global interrupt */ - DMA2_Stream0_IRQn = 56, /*!< DMA2 Stream 0 global Interrupt */ - DMA2_Stream1_IRQn = 57, /*!< DMA2 Stream 1 global Interrupt */ - DMA2_Stream2_IRQn = 58, /*!< DMA2 Stream 2 global Interrupt */ - DMA2_Stream3_IRQn = 59, /*!< DMA2 Stream 3 global Interrupt */ - DMA2_Stream4_IRQn = 60, /*!< DMA2 Stream 4 global Interrupt */ - ETH_IRQn = 61, /*!< Ethernet global Interrupt */ - ETH_WKUP_IRQn = 62, /*!< Ethernet Wakeup through EXTI line Interrupt */ - CAN2_TX_IRQn = 63, /*!< CAN2 TX Interrupt */ - CAN2_RX0_IRQn = 64, /*!< CAN2 RX0 Interrupt */ - CAN2_RX1_IRQn = 65, /*!< CAN2 RX1 Interrupt */ - CAN2_SCE_IRQn = 66, /*!< CAN2 SCE Interrupt */ - OTG_FS_IRQn = 67, /*!< USB OTG FS global Interrupt */ - DMA2_Stream5_IRQn = 68, /*!< DMA2 Stream 5 global interrupt */ - DMA2_Stream6_IRQn = 69, /*!< DMA2 Stream 6 global interrupt */ - DMA2_Stream7_IRQn = 70, /*!< DMA2 Stream 7 global interrupt */ - USART6_IRQn = 71, /*!< USART6 global interrupt */ - I2C3_EV_IRQn = 72, /*!< I2C3 event interrupt */ - I2C3_ER_IRQn = 73, /*!< I2C3 error interrupt */ - OTG_HS_EP1_OUT_IRQn = 74, /*!< USB OTG HS End Point 1 Out global interrupt */ - OTG_HS_EP1_IN_IRQn = 75, /*!< USB OTG HS End Point 1 In global interrupt */ - OTG_HS_WKUP_IRQn = 76, /*!< USB OTG HS Wakeup through EXTI interrupt */ - OTG_HS_IRQn = 77, /*!< USB OTG HS global interrupt */ - DCMI_IRQn = 78, /*!< DCMI global interrupt */ - CRYP_IRQn = 79, /*!< CRYP crypto global interrupt */ - HASH_RNG_IRQn = 80, /*!< Hash and Rng global interrupt */ - FPU_IRQn = 81 /*!< FPU global interrupt */ -#endif /* STM32F40_41xxx */ - -#if defined (STM32F427_437xx) - CAN1_TX_IRQn = 19, /*!< CAN1 TX Interrupt */ - CAN1_RX0_IRQn = 20, /*!< CAN1 RX0 Interrupt */ - CAN1_RX1_IRQn = 21, /*!< CAN1 RX1 Interrupt */ - CAN1_SCE_IRQn = 22, /*!< CAN1 SCE Interrupt */ - EXTI9_5_IRQn = 23, /*!< External Line[9:5] Interrupts */ - TIM1_BRK_TIM9_IRQn = 24, /*!< TIM1 Break interrupt and TIM9 global interrupt */ - TIM1_UP_TIM10_IRQn = 25, /*!< TIM1 Update Interrupt and TIM10 global interrupt */ - TIM1_TRG_COM_TIM11_IRQn = 26, /*!< TIM1 Trigger and Commutation Interrupt and TIM11 global interrupt */ - TIM1_CC_IRQn = 27, /*!< TIM1 Capture Compare Interrupt */ - TIM2_IRQn = 28, /*!< TIM2 global Interrupt */ - TIM3_IRQn = 29, /*!< TIM3 global Interrupt */ - TIM4_IRQn = 30, /*!< TIM4 global Interrupt */ - I2C1_EV_IRQn = 31, /*!< I2C1 Event Interrupt */ - I2C1_ER_IRQn = 32, /*!< I2C1 Error Interrupt */ - I2C2_EV_IRQn = 33, /*!< I2C2 Event Interrupt */ - I2C2_ER_IRQn = 34, /*!< I2C2 Error Interrupt */ - SPI1_IRQn = 35, /*!< SPI1 global Interrupt */ - SPI2_IRQn = 36, /*!< SPI2 global Interrupt */ - USART1_IRQn = 37, /*!< USART1 global Interrupt */ - USART2_IRQn = 38, /*!< USART2 global Interrupt */ - USART3_IRQn = 39, /*!< USART3 global Interrupt */ - EXTI15_10_IRQn = 40, /*!< External Line[15:10] Interrupts */ - RTC_Alarm_IRQn = 41, /*!< RTC Alarm (A and B) through EXTI Line Interrupt */ - OTG_FS_WKUP_IRQn = 42, /*!< USB OTG FS Wakeup through EXTI line interrupt */ - TIM8_BRK_TIM12_IRQn = 43, /*!< TIM8 Break Interrupt and TIM12 global interrupt */ - TIM8_UP_TIM13_IRQn = 44, /*!< TIM8 Update Interrupt and TIM13 global interrupt */ - TIM8_TRG_COM_TIM14_IRQn = 45, /*!< TIM8 Trigger and Commutation Interrupt and TIM14 global interrupt */ - TIM8_CC_IRQn = 46, /*!< TIM8 Capture Compare Interrupt */ - DMA1_Stream7_IRQn = 47, /*!< DMA1 Stream7 Interrupt */ - FMC_IRQn = 48, /*!< FMC global Interrupt */ - SDIO_IRQn = 49, /*!< SDIO global Interrupt */ - TIM5_IRQn = 50, /*!< TIM5 global Interrupt */ - SPI3_IRQn = 51, /*!< SPI3 global Interrupt */ - UART4_IRQn = 52, /*!< UART4 global Interrupt */ - UART5_IRQn = 53, /*!< UART5 global Interrupt */ - TIM6_DAC_IRQn = 54, /*!< TIM6 global and DAC1&2 underrun error interrupts */ - TIM7_IRQn = 55, /*!< TIM7 global interrupt */ - DMA2_Stream0_IRQn = 56, /*!< DMA2 Stream 0 global Interrupt */ - DMA2_Stream1_IRQn = 57, /*!< DMA2 Stream 1 global Interrupt */ - DMA2_Stream2_IRQn = 58, /*!< DMA2 Stream 2 global Interrupt */ - DMA2_Stream3_IRQn = 59, /*!< DMA2 Stream 3 global Interrupt */ - DMA2_Stream4_IRQn = 60, /*!< DMA2 Stream 4 global Interrupt */ - ETH_IRQn = 61, /*!< Ethernet global Interrupt */ - ETH_WKUP_IRQn = 62, /*!< Ethernet Wakeup through EXTI line Interrupt */ - CAN2_TX_IRQn = 63, /*!< CAN2 TX Interrupt */ - CAN2_RX0_IRQn = 64, /*!< CAN2 RX0 Interrupt */ - CAN2_RX1_IRQn = 65, /*!< CAN2 RX1 Interrupt */ - CAN2_SCE_IRQn = 66, /*!< CAN2 SCE Interrupt */ - OTG_FS_IRQn = 67, /*!< USB OTG FS global Interrupt */ - DMA2_Stream5_IRQn = 68, /*!< DMA2 Stream 5 global interrupt */ - DMA2_Stream6_IRQn = 69, /*!< DMA2 Stream 6 global interrupt */ - DMA2_Stream7_IRQn = 70, /*!< DMA2 Stream 7 global interrupt */ - USART6_IRQn = 71, /*!< USART6 global interrupt */ - I2C3_EV_IRQn = 72, /*!< I2C3 event interrupt */ - I2C3_ER_IRQn = 73, /*!< I2C3 error interrupt */ - OTG_HS_EP1_OUT_IRQn = 74, /*!< USB OTG HS End Point 1 Out global interrupt */ - OTG_HS_EP1_IN_IRQn = 75, /*!< USB OTG HS End Point 1 In global interrupt */ - OTG_HS_WKUP_IRQn = 76, /*!< USB OTG HS Wakeup through EXTI interrupt */ - OTG_HS_IRQn = 77, /*!< USB OTG HS global interrupt */ - DCMI_IRQn = 78, /*!< DCMI global interrupt */ - CRYP_IRQn = 79, /*!< CRYP crypto global interrupt */ - HASH_RNG_IRQn = 80, /*!< Hash and Rng global interrupt */ - FPU_IRQn = 81, /*!< FPU global interrupt */ - UART7_IRQn = 82, /*!< UART7 global interrupt */ - UART8_IRQn = 83, /*!< UART8 global interrupt */ - SPI4_IRQn = 84, /*!< SPI4 global Interrupt */ - SPI5_IRQn = 85, /*!< SPI5 global Interrupt */ - SPI6_IRQn = 86, /*!< SPI6 global Interrupt */ - SAI1_IRQn = 87, /*!< SAI1 global Interrupt */ - DMA2D_IRQn = 90 /*!< DMA2D global Interrupt */ -#endif /* STM32F427_437xx */ - -#if defined (STM32F429_439xx) - CAN1_TX_IRQn = 19, /*!< CAN1 TX Interrupt */ - CAN1_RX0_IRQn = 20, /*!< CAN1 RX0 Interrupt */ - CAN1_RX1_IRQn = 21, /*!< CAN1 RX1 Interrupt */ - CAN1_SCE_IRQn = 22, /*!< CAN1 SCE Interrupt */ - EXTI9_5_IRQn = 23, /*!< External Line[9:5] Interrupts */ - TIM1_BRK_TIM9_IRQn = 24, /*!< TIM1 Break interrupt and TIM9 global interrupt */ - TIM1_UP_TIM10_IRQn = 25, /*!< TIM1 Update Interrupt and TIM10 global interrupt */ - TIM1_TRG_COM_TIM11_IRQn = 26, /*!< TIM1 Trigger and Commutation Interrupt and TIM11 global interrupt */ - TIM1_CC_IRQn = 27, /*!< TIM1 Capture Compare Interrupt */ - TIM2_IRQn = 28, /*!< TIM2 global Interrupt */ - TIM3_IRQn = 29, /*!< TIM3 global Interrupt */ - TIM4_IRQn = 30, /*!< TIM4 global Interrupt */ - I2C1_EV_IRQn = 31, /*!< I2C1 Event Interrupt */ - I2C1_ER_IRQn = 32, /*!< I2C1 Error Interrupt */ - I2C2_EV_IRQn = 33, /*!< I2C2 Event Interrupt */ - I2C2_ER_IRQn = 34, /*!< I2C2 Error Interrupt */ - SPI1_IRQn = 35, /*!< SPI1 global Interrupt */ - SPI2_IRQn = 36, /*!< SPI2 global Interrupt */ - USART1_IRQn = 37, /*!< USART1 global Interrupt */ - USART2_IRQn = 38, /*!< USART2 global Interrupt */ - USART3_IRQn = 39, /*!< USART3 global Interrupt */ - EXTI15_10_IRQn = 40, /*!< External Line[15:10] Interrupts */ - RTC_Alarm_IRQn = 41, /*!< RTC Alarm (A and B) through EXTI Line Interrupt */ - OTG_FS_WKUP_IRQn = 42, /*!< USB OTG FS Wakeup through EXTI line interrupt */ - TIM8_BRK_TIM12_IRQn = 43, /*!< TIM8 Break Interrupt and TIM12 global interrupt */ - TIM8_UP_TIM13_IRQn = 44, /*!< TIM8 Update Interrupt and TIM13 global interrupt */ - TIM8_TRG_COM_TIM14_IRQn = 45, /*!< TIM8 Trigger and Commutation Interrupt and TIM14 global interrupt */ - TIM8_CC_IRQn = 46, /*!< TIM8 Capture Compare Interrupt */ - DMA1_Stream7_IRQn = 47, /*!< DMA1 Stream7 Interrupt */ - FMC_IRQn = 48, /*!< FMC global Interrupt */ - SDIO_IRQn = 49, /*!< SDIO global Interrupt */ - TIM5_IRQn = 50, /*!< TIM5 global Interrupt */ - SPI3_IRQn = 51, /*!< SPI3 global Interrupt */ - UART4_IRQn = 52, /*!< UART4 global Interrupt */ - UART5_IRQn = 53, /*!< UART5 global Interrupt */ - TIM6_DAC_IRQn = 54, /*!< TIM6 global and DAC1&2 underrun error interrupts */ - TIM7_IRQn = 55, /*!< TIM7 global interrupt */ - DMA2_Stream0_IRQn = 56, /*!< DMA2 Stream 0 global Interrupt */ - DMA2_Stream1_IRQn = 57, /*!< DMA2 Stream 1 global Interrupt */ - DMA2_Stream2_IRQn = 58, /*!< DMA2 Stream 2 global Interrupt */ - DMA2_Stream3_IRQn = 59, /*!< DMA2 Stream 3 global Interrupt */ - DMA2_Stream4_IRQn = 60, /*!< DMA2 Stream 4 global Interrupt */ - ETH_IRQn = 61, /*!< Ethernet global Interrupt */ - ETH_WKUP_IRQn = 62, /*!< Ethernet Wakeup through EXTI line Interrupt */ - CAN2_TX_IRQn = 63, /*!< CAN2 TX Interrupt */ - CAN2_RX0_IRQn = 64, /*!< CAN2 RX0 Interrupt */ - CAN2_RX1_IRQn = 65, /*!< CAN2 RX1 Interrupt */ - CAN2_SCE_IRQn = 66, /*!< CAN2 SCE Interrupt */ - OTG_FS_IRQn = 67, /*!< USB OTG FS global Interrupt */ - DMA2_Stream5_IRQn = 68, /*!< DMA2 Stream 5 global interrupt */ - DMA2_Stream6_IRQn = 69, /*!< DMA2 Stream 6 global interrupt */ - DMA2_Stream7_IRQn = 70, /*!< DMA2 Stream 7 global interrupt */ - USART6_IRQn = 71, /*!< USART6 global interrupt */ - I2C3_EV_IRQn = 72, /*!< I2C3 event interrupt */ - I2C3_ER_IRQn = 73, /*!< I2C3 error interrupt */ - OTG_HS_EP1_OUT_IRQn = 74, /*!< USB OTG HS End Point 1 Out global interrupt */ - OTG_HS_EP1_IN_IRQn = 75, /*!< USB OTG HS End Point 1 In global interrupt */ - OTG_HS_WKUP_IRQn = 76, /*!< USB OTG HS Wakeup through EXTI interrupt */ - OTG_HS_IRQn = 77, /*!< USB OTG HS global interrupt */ - DCMI_IRQn = 78, /*!< DCMI global interrupt */ - CRYP_IRQn = 79, /*!< CRYP crypto global interrupt */ - HASH_RNG_IRQn = 80, /*!< Hash and Rng global interrupt */ - FPU_IRQn = 81, /*!< FPU global interrupt */ - UART7_IRQn = 82, /*!< UART7 global interrupt */ - UART8_IRQn = 83, /*!< UART8 global interrupt */ - SPI4_IRQn = 84, /*!< SPI4 global Interrupt */ - SPI5_IRQn = 85, /*!< SPI5 global Interrupt */ - SPI6_IRQn = 86, /*!< SPI6 global Interrupt */ - SAI1_IRQn = 87, /*!< SAI1 global Interrupt */ - LTDC_IRQn = 88, /*!< LTDC global Interrupt */ - LTDC_ER_IRQn = 89, /*!< LTDC Error global Interrupt */ - DMA2D_IRQn = 90 /*!< DMA2D global Interrupt */ -#endif /* STM32F429_439xx */ - -#if defined (STM32F401xx) - EXTI9_5_IRQn = 23, /*!< External Line[9:5] Interrupts */ - TIM1_BRK_TIM9_IRQn = 24, /*!< TIM1 Break interrupt and TIM9 global interrupt */ - TIM1_UP_TIM10_IRQn = 25, /*!< TIM1 Update Interrupt and TIM10 global interrupt */ - TIM1_TRG_COM_TIM11_IRQn = 26, /*!< TIM1 Trigger and Commutation Interrupt and TIM11 global interrupt */ - TIM1_CC_IRQn = 27, /*!< TIM1 Capture Compare Interrupt */ - TIM2_IRQn = 28, /*!< TIM2 global Interrupt */ - TIM3_IRQn = 29, /*!< TIM3 global Interrupt */ - TIM4_IRQn = 30, /*!< TIM4 global Interrupt */ - I2C1_EV_IRQn = 31, /*!< I2C1 Event Interrupt */ - I2C1_ER_IRQn = 32, /*!< I2C1 Error Interrupt */ - I2C2_EV_IRQn = 33, /*!< I2C2 Event Interrupt */ - I2C2_ER_IRQn = 34, /*!< I2C2 Error Interrupt */ - SPI1_IRQn = 35, /*!< SPI1 global Interrupt */ - SPI2_IRQn = 36, /*!< SPI2 global Interrupt */ - USART1_IRQn = 37, /*!< USART1 global Interrupt */ - USART2_IRQn = 38, /*!< USART2 global Interrupt */ - EXTI15_10_IRQn = 40, /*!< External Line[15:10] Interrupts */ - RTC_Alarm_IRQn = 41, /*!< RTC Alarm (A and B) through EXTI Line Interrupt */ - OTG_FS_WKUP_IRQn = 42, /*!< USB OTG FS Wakeup through EXTI line interrupt */ - DMA1_Stream7_IRQn = 47, /*!< DMA1 Stream7 Interrupt */ - SDIO_IRQn = 49, /*!< SDIO global Interrupt */ - TIM5_IRQn = 50, /*!< TIM5 global Interrupt */ - SPI3_IRQn = 51, /*!< SPI3 global Interrupt */ - DMA2_Stream0_IRQn = 56, /*!< DMA2 Stream 0 global Interrupt */ - DMA2_Stream1_IRQn = 57, /*!< DMA2 Stream 1 global Interrupt */ - DMA2_Stream2_IRQn = 58, /*!< DMA2 Stream 2 global Interrupt */ - DMA2_Stream3_IRQn = 59, /*!< DMA2 Stream 3 global Interrupt */ - DMA2_Stream4_IRQn = 60, /*!< DMA2 Stream 4 global Interrupt */ - OTG_FS_IRQn = 67, /*!< USB OTG FS global Interrupt */ - DMA2_Stream5_IRQn = 68, /*!< DMA2 Stream 5 global interrupt */ - DMA2_Stream6_IRQn = 69, /*!< DMA2 Stream 6 global interrupt */ - DMA2_Stream7_IRQn = 70, /*!< DMA2 Stream 7 global interrupt */ - USART6_IRQn = 71, /*!< USART6 global interrupt */ - I2C3_EV_IRQn = 72, /*!< I2C3 event interrupt */ - I2C3_ER_IRQn = 73, /*!< I2C3 error interrupt */ - FPU_IRQn = 81, /*!< FPU global interrupt */ - SPI4_IRQn = 84 /*!< SPI4 global Interrupt */ -#endif /* STM32F401xx */ - -} IRQn_Type; - -/** - * @} - */ - -#include "core_cm4.h" /* Cortex-M4 processor and core peripherals */ -#include "system_stm32f4xx.h" -#include - -/** @addtogroup Exported_types - * @{ - */ -/*!< STM32F10x Standard Peripheral Library old types (maintained for legacy purpose) */ -typedef int32_t s32; -typedef int16_t s16; -typedef int8_t s8; - -typedef const int32_t sc32; /*!< Read Only */ -typedef const int16_t sc16; /*!< Read Only */ -typedef const int8_t sc8; /*!< Read Only */ - -typedef __IO int32_t vs32; -typedef __IO int16_t vs16; -typedef __IO int8_t vs8; - -typedef __I int32_t vsc32; /*!< Read Only */ -typedef __I int16_t vsc16; /*!< Read Only */ -typedef __I int8_t vsc8; /*!< Read Only */ - -typedef uint32_t u32; -typedef uint16_t u16; -typedef uint8_t u8; - -typedef const uint32_t uc32; /*!< Read Only */ -typedef const uint16_t uc16; /*!< Read Only */ -typedef const uint8_t uc8; /*!< Read Only */ - -typedef __IO uint32_t vu32; -typedef __IO uint16_t vu16; -typedef __IO uint8_t vu8; - -typedef __I uint32_t vuc32; /*!< Read Only */ -typedef __I uint16_t vuc16; /*!< Read Only */ -typedef __I uint8_t vuc8; /*!< Read Only */ - -typedef enum {RESET = 0, SET = !RESET} FlagStatus, ITStatus; - -typedef enum {DISABLE = 0, ENABLE = !DISABLE} FunctionalState; -#define IS_FUNCTIONAL_STATE(STATE) (((STATE) == DISABLE) || ((STATE) == ENABLE)) - -typedef enum {ERROR = 0, SUCCESS = !ERROR} ErrorStatus; - -/** - * @} - */ - -/** @addtogroup Peripheral_registers_structures - * @{ - */ - -/** - * @brief Analog to Digital Converter - */ - -typedef struct -{ - __IO uint32_t SR; /*!< ADC status register, Address offset: 0x00 */ - __IO uint32_t CR1; /*!< ADC control register 1, Address offset: 0x04 */ - __IO uint32_t CR2; /*!< ADC control register 2, Address offset: 0x08 */ - __IO uint32_t SMPR1; /*!< ADC sample time register 1, Address offset: 0x0C */ - __IO uint32_t SMPR2; /*!< ADC sample time register 2, Address offset: 0x10 */ - __IO uint32_t JOFR1; /*!< ADC injected channel data offset register 1, Address offset: 0x14 */ - __IO uint32_t JOFR2; /*!< ADC injected channel data offset register 2, Address offset: 0x18 */ - __IO uint32_t JOFR3; /*!< ADC injected channel data offset register 3, Address offset: 0x1C */ - __IO uint32_t JOFR4; /*!< ADC injected channel data offset register 4, Address offset: 0x20 */ - __IO uint32_t HTR; /*!< ADC watchdog higher threshold register, Address offset: 0x24 */ - __IO uint32_t LTR; /*!< ADC watchdog lower threshold register, Address offset: 0x28 */ - __IO uint32_t SQR1; /*!< ADC regular sequence register 1, Address offset: 0x2C */ - __IO uint32_t SQR2; /*!< ADC regular sequence register 2, Address offset: 0x30 */ - __IO uint32_t SQR3; /*!< ADC regular sequence register 3, Address offset: 0x34 */ - __IO uint32_t JSQR; /*!< ADC injected sequence register, Address offset: 0x38*/ - __IO uint32_t JDR1; /*!< ADC injected data register 1, Address offset: 0x3C */ - __IO uint32_t JDR2; /*!< ADC injected data register 2, Address offset: 0x40 */ - __IO uint32_t JDR3; /*!< ADC injected data register 3, Address offset: 0x44 */ - __IO uint32_t JDR4; /*!< ADC injected data register 4, Address offset: 0x48 */ - __IO uint32_t DR; /*!< ADC regular data register, Address offset: 0x4C */ -} ADC_TypeDef; - -typedef struct -{ - __IO uint32_t CSR; /*!< ADC Common status register, Address offset: ADC1 base address + 0x300 */ - __IO uint32_t CCR; /*!< ADC common control register, Address offset: ADC1 base address + 0x304 */ - __IO uint32_t CDR; /*!< ADC common regular data register for dual - AND triple modes, Address offset: ADC1 base address + 0x308 */ -} ADC_Common_TypeDef; - - -/** - * @brief Controller Area Network TxMailBox - */ - -typedef struct -{ - __IO uint32_t TIR; /*!< CAN TX mailbox identifier register */ - __IO uint32_t TDTR; /*!< CAN mailbox data length control and time stamp register */ - __IO uint32_t TDLR; /*!< CAN mailbox data low register */ - __IO uint32_t TDHR; /*!< CAN mailbox data high register */ -} CAN_TxMailBox_TypeDef; - -/** - * @brief Controller Area Network FIFOMailBox - */ - -typedef struct -{ - __IO uint32_t RIR; /*!< CAN receive FIFO mailbox identifier register */ - __IO uint32_t RDTR; /*!< CAN receive FIFO mailbox data length control and time stamp register */ - __IO uint32_t RDLR; /*!< CAN receive FIFO mailbox data low register */ - __IO uint32_t RDHR; /*!< CAN receive FIFO mailbox data high register */ -} CAN_FIFOMailBox_TypeDef; - -/** - * @brief Controller Area Network FilterRegister - */ - -typedef struct -{ - __IO uint32_t FR1; /*!< CAN Filter bank register 1 */ - __IO uint32_t FR2; /*!< CAN Filter bank register 1 */ -} CAN_FilterRegister_TypeDef; - -/** - * @brief Controller Area Network - */ - -typedef struct -{ - __IO uint32_t MCR; /*!< CAN master control register, Address offset: 0x00 */ - __IO uint32_t MSR; /*!< CAN master status register, Address offset: 0x04 */ - __IO uint32_t TSR; /*!< CAN transmit status register, Address offset: 0x08 */ - __IO uint32_t RF0R; /*!< CAN receive FIFO 0 register, Address offset: 0x0C */ - __IO uint32_t RF1R; /*!< CAN receive FIFO 1 register, Address offset: 0x10 */ - __IO uint32_t IER; /*!< CAN interrupt enable register, Address offset: 0x14 */ - __IO uint32_t ESR; /*!< CAN error status register, Address offset: 0x18 */ - __IO uint32_t BTR; /*!< CAN bit timing register, Address offset: 0x1C */ - uint32_t RESERVED0[88]; /*!< Reserved, 0x020 - 0x17F */ - CAN_TxMailBox_TypeDef sTxMailBox[3]; /*!< CAN Tx MailBox, Address offset: 0x180 - 0x1AC */ - CAN_FIFOMailBox_TypeDef sFIFOMailBox[2]; /*!< CAN FIFO MailBox, Address offset: 0x1B0 - 0x1CC */ - uint32_t RESERVED1[12]; /*!< Reserved, 0x1D0 - 0x1FF */ - __IO uint32_t FMR; /*!< CAN filter master register, Address offset: 0x200 */ - __IO uint32_t FM1R; /*!< CAN filter mode register, Address offset: 0x204 */ - uint32_t RESERVED2; /*!< Reserved, 0x208 */ - __IO uint32_t FS1R; /*!< CAN filter scale register, Address offset: 0x20C */ - uint32_t RESERVED3; /*!< Reserved, 0x210 */ - __IO uint32_t FFA1R; /*!< CAN filter FIFO assignment register, Address offset: 0x214 */ - uint32_t RESERVED4; /*!< Reserved, 0x218 */ - __IO uint32_t FA1R; /*!< CAN filter activation register, Address offset: 0x21C */ - uint32_t RESERVED5[8]; /*!< Reserved, 0x220-0x23F */ - CAN_FilterRegister_TypeDef sFilterRegister[28]; /*!< CAN Filter Register, Address offset: 0x240-0x31C */ -} CAN_TypeDef; - -/** - * @brief CRC calculation unit - */ - -typedef struct -{ - __IO uint32_t DR; /*!< CRC Data register, Address offset: 0x00 */ - __IO uint8_t IDR; /*!< CRC Independent data register, Address offset: 0x04 */ - uint8_t RESERVED0; /*!< Reserved, 0x05 */ - uint16_t RESERVED1; /*!< Reserved, 0x06 */ - __IO uint32_t CR; /*!< CRC Control register, Address offset: 0x08 */ -} CRC_TypeDef; - -/** - * @brief Digital to Analog Converter - */ - -typedef struct -{ - __IO uint32_t CR; /*!< DAC control register, Address offset: 0x00 */ - __IO uint32_t SWTRIGR; /*!< DAC software trigger register, Address offset: 0x04 */ - __IO uint32_t DHR12R1; /*!< DAC channel1 12-bit right-aligned data holding register, Address offset: 0x08 */ - __IO uint32_t DHR12L1; /*!< DAC channel1 12-bit left aligned data holding register, Address offset: 0x0C */ - __IO uint32_t DHR8R1; /*!< DAC channel1 8-bit right aligned data holding register, Address offset: 0x10 */ - __IO uint32_t DHR12R2; /*!< DAC channel2 12-bit right aligned data holding register, Address offset: 0x14 */ - __IO uint32_t DHR12L2; /*!< DAC channel2 12-bit left aligned data holding register, Address offset: 0x18 */ - __IO uint32_t DHR8R2; /*!< DAC channel2 8-bit right-aligned data holding register, Address offset: 0x1C */ - __IO uint32_t DHR12RD; /*!< Dual DAC 12-bit right-aligned data holding register, Address offset: 0x20 */ - __IO uint32_t DHR12LD; /*!< DUAL DAC 12-bit left aligned data holding register, Address offset: 0x24 */ - __IO uint32_t DHR8RD; /*!< DUAL DAC 8-bit right aligned data holding register, Address offset: 0x28 */ - __IO uint32_t DOR1; /*!< DAC channel1 data output register, Address offset: 0x2C */ - __IO uint32_t DOR2; /*!< DAC channel2 data output register, Address offset: 0x30 */ - __IO uint32_t SR; /*!< DAC status register, Address offset: 0x34 */ -} DAC_TypeDef; - -/** - * @brief Debug MCU - */ - -typedef struct -{ - __IO uint32_t IDCODE; /*!< MCU device ID code, Address offset: 0x00 */ - __IO uint32_t CR; /*!< Debug MCU configuration register, Address offset: 0x04 */ - __IO uint32_t APB1FZ; /*!< Debug MCU APB1 freeze register, Address offset: 0x08 */ - __IO uint32_t APB2FZ; /*!< Debug MCU APB2 freeze register, Address offset: 0x0C */ -}DBGMCU_TypeDef; - -/** - * @brief DCMI - */ - -typedef struct -{ - __IO uint32_t CR; /*!< DCMI control register 1, Address offset: 0x00 */ - __IO uint32_t SR; /*!< DCMI status register, Address offset: 0x04 */ - __IO uint32_t RISR; /*!< DCMI raw interrupt status register, Address offset: 0x08 */ - __IO uint32_t IER; /*!< DCMI interrupt enable register, Address offset: 0x0C */ - __IO uint32_t MISR; /*!< DCMI masked interrupt status register, Address offset: 0x10 */ - __IO uint32_t ICR; /*!< DCMI interrupt clear register, Address offset: 0x14 */ - __IO uint32_t ESCR; /*!< DCMI embedded synchronization code register, Address offset: 0x18 */ - __IO uint32_t ESUR; /*!< DCMI embedded synchronization unmask register, Address offset: 0x1C */ - __IO uint32_t CWSTRTR; /*!< DCMI crop window start, Address offset: 0x20 */ - __IO uint32_t CWSIZER; /*!< DCMI crop window size, Address offset: 0x24 */ - __IO uint32_t DR; /*!< DCMI data register, Address offset: 0x28 */ -} DCMI_TypeDef; - -/** - * @brief DMA Controller - */ - -typedef struct -{ - __IO uint32_t CR; /*!< DMA stream x configuration register */ - __IO uint32_t NDTR; /*!< DMA stream x number of data register */ - __IO uint32_t PAR; /*!< DMA stream x peripheral address register */ - __IO uint32_t M0AR; /*!< DMA stream x memory 0 address register */ - __IO uint32_t M1AR; /*!< DMA stream x memory 1 address register */ - __IO uint32_t FCR; /*!< DMA stream x FIFO control register */ -} DMA_Stream_TypeDef; - -typedef struct -{ - __IO uint32_t LISR; /*!< DMA low interrupt status register, Address offset: 0x00 */ - __IO uint32_t HISR; /*!< DMA high interrupt status register, Address offset: 0x04 */ - __IO uint32_t LIFCR; /*!< DMA low interrupt flag clear register, Address offset: 0x08 */ - __IO uint32_t HIFCR; /*!< DMA high interrupt flag clear register, Address offset: 0x0C */ -} DMA_TypeDef; - -/** - * @brief DMA2D Controller - */ - -typedef struct -{ - __IO uint32_t CR; /*!< DMA2D Control Register, Address offset: 0x00 */ - __IO uint32_t ISR; /*!< DMA2D Interrupt Status Register, Address offset: 0x04 */ - __IO uint32_t IFCR; /*!< DMA2D Interrupt Flag Clear Register, Address offset: 0x08 */ - __IO uint32_t FGMAR; /*!< DMA2D Foreground Memory Address Register, Address offset: 0x0C */ - __IO uint32_t FGOR; /*!< DMA2D Foreground Offset Register, Address offset: 0x10 */ - __IO uint32_t BGMAR; /*!< DMA2D Background Memory Address Register, Address offset: 0x14 */ - __IO uint32_t BGOR; /*!< DMA2D Background Offset Register, Address offset: 0x18 */ - __IO uint32_t FGPFCCR; /*!< DMA2D Foreground PFC Control Register, Address offset: 0x1C */ - __IO uint32_t FGCOLR; /*!< DMA2D Foreground Color Register, Address offset: 0x20 */ - __IO uint32_t BGPFCCR; /*!< DMA2D Background PFC Control Register, Address offset: 0x24 */ - __IO uint32_t BGCOLR; /*!< DMA2D Background Color Register, Address offset: 0x28 */ - __IO uint32_t FGCMAR; /*!< DMA2D Foreground CLUT Memory Address Register, Address offset: 0x2C */ - __IO uint32_t BGCMAR; /*!< DMA2D Background CLUT Memory Address Register, Address offset: 0x30 */ - __IO uint32_t OPFCCR; /*!< DMA2D Output PFC Control Register, Address offset: 0x34 */ - __IO uint32_t OCOLR; /*!< DMA2D Output Color Register, Address offset: 0x38 */ - __IO uint32_t OMAR; /*!< DMA2D Output Memory Address Register, Address offset: 0x3C */ - __IO uint32_t OOR; /*!< DMA2D Output Offset Register, Address offset: 0x40 */ - __IO uint32_t NLR; /*!< DMA2D Number of Line Register, Address offset: 0x44 */ - __IO uint32_t LWR; /*!< DMA2D Line Watermark Register, Address offset: 0x48 */ - __IO uint32_t AMTCR; /*!< DMA2D AHB Master Timer Configuration Register, Address offset: 0x4C */ - uint32_t RESERVED[236]; /*!< Reserved, 0x50-0x3FF */ - __IO uint32_t FGCLUT[256]; /*!< DMA2D Foreground CLUT, Address offset:400-7FF */ - __IO uint32_t BGCLUT[256]; /*!< DMA2D Background CLUT, Address offset:800-BFF */ -} DMA2D_TypeDef; - -/** - * @brief Ethernet MAC - */ - -typedef struct -{ - __IO uint32_t MACCR; - __IO uint32_t MACFFR; - __IO uint32_t MACHTHR; - __IO uint32_t MACHTLR; - __IO uint32_t MACMIIAR; - __IO uint32_t MACMIIDR; - __IO uint32_t MACFCR; - __IO uint32_t MACVLANTR; /* 8 */ - uint32_t RESERVED0[2]; - __IO uint32_t MACRWUFFR; /* 11 */ - __IO uint32_t MACPMTCSR; - uint32_t RESERVED1[2]; - __IO uint32_t MACSR; /* 15 */ - __IO uint32_t MACIMR; - __IO uint32_t MACA0HR; - __IO uint32_t MACA0LR; - __IO uint32_t MACA1HR; - __IO uint32_t MACA1LR; - __IO uint32_t MACA2HR; - __IO uint32_t MACA2LR; - __IO uint32_t MACA3HR; - __IO uint32_t MACA3LR; /* 24 */ - uint32_t RESERVED2[40]; - __IO uint32_t MMCCR; /* 65 */ - __IO uint32_t MMCRIR; - __IO uint32_t MMCTIR; - __IO uint32_t MMCRIMR; - __IO uint32_t MMCTIMR; /* 69 */ - uint32_t RESERVED3[14]; - __IO uint32_t MMCTGFSCCR; /* 84 */ - __IO uint32_t MMCTGFMSCCR; - uint32_t RESERVED4[5]; - __IO uint32_t MMCTGFCR; - uint32_t RESERVED5[10]; - __IO uint32_t MMCRFCECR; - __IO uint32_t MMCRFAECR; - uint32_t RESERVED6[10]; - __IO uint32_t MMCRGUFCR; - uint32_t RESERVED7[334]; - __IO uint32_t PTPTSCR; - __IO uint32_t PTPSSIR; - __IO uint32_t PTPTSHR; - __IO uint32_t PTPTSLR; - __IO uint32_t PTPTSHUR; - __IO uint32_t PTPTSLUR; - __IO uint32_t PTPTSAR; - __IO uint32_t PTPTTHR; - __IO uint32_t PTPTTLR; - __IO uint32_t RESERVED8; - __IO uint32_t PTPTSSR; - uint32_t RESERVED9[565]; - __IO uint32_t DMABMR; - __IO uint32_t DMATPDR; - __IO uint32_t DMARPDR; - __IO uint32_t DMARDLAR; - __IO uint32_t DMATDLAR; - __IO uint32_t DMASR; - __IO uint32_t DMAOMR; - __IO uint32_t DMAIER; - __IO uint32_t DMAMFBOCR; - __IO uint32_t DMARSWTR; - uint32_t RESERVED10[8]; - __IO uint32_t DMACHTDR; - __IO uint32_t DMACHRDR; - __IO uint32_t DMACHTBAR; - __IO uint32_t DMACHRBAR; -} ETH_TypeDef; - -/** - * @brief External Interrupt/Event Controller - */ - -typedef struct -{ - __IO uint32_t IMR; /*!< EXTI Interrupt mask register, Address offset: 0x00 */ - __IO uint32_t EMR; /*!< EXTI Event mask register, Address offset: 0x04 */ - __IO uint32_t RTSR; /*!< EXTI Rising trigger selection register, Address offset: 0x08 */ - __IO uint32_t FTSR; /*!< EXTI Falling trigger selection register, Address offset: 0x0C */ - __IO uint32_t SWIER; /*!< EXTI Software interrupt event register, Address offset: 0x10 */ - __IO uint32_t PR; /*!< EXTI Pending register, Address offset: 0x14 */ -} EXTI_TypeDef; - -/** - * @brief FLASH Registers - */ - -typedef struct -{ - __IO uint32_t ACR; /*!< FLASH access control register, Address offset: 0x00 */ - __IO uint32_t KEYR; /*!< FLASH key register, Address offset: 0x04 */ - __IO uint32_t OPTKEYR; /*!< FLASH option key register, Address offset: 0x08 */ - __IO uint32_t SR; /*!< FLASH status register, Address offset: 0x0C */ - __IO uint32_t CR; /*!< FLASH control register, Address offset: 0x10 */ - __IO uint32_t OPTCR; /*!< FLASH option control register , Address offset: 0x14 */ - __IO uint32_t OPTCR1; /*!< FLASH option control register 1, Address offset: 0x18 */ -} FLASH_TypeDef; - -#if defined (STM32F40_41xxx) -/** - * @brief Flexible Static Memory Controller - */ - -typedef struct -{ - __IO uint32_t BTCR[8]; /*!< NOR/PSRAM chip-select control register(BCR) and chip-select timing register(BTR), Address offset: 0x00-1C */ -} FSMC_Bank1_TypeDef; - -/** - * @brief Flexible Static Memory Controller Bank1E - */ - -typedef struct -{ - __IO uint32_t BWTR[7]; /*!< NOR/PSRAM write timing registers, Address offset: 0x104-0x11C */ -} FSMC_Bank1E_TypeDef; - -/** - * @brief Flexible Static Memory Controller Bank2 - */ - -typedef struct -{ - __IO uint32_t PCR2; /*!< NAND Flash control register 2, Address offset: 0x60 */ - __IO uint32_t SR2; /*!< NAND Flash FIFO status and interrupt register 2, Address offset: 0x64 */ - __IO uint32_t PMEM2; /*!< NAND Flash Common memory space timing register 2, Address offset: 0x68 */ - __IO uint32_t PATT2; /*!< NAND Flash Attribute memory space timing register 2, Address offset: 0x6C */ - uint32_t RESERVED0; /*!< Reserved, 0x70 */ - __IO uint32_t ECCR2; /*!< NAND Flash ECC result registers 2, Address offset: 0x74 */ -} FSMC_Bank2_TypeDef; - -/** - * @brief Flexible Static Memory Controller Bank3 - */ - -typedef struct -{ - __IO uint32_t PCR3; /*!< NAND Flash control register 3, Address offset: 0x80 */ - __IO uint32_t SR3; /*!< NAND Flash FIFO status and interrupt register 3, Address offset: 0x84 */ - __IO uint32_t PMEM3; /*!< NAND Flash Common memory space timing register 3, Address offset: 0x88 */ - __IO uint32_t PATT3; /*!< NAND Flash Attribute memory space timing register 3, Address offset: 0x8C */ - uint32_t RESERVED0; /*!< Reserved, 0x90 */ - __IO uint32_t ECCR3; /*!< NAND Flash ECC result registers 3, Address offset: 0x94 */ -} FSMC_Bank3_TypeDef; - -/** - * @brief Flexible Static Memory Controller Bank4 - */ - -typedef struct -{ - __IO uint32_t PCR4; /*!< PC Card control register 4, Address offset: 0xA0 */ - __IO uint32_t SR4; /*!< PC Card FIFO status and interrupt register 4, Address offset: 0xA4 */ - __IO uint32_t PMEM4; /*!< PC Card Common memory space timing register 4, Address offset: 0xA8 */ - __IO uint32_t PATT4; /*!< PC Card Attribute memory space timing register 4, Address offset: 0xAC */ - __IO uint32_t PIO4; /*!< PC Card I/O space timing register 4, Address offset: 0xB0 */ -} FSMC_Bank4_TypeDef; -#endif /* STM32F40_41xxx */ - -#if defined (STM32F427_437xx) || defined (STM32F429_439xx) -/** - * @brief Flexible Memory Controller - */ - -typedef struct -{ - __IO uint32_t BTCR[8]; /*!< NOR/PSRAM chip-select control register(BCR) and chip-select timing register(BTR), Address offset: 0x00-1C */ -} FMC_Bank1_TypeDef; - -/** - * @brief Flexible Memory Controller Bank1E - */ - -typedef struct -{ - __IO uint32_t BWTR[7]; /*!< NOR/PSRAM write timing registers, Address offset: 0x104-0x11C */ -} FMC_Bank1E_TypeDef; - -/** - * @brief Flexible Memory Controller Bank2 - */ - -typedef struct -{ - __IO uint32_t PCR2; /*!< NAND Flash control register 2, Address offset: 0x60 */ - __IO uint32_t SR2; /*!< NAND Flash FIFO status and interrupt register 2, Address offset: 0x64 */ - __IO uint32_t PMEM2; /*!< NAND Flash Common memory space timing register 2, Address offset: 0x68 */ - __IO uint32_t PATT2; /*!< NAND Flash Attribute memory space timing register 2, Address offset: 0x6C */ - uint32_t RESERVED0; /*!< Reserved, 0x70 */ - __IO uint32_t ECCR2; /*!< NAND Flash ECC result registers 2, Address offset: 0x74 */ -} FMC_Bank2_TypeDef; - -/** - * @brief Flexible Memory Controller Bank3 - */ - -typedef struct -{ - __IO uint32_t PCR3; /*!< NAND Flash control register 3, Address offset: 0x80 */ - __IO uint32_t SR3; /*!< NAND Flash FIFO status and interrupt register 3, Address offset: 0x84 */ - __IO uint32_t PMEM3; /*!< NAND Flash Common memory space timing register 3, Address offset: 0x88 */ - __IO uint32_t PATT3; /*!< NAND Flash Attribute memory space timing register 3, Address offset: 0x8C */ - uint32_t RESERVED0; /*!< Reserved, 0x90 */ - __IO uint32_t ECCR3; /*!< NAND Flash ECC result registers 3, Address offset: 0x94 */ -} FMC_Bank3_TypeDef; - -/** - * @brief Flexible Memory Controller Bank4 - */ - -typedef struct -{ - __IO uint32_t PCR4; /*!< PC Card control register 4, Address offset: 0xA0 */ - __IO uint32_t SR4; /*!< PC Card FIFO status and interrupt register 4, Address offset: 0xA4 */ - __IO uint32_t PMEM4; /*!< PC Card Common memory space timing register 4, Address offset: 0xA8 */ - __IO uint32_t PATT4; /*!< PC Card Attribute memory space timing register 4, Address offset: 0xAC */ - __IO uint32_t PIO4; /*!< PC Card I/O space timing register 4, Address offset: 0xB0 */ -} FMC_Bank4_TypeDef; - -/** - * @brief Flexible Memory Controller Bank5_6 - */ - -typedef struct -{ - __IO uint32_t SDCR[2]; /*!< SDRAM Control registers , Address offset: 0x140-0x144 */ - __IO uint32_t SDTR[2]; /*!< SDRAM Timing registers , Address offset: 0x148-0x14C */ - __IO uint32_t SDCMR; /*!< SDRAM Command Mode register, Address offset: 0x150 */ - __IO uint32_t SDRTR; /*!< SDRAM Refresh Timer register, Address offset: 0x154 */ - __IO uint32_t SDSR; /*!< SDRAM Status register, Address offset: 0x158 */ -} FMC_Bank5_6_TypeDef; -#endif /* STM32F427_437xx || STM32F429_439xx */ - -/** - * @brief General Purpose I/O - */ - -typedef struct -{ - __IO uint32_t MODER; /*!< GPIO port mode register, Address offset: 0x00 */ - __IO uint32_t OTYPER; /*!< GPIO port output type register, Address offset: 0x04 */ - __IO uint32_t OSPEEDR; /*!< GPIO port output speed register, Address offset: 0x08 */ - __IO uint32_t PUPDR; /*!< GPIO port pull-up/pull-down register, Address offset: 0x0C */ - __IO uint32_t IDR; /*!< GPIO port input data register, Address offset: 0x10 */ - __IO uint32_t ODR; /*!< GPIO port output data register, Address offset: 0x14 */ - __IO uint16_t BSRRL; /*!< GPIO port bit set/reset low register, Address offset: 0x18 */ - __IO uint16_t BSRRH; /*!< GPIO port bit set/reset high register, Address offset: 0x1A */ - __IO uint32_t LCKR; /*!< GPIO port configuration lock register, Address offset: 0x1C */ - __IO uint32_t AFR[2]; /*!< GPIO alternate function registers, Address offset: 0x20-0x24 */ -} GPIO_TypeDef; - -/** - * @brief System configuration controller - */ - -typedef struct -{ - __IO uint32_t MEMRMP; /*!< SYSCFG memory remap register, Address offset: 0x00 */ - __IO uint32_t PMC; /*!< SYSCFG peripheral mode configuration register, Address offset: 0x04 */ - __IO uint32_t EXTICR[4]; /*!< SYSCFG external interrupt configuration registers, Address offset: 0x08-0x14 */ - uint32_t RESERVED[2]; /*!< Reserved, 0x18-0x1C */ - __IO uint32_t CMPCR; /*!< SYSCFG Compensation cell control register, Address offset: 0x20 */ -} SYSCFG_TypeDef; - -/** - * @brief Inter-integrated Circuit Interface - */ - -typedef struct -{ - __IO uint16_t CR1; /*!< I2C Control register 1, Address offset: 0x00 */ - uint16_t RESERVED0; /*!< Reserved, 0x02 */ - __IO uint16_t CR2; /*!< I2C Control register 2, Address offset: 0x04 */ - uint16_t RESERVED1; /*!< Reserved, 0x06 */ - __IO uint16_t OAR1; /*!< I2C Own address register 1, Address offset: 0x08 */ - uint16_t RESERVED2; /*!< Reserved, 0x0A */ - __IO uint16_t OAR2; /*!< I2C Own address register 2, Address offset: 0x0C */ - uint16_t RESERVED3; /*!< Reserved, 0x0E */ - __IO uint16_t DR; /*!< I2C Data register, Address offset: 0x10 */ - uint16_t RESERVED4; /*!< Reserved, 0x12 */ - __IO uint16_t SR1; /*!< I2C Status register 1, Address offset: 0x14 */ - uint16_t RESERVED5; /*!< Reserved, 0x16 */ - __IO uint16_t SR2; /*!< I2C Status register 2, Address offset: 0x18 */ - uint16_t RESERVED6; /*!< Reserved, 0x1A */ - __IO uint16_t CCR; /*!< I2C Clock control register, Address offset: 0x1C */ - uint16_t RESERVED7; /*!< Reserved, 0x1E */ - __IO uint16_t TRISE; /*!< I2C TRISE register, Address offset: 0x20 */ - uint16_t RESERVED8; /*!< Reserved, 0x22 */ - __IO uint16_t FLTR; /*!< I2C FLTR register, Address offset: 0x24 */ - uint16_t RESERVED9; /*!< Reserved, 0x26 */ -} I2C_TypeDef; - -/** - * @brief Independent WATCHDOG - */ - -typedef struct -{ - __IO uint32_t KR; /*!< IWDG Key register, Address offset: 0x00 */ - __IO uint32_t PR; /*!< IWDG Prescaler register, Address offset: 0x04 */ - __IO uint32_t RLR; /*!< IWDG Reload register, Address offset: 0x08 */ - __IO uint32_t SR; /*!< IWDG Status register, Address offset: 0x0C */ -} IWDG_TypeDef; - -/** - * @brief LCD-TFT Display Controller - */ - -typedef struct -{ - uint32_t RESERVED0[2]; /*!< Reserved, 0x00-0x04 */ - __IO uint32_t SSCR; /*!< LTDC Synchronization Size Configuration Register, Address offset: 0x08 */ - __IO uint32_t BPCR; /*!< LTDC Back Porch Configuration Register, Address offset: 0x0C */ - __IO uint32_t AWCR; /*!< LTDC Active Width Configuration Register, Address offset: 0x10 */ - __IO uint32_t TWCR; /*!< LTDC Total Width Configuration Register, Address offset: 0x14 */ - __IO uint32_t GCR; /*!< LTDC Global Control Register, Address offset: 0x18 */ - uint32_t RESERVED1[2]; /*!< Reserved, 0x1C-0x20 */ - __IO uint32_t SRCR; /*!< LTDC Shadow Reload Configuration Register, Address offset: 0x24 */ - uint32_t RESERVED2[1]; /*!< Reserved, 0x28 */ - __IO uint32_t BCCR; /*!< LTDC Background Color Configuration Register, Address offset: 0x2C */ - uint32_t RESERVED3[1]; /*!< Reserved, 0x30 */ - __IO uint32_t IER; /*!< LTDC Interrupt Enable Register, Address offset: 0x34 */ - __IO uint32_t ISR; /*!< LTDC Interrupt Status Register, Address offset: 0x38 */ - __IO uint32_t ICR; /*!< LTDC Interrupt Clear Register, Address offset: 0x3C */ - __IO uint32_t LIPCR; /*!< LTDC Line Interrupt Position Configuration Register, Address offset: 0x40 */ - __IO uint32_t CPSR; /*!< LTDC Current Position Status Register, Address offset: 0x44 */ - __IO uint32_t CDSR; /*!< LTDC Current Display Status Register, Address offset: 0x48 */ -} LTDC_TypeDef; - -/** - * @brief LCD-TFT Display layer x Controller - */ - -typedef struct -{ - __IO uint32_t CR; /*!< LTDC Layerx Control Register Address offset: 0x84 */ - __IO uint32_t WHPCR; /*!< LTDC Layerx Window Horizontal Position Configuration Register Address offset: 0x88 */ - __IO uint32_t WVPCR; /*!< LTDC Layerx Window Vertical Position Configuration Register Address offset: 0x8C */ - __IO uint32_t CKCR; /*!< LTDC Layerx Color Keying Configuration Register Address offset: 0x90 */ - __IO uint32_t PFCR; /*!< LTDC Layerx Pixel Format Configuration Register Address offset: 0x94 */ - __IO uint32_t CACR; /*!< LTDC Layerx Constant Alpha Configuration Register Address offset: 0x98 */ - __IO uint32_t DCCR; /*!< LTDC Layerx Default Color Configuration Register Address offset: 0x9C */ - __IO uint32_t BFCR; /*!< LTDC Layerx Blending Factors Configuration Register Address offset: 0xA0 */ - uint32_t RESERVED0[2]; /*!< Reserved */ - __IO uint32_t CFBAR; /*!< LTDC Layerx Color Frame Buffer Address Register Address offset: 0xAC */ - __IO uint32_t CFBLR; /*!< LTDC Layerx Color Frame Buffer Length Register Address offset: 0xB0 */ - __IO uint32_t CFBLNR; /*!< LTDC Layerx ColorFrame Buffer Line Number Register Address offset: 0xB4 */ - uint32_t RESERVED1[3]; /*!< Reserved */ - __IO uint32_t CLUTWR; /*!< LTDC Layerx CLUT Write Register Address offset: 0x144 */ - -} LTDC_Layer_TypeDef; - -/** - * @brief Power Control - */ - -typedef struct -{ - __IO uint32_t CR; /*!< PWR power control register, Address offset: 0x00 */ - __IO uint32_t CSR; /*!< PWR power control/status register, Address offset: 0x04 */ -} PWR_TypeDef; - -/** - * @brief Reset and Clock Control - */ - -typedef struct -{ - __IO uint32_t CR; /*!< RCC clock control register, Address offset: 0x00 */ - __IO uint32_t PLLCFGR; /*!< RCC PLL configuration register, Address offset: 0x04 */ - __IO uint32_t CFGR; /*!< RCC clock configuration register, Address offset: 0x08 */ - __IO uint32_t CIR; /*!< RCC clock interrupt register, Address offset: 0x0C */ - __IO uint32_t AHB1RSTR; /*!< RCC AHB1 peripheral reset register, Address offset: 0x10 */ - __IO uint32_t AHB2RSTR; /*!< RCC AHB2 peripheral reset register, Address offset: 0x14 */ - __IO uint32_t AHB3RSTR; /*!< RCC AHB3 peripheral reset register, Address offset: 0x18 */ - uint32_t RESERVED0; /*!< Reserved, 0x1C */ - __IO uint32_t APB1RSTR; /*!< RCC APB1 peripheral reset register, Address offset: 0x20 */ - __IO uint32_t APB2RSTR; /*!< RCC APB2 peripheral reset register, Address offset: 0x24 */ - uint32_t RESERVED1[2]; /*!< Reserved, 0x28-0x2C */ - __IO uint32_t AHB1ENR; /*!< RCC AHB1 peripheral clock register, Address offset: 0x30 */ - __IO uint32_t AHB2ENR; /*!< RCC AHB2 peripheral clock register, Address offset: 0x34 */ - __IO uint32_t AHB3ENR; /*!< RCC AHB3 peripheral clock register, Address offset: 0x38 */ - uint32_t RESERVED2; /*!< Reserved, 0x3C */ - __IO uint32_t APB1ENR; /*!< RCC APB1 peripheral clock enable register, Address offset: 0x40 */ - __IO uint32_t APB2ENR; /*!< RCC APB2 peripheral clock enable register, Address offset: 0x44 */ - uint32_t RESERVED3[2]; /*!< Reserved, 0x48-0x4C */ - __IO uint32_t AHB1LPENR; /*!< RCC AHB1 peripheral clock enable in low power mode register, Address offset: 0x50 */ - __IO uint32_t AHB2LPENR; /*!< RCC AHB2 peripheral clock enable in low power mode register, Address offset: 0x54 */ - __IO uint32_t AHB3LPENR; /*!< RCC AHB3 peripheral clock enable in low power mode register, Address offset: 0x58 */ - uint32_t RESERVED4; /*!< Reserved, 0x5C */ - __IO uint32_t APB1LPENR; /*!< RCC APB1 peripheral clock enable in low power mode register, Address offset: 0x60 */ - __IO uint32_t APB2LPENR; /*!< RCC APB2 peripheral clock enable in low power mode register, Address offset: 0x64 */ - uint32_t RESERVED5[2]; /*!< Reserved, 0x68-0x6C */ - __IO uint32_t BDCR; /*!< RCC Backup domain control register, Address offset: 0x70 */ - __IO uint32_t CSR; /*!< RCC clock control & status register, Address offset: 0x74 */ - uint32_t RESERVED6[2]; /*!< Reserved, 0x78-0x7C */ - __IO uint32_t SSCGR; /*!< RCC spread spectrum clock generation register, Address offset: 0x80 */ - __IO uint32_t PLLI2SCFGR; /*!< RCC PLLI2S configuration register, Address offset: 0x84 */ - __IO uint32_t PLLSAICFGR; /*!< RCC PLLSAI configuration register, Address offset: 0x88 */ - __IO uint32_t DCKCFGR; /*!< RCC Dedicated Clocks configuration register, Address offset: 0x8C */ - -} RCC_TypeDef; - -/** - * @brief Real-Time Clock - */ - -typedef struct -{ - __IO uint32_t TR; /*!< RTC time register, Address offset: 0x00 */ - __IO uint32_t DR; /*!< RTC date register, Address offset: 0x04 */ - __IO uint32_t CR; /*!< RTC control register, Address offset: 0x08 */ - __IO uint32_t ISR; /*!< RTC initialization and status register, Address offset: 0x0C */ - __IO uint32_t PRER; /*!< RTC prescaler register, Address offset: 0x10 */ - __IO uint32_t WUTR; /*!< RTC wakeup timer register, Address offset: 0x14 */ - __IO uint32_t CALIBR; /*!< RTC calibration register, Address offset: 0x18 */ - __IO uint32_t ALRMAR; /*!< RTC alarm A register, Address offset: 0x1C */ - __IO uint32_t ALRMBR; /*!< RTC alarm B register, Address offset: 0x20 */ - __IO uint32_t WPR; /*!< RTC write protection register, Address offset: 0x24 */ - __IO uint32_t SSR; /*!< RTC sub second register, Address offset: 0x28 */ - __IO uint32_t SHIFTR; /*!< RTC shift control register, Address offset: 0x2C */ - __IO uint32_t TSTR; /*!< RTC time stamp time register, Address offset: 0x30 */ - __IO uint32_t TSDR; /*!< RTC time stamp date register, Address offset: 0x34 */ - __IO uint32_t TSSSR; /*!< RTC time-stamp sub second register, Address offset: 0x38 */ - __IO uint32_t CALR; /*!< RTC calibration register, Address offset: 0x3C */ - __IO uint32_t TAFCR; /*!< RTC tamper and alternate function configuration register, Address offset: 0x40 */ - __IO uint32_t ALRMASSR;/*!< RTC alarm A sub second register, Address offset: 0x44 */ - __IO uint32_t ALRMBSSR;/*!< RTC alarm B sub second register, Address offset: 0x48 */ - uint32_t RESERVED7; /*!< Reserved, 0x4C */ - __IO uint32_t BKP0R; /*!< RTC backup register 1, Address offset: 0x50 */ - __IO uint32_t BKP1R; /*!< RTC backup register 1, Address offset: 0x54 */ - __IO uint32_t BKP2R; /*!< RTC backup register 2, Address offset: 0x58 */ - __IO uint32_t BKP3R; /*!< RTC backup register 3, Address offset: 0x5C */ - __IO uint32_t BKP4R; /*!< RTC backup register 4, Address offset: 0x60 */ - __IO uint32_t BKP5R; /*!< RTC backup register 5, Address offset: 0x64 */ - __IO uint32_t BKP6R; /*!< RTC backup register 6, Address offset: 0x68 */ - __IO uint32_t BKP7R; /*!< RTC backup register 7, Address offset: 0x6C */ - __IO uint32_t BKP8R; /*!< RTC backup register 8, Address offset: 0x70 */ - __IO uint32_t BKP9R; /*!< RTC backup register 9, Address offset: 0x74 */ - __IO uint32_t BKP10R; /*!< RTC backup register 10, Address offset: 0x78 */ - __IO uint32_t BKP11R; /*!< RTC backup register 11, Address offset: 0x7C */ - __IO uint32_t BKP12R; /*!< RTC backup register 12, Address offset: 0x80 */ - __IO uint32_t BKP13R; /*!< RTC backup register 13, Address offset: 0x84 */ - __IO uint32_t BKP14R; /*!< RTC backup register 14, Address offset: 0x88 */ - __IO uint32_t BKP15R; /*!< RTC backup register 15, Address offset: 0x8C */ - __IO uint32_t BKP16R; /*!< RTC backup register 16, Address offset: 0x90 */ - __IO uint32_t BKP17R; /*!< RTC backup register 17, Address offset: 0x94 */ - __IO uint32_t BKP18R; /*!< RTC backup register 18, Address offset: 0x98 */ - __IO uint32_t BKP19R; /*!< RTC backup register 19, Address offset: 0x9C */ -} RTC_TypeDef; - - -/** - * @brief Serial Audio Interface - */ - -typedef struct -{ - __IO uint32_t GCR; /*!< SAI global configuration register, Address offset: 0x00 */ -} SAI_TypeDef; - -typedef struct -{ - __IO uint32_t CR1; /*!< SAI block x configuration register 1, Address offset: 0x04 */ - __IO uint32_t CR2; /*!< SAI block x configuration register 2, Address offset: 0x08 */ - __IO uint32_t FRCR; /*!< SAI block x frame configuration register, Address offset: 0x0C */ - __IO uint32_t SLOTR; /*!< SAI block x slot register, Address offset: 0x10 */ - __IO uint32_t IMR; /*!< SAI block x interrupt mask register, Address offset: 0x14 */ - __IO uint32_t SR; /*!< SAI block x status register, Address offset: 0x18 */ - __IO uint32_t CLRFR; /*!< SAI block x clear flag register, Address offset: 0x1C */ - __IO uint32_t DR; /*!< SAI block x data register, Address offset: 0x20 */ -} SAI_Block_TypeDef; - -/** - * @brief SD host Interface - */ - -typedef struct -{ - __IO uint32_t POWER; /*!< SDIO power control register, Address offset: 0x00 */ - __IO uint32_t CLKCR; /*!< SDI clock control register, Address offset: 0x04 */ - __IO uint32_t ARG; /*!< SDIO argument register, Address offset: 0x08 */ - __IO uint32_t CMD; /*!< SDIO command register, Address offset: 0x0C */ - __I uint32_t RESPCMD; /*!< SDIO command response register, Address offset: 0x10 */ - __I uint32_t RESP1; /*!< SDIO response 1 register, Address offset: 0x14 */ - __I uint32_t RESP2; /*!< SDIO response 2 register, Address offset: 0x18 */ - __I uint32_t RESP3; /*!< SDIO response 3 register, Address offset: 0x1C */ - __I uint32_t RESP4; /*!< SDIO response 4 register, Address offset: 0x20 */ - __IO uint32_t DTIMER; /*!< SDIO data timer register, Address offset: 0x24 */ - __IO uint32_t DLEN; /*!< SDIO data length register, Address offset: 0x28 */ - __IO uint32_t DCTRL; /*!< SDIO data control register, Address offset: 0x2C */ - __I uint32_t DCOUNT; /*!< SDIO data counter register, Address offset: 0x30 */ - __I uint32_t STA; /*!< SDIO status register, Address offset: 0x34 */ - __IO uint32_t ICR; /*!< SDIO interrupt clear register, Address offset: 0x38 */ - __IO uint32_t MASK; /*!< SDIO mask register, Address offset: 0x3C */ - uint32_t RESERVED0[2]; /*!< Reserved, 0x40-0x44 */ - __I uint32_t FIFOCNT; /*!< SDIO FIFO counter register, Address offset: 0x48 */ - uint32_t RESERVED1[13]; /*!< Reserved, 0x4C-0x7C */ - __IO uint32_t FIFO; /*!< SDIO data FIFO register, Address offset: 0x80 */ -} SDIO_TypeDef; - -/** - * @brief Serial Peripheral Interface - */ - -typedef struct -{ - __IO uint16_t CR1; /*!< SPI control register 1 (not used in I2S mode), Address offset: 0x00 */ - uint16_t RESERVED0; /*!< Reserved, 0x02 */ - __IO uint16_t CR2; /*!< SPI control register 2, Address offset: 0x04 */ - uint16_t RESERVED1; /*!< Reserved, 0x06 */ - __IO uint16_t SR; /*!< SPI status register, Address offset: 0x08 */ - uint16_t RESERVED2; /*!< Reserved, 0x0A */ - __IO uint16_t DR; /*!< SPI data register, Address offset: 0x0C */ - uint16_t RESERVED3; /*!< Reserved, 0x0E */ - __IO uint16_t CRCPR; /*!< SPI CRC polynomial register (not used in I2S mode), Address offset: 0x10 */ - uint16_t RESERVED4; /*!< Reserved, 0x12 */ - __IO uint16_t RXCRCR; /*!< SPI RX CRC register (not used in I2S mode), Address offset: 0x14 */ - uint16_t RESERVED5; /*!< Reserved, 0x16 */ - __IO uint16_t TXCRCR; /*!< SPI TX CRC register (not used in I2S mode), Address offset: 0x18 */ - uint16_t RESERVED6; /*!< Reserved, 0x1A */ - __IO uint16_t I2SCFGR; /*!< SPI_I2S configuration register, Address offset: 0x1C */ - uint16_t RESERVED7; /*!< Reserved, 0x1E */ - __IO uint16_t I2SPR; /*!< SPI_I2S prescaler register, Address offset: 0x20 */ - uint16_t RESERVED8; /*!< Reserved, 0x22 */ -} SPI_TypeDef; - -/** - * @brief TIM - */ - -typedef struct -{ - __IO uint16_t CR1; /*!< TIM control register 1, Address offset: 0x00 */ - uint16_t RESERVED0; /*!< Reserved, 0x02 */ - __IO uint16_t CR2; /*!< TIM control register 2, Address offset: 0x04 */ - uint16_t RESERVED1; /*!< Reserved, 0x06 */ - __IO uint16_t SMCR; /*!< TIM slave mode control register, Address offset: 0x08 */ - uint16_t RESERVED2; /*!< Reserved, 0x0A */ - __IO uint16_t DIER; /*!< TIM DMA/interrupt enable register, Address offset: 0x0C */ - uint16_t RESERVED3; /*!< Reserved, 0x0E */ - __IO uint16_t SR; /*!< TIM status register, Address offset: 0x10 */ - uint16_t RESERVED4; /*!< Reserved, 0x12 */ - __IO uint16_t EGR; /*!< TIM event generation register, Address offset: 0x14 */ - uint16_t RESERVED5; /*!< Reserved, 0x16 */ - __IO uint16_t CCMR1; /*!< TIM capture/compare mode register 1, Address offset: 0x18 */ - uint16_t RESERVED6; /*!< Reserved, 0x1A */ - __IO uint16_t CCMR2; /*!< TIM capture/compare mode register 2, Address offset: 0x1C */ - uint16_t RESERVED7; /*!< Reserved, 0x1E */ - __IO uint16_t CCER; /*!< TIM capture/compare enable register, Address offset: 0x20 */ - uint16_t RESERVED8; /*!< Reserved, 0x22 */ - __IO uint32_t CNT; /*!< TIM counter register, Address offset: 0x24 */ - __IO uint16_t PSC; /*!< TIM prescaler, Address offset: 0x28 */ - uint16_t RESERVED9; /*!< Reserved, 0x2A */ - __IO uint32_t ARR; /*!< TIM auto-reload register, Address offset: 0x2C */ - __IO uint16_t RCR; /*!< TIM repetition counter register, Address offset: 0x30 */ - uint16_t RESERVED10; /*!< Reserved, 0x32 */ - __IO uint32_t CCR1; /*!< TIM capture/compare register 1, Address offset: 0x34 */ - __IO uint32_t CCR2; /*!< TIM capture/compare register 2, Address offset: 0x38 */ - __IO uint32_t CCR3; /*!< TIM capture/compare register 3, Address offset: 0x3C */ - __IO uint32_t CCR4; /*!< TIM capture/compare register 4, Address offset: 0x40 */ - __IO uint16_t BDTR; /*!< TIM break and dead-time register, Address offset: 0x44 */ - uint16_t RESERVED11; /*!< Reserved, 0x46 */ - __IO uint16_t DCR; /*!< TIM DMA control register, Address offset: 0x48 */ - uint16_t RESERVED12; /*!< Reserved, 0x4A */ - __IO uint16_t DMAR; /*!< TIM DMA address for full transfer, Address offset: 0x4C */ - uint16_t RESERVED13; /*!< Reserved, 0x4E */ - __IO uint16_t OR; /*!< TIM option register, Address offset: 0x50 */ - uint16_t RESERVED14; /*!< Reserved, 0x52 */ -} TIM_TypeDef; - -/** - * @brief Universal Synchronous Asynchronous Receiver Transmitter - */ - -typedef struct -{ - __IO uint16_t SR; /*!< USART Status register, Address offset: 0x00 */ - uint16_t RESERVED0; /*!< Reserved, 0x02 */ - __IO uint16_t DR; /*!< USART Data register, Address offset: 0x04 */ - uint16_t RESERVED1; /*!< Reserved, 0x06 */ - __IO uint16_t BRR; /*!< USART Baud rate register, Address offset: 0x08 */ - uint16_t RESERVED2; /*!< Reserved, 0x0A */ - __IO uint16_t CR1; /*!< USART Control register 1, Address offset: 0x0C */ - uint16_t RESERVED3; /*!< Reserved, 0x0E */ - __IO uint16_t CR2; /*!< USART Control register 2, Address offset: 0x10 */ - uint16_t RESERVED4; /*!< Reserved, 0x12 */ - __IO uint16_t CR3; /*!< USART Control register 3, Address offset: 0x14 */ - uint16_t RESERVED5; /*!< Reserved, 0x16 */ - __IO uint16_t GTPR; /*!< USART Guard time and prescaler register, Address offset: 0x18 */ - uint16_t RESERVED6; /*!< Reserved, 0x1A */ -} USART_TypeDef; - -/** - * @brief Window WATCHDOG - */ - -typedef struct -{ - __IO uint32_t CR; /*!< WWDG Control register, Address offset: 0x00 */ - __IO uint32_t CFR; /*!< WWDG Configuration register, Address offset: 0x04 */ - __IO uint32_t SR; /*!< WWDG Status register, Address offset: 0x08 */ -} WWDG_TypeDef; - -/** - * @brief Crypto Processor - */ - -typedef struct -{ - __IO uint32_t CR; /*!< CRYP control register, Address offset: 0x00 */ - __IO uint32_t SR; /*!< CRYP status register, Address offset: 0x04 */ - __IO uint32_t DR; /*!< CRYP data input register, Address offset: 0x08 */ - __IO uint32_t DOUT; /*!< CRYP data output register, Address offset: 0x0C */ - __IO uint32_t DMACR; /*!< CRYP DMA control register, Address offset: 0x10 */ - __IO uint32_t IMSCR; /*!< CRYP interrupt mask set/clear register, Address offset: 0x14 */ - __IO uint32_t RISR; /*!< CRYP raw interrupt status register, Address offset: 0x18 */ - __IO uint32_t MISR; /*!< CRYP masked interrupt status register, Address offset: 0x1C */ - __IO uint32_t K0LR; /*!< CRYP key left register 0, Address offset: 0x20 */ - __IO uint32_t K0RR; /*!< CRYP key right register 0, Address offset: 0x24 */ - __IO uint32_t K1LR; /*!< CRYP key left register 1, Address offset: 0x28 */ - __IO uint32_t K1RR; /*!< CRYP key right register 1, Address offset: 0x2C */ - __IO uint32_t K2LR; /*!< CRYP key left register 2, Address offset: 0x30 */ - __IO uint32_t K2RR; /*!< CRYP key right register 2, Address offset: 0x34 */ - __IO uint32_t K3LR; /*!< CRYP key left register 3, Address offset: 0x38 */ - __IO uint32_t K3RR; /*!< CRYP key right register 3, Address offset: 0x3C */ - __IO uint32_t IV0LR; /*!< CRYP initialization vector left-word register 0, Address offset: 0x40 */ - __IO uint32_t IV0RR; /*!< CRYP initialization vector right-word register 0, Address offset: 0x44 */ - __IO uint32_t IV1LR; /*!< CRYP initialization vector left-word register 1, Address offset: 0x48 */ - __IO uint32_t IV1RR; /*!< CRYP initialization vector right-word register 1, Address offset: 0x4C */ - __IO uint32_t CSGCMCCM0R; /*!< CRYP GCM/GMAC or CCM/CMAC context swap register 0, Address offset: 0x50 */ - __IO uint32_t CSGCMCCM1R; /*!< CRYP GCM/GMAC or CCM/CMAC context swap register 1, Address offset: 0x54 */ - __IO uint32_t CSGCMCCM2R; /*!< CRYP GCM/GMAC or CCM/CMAC context swap register 2, Address offset: 0x58 */ - __IO uint32_t CSGCMCCM3R; /*!< CRYP GCM/GMAC or CCM/CMAC context swap register 3, Address offset: 0x5C */ - __IO uint32_t CSGCMCCM4R; /*!< CRYP GCM/GMAC or CCM/CMAC context swap register 4, Address offset: 0x60 */ - __IO uint32_t CSGCMCCM5R; /*!< CRYP GCM/GMAC or CCM/CMAC context swap register 5, Address offset: 0x64 */ - __IO uint32_t CSGCMCCM6R; /*!< CRYP GCM/GMAC or CCM/CMAC context swap register 6, Address offset: 0x68 */ - __IO uint32_t CSGCMCCM7R; /*!< CRYP GCM/GMAC or CCM/CMAC context swap register 7, Address offset: 0x6C */ - __IO uint32_t CSGCM0R; /*!< CRYP GCM/GMAC context swap register 0, Address offset: 0x70 */ - __IO uint32_t CSGCM1R; /*!< CRYP GCM/GMAC context swap register 1, Address offset: 0x74 */ - __IO uint32_t CSGCM2R; /*!< CRYP GCM/GMAC context swap register 2, Address offset: 0x78 */ - __IO uint32_t CSGCM3R; /*!< CRYP GCM/GMAC context swap register 3, Address offset: 0x7C */ - __IO uint32_t CSGCM4R; /*!< CRYP GCM/GMAC context swap register 4, Address offset: 0x80 */ - __IO uint32_t CSGCM5R; /*!< CRYP GCM/GMAC context swap register 5, Address offset: 0x84 */ - __IO uint32_t CSGCM6R; /*!< CRYP GCM/GMAC context swap register 6, Address offset: 0x88 */ - __IO uint32_t CSGCM7R; /*!< CRYP GCM/GMAC context swap register 7, Address offset: 0x8C */ -} CRYP_TypeDef; - -/** - * @brief HASH - */ - -typedef struct -{ - __IO uint32_t CR; /*!< HASH control register, Address offset: 0x00 */ - __IO uint32_t DIN; /*!< HASH data input register, Address offset: 0x04 */ - __IO uint32_t STR; /*!< HASH start register, Address offset: 0x08 */ - __IO uint32_t HR[5]; /*!< HASH digest registers, Address offset: 0x0C-0x1C */ - __IO uint32_t IMR; /*!< HASH interrupt enable register, Address offset: 0x20 */ - __IO uint32_t SR; /*!< HASH status register, Address offset: 0x24 */ - uint32_t RESERVED[52]; /*!< Reserved, 0x28-0xF4 */ - __IO uint32_t CSR[54]; /*!< HASH context swap registers, Address offset: 0x0F8-0x1CC */ -} HASH_TypeDef; - -/** - * @brief HASH_DIGEST - */ - -typedef struct -{ - __IO uint32_t HR[8]; /*!< HASH digest registers, Address offset: 0x310-0x32C */ -} HASH_DIGEST_TypeDef; - -/** - * @brief RNG - */ - -typedef struct -{ - __IO uint32_t CR; /*!< RNG control register, Address offset: 0x00 */ - __IO uint32_t SR; /*!< RNG status register, Address offset: 0x04 */ - __IO uint32_t DR; /*!< RNG data register, Address offset: 0x08 */ -} RNG_TypeDef; - -/** - * @} - */ - -/** @addtogroup Peripheral_memory_map - * @{ - */ -#define FLASH_BASE ((uint32_t)0x08000000) /*!< FLASH(up to 1 MB) base address in the alias region */ -#define CCMDATARAM_BASE ((uint32_t)0x10000000) /*!< CCM(core coupled memory) data RAM(64 KB) base address in the alias region */ -#define SRAM1_BASE ((uint32_t)0x20000000) /*!< SRAM1(112 KB) base address in the alias region */ -#define SRAM2_BASE ((uint32_t)0x2001C000) /*!< SRAM2(16 KB) base address in the alias region */ -#define SRAM3_BASE ((uint32_t)0x20020000) /*!< SRAM3(64 KB) base address in the alias region */ -#define PERIPH_BASE ((uint32_t)0x40000000) /*!< Peripheral base address in the alias region */ -#define BKPSRAM_BASE ((uint32_t)0x40024000) /*!< Backup SRAM(4 KB) base address in the alias region */ - -#if defined (STM32F40_41xxx) -#define FSMC_R_BASE ((uint32_t)0xA0000000) /*!< FSMC registers base address */ -#endif /* STM32F40_41xxx */ - -#if defined (STM32F427_437xx) || defined (STM32F429_439xx) -#define FMC_R_BASE ((uint32_t)0xA0000000) /*!< FMC registers base address */ -#endif /* STM32F427_437xx || STM32F429_439xx */ - -#define CCMDATARAM_BB_BASE ((uint32_t)0x12000000) /*!< CCM(core coupled memory) data RAM(64 KB) base address in the bit-band region */ -#define SRAM1_BB_BASE ((uint32_t)0x22000000) /*!< SRAM1(112 KB) base address in the bit-band region */ -#define SRAM2_BB_BASE ((uint32_t)0x2201C000) /*!< SRAM2(16 KB) base address in the bit-band region */ -#define SRAM3_BB_BASE ((uint32_t)0x22400000) /*!< SRAM3(64 KB) base address in the bit-band region */ -#define PERIPH_BB_BASE ((uint32_t)0x42000000) /*!< Peripheral base address in the bit-band region */ -#define BKPSRAM_BB_BASE ((uint32_t)0x42024000) /*!< Backup SRAM(4 KB) base address in the bit-band region */ - -/* Legacy defines */ -#define SRAM_BASE SRAM1_BASE -#define SRAM_BB_BASE SRAM1_BB_BASE - - -/*!< Peripheral memory map */ -#define APB1PERIPH_BASE PERIPH_BASE -#define APB2PERIPH_BASE (PERIPH_BASE + 0x00010000) -#define AHB1PERIPH_BASE (PERIPH_BASE + 0x00020000) -#define AHB2PERIPH_BASE (PERIPH_BASE + 0x10000000) - -/*!< APB1 peripherals */ -#define TIM2_BASE (APB1PERIPH_BASE + 0x0000) -#define TIM3_BASE (APB1PERIPH_BASE + 0x0400) -#define TIM4_BASE (APB1PERIPH_BASE + 0x0800) -#define TIM5_BASE (APB1PERIPH_BASE + 0x0C00) -#define TIM6_BASE (APB1PERIPH_BASE + 0x1000) -#define TIM7_BASE (APB1PERIPH_BASE + 0x1400) -#define TIM12_BASE (APB1PERIPH_BASE + 0x1800) -#define TIM13_BASE (APB1PERIPH_BASE + 0x1C00) -#define TIM14_BASE (APB1PERIPH_BASE + 0x2000) -#define RTC_BASE (APB1PERIPH_BASE + 0x2800) -#define WWDG_BASE (APB1PERIPH_BASE + 0x2C00) -#define IWDG_BASE (APB1PERIPH_BASE + 0x3000) -#define I2S2ext_BASE (APB1PERIPH_BASE + 0x3400) -#define SPI2_BASE (APB1PERIPH_BASE + 0x3800) -#define SPI3_BASE (APB1PERIPH_BASE + 0x3C00) -#define I2S3ext_BASE (APB1PERIPH_BASE + 0x4000) -#define USART2_BASE (APB1PERIPH_BASE + 0x4400) -#define USART3_BASE (APB1PERIPH_BASE + 0x4800) -#define UART4_BASE (APB1PERIPH_BASE + 0x4C00) -#define UART5_BASE (APB1PERIPH_BASE + 0x5000) -#define I2C1_BASE (APB1PERIPH_BASE + 0x5400) -#define I2C2_BASE (APB1PERIPH_BASE + 0x5800) -#define I2C3_BASE (APB1PERIPH_BASE + 0x5C00) -#define CAN1_BASE (APB1PERIPH_BASE + 0x6400) -#define CAN2_BASE (APB1PERIPH_BASE + 0x6800) -#define PWR_BASE (APB1PERIPH_BASE + 0x7000) -#define DAC_BASE (APB1PERIPH_BASE + 0x7400) -#define UART7_BASE (APB1PERIPH_BASE + 0x7800) -#define UART8_BASE (APB1PERIPH_BASE + 0x7C00) - -/*!< APB2 peripherals */ -#define TIM1_BASE (APB2PERIPH_BASE + 0x0000) -#define TIM8_BASE (APB2PERIPH_BASE + 0x0400) -#define USART1_BASE (APB2PERIPH_BASE + 0x1000) -#define USART6_BASE (APB2PERIPH_BASE + 0x1400) -#define ADC1_BASE (APB2PERIPH_BASE + 0x2000) -#define ADC2_BASE (APB2PERIPH_BASE + 0x2100) -#define ADC3_BASE (APB2PERIPH_BASE + 0x2200) -#define ADC_BASE (APB2PERIPH_BASE + 0x2300) -#define SDIO_BASE (APB2PERIPH_BASE + 0x2C00) -#define SPI1_BASE (APB2PERIPH_BASE + 0x3000) -#define SPI4_BASE (APB2PERIPH_BASE + 0x3400) -#define SYSCFG_BASE (APB2PERIPH_BASE + 0x3800) -#define EXTI_BASE (APB2PERIPH_BASE + 0x3C00) -#define TIM9_BASE (APB2PERIPH_BASE + 0x4000) -#define TIM10_BASE (APB2PERIPH_BASE + 0x4400) -#define TIM11_BASE (APB2PERIPH_BASE + 0x4800) -#define SPI5_BASE (APB2PERIPH_BASE + 0x5000) -#define SPI6_BASE (APB2PERIPH_BASE + 0x5400) -#define SAI1_BASE (APB2PERIPH_BASE + 0x5800) -#define SAI1_Block_A_BASE (SAI1_BASE + 0x004) -#define SAI1_Block_B_BASE (SAI1_BASE + 0x024) -#define LTDC_BASE (APB2PERIPH_BASE + 0x6800) -#define LTDC_Layer1_BASE (LTDC_BASE + 0x84) -#define LTDC_Layer2_BASE (LTDC_BASE + 0x104) - -/*!< AHB1 peripherals */ -#define GPIOA_BASE (AHB1PERIPH_BASE + 0x0000) -#define GPIOB_BASE (AHB1PERIPH_BASE + 0x0400) -#define GPIOC_BASE (AHB1PERIPH_BASE + 0x0800) -#define GPIOD_BASE (AHB1PERIPH_BASE + 0x0C00) -#define GPIOE_BASE (AHB1PERIPH_BASE + 0x1000) -#define GPIOF_BASE (AHB1PERIPH_BASE + 0x1400) -#define GPIOG_BASE (AHB1PERIPH_BASE + 0x1800) -#define GPIOH_BASE (AHB1PERIPH_BASE + 0x1C00) -#define GPIOI_BASE (AHB1PERIPH_BASE + 0x2000) -#define GPIOJ_BASE (AHB1PERIPH_BASE + 0x2400) -#define GPIOK_BASE (AHB1PERIPH_BASE + 0x2800) -#define CRC_BASE (AHB1PERIPH_BASE + 0x3000) -#define RCC_BASE (AHB1PERIPH_BASE + 0x3800) -#define FLASH_R_BASE (AHB1PERIPH_BASE + 0x3C00) -#define DMA1_BASE (AHB1PERIPH_BASE + 0x6000) -#define DMA1_Stream0_BASE (DMA1_BASE + 0x010) -#define DMA1_Stream1_BASE (DMA1_BASE + 0x028) -#define DMA1_Stream2_BASE (DMA1_BASE + 0x040) -#define DMA1_Stream3_BASE (DMA1_BASE + 0x058) -#define DMA1_Stream4_BASE (DMA1_BASE + 0x070) -#define DMA1_Stream5_BASE (DMA1_BASE + 0x088) -#define DMA1_Stream6_BASE (DMA1_BASE + 0x0A0) -#define DMA1_Stream7_BASE (DMA1_BASE + 0x0B8) -#define DMA2_BASE (AHB1PERIPH_BASE + 0x6400) -#define DMA2_Stream0_BASE (DMA2_BASE + 0x010) -#define DMA2_Stream1_BASE (DMA2_BASE + 0x028) -#define DMA2_Stream2_BASE (DMA2_BASE + 0x040) -#define DMA2_Stream3_BASE (DMA2_BASE + 0x058) -#define DMA2_Stream4_BASE (DMA2_BASE + 0x070) -#define DMA2_Stream5_BASE (DMA2_BASE + 0x088) -#define DMA2_Stream6_BASE (DMA2_BASE + 0x0A0) -#define DMA2_Stream7_BASE (DMA2_BASE + 0x0B8) -#define ETH_BASE (AHB1PERIPH_BASE + 0x8000) -#define ETH_MAC_BASE (ETH_BASE) -#define ETH_MMC_BASE (ETH_BASE + 0x0100) -#define ETH_PTP_BASE (ETH_BASE + 0x0700) -#define ETH_DMA_BASE (ETH_BASE + 0x1000) -#define DMA2D_BASE (AHB1PERIPH_BASE + 0xB000) - -/*!< AHB2 peripherals */ -#define DCMI_BASE (AHB2PERIPH_BASE + 0x50000) -#define CRYP_BASE (AHB2PERIPH_BASE + 0x60000) -#define HASH_BASE (AHB2PERIPH_BASE + 0x60400) -#define HASH_DIGEST_BASE (AHB2PERIPH_BASE + 0x60710) -#define RNG_BASE (AHB2PERIPH_BASE + 0x60800) - -#if defined (STM32F40_41xxx) -/*!< FSMC Bankx registers base address */ -#define FSMC_Bank1_R_BASE (FSMC_R_BASE + 0x0000) -#define FSMC_Bank1E_R_BASE (FSMC_R_BASE + 0x0104) -#define FSMC_Bank2_R_BASE (FSMC_R_BASE + 0x0060) -#define FSMC_Bank3_R_BASE (FSMC_R_BASE + 0x0080) -#define FSMC_Bank4_R_BASE (FSMC_R_BASE + 0x00A0) -#endif /* STM32F40_41xxx */ - -#if defined (STM32F427_437xx) || defined (STM32F429_439xx) -/*!< FMC Bankx registers base address */ -#define FMC_Bank1_R_BASE (FMC_R_BASE + 0x0000) -#define FMC_Bank1E_R_BASE (FMC_R_BASE + 0x0104) -#define FMC_Bank2_R_BASE (FMC_R_BASE + 0x0060) -#define FMC_Bank3_R_BASE (FMC_R_BASE + 0x0080) -#define FMC_Bank4_R_BASE (FMC_R_BASE + 0x00A0) -#define FMC_Bank5_6_R_BASE (FMC_R_BASE + 0x0140) -#endif /* STM32F427_437xx || STM32F429_439xx */ - -/* Debug MCU registers base address */ -#define DBGMCU_BASE ((uint32_t )0xE0042000) - -/** - * @} - */ - -/** @addtogroup Peripheral_declaration - * @{ - */ -#define TIM2 ((TIM_TypeDef *) TIM2_BASE) -#define TIM3 ((TIM_TypeDef *) TIM3_BASE) -#define TIM4 ((TIM_TypeDef *) TIM4_BASE) -#define TIM5 ((TIM_TypeDef *) TIM5_BASE) -#define TIM6 ((TIM_TypeDef *) TIM6_BASE) -#define TIM7 ((TIM_TypeDef *) TIM7_BASE) -#define TIM12 ((TIM_TypeDef *) TIM12_BASE) -#define TIM13 ((TIM_TypeDef *) TIM13_BASE) -#define TIM14 ((TIM_TypeDef *) TIM14_BASE) -#define RTC ((RTC_TypeDef *) RTC_BASE) -#define WWDG ((WWDG_TypeDef *) WWDG_BASE) -#define IWDG ((IWDG_TypeDef *) IWDG_BASE) -#define I2S2ext ((SPI_TypeDef *) I2S2ext_BASE) -#define SPI2 ((SPI_TypeDef *) SPI2_BASE) -#define SPI3 ((SPI_TypeDef *) SPI3_BASE) -#define I2S3ext ((SPI_TypeDef *) I2S3ext_BASE) -#define USART2 ((USART_TypeDef *) USART2_BASE) -#define USART3 ((USART_TypeDef *) USART3_BASE) -#define UART4 ((USART_TypeDef *) UART4_BASE) -#define UART5 ((USART_TypeDef *) UART5_BASE) -#define I2C1 ((I2C_TypeDef *) I2C1_BASE) -#define I2C2 ((I2C_TypeDef *) I2C2_BASE) -#define I2C3 ((I2C_TypeDef *) I2C3_BASE) -#define CAN1 ((CAN_TypeDef *) CAN1_BASE) -#define CAN2 ((CAN_TypeDef *) CAN2_BASE) -#define PWR ((PWR_TypeDef *) PWR_BASE) -#define DAC ((DAC_TypeDef *) DAC_BASE) -#define UART7 ((USART_TypeDef *) UART7_BASE) -#define UART8 ((USART_TypeDef *) UART8_BASE) -#define TIM1 ((TIM_TypeDef *) TIM1_BASE) -#define TIM8 ((TIM_TypeDef *) TIM8_BASE) -#define USART1 ((USART_TypeDef *) USART1_BASE) -#define USART6 ((USART_TypeDef *) USART6_BASE) -#define ADC ((ADC_Common_TypeDef *) ADC_BASE) -#define ADC1 ((ADC_TypeDef *) ADC1_BASE) -#define ADC2 ((ADC_TypeDef *) ADC2_BASE) -#define ADC3 ((ADC_TypeDef *) ADC3_BASE) -#define SDIO ((SDIO_TypeDef *) SDIO_BASE) -#define SPI1 ((SPI_TypeDef *) SPI1_BASE) -#define SPI4 ((SPI_TypeDef *) SPI4_BASE) -#define SYSCFG ((SYSCFG_TypeDef *) SYSCFG_BASE) -#define EXTI ((EXTI_TypeDef *) EXTI_BASE) -#define TIM9 ((TIM_TypeDef *) TIM9_BASE) -#define TIM10 ((TIM_TypeDef *) TIM10_BASE) -#define TIM11 ((TIM_TypeDef *) TIM11_BASE) -#define SPI5 ((SPI_TypeDef *) SPI5_BASE) -#define SPI6 ((SPI_TypeDef *) SPI6_BASE) -#define SAI1 ((SAI_TypeDef *) SAI1_BASE) -#define SAI1_Block_A ((SAI_Block_TypeDef *)SAI1_Block_A_BASE) -#define SAI1_Block_B ((SAI_Block_TypeDef *)SAI1_Block_B_BASE) -#define LTDC ((LTDC_TypeDef *)LTDC_BASE) -#define LTDC_Layer1 ((LTDC_Layer_TypeDef *)LTDC_Layer1_BASE) -#define LTDC_Layer2 ((LTDC_Layer_TypeDef *)LTDC_Layer2_BASE) -#define GPIOA ((GPIO_TypeDef *) GPIOA_BASE) -#define GPIOB ((GPIO_TypeDef *) GPIOB_BASE) -#define GPIOC ((GPIO_TypeDef *) GPIOC_BASE) -#define GPIOD ((GPIO_TypeDef *) GPIOD_BASE) -#define GPIOE ((GPIO_TypeDef *) GPIOE_BASE) -#define GPIOF ((GPIO_TypeDef *) GPIOF_BASE) -#define GPIOG ((GPIO_TypeDef *) GPIOG_BASE) -#define GPIOH ((GPIO_TypeDef *) GPIOH_BASE) -#define GPIOI ((GPIO_TypeDef *) GPIOI_BASE) -#define GPIOJ ((GPIO_TypeDef *) GPIOJ_BASE) -#define GPIOK ((GPIO_TypeDef *) GPIOK_BASE) -#define CRC ((CRC_TypeDef *) CRC_BASE) -#define RCC ((RCC_TypeDef *) RCC_BASE) -#define FLASH ((FLASH_TypeDef *) FLASH_R_BASE) -#define DMA1 ((DMA_TypeDef *) DMA1_BASE) -#define DMA1_Stream0 ((DMA_Stream_TypeDef *) DMA1_Stream0_BASE) -#define DMA1_Stream1 ((DMA_Stream_TypeDef *) DMA1_Stream1_BASE) -#define DMA1_Stream2 ((DMA_Stream_TypeDef *) DMA1_Stream2_BASE) -#define DMA1_Stream3 ((DMA_Stream_TypeDef *) DMA1_Stream3_BASE) -#define DMA1_Stream4 ((DMA_Stream_TypeDef *) DMA1_Stream4_BASE) -#define DMA1_Stream5 ((DMA_Stream_TypeDef *) DMA1_Stream5_BASE) -#define DMA1_Stream6 ((DMA_Stream_TypeDef *) DMA1_Stream6_BASE) -#define DMA1_Stream7 ((DMA_Stream_TypeDef *) DMA1_Stream7_BASE) -#define DMA2 ((DMA_TypeDef *) DMA2_BASE) -#define DMA2_Stream0 ((DMA_Stream_TypeDef *) DMA2_Stream0_BASE) -#define DMA2_Stream1 ((DMA_Stream_TypeDef *) DMA2_Stream1_BASE) -#define DMA2_Stream2 ((DMA_Stream_TypeDef *) DMA2_Stream2_BASE) -#define DMA2_Stream3 ((DMA_Stream_TypeDef *) DMA2_Stream3_BASE) -#define DMA2_Stream4 ((DMA_Stream_TypeDef *) DMA2_Stream4_BASE) -#define DMA2_Stream5 ((DMA_Stream_TypeDef *) DMA2_Stream5_BASE) -#define DMA2_Stream6 ((DMA_Stream_TypeDef *) DMA2_Stream6_BASE) -#define DMA2_Stream7 ((DMA_Stream_TypeDef *) DMA2_Stream7_BASE) -#define ETH ((ETH_TypeDef *) ETH_BASE) -#define DMA2D ((DMA2D_TypeDef *)DMA2D_BASE) -#define DCMI ((DCMI_TypeDef *) DCMI_BASE) -#define CRYP ((CRYP_TypeDef *) CRYP_BASE) -#define HASH ((HASH_TypeDef *) HASH_BASE) -#define HASH_DIGEST ((HASH_DIGEST_TypeDef *) HASH_DIGEST_BASE) -#define RNG ((RNG_TypeDef *) RNG_BASE) - -#if defined (STM32F40_41xxx) -#define FSMC_Bank1 ((FSMC_Bank1_TypeDef *) FSMC_Bank1_R_BASE) -#define FSMC_Bank1E ((FSMC_Bank1E_TypeDef *) FSMC_Bank1E_R_BASE) -#define FSMC_Bank2 ((FSMC_Bank2_TypeDef *) FSMC_Bank2_R_BASE) -#define FSMC_Bank3 ((FSMC_Bank3_TypeDef *) FSMC_Bank3_R_BASE) -#define FSMC_Bank4 ((FSMC_Bank4_TypeDef *) FSMC_Bank4_R_BASE) -#endif /* STM32F40_41xxx */ - -#if defined (STM32F427_437xx) || defined (STM32F429_439xx) -#define FMC_Bank1 ((FMC_Bank1_TypeDef *) FMC_Bank1_R_BASE) -#define FMC_Bank1E ((FMC_Bank1E_TypeDef *) FMC_Bank1E_R_BASE) -#define FMC_Bank2 ((FMC_Bank2_TypeDef *) FMC_Bank2_R_BASE) -#define FMC_Bank3 ((FMC_Bank3_TypeDef *) FMC_Bank3_R_BASE) -#define FMC_Bank4 ((FMC_Bank4_TypeDef *) FMC_Bank4_R_BASE) -#define FMC_Bank5_6 ((FMC_Bank5_6_TypeDef *) FMC_Bank5_6_R_BASE) -#endif /* STM32F427_437xx || STM32F429_439xx */ - -#define DBGMCU ((DBGMCU_TypeDef *) DBGMCU_BASE) - -/** - * @} - */ - -/** @addtogroup Exported_constants - * @{ - */ - - /** @addtogroup Peripheral_Registers_Bits_Definition - * @{ - */ - -/******************************************************************************/ -/* Peripheral Registers_Bits_Definition */ -/******************************************************************************/ - -/******************************************************************************/ -/* */ -/* Analog to Digital Converter */ -/* */ -/******************************************************************************/ -/******************** Bit definition for ADC_SR register ********************/ -#define ADC_SR_AWD ((uint8_t)0x01) /*!
© COPYRIGHT 2013 STMicroelectronics
- * - * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License"); - * You may not use this file except in compliance with the License. - * You may obtain a copy of the License at: - * - * http://www.st.com/software_license_agreement_liberty_v2 - * - * Unless required by applicable law or agreed to in writing, software - * distributed under the License is distributed on an "AS IS" BASIS, - * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - * See the License for the specific language governing permissions and - * limitations under the License. - * - ****************************************************************************** - */ - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx_adc.h" -#include "stm32f4xx_rcc.h" - -/** @addtogroup STM32F4xx_StdPeriph_Driver - * @{ - */ - -/** @defgroup ADC - * @brief ADC driver modules - * @{ - */ - -/* Private typedef -----------------------------------------------------------*/ -/* Private define ------------------------------------------------------------*/ - -/* ADC DISCNUM mask */ -#define CR1_DISCNUM_RESET ((uint32_t)0xFFFF1FFF) - -/* ADC AWDCH mask */ -#define CR1_AWDCH_RESET ((uint32_t)0xFFFFFFE0) - -/* ADC Analog watchdog enable mode mask */ -#define CR1_AWDMode_RESET ((uint32_t)0xFF3FFDFF) - -/* CR1 register Mask */ -#define CR1_CLEAR_MASK ((uint32_t)0xFCFFFEFF) - -/* ADC EXTEN mask */ -#define CR2_EXTEN_RESET ((uint32_t)0xCFFFFFFF) - -/* ADC JEXTEN mask */ -#define CR2_JEXTEN_RESET ((uint32_t)0xFFCFFFFF) - -/* ADC JEXTSEL mask */ -#define CR2_JEXTSEL_RESET ((uint32_t)0xFFF0FFFF) - -/* CR2 register Mask */ -#define CR2_CLEAR_MASK ((uint32_t)0xC0FFF7FD) - -/* ADC SQx mask */ -#define SQR3_SQ_SET ((uint32_t)0x0000001F) -#define SQR2_SQ_SET ((uint32_t)0x0000001F) -#define SQR1_SQ_SET ((uint32_t)0x0000001F) - -/* ADC L Mask */ -#define SQR1_L_RESET ((uint32_t)0xFF0FFFFF) - -/* ADC JSQx mask */ -#define JSQR_JSQ_SET ((uint32_t)0x0000001F) - -/* ADC JL mask */ -#define JSQR_JL_SET ((uint32_t)0x00300000) -#define JSQR_JL_RESET ((uint32_t)0xFFCFFFFF) - -/* ADC SMPx mask */ -#define SMPR1_SMP_SET ((uint32_t)0x00000007) -#define SMPR2_SMP_SET ((uint32_t)0x00000007) - -/* ADC JDRx registers offset */ -#define JDR_OFFSET ((uint8_t)0x28) - -/* ADC CDR register base address */ -#define CDR_ADDRESS ((uint32_t)0x40012308) - -/* ADC CCR register Mask */ -#define CR_CLEAR_MASK ((uint32_t)0xFFFC30E0) - -/* Private macro -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -/* Private function prototypes -----------------------------------------------*/ -/* Private functions ---------------------------------------------------------*/ - -/** @defgroup ADC_Private_Functions - * @{ - */ - -/** @defgroup ADC_Group1 Initialization and Configuration functions - * @brief Initialization and Configuration functions - * -@verbatim - =============================================================================== - ##### Initialization and Configuration functions ##### - =============================================================================== - [..] This section provides functions allowing to: - (+) Initialize and configure the ADC Prescaler - (+) ADC Conversion Resolution (12bit..6bit) - (+) Scan Conversion Mode (multichannel or one channel) for regular group - (+) ADC Continuous Conversion Mode (Continuous or Single conversion) for - regular group - (+) External trigger Edge and source of regular group, - (+) Converted data alignment (left or right) - (+) The number of ADC conversions that will be done using the sequencer for - regular channel group - (+) Multi ADC mode selection - (+) Direct memory access mode selection for multi ADC mode - (+) Delay between 2 sampling phases (used in dual or triple interleaved modes) - (+) Enable or disable the ADC peripheral -@endverbatim - * @{ - */ - -/** - * @brief Deinitializes all ADCs peripherals registers to their default reset - * values. - * @param None - * @retval None - */ -void ADC_DeInit(void) -{ - /* Enable all ADCs reset state */ - RCC_APB2PeriphResetCmd(RCC_APB2Periph_ADC, ENABLE); - - /* Release all ADCs from reset state */ - RCC_APB2PeriphResetCmd(RCC_APB2Periph_ADC, DISABLE); -} - -/** - * @brief Initializes the ADCx peripheral according to the specified parameters - * in the ADC_InitStruct. - * @note This function is used to configure the global features of the ADC ( - * Resolution and Data Alignment), however, the rest of the configuration - * parameters are specific to the regular channels group (scan mode - * activation, continuous mode activation, External trigger source and - * edge, number of conversion in the regular channels group sequencer). - * @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral. - * @param ADC_InitStruct: pointer to an ADC_InitTypeDef structure that contains - * the configuration information for the specified ADC peripheral. - * @retval None - */ -void ADC_Init(ADC_TypeDef* ADCx, ADC_InitTypeDef* ADC_InitStruct) -{ - uint32_t tmpreg1 = 0; - uint8_t tmpreg2 = 0; - /* Check the parameters */ - assert_param(IS_ADC_ALL_PERIPH(ADCx)); - assert_param(IS_ADC_RESOLUTION(ADC_InitStruct->ADC_Resolution)); - assert_param(IS_FUNCTIONAL_STATE(ADC_InitStruct->ADC_ScanConvMode)); - assert_param(IS_FUNCTIONAL_STATE(ADC_InitStruct->ADC_ContinuousConvMode)); - assert_param(IS_ADC_EXT_TRIG_EDGE(ADC_InitStruct->ADC_ExternalTrigConvEdge)); - assert_param(IS_ADC_EXT_TRIG(ADC_InitStruct->ADC_ExternalTrigConv)); - assert_param(IS_ADC_DATA_ALIGN(ADC_InitStruct->ADC_DataAlign)); - assert_param(IS_ADC_REGULAR_LENGTH(ADC_InitStruct->ADC_NbrOfConversion)); - - /*---------------------------- ADCx CR1 Configuration -----------------*/ - /* Get the ADCx CR1 value */ - tmpreg1 = ADCx->CR1; - - /* Clear RES and SCAN bits */ - tmpreg1 &= CR1_CLEAR_MASK; - - /* Configure ADCx: scan conversion mode and resolution */ - /* Set SCAN bit according to ADC_ScanConvMode value */ - /* Set RES bit according to ADC_Resolution value */ - tmpreg1 |= (uint32_t)(((uint32_t)ADC_InitStruct->ADC_ScanConvMode << 8) | \ - ADC_InitStruct->ADC_Resolution); - /* Write to ADCx CR1 */ - ADCx->CR1 = tmpreg1; - /*---------------------------- ADCx CR2 Configuration -----------------*/ - /* Get the ADCx CR2 value */ - tmpreg1 = ADCx->CR2; - - /* Clear CONT, ALIGN, EXTEN and EXTSEL bits */ - tmpreg1 &= CR2_CLEAR_MASK; - - /* Configure ADCx: external trigger event and edge, data alignment and - continuous conversion mode */ - /* Set ALIGN bit according to ADC_DataAlign value */ - /* Set EXTEN bits according to ADC_ExternalTrigConvEdge value */ - /* Set EXTSEL bits according to ADC_ExternalTrigConv value */ - /* Set CONT bit according to ADC_ContinuousConvMode value */ - tmpreg1 |= (uint32_t)(ADC_InitStruct->ADC_DataAlign | \ - ADC_InitStruct->ADC_ExternalTrigConv | - ADC_InitStruct->ADC_ExternalTrigConvEdge | \ - ((uint32_t)ADC_InitStruct->ADC_ContinuousConvMode << 1)); - - /* Write to ADCx CR2 */ - ADCx->CR2 = tmpreg1; - /*---------------------------- ADCx SQR1 Configuration -----------------*/ - /* Get the ADCx SQR1 value */ - tmpreg1 = ADCx->SQR1; - - /* Clear L bits */ - tmpreg1 &= SQR1_L_RESET; - - /* Configure ADCx: regular channel sequence length */ - /* Set L bits according to ADC_NbrOfConversion value */ - tmpreg2 |= (uint8_t)(ADC_InitStruct->ADC_NbrOfConversion - (uint8_t)1); - tmpreg1 |= ((uint32_t)tmpreg2 << 20); - - /* Write to ADCx SQR1 */ - ADCx->SQR1 = tmpreg1; -} - -/** - * @brief Fills each ADC_InitStruct member with its default value. - * @note This function is used to initialize the global features of the ADC ( - * Resolution and Data Alignment), however, the rest of the configuration - * parameters are specific to the regular channels group (scan mode - * activation, continuous mode activation, External trigger source and - * edge, number of conversion in the regular channels group sequencer). - * @param ADC_InitStruct: pointer to an ADC_InitTypeDef structure which will - * be initialized. - * @retval None - */ -void ADC_StructInit(ADC_InitTypeDef* ADC_InitStruct) -{ - /* Initialize the ADC_Mode member */ - ADC_InitStruct->ADC_Resolution = ADC_Resolution_12b; - - /* initialize the ADC_ScanConvMode member */ - ADC_InitStruct->ADC_ScanConvMode = DISABLE; - - /* Initialize the ADC_ContinuousConvMode member */ - ADC_InitStruct->ADC_ContinuousConvMode = DISABLE; - - /* Initialize the ADC_ExternalTrigConvEdge member */ - ADC_InitStruct->ADC_ExternalTrigConvEdge = ADC_ExternalTrigConvEdge_None; - - /* Initialize the ADC_ExternalTrigConv member */ - ADC_InitStruct->ADC_ExternalTrigConv = ADC_ExternalTrigConv_T1_CC1; - - /* Initialize the ADC_DataAlign member */ - ADC_InitStruct->ADC_DataAlign = ADC_DataAlign_Right; - - /* Initialize the ADC_NbrOfConversion member */ - ADC_InitStruct->ADC_NbrOfConversion = 1; -} - -/** - * @brief Initializes the ADCs peripherals according to the specified parameters - * in the ADC_CommonInitStruct. - * @param ADC_CommonInitStruct: pointer to an ADC_CommonInitTypeDef structure - * that contains the configuration information for All ADCs peripherals. - * @retval None - */ -void ADC_CommonInit(ADC_CommonInitTypeDef* ADC_CommonInitStruct) -{ - uint32_t tmpreg1 = 0; - /* Check the parameters */ - assert_param(IS_ADC_MODE(ADC_CommonInitStruct->ADC_Mode)); - assert_param(IS_ADC_PRESCALER(ADC_CommonInitStruct->ADC_Prescaler)); - assert_param(IS_ADC_DMA_ACCESS_MODE(ADC_CommonInitStruct->ADC_DMAAccessMode)); - assert_param(IS_ADC_SAMPLING_DELAY(ADC_CommonInitStruct->ADC_TwoSamplingDelay)); - /*---------------------------- ADC CCR Configuration -----------------*/ - /* Get the ADC CCR value */ - tmpreg1 = ADC->CCR; - - /* Clear MULTI, DELAY, DMA and ADCPRE bits */ - tmpreg1 &= CR_CLEAR_MASK; - - /* Configure ADCx: Multi mode, Delay between two sampling time, ADC prescaler, - and DMA access mode for multimode */ - /* Set MULTI bits according to ADC_Mode value */ - /* Set ADCPRE bits according to ADC_Prescaler value */ - /* Set DMA bits according to ADC_DMAAccessMode value */ - /* Set DELAY bits according to ADC_TwoSamplingDelay value */ - tmpreg1 |= (uint32_t)(ADC_CommonInitStruct->ADC_Mode | - ADC_CommonInitStruct->ADC_Prescaler | - ADC_CommonInitStruct->ADC_DMAAccessMode | - ADC_CommonInitStruct->ADC_TwoSamplingDelay); - - /* Write to ADC CCR */ - ADC->CCR = tmpreg1; -} - -/** - * @brief Fills each ADC_CommonInitStruct member with its default value. - * @param ADC_CommonInitStruct: pointer to an ADC_CommonInitTypeDef structure - * which will be initialized. - * @retval None - */ -void ADC_CommonStructInit(ADC_CommonInitTypeDef* ADC_CommonInitStruct) -{ - /* Initialize the ADC_Mode member */ - ADC_CommonInitStruct->ADC_Mode = ADC_Mode_Independent; - - /* initialize the ADC_Prescaler member */ - ADC_CommonInitStruct->ADC_Prescaler = ADC_Prescaler_Div2; - - /* Initialize the ADC_DMAAccessMode member */ - ADC_CommonInitStruct->ADC_DMAAccessMode = ADC_DMAAccessMode_Disabled; - - /* Initialize the ADC_TwoSamplingDelay member */ - ADC_CommonInitStruct->ADC_TwoSamplingDelay = ADC_TwoSamplingDelay_5Cycles; -} - -/** - * @brief Enables or disables the specified ADC peripheral. - * @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral. - * @param NewState: new state of the ADCx peripheral. - * This parameter can be: ENABLE or DISABLE. - * @retval None - */ -void ADC_Cmd(ADC_TypeDef* ADCx, FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_ADC_ALL_PERIPH(ADCx)); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - if (NewState != DISABLE) - { - /* Set the ADON bit to wake up the ADC from power down mode */ - ADCx->CR2 |= (uint32_t)ADC_CR2_ADON; - } - else - { - /* Disable the selected ADC peripheral */ - ADCx->CR2 &= (uint32_t)(~ADC_CR2_ADON); - } -} -/** - * @} - */ - -/** @defgroup ADC_Group2 Analog Watchdog configuration functions - * @brief Analog Watchdog configuration functions - * -@verbatim - =============================================================================== - ##### Analog Watchdog configuration functions ##### - =============================================================================== - [..] This section provides functions allowing to configure the Analog Watchdog - (AWD) feature in the ADC. - - [..] A typical configuration Analog Watchdog is done following these steps : - (#) the ADC guarded channel(s) is (are) selected using the - ADC_AnalogWatchdogSingleChannelConfig() function. - (#) The Analog watchdog lower and higher threshold are configured using the - ADC_AnalogWatchdogThresholdsConfig() function. - (#) The Analog watchdog is enabled and configured to enable the check, on one - or more channels, using the ADC_AnalogWatchdogCmd() function. -@endverbatim - * @{ - */ - -/** - * @brief Enables or disables the analog watchdog on single/all regular or - * injected channels - * @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral. - * @param ADC_AnalogWatchdog: the ADC analog watchdog configuration. - * This parameter can be one of the following values: - * @arg ADC_AnalogWatchdog_SingleRegEnable: Analog watchdog on a single regular channel - * @arg ADC_AnalogWatchdog_SingleInjecEnable: Analog watchdog on a single injected channel - * @arg ADC_AnalogWatchdog_SingleRegOrInjecEnable: Analog watchdog on a single regular or injected channel - * @arg ADC_AnalogWatchdog_AllRegEnable: Analog watchdog on all regular channel - * @arg ADC_AnalogWatchdog_AllInjecEnable: Analog watchdog on all injected channel - * @arg ADC_AnalogWatchdog_AllRegAllInjecEnable: Analog watchdog on all regular and injected channels - * @arg ADC_AnalogWatchdog_None: No channel guarded by the analog watchdog - * @retval None - */ -void ADC_AnalogWatchdogCmd(ADC_TypeDef* ADCx, uint32_t ADC_AnalogWatchdog) -{ - uint32_t tmpreg = 0; - /* Check the parameters */ - assert_param(IS_ADC_ALL_PERIPH(ADCx)); - assert_param(IS_ADC_ANALOG_WATCHDOG(ADC_AnalogWatchdog)); - - /* Get the old register value */ - tmpreg = ADCx->CR1; - - /* Clear AWDEN, JAWDEN and AWDSGL bits */ - tmpreg &= CR1_AWDMode_RESET; - - /* Set the analog watchdog enable mode */ - tmpreg |= ADC_AnalogWatchdog; - - /* Store the new register value */ - ADCx->CR1 = tmpreg; -} - -/** - * @brief Configures the high and low thresholds of the analog watchdog. - * @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral. - * @param HighThreshold: the ADC analog watchdog High threshold value. - * This parameter must be a 12-bit value. - * @param LowThreshold: the ADC analog watchdog Low threshold value. - * This parameter must be a 12-bit value. - * @retval None - */ -void ADC_AnalogWatchdogThresholdsConfig(ADC_TypeDef* ADCx, uint16_t HighThreshold, - uint16_t LowThreshold) -{ - /* Check the parameters */ - assert_param(IS_ADC_ALL_PERIPH(ADCx)); - assert_param(IS_ADC_THRESHOLD(HighThreshold)); - assert_param(IS_ADC_THRESHOLD(LowThreshold)); - - /* Set the ADCx high threshold */ - ADCx->HTR = HighThreshold; - - /* Set the ADCx low threshold */ - ADCx->LTR = LowThreshold; -} - -/** - * @brief Configures the analog watchdog guarded single channel - * @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral. - * @param ADC_Channel: the ADC channel to configure for the analog watchdog. - * This parameter can be one of the following values: - * @arg ADC_Channel_0: ADC Channel0 selected - * @arg ADC_Channel_1: ADC Channel1 selected - * @arg ADC_Channel_2: ADC Channel2 selected - * @arg ADC_Channel_3: ADC Channel3 selected - * @arg ADC_Channel_4: ADC Channel4 selected - * @arg ADC_Channel_5: ADC Channel5 selected - * @arg ADC_Channel_6: ADC Channel6 selected - * @arg ADC_Channel_7: ADC Channel7 selected - * @arg ADC_Channel_8: ADC Channel8 selected - * @arg ADC_Channel_9: ADC Channel9 selected - * @arg ADC_Channel_10: ADC Channel10 selected - * @arg ADC_Channel_11: ADC Channel11 selected - * @arg ADC_Channel_12: ADC Channel12 selected - * @arg ADC_Channel_13: ADC Channel13 selected - * @arg ADC_Channel_14: ADC Channel14 selected - * @arg ADC_Channel_15: ADC Channel15 selected - * @arg ADC_Channel_16: ADC Channel16 selected - * @arg ADC_Channel_17: ADC Channel17 selected - * @arg ADC_Channel_18: ADC Channel18 selected - * @retval None - */ -void ADC_AnalogWatchdogSingleChannelConfig(ADC_TypeDef* ADCx, uint8_t ADC_Channel) -{ - uint32_t tmpreg = 0; - /* Check the parameters */ - assert_param(IS_ADC_ALL_PERIPH(ADCx)); - assert_param(IS_ADC_CHANNEL(ADC_Channel)); - - /* Get the old register value */ - tmpreg = ADCx->CR1; - - /* Clear the Analog watchdog channel select bits */ - tmpreg &= CR1_AWDCH_RESET; - - /* Set the Analog watchdog channel */ - tmpreg |= ADC_Channel; - - /* Store the new register value */ - ADCx->CR1 = tmpreg; -} -/** - * @} - */ - -/** @defgroup ADC_Group3 Temperature Sensor, Vrefint (Voltage Reference internal) - * and VBAT (Voltage BATtery) management functions - * @brief Temperature Sensor, Vrefint and VBAT management functions - * -@verbatim - =============================================================================== - ##### Temperature Sensor, Vrefint and VBAT management functions ##### - =============================================================================== - [..] This section provides functions allowing to enable/ disable the internal - connections between the ADC and the Temperature Sensor, the Vrefint and - the Vbat sources. - - [..] A typical configuration to get the Temperature sensor and Vrefint channels - voltages is done following these steps : - (#) Enable the internal connection of Temperature sensor and Vrefint sources - with the ADC channels using ADC_TempSensorVrefintCmd() function. - (#) Select the ADC_Channel_TempSensor and/or ADC_Channel_Vrefint using - ADC_RegularChannelConfig() or ADC_InjectedChannelConfig() functions - (#) Get the voltage values, using ADC_GetConversionValue() or - ADC_GetInjectedConversionValue(). - - [..] A typical configuration to get the VBAT channel voltage is done following - these steps : - (#) Enable the internal connection of VBAT source with the ADC channel using - ADC_VBATCmd() function. - (#) Select the ADC_Channel_Vbat using ADC_RegularChannelConfig() or - ADC_InjectedChannelConfig() functions - (#) Get the voltage value, using ADC_GetConversionValue() or - ADC_GetInjectedConversionValue(). - -@endverbatim - * @{ - */ - - -/** - * @brief Enables or disables the temperature sensor and Vrefint channels. - * @param NewState: new state of the temperature sensor and Vrefint channels. - * This parameter can be: ENABLE or DISABLE. - * @retval None - */ -void ADC_TempSensorVrefintCmd(FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_FUNCTIONAL_STATE(NewState)); - if (NewState != DISABLE) - { - /* Enable the temperature sensor and Vrefint channel*/ - ADC->CCR |= (uint32_t)ADC_CCR_TSVREFE; - } - else - { - /* Disable the temperature sensor and Vrefint channel*/ - ADC->CCR &= (uint32_t)(~ADC_CCR_TSVREFE); - } -} - -/** - * @brief Enables or disables the VBAT (Voltage Battery) channel. - * - * @note the Battery voltage measured is equal to VBAT/2 on STM32F40xx and - * STM32F41xx devices and equal to VBAT/4 on STM32F42xx and STM32F43xx devices - * - * @param NewState: new state of the VBAT channel. - * This parameter can be: ENABLE or DISABLE. - * @retval None - */ -void ADC_VBATCmd(FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_FUNCTIONAL_STATE(NewState)); - if (NewState != DISABLE) - { - /* Enable the VBAT channel*/ - ADC->CCR |= (uint32_t)ADC_CCR_VBATE; - } - else - { - /* Disable the VBAT channel*/ - ADC->CCR &= (uint32_t)(~ADC_CCR_VBATE); - } -} - -/** - * @} - */ - -/** @defgroup ADC_Group4 Regular Channels Configuration functions - * @brief Regular Channels Configuration functions - * -@verbatim - =============================================================================== - ##### Regular Channels Configuration functions ##### - =============================================================================== - - [..] This section provides functions allowing to manage the ADC's regular channels, - it is composed of 2 sub sections : - - (#) Configuration and management functions for regular channels: This subsection - provides functions allowing to configure the ADC regular channels : - (++) Configure the rank in the regular group sequencer for each channel - (++) Configure the sampling time for each channel - (++) select the conversion Trigger for regular channels - (++) select the desired EOC event behavior configuration - (++) Activate the continuous Mode (*) - (++) Activate the Discontinuous Mode - -@@- Please Note that the following features for regular channels - are configurated using the ADC_Init() function : - (+@@) scan mode activation - (+@@) continuous mode activation (**) - (+@@) External trigger source - (+@@) External trigger edge - (+@@) number of conversion in the regular channels group sequencer. - - -@@- (*) and (**) are performing the same configuration - - (#) Get the conversion data: This subsection provides an important function in - the ADC peripheral since it returns the converted data of the current - regular channel. When the Conversion value is read, the EOC Flag is - automatically cleared. - - -@- For multi ADC mode, the last ADC1, ADC2 and ADC3 regular conversions - results data (in the selected multi mode) can be returned in the same - time using ADC_GetMultiModeConversionValue() function. - -@endverbatim - * @{ - */ -/** - * @brief Configures for the selected ADC regular channel its corresponding - * rank in the sequencer and its sample time. - * @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral. - * @param ADC_Channel: the ADC channel to configure. - * This parameter can be one of the following values: - * @arg ADC_Channel_0: ADC Channel0 selected - * @arg ADC_Channel_1: ADC Channel1 selected - * @arg ADC_Channel_2: ADC Channel2 selected - * @arg ADC_Channel_3: ADC Channel3 selected - * @arg ADC_Channel_4: ADC Channel4 selected - * @arg ADC_Channel_5: ADC Channel5 selected - * @arg ADC_Channel_6: ADC Channel6 selected - * @arg ADC_Channel_7: ADC Channel7 selected - * @arg ADC_Channel_8: ADC Channel8 selected - * @arg ADC_Channel_9: ADC Channel9 selected - * @arg ADC_Channel_10: ADC Channel10 selected - * @arg ADC_Channel_11: ADC Channel11 selected - * @arg ADC_Channel_12: ADC Channel12 selected - * @arg ADC_Channel_13: ADC Channel13 selected - * @arg ADC_Channel_14: ADC Channel14 selected - * @arg ADC_Channel_15: ADC Channel15 selected - * @arg ADC_Channel_16: ADC Channel16 selected - * @arg ADC_Channel_17: ADC Channel17 selected - * @arg ADC_Channel_18: ADC Channel18 selected - * @param Rank: The rank in the regular group sequencer. - * This parameter must be between 1 to 16. - * @param ADC_SampleTime: The sample time value to be set for the selected channel. - * This parameter can be one of the following values: - * @arg ADC_SampleTime_3Cycles: Sample time equal to 3 cycles - * @arg ADC_SampleTime_15Cycles: Sample time equal to 15 cycles - * @arg ADC_SampleTime_28Cycles: Sample time equal to 28 cycles - * @arg ADC_SampleTime_56Cycles: Sample time equal to 56 cycles - * @arg ADC_SampleTime_84Cycles: Sample time equal to 84 cycles - * @arg ADC_SampleTime_112Cycles: Sample time equal to 112 cycles - * @arg ADC_SampleTime_144Cycles: Sample time equal to 144 cycles - * @arg ADC_SampleTime_480Cycles: Sample time equal to 480 cycles - * @retval None - */ -void ADC_RegularChannelConfig(ADC_TypeDef* ADCx, uint8_t ADC_Channel, uint8_t Rank, uint8_t ADC_SampleTime) -{ - uint32_t tmpreg1 = 0, tmpreg2 = 0; - /* Check the parameters */ - assert_param(IS_ADC_ALL_PERIPH(ADCx)); - assert_param(IS_ADC_CHANNEL(ADC_Channel)); - assert_param(IS_ADC_REGULAR_RANK(Rank)); - assert_param(IS_ADC_SAMPLE_TIME(ADC_SampleTime)); - - /* if ADC_Channel_10 ... ADC_Channel_18 is selected */ - if (ADC_Channel > ADC_Channel_9) - { - /* Get the old register value */ - tmpreg1 = ADCx->SMPR1; - - /* Calculate the mask to clear */ - tmpreg2 = SMPR1_SMP_SET << (3 * (ADC_Channel - 10)); - - /* Clear the old sample time */ - tmpreg1 &= ~tmpreg2; - - /* Calculate the mask to set */ - tmpreg2 = (uint32_t)ADC_SampleTime << (3 * (ADC_Channel - 10)); - - /* Set the new sample time */ - tmpreg1 |= tmpreg2; - - /* Store the new register value */ - ADCx->SMPR1 = tmpreg1; - } - else /* ADC_Channel include in ADC_Channel_[0..9] */ - { - /* Get the old register value */ - tmpreg1 = ADCx->SMPR2; - - /* Calculate the mask to clear */ - tmpreg2 = SMPR2_SMP_SET << (3 * ADC_Channel); - - /* Clear the old sample time */ - tmpreg1 &= ~tmpreg2; - - /* Calculate the mask to set */ - tmpreg2 = (uint32_t)ADC_SampleTime << (3 * ADC_Channel); - - /* Set the new sample time */ - tmpreg1 |= tmpreg2; - - /* Store the new register value */ - ADCx->SMPR2 = tmpreg1; - } - /* For Rank 1 to 6 */ - if (Rank < 7) - { - /* Get the old register value */ - tmpreg1 = ADCx->SQR3; - - /* Calculate the mask to clear */ - tmpreg2 = SQR3_SQ_SET << (5 * (Rank - 1)); - - /* Clear the old SQx bits for the selected rank */ - tmpreg1 &= ~tmpreg2; - - /* Calculate the mask to set */ - tmpreg2 = (uint32_t)ADC_Channel << (5 * (Rank - 1)); - - /* Set the SQx bits for the selected rank */ - tmpreg1 |= tmpreg2; - - /* Store the new register value */ - ADCx->SQR3 = tmpreg1; - } - /* For Rank 7 to 12 */ - else if (Rank < 13) - { - /* Get the old register value */ - tmpreg1 = ADCx->SQR2; - - /* Calculate the mask to clear */ - tmpreg2 = SQR2_SQ_SET << (5 * (Rank - 7)); - - /* Clear the old SQx bits for the selected rank */ - tmpreg1 &= ~tmpreg2; - - /* Calculate the mask to set */ - tmpreg2 = (uint32_t)ADC_Channel << (5 * (Rank - 7)); - - /* Set the SQx bits for the selected rank */ - tmpreg1 |= tmpreg2; - - /* Store the new register value */ - ADCx->SQR2 = tmpreg1; - } - /* For Rank 13 to 16 */ - else - { - /* Get the old register value */ - tmpreg1 = ADCx->SQR1; - - /* Calculate the mask to clear */ - tmpreg2 = SQR1_SQ_SET << (5 * (Rank - 13)); - - /* Clear the old SQx bits for the selected rank */ - tmpreg1 &= ~tmpreg2; - - /* Calculate the mask to set */ - tmpreg2 = (uint32_t)ADC_Channel << (5 * (Rank - 13)); - - /* Set the SQx bits for the selected rank */ - tmpreg1 |= tmpreg2; - - /* Store the new register value */ - ADCx->SQR1 = tmpreg1; - } -} - -/** - * @brief Enables the selected ADC software start conversion of the regular channels. - * @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral. - * @retval None - */ -void ADC_SoftwareStartConv(ADC_TypeDef* ADCx) -{ - /* Check the parameters */ - assert_param(IS_ADC_ALL_PERIPH(ADCx)); - - /* Enable the selected ADC conversion for regular group */ - ADCx->CR2 |= (uint32_t)ADC_CR2_SWSTART; -} - -/** - * @brief Gets the selected ADC Software start regular conversion Status. - * @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral. - * @retval The new state of ADC software start conversion (SET or RESET). - */ -FlagStatus ADC_GetSoftwareStartConvStatus(ADC_TypeDef* ADCx) -{ - FlagStatus bitstatus = RESET; - /* Check the parameters */ - assert_param(IS_ADC_ALL_PERIPH(ADCx)); - - /* Check the status of SWSTART bit */ - if ((ADCx->CR2 & ADC_CR2_SWSTART) != (uint32_t)RESET) - { - /* SWSTART bit is set */ - bitstatus = SET; - } - else - { - /* SWSTART bit is reset */ - bitstatus = RESET; - } - - /* Return the SWSTART bit status */ - return bitstatus; -} - - -/** - * @brief Enables or disables the EOC on each regular channel conversion - * @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral. - * @param NewState: new state of the selected ADC EOC flag rising - * This parameter can be: ENABLE or DISABLE. - * @retval None - */ -void ADC_EOCOnEachRegularChannelCmd(ADC_TypeDef* ADCx, FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_ADC_ALL_PERIPH(ADCx)); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - - if (NewState != DISABLE) - { - /* Enable the selected ADC EOC rising on each regular channel conversion */ - ADCx->CR2 |= (uint32_t)ADC_CR2_EOCS; - } - else - { - /* Disable the selected ADC EOC rising on each regular channel conversion */ - ADCx->CR2 &= (uint32_t)(~ADC_CR2_EOCS); - } -} - -/** - * @brief Enables or disables the ADC continuous conversion mode - * @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral. - * @param NewState: new state of the selected ADC continuous conversion mode - * This parameter can be: ENABLE or DISABLE. - * @retval None - */ -void ADC_ContinuousModeCmd(ADC_TypeDef* ADCx, FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_ADC_ALL_PERIPH(ADCx)); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - - if (NewState != DISABLE) - { - /* Enable the selected ADC continuous conversion mode */ - ADCx->CR2 |= (uint32_t)ADC_CR2_CONT; - } - else - { - /* Disable the selected ADC continuous conversion mode */ - ADCx->CR2 &= (uint32_t)(~ADC_CR2_CONT); - } -} - -/** - * @brief Configures the discontinuous mode for the selected ADC regular group - * channel. - * @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral. - * @param Number: specifies the discontinuous mode regular channel count value. - * This number must be between 1 and 8. - * @retval None - */ -void ADC_DiscModeChannelCountConfig(ADC_TypeDef* ADCx, uint8_t Number) -{ - uint32_t tmpreg1 = 0; - uint32_t tmpreg2 = 0; - - /* Check the parameters */ - assert_param(IS_ADC_ALL_PERIPH(ADCx)); - assert_param(IS_ADC_REGULAR_DISC_NUMBER(Number)); - - /* Get the old register value */ - tmpreg1 = ADCx->CR1; - - /* Clear the old discontinuous mode channel count */ - tmpreg1 &= CR1_DISCNUM_RESET; - - /* Set the discontinuous mode channel count */ - tmpreg2 = Number - 1; - tmpreg1 |= tmpreg2 << 13; - - /* Store the new register value */ - ADCx->CR1 = tmpreg1; -} - -/** - * @brief Enables or disables the discontinuous mode on regular group channel - * for the specified ADC - * @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral. - * @param NewState: new state of the selected ADC discontinuous mode on - * regular group channel. - * This parameter can be: ENABLE or DISABLE. - * @retval None - */ -void ADC_DiscModeCmd(ADC_TypeDef* ADCx, FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_ADC_ALL_PERIPH(ADCx)); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - - if (NewState != DISABLE) - { - /* Enable the selected ADC regular discontinuous mode */ - ADCx->CR1 |= (uint32_t)ADC_CR1_DISCEN; - } - else - { - /* Disable the selected ADC regular discontinuous mode */ - ADCx->CR1 &= (uint32_t)(~ADC_CR1_DISCEN); - } -} - -/** - * @brief Returns the last ADCx conversion result data for regular channel. - * @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral. - * @retval The Data conversion value. - */ -uint16_t ADC_GetConversionValue(ADC_TypeDef* ADCx) -{ - /* Check the parameters */ - assert_param(IS_ADC_ALL_PERIPH(ADCx)); - - /* Return the selected ADC conversion value */ - return (uint16_t) ADCx->DR; -} - -/** - * @brief Returns the last ADC1, ADC2 and ADC3 regular conversions results - * data in the selected multi mode. - * @param None - * @retval The Data conversion value. - * @note In dual mode, the value returned by this function is as following - * Data[15:0] : these bits contain the regular data of ADC1. - * Data[31:16]: these bits contain the regular data of ADC2. - * @note In triple mode, the value returned by this function is as following - * Data[15:0] : these bits contain alternatively the regular data of ADC1, ADC3 and ADC2. - * Data[31:16]: these bits contain alternatively the regular data of ADC2, ADC1 and ADC3. - */ -uint32_t ADC_GetMultiModeConversionValue(void) -{ - /* Return the multi mode conversion value */ - return (*(__IO uint32_t *) CDR_ADDRESS); -} -/** - * @} - */ - -/** @defgroup ADC_Group5 Regular Channels DMA Configuration functions - * @brief Regular Channels DMA Configuration functions - * -@verbatim - =============================================================================== - ##### Regular Channels DMA Configuration functions ##### - =============================================================================== - [..] This section provides functions allowing to configure the DMA for ADC - regular channels. - Since converted regular channel values are stored into a unique data - register, it is useful to use DMA for conversion of more than one regular - channel. This avoids the loss of the data already stored in the ADC - Data register. - When the DMA mode is enabled (using the ADC_DMACmd() function), after each - conversion of a regular channel, a DMA request is generated. - [..] Depending on the "DMA disable selection for Independent ADC mode" - configuration (using the ADC_DMARequestAfterLastTransferCmd() function), - at the end of the last DMA transfer, two possibilities are allowed: - (+) No new DMA request is issued to the DMA controller (feature DISABLED) - (+) Requests can continue to be generated (feature ENABLED). - [..] Depending on the "DMA disable selection for multi ADC mode" configuration - (using the void ADC_MultiModeDMARequestAfterLastTransferCmd() function), - at the end of the last DMA transfer, two possibilities are allowed: - (+) No new DMA request is issued to the DMA controller (feature DISABLED) - (+) Requests can continue to be generated (feature ENABLED). - -@endverbatim - * @{ - */ - - /** - * @brief Enables or disables the specified ADC DMA request. - * @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral. - * @param NewState: new state of the selected ADC DMA transfer. - * This parameter can be: ENABLE or DISABLE. - * @retval None - */ -void ADC_DMACmd(ADC_TypeDef* ADCx, FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_ADC_ALL_PERIPH(ADCx)); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - if (NewState != DISABLE) - { - /* Enable the selected ADC DMA request */ - ADCx->CR2 |= (uint32_t)ADC_CR2_DMA; - } - else - { - /* Disable the selected ADC DMA request */ - ADCx->CR2 &= (uint32_t)(~ADC_CR2_DMA); - } -} - -/** - * @brief Enables or disables the ADC DMA request after last transfer (Single-ADC mode) - * @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral. - * @param NewState: new state of the selected ADC DMA request after last transfer. - * This parameter can be: ENABLE or DISABLE. - * @retval None - */ -void ADC_DMARequestAfterLastTransferCmd(ADC_TypeDef* ADCx, FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_ADC_ALL_PERIPH(ADCx)); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - if (NewState != DISABLE) - { - /* Enable the selected ADC DMA request after last transfer */ - ADCx->CR2 |= (uint32_t)ADC_CR2_DDS; - } - else - { - /* Disable the selected ADC DMA request after last transfer */ - ADCx->CR2 &= (uint32_t)(~ADC_CR2_DDS); - } -} - -/** - * @brief Enables or disables the ADC DMA request after last transfer in multi ADC mode - * @param NewState: new state of the selected ADC DMA request after last transfer. - * This parameter can be: ENABLE or DISABLE. - * @note if Enabled, DMA requests are issued as long as data are converted and - * DMA mode for multi ADC mode (selected using ADC_CommonInit() function - * by ADC_CommonInitStruct.ADC_DMAAccessMode structure member) is - * ADC_DMAAccessMode_1, ADC_DMAAccessMode_2 or ADC_DMAAccessMode_3. - * @retval None - */ -void ADC_MultiModeDMARequestAfterLastTransferCmd(FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_FUNCTIONAL_STATE(NewState)); - if (NewState != DISABLE) - { - /* Enable the selected ADC DMA request after last transfer */ - ADC->CCR |= (uint32_t)ADC_CCR_DDS; - } - else - { - /* Disable the selected ADC DMA request after last transfer */ - ADC->CCR &= (uint32_t)(~ADC_CCR_DDS); - } -} -/** - * @} - */ - -/** @defgroup ADC_Group6 Injected channels Configuration functions - * @brief Injected channels Configuration functions - * -@verbatim - =============================================================================== - ##### Injected channels Configuration functions ##### - =============================================================================== - - [..] This section provide functions allowing to configure the ADC Injected channels, - it is composed of 2 sub sections : - - (#) Configuration functions for Injected channels: This subsection provides - functions allowing to configure the ADC injected channels : - (++) Configure the rank in the injected group sequencer for each channel - (++) Configure the sampling time for each channel - (++) Activate the Auto injected Mode - (++) Activate the Discontinuous Mode - (++) scan mode activation - (++) External/software trigger source - (++) External trigger edge - (++) injected channels sequencer. - - (#) Get the Specified Injected channel conversion data: This subsection - provides an important function in the ADC peripheral since it returns the - converted data of the specific injected channel. - -@endverbatim - * @{ - */ -/** - * @brief Configures for the selected ADC injected channel its corresponding - * rank in the sequencer and its sample time. - * @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral. - * @param ADC_Channel: the ADC channel to configure. - * This parameter can be one of the following values: - * @arg ADC_Channel_0: ADC Channel0 selected - * @arg ADC_Channel_1: ADC Channel1 selected - * @arg ADC_Channel_2: ADC Channel2 selected - * @arg ADC_Channel_3: ADC Channel3 selected - * @arg ADC_Channel_4: ADC Channel4 selected - * @arg ADC_Channel_5: ADC Channel5 selected - * @arg ADC_Channel_6: ADC Channel6 selected - * @arg ADC_Channel_7: ADC Channel7 selected - * @arg ADC_Channel_8: ADC Channel8 selected - * @arg ADC_Channel_9: ADC Channel9 selected - * @arg ADC_Channel_10: ADC Channel10 selected - * @arg ADC_Channel_11: ADC Channel11 selected - * @arg ADC_Channel_12: ADC Channel12 selected - * @arg ADC_Channel_13: ADC Channel13 selected - * @arg ADC_Channel_14: ADC Channel14 selected - * @arg ADC_Channel_15: ADC Channel15 selected - * @arg ADC_Channel_16: ADC Channel16 selected - * @arg ADC_Channel_17: ADC Channel17 selected - * @arg ADC_Channel_18: ADC Channel18 selected - * @param Rank: The rank in the injected group sequencer. - * This parameter must be between 1 to 4. - * @param ADC_SampleTime: The sample time value to be set for the selected channel. - * This parameter can be one of the following values: - * @arg ADC_SampleTime_3Cycles: Sample time equal to 3 cycles - * @arg ADC_SampleTime_15Cycles: Sample time equal to 15 cycles - * @arg ADC_SampleTime_28Cycles: Sample time equal to 28 cycles - * @arg ADC_SampleTime_56Cycles: Sample time equal to 56 cycles - * @arg ADC_SampleTime_84Cycles: Sample time equal to 84 cycles - * @arg ADC_SampleTime_112Cycles: Sample time equal to 112 cycles - * @arg ADC_SampleTime_144Cycles: Sample time equal to 144 cycles - * @arg ADC_SampleTime_480Cycles: Sample time equal to 480 cycles - * @retval None - */ -void ADC_InjectedChannelConfig(ADC_TypeDef* ADCx, uint8_t ADC_Channel, uint8_t Rank, uint8_t ADC_SampleTime) -{ - uint32_t tmpreg1 = 0, tmpreg2 = 0, tmpreg3 = 0; - /* Check the parameters */ - assert_param(IS_ADC_ALL_PERIPH(ADCx)); - assert_param(IS_ADC_CHANNEL(ADC_Channel)); - assert_param(IS_ADC_INJECTED_RANK(Rank)); - assert_param(IS_ADC_SAMPLE_TIME(ADC_SampleTime)); - /* if ADC_Channel_10 ... ADC_Channel_18 is selected */ - if (ADC_Channel > ADC_Channel_9) - { - /* Get the old register value */ - tmpreg1 = ADCx->SMPR1; - /* Calculate the mask to clear */ - tmpreg2 = SMPR1_SMP_SET << (3*(ADC_Channel - 10)); - /* Clear the old sample time */ - tmpreg1 &= ~tmpreg2; - /* Calculate the mask to set */ - tmpreg2 = (uint32_t)ADC_SampleTime << (3*(ADC_Channel - 10)); - /* Set the new sample time */ - tmpreg1 |= tmpreg2; - /* Store the new register value */ - ADCx->SMPR1 = tmpreg1; - } - else /* ADC_Channel include in ADC_Channel_[0..9] */ - { - /* Get the old register value */ - tmpreg1 = ADCx->SMPR2; - /* Calculate the mask to clear */ - tmpreg2 = SMPR2_SMP_SET << (3 * ADC_Channel); - /* Clear the old sample time */ - tmpreg1 &= ~tmpreg2; - /* Calculate the mask to set */ - tmpreg2 = (uint32_t)ADC_SampleTime << (3 * ADC_Channel); - /* Set the new sample time */ - tmpreg1 |= tmpreg2; - /* Store the new register value */ - ADCx->SMPR2 = tmpreg1; - } - /* Rank configuration */ - /* Get the old register value */ - tmpreg1 = ADCx->JSQR; - /* Get JL value: Number = JL+1 */ - tmpreg3 = (tmpreg1 & JSQR_JL_SET)>> 20; - /* Calculate the mask to clear: ((Rank-1)+(4-JL-1)) */ - tmpreg2 = JSQR_JSQ_SET << (5 * (uint8_t)((Rank + 3) - (tmpreg3 + 1))); - /* Clear the old JSQx bits for the selected rank */ - tmpreg1 &= ~tmpreg2; - /* Calculate the mask to set: ((Rank-1)+(4-JL-1)) */ - tmpreg2 = (uint32_t)ADC_Channel << (5 * (uint8_t)((Rank + 3) - (tmpreg3 + 1))); - /* Set the JSQx bits for the selected rank */ - tmpreg1 |= tmpreg2; - /* Store the new register value */ - ADCx->JSQR = tmpreg1; -} - -/** - * @brief Configures the sequencer length for injected channels - * @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral. - * @param Length: The sequencer length. - * This parameter must be a number between 1 to 4. - * @retval None - */ -void ADC_InjectedSequencerLengthConfig(ADC_TypeDef* ADCx, uint8_t Length) -{ - uint32_t tmpreg1 = 0; - uint32_t tmpreg2 = 0; - /* Check the parameters */ - assert_param(IS_ADC_ALL_PERIPH(ADCx)); - assert_param(IS_ADC_INJECTED_LENGTH(Length)); - - /* Get the old register value */ - tmpreg1 = ADCx->JSQR; - - /* Clear the old injected sequence length JL bits */ - tmpreg1 &= JSQR_JL_RESET; - - /* Set the injected sequence length JL bits */ - tmpreg2 = Length - 1; - tmpreg1 |= tmpreg2 << 20; - - /* Store the new register value */ - ADCx->JSQR = tmpreg1; -} - -/** - * @brief Set the injected channels conversion value offset - * @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral. - * @param ADC_InjectedChannel: the ADC injected channel to set its offset. - * This parameter can be one of the following values: - * @arg ADC_InjectedChannel_1: Injected Channel1 selected - * @arg ADC_InjectedChannel_2: Injected Channel2 selected - * @arg ADC_InjectedChannel_3: Injected Channel3 selected - * @arg ADC_InjectedChannel_4: Injected Channel4 selected - * @param Offset: the offset value for the selected ADC injected channel - * This parameter must be a 12bit value. - * @retval None - */ -void ADC_SetInjectedOffset(ADC_TypeDef* ADCx, uint8_t ADC_InjectedChannel, uint16_t Offset) -{ - __IO uint32_t tmp = 0; - /* Check the parameters */ - assert_param(IS_ADC_ALL_PERIPH(ADCx)); - assert_param(IS_ADC_INJECTED_CHANNEL(ADC_InjectedChannel)); - assert_param(IS_ADC_OFFSET(Offset)); - - tmp = (uint32_t)ADCx; - tmp += ADC_InjectedChannel; - - /* Set the selected injected channel data offset */ - *(__IO uint32_t *) tmp = (uint32_t)Offset; -} - - /** - * @brief Configures the ADCx external trigger for injected channels conversion. - * @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral. - * @param ADC_ExternalTrigInjecConv: specifies the ADC trigger to start injected conversion. - * This parameter can be one of the following values: - * @arg ADC_ExternalTrigInjecConv_T1_CC4: Timer1 capture compare4 selected - * @arg ADC_ExternalTrigInjecConv_T1_TRGO: Timer1 TRGO event selected - * @arg ADC_ExternalTrigInjecConv_T2_CC1: Timer2 capture compare1 selected - * @arg ADC_ExternalTrigInjecConv_T2_TRGO: Timer2 TRGO event selected - * @arg ADC_ExternalTrigInjecConv_T3_CC2: Timer3 capture compare2 selected - * @arg ADC_ExternalTrigInjecConv_T3_CC4: Timer3 capture compare4 selected - * @arg ADC_ExternalTrigInjecConv_T4_CC1: Timer4 capture compare1 selected - * @arg ADC_ExternalTrigInjecConv_T4_CC2: Timer4 capture compare2 selected - * @arg ADC_ExternalTrigInjecConv_T4_CC3: Timer4 capture compare3 selected - * @arg ADC_ExternalTrigInjecConv_T4_TRGO: Timer4 TRGO event selected - * @arg ADC_ExternalTrigInjecConv_T5_CC4: Timer5 capture compare4 selected - * @arg ADC_ExternalTrigInjecConv_T5_TRGO: Timer5 TRGO event selected - * @arg ADC_ExternalTrigInjecConv_T8_CC2: Timer8 capture compare2 selected - * @arg ADC_ExternalTrigInjecConv_T8_CC3: Timer8 capture compare3 selected - * @arg ADC_ExternalTrigInjecConv_T8_CC4: Timer8 capture compare4 selected - * @arg ADC_ExternalTrigInjecConv_Ext_IT15: External interrupt line 15 event selected - * @retval None - */ -void ADC_ExternalTrigInjectedConvConfig(ADC_TypeDef* ADCx, uint32_t ADC_ExternalTrigInjecConv) -{ - uint32_t tmpreg = 0; - /* Check the parameters */ - assert_param(IS_ADC_ALL_PERIPH(ADCx)); - assert_param(IS_ADC_EXT_INJEC_TRIG(ADC_ExternalTrigInjecConv)); - - /* Get the old register value */ - tmpreg = ADCx->CR2; - - /* Clear the old external event selection for injected group */ - tmpreg &= CR2_JEXTSEL_RESET; - - /* Set the external event selection for injected group */ - tmpreg |= ADC_ExternalTrigInjecConv; - - /* Store the new register value */ - ADCx->CR2 = tmpreg; -} - -/** - * @brief Configures the ADCx external trigger edge for injected channels conversion. - * @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral. - * @param ADC_ExternalTrigInjecConvEdge: specifies the ADC external trigger edge - * to start injected conversion. - * This parameter can be one of the following values: - * @arg ADC_ExternalTrigInjecConvEdge_None: external trigger disabled for - * injected conversion - * @arg ADC_ExternalTrigInjecConvEdge_Rising: detection on rising edge - * @arg ADC_ExternalTrigInjecConvEdge_Falling: detection on falling edge - * @arg ADC_ExternalTrigInjecConvEdge_RisingFalling: detection on both rising - * and falling edge - * @retval None - */ -void ADC_ExternalTrigInjectedConvEdgeConfig(ADC_TypeDef* ADCx, uint32_t ADC_ExternalTrigInjecConvEdge) -{ - uint32_t tmpreg = 0; - /* Check the parameters */ - assert_param(IS_ADC_ALL_PERIPH(ADCx)); - assert_param(IS_ADC_EXT_INJEC_TRIG_EDGE(ADC_ExternalTrigInjecConvEdge)); - /* Get the old register value */ - tmpreg = ADCx->CR2; - /* Clear the old external trigger edge for injected group */ - tmpreg &= CR2_JEXTEN_RESET; - /* Set the new external trigger edge for injected group */ - tmpreg |= ADC_ExternalTrigInjecConvEdge; - /* Store the new register value */ - ADCx->CR2 = tmpreg; -} - -/** - * @brief Enables the selected ADC software start conversion of the injected channels. - * @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral. - * @retval None - */ -void ADC_SoftwareStartInjectedConv(ADC_TypeDef* ADCx) -{ - /* Check the parameters */ - assert_param(IS_ADC_ALL_PERIPH(ADCx)); - /* Enable the selected ADC conversion for injected group */ - ADCx->CR2 |= (uint32_t)ADC_CR2_JSWSTART; -} - -/** - * @brief Gets the selected ADC Software start injected conversion Status. - * @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral. - * @retval The new state of ADC software start injected conversion (SET or RESET). - */ -FlagStatus ADC_GetSoftwareStartInjectedConvCmdStatus(ADC_TypeDef* ADCx) -{ - FlagStatus bitstatus = RESET; - /* Check the parameters */ - assert_param(IS_ADC_ALL_PERIPH(ADCx)); - - /* Check the status of JSWSTART bit */ - if ((ADCx->CR2 & ADC_CR2_JSWSTART) != (uint32_t)RESET) - { - /* JSWSTART bit is set */ - bitstatus = SET; - } - else - { - /* JSWSTART bit is reset */ - bitstatus = RESET; - } - /* Return the JSWSTART bit status */ - return bitstatus; -} - -/** - * @brief Enables or disables the selected ADC automatic injected group - * conversion after regular one. - * @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral. - * @param NewState: new state of the selected ADC auto injected conversion - * This parameter can be: ENABLE or DISABLE. - * @retval None - */ -void ADC_AutoInjectedConvCmd(ADC_TypeDef* ADCx, FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_ADC_ALL_PERIPH(ADCx)); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - if (NewState != DISABLE) - { - /* Enable the selected ADC automatic injected group conversion */ - ADCx->CR1 |= (uint32_t)ADC_CR1_JAUTO; - } - else - { - /* Disable the selected ADC automatic injected group conversion */ - ADCx->CR1 &= (uint32_t)(~ADC_CR1_JAUTO); - } -} - -/** - * @brief Enables or disables the discontinuous mode for injected group - * channel for the specified ADC - * @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral. - * @param NewState: new state of the selected ADC discontinuous mode on injected - * group channel. - * This parameter can be: ENABLE or DISABLE. - * @retval None - */ -void ADC_InjectedDiscModeCmd(ADC_TypeDef* ADCx, FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_ADC_ALL_PERIPH(ADCx)); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - if (NewState != DISABLE) - { - /* Enable the selected ADC injected discontinuous mode */ - ADCx->CR1 |= (uint32_t)ADC_CR1_JDISCEN; - } - else - { - /* Disable the selected ADC injected discontinuous mode */ - ADCx->CR1 &= (uint32_t)(~ADC_CR1_JDISCEN); - } -} - -/** - * @brief Returns the ADC injected channel conversion result - * @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral. - * @param ADC_InjectedChannel: the converted ADC injected channel. - * This parameter can be one of the following values: - * @arg ADC_InjectedChannel_1: Injected Channel1 selected - * @arg ADC_InjectedChannel_2: Injected Channel2 selected - * @arg ADC_InjectedChannel_3: Injected Channel3 selected - * @arg ADC_InjectedChannel_4: Injected Channel4 selected - * @retval The Data conversion value. - */ -uint16_t ADC_GetInjectedConversionValue(ADC_TypeDef* ADCx, uint8_t ADC_InjectedChannel) -{ - __IO uint32_t tmp = 0; - - /* Check the parameters */ - assert_param(IS_ADC_ALL_PERIPH(ADCx)); - assert_param(IS_ADC_INJECTED_CHANNEL(ADC_InjectedChannel)); - - tmp = (uint32_t)ADCx; - tmp += ADC_InjectedChannel + JDR_OFFSET; - - /* Returns the selected injected channel conversion data value */ - return (uint16_t) (*(__IO uint32_t*) tmp); -} -/** - * @} - */ - -/** @defgroup ADC_Group7 Interrupts and flags management functions - * @brief Interrupts and flags management functions - * -@verbatim - =============================================================================== - ##### Interrupts and flags management functions ##### - =============================================================================== - - [..] This section provides functions allowing to configure the ADC Interrupts - and to get the status and clear flags and Interrupts pending bits. - - [..] Each ADC provides 4 Interrupts sources and 6 Flags which can be divided - into 3 groups: - - *** Flags and Interrupts for ADC regular channels *** - ===================================================== - [..] - (+) Flags : - (##) ADC_FLAG_OVR : Overrun detection when regular converted data are lost - - (##) ADC_FLAG_EOC : Regular channel end of conversion ==> to indicate - (depending on EOCS bit, managed by ADC_EOCOnEachRegularChannelCmd() ) - the end of: - (+++) a regular CHANNEL conversion - (+++) sequence of regular GROUP conversions . - - (##) ADC_FLAG_STRT: Regular channel start ==> to indicate when regular - CHANNEL conversion starts. - [..] - (+) Interrupts : - (##) ADC_IT_OVR : specifies the interrupt source for Overrun detection - event. - (##) ADC_IT_EOC : specifies the interrupt source for Regular channel end - of conversion event. - - - *** Flags and Interrupts for ADC Injected channels *** - ====================================================== - [..] - (+) Flags : - (##) ADC_FLAG_JEOC : Injected channel end of conversion ==> to indicate - at the end of injected GROUP conversion - - (##) ADC_FLAG_JSTRT: Injected channel start ==> to indicate hardware when - injected GROUP conversion starts. - [..] - (+) Interrupts : - (##) ADC_IT_JEOC : specifies the interrupt source for Injected channel - end of conversion event. - - *** General Flags and Interrupts for the ADC *** - ================================================ - [..] - (+)Flags : - (##) ADC_FLAG_AWD: Analog watchdog ==> to indicate if the converted voltage - crosses the programmed thresholds values. - [..] - (+) Interrupts : - (##) ADC_IT_AWD : specifies the interrupt source for Analog watchdog event. - - - [..] The user should identify which mode will be used in his application to - manage the ADC controller events: Polling mode or Interrupt mode. - - [..] In the Polling Mode it is advised to use the following functions: - (+) ADC_GetFlagStatus() : to check if flags events occur. - (+) ADC_ClearFlag() : to clear the flags events. - - [..] In the Interrupt Mode it is advised to use the following functions: - (+) ADC_ITConfig() : to enable or disable the interrupt source. - (+) ADC_GetITStatus() : to check if Interrupt occurs. - (+) ADC_ClearITPendingBit() : to clear the Interrupt pending Bit - (corresponding Flag). -@endverbatim - * @{ - */ -/** - * @brief Enables or disables the specified ADC interrupts. - * @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral. - * @param ADC_IT: specifies the ADC interrupt sources to be enabled or disabled. - * This parameter can be one of the following values: - * @arg ADC_IT_EOC: End of conversion interrupt mask - * @arg ADC_IT_AWD: Analog watchdog interrupt mask - * @arg ADC_IT_JEOC: End of injected conversion interrupt mask - * @arg ADC_IT_OVR: Overrun interrupt enable - * @param NewState: new state of the specified ADC interrupts. - * This parameter can be: ENABLE or DISABLE. - * @retval None - */ -void ADC_ITConfig(ADC_TypeDef* ADCx, uint16_t ADC_IT, FunctionalState NewState) -{ - uint32_t itmask = 0; - /* Check the parameters */ - assert_param(IS_ADC_ALL_PERIPH(ADCx)); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - assert_param(IS_ADC_IT(ADC_IT)); - - /* Get the ADC IT index */ - itmask = (uint8_t)ADC_IT; - itmask = (uint32_t)0x01 << itmask; - - if (NewState != DISABLE) - { - /* Enable the selected ADC interrupts */ - ADCx->CR1 |= itmask; - } - else - { - /* Disable the selected ADC interrupts */ - ADCx->CR1 &= (~(uint32_t)itmask); - } -} - -/** - * @brief Checks whether the specified ADC flag is set or not. - * @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral. - * @param ADC_FLAG: specifies the flag to check. - * This parameter can be one of the following values: - * @arg ADC_FLAG_AWD: Analog watchdog flag - * @arg ADC_FLAG_EOC: End of conversion flag - * @arg ADC_FLAG_JEOC: End of injected group conversion flag - * @arg ADC_FLAG_JSTRT: Start of injected group conversion flag - * @arg ADC_FLAG_STRT: Start of regular group conversion flag - * @arg ADC_FLAG_OVR: Overrun flag - * @retval The new state of ADC_FLAG (SET or RESET). - */ -FlagStatus ADC_GetFlagStatus(ADC_TypeDef* ADCx, uint8_t ADC_FLAG) -{ - FlagStatus bitstatus = RESET; - /* Check the parameters */ - assert_param(IS_ADC_ALL_PERIPH(ADCx)); - assert_param(IS_ADC_GET_FLAG(ADC_FLAG)); - - /* Check the status of the specified ADC flag */ - if ((ADCx->SR & ADC_FLAG) != (uint8_t)RESET) - { - /* ADC_FLAG is set */ - bitstatus = SET; - } - else - { - /* ADC_FLAG is reset */ - bitstatus = RESET; - } - /* Return the ADC_FLAG status */ - return bitstatus; -} - -/** - * @brief Clears the ADCx's pending flags. - * @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral. - * @param ADC_FLAG: specifies the flag to clear. - * This parameter can be any combination of the following values: - * @arg ADC_FLAG_AWD: Analog watchdog flag - * @arg ADC_FLAG_EOC: End of conversion flag - * @arg ADC_FLAG_JEOC: End of injected group conversion flag - * @arg ADC_FLAG_JSTRT: Start of injected group conversion flag - * @arg ADC_FLAG_STRT: Start of regular group conversion flag - * @arg ADC_FLAG_OVR: Overrun flag - * @retval None - */ -void ADC_ClearFlag(ADC_TypeDef* ADCx, uint8_t ADC_FLAG) -{ - /* Check the parameters */ - assert_param(IS_ADC_ALL_PERIPH(ADCx)); - assert_param(IS_ADC_CLEAR_FLAG(ADC_FLAG)); - - /* Clear the selected ADC flags */ - ADCx->SR = ~(uint32_t)ADC_FLAG; -} - -/** - * @brief Checks whether the specified ADC interrupt has occurred or not. - * @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral. - * @param ADC_IT: specifies the ADC interrupt source to check. - * This parameter can be one of the following values: - * @arg ADC_IT_EOC: End of conversion interrupt mask - * @arg ADC_IT_AWD: Analog watchdog interrupt mask - * @arg ADC_IT_JEOC: End of injected conversion interrupt mask - * @arg ADC_IT_OVR: Overrun interrupt mask - * @retval The new state of ADC_IT (SET or RESET). - */ -ITStatus ADC_GetITStatus(ADC_TypeDef* ADCx, uint16_t ADC_IT) -{ - ITStatus bitstatus = RESET; - uint32_t itmask = 0, enablestatus = 0; - - /* Check the parameters */ - assert_param(IS_ADC_ALL_PERIPH(ADCx)); - assert_param(IS_ADC_IT(ADC_IT)); - - /* Get the ADC IT index */ - itmask = ADC_IT >> 8; - - /* Get the ADC_IT enable bit status */ - enablestatus = (ADCx->CR1 & ((uint32_t)0x01 << (uint8_t)ADC_IT)) ; - - /* Check the status of the specified ADC interrupt */ - if (((ADCx->SR & itmask) != (uint32_t)RESET) && enablestatus) - { - /* ADC_IT is set */ - bitstatus = SET; - } - else - { - /* ADC_IT is reset */ - bitstatus = RESET; - } - /* Return the ADC_IT status */ - return bitstatus; -} - -/** - * @brief Clears the ADCx's interrupt pending bits. - * @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral. - * @param ADC_IT: specifies the ADC interrupt pending bit to clear. - * This parameter can be one of the following values: - * @arg ADC_IT_EOC: End of conversion interrupt mask - * @arg ADC_IT_AWD: Analog watchdog interrupt mask - * @arg ADC_IT_JEOC: End of injected conversion interrupt mask - * @arg ADC_IT_OVR: Overrun interrupt mask - * @retval None - */ -void ADC_ClearITPendingBit(ADC_TypeDef* ADCx, uint16_t ADC_IT) -{ - uint8_t itmask = 0; - /* Check the parameters */ - assert_param(IS_ADC_ALL_PERIPH(ADCx)); - assert_param(IS_ADC_IT(ADC_IT)); - /* Get the ADC IT index */ - itmask = (uint8_t)(ADC_IT >> 8); - /* Clear the selected ADC interrupt pending bits */ - ADCx->SR = ~(uint32_t)itmask; -} -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/stm/lib/stm32f4xx_adc.h b/stm/lib/stm32f4xx_adc.h deleted file mode 100644 index 9f5fe7acc..000000000 --- a/stm/lib/stm32f4xx_adc.h +++ /dev/null @@ -1,656 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f4xx_adc.h - * @author MCD Application Team - * @version V1.3.0 - * @date 08-November-2013 - * @brief This file contains all the functions prototypes for the ADC firmware - * library. - ****************************************************************************** - * @attention - * - *

© COPYRIGHT 2013 STMicroelectronics

- * - * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License"); - * You may not use this file except in compliance with the License. - * You may obtain a copy of the License at: - * - * http://www.st.com/software_license_agreement_liberty_v2 - * - * Unless required by applicable law or agreed to in writing, software - * distributed under the License is distributed on an "AS IS" BASIS, - * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - * See the License for the specific language governing permissions and - * limitations under the License. - * - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F4xx_ADC_H -#define __STM32F4xx_ADC_H - -#ifdef __cplusplus - extern "C" { -#endif - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx.h" - -/** @addtogroup STM32F4xx_StdPeriph_Driver - * @{ - */ - -/** @addtogroup ADC - * @{ - */ - -/* Exported types ------------------------------------------------------------*/ - -/** - * @brief ADC Init structure definition - */ -typedef struct -{ - uint32_t ADC_Resolution; /*!< Configures the ADC resolution dual mode. - This parameter can be a value of @ref ADC_resolution */ - FunctionalState ADC_ScanConvMode; /*!< Specifies whether the conversion - is performed in Scan (multichannels) - or Single (one channel) mode. - This parameter can be set to ENABLE or DISABLE */ - FunctionalState ADC_ContinuousConvMode; /*!< Specifies whether the conversion - is performed in Continuous or Single mode. - This parameter can be set to ENABLE or DISABLE. */ - uint32_t ADC_ExternalTrigConvEdge; /*!< Select the external trigger edge and - enable the trigger of a regular group. - This parameter can be a value of - @ref ADC_external_trigger_edge_for_regular_channels_conversion */ - uint32_t ADC_ExternalTrigConv; /*!< Select the external event used to trigger - the start of conversion of a regular group. - This parameter can be a value of - @ref ADC_extrenal_trigger_sources_for_regular_channels_conversion */ - uint32_t ADC_DataAlign; /*!< Specifies whether the ADC data alignment - is left or right. This parameter can be - a value of @ref ADC_data_align */ - uint8_t ADC_NbrOfConversion; /*!< Specifies the number of ADC conversions - that will be done using the sequencer for - regular channel group. - This parameter must range from 1 to 16. */ -}ADC_InitTypeDef; - -/** - * @brief ADC Common Init structure definition - */ -typedef struct -{ - uint32_t ADC_Mode; /*!< Configures the ADC to operate in - independent or multi mode. - This parameter can be a value of @ref ADC_Common_mode */ - uint32_t ADC_Prescaler; /*!< Select the frequency of the clock - to the ADC. The clock is common for all the ADCs. - This parameter can be a value of @ref ADC_Prescaler */ - uint32_t ADC_DMAAccessMode; /*!< Configures the Direct memory access - mode for multi ADC mode. - This parameter can be a value of - @ref ADC_Direct_memory_access_mode_for_multi_mode */ - uint32_t ADC_TwoSamplingDelay; /*!< Configures the Delay between 2 sampling phases. - This parameter can be a value of - @ref ADC_delay_between_2_sampling_phases */ - -}ADC_CommonInitTypeDef; - - -/* Exported constants --------------------------------------------------------*/ - -/** @defgroup ADC_Exported_Constants - * @{ - */ -#define IS_ADC_ALL_PERIPH(PERIPH) (((PERIPH) == ADC1) || \ - ((PERIPH) == ADC2) || \ - ((PERIPH) == ADC3)) - -/** @defgroup ADC_Common_mode - * @{ - */ -#define ADC_Mode_Independent ((uint32_t)0x00000000) -#define ADC_DualMode_RegSimult_InjecSimult ((uint32_t)0x00000001) -#define ADC_DualMode_RegSimult_AlterTrig ((uint32_t)0x00000002) -#define ADC_DualMode_InjecSimult ((uint32_t)0x00000005) -#define ADC_DualMode_RegSimult ((uint32_t)0x00000006) -#define ADC_DualMode_Interl ((uint32_t)0x00000007) -#define ADC_DualMode_AlterTrig ((uint32_t)0x00000009) -#define ADC_TripleMode_RegSimult_InjecSimult ((uint32_t)0x00000011) -#define ADC_TripleMode_RegSimult_AlterTrig ((uint32_t)0x00000012) -#define ADC_TripleMode_InjecSimult ((uint32_t)0x00000015) -#define ADC_TripleMode_RegSimult ((uint32_t)0x00000016) -#define ADC_TripleMode_Interl ((uint32_t)0x00000017) -#define ADC_TripleMode_AlterTrig ((uint32_t)0x00000019) -#define IS_ADC_MODE(MODE) (((MODE) == ADC_Mode_Independent) || \ - ((MODE) == ADC_DualMode_RegSimult_InjecSimult) || \ - ((MODE) == ADC_DualMode_RegSimult_AlterTrig) || \ - ((MODE) == ADC_DualMode_InjecSimult) || \ - ((MODE) == ADC_DualMode_RegSimult) || \ - ((MODE) == ADC_DualMode_Interl) || \ - ((MODE) == ADC_DualMode_AlterTrig) || \ - ((MODE) == ADC_TripleMode_RegSimult_InjecSimult) || \ - ((MODE) == ADC_TripleMode_RegSimult_AlterTrig) || \ - ((MODE) == ADC_TripleMode_InjecSimult) || \ - ((MODE) == ADC_TripleMode_RegSimult) || \ - ((MODE) == ADC_TripleMode_Interl) || \ - ((MODE) == ADC_TripleMode_AlterTrig)) -/** - * @} - */ - - -/** @defgroup ADC_Prescaler - * @{ - */ -#define ADC_Prescaler_Div2 ((uint32_t)0x00000000) -#define ADC_Prescaler_Div4 ((uint32_t)0x00010000) -#define ADC_Prescaler_Div6 ((uint32_t)0x00020000) -#define ADC_Prescaler_Div8 ((uint32_t)0x00030000) -#define IS_ADC_PRESCALER(PRESCALER) (((PRESCALER) == ADC_Prescaler_Div2) || \ - ((PRESCALER) == ADC_Prescaler_Div4) || \ - ((PRESCALER) == ADC_Prescaler_Div6) || \ - ((PRESCALER) == ADC_Prescaler_Div8)) -/** - * @} - */ - - -/** @defgroup ADC_Direct_memory_access_mode_for_multi_mode - * @{ - */ -#define ADC_DMAAccessMode_Disabled ((uint32_t)0x00000000) /* DMA mode disabled */ -#define ADC_DMAAccessMode_1 ((uint32_t)0x00004000) /* DMA mode 1 enabled (2 / 3 half-words one by one - 1 then 2 then 3)*/ -#define ADC_DMAAccessMode_2 ((uint32_t)0x00008000) /* DMA mode 2 enabled (2 / 3 half-words by pairs - 2&1 then 1&3 then 3&2)*/ -#define ADC_DMAAccessMode_3 ((uint32_t)0x0000C000) /* DMA mode 3 enabled (2 / 3 bytes by pairs - 2&1 then 1&3 then 3&2) */ -#define IS_ADC_DMA_ACCESS_MODE(MODE) (((MODE) == ADC_DMAAccessMode_Disabled) || \ - ((MODE) == ADC_DMAAccessMode_1) || \ - ((MODE) == ADC_DMAAccessMode_2) || \ - ((MODE) == ADC_DMAAccessMode_3)) - -/** - * @} - */ - - -/** @defgroup ADC_delay_between_2_sampling_phases - * @{ - */ -#define ADC_TwoSamplingDelay_5Cycles ((uint32_t)0x00000000) -#define ADC_TwoSamplingDelay_6Cycles ((uint32_t)0x00000100) -#define ADC_TwoSamplingDelay_7Cycles ((uint32_t)0x00000200) -#define ADC_TwoSamplingDelay_8Cycles ((uint32_t)0x00000300) -#define ADC_TwoSamplingDelay_9Cycles ((uint32_t)0x00000400) -#define ADC_TwoSamplingDelay_10Cycles ((uint32_t)0x00000500) -#define ADC_TwoSamplingDelay_11Cycles ((uint32_t)0x00000600) -#define ADC_TwoSamplingDelay_12Cycles ((uint32_t)0x00000700) -#define ADC_TwoSamplingDelay_13Cycles ((uint32_t)0x00000800) -#define ADC_TwoSamplingDelay_14Cycles ((uint32_t)0x00000900) -#define ADC_TwoSamplingDelay_15Cycles ((uint32_t)0x00000A00) -#define ADC_TwoSamplingDelay_16Cycles ((uint32_t)0x00000B00) -#define ADC_TwoSamplingDelay_17Cycles ((uint32_t)0x00000C00) -#define ADC_TwoSamplingDelay_18Cycles ((uint32_t)0x00000D00) -#define ADC_TwoSamplingDelay_19Cycles ((uint32_t)0x00000E00) -#define ADC_TwoSamplingDelay_20Cycles ((uint32_t)0x00000F00) -#define IS_ADC_SAMPLING_DELAY(DELAY) (((DELAY) == ADC_TwoSamplingDelay_5Cycles) || \ - ((DELAY) == ADC_TwoSamplingDelay_6Cycles) || \ - ((DELAY) == ADC_TwoSamplingDelay_7Cycles) || \ - ((DELAY) == ADC_TwoSamplingDelay_8Cycles) || \ - ((DELAY) == ADC_TwoSamplingDelay_9Cycles) || \ - ((DELAY) == ADC_TwoSamplingDelay_10Cycles) || \ - ((DELAY) == ADC_TwoSamplingDelay_11Cycles) || \ - ((DELAY) == ADC_TwoSamplingDelay_12Cycles) || \ - ((DELAY) == ADC_TwoSamplingDelay_13Cycles) || \ - ((DELAY) == ADC_TwoSamplingDelay_14Cycles) || \ - ((DELAY) == ADC_TwoSamplingDelay_15Cycles) || \ - ((DELAY) == ADC_TwoSamplingDelay_16Cycles) || \ - ((DELAY) == ADC_TwoSamplingDelay_17Cycles) || \ - ((DELAY) == ADC_TwoSamplingDelay_18Cycles) || \ - ((DELAY) == ADC_TwoSamplingDelay_19Cycles) || \ - ((DELAY) == ADC_TwoSamplingDelay_20Cycles)) - -/** - * @} - */ - - -/** @defgroup ADC_resolution - * @{ - */ -#define ADC_Resolution_12b ((uint32_t)0x00000000) -#define ADC_Resolution_10b ((uint32_t)0x01000000) -#define ADC_Resolution_8b ((uint32_t)0x02000000) -#define ADC_Resolution_6b ((uint32_t)0x03000000) -#define IS_ADC_RESOLUTION(RESOLUTION) (((RESOLUTION) == ADC_Resolution_12b) || \ - ((RESOLUTION) == ADC_Resolution_10b) || \ - ((RESOLUTION) == ADC_Resolution_8b) || \ - ((RESOLUTION) == ADC_Resolution_6b)) - -/** - * @} - */ - - -/** @defgroup ADC_external_trigger_edge_for_regular_channels_conversion - * @{ - */ -#define ADC_ExternalTrigConvEdge_None ((uint32_t)0x00000000) -#define ADC_ExternalTrigConvEdge_Rising ((uint32_t)0x10000000) -#define ADC_ExternalTrigConvEdge_Falling ((uint32_t)0x20000000) -#define ADC_ExternalTrigConvEdge_RisingFalling ((uint32_t)0x30000000) -#define IS_ADC_EXT_TRIG_EDGE(EDGE) (((EDGE) == ADC_ExternalTrigConvEdge_None) || \ - ((EDGE) == ADC_ExternalTrigConvEdge_Rising) || \ - ((EDGE) == ADC_ExternalTrigConvEdge_Falling) || \ - ((EDGE) == ADC_ExternalTrigConvEdge_RisingFalling)) -/** - * @} - */ - - -/** @defgroup ADC_extrenal_trigger_sources_for_regular_channels_conversion - * @{ - */ -#define ADC_ExternalTrigConv_T1_CC1 ((uint32_t)0x00000000) -#define ADC_ExternalTrigConv_T1_CC2 ((uint32_t)0x01000000) -#define ADC_ExternalTrigConv_T1_CC3 ((uint32_t)0x02000000) -#define ADC_ExternalTrigConv_T2_CC2 ((uint32_t)0x03000000) -#define ADC_ExternalTrigConv_T2_CC3 ((uint32_t)0x04000000) -#define ADC_ExternalTrigConv_T2_CC4 ((uint32_t)0x05000000) -#define ADC_ExternalTrigConv_T2_TRGO ((uint32_t)0x06000000) -#define ADC_ExternalTrigConv_T3_CC1 ((uint32_t)0x07000000) -#define ADC_ExternalTrigConv_T3_TRGO ((uint32_t)0x08000000) -#define ADC_ExternalTrigConv_T4_CC4 ((uint32_t)0x09000000) -#define ADC_ExternalTrigConv_T5_CC1 ((uint32_t)0x0A000000) -#define ADC_ExternalTrigConv_T5_CC2 ((uint32_t)0x0B000000) -#define ADC_ExternalTrigConv_T5_CC3 ((uint32_t)0x0C000000) -#define ADC_ExternalTrigConv_T8_CC1 ((uint32_t)0x0D000000) -#define ADC_ExternalTrigConv_T8_TRGO ((uint32_t)0x0E000000) -#define ADC_ExternalTrigConv_Ext_IT11 ((uint32_t)0x0F000000) -#define IS_ADC_EXT_TRIG(REGTRIG) (((REGTRIG) == ADC_ExternalTrigConv_T1_CC1) || \ - ((REGTRIG) == ADC_ExternalTrigConv_T1_CC2) || \ - ((REGTRIG) == ADC_ExternalTrigConv_T1_CC3) || \ - ((REGTRIG) == ADC_ExternalTrigConv_T2_CC2) || \ - ((REGTRIG) == ADC_ExternalTrigConv_T2_CC3) || \ - ((REGTRIG) == ADC_ExternalTrigConv_T2_CC4) || \ - ((REGTRIG) == ADC_ExternalTrigConv_T2_TRGO) || \ - ((REGTRIG) == ADC_ExternalTrigConv_T3_CC1) || \ - ((REGTRIG) == ADC_ExternalTrigConv_T3_TRGO) || \ - ((REGTRIG) == ADC_ExternalTrigConv_T4_CC4) || \ - ((REGTRIG) == ADC_ExternalTrigConv_T5_CC1) || \ - ((REGTRIG) == ADC_ExternalTrigConv_T5_CC2) || \ - ((REGTRIG) == ADC_ExternalTrigConv_T5_CC3) || \ - ((REGTRIG) == ADC_ExternalTrigConv_T8_CC1) || \ - ((REGTRIG) == ADC_ExternalTrigConv_T8_TRGO) || \ - ((REGTRIG) == ADC_ExternalTrigConv_Ext_IT11)) -/** - * @} - */ - - -/** @defgroup ADC_data_align - * @{ - */ -#define ADC_DataAlign_Right ((uint32_t)0x00000000) -#define ADC_DataAlign_Left ((uint32_t)0x00000800) -#define IS_ADC_DATA_ALIGN(ALIGN) (((ALIGN) == ADC_DataAlign_Right) || \ - ((ALIGN) == ADC_DataAlign_Left)) -/** - * @} - */ - - -/** @defgroup ADC_channels - * @{ - */ -#define ADC_Channel_0 ((uint8_t)0x00) -#define ADC_Channel_1 ((uint8_t)0x01) -#define ADC_Channel_2 ((uint8_t)0x02) -#define ADC_Channel_3 ((uint8_t)0x03) -#define ADC_Channel_4 ((uint8_t)0x04) -#define ADC_Channel_5 ((uint8_t)0x05) -#define ADC_Channel_6 ((uint8_t)0x06) -#define ADC_Channel_7 ((uint8_t)0x07) -#define ADC_Channel_8 ((uint8_t)0x08) -#define ADC_Channel_9 ((uint8_t)0x09) -#define ADC_Channel_10 ((uint8_t)0x0A) -#define ADC_Channel_11 ((uint8_t)0x0B) -#define ADC_Channel_12 ((uint8_t)0x0C) -#define ADC_Channel_13 ((uint8_t)0x0D) -#define ADC_Channel_14 ((uint8_t)0x0E) -#define ADC_Channel_15 ((uint8_t)0x0F) -#define ADC_Channel_16 ((uint8_t)0x10) -#define ADC_Channel_17 ((uint8_t)0x11) -#define ADC_Channel_18 ((uint8_t)0x12) - -#if defined (STM32F40_41xxx) -#define ADC_Channel_TempSensor ((uint8_t)ADC_Channel_16) -#endif /* STM32F40_41xxx */ - -#if defined (STM32F427_437xx) || defined (STM32F429_439xx) || defined (STM32F401xx) -#define ADC_Channel_TempSensor ((uint8_t)ADC_Channel_18) -#endif /* STM32F427_437xx || STM32F429_439xx || STM32F401xx */ - -#define ADC_Channel_Vrefint ((uint8_t)ADC_Channel_17) -#define ADC_Channel_Vbat ((uint8_t)ADC_Channel_18) - -#define IS_ADC_CHANNEL(CHANNEL) (((CHANNEL) == ADC_Channel_0) || \ - ((CHANNEL) == ADC_Channel_1) || \ - ((CHANNEL) == ADC_Channel_2) || \ - ((CHANNEL) == ADC_Channel_3) || \ - ((CHANNEL) == ADC_Channel_4) || \ - ((CHANNEL) == ADC_Channel_5) || \ - ((CHANNEL) == ADC_Channel_6) || \ - ((CHANNEL) == ADC_Channel_7) || \ - ((CHANNEL) == ADC_Channel_8) || \ - ((CHANNEL) == ADC_Channel_9) || \ - ((CHANNEL) == ADC_Channel_10) || \ - ((CHANNEL) == ADC_Channel_11) || \ - ((CHANNEL) == ADC_Channel_12) || \ - ((CHANNEL) == ADC_Channel_13) || \ - ((CHANNEL) == ADC_Channel_14) || \ - ((CHANNEL) == ADC_Channel_15) || \ - ((CHANNEL) == ADC_Channel_16) || \ - ((CHANNEL) == ADC_Channel_17) || \ - ((CHANNEL) == ADC_Channel_18)) -/** - * @} - */ - - -/** @defgroup ADC_sampling_times - * @{ - */ -#define ADC_SampleTime_3Cycles ((uint8_t)0x00) -#define ADC_SampleTime_15Cycles ((uint8_t)0x01) -#define ADC_SampleTime_28Cycles ((uint8_t)0x02) -#define ADC_SampleTime_56Cycles ((uint8_t)0x03) -#define ADC_SampleTime_84Cycles ((uint8_t)0x04) -#define ADC_SampleTime_112Cycles ((uint8_t)0x05) -#define ADC_SampleTime_144Cycles ((uint8_t)0x06) -#define ADC_SampleTime_480Cycles ((uint8_t)0x07) -#define IS_ADC_SAMPLE_TIME(TIME) (((TIME) == ADC_SampleTime_3Cycles) || \ - ((TIME) == ADC_SampleTime_15Cycles) || \ - ((TIME) == ADC_SampleTime_28Cycles) || \ - ((TIME) == ADC_SampleTime_56Cycles) || \ - ((TIME) == ADC_SampleTime_84Cycles) || \ - ((TIME) == ADC_SampleTime_112Cycles) || \ - ((TIME) == ADC_SampleTime_144Cycles) || \ - ((TIME) == ADC_SampleTime_480Cycles)) -/** - * @} - */ - - -/** @defgroup ADC_external_trigger_edge_for_injected_channels_conversion - * @{ - */ -#define ADC_ExternalTrigInjecConvEdge_None ((uint32_t)0x00000000) -#define ADC_ExternalTrigInjecConvEdge_Rising ((uint32_t)0x00100000) -#define ADC_ExternalTrigInjecConvEdge_Falling ((uint32_t)0x00200000) -#define ADC_ExternalTrigInjecConvEdge_RisingFalling ((uint32_t)0x00300000) -#define IS_ADC_EXT_INJEC_TRIG_EDGE(EDGE) (((EDGE) == ADC_ExternalTrigInjecConvEdge_None) || \ - ((EDGE) == ADC_ExternalTrigInjecConvEdge_Rising) || \ - ((EDGE) == ADC_ExternalTrigInjecConvEdge_Falling) || \ - ((EDGE) == ADC_ExternalTrigInjecConvEdge_RisingFalling)) - -/** - * @} - */ - - -/** @defgroup ADC_extrenal_trigger_sources_for_injected_channels_conversion - * @{ - */ -#define ADC_ExternalTrigInjecConv_T1_CC4 ((uint32_t)0x00000000) -#define ADC_ExternalTrigInjecConv_T1_TRGO ((uint32_t)0x00010000) -#define ADC_ExternalTrigInjecConv_T2_CC1 ((uint32_t)0x00020000) -#define ADC_ExternalTrigInjecConv_T2_TRGO ((uint32_t)0x00030000) -#define ADC_ExternalTrigInjecConv_T3_CC2 ((uint32_t)0x00040000) -#define ADC_ExternalTrigInjecConv_T3_CC4 ((uint32_t)0x00050000) -#define ADC_ExternalTrigInjecConv_T4_CC1 ((uint32_t)0x00060000) -#define ADC_ExternalTrigInjecConv_T4_CC2 ((uint32_t)0x00070000) -#define ADC_ExternalTrigInjecConv_T4_CC3 ((uint32_t)0x00080000) -#define ADC_ExternalTrigInjecConv_T4_TRGO ((uint32_t)0x00090000) -#define ADC_ExternalTrigInjecConv_T5_CC4 ((uint32_t)0x000A0000) -#define ADC_ExternalTrigInjecConv_T5_TRGO ((uint32_t)0x000B0000) -#define ADC_ExternalTrigInjecConv_T8_CC2 ((uint32_t)0x000C0000) -#define ADC_ExternalTrigInjecConv_T8_CC3 ((uint32_t)0x000D0000) -#define ADC_ExternalTrigInjecConv_T8_CC4 ((uint32_t)0x000E0000) -#define ADC_ExternalTrigInjecConv_Ext_IT15 ((uint32_t)0x000F0000) -#define IS_ADC_EXT_INJEC_TRIG(INJTRIG) (((INJTRIG) == ADC_ExternalTrigInjecConv_T1_CC4) || \ - ((INJTRIG) == ADC_ExternalTrigInjecConv_T1_TRGO) || \ - ((INJTRIG) == ADC_ExternalTrigInjecConv_T2_CC1) || \ - ((INJTRIG) == ADC_ExternalTrigInjecConv_T2_TRGO) || \ - ((INJTRIG) == ADC_ExternalTrigInjecConv_T3_CC2) || \ - ((INJTRIG) == ADC_ExternalTrigInjecConv_T3_CC4) || \ - ((INJTRIG) == ADC_ExternalTrigInjecConv_T4_CC1) || \ - ((INJTRIG) == ADC_ExternalTrigInjecConv_T4_CC2) || \ - ((INJTRIG) == ADC_ExternalTrigInjecConv_T4_CC3) || \ - ((INJTRIG) == ADC_ExternalTrigInjecConv_T4_TRGO) || \ - ((INJTRIG) == ADC_ExternalTrigInjecConv_T5_CC4) || \ - ((INJTRIG) == ADC_ExternalTrigInjecConv_T5_TRGO) || \ - ((INJTRIG) == ADC_ExternalTrigInjecConv_T8_CC2) || \ - ((INJTRIG) == ADC_ExternalTrigInjecConv_T8_CC3) || \ - ((INJTRIG) == ADC_ExternalTrigInjecConv_T8_CC4) || \ - ((INJTRIG) == ADC_ExternalTrigInjecConv_Ext_IT15)) -/** - * @} - */ - - -/** @defgroup ADC_injected_channel_selection - * @{ - */ -#define ADC_InjectedChannel_1 ((uint8_t)0x14) -#define ADC_InjectedChannel_2 ((uint8_t)0x18) -#define ADC_InjectedChannel_3 ((uint8_t)0x1C) -#define ADC_InjectedChannel_4 ((uint8_t)0x20) -#define IS_ADC_INJECTED_CHANNEL(CHANNEL) (((CHANNEL) == ADC_InjectedChannel_1) || \ - ((CHANNEL) == ADC_InjectedChannel_2) || \ - ((CHANNEL) == ADC_InjectedChannel_3) || \ - ((CHANNEL) == ADC_InjectedChannel_4)) -/** - * @} - */ - - -/** @defgroup ADC_analog_watchdog_selection - * @{ - */ -#define ADC_AnalogWatchdog_SingleRegEnable ((uint32_t)0x00800200) -#define ADC_AnalogWatchdog_SingleInjecEnable ((uint32_t)0x00400200) -#define ADC_AnalogWatchdog_SingleRegOrInjecEnable ((uint32_t)0x00C00200) -#define ADC_AnalogWatchdog_AllRegEnable ((uint32_t)0x00800000) -#define ADC_AnalogWatchdog_AllInjecEnable ((uint32_t)0x00400000) -#define ADC_AnalogWatchdog_AllRegAllInjecEnable ((uint32_t)0x00C00000) -#define ADC_AnalogWatchdog_None ((uint32_t)0x00000000) -#define IS_ADC_ANALOG_WATCHDOG(WATCHDOG) (((WATCHDOG) == ADC_AnalogWatchdog_SingleRegEnable) || \ - ((WATCHDOG) == ADC_AnalogWatchdog_SingleInjecEnable) || \ - ((WATCHDOG) == ADC_AnalogWatchdog_SingleRegOrInjecEnable) || \ - ((WATCHDOG) == ADC_AnalogWatchdog_AllRegEnable) || \ - ((WATCHDOG) == ADC_AnalogWatchdog_AllInjecEnable) || \ - ((WATCHDOG) == ADC_AnalogWatchdog_AllRegAllInjecEnable) || \ - ((WATCHDOG) == ADC_AnalogWatchdog_None)) -/** - * @} - */ - - -/** @defgroup ADC_interrupts_definition - * @{ - */ -#define ADC_IT_EOC ((uint16_t)0x0205) -#define ADC_IT_AWD ((uint16_t)0x0106) -#define ADC_IT_JEOC ((uint16_t)0x0407) -#define ADC_IT_OVR ((uint16_t)0x201A) -#define IS_ADC_IT(IT) (((IT) == ADC_IT_EOC) || ((IT) == ADC_IT_AWD) || \ - ((IT) == ADC_IT_JEOC)|| ((IT) == ADC_IT_OVR)) -/** - * @} - */ - - -/** @defgroup ADC_flags_definition - * @{ - */ -#define ADC_FLAG_AWD ((uint8_t)0x01) -#define ADC_FLAG_EOC ((uint8_t)0x02) -#define ADC_FLAG_JEOC ((uint8_t)0x04) -#define ADC_FLAG_JSTRT ((uint8_t)0x08) -#define ADC_FLAG_STRT ((uint8_t)0x10) -#define ADC_FLAG_OVR ((uint8_t)0x20) - -#define IS_ADC_CLEAR_FLAG(FLAG) ((((FLAG) & (uint8_t)0xC0) == 0x00) && ((FLAG) != 0x00)) -#define IS_ADC_GET_FLAG(FLAG) (((FLAG) == ADC_FLAG_AWD) || \ - ((FLAG) == ADC_FLAG_EOC) || \ - ((FLAG) == ADC_FLAG_JEOC) || \ - ((FLAG)== ADC_FLAG_JSTRT) || \ - ((FLAG) == ADC_FLAG_STRT) || \ - ((FLAG)== ADC_FLAG_OVR)) -/** - * @} - */ - - -/** @defgroup ADC_thresholds - * @{ - */ -#define IS_ADC_THRESHOLD(THRESHOLD) ((THRESHOLD) <= 0xFFF) -/** - * @} - */ - - -/** @defgroup ADC_injected_offset - * @{ - */ -#define IS_ADC_OFFSET(OFFSET) ((OFFSET) <= 0xFFF) -/** - * @} - */ - - -/** @defgroup ADC_injected_length - * @{ - */ -#define IS_ADC_INJECTED_LENGTH(LENGTH) (((LENGTH) >= 0x1) && ((LENGTH) <= 0x4)) -/** - * @} - */ - - -/** @defgroup ADC_injected_rank - * @{ - */ -#define IS_ADC_INJECTED_RANK(RANK) (((RANK) >= 0x1) && ((RANK) <= 0x4)) -/** - * @} - */ - - -/** @defgroup ADC_regular_length - * @{ - */ -#define IS_ADC_REGULAR_LENGTH(LENGTH) (((LENGTH) >= 0x1) && ((LENGTH) <= 0x10)) -/** - * @} - */ - - -/** @defgroup ADC_regular_rank - * @{ - */ -#define IS_ADC_REGULAR_RANK(RANK) (((RANK) >= 0x1) && ((RANK) <= 0x10)) -/** - * @} - */ - - -/** @defgroup ADC_regular_discontinuous_mode_number - * @{ - */ -#define IS_ADC_REGULAR_DISC_NUMBER(NUMBER) (((NUMBER) >= 0x1) && ((NUMBER) <= 0x8)) -/** - * @} - */ - - -/** - * @} - */ - -/* Exported macro ------------------------------------------------------------*/ -/* Exported functions --------------------------------------------------------*/ - -/* Function used to set the ADC configuration to the default reset state *****/ -void ADC_DeInit(void); - -/* Initialization and Configuration functions *********************************/ -void ADC_Init(ADC_TypeDef* ADCx, ADC_InitTypeDef* ADC_InitStruct); -void ADC_StructInit(ADC_InitTypeDef* ADC_InitStruct); -void ADC_CommonInit(ADC_CommonInitTypeDef* ADC_CommonInitStruct); -void ADC_CommonStructInit(ADC_CommonInitTypeDef* ADC_CommonInitStruct); -void ADC_Cmd(ADC_TypeDef* ADCx, FunctionalState NewState); - -/* Analog Watchdog configuration functions ************************************/ -void ADC_AnalogWatchdogCmd(ADC_TypeDef* ADCx, uint32_t ADC_AnalogWatchdog); -void ADC_AnalogWatchdogThresholdsConfig(ADC_TypeDef* ADCx, uint16_t HighThreshold,uint16_t LowThreshold); -void ADC_AnalogWatchdogSingleChannelConfig(ADC_TypeDef* ADCx, uint8_t ADC_Channel); - -/* Temperature Sensor, Vrefint and VBAT management functions ******************/ -void ADC_TempSensorVrefintCmd(FunctionalState NewState); -void ADC_VBATCmd(FunctionalState NewState); - -/* Regular Channels Configuration functions ***********************************/ -void ADC_RegularChannelConfig(ADC_TypeDef* ADCx, uint8_t ADC_Channel, uint8_t Rank, uint8_t ADC_SampleTime); -void ADC_SoftwareStartConv(ADC_TypeDef* ADCx); -FlagStatus ADC_GetSoftwareStartConvStatus(ADC_TypeDef* ADCx); -void ADC_EOCOnEachRegularChannelCmd(ADC_TypeDef* ADCx, FunctionalState NewState); -void ADC_ContinuousModeCmd(ADC_TypeDef* ADCx, FunctionalState NewState); -void ADC_DiscModeChannelCountConfig(ADC_TypeDef* ADCx, uint8_t Number); -void ADC_DiscModeCmd(ADC_TypeDef* ADCx, FunctionalState NewState); -uint16_t ADC_GetConversionValue(ADC_TypeDef* ADCx); -uint32_t ADC_GetMultiModeConversionValue(void); - -/* Regular Channels DMA Configuration functions *******************************/ -void ADC_DMACmd(ADC_TypeDef* ADCx, FunctionalState NewState); -void ADC_DMARequestAfterLastTransferCmd(ADC_TypeDef* ADCx, FunctionalState NewState); -void ADC_MultiModeDMARequestAfterLastTransferCmd(FunctionalState NewState); - -/* Injected channels Configuration functions **********************************/ -void ADC_InjectedChannelConfig(ADC_TypeDef* ADCx, uint8_t ADC_Channel, uint8_t Rank, uint8_t ADC_SampleTime); -void ADC_InjectedSequencerLengthConfig(ADC_TypeDef* ADCx, uint8_t Length); -void ADC_SetInjectedOffset(ADC_TypeDef* ADCx, uint8_t ADC_InjectedChannel, uint16_t Offset); -void ADC_ExternalTrigInjectedConvConfig(ADC_TypeDef* ADCx, uint32_t ADC_ExternalTrigInjecConv); -void ADC_ExternalTrigInjectedConvEdgeConfig(ADC_TypeDef* ADCx, uint32_t ADC_ExternalTrigInjecConvEdge); -void ADC_SoftwareStartInjectedConv(ADC_TypeDef* ADCx); -FlagStatus ADC_GetSoftwareStartInjectedConvCmdStatus(ADC_TypeDef* ADCx); -void ADC_AutoInjectedConvCmd(ADC_TypeDef* ADCx, FunctionalState NewState); -void ADC_InjectedDiscModeCmd(ADC_TypeDef* ADCx, FunctionalState NewState); -uint16_t ADC_GetInjectedConversionValue(ADC_TypeDef* ADCx, uint8_t ADC_InjectedChannel); - -/* Interrupts and flags management functions **********************************/ -void ADC_ITConfig(ADC_TypeDef* ADCx, uint16_t ADC_IT, FunctionalState NewState); -FlagStatus ADC_GetFlagStatus(ADC_TypeDef* ADCx, uint8_t ADC_FLAG); -void ADC_ClearFlag(ADC_TypeDef* ADCx, uint8_t ADC_FLAG); -ITStatus ADC_GetITStatus(ADC_TypeDef* ADCx, uint16_t ADC_IT); -void ADC_ClearITPendingBit(ADC_TypeDef* ADCx, uint16_t ADC_IT); - -#ifdef __cplusplus -} -#endif - -#endif /*__STM32F4xx_ADC_H */ - -/** - * @} - */ - -/** - * @} - */ - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/stm/lib/stm32f4xx_conf.h b/stm/lib/stm32f4xx_conf.h deleted file mode 100644 index 515a93c6e..000000000 --- a/stm/lib/stm32f4xx_conf.h +++ /dev/null @@ -1,122 +0,0 @@ -/** - ****************************************************************************** - * @file Project/STM32F4xx_StdPeriph_Templates/stm32f4xx_conf.h - * @author MCD Application Team - * @version V1.3.0 - * @date 13-November-2013 - * @brief Library configuration file. - ****************************************************************************** - * @attention - * - *

© COPYRIGHT 2013 STMicroelectronics

- * - * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License"); - * You may not use this file except in compliance with the License. - * You may obtain a copy of the License at: - * - * http://www.st.com/software_license_agreement_liberty_v2 - * - * Unless required by applicable law or agreed to in writing, software - * distributed under the License is distributed on an "AS IS" BASIS, - * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - * See the License for the specific language governing permissions and - * limitations under the License. - * - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F4xx_CONF_H -#define __STM32F4xx_CONF_H - -/* Includes ------------------------------------------------------------------*/ -/* Uncomment the line below to enable peripheral header file inclusion */ -#include "stm32f4xx_adc.h" -//#include "stm32f4xx_crc.h" -//#include "stm32f4xx_dbgmcu.h" -#include "stm32f4xx_dma.h" -#include "stm32f4xx_exti.h" -#include "stm32f4xx_flash.h" -#include "stm32f4xx_gpio.h" -#include "stm32f4xx_i2c.h" -//#include "stm32f4xx_iwdg.h" -#include "stm32f4xx_pwr.h" -#include "stm32f4xx_rcc.h" -#include "stm32f4xx_rtc.h" -#include "stm32f4xx_sdio.h" -#include "stm32f4xx_spi.h" -#include "stm32f4xx_syscfg.h" -#include "stm32f4xx_tim.h" -#include "stm32f4xx_usart.h" -//#include "stm32f4xx_wwdg.h" -#include "stm_misc.h" /* High level functions for NVIC and SysTick (add-on to CMSIS functions) */ - -#if defined (STM32F429_439xx) -#include "stm32f4xx_cryp.h" -#include "stm32f4xx_hash.h" -#include "stm32f4xx_rng.h" -#include "stm32f4xx_can.h" -#include "stm32f4xx_dac.h" -#include "stm32f4xx_dcmi.h" -#include "stm32f4xx_dma2d.h" -#include "stm32f4xx_fmc.h" -#include "stm32f4xx_ltdc.h" -#include "stm32f4xx_sai.h" -#endif /* STM32F429_439xx */ - -#if defined (STM32F427_437xx) -#include "stm32f4xx_cryp.h" -#include "stm32f4xx_hash.h" -#include "stm32f4xx_rng.h" -#include "stm32f4xx_can.h" -#include "stm32f4xx_dac.h" -#include "stm32f4xx_dcmi.h" -#include "stm32f4xx_dma2d.h" -#include "stm32f4xx_fmc.h" -#include "stm32f4xx_sai.h" -#endif /* STM32F427_437xx */ - -#if defined (STM32F40_41xxx) -//#include "stm32f4xx_cryp.h" -//#include "stm32f4xx_hash.h" -#include "stm32f4xx_rng.h" -//#include "stm32f4xx_can.h" -#include "stm32f4xx_dac.h" -//#include "stm32f4xx_dcmi.h" -//#include "stm32f4xx_fsmc.h" -#endif /* STM32F40_41xxx */ - -/* Exported types ------------------------------------------------------------*/ -/* Exported constants --------------------------------------------------------*/ - -/* If an external clock source is used, then the value of the following define - should be set to the value of the external clock source, else, if no external - clock is used, keep this define commented */ -/*#define I2S_EXTERNAL_CLOCK_VAL 12288000 */ /* Value of the external clock in Hz */ - - -/* Uncomment the line below to expanse the "assert_param" macro in the - Standard Peripheral Library drivers code */ -/* #define USE_FULL_ASSERT 1 */ - -/* Exported macro ------------------------------------------------------------*/ -#ifdef USE_FULL_ASSERT - -/** - * @brief The assert_param macro is used for function's parameters check. - * @param expr: If expr is false, it calls assert_failed function - * which reports the name of the source file and the source - * line number of the call that failed. - * If expr is true, it returns no value. - * @retval None - */ - #define assert_param(expr) ((expr) ? (void)0 : assert_failed((uint8_t *)__FILE__, __LINE__)) -/* Exported functions ------------------------------------------------------- */ - void assert_failed(uint8_t* file, uint32_t line); -#else - #define assert_param(expr) ((void)0) -#endif /* USE_FULL_ASSERT */ - -#endif /* __STM32F4xx_CONF_H */ - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/stm/lib/stm32f4xx_dac.c b/stm/lib/stm32f4xx_dac.c deleted file mode 100644 index daff78d88..000000000 --- a/stm/lib/stm32f4xx_dac.c +++ /dev/null @@ -1,714 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f4xx_dac.c - * @author MCD Application Team - * @version V1.3.0 - * @date 08-November-2013 - * @brief This file provides firmware functions to manage the following - * functionalities of the Digital-to-Analog Converter (DAC) peripheral: - * + DAC channels configuration: trigger, output buffer, data format - * + DMA management - * + Interrupts and flags management - * - @verbatim - =============================================================================== - ##### DAC Peripheral features ##### - =============================================================================== - [..] - *** DAC Channels *** - ==================== - [..] - The device integrates two 12-bit Digital Analog Converters that can - be used independently or simultaneously (dual mode): - (#) DAC channel1 with DAC_OUT1 (PA4) as output - (#) DAC channel2 with DAC_OUT2 (PA5) as output - - *** DAC Triggers *** - ==================== - [..] - Digital to Analog conversion can be non-triggered using DAC_Trigger_None - and DAC_OUT1/DAC_OUT2 is available once writing to DHRx register - using DAC_SetChannel1Data() / DAC_SetChannel2Data() functions. - [..] - Digital to Analog conversion can be triggered by: - (#) External event: EXTI Line 9 (any GPIOx_Pin9) using DAC_Trigger_Ext_IT9. - The used pin (GPIOx_Pin9) must be configured in input mode. - - (#) Timers TRGO: TIM2, TIM4, TIM5, TIM6, TIM7 and TIM8 - (DAC_Trigger_T2_TRGO, DAC_Trigger_T4_TRGO...) - The timer TRGO event should be selected using TIM_SelectOutputTrigger() - - (#) Software using DAC_Trigger_Software - - *** DAC Buffer mode feature *** - =============================== - [..] - Each DAC channel integrates an output buffer that can be used to - reduce the output impedance, and to drive external loads directly - without having to add an external operational amplifier. - To enable, the output buffer use - DAC_InitStructure.DAC_OutputBuffer = DAC_OutputBuffer_Enable; - [..] - (@) Refer to the device datasheet for more details about output - impedance value with and without output buffer. - - *** DAC wave generation feature *** - =================================== - [..] - Both DAC channels can be used to generate - (#) Noise wave using DAC_WaveGeneration_Noise - (#) Triangle wave using DAC_WaveGeneration_Triangle - - -@- Wave generation can be disabled using DAC_WaveGeneration_None - - *** DAC data format *** - ======================= - [..] - The DAC data format can be: - (#) 8-bit right alignment using DAC_Align_8b_R - (#) 12-bit left alignment using DAC_Align_12b_L - (#) 12-bit right alignment using DAC_Align_12b_R - - *** DAC data value to voltage correspondence *** - ================================================ - [..] - The analog output voltage on each DAC channel pin is determined - by the following equation: - DAC_OUTx = VREF+ * DOR / 4095 - with DOR is the Data Output Register - VEF+ is the input voltage reference (refer to the device datasheet) - e.g. To set DAC_OUT1 to 0.7V, use - DAC_SetChannel1Data(DAC_Align_12b_R, 868); - Assuming that VREF+ = 3.3V, DAC_OUT1 = (3.3 * 868) / 4095 = 0.7V - - *** DMA requests *** - ===================== - [..] - A DMA1 request can be generated when an external trigger (but not - a software trigger) occurs if DMA1 requests are enabled using - DAC_DMACmd() - [..] - DMA1 requests are mapped as following: - (#) DAC channel1 : mapped on DMA1 Stream5 channel7 which must be - already configured - (#) DAC channel2 : mapped on DMA1 Stream6 channel7 which must be - already configured - - - ##### How to use this driver ##### - =============================================================================== - [..] - (+) DAC APB clock must be enabled to get write access to DAC - registers using - RCC_APB1PeriphClockCmd(RCC_APB1Periph_DAC, ENABLE) - (+) Configure DAC_OUTx (DAC_OUT1: PA4, DAC_OUT2: PA5) in analog mode. - (+) Configure the DAC channel using DAC_Init() function - (+) Enable the DAC channel using DAC_Cmd() function - - @endverbatim - ****************************************************************************** - * @attention - * - *

© COPYRIGHT 2013 STMicroelectronics

- * - * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License"); - * You may not use this file except in compliance with the License. - * You may obtain a copy of the License at: - * - * http://www.st.com/software_license_agreement_liberty_v2 - * - * Unless required by applicable law or agreed to in writing, software - * distributed under the License is distributed on an "AS IS" BASIS, - * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - * See the License for the specific language governing permissions and - * limitations under the License. - * - ****************************************************************************** - */ - - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx_dac.h" -#include "stm32f4xx_rcc.h" - -/** @addtogroup STM32F4xx_StdPeriph_Driver - * @{ - */ - -/** @defgroup DAC - * @brief DAC driver modules - * @{ - */ - -/* Private typedef -----------------------------------------------------------*/ -/* Private define ------------------------------------------------------------*/ - -/* CR register Mask */ -#define CR_CLEAR_MASK ((uint32_t)0x00000FFE) - -/* DAC Dual Channels SWTRIG masks */ -#define DUAL_SWTRIG_SET ((uint32_t)0x00000003) -#define DUAL_SWTRIG_RESET ((uint32_t)0xFFFFFFFC) - -/* DHR registers offsets */ -#define DHR12R1_OFFSET ((uint32_t)0x00000008) -#define DHR12R2_OFFSET ((uint32_t)0x00000014) -#define DHR12RD_OFFSET ((uint32_t)0x00000020) - -/* DOR register offset */ -#define DOR_OFFSET ((uint32_t)0x0000002C) - -/* Private macro -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -/* Private function prototypes -----------------------------------------------*/ -/* Private functions ---------------------------------------------------------*/ - -/** @defgroup DAC_Private_Functions - * @{ - */ - -/** @defgroup DAC_Group1 DAC channels configuration - * @brief DAC channels configuration: trigger, output buffer, data format - * -@verbatim - =============================================================================== - ##### DAC channels configuration: trigger, output buffer, data format ##### - =============================================================================== - -@endverbatim - * @{ - */ - -/** - * @brief Deinitializes the DAC peripheral registers to their default reset values. - * @param None - * @retval None - */ -void DAC_DeInit(void) -{ - /* Enable DAC reset state */ - RCC_APB1PeriphResetCmd(RCC_APB1Periph_DAC, ENABLE); - /* Release DAC from reset state */ - RCC_APB1PeriphResetCmd(RCC_APB1Periph_DAC, DISABLE); -} - -/** - * @brief Initializes the DAC peripheral according to the specified parameters - * in the DAC_InitStruct. - * @param DAC_Channel: the selected DAC channel. - * This parameter can be one of the following values: - * @arg DAC_Channel_1: DAC Channel1 selected - * @arg DAC_Channel_2: DAC Channel2 selected - * @param DAC_InitStruct: pointer to a DAC_InitTypeDef structure that contains - * the configuration information for the specified DAC channel. - * @retval None - */ -void DAC_Init(uint32_t DAC_Channel, DAC_InitTypeDef* DAC_InitStruct) -{ - uint32_t tmpreg1 = 0, tmpreg2 = 0; - - /* Check the DAC parameters */ - assert_param(IS_DAC_TRIGGER(DAC_InitStruct->DAC_Trigger)); - assert_param(IS_DAC_GENERATE_WAVE(DAC_InitStruct->DAC_WaveGeneration)); - assert_param(IS_DAC_LFSR_UNMASK_TRIANGLE_AMPLITUDE(DAC_InitStruct->DAC_LFSRUnmask_TriangleAmplitude)); - assert_param(IS_DAC_OUTPUT_BUFFER_STATE(DAC_InitStruct->DAC_OutputBuffer)); - -/*---------------------------- DAC CR Configuration --------------------------*/ - /* Get the DAC CR value */ - tmpreg1 = DAC->CR; - /* Clear BOFFx, TENx, TSELx, WAVEx and MAMPx bits */ - tmpreg1 &= ~(CR_CLEAR_MASK << DAC_Channel); - /* Configure for the selected DAC channel: buffer output, trigger, - wave generation, mask/amplitude for wave generation */ - /* Set TSELx and TENx bits according to DAC_Trigger value */ - /* Set WAVEx bits according to DAC_WaveGeneration value */ - /* Set MAMPx bits according to DAC_LFSRUnmask_TriangleAmplitude value */ - /* Set BOFFx bit according to DAC_OutputBuffer value */ - tmpreg2 = (DAC_InitStruct->DAC_Trigger | DAC_InitStruct->DAC_WaveGeneration | - DAC_InitStruct->DAC_LFSRUnmask_TriangleAmplitude | \ - DAC_InitStruct->DAC_OutputBuffer); - /* Calculate CR register value depending on DAC_Channel */ - tmpreg1 |= tmpreg2 << DAC_Channel; - /* Write to DAC CR */ - DAC->CR = tmpreg1; -} - -/** - * @brief Fills each DAC_InitStruct member with its default value. - * @param DAC_InitStruct: pointer to a DAC_InitTypeDef structure which will - * be initialized. - * @retval None - */ -void DAC_StructInit(DAC_InitTypeDef* DAC_InitStruct) -{ -/*--------------- Reset DAC init structure parameters values -----------------*/ - /* Initialize the DAC_Trigger member */ - DAC_InitStruct->DAC_Trigger = DAC_Trigger_None; - /* Initialize the DAC_WaveGeneration member */ - DAC_InitStruct->DAC_WaveGeneration = DAC_WaveGeneration_None; - /* Initialize the DAC_LFSRUnmask_TriangleAmplitude member */ - DAC_InitStruct->DAC_LFSRUnmask_TriangleAmplitude = DAC_LFSRUnmask_Bit0; - /* Initialize the DAC_OutputBuffer member */ - DAC_InitStruct->DAC_OutputBuffer = DAC_OutputBuffer_Enable; -} - -/** - * @brief Enables or disables the specified DAC channel. - * @param DAC_Channel: The selected DAC channel. - * This parameter can be one of the following values: - * @arg DAC_Channel_1: DAC Channel1 selected - * @arg DAC_Channel_2: DAC Channel2 selected - * @param NewState: new state of the DAC channel. - * This parameter can be: ENABLE or DISABLE. - * @note When the DAC channel is enabled the trigger source can no more be modified. - * @retval None - */ -void DAC_Cmd(uint32_t DAC_Channel, FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_DAC_CHANNEL(DAC_Channel)); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - - if (NewState != DISABLE) - { - /* Enable the selected DAC channel */ - DAC->CR |= (DAC_CR_EN1 << DAC_Channel); - } - else - { - /* Disable the selected DAC channel */ - DAC->CR &= (~(DAC_CR_EN1 << DAC_Channel)); - } -} - -/** - * @brief Enables or disables the selected DAC channel software trigger. - * @param DAC_Channel: The selected DAC channel. - * This parameter can be one of the following values: - * @arg DAC_Channel_1: DAC Channel1 selected - * @arg DAC_Channel_2: DAC Channel2 selected - * @param NewState: new state of the selected DAC channel software trigger. - * This parameter can be: ENABLE or DISABLE. - * @retval None - */ -void DAC_SoftwareTriggerCmd(uint32_t DAC_Channel, FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_DAC_CHANNEL(DAC_Channel)); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - - if (NewState != DISABLE) - { - /* Enable software trigger for the selected DAC channel */ - DAC->SWTRIGR |= (uint32_t)DAC_SWTRIGR_SWTRIG1 << (DAC_Channel >> 4); - } - else - { - /* Disable software trigger for the selected DAC channel */ - DAC->SWTRIGR &= ~((uint32_t)DAC_SWTRIGR_SWTRIG1 << (DAC_Channel >> 4)); - } -} - -/** - * @brief Enables or disables simultaneously the two DAC channels software triggers. - * @param NewState: new state of the DAC channels software triggers. - * This parameter can be: ENABLE or DISABLE. - * @retval None - */ -void DAC_DualSoftwareTriggerCmd(FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_FUNCTIONAL_STATE(NewState)); - - if (NewState != DISABLE) - { - /* Enable software trigger for both DAC channels */ - DAC->SWTRIGR |= DUAL_SWTRIG_SET; - } - else - { - /* Disable software trigger for both DAC channels */ - DAC->SWTRIGR &= DUAL_SWTRIG_RESET; - } -} - -/** - * @brief Enables or disables the selected DAC channel wave generation. - * @param DAC_Channel: The selected DAC channel. - * This parameter can be one of the following values: - * @arg DAC_Channel_1: DAC Channel1 selected - * @arg DAC_Channel_2: DAC Channel2 selected - * @param DAC_Wave: specifies the wave type to enable or disable. - * This parameter can be one of the following values: - * @arg DAC_Wave_Noise: noise wave generation - * @arg DAC_Wave_Triangle: triangle wave generation - * @param NewState: new state of the selected DAC channel wave generation. - * This parameter can be: ENABLE or DISABLE. - * @retval None - */ -void DAC_WaveGenerationCmd(uint32_t DAC_Channel, uint32_t DAC_Wave, FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_DAC_CHANNEL(DAC_Channel)); - assert_param(IS_DAC_WAVE(DAC_Wave)); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - - if (NewState != DISABLE) - { - /* Enable the selected wave generation for the selected DAC channel */ - DAC->CR |= DAC_Wave << DAC_Channel; - } - else - { - /* Disable the selected wave generation for the selected DAC channel */ - DAC->CR &= ~(DAC_Wave << DAC_Channel); - } -} - -/** - * @brief Set the specified data holding register value for DAC channel1. - * @param DAC_Align: Specifies the data alignment for DAC channel1. - * This parameter can be one of the following values: - * @arg DAC_Align_8b_R: 8bit right data alignment selected - * @arg DAC_Align_12b_L: 12bit left data alignment selected - * @arg DAC_Align_12b_R: 12bit right data alignment selected - * @param Data: Data to be loaded in the selected data holding register. - * @retval None - */ -void DAC_SetChannel1Data(uint32_t DAC_Align, uint16_t Data) -{ - __IO uint32_t tmp = 0; - - /* Check the parameters */ - assert_param(IS_DAC_ALIGN(DAC_Align)); - assert_param(IS_DAC_DATA(Data)); - - tmp = (uint32_t)DAC_BASE; - tmp += DHR12R1_OFFSET + DAC_Align; - - /* Set the DAC channel1 selected data holding register */ - *(__IO uint32_t *) tmp = Data; -} - -/** - * @brief Set the specified data holding register value for DAC channel2. - * @param DAC_Align: Specifies the data alignment for DAC channel2. - * This parameter can be one of the following values: - * @arg DAC_Align_8b_R: 8bit right data alignment selected - * @arg DAC_Align_12b_L: 12bit left data alignment selected - * @arg DAC_Align_12b_R: 12bit right data alignment selected - * @param Data: Data to be loaded in the selected data holding register. - * @retval None - */ -void DAC_SetChannel2Data(uint32_t DAC_Align, uint16_t Data) -{ - __IO uint32_t tmp = 0; - - /* Check the parameters */ - assert_param(IS_DAC_ALIGN(DAC_Align)); - assert_param(IS_DAC_DATA(Data)); - - tmp = (uint32_t)DAC_BASE; - tmp += DHR12R2_OFFSET + DAC_Align; - - /* Set the DAC channel2 selected data holding register */ - *(__IO uint32_t *)tmp = Data; -} - -/** - * @brief Set the specified data holding register value for dual channel DAC. - * @param DAC_Align: Specifies the data alignment for dual channel DAC. - * This parameter can be one of the following values: - * @arg DAC_Align_8b_R: 8bit right data alignment selected - * @arg DAC_Align_12b_L: 12bit left data alignment selected - * @arg DAC_Align_12b_R: 12bit right data alignment selected - * @param Data2: Data for DAC Channel2 to be loaded in the selected data holding register. - * @param Data1: Data for DAC Channel1 to be loaded in the selected data holding register. - * @note In dual mode, a unique register access is required to write in both - * DAC channels at the same time. - * @retval None - */ -void DAC_SetDualChannelData(uint32_t DAC_Align, uint16_t Data2, uint16_t Data1) -{ - uint32_t data = 0, tmp = 0; - - /* Check the parameters */ - assert_param(IS_DAC_ALIGN(DAC_Align)); - assert_param(IS_DAC_DATA(Data1)); - assert_param(IS_DAC_DATA(Data2)); - - /* Calculate and set dual DAC data holding register value */ - if (DAC_Align == DAC_Align_8b_R) - { - data = ((uint32_t)Data2 << 8) | Data1; - } - else - { - data = ((uint32_t)Data2 << 16) | Data1; - } - - tmp = (uint32_t)DAC_BASE; - tmp += DHR12RD_OFFSET + DAC_Align; - - /* Set the dual DAC selected data holding register */ - *(__IO uint32_t *)tmp = data; -} - -/** - * @brief Returns the last data output value of the selected DAC channel. - * @param DAC_Channel: The selected DAC channel. - * This parameter can be one of the following values: - * @arg DAC_Channel_1: DAC Channel1 selected - * @arg DAC_Channel_2: DAC Channel2 selected - * @retval The selected DAC channel data output value. - */ -uint16_t DAC_GetDataOutputValue(uint32_t DAC_Channel) -{ - __IO uint32_t tmp = 0; - - /* Check the parameters */ - assert_param(IS_DAC_CHANNEL(DAC_Channel)); - - tmp = (uint32_t) DAC_BASE ; - tmp += DOR_OFFSET + ((uint32_t)DAC_Channel >> 2); - - /* Returns the DAC channel data output register value */ - return (uint16_t) (*(__IO uint32_t*) tmp); -} -/** - * @} - */ - -/** @defgroup DAC_Group2 DMA management functions - * @brief DMA management functions - * -@verbatim - =============================================================================== - ##### DMA management functions ##### - =============================================================================== - -@endverbatim - * @{ - */ - -/** - * @brief Enables or disables the specified DAC channel DMA request. - * @note When enabled DMA1 is generated when an external trigger (EXTI Line9, - * TIM2, TIM4, TIM5, TIM6, TIM7 or TIM8 but not a software trigger) occurs. - * @param DAC_Channel: The selected DAC channel. - * This parameter can be one of the following values: - * @arg DAC_Channel_1: DAC Channel1 selected - * @arg DAC_Channel_2: DAC Channel2 selected - * @param NewState: new state of the selected DAC channel DMA request. - * This parameter can be: ENABLE or DISABLE. - * @note The DAC channel1 is mapped on DMA1 Stream 5 channel7 which must be - * already configured. - * @note The DAC channel2 is mapped on DMA1 Stream 6 channel7 which must be - * already configured. - * @retval None - */ -void DAC_DMACmd(uint32_t DAC_Channel, FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_DAC_CHANNEL(DAC_Channel)); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - - if (NewState != DISABLE) - { - /* Enable the selected DAC channel DMA request */ - DAC->CR |= (DAC_CR_DMAEN1 << DAC_Channel); - } - else - { - /* Disable the selected DAC channel DMA request */ - DAC->CR &= (~(DAC_CR_DMAEN1 << DAC_Channel)); - } -} -/** - * @} - */ - -/** @defgroup DAC_Group3 Interrupts and flags management functions - * @brief Interrupts and flags management functions - * -@verbatim - =============================================================================== - ##### Interrupts and flags management functions ##### - =============================================================================== - -@endverbatim - * @{ - */ - -/** - * @brief Enables or disables the specified DAC interrupts. - * @param DAC_Channel: The selected DAC channel. - * This parameter can be one of the following values: - * @arg DAC_Channel_1: DAC Channel1 selected - * @arg DAC_Channel_2: DAC Channel2 selected - * @param DAC_IT: specifies the DAC interrupt sources to be enabled or disabled. - * This parameter can be the following values: - * @arg DAC_IT_DMAUDR: DMA underrun interrupt mask - * @note The DMA underrun occurs when a second external trigger arrives before the - * acknowledgement for the first external trigger is received (first request). - * @param NewState: new state of the specified DAC interrupts. - * This parameter can be: ENABLE or DISABLE. - * @retval None - */ -void DAC_ITConfig(uint32_t DAC_Channel, uint32_t DAC_IT, FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_DAC_CHANNEL(DAC_Channel)); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - assert_param(IS_DAC_IT(DAC_IT)); - - if (NewState != DISABLE) - { - /* Enable the selected DAC interrupts */ - DAC->CR |= (DAC_IT << DAC_Channel); - } - else - { - /* Disable the selected DAC interrupts */ - DAC->CR &= (~(uint32_t)(DAC_IT << DAC_Channel)); - } -} - -/** - * @brief Checks whether the specified DAC flag is set or not. - * @param DAC_Channel: The selected DAC channel. - * This parameter can be one of the following values: - * @arg DAC_Channel_1: DAC Channel1 selected - * @arg DAC_Channel_2: DAC Channel2 selected - * @param DAC_FLAG: specifies the flag to check. - * This parameter can be only of the following value: - * @arg DAC_FLAG_DMAUDR: DMA underrun flag - * @note The DMA underrun occurs when a second external trigger arrives before the - * acknowledgement for the first external trigger is received (first request). - * @retval The new state of DAC_FLAG (SET or RESET). - */ -FlagStatus DAC_GetFlagStatus(uint32_t DAC_Channel, uint32_t DAC_FLAG) -{ - FlagStatus bitstatus = RESET; - /* Check the parameters */ - assert_param(IS_DAC_CHANNEL(DAC_Channel)); - assert_param(IS_DAC_FLAG(DAC_FLAG)); - - /* Check the status of the specified DAC flag */ - if ((DAC->SR & (DAC_FLAG << DAC_Channel)) != (uint8_t)RESET) - { - /* DAC_FLAG is set */ - bitstatus = SET; - } - else - { - /* DAC_FLAG is reset */ - bitstatus = RESET; - } - /* Return the DAC_FLAG status */ - return bitstatus; -} - -/** - * @brief Clears the DAC channel's pending flags. - * @param DAC_Channel: The selected DAC channel. - * This parameter can be one of the following values: - * @arg DAC_Channel_1: DAC Channel1 selected - * @arg DAC_Channel_2: DAC Channel2 selected - * @param DAC_FLAG: specifies the flag to clear. - * This parameter can be of the following value: - * @arg DAC_FLAG_DMAUDR: DMA underrun flag - * @note The DMA underrun occurs when a second external trigger arrives before the - * acknowledgement for the first external trigger is received (first request). - * @retval None - */ -void DAC_ClearFlag(uint32_t DAC_Channel, uint32_t DAC_FLAG) -{ - /* Check the parameters */ - assert_param(IS_DAC_CHANNEL(DAC_Channel)); - assert_param(IS_DAC_FLAG(DAC_FLAG)); - - /* Clear the selected DAC flags */ - DAC->SR = (DAC_FLAG << DAC_Channel); -} - -/** - * @brief Checks whether the specified DAC interrupt has occurred or not. - * @param DAC_Channel: The selected DAC channel. - * This parameter can be one of the following values: - * @arg DAC_Channel_1: DAC Channel1 selected - * @arg DAC_Channel_2: DAC Channel2 selected - * @param DAC_IT: specifies the DAC interrupt source to check. - * This parameter can be the following values: - * @arg DAC_IT_DMAUDR: DMA underrun interrupt mask - * @note The DMA underrun occurs when a second external trigger arrives before the - * acknowledgement for the first external trigger is received (first request). - * @retval The new state of DAC_IT (SET or RESET). - */ -ITStatus DAC_GetITStatus(uint32_t DAC_Channel, uint32_t DAC_IT) -{ - ITStatus bitstatus = RESET; - uint32_t enablestatus = 0; - - /* Check the parameters */ - assert_param(IS_DAC_CHANNEL(DAC_Channel)); - assert_param(IS_DAC_IT(DAC_IT)); - - /* Get the DAC_IT enable bit status */ - enablestatus = (DAC->CR & (DAC_IT << DAC_Channel)) ; - - /* Check the status of the specified DAC interrupt */ - if (((DAC->SR & (DAC_IT << DAC_Channel)) != (uint32_t)RESET) && enablestatus) - { - /* DAC_IT is set */ - bitstatus = SET; - } - else - { - /* DAC_IT is reset */ - bitstatus = RESET; - } - /* Return the DAC_IT status */ - return bitstatus; -} - -/** - * @brief Clears the DAC channel's interrupt pending bits. - * @param DAC_Channel: The selected DAC channel. - * This parameter can be one of the following values: - * @arg DAC_Channel_1: DAC Channel1 selected - * @arg DAC_Channel_2: DAC Channel2 selected - * @param DAC_IT: specifies the DAC interrupt pending bit to clear. - * This parameter can be the following values: - * @arg DAC_IT_DMAUDR: DMA underrun interrupt mask - * @note The DMA underrun occurs when a second external trigger arrives before the - * acknowledgement for the first external trigger is received (first request). - * @retval None - */ -void DAC_ClearITPendingBit(uint32_t DAC_Channel, uint32_t DAC_IT) -{ - /* Check the parameters */ - assert_param(IS_DAC_CHANNEL(DAC_Channel)); - assert_param(IS_DAC_IT(DAC_IT)); - - /* Clear the selected DAC interrupt pending bits */ - DAC->SR = (DAC_IT << DAC_Channel); -} - -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/stm/lib/stm32f4xx_dac.h b/stm/lib/stm32f4xx_dac.h deleted file mode 100644 index 224bec1a1..000000000 --- a/stm/lib/stm32f4xx_dac.h +++ /dev/null @@ -1,304 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f4xx_dac.h - * @author MCD Application Team - * @version V1.3.0 - * @date 08-November-2013 - * @brief This file contains all the functions prototypes for the DAC firmware - * library. - ****************************************************************************** - * @attention - * - *

© COPYRIGHT 2013 STMicroelectronics

- * - * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License"); - * You may not use this file except in compliance with the License. - * You may obtain a copy of the License at: - * - * http://www.st.com/software_license_agreement_liberty_v2 - * - * Unless required by applicable law or agreed to in writing, software - * distributed under the License is distributed on an "AS IS" BASIS, - * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - * See the License for the specific language governing permissions and - * limitations under the License. - * - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F4xx_DAC_H -#define __STM32F4xx_DAC_H - -#ifdef __cplusplus - extern "C" { -#endif - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx.h" - -/** @addtogroup STM32F4xx_StdPeriph_Driver - * @{ - */ - -/** @addtogroup DAC - * @{ - */ - -/* Exported types ------------------------------------------------------------*/ - -/** - * @brief DAC Init structure definition - */ - -typedef struct -{ - uint32_t DAC_Trigger; /*!< Specifies the external trigger for the selected DAC channel. - This parameter can be a value of @ref DAC_trigger_selection */ - - uint32_t DAC_WaveGeneration; /*!< Specifies whether DAC channel noise waves or triangle waves - are generated, or whether no wave is generated. - This parameter can be a value of @ref DAC_wave_generation */ - - uint32_t DAC_LFSRUnmask_TriangleAmplitude; /*!< Specifies the LFSR mask for noise wave generation or - the maximum amplitude triangle generation for the DAC channel. - This parameter can be a value of @ref DAC_lfsrunmask_triangleamplitude */ - - uint32_t DAC_OutputBuffer; /*!< Specifies whether the DAC channel output buffer is enabled or disabled. - This parameter can be a value of @ref DAC_output_buffer */ -}DAC_InitTypeDef; - -/* Exported constants --------------------------------------------------------*/ - -/** @defgroup DAC_Exported_Constants - * @{ - */ - -/** @defgroup DAC_trigger_selection - * @{ - */ - -#define DAC_Trigger_None ((uint32_t)0x00000000) /*!< Conversion is automatic once the DAC1_DHRxxxx register - has been loaded, and not by external trigger */ -#define DAC_Trigger_T2_TRGO ((uint32_t)0x00000024) /*!< TIM2 TRGO selected as external conversion trigger for DAC channel */ -#define DAC_Trigger_T4_TRGO ((uint32_t)0x0000002C) /*!< TIM4 TRGO selected as external conversion trigger for DAC channel */ -#define DAC_Trigger_T5_TRGO ((uint32_t)0x0000001C) /*!< TIM5 TRGO selected as external conversion trigger for DAC channel */ -#define DAC_Trigger_T6_TRGO ((uint32_t)0x00000004) /*!< TIM6 TRGO selected as external conversion trigger for DAC channel */ -#define DAC_Trigger_T7_TRGO ((uint32_t)0x00000014) /*!< TIM7 TRGO selected as external conversion trigger for DAC channel */ -#define DAC_Trigger_T8_TRGO ((uint32_t)0x0000000C) /*!< TIM8 TRGO selected as external conversion trigger for DAC channel */ - -#define DAC_Trigger_Ext_IT9 ((uint32_t)0x00000034) /*!< EXTI Line9 event selected as external conversion trigger for DAC channel */ -#define DAC_Trigger_Software ((uint32_t)0x0000003C) /*!< Conversion started by software trigger for DAC channel */ - -#define IS_DAC_TRIGGER(TRIGGER) (((TRIGGER) == DAC_Trigger_None) || \ - ((TRIGGER) == DAC_Trigger_T6_TRGO) || \ - ((TRIGGER) == DAC_Trigger_T8_TRGO) || \ - ((TRIGGER) == DAC_Trigger_T7_TRGO) || \ - ((TRIGGER) == DAC_Trigger_T5_TRGO) || \ - ((TRIGGER) == DAC_Trigger_T2_TRGO) || \ - ((TRIGGER) == DAC_Trigger_T4_TRGO) || \ - ((TRIGGER) == DAC_Trigger_Ext_IT9) || \ - ((TRIGGER) == DAC_Trigger_Software)) - -/** - * @} - */ - -/** @defgroup DAC_wave_generation - * @{ - */ - -#define DAC_WaveGeneration_None ((uint32_t)0x00000000) -#define DAC_WaveGeneration_Noise ((uint32_t)0x00000040) -#define DAC_WaveGeneration_Triangle ((uint32_t)0x00000080) -#define IS_DAC_GENERATE_WAVE(WAVE) (((WAVE) == DAC_WaveGeneration_None) || \ - ((WAVE) == DAC_WaveGeneration_Noise) || \ - ((WAVE) == DAC_WaveGeneration_Triangle)) -/** - * @} - */ - -/** @defgroup DAC_lfsrunmask_triangleamplitude - * @{ - */ - -#define DAC_LFSRUnmask_Bit0 ((uint32_t)0x00000000) /*!< Unmask DAC channel LFSR bit0 for noise wave generation */ -#define DAC_LFSRUnmask_Bits1_0 ((uint32_t)0x00000100) /*!< Unmask DAC channel LFSR bit[1:0] for noise wave generation */ -#define DAC_LFSRUnmask_Bits2_0 ((uint32_t)0x00000200) /*!< Unmask DAC channel LFSR bit[2:0] for noise wave generation */ -#define DAC_LFSRUnmask_Bits3_0 ((uint32_t)0x00000300) /*!< Unmask DAC channel LFSR bit[3:0] for noise wave generation */ -#define DAC_LFSRUnmask_Bits4_0 ((uint32_t)0x00000400) /*!< Unmask DAC channel LFSR bit[4:0] for noise wave generation */ -#define DAC_LFSRUnmask_Bits5_0 ((uint32_t)0x00000500) /*!< Unmask DAC channel LFSR bit[5:0] for noise wave generation */ -#define DAC_LFSRUnmask_Bits6_0 ((uint32_t)0x00000600) /*!< Unmask DAC channel LFSR bit[6:0] for noise wave generation */ -#define DAC_LFSRUnmask_Bits7_0 ((uint32_t)0x00000700) /*!< Unmask DAC channel LFSR bit[7:0] for noise wave generation */ -#define DAC_LFSRUnmask_Bits8_0 ((uint32_t)0x00000800) /*!< Unmask DAC channel LFSR bit[8:0] for noise wave generation */ -#define DAC_LFSRUnmask_Bits9_0 ((uint32_t)0x00000900) /*!< Unmask DAC channel LFSR bit[9:0] for noise wave generation */ -#define DAC_LFSRUnmask_Bits10_0 ((uint32_t)0x00000A00) /*!< Unmask DAC channel LFSR bit[10:0] for noise wave generation */ -#define DAC_LFSRUnmask_Bits11_0 ((uint32_t)0x00000B00) /*!< Unmask DAC channel LFSR bit[11:0] for noise wave generation */ -#define DAC_TriangleAmplitude_1 ((uint32_t)0x00000000) /*!< Select max triangle amplitude of 1 */ -#define DAC_TriangleAmplitude_3 ((uint32_t)0x00000100) /*!< Select max triangle amplitude of 3 */ -#define DAC_TriangleAmplitude_7 ((uint32_t)0x00000200) /*!< Select max triangle amplitude of 7 */ -#define DAC_TriangleAmplitude_15 ((uint32_t)0x00000300) /*!< Select max triangle amplitude of 15 */ -#define DAC_TriangleAmplitude_31 ((uint32_t)0x00000400) /*!< Select max triangle amplitude of 31 */ -#define DAC_TriangleAmplitude_63 ((uint32_t)0x00000500) /*!< Select max triangle amplitude of 63 */ -#define DAC_TriangleAmplitude_127 ((uint32_t)0x00000600) /*!< Select max triangle amplitude of 127 */ -#define DAC_TriangleAmplitude_255 ((uint32_t)0x00000700) /*!< Select max triangle amplitude of 255 */ -#define DAC_TriangleAmplitude_511 ((uint32_t)0x00000800) /*!< Select max triangle amplitude of 511 */ -#define DAC_TriangleAmplitude_1023 ((uint32_t)0x00000900) /*!< Select max triangle amplitude of 1023 */ -#define DAC_TriangleAmplitude_2047 ((uint32_t)0x00000A00) /*!< Select max triangle amplitude of 2047 */ -#define DAC_TriangleAmplitude_4095 ((uint32_t)0x00000B00) /*!< Select max triangle amplitude of 4095 */ - -#define IS_DAC_LFSR_UNMASK_TRIANGLE_AMPLITUDE(VALUE) (((VALUE) == DAC_LFSRUnmask_Bit0) || \ - ((VALUE) == DAC_LFSRUnmask_Bits1_0) || \ - ((VALUE) == DAC_LFSRUnmask_Bits2_0) || \ - ((VALUE) == DAC_LFSRUnmask_Bits3_0) || \ - ((VALUE) == DAC_LFSRUnmask_Bits4_0) || \ - ((VALUE) == DAC_LFSRUnmask_Bits5_0) || \ - ((VALUE) == DAC_LFSRUnmask_Bits6_0) || \ - ((VALUE) == DAC_LFSRUnmask_Bits7_0) || \ - ((VALUE) == DAC_LFSRUnmask_Bits8_0) || \ - ((VALUE) == DAC_LFSRUnmask_Bits9_0) || \ - ((VALUE) == DAC_LFSRUnmask_Bits10_0) || \ - ((VALUE) == DAC_LFSRUnmask_Bits11_0) || \ - ((VALUE) == DAC_TriangleAmplitude_1) || \ - ((VALUE) == DAC_TriangleAmplitude_3) || \ - ((VALUE) == DAC_TriangleAmplitude_7) || \ - ((VALUE) == DAC_TriangleAmplitude_15) || \ - ((VALUE) == DAC_TriangleAmplitude_31) || \ - ((VALUE) == DAC_TriangleAmplitude_63) || \ - ((VALUE) == DAC_TriangleAmplitude_127) || \ - ((VALUE) == DAC_TriangleAmplitude_255) || \ - ((VALUE) == DAC_TriangleAmplitude_511) || \ - ((VALUE) == DAC_TriangleAmplitude_1023) || \ - ((VALUE) == DAC_TriangleAmplitude_2047) || \ - ((VALUE) == DAC_TriangleAmplitude_4095)) -/** - * @} - */ - -/** @defgroup DAC_output_buffer - * @{ - */ - -#define DAC_OutputBuffer_Enable ((uint32_t)0x00000000) -#define DAC_OutputBuffer_Disable ((uint32_t)0x00000002) -#define IS_DAC_OUTPUT_BUFFER_STATE(STATE) (((STATE) == DAC_OutputBuffer_Enable) || \ - ((STATE) == DAC_OutputBuffer_Disable)) -/** - * @} - */ - -/** @defgroup DAC_Channel_selection - * @{ - */ - -#define DAC_Channel_1 ((uint32_t)0x00000000) -#define DAC_Channel_2 ((uint32_t)0x00000010) -#define IS_DAC_CHANNEL(CHANNEL) (((CHANNEL) == DAC_Channel_1) || \ - ((CHANNEL) == DAC_Channel_2)) -/** - * @} - */ - -/** @defgroup DAC_data_alignement - * @{ - */ - -#define DAC_Align_12b_R ((uint32_t)0x00000000) -#define DAC_Align_12b_L ((uint32_t)0x00000004) -#define DAC_Align_8b_R ((uint32_t)0x00000008) -#define IS_DAC_ALIGN(ALIGN) (((ALIGN) == DAC_Align_12b_R) || \ - ((ALIGN) == DAC_Align_12b_L) || \ - ((ALIGN) == DAC_Align_8b_R)) -/** - * @} - */ - -/** @defgroup DAC_wave_generation - * @{ - */ - -#define DAC_Wave_Noise ((uint32_t)0x00000040) -#define DAC_Wave_Triangle ((uint32_t)0x00000080) -#define IS_DAC_WAVE(WAVE) (((WAVE) == DAC_Wave_Noise) || \ - ((WAVE) == DAC_Wave_Triangle)) -/** - * @} - */ - -/** @defgroup DAC_data - * @{ - */ - -#define IS_DAC_DATA(DATA) ((DATA) <= 0xFFF0) -/** - * @} - */ - -/** @defgroup DAC_interrupts_definition - * @{ - */ -#define DAC_IT_DMAUDR ((uint32_t)0x00002000) -#define IS_DAC_IT(IT) (((IT) == DAC_IT_DMAUDR)) - -/** - * @} - */ - -/** @defgroup DAC_flags_definition - * @{ - */ - -#define DAC_FLAG_DMAUDR ((uint32_t)0x00002000) -#define IS_DAC_FLAG(FLAG) (((FLAG) == DAC_FLAG_DMAUDR)) - -/** - * @} - */ - -/** - * @} - */ - -/* Exported macro ------------------------------------------------------------*/ -/* Exported functions --------------------------------------------------------*/ - -/* Function used to set the DAC configuration to the default reset state *****/ -void DAC_DeInit(void); - -/* DAC channels configuration: trigger, output buffer, data format functions */ -void DAC_Init(uint32_t DAC_Channel, DAC_InitTypeDef* DAC_InitStruct); -void DAC_StructInit(DAC_InitTypeDef* DAC_InitStruct); -void DAC_Cmd(uint32_t DAC_Channel, FunctionalState NewState); -void DAC_SoftwareTriggerCmd(uint32_t DAC_Channel, FunctionalState NewState); -void DAC_DualSoftwareTriggerCmd(FunctionalState NewState); -void DAC_WaveGenerationCmd(uint32_t DAC_Channel, uint32_t DAC_Wave, FunctionalState NewState); -void DAC_SetChannel1Data(uint32_t DAC_Align, uint16_t Data); -void DAC_SetChannel2Data(uint32_t DAC_Align, uint16_t Data); -void DAC_SetDualChannelData(uint32_t DAC_Align, uint16_t Data2, uint16_t Data1); -uint16_t DAC_GetDataOutputValue(uint32_t DAC_Channel); - -/* DMA management functions ***************************************************/ -void DAC_DMACmd(uint32_t DAC_Channel, FunctionalState NewState); - -/* Interrupts and flags management functions **********************************/ -void DAC_ITConfig(uint32_t DAC_Channel, uint32_t DAC_IT, FunctionalState NewState); -FlagStatus DAC_GetFlagStatus(uint32_t DAC_Channel, uint32_t DAC_FLAG); -void DAC_ClearFlag(uint32_t DAC_Channel, uint32_t DAC_FLAG); -ITStatus DAC_GetITStatus(uint32_t DAC_Channel, uint32_t DAC_IT); -void DAC_ClearITPendingBit(uint32_t DAC_Channel, uint32_t DAC_IT); - -#ifdef __cplusplus -} -#endif - -#endif /*__STM32F4xx_DAC_H */ - -/** - * @} - */ - -/** - * @} - */ - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/stm/lib/stm32f4xx_dma.c b/stm/lib/stm32f4xx_dma.c deleted file mode 100644 index ef86764ea..000000000 --- a/stm/lib/stm32f4xx_dma.c +++ /dev/null @@ -1,1301 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f4xx_dma.c - * @author MCD Application Team - * @version V1.3.0 - * @date 08-November-2013 - * @brief This file provides firmware functions to manage the following - * functionalities of the Direct Memory Access controller (DMA): - * + Initialization and Configuration - * + Data Counter - * + Double Buffer mode configuration and command - * + Interrupts and flags management - * - @verbatim - =============================================================================== - ##### How to use this driver ##### - =============================================================================== - [..] - (#) Enable The DMA controller clock using RCC_AHB1PeriphResetCmd(RCC_AHB1Periph_DMA1, ENABLE) - function for DMA1 or using RCC_AHB1PeriphResetCmd(RCC_AHB1Periph_DMA2, ENABLE) - function for DMA2. - - (#) Enable and configure the peripheral to be connected to the DMA Stream - (except for internal SRAM / FLASH memories: no initialization is - necessary). - - (#) For a given Stream, program the required configuration through following parameters: - Source and Destination addresses, Transfer Direction, Transfer size, Source and Destination - data formats, Circular or Normal mode, Stream Priority level, Source and Destination - Incrementation mode, FIFO mode and its Threshold (if needed), Burst - mode for Source and/or Destination (if needed) using the DMA_Init() function. - To avoid filling unneccessary fields, you can call DMA_StructInit() function - to initialize a given structure with default values (reset values), the modify - only necessary fields - (ie. Source and Destination addresses, Transfer size and Data Formats). - - (#) Enable the NVIC and the corresponding interrupt(s) using the function - DMA_ITConfig() if you need to use DMA interrupts. - - (#) Optionally, if the Circular mode is enabled, you can use the Double buffer mode by configuring - the second Memory address and the first Memory to be used through the function - DMA_DoubleBufferModeConfig(). Then enable the Double buffer mode through the function - DMA_DoubleBufferModeCmd(). These operations must be done before step 6. - - (#) Enable the DMA stream using the DMA_Cmd() function. - - (#) Activate the needed Stream Request using PPP_DMACmd() function for - any PPP peripheral except internal SRAM and FLASH (ie. SPI, USART ...) - The function allowing this operation is provided in each PPP peripheral - driver (ie. SPI_DMACmd for SPI peripheral). - Once the Stream is enabled, it is not possible to modify its configuration - unless the stream is stopped and disabled. - After enabling the Stream, it is advised to monitor the EN bit status using - the function DMA_GetCmdStatus(). In case of configuration errors or bus errors - this bit will remain reset and all transfers on this Stream will remain on hold. - - (#) Optionally, you can configure the number of data to be transferred - when the Stream is disabled (ie. after each Transfer Complete event - or when a Transfer Error occurs) using the function DMA_SetCurrDataCounter(). - And you can get the number of remaining data to be transferred using - the function DMA_GetCurrDataCounter() at run time (when the DMA Stream is - enabled and running). - - (#) To control DMA events you can use one of the following two methods: - (##) Check on DMA Stream flags using the function DMA_GetFlagStatus(). - (##) Use DMA interrupts through the function DMA_ITConfig() at initialization - phase and DMA_GetITStatus() function into interrupt routines in - communication phase. - [..] - After checking on a flag you should clear it using DMA_ClearFlag() - function. And after checking on an interrupt event you should - clear it using DMA_ClearITPendingBit() function. - - (#) Optionally, if Circular mode and Double Buffer mode are enabled, you can modify - the Memory Addresses using the function DMA_MemoryTargetConfig(). Make sure that - the Memory Address to be modified is not the one currently in use by DMA Stream. - This condition can be monitored using the function DMA_GetCurrentMemoryTarget(). - - (#) Optionally, Pause-Resume operations may be performed: - The DMA_Cmd() function may be used to perform Pause-Resume operation. - When a transfer is ongoing, calling this function to disable the - Stream will cause the transfer to be paused. All configuration registers - and the number of remaining data will be preserved. When calling again - this function to re-enable the Stream, the transfer will be resumed from - the point where it was paused. - - -@- Memory-to-Memory transfer is possible by setting the address of the memory into - the Peripheral registers. In this mode, Circular mode and Double Buffer mode - are not allowed. - - -@- The FIFO is used mainly to reduce bus usage and to allow data - packing/unpacking: it is possible to set different Data Sizes for - the Peripheral and the Memory (ie. you can set Half-Word data size - for the peripheral to access its data register and set Word data size - for the Memory to gain in access time. Each two Half-words will be - packed and written in a single access to a Word in the Memory). - - -@- When FIFO is disabled, it is not allowed to configure different - Data Sizes for Source and Destination. In this case the Peripheral - Data Size will be applied to both Source and Destination. - - @endverbatim - ****************************************************************************** - * @attention - * - *

© COPYRIGHT 2013 STMicroelectronics

- * - * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License"); - * You may not use this file except in compliance with the License. - * You may obtain a copy of the License at: - * - * http://www.st.com/software_license_agreement_liberty_v2 - * - * Unless required by applicable law or agreed to in writing, software - * distributed under the License is distributed on an "AS IS" BASIS, - * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - * See the License for the specific language governing permissions and - * limitations under the License. - * - ****************************************************************************** - */ - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx_dma.h" -#include "stm32f4xx_rcc.h" - -/** @addtogroup STM32F4xx_StdPeriph_Driver - * @{ - */ - -/** @defgroup DMA - * @brief DMA driver modules - * @{ - */ - -/* Private typedef -----------------------------------------------------------*/ -/* Private define ------------------------------------------------------------*/ - -/* Masks Definition */ -#define TRANSFER_IT_ENABLE_MASK (uint32_t)(DMA_SxCR_TCIE | DMA_SxCR_HTIE | \ - DMA_SxCR_TEIE | DMA_SxCR_DMEIE) - -#define DMA_Stream0_IT_MASK (uint32_t)(DMA_LISR_FEIF0 | DMA_LISR_DMEIF0 | \ - DMA_LISR_TEIF0 | DMA_LISR_HTIF0 | \ - DMA_LISR_TCIF0) - -#define DMA_Stream1_IT_MASK (uint32_t)(DMA_Stream0_IT_MASK << 6) -#define DMA_Stream2_IT_MASK (uint32_t)(DMA_Stream0_IT_MASK << 16) -#define DMA_Stream3_IT_MASK (uint32_t)(DMA_Stream0_IT_MASK << 22) -#define DMA_Stream4_IT_MASK (uint32_t)(DMA_Stream0_IT_MASK | (uint32_t)0x20000000) -#define DMA_Stream5_IT_MASK (uint32_t)(DMA_Stream1_IT_MASK | (uint32_t)0x20000000) -#define DMA_Stream6_IT_MASK (uint32_t)(DMA_Stream2_IT_MASK | (uint32_t)0x20000000) -#define DMA_Stream7_IT_MASK (uint32_t)(DMA_Stream3_IT_MASK | (uint32_t)0x20000000) -#define TRANSFER_IT_MASK (uint32_t)0x0F3C0F3C -#define HIGH_ISR_MASK (uint32_t)0x20000000 -#define RESERVED_MASK (uint32_t)0x0F7D0F7D - -/* Private macro -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -/* Private function prototypes -----------------------------------------------*/ -/* Private functions ---------------------------------------------------------*/ - - -/** @defgroup DMA_Private_Functions - * @{ - */ - -/** @defgroup DMA_Group1 Initialization and Configuration functions - * @brief Initialization and Configuration functions - * -@verbatim - =============================================================================== - ##### Initialization and Configuration functions ##### - =============================================================================== - [..] - This subsection provides functions allowing to initialize the DMA Stream source - and destination addresses, incrementation and data sizes, transfer direction, - buffer size, circular/normal mode selection, memory-to-memory mode selection - and Stream priority value. - [..] - The DMA_Init() function follows the DMA configuration procedures as described in - reference manual (RM0090) except the first point: waiting on EN bit to be reset. - This condition should be checked by user application using the function DMA_GetCmdStatus() - before calling the DMA_Init() function. - -@endverbatim - * @{ - */ - -/** - * @brief Deinitialize the DMAy Streamx registers to their default reset values. - * @param DMAy_Streamx: where y can be 1 or 2 to select the DMA and x can be 0 - * to 7 to select the DMA Stream. - * @retval None - */ -void DMA_DeInit(DMA_Stream_TypeDef* DMAy_Streamx) -{ - /* Check the parameters */ - assert_param(IS_DMA_ALL_PERIPH(DMAy_Streamx)); - - /* Disable the selected DMAy Streamx */ - DMAy_Streamx->CR &= ~((uint32_t)DMA_SxCR_EN); - - /* Reset DMAy Streamx control register */ - DMAy_Streamx->CR = 0; - - /* Reset DMAy Streamx Number of Data to Transfer register */ - DMAy_Streamx->NDTR = 0; - - /* Reset DMAy Streamx peripheral address register */ - DMAy_Streamx->PAR = 0; - - /* Reset DMAy Streamx memory 0 address register */ - DMAy_Streamx->M0AR = 0; - - /* Reset DMAy Streamx memory 1 address register */ - DMAy_Streamx->M1AR = 0; - - /* Reset DMAy Streamx FIFO control register */ - DMAy_Streamx->FCR = (uint32_t)0x00000021; - - /* Reset interrupt pending bits for the selected stream */ - if (DMAy_Streamx == DMA1_Stream0) - { - /* Reset interrupt pending bits for DMA1 Stream0 */ - DMA1->LIFCR = DMA_Stream0_IT_MASK; - } - else if (DMAy_Streamx == DMA1_Stream1) - { - /* Reset interrupt pending bits for DMA1 Stream1 */ - DMA1->LIFCR = DMA_Stream1_IT_MASK; - } - else if (DMAy_Streamx == DMA1_Stream2) - { - /* Reset interrupt pending bits for DMA1 Stream2 */ - DMA1->LIFCR = DMA_Stream2_IT_MASK; - } - else if (DMAy_Streamx == DMA1_Stream3) - { - /* Reset interrupt pending bits for DMA1 Stream3 */ - DMA1->LIFCR = DMA_Stream3_IT_MASK; - } - else if (DMAy_Streamx == DMA1_Stream4) - { - /* Reset interrupt pending bits for DMA1 Stream4 */ - DMA1->HIFCR = DMA_Stream4_IT_MASK; - } - else if (DMAy_Streamx == DMA1_Stream5) - { - /* Reset interrupt pending bits for DMA1 Stream5 */ - DMA1->HIFCR = DMA_Stream5_IT_MASK; - } - else if (DMAy_Streamx == DMA1_Stream6) - { - /* Reset interrupt pending bits for DMA1 Stream6 */ - DMA1->HIFCR = (uint32_t)DMA_Stream6_IT_MASK; - } - else if (DMAy_Streamx == DMA1_Stream7) - { - /* Reset interrupt pending bits for DMA1 Stream7 */ - DMA1->HIFCR = DMA_Stream7_IT_MASK; - } - else if (DMAy_Streamx == DMA2_Stream0) - { - /* Reset interrupt pending bits for DMA2 Stream0 */ - DMA2->LIFCR = DMA_Stream0_IT_MASK; - } - else if (DMAy_Streamx == DMA2_Stream1) - { - /* Reset interrupt pending bits for DMA2 Stream1 */ - DMA2->LIFCR = DMA_Stream1_IT_MASK; - } - else if (DMAy_Streamx == DMA2_Stream2) - { - /* Reset interrupt pending bits for DMA2 Stream2 */ - DMA2->LIFCR = DMA_Stream2_IT_MASK; - } - else if (DMAy_Streamx == DMA2_Stream3) - { - /* Reset interrupt pending bits for DMA2 Stream3 */ - DMA2->LIFCR = DMA_Stream3_IT_MASK; - } - else if (DMAy_Streamx == DMA2_Stream4) - { - /* Reset interrupt pending bits for DMA2 Stream4 */ - DMA2->HIFCR = DMA_Stream4_IT_MASK; - } - else if (DMAy_Streamx == DMA2_Stream5) - { - /* Reset interrupt pending bits for DMA2 Stream5 */ - DMA2->HIFCR = DMA_Stream5_IT_MASK; - } - else if (DMAy_Streamx == DMA2_Stream6) - { - /* Reset interrupt pending bits for DMA2 Stream6 */ - DMA2->HIFCR = DMA_Stream6_IT_MASK; - } - else - { - if (DMAy_Streamx == DMA2_Stream7) - { - /* Reset interrupt pending bits for DMA2 Stream7 */ - DMA2->HIFCR = DMA_Stream7_IT_MASK; - } - } -} - -/** - * @brief Initializes the DMAy Streamx according to the specified parameters in - * the DMA_InitStruct structure. - * @note Before calling this function, it is recommended to check that the Stream - * is actually disabled using the function DMA_GetCmdStatus(). - * @param DMAy_Streamx: where y can be 1 or 2 to select the DMA and x can be 0 - * to 7 to select the DMA Stream. - * @param DMA_InitStruct: pointer to a DMA_InitTypeDef structure that contains - * the configuration information for the specified DMA Stream. - * @retval None - */ -void DMA_Init(DMA_Stream_TypeDef* DMAy_Streamx, DMA_InitTypeDef* DMA_InitStruct) -{ - uint32_t tmpreg = 0; - - /* Check the parameters */ - assert_param(IS_DMA_ALL_PERIPH(DMAy_Streamx)); - assert_param(IS_DMA_CHANNEL(DMA_InitStruct->DMA_Channel)); - assert_param(IS_DMA_DIRECTION(DMA_InitStruct->DMA_DIR)); - assert_param(IS_DMA_BUFFER_SIZE(DMA_InitStruct->DMA_BufferSize)); - assert_param(IS_DMA_PERIPHERAL_INC_STATE(DMA_InitStruct->DMA_PeripheralInc)); - assert_param(IS_DMA_MEMORY_INC_STATE(DMA_InitStruct->DMA_MemoryInc)); - assert_param(IS_DMA_PERIPHERAL_DATA_SIZE(DMA_InitStruct->DMA_PeripheralDataSize)); - assert_param(IS_DMA_MEMORY_DATA_SIZE(DMA_InitStruct->DMA_MemoryDataSize)); - assert_param(IS_DMA_MODE(DMA_InitStruct->DMA_Mode)); - assert_param(IS_DMA_PRIORITY(DMA_InitStruct->DMA_Priority)); - assert_param(IS_DMA_FIFO_MODE_STATE(DMA_InitStruct->DMA_FIFOMode)); - assert_param(IS_DMA_FIFO_THRESHOLD(DMA_InitStruct->DMA_FIFOThreshold)); - assert_param(IS_DMA_MEMORY_BURST(DMA_InitStruct->DMA_MemoryBurst)); - assert_param(IS_DMA_PERIPHERAL_BURST(DMA_InitStruct->DMA_PeripheralBurst)); - - /*------------------------- DMAy Streamx CR Configuration ------------------*/ - /* Get the DMAy_Streamx CR value */ - tmpreg = DMAy_Streamx->CR; - - /* Clear CHSEL, MBURST, PBURST, PL, MSIZE, PSIZE, MINC, PINC, CIRC and DIR bits */ - tmpreg &= ((uint32_t)~(DMA_SxCR_CHSEL | DMA_SxCR_MBURST | DMA_SxCR_PBURST | \ - DMA_SxCR_PL | DMA_SxCR_MSIZE | DMA_SxCR_PSIZE | \ - DMA_SxCR_MINC | DMA_SxCR_PINC | DMA_SxCR_CIRC | \ - DMA_SxCR_DIR)); - - /* Configure DMAy Streamx: */ - /* Set CHSEL bits according to DMA_CHSEL value */ - /* Set DIR bits according to DMA_DIR value */ - /* Set PINC bit according to DMA_PeripheralInc value */ - /* Set MINC bit according to DMA_MemoryInc value */ - /* Set PSIZE bits according to DMA_PeripheralDataSize value */ - /* Set MSIZE bits according to DMA_MemoryDataSize value */ - /* Set CIRC bit according to DMA_Mode value */ - /* Set PL bits according to DMA_Priority value */ - /* Set MBURST bits according to DMA_MemoryBurst value */ - /* Set PBURST bits according to DMA_PeripheralBurst value */ - tmpreg |= DMA_InitStruct->DMA_Channel | DMA_InitStruct->DMA_DIR | - DMA_InitStruct->DMA_PeripheralInc | DMA_InitStruct->DMA_MemoryInc | - DMA_InitStruct->DMA_PeripheralDataSize | DMA_InitStruct->DMA_MemoryDataSize | - DMA_InitStruct->DMA_Mode | DMA_InitStruct->DMA_Priority | - DMA_InitStruct->DMA_MemoryBurst | DMA_InitStruct->DMA_PeripheralBurst; - - /* Write to DMAy Streamx CR register */ - DMAy_Streamx->CR = tmpreg; - - /*------------------------- DMAy Streamx FCR Configuration -----------------*/ - /* Get the DMAy_Streamx FCR value */ - tmpreg = DMAy_Streamx->FCR; - - /* Clear DMDIS and FTH bits */ - tmpreg &= (uint32_t)~(DMA_SxFCR_DMDIS | DMA_SxFCR_FTH); - - /* Configure DMAy Streamx FIFO: - Set DMDIS bits according to DMA_FIFOMode value - Set FTH bits according to DMA_FIFOThreshold value */ - tmpreg |= DMA_InitStruct->DMA_FIFOMode | DMA_InitStruct->DMA_FIFOThreshold; - - /* Write to DMAy Streamx CR */ - DMAy_Streamx->FCR = tmpreg; - - /*------------------------- DMAy Streamx NDTR Configuration ----------------*/ - /* Write to DMAy Streamx NDTR register */ - DMAy_Streamx->NDTR = DMA_InitStruct->DMA_BufferSize; - - /*------------------------- DMAy Streamx PAR Configuration -----------------*/ - /* Write to DMAy Streamx PAR */ - DMAy_Streamx->PAR = DMA_InitStruct->DMA_PeripheralBaseAddr; - - /*------------------------- DMAy Streamx M0AR Configuration ----------------*/ - /* Write to DMAy Streamx M0AR */ - DMAy_Streamx->M0AR = DMA_InitStruct->DMA_Memory0BaseAddr; -} - -/** - * @brief Fills each DMA_InitStruct member with its default value. - * @param DMA_InitStruct : pointer to a DMA_InitTypeDef structure which will - * be initialized. - * @retval None - */ -void DMA_StructInit(DMA_InitTypeDef* DMA_InitStruct) -{ - /*-------------- Reset DMA init structure parameters values ----------------*/ - /* Initialize the DMA_Channel member */ - DMA_InitStruct->DMA_Channel = 0; - - /* Initialize the DMA_PeripheralBaseAddr member */ - DMA_InitStruct->DMA_PeripheralBaseAddr = 0; - - /* Initialize the DMA_Memory0BaseAddr member */ - DMA_InitStruct->DMA_Memory0BaseAddr = 0; - - /* Initialize the DMA_DIR member */ - DMA_InitStruct->DMA_DIR = DMA_DIR_PeripheralToMemory; - - /* Initialize the DMA_BufferSize member */ - DMA_InitStruct->DMA_BufferSize = 0; - - /* Initialize the DMA_PeripheralInc member */ - DMA_InitStruct->DMA_PeripheralInc = DMA_PeripheralInc_Disable; - - /* Initialize the DMA_MemoryInc member */ - DMA_InitStruct->DMA_MemoryInc = DMA_MemoryInc_Disable; - - /* Initialize the DMA_PeripheralDataSize member */ - DMA_InitStruct->DMA_PeripheralDataSize = DMA_PeripheralDataSize_Byte; - - /* Initialize the DMA_MemoryDataSize member */ - DMA_InitStruct->DMA_MemoryDataSize = DMA_MemoryDataSize_Byte; - - /* Initialize the DMA_Mode member */ - DMA_InitStruct->DMA_Mode = DMA_Mode_Normal; - - /* Initialize the DMA_Priority member */ - DMA_InitStruct->DMA_Priority = DMA_Priority_Low; - - /* Initialize the DMA_FIFOMode member */ - DMA_InitStruct->DMA_FIFOMode = DMA_FIFOMode_Disable; - - /* Initialize the DMA_FIFOThreshold member */ - DMA_InitStruct->DMA_FIFOThreshold = DMA_FIFOThreshold_1QuarterFull; - - /* Initialize the DMA_MemoryBurst member */ - DMA_InitStruct->DMA_MemoryBurst = DMA_MemoryBurst_Single; - - /* Initialize the DMA_PeripheralBurst member */ - DMA_InitStruct->DMA_PeripheralBurst = DMA_PeripheralBurst_Single; -} - -/** - * @brief Enables or disables the specified DMAy Streamx. - * @param DMAy_Streamx: where y can be 1 or 2 to select the DMA and x can be 0 - * to 7 to select the DMA Stream. - * @param NewState: new state of the DMAy Streamx. - * This parameter can be: ENABLE or DISABLE. - * - * @note This function may be used to perform Pause-Resume operation. When a - * transfer is ongoing, calling this function to disable the Stream will - * cause the transfer to be paused. All configuration registers and the - * number of remaining data will be preserved. When calling again this - * function to re-enable the Stream, the transfer will be resumed from - * the point where it was paused. - * - * @note After configuring the DMA Stream (DMA_Init() function) and enabling the - * stream, it is recommended to check (or wait until) the DMA Stream is - * effectively enabled. A Stream may remain disabled if a configuration - * parameter is wrong. - * After disabling a DMA Stream, it is also recommended to check (or wait - * until) the DMA Stream is effectively disabled. If a Stream is disabled - * while a data transfer is ongoing, the current data will be transferred - * and the Stream will be effectively disabled only after the transfer of - * this single data is finished. - * - * @retval None - */ -void DMA_Cmd(DMA_Stream_TypeDef* DMAy_Streamx, FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_DMA_ALL_PERIPH(DMAy_Streamx)); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - - if (NewState != DISABLE) - { - /* Enable the selected DMAy Streamx by setting EN bit */ - DMAy_Streamx->CR |= (uint32_t)DMA_SxCR_EN; - } - else - { - /* Disable the selected DMAy Streamx by clearing EN bit */ - DMAy_Streamx->CR &= ~(uint32_t)DMA_SxCR_EN; - } -} - -/** - * @brief Configures, when the PINC (Peripheral Increment address mode) bit is - * set, if the peripheral address should be incremented with the data - * size (configured with PSIZE bits) or by a fixed offset equal to 4 - * (32-bit aligned addresses). - * - * @note This function has no effect if the Peripheral Increment mode is disabled. - * - * @param DMAy_Streamx: where y can be 1 or 2 to select the DMA and x can be 0 - * to 7 to select the DMA Stream. - * @param DMA_Pincos: specifies the Peripheral increment offset size. - * This parameter can be one of the following values: - * @arg DMA_PINCOS_Psize: Peripheral address increment is done - * accordingly to PSIZE parameter. - * @arg DMA_PINCOS_WordAligned: Peripheral address increment offset is - * fixed to 4 (32-bit aligned addresses). - * @retval None - */ -void DMA_PeriphIncOffsetSizeConfig(DMA_Stream_TypeDef* DMAy_Streamx, uint32_t DMA_Pincos) -{ - /* Check the parameters */ - assert_param(IS_DMA_ALL_PERIPH(DMAy_Streamx)); - assert_param(IS_DMA_PINCOS_SIZE(DMA_Pincos)); - - /* Check the needed Peripheral increment offset */ - if(DMA_Pincos != DMA_PINCOS_Psize) - { - /* Configure DMA_SxCR_PINCOS bit with the input parameter */ - DMAy_Streamx->CR |= (uint32_t)DMA_SxCR_PINCOS; - } - else - { - /* Clear the PINCOS bit: Peripheral address incremented according to PSIZE */ - DMAy_Streamx->CR &= ~(uint32_t)DMA_SxCR_PINCOS; - } -} - -/** - * @brief Configures, when the DMAy Streamx is disabled, the flow controller for - * the next transactions (Peripheral or Memory). - * - * @note Before enabling this feature, check if the used peripheral supports - * the Flow Controller mode or not. - * - * @param DMAy_Streamx: where y can be 1 or 2 to select the DMA and x can be 0 - * to 7 to select the DMA Stream. - * @param DMA_FlowCtrl: specifies the DMA flow controller. - * This parameter can be one of the following values: - * @arg DMA_FlowCtrl_Memory: DMAy_Streamx transactions flow controller is - * the DMA controller. - * @arg DMA_FlowCtrl_Peripheral: DMAy_Streamx transactions flow controller - * is the peripheral. - * @retval None - */ -void DMA_FlowControllerConfig(DMA_Stream_TypeDef* DMAy_Streamx, uint32_t DMA_FlowCtrl) -{ - /* Check the parameters */ - assert_param(IS_DMA_ALL_PERIPH(DMAy_Streamx)); - assert_param(IS_DMA_FLOW_CTRL(DMA_FlowCtrl)); - - /* Check the needed flow controller */ - if(DMA_FlowCtrl != DMA_FlowCtrl_Memory) - { - /* Configure DMA_SxCR_PFCTRL bit with the input parameter */ - DMAy_Streamx->CR |= (uint32_t)DMA_SxCR_PFCTRL; - } - else - { - /* Clear the PFCTRL bit: Memory is the flow controller */ - DMAy_Streamx->CR &= ~(uint32_t)DMA_SxCR_PFCTRL; - } -} -/** - * @} - */ - -/** @defgroup DMA_Group2 Data Counter functions - * @brief Data Counter functions - * -@verbatim - =============================================================================== - ##### Data Counter functions ##### - =============================================================================== - [..] - This subsection provides function allowing to configure and read the buffer size - (number of data to be transferred). - [..] - The DMA data counter can be written only when the DMA Stream is disabled - (ie. after transfer complete event). - [..] - The following function can be used to write the Stream data counter value: - (+) void DMA_SetCurrDataCounter(DMA_Stream_TypeDef* DMAy_Streamx, uint16_t Counter); - -@- It is advised to use this function rather than DMA_Init() in situations - where only the Data buffer needs to be reloaded. - -@- If the Source and Destination Data Sizes are different, then the value - written in data counter, expressing the number of transfers, is relative - to the number of transfers from the Peripheral point of view. - ie. If Memory data size is Word, Peripheral data size is Half-Words, - then the value to be configured in the data counter is the number - of Half-Words to be transferred from/to the peripheral. - [..] - The DMA data counter can be read to indicate the number of remaining transfers for - the relative DMA Stream. This counter is decremented at the end of each data - transfer and when the transfer is complete: - (+) If Normal mode is selected: the counter is set to 0. - (+) If Circular mode is selected: the counter is reloaded with the initial value - (configured before enabling the DMA Stream) - [..] - The following function can be used to read the Stream data counter value: - (+) uint16_t DMA_GetCurrDataCounter(DMA_Stream_TypeDef* DMAy_Streamx); - -@endverbatim - * @{ - */ - -/** - * @brief Writes the number of data units to be transferred on the DMAy Streamx. - * @param DMAy_Streamx: where y can be 1 or 2 to select the DMA and x can be 0 - * to 7 to select the DMA Stream. - * @param Counter: Number of data units to be transferred (from 0 to 65535) - * Number of data items depends only on the Peripheral data format. - * - * @note If Peripheral data format is Bytes: number of data units is equal - * to total number of bytes to be transferred. - * - * @note If Peripheral data format is Half-Word: number of data units is - * equal to total number of bytes to be transferred / 2. - * - * @note If Peripheral data format is Word: number of data units is equal - * to total number of bytes to be transferred / 4. - * - * @note In Memory-to-Memory transfer mode, the memory buffer pointed by - * DMAy_SxPAR register is considered as Peripheral. - * - * @retval The number of remaining data units in the current DMAy Streamx transfer. - */ -void DMA_SetCurrDataCounter(DMA_Stream_TypeDef* DMAy_Streamx, uint16_t Counter) -{ - /* Check the parameters */ - assert_param(IS_DMA_ALL_PERIPH(DMAy_Streamx)); - - /* Write the number of data units to be transferred */ - DMAy_Streamx->NDTR = (uint16_t)Counter; -} - -/** - * @brief Returns the number of remaining data units in the current DMAy Streamx transfer. - * @param DMAy_Streamx: where y can be 1 or 2 to select the DMA and x can be 0 - * to 7 to select the DMA Stream. - * @retval The number of remaining data units in the current DMAy Streamx transfer. - */ -uint16_t DMA_GetCurrDataCounter(DMA_Stream_TypeDef* DMAy_Streamx) -{ - /* Check the parameters */ - assert_param(IS_DMA_ALL_PERIPH(DMAy_Streamx)); - - /* Return the number of remaining data units for DMAy Streamx */ - return ((uint16_t)(DMAy_Streamx->NDTR)); -} -/** - * @} - */ - -/** @defgroup DMA_Group3 Double Buffer mode functions - * @brief Double Buffer mode functions - * -@verbatim - =============================================================================== - ##### Double Buffer mode functions ##### - =============================================================================== - [..] - This subsection provides function allowing to configure and control the double - buffer mode parameters. - - [..] - The Double Buffer mode can be used only when Circular mode is enabled. - The Double Buffer mode cannot be used when transferring data from Memory to Memory. - - [..] - The Double Buffer mode allows to set two different Memory addresses from/to which - the DMA controller will access alternatively (after completing transfer to/from - target memory 0, it will start transfer to/from target memory 1). - This allows to reduce software overhead for double buffering and reduce the CPU - access time. - - [..] - Two functions must be called before calling the DMA_Init() function: - (+) void DMA_DoubleBufferModeConfig(DMA_Stream_TypeDef* DMAy_Streamx, - uint32_t Memory1BaseAddr, uint32_t DMA_CurrentMemory); - (+) void DMA_DoubleBufferModeCmd(DMA_Stream_TypeDef* DMAy_Streamx, FunctionalState NewState); - - [..] - DMA_DoubleBufferModeConfig() is called to configure the Memory 1 base address - and the first Memory target from/to which the transfer will start after - enabling the DMA Stream. Then DMA_DoubleBufferModeCmd() must be called - to enable the Double Buffer mode (or disable it when it should not be used). - - [..] - Two functions can be called dynamically when the transfer is ongoing (or when the DMA Stream is - stopped) to modify on of the target Memories addresses or to check wich Memory target is currently - used: - (+) void DMA_MemoryTargetConfig(DMA_Stream_TypeDef* DMAy_Streamx, - uint32_t MemoryBaseAddr, uint32_t DMA_MemoryTarget); - (+) uint32_t DMA_GetCurrentMemoryTarget(DMA_Stream_TypeDef* DMAy_Streamx); - - [..] - DMA_MemoryTargetConfig() can be called to modify the base address of one of - the two target Memories. - The Memory of which the base address will be modified must not be currently - be used by the DMA Stream (ie. if the DMA Stream is currently transferring - from Memory 1 then you can only modify base address of target Memory 0 and vice versa). - To check this condition, it is recommended to use the function DMA_GetCurrentMemoryTarget() which - returns the index of the Memory target currently in use by the DMA Stream. - -@endverbatim - * @{ - */ - -/** - * @brief Configures, when the DMAy Streamx is disabled, the double buffer mode - * and the current memory target. - * @param DMAy_Streamx: where y can be 1 or 2 to select the DMA and x can be 0 - * to 7 to select the DMA Stream. - * @param Memory1BaseAddr: the base address of the second buffer (Memory 1) - * @param DMA_CurrentMemory: specifies which memory will be first buffer for - * the transactions when the Stream will be enabled. - * This parameter can be one of the following values: - * @arg DMA_Memory_0: Memory 0 is the current buffer. - * @arg DMA_Memory_1: Memory 1 is the current buffer. - * - * @note Memory0BaseAddr is set by the DMA structure configuration in DMA_Init(). - * - * @retval None - */ -void DMA_DoubleBufferModeConfig(DMA_Stream_TypeDef* DMAy_Streamx, uint32_t Memory1BaseAddr, - uint32_t DMA_CurrentMemory) -{ - /* Check the parameters */ - assert_param(IS_DMA_ALL_PERIPH(DMAy_Streamx)); - assert_param(IS_DMA_CURRENT_MEM(DMA_CurrentMemory)); - - if (DMA_CurrentMemory != DMA_Memory_0) - { - /* Set Memory 1 as current memory address */ - DMAy_Streamx->CR |= (uint32_t)(DMA_SxCR_CT); - } - else - { - /* Set Memory 0 as current memory address */ - DMAy_Streamx->CR &= ~(uint32_t)(DMA_SxCR_CT); - } - - /* Write to DMAy Streamx M1AR */ - DMAy_Streamx->M1AR = Memory1BaseAddr; -} - -/** - * @brief Enables or disables the double buffer mode for the selected DMA stream. - * @note This function can be called only when the DMA Stream is disabled. - * @param DMAy_Streamx: where y can be 1 or 2 to select the DMA and x can be 0 - * to 7 to select the DMA Stream. - * @param NewState: new state of the DMAy Streamx double buffer mode. - * This parameter can be: ENABLE or DISABLE. - * @retval None - */ -void DMA_DoubleBufferModeCmd(DMA_Stream_TypeDef* DMAy_Streamx, FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_DMA_ALL_PERIPH(DMAy_Streamx)); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - - /* Configure the Double Buffer mode */ - if (NewState != DISABLE) - { - /* Enable the Double buffer mode */ - DMAy_Streamx->CR |= (uint32_t)DMA_SxCR_DBM; - } - else - { - /* Disable the Double buffer mode */ - DMAy_Streamx->CR &= ~(uint32_t)DMA_SxCR_DBM; - } -} - -/** - * @brief Configures the Memory address for the next buffer transfer in double - * buffer mode (for dynamic use). This function can be called when the - * DMA Stream is enabled and when the transfer is ongoing. - * @param DMAy_Streamx: where y can be 1 or 2 to select the DMA and x can be 0 - * to 7 to select the DMA Stream. - * @param MemoryBaseAddr: The base address of the target memory buffer - * @param DMA_MemoryTarget: Next memory target to be used. - * This parameter can be one of the following values: - * @arg DMA_Memory_0: To use the memory address 0 - * @arg DMA_Memory_1: To use the memory address 1 - * - * @note It is not allowed to modify the Base Address of a target Memory when - * this target is involved in the current transfer. ie. If the DMA Stream - * is currently transferring to/from Memory 1, then it not possible to - * modify Base address of Memory 1, but it is possible to modify Base - * address of Memory 0. - * To know which Memory is currently used, you can use the function - * DMA_GetCurrentMemoryTarget(). - * - * @retval None - */ -void DMA_MemoryTargetConfig(DMA_Stream_TypeDef* DMAy_Streamx, uint32_t MemoryBaseAddr, - uint32_t DMA_MemoryTarget) -{ - /* Check the parameters */ - assert_param(IS_DMA_ALL_PERIPH(DMAy_Streamx)); - assert_param(IS_DMA_CURRENT_MEM(DMA_MemoryTarget)); - - /* Check the Memory target to be configured */ - if (DMA_MemoryTarget != DMA_Memory_0) - { - /* Write to DMAy Streamx M1AR */ - DMAy_Streamx->M1AR = MemoryBaseAddr; - } - else - { - /* Write to DMAy Streamx M0AR */ - DMAy_Streamx->M0AR = MemoryBaseAddr; - } -} - -/** - * @brief Returns the current memory target used by double buffer transfer. - * @param DMAy_Streamx: where y can be 1 or 2 to select the DMA and x can be 0 - * to 7 to select the DMA Stream. - * @retval The memory target number: 0 for Memory0 or 1 for Memory1. - */ -uint32_t DMA_GetCurrentMemoryTarget(DMA_Stream_TypeDef* DMAy_Streamx) -{ - uint32_t tmp = 0; - - /* Check the parameters */ - assert_param(IS_DMA_ALL_PERIPH(DMAy_Streamx)); - - /* Get the current memory target */ - if ((DMAy_Streamx->CR & DMA_SxCR_CT) != 0) - { - /* Current memory buffer used is Memory 1 */ - tmp = 1; - } - else - { - /* Current memory buffer used is Memory 0 */ - tmp = 0; - } - return tmp; -} -/** - * @} - */ - -/** @defgroup DMA_Group4 Interrupts and flags management functions - * @brief Interrupts and flags management functions - * -@verbatim - =============================================================================== - ##### Interrupts and flags management functions ##### - =============================================================================== - [..] - This subsection provides functions allowing to - (+) Check the DMA enable status - (+) Check the FIFO status - (+) Configure the DMA Interrupts sources and check or clear the flags or - pending bits status. - - [..] - (#) DMA Enable status: - After configuring the DMA Stream (DMA_Init() function) and enabling - the stream, it is recommended to check (or wait until) the DMA Stream - is effectively enabled. A Stream may remain disabled if a configuration - parameter is wrong. After disabling a DMA Stream, it is also recommended - to check (or wait until) the DMA Stream is effectively disabled. - If a Stream is disabled while a data transfer is ongoing, the current - data will be transferred and the Stream will be effectively disabled - only after this data transfer completion. - To monitor this state it is possible to use the following function: - (++) FunctionalState DMA_GetCmdStatus(DMA_Stream_TypeDef* DMAy_Streamx); - - (#) FIFO Status: - It is possible to monitor the FIFO status when a transfer is ongoing - using the following function: - (++) uint32_t DMA_GetFIFOStatus(DMA_Stream_TypeDef* DMAy_Streamx); - - (#) DMA Interrupts and Flags: - The user should identify which mode will be used in his application - to manage the DMA controller events: Polling mode or Interrupt mode. - - *** Polling Mode *** - ==================== - [..] - Each DMA stream can be managed through 4 event Flags: - (x : DMA Stream number ) - (#) DMA_FLAG_FEIFx : to indicate that a FIFO Mode Transfer Error event occurred. - (#) DMA_FLAG_DMEIFx : to indicate that a Direct Mode Transfer Error event occurred. - (#) DMA_FLAG_TEIFx : to indicate that a Transfer Error event occurred. - (#) DMA_FLAG_HTIFx : to indicate that a Half-Transfer Complete event occurred. - (#) DMA_FLAG_TCIFx : to indicate that a Transfer Complete event occurred . - [..] - In this Mode it is advised to use the following functions: - (+) FlagStatus DMA_GetFlagStatus(DMA_Stream_TypeDef* DMAy_Streamx, uint32_t DMA_FLAG); - (+) void DMA_ClearFlag(DMA_Stream_TypeDef* DMAy_Streamx, uint32_t DMA_FLAG); - - *** Interrupt Mode *** - ====================== - [..] - Each DMA Stream can be managed through 4 Interrupts: - - *** Interrupt Source *** - ======================== - [..] - (#) DMA_IT_FEIFx : specifies the interrupt source for the FIFO Mode Transfer Error event. - (#) DMA_IT_DMEIFx : specifies the interrupt source for the Direct Mode Transfer Error event. - (#) DMA_IT_TEIFx : specifies the interrupt source for the Transfer Error event. - (#) DMA_IT_HTIFx : specifies the interrupt source for the Half-Transfer Complete event. - (#) DMA_IT_TCIFx : specifies the interrupt source for the a Transfer Complete event. - [..] - In this Mode it is advised to use the following functions: - (+) void DMA_ITConfig(DMA_Stream_TypeDef* DMAy_Streamx, uint32_t DMA_IT, FunctionalState NewState); - (+) ITStatus DMA_GetITStatus(DMA_Stream_TypeDef* DMAy_Streamx, uint32_t DMA_IT); - (+) void DMA_ClearITPendingBit(DMA_Stream_TypeDef* DMAy_Streamx, uint32_t DMA_IT); - -@endverbatim - * @{ - */ - -/** - * @brief Returns the status of EN bit for the specified DMAy Streamx. - * @param DMAy_Streamx: where y can be 1 or 2 to select the DMA and x can be 0 - * to 7 to select the DMA Stream. - * - * @note After configuring the DMA Stream (DMA_Init() function) and enabling - * the stream, it is recommended to check (or wait until) the DMA Stream - * is effectively enabled. A Stream may remain disabled if a configuration - * parameter is wrong. - * After disabling a DMA Stream, it is also recommended to check (or wait - * until) the DMA Stream is effectively disabled. If a Stream is disabled - * while a data transfer is ongoing, the current data will be transferred - * and the Stream will be effectively disabled only after the transfer - * of this single data is finished. - * - * @retval Current state of the DMAy Streamx (ENABLE or DISABLE). - */ -FunctionalState DMA_GetCmdStatus(DMA_Stream_TypeDef* DMAy_Streamx) -{ - FunctionalState state = DISABLE; - - /* Check the parameters */ - assert_param(IS_DMA_ALL_PERIPH(DMAy_Streamx)); - - if ((DMAy_Streamx->CR & (uint32_t)DMA_SxCR_EN) != 0) - { - /* The selected DMAy Streamx EN bit is set (DMA is still transferring) */ - state = ENABLE; - } - else - { - /* The selected DMAy Streamx EN bit is cleared (DMA is disabled and - all transfers are complete) */ - state = DISABLE; - } - return state; -} - -/** - * @brief Returns the current DMAy Streamx FIFO filled level. - * @param DMAy_Streamx: where y can be 1 or 2 to select the DMA and x can be 0 - * to 7 to select the DMA Stream. - * @retval The FIFO filling state. - * - DMA_FIFOStatus_Less1QuarterFull: when FIFO is less than 1 quarter-full - * and not empty. - * - DMA_FIFOStatus_1QuarterFull: if more than 1 quarter-full. - * - DMA_FIFOStatus_HalfFull: if more than 1 half-full. - * - DMA_FIFOStatus_3QuartersFull: if more than 3 quarters-full. - * - DMA_FIFOStatus_Empty: when FIFO is empty - * - DMA_FIFOStatus_Full: when FIFO is full - */ -uint32_t DMA_GetFIFOStatus(DMA_Stream_TypeDef* DMAy_Streamx) -{ - uint32_t tmpreg = 0; - - /* Check the parameters */ - assert_param(IS_DMA_ALL_PERIPH(DMAy_Streamx)); - - /* Get the FIFO level bits */ - tmpreg = (uint32_t)((DMAy_Streamx->FCR & DMA_SxFCR_FS)); - - return tmpreg; -} - -/** - * @brief Checks whether the specified DMAy Streamx flag is set or not. - * @param DMAy_Streamx: where y can be 1 or 2 to select the DMA and x can be 0 - * to 7 to select the DMA Stream. - * @param DMA_FLAG: specifies the flag to check. - * This parameter can be one of the following values: - * @arg DMA_FLAG_TCIFx: Streamx transfer complete flag - * @arg DMA_FLAG_HTIFx: Streamx half transfer complete flag - * @arg DMA_FLAG_TEIFx: Streamx transfer error flag - * @arg DMA_FLAG_DMEIFx: Streamx direct mode error flag - * @arg DMA_FLAG_FEIFx: Streamx FIFO error flag - * Where x can be 0 to 7 to select the DMA Stream. - * @retval The new state of DMA_FLAG (SET or RESET). - */ -FlagStatus DMA_GetFlagStatus(DMA_Stream_TypeDef* DMAy_Streamx, uint32_t DMA_FLAG) -{ - FlagStatus bitstatus = RESET; - DMA_TypeDef* DMAy; - uint32_t tmpreg = 0; - - /* Check the parameters */ - assert_param(IS_DMA_ALL_PERIPH(DMAy_Streamx)); - assert_param(IS_DMA_GET_FLAG(DMA_FLAG)); - - /* Determine the DMA to which belongs the stream */ - if (DMAy_Streamx < DMA2_Stream0) - { - /* DMAy_Streamx belongs to DMA1 */ - DMAy = DMA1; - } - else - { - /* DMAy_Streamx belongs to DMA2 */ - DMAy = DMA2; - } - - /* Check if the flag is in HISR or LISR */ - if ((DMA_FLAG & HIGH_ISR_MASK) != (uint32_t)RESET) - { - /* Get DMAy HISR register value */ - tmpreg = DMAy->HISR; - } - else - { - /* Get DMAy LISR register value */ - tmpreg = DMAy->LISR; - } - - /* Mask the reserved bits */ - tmpreg &= (uint32_t)RESERVED_MASK; - - /* Check the status of the specified DMA flag */ - if ((tmpreg & DMA_FLAG) != (uint32_t)RESET) - { - /* DMA_FLAG is set */ - bitstatus = SET; - } - else - { - /* DMA_FLAG is reset */ - bitstatus = RESET; - } - - /* Return the DMA_FLAG status */ - return bitstatus; -} - -/** - * @brief Clears the DMAy Streamx's pending flags. - * @param DMAy_Streamx: where y can be 1 or 2 to select the DMA and x can be 0 - * to 7 to select the DMA Stream. - * @param DMA_FLAG: specifies the flag to clear. - * This parameter can be any combination of the following values: - * @arg DMA_FLAG_TCIFx: Streamx transfer complete flag - * @arg DMA_FLAG_HTIFx: Streamx half transfer complete flag - * @arg DMA_FLAG_TEIFx: Streamx transfer error flag - * @arg DMA_FLAG_DMEIFx: Streamx direct mode error flag - * @arg DMA_FLAG_FEIFx: Streamx FIFO error flag - * Where x can be 0 to 7 to select the DMA Stream. - * @retval None - */ -void DMA_ClearFlag(DMA_Stream_TypeDef* DMAy_Streamx, uint32_t DMA_FLAG) -{ - DMA_TypeDef* DMAy; - - /* Check the parameters */ - assert_param(IS_DMA_ALL_PERIPH(DMAy_Streamx)); - assert_param(IS_DMA_CLEAR_FLAG(DMA_FLAG)); - - /* Determine the DMA to which belongs the stream */ - if (DMAy_Streamx < DMA2_Stream0) - { - /* DMAy_Streamx belongs to DMA1 */ - DMAy = DMA1; - } - else - { - /* DMAy_Streamx belongs to DMA2 */ - DMAy = DMA2; - } - - /* Check if LIFCR or HIFCR register is targeted */ - if ((DMA_FLAG & HIGH_ISR_MASK) != (uint32_t)RESET) - { - /* Set DMAy HIFCR register clear flag bits */ - DMAy->HIFCR = (uint32_t)(DMA_FLAG & RESERVED_MASK); - } - else - { - /* Set DMAy LIFCR register clear flag bits */ - DMAy->LIFCR = (uint32_t)(DMA_FLAG & RESERVED_MASK); - } -} - -/** - * @brief Enables or disables the specified DMAy Streamx interrupts. - * @param DMAy_Streamx: where y can be 1 or 2 to select the DMA and x can be 0 - * to 7 to select the DMA Stream. - * @param DMA_IT: specifies the DMA interrupt sources to be enabled or disabled. - * This parameter can be any combination of the following values: - * @arg DMA_IT_TC: Transfer complete interrupt mask - * @arg DMA_IT_HT: Half transfer complete interrupt mask - * @arg DMA_IT_TE: Transfer error interrupt mask - * @arg DMA_IT_FE: FIFO error interrupt mask - * @param NewState: new state of the specified DMA interrupts. - * This parameter can be: ENABLE or DISABLE. - * @retval None - */ -void DMA_ITConfig(DMA_Stream_TypeDef* DMAy_Streamx, uint32_t DMA_IT, FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_DMA_ALL_PERIPH(DMAy_Streamx)); - assert_param(IS_DMA_CONFIG_IT(DMA_IT)); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - - /* Check if the DMA_IT parameter contains a FIFO interrupt */ - if ((DMA_IT & DMA_IT_FE) != 0) - { - if (NewState != DISABLE) - { - /* Enable the selected DMA FIFO interrupts */ - DMAy_Streamx->FCR |= (uint32_t)DMA_IT_FE; - } - else - { - /* Disable the selected DMA FIFO interrupts */ - DMAy_Streamx->FCR &= ~(uint32_t)DMA_IT_FE; - } - } - - /* Check if the DMA_IT parameter contains a Transfer interrupt */ - if (DMA_IT != DMA_IT_FE) - { - if (NewState != DISABLE) - { - /* Enable the selected DMA transfer interrupts */ - DMAy_Streamx->CR |= (uint32_t)(DMA_IT & TRANSFER_IT_ENABLE_MASK); - } - else - { - /* Disable the selected DMA transfer interrupts */ - DMAy_Streamx->CR &= ~(uint32_t)(DMA_IT & TRANSFER_IT_ENABLE_MASK); - } - } -} - -/** - * @brief Checks whether the specified DMAy Streamx interrupt has occurred or not. - * @param DMAy_Streamx: where y can be 1 or 2 to select the DMA and x can be 0 - * to 7 to select the DMA Stream. - * @param DMA_IT: specifies the DMA interrupt source to check. - * This parameter can be one of the following values: - * @arg DMA_IT_TCIFx: Streamx transfer complete interrupt - * @arg DMA_IT_HTIFx: Streamx half transfer complete interrupt - * @arg DMA_IT_TEIFx: Streamx transfer error interrupt - * @arg DMA_IT_DMEIFx: Streamx direct mode error interrupt - * @arg DMA_IT_FEIFx: Streamx FIFO error interrupt - * Where x can be 0 to 7 to select the DMA Stream. - * @retval The new state of DMA_IT (SET or RESET). - */ -ITStatus DMA_GetITStatus(DMA_Stream_TypeDef* DMAy_Streamx, uint32_t DMA_IT) -{ - ITStatus bitstatus = RESET; - DMA_TypeDef* DMAy; - uint32_t tmpreg = 0, enablestatus = 0; - - /* Check the parameters */ - assert_param(IS_DMA_ALL_PERIPH(DMAy_Streamx)); - assert_param(IS_DMA_GET_IT(DMA_IT)); - - /* Determine the DMA to which belongs the stream */ - if (DMAy_Streamx < DMA2_Stream0) - { - /* DMAy_Streamx belongs to DMA1 */ - DMAy = DMA1; - } - else - { - /* DMAy_Streamx belongs to DMA2 */ - DMAy = DMA2; - } - - /* Check if the interrupt enable bit is in the CR or FCR register */ - if ((DMA_IT & TRANSFER_IT_MASK) != (uint32_t)RESET) - { - /* Get the interrupt enable position mask in CR register */ - tmpreg = (uint32_t)((DMA_IT >> 11) & TRANSFER_IT_ENABLE_MASK); - - /* Check the enable bit in CR register */ - enablestatus = (uint32_t)(DMAy_Streamx->CR & tmpreg); - } - else - { - /* Check the enable bit in FCR register */ - enablestatus = (uint32_t)(DMAy_Streamx->FCR & DMA_IT_FE); - } - - /* Check if the interrupt pending flag is in LISR or HISR */ - if ((DMA_IT & HIGH_ISR_MASK) != (uint32_t)RESET) - { - /* Get DMAy HISR register value */ - tmpreg = DMAy->HISR ; - } - else - { - /* Get DMAy LISR register value */ - tmpreg = DMAy->LISR ; - } - - /* mask all reserved bits */ - tmpreg &= (uint32_t)RESERVED_MASK; - - /* Check the status of the specified DMA interrupt */ - if (((tmpreg & DMA_IT) != (uint32_t)RESET) && (enablestatus != (uint32_t)RESET)) - { - /* DMA_IT is set */ - bitstatus = SET; - } - else - { - /* DMA_IT is reset */ - bitstatus = RESET; - } - - /* Return the DMA_IT status */ - return bitstatus; -} - -/** - * @brief Clears the DMAy Streamx's interrupt pending bits. - * @param DMAy_Streamx: where y can be 1 or 2 to select the DMA and x can be 0 - * to 7 to select the DMA Stream. - * @param DMA_IT: specifies the DMA interrupt pending bit to clear. - * This parameter can be any combination of the following values: - * @arg DMA_IT_TCIFx: Streamx transfer complete interrupt - * @arg DMA_IT_HTIFx: Streamx half transfer complete interrupt - * @arg DMA_IT_TEIFx: Streamx transfer error interrupt - * @arg DMA_IT_DMEIFx: Streamx direct mode error interrupt - * @arg DMA_IT_FEIFx: Streamx FIFO error interrupt - * Where x can be 0 to 7 to select the DMA Stream. - * @retval None - */ -void DMA_ClearITPendingBit(DMA_Stream_TypeDef* DMAy_Streamx, uint32_t DMA_IT) -{ - DMA_TypeDef* DMAy; - - /* Check the parameters */ - assert_param(IS_DMA_ALL_PERIPH(DMAy_Streamx)); - assert_param(IS_DMA_CLEAR_IT(DMA_IT)); - - /* Determine the DMA to which belongs the stream */ - if (DMAy_Streamx < DMA2_Stream0) - { - /* DMAy_Streamx belongs to DMA1 */ - DMAy = DMA1; - } - else - { - /* DMAy_Streamx belongs to DMA2 */ - DMAy = DMA2; - } - - /* Check if LIFCR or HIFCR register is targeted */ - if ((DMA_IT & HIGH_ISR_MASK) != (uint32_t)RESET) - { - /* Set DMAy HIFCR register clear interrupt bits */ - DMAy->HIFCR = (uint32_t)(DMA_IT & RESERVED_MASK); - } - else - { - /* Set DMAy LIFCR register clear interrupt bits */ - DMAy->LIFCR = (uint32_t)(DMA_IT & RESERVED_MASK); - } -} - -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/stm/lib/stm32f4xx_dma.h b/stm/lib/stm32f4xx_dma.h deleted file mode 100644 index 3a105d1b4..000000000 --- a/stm/lib/stm32f4xx_dma.h +++ /dev/null @@ -1,609 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f4xx_dma.h - * @author MCD Application Team - * @version V1.3.0 - * @date 08-November-2013 - * @brief This file contains all the functions prototypes for the DMA firmware - * library. - ****************************************************************************** - * @attention - * - *

© COPYRIGHT 2013 STMicroelectronics

- * - * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License"); - * You may not use this file except in compliance with the License. - * You may obtain a copy of the License at: - * - * http://www.st.com/software_license_agreement_liberty_v2 - * - * Unless required by applicable law or agreed to in writing, software - * distributed under the License is distributed on an "AS IS" BASIS, - * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - * See the License for the specific language governing permissions and - * limitations under the License. - * - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F4xx_DMA_H -#define __STM32F4xx_DMA_H - -#ifdef __cplusplus - extern "C" { -#endif - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx.h" - -/** @addtogroup STM32F4xx_StdPeriph_Driver - * @{ - */ - -/** @addtogroup DMA - * @{ - */ - -/* Exported types ------------------------------------------------------------*/ - -/** - * @brief DMA Init structure definition - */ - -typedef struct -{ - uint32_t DMA_Channel; /*!< Specifies the channel used for the specified stream. - This parameter can be a value of @ref DMA_channel */ - - uint32_t DMA_PeripheralBaseAddr; /*!< Specifies the peripheral base address for DMAy Streamx. */ - - uint32_t DMA_Memory0BaseAddr; /*!< Specifies the memory 0 base address for DMAy Streamx. - This memory is the default memory used when double buffer mode is - not enabled. */ - - uint32_t DMA_DIR; /*!< Specifies if the data will be transferred from memory to peripheral, - from memory to memory or from peripheral to memory. - This parameter can be a value of @ref DMA_data_transfer_direction */ - - uint32_t DMA_BufferSize; /*!< Specifies the buffer size, in data unit, of the specified Stream. - The data unit is equal to the configuration set in DMA_PeripheralDataSize - or DMA_MemoryDataSize members depending in the transfer direction. */ - - uint32_t DMA_PeripheralInc; /*!< Specifies whether the Peripheral address register should be incremented or not. - This parameter can be a value of @ref DMA_peripheral_incremented_mode */ - - uint32_t DMA_MemoryInc; /*!< Specifies whether the memory address register should be incremented or not. - This parameter can be a value of @ref DMA_memory_incremented_mode */ - - uint32_t DMA_PeripheralDataSize; /*!< Specifies the Peripheral data width. - This parameter can be a value of @ref DMA_peripheral_data_size */ - - uint32_t DMA_MemoryDataSize; /*!< Specifies the Memory data width. - This parameter can be a value of @ref DMA_memory_data_size */ - - uint32_t DMA_Mode; /*!< Specifies the operation mode of the DMAy Streamx. - This parameter can be a value of @ref DMA_circular_normal_mode - @note The circular buffer mode cannot be used if the memory-to-memory - data transfer is configured on the selected Stream */ - - uint32_t DMA_Priority; /*!< Specifies the software priority for the DMAy Streamx. - This parameter can be a value of @ref DMA_priority_level */ - - uint32_t DMA_FIFOMode; /*!< Specifies if the FIFO mode or Direct mode will be used for the specified Stream. - This parameter can be a value of @ref DMA_fifo_direct_mode - @note The Direct mode (FIFO mode disabled) cannot be used if the - memory-to-memory data transfer is configured on the selected Stream */ - - uint32_t DMA_FIFOThreshold; /*!< Specifies the FIFO threshold level. - This parameter can be a value of @ref DMA_fifo_threshold_level */ - - uint32_t DMA_MemoryBurst; /*!< Specifies the Burst transfer configuration for the memory transfers. - It specifies the amount of data to be transferred in a single non interruptable - transaction. This parameter can be a value of @ref DMA_memory_burst - @note The burst mode is possible only if the address Increment mode is enabled. */ - - uint32_t DMA_PeripheralBurst; /*!< Specifies the Burst transfer configuration for the peripheral transfers. - It specifies the amount of data to be transferred in a single non interruptable - transaction. This parameter can be a value of @ref DMA_peripheral_burst - @note The burst mode is possible only if the address Increment mode is enabled. */ -}DMA_InitTypeDef; - -/* Exported constants --------------------------------------------------------*/ - -/** @defgroup DMA_Exported_Constants - * @{ - */ - -#define IS_DMA_ALL_PERIPH(PERIPH) (((PERIPH) == DMA1_Stream0) || \ - ((PERIPH) == DMA1_Stream1) || \ - ((PERIPH) == DMA1_Stream2) || \ - ((PERIPH) == DMA1_Stream3) || \ - ((PERIPH) == DMA1_Stream4) || \ - ((PERIPH) == DMA1_Stream5) || \ - ((PERIPH) == DMA1_Stream6) || \ - ((PERIPH) == DMA1_Stream7) || \ - ((PERIPH) == DMA2_Stream0) || \ - ((PERIPH) == DMA2_Stream1) || \ - ((PERIPH) == DMA2_Stream2) || \ - ((PERIPH) == DMA2_Stream3) || \ - ((PERIPH) == DMA2_Stream4) || \ - ((PERIPH) == DMA2_Stream5) || \ - ((PERIPH) == DMA2_Stream6) || \ - ((PERIPH) == DMA2_Stream7)) - -#define IS_DMA_ALL_CONTROLLER(CONTROLLER) (((CONTROLLER) == DMA1) || \ - ((CONTROLLER) == DMA2)) - -/** @defgroup DMA_channel - * @{ - */ -#define DMA_Channel_0 ((uint32_t)0x00000000) -#define DMA_Channel_1 ((uint32_t)0x02000000) -#define DMA_Channel_2 ((uint32_t)0x04000000) -#define DMA_Channel_3 ((uint32_t)0x06000000) -#define DMA_Channel_4 ((uint32_t)0x08000000) -#define DMA_Channel_5 ((uint32_t)0x0A000000) -#define DMA_Channel_6 ((uint32_t)0x0C000000) -#define DMA_Channel_7 ((uint32_t)0x0E000000) - -#define IS_DMA_CHANNEL(CHANNEL) (((CHANNEL) == DMA_Channel_0) || \ - ((CHANNEL) == DMA_Channel_1) || \ - ((CHANNEL) == DMA_Channel_2) || \ - ((CHANNEL) == DMA_Channel_3) || \ - ((CHANNEL) == DMA_Channel_4) || \ - ((CHANNEL) == DMA_Channel_5) || \ - ((CHANNEL) == DMA_Channel_6) || \ - ((CHANNEL) == DMA_Channel_7)) -/** - * @} - */ - - -/** @defgroup DMA_data_transfer_direction - * @{ - */ -#define DMA_DIR_PeripheralToMemory ((uint32_t)0x00000000) -#define DMA_DIR_MemoryToPeripheral ((uint32_t)0x00000040) -#define DMA_DIR_MemoryToMemory ((uint32_t)0x00000080) - -#define IS_DMA_DIRECTION(DIRECTION) (((DIRECTION) == DMA_DIR_PeripheralToMemory ) || \ - ((DIRECTION) == DMA_DIR_MemoryToPeripheral) || \ - ((DIRECTION) == DMA_DIR_MemoryToMemory)) -/** - * @} - */ - - -/** @defgroup DMA_data_buffer_size - * @{ - */ -#define IS_DMA_BUFFER_SIZE(SIZE) (((SIZE) >= 0x1) && ((SIZE) < 0x10000)) -/** - * @} - */ - - -/** @defgroup DMA_peripheral_incremented_mode - * @{ - */ -#define DMA_PeripheralInc_Enable ((uint32_t)0x00000200) -#define DMA_PeripheralInc_Disable ((uint32_t)0x00000000) - -#define IS_DMA_PERIPHERAL_INC_STATE(STATE) (((STATE) == DMA_PeripheralInc_Enable) || \ - ((STATE) == DMA_PeripheralInc_Disable)) -/** - * @} - */ - - -/** @defgroup DMA_memory_incremented_mode - * @{ - */ -#define DMA_MemoryInc_Enable ((uint32_t)0x00000400) -#define DMA_MemoryInc_Disable ((uint32_t)0x00000000) - -#define IS_DMA_MEMORY_INC_STATE(STATE) (((STATE) == DMA_MemoryInc_Enable) || \ - ((STATE) == DMA_MemoryInc_Disable)) -/** - * @} - */ - - -/** @defgroup DMA_peripheral_data_size - * @{ - */ -#define DMA_PeripheralDataSize_Byte ((uint32_t)0x00000000) -#define DMA_PeripheralDataSize_HalfWord ((uint32_t)0x00000800) -#define DMA_PeripheralDataSize_Word ((uint32_t)0x00001000) - -#define IS_DMA_PERIPHERAL_DATA_SIZE(SIZE) (((SIZE) == DMA_PeripheralDataSize_Byte) || \ - ((SIZE) == DMA_PeripheralDataSize_HalfWord) || \ - ((SIZE) == DMA_PeripheralDataSize_Word)) -/** - * @} - */ - - -/** @defgroup DMA_memory_data_size - * @{ - */ -#define DMA_MemoryDataSize_Byte ((uint32_t)0x00000000) -#define DMA_MemoryDataSize_HalfWord ((uint32_t)0x00002000) -#define DMA_MemoryDataSize_Word ((uint32_t)0x00004000) - -#define IS_DMA_MEMORY_DATA_SIZE(SIZE) (((SIZE) == DMA_MemoryDataSize_Byte) || \ - ((SIZE) == DMA_MemoryDataSize_HalfWord) || \ - ((SIZE) == DMA_MemoryDataSize_Word )) -/** - * @} - */ - - -/** @defgroup DMA_circular_normal_mode - * @{ - */ -#define DMA_Mode_Normal ((uint32_t)0x00000000) -#define DMA_Mode_Circular ((uint32_t)0x00000100) - -#define IS_DMA_MODE(MODE) (((MODE) == DMA_Mode_Normal ) || \ - ((MODE) == DMA_Mode_Circular)) -/** - * @} - */ - - -/** @defgroup DMA_priority_level - * @{ - */ -#define DMA_Priority_Low ((uint32_t)0x00000000) -#define DMA_Priority_Medium ((uint32_t)0x00010000) -#define DMA_Priority_High ((uint32_t)0x00020000) -#define DMA_Priority_VeryHigh ((uint32_t)0x00030000) - -#define IS_DMA_PRIORITY(PRIORITY) (((PRIORITY) == DMA_Priority_Low ) || \ - ((PRIORITY) == DMA_Priority_Medium) || \ - ((PRIORITY) == DMA_Priority_High) || \ - ((PRIORITY) == DMA_Priority_VeryHigh)) -/** - * @} - */ - - -/** @defgroup DMA_fifo_direct_mode - * @{ - */ -#define DMA_FIFOMode_Disable ((uint32_t)0x00000000) -#define DMA_FIFOMode_Enable ((uint32_t)0x00000004) - -#define IS_DMA_FIFO_MODE_STATE(STATE) (((STATE) == DMA_FIFOMode_Disable ) || \ - ((STATE) == DMA_FIFOMode_Enable)) -/** - * @} - */ - - -/** @defgroup DMA_fifo_threshold_level - * @{ - */ -#define DMA_FIFOThreshold_1QuarterFull ((uint32_t)0x00000000) -#define DMA_FIFOThreshold_HalfFull ((uint32_t)0x00000001) -#define DMA_FIFOThreshold_3QuartersFull ((uint32_t)0x00000002) -#define DMA_FIFOThreshold_Full ((uint32_t)0x00000003) - -#define IS_DMA_FIFO_THRESHOLD(THRESHOLD) (((THRESHOLD) == DMA_FIFOThreshold_1QuarterFull ) || \ - ((THRESHOLD) == DMA_FIFOThreshold_HalfFull) || \ - ((THRESHOLD) == DMA_FIFOThreshold_3QuartersFull) || \ - ((THRESHOLD) == DMA_FIFOThreshold_Full)) -/** - * @} - */ - - -/** @defgroup DMA_memory_burst - * @{ - */ -#define DMA_MemoryBurst_Single ((uint32_t)0x00000000) -#define DMA_MemoryBurst_INC4 ((uint32_t)0x00800000) -#define DMA_MemoryBurst_INC8 ((uint32_t)0x01000000) -#define DMA_MemoryBurst_INC16 ((uint32_t)0x01800000) - -#define IS_DMA_MEMORY_BURST(BURST) (((BURST) == DMA_MemoryBurst_Single) || \ - ((BURST) == DMA_MemoryBurst_INC4) || \ - ((BURST) == DMA_MemoryBurst_INC8) || \ - ((BURST) == DMA_MemoryBurst_INC16)) -/** - * @} - */ - - -/** @defgroup DMA_peripheral_burst - * @{ - */ -#define DMA_PeripheralBurst_Single ((uint32_t)0x00000000) -#define DMA_PeripheralBurst_INC4 ((uint32_t)0x00200000) -#define DMA_PeripheralBurst_INC8 ((uint32_t)0x00400000) -#define DMA_PeripheralBurst_INC16 ((uint32_t)0x00600000) - -#define IS_DMA_PERIPHERAL_BURST(BURST) (((BURST) == DMA_PeripheralBurst_Single) || \ - ((BURST) == DMA_PeripheralBurst_INC4) || \ - ((BURST) == DMA_PeripheralBurst_INC8) || \ - ((BURST) == DMA_PeripheralBurst_INC16)) -/** - * @} - */ - - -/** @defgroup DMA_fifo_status_level - * @{ - */ -#define DMA_FIFOStatus_Less1QuarterFull ((uint32_t)0x00000000 << 3) -#define DMA_FIFOStatus_1QuarterFull ((uint32_t)0x00000001 << 3) -#define DMA_FIFOStatus_HalfFull ((uint32_t)0x00000002 << 3) -#define DMA_FIFOStatus_3QuartersFull ((uint32_t)0x00000003 << 3) -#define DMA_FIFOStatus_Empty ((uint32_t)0x00000004 << 3) -#define DMA_FIFOStatus_Full ((uint32_t)0x00000005 << 3) - -#define IS_DMA_FIFO_STATUS(STATUS) (((STATUS) == DMA_FIFOStatus_Less1QuarterFull ) || \ - ((STATUS) == DMA_FIFOStatus_HalfFull) || \ - ((STATUS) == DMA_FIFOStatus_1QuarterFull) || \ - ((STATUS) == DMA_FIFOStatus_3QuartersFull) || \ - ((STATUS) == DMA_FIFOStatus_Full) || \ - ((STATUS) == DMA_FIFOStatus_Empty)) -/** - * @} - */ - -/** @defgroup DMA_flags_definition - * @{ - */ -#define DMA_FLAG_FEIF0 ((uint32_t)0x10800001) -#define DMA_FLAG_DMEIF0 ((uint32_t)0x10800004) -#define DMA_FLAG_TEIF0 ((uint32_t)0x10000008) -#define DMA_FLAG_HTIF0 ((uint32_t)0x10000010) -#define DMA_FLAG_TCIF0 ((uint32_t)0x10000020) -#define DMA_FLAG_FEIF1 ((uint32_t)0x10000040) -#define DMA_FLAG_DMEIF1 ((uint32_t)0x10000100) -#define DMA_FLAG_TEIF1 ((uint32_t)0x10000200) -#define DMA_FLAG_HTIF1 ((uint32_t)0x10000400) -#define DMA_FLAG_TCIF1 ((uint32_t)0x10000800) -#define DMA_FLAG_FEIF2 ((uint32_t)0x10010000) -#define DMA_FLAG_DMEIF2 ((uint32_t)0x10040000) -#define DMA_FLAG_TEIF2 ((uint32_t)0x10080000) -#define DMA_FLAG_HTIF2 ((uint32_t)0x10100000) -#define DMA_FLAG_TCIF2 ((uint32_t)0x10200000) -#define DMA_FLAG_FEIF3 ((uint32_t)0x10400000) -#define DMA_FLAG_DMEIF3 ((uint32_t)0x11000000) -#define DMA_FLAG_TEIF3 ((uint32_t)0x12000000) -#define DMA_FLAG_HTIF3 ((uint32_t)0x14000000) -#define DMA_FLAG_TCIF3 ((uint32_t)0x18000000) -#define DMA_FLAG_FEIF4 ((uint32_t)0x20000001) -#define DMA_FLAG_DMEIF4 ((uint32_t)0x20000004) -#define DMA_FLAG_TEIF4 ((uint32_t)0x20000008) -#define DMA_FLAG_HTIF4 ((uint32_t)0x20000010) -#define DMA_FLAG_TCIF4 ((uint32_t)0x20000020) -#define DMA_FLAG_FEIF5 ((uint32_t)0x20000040) -#define DMA_FLAG_DMEIF5 ((uint32_t)0x20000100) -#define DMA_FLAG_TEIF5 ((uint32_t)0x20000200) -#define DMA_FLAG_HTIF5 ((uint32_t)0x20000400) -#define DMA_FLAG_TCIF5 ((uint32_t)0x20000800) -#define DMA_FLAG_FEIF6 ((uint32_t)0x20010000) -#define DMA_FLAG_DMEIF6 ((uint32_t)0x20040000) -#define DMA_FLAG_TEIF6 ((uint32_t)0x20080000) -#define DMA_FLAG_HTIF6 ((uint32_t)0x20100000) -#define DMA_FLAG_TCIF6 ((uint32_t)0x20200000) -#define DMA_FLAG_FEIF7 ((uint32_t)0x20400000) -#define DMA_FLAG_DMEIF7 ((uint32_t)0x21000000) -#define DMA_FLAG_TEIF7 ((uint32_t)0x22000000) -#define DMA_FLAG_HTIF7 ((uint32_t)0x24000000) -#define DMA_FLAG_TCIF7 ((uint32_t)0x28000000) - -#define IS_DMA_CLEAR_FLAG(FLAG) ((((FLAG) & 0x30000000) != 0x30000000) && (((FLAG) & 0x30000000) != 0) && \ - (((FLAG) & 0xC002F082) == 0x00) && ((FLAG) != 0x00)) - -#define IS_DMA_GET_FLAG(FLAG) (((FLAG) == DMA_FLAG_TCIF0) || ((FLAG) == DMA_FLAG_HTIF0) || \ - ((FLAG) == DMA_FLAG_TEIF0) || ((FLAG) == DMA_FLAG_DMEIF0) || \ - ((FLAG) == DMA_FLAG_FEIF0) || ((FLAG) == DMA_FLAG_TCIF1) || \ - ((FLAG) == DMA_FLAG_HTIF1) || ((FLAG) == DMA_FLAG_TEIF1) || \ - ((FLAG) == DMA_FLAG_DMEIF1) || ((FLAG) == DMA_FLAG_FEIF1) || \ - ((FLAG) == DMA_FLAG_TCIF2) || ((FLAG) == DMA_FLAG_HTIF2) || \ - ((FLAG) == DMA_FLAG_TEIF2) || ((FLAG) == DMA_FLAG_DMEIF2) || \ - ((FLAG) == DMA_FLAG_FEIF2) || ((FLAG) == DMA_FLAG_TCIF3) || \ - ((FLAG) == DMA_FLAG_HTIF3) || ((FLAG) == DMA_FLAG_TEIF3) || \ - ((FLAG) == DMA_FLAG_DMEIF3) || ((FLAG) == DMA_FLAG_FEIF3) || \ - ((FLAG) == DMA_FLAG_TCIF4) || ((FLAG) == DMA_FLAG_HTIF4) || \ - ((FLAG) == DMA_FLAG_TEIF4) || ((FLAG) == DMA_FLAG_DMEIF4) || \ - ((FLAG) == DMA_FLAG_FEIF4) || ((FLAG) == DMA_FLAG_TCIF5) || \ - ((FLAG) == DMA_FLAG_HTIF5) || ((FLAG) == DMA_FLAG_TEIF5) || \ - ((FLAG) == DMA_FLAG_DMEIF5) || ((FLAG) == DMA_FLAG_FEIF5) || \ - ((FLAG) == DMA_FLAG_TCIF6) || ((FLAG) == DMA_FLAG_HTIF6) || \ - ((FLAG) == DMA_FLAG_TEIF6) || ((FLAG) == DMA_FLAG_DMEIF6) || \ - ((FLAG) == DMA_FLAG_FEIF6) || ((FLAG) == DMA_FLAG_TCIF7) || \ - ((FLAG) == DMA_FLAG_HTIF7) || ((FLAG) == DMA_FLAG_TEIF7) || \ - ((FLAG) == DMA_FLAG_DMEIF7) || ((FLAG) == DMA_FLAG_FEIF7)) -/** - * @} - */ - - -/** @defgroup DMA_interrupt_enable_definitions - * @{ - */ -#define DMA_IT_TC ((uint32_t)0x00000010) -#define DMA_IT_HT ((uint32_t)0x00000008) -#define DMA_IT_TE ((uint32_t)0x00000004) -#define DMA_IT_DME ((uint32_t)0x00000002) -#define DMA_IT_FE ((uint32_t)0x00000080) - -#define IS_DMA_CONFIG_IT(IT) ((((IT) & 0xFFFFFF61) == 0x00) && ((IT) != 0x00)) -/** - * @} - */ - - -/** @defgroup DMA_interrupts_definitions - * @{ - */ -#define DMA_IT_FEIF0 ((uint32_t)0x90000001) -#define DMA_IT_DMEIF0 ((uint32_t)0x10001004) -#define DMA_IT_TEIF0 ((uint32_t)0x10002008) -#define DMA_IT_HTIF0 ((uint32_t)0x10004010) -#define DMA_IT_TCIF0 ((uint32_t)0x10008020) -#define DMA_IT_FEIF1 ((uint32_t)0x90000040) -#define DMA_IT_DMEIF1 ((uint32_t)0x10001100) -#define DMA_IT_TEIF1 ((uint32_t)0x10002200) -#define DMA_IT_HTIF1 ((uint32_t)0x10004400) -#define DMA_IT_TCIF1 ((uint32_t)0x10008800) -#define DMA_IT_FEIF2 ((uint32_t)0x90010000) -#define DMA_IT_DMEIF2 ((uint32_t)0x10041000) -#define DMA_IT_TEIF2 ((uint32_t)0x10082000) -#define DMA_IT_HTIF2 ((uint32_t)0x10104000) -#define DMA_IT_TCIF2 ((uint32_t)0x10208000) -#define DMA_IT_FEIF3 ((uint32_t)0x90400000) -#define DMA_IT_DMEIF3 ((uint32_t)0x11001000) -#define DMA_IT_TEIF3 ((uint32_t)0x12002000) -#define DMA_IT_HTIF3 ((uint32_t)0x14004000) -#define DMA_IT_TCIF3 ((uint32_t)0x18008000) -#define DMA_IT_FEIF4 ((uint32_t)0xA0000001) -#define DMA_IT_DMEIF4 ((uint32_t)0x20001004) -#define DMA_IT_TEIF4 ((uint32_t)0x20002008) -#define DMA_IT_HTIF4 ((uint32_t)0x20004010) -#define DMA_IT_TCIF4 ((uint32_t)0x20008020) -#define DMA_IT_FEIF5 ((uint32_t)0xA0000040) -#define DMA_IT_DMEIF5 ((uint32_t)0x20001100) -#define DMA_IT_TEIF5 ((uint32_t)0x20002200) -#define DMA_IT_HTIF5 ((uint32_t)0x20004400) -#define DMA_IT_TCIF5 ((uint32_t)0x20008800) -#define DMA_IT_FEIF6 ((uint32_t)0xA0010000) -#define DMA_IT_DMEIF6 ((uint32_t)0x20041000) -#define DMA_IT_TEIF6 ((uint32_t)0x20082000) -#define DMA_IT_HTIF6 ((uint32_t)0x20104000) -#define DMA_IT_TCIF6 ((uint32_t)0x20208000) -#define DMA_IT_FEIF7 ((uint32_t)0xA0400000) -#define DMA_IT_DMEIF7 ((uint32_t)0x21001000) -#define DMA_IT_TEIF7 ((uint32_t)0x22002000) -#define DMA_IT_HTIF7 ((uint32_t)0x24004000) -#define DMA_IT_TCIF7 ((uint32_t)0x28008000) - -#define IS_DMA_CLEAR_IT(IT) ((((IT) & 0x30000000) != 0x30000000) && \ - (((IT) & 0x30000000) != 0) && ((IT) != 0x00) && \ - (((IT) & 0x40820082) == 0x00)) - -#define IS_DMA_GET_IT(IT) (((IT) == DMA_IT_TCIF0) || ((IT) == DMA_IT_HTIF0) || \ - ((IT) == DMA_IT_TEIF0) || ((IT) == DMA_IT_DMEIF0) || \ - ((IT) == DMA_IT_FEIF0) || ((IT) == DMA_IT_TCIF1) || \ - ((IT) == DMA_IT_HTIF1) || ((IT) == DMA_IT_TEIF1) || \ - ((IT) == DMA_IT_DMEIF1)|| ((IT) == DMA_IT_FEIF1) || \ - ((IT) == DMA_IT_TCIF2) || ((IT) == DMA_IT_HTIF2) || \ - ((IT) == DMA_IT_TEIF2) || ((IT) == DMA_IT_DMEIF2) || \ - ((IT) == DMA_IT_FEIF2) || ((IT) == DMA_IT_TCIF3) || \ - ((IT) == DMA_IT_HTIF3) || ((IT) == DMA_IT_TEIF3) || \ - ((IT) == DMA_IT_DMEIF3)|| ((IT) == DMA_IT_FEIF3) || \ - ((IT) == DMA_IT_TCIF4) || ((IT) == DMA_IT_HTIF4) || \ - ((IT) == DMA_IT_TEIF4) || ((IT) == DMA_IT_DMEIF4) || \ - ((IT) == DMA_IT_FEIF4) || ((IT) == DMA_IT_TCIF5) || \ - ((IT) == DMA_IT_HTIF5) || ((IT) == DMA_IT_TEIF5) || \ - ((IT) == DMA_IT_DMEIF5)|| ((IT) == DMA_IT_FEIF5) || \ - ((IT) == DMA_IT_TCIF6) || ((IT) == DMA_IT_HTIF6) || \ - ((IT) == DMA_IT_TEIF6) || ((IT) == DMA_IT_DMEIF6) || \ - ((IT) == DMA_IT_FEIF6) || ((IT) == DMA_IT_TCIF7) || \ - ((IT) == DMA_IT_HTIF7) || ((IT) == DMA_IT_TEIF7) || \ - ((IT) == DMA_IT_DMEIF7)|| ((IT) == DMA_IT_FEIF7)) -/** - * @} - */ - - -/** @defgroup DMA_peripheral_increment_offset - * @{ - */ -#define DMA_PINCOS_Psize ((uint32_t)0x00000000) -#define DMA_PINCOS_WordAligned ((uint32_t)0x00008000) - -#define IS_DMA_PINCOS_SIZE(SIZE) (((SIZE) == DMA_PINCOS_Psize) || \ - ((SIZE) == DMA_PINCOS_WordAligned)) -/** - * @} - */ - - -/** @defgroup DMA_flow_controller_definitions - * @{ - */ -#define DMA_FlowCtrl_Memory ((uint32_t)0x00000000) -#define DMA_FlowCtrl_Peripheral ((uint32_t)0x00000020) - -#define IS_DMA_FLOW_CTRL(CTRL) (((CTRL) == DMA_FlowCtrl_Memory) || \ - ((CTRL) == DMA_FlowCtrl_Peripheral)) -/** - * @} - */ - - -/** @defgroup DMA_memory_targets_definitions - * @{ - */ -#define DMA_Memory_0 ((uint32_t)0x00000000) -#define DMA_Memory_1 ((uint32_t)0x00080000) - -#define IS_DMA_CURRENT_MEM(MEM) (((MEM) == DMA_Memory_0) || ((MEM) == DMA_Memory_1)) -/** - * @} - */ - -/** - * @} - */ - -/* Exported macro ------------------------------------------------------------*/ -/* Exported functions --------------------------------------------------------*/ - -/* Function used to set the DMA configuration to the default reset state *****/ -void DMA_DeInit(DMA_Stream_TypeDef* DMAy_Streamx); - -/* Initialization and Configuration functions *********************************/ -void DMA_Init(DMA_Stream_TypeDef* DMAy_Streamx, DMA_InitTypeDef* DMA_InitStruct); -void DMA_StructInit(DMA_InitTypeDef* DMA_InitStruct); -void DMA_Cmd(DMA_Stream_TypeDef* DMAy_Streamx, FunctionalState NewState); - -/* Optional Configuration functions *******************************************/ -void DMA_PeriphIncOffsetSizeConfig(DMA_Stream_TypeDef* DMAy_Streamx, uint32_t DMA_Pincos); -void DMA_FlowControllerConfig(DMA_Stream_TypeDef* DMAy_Streamx, uint32_t DMA_FlowCtrl); - -/* Data Counter functions *****************************************************/ -void DMA_SetCurrDataCounter(DMA_Stream_TypeDef* DMAy_Streamx, uint16_t Counter); -uint16_t DMA_GetCurrDataCounter(DMA_Stream_TypeDef* DMAy_Streamx); - -/* Double Buffer mode functions ***********************************************/ -void DMA_DoubleBufferModeConfig(DMA_Stream_TypeDef* DMAy_Streamx, uint32_t Memory1BaseAddr, - uint32_t DMA_CurrentMemory); -void DMA_DoubleBufferModeCmd(DMA_Stream_TypeDef* DMAy_Streamx, FunctionalState NewState); -void DMA_MemoryTargetConfig(DMA_Stream_TypeDef* DMAy_Streamx, uint32_t MemoryBaseAddr, - uint32_t DMA_MemoryTarget); -uint32_t DMA_GetCurrentMemoryTarget(DMA_Stream_TypeDef* DMAy_Streamx); - -/* Interrupts and flags management functions **********************************/ -FunctionalState DMA_GetCmdStatus(DMA_Stream_TypeDef* DMAy_Streamx); -uint32_t DMA_GetFIFOStatus(DMA_Stream_TypeDef* DMAy_Streamx); -FlagStatus DMA_GetFlagStatus(DMA_Stream_TypeDef* DMAy_Streamx, uint32_t DMA_FLAG); -void DMA_ClearFlag(DMA_Stream_TypeDef* DMAy_Streamx, uint32_t DMA_FLAG); -void DMA_ITConfig(DMA_Stream_TypeDef* DMAy_Streamx, uint32_t DMA_IT, FunctionalState NewState); -ITStatus DMA_GetITStatus(DMA_Stream_TypeDef* DMAy_Streamx, uint32_t DMA_IT); -void DMA_ClearITPendingBit(DMA_Stream_TypeDef* DMAy_Streamx, uint32_t DMA_IT); - -#ifdef __cplusplus -} -#endif - -#endif /*__STM32F4xx_DMA_H */ - -/** - * @} - */ - -/** - * @} - */ - - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/stm/lib/stm32f4xx_exti.c b/stm/lib/stm32f4xx_exti.c deleted file mode 100644 index 4eb676417..000000000 --- a/stm/lib/stm32f4xx_exti.c +++ /dev/null @@ -1,312 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f4xx_exti.c - * @author MCD Application Team - * @version V1.3.0 - * @date 08-November-2013 - * @brief This file provides firmware functions to manage the following - * functionalities of the EXTI peripheral: - * + Initialization and Configuration - * + Interrupts and flags management - * -@verbatim - - =================================================================== - ##### EXTI features ##### - =================================================================== - - [..] External interrupt/event lines are mapped as following: - (#) All available GPIO pins are connected to the 16 external - interrupt/event lines from EXTI0 to EXTI15. - (#) EXTI line 16 is connected to the PVD Output - (#) EXTI line 17 is connected to the RTC Alarm event - (#) EXTI line 18 is connected to the USB OTG FS Wakeup from suspend event - (#) EXTI line 19 is connected to the Ethernet Wakeup event - (#) EXTI line 20 is connected to the USB OTG HS (configured in FS) Wakeup event - (#) EXTI line 21 is connected to the RTC Tamper and Time Stamp events - (#) EXTI line 22 is connected to the RTC Wakeup event - - - ##### How to use this driver ##### - =================================================================== - - [..] In order to use an I/O pin as an external interrupt source, follow steps - below: - (#) Configure the I/O in input mode using GPIO_Init() - (#) Select the input source pin for the EXTI line using SYSCFG_EXTILineConfig() - (#) Select the mode(interrupt, event) and configure the trigger - selection (Rising, falling or both) using EXTI_Init() - (#) Configure NVIC IRQ channel mapped to the EXTI line using NVIC_Init() - - [..] - (@) SYSCFG APB clock must be enabled to get write access to SYSCFG_EXTICRx - registers using RCC_APB2PeriphClockCmd(RCC_APB2Periph_SYSCFG, ENABLE); - -@endverbatim - * - ****************************************************************************** - * @attention - * - *

© COPYRIGHT 2013 STMicroelectronics

- * - * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License"); - * You may not use this file except in compliance with the License. - * You may obtain a copy of the License at: - * - * http://www.st.com/software_license_agreement_liberty_v2 - * - * Unless required by applicable law or agreed to in writing, software - * distributed under the License is distributed on an "AS IS" BASIS, - * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - * See the License for the specific language governing permissions and - * limitations under the License. - * - ****************************************************************************** - */ - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx_exti.h" - -/** @addtogroup STM32F4xx_StdPeriph_Driver - * @{ - */ - -/** @defgroup EXTI - * @brief EXTI driver modules - * @{ - */ - -/* Private typedef -----------------------------------------------------------*/ -/* Private define ------------------------------------------------------------*/ - -#define EXTI_LINENONE ((uint32_t)0x00000) /* No interrupt selected */ - -/* Private macro -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -/* Private function prototypes -----------------------------------------------*/ -/* Private functions ---------------------------------------------------------*/ - -/** @defgroup EXTI_Private_Functions - * @{ - */ - -/** @defgroup EXTI_Group1 Initialization and Configuration functions - * @brief Initialization and Configuration functions - * -@verbatim - =============================================================================== - ##### Initialization and Configuration functions ##### - =============================================================================== - -@endverbatim - * @{ - */ - -/** - * @brief Deinitializes the EXTI peripheral registers to their default reset values. - * @param None - * @retval None - */ -void EXTI_DeInit(void) -{ - EXTI->IMR = 0x00000000; - EXTI->EMR = 0x00000000; - EXTI->RTSR = 0x00000000; - EXTI->FTSR = 0x00000000; - EXTI->PR = 0x007FFFFF; -} - -/** - * @brief Initializes the EXTI peripheral according to the specified - * parameters in the EXTI_InitStruct. - * @param EXTI_InitStruct: pointer to a EXTI_InitTypeDef structure - * that contains the configuration information for the EXTI peripheral. - * @retval None - */ -void EXTI_Init(EXTI_InitTypeDef* EXTI_InitStruct) -{ - uint32_t tmp = 0; - - /* Check the parameters */ - assert_param(IS_EXTI_MODE(EXTI_InitStruct->EXTI_Mode)); - assert_param(IS_EXTI_TRIGGER(EXTI_InitStruct->EXTI_Trigger)); - assert_param(IS_EXTI_LINE(EXTI_InitStruct->EXTI_Line)); - assert_param(IS_FUNCTIONAL_STATE(EXTI_InitStruct->EXTI_LineCmd)); - - tmp = (uint32_t)EXTI_BASE; - - if (EXTI_InitStruct->EXTI_LineCmd != DISABLE) - { - /* Clear EXTI line configuration */ - EXTI->IMR &= ~EXTI_InitStruct->EXTI_Line; - EXTI->EMR &= ~EXTI_InitStruct->EXTI_Line; - - tmp += EXTI_InitStruct->EXTI_Mode; - - *(__IO uint32_t *) tmp |= EXTI_InitStruct->EXTI_Line; - - /* Clear Rising Falling edge configuration */ - EXTI->RTSR &= ~EXTI_InitStruct->EXTI_Line; - EXTI->FTSR &= ~EXTI_InitStruct->EXTI_Line; - - /* Select the trigger for the selected external interrupts */ - if (EXTI_InitStruct->EXTI_Trigger == EXTI_Trigger_Rising_Falling) - { - /* Rising Falling edge */ - EXTI->RTSR |= EXTI_InitStruct->EXTI_Line; - EXTI->FTSR |= EXTI_InitStruct->EXTI_Line; - } - else - { - tmp = (uint32_t)EXTI_BASE; - tmp += EXTI_InitStruct->EXTI_Trigger; - - *(__IO uint32_t *) tmp |= EXTI_InitStruct->EXTI_Line; - } - } - else - { - tmp += EXTI_InitStruct->EXTI_Mode; - - /* Disable the selected external lines */ - *(__IO uint32_t *) tmp &= ~EXTI_InitStruct->EXTI_Line; - } -} - -/** - * @brief Fills each EXTI_InitStruct member with its reset value. - * @param EXTI_InitStruct: pointer to a EXTI_InitTypeDef structure which will - * be initialized. - * @retval None - */ -void EXTI_StructInit(EXTI_InitTypeDef* EXTI_InitStruct) -{ - EXTI_InitStruct->EXTI_Line = EXTI_LINENONE; - EXTI_InitStruct->EXTI_Mode = EXTI_Mode_Interrupt; - EXTI_InitStruct->EXTI_Trigger = EXTI_Trigger_Falling; - EXTI_InitStruct->EXTI_LineCmd = DISABLE; -} - -/** - * @brief Generates a Software interrupt on selected EXTI line. - * @param EXTI_Line: specifies the EXTI line on which the software interrupt - * will be generated. - * This parameter can be any combination of EXTI_Linex where x can be (0..22) - * @retval None - */ -void EXTI_GenerateSWInterrupt(uint32_t EXTI_Line) -{ - /* Check the parameters */ - assert_param(IS_EXTI_LINE(EXTI_Line)); - - EXTI->SWIER |= EXTI_Line; -} - -/** - * @} - */ - -/** @defgroup EXTI_Group2 Interrupts and flags management functions - * @brief Interrupts and flags management functions - * -@verbatim - =============================================================================== - ##### Interrupts and flags management functions ##### - =============================================================================== - -@endverbatim - * @{ - */ - -/** - * @brief Checks whether the specified EXTI line flag is set or not. - * @param EXTI_Line: specifies the EXTI line flag to check. - * This parameter can be EXTI_Linex where x can be(0..22) - * @retval The new state of EXTI_Line (SET or RESET). - */ -FlagStatus EXTI_GetFlagStatus(uint32_t EXTI_Line) -{ - FlagStatus bitstatus = RESET; - /* Check the parameters */ - assert_param(IS_GET_EXTI_LINE(EXTI_Line)); - - if ((EXTI->PR & EXTI_Line) != (uint32_t)RESET) - { - bitstatus = SET; - } - else - { - bitstatus = RESET; - } - return bitstatus; -} - -/** - * @brief Clears the EXTI's line pending flags. - * @param EXTI_Line: specifies the EXTI lines flags to clear. - * This parameter can be any combination of EXTI_Linex where x can be (0..22) - * @retval None - */ -void EXTI_ClearFlag(uint32_t EXTI_Line) -{ - /* Check the parameters */ - assert_param(IS_EXTI_LINE(EXTI_Line)); - - EXTI->PR = EXTI_Line; -} - -/** - * @brief Checks whether the specified EXTI line is asserted or not. - * @param EXTI_Line: specifies the EXTI line to check. - * This parameter can be EXTI_Linex where x can be(0..22) - * @retval The new state of EXTI_Line (SET or RESET). - */ -ITStatus EXTI_GetITStatus(uint32_t EXTI_Line) -{ - FlagStatus bitstatus = RESET; - /* Check the parameters */ - assert_param(IS_GET_EXTI_LINE(EXTI_Line)); - - if ((EXTI->PR & EXTI_Line) != (uint32_t)RESET) - { - bitstatus = SET; - } - else - { - bitstatus = RESET; - } - return bitstatus; - -} - -/** - * @brief Clears the EXTI's line pending bits. - * @param EXTI_Line: specifies the EXTI lines to clear. - * This parameter can be any combination of EXTI_Linex where x can be (0..22) - * @retval None - */ -void EXTI_ClearITPendingBit(uint32_t EXTI_Line) -{ - /* Check the parameters */ - assert_param(IS_EXTI_LINE(EXTI_Line)); - - EXTI->PR = EXTI_Line; -} - -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/stm/lib/stm32f4xx_exti.h b/stm/lib/stm32f4xx_exti.h deleted file mode 100644 index 39105e3b7..000000000 --- a/stm/lib/stm32f4xx_exti.h +++ /dev/null @@ -1,183 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f4xx_exti.h - * @author MCD Application Team - * @version V1.3.0 - * @date 08-November-2013 - * @brief This file contains all the functions prototypes for the EXTI firmware - * library. - ****************************************************************************** - * @attention - * - *

© COPYRIGHT 2013 STMicroelectronics

- * - * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License"); - * You may not use this file except in compliance with the License. - * You may obtain a copy of the License at: - * - * http://www.st.com/software_license_agreement_liberty_v2 - * - * Unless required by applicable law or agreed to in writing, software - * distributed under the License is distributed on an "AS IS" BASIS, - * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - * See the License for the specific language governing permissions and - * limitations under the License. - * - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F4xx_EXTI_H -#define __STM32F4xx_EXTI_H - -#ifdef __cplusplus - extern "C" { -#endif - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx.h" - -/** @addtogroup STM32F4xx_StdPeriph_Driver - * @{ - */ - -/** @addtogroup EXTI - * @{ - */ - -/* Exported types ------------------------------------------------------------*/ - -/** - * @brief EXTI mode enumeration - */ - -typedef enum -{ - EXTI_Mode_Interrupt = 0x00, - EXTI_Mode_Event = 0x04 -}EXTIMode_TypeDef; - -#define IS_EXTI_MODE(MODE) (((MODE) == EXTI_Mode_Interrupt) || ((MODE) == EXTI_Mode_Event)) - -/** - * @brief EXTI Trigger enumeration - */ - -typedef enum -{ - EXTI_Trigger_Rising = 0x08, - EXTI_Trigger_Falling = 0x0C, - EXTI_Trigger_Rising_Falling = 0x10 -}EXTITrigger_TypeDef; - -#define IS_EXTI_TRIGGER(TRIGGER) (((TRIGGER) == EXTI_Trigger_Rising) || \ - ((TRIGGER) == EXTI_Trigger_Falling) || \ - ((TRIGGER) == EXTI_Trigger_Rising_Falling)) -/** - * @brief EXTI Init Structure definition - */ - -typedef struct -{ - uint32_t EXTI_Line; /*!< Specifies the EXTI lines to be enabled or disabled. - This parameter can be any combination value of @ref EXTI_Lines */ - - EXTIMode_TypeDef EXTI_Mode; /*!< Specifies the mode for the EXTI lines. - This parameter can be a value of @ref EXTIMode_TypeDef */ - - EXTITrigger_TypeDef EXTI_Trigger; /*!< Specifies the trigger signal active edge for the EXTI lines. - This parameter can be a value of @ref EXTITrigger_TypeDef */ - - FunctionalState EXTI_LineCmd; /*!< Specifies the new state of the selected EXTI lines. - This parameter can be set either to ENABLE or DISABLE */ -}EXTI_InitTypeDef; - -/* Exported constants --------------------------------------------------------*/ - -/** @defgroup EXTI_Exported_Constants - * @{ - */ - -/** @defgroup EXTI_Lines - * @{ - */ - -#define EXTI_Line0 ((uint32_t)0x00001) /*!< External interrupt line 0 */ -#define EXTI_Line1 ((uint32_t)0x00002) /*!< External interrupt line 1 */ -#define EXTI_Line2 ((uint32_t)0x00004) /*!< External interrupt line 2 */ -#define EXTI_Line3 ((uint32_t)0x00008) /*!< External interrupt line 3 */ -#define EXTI_Line4 ((uint32_t)0x00010) /*!< External interrupt line 4 */ -#define EXTI_Line5 ((uint32_t)0x00020) /*!< External interrupt line 5 */ -#define EXTI_Line6 ((uint32_t)0x00040) /*!< External interrupt line 6 */ -#define EXTI_Line7 ((uint32_t)0x00080) /*!< External interrupt line 7 */ -#define EXTI_Line8 ((uint32_t)0x00100) /*!< External interrupt line 8 */ -#define EXTI_Line9 ((uint32_t)0x00200) /*!< External interrupt line 9 */ -#define EXTI_Line10 ((uint32_t)0x00400) /*!< External interrupt line 10 */ -#define EXTI_Line11 ((uint32_t)0x00800) /*!< External interrupt line 11 */ -#define EXTI_Line12 ((uint32_t)0x01000) /*!< External interrupt line 12 */ -#define EXTI_Line13 ((uint32_t)0x02000) /*!< External interrupt line 13 */ -#define EXTI_Line14 ((uint32_t)0x04000) /*!< External interrupt line 14 */ -#define EXTI_Line15 ((uint32_t)0x08000) /*!< External interrupt line 15 */ -#define EXTI_Line16 ((uint32_t)0x10000) /*!< External interrupt line 16 Connected to the PVD Output */ -#define EXTI_Line17 ((uint32_t)0x20000) /*!< External interrupt line 17 Connected to the RTC Alarm event */ -#define EXTI_Line18 ((uint32_t)0x40000) /*!< External interrupt line 18 Connected to the USB OTG FS Wakeup from suspend event */ -#define EXTI_Line19 ((uint32_t)0x80000) /*!< External interrupt line 19 Connected to the Ethernet Wakeup event */ -#define EXTI_Line20 ((uint32_t)0x00100000) /*!< External interrupt line 20 Connected to the USB OTG HS (configured in FS) Wakeup event */ -#define EXTI_Line21 ((uint32_t)0x00200000) /*!< External interrupt line 21 Connected to the RTC Tamper and Time Stamp events */ -#define EXTI_Line22 ((uint32_t)0x00400000) /*!< External interrupt line 22 Connected to the RTC Wakeup event */ - -#define IS_EXTI_LINE(LINE) ((((LINE) & (uint32_t)0xFF800000) == 0x00) && ((LINE) != (uint16_t)0x00)) - -#define IS_GET_EXTI_LINE(LINE) (((LINE) == EXTI_Line0) || ((LINE) == EXTI_Line1) || \ - ((LINE) == EXTI_Line2) || ((LINE) == EXTI_Line3) || \ - ((LINE) == EXTI_Line4) || ((LINE) == EXTI_Line5) || \ - ((LINE) == EXTI_Line6) || ((LINE) == EXTI_Line7) || \ - ((LINE) == EXTI_Line8) || ((LINE) == EXTI_Line9) || \ - ((LINE) == EXTI_Line10) || ((LINE) == EXTI_Line11) || \ - ((LINE) == EXTI_Line12) || ((LINE) == EXTI_Line13) || \ - ((LINE) == EXTI_Line14) || ((LINE) == EXTI_Line15) || \ - ((LINE) == EXTI_Line16) || ((LINE) == EXTI_Line17) || \ - ((LINE) == EXTI_Line18) || ((LINE) == EXTI_Line19) || \ - ((LINE) == EXTI_Line20) || ((LINE) == EXTI_Line21) ||\ - ((LINE) == EXTI_Line22)) - -/** - * @} - */ - -/** - * @} - */ - -/* Exported macro ------------------------------------------------------------*/ -/* Exported functions --------------------------------------------------------*/ - -/* Function used to set the EXTI configuration to the default reset state *****/ -void EXTI_DeInit(void); - -/* Initialization and Configuration functions *********************************/ -void EXTI_Init(EXTI_InitTypeDef* EXTI_InitStruct); -void EXTI_StructInit(EXTI_InitTypeDef* EXTI_InitStruct); -void EXTI_GenerateSWInterrupt(uint32_t EXTI_Line); - -/* Interrupts and flags management functions **********************************/ -FlagStatus EXTI_GetFlagStatus(uint32_t EXTI_Line); -void EXTI_ClearFlag(uint32_t EXTI_Line); -ITStatus EXTI_GetITStatus(uint32_t EXTI_Line); -void EXTI_ClearITPendingBit(uint32_t EXTI_Line); - -#ifdef __cplusplus -} -#endif - -#endif /* __STM32F4xx_EXTI_H */ - -/** - * @} - */ - -/** - * @} - */ - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/stm/lib/stm32f4xx_flash.c b/stm/lib/stm32f4xx_flash.c deleted file mode 100644 index f3551b116..000000000 --- a/stm/lib/stm32f4xx_flash.c +++ /dev/null @@ -1,1580 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f4xx_flash.c - * @author MCD Application Team - * @version V1.3.0 - * @date 08-November-2013 - * @brief This file provides firmware functions to manage the following - * functionalities of the FLASH peripheral: - * + FLASH Interface configuration - * + FLASH Memory Programming - * + Option Bytes Programming - * + Interrupts and flags management - * - @verbatim - =============================================================================== - ##### How to use this driver ##### - =============================================================================== - [..] - This driver provides functions to configure and program the FLASH memory - of all STM32F4xx devices. These functions are split in 4 groups: - - (#) FLASH Interface configuration functions: this group includes the - management of the following features: - (++) Set the latency - (++) Enable/Disable the prefetch buffer - (++) Enable/Disable the Instruction cache and the Data cache - (++) Reset the Instruction cache and the Data cache - - (#) FLASH Memory Programming functions: this group includes all needed - functions to erase and program the main memory: - (++) Lock and Unlock the FLASH interface - (++) Erase function: Erase sector, erase all sectors - (++) Program functions: byte, half word, word and double word - - (#) Option Bytes Programming functions: this group includes all needed - functions to manage the Option Bytes: - (++) Set/Reset the write protection - (++) Set the Read protection Level - (++) Set the BOR level - (++) Program the user Option Bytes - (++) Launch the Option Bytes loader - - (#) Interrupts and flags management functions: this group - includes all needed functions to: - (++) Enable/Disable the FLASH interrupt sources - (++) Get flags status - (++) Clear flags - (++) Get FLASH operation status - (++) Wait for last FLASH operation - @endverbatim - ****************************************************************************** - * @attention - * - *

© COPYRIGHT 2013 STMicroelectronics

- * - * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License"); - * You may not use this file except in compliance with the License. - * You may obtain a copy of the License at: - * - * http://www.st.com/software_license_agreement_liberty_v2 - * - * Unless required by applicable law or agreed to in writing, software - * distributed under the License is distributed on an "AS IS" BASIS, - * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - * See the License for the specific language governing permissions and - * limitations under the License. - * - ****************************************************************************** - */ - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx_flash.h" - -/** @addtogroup STM32F4xx_StdPeriph_Driver - * @{ - */ - -/** @defgroup FLASH - * @brief FLASH driver modules - * @{ - */ - -/* Private typedef -----------------------------------------------------------*/ -/* Private define ------------------------------------------------------------*/ -#define SECTOR_MASK ((uint32_t)0xFFFFFF07) - -/* Private macro -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -/* Private function prototypes -----------------------------------------------*/ -/* Private functions ---------------------------------------------------------*/ - -/** @defgroup FLASH_Private_Functions - * @{ - */ - -/** @defgroup FLASH_Group1 FLASH Interface configuration functions - * @brief FLASH Interface configuration functions - * - -@verbatim - =============================================================================== - ##### FLASH Interface configuration functions ##### - =============================================================================== - [..] - This group includes the following functions: - (+) void FLASH_SetLatency(uint32_t FLASH_Latency) - To correctly read data from FLASH memory, the number of wait states (LATENCY) - must be correctly programmed according to the frequency of the CPU clock - (HCLK) and the supply voltage of the device. - [..] - For STM32F405xx/07xx and STM32F415xx/17xx devices - +-------------------------------------------------------------------------------------+ - | Latency | HCLK clock frequency (MHz) | - | |---------------------------------------------------------------------| - | | voltage range | voltage range | voltage range | voltage range | - | | 2.7 V - 3.6 V | 2.4 V - 2.7 V | 2.1 V - 2.4 V | 1.8 V - 2.1 V | - |---------------|----------------|----------------|-----------------|-----------------| - |0WS(1CPU cycle)|0 < HCLK <= 30 |0 < HCLK <= 24 |0 < HCLK <= 22 |0 < HCLK <= 20 | - |---------------|----------------|----------------|-----------------|-----------------| - |1WS(2CPU cycle)|30 < HCLK <= 60 |24 < HCLK <= 48 |22 < HCLK <= 44 |20 < HCLK <= 40 | - |---------------|----------------|----------------|-----------------|-----------------| - |2WS(3CPU cycle)|60 < HCLK <= 90 |48 < HCLK <= 72 |44 < HCLK <= 66 |40 < HCLK <= 60 | - |---------------|----------------|----------------|-----------------|-----------------| - |3WS(4CPU cycle)|90 < HCLK <= 120|72 < HCLK <= 96 |66 < HCLK <= 88 |60 < HCLK <= 80 | - |---------------|----------------|----------------|-----------------|-----------------| - |4WS(5CPU cycle)|120< HCLK <= 150|96 < HCLK <= 120|88 < HCLK <= 110 |80 < HCLK <= 100 | - |---------------|----------------|----------------|-----------------|-----------------| - |5WS(6CPU cycle)|150< HCLK <= 168|120< HCLK <= 144|110 < HCLK <= 132|100 < HCLK <= 120| - |---------------|----------------|----------------|-----------------|-----------------| - |6WS(7CPU cycle)| NA |144< HCLK <= 168|132 < HCLK <= 154|120 < HCLK <= 140| - |---------------|----------------|----------------|-----------------|-----------------| - |7WS(8CPU cycle)| NA | NA |154 < HCLK <= 168|140 < HCLK <= 160| - +---------------|----------------|----------------|-----------------|-----------------+ - - [..] - For STM32F42xxx/43xxx devices - +-------------------------------------------------------------------------------------+ - | Latency | HCLK clock frequency (MHz) | - | |---------------------------------------------------------------------| - | | voltage range | voltage range | voltage range | voltage range | - | | 2.7 V - 3.6 V | 2.4 V - 2.7 V | 2.1 V - 2.4 V | 1.8 V - 2.1 V | - |---------------|----------------|----------------|-----------------|-----------------| - |0WS(1CPU cycle)|0 < HCLK <= 30 |0 < HCLK <= 24 |0 < HCLK <= 22 |0 < HCLK <= 20 | - |---------------|----------------|----------------|-----------------|-----------------| - |1WS(2CPU cycle)|30 < HCLK <= 60 |24 < HCLK <= 48 |22 < HCLK <= 44 |20 < HCLK <= 40 | - |---------------|----------------|----------------|-----------------|-----------------| - |2WS(3CPU cycle)|60 < HCLK <= 90 |48 < HCLK <= 72 |44 < HCLK <= 66 |40 < HCLK <= 60 | - |---------------|----------------|----------------|-----------------|-----------------| - |3WS(4CPU cycle)|90 < HCLK <= 120|72 < HCLK <= 96 |66 < HCLK <= 88 |60 < HCLK <= 80 | - |---------------|----------------|----------------|-----------------|-----------------| - |4WS(5CPU cycle)|120< HCLK <= 150|96 < HCLK <= 120|88 < HCLK <= 110 |80 < HCLK <= 100 | - |---------------|----------------|----------------|-----------------|-----------------| - |5WS(6CPU cycle)|120< HCLK <= 180|120< HCLK <= 144|110 < HCLK <= 132|100 < HCLK <= 120| - |---------------|----------------|----------------|-----------------|-----------------| - |6WS(7CPU cycle)| NA |144< HCLK <= 168|132 < HCLK <= 154|120 < HCLK <= 140| - |---------------|----------------|----------------|-----------------|-----------------| - |7WS(8CPU cycle)| NA |168< HCLK <= 180|154 < HCLK <= 176|140 < HCLK <= 160| - |---------------|----------------|----------------|-----------------|-----------------| - |8WS(9CPU cycle)| NA | NA |176 < HCLK <= 180|160 < HCLK <= 168| - +-------------------------------------------------------------------------------------+ - - [..] - For STM32F401x devices - +-------------------------------------------------------------------------------------+ - | Latency | HCLK clock frequency (MHz) | - | |---------------------------------------------------------------------| - | | voltage range | voltage range | voltage range | voltage range | - | | 2.7 V - 3.6 V | 2.4 V - 2.7 V | 2.1 V - 2.4 V | 1.8 V - 2.1 V | - |---------------|----------------|----------------|-----------------|-----------------| - |0WS(1CPU cycle)|0 < HCLK <= 30 |0 < HCLK <= 24 |0 < HCLK <= 22 |0 < HCLK <= 20 | - |---------------|----------------|----------------|-----------------|-----------------| - |1WS(2CPU cycle)|30 < HCLK <= 60 |24 < HCLK <= 48 |22 < HCLK <= 44 |20 < HCLK <= 40 | - |---------------|----------------|----------------|-----------------|-----------------| - |2WS(3CPU cycle)|60 < HCLK <= 84 |48 < HCLK <= 72 |44 < HCLK <= 66 |40 < HCLK <= 60 | - |---------------|----------------|----------------|-----------------|-----------------| - |3WS(4CPU cycle)| NA |72 < HCLK <= 84 |66 < HCLK <= 84 |60 < HCLK <= 80 | - |---------------|----------------|----------------|-----------------|-----------------| - |4WS(5CPU cycle)| NA | NA | NA |80 < HCLK <= 84 | - +-------------------------------------------------------------------------------------+ - - [..] - +-------------------------------------------------------------------------------------------------------------------+ - | | voltage range | voltage range | voltage range | voltage range | voltage range 2.7 V - 3.6 V | - | | 2.7 V - 3.6 V | 2.4 V - 2.7 V | 2.1 V - 2.4 V | 1.8 V - 2.1 V | with External Vpp = 9V | - |---------------|----------------|----------------|-----------------|-----------------|-----------------------------| - |Max Parallelism| x32 | x16 | x8 | x64 | - |---------------|----------------|----------------|-----------------|-----------------|-----------------------------| - |PSIZE[1:0] | 10 | 01 | 00 | 11 | - +-------------------------------------------------------------------------------------------------------------------+ - - -@- On STM32F405xx/407xx and STM32F415xx/417xx devices: - (++) when VOS = '0' Scale 2 mode, the maximum value of fHCLK = 144MHz. - (++) when VOS = '1' Scale 1 mode, the maximum value of fHCLK = 168MHz. - [..] - On STM32F42xxx/43xxx devices: - (++) when VOS[1:0] = '0x01' Scale 3 mode, the maximum value of fHCLK is 120MHz. - (++) when VOS[1:0] = '0x10' Scale 2 mode, the maximum value of fHCLK is 144MHz if OverDrive OFF and 168MHz if OverDrive ON. - (++) when VOS[1:0] = '0x11' Scale 1 mode, the maximum value of fHCLK is 168MHz if OverDrive OFF and 180MHz if OverDrive ON. - [..] - On STM32F401x devices: - (++) when VOS[1:0] = '0x01' Scale 3 mode, the maximum value of fHCLK is 60MHz. - (++) when VOS[1:0] = '0x10' Scale 2 mode, the maximum value of fHCLK is 84MHz. - For more details please refer product DataSheet - You can use PWR_MainRegulatorModeConfig() function to control VOS bits. - - (+) void FLASH_PrefetchBufferCmd(FunctionalState NewState) - (+) void FLASH_InstructionCacheCmd(FunctionalState NewState) - (+) void FLASH_DataCacheCmd(FunctionalState NewState) - (+) void FLASH_InstructionCacheReset(void) - (+) void FLASH_DataCacheReset(void) - - [..] - The unlock sequence is not needed for these functions. - -@endverbatim - * @{ - */ - -/** - * @brief Sets the code latency value. - * @param FLASH_Latency: specifies the FLASH Latency value. - * This parameter can be one of the following values: - * @arg FLASH_Latency_0: FLASH Zero Latency cycle - * @arg FLASH_Latency_1: FLASH One Latency cycle - * @arg FLASH_Latency_2: FLASH Two Latency cycles - * @arg FLASH_Latency_3: FLASH Three Latency cycles - * @arg FLASH_Latency_4: FLASH Four Latency cycles - * @arg FLASH_Latency_5: FLASH Five Latency cycles - * @arg FLASH_Latency_6: FLASH Six Latency cycles - * @arg FLASH_Latency_7: FLASH Seven Latency cycles - * @arg FLASH_Latency_8: FLASH Eight Latency cycles - * @arg FLASH_Latency_9: FLASH Nine Latency cycles - * @arg FLASH_Latency_10: FLASH Teen Latency cycles - * @arg FLASH_Latency_11: FLASH Eleven Latency cycles - * @arg FLASH_Latency_12: FLASH Twelve Latency cycles - * @arg FLASH_Latency_13: FLASH Thirteen Latency cycles - * @arg FLASH_Latency_14: FLASH Fourteen Latency cycles - * @arg FLASH_Latency_15: FLASH Fifteen Latency cycles - * - * @note For STM32F405xx/407xx, STM32F415xx/417xx and STM32F401xx devices this parameter - * can be a value between FLASH_Latency_0 and FLASH_Latency_7. - * - * @note For STM32F42xxx/43xxx devices this parameter can be a value between - * FLASH_Latency_0 and FLASH_Latency_15. - * - * @retval None - */ -void FLASH_SetLatency(uint32_t FLASH_Latency) -{ - /* Check the parameters */ - assert_param(IS_FLASH_LATENCY(FLASH_Latency)); - - /* Perform Byte access to FLASH_ACR[8:0] to set the Latency value */ - *(__IO uint8_t *)ACR_BYTE0_ADDRESS = (uint8_t)FLASH_Latency; -} - -/** - * @brief Enables or disables the Prefetch Buffer. - * @param NewState: new state of the Prefetch Buffer. - * This parameter can be: ENABLE or DISABLE. - * @retval None - */ -void FLASH_PrefetchBufferCmd(FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_FUNCTIONAL_STATE(NewState)); - - /* Enable or disable the Prefetch Buffer */ - if(NewState != DISABLE) - { - FLASH->ACR |= FLASH_ACR_PRFTEN; - } - else - { - FLASH->ACR &= (~FLASH_ACR_PRFTEN); - } -} - -/** - * @brief Enables or disables the Instruction Cache feature. - * @param NewState: new state of the Instruction Cache. - * This parameter can be: ENABLE or DISABLE. - * @retval None - */ -void FLASH_InstructionCacheCmd(FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_FUNCTIONAL_STATE(NewState)); - - if(NewState != DISABLE) - { - FLASH->ACR |= FLASH_ACR_ICEN; - } - else - { - FLASH->ACR &= (~FLASH_ACR_ICEN); - } -} - -/** - * @brief Enables or disables the Data Cache feature. - * @param NewState: new state of the Data Cache. - * This parameter can be: ENABLE or DISABLE. - * @retval None - */ -void FLASH_DataCacheCmd(FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_FUNCTIONAL_STATE(NewState)); - - if(NewState != DISABLE) - { - FLASH->ACR |= FLASH_ACR_DCEN; - } - else - { - FLASH->ACR &= (~FLASH_ACR_DCEN); - } -} - -/** - * @brief Resets the Instruction Cache. - * @note This function must be used only when the Instruction Cache is disabled. - * @param None - * @retval None - */ -void FLASH_InstructionCacheReset(void) -{ - FLASH->ACR |= FLASH_ACR_ICRST; -} - -/** - * @brief Resets the Data Cache. - * @note This function must be used only when the Data Cache is disabled. - * @param None - * @retval None - */ -void FLASH_DataCacheReset(void) -{ - FLASH->ACR |= FLASH_ACR_DCRST; -} - -/** - * @} - */ - -/** @defgroup FLASH_Group2 FLASH Memory Programming functions - * @brief FLASH Memory Programming functions - * -@verbatim - =============================================================================== - ##### FLASH Memory Programming functions ##### - =============================================================================== - [..] - This group includes the following functions: - (+) void FLASH_Unlock(void) - (+) void FLASH_Lock(void) - (+) FLASH_Status FLASH_EraseSector(uint32_t FLASH_Sector, uint8_t VoltageRange) - (+) FLASH_Status FLASH_EraseAllSectors(uint8_t VoltageRange) - (+) FLASH_Status FLASH_ProgramDoubleWord(uint32_t Address, uint64_t Data) - (+) FLASH_Status FLASH_ProgramWord(uint32_t Address, uint32_t Data) - (+) FLASH_Status FLASH_ProgramHalfWord(uint32_t Address, uint16_t Data) - (+) FLASH_Status FLASH_ProgramByte(uint32_t Address, uint8_t Data) - The following functions can be used only for STM32F42xxx/43xxx devices. - (+) FLASH_Status FLASH_EraseAllBank1Sectors(uint8_t VoltageRange) - (+) FLASH_Status FLASH_EraseAllBank2Sectors(uint8_t VoltageRange) - [..] - Any operation of erase or program should follow these steps: - (#) Call the FLASH_Unlock() function to enable the FLASH control register access - - (#) Call the desired function to erase sector(s) or program data - - (#) Call the FLASH_Lock() function to disable the FLASH control register access - (recommended to protect the FLASH memory against possible unwanted operation) - -@endverbatim - * @{ - */ - -/** - * @brief Unlocks the FLASH control register access - * @param None - * @retval None - */ -void FLASH_Unlock(void) -{ - if((FLASH->CR & FLASH_CR_LOCK) != RESET) - { - /* Authorize the FLASH Registers access */ - FLASH->KEYR = FLASH_KEY1; - FLASH->KEYR = FLASH_KEY2; - } -} - -/** - * @brief Locks the FLASH control register access - * @param None - * @retval None - */ -void FLASH_Lock(void) -{ - /* Set the LOCK Bit to lock the FLASH Registers access */ - FLASH->CR |= FLASH_CR_LOCK; -} - -/** - * @brief Erases a specified FLASH Sector. - * - * @note If an erase and a program operations are requested simustaneously, - * the erase operation is performed before the program one. - * - * @param FLASH_Sector: The Sector number to be erased. - * - * @note For STM32F405xx/407xx and STM32F415xx/417xx devices this parameter can - * be a value between FLASH_Sector_0 and FLASH_Sector_11. - * - * For STM32F42xxx/43xxx devices this parameter can be a value between - * FLASH_Sector_0 and FLASH_Sector_23. - * - * For STM32F401xx devices this parameter can be a value between - * FLASH_Sector_0 and FLASH_Sector_5. - * - * @param VoltageRange: The device voltage range which defines the erase parallelism. - * This parameter can be one of the following values: - * @arg VoltageRange_1: when the device voltage range is 1.8V to 2.1V, - * the operation will be done by byte (8-bit) - * @arg VoltageRange_2: when the device voltage range is 2.1V to 2.7V, - * the operation will be done by half word (16-bit) - * @arg VoltageRange_3: when the device voltage range is 2.7V to 3.6V, - * the operation will be done by word (32-bit) - * @arg VoltageRange_4: when the device voltage range is 2.7V to 3.6V + External Vpp, - * the operation will be done by double word (64-bit) - * - * @retval FLASH Status: The returned value can be: FLASH_BUSY, FLASH_ERROR_PROGRAM, - * FLASH_ERROR_WRP, FLASH_ERROR_OPERATION or FLASH_COMPLETE. - */ -FLASH_Status FLASH_EraseSector(uint32_t FLASH_Sector, uint8_t VoltageRange) -{ - uint32_t tmp_psize = 0x0; - FLASH_Status status = FLASH_COMPLETE; - - /* Check the parameters */ - assert_param(IS_FLASH_SECTOR(FLASH_Sector)); - assert_param(IS_VOLTAGERANGE(VoltageRange)); - - if(VoltageRange == VoltageRange_1) - { - tmp_psize = FLASH_PSIZE_BYTE; - } - else if(VoltageRange == VoltageRange_2) - { - tmp_psize = FLASH_PSIZE_HALF_WORD; - } - else if(VoltageRange == VoltageRange_3) - { - tmp_psize = FLASH_PSIZE_WORD; - } - else - { - tmp_psize = FLASH_PSIZE_DOUBLE_WORD; - } - /* Wait for last operation to be completed */ - status = FLASH_WaitForLastOperation(); - - if(status == FLASH_COMPLETE) - { - /* if the previous operation is completed, proceed to erase the sector */ - FLASH->CR &= CR_PSIZE_MASK; - FLASH->CR |= tmp_psize; - FLASH->CR &= SECTOR_MASK; - FLASH->CR |= FLASH_CR_SER | FLASH_Sector; - FLASH->CR |= FLASH_CR_STRT; - - /* Wait for last operation to be completed */ - status = FLASH_WaitForLastOperation(); - - /* if the erase operation is completed, disable the SER Bit */ - FLASH->CR &= (~FLASH_CR_SER); - FLASH->CR &= SECTOR_MASK; - } - /* Return the Erase Status */ - return status; -} - -/** - * @brief Erases all FLASH Sectors. - * - * @note If an erase and a program operations are requested simustaneously, - * the erase operation is performed before the program one. - * - * @param VoltageRange: The device voltage range which defines the erase parallelism. - * This parameter can be one of the following values: - * @arg VoltageRange_1: when the device voltage range is 1.8V to 2.1V, - * the operation will be done by byte (8-bit) - * @arg VoltageRange_2: when the device voltage range is 2.1V to 2.7V, - * the operation will be done by half word (16-bit) - * @arg VoltageRange_3: when the device voltage range is 2.7V to 3.6V, - * the operation will be done by word (32-bit) - * @arg VoltageRange_4: when the device voltage range is 2.7V to 3.6V + External Vpp, - * the operation will be done by double word (64-bit) - * - * @retval FLASH Status: The returned value can be: FLASH_BUSY, FLASH_ERROR_PROGRAM, - * FLASH_ERROR_WRP, FLASH_ERROR_OPERATION or FLASH_COMPLETE. - */ -FLASH_Status FLASH_EraseAllSectors(uint8_t VoltageRange) -{ - uint32_t tmp_psize = 0x0; - FLASH_Status status = FLASH_COMPLETE; - - /* Wait for last operation to be completed */ - status = FLASH_WaitForLastOperation(); - assert_param(IS_VOLTAGERANGE(VoltageRange)); - - if(VoltageRange == VoltageRange_1) - { - tmp_psize = FLASH_PSIZE_BYTE; - } - else if(VoltageRange == VoltageRange_2) - { - tmp_psize = FLASH_PSIZE_HALF_WORD; - } - else if(VoltageRange == VoltageRange_3) - { - tmp_psize = FLASH_PSIZE_WORD; - } - else - { - tmp_psize = FLASH_PSIZE_DOUBLE_WORD; - } - if(status == FLASH_COMPLETE) - { - /* if the previous operation is completed, proceed to erase all sectors */ -#if defined (STM32F427_437xx) || defined (STM32F429_439xx) - FLASH->CR &= CR_PSIZE_MASK; - FLASH->CR |= tmp_psize; - FLASH->CR |= (FLASH_CR_MER1 | FLASH_CR_MER2); - FLASH->CR |= FLASH_CR_STRT; - - /* Wait for last operation to be completed */ - status = FLASH_WaitForLastOperation(); - - /* if the erase operation is completed, disable the MER Bit */ - FLASH->CR &= ~(FLASH_CR_MER1 | FLASH_CR_MER2); -#endif /* STM32F427_437xx || STM32F429_439xx */ - -#if defined (STM32F40_41xxx) || defined (STM32F401xx) - FLASH->CR &= CR_PSIZE_MASK; - FLASH->CR |= tmp_psize; - FLASH->CR |= FLASH_CR_MER; - FLASH->CR |= FLASH_CR_STRT; - - /* Wait for last operation to be completed */ - status = FLASH_WaitForLastOperation(); - - /* if the erase operation is completed, disable the MER Bit */ - FLASH->CR &= (~FLASH_CR_MER); -#endif /* STM32F40_41xxx || STM32F401xx */ - - } - /* Return the Erase Status */ - return status; -} - -/** - * @brief Erases all FLASH Sectors in Bank 1. - * - * @note This function can be used only for STM32F42xxx/43xxx devices. - * - * @note If an erase and a program operations are requested simultaneously, - * the erase operation is performed before the program one. - * - * @param VoltageRange: The device voltage range which defines the erase parallelism. - * This parameter can be one of the following values: - * @arg VoltageRange_1: when the device voltage range is 1.8V to 2.1V, - * the operation will be done by byte (8-bit) - * @arg VoltageRange_2: when the device voltage range is 2.1V to 2.7V, - * the operation will be done by half word (16-bit) - * @arg VoltageRange_3: when the device voltage range is 2.7V to 3.6V, - * the operation will be done by word (32-bit) - * @arg VoltageRange_4: when the device voltage range is 2.7V to 3.6V + External Vpp, - * the operation will be done by double word (64-bit) - * - * @retval FLASH Status: The returned value can be: FLASH_BUSY, FLASH_ERROR_PROGRAM, - * FLASH_ERROR_WRP, FLASH_ERROR_OPERATION or FLASH_COMPLETE. - */ -FLASH_Status FLASH_EraseAllBank1Sectors(uint8_t VoltageRange) -{ - uint32_t tmp_psize = 0x0; - FLASH_Status status = FLASH_COMPLETE; - - /* Wait for last operation to be completed */ - status = FLASH_WaitForLastOperation(); - assert_param(IS_VOLTAGERANGE(VoltageRange)); - - if(VoltageRange == VoltageRange_1) - { - tmp_psize = FLASH_PSIZE_BYTE; - } - else if(VoltageRange == VoltageRange_2) - { - tmp_psize = FLASH_PSIZE_HALF_WORD; - } - else if(VoltageRange == VoltageRange_3) - { - tmp_psize = FLASH_PSIZE_WORD; - } - else - { - tmp_psize = FLASH_PSIZE_DOUBLE_WORD; - } - if(status == FLASH_COMPLETE) - { - /* if the previous operation is completed, proceed to erase all sectors */ - FLASH->CR &= CR_PSIZE_MASK; - FLASH->CR |= tmp_psize; - FLASH->CR |= FLASH_CR_MER1; - FLASH->CR |= FLASH_CR_STRT; - - /* Wait for last operation to be completed */ - status = FLASH_WaitForLastOperation(); - - /* if the erase operation is completed, disable the MER Bit */ - FLASH->CR &= (~FLASH_CR_MER1); - - } - /* Return the Erase Status */ - return status; -} - - -/** - * @brief Erases all FLASH Sectors in Bank 2. - * - * @note This function can be used only for STM32F42xxx/43xxx devices. - * - * @note If an erase and a program operations are requested simultaneously, - * the erase operation is performed before the program one. - * - * @param VoltageRange: The device voltage range which defines the erase parallelism. - * This parameter can be one of the following values: - * @arg VoltageRange_1: when the device voltage range is 1.8V to 2.1V, - * the operation will be done by byte (8-bit) - * @arg VoltageRange_2: when the device voltage range is 2.1V to 2.7V, - * the operation will be done by half word (16-bit) - * @arg VoltageRange_3: when the device voltage range is 2.7V to 3.6V, - * the operation will be done by word (32-bit) - * @arg VoltageRange_4: when the device voltage range is 2.7V to 3.6V + External Vpp, - * the operation will be done by double word (64-bit) - * - * @retval FLASH Status: The returned value can be: FLASH_BUSY, FLASH_ERROR_PROGRAM, - * FLASH_ERROR_WRP, FLASH_ERROR_OPERATION or FLASH_COMPLETE. - */ -FLASH_Status FLASH_EraseAllBank2Sectors(uint8_t VoltageRange) -{ - uint32_t tmp_psize = 0x0; - FLASH_Status status = FLASH_COMPLETE; - - /* Wait for last operation to be completed */ - status = FLASH_WaitForLastOperation(); - assert_param(IS_VOLTAGERANGE(VoltageRange)); - - if(VoltageRange == VoltageRange_1) - { - tmp_psize = FLASH_PSIZE_BYTE; - } - else if(VoltageRange == VoltageRange_2) - { - tmp_psize = FLASH_PSIZE_HALF_WORD; - } - else if(VoltageRange == VoltageRange_3) - { - tmp_psize = FLASH_PSIZE_WORD; - } - else - { - tmp_psize = FLASH_PSIZE_DOUBLE_WORD; - } - if(status == FLASH_COMPLETE) - { - /* if the previous operation is completed, proceed to erase all sectors */ - FLASH->CR &= CR_PSIZE_MASK; - FLASH->CR |= tmp_psize; - FLASH->CR |= FLASH_CR_MER2; - FLASH->CR |= FLASH_CR_STRT; - - /* Wait for last operation to be completed */ - status = FLASH_WaitForLastOperation(); - - /* if the erase operation is completed, disable the MER Bit */ - FLASH->CR &= (~FLASH_CR_MER2); - - } - /* Return the Erase Status */ - return status; -} - -/** - * @brief Programs a double word (64-bit) at a specified address. - * @note This function must be used when the device voltage range is from - * 2.7V to 3.6V and an External Vpp is present. - * - * @note If an erase and a program operations are requested simustaneously, - * the erase operation is performed before the program one. - * - * @param Address: specifies the address to be programmed. - * @param Data: specifies the data to be programmed. - * @retval FLASH Status: The returned value can be: FLASH_BUSY, FLASH_ERROR_PROGRAM, - * FLASH_ERROR_WRP, FLASH_ERROR_OPERATION or FLASH_COMPLETE. - */ -FLASH_Status FLASH_ProgramDoubleWord(uint32_t Address, uint64_t Data) -{ - FLASH_Status status = FLASH_COMPLETE; - - /* Check the parameters */ - assert_param(IS_FLASH_ADDRESS(Address)); - - /* Wait for last operation to be completed */ - status = FLASH_WaitForLastOperation(); - - if(status == FLASH_COMPLETE) - { - /* if the previous operation is completed, proceed to program the new data */ - FLASH->CR &= CR_PSIZE_MASK; - FLASH->CR |= FLASH_PSIZE_DOUBLE_WORD; - FLASH->CR |= FLASH_CR_PG; - - *(__IO uint64_t*)Address = Data; - - /* Wait for last operation to be completed */ - status = FLASH_WaitForLastOperation(); - - /* if the program operation is completed, disable the PG Bit */ - FLASH->CR &= (~FLASH_CR_PG); - } - /* Return the Program Status */ - return status; -} - -/** - * @brief Programs a word (32-bit) at a specified address. - * - * @note This function must be used when the device voltage range is from 2.7V to 3.6V. - * - * @note If an erase and a program operations are requested simustaneously, - * the erase operation is performed before the program one. - * - * @param Address: specifies the address to be programmed. - * This parameter can be any address in Program memory zone or in OTP zone. - * @param Data: specifies the data to be programmed. - * @retval FLASH Status: The returned value can be: FLASH_BUSY, FLASH_ERROR_PROGRAM, - * FLASH_ERROR_WRP, FLASH_ERROR_OPERATION or FLASH_COMPLETE. - */ -FLASH_Status FLASH_ProgramWord(uint32_t Address, uint32_t Data) -{ - FLASH_Status status = FLASH_COMPLETE; - - /* Check the parameters */ - assert_param(IS_FLASH_ADDRESS(Address)); - - /* Wait for last operation to be completed */ - status = FLASH_WaitForLastOperation(); - - if(status == FLASH_COMPLETE) - { - /* if the previous operation is completed, proceed to program the new data */ - FLASH->CR &= CR_PSIZE_MASK; - FLASH->CR |= FLASH_PSIZE_WORD; - FLASH->CR |= FLASH_CR_PG; - - *(__IO uint32_t*)Address = Data; - - /* Wait for last operation to be completed */ - status = FLASH_WaitForLastOperation(); - - /* if the program operation is completed, disable the PG Bit */ - FLASH->CR &= (~FLASH_CR_PG); - } - /* Return the Program Status */ - return status; -} - -/** - * @brief Programs a half word (16-bit) at a specified address. - * @note This function must be used when the device voltage range is from 2.1V to 3.6V. - * - * @note If an erase and a program operations are requested simustaneously, - * the erase operation is performed before the program one. - * - * @param Address: specifies the address to be programmed. - * This parameter can be any address in Program memory zone or in OTP zone. - * @param Data: specifies the data to be programmed. - * @retval FLASH Status: The returned value can be: FLASH_BUSY, FLASH_ERROR_PROGRAM, - * FLASH_ERROR_WRP, FLASH_ERROR_OPERATION or FLASH_COMPLETE. - */ -FLASH_Status FLASH_ProgramHalfWord(uint32_t Address, uint16_t Data) -{ - FLASH_Status status = FLASH_COMPLETE; - - /* Check the parameters */ - assert_param(IS_FLASH_ADDRESS(Address)); - - /* Wait for last operation to be completed */ - status = FLASH_WaitForLastOperation(); - - if(status == FLASH_COMPLETE) - { - /* if the previous operation is completed, proceed to program the new data */ - FLASH->CR &= CR_PSIZE_MASK; - FLASH->CR |= FLASH_PSIZE_HALF_WORD; - FLASH->CR |= FLASH_CR_PG; - - *(__IO uint16_t*)Address = Data; - - /* Wait for last operation to be completed */ - status = FLASH_WaitForLastOperation(); - - /* if the program operation is completed, disable the PG Bit */ - FLASH->CR &= (~FLASH_CR_PG); - } - /* Return the Program Status */ - return status; -} - -/** - * @brief Programs a byte (8-bit) at a specified address. - * @note This function can be used within all the device supply voltage ranges. - * - * @note If an erase and a program operations are requested simustaneously, - * the erase operation is performed before the program one. - * - * @param Address: specifies the address to be programmed. - * This parameter can be any address in Program memory zone or in OTP zone. - * @param Data: specifies the data to be programmed. - * @retval FLASH Status: The returned value can be: FLASH_BUSY, FLASH_ERROR_PROGRAM, - * FLASH_ERROR_WRP, FLASH_ERROR_OPERATION or FLASH_COMPLETE. - */ -FLASH_Status FLASH_ProgramByte(uint32_t Address, uint8_t Data) -{ - FLASH_Status status = FLASH_COMPLETE; - - /* Check the parameters */ - assert_param(IS_FLASH_ADDRESS(Address)); - - /* Wait for last operation to be completed */ - status = FLASH_WaitForLastOperation(); - - if(status == FLASH_COMPLETE) - { - /* if the previous operation is completed, proceed to program the new data */ - FLASH->CR &= CR_PSIZE_MASK; - FLASH->CR |= FLASH_PSIZE_BYTE; - FLASH->CR |= FLASH_CR_PG; - - *(__IO uint8_t*)Address = Data; - - /* Wait for last operation to be completed */ - status = FLASH_WaitForLastOperation(); - - /* if the program operation is completed, disable the PG Bit */ - FLASH->CR &= (~FLASH_CR_PG); - } - - /* Return the Program Status */ - return status; -} - -/** - * @} - */ - -/** @defgroup FLASH_Group3 Option Bytes Programming functions - * @brief Option Bytes Programming functions - * -@verbatim - =============================================================================== - ##### Option Bytes Programming functions ##### - =============================================================================== - [..] - This group includes the following functions: - (+) void FLASH_OB_Unlock(void) - (+) void FLASH_OB_Lock(void) - (+) void FLASH_OB_WRPConfig(uint32_t OB_WRP, FunctionalState NewState) - (+) void FLASH_OB_WRP1Config(uint32_t OB_WRP, FunctionalState NewState) - (+) void FLASH_OB_PCROPSelectionConfig(uint8_t OB_PCROPSelect) - (+) void FLASH_OB_PCROPConfig(uint32_t OB_PCROP, FunctionalState NewState) - (+) void FLASH_OB_PCROP1Config(uint32_t OB_PCROP, FunctionalState NewState) - (+) void FLASH_OB_RDPConfig(uint8_t OB_RDP) - (+) void FLASH_OB_UserConfig(uint8_t OB_IWDG, uint8_t OB_STOP, uint8_t OB_STDBY) - (+) void FLASH_OB_BORConfig(uint8_t OB_BOR) - (+) FLASH_Status FLASH_ProgramOTP(uint32_t Address, uint32_t Data) - (+) FLASH_Status FLASH_OB_Launch(void) - (+) uint32_t FLASH_OB_GetUser(void) - (+) uint8_t FLASH_OB_GetWRP(void) - (+) uint8_t FLASH_OB_GetWRP1(void) - (+) uint8_t FLASH_OB_GetPCROP(void) - (+) uint8_t FLASH_OB_GetPCROP1(void) - (+) uint8_t FLASH_OB_GetRDP(void) - (+) uint8_t FLASH_OB_GetBOR(void) - [..] - The following function can be used only for STM32F42xxx/43xxx devices. - (+) void FLASH_OB_BootConfig(uint8_t OB_BOOT) - [..] - Any operation of erase or program should follow these steps: - (#) Call the FLASH_OB_Unlock() function to enable the FLASH option control - register access - - (#) Call one or several functions to program the desired Option Bytes: - (++) void FLASH_OB_WRPConfig(uint32_t OB_WRP, FunctionalState NewState) - => to Enable/Disable the desired sector write protection - (++) void FLASH_OB_RDPConfig(uint8_t OB_RDP) => to set the desired read - Protection Level - (++) void FLASH_OB_UserConfig(uint8_t OB_IWDG, uint8_t OB_STOP, uint8_t OB_STDBY) - => to configure the user Option Bytes. - (++) void FLASH_OB_BORConfig(uint8_t OB_BOR) => to set the BOR Level - - (#) Once all needed Option Bytes to be programmed are correctly written, - call the FLASH_OB_Launch() function to launch the Option Bytes - programming process. - - -@- When changing the IWDG mode from HW to SW or from SW to HW, a system - reset is needed to make the change effective. - - (#) Call the FLASH_OB_Lock() function to disable the FLASH option control - register access (recommended to protect the Option Bytes against - possible unwanted operations) - -@endverbatim - * @{ - */ - -/** - * @brief Unlocks the FLASH Option Control Registers access. - * @param None - * @retval None - */ -void FLASH_OB_Unlock(void) -{ - if((FLASH->OPTCR & FLASH_OPTCR_OPTLOCK) != RESET) - { - /* Authorizes the Option Byte register programming */ - FLASH->OPTKEYR = FLASH_OPT_KEY1; - FLASH->OPTKEYR = FLASH_OPT_KEY2; - } -} - -/** - * @brief Locks the FLASH Option Control Registers access. - * @param None - * @retval None - */ -void FLASH_OB_Lock(void) -{ - /* Set the OPTLOCK Bit to lock the FLASH Option Byte Registers access */ - FLASH->OPTCR |= FLASH_OPTCR_OPTLOCK; -} - -/** - * @brief Enables or disables the write protection of the desired sectors, for the first - * 1 Mb of the Flash - * - * @note When the memory read protection level is selected (RDP level = 1), - * it is not possible to program or erase the flash sector i if CortexM4 - * debug features are connected or boot code is executed in RAM, even if nWRPi = 1 - * @note Active value of nWRPi bits is inverted when PCROP mode is active (SPRMOD =1). - * - * @param OB_WRP: specifies the sector(s) to be write protected or unprotected. - * This parameter can be one of the following values: - * @arg OB_WRP: A value between OB_WRP_Sector0 and OB_WRP_Sector11 - * @arg OB_WRP_Sector_All - * @param Newstate: new state of the Write Protection. - * This parameter can be: ENABLE or DISABLE. - * @retval None - */ -void FLASH_OB_WRPConfig(uint32_t OB_WRP, FunctionalState NewState) -{ - FLASH_Status status = FLASH_COMPLETE; - - /* Check the parameters */ - assert_param(IS_OB_WRP(OB_WRP)); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - - status = FLASH_WaitForLastOperation(); - - if(status == FLASH_COMPLETE) - { - if(NewState != DISABLE) - { - *(__IO uint16_t*)OPTCR_BYTE2_ADDRESS &= (~OB_WRP); - } - else - { - *(__IO uint16_t*)OPTCR_BYTE2_ADDRESS |= (uint16_t)OB_WRP; - } - } -} - -/** - * @brief Enables or disables the write protection of the desired sectors, for the second - * 1 Mb of the Flash - * - * @note This function can be used only for STM32F42xxx/43xxx devices. - * - * @note When the memory read out protection is selected (RDP level = 1), - * it is not possible to program or erase the flash sector i if CortexM4 - * debug features are connected or boot code is executed in RAM, even if nWRPi = 1 - * @note Active value of nWRPi bits is inverted when PCROP mode is active (SPRMOD =1). - * - * @param OB_WRP: specifies the sector(s) to be write protected or unprotected. - * This parameter can be one of the following values: - * @arg OB_WRP: A value between OB_WRP_Sector12 and OB_WRP_Sector23 - * @arg OB_WRP_Sector_All - * @param Newstate: new state of the Write Protection. - * This parameter can be: ENABLE or DISABLE. - * @retval None - */ -void FLASH_OB_WRP1Config(uint32_t OB_WRP, FunctionalState NewState) -{ - FLASH_Status status = FLASH_COMPLETE; - - /* Check the parameters */ - assert_param(IS_OB_WRP(OB_WRP)); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - - status = FLASH_WaitForLastOperation(); - - if(status == FLASH_COMPLETE) - { - if(NewState != DISABLE) - { - *(__IO uint16_t*)OPTCR1_BYTE2_ADDRESS &= (~OB_WRP); - } - else - { - *(__IO uint16_t*)OPTCR1_BYTE2_ADDRESS |= (uint16_t)OB_WRP; - } - } -} - -/** - * @brief Select the Protection Mode (SPRMOD). - * - * @note This function can be used only for STM32F42xxx/43xxx and STM32F401xx devices. - * - * @note After PCROP activation, Option Byte modification is not possible. - * Exception made for the global Read Out Protection modification level (level1 to level0) - * @note Once SPRMOD bit is active unprotection of a protected sector is not possible - * - * @note Read a protected sector will set RDERR Flag and write a protected sector will set WRPERR Flag - * - * @note Some Precautions should be taken when activating the PCROP feature : - * The active value of nWRPi bits is inverted when PCROP mode is active, this means if SPRMOD = 1 - * and WRPi = 1 (default value), then the user sector i is read/write protected. - * In order to avoid activation of PCROP Mode for undesired sectors, please follow the - * below safety sequence : - * - Disable PCROP for all Sectors using FLASH_OB_PCROPConfig(OB_PCROP_Sector_All, DISABLE) function - * for Bank1 or FLASH_OB_PCROP1Config(OB_PCROP_Sector_All, DISABLE) function for Bank2 - * - Enable PCROP for the desired Sector i using FLASH_OB_PCROPConfig(Sector i, ENABLE) function - * - Activate the PCROP Mode FLASH_OB_PCROPSelectionConfig() function. - * - * @param OB_PCROP: Select the Protection Mode of nWPRi bits - * This parameter can be one of the following values: - * @arg OB_PcROP_Disable: nWRPi control the write protection of respective user sectors. - * @arg OB_PcROP_Enable: nWRPi control the read&write protection (PCROP) of respective user sectors. - * @retval None - */ -void FLASH_OB_PCROPSelectionConfig(uint8_t OB_PcROP) -{ - uint8_t optiontmp = 0xFF; - - /* Check the parameters */ - assert_param(IS_OB_PCROP_SELECT(OB_PcROP)); - - /* Mask SPRMOD bit */ - optiontmp = (uint8_t)((*(__IO uint8_t *)OPTCR_BYTE3_ADDRESS) & (uint8_t)0x7F); - /* Update Option Byte */ - *(__IO uint8_t *)OPTCR_BYTE3_ADDRESS = (uint8_t)(OB_PcROP | optiontmp); - -} - -/** - * @brief Enables or disables the read/write protection (PCROP) of the desired - * sectors, for the first 1 MB of the Flash. - * - * @note This function can be used only for STM32F42xxx/43xxx and STM32F401xx devices. - * - * @param OB_PCROP: specifies the sector(s) to be read/write protected or unprotected. - * This parameter can be one of the following values: - * @arg OB_PCROP: A value between OB_PCROP_Sector0 and OB_PCROP_Sector11 for - * STM32F42xxx/43xxx devices and between OB_PCROP_Sector0 and - * OB_PCROP_Sector5 for STM32F401xx devices. - * @arg OB_PCROP_Sector_All - * @param Newstate: new state of the Write Protection. - * This parameter can be: ENABLE or DISABLE. - * @retval None - */ -void FLASH_OB_PCROPConfig(uint32_t OB_PCROP, FunctionalState NewState) -{ - FLASH_Status status = FLASH_COMPLETE; - - /* Check the parameters */ - assert_param(IS_OB_PCROP(OB_PCROP)); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - - status = FLASH_WaitForLastOperation(); - - if(status == FLASH_COMPLETE) - { - if(NewState != DISABLE) - { - *(__IO uint16_t*)OPTCR_BYTE2_ADDRESS |= (uint16_t)OB_PCROP; - } - else - { - *(__IO uint16_t*)OPTCR_BYTE2_ADDRESS &= (~OB_PCROP); - } - } -} - -/** - * @brief Enables or disables the read/write protection (PCROP) of the desired - * sectors - * - * @note This function can be used only for STM32F42xxx/43xxx devices. - * - * @param OB_PCROP: specifies the sector(s) to be read/write protected or unprotected. - * This parameter can be one of the following values: - * @arg OB_PCROP: A value between OB_PCROP_Sector12 and OB_PCROP_Sector23 - * @arg OB_PCROP_Sector_All - * @param Newstate: new state of the Write Protection. - * This parameter can be: ENABLE or DISABLE. - * @retval None - */ -void FLASH_OB_PCROP1Config(uint32_t OB_PCROP, FunctionalState NewState) -{ - FLASH_Status status = FLASH_COMPLETE; - - /* Check the parameters */ - assert_param(IS_OB_PCROP(OB_PCROP)); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - - status = FLASH_WaitForLastOperation(); - - if(status == FLASH_COMPLETE) - { - if(NewState != DISABLE) - { - *(__IO uint16_t*)OPTCR1_BYTE2_ADDRESS |= (uint16_t)OB_PCROP; - } - else - { - *(__IO uint16_t*)OPTCR1_BYTE2_ADDRESS &= (~OB_PCROP); - } - } -} - - -/** - * @brief Sets the read protection level. - * @param OB_RDP: specifies the read protection level. - * This parameter can be one of the following values: - * @arg OB_RDP_Level_0: No protection - * @arg OB_RDP_Level_1: Read protection of the memory - * @arg OB_RDP_Level_2: Full chip protection - * - * /!\ Warning /!\ When enabling OB_RDP level 2 it's no more possible to go back to level 1 or 0 - * - * @retval None - */ -void FLASH_OB_RDPConfig(uint8_t OB_RDP) -{ - FLASH_Status status = FLASH_COMPLETE; - - /* Check the parameters */ - assert_param(IS_OB_RDP(OB_RDP)); - - status = FLASH_WaitForLastOperation(); - - if(status == FLASH_COMPLETE) - { - *(__IO uint8_t*)OPTCR_BYTE1_ADDRESS = OB_RDP; - - } -} - -/** - * @brief Programs the FLASH User Option Byte: IWDG_SW / RST_STOP / RST_STDBY. - * @param OB_IWDG: Selects the IWDG mode - * This parameter can be one of the following values: - * @arg OB_IWDG_SW: Software IWDG selected - * @arg OB_IWDG_HW: Hardware IWDG selected - * @param OB_STOP: Reset event when entering STOP mode. - * This parameter can be one of the following values: - * @arg OB_STOP_NoRST: No reset generated when entering in STOP - * @arg OB_STOP_RST: Reset generated when entering in STOP - * @param OB_STDBY: Reset event when entering Standby mode. - * This parameter can be one of the following values: - * @arg OB_STDBY_NoRST: No reset generated when entering in STANDBY - * @arg OB_STDBY_RST: Reset generated when entering in STANDBY - * @retval None - */ -void FLASH_OB_UserConfig(uint8_t OB_IWDG, uint8_t OB_STOP, uint8_t OB_STDBY) -{ - uint8_t optiontmp = 0xFF; - FLASH_Status status = FLASH_COMPLETE; - - /* Check the parameters */ - assert_param(IS_OB_IWDG_SOURCE(OB_IWDG)); - assert_param(IS_OB_STOP_SOURCE(OB_STOP)); - assert_param(IS_OB_STDBY_SOURCE(OB_STDBY)); - - /* Wait for last operation to be completed */ - status = FLASH_WaitForLastOperation(); - - if(status == FLASH_COMPLETE) - { -#if defined (STM32F427_437xx) || defined (STM32F429_439xx) - /* Mask OPTLOCK, OPTSTRT, BOR_LEV and BFB2 bits */ - optiontmp = (uint8_t)((*(__IO uint8_t *)OPTCR_BYTE0_ADDRESS) & (uint8_t)0x1F); -#endif /* STM32F427_437xx || STM32F429_439xx */ - -#if defined (STM32F40_41xxx) || defined (STM32F401xx) - /* Mask OPTLOCK, OPTSTRT and BOR_LEV bits */ - optiontmp = (uint8_t)((*(__IO uint8_t *)OPTCR_BYTE0_ADDRESS) & (uint8_t)0x0F); -#endif /* STM32F40_41xxx || STM32F401xx */ - - /* Update User Option Byte */ - *(__IO uint8_t *)OPTCR_BYTE0_ADDRESS = OB_IWDG | (uint8_t)(OB_STDBY | (uint8_t)(OB_STOP | ((uint8_t)optiontmp))); - } -} - -/** - * @brief Configure the Dual Bank Boot. - * - * @note This function can be used only for STM32F42xxx/43xxx devices. - * - * @param OB_BOOT: specifies the Dual Bank Boot Option byte. - * This parameter can be one of the following values: - * @arg OB_Dual_BootEnabled: Dual Bank Boot Enable - * @arg OB_Dual_BootDisabled: Dual Bank Boot Disabled - * @retval None - */ -void FLASH_OB_BootConfig(uint8_t OB_BOOT) -{ - /* Check the parameters */ - assert_param(IS_OB_BOOT(OB_BOOT)); - - /* Set Dual Bank Boot */ - *(__IO uint8_t *)OPTCR_BYTE0_ADDRESS &= (~FLASH_OPTCR_BFB2); - *(__IO uint8_t *)OPTCR_BYTE0_ADDRESS |= OB_BOOT; - -} - -/** - * @brief Sets the BOR Level. - * @param OB_BOR: specifies the Option Bytes BOR Reset Level. - * This parameter can be one of the following values: - * @arg OB_BOR_LEVEL3: Supply voltage ranges from 2.7 to 3.6 V - * @arg OB_BOR_LEVEL2: Supply voltage ranges from 2.4 to 2.7 V - * @arg OB_BOR_LEVEL1: Supply voltage ranges from 2.1 to 2.4 V - * @arg OB_BOR_OFF: Supply voltage ranges from 1.62 to 2.1 V - * @retval None - */ -void FLASH_OB_BORConfig(uint8_t OB_BOR) -{ - /* Check the parameters */ - assert_param(IS_OB_BOR(OB_BOR)); - - /* Set the BOR Level */ - *(__IO uint8_t *)OPTCR_BYTE0_ADDRESS &= (~FLASH_OPTCR_BOR_LEV); - *(__IO uint8_t *)OPTCR_BYTE0_ADDRESS |= OB_BOR; - -} - -/** - * @brief Launch the option byte loading. - * @param None - * @retval FLASH Status: The returned value can be: FLASH_BUSY, FLASH_ERROR_PROGRAM, - * FLASH_ERROR_WRP, FLASH_ERROR_OPERATION or FLASH_COMPLETE. - */ -FLASH_Status FLASH_OB_Launch(void) -{ - FLASH_Status status = FLASH_COMPLETE; - - /* Set the OPTSTRT bit in OPTCR register */ - *(__IO uint8_t *)OPTCR_BYTE0_ADDRESS |= FLASH_OPTCR_OPTSTRT; - - /* Wait for last operation to be completed */ - status = FLASH_WaitForLastOperation(); - - return status; -} - -/** - * @brief Returns the FLASH User Option Bytes values. - * @param None - * @retval The FLASH User Option Bytes values: IWDG_SW(Bit0), RST_STOP(Bit1) - * and RST_STDBY(Bit2). - */ -uint8_t FLASH_OB_GetUser(void) -{ - /* Return the User Option Byte */ - return (uint8_t)(FLASH->OPTCR >> 5); -} - -/** - * @brief Returns the FLASH Write Protection Option Bytes value. - * @param None - * @retval The FLASH Write Protection Option Bytes value - */ -uint16_t FLASH_OB_GetWRP(void) -{ - /* Return the FLASH write protection Register value */ - return (*(__IO uint16_t *)(OPTCR_BYTE2_ADDRESS)); -} - -/** - * @brief Returns the FLASH Write Protection Option Bytes value. - * - * @note This function can be used only for STM32F42xxx/43xxx devices. - * - * @param None - * @retval The FLASH Write Protection Option Bytes value - */ -uint16_t FLASH_OB_GetWRP1(void) -{ - /* Return the FLASH write protection Register value */ - return (*(__IO uint16_t *)(OPTCR1_BYTE2_ADDRESS)); -} - -/** - * @brief Returns the FLASH PC Read/Write Protection Option Bytes value. - * - * @note This function can be used only for STM32F42xxx/43xxx devices and STM32F401xx devices. - * - * @param None - * @retval The FLASH PC Read/Write Protection Option Bytes value - */ -uint16_t FLASH_OB_GetPCROP(void) -{ - /* Return the FLASH PC Read/write protection Register value */ - return (*(__IO uint16_t *)(OPTCR_BYTE2_ADDRESS)); -} - -/** - * @brief Returns the FLASH PC Read/Write Protection Option Bytes value. - * - * @note This function can be used only for STM32F42xxx/43xxx devices. - * - * @param None - * @retval The FLASH PC Read/Write Protection Option Bytes value - */ -uint16_t FLASH_OB_GetPCROP1(void) -{ - /* Return the FLASH write protection Register value */ - return (*(__IO uint16_t *)(OPTCR1_BYTE2_ADDRESS)); -} - -/** - * @brief Returns the FLASH Read Protection level. - * @param None - * @retval FLASH ReadOut Protection Status: - * - SET, when OB_RDP_Level_1 or OB_RDP_Level_2 is set - * - RESET, when OB_RDP_Level_0 is set - */ -FlagStatus FLASH_OB_GetRDP(void) -{ - FlagStatus readstatus = RESET; - - if ((*(__IO uint8_t*)(OPTCR_BYTE1_ADDRESS) != (uint8_t)OB_RDP_Level_0)) - { - readstatus = SET; - } - else - { - readstatus = RESET; - } - return readstatus; -} - -/** - * @brief Returns the FLASH BOR level. - * @param None - * @retval The FLASH BOR level: - * - OB_BOR_LEVEL3: Supply voltage ranges from 2.7 to 3.6 V - * - OB_BOR_LEVEL2: Supply voltage ranges from 2.4 to 2.7 V - * - OB_BOR_LEVEL1: Supply voltage ranges from 2.1 to 2.4 V - * - OB_BOR_OFF : Supply voltage ranges from 1.62 to 2.1 V - */ -uint8_t FLASH_OB_GetBOR(void) -{ - /* Return the FLASH BOR level */ - return (uint8_t)(*(__IO uint8_t *)(OPTCR_BYTE0_ADDRESS) & (uint8_t)0x0C); -} - -/** - * @} - */ - -/** @defgroup FLASH_Group4 Interrupts and flags management functions - * @brief Interrupts and flags management functions - * -@verbatim - =============================================================================== - ##### Interrupts and flags management functions ##### - =============================================================================== -@endverbatim - * @{ - */ - -/** - * @brief Enables or disables the specified FLASH interrupts. - * @param FLASH_IT: specifies the FLASH interrupt sources to be enabled or disabled. - * This parameter can be any combination of the following values: - * @arg FLASH_IT_ERR: FLASH Error Interrupt - * @arg FLASH_IT_EOP: FLASH end of operation Interrupt - * @retval None - */ -void FLASH_ITConfig(uint32_t FLASH_IT, FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_FLASH_IT(FLASH_IT)); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - - if(NewState != DISABLE) - { - /* Enable the interrupt sources */ - FLASH->CR |= FLASH_IT; - } - else - { - /* Disable the interrupt sources */ - FLASH->CR &= ~(uint32_t)FLASH_IT; - } -} - -/** - * @brief Checks whether the specified FLASH flag is set or not. - * @param FLASH_FLAG: specifies the FLASH flag to check. - * This parameter can be one of the following values: - * @arg FLASH_FLAG_EOP: FLASH End of Operation flag - * @arg FLASH_FLAG_OPERR: FLASH operation Error flag - * @arg FLASH_FLAG_WRPERR: FLASH Write protected error flag - * @arg FLASH_FLAG_PGAERR: FLASH Programming Alignment error flag - * @arg FLASH_FLAG_PGPERR: FLASH Programming Parallelism error flag - * @arg FLASH_FLAG_PGSERR: FLASH Programming Sequence error flag - * @arg FLASH_FLAG_RDERR: FLASH (PCROP) Read Protection error flag (STM32F42/43xxx and STM32F401xx devices) - * @arg FLASH_FLAG_BSY: FLASH Busy flag - * @retval The new state of FLASH_FLAG (SET or RESET). - */ -FlagStatus FLASH_GetFlagStatus(uint32_t FLASH_FLAG) -{ - FlagStatus bitstatus = RESET; - /* Check the parameters */ - assert_param(IS_FLASH_GET_FLAG(FLASH_FLAG)); - - if((FLASH->SR & FLASH_FLAG) != (uint32_t)RESET) - { - bitstatus = SET; - } - else - { - bitstatus = RESET; - } - /* Return the new state of FLASH_FLAG (SET or RESET) */ - return bitstatus; -} - -/** - * @brief Clears the FLASH's pending flags. - * @param FLASH_FLAG: specifies the FLASH flags to clear. - * This parameter can be any combination of the following values: - * @arg FLASH_FLAG_EOP: FLASH End of Operation flag - * @arg FLASH_FLAG_OPERR: FLASH operation Error flag - * @arg FLASH_FLAG_WRPERR: FLASH Write protected error flag - * @arg FLASH_FLAG_PGAERR: FLASH Programming Alignment error flag - * @arg FLASH_FLAG_PGPERR: FLASH Programming Parallelism error flag - * @arg FLASH_FLAG_PGSERR: FLASH Programming Sequence error flag - * @arg FLASH_FLAG_RDERR: FLASH Read Protection error flag (STM32F42/43xxx and STM32F401xx devices) - * @retval None - */ -void FLASH_ClearFlag(uint32_t FLASH_FLAG) -{ - /* Check the parameters */ - assert_param(IS_FLASH_CLEAR_FLAG(FLASH_FLAG)); - - /* Clear the flags */ - FLASH->SR = FLASH_FLAG; -} - -/** - * @brief Returns the FLASH Status. - * @param None - * @retval FLASH Status: The returned value can be: FLASH_BUSY, FLASH_ERROR_PROGRAM, - * FLASH_ERROR_WRP, FLASH_ERROR_RD, FLASH_ERROR_OPERATION or FLASH_COMPLETE. - */ -FLASH_Status FLASH_GetStatus(void) -{ - FLASH_Status flashstatus = FLASH_COMPLETE; - - if((FLASH->SR & FLASH_FLAG_BSY) == FLASH_FLAG_BSY) - { - flashstatus = FLASH_BUSY; - } - else - { - if((FLASH->SR & FLASH_FLAG_WRPERR) != (uint32_t)0x00) - { - flashstatus = FLASH_ERROR_WRP; - } - else - { - if((FLASH->SR & FLASH_FLAG_RDERR) != (uint32_t)0x00) - { - flashstatus = FLASH_ERROR_RD; - } - else - { - if((FLASH->SR & (uint32_t)0xEF) != (uint32_t)0x00) - { - flashstatus = FLASH_ERROR_PROGRAM; - } - else - { - if((FLASH->SR & FLASH_FLAG_OPERR) != (uint32_t)0x00) - { - flashstatus = FLASH_ERROR_OPERATION; - } - else - { - flashstatus = FLASH_COMPLETE; - } - } - } - } - } - /* Return the FLASH Status */ - return flashstatus; -} - -/** - * @brief Waits for a FLASH operation to complete. - * @param None - * @retval FLASH Status: The returned value can be: FLASH_BUSY, FLASH_ERROR_PROGRAM, - * FLASH_ERROR_WRP, FLASH_ERROR_OPERATION or FLASH_COMPLETE. - */ -FLASH_Status FLASH_WaitForLastOperation(void) -{ - __IO FLASH_Status status = FLASH_COMPLETE; - - /* Check for the FLASH Status */ - status = FLASH_GetStatus(); - - /* Wait for the FLASH operation to complete by polling on BUSY flag to be reset. - Even if the FLASH operation fails, the BUSY flag will be reset and an error - flag will be set */ - while(status == FLASH_BUSY) - { - status = FLASH_GetStatus(); - } - /* Return the operation status */ - return status; -} - -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/stm/lib/stm32f4xx_flash.h b/stm/lib/stm32f4xx_flash.h deleted file mode 100644 index ee3e9a9fe..000000000 --- a/stm/lib/stm32f4xx_flash.h +++ /dev/null @@ -1,482 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f4xx_flash.h - * @author MCD Application Team - * @version V1.3.0 - * @date 08-November-2013 - * @brief This file contains all the functions prototypes for the FLASH - * firmware library. - ****************************************************************************** - * @attention - * - *

© COPYRIGHT 2013 STMicroelectronics

- * - * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License"); - * You may not use this file except in compliance with the License. - * You may obtain a copy of the License at: - * - * http://www.st.com/software_license_agreement_liberty_v2 - * - * Unless required by applicable law or agreed to in writing, software - * distributed under the License is distributed on an "AS IS" BASIS, - * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - * See the License for the specific language governing permissions and - * limitations under the License. - * - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F4xx_FLASH_H -#define __STM32F4xx_FLASH_H - -#ifdef __cplusplus - extern "C" { -#endif - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx.h" - -/** @addtogroup STM32F4xx_StdPeriph_Driver - * @{ - */ - -/** @addtogroup FLASH - * @{ - */ - -/* Exported types ------------------------------------------------------------*/ -/** - * @brief FLASH Status - */ -typedef enum -{ - FLASH_BUSY = 1, - FLASH_ERROR_RD, - FLASH_ERROR_PGS, - FLASH_ERROR_PGP, - FLASH_ERROR_PGA, - FLASH_ERROR_WRP, - FLASH_ERROR_PROGRAM, - FLASH_ERROR_OPERATION, - FLASH_COMPLETE -}FLASH_Status; - -/* Exported constants --------------------------------------------------------*/ - -/** @defgroup FLASH_Exported_Constants - * @{ - */ - -/** @defgroup Flash_Latency - * @{ - */ -#define FLASH_Latency_0 ((uint8_t)0x0000) /*!< FLASH Zero Latency cycle */ -#define FLASH_Latency_1 ((uint8_t)0x0001) /*!< FLASH One Latency cycle */ -#define FLASH_Latency_2 ((uint8_t)0x0002) /*!< FLASH Two Latency cycles */ -#define FLASH_Latency_3 ((uint8_t)0x0003) /*!< FLASH Three Latency cycles */ -#define FLASH_Latency_4 ((uint8_t)0x0004) /*!< FLASH Four Latency cycles */ -#define FLASH_Latency_5 ((uint8_t)0x0005) /*!< FLASH Five Latency cycles */ -#define FLASH_Latency_6 ((uint8_t)0x0006) /*!< FLASH Six Latency cycles */ -#define FLASH_Latency_7 ((uint8_t)0x0007) /*!< FLASH Seven Latency cycles */ -#define FLASH_Latency_8 ((uint8_t)0x0008) /*!< FLASH Eight Latency cycles */ -#define FLASH_Latency_9 ((uint8_t)0x0009) /*!< FLASH Nine Latency cycles */ -#define FLASH_Latency_10 ((uint8_t)0x000A) /*!< FLASH Ten Latency cycles */ -#define FLASH_Latency_11 ((uint8_t)0x000B) /*!< FLASH Eleven Latency cycles */ -#define FLASH_Latency_12 ((uint8_t)0x000C) /*!< FLASH Twelve Latency cycles */ -#define FLASH_Latency_13 ((uint8_t)0x000D) /*!< FLASH Thirteen Latency cycles */ -#define FLASH_Latency_14 ((uint8_t)0x000E) /*!< FLASH Fourteen Latency cycles */ -#define FLASH_Latency_15 ((uint8_t)0x000F) /*!< FLASH Fifteen Latency cycles */ - - -#define IS_FLASH_LATENCY(LATENCY) (((LATENCY) == FLASH_Latency_0) || \ - ((LATENCY) == FLASH_Latency_1) || \ - ((LATENCY) == FLASH_Latency_2) || \ - ((LATENCY) == FLASH_Latency_3) || \ - ((LATENCY) == FLASH_Latency_4) || \ - ((LATENCY) == FLASH_Latency_5) || \ - ((LATENCY) == FLASH_Latency_6) || \ - ((LATENCY) == FLASH_Latency_7) || \ - ((LATENCY) == FLASH_Latency_8) || \ - ((LATENCY) == FLASH_Latency_9) || \ - ((LATENCY) == FLASH_Latency_10) || \ - ((LATENCY) == FLASH_Latency_11) || \ - ((LATENCY) == FLASH_Latency_12) || \ - ((LATENCY) == FLASH_Latency_13) || \ - ((LATENCY) == FLASH_Latency_14) || \ - ((LATENCY) == FLASH_Latency_15)) -/** - * @} - */ - -/** @defgroup FLASH_Voltage_Range - * @{ - */ -#define VoltageRange_1 ((uint8_t)0x00) /*!< Device operating range: 1.8V to 2.1V */ -#define VoltageRange_2 ((uint8_t)0x01) /*!= 0x08000000) && ((ADDRESS) < 0x081FFFFF)) ||\ - (((ADDRESS) >= 0x1FFF7800) && ((ADDRESS) < 0x1FFF7A0F))) -#endif /* STM32F427_437xx || STM32F429_439xx */ - -#if defined (STM32F40_41xxx) -#define IS_FLASH_ADDRESS(ADDRESS) ((((ADDRESS) >= 0x08000000) && ((ADDRESS) < 0x080FFFFF)) ||\ - (((ADDRESS) >= 0x1FFF7800) && ((ADDRESS) < 0x1FFF7A0F))) -#endif /* STM32F40_41xxx */ - -#if defined (STM32F401xx) -#define IS_FLASH_ADDRESS(ADDRESS) ((((ADDRESS) >= 0x08000000) && ((ADDRESS) < 0x0803FFFF)) ||\ - (((ADDRESS) >= 0x1FFF7800) && ((ADDRESS) < 0x1FFF7A0F))) -#endif /* STM32F401xx */ -/** - * @} - */ - -/** @defgroup Option_Bytes_Write_Protection - * @{ - */ -#define OB_WRP_Sector_0 ((uint32_t)0x00000001) /*!< Write protection of Sector0 */ -#define OB_WRP_Sector_1 ((uint32_t)0x00000002) /*!< Write protection of Sector1 */ -#define OB_WRP_Sector_2 ((uint32_t)0x00000004) /*!< Write protection of Sector2 */ -#define OB_WRP_Sector_3 ((uint32_t)0x00000008) /*!< Write protection of Sector3 */ -#define OB_WRP_Sector_4 ((uint32_t)0x00000010) /*!< Write protection of Sector4 */ -#define OB_WRP_Sector_5 ((uint32_t)0x00000020) /*!< Write protection of Sector5 */ -#define OB_WRP_Sector_6 ((uint32_t)0x00000040) /*!< Write protection of Sector6 */ -#define OB_WRP_Sector_7 ((uint32_t)0x00000080) /*!< Write protection of Sector7 */ -#define OB_WRP_Sector_8 ((uint32_t)0x00000100) /*!< Write protection of Sector8 */ -#define OB_WRP_Sector_9 ((uint32_t)0x00000200) /*!< Write protection of Sector9 */ -#define OB_WRP_Sector_10 ((uint32_t)0x00000400) /*!< Write protection of Sector10 */ -#define OB_WRP_Sector_11 ((uint32_t)0x00000800) /*!< Write protection of Sector11 */ -#define OB_WRP_Sector_12 ((uint32_t)0x00000001) /*!< Write protection of Sector12 */ -#define OB_WRP_Sector_13 ((uint32_t)0x00000002) /*!< Write protection of Sector13 */ -#define OB_WRP_Sector_14 ((uint32_t)0x00000004) /*!< Write protection of Sector14 */ -#define OB_WRP_Sector_15 ((uint32_t)0x00000008) /*!< Write protection of Sector15 */ -#define OB_WRP_Sector_16 ((uint32_t)0x00000010) /*!< Write protection of Sector16 */ -#define OB_WRP_Sector_17 ((uint32_t)0x00000020) /*!< Write protection of Sector17 */ -#define OB_WRP_Sector_18 ((uint32_t)0x00000040) /*!< Write protection of Sector18 */ -#define OB_WRP_Sector_19 ((uint32_t)0x00000080) /*!< Write protection of Sector19 */ -#define OB_WRP_Sector_20 ((uint32_t)0x00000100) /*!< Write protection of Sector20 */ -#define OB_WRP_Sector_21 ((uint32_t)0x00000200) /*!< Write protection of Sector21 */ -#define OB_WRP_Sector_22 ((uint32_t)0x00000400) /*!< Write protection of Sector22 */ -#define OB_WRP_Sector_23 ((uint32_t)0x00000800) /*!< Write protection of Sector23 */ -#define OB_WRP_Sector_All ((uint32_t)0x00000FFF) /*!< Write protection of all Sectors */ - -#define IS_OB_WRP(SECTOR)((((SECTOR) & (uint32_t)0xFFFFF000) == 0x00000000) && ((SECTOR) != 0x00000000)) -/** - * @} - */ - -/** @defgroup Selection_Protection_Mode - * @{ - */ -#define OB_PcROP_Disable ((uint8_t)0x00) /*!< Disabled PcROP, nWPRi bits used for Write Protection on sector i */ -#define OB_PcROP_Enable ((uint8_t)0x80) /*!< Enable PcROP, nWPRi bits used for PCRoP Protection on sector i */ -#define IS_OB_PCROP_SELECT(PCROP) (((PCROP) == OB_PcROP_Disable) || ((PCROP) == OB_PcROP_Enable)) -/** - * @} - */ - -/** @defgroup Option_Bytes_PC_ReadWrite_Protection - * @{ - */ -#define OB_PCROP_Sector_0 ((uint32_t)0x00000001) /*!< PC Read/Write protection of Sector0 */ -#define OB_PCROP_Sector_1 ((uint32_t)0x00000002) /*!< PC Read/Write protection of Sector1 */ -#define OB_PCROP_Sector_2 ((uint32_t)0x00000004) /*!< PC Read/Write protection of Sector2 */ -#define OB_PCROP_Sector_3 ((uint32_t)0x00000008) /*!< PC Read/Write protection of Sector3 */ -#define OB_PCROP_Sector_4 ((uint32_t)0x00000010) /*!< PC Read/Write protection of Sector4 */ -#define OB_PCROP_Sector_5 ((uint32_t)0x00000020) /*!< PC Read/Write protection of Sector5 */ -#define OB_PCROP_Sector_6 ((uint32_t)0x00000040) /*!< PC Read/Write protection of Sector6 */ -#define OB_PCROP_Sector_7 ((uint32_t)0x00000080) /*!< PC Read/Write protection of Sector7 */ -#define OB_PCROP_Sector_8 ((uint32_t)0x00000100) /*!< PC Read/Write protection of Sector8 */ -#define OB_PCROP_Sector_9 ((uint32_t)0x00000200) /*!< PC Read/Write protection of Sector9 */ -#define OB_PCROP_Sector_10 ((uint32_t)0x00000400) /*!< PC Read/Write protection of Sector10 */ -#define OB_PCROP_Sector_11 ((uint32_t)0x00000800) /*!< PC Read/Write protection of Sector11 */ -#define OB_PCROP_Sector_12 ((uint32_t)0x00000001) /*!< PC Read/Write protection of Sector12 */ -#define OB_PCROP_Sector_13 ((uint32_t)0x00000002) /*!< PC Read/Write protection of Sector13 */ -#define OB_PCROP_Sector_14 ((uint32_t)0x00000004) /*!< PC Read/Write protection of Sector14 */ -#define OB_PCROP_Sector_15 ((uint32_t)0x00000008) /*!< PC Read/Write protection of Sector15 */ -#define OB_PCROP_Sector_16 ((uint32_t)0x00000010) /*!< PC Read/Write protection of Sector16 */ -#define OB_PCROP_Sector_17 ((uint32_t)0x00000020) /*!< PC Read/Write protection of Sector17 */ -#define OB_PCROP_Sector_18 ((uint32_t)0x00000040) /*!< PC Read/Write protection of Sector18 */ -#define OB_PCROP_Sector_19 ((uint32_t)0x00000080) /*!< PC Read/Write protection of Sector19 */ -#define OB_PCROP_Sector_20 ((uint32_t)0x00000100) /*!< PC Read/Write protection of Sector20 */ -#define OB_PCROP_Sector_21 ((uint32_t)0x00000200) /*!< PC Read/Write protection of Sector21 */ -#define OB_PCROP_Sector_22 ((uint32_t)0x00000400) /*!< PC Read/Write protection of Sector22 */ -#define OB_PCROP_Sector_23 ((uint32_t)0x00000800) /*!< PC Read/Write protection of Sector23 */ -#define OB_PCROP_Sector_All ((uint32_t)0x00000FFF) /*!< PC Read/Write protection of all Sectors */ - -#define IS_OB_PCROP(SECTOR)((((SECTOR) & (uint32_t)0xFFFFF000) == 0x00000000) && ((SECTOR) != 0x00000000)) -/** - * @} - */ - -/** @defgroup FLASH_Option_Bytes_Read_Protection - * @{ - */ -#define OB_RDP_Level_0 ((uint8_t)0xAA) -#define OB_RDP_Level_1 ((uint8_t)0x55) -/*#define OB_RDP_Level_2 ((uint8_t)0xCC)*/ /*!< Warning: When enabling read protection level 2 - it's no more possible to go back to level 1 or 0 */ -#define IS_OB_RDP(LEVEL) (((LEVEL) == OB_RDP_Level_0)||\ - ((LEVEL) == OB_RDP_Level_1))/*||\ - ((LEVEL) == OB_RDP_Level_2))*/ -/** - * @} - */ - -/** @defgroup FLASH_Option_Bytes_IWatchdog - * @{ - */ -#define OB_IWDG_SW ((uint8_t)0x20) /*!< Software IWDG selected */ -#define OB_IWDG_HW ((uint8_t)0x00) /*!< Hardware IWDG selected */ -#define IS_OB_IWDG_SOURCE(SOURCE) (((SOURCE) == OB_IWDG_SW) || ((SOURCE) == OB_IWDG_HW)) -/** - * @} - */ - -/** @defgroup FLASH_Option_Bytes_nRST_STOP - * @{ - */ -#define OB_STOP_NoRST ((uint8_t)0x40) /*!< No reset generated when entering in STOP */ -#define OB_STOP_RST ((uint8_t)0x00) /*!< Reset generated when entering in STOP */ -#define IS_OB_STOP_SOURCE(SOURCE) (((SOURCE) == OB_STOP_NoRST) || ((SOURCE) == OB_STOP_RST)) -/** - * @} - */ - - -/** @defgroup FLASH_Option_Bytes_nRST_STDBY - * @{ - */ -#define OB_STDBY_NoRST ((uint8_t)0x80) /*!< No reset generated when entering in STANDBY */ -#define OB_STDBY_RST ((uint8_t)0x00) /*!< Reset generated when entering in STANDBY */ -#define IS_OB_STDBY_SOURCE(SOURCE) (((SOURCE) == OB_STDBY_NoRST) || ((SOURCE) == OB_STDBY_RST)) -/** - * @} - */ - -/** @defgroup FLASH_BOR_Reset_Level - * @{ - */ -#define OB_BOR_LEVEL3 ((uint8_t)0x00) /*!< Supply voltage ranges from 2.70 to 3.60 V */ -#define OB_BOR_LEVEL2 ((uint8_t)0x04) /*!< Supply voltage ranges from 2.40 to 2.70 V */ -#define OB_BOR_LEVEL1 ((uint8_t)0x08) /*!< Supply voltage ranges from 2.10 to 2.40 V */ -#define OB_BOR_OFF ((uint8_t)0x0C) /*!< Supply voltage ranges from 1.62 to 2.10 V */ -#define IS_OB_BOR(LEVEL) (((LEVEL) == OB_BOR_LEVEL1) || ((LEVEL) == OB_BOR_LEVEL2) ||\ - ((LEVEL) == OB_BOR_LEVEL3) || ((LEVEL) == OB_BOR_OFF)) -/** - * @} - */ - -/** @defgroup FLASH_Dual_Boot - * @{ - */ -#define OB_Dual_BootEnabled ((uint8_t)0x10) /*!< Dual Bank Boot Enable */ -#define OB_Dual_BootDisabled ((uint8_t)0x00) /*!< Dual Bank Boot Disable, always boot on User Flash */ -#define IS_OB_BOOT(BOOT) (((BOOT) == OB_Dual_BootEnabled) || ((BOOT) == OB_Dual_BootDisabled)) -/** - * @} - */ - -/** @defgroup FLASH_Interrupts - * @{ - */ -#define FLASH_IT_EOP ((uint32_t)0x01000000) /*!< End of FLASH Operation Interrupt source */ -#define FLASH_IT_ERR ((uint32_t)0x02000000) /*!< Error Interrupt source */ -#define IS_FLASH_IT(IT) ((((IT) & (uint32_t)0xFCFFFFFF) == 0x00000000) && ((IT) != 0x00000000)) -/** - * @} - */ - -/** @defgroup FLASH_Flags - * @{ - */ -#define FLASH_FLAG_EOP ((uint32_t)0x00000001) /*!< FLASH End of Operation flag */ -#define FLASH_FLAG_OPERR ((uint32_t)0x00000002) /*!< FLASH operation Error flag */ -#define FLASH_FLAG_WRPERR ((uint32_t)0x00000010) /*!< FLASH Write protected error flag */ -#define FLASH_FLAG_PGAERR ((uint32_t)0x00000020) /*!< FLASH Programming Alignment error flag */ -#define FLASH_FLAG_PGPERR ((uint32_t)0x00000040) /*!< FLASH Programming Parallelism error flag */ -#define FLASH_FLAG_PGSERR ((uint32_t)0x00000080) /*!< FLASH Programming Sequence error flag */ -#define FLASH_FLAG_RDERR ((uint32_t)0x00000100) /*!< Read Protection error flag (PCROP) */ -#define FLASH_FLAG_BSY ((uint32_t)0x00010000) /*!< FLASH Busy flag */ -#define IS_FLASH_CLEAR_FLAG(FLAG) ((((FLAG) & (uint32_t)0xFFFFFE0C) == 0x00000000) && ((FLAG) != 0x00000000)) -#define IS_FLASH_GET_FLAG(FLAG) (((FLAG) == FLASH_FLAG_EOP) || ((FLAG) == FLASH_FLAG_OPERR) || \ - ((FLAG) == FLASH_FLAG_WRPERR) || ((FLAG) == FLASH_FLAG_PGAERR) || \ - ((FLAG) == FLASH_FLAG_PGPERR) || ((FLAG) == FLASH_FLAG_PGSERR) || \ - ((FLAG) == FLASH_FLAG_BSY) || ((FLAG) == FLASH_FLAG_RDERR)) -/** - * @} - */ - -/** @defgroup FLASH_Program_Parallelism - * @{ - */ -#define FLASH_PSIZE_BYTE ((uint32_t)0x00000000) -#define FLASH_PSIZE_HALF_WORD ((uint32_t)0x00000100) -#define FLASH_PSIZE_WORD ((uint32_t)0x00000200) -#define FLASH_PSIZE_DOUBLE_WORD ((uint32_t)0x00000300) -#define CR_PSIZE_MASK ((uint32_t)0xFFFFFCFF) -/** - * @} - */ - -/** @defgroup FLASH_Keys - * @{ - */ -#define RDP_KEY ((uint16_t)0x00A5) -#define FLASH_KEY1 ((uint32_t)0x45670123) -#define FLASH_KEY2 ((uint32_t)0xCDEF89AB) -#define FLASH_OPT_KEY1 ((uint32_t)0x08192A3B) -#define FLASH_OPT_KEY2 ((uint32_t)0x4C5D6E7F) -/** - * @} - */ - -/** - * @brief ACR register byte 0 (Bits[7:0]) base address - */ -#define ACR_BYTE0_ADDRESS ((uint32_t)0x40023C00) -/** - * @brief OPTCR register byte 0 (Bits[7:0]) base address - */ -#define OPTCR_BYTE0_ADDRESS ((uint32_t)0x40023C14) -/** - * @brief OPTCR register byte 1 (Bits[15:8]) base address - */ -#define OPTCR_BYTE1_ADDRESS ((uint32_t)0x40023C15) -/** - * @brief OPTCR register byte 2 (Bits[23:16]) base address - */ -#define OPTCR_BYTE2_ADDRESS ((uint32_t)0x40023C16) -/** - * @brief OPTCR register byte 3 (Bits[31:24]) base address - */ -#define OPTCR_BYTE3_ADDRESS ((uint32_t)0x40023C17) - -/** - * @brief OPTCR1 register byte 0 (Bits[7:0]) base address - */ -#define OPTCR1_BYTE2_ADDRESS ((uint32_t)0x40023C1A) - -/** - * @} - */ - -/* Exported macro ------------------------------------------------------------*/ -/* Exported functions --------------------------------------------------------*/ - -/* FLASH Interface configuration functions ************************************/ -void FLASH_SetLatency(uint32_t FLASH_Latency); -void FLASH_PrefetchBufferCmd(FunctionalState NewState); -void FLASH_InstructionCacheCmd(FunctionalState NewState); -void FLASH_DataCacheCmd(FunctionalState NewState); -void FLASH_InstructionCacheReset(void); -void FLASH_DataCacheReset(void); - -/* FLASH Memory Programming functions *****************************************/ -void FLASH_Unlock(void); -void FLASH_Lock(void); -FLASH_Status FLASH_EraseSector(uint32_t FLASH_Sector, uint8_t VoltageRange); -FLASH_Status FLASH_EraseAllSectors(uint8_t VoltageRange); -FLASH_Status FLASH_EraseAllBank1Sectors(uint8_t VoltageRange); -FLASH_Status FLASH_EraseAllBank2Sectors(uint8_t VoltageRange); -FLASH_Status FLASH_ProgramDoubleWord(uint32_t Address, uint64_t Data); -FLASH_Status FLASH_ProgramWord(uint32_t Address, uint32_t Data); -FLASH_Status FLASH_ProgramHalfWord(uint32_t Address, uint16_t Data); -FLASH_Status FLASH_ProgramByte(uint32_t Address, uint8_t Data); - -/* Option Bytes Programming functions *****************************************/ -void FLASH_OB_Unlock(void); -void FLASH_OB_Lock(void); -void FLASH_OB_WRPConfig(uint32_t OB_WRP, FunctionalState NewState); -void FLASH_OB_WRP1Config(uint32_t OB_WRP, FunctionalState NewState); -void FLASH_OB_PCROPSelectionConfig(uint8_t OB_PcROP); -void FLASH_OB_PCROPConfig(uint32_t OB_PCROP, FunctionalState NewState); -void FLASH_OB_PCROP1Config(uint32_t OB_PCROP, FunctionalState NewState); -void FLASH_OB_RDPConfig(uint8_t OB_RDP); -void FLASH_OB_UserConfig(uint8_t OB_IWDG, uint8_t OB_STOP, uint8_t OB_STDBY); -void FLASH_OB_BORConfig(uint8_t OB_BOR); -void FLASH_OB_BootConfig(uint8_t OB_BOOT); -FLASH_Status FLASH_OB_Launch(void); -uint8_t FLASH_OB_GetUser(void); -uint16_t FLASH_OB_GetWRP(void); -uint16_t FLASH_OB_GetWRP1(void); -uint16_t FLASH_OB_GetPCROP(void); -uint16_t FLASH_OB_GetPCROP1(void); -FlagStatus FLASH_OB_GetRDP(void); -uint8_t FLASH_OB_GetBOR(void); - -/* Interrupts and flags management functions **********************************/ -void FLASH_ITConfig(uint32_t FLASH_IT, FunctionalState NewState); -FlagStatus FLASH_GetFlagStatus(uint32_t FLASH_FLAG); -void FLASH_ClearFlag(uint32_t FLASH_FLAG); -FLASH_Status FLASH_GetStatus(void); -FLASH_Status FLASH_WaitForLastOperation(void); - -#ifdef __cplusplus -} -#endif - -#endif /* __STM32F4xx_FLASH_H */ - -/** - * @} - */ - -/** - * @} - */ - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/stm/lib/stm32f4xx_gpio.c b/stm/lib/stm32f4xx_gpio.c deleted file mode 100644 index c099e948e..000000000 --- a/stm/lib/stm32f4xx_gpio.c +++ /dev/null @@ -1,611 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f4xx_gpio.c - * @author MCD Application Team - * @version V1.3.0 - * @date 08-November-2013 - * @brief This file provides firmware functions to manage the following - * functionalities of the GPIO peripheral: - * + Initialization and Configuration - * + GPIO Read and Write - * + GPIO Alternate functions configuration - * -@verbatim - =============================================================================== - ##### How to use this driver ##### - =============================================================================== - [..] - (#) Enable the GPIO AHB clock using the following function - RCC_AHB1PeriphClockCmd(RCC_AHB1Periph_GPIOx, ENABLE); - - (#) Configure the GPIO pin(s) using GPIO_Init() - Four possible configuration are available for each pin: - (++) Input: Floating, Pull-up, Pull-down. - (++) Output: Push-Pull (Pull-up, Pull-down or no Pull) - Open Drain (Pull-up, Pull-down or no Pull). In output mode, the speed - is configurable: 2 MHz, 25 MHz, 50 MHz or 100 MHz. - (++) Alternate Function: Push-Pull (Pull-up, Pull-down or no Pull) Open - Drain (Pull-up, Pull-down or no Pull). - (++) Analog: required mode when a pin is to be used as ADC channel or DAC - output. - - (#) Peripherals alternate function: - (++) For ADC and DAC, configure the desired pin in analog mode using - GPIO_InitStruct->GPIO_Mode = GPIO_Mode_AN; - (+++) For other peripherals (TIM, USART...): - (+++) Connect the pin to the desired peripherals' Alternate - Function (AF) using GPIO_PinAFConfig() function - (+++) Configure the desired pin in alternate function mode using - GPIO_InitStruct->GPIO_Mode = GPIO_Mode_AF - (+++) Select the type, pull-up/pull-down and output speed via - GPIO_PuPd, GPIO_OType and GPIO_Speed members - (+++) Call GPIO_Init() function - - (#) To get the level of a pin configured in input mode use GPIO_ReadInputDataBit() - - (#) To set/reset the level of a pin configured in output mode use - GPIO_SetBits()/GPIO_ResetBits() - - (#) During and just after reset, the alternate functions are not - active and the GPIO pins are configured in input floating mode (except JTAG - pins). - - (#) The LSE oscillator pins OSC32_IN and OSC32_OUT can be used as general purpose - (PC14 and PC15, respectively) when the LSE oscillator is off. The LSE has - priority over the GPIO function. - - (#) The HSE oscillator pins OSC_IN/OSC_OUT can be used as - general purpose PH0 and PH1, respectively, when the HSE oscillator is off. - The HSE has priority over the GPIO function. - -@endverbatim - * - ****************************************************************************** - * @attention - * - *

© COPYRIGHT 2013 STMicroelectronics

- * - * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License"); - * You may not use this file except in compliance with the License. - * You may obtain a copy of the License at: - * - * http://www.st.com/software_license_agreement_liberty_v2 - * - * Unless required by applicable law or agreed to in writing, software - * distributed under the License is distributed on an "AS IS" BASIS, - * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - * See the License for the specific language governing permissions and - * limitations under the License. - * - ****************************************************************************** - */ - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx_gpio.h" -#include "stm32f4xx_rcc.h" - -/** @addtogroup STM32F4xx_StdPeriph_Driver - * @{ - */ - -/** @defgroup GPIO - * @brief GPIO driver modules - * @{ - */ - -/* Private typedef -----------------------------------------------------------*/ -/* Private define ------------------------------------------------------------*/ -/* Private macro -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -/* Private function prototypes -----------------------------------------------*/ -/* Private functions ---------------------------------------------------------*/ - -/** @defgroup GPIO_Private_Functions - * @{ - */ - -/** @defgroup GPIO_Group1 Initialization and Configuration - * @brief Initialization and Configuration - * -@verbatim - =============================================================================== - ##### Initialization and Configuration ##### - =============================================================================== - -@endverbatim - * @{ - */ - -/** - * @brief De-initializes the GPIOx peripheral registers to their default reset values. - * @note By default, The GPIO pins are configured in input floating mode (except JTAG pins). - * @param GPIOx: where x can be (A..K) to select the GPIO peripheral for STM32F405xx/407xx and STM32F415xx/417xx devices - * x can be (A..I) to select the GPIO peripheral for STM32F42xxx/43xxx devices. - * x can be (A, B, C, D and H) to select the GPIO peripheral for STM32F401xx devices. - * @retval None - */ -void GPIO_DeInit(GPIO_TypeDef* GPIOx) -{ - /* Check the parameters */ - assert_param(IS_GPIO_ALL_PERIPH(GPIOx)); - - if (GPIOx == GPIOA) - { - RCC_AHB1PeriphResetCmd(RCC_AHB1Periph_GPIOA, ENABLE); - RCC_AHB1PeriphResetCmd(RCC_AHB1Periph_GPIOA, DISABLE); - } - else if (GPIOx == GPIOB) - { - RCC_AHB1PeriphResetCmd(RCC_AHB1Periph_GPIOB, ENABLE); - RCC_AHB1PeriphResetCmd(RCC_AHB1Periph_GPIOB, DISABLE); - } - else if (GPIOx == GPIOC) - { - RCC_AHB1PeriphResetCmd(RCC_AHB1Periph_GPIOC, ENABLE); - RCC_AHB1PeriphResetCmd(RCC_AHB1Periph_GPIOC, DISABLE); - } - else if (GPIOx == GPIOD) - { - RCC_AHB1PeriphResetCmd(RCC_AHB1Periph_GPIOD, ENABLE); - RCC_AHB1PeriphResetCmd(RCC_AHB1Periph_GPIOD, DISABLE); - } - else if (GPIOx == GPIOE) - { - RCC_AHB1PeriphResetCmd(RCC_AHB1Periph_GPIOE, ENABLE); - RCC_AHB1PeriphResetCmd(RCC_AHB1Periph_GPIOE, DISABLE); - } - else if (GPIOx == GPIOF) - { - RCC_AHB1PeriphResetCmd(RCC_AHB1Periph_GPIOF, ENABLE); - RCC_AHB1PeriphResetCmd(RCC_AHB1Periph_GPIOF, DISABLE); - } - else if (GPIOx == GPIOG) - { - RCC_AHB1PeriphResetCmd(RCC_AHB1Periph_GPIOG, ENABLE); - RCC_AHB1PeriphResetCmd(RCC_AHB1Periph_GPIOG, DISABLE); - } - else if (GPIOx == GPIOH) - { - RCC_AHB1PeriphResetCmd(RCC_AHB1Periph_GPIOH, ENABLE); - RCC_AHB1PeriphResetCmd(RCC_AHB1Periph_GPIOH, DISABLE); - } - - else if (GPIOx == GPIOI) - { - RCC_AHB1PeriphResetCmd(RCC_AHB1Periph_GPIOI, ENABLE); - RCC_AHB1PeriphResetCmd(RCC_AHB1Periph_GPIOI, DISABLE); - } - else if (GPIOx == GPIOJ) - { - RCC_AHB1PeriphResetCmd(RCC_AHB1Periph_GPIOJ, ENABLE); - RCC_AHB1PeriphResetCmd(RCC_AHB1Periph_GPIOJ, DISABLE); - } - else - { - if (GPIOx == GPIOK) - { - RCC_AHB1PeriphResetCmd(RCC_AHB1Periph_GPIOK, ENABLE); - RCC_AHB1PeriphResetCmd(RCC_AHB1Periph_GPIOK, DISABLE); - } - } -} - -/** - * @brief Initializes the GPIOx peripheral according to the specified parameters in the GPIO_InitStruct. - * @param GPIOx: where x can be (A..K) to select the GPIO peripheral for STM32F405xx/407xx and STM32F415xx/417xx devices - * x can be (A..I) to select the GPIO peripheral for STM32F42xxx/43xxx devices. - * x can be (A, B, C, D and H) to select the GPIO peripheral for STM32F401xx devices. - * @param GPIO_InitStruct: pointer to a GPIO_InitTypeDef structure that contains - * the configuration information for the specified GPIO peripheral. - * @retval None - */ -void GPIO_Init(GPIO_TypeDef* GPIOx, GPIO_InitTypeDef* GPIO_InitStruct) -{ - uint32_t pinpos = 0x00, pos = 0x00 , currentpin = 0x00; - - /* Check the parameters */ - assert_param(IS_GPIO_ALL_PERIPH(GPIOx)); - assert_param(IS_GPIO_PIN(GPIO_InitStruct->GPIO_Pin)); - assert_param(IS_GPIO_MODE(GPIO_InitStruct->GPIO_Mode)); - assert_param(IS_GPIO_PUPD(GPIO_InitStruct->GPIO_PuPd)); - - /* ------------------------- Configure the port pins ---------------- */ - /*-- GPIO Mode Configuration --*/ - for (pinpos = 0x00; pinpos < 0x10; pinpos++) - { - pos = ((uint32_t)0x01) << pinpos; - /* Get the port pins position */ - currentpin = (GPIO_InitStruct->GPIO_Pin) & pos; - - if (currentpin == pos) - { - GPIOx->MODER &= ~(GPIO_MODER_MODER0 << (pinpos * 2)); - GPIOx->MODER |= (((uint32_t)GPIO_InitStruct->GPIO_Mode) << (pinpos * 2)); - - if ((GPIO_InitStruct->GPIO_Mode == GPIO_Mode_OUT) || (GPIO_InitStruct->GPIO_Mode == GPIO_Mode_AF)) - { - /* Check Speed mode parameters */ - assert_param(IS_GPIO_SPEED(GPIO_InitStruct->GPIO_Speed)); - - /* Speed mode configuration */ - GPIOx->OSPEEDR &= ~(GPIO_OSPEEDER_OSPEEDR0 << (pinpos * 2)); - GPIOx->OSPEEDR |= ((uint32_t)(GPIO_InitStruct->GPIO_Speed) << (pinpos * 2)); - - /* Check Output mode parameters */ - assert_param(IS_GPIO_OTYPE(GPIO_InitStruct->GPIO_OType)); - - /* Output mode configuration*/ - GPIOx->OTYPER &= ~((GPIO_OTYPER_OT_0) << ((uint16_t)pinpos)) ; - GPIOx->OTYPER |= (uint16_t)(((uint16_t)GPIO_InitStruct->GPIO_OType) << ((uint16_t)pinpos)); - } - - /* Pull-up Pull down resistor configuration*/ - GPIOx->PUPDR &= ~(GPIO_PUPDR_PUPDR0 << ((uint16_t)pinpos * 2)); - GPIOx->PUPDR |= (((uint32_t)GPIO_InitStruct->GPIO_PuPd) << (pinpos * 2)); - } - } -} - -/** - * @brief Fills each GPIO_InitStruct member with its default value. - * @param GPIO_InitStruct : pointer to a GPIO_InitTypeDef structure which will be initialized. - * @retval None - */ -void GPIO_StructInit(GPIO_InitTypeDef* GPIO_InitStruct) -{ - /* Reset GPIO init structure parameters values */ - GPIO_InitStruct->GPIO_Pin = GPIO_Pin_All; - GPIO_InitStruct->GPIO_Mode = GPIO_Mode_IN; - GPIO_InitStruct->GPIO_Speed = GPIO_Speed_2MHz; - GPIO_InitStruct->GPIO_OType = GPIO_OType_PP; - GPIO_InitStruct->GPIO_PuPd = GPIO_PuPd_NOPULL; -} - -/** - * @brief Locks GPIO Pins configuration registers. - * @note The locked registers are GPIOx_MODER, GPIOx_OTYPER, GPIOx_OSPEEDR, - * GPIOx_PUPDR, GPIOx_AFRL and GPIOx_AFRH. - * @note The configuration of the locked GPIO pins can no longer be modified - * until the next reset. - * @param GPIOx: where x can be (A..K) to select the GPIO peripheral for STM32F405xx/407xx and STM32F415xx/417xx devices - * x can be (A..I) to select the GPIO peripheral for STM32F42xxx/43xxx devices. - * x can be (A, B, C, D and H) to select the GPIO peripheral for STM32F401xx devices. - * @param GPIO_Pin: specifies the port bit to be locked. - * This parameter can be any combination of GPIO_Pin_x where x can be (0..15). - * @retval None - */ -void GPIO_PinLockConfig(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin) -{ - __IO uint32_t tmp = 0x00010000; - - /* Check the parameters */ - assert_param(IS_GPIO_ALL_PERIPH(GPIOx)); - assert_param(IS_GPIO_PIN(GPIO_Pin)); - - tmp |= GPIO_Pin; - /* Set LCKK bit */ - GPIOx->LCKR = tmp; - /* Reset LCKK bit */ - GPIOx->LCKR = GPIO_Pin; - /* Set LCKK bit */ - GPIOx->LCKR = tmp; - /* Read LCKK bit*/ - tmp = GPIOx->LCKR; - /* Read LCKK bit*/ - tmp = GPIOx->LCKR; -} - -/** - * @} - */ - -/** @defgroup GPIO_Group2 GPIO Read and Write - * @brief GPIO Read and Write - * -@verbatim - =============================================================================== - ##### GPIO Read and Write ##### - =============================================================================== - -@endverbatim - * @{ - */ - -/** - * @brief Reads the specified input port pin. - * @param GPIOx: where x can be (A..K) to select the GPIO peripheral for STM32F405xx/407xx and STM32F415xx/417xx devices - * x can be (A..I) to select the GPIO peripheral for STM32F42xxx/43xxx devices. - * x can be (A, B, C, D and H) to select the GPIO peripheral for STM32F401xx devices. - * @param GPIO_Pin: specifies the port bit to read. - * This parameter can be GPIO_Pin_x where x can be (0..15). - * @retval The input port pin value. - */ -uint8_t GPIO_ReadInputDataBit(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin) -{ - uint8_t bitstatus = 0x00; - - /* Check the parameters */ - assert_param(IS_GPIO_ALL_PERIPH(GPIOx)); - assert_param(IS_GET_GPIO_PIN(GPIO_Pin)); - - if ((GPIOx->IDR & GPIO_Pin) != (uint32_t)Bit_RESET) - { - bitstatus = (uint8_t)Bit_SET; - } - else - { - bitstatus = (uint8_t)Bit_RESET; - } - return bitstatus; -} - -/** - * @brief Reads the specified GPIO input data port. - * @param GPIOx: where x can be (A..K) to select the GPIO peripheral for STM32F405xx/407xx and STM32F415xx/417xx devices - * x can be (A..I) to select the GPIO peripheral for STM32F42xxx/43xxx devices. - * x can be (A, B, C, D and H) to select the GPIO peripheral for STM32F401xx devices. - * @retval GPIO input data port value. - */ -uint16_t GPIO_ReadInputData(GPIO_TypeDef* GPIOx) -{ - /* Check the parameters */ - assert_param(IS_GPIO_ALL_PERIPH(GPIOx)); - - return ((uint16_t)GPIOx->IDR); -} - -/** - * @brief Reads the specified output data port bit. - * @param GPIOx: where x can be (A..K) to select the GPIO peripheral for STM32F405xx/407xx and STM32F415xx/417xx devices - * x can be (A..I) to select the GPIO peripheral for STM32F42xxx/43xxx devices. - * x can be (A, B, C, D and H) to select the GPIO peripheral for STM32F401xx devices. - * @param GPIO_Pin: specifies the port bit to read. - * This parameter can be GPIO_Pin_x where x can be (0..15). - * @retval The output port pin value. - */ -uint8_t GPIO_ReadOutputDataBit(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin) -{ - uint8_t bitstatus = 0x00; - - /* Check the parameters */ - assert_param(IS_GPIO_ALL_PERIPH(GPIOx)); - assert_param(IS_GET_GPIO_PIN(GPIO_Pin)); - - if (((GPIOx->ODR) & GPIO_Pin) != (uint32_t)Bit_RESET) - { - bitstatus = (uint8_t)Bit_SET; - } - else - { - bitstatus = (uint8_t)Bit_RESET; - } - return bitstatus; -} - -/** - * @brief Reads the specified GPIO output data port. - * @param GPIOx: where x can be (A..K) to select the GPIO peripheral for STM32F405xx/407xx and STM32F415xx/417xx devices - * x can be (A..I) to select the GPIO peripheral for STM32F42xxx/43xxx devices. - * x can be (A, B, C, D and H) to select the GPIO peripheral for STM32F401xx devices. - * @retval GPIO output data port value. - */ -uint16_t GPIO_ReadOutputData(GPIO_TypeDef* GPIOx) -{ - /* Check the parameters */ - assert_param(IS_GPIO_ALL_PERIPH(GPIOx)); - - return ((uint16_t)GPIOx->ODR); -} - -/** - * @brief Sets the selected data port bits. - * @note This functions uses GPIOx_BSRR register to allow atomic read/modify - * accesses. In this way, there is no risk of an IRQ occurring between - * the read and the modify access. - * @param GPIOx: where x can be (A..K) to select the GPIO peripheral for STM32F405xx/407xx and STM32F415xx/417xx devices - * x can be (A..I) to select the GPIO peripheral for STM32F42xxx/43xxx devices. - * x can be (A, B, C, D and H) to select the GPIO peripheral for STM32F401xx devices. - * @param GPIO_Pin: specifies the port bits to be written. - * This parameter can be any combination of GPIO_Pin_x where x can be (0..15). - * @retval None - */ -void GPIO_SetBits(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin) -{ - /* Check the parameters */ - assert_param(IS_GPIO_ALL_PERIPH(GPIOx)); - assert_param(IS_GPIO_PIN(GPIO_Pin)); - - GPIOx->BSRRL = GPIO_Pin; -} - -/** - * @brief Clears the selected data port bits. - * @note This functions uses GPIOx_BSRR register to allow atomic read/modify - * accesses. In this way, there is no risk of an IRQ occurring between - * the read and the modify access. - * @param GPIOx: where x can be (A..K) to select the GPIO peripheral for STM32F405xx/407xx and STM32F415xx/417xx devices - * x can be (A..I) to select the GPIO peripheral for STM32F42xxx/43xxx devices. - * x can be (A, B, C, D and H) to select the GPIO peripheral for STM32F401xx devices. - * @param GPIO_Pin: specifies the port bits to be written. - * This parameter can be any combination of GPIO_Pin_x where x can be (0..15). - * @retval None - */ -void GPIO_ResetBits(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin) -{ - /* Check the parameters */ - assert_param(IS_GPIO_ALL_PERIPH(GPIOx)); - assert_param(IS_GPIO_PIN(GPIO_Pin)); - - GPIOx->BSRRH = GPIO_Pin; -} - -/** - * @brief Sets or clears the selected data port bit. - * @param GPIOx: where x can be (A..K) to select the GPIO peripheral for STM32F405xx/407xx and STM32F415xx/417xx devices - * x can be (A..I) to select the GPIO peripheral for STM32F42xxx/43xxx devices. - * x can be (A, B, C, D and H) to select the GPIO peripheral for STM32F401xx devices. - * @param GPIO_Pin: specifies the port bit to be written. - * This parameter can be one of GPIO_Pin_x where x can be (0..15). - * @param BitVal: specifies the value to be written to the selected bit. - * This parameter can be one of the BitAction enum values: - * @arg Bit_RESET: to clear the port pin - * @arg Bit_SET: to set the port pin - * @retval None - */ -void GPIO_WriteBit(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin, BitAction BitVal) -{ - /* Check the parameters */ - assert_param(IS_GPIO_ALL_PERIPH(GPIOx)); - assert_param(IS_GET_GPIO_PIN(GPIO_Pin)); - assert_param(IS_GPIO_BIT_ACTION(BitVal)); - - if (BitVal != Bit_RESET) - { - GPIOx->BSRRL = GPIO_Pin; - } - else - { - GPIOx->BSRRH = GPIO_Pin ; - } -} - -/** - * @brief Writes data to the specified GPIO data port. - * @param GPIOx: where x can be (A..K) to select the GPIO peripheral for STM32F405xx/407xx and STM32F415xx/417xx devices - * x can be (A..I) to select the GPIO peripheral for STM32F42xxx/43xxx devices. - * x can be (A, B, C, D and H) to select the GPIO peripheral for STM32F401xx devices. - * @param PortVal: specifies the value to be written to the port output data register. - * @retval None - */ -void GPIO_Write(GPIO_TypeDef* GPIOx, uint16_t PortVal) -{ - /* Check the parameters */ - assert_param(IS_GPIO_ALL_PERIPH(GPIOx)); - - GPIOx->ODR = PortVal; -} - -/** - * @brief Toggles the specified GPIO pins.. - * @param GPIOx: where x can be (A..K) to select the GPIO peripheral for STM32F405xx/407xx and STM32F415xx/417xx devices - * x can be (A..I) to select the GPIO peripheral for STM32F42xxx/43xxx devices. - * x can be (A, B, C, D and H) to select the GPIO peripheral for STM32F401xx devices. - * @param GPIO_Pin: Specifies the pins to be toggled. - * @retval None - */ -void GPIO_ToggleBits(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin) -{ - /* Check the parameters */ - assert_param(IS_GPIO_ALL_PERIPH(GPIOx)); - - GPIOx->ODR ^= GPIO_Pin; -} - -/** - * @} - */ - -/** @defgroup GPIO_Group3 GPIO Alternate functions configuration function - * @brief GPIO Alternate functions configuration function - * -@verbatim - =============================================================================== - ##### GPIO Alternate functions configuration function ##### - =============================================================================== - -@endverbatim - * @{ - */ - -/** - * @brief Changes the mapping of the specified pin. - * @param GPIOx: where x can be (A..K) to select the GPIO peripheral for STM32F405xx/407xx and STM32F415xx/417xx devices - * x can be (A..I) to select the GPIO peripheral for STM32F42xxx/43xxx devices. - * x can be (A, B, C, D and H) to select the GPIO peripheral for STM32F401xx devices. - * @param GPIO_PinSource: specifies the pin for the Alternate function. - * This parameter can be GPIO_PinSourcex where x can be (0..15). - * @param GPIO_AFSelection: selects the pin to used as Alternate function. - * This parameter can be one of the following values: - * @arg GPIO_AF_RTC_50Hz: Connect RTC_50Hz pin to AF0 (default after reset) - * @arg GPIO_AF_MCO: Connect MCO pin (MCO1 and MCO2) to AF0 (default after reset) - * @arg GPIO_AF_TAMPER: Connect TAMPER pins (TAMPER_1 and TAMPER_2) to AF0 (default after reset) - * @arg GPIO_AF_SWJ: Connect SWJ pins (SWD and JTAG)to AF0 (default after reset) - * @arg GPIO_AF_TRACE: Connect TRACE pins to AF0 (default after reset) - * @arg GPIO_AF_TIM1: Connect TIM1 pins to AF1 - * @arg GPIO_AF_TIM2: Connect TIM2 pins to AF1 - * @arg GPIO_AF_TIM3: Connect TIM3 pins to AF2 - * @arg GPIO_AF_TIM4: Connect TIM4 pins to AF2 - * @arg GPIO_AF_TIM5: Connect TIM5 pins to AF2 - * @arg GPIO_AF_TIM8: Connect TIM8 pins to AF3 - * @arg GPIO_AF_TIM9: Connect TIM9 pins to AF3 - * @arg GPIO_AF_TIM10: Connect TIM10 pins to AF3 - * @arg GPIO_AF_TIM11: Connect TIM11 pins to AF3 - * @arg GPIO_AF_I2C1: Connect I2C1 pins to AF4 - * @arg GPIO_AF_I2C2: Connect I2C2 pins to AF4 - * @arg GPIO_AF_I2C3: Connect I2C3 pins to AF4 - * @arg GPIO_AF_SPI1: Connect SPI1 pins to AF5 - * @arg GPIO_AF_SPI2: Connect SPI2/I2S2 pins to AF5 - * @arg GPIO_AF_SPI4: Connect SPI4 pins to AF5 - * @arg GPIO_AF_SPI5: Connect SPI5 pins to AF5 - * @arg GPIO_AF_SPI6: Connect SPI6 pins to AF5 - * @arg GPIO_AF_SAI1: Connect SAI1 pins to AF6 for STM32F42xxx/43xxx devices. - * @arg GPIO_AF_SPI3: Connect SPI3/I2S3 pins to AF6 - * @arg GPIO_AF_I2S3ext: Connect I2S3ext pins to AF7 - * @arg GPIO_AF_USART1: Connect USART1 pins to AF7 - * @arg GPIO_AF_USART2: Connect USART2 pins to AF7 - * @arg GPIO_AF_USART3: Connect USART3 pins to AF7 - * @arg GPIO_AF_UART4: Connect UART4 pins to AF8 - * @arg GPIO_AF_UART5: Connect UART5 pins to AF8 - * @arg GPIO_AF_USART6: Connect USART6 pins to AF8 - * @arg GPIO_AF_UART7: Connect UART7 pins to AF8 - * @arg GPIO_AF_UART8: Connect UART8 pins to AF8 - * @arg GPIO_AF_CAN1: Connect CAN1 pins to AF9 - * @arg GPIO_AF_CAN2: Connect CAN2 pins to AF9 - * @arg GPIO_AF_TIM12: Connect TIM12 pins to AF9 - * @arg GPIO_AF_TIM13: Connect TIM13 pins to AF9 - * @arg GPIO_AF_TIM14: Connect TIM14 pins to AF9 - * @arg GPIO_AF_OTG_FS: Connect OTG_FS pins to AF10 - * @arg GPIO_AF_OTG_HS: Connect OTG_HS pins to AF10 - * @arg GPIO_AF_ETH: Connect ETHERNET pins to AF11 - * @arg GPIO_AF_FSMC: Connect FSMC pins to AF12 - * @arg GPIO_AF_FMC: Connect FMC pins to AF12 for STM32F42xxx/43xxx devices. - * @arg GPIO_AF_OTG_HS_FS: Connect OTG HS (configured in FS) pins to AF12 - * @arg GPIO_AF_SDIO: Connect SDIO pins to AF12 - * @arg GPIO_AF_DCMI: Connect DCMI pins to AF13 - * @arg GPIO_AF_LTDC: Connect LTDC pins to AF14 for STM32F429xx/439xx devices. - * @arg GPIO_AF_EVENTOUT: Connect EVENTOUT pins to AF15 - * @retval None - */ -void GPIO_PinAFConfig(GPIO_TypeDef* GPIOx, uint16_t GPIO_PinSource, uint8_t GPIO_AF) -{ - uint32_t temp = 0x00; - uint32_t temp_2 = 0x00; - - /* Check the parameters */ - assert_param(IS_GPIO_ALL_PERIPH(GPIOx)); - assert_param(IS_GPIO_PIN_SOURCE(GPIO_PinSource)); - assert_param(IS_GPIO_AF(GPIO_AF)); - - temp = ((uint32_t)(GPIO_AF) << ((uint32_t)((uint32_t)GPIO_PinSource & (uint32_t)0x07) * 4)) ; - GPIOx->AFR[GPIO_PinSource >> 0x03] &= ~((uint32_t)0xF << ((uint32_t)((uint32_t)GPIO_PinSource & (uint32_t)0x07) * 4)) ; - temp_2 = GPIOx->AFR[GPIO_PinSource >> 0x03] | temp; - GPIOx->AFR[GPIO_PinSource >> 0x03] = temp_2; -} - -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/stm/lib/stm32f4xx_gpio.h b/stm/lib/stm32f4xx_gpio.h deleted file mode 100644 index d93b14197..000000000 --- a/stm/lib/stm32f4xx_gpio.h +++ /dev/null @@ -1,489 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f4xx_gpio.h - * @author MCD Application Team - * @version V1.3.0 - * @date 08-November-2013 - * @brief This file contains all the functions prototypes for the GPIO firmware - * library. - ****************************************************************************** - * @attention - * - *

© COPYRIGHT 2013 STMicroelectronics

- * - * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License"); - * You may not use this file except in compliance with the License. - * You may obtain a copy of the License at: - * - * http://www.st.com/software_license_agreement_liberty_v2 - * - * Unless required by applicable law or agreed to in writing, software - * distributed under the License is distributed on an "AS IS" BASIS, - * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - * See the License for the specific language governing permissions and - * limitations under the License. - * - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F4xx_GPIO_H -#define __STM32F4xx_GPIO_H - -#ifdef __cplusplus - extern "C" { -#endif - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx.h" - -/** @addtogroup STM32F4xx_StdPeriph_Driver - * @{ - */ - -/** @addtogroup GPIO - * @{ - */ - -/* Exported types ------------------------------------------------------------*/ - -#define IS_GPIO_ALL_PERIPH(PERIPH) (((PERIPH) == GPIOA) || \ - ((PERIPH) == GPIOB) || \ - ((PERIPH) == GPIOC) || \ - ((PERIPH) == GPIOD) || \ - ((PERIPH) == GPIOE) || \ - ((PERIPH) == GPIOF) || \ - ((PERIPH) == GPIOG) || \ - ((PERIPH) == GPIOH) || \ - ((PERIPH) == GPIOI) || \ - ((PERIPH) == GPIOJ) || \ - ((PERIPH) == GPIOK)) - -/** - * @brief GPIO Configuration Mode enumeration - */ -typedef enum -{ - GPIO_Mode_IN = 0x00, /*!< GPIO Input Mode */ - GPIO_Mode_OUT = 0x01, /*!< GPIO Output Mode */ - GPIO_Mode_AF = 0x02, /*!< GPIO Alternate function Mode */ - GPIO_Mode_AN = 0x03 /*!< GPIO Analog Mode */ -}GPIOMode_TypeDef; -#define IS_GPIO_MODE(MODE) (((MODE) == GPIO_Mode_IN) || ((MODE) == GPIO_Mode_OUT) || \ - ((MODE) == GPIO_Mode_AF)|| ((MODE) == GPIO_Mode_AN)) - -/** - * @brief GPIO Output type enumeration - */ -typedef enum -{ - GPIO_OType_PP = 0x00, - GPIO_OType_OD = 0x01 -}GPIOOType_TypeDef; -#define IS_GPIO_OTYPE(OTYPE) (((OTYPE) == GPIO_OType_PP) || ((OTYPE) == GPIO_OType_OD)) - - -/** - * @brief GPIO Output Maximum frequency enumeration - */ -typedef enum -{ - GPIO_Low_Speed = 0x00, /*!< Low speed */ - GPIO_Medium_Speed = 0x01, /*!< Medium speed */ - GPIO_Fast_Speed = 0x02, /*!< Fast speed */ - GPIO_High_Speed = 0x03 /*!< High speed */ -}GPIOSpeed_TypeDef; - -/* Add legacy definition */ -#define GPIO_Speed_2MHz GPIO_Low_Speed -#define GPIO_Speed_25MHz GPIO_Medium_Speed -#define GPIO_Speed_50MHz GPIO_Fast_Speed -#define GPIO_Speed_100MHz GPIO_High_Speed - -#define IS_GPIO_SPEED(SPEED) (((SPEED) == GPIO_Low_Speed) || ((SPEED) == GPIO_Medium_Speed) || \ - ((SPEED) == GPIO_Fast_Speed)|| ((SPEED) == GPIO_High_Speed)) - -/** - * @brief GPIO Configuration PullUp PullDown enumeration - */ -typedef enum -{ - GPIO_PuPd_NOPULL = 0x00, - GPIO_PuPd_UP = 0x01, - GPIO_PuPd_DOWN = 0x02 -}GPIOPuPd_TypeDef; -#define IS_GPIO_PUPD(PUPD) (((PUPD) == GPIO_PuPd_NOPULL) || ((PUPD) == GPIO_PuPd_UP) || \ - ((PUPD) == GPIO_PuPd_DOWN)) - -/** - * @brief GPIO Bit SET and Bit RESET enumeration - */ -typedef enum -{ - Bit_RESET = 0, - Bit_SET -}BitAction; -#define IS_GPIO_BIT_ACTION(ACTION) (((ACTION) == Bit_RESET) || ((ACTION) == Bit_SET)) - - -/** - * @brief GPIO Init structure definition - */ -typedef struct -{ - uint32_t GPIO_Pin; /*!< Specifies the GPIO pins to be configured. - This parameter can be any value of @ref GPIO_pins_define */ - - GPIOMode_TypeDef GPIO_Mode; /*!< Specifies the operating mode for the selected pins. - This parameter can be a value of @ref GPIOMode_TypeDef */ - - GPIOSpeed_TypeDef GPIO_Speed; /*!< Specifies the speed for the selected pins. - This parameter can be a value of @ref GPIOSpeed_TypeDef */ - - GPIOOType_TypeDef GPIO_OType; /*!< Specifies the operating output type for the selected pins. - This parameter can be a value of @ref GPIOOType_TypeDef */ - - GPIOPuPd_TypeDef GPIO_PuPd; /*!< Specifies the operating Pull-up/Pull down for the selected pins. - This parameter can be a value of @ref GPIOPuPd_TypeDef */ -}GPIO_InitTypeDef; - -/* Exported constants --------------------------------------------------------*/ - -/** @defgroup GPIO_Exported_Constants - * @{ - */ - -/** @defgroup GPIO_pins_define - * @{ - */ -#define GPIO_Pin_0 ((uint16_t)0x0001) /* Pin 0 selected */ -#define GPIO_Pin_1 ((uint16_t)0x0002) /* Pin 1 selected */ -#define GPIO_Pin_2 ((uint16_t)0x0004) /* Pin 2 selected */ -#define GPIO_Pin_3 ((uint16_t)0x0008) /* Pin 3 selected */ -#define GPIO_Pin_4 ((uint16_t)0x0010) /* Pin 4 selected */ -#define GPIO_Pin_5 ((uint16_t)0x0020) /* Pin 5 selected */ -#define GPIO_Pin_6 ((uint16_t)0x0040) /* Pin 6 selected */ -#define GPIO_Pin_7 ((uint16_t)0x0080) /* Pin 7 selected */ -#define GPIO_Pin_8 ((uint16_t)0x0100) /* Pin 8 selected */ -#define GPIO_Pin_9 ((uint16_t)0x0200) /* Pin 9 selected */ -#define GPIO_Pin_10 ((uint16_t)0x0400) /* Pin 10 selected */ -#define GPIO_Pin_11 ((uint16_t)0x0800) /* Pin 11 selected */ -#define GPIO_Pin_12 ((uint16_t)0x1000) /* Pin 12 selected */ -#define GPIO_Pin_13 ((uint16_t)0x2000) /* Pin 13 selected */ -#define GPIO_Pin_14 ((uint16_t)0x4000) /* Pin 14 selected */ -#define GPIO_Pin_15 ((uint16_t)0x8000) /* Pin 15 selected */ -#define GPIO_Pin_All ((uint16_t)0xFFFF) /* All pins selected */ - -#define IS_GPIO_PIN(PIN) ((((PIN) & (uint16_t)0x00) == 0x00) && ((PIN) != (uint16_t)0x00)) -#define IS_GET_GPIO_PIN(PIN) (((PIN) == GPIO_Pin_0) || \ - ((PIN) == GPIO_Pin_1) || \ - ((PIN) == GPIO_Pin_2) || \ - ((PIN) == GPIO_Pin_3) || \ - ((PIN) == GPIO_Pin_4) || \ - ((PIN) == GPIO_Pin_5) || \ - ((PIN) == GPIO_Pin_6) || \ - ((PIN) == GPIO_Pin_7) || \ - ((PIN) == GPIO_Pin_8) || \ - ((PIN) == GPIO_Pin_9) || \ - ((PIN) == GPIO_Pin_10) || \ - ((PIN) == GPIO_Pin_11) || \ - ((PIN) == GPIO_Pin_12) || \ - ((PIN) == GPIO_Pin_13) || \ - ((PIN) == GPIO_Pin_14) || \ - ((PIN) == GPIO_Pin_15)) -/** - * @} - */ - - -/** @defgroup GPIO_Pin_sources - * @{ - */ -#define GPIO_PinSource0 ((uint8_t)0x00) -#define GPIO_PinSource1 ((uint8_t)0x01) -#define GPIO_PinSource2 ((uint8_t)0x02) -#define GPIO_PinSource3 ((uint8_t)0x03) -#define GPIO_PinSource4 ((uint8_t)0x04) -#define GPIO_PinSource5 ((uint8_t)0x05) -#define GPIO_PinSource6 ((uint8_t)0x06) -#define GPIO_PinSource7 ((uint8_t)0x07) -#define GPIO_PinSource8 ((uint8_t)0x08) -#define GPIO_PinSource9 ((uint8_t)0x09) -#define GPIO_PinSource10 ((uint8_t)0x0A) -#define GPIO_PinSource11 ((uint8_t)0x0B) -#define GPIO_PinSource12 ((uint8_t)0x0C) -#define GPIO_PinSource13 ((uint8_t)0x0D) -#define GPIO_PinSource14 ((uint8_t)0x0E) -#define GPIO_PinSource15 ((uint8_t)0x0F) - -#define IS_GPIO_PIN_SOURCE(PINSOURCE) (((PINSOURCE) == GPIO_PinSource0) || \ - ((PINSOURCE) == GPIO_PinSource1) || \ - ((PINSOURCE) == GPIO_PinSource2) || \ - ((PINSOURCE) == GPIO_PinSource3) || \ - ((PINSOURCE) == GPIO_PinSource4) || \ - ((PINSOURCE) == GPIO_PinSource5) || \ - ((PINSOURCE) == GPIO_PinSource6) || \ - ((PINSOURCE) == GPIO_PinSource7) || \ - ((PINSOURCE) == GPIO_PinSource8) || \ - ((PINSOURCE) == GPIO_PinSource9) || \ - ((PINSOURCE) == GPIO_PinSource10) || \ - ((PINSOURCE) == GPIO_PinSource11) || \ - ((PINSOURCE) == GPIO_PinSource12) || \ - ((PINSOURCE) == GPIO_PinSource13) || \ - ((PINSOURCE) == GPIO_PinSource14) || \ - ((PINSOURCE) == GPIO_PinSource15)) -/** - * @} - */ - -/** @defgroup GPIO_Alternat_function_selection_define - * @{ - */ -/** - * @brief AF 0 selection - */ -#define GPIO_AF_RTC_50Hz ((uint8_t)0x00) /* RTC_50Hz Alternate Function mapping */ -#define GPIO_AF_MCO ((uint8_t)0x00) /* MCO (MCO1 and MCO2) Alternate Function mapping */ -#define GPIO_AF_TAMPER ((uint8_t)0x00) /* TAMPER (TAMPER_1 and TAMPER_2) Alternate Function mapping */ -#define GPIO_AF_SWJ ((uint8_t)0x00) /* SWJ (SWD and JTAG) Alternate Function mapping */ -#define GPIO_AF_TRACE ((uint8_t)0x00) /* TRACE Alternate Function mapping */ - -/** - * @brief AF 1 selection - */ -#define GPIO_AF_TIM1 ((uint8_t)0x01) /* TIM1 Alternate Function mapping */ -#define GPIO_AF_TIM2 ((uint8_t)0x01) /* TIM2 Alternate Function mapping */ - -/** - * @brief AF 2 selection - */ -#define GPIO_AF_TIM3 ((uint8_t)0x02) /* TIM3 Alternate Function mapping */ -#define GPIO_AF_TIM4 ((uint8_t)0x02) /* TIM4 Alternate Function mapping */ -#define GPIO_AF_TIM5 ((uint8_t)0x02) /* TIM5 Alternate Function mapping */ - -/** - * @brief AF 3 selection - */ -#define GPIO_AF_TIM8 ((uint8_t)0x03) /* TIM8 Alternate Function mapping */ -#define GPIO_AF_TIM9 ((uint8_t)0x03) /* TIM9 Alternate Function mapping */ -#define GPIO_AF_TIM10 ((uint8_t)0x03) /* TIM10 Alternate Function mapping */ -#define GPIO_AF_TIM11 ((uint8_t)0x03) /* TIM11 Alternate Function mapping */ - -/** - * @brief AF 4 selection - */ -#define GPIO_AF_I2C1 ((uint8_t)0x04) /* I2C1 Alternate Function mapping */ -#define GPIO_AF_I2C2 ((uint8_t)0x04) /* I2C2 Alternate Function mapping */ -#define GPIO_AF_I2C3 ((uint8_t)0x04) /* I2C3 Alternate Function mapping */ - -/** - * @brief AF 5 selection - */ -#define GPIO_AF_SPI1 ((uint8_t)0x05) /* SPI1 Alternate Function mapping */ -#define GPIO_AF_SPI2 ((uint8_t)0x05) /* SPI2/I2S2 Alternate Function mapping */ -#define GPIO_AF_SPI4 ((uint8_t)0x05) /* SPI4 Alternate Function mapping */ -#define GPIO_AF_SPI5 ((uint8_t)0x05) /* SPI5 Alternate Function mapping */ -#define GPIO_AF_SPI6 ((uint8_t)0x05) /* SPI6 Alternate Function mapping */ - -/** - * @brief AF 6 selection - */ -#define GPIO_AF_SPI3 ((uint8_t)0x06) /* SPI3/I2S3 Alternate Function mapping */ - -#define GPIO_AF_SAI1 ((uint8_t)0x06) /* SAI1 Alternate Function mapping */ - -/** - * @brief AF 7 selection - */ -#define GPIO_AF_USART1 ((uint8_t)0x07) /* USART1 Alternate Function mapping */ -#define GPIO_AF_USART2 ((uint8_t)0x07) /* USART2 Alternate Function mapping */ -#define GPIO_AF_USART3 ((uint8_t)0x07) /* USART3 Alternate Function mapping */ -#define GPIO_AF_I2S3ext ((uint8_t)0x07) /* I2S3ext Alternate Function mapping */ - -/** - * @brief AF 8 selection - */ -#define GPIO_AF_UART4 ((uint8_t)0x08) /* UART4 Alternate Function mapping */ -#define GPIO_AF_UART5 ((uint8_t)0x08) /* UART5 Alternate Function mapping */ -#define GPIO_AF_USART6 ((uint8_t)0x08) /* USART6 Alternate Function mapping */ -#define GPIO_AF_UART7 ((uint8_t)0x08) /* UART7 Alternate Function mapping */ -#define GPIO_AF_UART8 ((uint8_t)0x08) /* UART8 Alternate Function mapping */ - -/** - * @brief AF 9 selection - */ -#define GPIO_AF_CAN1 ((uint8_t)0x09) /* CAN1 Alternate Function mapping */ -#define GPIO_AF_CAN2 ((uint8_t)0x09) /* CAN2 Alternate Function mapping */ -#define GPIO_AF_TIM12 ((uint8_t)0x09) /* TIM12 Alternate Function mapping */ -#define GPIO_AF_TIM13 ((uint8_t)0x09) /* TIM13 Alternate Function mapping */ -#define GPIO_AF_TIM14 ((uint8_t)0x09) /* TIM14 Alternate Function mapping */ - -#define GPIO_AF9_I2C2 ((uint8_t)0x09) /* I2C2 Alternate Function mapping (Only for STM32F401xx Devices) */ -#define GPIO_AF9_I2C3 ((uint8_t)0x09) /* I2C3 Alternate Function mapping (Only for STM32F401xx Devices) */ - -/** - * @brief AF 10 selection - */ -#define GPIO_AF_OTG_FS ((uint8_t)0xA) /* OTG_FS Alternate Function mapping */ -#define GPIO_AF_OTG_HS ((uint8_t)0xA) /* OTG_HS Alternate Function mapping */ - -/** - * @brief AF 11 selection - */ -#define GPIO_AF_ETH ((uint8_t)0x0B) /* ETHERNET Alternate Function mapping */ - -/** - * @brief AF 12 selection - */ -#if defined (STM32F40_41xxx) -#define GPIO_AF_FSMC ((uint8_t)0xC) /* FSMC Alternate Function mapping */ -#endif /* STM32F40_41xxx */ - -#if defined (STM32F427_437xx) || defined (STM32F429_439xx) -#define GPIO_AF_FMC ((uint8_t)0xC) /* FMC Alternate Function mapping */ -#endif /* STM32F427_437xx || STM32F429_439xx */ - -#define GPIO_AF_OTG_HS_FS ((uint8_t)0xC) /* OTG HS configured in FS, Alternate Function mapping */ -#define GPIO_AF_SDIO ((uint8_t)0xC) /* SDIO Alternate Function mapping */ - -/** - * @brief AF 13 selection - */ -#define GPIO_AF_DCMI ((uint8_t)0x0D) /* DCMI Alternate Function mapping */ - -/** - * @brief AF 14 selection - */ - -#define GPIO_AF_LTDC ((uint8_t)0x0E) /* LCD-TFT Alternate Function mapping */ - -/** - * @brief AF 15 selection - */ -#define GPIO_AF_EVENTOUT ((uint8_t)0x0F) /* EVENTOUT Alternate Function mapping */ - -#if defined (STM32F40_41xxx) -#define IS_GPIO_AF(AF) (((AF) == GPIO_AF_RTC_50Hz) || ((AF) == GPIO_AF_TIM14) || \ - ((AF) == GPIO_AF_MCO) || ((AF) == GPIO_AF_TAMPER) || \ - ((AF) == GPIO_AF_SWJ) || ((AF) == GPIO_AF_TRACE) || \ - ((AF) == GPIO_AF_TIM1) || ((AF) == GPIO_AF_TIM2) || \ - ((AF) == GPIO_AF_TIM3) || ((AF) == GPIO_AF_TIM4) || \ - ((AF) == GPIO_AF_TIM5) || ((AF) == GPIO_AF_TIM8) || \ - ((AF) == GPIO_AF_I2C1) || ((AF) == GPIO_AF_I2C2) || \ - ((AF) == GPIO_AF_I2C3) || ((AF) == GPIO_AF_SPI1) || \ - ((AF) == GPIO_AF_SPI2) || ((AF) == GPIO_AF_TIM13) || \ - ((AF) == GPIO_AF_SPI3) || ((AF) == GPIO_AF_TIM14) || \ - ((AF) == GPIO_AF_USART1) || ((AF) == GPIO_AF_USART2) || \ - ((AF) == GPIO_AF_USART3) || ((AF) == GPIO_AF_UART4) || \ - ((AF) == GPIO_AF_UART5) || ((AF) == GPIO_AF_USART6) || \ - ((AF) == GPIO_AF_CAN1) || ((AF) == GPIO_AF_CAN2) || \ - ((AF) == GPIO_AF_OTG_FS) || ((AF) == GPIO_AF_OTG_HS) || \ - ((AF) == GPIO_AF_ETH) || ((AF) == GPIO_AF_OTG_HS_FS) || \ - ((AF) == GPIO_AF_SDIO) || ((AF) == GPIO_AF_DCMI) || \ - ((AF) == GPIO_AF_EVENTOUT) || ((AF) == GPIO_AF_FSMC)) -#endif /* STM32F40_41xxx */ - -#if defined (STM32F401xx) -#define IS_GPIO_AF(AF) (((AF) == GPIO_AF_RTC_50Hz) || ((AF) == GPIO_AF_TIM14) || \ - ((AF) == GPIO_AF_MCO) || ((AF) == GPIO_AF_TAMPER) || \ - ((AF) == GPIO_AF_SWJ) || ((AF) == GPIO_AF_TRACE) || \ - ((AF) == GPIO_AF_TIM1) || ((AF) == GPIO_AF_TIM2) || \ - ((AF) == GPIO_AF_TIM3) || ((AF) == GPIO_AF_TIM4) || \ - ((AF) == GPIO_AF_TIM5) || ((AF) == GPIO_AF_TIM8) || \ - ((AF) == GPIO_AF_I2C1) || ((AF) == GPIO_AF_I2C2) || \ - ((AF) == GPIO_AF_I2C3) || ((AF) == GPIO_AF_SPI1) || \ - ((AF) == GPIO_AF_SPI2) || ((AF) == GPIO_AF_TIM13) || \ - ((AF) == GPIO_AF_SPI3) || ((AF) == GPIO_AF_TIM14) || \ - ((AF) == GPIO_AF_USART1) || ((AF) == GPIO_AF_USART2) || \ - ((AF) == GPIO_AF_SDIO) || ((AF) == GPIO_AF_USART6) || \ - ((AF) == GPIO_AF_OTG_FS) || ((AF) == GPIO_AF_OTG_HS) || \ - ((AF) == GPIO_AF_EVENTOUT) || ((AF) == GPIO_AF_SPI4)) -#endif /* STM32F401xx */ - -#if defined (STM32F427_437xx) || defined (STM32F429_439xx) -#define IS_GPIO_AF(AF) (((AF) == GPIO_AF_RTC_50Hz) || ((AF) == GPIO_AF_TIM14) || \ - ((AF) == GPIO_AF_MCO) || ((AF) == GPIO_AF_TAMPER) || \ - ((AF) == GPIO_AF_SWJ) || ((AF) == GPIO_AF_TRACE) || \ - ((AF) == GPIO_AF_TIM1) || ((AF) == GPIO_AF_TIM2) || \ - ((AF) == GPIO_AF_TIM3) || ((AF) == GPIO_AF_TIM4) || \ - ((AF) == GPIO_AF_TIM5) || ((AF) == GPIO_AF_TIM8) || \ - ((AF) == GPIO_AF_I2C1) || ((AF) == GPIO_AF_I2C2) || \ - ((AF) == GPIO_AF_I2C3) || ((AF) == GPIO_AF_SPI1) || \ - ((AF) == GPIO_AF_SPI2) || ((AF) == GPIO_AF_TIM13) || \ - ((AF) == GPIO_AF_SPI3) || ((AF) == GPIO_AF_TIM14) || \ - ((AF) == GPIO_AF_USART1) || ((AF) == GPIO_AF_USART2) || \ - ((AF) == GPIO_AF_USART3) || ((AF) == GPIO_AF_UART4) || \ - ((AF) == GPIO_AF_UART5) || ((AF) == GPIO_AF_USART6) || \ - ((AF) == GPIO_AF_CAN1) || ((AF) == GPIO_AF_CAN2) || \ - ((AF) == GPIO_AF_OTG_FS) || ((AF) == GPIO_AF_OTG_HS) || \ - ((AF) == GPIO_AF_ETH) || ((AF) == GPIO_AF_OTG_HS_FS) || \ - ((AF) == GPIO_AF_SDIO) || ((AF) == GPIO_AF_DCMI) || \ - ((AF) == GPIO_AF_EVENTOUT) || ((AF) == GPIO_AF_SPI4) || \ - ((AF) == GPIO_AF_SPI5) || ((AF) == GPIO_AF_SPI6) || \ - ((AF) == GPIO_AF_UART7) || ((AF) == GPIO_AF_UART8) || \ - ((AF) == GPIO_AF_FMC) || ((AF) == GPIO_AF_SAI1) || \ - ((AF) == GPIO_AF_LTDC)) -#endif /* STM32F427_437xx || STM32F429_439xx */ - -/** - * @} - */ - -/** @defgroup GPIO_Legacy - * @{ - */ - -#define GPIO_Mode_AIN GPIO_Mode_AN - -#define GPIO_AF_OTG1_FS GPIO_AF_OTG_FS -#define GPIO_AF_OTG2_HS GPIO_AF_OTG_HS -#define GPIO_AF_OTG2_FS GPIO_AF_OTG_HS_FS - -/** - * @} - */ - -/** - * @} - */ - -/* Exported macro ------------------------------------------------------------*/ -/* Exported functions --------------------------------------------------------*/ - -/* Function used to set the GPIO configuration to the default reset state ****/ -void GPIO_DeInit(GPIO_TypeDef* GPIOx); - -/* Initialization and Configuration functions *********************************/ -void GPIO_Init(GPIO_TypeDef* GPIOx, GPIO_InitTypeDef* GPIO_InitStruct); -void GPIO_StructInit(GPIO_InitTypeDef* GPIO_InitStruct); -void GPIO_PinLockConfig(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin); - -/* GPIO Read and Write functions **********************************************/ -uint8_t GPIO_ReadInputDataBit(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin); -uint16_t GPIO_ReadInputData(GPIO_TypeDef* GPIOx); -uint8_t GPIO_ReadOutputDataBit(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin); -uint16_t GPIO_ReadOutputData(GPIO_TypeDef* GPIOx); -void GPIO_SetBits(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin); -void GPIO_ResetBits(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin); -void GPIO_WriteBit(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin, BitAction BitVal); -void GPIO_Write(GPIO_TypeDef* GPIOx, uint16_t PortVal); -void GPIO_ToggleBits(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin); - -/* GPIO Alternate functions configuration function ****************************/ -void GPIO_PinAFConfig(GPIO_TypeDef* GPIOx, uint16_t GPIO_PinSource, uint8_t GPIO_AF); - -#ifdef __cplusplus -} -#endif - -#endif /*__STM32F4xx_GPIO_H */ - -/** - * @} - */ - -/** - * @} - */ - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/stm/lib/stm32f4xx_i2c.c b/stm/lib/stm32f4xx_i2c.c deleted file mode 100644 index 4580c0dd7..000000000 --- a/stm/lib/stm32f4xx_i2c.c +++ /dev/null @@ -1,1462 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f4xx_i2c.c - * @author MCD Application Team - * @version V1.3.0 - * @date 08-November-2013 - * @brief This file provides firmware functions to manage the following - * functionalities of the Inter-integrated circuit (I2C) - * + Initialization and Configuration - * + Data transfers - * + PEC management - * + DMA transfers management - * + Interrupts, events and flags management - * - @verbatim - =============================================================================== - ##### How to use this driver ##### - =============================================================================== - [..] - (#) Enable peripheral clock using RCC_APB1PeriphClockCmd(RCC_APB1Periph_I2Cx, ENABLE) - function for I2C1, I2C2 or I2C3. - - (#) Enable SDA, SCL and SMBA (when used) GPIO clocks using - RCC_AHBPeriphClockCmd() function. - - (#) Peripherals alternate function: - (++) Connect the pin to the desired peripherals' Alternate - Function (AF) using GPIO_PinAFConfig() function - (++) Configure the desired pin in alternate function by: - GPIO_InitStruct->GPIO_Mode = GPIO_Mode_AF - (++) Select the type, pull-up/pull-down and output speed via - GPIO_PuPd, GPIO_OType and GPIO_Speed members - (++) Call GPIO_Init() function - Recommended configuration is Push-Pull, Pull-up, Open-Drain. - Add an external pull up if necessary (typically 4.7 KOhm). - - (#) Program the Mode, duty cycle , Own address, Ack, Speed and Acknowledged - Address using the I2C_Init() function. - - (#) Optionally you can enable/configure the following parameters without - re-initialization (i.e there is no need to call again I2C_Init() function): - (++) Enable the acknowledge feature using I2C_AcknowledgeConfig() function - (++) Enable the dual addressing mode using I2C_DualAddressCmd() function - (++) Enable the general call using the I2C_GeneralCallCmd() function - (++) Enable the clock stretching using I2C_StretchClockCmd() function - (++) Enable the fast mode duty cycle using the I2C_FastModeDutyCycleConfig() - function. - (++) Configure the NACK position for Master Receiver mode in case of - 2 bytes reception using the function I2C_NACKPositionConfig(). - (++) Enable the PEC Calculation using I2C_CalculatePEC() function - (++) For SMBus Mode: - (+++) Enable the Address Resolution Protocol (ARP) using I2C_ARPCmd() function - (+++) Configure the SMBusAlert pin using I2C_SMBusAlertConfig() function - - (#) Enable the NVIC and the corresponding interrupt using the function - I2C_ITConfig() if you need to use interrupt mode. - - (#) When using the DMA mode - (++) Configure the DMA using DMA_Init() function - (++) Active the needed channel Request using I2C_DMACmd() or - I2C_DMALastTransferCmd() function. - -@@- When using DMA mode, I2C interrupts may be used at the same time to - control the communication flow (Start/Stop/Ack... events and errors). - - (#) Enable the I2C using the I2C_Cmd() function. - - (#) Enable the DMA using the DMA_Cmd() function when using DMA mode in the - transfers. - - @endverbatim - ****************************************************************************** - * @attention - * - *

© COPYRIGHT 2013 STMicroelectronics

- * - * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License"); - * You may not use this file except in compliance with the License. - * You may obtain a copy of the License at: - * - * http://www.st.com/software_license_agreement_liberty_v2 - * - * Unless required by applicable law or agreed to in writing, software - * distributed under the License is distributed on an "AS IS" BASIS, - * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - * See the License for the specific language governing permissions and - * limitations under the License. - * - ****************************************************************************** - */ - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx_i2c.h" -#include "stm32f4xx_rcc.h" - -/** @addtogroup STM32F4xx_StdPeriph_Driver - * @{ - */ - -/** @defgroup I2C - * @brief I2C driver modules - * @{ - */ - -/* Private typedef -----------------------------------------------------------*/ -/* Private define ------------------------------------------------------------*/ - -#define CR1_CLEAR_MASK ((uint16_t)0xFBF5) /*I2C_ClockSpeed)); - assert_param(IS_I2C_MODE(I2C_InitStruct->I2C_Mode)); - assert_param(IS_I2C_DUTY_CYCLE(I2C_InitStruct->I2C_DutyCycle)); - assert_param(IS_I2C_OWN_ADDRESS1(I2C_InitStruct->I2C_OwnAddress1)); - assert_param(IS_I2C_ACK_STATE(I2C_InitStruct->I2C_Ack)); - assert_param(IS_I2C_ACKNOWLEDGE_ADDRESS(I2C_InitStruct->I2C_AcknowledgedAddress)); - -/*---------------------------- I2Cx CR2 Configuration ------------------------*/ - /* Get the I2Cx CR2 value */ - tmpreg = I2Cx->CR2; - /* Clear frequency FREQ[5:0] bits */ - tmpreg &= (uint16_t)~((uint16_t)I2C_CR2_FREQ); - /* Get pclk1 frequency value */ - RCC_GetClocksFreq(&rcc_clocks); - pclk1 = rcc_clocks.PCLK1_Frequency; - /* Set frequency bits depending on pclk1 value */ - freqrange = (uint16_t)(pclk1 / 1000000); - tmpreg |= freqrange; - /* Write to I2Cx CR2 */ - I2Cx->CR2 = tmpreg; - -/*---------------------------- I2Cx CCR Configuration ------------------------*/ - /* Disable the selected I2C peripheral to configure TRISE */ - I2Cx->CR1 &= (uint16_t)~((uint16_t)I2C_CR1_PE); - /* Reset tmpreg value */ - /* Clear F/S, DUTY and CCR[11:0] bits */ - tmpreg = 0; - - /* Configure speed in standard mode */ - if (I2C_InitStruct->I2C_ClockSpeed <= 100000) - { - /* Standard mode speed calculate */ - result = (uint16_t)(pclk1 / (I2C_InitStruct->I2C_ClockSpeed << 1)); - /* Test if CCR value is under 0x4*/ - if (result < 0x04) - { - /* Set minimum allowed value */ - result = 0x04; - } - /* Set speed value for standard mode */ - tmpreg |= result; - /* Set Maximum Rise Time for standard mode */ - I2Cx->TRISE = freqrange + 1; - } - /* Configure speed in fast mode */ - /* To use the I2C at 400 KHz (in fast mode), the PCLK1 frequency (I2C peripheral - input clock) must be a multiple of 10 MHz */ - else /*(I2C_InitStruct->I2C_ClockSpeed <= 400000)*/ - { - if (I2C_InitStruct->I2C_DutyCycle == I2C_DutyCycle_2) - { - /* Fast mode speed calculate: Tlow/Thigh = 2 */ - result = (uint16_t)(pclk1 / (I2C_InitStruct->I2C_ClockSpeed * 3)); - } - else /*I2C_InitStruct->I2C_DutyCycle == I2C_DutyCycle_16_9*/ - { - /* Fast mode speed calculate: Tlow/Thigh = 16/9 */ - result = (uint16_t)(pclk1 / (I2C_InitStruct->I2C_ClockSpeed * 25)); - /* Set DUTY bit */ - result |= I2C_DutyCycle_16_9; - } - - /* Test if CCR value is under 0x1*/ - if ((result & I2C_CCR_CCR) == 0) - { - /* Set minimum allowed value */ - result |= (uint16_t)0x0001; - } - /* Set speed value and set F/S bit for fast mode */ - tmpreg |= (uint16_t)(result | I2C_CCR_FS); - /* Set Maximum Rise Time for fast mode */ - I2Cx->TRISE = (uint16_t)(((freqrange * (uint16_t)300) / (uint16_t)1000) + (uint16_t)1); - } - - /* Write to I2Cx CCR */ - I2Cx->CCR = tmpreg; - /* Enable the selected I2C peripheral */ - I2Cx->CR1 |= I2C_CR1_PE; - -/*---------------------------- I2Cx CR1 Configuration ------------------------*/ - /* Get the I2Cx CR1 value */ - tmpreg = I2Cx->CR1; - /* Clear ACK, SMBTYPE and SMBUS bits */ - tmpreg &= CR1_CLEAR_MASK; - /* Configure I2Cx: mode and acknowledgement */ - /* Set SMBTYPE and SMBUS bits according to I2C_Mode value */ - /* Set ACK bit according to I2C_Ack value */ - tmpreg |= (uint16_t)((uint32_t)I2C_InitStruct->I2C_Mode | I2C_InitStruct->I2C_Ack); - /* Write to I2Cx CR1 */ - I2Cx->CR1 = tmpreg; - -/*---------------------------- I2Cx OAR1 Configuration -----------------------*/ - /* Set I2Cx Own Address1 and acknowledged address */ - I2Cx->OAR1 = (I2C_InitStruct->I2C_AcknowledgedAddress | I2C_InitStruct->I2C_OwnAddress1); -} - -/** - * @brief Fills each I2C_InitStruct member with its default value. - * @param I2C_InitStruct: pointer to an I2C_InitTypeDef structure which will be initialized. - * @retval None - */ -void I2C_StructInit(I2C_InitTypeDef* I2C_InitStruct) -{ -/*---------------- Reset I2C init structure parameters values ----------------*/ - /* initialize the I2C_ClockSpeed member */ - I2C_InitStruct->I2C_ClockSpeed = 5000; - /* Initialize the I2C_Mode member */ - I2C_InitStruct->I2C_Mode = I2C_Mode_I2C; - /* Initialize the I2C_DutyCycle member */ - I2C_InitStruct->I2C_DutyCycle = I2C_DutyCycle_2; - /* Initialize the I2C_OwnAddress1 member */ - I2C_InitStruct->I2C_OwnAddress1 = 0; - /* Initialize the I2C_Ack member */ - I2C_InitStruct->I2C_Ack = I2C_Ack_Disable; - /* Initialize the I2C_AcknowledgedAddress member */ - I2C_InitStruct->I2C_AcknowledgedAddress = I2C_AcknowledgedAddress_7bit; -} - -/** - * @brief Enables or disables the specified I2C peripheral. - * @param I2Cx: where x can be 1, 2 or 3 to select the I2C peripheral. - * @param NewState: new state of the I2Cx peripheral. - * This parameter can be: ENABLE or DISABLE. - * @retval None - */ -void I2C_Cmd(I2C_TypeDef* I2Cx, FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_I2C_ALL_PERIPH(I2Cx)); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - if (NewState != DISABLE) - { - /* Enable the selected I2C peripheral */ - I2Cx->CR1 |= I2C_CR1_PE; - } - else - { - /* Disable the selected I2C peripheral */ - I2Cx->CR1 &= (uint16_t)~((uint16_t)I2C_CR1_PE); - } -} - -/** - * @brief Enables or disables the Analog filter of I2C peripheral. - * - * @note This function can be used only for STM32F42xxx/STM3243xxx and STM32F401xx devices. - * - * @param I2Cx: where x can be 1, 2 or 3 to select the I2C peripheral. - * @param NewState: new state of the Analog filter. - * This parameter can be: ENABLE or DISABLE. - * @note This function should be called before initializing and enabling - the I2C Peripheral. - * @retval None - */ -void I2C_AnalogFilterCmd(I2C_TypeDef* I2Cx, FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_I2C_ALL_PERIPH(I2Cx)); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - if (NewState != DISABLE) - { - /* Enable the analog filter */ - I2Cx->FLTR &= (uint16_t)~((uint16_t)I2C_FLTR_ANOFF); - } - else - { - /* Disable the analog filter */ - I2Cx->FLTR |= I2C_FLTR_ANOFF; - } -} - -/** - * @brief Configures the Digital noise filter of I2C peripheral. - * - * @note This function can be used only for STM32F42xxx/STM3243xxx and STM32F401xx devices. - * - * @param I2Cx: where x can be 1, 2 or 3 to select the I2C peripheral. - * @param I2C_DigitalFilter: Coefficient of digital noise filter. - * This parameter can be a number between 0x00 and 0x0F. - * @note This function should be called before initializing and enabling - the I2C Peripheral. - * @retval None - */ -void I2C_DigitalFilterConfig(I2C_TypeDef* I2Cx, uint16_t I2C_DigitalFilter) -{ - uint16_t tmpreg = 0; - - /* Check the parameters */ - assert_param(IS_I2C_ALL_PERIPH(I2Cx)); - assert_param(IS_I2C_DIGITAL_FILTER(I2C_DigitalFilter)); - - /* Get the old register value */ - tmpreg = I2Cx->FLTR; - - /* Reset I2Cx DNF bit [3:0] */ - tmpreg &= (uint16_t)~((uint16_t)I2C_FLTR_DNF); - - /* Set I2Cx DNF coefficient */ - tmpreg |= (uint16_t)((uint16_t)I2C_DigitalFilter & I2C_FLTR_DNF); - - /* Store the new register value */ - I2Cx->FLTR = tmpreg; -} - -/** - * @brief Generates I2Cx communication START condition. - * @param I2Cx: where x can be 1, 2 or 3 to select the I2C peripheral. - * @param NewState: new state of the I2C START condition generation. - * This parameter can be: ENABLE or DISABLE. - * @retval None. - */ -void I2C_GenerateSTART(I2C_TypeDef* I2Cx, FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_I2C_ALL_PERIPH(I2Cx)); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - if (NewState != DISABLE) - { - /* Generate a START condition */ - I2Cx->CR1 |= I2C_CR1_START; - } - else - { - /* Disable the START condition generation */ - I2Cx->CR1 &= (uint16_t)~((uint16_t)I2C_CR1_START); - } -} - -/** - * @brief Generates I2Cx communication STOP condition. - * @param I2Cx: where x can be 1, 2 or 3 to select the I2C peripheral. - * @param NewState: new state of the I2C STOP condition generation. - * This parameter can be: ENABLE or DISABLE. - * @retval None. - */ -void I2C_GenerateSTOP(I2C_TypeDef* I2Cx, FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_I2C_ALL_PERIPH(I2Cx)); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - if (NewState != DISABLE) - { - /* Generate a STOP condition */ - I2Cx->CR1 |= I2C_CR1_STOP; - } - else - { - /* Disable the STOP condition generation */ - I2Cx->CR1 &= (uint16_t)~((uint16_t)I2C_CR1_STOP); - } -} - -/** - * @brief Transmits the address byte to select the slave device. - * @param I2Cx: where x can be 1, 2 or 3 to select the I2C peripheral. - * @param Address: specifies the slave address which will be transmitted - * @param I2C_Direction: specifies whether the I2C device will be a Transmitter - * or a Receiver. - * This parameter can be one of the following values - * @arg I2C_Direction_Transmitter: Transmitter mode - * @arg I2C_Direction_Receiver: Receiver mode - * @retval None. - */ -void I2C_Send7bitAddress(I2C_TypeDef* I2Cx, uint8_t Address, uint8_t I2C_Direction) -{ - /* Check the parameters */ - assert_param(IS_I2C_ALL_PERIPH(I2Cx)); - assert_param(IS_I2C_DIRECTION(I2C_Direction)); - /* Test on the direction to set/reset the read/write bit */ - if (I2C_Direction != I2C_Direction_Transmitter) - { - /* Set the address bit0 for read */ - Address |= I2C_OAR1_ADD0; - } - else - { - /* Reset the address bit0 for write */ - Address &= (uint8_t)~((uint8_t)I2C_OAR1_ADD0); - } - /* Send the address */ - I2Cx->DR = Address; -} - -/** - * @brief Enables or disables the specified I2C acknowledge feature. - * @param I2Cx: where x can be 1, 2 or 3 to select the I2C peripheral. - * @param NewState: new state of the I2C Acknowledgement. - * This parameter can be: ENABLE or DISABLE. - * @retval None. - */ -void I2C_AcknowledgeConfig(I2C_TypeDef* I2Cx, FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_I2C_ALL_PERIPH(I2Cx)); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - if (NewState != DISABLE) - { - /* Enable the acknowledgement */ - I2Cx->CR1 |= I2C_CR1_ACK; - } - else - { - /* Disable the acknowledgement */ - I2Cx->CR1 &= (uint16_t)~((uint16_t)I2C_CR1_ACK); - } -} - -/** - * @brief Configures the specified I2C own address2. - * @param I2Cx: where x can be 1, 2 or 3 to select the I2C peripheral. - * @param Address: specifies the 7bit I2C own address2. - * @retval None. - */ -void I2C_OwnAddress2Config(I2C_TypeDef* I2Cx, uint8_t Address) -{ - uint16_t tmpreg = 0; - - /* Check the parameters */ - assert_param(IS_I2C_ALL_PERIPH(I2Cx)); - - /* Get the old register value */ - tmpreg = I2Cx->OAR2; - - /* Reset I2Cx Own address2 bit [7:1] */ - tmpreg &= (uint16_t)~((uint16_t)I2C_OAR2_ADD2); - - /* Set I2Cx Own address2 */ - tmpreg |= (uint16_t)((uint16_t)Address & (uint16_t)0x00FE); - - /* Store the new register value */ - I2Cx->OAR2 = tmpreg; -} - -/** - * @brief Enables or disables the specified I2C dual addressing mode. - * @param I2Cx: where x can be 1, 2 or 3 to select the I2C peripheral. - * @param NewState: new state of the I2C dual addressing mode. - * This parameter can be: ENABLE or DISABLE. - * @retval None - */ -void I2C_DualAddressCmd(I2C_TypeDef* I2Cx, FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_I2C_ALL_PERIPH(I2Cx)); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - if (NewState != DISABLE) - { - /* Enable dual addressing mode */ - I2Cx->OAR2 |= I2C_OAR2_ENDUAL; - } - else - { - /* Disable dual addressing mode */ - I2Cx->OAR2 &= (uint16_t)~((uint16_t)I2C_OAR2_ENDUAL); - } -} - -/** - * @brief Enables or disables the specified I2C general call feature. - * @param I2Cx: where x can be 1, 2 or 3 to select the I2C peripheral. - * @param NewState: new state of the I2C General call. - * This parameter can be: ENABLE or DISABLE. - * @retval None - */ -void I2C_GeneralCallCmd(I2C_TypeDef* I2Cx, FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_I2C_ALL_PERIPH(I2Cx)); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - if (NewState != DISABLE) - { - /* Enable generall call */ - I2Cx->CR1 |= I2C_CR1_ENGC; - } - else - { - /* Disable generall call */ - I2Cx->CR1 &= (uint16_t)~((uint16_t)I2C_CR1_ENGC); - } -} - -/** - * @brief Enables or disables the specified I2C software reset. - * @note When software reset is enabled, the I2C IOs are released (this can - * be useful to recover from bus errors). - * @param I2Cx: where x can be 1, 2 or 3 to select the I2C peripheral. - * @param NewState: new state of the I2C software reset. - * This parameter can be: ENABLE or DISABLE. - * @retval None - */ -void I2C_SoftwareResetCmd(I2C_TypeDef* I2Cx, FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_I2C_ALL_PERIPH(I2Cx)); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - if (NewState != DISABLE) - { - /* Peripheral under reset */ - I2Cx->CR1 |= I2C_CR1_SWRST; - } - else - { - /* Peripheral not under reset */ - I2Cx->CR1 &= (uint16_t)~((uint16_t)I2C_CR1_SWRST); - } -} - -/** - * @brief Enables or disables the specified I2C Clock stretching. - * @param I2Cx: where x can be 1, 2 or 3 to select the I2C peripheral. - * @param NewState: new state of the I2Cx Clock stretching. - * This parameter can be: ENABLE or DISABLE. - * @retval None - */ -void I2C_StretchClockCmd(I2C_TypeDef* I2Cx, FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_I2C_ALL_PERIPH(I2Cx)); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - if (NewState == DISABLE) - { - /* Enable the selected I2C Clock stretching */ - I2Cx->CR1 |= I2C_CR1_NOSTRETCH; - } - else - { - /* Disable the selected I2C Clock stretching */ - I2Cx->CR1 &= (uint16_t)~((uint16_t)I2C_CR1_NOSTRETCH); - } -} - -/** - * @brief Selects the specified I2C fast mode duty cycle. - * @param I2Cx: where x can be 1, 2 or 3 to select the I2C peripheral. - * @param I2C_DutyCycle: specifies the fast mode duty cycle. - * This parameter can be one of the following values: - * @arg I2C_DutyCycle_2: I2C fast mode Tlow/Thigh = 2 - * @arg I2C_DutyCycle_16_9: I2C fast mode Tlow/Thigh = 16/9 - * @retval None - */ -void I2C_FastModeDutyCycleConfig(I2C_TypeDef* I2Cx, uint16_t I2C_DutyCycle) -{ - /* Check the parameters */ - assert_param(IS_I2C_ALL_PERIPH(I2Cx)); - assert_param(IS_I2C_DUTY_CYCLE(I2C_DutyCycle)); - if (I2C_DutyCycle != I2C_DutyCycle_16_9) - { - /* I2C fast mode Tlow/Thigh=2 */ - I2Cx->CCR &= I2C_DutyCycle_2; - } - else - { - /* I2C fast mode Tlow/Thigh=16/9 */ - I2Cx->CCR |= I2C_DutyCycle_16_9; - } -} - -/** - * @brief Selects the specified I2C NACK position in master receiver mode. - * @note This function is useful in I2C Master Receiver mode when the number - * of data to be received is equal to 2. In this case, this function - * should be called (with parameter I2C_NACKPosition_Next) before data - * reception starts,as described in the 2-byte reception procedure - * recommended in Reference Manual in Section: Master receiver. - * @param I2Cx: where x can be 1, 2 or 3 to select the I2C peripheral. - * @param I2C_NACKPosition: specifies the NACK position. - * This parameter can be one of the following values: - * @arg I2C_NACKPosition_Next: indicates that the next byte will be the last - * received byte. - * @arg I2C_NACKPosition_Current: indicates that current byte is the last - * received byte. - * - * @note This function configures the same bit (POS) as I2C_PECPositionConfig() - * but is intended to be used in I2C mode while I2C_PECPositionConfig() - * is intended to used in SMBUS mode. - * - * @retval None - */ -void I2C_NACKPositionConfig(I2C_TypeDef* I2Cx, uint16_t I2C_NACKPosition) -{ - /* Check the parameters */ - assert_param(IS_I2C_ALL_PERIPH(I2Cx)); - assert_param(IS_I2C_NACK_POSITION(I2C_NACKPosition)); - - /* Check the input parameter */ - if (I2C_NACKPosition == I2C_NACKPosition_Next) - { - /* Next byte in shift register is the last received byte */ - I2Cx->CR1 |= I2C_NACKPosition_Next; - } - else - { - /* Current byte in shift register is the last received byte */ - I2Cx->CR1 &= I2C_NACKPosition_Current; - } -} - -/** - * @brief Drives the SMBusAlert pin high or low for the specified I2C. - * @param I2Cx: where x can be 1, 2 or 3 to select the I2C peripheral. - * @param I2C_SMBusAlert: specifies SMBAlert pin level. - * This parameter can be one of the following values: - * @arg I2C_SMBusAlert_Low: SMBAlert pin driven low - * @arg I2C_SMBusAlert_High: SMBAlert pin driven high - * @retval None - */ -void I2C_SMBusAlertConfig(I2C_TypeDef* I2Cx, uint16_t I2C_SMBusAlert) -{ - /* Check the parameters */ - assert_param(IS_I2C_ALL_PERIPH(I2Cx)); - assert_param(IS_I2C_SMBUS_ALERT(I2C_SMBusAlert)); - if (I2C_SMBusAlert == I2C_SMBusAlert_Low) - { - /* Drive the SMBusAlert pin Low */ - I2Cx->CR1 |= I2C_SMBusAlert_Low; - } - else - { - /* Drive the SMBusAlert pin High */ - I2Cx->CR1 &= I2C_SMBusAlert_High; - } -} - -/** - * @brief Enables or disables the specified I2C ARP. - * @param I2Cx: where x can be 1, 2 or 3 to select the I2C peripheral. - * @param NewState: new state of the I2Cx ARP. - * This parameter can be: ENABLE or DISABLE. - * @retval None - */ -void I2C_ARPCmd(I2C_TypeDef* I2Cx, FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_I2C_ALL_PERIPH(I2Cx)); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - if (NewState != DISABLE) - { - /* Enable the selected I2C ARP */ - I2Cx->CR1 |= I2C_CR1_ENARP; - } - else - { - /* Disable the selected I2C ARP */ - I2Cx->CR1 &= (uint16_t)~((uint16_t)I2C_CR1_ENARP); - } -} -/** - * @} - */ - -/** @defgroup I2C_Group2 Data transfers functions - * @brief Data transfers functions - * -@verbatim - =============================================================================== - ##### Data transfers functions ##### - =============================================================================== - -@endverbatim - * @{ - */ - -/** - * @brief Sends a data byte through the I2Cx peripheral. - * @param I2Cx: where x can be 1, 2 or 3 to select the I2C peripheral. - * @param Data: Byte to be transmitted.. - * @retval None - */ -void I2C_SendData(I2C_TypeDef* I2Cx, uint8_t Data) -{ - /* Check the parameters */ - assert_param(IS_I2C_ALL_PERIPH(I2Cx)); - /* Write in the DR register the data to be sent */ - I2Cx->DR = Data; -} - -/** - * @brief Returns the most recent received data by the I2Cx peripheral. - * @param I2Cx: where x can be 1, 2 or 3 to select the I2C peripheral. - * @retval The value of the received data. - */ -uint8_t I2C_ReceiveData(I2C_TypeDef* I2Cx) -{ - /* Check the parameters */ - assert_param(IS_I2C_ALL_PERIPH(I2Cx)); - /* Return the data in the DR register */ - return (uint8_t)I2Cx->DR; -} - -/** - * @} - */ - -/** @defgroup I2C_Group3 PEC management functions - * @brief PEC management functions - * -@verbatim - =============================================================================== - ##### PEC management functions ##### - =============================================================================== - -@endverbatim - * @{ - */ - -/** - * @brief Enables or disables the specified I2C PEC transfer. - * @param I2Cx: where x can be 1, 2 or 3 to select the I2C peripheral. - * @param NewState: new state of the I2C PEC transmission. - * This parameter can be: ENABLE or DISABLE. - * @retval None - */ -void I2C_TransmitPEC(I2C_TypeDef* I2Cx, FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_I2C_ALL_PERIPH(I2Cx)); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - if (NewState != DISABLE) - { - /* Enable the selected I2C PEC transmission */ - I2Cx->CR1 |= I2C_CR1_PEC; - } - else - { - /* Disable the selected I2C PEC transmission */ - I2Cx->CR1 &= (uint16_t)~((uint16_t)I2C_CR1_PEC); - } -} - -/** - * @brief Selects the specified I2C PEC position. - * @param I2Cx: where x can be 1, 2 or 3 to select the I2C peripheral. - * @param I2C_PECPosition: specifies the PEC position. - * This parameter can be one of the following values: - * @arg I2C_PECPosition_Next: indicates that the next byte is PEC - * @arg I2C_PECPosition_Current: indicates that current byte is PEC - * - * @note This function configures the same bit (POS) as I2C_NACKPositionConfig() - * but is intended to be used in SMBUS mode while I2C_NACKPositionConfig() - * is intended to used in I2C mode. - * - * @retval None - */ -void I2C_PECPositionConfig(I2C_TypeDef* I2Cx, uint16_t I2C_PECPosition) -{ - /* Check the parameters */ - assert_param(IS_I2C_ALL_PERIPH(I2Cx)); - assert_param(IS_I2C_PEC_POSITION(I2C_PECPosition)); - if (I2C_PECPosition == I2C_PECPosition_Next) - { - /* Next byte in shift register is PEC */ - I2Cx->CR1 |= I2C_PECPosition_Next; - } - else - { - /* Current byte in shift register is PEC */ - I2Cx->CR1 &= I2C_PECPosition_Current; - } -} - -/** - * @brief Enables or disables the PEC value calculation of the transferred bytes. - * @param I2Cx: where x can be 1, 2 or 3 to select the I2C peripheral. - * @param NewState: new state of the I2Cx PEC value calculation. - * This parameter can be: ENABLE or DISABLE. - * @retval None - */ -void I2C_CalculatePEC(I2C_TypeDef* I2Cx, FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_I2C_ALL_PERIPH(I2Cx)); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - if (NewState != DISABLE) - { - /* Enable the selected I2C PEC calculation */ - I2Cx->CR1 |= I2C_CR1_ENPEC; - } - else - { - /* Disable the selected I2C PEC calculation */ - I2Cx->CR1 &= (uint16_t)~((uint16_t)I2C_CR1_ENPEC); - } -} - -/** - * @brief Returns the PEC value for the specified I2C. - * @param I2Cx: where x can be 1, 2 or 3 to select the I2C peripheral. - * @retval The PEC value. - */ -uint8_t I2C_GetPEC(I2C_TypeDef* I2Cx) -{ - /* Check the parameters */ - assert_param(IS_I2C_ALL_PERIPH(I2Cx)); - /* Return the selected I2C PEC value */ - return ((I2Cx->SR2) >> 8); -} - -/** - * @} - */ - -/** @defgroup I2C_Group4 DMA transfers management functions - * @brief DMA transfers management functions - * -@verbatim - =============================================================================== - ##### DMA transfers management functions ##### - =============================================================================== - This section provides functions allowing to configure the I2C DMA channels - requests. - -@endverbatim - * @{ - */ - -/** - * @brief Enables or disables the specified I2C DMA requests. - * @param I2Cx: where x can be 1, 2 or 3 to select the I2C peripheral. - * @param NewState: new state of the I2C DMA transfer. - * This parameter can be: ENABLE or DISABLE. - * @retval None - */ -void I2C_DMACmd(I2C_TypeDef* I2Cx, FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_I2C_ALL_PERIPH(I2Cx)); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - if (NewState != DISABLE) - { - /* Enable the selected I2C DMA requests */ - I2Cx->CR2 |= I2C_CR2_DMAEN; - } - else - { - /* Disable the selected I2C DMA requests */ - I2Cx->CR2 &= (uint16_t)~((uint16_t)I2C_CR2_DMAEN); - } -} - -/** - * @brief Specifies that the next DMA transfer is the last one. - * @param I2Cx: where x can be 1, 2 or 3 to select the I2C peripheral. - * @param NewState: new state of the I2C DMA last transfer. - * This parameter can be: ENABLE or DISABLE. - * @retval None - */ -void I2C_DMALastTransferCmd(I2C_TypeDef* I2Cx, FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_I2C_ALL_PERIPH(I2Cx)); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - if (NewState != DISABLE) - { - /* Next DMA transfer is the last transfer */ - I2Cx->CR2 |= I2C_CR2_LAST; - } - else - { - /* Next DMA transfer is not the last transfer */ - I2Cx->CR2 &= (uint16_t)~((uint16_t)I2C_CR2_LAST); - } -} - -/** - * @} - */ - -/** @defgroup I2C_Group5 Interrupts events and flags management functions - * @brief Interrupts, events and flags management functions - * -@verbatim - =============================================================================== - ##### Interrupts, events and flags management functions ##### - =============================================================================== - [..] - This section provides functions allowing to configure the I2C Interrupts - sources and check or clear the flags or pending bits status. - The user should identify which mode will be used in his application to manage - the communication: Polling mode, Interrupt mode or DMA mode. - - - ##### I2C State Monitoring Functions ##### - =============================================================================== - [..] - This I2C driver provides three different ways for I2C state monitoring - depending on the application requirements and constraints: - - - (#) Basic state monitoring (Using I2C_CheckEvent() function) - - It compares the status registers (SR1 and SR2) content to a given event - (can be the combination of one or more flags). - It returns SUCCESS if the current status includes the given flags - and returns ERROR if one or more flags are missing in the current status. - - (++) When to use - (+++) This function is suitable for most applications as well as for startup - activity since the events are fully described in the product reference - manual (RM0090). - (+++) It is also suitable for users who need to define their own events. - - (++) Limitations - If an error occurs (ie. error flags are set besides to the monitored - flags), the I2C_CheckEvent() function may return SUCCESS despite - the communication hold or corrupted real state. - In this case, it is advised to use error interrupts to monitor - the error events and handle them in the interrupt IRQ handler. - - -@@- For error management, it is advised to use the following functions: - (+@@) I2C_ITConfig() to configure and enable the error interrupts (I2C_IT_ERR). - (+@@) I2Cx_ER_IRQHandler() which is called when the error interrupt occurs. - Where x is the peripheral instance (I2C1, I2C2 ...) - (+@@) I2C_GetFlagStatus() or I2C_GetITStatus() to be called into the - I2Cx_ER_IRQHandler() function in order to determine which error occurred. - (+@@) I2C_ClearFlag() or I2C_ClearITPendingBit() and/or I2C_SoftwareResetCmd() - and/or I2C_GenerateStop() in order to clear the error flag and source - and return to correct communication status. - - - (#) Advanced state monitoring (Using the function I2C_GetLastEvent()) - - Using the function I2C_GetLastEvent() which returns the image of both status - registers in a single word (uint32_t) (Status Register 2 value is shifted left - by 16 bits and concatenated to Status Register 1). - - (++) When to use - (+++) This function is suitable for the same applications above but it - allows to overcome the mentioned limitation of I2C_GetFlagStatus() - function. - (+++) The returned value could be compared to events already defined in - the library (stm32f4xx_i2c.h) or to custom values defined by user. - This function is suitable when multiple flags are monitored at the - same time. - (+++) At the opposite of I2C_CheckEvent() function, this function allows - user to choose when an event is accepted (when all events flags are - set and no other flags are set or just when the needed flags are set - like I2C_CheckEvent() function. - - (++) Limitations - (+++) User may need to define his own events. - (+++) Same remark concerning the error management is applicable for this - function if user decides to check only regular communication flags - (and ignores error flags). - - - (#) Flag-based state monitoring (Using the function I2C_GetFlagStatus()) - - Using the function I2C_GetFlagStatus() which simply returns the status of - one single flag (ie. I2C_FLAG_RXNE ...). - - (++) When to use - (+++) This function could be used for specific applications or in debug - phase. - (+++) It is suitable when only one flag checking is needed (most I2C - events are monitored through multiple flags). - (++) Limitations: - (+++) When calling this function, the Status register is accessed. - Some flags are cleared when the status register is accessed. - So checking the status of one Flag, may clear other ones. - (+++) Function may need to be called twice or more in order to monitor - one single event. - - For detailed description of Events, please refer to section I2C_Events in - stm32f4xx_i2c.h file. - -@endverbatim - * @{ - */ - -/** - * @brief Reads the specified I2C register and returns its value. - * @param I2C_Register: specifies the register to read. - * This parameter can be one of the following values: - * @arg I2C_Register_CR1: CR1 register. - * @arg I2C_Register_CR2: CR2 register. - * @arg I2C_Register_OAR1: OAR1 register. - * @arg I2C_Register_OAR2: OAR2 register. - * @arg I2C_Register_DR: DR register. - * @arg I2C_Register_SR1: SR1 register. - * @arg I2C_Register_SR2: SR2 register. - * @arg I2C_Register_CCR: CCR register. - * @arg I2C_Register_TRISE: TRISE register. - * @retval The value of the read register. - */ -uint16_t I2C_ReadRegister(I2C_TypeDef* I2Cx, uint8_t I2C_Register) -{ - __IO uint32_t tmp = 0; - - /* Check the parameters */ - assert_param(IS_I2C_ALL_PERIPH(I2Cx)); - assert_param(IS_I2C_REGISTER(I2C_Register)); - - tmp = (uint32_t) I2Cx; - tmp += I2C_Register; - - /* Return the selected register value */ - return (*(__IO uint16_t *) tmp); -} - -/** - * @brief Enables or disables the specified I2C interrupts. - * @param I2Cx: where x can be 1, 2 or 3 to select the I2C peripheral. - * @param I2C_IT: specifies the I2C interrupts sources to be enabled or disabled. - * This parameter can be any combination of the following values: - * @arg I2C_IT_BUF: Buffer interrupt mask - * @arg I2C_IT_EVT: Event interrupt mask - * @arg I2C_IT_ERR: Error interrupt mask - * @param NewState: new state of the specified I2C interrupts. - * This parameter can be: ENABLE or DISABLE. - * @retval None - */ -void I2C_ITConfig(I2C_TypeDef* I2Cx, uint16_t I2C_IT, FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_I2C_ALL_PERIPH(I2Cx)); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - assert_param(IS_I2C_CONFIG_IT(I2C_IT)); - - if (NewState != DISABLE) - { - /* Enable the selected I2C interrupts */ - I2Cx->CR2 |= I2C_IT; - } - else - { - /* Disable the selected I2C interrupts */ - I2Cx->CR2 &= (uint16_t)~I2C_IT; - } -} - -/* - =============================================================================== - 1. Basic state monitoring - =============================================================================== - */ - -/** - * @brief Checks whether the last I2Cx Event is equal to the one passed - * as parameter. - * @param I2Cx: where x can be 1, 2 or 3 to select the I2C peripheral. - * @param I2C_EVENT: specifies the event to be checked. - * This parameter can be one of the following values: - * @arg I2C_EVENT_SLAVE_TRANSMITTER_ADDRESS_MATCHED: EV1 - * @arg I2C_EVENT_SLAVE_RECEIVER_ADDRESS_MATCHED: EV1 - * @arg I2C_EVENT_SLAVE_TRANSMITTER_SECONDADDRESS_MATCHED: EV1 - * @arg I2C_EVENT_SLAVE_RECEIVER_SECONDADDRESS_MATCHED: EV1 - * @arg I2C_EVENT_SLAVE_GENERALCALLADDRESS_MATCHED: EV1 - * @arg I2C_EVENT_SLAVE_BYTE_RECEIVED: EV2 - * @arg (I2C_EVENT_SLAVE_BYTE_RECEIVED | I2C_FLAG_DUALF): EV2 - * @arg (I2C_EVENT_SLAVE_BYTE_RECEIVED | I2C_FLAG_GENCALL): EV2 - * @arg I2C_EVENT_SLAVE_BYTE_TRANSMITTED: EV3 - * @arg (I2C_EVENT_SLAVE_BYTE_TRANSMITTED | I2C_FLAG_DUALF): EV3 - * @arg (I2C_EVENT_SLAVE_BYTE_TRANSMITTED | I2C_FLAG_GENCALL): EV3 - * @arg I2C_EVENT_SLAVE_ACK_FAILURE: EV3_2 - * @arg I2C_EVENT_SLAVE_STOP_DETECTED: EV4 - * @arg I2C_EVENT_MASTER_MODE_SELECT: EV5 - * @arg I2C_EVENT_MASTER_TRANSMITTER_MODE_SELECTED: EV6 - * @arg I2C_EVENT_MASTER_RECEIVER_MODE_SELECTED: EV6 - * @arg I2C_EVENT_MASTER_BYTE_RECEIVED: EV7 - * @arg I2C_EVENT_MASTER_BYTE_TRANSMITTING: EV8 - * @arg I2C_EVENT_MASTER_BYTE_TRANSMITTED: EV8_2 - * @arg I2C_EVENT_MASTER_MODE_ADDRESS10: EV9 - * - * @note For detailed description of Events, please refer to section I2C_Events - * in stm32f4xx_i2c.h file. - * - * @retval An ErrorStatus enumeration value: - * - SUCCESS: Last event is equal to the I2C_EVENT - * - ERROR: Last event is different from the I2C_EVENT - */ -ErrorStatus I2C_CheckEvent(I2C_TypeDef* I2Cx, uint32_t I2C_EVENT) -{ - uint32_t lastevent = 0; - uint32_t flag1 = 0, flag2 = 0; - ErrorStatus status = ERROR; - - /* Check the parameters */ - assert_param(IS_I2C_ALL_PERIPH(I2Cx)); - assert_param(IS_I2C_EVENT(I2C_EVENT)); - - /* Read the I2Cx status register */ - flag1 = I2Cx->SR1; - flag2 = I2Cx->SR2; - flag2 = flag2 << 16; - - /* Get the last event value from I2C status register */ - lastevent = (flag1 | flag2) & FLAG_MASK; - - /* Check whether the last event contains the I2C_EVENT */ - if ((lastevent & I2C_EVENT) == I2C_EVENT) - { - /* SUCCESS: last event is equal to I2C_EVENT */ - status = SUCCESS; - } - else - { - /* ERROR: last event is different from I2C_EVENT */ - status = ERROR; - } - /* Return status */ - return status; -} - -/* - =============================================================================== - 2. Advanced state monitoring - =============================================================================== - */ - -/** - * @brief Returns the last I2Cx Event. - * @param I2Cx: where x can be 1, 2 or 3 to select the I2C peripheral. - * - * @note For detailed description of Events, please refer to section I2C_Events - * in stm32f4xx_i2c.h file. - * - * @retval The last event - */ -uint32_t I2C_GetLastEvent(I2C_TypeDef* I2Cx) -{ - uint32_t lastevent = 0; - uint32_t flag1 = 0, flag2 = 0; - - /* Check the parameters */ - assert_param(IS_I2C_ALL_PERIPH(I2Cx)); - - /* Read the I2Cx status register */ - flag1 = I2Cx->SR1; - flag2 = I2Cx->SR2; - flag2 = flag2 << 16; - - /* Get the last event value from I2C status register */ - lastevent = (flag1 | flag2) & FLAG_MASK; - - /* Return status */ - return lastevent; -} - -/* - =============================================================================== - 3. Flag-based state monitoring - =============================================================================== - */ - -/** - * @brief Checks whether the specified I2C flag is set or not. - * @param I2Cx: where x can be 1, 2 or 3 to select the I2C peripheral. - * @param I2C_FLAG: specifies the flag to check. - * This parameter can be one of the following values: - * @arg I2C_FLAG_DUALF: Dual flag (Slave mode) - * @arg I2C_FLAG_SMBHOST: SMBus host header (Slave mode) - * @arg I2C_FLAG_SMBDEFAULT: SMBus default header (Slave mode) - * @arg I2C_FLAG_GENCALL: General call header flag (Slave mode) - * @arg I2C_FLAG_TRA: Transmitter/Receiver flag - * @arg I2C_FLAG_BUSY: Bus busy flag - * @arg I2C_FLAG_MSL: Master/Slave flag - * @arg I2C_FLAG_SMBALERT: SMBus Alert flag - * @arg I2C_FLAG_TIMEOUT: Timeout or Tlow error flag - * @arg I2C_FLAG_PECERR: PEC error in reception flag - * @arg I2C_FLAG_OVR: Overrun/Underrun flag (Slave mode) - * @arg I2C_FLAG_AF: Acknowledge failure flag - * @arg I2C_FLAG_ARLO: Arbitration lost flag (Master mode) - * @arg I2C_FLAG_BERR: Bus error flag - * @arg I2C_FLAG_TXE: Data register empty flag (Transmitter) - * @arg I2C_FLAG_RXNE: Data register not empty (Receiver) flag - * @arg I2C_FLAG_STOPF: Stop detection flag (Slave mode) - * @arg I2C_FLAG_ADD10: 10-bit header sent flag (Master mode) - * @arg I2C_FLAG_BTF: Byte transfer finished flag - * @arg I2C_FLAG_ADDR: Address sent flag (Master mode) "ADSL" - * Address matched flag (Slave mode)"ENDAD" - * @arg I2C_FLAG_SB: Start bit flag (Master mode) - * @retval The new state of I2C_FLAG (SET or RESET). - */ -FlagStatus I2C_GetFlagStatus(I2C_TypeDef* I2Cx, uint32_t I2C_FLAG) -{ - FlagStatus bitstatus = RESET; - __IO uint32_t i2creg = 0, i2cxbase = 0; - - /* Check the parameters */ - assert_param(IS_I2C_ALL_PERIPH(I2Cx)); - assert_param(IS_I2C_GET_FLAG(I2C_FLAG)); - - /* Get the I2Cx peripheral base address */ - i2cxbase = (uint32_t)I2Cx; - - /* Read flag register index */ - i2creg = I2C_FLAG >> 28; - - /* Get bit[23:0] of the flag */ - I2C_FLAG &= FLAG_MASK; - - if(i2creg != 0) - { - /* Get the I2Cx SR1 register address */ - i2cxbase += 0x14; - } - else - { - /* Flag in I2Cx SR2 Register */ - I2C_FLAG = (uint32_t)(I2C_FLAG >> 16); - /* Get the I2Cx SR2 register address */ - i2cxbase += 0x18; - } - - if(((*(__IO uint32_t *)i2cxbase) & I2C_FLAG) != (uint32_t)RESET) - { - /* I2C_FLAG is set */ - bitstatus = SET; - } - else - { - /* I2C_FLAG is reset */ - bitstatus = RESET; - } - - /* Return the I2C_FLAG status */ - return bitstatus; -} - -/** - * @brief Clears the I2Cx's pending flags. - * @param I2Cx: where x can be 1, 2 or 3 to select the I2C peripheral. - * @param I2C_FLAG: specifies the flag to clear. - * This parameter can be any combination of the following values: - * @arg I2C_FLAG_SMBALERT: SMBus Alert flag - * @arg I2C_FLAG_TIMEOUT: Timeout or Tlow error flag - * @arg I2C_FLAG_PECERR: PEC error in reception flag - * @arg I2C_FLAG_OVR: Overrun/Underrun flag (Slave mode) - * @arg I2C_FLAG_AF: Acknowledge failure flag - * @arg I2C_FLAG_ARLO: Arbitration lost flag (Master mode) - * @arg I2C_FLAG_BERR: Bus error flag - * - * @note STOPF (STOP detection) is cleared by software sequence: a read operation - * to I2C_SR1 register (I2C_GetFlagStatus()) followed by a write operation - * to I2C_CR1 register (I2C_Cmd() to re-enable the I2C peripheral). - * @note ADD10 (10-bit header sent) is cleared by software sequence: a read - * operation to I2C_SR1 (I2C_GetFlagStatus()) followed by writing the - * second byte of the address in DR register. - * @note BTF (Byte Transfer Finished) is cleared by software sequence: a read - * operation to I2C_SR1 register (I2C_GetFlagStatus()) followed by a - * read/write to I2C_DR register (I2C_SendData()). - * @note ADDR (Address sent) is cleared by software sequence: a read operation to - * I2C_SR1 register (I2C_GetFlagStatus()) followed by a read operation to - * I2C_SR2 register ((void)(I2Cx->SR2)). - * @note SB (Start Bit) is cleared software sequence: a read operation to I2C_SR1 - * register (I2C_GetFlagStatus()) followed by a write operation to I2C_DR - * register (I2C_SendData()). - * - * @retval None - */ -void I2C_ClearFlag(I2C_TypeDef* I2Cx, uint32_t I2C_FLAG) -{ - uint32_t flagpos = 0; - /* Check the parameters */ - assert_param(IS_I2C_ALL_PERIPH(I2Cx)); - assert_param(IS_I2C_CLEAR_FLAG(I2C_FLAG)); - /* Get the I2C flag position */ - flagpos = I2C_FLAG & FLAG_MASK; - /* Clear the selected I2C flag */ - I2Cx->SR1 = (uint16_t)~flagpos; -} - -/** - * @brief Checks whether the specified I2C interrupt has occurred or not. - * @param I2Cx: where x can be 1, 2 or 3 to select the I2C peripheral. - * @param I2C_IT: specifies the interrupt source to check. - * This parameter can be one of the following values: - * @arg I2C_IT_SMBALERT: SMBus Alert flag - * @arg I2C_IT_TIMEOUT: Timeout or Tlow error flag - * @arg I2C_IT_PECERR: PEC error in reception flag - * @arg I2C_IT_OVR: Overrun/Underrun flag (Slave mode) - * @arg I2C_IT_AF: Acknowledge failure flag - * @arg I2C_IT_ARLO: Arbitration lost flag (Master mode) - * @arg I2C_IT_BERR: Bus error flag - * @arg I2C_IT_TXE: Data register empty flag (Transmitter) - * @arg I2C_IT_RXNE: Data register not empty (Receiver) flag - * @arg I2C_IT_STOPF: Stop detection flag (Slave mode) - * @arg I2C_IT_ADD10: 10-bit header sent flag (Master mode) - * @arg I2C_IT_BTF: Byte transfer finished flag - * @arg I2C_IT_ADDR: Address sent flag (Master mode) "ADSL" - * Address matched flag (Slave mode)"ENDAD" - * @arg I2C_IT_SB: Start bit flag (Master mode) - * @retval The new state of I2C_IT (SET or RESET). - */ -ITStatus I2C_GetITStatus(I2C_TypeDef* I2Cx, uint32_t I2C_IT) -{ - ITStatus bitstatus = RESET; - uint32_t enablestatus = 0; - - /* Check the parameters */ - assert_param(IS_I2C_ALL_PERIPH(I2Cx)); - assert_param(IS_I2C_GET_IT(I2C_IT)); - - /* Check if the interrupt source is enabled or not */ - enablestatus = (uint32_t)(((I2C_IT & ITEN_MASK) >> 16) & (I2Cx->CR2)) ; - - /* Get bit[23:0] of the flag */ - I2C_IT &= FLAG_MASK; - - /* Check the status of the specified I2C flag */ - if (((I2Cx->SR1 & I2C_IT) != (uint32_t)RESET) && enablestatus) - { - /* I2C_IT is set */ - bitstatus = SET; - } - else - { - /* I2C_IT is reset */ - bitstatus = RESET; - } - /* Return the I2C_IT status */ - return bitstatus; -} - -/** - * @brief Clears the I2Cx's interrupt pending bits. - * @param I2Cx: where x can be 1, 2 or 3 to select the I2C peripheral. - * @param I2C_IT: specifies the interrupt pending bit to clear. - * This parameter can be any combination of the following values: - * @arg I2C_IT_SMBALERT: SMBus Alert interrupt - * @arg I2C_IT_TIMEOUT: Timeout or Tlow error interrupt - * @arg I2C_IT_PECERR: PEC error in reception interrupt - * @arg I2C_IT_OVR: Overrun/Underrun interrupt (Slave mode) - * @arg I2C_IT_AF: Acknowledge failure interrupt - * @arg I2C_IT_ARLO: Arbitration lost interrupt (Master mode) - * @arg I2C_IT_BERR: Bus error interrupt - * - * @note STOPF (STOP detection) is cleared by software sequence: a read operation - * to I2C_SR1 register (I2C_GetITStatus()) followed by a write operation to - * I2C_CR1 register (I2C_Cmd() to re-enable the I2C peripheral). - * @note ADD10 (10-bit header sent) is cleared by software sequence: a read - * operation to I2C_SR1 (I2C_GetITStatus()) followed by writing the second - * byte of the address in I2C_DR register. - * @note BTF (Byte Transfer Finished) is cleared by software sequence: a read - * operation to I2C_SR1 register (I2C_GetITStatus()) followed by a - * read/write to I2C_DR register (I2C_SendData()). - * @note ADDR (Address sent) is cleared by software sequence: a read operation to - * I2C_SR1 register (I2C_GetITStatus()) followed by a read operation to - * I2C_SR2 register ((void)(I2Cx->SR2)). - * @note SB (Start Bit) is cleared by software sequence: a read operation to - * I2C_SR1 register (I2C_GetITStatus()) followed by a write operation to - * I2C_DR register (I2C_SendData()). - * @retval None - */ -void I2C_ClearITPendingBit(I2C_TypeDef* I2Cx, uint32_t I2C_IT) -{ - uint32_t flagpos = 0; - /* Check the parameters */ - assert_param(IS_I2C_ALL_PERIPH(I2Cx)); - assert_param(IS_I2C_CLEAR_IT(I2C_IT)); - - /* Get the I2C flag position */ - flagpos = I2C_IT & FLAG_MASK; - - /* Clear the selected I2C flag */ - I2Cx->SR1 = (uint16_t)~flagpos; -} - -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/stm/lib/stm32f4xx_i2c.h b/stm/lib/stm32f4xx_i2c.h deleted file mode 100644 index 87ca21284..000000000 --- a/stm/lib/stm32f4xx_i2c.h +++ /dev/null @@ -1,711 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f4xx_i2c.h - * @author MCD Application Team - * @version V1.3.0 - * @date 08-November-2013 - * @brief This file contains all the functions prototypes for the I2C firmware - * library. - ****************************************************************************** - * @attention - * - *

© COPYRIGHT 2013 STMicroelectronics

- * - * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License"); - * You may not use this file except in compliance with the License. - * You may obtain a copy of the License at: - * - * http://www.st.com/software_license_agreement_liberty_v2 - * - * Unless required by applicable law or agreed to in writing, software - * distributed under the License is distributed on an "AS IS" BASIS, - * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - * See the License for the specific language governing permissions and - * limitations under the License. - * - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F4xx_I2C_H -#define __STM32F4xx_I2C_H - -#ifdef __cplusplus - extern "C" { -#endif - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx.h" - -/** @addtogroup STM32F4xx_StdPeriph_Driver - * @{ - */ - -/** @addtogroup I2C - * @{ - */ - -/* Exported types ------------------------------------------------------------*/ - -/** - * @brief I2C Init structure definition - */ - -typedef struct -{ - uint32_t I2C_ClockSpeed; /*!< Specifies the clock frequency. - This parameter must be set to a value lower than 400kHz */ - - uint16_t I2C_Mode; /*!< Specifies the I2C mode. - This parameter can be a value of @ref I2C_mode */ - - uint16_t I2C_DutyCycle; /*!< Specifies the I2C fast mode duty cycle. - This parameter can be a value of @ref I2C_duty_cycle_in_fast_mode */ - - uint16_t I2C_OwnAddress1; /*!< Specifies the first device own address. - This parameter can be a 7-bit or 10-bit address. */ - - uint16_t I2C_Ack; /*!< Enables or disables the acknowledgement. - This parameter can be a value of @ref I2C_acknowledgement */ - - uint16_t I2C_AcknowledgedAddress; /*!< Specifies if 7-bit or 10-bit address is acknowledged. - This parameter can be a value of @ref I2C_acknowledged_address */ -}I2C_InitTypeDef; - -/* Exported constants --------------------------------------------------------*/ - - -/** @defgroup I2C_Exported_Constants - * @{ - */ - -#define IS_I2C_ALL_PERIPH(PERIPH) (((PERIPH) == I2C1) || \ - ((PERIPH) == I2C2) || \ - ((PERIPH) == I2C3)) - -/** @defgroup I2C_Digital_Filter - * @{ - */ - -#define IS_I2C_DIGITAL_FILTER(FILTER) ((FILTER) <= 0x0000000F) -/** - * @} - */ - - -/** @defgroup I2C_mode - * @{ - */ - -#define I2C_Mode_I2C ((uint16_t)0x0000) -#define I2C_Mode_SMBusDevice ((uint16_t)0x0002) -#define I2C_Mode_SMBusHost ((uint16_t)0x000A) -#define IS_I2C_MODE(MODE) (((MODE) == I2C_Mode_I2C) || \ - ((MODE) == I2C_Mode_SMBusDevice) || \ - ((MODE) == I2C_Mode_SMBusHost)) -/** - * @} - */ - -/** @defgroup I2C_duty_cycle_in_fast_mode - * @{ - */ - -#define I2C_DutyCycle_16_9 ((uint16_t)0x4000) /*!< I2C fast mode Tlow/Thigh = 16/9 */ -#define I2C_DutyCycle_2 ((uint16_t)0xBFFF) /*!< I2C fast mode Tlow/Thigh = 2 */ -#define IS_I2C_DUTY_CYCLE(CYCLE) (((CYCLE) == I2C_DutyCycle_16_9) || \ - ((CYCLE) == I2C_DutyCycle_2)) -/** - * @} - */ - -/** @defgroup I2C_acknowledgement - * @{ - */ - -#define I2C_Ack_Enable ((uint16_t)0x0400) -#define I2C_Ack_Disable ((uint16_t)0x0000) -#define IS_I2C_ACK_STATE(STATE) (((STATE) == I2C_Ack_Enable) || \ - ((STATE) == I2C_Ack_Disable)) -/** - * @} - */ - -/** @defgroup I2C_transfer_direction - * @{ - */ - -#define I2C_Direction_Transmitter ((uint8_t)0x00) -#define I2C_Direction_Receiver ((uint8_t)0x01) -#define IS_I2C_DIRECTION(DIRECTION) (((DIRECTION) == I2C_Direction_Transmitter) || \ - ((DIRECTION) == I2C_Direction_Receiver)) -/** - * @} - */ - -/** @defgroup I2C_acknowledged_address - * @{ - */ - -#define I2C_AcknowledgedAddress_7bit ((uint16_t)0x4000) -#define I2C_AcknowledgedAddress_10bit ((uint16_t)0xC000) -#define IS_I2C_ACKNOWLEDGE_ADDRESS(ADDRESS) (((ADDRESS) == I2C_AcknowledgedAddress_7bit) || \ - ((ADDRESS) == I2C_AcknowledgedAddress_10bit)) -/** - * @} - */ - -/** @defgroup I2C_registers - * @{ - */ - -#define I2C_Register_CR1 ((uint8_t)0x00) -#define I2C_Register_CR2 ((uint8_t)0x04) -#define I2C_Register_OAR1 ((uint8_t)0x08) -#define I2C_Register_OAR2 ((uint8_t)0x0C) -#define I2C_Register_DR ((uint8_t)0x10) -#define I2C_Register_SR1 ((uint8_t)0x14) -#define I2C_Register_SR2 ((uint8_t)0x18) -#define I2C_Register_CCR ((uint8_t)0x1C) -#define I2C_Register_TRISE ((uint8_t)0x20) -#define IS_I2C_REGISTER(REGISTER) (((REGISTER) == I2C_Register_CR1) || \ - ((REGISTER) == I2C_Register_CR2) || \ - ((REGISTER) == I2C_Register_OAR1) || \ - ((REGISTER) == I2C_Register_OAR2) || \ - ((REGISTER) == I2C_Register_DR) || \ - ((REGISTER) == I2C_Register_SR1) || \ - ((REGISTER) == I2C_Register_SR2) || \ - ((REGISTER) == I2C_Register_CCR) || \ - ((REGISTER) == I2C_Register_TRISE)) -/** - * @} - */ - -/** @defgroup I2C_NACK_position - * @{ - */ - -#define I2C_NACKPosition_Next ((uint16_t)0x0800) -#define I2C_NACKPosition_Current ((uint16_t)0xF7FF) -#define IS_I2C_NACK_POSITION(POSITION) (((POSITION) == I2C_NACKPosition_Next) || \ - ((POSITION) == I2C_NACKPosition_Current)) -/** - * @} - */ - -/** @defgroup I2C_SMBus_alert_pin_level - * @{ - */ - -#define I2C_SMBusAlert_Low ((uint16_t)0x2000) -#define I2C_SMBusAlert_High ((uint16_t)0xDFFF) -#define IS_I2C_SMBUS_ALERT(ALERT) (((ALERT) == I2C_SMBusAlert_Low) || \ - ((ALERT) == I2C_SMBusAlert_High)) -/** - * @} - */ - -/** @defgroup I2C_PEC_position - * @{ - */ - -#define I2C_PECPosition_Next ((uint16_t)0x0800) -#define I2C_PECPosition_Current ((uint16_t)0xF7FF) -#define IS_I2C_PEC_POSITION(POSITION) (((POSITION) == I2C_PECPosition_Next) || \ - ((POSITION) == I2C_PECPosition_Current)) -/** - * @} - */ - -/** @defgroup I2C_interrupts_definition - * @{ - */ - -#define I2C_IT_BUF ((uint16_t)0x0400) -#define I2C_IT_EVT ((uint16_t)0x0200) -#define I2C_IT_ERR ((uint16_t)0x0100) -#define IS_I2C_CONFIG_IT(IT) ((((IT) & (uint16_t)0xF8FF) == 0x00) && ((IT) != 0x00)) -/** - * @} - */ - -/** @defgroup I2C_interrupts_definition - * @{ - */ - -#define I2C_IT_SMBALERT ((uint32_t)0x01008000) -#define I2C_IT_TIMEOUT ((uint32_t)0x01004000) -#define I2C_IT_PECERR ((uint32_t)0x01001000) -#define I2C_IT_OVR ((uint32_t)0x01000800) -#define I2C_IT_AF ((uint32_t)0x01000400) -#define I2C_IT_ARLO ((uint32_t)0x01000200) -#define I2C_IT_BERR ((uint32_t)0x01000100) -#define I2C_IT_TXE ((uint32_t)0x06000080) -#define I2C_IT_RXNE ((uint32_t)0x06000040) -#define I2C_IT_STOPF ((uint32_t)0x02000010) -#define I2C_IT_ADD10 ((uint32_t)0x02000008) -#define I2C_IT_BTF ((uint32_t)0x02000004) -#define I2C_IT_ADDR ((uint32_t)0x02000002) -#define I2C_IT_SB ((uint32_t)0x02000001) - -#define IS_I2C_CLEAR_IT(IT) ((((IT) & (uint16_t)0x20FF) == 0x00) && ((IT) != (uint16_t)0x00)) - -#define IS_I2C_GET_IT(IT) (((IT) == I2C_IT_SMBALERT) || ((IT) == I2C_IT_TIMEOUT) || \ - ((IT) == I2C_IT_PECERR) || ((IT) == I2C_IT_OVR) || \ - ((IT) == I2C_IT_AF) || ((IT) == I2C_IT_ARLO) || \ - ((IT) == I2C_IT_BERR) || ((IT) == I2C_IT_TXE) || \ - ((IT) == I2C_IT_RXNE) || ((IT) == I2C_IT_STOPF) || \ - ((IT) == I2C_IT_ADD10) || ((IT) == I2C_IT_BTF) || \ - ((IT) == I2C_IT_ADDR) || ((IT) == I2C_IT_SB)) -/** - * @} - */ - -/** @defgroup I2C_flags_definition - * @{ - */ - -/** - * @brief SR2 register flags - */ - -#define I2C_FLAG_DUALF ((uint32_t)0x00800000) -#define I2C_FLAG_SMBHOST ((uint32_t)0x00400000) -#define I2C_FLAG_SMBDEFAULT ((uint32_t)0x00200000) -#define I2C_FLAG_GENCALL ((uint32_t)0x00100000) -#define I2C_FLAG_TRA ((uint32_t)0x00040000) -#define I2C_FLAG_BUSY ((uint32_t)0x00020000) -#define I2C_FLAG_MSL ((uint32_t)0x00010000) - -/** - * @brief SR1 register flags - */ - -#define I2C_FLAG_SMBALERT ((uint32_t)0x10008000) -#define I2C_FLAG_TIMEOUT ((uint32_t)0x10004000) -#define I2C_FLAG_PECERR ((uint32_t)0x10001000) -#define I2C_FLAG_OVR ((uint32_t)0x10000800) -#define I2C_FLAG_AF ((uint32_t)0x10000400) -#define I2C_FLAG_ARLO ((uint32_t)0x10000200) -#define I2C_FLAG_BERR ((uint32_t)0x10000100) -#define I2C_FLAG_TXE ((uint32_t)0x10000080) -#define I2C_FLAG_RXNE ((uint32_t)0x10000040) -#define I2C_FLAG_STOPF ((uint32_t)0x10000010) -#define I2C_FLAG_ADD10 ((uint32_t)0x10000008) -#define I2C_FLAG_BTF ((uint32_t)0x10000004) -#define I2C_FLAG_ADDR ((uint32_t)0x10000002) -#define I2C_FLAG_SB ((uint32_t)0x10000001) - -#define IS_I2C_CLEAR_FLAG(FLAG) ((((FLAG) & (uint16_t)0x20FF) == 0x00) && ((FLAG) != (uint16_t)0x00)) - -#define IS_I2C_GET_FLAG(FLAG) (((FLAG) == I2C_FLAG_DUALF) || ((FLAG) == I2C_FLAG_SMBHOST) || \ - ((FLAG) == I2C_FLAG_SMBDEFAULT) || ((FLAG) == I2C_FLAG_GENCALL) || \ - ((FLAG) == I2C_FLAG_TRA) || ((FLAG) == I2C_FLAG_BUSY) || \ - ((FLAG) == I2C_FLAG_MSL) || ((FLAG) == I2C_FLAG_SMBALERT) || \ - ((FLAG) == I2C_FLAG_TIMEOUT) || ((FLAG) == I2C_FLAG_PECERR) || \ - ((FLAG) == I2C_FLAG_OVR) || ((FLAG) == I2C_FLAG_AF) || \ - ((FLAG) == I2C_FLAG_ARLO) || ((FLAG) == I2C_FLAG_BERR) || \ - ((FLAG) == I2C_FLAG_TXE) || ((FLAG) == I2C_FLAG_RXNE) || \ - ((FLAG) == I2C_FLAG_STOPF) || ((FLAG) == I2C_FLAG_ADD10) || \ - ((FLAG) == I2C_FLAG_BTF) || ((FLAG) == I2C_FLAG_ADDR) || \ - ((FLAG) == I2C_FLAG_SB)) -/** - * @} - */ - -/** @defgroup I2C_Events - * @{ - */ - -/** - =============================================================================== - I2C Master Events (Events grouped in order of communication) - =============================================================================== - */ - -/** - * @brief Communication start - * - * After sending the START condition (I2C_GenerateSTART() function) the master - * has to wait for this event. It means that the Start condition has been correctly - * released on the I2C bus (the bus is free, no other devices is communicating). - * - */ -/* --EV5 */ -#define I2C_EVENT_MASTER_MODE_SELECT ((uint32_t)0x00030001) /* BUSY, MSL and SB flag */ - -/** - * @brief Address Acknowledge - * - * After checking on EV5 (start condition correctly released on the bus), the - * master sends the address of the slave(s) with which it will communicate - * (I2C_Send7bitAddress() function, it also determines the direction of the communication: - * Master transmitter or Receiver). Then the master has to wait that a slave acknowledges - * his address. If an acknowledge is sent on the bus, one of the following events will - * be set: - * - * 1) In case of Master Receiver (7-bit addressing): the I2C_EVENT_MASTER_RECEIVER_MODE_SELECTED - * event is set. - * - * 2) In case of Master Transmitter (7-bit addressing): the I2C_EVENT_MASTER_TRANSMITTER_MODE_SELECTED - * is set - * - * 3) In case of 10-Bit addressing mode, the master (just after generating the START - * and checking on EV5) has to send the header of 10-bit addressing mode (I2C_SendData() - * function). Then master should wait on EV9. It means that the 10-bit addressing - * header has been correctly sent on the bus. Then master should send the second part of - * the 10-bit address (LSB) using the function I2C_Send7bitAddress(). Then master - * should wait for event EV6. - * - */ - -/* --EV6 */ -#define I2C_EVENT_MASTER_TRANSMITTER_MODE_SELECTED ((uint32_t)0x00070082) /* BUSY, MSL, ADDR, TXE and TRA flags */ -#define I2C_EVENT_MASTER_RECEIVER_MODE_SELECTED ((uint32_t)0x00030002) /* BUSY, MSL and ADDR flags */ -/* --EV9 */ -#define I2C_EVENT_MASTER_MODE_ADDRESS10 ((uint32_t)0x00030008) /* BUSY, MSL and ADD10 flags */ - -/** - * @brief Communication events - * - * If a communication is established (START condition generated and slave address - * acknowledged) then the master has to check on one of the following events for - * communication procedures: - * - * 1) Master Receiver mode: The master has to wait on the event EV7 then to read - * the data received from the slave (I2C_ReceiveData() function). - * - * 2) Master Transmitter mode: The master has to send data (I2C_SendData() - * function) then to wait on event EV8 or EV8_2. - * These two events are similar: - * - EV8 means that the data has been written in the data register and is - * being shifted out. - * - EV8_2 means that the data has been physically shifted out and output - * on the bus. - * In most cases, using EV8 is sufficient for the application. - * Using EV8_2 leads to a slower communication but ensure more reliable test. - * EV8_2 is also more suitable than EV8 for testing on the last data transmission - * (before Stop condition generation). - * - * @note In case the user software does not guarantee that this event EV7 is - * managed before the current byte end of transfer, then user may check on EV7 - * and BTF flag at the same time (ie. (I2C_EVENT_MASTER_BYTE_RECEIVED | I2C_FLAG_BTF)). - * In this case the communication may be slower. - * - */ - -/* Master RECEIVER mode -----------------------------*/ -/* --EV7 */ -#define I2C_EVENT_MASTER_BYTE_RECEIVED ((uint32_t)0x00030040) /* BUSY, MSL and RXNE flags */ - -/* Master TRANSMITTER mode --------------------------*/ -/* --EV8 */ -#define I2C_EVENT_MASTER_BYTE_TRANSMITTING ((uint32_t)0x00070080) /* TRA, BUSY, MSL, TXE flags */ -/* --EV8_2 */ -#define I2C_EVENT_MASTER_BYTE_TRANSMITTED ((uint32_t)0x00070084) /* TRA, BUSY, MSL, TXE and BTF flags */ - - -/** - =============================================================================== - I2C Slave Events (Events grouped in order of communication) - =============================================================================== - */ - - -/** - * @brief Communication start events - * - * Wait on one of these events at the start of the communication. It means that - * the I2C peripheral detected a Start condition on the bus (generated by master - * device) followed by the peripheral address. The peripheral generates an ACK - * condition on the bus (if the acknowledge feature is enabled through function - * I2C_AcknowledgeConfig()) and the events listed above are set : - * - * 1) In normal case (only one address managed by the slave), when the address - * sent by the master matches the own address of the peripheral (configured by - * I2C_OwnAddress1 field) the I2C_EVENT_SLAVE_XXX_ADDRESS_MATCHED event is set - * (where XXX could be TRANSMITTER or RECEIVER). - * - * 2) In case the address sent by the master matches the second address of the - * peripheral (configured by the function I2C_OwnAddress2Config() and enabled - * by the function I2C_DualAddressCmd()) the events I2C_EVENT_SLAVE_XXX_SECONDADDRESS_MATCHED - * (where XXX could be TRANSMITTER or RECEIVER) are set. - * - * 3) In case the address sent by the master is General Call (address 0x00) and - * if the General Call is enabled for the peripheral (using function I2C_GeneralCallCmd()) - * the following event is set I2C_EVENT_SLAVE_GENERALCALLADDRESS_MATCHED. - * - */ - -/* --EV1 (all the events below are variants of EV1) */ -/* 1) Case of One Single Address managed by the slave */ -#define I2C_EVENT_SLAVE_RECEIVER_ADDRESS_MATCHED ((uint32_t)0x00020002) /* BUSY and ADDR flags */ -#define I2C_EVENT_SLAVE_TRANSMITTER_ADDRESS_MATCHED ((uint32_t)0x00060082) /* TRA, BUSY, TXE and ADDR flags */ - -/* 2) Case of Dual address managed by the slave */ -#define I2C_EVENT_SLAVE_RECEIVER_SECONDADDRESS_MATCHED ((uint32_t)0x00820000) /* DUALF and BUSY flags */ -#define I2C_EVENT_SLAVE_TRANSMITTER_SECONDADDRESS_MATCHED ((uint32_t)0x00860080) /* DUALF, TRA, BUSY and TXE flags */ - -/* 3) Case of General Call enabled for the slave */ -#define I2C_EVENT_SLAVE_GENERALCALLADDRESS_MATCHED ((uint32_t)0x00120000) /* GENCALL and BUSY flags */ - -/** - * @brief Communication events - * - * Wait on one of these events when EV1 has already been checked and: - * - * - Slave RECEIVER mode: - * - EV2: When the application is expecting a data byte to be received. - * - EV4: When the application is expecting the end of the communication: master - * sends a stop condition and data transmission is stopped. - * - * - Slave Transmitter mode: - * - EV3: When a byte has been transmitted by the slave and the application is expecting - * the end of the byte transmission. The two events I2C_EVENT_SLAVE_BYTE_TRANSMITTED and - * I2C_EVENT_SLAVE_BYTE_TRANSMITTING are similar. The second one can optionally be - * used when the user software doesn't guarantee the EV3 is managed before the - * current byte end of transfer. - * - EV3_2: When the master sends a NACK in order to tell slave that data transmission - * shall end (before sending the STOP condition). In this case slave has to stop sending - * data bytes and expect a Stop condition on the bus. - * - * @note In case the user software does not guarantee that the event EV2 is - * managed before the current byte end of transfer, then user may check on EV2 - * and BTF flag at the same time (ie. (I2C_EVENT_SLAVE_BYTE_RECEIVED | I2C_FLAG_BTF)). - * In this case the communication may be slower. - * - */ - -/* Slave RECEIVER mode --------------------------*/ -/* --EV2 */ -#define I2C_EVENT_SLAVE_BYTE_RECEIVED ((uint32_t)0x00020040) /* BUSY and RXNE flags */ -/* --EV4 */ -#define I2C_EVENT_SLAVE_STOP_DETECTED ((uint32_t)0x00000010) /* STOPF flag */ - -/* Slave TRANSMITTER mode -----------------------*/ -/* --EV3 */ -#define I2C_EVENT_SLAVE_BYTE_TRANSMITTED ((uint32_t)0x00060084) /* TRA, BUSY, TXE and BTF flags */ -#define I2C_EVENT_SLAVE_BYTE_TRANSMITTING ((uint32_t)0x00060080) /* TRA, BUSY and TXE flags */ -/* --EV3_2 */ -#define I2C_EVENT_SLAVE_ACK_FAILURE ((uint32_t)0x00000400) /* AF flag */ - -/* - =============================================================================== - End of Events Description - =============================================================================== - */ - -#define IS_I2C_EVENT(EVENT) (((EVENT) == I2C_EVENT_SLAVE_TRANSMITTER_ADDRESS_MATCHED) || \ - ((EVENT) == I2C_EVENT_SLAVE_RECEIVER_ADDRESS_MATCHED) || \ - ((EVENT) == I2C_EVENT_SLAVE_TRANSMITTER_SECONDADDRESS_MATCHED) || \ - ((EVENT) == I2C_EVENT_SLAVE_RECEIVER_SECONDADDRESS_MATCHED) || \ - ((EVENT) == I2C_EVENT_SLAVE_GENERALCALLADDRESS_MATCHED) || \ - ((EVENT) == I2C_EVENT_SLAVE_BYTE_RECEIVED) || \ - ((EVENT) == (I2C_EVENT_SLAVE_BYTE_RECEIVED | I2C_FLAG_DUALF)) || \ - ((EVENT) == (I2C_EVENT_SLAVE_BYTE_RECEIVED | I2C_FLAG_GENCALL)) || \ - ((EVENT) == I2C_EVENT_SLAVE_BYTE_TRANSMITTED) || \ - ((EVENT) == (I2C_EVENT_SLAVE_BYTE_TRANSMITTED | I2C_FLAG_DUALF)) || \ - ((EVENT) == (I2C_EVENT_SLAVE_BYTE_TRANSMITTED | I2C_FLAG_GENCALL)) || \ - ((EVENT) == I2C_EVENT_SLAVE_STOP_DETECTED) || \ - ((EVENT) == I2C_EVENT_MASTER_MODE_SELECT) || \ - ((EVENT) == I2C_EVENT_MASTER_TRANSMITTER_MODE_SELECTED) || \ - ((EVENT) == I2C_EVENT_MASTER_RECEIVER_MODE_SELECTED) || \ - ((EVENT) == I2C_EVENT_MASTER_BYTE_RECEIVED) || \ - ((EVENT) == I2C_EVENT_MASTER_BYTE_TRANSMITTED) || \ - ((EVENT) == I2C_EVENT_MASTER_BYTE_TRANSMITTING) || \ - ((EVENT) == I2C_EVENT_MASTER_MODE_ADDRESS10) || \ - ((EVENT) == I2C_EVENT_SLAVE_ACK_FAILURE)) -/** - * @} - */ - -/** @defgroup I2C_own_address1 - * @{ - */ - -#define IS_I2C_OWN_ADDRESS1(ADDRESS1) ((ADDRESS1) <= 0x3FF) -/** - * @} - */ - -/** @defgroup I2C_clock_speed - * @{ - */ - -#define IS_I2C_CLOCK_SPEED(SPEED) (((SPEED) >= 0x1) && ((SPEED) <= 400000)) -/** - * @} - */ - -/** - * @} - */ - -/* Exported macro ------------------------------------------------------------*/ -/* Exported functions --------------------------------------------------------*/ - -/* Function used to set the I2C configuration to the default reset state *****/ -void I2C_DeInit(I2C_TypeDef* I2Cx); - -/* Initialization and Configuration functions *********************************/ -void I2C_Init(I2C_TypeDef* I2Cx, I2C_InitTypeDef* I2C_InitStruct); -void I2C_StructInit(I2C_InitTypeDef* I2C_InitStruct); -void I2C_Cmd(I2C_TypeDef* I2Cx, FunctionalState NewState); -void I2C_DigitalFilterConfig(I2C_TypeDef* I2Cx, uint16_t I2C_DigitalFilter); -void I2C_AnalogFilterCmd(I2C_TypeDef* I2Cx, FunctionalState NewState); -void I2C_GenerateSTART(I2C_TypeDef* I2Cx, FunctionalState NewState); -void I2C_GenerateSTOP(I2C_TypeDef* I2Cx, FunctionalState NewState); -void I2C_Send7bitAddress(I2C_TypeDef* I2Cx, uint8_t Address, uint8_t I2C_Direction); -void I2C_AcknowledgeConfig(I2C_TypeDef* I2Cx, FunctionalState NewState); -void I2C_OwnAddress2Config(I2C_TypeDef* I2Cx, uint8_t Address); -void I2C_DualAddressCmd(I2C_TypeDef* I2Cx, FunctionalState NewState); -void I2C_GeneralCallCmd(I2C_TypeDef* I2Cx, FunctionalState NewState); -void I2C_SoftwareResetCmd(I2C_TypeDef* I2Cx, FunctionalState NewState); -void I2C_StretchClockCmd(I2C_TypeDef* I2Cx, FunctionalState NewState); -void I2C_FastModeDutyCycleConfig(I2C_TypeDef* I2Cx, uint16_t I2C_DutyCycle); -void I2C_NACKPositionConfig(I2C_TypeDef* I2Cx, uint16_t I2C_NACKPosition); -void I2C_SMBusAlertConfig(I2C_TypeDef* I2Cx, uint16_t I2C_SMBusAlert); -void I2C_ARPCmd(I2C_TypeDef* I2Cx, FunctionalState NewState); - -/* Data transfers functions ***************************************************/ -void I2C_SendData(I2C_TypeDef* I2Cx, uint8_t Data); -uint8_t I2C_ReceiveData(I2C_TypeDef* I2Cx); - -/* PEC management functions ***************************************************/ -void I2C_TransmitPEC(I2C_TypeDef* I2Cx, FunctionalState NewState); -void I2C_PECPositionConfig(I2C_TypeDef* I2Cx, uint16_t I2C_PECPosition); -void I2C_CalculatePEC(I2C_TypeDef* I2Cx, FunctionalState NewState); -uint8_t I2C_GetPEC(I2C_TypeDef* I2Cx); - -/* DMA transfers management functions *****************************************/ -void I2C_DMACmd(I2C_TypeDef* I2Cx, FunctionalState NewState); -void I2C_DMALastTransferCmd(I2C_TypeDef* I2Cx, FunctionalState NewState); - -/* Interrupts, events and flags management functions **************************/ -uint16_t I2C_ReadRegister(I2C_TypeDef* I2Cx, uint8_t I2C_Register); -void I2C_ITConfig(I2C_TypeDef* I2Cx, uint16_t I2C_IT, FunctionalState NewState); - -/* - =============================================================================== - I2C State Monitoring Functions - =============================================================================== - This I2C driver provides three different ways for I2C state monitoring - depending on the application requirements and constraints: - - - 1. Basic state monitoring (Using I2C_CheckEvent() function) - ----------------------------------------------------------- - It compares the status registers (SR1 and SR2) content to a given event - (can be the combination of one or more flags). - It returns SUCCESS if the current status includes the given flags - and returns ERROR if one or more flags are missing in the current status. - - - When to use - - This function is suitable for most applications as well as for startup - activity since the events are fully described in the product reference - manual (RM0090). - - It is also suitable for users who need to define their own events. - - - Limitations - - If an error occurs (ie. error flags are set besides to the monitored - flags), the I2C_CheckEvent() function may return SUCCESS despite - the communication hold or corrupted real state. - In this case, it is advised to use error interrupts to monitor - the error events and handle them in the interrupt IRQ handler. - - Note - For error management, it is advised to use the following functions: - - I2C_ITConfig() to configure and enable the error interrupts (I2C_IT_ERR). - - I2Cx_ER_IRQHandler() which is called when the error interrupt occurs. - Where x is the peripheral instance (I2C1, I2C2 ...) - - I2C_GetFlagStatus() or I2C_GetITStatus() to be called into the - I2Cx_ER_IRQHandler() function in order to determine which error occurred. - - I2C_ClearFlag() or I2C_ClearITPendingBit() and/or I2C_SoftwareResetCmd() - and/or I2C_GenerateStop() in order to clear the error flag and source - and return to correct communication status. - - - 2. Advanced state monitoring (Using the function I2C_GetLastEvent()) - -------------------------------------------------------------------- - Using the function I2C_GetLastEvent() which returns the image of both status - registers in a single word (uint32_t) (Status Register 2 value is shifted left - by 16 bits and concatenated to Status Register 1). - - - When to use - - This function is suitable for the same applications above but it - allows to overcome the mentioned limitation of I2C_GetFlagStatus() - function. - - The returned value could be compared to events already defined in - this file or to custom values defined by user. - This function is suitable when multiple flags are monitored at the - same time. - - At the opposite of I2C_CheckEvent() function, this function allows - user to choose when an event is accepted (when all events flags are - set and no other flags are set or just when the needed flags are set - like I2C_CheckEvent() function. - - - Limitations - - User may need to define his own events. - - Same remark concerning the error management is applicable for this - function if user decides to check only regular communication flags - (and ignores error flags). - - - 3. Flag-based state monitoring (Using the function I2C_GetFlagStatus()) - ----------------------------------------------------------------------- - - Using the function I2C_GetFlagStatus() which simply returns the status of - one single flag (ie. I2C_FLAG_RXNE ...). - - - When to use - - This function could be used for specific applications or in debug - phase. - - It is suitable when only one flag checking is needed (most I2C - events are monitored through multiple flags). - - Limitations: - - When calling this function, the Status register is accessed. - Some flags are cleared when the status register is accessed. - So checking the status of one Flag, may clear other ones. - - Function may need to be called twice or more in order to monitor - one single event. - */ - -/* - =============================================================================== - 1. Basic state monitoring - =============================================================================== - */ -ErrorStatus I2C_CheckEvent(I2C_TypeDef* I2Cx, uint32_t I2C_EVENT); -/* - =============================================================================== - 2. Advanced state monitoring - =============================================================================== - */ -uint32_t I2C_GetLastEvent(I2C_TypeDef* I2Cx); -/* - =============================================================================== - 3. Flag-based state monitoring - =============================================================================== - */ -FlagStatus I2C_GetFlagStatus(I2C_TypeDef* I2Cx, uint32_t I2C_FLAG); - - -void I2C_ClearFlag(I2C_TypeDef* I2Cx, uint32_t I2C_FLAG); -ITStatus I2C_GetITStatus(I2C_TypeDef* I2Cx, uint32_t I2C_IT); -void I2C_ClearITPendingBit(I2C_TypeDef* I2Cx, uint32_t I2C_IT); - -#ifdef __cplusplus -} -#endif - -#endif /*__STM32F4xx_I2C_H */ - -/** - * @} - */ - -/** - * @} - */ - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/stm/lib/stm32f4xx_pwr.c b/stm/lib/stm32f4xx_pwr.c deleted file mode 100644 index 61b8515e1..000000000 --- a/stm/lib/stm32f4xx_pwr.c +++ /dev/null @@ -1,885 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f4xx_pwr.c - * @author MCD Application Team - * @version V1.3.0 - * @date 08-November-2013 - * @brief This file provides firmware functions to manage the following - * functionalities of the Power Controller (PWR) peripheral: - * + Backup Domain Access - * + PVD configuration - * + WakeUp pin configuration - * + Main and Backup Regulators configuration - * + FLASH Power Down configuration - * + Low Power modes configuration - * + Flags management - * - ****************************************************************************** - * @attention - * - *

© COPYRIGHT 2013 STMicroelectronics

- * - * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License"); - * You may not use this file except in compliance with the License. - * You may obtain a copy of the License at: - * - * http://www.st.com/software_license_agreement_liberty_v2 - * - * Unless required by applicable law or agreed to in writing, software - * distributed under the License is distributed on an "AS IS" BASIS, - * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - * See the License for the specific language governing permissions and - * limitations under the License. - * - ****************************************************************************** - */ - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx_pwr.h" -#include "stm32f4xx_rcc.h" - -/** @addtogroup STM32F4xx_StdPeriph_Driver - * @{ - */ - -/** @defgroup PWR - * @brief PWR driver modules - * @{ - */ - -/* Private typedef -----------------------------------------------------------*/ -/* Private define ------------------------------------------------------------*/ -/* --------- PWR registers bit address in the alias region ---------- */ -#define PWR_OFFSET (PWR_BASE - PERIPH_BASE) - -/* --- CR Register ---*/ - -/* Alias word address of DBP bit */ -#define CR_OFFSET (PWR_OFFSET + 0x00) -#define DBP_BitNumber 0x08 -#define CR_DBP_BB (PERIPH_BB_BASE + (CR_OFFSET * 32) + (DBP_BitNumber * 4)) - -/* Alias word address of PVDE bit */ -#define PVDE_BitNumber 0x04 -#define CR_PVDE_BB (PERIPH_BB_BASE + (CR_OFFSET * 32) + (PVDE_BitNumber * 4)) - -/* Alias word address of FPDS bit */ -#define FPDS_BitNumber 0x09 -#define CR_FPDS_BB (PERIPH_BB_BASE + (CR_OFFSET * 32) + (FPDS_BitNumber * 4)) - -/* Alias word address of PMODE bit */ -#define PMODE_BitNumber 0x0E -#define CR_PMODE_BB (PERIPH_BB_BASE + (CR_OFFSET * 32) + (PMODE_BitNumber * 4)) - -/* Alias word address of ODEN bit */ -#define ODEN_BitNumber 0x10 -#define CR_ODEN_BB (PERIPH_BB_BASE + (CR_OFFSET * 32) + (ODEN_BitNumber * 4)) - -/* Alias word address of ODSWEN bit */ -#define ODSWEN_BitNumber 0x11 -#define CR_ODSWEN_BB (PERIPH_BB_BASE + (CR_OFFSET * 32) + (ODSWEN_BitNumber * 4)) - -/* --- CSR Register ---*/ - -/* Alias word address of EWUP bit */ -#define CSR_OFFSET (PWR_OFFSET + 0x04) -#define EWUP_BitNumber 0x08 -#define CSR_EWUP_BB (PERIPH_BB_BASE + (CSR_OFFSET * 32) + (EWUP_BitNumber * 4)) - -/* Alias word address of BRE bit */ -#define BRE_BitNumber 0x09 -#define CSR_BRE_BB (PERIPH_BB_BASE + (CSR_OFFSET * 32) + (BRE_BitNumber * 4)) - -/* ------------------ PWR registers bit mask ------------------------ */ - -/* CR register bit mask */ -#define CR_DS_MASK ((uint32_t)0xFFFFF3FC) -#define CR_PLS_MASK ((uint32_t)0xFFFFFF1F) -#define CR_VOS_MASK ((uint32_t)0xFFFF3FFF) - -/* Private macro -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -/* Private function prototypes -----------------------------------------------*/ -/* Private functions ---------------------------------------------------------*/ - -/** @defgroup PWR_Private_Functions - * @{ - */ - -/** @defgroup PWR_Group1 Backup Domain Access function - * @brief Backup Domain Access function - * -@verbatim - =============================================================================== - ##### Backup Domain Access function ##### - =============================================================================== - [..] - After reset, the backup domain (RTC registers, RTC backup data - registers and backup SRAM) is protected against possible unwanted - write accesses. - To enable access to the RTC Domain and RTC registers, proceed as follows: - (+) Enable the Power Controller (PWR) APB1 interface clock using the - RCC_APB1PeriphClockCmd() function. - (+) Enable access to RTC domain using the PWR_BackupAccessCmd() function. - -@endverbatim - * @{ - */ - -/** - * @brief Deinitializes the PWR peripheral registers to their default reset values. - * @param None - * @retval None - */ -void PWR_DeInit(void) -{ - RCC_APB1PeriphResetCmd(RCC_APB1Periph_PWR, ENABLE); - RCC_APB1PeriphResetCmd(RCC_APB1Periph_PWR, DISABLE); -} - -/** - * @brief Enables or disables access to the backup domain (RTC registers, RTC - * backup data registers and backup SRAM). - * @note If the HSE divided by 2, 3, ..31 is used as the RTC clock, the - * Backup Domain Access should be kept enabled. - * @param NewState: new state of the access to the backup domain. - * This parameter can be: ENABLE or DISABLE. - * @retval None - */ -void PWR_BackupAccessCmd(FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_FUNCTIONAL_STATE(NewState)); - - *(__IO uint32_t *) CR_DBP_BB = (uint32_t)NewState; -} - -/** - * @} - */ - -/** @defgroup PWR_Group2 PVD configuration functions - * @brief PVD configuration functions - * -@verbatim - =============================================================================== - ##### PVD configuration functions ##### - =============================================================================== - [..] - (+) The PVD is used to monitor the VDD power supply by comparing it to a - threshold selected by the PVD Level (PLS[2:0] bits in the PWR_CR). - (+) A PVDO flag is available to indicate if VDD/VDDA is higher or lower - than the PVD threshold. This event is internally connected to the EXTI - line16 and can generate an interrupt if enabled through the EXTI registers. - (+) The PVD is stopped in Standby mode. - -@endverbatim - * @{ - */ - -/** - * @brief Configures the voltage threshold detected by the Power Voltage Detector(PVD). - * @param PWR_PVDLevel: specifies the PVD detection level - * This parameter can be one of the following values: - * @arg PWR_PVDLevel_0 - * @arg PWR_PVDLevel_1 - * @arg PWR_PVDLevel_2 - * @arg PWR_PVDLevel_3 - * @arg PWR_PVDLevel_4 - * @arg PWR_PVDLevel_5 - * @arg PWR_PVDLevel_6 - * @arg PWR_PVDLevel_7 - * @note Refer to the electrical characteristics of your device datasheet for - * more details about the voltage threshold corresponding to each - * detection level. - * @retval None - */ -void PWR_PVDLevelConfig(uint32_t PWR_PVDLevel) -{ - uint32_t tmpreg = 0; - - /* Check the parameters */ - assert_param(IS_PWR_PVD_LEVEL(PWR_PVDLevel)); - - tmpreg = PWR->CR; - - /* Clear PLS[7:5] bits */ - tmpreg &= CR_PLS_MASK; - - /* Set PLS[7:5] bits according to PWR_PVDLevel value */ - tmpreg |= PWR_PVDLevel; - - /* Store the new value */ - PWR->CR = tmpreg; -} - -/** - * @brief Enables or disables the Power Voltage Detector(PVD). - * @param NewState: new state of the PVD. - * This parameter can be: ENABLE or DISABLE. - * @retval None - */ -void PWR_PVDCmd(FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_FUNCTIONAL_STATE(NewState)); - - *(__IO uint32_t *) CR_PVDE_BB = (uint32_t)NewState; -} - -/** - * @} - */ - -/** @defgroup PWR_Group3 WakeUp pin configuration functions - * @brief WakeUp pin configuration functions - * -@verbatim - =============================================================================== - ##### WakeUp pin configuration functions ##### - =============================================================================== - [..] - (+) WakeUp pin is used to wakeup the system from Standby mode. This pin is - forced in input pull down configuration and is active on rising edges. - (+) There is only one WakeUp pin: WakeUp Pin 1 on PA.00. - -@endverbatim - * @{ - */ - -/** - * @brief Enables or disables the WakeUp Pin functionality. - * @param NewState: new state of the WakeUp Pin functionality. - * This parameter can be: ENABLE or DISABLE. - * @retval None - */ -void PWR_WakeUpPinCmd(FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_FUNCTIONAL_STATE(NewState)); - - *(__IO uint32_t *) CSR_EWUP_BB = (uint32_t)NewState; -} - -/** - * @} - */ - -/** @defgroup PWR_Group4 Main and Backup Regulators configuration functions - * @brief Main and Backup Regulators configuration functions - * -@verbatim - =============================================================================== - ##### Main and Backup Regulators configuration functions ##### - =============================================================================== - [..] - (+) The backup domain includes 4 Kbytes of backup SRAM accessible only from - the CPU, and address in 32-bit, 16-bit or 8-bit mode. Its content is - retained even in Standby or VBAT mode when the low power backup regulator - is enabled. It can be considered as an internal EEPROM when VBAT is - always present. You can use the PWR_BackupRegulatorCmd() function to - enable the low power backup regulator and use the PWR_GetFlagStatus - (PWR_FLAG_BRR) to check if it is ready or not. - - (+) When the backup domain is supplied by VDD (analog switch connected to VDD) - the backup SRAM is powered from VDD which replaces the VBAT power supply to - save battery life. - - (+) The backup SRAM is not mass erased by an tamper event. It is read - protected to prevent confidential data, such as cryptographic private - key, from being accessed. The backup SRAM can be erased only through - the Flash interface when a protection level change from level 1 to - level 0 is requested. - -@- Refer to the description of Read protection (RDP) in the reference manual. - - (+) The main internal regulator can be configured to have a tradeoff between - performance and power consumption when the device does not operate at - the maximum frequency. - (+) For STM32F405xx/407xx and STM32F415xx/417xx Devices, the regulator can be - configured on the fly through PWR_MainRegulatorModeConfig() function which - configure VOS bit in PWR_CR register: - (++) When this bit is set (Regulator voltage output Scale 1 mode selected) - the System frequency can go up to 168 MHz. - (++) When this bit is reset (Regulator voltage output Scale 2 mode selected) - the System frequency can go up to 144 MHz. - - (+) For STM32F42xxx/43xxx Devices, the regulator can be configured through - PWR_MainRegulatorModeConfig() function which configure VOS[1:0] bits in - PWR_CR register: - which configure VOS[1:0] bits in PWR_CR register: - (++) When VOS[1:0] = 11 (Regulator voltage output Scale 1 mode selected) - the System frequency can go up to 168 MHz. - (++) When VOS[1:0] = 10 (Regulator voltage output Scale 2 mode selected) - the System frequency can go up to 144 MHz. - (++) When VOS[1:0] = 01 (Regulator voltage output Scale 3 mode selected) - the System frequency can go up to 120 MHz. - - (+) For STM32F42xxx/43xxx Devices, the scale can be modified only when the PLL - is OFF and the HSI or HSE clock source is selected as system clock. - The new value programmed is active only when the PLL is ON. - When the PLL is OFF, the voltage scale 3 is automatically selected. - Refer to the datasheets for more details. - - (+) For STM32F42xxx/43xxx Devices, in Run mode: the main regulator has - 2 operating modes available: - (++) Normal mode: The CPU and core logic operate at maximum frequency at a given - voltage scaling (scale 1, scale 2 or scale 3) - (++) Over-drive mode: This mode allows the CPU and the core logic to operate at a - higher frequency than the normal mode for a given voltage scaling (scale 1, - scale 2 or scale 3). This mode is enabled through PWR_OverDriveCmd() function and - PWR_OverDriveSWCmd() function, to enter or exit from Over-drive mode please follow - the sequence described in Reference manual. - - (+) For STM32F42xxx/43xxx Devices, in Stop mode: the main regulator or low power regulator - supplies a low power voltage to the 1.2V domain, thus preserving the content of registers - and internal SRAM. 2 operating modes are available: - (++) Normal mode: the 1.2V domain is preserved in nominal leakage mode. This mode is only - available when the main regulator or the low power regulator is used in Scale 3 or - low voltage mode. - (++) Under-drive mode: the 1.2V domain is preserved in reduced leakage mode. This mode is only - available when the main regulator or the low power regulator is in low voltage mode. - This mode is enabled through PWR_UnderDriveCmd() function. - -@endverbatim - * @{ - */ - -/** - * @brief Enables or disables the Backup Regulator. - * @param NewState: new state of the Backup Regulator. - * This parameter can be: ENABLE or DISABLE. - * @retval None - */ -void PWR_BackupRegulatorCmd(FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_FUNCTIONAL_STATE(NewState)); - - *(__IO uint32_t *) CSR_BRE_BB = (uint32_t)NewState; -} - -/** - * @brief Configures the main internal regulator output voltage. - * @param PWR_Regulator_Voltage: specifies the regulator output voltage to achieve - * a tradeoff between performance and power consumption when the device does - * not operate at the maximum frequency (refer to the datasheets for more details). - * This parameter can be one of the following values: - * @arg PWR_Regulator_Voltage_Scale1: Regulator voltage output Scale 1 mode, - * System frequency up to 168 MHz. - * @arg PWR_Regulator_Voltage_Scale2: Regulator voltage output Scale 2 mode, - * System frequency up to 144 MHz. - * @arg PWR_Regulator_Voltage_Scale3: Regulator voltage output Scale 3 mode, - * System frequency up to 120 MHz (only for STM32F42xxx/43xxx devices) - * @retval None - */ -void PWR_MainRegulatorModeConfig(uint32_t PWR_Regulator_Voltage) -{ - uint32_t tmpreg = 0; - - /* Check the parameters */ - assert_param(IS_PWR_REGULATOR_VOLTAGE(PWR_Regulator_Voltage)); - - tmpreg = PWR->CR; - - /* Clear VOS[15:14] bits */ - tmpreg &= CR_VOS_MASK; - - /* Set VOS[15:14] bits according to PWR_Regulator_Voltage value */ - tmpreg |= PWR_Regulator_Voltage; - - /* Store the new value */ - PWR->CR = tmpreg; -} - -/** - * @brief Enables or disables the Over-Drive. - * - * @note This function can be used only for STM32F42xxx/STM3243xxx devices. - * This mode allows the CPU and the core logic to operate at a higher frequency - * than the normal mode for a given voltage scaling (scale 1, scale 2 or scale 3). - * - * @note It is recommended to enter or exit Over-drive mode when the application is not running - * critical tasks and when the system clock source is either HSI or HSE. - * During the Over-drive switch activation, no peripheral clocks should be enabled. - * The peripheral clocks must be enabled once the Over-drive mode is activated. - * - * @param NewState: new state of the Over Drive mode. - * This parameter can be: ENABLE or DISABLE. - * @retval None - */ -void PWR_OverDriveCmd(FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_FUNCTIONAL_STATE(NewState)); - - /* Set/Reset the ODEN bit to enable/disable the Over Drive mode */ - *(__IO uint32_t *) CR_ODEN_BB = (uint32_t)NewState; -} - -/** - * @brief Enables or disables the Over-Drive switching. - * - * @note This function can be used only for STM32F42xxx/STM3243xxx devices. - * - * @param NewState: new state of the Over Drive switching mode. - * This parameter can be: ENABLE or DISABLE. - * @retval None - */ -void PWR_OverDriveSWCmd(FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_FUNCTIONAL_STATE(NewState)); - - /* Set/Reset the ODSWEN bit to enable/disable the Over Drive switching mode */ - *(__IO uint32_t *) CR_ODSWEN_BB = (uint32_t)NewState; -} - -/** - * @brief Enables or disables the Under-Drive mode. - * - * @note This function can be used only for STM32F42xxx/STM3243xxx devices. - * @note This mode is enabled only with STOP low power mode. - * In this mode, the 1.2V domain is preserved in reduced leakage mode. This - * mode is only available when the main regulator or the low power regulator - * is in low voltage mode - * - * @note If the Under-drive mode was enabled, it is automatically disabled after - * exiting Stop mode. - * When the voltage regulator operates in Under-drive mode, an additional - * startup delay is induced when waking up from Stop mode. - * - * @param NewState: new state of the Under Drive mode. - * This parameter can be: ENABLE or DISABLE. - * @retval None - */ -void PWR_UnderDriveCmd(FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_FUNCTIONAL_STATE(NewState)); - - if (NewState != DISABLE) - { - /* Set the UDEN[1:0] bits to enable the Under Drive mode */ - PWR->CR |= (uint32_t)PWR_CR_UDEN; - } - else - { - /* Reset the UDEN[1:0] bits to disable the Under Drive mode */ - PWR->CR &= (uint32_t)(~PWR_CR_UDEN); - } -} - -/** - * @} - */ - -/** @defgroup PWR_Group5 FLASH Power Down configuration functions - * @brief FLASH Power Down configuration functions - * -@verbatim - =============================================================================== - ##### FLASH Power Down configuration functions ##### - =============================================================================== - [..] - (+) By setting the FPDS bit in the PWR_CR register by using the - PWR_FlashPowerDownCmd() function, the Flash memory also enters power - down mode when the device enters Stop mode. When the Flash memory - is in power down mode, an additional startup delay is incurred when - waking up from Stop mode. -@endverbatim - * @{ - */ - -/** - * @brief Enables or disables the Flash Power Down in STOP mode. - * @param NewState: new state of the Flash power mode. - * This parameter can be: ENABLE or DISABLE. - * @retval None - */ -void PWR_FlashPowerDownCmd(FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_FUNCTIONAL_STATE(NewState)); - - *(__IO uint32_t *) CR_FPDS_BB = (uint32_t)NewState; -} - -/** - * @} - */ - -/** @defgroup PWR_Group6 Low Power modes configuration functions - * @brief Low Power modes configuration functions - * -@verbatim - =============================================================================== - ##### Low Power modes configuration functions ##### - =============================================================================== - [..] - The devices feature 3 low-power modes: - (+) Sleep mode: Cortex-M4 core stopped, peripherals kept running. - (+) Stop mode: all clocks are stopped, regulator running, regulator - in low power mode - (+) Standby mode: 1.2V domain powered off. - - *** Sleep mode *** - ================== - [..] - (+) Entry: - (++) The Sleep mode is entered by using the __WFI() or __WFE() functions. - (+) Exit: - (++) Any peripheral interrupt acknowledged by the nested vectored interrupt - controller (NVIC) can wake up the device from Sleep mode. - - *** Stop mode *** - ================= - [..] - In Stop mode, all clocks in the 1.2V domain are stopped, the PLL, the HSI, - and the HSE RC oscillators are disabled. Internal SRAM and register contents - are preserved. - The voltage regulator can be configured either in normal or low-power mode. - To minimize the consumption In Stop mode, FLASH can be powered off before - entering the Stop mode. It can be switched on again by software after exiting - the Stop mode using the PWR_FlashPowerDownCmd() function. - - (+) Entry: - (++) The Stop mode is entered using the PWR_EnterSTOPMode(PWR_MainRegulator_ON) - function with: - (+++) Main regulator ON. - (+++) Low Power regulator ON. - (+) Exit: - (++) Any EXTI Line (Internal or External) configured in Interrupt/Event mode. - - *** Standby mode *** - ==================== - [..] - The Standby mode allows to achieve the lowest power consumption. It is based - on the Cortex-M4 deepsleep mode, with the voltage regulator disabled. - The 1.2V domain is consequently powered off. The PLL, the HSI oscillator and - the HSE oscillator are also switched off. SRAM and register contents are lost - except for the RTC registers, RTC backup registers, backup SRAM and Standby - circuitry. - - The voltage regulator is OFF. - - (+) Entry: - (++) The Standby mode is entered using the PWR_EnterSTANDBYMode() function. - (+) Exit: - (++) WKUP pin rising edge, RTC alarm (Alarm A and Alarm B), RTC wakeup, - tamper event, time-stamp event, external reset in NRST pin, IWDG reset. - - *** Auto-wakeup (AWU) from low-power mode *** - ============================================= - [..] - The MCU can be woken up from low-power mode by an RTC Alarm event, an RTC - Wakeup event, a tamper event, a time-stamp event, or a comparator event, - without depending on an external interrupt (Auto-wakeup mode). - - (#) RTC auto-wakeup (AWU) from the Stop mode - - (++) To wake up from the Stop mode with an RTC alarm event, it is necessary to: - (+++) Configure the EXTI Line 17 to be sensitive to rising edges (Interrupt - or Event modes) using the EXTI_Init() function. - (+++) Enable the RTC Alarm Interrupt using the RTC_ITConfig() function - (+++) Configure the RTC to generate the RTC alarm using the RTC_SetAlarm() - and RTC_AlarmCmd() functions. - (++) To wake up from the Stop mode with an RTC Tamper or time stamp event, it - is necessary to: - (+++) Configure the EXTI Line 21 to be sensitive to rising edges (Interrupt - or Event modes) using the EXTI_Init() function. - (+++) Enable the RTC Tamper or time stamp Interrupt using the RTC_ITConfig() - function - (+++) Configure the RTC to detect the tamper or time stamp event using the - RTC_TimeStampConfig(), RTC_TamperTriggerConfig() and RTC_TamperCmd() - functions. - (++) To wake up from the Stop mode with an RTC WakeUp event, it is necessary to: - (+++) Configure the EXTI Line 22 to be sensitive to rising edges (Interrupt - or Event modes) using the EXTI_Init() function. - (+++) Enable the RTC WakeUp Interrupt using the RTC_ITConfig() function - (+++) Configure the RTC to generate the RTC WakeUp event using the RTC_WakeUpClockConfig(), - RTC_SetWakeUpCounter() and RTC_WakeUpCmd() functions. - - (#) RTC auto-wakeup (AWU) from the Standby mode - - (++) To wake up from the Standby mode with an RTC alarm event, it is necessary to: - (+++) Enable the RTC Alarm Interrupt using the RTC_ITConfig() function - (+++) Configure the RTC to generate the RTC alarm using the RTC_SetAlarm() - and RTC_AlarmCmd() functions. - (++) To wake up from the Standby mode with an RTC Tamper or time stamp event, it - is necessary to: - (+++) Enable the RTC Tamper or time stamp Interrupt using the RTC_ITConfig() - function - (+++) Configure the RTC to detect the tamper or time stamp event using the - RTC_TimeStampConfig(), RTC_TamperTriggerConfig() and RTC_TamperCmd() - functions. - (++) To wake up from the Standby mode with an RTC WakeUp event, it is necessary to: - (+++) Enable the RTC WakeUp Interrupt using the RTC_ITConfig() function - (+++) Configure the RTC to generate the RTC WakeUp event using the RTC_WakeUpClockConfig(), - RTC_SetWakeUpCounter() and RTC_WakeUpCmd() functions. - -@endverbatim - * @{ - */ - -/** - * @brief Enters STOP mode. - * - * @note In Stop mode, all I/O pins keep the same state as in Run mode. - * @note When exiting Stop mode by issuing an interrupt or a wakeup event, - * the HSI RC oscillator is selected as system clock. - * @note When the voltage regulator operates in low power mode, an additional - * startup delay is incurred when waking up from Stop mode. - * By keeping the internal regulator ON during Stop mode, the consumption - * is higher although the startup time is reduced. - * - * @param PWR_Regulator: specifies the regulator state in STOP mode. - * This parameter can be one of the following values: - * @arg PWR_MainRegulator_ON: STOP mode with regulator ON - * @arg PWR_LowPowerRegulator_ON: STOP mode with low power regulator ON - * @param PWR_STOPEntry: specifies if STOP mode in entered with WFI or WFE instruction. - * This parameter can be one of the following values: - * @arg PWR_STOPEntry_WFI: enter STOP mode with WFI instruction - * @arg PWR_STOPEntry_WFE: enter STOP mode with WFE instruction - * @retval None - */ -void PWR_EnterSTOPMode(uint32_t PWR_Regulator, uint8_t PWR_STOPEntry) -{ - uint32_t tmpreg = 0; - - /* Check the parameters */ - assert_param(IS_PWR_REGULATOR(PWR_Regulator)); - assert_param(IS_PWR_STOP_ENTRY(PWR_STOPEntry)); - - /* Select the regulator state in STOP mode ---------------------------------*/ - tmpreg = PWR->CR; - /* Clear PDDS and LPDS bits */ - tmpreg &= CR_DS_MASK; - - /* Set LPDS, MRLVDS and LPLVDS bits according to PWR_Regulator value */ - tmpreg |= PWR_Regulator; - - /* Store the new value */ - PWR->CR = tmpreg; - - /* Set SLEEPDEEP bit of Cortex System Control Register */ - SCB->SCR |= SCB_SCR_SLEEPDEEP_Msk; - - /* Select STOP mode entry --------------------------------------------------*/ - if(PWR_STOPEntry == PWR_STOPEntry_WFI) - { - /* Request Wait For Interrupt */ - __WFI(); - } - else - { - /* Request Wait For Event */ - __WFE(); - } - /* Reset SLEEPDEEP bit of Cortex System Control Register */ - SCB->SCR &= (uint32_t)~((uint32_t)SCB_SCR_SLEEPDEEP_Msk); -} - -/** - * @brief Enters in Under-Drive STOP mode. - * - * @note This mode is only available for STM32F42xxx/STM3243xxx devices. - * - * @note This mode can be selected only when the Under-Drive is already active - * - * @note In Stop mode, all I/O pins keep the same state as in Run mode. - * @note When exiting Stop mode by issuing an interrupt or a wakeup event, - * the HSI RC oscillator is selected as system clock. - * @note When the voltage regulator operates in low power mode, an additional - * startup delay is incurred when waking up from Stop mode. - * By keeping the internal regulator ON during Stop mode, the consumption - * is higher although the startup time is reduced. - * - * @param PWR_Regulator: specifies the regulator state in STOP mode. - * This parameter can be one of the following values: - * @arg PWR_MainRegulator_UnderDrive_ON: Main Regulator in under-drive mode - * and Flash memory in power-down when the device is in Stop under-drive mode - * @arg PWR_LowPowerRegulator_UnderDrive_ON: Low Power Regulator in under-drive mode - * and Flash memory in power-down when the device is in Stop under-drive mode - * @param PWR_STOPEntry: specifies if STOP mode in entered with WFI or WFE instruction. - * This parameter can be one of the following values: - * @arg PWR_STOPEntry_WFI: enter STOP mode with WFI instruction - * @arg PWR_STOPEntry_WFE: enter STOP mode with WFE instruction - * @retval None - */ -void PWR_EnterUnderDriveSTOPMode(uint32_t PWR_Regulator, uint8_t PWR_STOPEntry) -{ - uint32_t tmpreg = 0; - - /* Check the parameters */ - assert_param(IS_PWR_REGULATOR_UNDERDRIVE(PWR_Regulator)); - assert_param(IS_PWR_STOP_ENTRY(PWR_STOPEntry)); - - /* Select the regulator state in STOP mode ---------------------------------*/ - tmpreg = PWR->CR; - /* Clear PDDS and LPDS bits */ - tmpreg &= CR_DS_MASK; - - /* Set LPDS, MRLUDS and LPLUDS bits according to PWR_Regulator value */ - tmpreg |= PWR_Regulator; - - /* Store the new value */ - PWR->CR = tmpreg; - - /* Set SLEEPDEEP bit of Cortex System Control Register */ - SCB->SCR |= SCB_SCR_SLEEPDEEP_Msk; - - /* Select STOP mode entry --------------------------------------------------*/ - if(PWR_STOPEntry == PWR_STOPEntry_WFI) - { - /* Request Wait For Interrupt */ - __WFI(); - } - else - { - /* Request Wait For Event */ - __WFE(); - } - /* Reset SLEEPDEEP bit of Cortex System Control Register */ - SCB->SCR &= (uint32_t)~((uint32_t)SCB_SCR_SLEEPDEEP_Msk); -} - -/** - * @brief Enters STANDBY mode. - * @note In Standby mode, all I/O pins are high impedance except for: - * - Reset pad (still available) - * - RTC_AF1 pin (PC13) if configured for tamper, time-stamp, RTC - * Alarm out, or RTC clock calibration out. - * - RTC_AF2 pin (PI8) if configured for tamper or time-stamp. - * - WKUP pin 1 (PA0) if enabled. - * @param None - * @retval None - */ -void PWR_EnterSTANDBYMode(void) -{ - /* Clear Wakeup flag */ - PWR->CR |= PWR_CR_CWUF; - - /* Select STANDBY mode */ - PWR->CR |= PWR_CR_PDDS; - - /* Set SLEEPDEEP bit of Cortex System Control Register */ - SCB->SCR |= SCB_SCR_SLEEPDEEP_Msk; - -/* This option is used to ensure that store operations are completed */ -#if defined ( __CC_ARM ) - __force_stores(); -#endif - /* Request Wait For Interrupt */ - __WFI(); -} - -/** - * @} - */ - -/** @defgroup PWR_Group7 Flags management functions - * @brief Flags management functions - * -@verbatim - =============================================================================== - ##### Flags management functions ##### - =============================================================================== - -@endverbatim - * @{ - */ - -/** - * @brief Checks whether the specified PWR flag is set or not. - * @param PWR_FLAG: specifies the flag to check. - * This parameter can be one of the following values: - * @arg PWR_FLAG_WU: Wake Up flag. This flag indicates that a wakeup event - * was received from the WKUP pin or from the RTC alarm (Alarm A - * or Alarm B), RTC Tamper event, RTC TimeStamp event or RTC Wakeup. - * An additional wakeup event is detected if the WKUP pin is enabled - * (by setting the EWUP bit) when the WKUP pin level is already high. - * @arg PWR_FLAG_SB: StandBy flag. This flag indicates that the system was - * resumed from StandBy mode. - * @arg PWR_FLAG_PVDO: PVD Output. This flag is valid only if PVD is enabled - * by the PWR_PVDCmd() function. The PVD is stopped by Standby mode - * For this reason, this bit is equal to 0 after Standby or reset - * until the PVDE bit is set. - * @arg PWR_FLAG_BRR: Backup regulator ready flag. This bit is not reset - * when the device wakes up from Standby mode or by a system reset - * or power reset. - * @arg PWR_FLAG_VOSRDY: This flag indicates that the Regulator voltage - * scaling output selection is ready. - * @arg PWR_FLAG_ODRDY: This flag indicates that the Over-drive mode - * is ready (STM32F42xxx/43xxx devices) - * @arg PWR_FLAG_ODSWRDY: This flag indicates that the Over-drive mode - * switcching is ready (STM32F42xxx/43xxx devices) - * @arg PWR_FLAG_UDRDY: This flag indicates that the Under-drive mode - * is enabled in Stop mode (STM32F42xxx/43xxx devices) - * @retval The new state of PWR_FLAG (SET or RESET). - */ -FlagStatus PWR_GetFlagStatus(uint32_t PWR_FLAG) -{ - FlagStatus bitstatus = RESET; - - /* Check the parameters */ - assert_param(IS_PWR_GET_FLAG(PWR_FLAG)); - - if ((PWR->CSR & PWR_FLAG) != (uint32_t)RESET) - { - bitstatus = SET; - } - else - { - bitstatus = RESET; - } - /* Return the flag status */ - return bitstatus; -} - -/** - * @brief Clears the PWR's pending flags. - * @param PWR_FLAG: specifies the flag to clear. - * This parameter can be one of the following values: - * @arg PWR_FLAG_WU: Wake Up flag - * @arg PWR_FLAG_SB: StandBy flag - * @arg PWR_FLAG_UDRDY: Under-drive ready flag (STM32F42xxx/43xxx devices) - * @retval None - */ -void PWR_ClearFlag(uint32_t PWR_FLAG) -{ - /* Check the parameters */ - assert_param(IS_PWR_CLEAR_FLAG(PWR_FLAG)); - -#if defined (STM32F427_437xx) || defined (STM32F429_439xx) - if (PWR_FLAG != PWR_FLAG_UDRDY) - { - PWR->CR |= PWR_FLAG << 2; - } - else - { - PWR->CSR |= PWR_FLAG_UDRDY; - } -#endif /* STM32F427_437xx || STM32F429_439xx */ - -#if defined (STM32F40_41xxx) || defined (STM32F401xx) - PWR->CR |= PWR_FLAG << 2; -#endif /* STM32F40_41xxx */ -} - -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/stm/lib/stm32f4xx_pwr.h b/stm/lib/stm32f4xx_pwr.h deleted file mode 100644 index 4ce588db6..000000000 --- a/stm/lib/stm32f4xx_pwr.h +++ /dev/null @@ -1,210 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f4xx_pwr.h - * @author MCD Application Team - * @version V1.3.0 - * @date 08-November-2013 - * @brief This file contains all the functions prototypes for the PWR firmware - * library. - ****************************************************************************** - * @attention - * - *

© COPYRIGHT 2013 STMicroelectronics

- * - * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License"); - * You may not use this file except in compliance with the License. - * You may obtain a copy of the License at: - * - * http://www.st.com/software_license_agreement_liberty_v2 - * - * Unless required by applicable law or agreed to in writing, software - * distributed under the License is distributed on an "AS IS" BASIS, - * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - * See the License for the specific language governing permissions and - * limitations under the License. - * - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F4xx_PWR_H -#define __STM32F4xx_PWR_H - -#ifdef __cplusplus - extern "C" { -#endif - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx.h" - -/** @addtogroup STM32F4xx_StdPeriph_Driver - * @{ - */ - -/** @addtogroup PWR - * @{ - */ - -/* Exported types ------------------------------------------------------------*/ -/* Exported constants --------------------------------------------------------*/ - -/** @defgroup PWR_Exported_Constants - * @{ - */ - -/** @defgroup PWR_PVD_detection_level - * @{ - */ -#define PWR_PVDLevel_0 PWR_CR_PLS_LEV0 -#define PWR_PVDLevel_1 PWR_CR_PLS_LEV1 -#define PWR_PVDLevel_2 PWR_CR_PLS_LEV2 -#define PWR_PVDLevel_3 PWR_CR_PLS_LEV3 -#define PWR_PVDLevel_4 PWR_CR_PLS_LEV4 -#define PWR_PVDLevel_5 PWR_CR_PLS_LEV5 -#define PWR_PVDLevel_6 PWR_CR_PLS_LEV6 -#define PWR_PVDLevel_7 PWR_CR_PLS_LEV7 - -#define IS_PWR_PVD_LEVEL(LEVEL) (((LEVEL) == PWR_PVDLevel_0) || ((LEVEL) == PWR_PVDLevel_1)|| \ - ((LEVEL) == PWR_PVDLevel_2) || ((LEVEL) == PWR_PVDLevel_3)|| \ - ((LEVEL) == PWR_PVDLevel_4) || ((LEVEL) == PWR_PVDLevel_5)|| \ - ((LEVEL) == PWR_PVDLevel_6) || ((LEVEL) == PWR_PVDLevel_7)) -/** - * @} - */ - - -/** @defgroup PWR_Regulator_state_in_STOP_mode - * @{ - */ -#define PWR_MainRegulator_ON ((uint32_t)0x00000000) -#define PWR_LowPowerRegulator_ON PWR_CR_LPDS - -/* --- PWR_Legacy ---*/ -#define PWR_Regulator_ON PWR_MainRegulator_ON -#define PWR_Regulator_LowPower PWR_LowPowerRegulator_ON - -#define IS_PWR_REGULATOR(REGULATOR) (((REGULATOR) == PWR_MainRegulator_ON) || \ - ((REGULATOR) == PWR_LowPowerRegulator_ON)) - -/** - * @} - */ - -/** @defgroup PWR_Regulator_state_in_UnderDrive_mode - * @{ - */ -#define PWR_MainRegulator_UnderDrive_ON PWR_CR_MRUDS -#define PWR_LowPowerRegulator_UnderDrive_ON ((uint32_t)(PWR_CR_LPDS | PWR_CR_LPUDS)) - -#define IS_PWR_REGULATOR_UNDERDRIVE(REGULATOR) (((REGULATOR) == PWR_MainRegulator_UnderDrive_ON) || \ - ((REGULATOR) == PWR_LowPowerRegulator_UnderDrive_ON)) - -/** - * @} - */ - -/** @defgroup PWR_STOP_mode_entry - * @{ - */ -#define PWR_STOPEntry_WFI ((uint8_t)0x01) -#define PWR_STOPEntry_WFE ((uint8_t)0x02) -#define IS_PWR_STOP_ENTRY(ENTRY) (((ENTRY) == PWR_STOPEntry_WFI) || ((ENTRY) == PWR_STOPEntry_WFE)) -/** - * @} - */ - -/** @defgroup PWR_Regulator_Voltage_Scale - * @{ - */ -#define PWR_Regulator_Voltage_Scale1 ((uint32_t)0x0000C000) -#define PWR_Regulator_Voltage_Scale2 ((uint32_t)0x00008000) -#define PWR_Regulator_Voltage_Scale3 ((uint32_t)0x00004000) -#define IS_PWR_REGULATOR_VOLTAGE(VOLTAGE) (((VOLTAGE) == PWR_Regulator_Voltage_Scale1) || \ - ((VOLTAGE) == PWR_Regulator_Voltage_Scale2) || \ - ((VOLTAGE) == PWR_Regulator_Voltage_Scale3)) -/** - * @} - */ - -/** @defgroup PWR_Flag - * @{ - */ -#define PWR_FLAG_WU PWR_CSR_WUF -#define PWR_FLAG_SB PWR_CSR_SBF -#define PWR_FLAG_PVDO PWR_CSR_PVDO -#define PWR_FLAG_BRR PWR_CSR_BRR -#define PWR_FLAG_VOSRDY PWR_CSR_VOSRDY -#define PWR_FLAG_ODRDY PWR_CSR_ODRDY -#define PWR_FLAG_ODSWRDY PWR_CSR_ODSWRDY -#define PWR_FLAG_UDRDY PWR_CSR_UDSWRDY - -/* --- FLAG Legacy ---*/ -#define PWR_FLAG_REGRDY PWR_FLAG_VOSRDY - -#define IS_PWR_GET_FLAG(FLAG) (((FLAG) == PWR_FLAG_WU) || ((FLAG) == PWR_FLAG_SB) || \ - ((FLAG) == PWR_FLAG_PVDO) || ((FLAG) == PWR_FLAG_BRR) || \ - ((FLAG) == PWR_FLAG_VOSRDY) || ((FLAG) == PWR_FLAG_ODRDY) || \ - ((FLAG) == PWR_FLAG_ODSWRDY) || ((FLAG) == PWR_FLAG_UDRDY)) - - -#define IS_PWR_CLEAR_FLAG(FLAG) (((FLAG) == PWR_FLAG_WU) || ((FLAG) == PWR_FLAG_SB) || \ - ((FLAG) == PWR_FLAG_UDRDY)) - -/** - * @} - */ - -/** - * @} - */ - -/* Exported macro ------------------------------------------------------------*/ -/* Exported functions --------------------------------------------------------*/ - -/* Function used to set the PWR configuration to the default reset state ******/ -void PWR_DeInit(void); - -/* Backup Domain Access function **********************************************/ -void PWR_BackupAccessCmd(FunctionalState NewState); - -/* PVD configuration functions ************************************************/ -void PWR_PVDLevelConfig(uint32_t PWR_PVDLevel); -void PWR_PVDCmd(FunctionalState NewState); - -/* WakeUp pins configuration functions ****************************************/ -void PWR_WakeUpPinCmd(FunctionalState NewState); - -/* Main and Backup Regulators configuration functions *************************/ -void PWR_BackupRegulatorCmd(FunctionalState NewState); -void PWR_MainRegulatorModeConfig(uint32_t PWR_Regulator_Voltage); -void PWR_OverDriveCmd(FunctionalState NewState); -void PWR_OverDriveSWCmd(FunctionalState NewState); -void PWR_UnderDriveCmd(FunctionalState NewState); - -/* FLASH Power Down configuration functions ***********************************/ -void PWR_FlashPowerDownCmd(FunctionalState NewState); - -/* Low Power modes configuration functions ************************************/ -void PWR_EnterSTOPMode(uint32_t PWR_Regulator, uint8_t PWR_STOPEntry); -void PWR_EnterUnderDriveSTOPMode(uint32_t PWR_Regulator, uint8_t PWR_STOPEntry); -void PWR_EnterSTANDBYMode(void); - -/* Flags management functions *************************************************/ -FlagStatus PWR_GetFlagStatus(uint32_t PWR_FLAG); -void PWR_ClearFlag(uint32_t PWR_FLAG); - -#ifdef __cplusplus -} -#endif - -#endif /* __STM32F4xx_PWR_H */ - -/** - * @} - */ - -/** - * @} - */ - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/stm/lib/stm32f4xx_rcc.c b/stm/lib/stm32f4xx_rcc.c deleted file mode 100644 index 4c5b47b3f..000000000 --- a/stm/lib/stm32f4xx_rcc.c +++ /dev/null @@ -1,2217 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f4xx_rcc.c - * @author MCD Application Team - * @version V1.3.0 - * @date 08-November-2013 - * @brief This file provides firmware functions to manage the following - * functionalities of the Reset and clock control (RCC) peripheral: - * + Internal/external clocks, PLL, CSS and MCO configuration - * + System, AHB and APB busses clocks configuration - * + Peripheral clocks configuration - * + Interrupts and flags management - * - @verbatim - =============================================================================== - ##### RCC specific features ##### - =============================================================================== - [..] - After reset the device is running from Internal High Speed oscillator - (HSI 16MHz) with Flash 0 wait state, Flash prefetch buffer, D-Cache - and I-Cache are disabled, and all peripherals are off except internal - SRAM, Flash and JTAG. - (+) There is no prescaler on High speed (AHB) and Low speed (APB) busses; - all peripherals mapped on these busses are running at HSI speed. - (+) The clock for all peripherals is switched off, except the SRAM and FLASH. - (+) All GPIOs are in input floating state, except the JTAG pins which - are assigned to be used for debug purpose. - [..] - Once the device started from reset, the user application has to: - (+) Configure the clock source to be used to drive the System clock - (if the application needs higher frequency/performance) - (+) Configure the System clock frequency and Flash settings - (+) Configure the AHB and APB busses prescalers - (+) Enable the clock for the peripheral(s) to be used - (+) Configure the clock source(s) for peripherals which clocks are not - derived from the System clock (I2S, RTC, ADC, USB OTG FS/SDIO/RNG) - @endverbatim - ****************************************************************************** - * @attention - * - *

© COPYRIGHT 2013 STMicroelectronics

- * - * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License"); - * You may not use this file except in compliance with the License. - * You may obtain a copy of the License at: - * - * http://www.st.com/software_license_agreement_liberty_v2 - * - * Unless required by applicable law or agreed to in writing, software - * distributed under the License is distributed on an "AS IS" BASIS, - * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - * See the License for the specific language governing permissions and - * limitations under the License. - * - ****************************************************************************** - */ - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx_rcc.h" - -/** @addtogroup STM32F4xx_StdPeriph_Driver - * @{ - */ - -/** @defgroup RCC - * @brief RCC driver modules - * @{ - */ - -/* Private typedef -----------------------------------------------------------*/ -/* Private define ------------------------------------------------------------*/ -/* ------------ RCC registers bit address in the alias region ----------- */ -#define RCC_OFFSET (RCC_BASE - PERIPH_BASE) -/* --- CR Register ---*/ -/* Alias word address of HSION bit */ -#define CR_OFFSET (RCC_OFFSET + 0x00) -#define HSION_BitNumber 0x00 -#define CR_HSION_BB (PERIPH_BB_BASE + (CR_OFFSET * 32) + (HSION_BitNumber * 4)) -/* Alias word address of CSSON bit */ -#define CSSON_BitNumber 0x13 -#define CR_CSSON_BB (PERIPH_BB_BASE + (CR_OFFSET * 32) + (CSSON_BitNumber * 4)) -/* Alias word address of PLLON bit */ -#define PLLON_BitNumber 0x18 -#define CR_PLLON_BB (PERIPH_BB_BASE + (CR_OFFSET * 32) + (PLLON_BitNumber * 4)) -/* Alias word address of PLLI2SON bit */ -#define PLLI2SON_BitNumber 0x1A -#define CR_PLLI2SON_BB (PERIPH_BB_BASE + (CR_OFFSET * 32) + (PLLI2SON_BitNumber * 4)) - -/* Alias word address of PLLSAION bit */ -#define PLLSAION_BitNumber 0x1C -#define CR_PLLSAION_BB (PERIPH_BB_BASE + (CR_OFFSET * 32) + (PLLSAION_BitNumber * 4)) - -/* --- CFGR Register ---*/ -/* Alias word address of I2SSRC bit */ -#define CFGR_OFFSET (RCC_OFFSET + 0x08) -#define I2SSRC_BitNumber 0x17 -#define CFGR_I2SSRC_BB (PERIPH_BB_BASE + (CFGR_OFFSET * 32) + (I2SSRC_BitNumber * 4)) - -/* --- BDCR Register ---*/ -/* Alias word address of RTCEN bit */ -#define BDCR_OFFSET (RCC_OFFSET + 0x70) -#define RTCEN_BitNumber 0x0F -#define BDCR_RTCEN_BB (PERIPH_BB_BASE + (BDCR_OFFSET * 32) + (RTCEN_BitNumber * 4)) -/* Alias word address of BDRST bit */ -#define BDRST_BitNumber 0x10 -#define BDCR_BDRST_BB (PERIPH_BB_BASE + (BDCR_OFFSET * 32) + (BDRST_BitNumber * 4)) - -/* --- CSR Register ---*/ -/* Alias word address of LSION bit */ -#define CSR_OFFSET (RCC_OFFSET + 0x74) -#define LSION_BitNumber 0x00 -#define CSR_LSION_BB (PERIPH_BB_BASE + (CSR_OFFSET * 32) + (LSION_BitNumber * 4)) - -/* --- DCKCFGR Register ---*/ -/* Alias word address of TIMPRE bit */ -#define DCKCFGR_OFFSET (RCC_OFFSET + 0x8C) -#define TIMPRE_BitNumber 0x18 -#define DCKCFGR_TIMPRE_BB (PERIPH_BB_BASE + (DCKCFGR_OFFSET * 32) + (TIMPRE_BitNumber * 4)) -/* ---------------------- RCC registers bit mask ------------------------ */ -/* CFGR register bit mask */ -#define CFGR_MCO2_RESET_MASK ((uint32_t)0x07FFFFFF) -#define CFGR_MCO1_RESET_MASK ((uint32_t)0xF89FFFFF) - -/* RCC Flag Mask */ -#define FLAG_MASK ((uint8_t)0x1F) - -/* CR register byte 3 (Bits[23:16]) base address */ -#define CR_BYTE3_ADDRESS ((uint32_t)0x40023802) - -/* CIR register byte 2 (Bits[15:8]) base address */ -#define CIR_BYTE2_ADDRESS ((uint32_t)(RCC_BASE + 0x0C + 0x01)) - -/* CIR register byte 3 (Bits[23:16]) base address */ -#define CIR_BYTE3_ADDRESS ((uint32_t)(RCC_BASE + 0x0C + 0x02)) - -/* BDCR register base address */ -#define BDCR_ADDRESS (PERIPH_BASE + BDCR_OFFSET) - -/* Private macro -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -static __I uint8_t APBAHBPrescTable[16] = {0, 0, 0, 0, 1, 2, 3, 4, 1, 2, 3, 4, 6, 7, 8, 9}; - -/* Private function prototypes -----------------------------------------------*/ -/* Private functions ---------------------------------------------------------*/ - -/** @defgroup RCC_Private_Functions - * @{ - */ - -/** @defgroup RCC_Group1 Internal and external clocks, PLL, CSS and MCO configuration functions - * @brief Internal and external clocks, PLL, CSS and MCO configuration functions - * -@verbatim - =================================================================================== - ##### Internal and external clocks, PLL, CSS and MCO configuration functions ##### - =================================================================================== - [..] - This section provide functions allowing to configure the internal/external clocks, - PLLs, CSS and MCO pins. - - (#) HSI (high-speed internal), 16 MHz factory-trimmed RC used directly or through - the PLL as System clock source. - - (#) LSI (low-speed internal), 32 KHz low consumption RC used as IWDG and/or RTC - clock source. - - (#) HSE (high-speed external), 4 to 26 MHz crystal oscillator used directly or - through the PLL as System clock source. Can be used also as RTC clock source. - - (#) LSE (low-speed external), 32 KHz oscillator used as RTC clock source. - - (#) PLL (clocked by HSI or HSE), featuring two different output clocks: - (++) The first output is used to generate the high speed system clock (up to 168 MHz) - (++) The second output is used to generate the clock for the USB OTG FS (48 MHz), - the random analog generator (<=48 MHz) and the SDIO (<= 48 MHz). - - (#) PLLI2S (clocked by HSI or HSE), used to generate an accurate clock to achieve - high-quality audio performance on the I2S interface or SAI interface in case - of STM32F429x/439x devices. - - (#) PLLSAI clocked by (HSI or HSE), used to generate an accurate clock to SAI - interface and LCD TFT controller available only for STM32F42xxx/43xxx devices. - - (#) CSS (Clock security system), once enable and if a HSE clock failure occurs - (HSE used directly or through PLL as System clock source), the System clock - is automatically switched to HSI and an interrupt is generated if enabled. - The interrupt is linked to the Cortex-M4 NMI (Non-Maskable Interrupt) - exception vector. - - (#) MCO1 (microcontroller clock output), used to output HSI, LSE, HSE or PLL - clock (through a configurable prescaler) on PA8 pin. - - (#) MCO2 (microcontroller clock output), used to output HSE, PLL, SYSCLK or PLLI2S - clock (through a configurable prescaler) on PC9 pin. - @endverbatim - * @{ - */ - -/** - * @brief Resets the RCC clock configuration to the default reset state. - * @note The default reset state of the clock configuration is given below: - * - HSI ON and used as system clock source - * - HSE, PLL and PLLI2S OFF - * - AHB, APB1 and APB2 prescaler set to 1. - * - CSS, MCO1 and MCO2 OFF - * - All interrupts disabled - * @note This function doesn't modify the configuration of the - * - Peripheral clocks - * - LSI, LSE and RTC clocks - * @param None - * @retval None - */ -void RCC_DeInit(void) -{ - /* Set HSION bit */ - RCC->CR |= (uint32_t)0x00000001; - - /* Reset CFGR register */ - RCC->CFGR = 0x00000000; - - /* Reset HSEON, CSSON, PLLON, PLLI2S and PLLSAI(STM32F42/43xxx devices) bits */ - RCC->CR &= (uint32_t)0xEAF6FFFF; - - /* Reset PLLCFGR register */ - RCC->PLLCFGR = 0x24003010; - - /* Reset PLLI2SCFGR register */ - RCC->PLLI2SCFGR = 0x20003000; - - /* Reset PLLSAICFGR register, only available for STM32F42/43xxx devices */ - RCC->PLLSAICFGR = 0x24003000; - - /* Reset HSEBYP bit */ - RCC->CR &= (uint32_t)0xFFFBFFFF; - - /* Disable all interrupts */ - RCC->CIR = 0x00000000; - - /* Disable Timers clock prescalers selection, only available for STM32F42/43xxx devices */ - RCC->DCKCFGR = 0x00000000; - -} - -/** - * @brief Configures the External High Speed oscillator (HSE). - * @note After enabling the HSE (RCC_HSE_ON or RCC_HSE_Bypass), the application - * software should wait on HSERDY flag to be set indicating that HSE clock - * is stable and can be used to clock the PLL and/or system clock. - * @note HSE state can not be changed if it is used directly or through the - * PLL as system clock. In this case, you have to select another source - * of the system clock then change the HSE state (ex. disable it). - * @note The HSE is stopped by hardware when entering STOP and STANDBY modes. - * @note This function reset the CSSON bit, so if the Clock security system(CSS) - * was previously enabled you have to enable it again after calling this - * function. - * @param RCC_HSE: specifies the new state of the HSE. - * This parameter can be one of the following values: - * @arg RCC_HSE_OFF: turn OFF the HSE oscillator, HSERDY flag goes low after - * 6 HSE oscillator clock cycles. - * @arg RCC_HSE_ON: turn ON the HSE oscillator - * @arg RCC_HSE_Bypass: HSE oscillator bypassed with external clock - * @retval None - */ -void RCC_HSEConfig(uint8_t RCC_HSE) -{ - /* Check the parameters */ - assert_param(IS_RCC_HSE(RCC_HSE)); - - /* Reset HSEON and HSEBYP bits before configuring the HSE ------------------*/ - *(__IO uint8_t *) CR_BYTE3_ADDRESS = RCC_HSE_OFF; - - /* Set the new HSE configuration -------------------------------------------*/ - *(__IO uint8_t *) CR_BYTE3_ADDRESS = RCC_HSE; -} - -/** - * @brief Waits for HSE start-up. - * @note This functions waits on HSERDY flag to be set and return SUCCESS if - * this flag is set, otherwise returns ERROR if the timeout is reached - * and this flag is not set. The timeout value is defined by the constant - * HSE_STARTUP_TIMEOUT in stm32f4xx.h file. You can tailor it depending - * on the HSE crystal used in your application. - * @param None - * @retval An ErrorStatus enumeration value: - * - SUCCESS: HSE oscillator is stable and ready to use - * - ERROR: HSE oscillator not yet ready - */ -ErrorStatus RCC_WaitForHSEStartUp(void) -{ - __IO uint32_t startupcounter = 0; - ErrorStatus status = ERROR; - FlagStatus hsestatus = RESET; - /* Wait till HSE is ready and if Time out is reached exit */ - do - { - hsestatus = RCC_GetFlagStatus(RCC_FLAG_HSERDY); - startupcounter++; - } while((startupcounter != HSE_STARTUP_TIMEOUT) && (hsestatus == RESET)); - - if (RCC_GetFlagStatus(RCC_FLAG_HSERDY) != RESET) - { - status = SUCCESS; - } - else - { - status = ERROR; - } - return (status); -} - -/** - * @brief Adjusts the Internal High Speed oscillator (HSI) calibration value. - * @note The calibration is used to compensate for the variations in voltage - * and temperature that influence the frequency of the internal HSI RC. - * @param HSICalibrationValue: specifies the calibration trimming value. - * This parameter must be a number between 0 and 0x1F. - * @retval None - */ -void RCC_AdjustHSICalibrationValue(uint8_t HSICalibrationValue) -{ - uint32_t tmpreg = 0; - /* Check the parameters */ - assert_param(IS_RCC_CALIBRATION_VALUE(HSICalibrationValue)); - - tmpreg = RCC->CR; - - /* Clear HSITRIM[4:0] bits */ - tmpreg &= ~RCC_CR_HSITRIM; - - /* Set the HSITRIM[4:0] bits according to HSICalibrationValue value */ - tmpreg |= (uint32_t)HSICalibrationValue << 3; - - /* Store the new value */ - RCC->CR = tmpreg; -} - -/** - * @brief Enables or disables the Internal High Speed oscillator (HSI). - * @note The HSI is stopped by hardware when entering STOP and STANDBY modes. - * It is used (enabled by hardware) as system clock source after startup - * from Reset, wakeup from STOP and STANDBY mode, or in case of failure - * of the HSE used directly or indirectly as system clock (if the Clock - * Security System CSS is enabled). - * @note HSI can not be stopped if it is used as system clock source. In this case, - * you have to select another source of the system clock then stop the HSI. - * @note After enabling the HSI, the application software should wait on HSIRDY - * flag to be set indicating that HSI clock is stable and can be used as - * system clock source. - * @param NewState: new state of the HSI. - * This parameter can be: ENABLE or DISABLE. - * @note When the HSI is stopped, HSIRDY flag goes low after 6 HSI oscillator - * clock cycles. - * @retval None - */ -void RCC_HSICmd(FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_FUNCTIONAL_STATE(NewState)); - - *(__IO uint32_t *) CR_HSION_BB = (uint32_t)NewState; -} - -/** - * @brief Configures the External Low Speed oscillator (LSE). - * @note As the LSE is in the Backup domain and write access is denied to - * this domain after reset, you have to enable write access using - * PWR_BackupAccessCmd(ENABLE) function before to configure the LSE - * (to be done once after reset). - * @note After enabling the LSE (RCC_LSE_ON or RCC_LSE_Bypass), the application - * software should wait on LSERDY flag to be set indicating that LSE clock - * is stable and can be used to clock the RTC. - * @param RCC_LSE: specifies the new state of the LSE. - * This parameter can be one of the following values: - * @arg RCC_LSE_OFF: turn OFF the LSE oscillator, LSERDY flag goes low after - * 6 LSE oscillator clock cycles. - * @arg RCC_LSE_ON: turn ON the LSE oscillator - * @arg RCC_LSE_Bypass: LSE oscillator bypassed with external clock - * @retval None - */ -void RCC_LSEConfig(uint8_t RCC_LSE) -{ - /* Check the parameters */ - assert_param(IS_RCC_LSE(RCC_LSE)); - - /* Reset LSEON and LSEBYP bits before configuring the LSE ------------------*/ - /* Reset LSEON bit */ - *(__IO uint8_t *) BDCR_ADDRESS = RCC_LSE_OFF; - - /* Reset LSEBYP bit */ - *(__IO uint8_t *) BDCR_ADDRESS = RCC_LSE_OFF; - - /* Configure LSE (RCC_LSE_OFF is already covered by the code section above) */ - switch (RCC_LSE) - { - case RCC_LSE_ON: - /* Set LSEON bit */ - *(__IO uint8_t *) BDCR_ADDRESS = RCC_LSE_ON; - break; - case RCC_LSE_Bypass: - /* Set LSEBYP and LSEON bits */ - *(__IO uint8_t *) BDCR_ADDRESS = RCC_LSE_Bypass | RCC_LSE_ON; - break; - default: - break; - } -} - -/** - * @brief Enables or disables the Internal Low Speed oscillator (LSI). - * @note After enabling the LSI, the application software should wait on - * LSIRDY flag to be set indicating that LSI clock is stable and can - * be used to clock the IWDG and/or the RTC. - * @note LSI can not be disabled if the IWDG is running. - * @param NewState: new state of the LSI. - * This parameter can be: ENABLE or DISABLE. - * @note When the LSI is stopped, LSIRDY flag goes low after 6 LSI oscillator - * clock cycles. - * @retval None - */ -void RCC_LSICmd(FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_FUNCTIONAL_STATE(NewState)); - - *(__IO uint32_t *) CSR_LSION_BB = (uint32_t)NewState; -} - -/** - * @brief Configures the main PLL clock source, multiplication and division factors. - * @note This function must be used only when the main PLL is disabled. - * - * @param RCC_PLLSource: specifies the PLL entry clock source. - * This parameter can be one of the following values: - * @arg RCC_PLLSource_HSI: HSI oscillator clock selected as PLL clock entry - * @arg RCC_PLLSource_HSE: HSE oscillator clock selected as PLL clock entry - * @note This clock source (RCC_PLLSource) is common for the main PLL and PLLI2S. - * - * @param PLLM: specifies the division factor for PLL VCO input clock - * This parameter must be a number between 0 and 63. - * @note You have to set the PLLM parameter correctly to ensure that the VCO input - * frequency ranges from 1 to 2 MHz. It is recommended to select a frequency - * of 2 MHz to limit PLL jitter. - * - * @param PLLN: specifies the multiplication factor for PLL VCO output clock - * This parameter must be a number between 192 and 432. - * @note You have to set the PLLN parameter correctly to ensure that the VCO - * output frequency is between 192 and 432 MHz. - * - * @param PLLP: specifies the division factor for main system clock (SYSCLK) - * This parameter must be a number in the range {2, 4, 6, or 8}. - * @note You have to set the PLLP parameter correctly to not exceed 168 MHz on - * the System clock frequency. - * - * @param PLLQ: specifies the division factor for OTG FS, SDIO and RNG clocks - * This parameter must be a number between 4 and 15. - * @note If the USB OTG FS is used in your application, you have to set the - * PLLQ parameter correctly to have 48 MHz clock for the USB. However, - * the SDIO and RNG need a frequency lower than or equal to 48 MHz to work - * correctly. - * - * @retval None - */ -void RCC_PLLConfig(uint32_t RCC_PLLSource, uint32_t PLLM, uint32_t PLLN, uint32_t PLLP, uint32_t PLLQ) -{ - /* Check the parameters */ - assert_param(IS_RCC_PLL_SOURCE(RCC_PLLSource)); - assert_param(IS_RCC_PLLM_VALUE(PLLM)); - assert_param(IS_RCC_PLLN_VALUE(PLLN)); - assert_param(IS_RCC_PLLP_VALUE(PLLP)); - assert_param(IS_RCC_PLLQ_VALUE(PLLQ)); - - RCC->PLLCFGR = PLLM | (PLLN << 6) | (((PLLP >> 1) -1) << 16) | (RCC_PLLSource) | - (PLLQ << 24); -} - -/** - * @brief Enables or disables the main PLL. - * @note After enabling the main PLL, the application software should wait on - * PLLRDY flag to be set indicating that PLL clock is stable and can - * be used as system clock source. - * @note The main PLL can not be disabled if it is used as system clock source - * @note The main PLL is disabled by hardware when entering STOP and STANDBY modes. - * @param NewState: new state of the main PLL. This parameter can be: ENABLE or DISABLE. - * @retval None - */ -void RCC_PLLCmd(FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_FUNCTIONAL_STATE(NewState)); - *(__IO uint32_t *) CR_PLLON_BB = (uint32_t)NewState; -} - -#if defined (STM32F40_41xxx) || defined (STM32F401xx) -/** - * @brief Configures the PLLI2S clock multiplication and division factors. - * - * @note This function can be used only for STM32F405xx/407xx, STM32F415xx/417xx - * or STM32F401xx devices. - * - * @note This function must be used only when the PLLI2S is disabled. - * @note PLLI2S clock source is common with the main PLL (configured in - * RCC_PLLConfig function ) - * - * @param PLLI2SN: specifies the multiplication factor for PLLI2S VCO output clock - * This parameter must be a number between 192 and 432. - * @note You have to set the PLLI2SN parameter correctly to ensure that the VCO - * output frequency is between 192 and 432 MHz. - * - * @param PLLI2SR: specifies the division factor for I2S clock - * This parameter must be a number between 2 and 7. - * @note You have to set the PLLI2SR parameter correctly to not exceed 192 MHz - * on the I2S clock frequency. - * - * @retval None - */ -void RCC_PLLI2SConfig(uint32_t PLLI2SN, uint32_t PLLI2SR) -{ - /* Check the parameters */ - assert_param(IS_RCC_PLLI2SN_VALUE(PLLI2SN)); - assert_param(IS_RCC_PLLI2SR_VALUE(PLLI2SR)); - - RCC->PLLI2SCFGR = (PLLI2SN << 6) | (PLLI2SR << 28); -} -#endif /* STM32F40_41xxx || STM32F401xx */ - -#if defined (STM32F427_437xx) || defined (STM32F429_439xx) -/** - * @brief Configures the PLLI2S clock multiplication and division factors. - * - * @note This function can be used only for STM32F42xxx/43xxx devices - * - * @note This function must be used only when the PLLI2S is disabled. - * @note PLLI2S clock source is common with the main PLL (configured in - * RCC_PLLConfig function ) - * - * @param PLLI2SN: specifies the multiplication factor for PLLI2S VCO output clock - * This parameter must be a number between 192 and 432. - * @note You have to set the PLLI2SN parameter correctly to ensure that the VCO - * output frequency is between 192 and 432 MHz. - * - * @param PLLI2SQ: specifies the division factor for SAI1 clock - * This parameter must be a number between 2 and 15. - * - * @param PLLI2SR: specifies the division factor for I2S clock - * This parameter must be a number between 2 and 7. - * @note You have to set the PLLI2SR parameter correctly to not exceed 192 MHz - * on the I2S clock frequency. - * @note the PLLI2SR parameter is only available with STM32F42xxx/43xxx devices. - * - * @retval None - */ -void RCC_PLLI2SConfig(uint32_t PLLI2SN, uint32_t PLLI2SQ, uint32_t PLLI2SR) -{ - /* Check the parameters */ - assert_param(IS_RCC_PLLI2SN_VALUE(PLLI2SN)); - assert_param(IS_RCC_PLLI2SQ_VALUE(PLLI2SQ)); - assert_param(IS_RCC_PLLI2SR_VALUE(PLLI2SR)); - - RCC->PLLI2SCFGR = (PLLI2SN << 6) | (PLLI2SQ << 24) | (PLLI2SR << 28); -} -#endif /* STM32F427_437xx || STM32F429_439xx */ - -/** - * @brief Enables or disables the PLLI2S. - * @note The PLLI2S is disabled by hardware when entering STOP and STANDBY modes. - * @param NewState: new state of the PLLI2S. This parameter can be: ENABLE or DISABLE. - * @retval None - */ -void RCC_PLLI2SCmd(FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_FUNCTIONAL_STATE(NewState)); - *(__IO uint32_t *) CR_PLLI2SON_BB = (uint32_t)NewState; -} - -/** - * @brief Configures the PLLSAI clock multiplication and division factors. - * - * @note This function can be used only for STM32F42xxx/43xxx devices - * - * @note This function must be used only when the PLLSAI is disabled. - * @note PLLSAI clock source is common with the main PLL (configured in - * RCC_PLLConfig function ) - * - * @param PLLSAIN: specifies the multiplication factor for PLLSAI VCO output clock - * This parameter must be a number between 192 and 432. - * @note You have to set the PLLSAIN parameter correctly to ensure that the VCO - * output frequency is between 192 and 432 MHz. - * - * @param PLLSAIQ: specifies the division factor for SAI1 clock - * This parameter must be a number between 2 and 15. - * - * @param PLLSAIR: specifies the division factor for LTDC clock - * This parameter must be a number between 2 and 7. - * - * @retval None - */ -void RCC_PLLSAIConfig(uint32_t PLLSAIN, uint32_t PLLSAIQ, uint32_t PLLSAIR) -{ - /* Check the parameters */ - assert_param(IS_RCC_PLLSAIN_VALUE(PLLSAIN)); - assert_param(IS_RCC_PLLSAIR_VALUE(PLLSAIR)); - - RCC->PLLSAICFGR = (PLLSAIN << 6) | (PLLSAIQ << 24) | (PLLSAIR << 28); -} - -/** - * @brief Enables or disables the PLLSAI. - * - * @note This function can be used only for STM32F42xxx/43xxx devices - * - * @note The PLLSAI is disabled by hardware when entering STOP and STANDBY modes. - * @param NewState: new state of the PLLSAI. This parameter can be: ENABLE or DISABLE. - * @retval None - */ -void RCC_PLLSAICmd(FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_FUNCTIONAL_STATE(NewState)); - *(__IO uint32_t *) CR_PLLSAION_BB = (uint32_t)NewState; -} - -/** - * @brief Enables or disables the Clock Security System. - * @note If a failure is detected on the HSE oscillator clock, this oscillator - * is automatically disabled and an interrupt is generated to inform the - * software about the failure (Clock Security System Interrupt, CSSI), - * allowing the MCU to perform rescue operations. The CSSI is linked to - * the Cortex-M4 NMI (Non-Maskable Interrupt) exception vector. - * @param NewState: new state of the Clock Security System. - * This parameter can be: ENABLE or DISABLE. - * @retval None - */ -void RCC_ClockSecuritySystemCmd(FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_FUNCTIONAL_STATE(NewState)); - *(__IO uint32_t *) CR_CSSON_BB = (uint32_t)NewState; -} - -/** - * @brief Selects the clock source to output on MCO1 pin(PA8). - * @note PA8 should be configured in alternate function mode. - * @param RCC_MCO1Source: specifies the clock source to output. - * This parameter can be one of the following values: - * @arg RCC_MCO1Source_HSI: HSI clock selected as MCO1 source - * @arg RCC_MCO1Source_LSE: LSE clock selected as MCO1 source - * @arg RCC_MCO1Source_HSE: HSE clock selected as MCO1 source - * @arg RCC_MCO1Source_PLLCLK: main PLL clock selected as MCO1 source - * @param RCC_MCO1Div: specifies the MCO1 prescaler. - * This parameter can be one of the following values: - * @arg RCC_MCO1Div_1: no division applied to MCO1 clock - * @arg RCC_MCO1Div_2: division by 2 applied to MCO1 clock - * @arg RCC_MCO1Div_3: division by 3 applied to MCO1 clock - * @arg RCC_MCO1Div_4: division by 4 applied to MCO1 clock - * @arg RCC_MCO1Div_5: division by 5 applied to MCO1 clock - * @retval None - */ -void RCC_MCO1Config(uint32_t RCC_MCO1Source, uint32_t RCC_MCO1Div) -{ - uint32_t tmpreg = 0; - - /* Check the parameters */ - assert_param(IS_RCC_MCO1SOURCE(RCC_MCO1Source)); - assert_param(IS_RCC_MCO1DIV(RCC_MCO1Div)); - - tmpreg = RCC->CFGR; - - /* Clear MCO1[1:0] and MCO1PRE[2:0] bits */ - tmpreg &= CFGR_MCO1_RESET_MASK; - - /* Select MCO1 clock source and prescaler */ - tmpreg |= RCC_MCO1Source | RCC_MCO1Div; - - /* Store the new value */ - RCC->CFGR = tmpreg; -} - -/** - * @brief Selects the clock source to output on MCO2 pin(PC9). - * @note PC9 should be configured in alternate function mode. - * @param RCC_MCO2Source: specifies the clock source to output. - * This parameter can be one of the following values: - * @arg RCC_MCO2Source_SYSCLK: System clock (SYSCLK) selected as MCO2 source - * @arg RCC_MCO2Source_PLLI2SCLK: PLLI2S clock selected as MCO2 source - * @arg RCC_MCO2Source_HSE: HSE clock selected as MCO2 source - * @arg RCC_MCO2Source_PLLCLK: main PLL clock selected as MCO2 source - * @param RCC_MCO2Div: specifies the MCO2 prescaler. - * This parameter can be one of the following values: - * @arg RCC_MCO2Div_1: no division applied to MCO2 clock - * @arg RCC_MCO2Div_2: division by 2 applied to MCO2 clock - * @arg RCC_MCO2Div_3: division by 3 applied to MCO2 clock - * @arg RCC_MCO2Div_4: division by 4 applied to MCO2 clock - * @arg RCC_MCO2Div_5: division by 5 applied to MCO2 clock - * @retval None - */ -void RCC_MCO2Config(uint32_t RCC_MCO2Source, uint32_t RCC_MCO2Div) -{ - uint32_t tmpreg = 0; - - /* Check the parameters */ - assert_param(IS_RCC_MCO2SOURCE(RCC_MCO2Source)); - assert_param(IS_RCC_MCO2DIV(RCC_MCO2Div)); - - tmpreg = RCC->CFGR; - - /* Clear MCO2 and MCO2PRE[2:0] bits */ - tmpreg &= CFGR_MCO2_RESET_MASK; - - /* Select MCO2 clock source and prescaler */ - tmpreg |= RCC_MCO2Source | RCC_MCO2Div; - - /* Store the new value */ - RCC->CFGR = tmpreg; -} - -/** - * @} - */ - -/** @defgroup RCC_Group2 System AHB and APB busses clocks configuration functions - * @brief System, AHB and APB busses clocks configuration functions - * -@verbatim - =============================================================================== - ##### System, AHB and APB busses clocks configuration functions ##### - =============================================================================== - [..] - This section provide functions allowing to configure the System, AHB, APB1 and - APB2 busses clocks. - - (#) Several clock sources can be used to drive the System clock (SYSCLK): HSI, - HSE and PLL. - The AHB clock (HCLK) is derived from System clock through configurable - prescaler and used to clock the CPU, memory and peripherals mapped - on AHB bus (DMA, GPIO...). APB1 (PCLK1) and APB2 (PCLK2) clocks are derived - from AHB clock through configurable prescalers and used to clock - the peripherals mapped on these busses. You can use - "RCC_GetClocksFreq()" function to retrieve the frequencies of these clocks. - - -@- All the peripheral clocks are derived from the System clock (SYSCLK) except: - (+@) I2S: the I2S clock can be derived either from a specific PLL (PLLI2S) or - from an external clock mapped on the I2S_CKIN pin. - You have to use RCC_I2SCLKConfig() function to configure this clock. - (+@) RTC: the RTC clock can be derived either from the LSI, LSE or HSE clock - divided by 2 to 31. You have to use RCC_RTCCLKConfig() and RCC_RTCCLKCmd() - functions to configure this clock. - (+@) USB OTG FS, SDIO and RTC: USB OTG FS require a frequency equal to 48 MHz - to work correctly, while the SDIO require a frequency equal or lower than - to 48. This clock is derived of the main PLL through PLLQ divider. - (+@) IWDG clock which is always the LSI clock. - - (#) For STM32F405xx/407xx and STM32F415xx/417xx devices, the maximum frequency - of the SYSCLK and HCLK is 168 MHz, PCLK2 84 MHz and PCLK1 42 MHz. Depending - on the device voltage range, the maximum frequency should be adapted accordingly: - +-------------------------------------------------------------------------------------+ - | Latency | HCLK clock frequency (MHz) | - | |---------------------------------------------------------------------| - | | voltage range | voltage range | voltage range | voltage range | - | | 2.7 V - 3.6 V | 2.4 V - 2.7 V | 2.1 V - 2.4 V | 1.8 V - 2.1 V | - |---------------|----------------|----------------|-----------------|-----------------| - |0WS(1CPU cycle)|0 < HCLK <= 30 |0 < HCLK <= 24 |0 < HCLK <= 22 |0 < HCLK <= 20 | - |---------------|----------------|----------------|-----------------|-----------------| - |1WS(2CPU cycle)|30 < HCLK <= 60 |24 < HCLK <= 48 |22 < HCLK <= 44 |20 < HCLK <= 40 | - |---------------|----------------|----------------|-----------------|-----------------| - |2WS(3CPU cycle)|60 < HCLK <= 90 |48 < HCLK <= 72 |44 < HCLK <= 66 |40 < HCLK <= 60 | - |---------------|----------------|----------------|-----------------|-----------------| - |3WS(4CPU cycle)|90 < HCLK <= 120|72 < HCLK <= 96 |66 < HCLK <= 88 |60 < HCLK <= 80 | - |---------------|----------------|----------------|-----------------|-----------------| - |4WS(5CPU cycle)|120< HCLK <= 150|96 < HCLK <= 120|88 < HCLK <= 110 |80 < HCLK <= 100 | - |---------------|----------------|----------------|-----------------|-----------------| - |5WS(6CPU cycle)|150< HCLK <= 168|120< HCLK <= 144|110 < HCLK <= 132|100 < HCLK <= 120| - |---------------|----------------|----------------|-----------------|-----------------| - |6WS(7CPU cycle)| NA |144< HCLK <= 168|132 < HCLK <= 154|120 < HCLK <= 140| - |---------------|----------------|----------------|-----------------|-----------------| - |7WS(8CPU cycle)| NA | NA |154 < HCLK <= 168|140 < HCLK <= 160| - +---------------|----------------|----------------|-----------------|-----------------+ - (#) For STM32F42xxx/43xxx devices, the maximum frequency of the SYSCLK and HCLK is 180 MHz, - PCLK2 90 MHz and PCLK1 45 MHz. Depending on the device voltage range, the maximum - frequency should be adapted accordingly: - +-------------------------------------------------------------------------------------+ - | Latency | HCLK clock frequency (MHz) | - | |---------------------------------------------------------------------| - | | voltage range | voltage range | voltage range | voltage range | - | | 2.7 V - 3.6 V | 2.4 V - 2.7 V | 2.1 V - 2.4 V | 1.8 V - 2.1 V | - |---------------|----------------|----------------|-----------------|-----------------| - |0WS(1CPU cycle)|0 < HCLK <= 30 |0 < HCLK <= 24 |0 < HCLK <= 22 |0 < HCLK <= 20 | - |---------------|----------------|----------------|-----------------|-----------------| - |1WS(2CPU cycle)|30 < HCLK <= 60 |24 < HCLK <= 48 |22 < HCLK <= 44 |20 < HCLK <= 40 | - |---------------|----------------|----------------|-----------------|-----------------| - |2WS(3CPU cycle)|60 < HCLK <= 90 |48 < HCLK <= 72 |44 < HCLK <= 66 |40 < HCLK <= 60 | - |---------------|----------------|----------------|-----------------|-----------------| - |3WS(4CPU cycle)|90 < HCLK <= 120|72 < HCLK <= 96 |66 < HCLK <= 88 |60 < HCLK <= 80 | - |---------------|----------------|----------------|-----------------|-----------------| - |4WS(5CPU cycle)|120< HCLK <= 150|96 < HCLK <= 120|88 < HCLK <= 110 |80 < HCLK <= 100 | - |---------------|----------------|----------------|-----------------|-----------------| - |5WS(6CPU cycle)|120< HCLK <= 180|120< HCLK <= 144|110 < HCLK <= 132|100 < HCLK <= 120| - |---------------|----------------|----------------|-----------------|-----------------| - |6WS(7CPU cycle)| NA |144< HCLK <= 168|132 < HCLK <= 154|120 < HCLK <= 140| - |---------------|----------------|----------------|-----------------|-----------------| - |7WS(8CPU cycle)| NA |168< HCLK <= 180|154 < HCLK <= 176|140 < HCLK <= 160| - |---------------|----------------|----------------|-----------------|-----------------| - |8WS(9CPU cycle)| NA | NA |176 < HCLK <= 180|160 < HCLK <= 168| - +-------------------------------------------------------------------------------------+ - - (#) For STM32F401xx devices, the maximum frequency of the SYSCLK and HCLK is 84 MHz, - PCLK2 84 MHz and PCLK1 42 MHz. Depending on the device voltage range, the maximum - frequency should be adapted accordingly: - +-------------------------------------------------------------------------------------+ - | Latency | HCLK clock frequency (MHz) | - | |---------------------------------------------------------------------| - | | voltage range | voltage range | voltage range | voltage range | - | | 2.7 V - 3.6 V | 2.4 V - 2.7 V | 2.1 V - 2.4 V | 1.8 V - 2.1 V | - |---------------|----------------|----------------|-----------------|-----------------| - |0WS(1CPU cycle)|0 < HCLK <= 30 |0 < HCLK <= 24 |0 < HCLK <= 22 |0 < HCLK <= 20 | - |---------------|----------------|----------------|-----------------|-----------------| - |1WS(2CPU cycle)|30 < HCLK <= 60 |24 < HCLK <= 48 |22 < HCLK <= 44 |20 < HCLK <= 40 | - |---------------|----------------|----------------|-----------------|-----------------| - |2WS(3CPU cycle)|60 < HCLK <= 84 |48 < HCLK <= 72 |44 < HCLK <= 66 |40 < HCLK <= 60 | - |---------------|----------------|----------------|-----------------|-----------------| - |3WS(4CPU cycle)| NA |72 < HCLK <= 84 |66 < HCLK <= 84 |60 < HCLK <= 80 | - |---------------|----------------|----------------|-----------------|-----------------| - |4WS(5CPU cycle)| NA | NA | NA |80 < HCLK <= 84 | - +-------------------------------------------------------------------------------------+ - - -@- On STM32F405xx/407xx and STM32F415xx/417xx devices: - (++) when VOS = '0', the maximum value of fHCLK = 144MHz. - (++) when VOS = '1', the maximum value of fHCLK = 168MHz. - [..] - On STM32F42xxx/43xxx devices: - (++) when VOS[1:0] = '0x01', the maximum value of fHCLK is 120MHz. - (++) when VOS[1:0] = '0x10', the maximum value of fHCLK is 144MHz. - (++) when VOS[1:0] = '0x11', the maximum value of f is 168MHz - [..] - On STM32F401x devices: - (++) when VOS[1:0] = '0x01', the maximum value of fHCLK is 64MHz. - (++) when VOS[1:0] = '0x10', the maximum value of fHCLK is 84MHz. - You can use PWR_MainRegulatorModeConfig() function to control VOS bits. - -@endverbatim - * @{ - */ - -/** - * @brief Configures the system clock (SYSCLK). - * @note The HSI is used (enabled by hardware) as system clock source after - * startup from Reset, wake-up from STOP and STANDBY mode, or in case - * of failure of the HSE used directly or indirectly as system clock - * (if the Clock Security System CSS is enabled). - * @note A switch from one clock source to another occurs only if the target - * clock source is ready (clock stable after startup delay or PLL locked). - * If a clock source which is not yet ready is selected, the switch will - * occur when the clock source will be ready. - * You can use RCC_GetSYSCLKSource() function to know which clock is - * currently used as system clock source. - * @param RCC_SYSCLKSource: specifies the clock source used as system clock. - * This parameter can be one of the following values: - * @arg RCC_SYSCLKSource_HSI: HSI selected as system clock source - * @arg RCC_SYSCLKSource_HSE: HSE selected as system clock source - * @arg RCC_SYSCLKSource_PLLCLK: PLL selected as system clock source - * @retval None - */ -void RCC_SYSCLKConfig(uint32_t RCC_SYSCLKSource) -{ - uint32_t tmpreg = 0; - - /* Check the parameters */ - assert_param(IS_RCC_SYSCLK_SOURCE(RCC_SYSCLKSource)); - - tmpreg = RCC->CFGR; - - /* Clear SW[1:0] bits */ - tmpreg &= ~RCC_CFGR_SW; - - /* Set SW[1:0] bits according to RCC_SYSCLKSource value */ - tmpreg |= RCC_SYSCLKSource; - - /* Store the new value */ - RCC->CFGR = tmpreg; -} - -/** - * @brief Returns the clock source used as system clock. - * @param None - * @retval The clock source used as system clock. The returned value can be one - * of the following: - * - 0x00: HSI used as system clock - * - 0x04: HSE used as system clock - * - 0x08: PLL used as system clock - */ -uint8_t RCC_GetSYSCLKSource(void) -{ - return ((uint8_t)(RCC->CFGR & RCC_CFGR_SWS)); -} - -/** - * @brief Configures the AHB clock (HCLK). - * @note Depending on the device voltage range, the software has to set correctly - * these bits to ensure that HCLK not exceed the maximum allowed frequency - * (for more details refer to section above - * "CPU, AHB and APB busses clocks configuration functions") - * @param RCC_SYSCLK: defines the AHB clock divider. This clock is derived from - * the system clock (SYSCLK). - * This parameter can be one of the following values: - * @arg RCC_SYSCLK_Div1: AHB clock = SYSCLK - * @arg RCC_SYSCLK_Div2: AHB clock = SYSCLK/2 - * @arg RCC_SYSCLK_Div4: AHB clock = SYSCLK/4 - * @arg RCC_SYSCLK_Div8: AHB clock = SYSCLK/8 - * @arg RCC_SYSCLK_Div16: AHB clock = SYSCLK/16 - * @arg RCC_SYSCLK_Div64: AHB clock = SYSCLK/64 - * @arg RCC_SYSCLK_Div128: AHB clock = SYSCLK/128 - * @arg RCC_SYSCLK_Div256: AHB clock = SYSCLK/256 - * @arg RCC_SYSCLK_Div512: AHB clock = SYSCLK/512 - * @retval None - */ -void RCC_HCLKConfig(uint32_t RCC_SYSCLK) -{ - uint32_t tmpreg = 0; - - /* Check the parameters */ - assert_param(IS_RCC_HCLK(RCC_SYSCLK)); - - tmpreg = RCC->CFGR; - - /* Clear HPRE[3:0] bits */ - tmpreg &= ~RCC_CFGR_HPRE; - - /* Set HPRE[3:0] bits according to RCC_SYSCLK value */ - tmpreg |= RCC_SYSCLK; - - /* Store the new value */ - RCC->CFGR = tmpreg; -} - - -/** - * @brief Configures the Low Speed APB clock (PCLK1). - * @param RCC_HCLK: defines the APB1 clock divider. This clock is derived from - * the AHB clock (HCLK). - * This parameter can be one of the following values: - * @arg RCC_HCLK_Div1: APB1 clock = HCLK - * @arg RCC_HCLK_Div2: APB1 clock = HCLK/2 - * @arg RCC_HCLK_Div4: APB1 clock = HCLK/4 - * @arg RCC_HCLK_Div8: APB1 clock = HCLK/8 - * @arg RCC_HCLK_Div16: APB1 clock = HCLK/16 - * @retval None - */ -void RCC_PCLK1Config(uint32_t RCC_HCLK) -{ - uint32_t tmpreg = 0; - - /* Check the parameters */ - assert_param(IS_RCC_PCLK(RCC_HCLK)); - - tmpreg = RCC->CFGR; - - /* Clear PPRE1[2:0] bits */ - tmpreg &= ~RCC_CFGR_PPRE1; - - /* Set PPRE1[2:0] bits according to RCC_HCLK value */ - tmpreg |= RCC_HCLK; - - /* Store the new value */ - RCC->CFGR = tmpreg; -} - -/** - * @brief Configures the High Speed APB clock (PCLK2). - * @param RCC_HCLK: defines the APB2 clock divider. This clock is derived from - * the AHB clock (HCLK). - * This parameter can be one of the following values: - * @arg RCC_HCLK_Div1: APB2 clock = HCLK - * @arg RCC_HCLK_Div2: APB2 clock = HCLK/2 - * @arg RCC_HCLK_Div4: APB2 clock = HCLK/4 - * @arg RCC_HCLK_Div8: APB2 clock = HCLK/8 - * @arg RCC_HCLK_Div16: APB2 clock = HCLK/16 - * @retval None - */ -void RCC_PCLK2Config(uint32_t RCC_HCLK) -{ - uint32_t tmpreg = 0; - - /* Check the parameters */ - assert_param(IS_RCC_PCLK(RCC_HCLK)); - - tmpreg = RCC->CFGR; - - /* Clear PPRE2[2:0] bits */ - tmpreg &= ~RCC_CFGR_PPRE2; - - /* Set PPRE2[2:0] bits according to RCC_HCLK value */ - tmpreg |= RCC_HCLK << 3; - - /* Store the new value */ - RCC->CFGR = tmpreg; -} - -/** - * @brief Returns the frequencies of different on chip clocks; SYSCLK, HCLK, - * PCLK1 and PCLK2. - * - * @note The system frequency computed by this function is not the real - * frequency in the chip. It is calculated based on the predefined - * constant and the selected clock source: - * @note If SYSCLK source is HSI, function returns values based on HSI_VALUE(*) - * @note If SYSCLK source is HSE, function returns values based on HSE_VALUE(**) - * @note If SYSCLK source is PLL, function returns values based on HSE_VALUE(**) - * or HSI_VALUE(*) multiplied/divided by the PLL factors. - * @note (*) HSI_VALUE is a constant defined in stm32f4xx.h file (default value - * 16 MHz) but the real value may vary depending on the variations - * in voltage and temperature. - * @note (**) HSE_VALUE is a constant defined in stm32f4xx.h file (default value - * 25 MHz), user has to ensure that HSE_VALUE is same as the real - * frequency of the crystal used. Otherwise, this function may - * have wrong result. - * - * @note The result of this function could be not correct when using fractional - * value for HSE crystal. - * - * @param RCC_Clocks: pointer to a RCC_ClocksTypeDef structure which will hold - * the clocks frequencies. - * - * @note This function can be used by the user application to compute the - * baudrate for the communication peripherals or configure other parameters. - * @note Each time SYSCLK, HCLK, PCLK1 and/or PCLK2 clock changes, this function - * must be called to update the structure's field. Otherwise, any - * configuration based on this function will be incorrect. - * - * @retval None - */ -void RCC_GetClocksFreq(RCC_ClocksTypeDef* RCC_Clocks) -{ - uint32_t tmp = 0, presc = 0, pllvco = 0, pllp = 2, pllsource = 0, pllm = 2; - - /* Get SYSCLK source -------------------------------------------------------*/ - tmp = RCC->CFGR & RCC_CFGR_SWS; - - switch (tmp) - { - case 0x00: /* HSI used as system clock source */ - RCC_Clocks->SYSCLK_Frequency = HSI_VALUE; - break; - case 0x04: /* HSE used as system clock source */ - RCC_Clocks->SYSCLK_Frequency = HSE_VALUE; - break; - case 0x08: /* PLL used as system clock source */ - - /* PLL_VCO = (HSE_VALUE or HSI_VALUE / PLLM) * PLLN - SYSCLK = PLL_VCO / PLLP - */ - pllsource = (RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC) >> 22; - pllm = RCC->PLLCFGR & RCC_PLLCFGR_PLLM; - - if (pllsource != 0) - { - /* HSE used as PLL clock source */ - pllvco = (HSE_VALUE / pllm) * ((RCC->PLLCFGR & RCC_PLLCFGR_PLLN) >> 6); - } - else - { - /* HSI used as PLL clock source */ - pllvco = (HSI_VALUE / pllm) * ((RCC->PLLCFGR & RCC_PLLCFGR_PLLN) >> 6); - } - - pllp = (((RCC->PLLCFGR & RCC_PLLCFGR_PLLP) >>16) + 1 ) *2; - RCC_Clocks->SYSCLK_Frequency = pllvco/pllp; - break; - default: - RCC_Clocks->SYSCLK_Frequency = HSI_VALUE; - break; - } - /* Compute HCLK, PCLK1 and PCLK2 clocks frequencies ------------------------*/ - - /* Get HCLK prescaler */ - tmp = RCC->CFGR & RCC_CFGR_HPRE; - tmp = tmp >> 4; - presc = APBAHBPrescTable[tmp]; - /* HCLK clock frequency */ - RCC_Clocks->HCLK_Frequency = RCC_Clocks->SYSCLK_Frequency >> presc; - - /* Get PCLK1 prescaler */ - tmp = RCC->CFGR & RCC_CFGR_PPRE1; - tmp = tmp >> 10; - presc = APBAHBPrescTable[tmp]; - /* PCLK1 clock frequency */ - RCC_Clocks->PCLK1_Frequency = RCC_Clocks->HCLK_Frequency >> presc; - - /* Get PCLK2 prescaler */ - tmp = RCC->CFGR & RCC_CFGR_PPRE2; - tmp = tmp >> 13; - presc = APBAHBPrescTable[tmp]; - /* PCLK2 clock frequency */ - RCC_Clocks->PCLK2_Frequency = RCC_Clocks->HCLK_Frequency >> presc; -} - -/** - * @} - */ - -/** @defgroup RCC_Group3 Peripheral clocks configuration functions - * @brief Peripheral clocks configuration functions - * -@verbatim - =============================================================================== - ##### Peripheral clocks configuration functions ##### - =============================================================================== - [..] This section provide functions allowing to configure the Peripheral clocks. - - (#) The RTC clock which is derived from the LSI, LSE or HSE clock divided - by 2 to 31. - - (#) After restart from Reset or wakeup from STANDBY, all peripherals are off - except internal SRAM, Flash and JTAG. Before to start using a peripheral - you have to enable its interface clock. You can do this using - RCC_AHBPeriphClockCmd(), RCC_APB2PeriphClockCmd() and RCC_APB1PeriphClockCmd() functions. - - (#) To reset the peripherals configuration (to the default state after device reset) - you can use RCC_AHBPeriphResetCmd(), RCC_APB2PeriphResetCmd() and - RCC_APB1PeriphResetCmd() functions. - - (#) To further reduce power consumption in SLEEP mode the peripheral clocks - can be disabled prior to executing the WFI or WFE instructions. - You can do this using RCC_AHBPeriphClockLPModeCmd(), - RCC_APB2PeriphClockLPModeCmd() and RCC_APB1PeriphClockLPModeCmd() functions. - -@endverbatim - * @{ - */ - -/** - * @brief Configures the RTC clock (RTCCLK). - * @note As the RTC clock configuration bits are in the Backup domain and write - * access is denied to this domain after reset, you have to enable write - * access using PWR_BackupAccessCmd(ENABLE) function before to configure - * the RTC clock source (to be done once after reset). - * @note Once the RTC clock is configured it can't be changed unless the - * Backup domain is reset using RCC_BackupResetCmd() function, or by - * a Power On Reset (POR). - * - * @param RCC_RTCCLKSource: specifies the RTC clock source. - * This parameter can be one of the following values: - * @arg RCC_RTCCLKSource_LSE: LSE selected as RTC clock - * @arg RCC_RTCCLKSource_LSI: LSI selected as RTC clock - * @arg RCC_RTCCLKSource_HSE_Divx: HSE clock divided by x selected - * as RTC clock, where x:[2,31] - * - * @note If the LSE or LSI is used as RTC clock source, the RTC continues to - * work in STOP and STANDBY modes, and can be used as wakeup source. - * However, when the HSE clock is used as RTC clock source, the RTC - * cannot be used in STOP and STANDBY modes. - * @note The maximum input clock frequency for RTC is 1MHz (when using HSE as - * RTC clock source). - * - * @retval None - */ -void RCC_RTCCLKConfig(uint32_t RCC_RTCCLKSource) -{ - uint32_t tmpreg = 0; - - /* Check the parameters */ - assert_param(IS_RCC_RTCCLK_SOURCE(RCC_RTCCLKSource)); - - if ((RCC_RTCCLKSource & 0x00000300) == 0x00000300) - { /* If HSE is selected as RTC clock source, configure HSE division factor for RTC clock */ - tmpreg = RCC->CFGR; - - /* Clear RTCPRE[4:0] bits */ - tmpreg &= ~RCC_CFGR_RTCPRE; - - /* Configure HSE division factor for RTC clock */ - tmpreg |= (RCC_RTCCLKSource & 0xFFFFCFF); - - /* Store the new value */ - RCC->CFGR = tmpreg; - } - - /* Select the RTC clock source */ - RCC->BDCR |= (RCC_RTCCLKSource & 0x00000FFF); -} - -/** - * @brief Enables or disables the RTC clock. - * @note This function must be used only after the RTC clock source was selected - * using the RCC_RTCCLKConfig function. - * @param NewState: new state of the RTC clock. This parameter can be: ENABLE or DISABLE. - * @retval None - */ -void RCC_RTCCLKCmd(FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_FUNCTIONAL_STATE(NewState)); - - *(__IO uint32_t *) BDCR_RTCEN_BB = (uint32_t)NewState; -} - -/** - * @brief Forces or releases the Backup domain reset. - * @note This function resets the RTC peripheral (including the backup registers) - * and the RTC clock source selection in RCC_CSR register. - * @note The BKPSRAM is not affected by this reset. - * @param NewState: new state of the Backup domain reset. - * This parameter can be: ENABLE or DISABLE. - * @retval None - */ -void RCC_BackupResetCmd(FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_FUNCTIONAL_STATE(NewState)); - *(__IO uint32_t *) BDCR_BDRST_BB = (uint32_t)NewState; -} - -/** - * @brief Configures the I2S clock source (I2SCLK). - * @note This function must be called before enabling the I2S APB clock. - * @param RCC_I2SCLKSource: specifies the I2S clock source. - * This parameter can be one of the following values: - * @arg RCC_I2S2CLKSource_PLLI2S: PLLI2S clock used as I2S clock source - * @arg RCC_I2S2CLKSource_Ext: External clock mapped on the I2S_CKIN pin - * used as I2S clock source - * @retval None - */ -void RCC_I2SCLKConfig(uint32_t RCC_I2SCLKSource) -{ - /* Check the parameters */ - assert_param(IS_RCC_I2SCLK_SOURCE(RCC_I2SCLKSource)); - - *(__IO uint32_t *) CFGR_I2SSRC_BB = RCC_I2SCLKSource; -} - -/** - * @brief Configures the SAI clock Divider coming from PLLI2S. - * - * @note This function can be used only for STM32F42xxx/43xxx devices. - * - * @note This function must be called before enabling the PLLI2S. - * - * @param RCC_PLLI2SDivQ: specifies the PLLI2S division factor for SAI1 clock . - * This parameter must be a number between 1 and 32. - * SAI1 clock frequency = f(PLLI2S_Q) / RCC_PLLI2SDivQ - * - * @retval None - */ -void RCC_SAIPLLI2SClkDivConfig(uint32_t RCC_PLLI2SDivQ) -{ - uint32_t tmpreg = 0; - - /* Check the parameters */ - assert_param(IS_RCC_PLLI2S_DIVQ_VALUE(RCC_PLLI2SDivQ)); - - tmpreg = RCC->DCKCFGR; - - /* Clear PLLI2SDIVQ[4:0] bits */ - tmpreg &= ~(RCC_DCKCFGR_PLLI2SDIVQ); - - /* Set PLLI2SDIVQ values */ - tmpreg |= (RCC_PLLI2SDivQ - 1); - - /* Store the new value */ - RCC->DCKCFGR = tmpreg; -} - -/** - * @brief Configures the SAI clock Divider coming from PLLSAI. - * - * @note This function can be used only for STM32F42xxx/43xxx devices. - * - * @note This function must be called before enabling the PLLSAI. - * - * @param RCC_PLLSAIDivQ: specifies the PLLSAI division factor for SAI1 clock . - * This parameter must be a number between 1 and 32. - * SAI1 clock frequency = f(PLLSAI_Q) / RCC_PLLSAIDivQ - * - * @retval None - */ -void RCC_SAIPLLSAIClkDivConfig(uint32_t RCC_PLLSAIDivQ) -{ - uint32_t tmpreg = 0; - - /* Check the parameters */ - assert_param(IS_RCC_PLLSAI_DIVQ_VALUE(RCC_PLLSAIDivQ)); - - tmpreg = RCC->DCKCFGR; - - /* Clear PLLI2SDIVQ[4:0] and PLLSAIDIVQ[4:0] bits */ - tmpreg &= ~(RCC_DCKCFGR_PLLSAIDIVQ); - - /* Set PLLSAIDIVQ values */ - tmpreg |= ((RCC_PLLSAIDivQ - 1) << 8); - - /* Store the new value */ - RCC->DCKCFGR = tmpreg; -} - -/** - * @brief Configures SAI1BlockA clock source selection. - * - * @note This function can be used only for STM32F42xxx/43xxx devices. - * - * @note This function must be called before enabling PLLSAI, PLLI2S and - * the SAI clock. - * @param RCC_SAIBlockACLKSource: specifies the SAI Block A clock source. - * This parameter can be one of the following values: - * @arg RCC_SAIACLKSource_PLLI2S: PLLI2S_Q clock divided by PLLI2SDIVQ used - * as SAI1 Block A clock - * @arg RCC_SAIACLKSource_PLLSAI: PLLISAI_Q clock divided by PLLSAIDIVQ used - * as SAI1 Block A clock - * @arg RCC_SAIACLKSource_Ext: External clock mapped on the I2S_CKIN pin - * used as SAI1 Block A clock - * @retval None - */ -void RCC_SAIBlockACLKConfig(uint32_t RCC_SAIBlockACLKSource) -{ - uint32_t tmpreg = 0; - - /* Check the parameters */ - assert_param(IS_RCC_SAIACLK_SOURCE(RCC_SAIBlockACLKSource)); - - tmpreg = RCC->DCKCFGR; - - /* Clear RCC_DCKCFGR_SAI1ASRC[1:0] bits */ - tmpreg &= ~RCC_DCKCFGR_SAI1ASRC; - - /* Set SAI Block A source selection value */ - tmpreg |= RCC_SAIBlockACLKSource; - - /* Store the new value */ - RCC->DCKCFGR = tmpreg; -} - -/** - * @brief Configures SAI1BlockB clock source selection. - * - * @note This function can be used only for STM32F42xxx/43xxx devices. - * - * @note This function must be called before enabling PLLSAI, PLLI2S and - * the SAI clock. - * @param RCC_SAIBlockBCLKSource: specifies the SAI Block B clock source. - * This parameter can be one of the following values: - * @arg RCC_SAIBCLKSource_PLLI2S: PLLI2S_Q clock divided by PLLI2SDIVQ used - * as SAI1 Block B clock - * @arg RCC_SAIBCLKSource_PLLSAI: PLLISAI_Q clock divided by PLLSAIDIVQ used - * as SAI1 Block B clock - * @arg RCC_SAIBCLKSource_Ext: External clock mapped on the I2S_CKIN pin - * used as SAI1 Block B clock - * @retval None - */ -void RCC_SAIBlockBCLKConfig(uint32_t RCC_SAIBlockBCLKSource) -{ - uint32_t tmpreg = 0; - - /* Check the parameters */ - assert_param(IS_RCC_SAIBCLK_SOURCE(RCC_SAIBlockBCLKSource)); - - tmpreg = RCC->DCKCFGR; - - /* Clear RCC_DCKCFGR_SAI1BSRC[1:0] bits */ - tmpreg &= ~RCC_DCKCFGR_SAI1BSRC; - - /* Set SAI Block B source selection value */ - tmpreg |= RCC_SAIBlockBCLKSource; - - /* Store the new value */ - RCC->DCKCFGR = tmpreg; -} - - -/** - * @brief Configures the LTDC clock Divider coming from PLLSAI. - * - * @note The LTDC peripheral is only available with STM32F429xx/439xx Devices. - * - * @note This function must be called before enabling the PLLSAI. - * - * @param RCC_PLLSAIDivR: specifies the PLLSAI division factor for LTDC clock . - * This parameter must be a number between 2 and 16. - * LTDC clock frequency = f(PLLSAI_R) / RCC_PLLSAIDivR - * - * @retval None - */ -void RCC_LTDCCLKDivConfig(uint32_t RCC_PLLSAIDivR) -{ - uint32_t tmpreg = 0; - - /* Check the parameters */ - assert_param(IS_RCC_PLLSAI_DIVR_VALUE(RCC_PLLSAIDivR)); - - tmpreg = RCC->DCKCFGR; - - /* Clear PLLSAIDIVR[2:0] bits */ - tmpreg &= ~RCC_DCKCFGR_PLLSAIDIVR; - - /* Set PLLSAIDIVR values */ - tmpreg |= RCC_PLLSAIDivR; - - /* Store the new value */ - RCC->DCKCFGR = tmpreg; -} - -/** - * @brief Configures the Timers clocks prescalers selection. - * - * @note This function can be used only for STM32F42xxx/43xxx and STM32F401xx devices. - * - * @param RCC_TIMCLKPrescaler : specifies the Timers clocks prescalers selection - * This parameter can be one of the following values: - * @arg RCC_TIMPrescDesactivated: The Timers kernels clocks prescaler is - * equal to HPRE if PPREx is corresponding to division by 1 or 2, - * else it is equal to [(HPRE * PPREx) / 2] if PPREx is corresponding to - * division by 4 or more. - * - * @arg RCC_TIMPrescActivated: The Timers kernels clocks prescaler is - * equal to HPRE if PPREx is corresponding to division by 1, 2 or 4, - * else it is equal to [(HPRE * PPREx) / 4] if PPREx is corresponding - * to division by 8 or more. - * @retval None - */ -void RCC_TIMCLKPresConfig(uint32_t RCC_TIMCLKPrescaler) -{ - /* Check the parameters */ - assert_param(IS_RCC_TIMCLK_PRESCALER(RCC_TIMCLKPrescaler)); - - *(__IO uint32_t *) DCKCFGR_TIMPRE_BB = RCC_TIMCLKPrescaler; - -} - -/** - * @brief Enables or disables the AHB1 peripheral clock. - * @note After reset, the peripheral clock (used for registers read/write access) - * is disabled and the application software has to enable this clock before - * using it. - * @param RCC_AHBPeriph: specifies the AHB1 peripheral to gates its clock. - * This parameter can be any combination of the following values: - * @arg RCC_AHB1Periph_GPIOA: GPIOA clock - * @arg RCC_AHB1Periph_GPIOB: GPIOB clock - * @arg RCC_AHB1Periph_GPIOC: GPIOC clock - * @arg RCC_AHB1Periph_GPIOD: GPIOD clock - * @arg RCC_AHB1Periph_GPIOE: GPIOE clock - * @arg RCC_AHB1Periph_GPIOF: GPIOF clock - * @arg RCC_AHB1Periph_GPIOG: GPIOG clock - * @arg RCC_AHB1Periph_GPIOG: GPIOG clock - * @arg RCC_AHB1Periph_GPIOI: GPIOI clock - * @arg RCC_AHB1Periph_GPIOJ: GPIOJ clock (STM32F42xxx/43xxx devices) - * @arg RCC_AHB1Periph_GPIOK: GPIOK clock (STM32F42xxx/43xxx devices) - * @arg RCC_AHB1Periph_CRC: CRC clock - * @arg RCC_AHB1Periph_BKPSRAM: BKPSRAM interface clock - * @arg RCC_AHB1Periph_CCMDATARAMEN CCM data RAM interface clock - * @arg RCC_AHB1Periph_DMA1: DMA1 clock - * @arg RCC_AHB1Periph_DMA2: DMA2 clock - * @arg RCC_AHB1Periph_DMA2D: DMA2D clock (STM32F429xx/439xx devices) - * @arg RCC_AHB1Periph_ETH_MAC: Ethernet MAC clock - * @arg RCC_AHB1Periph_ETH_MAC_Tx: Ethernet Transmission clock - * @arg RCC_AHB1Periph_ETH_MAC_Rx: Ethernet Reception clock - * @arg RCC_AHB1Periph_ETH_MAC_PTP: Ethernet PTP clock - * @arg RCC_AHB1Periph_OTG_HS: USB OTG HS clock - * @arg RCC_AHB1Periph_OTG_HS_ULPI: USB OTG HS ULPI clock - * @param NewState: new state of the specified peripheral clock. - * This parameter can be: ENABLE or DISABLE. - * @retval None - */ -void RCC_AHB1PeriphClockCmd(uint32_t RCC_AHB1Periph, FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_RCC_AHB1_CLOCK_PERIPH(RCC_AHB1Periph)); - - assert_param(IS_FUNCTIONAL_STATE(NewState)); - if (NewState != DISABLE) - { - RCC->AHB1ENR |= RCC_AHB1Periph; - } - else - { - RCC->AHB1ENR &= ~RCC_AHB1Periph; - } -} - -/** - * @brief Enables or disables the AHB2 peripheral clock. - * @note After reset, the peripheral clock (used for registers read/write access) - * is disabled and the application software has to enable this clock before - * using it. - * @param RCC_AHBPeriph: specifies the AHB2 peripheral to gates its clock. - * This parameter can be any combination of the following values: - * @arg RCC_AHB2Periph_DCMI: DCMI clock - * @arg RCC_AHB2Periph_CRYP: CRYP clock - * @arg RCC_AHB2Periph_HASH: HASH clock - * @arg RCC_AHB2Periph_RNG: RNG clock - * @arg RCC_AHB2Periph_OTG_FS: USB OTG FS clock - * @param NewState: new state of the specified peripheral clock. - * This parameter can be: ENABLE or DISABLE. - * @retval None - */ -void RCC_AHB2PeriphClockCmd(uint32_t RCC_AHB2Periph, FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_RCC_AHB2_PERIPH(RCC_AHB2Periph)); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - - if (NewState != DISABLE) - { - RCC->AHB2ENR |= RCC_AHB2Periph; - } - else - { - RCC->AHB2ENR &= ~RCC_AHB2Periph; - } -} - -/** - * @brief Enables or disables the AHB3 peripheral clock. - * @note After reset, the peripheral clock (used for registers read/write access) - * is disabled and the application software has to enable this clock before - * using it. - * @param RCC_AHBPeriph: specifies the AHB3 peripheral to gates its clock. - * This parameter must be: RCC_AHB3Periph_FSMC - * or RCC_AHB3Periph_FMC (STM32F42xxx/43xxx devices) - * @param NewState: new state of the specified peripheral clock. - * This parameter can be: ENABLE or DISABLE. - * @retval None - */ -void RCC_AHB3PeriphClockCmd(uint32_t RCC_AHB3Periph, FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_RCC_AHB3_PERIPH(RCC_AHB3Periph)); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - - if (NewState != DISABLE) - { - RCC->AHB3ENR |= RCC_AHB3Periph; - } - else - { - RCC->AHB3ENR &= ~RCC_AHB3Periph; - } -} - -/** - * @brief Enables or disables the Low Speed APB (APB1) peripheral clock. - * @note After reset, the peripheral clock (used for registers read/write access) - * is disabled and the application software has to enable this clock before - * using it. - * @param RCC_APB1Periph: specifies the APB1 peripheral to gates its clock. - * This parameter can be any combination of the following values: - * @arg RCC_APB1Periph_TIM2: TIM2 clock - * @arg RCC_APB1Periph_TIM3: TIM3 clock - * @arg RCC_APB1Periph_TIM4: TIM4 clock - * @arg RCC_APB1Periph_TIM5: TIM5 clock - * @arg RCC_APB1Periph_TIM6: TIM6 clock - * @arg RCC_APB1Periph_TIM7: TIM7 clock - * @arg RCC_APB1Periph_TIM12: TIM12 clock - * @arg RCC_APB1Periph_TIM13: TIM13 clock - * @arg RCC_APB1Periph_TIM14: TIM14 clock - * @arg RCC_APB1Periph_WWDG: WWDG clock - * @arg RCC_APB1Periph_SPI2: SPI2 clock - * @arg RCC_APB1Periph_SPI3: SPI3 clock - * @arg RCC_APB1Periph_USART2: USART2 clock - * @arg RCC_APB1Periph_USART3: USART3 clock - * @arg RCC_APB1Periph_UART4: UART4 clock - * @arg RCC_APB1Periph_UART5: UART5 clock - * @arg RCC_APB1Periph_I2C1: I2C1 clock - * @arg RCC_APB1Periph_I2C2: I2C2 clock - * @arg RCC_APB1Periph_I2C3: I2C3 clock - * @arg RCC_APB1Periph_CAN1: CAN1 clock - * @arg RCC_APB1Periph_CAN2: CAN2 clock - * @arg RCC_APB1Periph_PWR: PWR clock - * @arg RCC_APB1Periph_DAC: DAC clock - * @arg RCC_APB1Periph_UART7: UART7 clock - * @arg RCC_APB1Periph_UART8: UART8 clock - * @param NewState: new state of the specified peripheral clock. - * This parameter can be: ENABLE or DISABLE. - * @retval None - */ -void RCC_APB1PeriphClockCmd(uint32_t RCC_APB1Periph, FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_RCC_APB1_PERIPH(RCC_APB1Periph)); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - - if (NewState != DISABLE) - { - RCC->APB1ENR |= RCC_APB1Periph; - } - else - { - RCC->APB1ENR &= ~RCC_APB1Periph; - } -} - -/** - * @brief Enables or disables the High Speed APB (APB2) peripheral clock. - * @note After reset, the peripheral clock (used for registers read/write access) - * is disabled and the application software has to enable this clock before - * using it. - * @param RCC_APB2Periph: specifies the APB2 peripheral to gates its clock. - * This parameter can be any combination of the following values: - * @arg RCC_APB2Periph_TIM1: TIM1 clock - * @arg RCC_APB2Periph_TIM8: TIM8 clock - * @arg RCC_APB2Periph_USART1: USART1 clock - * @arg RCC_APB2Periph_USART6: USART6 clock - * @arg RCC_APB2Periph_ADC1: ADC1 clock - * @arg RCC_APB2Periph_ADC2: ADC2 clock - * @arg RCC_APB2Periph_ADC3: ADC3 clock - * @arg RCC_APB2Periph_SDIO: SDIO clock - * @arg RCC_APB2Periph_SPI1: SPI1 clock - * @arg RCC_APB2Periph_SPI4: SPI4 clock - * @arg RCC_APB2Periph_SYSCFG: SYSCFG clock - * @arg RCC_APB2Periph_TIM9: TIM9 clock - * @arg RCC_APB2Periph_TIM10: TIM10 clock - * @arg RCC_APB2Periph_TIM11: TIM11 clock - * @arg RCC_APB2Periph_SPI5: SPI5 clock - * @arg RCC_APB2Periph_SPI6: SPI6 clock - * @arg RCC_APB2Periph_SAI1: SAI1 clock (STM32F42xxx/43xxx devices) - * @arg RCC_APB2Periph_LTDC: LTDC clock (STM32F429xx/439xx devices) - * @param NewState: new state of the specified peripheral clock. - * This parameter can be: ENABLE or DISABLE. - * @retval None - */ -void RCC_APB2PeriphClockCmd(uint32_t RCC_APB2Periph, FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_RCC_APB2_PERIPH(RCC_APB2Periph)); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - - if (NewState != DISABLE) - { - RCC->APB2ENR |= RCC_APB2Periph; - } - else - { - RCC->APB2ENR &= ~RCC_APB2Periph; - } -} - -/** - * @brief Forces or releases AHB1 peripheral reset. - * @param RCC_AHB1Periph: specifies the AHB1 peripheral to reset. - * This parameter can be any combination of the following values: - * @arg RCC_AHB1Periph_GPIOA: GPIOA clock - * @arg RCC_AHB1Periph_GPIOB: GPIOB clock - * @arg RCC_AHB1Periph_GPIOC: GPIOC clock - * @arg RCC_AHB1Periph_GPIOD: GPIOD clock - * @arg RCC_AHB1Periph_GPIOE: GPIOE clock - * @arg RCC_AHB1Periph_GPIOF: GPIOF clock - * @arg RCC_AHB1Periph_GPIOG: GPIOG clock - * @arg RCC_AHB1Periph_GPIOG: GPIOG clock - * @arg RCC_AHB1Periph_GPIOI: GPIOI clock - * @arg RCC_AHB1Periph_GPIOJ: GPIOJ clock (STM32F42xxx/43xxx devices) - * @arg RCC_AHB1Periph_GPIOK: GPIOK clock (STM32F42xxx/43xxxdevices) - * @arg RCC_AHB1Periph_CRC: CRC clock - * @arg RCC_AHB1Periph_DMA1: DMA1 clock - * @arg RCC_AHB1Periph_DMA2: DMA2 clock - * @arg RCC_AHB1Periph_DMA2D: DMA2D clock (STM32F429xx/439xx devices) - * @arg RCC_AHB1Periph_ETH_MAC: Ethernet MAC clock - * @arg RCC_AHB1Periph_OTG_HS: USB OTG HS clock - * - * @param NewState: new state of the specified peripheral reset. - * This parameter can be: ENABLE or DISABLE. - * @retval None - */ -void RCC_AHB1PeriphResetCmd(uint32_t RCC_AHB1Periph, FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_RCC_AHB1_RESET_PERIPH(RCC_AHB1Periph)); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - - if (NewState != DISABLE) - { - RCC->AHB1RSTR |= RCC_AHB1Periph; - } - else - { - RCC->AHB1RSTR &= ~RCC_AHB1Periph; - } -} - -/** - * @brief Forces or releases AHB2 peripheral reset. - * @param RCC_AHB2Periph: specifies the AHB2 peripheral to reset. - * This parameter can be any combination of the following values: - * @arg RCC_AHB2Periph_DCMI: DCMI clock - * @arg RCC_AHB2Periph_CRYP: CRYP clock - * @arg RCC_AHB2Periph_HASH: HASH clock - * @arg RCC_AHB2Periph_RNG: RNG clock - * @arg RCC_AHB2Periph_OTG_FS: USB OTG FS clock - * @param NewState: new state of the specified peripheral reset. - * This parameter can be: ENABLE or DISABLE. - * @retval None - */ -void RCC_AHB2PeriphResetCmd(uint32_t RCC_AHB2Periph, FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_RCC_AHB2_PERIPH(RCC_AHB2Periph)); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - - if (NewState != DISABLE) - { - RCC->AHB2RSTR |= RCC_AHB2Periph; - } - else - { - RCC->AHB2RSTR &= ~RCC_AHB2Periph; - } -} - -/** - * @brief Forces or releases AHB3 peripheral reset. - * @param RCC_AHB3Periph: specifies the AHB3 peripheral to reset. - * This parameter must be: RCC_AHB3Periph_FSMC - * or RCC_AHB3Periph_FMC (STM32F42xxx/43xxx devices) - * @param NewState: new state of the specified peripheral reset. - * This parameter can be: ENABLE or DISABLE. - * @retval None - */ -void RCC_AHB3PeriphResetCmd(uint32_t RCC_AHB3Periph, FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_RCC_AHB3_PERIPH(RCC_AHB3Periph)); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - - if (NewState != DISABLE) - { - RCC->AHB3RSTR |= RCC_AHB3Periph; - } - else - { - RCC->AHB3RSTR &= ~RCC_AHB3Periph; - } -} - -/** - * @brief Forces or releases Low Speed APB (APB1) peripheral reset. - * @param RCC_APB1Periph: specifies the APB1 peripheral to reset. - * This parameter can be any combination of the following values: - * @arg RCC_APB1Periph_TIM2: TIM2 clock - * @arg RCC_APB1Periph_TIM3: TIM3 clock - * @arg RCC_APB1Periph_TIM4: TIM4 clock - * @arg RCC_APB1Periph_TIM5: TIM5 clock - * @arg RCC_APB1Periph_TIM6: TIM6 clock - * @arg RCC_APB1Periph_TIM7: TIM7 clock - * @arg RCC_APB1Periph_TIM12: TIM12 clock - * @arg RCC_APB1Periph_TIM13: TIM13 clock - * @arg RCC_APB1Periph_TIM14: TIM14 clock - * @arg RCC_APB1Periph_WWDG: WWDG clock - * @arg RCC_APB1Periph_SPI2: SPI2 clock - * @arg RCC_APB1Periph_SPI3: SPI3 clock - * @arg RCC_APB1Periph_USART2: USART2 clock - * @arg RCC_APB1Periph_USART3: USART3 clock - * @arg RCC_APB1Periph_UART4: UART4 clock - * @arg RCC_APB1Periph_UART5: UART5 clock - * @arg RCC_APB1Periph_I2C1: I2C1 clock - * @arg RCC_APB1Periph_I2C2: I2C2 clock - * @arg RCC_APB1Periph_I2C3: I2C3 clock - * @arg RCC_APB1Periph_CAN1: CAN1 clock - * @arg RCC_APB1Periph_CAN2: CAN2 clock - * @arg RCC_APB1Periph_PWR: PWR clock - * @arg RCC_APB1Periph_DAC: DAC clock - * @arg RCC_APB1Periph_UART7: UART7 clock - * @arg RCC_APB1Periph_UART8: UART8 clock - * @param NewState: new state of the specified peripheral reset. - * This parameter can be: ENABLE or DISABLE. - * @retval None - */ -void RCC_APB1PeriphResetCmd(uint32_t RCC_APB1Periph, FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_RCC_APB1_PERIPH(RCC_APB1Periph)); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - if (NewState != DISABLE) - { - RCC->APB1RSTR |= RCC_APB1Periph; - } - else - { - RCC->APB1RSTR &= ~RCC_APB1Periph; - } -} - -/** - * @brief Forces or releases High Speed APB (APB2) peripheral reset. - * @param RCC_APB2Periph: specifies the APB2 peripheral to reset. - * This parameter can be any combination of the following values: - * @arg RCC_APB2Periph_TIM1: TIM1 clock - * @arg RCC_APB2Periph_TIM8: TIM8 clock - * @arg RCC_APB2Periph_USART1: USART1 clock - * @arg RCC_APB2Periph_USART6: USART6 clock - * @arg RCC_APB2Periph_ADC1: ADC1 clock - * @arg RCC_APB2Periph_ADC2: ADC2 clock - * @arg RCC_APB2Periph_ADC3: ADC3 clock - * @arg RCC_APB2Periph_SDIO: SDIO clock - * @arg RCC_APB2Periph_SPI1: SPI1 clock - * @arg RCC_APB2Periph_SPI4: SPI4 clock - * @arg RCC_APB2Periph_SYSCFG: SYSCFG clock - * @arg RCC_APB2Periph_TIM9: TIM9 clock - * @arg RCC_APB2Periph_TIM10: TIM10 clock - * @arg RCC_APB2Periph_TIM11: TIM11 clock - * @arg RCC_APB2Periph_SPI5: SPI5 clock - * @arg RCC_APB2Periph_SPI6: SPI6 clock - * @arg RCC_APB2Periph_SAI1: SAI1 clock (STM32F42xxx/43xxx devices) - * @arg RCC_APB2Periph_LTDC: LTDC clock (STM32F429xx/439xx devices) - * @param NewState: new state of the specified peripheral reset. - * This parameter can be: ENABLE or DISABLE. - * @retval None - */ -void RCC_APB2PeriphResetCmd(uint32_t RCC_APB2Periph, FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_RCC_APB2_RESET_PERIPH(RCC_APB2Periph)); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - if (NewState != DISABLE) - { - RCC->APB2RSTR |= RCC_APB2Periph; - } - else - { - RCC->APB2RSTR &= ~RCC_APB2Periph; - } -} - -/** - * @brief Enables or disables the AHB1 peripheral clock during Low Power (Sleep) mode. - * @note Peripheral clock gating in SLEEP mode can be used to further reduce - * power consumption. - * @note After wakeup from SLEEP mode, the peripheral clock is enabled again. - * @note By default, all peripheral clocks are enabled during SLEEP mode. - * @param RCC_AHBPeriph: specifies the AHB1 peripheral to gates its clock. - * This parameter can be any combination of the following values: - * @arg RCC_AHB1Periph_GPIOA: GPIOA clock - * @arg RCC_AHB1Periph_GPIOB: GPIOB clock - * @arg RCC_AHB1Periph_GPIOC: GPIOC clock - * @arg RCC_AHB1Periph_GPIOD: GPIOD clock - * @arg RCC_AHB1Periph_GPIOE: GPIOE clock - * @arg RCC_AHB1Periph_GPIOF: GPIOF clock - * @arg RCC_AHB1Periph_GPIOG: GPIOG clock - * @arg RCC_AHB1Periph_GPIOG: GPIOG clock - * @arg RCC_AHB1Periph_GPIOI: GPIOI clock - * @arg RCC_AHB1Periph_GPIOJ: GPIOJ clock (STM32F42xxx/43xxx devices) - * @arg RCC_AHB1Periph_GPIOK: GPIOK clock (STM32F42xxx/43xxx devices) - * @arg RCC_AHB1Periph_CRC: CRC clock - * @arg RCC_AHB1Periph_BKPSRAM: BKPSRAM interface clock - * @arg RCC_AHB1Periph_DMA1: DMA1 clock - * @arg RCC_AHB1Periph_DMA2: DMA2 clock - * @arg RCC_AHB1Periph_DMA2D: DMA2D clock (STM32F429xx/439xx devices) - * @arg RCC_AHB1Periph_ETH_MAC: Ethernet MAC clock - * @arg RCC_AHB1Periph_ETH_MAC_Tx: Ethernet Transmission clock - * @arg RCC_AHB1Periph_ETH_MAC_Rx: Ethernet Reception clock - * @arg RCC_AHB1Periph_ETH_MAC_PTP: Ethernet PTP clock - * @arg RCC_AHB1Periph_OTG_HS: USB OTG HS clock - * @arg RCC_AHB1Periph_OTG_HS_ULPI: USB OTG HS ULPI clock - * @param NewState: new state of the specified peripheral clock. - * This parameter can be: ENABLE or DISABLE. - * @retval None - */ -void RCC_AHB1PeriphClockLPModeCmd(uint32_t RCC_AHB1Periph, FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_RCC_AHB1_LPMODE_PERIPH(RCC_AHB1Periph)); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - if (NewState != DISABLE) - { - RCC->AHB1LPENR |= RCC_AHB1Periph; - } - else - { - RCC->AHB1LPENR &= ~RCC_AHB1Periph; - } -} - -/** - * @brief Enables or disables the AHB2 peripheral clock during Low Power (Sleep) mode. - * @note Peripheral clock gating in SLEEP mode can be used to further reduce - * power consumption. - * @note After wakeup from SLEEP mode, the peripheral clock is enabled again. - * @note By default, all peripheral clocks are enabled during SLEEP mode. - * @param RCC_AHBPeriph: specifies the AHB2 peripheral to gates its clock. - * This parameter can be any combination of the following values: - * @arg RCC_AHB2Periph_DCMI: DCMI clock - * @arg RCC_AHB2Periph_CRYP: CRYP clock - * @arg RCC_AHB2Periph_HASH: HASH clock - * @arg RCC_AHB2Periph_RNG: RNG clock - * @arg RCC_AHB2Periph_OTG_FS: USB OTG FS clock - * @param NewState: new state of the specified peripheral clock. - * This parameter can be: ENABLE or DISABLE. - * @retval None - */ -void RCC_AHB2PeriphClockLPModeCmd(uint32_t RCC_AHB2Periph, FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_RCC_AHB2_PERIPH(RCC_AHB2Periph)); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - if (NewState != DISABLE) - { - RCC->AHB2LPENR |= RCC_AHB2Periph; - } - else - { - RCC->AHB2LPENR &= ~RCC_AHB2Periph; - } -} - -/** - * @brief Enables or disables the AHB3 peripheral clock during Low Power (Sleep) mode. - * @note Peripheral clock gating in SLEEP mode can be used to further reduce - * power consumption. - * @note After wakeup from SLEEP mode, the peripheral clock is enabled again. - * @note By default, all peripheral clocks are enabled during SLEEP mode. - * @param RCC_AHBPeriph: specifies the AHB3 peripheral to gates its clock. - * This parameter must be: RCC_AHB3Periph_FSMC - * or RCC_AHB3Periph_FMC (STM32F429x/439x devices) - * @param NewState: new state of the specified peripheral clock. - * This parameter can be: ENABLE or DISABLE. - * @retval None - */ -void RCC_AHB3PeriphClockLPModeCmd(uint32_t RCC_AHB3Periph, FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_RCC_AHB3_PERIPH(RCC_AHB3Periph)); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - if (NewState != DISABLE) - { - RCC->AHB3LPENR |= RCC_AHB3Periph; - } - else - { - RCC->AHB3LPENR &= ~RCC_AHB3Periph; - } -} - -/** - * @brief Enables or disables the APB1 peripheral clock during Low Power (Sleep) mode. - * @note Peripheral clock gating in SLEEP mode can be used to further reduce - * power consumption. - * @note After wakeup from SLEEP mode, the peripheral clock is enabled again. - * @note By default, all peripheral clocks are enabled during SLEEP mode. - * @param RCC_APB1Periph: specifies the APB1 peripheral to gates its clock. - * This parameter can be any combination of the following values: - * @arg RCC_APB1Periph_TIM2: TIM2 clock - * @arg RCC_APB1Periph_TIM3: TIM3 clock - * @arg RCC_APB1Periph_TIM4: TIM4 clock - * @arg RCC_APB1Periph_TIM5: TIM5 clock - * @arg RCC_APB1Periph_TIM6: TIM6 clock - * @arg RCC_APB1Periph_TIM7: TIM7 clock - * @arg RCC_APB1Periph_TIM12: TIM12 clock - * @arg RCC_APB1Periph_TIM13: TIM13 clock - * @arg RCC_APB1Periph_TIM14: TIM14 clock - * @arg RCC_APB1Periph_WWDG: WWDG clock - * @arg RCC_APB1Periph_SPI2: SPI2 clock - * @arg RCC_APB1Periph_SPI3: SPI3 clock - * @arg RCC_APB1Periph_USART2: USART2 clock - * @arg RCC_APB1Periph_USART3: USART3 clock - * @arg RCC_APB1Periph_UART4: UART4 clock - * @arg RCC_APB1Periph_UART5: UART5 clock - * @arg RCC_APB1Periph_I2C1: I2C1 clock - * @arg RCC_APB1Periph_I2C2: I2C2 clock - * @arg RCC_APB1Periph_I2C3: I2C3 clock - * @arg RCC_APB1Periph_CAN1: CAN1 clock - * @arg RCC_APB1Periph_CAN2: CAN2 clock - * @arg RCC_APB1Periph_PWR: PWR clock - * @arg RCC_APB1Periph_DAC: DAC clock - * @arg RCC_APB1Periph_UART7: UART7 clock - * @arg RCC_APB1Periph_UART8: UART8 clock - * @param NewState: new state of the specified peripheral clock. - * This parameter can be: ENABLE or DISABLE. - * @retval None - */ -void RCC_APB1PeriphClockLPModeCmd(uint32_t RCC_APB1Periph, FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_RCC_APB1_PERIPH(RCC_APB1Periph)); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - if (NewState != DISABLE) - { - RCC->APB1LPENR |= RCC_APB1Periph; - } - else - { - RCC->APB1LPENR &= ~RCC_APB1Periph; - } -} - -/** - * @brief Enables or disables the APB2 peripheral clock during Low Power (Sleep) mode. - * @note Peripheral clock gating in SLEEP mode can be used to further reduce - * power consumption. - * @note After wakeup from SLEEP mode, the peripheral clock is enabled again. - * @note By default, all peripheral clocks are enabled during SLEEP mode. - * @param RCC_APB2Periph: specifies the APB2 peripheral to gates its clock. - * This parameter can be any combination of the following values: - * @arg RCC_APB2Periph_TIM1: TIM1 clock - * @arg RCC_APB2Periph_TIM8: TIM8 clock - * @arg RCC_APB2Periph_USART1: USART1 clock - * @arg RCC_APB2Periph_USART6: USART6 clock - * @arg RCC_APB2Periph_ADC1: ADC1 clock - * @arg RCC_APB2Periph_ADC2: ADC2 clock - * @arg RCC_APB2Periph_ADC3: ADC3 clock - * @arg RCC_APB2Periph_SDIO: SDIO clock - * @arg RCC_APB2Periph_SPI1: SPI1 clock - * @arg RCC_APB2Periph_SPI4: SPI4 clock - * @arg RCC_APB2Periph_SYSCFG: SYSCFG clock - * @arg RCC_APB2Periph_TIM9: TIM9 clock - * @arg RCC_APB2Periph_TIM10: TIM10 clock - * @arg RCC_APB2Periph_TIM11: TIM11 clock - * @arg RCC_APB2Periph_SPI5: SPI5 clock - * @arg RCC_APB2Periph_SPI6: SPI6 clock - * @arg RCC_APB2Periph_SAI1: SAI1 clock (STM32F42xxx/43xxx devices) - * @arg RCC_APB2Periph_LTDC: LTDC clock (STM32F429xx/439xx devices) - * @param NewState: new state of the specified peripheral clock. - * This parameter can be: ENABLE or DISABLE. - * @retval None - */ -void RCC_APB2PeriphClockLPModeCmd(uint32_t RCC_APB2Periph, FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_RCC_APB2_PERIPH(RCC_APB2Periph)); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - if (NewState != DISABLE) - { - RCC->APB2LPENR |= RCC_APB2Periph; - } - else - { - RCC->APB2LPENR &= ~RCC_APB2Periph; - } -} - -/** - * @} - */ - -/** @defgroup RCC_Group4 Interrupts and flags management functions - * @brief Interrupts and flags management functions - * -@verbatim - =============================================================================== - ##### Interrupts and flags management functions ##### - =============================================================================== - -@endverbatim - * @{ - */ - -/** - * @brief Enables or disables the specified RCC interrupts. - * @param RCC_IT: specifies the RCC interrupt sources to be enabled or disabled. - * This parameter can be any combination of the following values: - * @arg RCC_IT_LSIRDY: LSI ready interrupt - * @arg RCC_IT_LSERDY: LSE ready interrupt - * @arg RCC_IT_HSIRDY: HSI ready interrupt - * @arg RCC_IT_HSERDY: HSE ready interrupt - * @arg RCC_IT_PLLRDY: main PLL ready interrupt - * @arg RCC_IT_PLLI2SRDY: PLLI2S ready interrupt - * @arg RCC_IT_PLLSAIRDY: PLLSAI ready interrupt (only for STM32F42xxx/43xxx devices) - * @param NewState: new state of the specified RCC interrupts. - * This parameter can be: ENABLE or DISABLE. - * @retval None - */ -void RCC_ITConfig(uint8_t RCC_IT, FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_RCC_IT(RCC_IT)); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - if (NewState != DISABLE) - { - /* Perform Byte access to RCC_CIR[14:8] bits to enable the selected interrupts */ - *(__IO uint8_t *) CIR_BYTE2_ADDRESS |= RCC_IT; - } - else - { - /* Perform Byte access to RCC_CIR[14:8] bits to disable the selected interrupts */ - *(__IO uint8_t *) CIR_BYTE2_ADDRESS &= (uint8_t)~RCC_IT; - } -} - -/** - * @brief Checks whether the specified RCC flag is set or not. - * @param RCC_FLAG: specifies the flag to check. - * This parameter can be one of the following values: - * @arg RCC_FLAG_HSIRDY: HSI oscillator clock ready - * @arg RCC_FLAG_HSERDY: HSE oscillator clock ready - * @arg RCC_FLAG_PLLRDY: main PLL clock ready - * @arg RCC_FLAG_PLLI2SRDY: PLLI2S clock ready - * @arg RCC_FLAG_PLLSAIRDY: PLLSAI clock ready (only for STM32F42xxx/43xxx devices) - * @arg RCC_FLAG_LSERDY: LSE oscillator clock ready - * @arg RCC_FLAG_LSIRDY: LSI oscillator clock ready - * @arg RCC_FLAG_BORRST: POR/PDR or BOR reset - * @arg RCC_FLAG_PINRST: Pin reset - * @arg RCC_FLAG_PORRST: POR/PDR reset - * @arg RCC_FLAG_SFTRST: Software reset - * @arg RCC_FLAG_IWDGRST: Independent Watchdog reset - * @arg RCC_FLAG_WWDGRST: Window Watchdog reset - * @arg RCC_FLAG_LPWRRST: Low Power reset - * @retval The new state of RCC_FLAG (SET or RESET). - */ -FlagStatus RCC_GetFlagStatus(uint8_t RCC_FLAG) -{ - uint32_t tmp = 0; - uint32_t statusreg = 0; - FlagStatus bitstatus = RESET; - - /* Check the parameters */ - assert_param(IS_RCC_FLAG(RCC_FLAG)); - - /* Get the RCC register index */ - tmp = RCC_FLAG >> 5; - if (tmp == 1) /* The flag to check is in CR register */ - { - statusreg = RCC->CR; - } - else if (tmp == 2) /* The flag to check is in BDCR register */ - { - statusreg = RCC->BDCR; - } - else /* The flag to check is in CSR register */ - { - statusreg = RCC->CSR; - } - - /* Get the flag position */ - tmp = RCC_FLAG & FLAG_MASK; - if ((statusreg & ((uint32_t)1 << tmp)) != (uint32_t)RESET) - { - bitstatus = SET; - } - else - { - bitstatus = RESET; - } - /* Return the flag status */ - return bitstatus; -} - -/** - * @brief Clears the RCC reset flags. - * The reset flags are: RCC_FLAG_PINRST, RCC_FLAG_PORRST, RCC_FLAG_SFTRST, - * RCC_FLAG_IWDGRST, RCC_FLAG_WWDGRST, RCC_FLAG_LPWRRST - * @param None - * @retval None - */ -void RCC_ClearFlag(void) -{ - /* Set RMVF bit to clear the reset flags */ - RCC->CSR |= RCC_CSR_RMVF; -} - -/** - * @brief Checks whether the specified RCC interrupt has occurred or not. - * @param RCC_IT: specifies the RCC interrupt source to check. - * This parameter can be one of the following values: - * @arg RCC_IT_LSIRDY: LSI ready interrupt - * @arg RCC_IT_LSERDY: LSE ready interrupt - * @arg RCC_IT_HSIRDY: HSI ready interrupt - * @arg RCC_IT_HSERDY: HSE ready interrupt - * @arg RCC_IT_PLLRDY: main PLL ready interrupt - * @arg RCC_IT_PLLI2SRDY: PLLI2S ready interrupt - * @arg RCC_IT_PLLSAIRDY: PLLSAI clock ready interrupt (only for STM32F42xxx/43xxx devices) - * @arg RCC_IT_CSS: Clock Security System interrupt - * @retval The new state of RCC_IT (SET or RESET). - */ -ITStatus RCC_GetITStatus(uint8_t RCC_IT) -{ - ITStatus bitstatus = RESET; - - /* Check the parameters */ - assert_param(IS_RCC_GET_IT(RCC_IT)); - - /* Check the status of the specified RCC interrupt */ - if ((RCC->CIR & RCC_IT) != (uint32_t)RESET) - { - bitstatus = SET; - } - else - { - bitstatus = RESET; - } - /* Return the RCC_IT status */ - return bitstatus; -} - -/** - * @brief Clears the RCC's interrupt pending bits. - * @param RCC_IT: specifies the interrupt pending bit to clear. - * This parameter can be any combination of the following values: - * @arg RCC_IT_LSIRDY: LSI ready interrupt - * @arg RCC_IT_LSERDY: LSE ready interrupt - * @arg RCC_IT_HSIRDY: HSI ready interrupt - * @arg RCC_IT_HSERDY: HSE ready interrupt - * @arg RCC_IT_PLLRDY: main PLL ready interrupt - * @arg RCC_IT_PLLI2SRDY: PLLI2S ready interrupt - * @arg RCC_IT_PLLSAIRDY: PLLSAI ready interrupt (only for STM32F42xxx/43xxx devices) - * @arg RCC_IT_CSS: Clock Security System interrupt - * @retval None - */ -void RCC_ClearITPendingBit(uint8_t RCC_IT) -{ - /* Check the parameters */ - assert_param(IS_RCC_CLEAR_IT(RCC_IT)); - - /* Perform Byte access to RCC_CIR[23:16] bits to clear the selected interrupt - pending bits */ - *(__IO uint8_t *) CIR_BYTE3_ADDRESS = RCC_IT; -} - -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/stm/lib/stm32f4xx_rcc.h b/stm/lib/stm32f4xx_rcc.h deleted file mode 100644 index 6abb55160..000000000 --- a/stm/lib/stm32f4xx_rcc.h +++ /dev/null @@ -1,615 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f4xx_rcc.h - * @author MCD Application Team - * @version V1.3.0 - * @date 08-November-2013 - * @brief This file contains all the functions prototypes for the RCC firmware library. - ****************************************************************************** - * @attention - * - *

© COPYRIGHT 2013 STMicroelectronics

- * - * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License"); - * You may not use this file except in compliance with the License. - * You may obtain a copy of the License at: - * - * http://www.st.com/software_license_agreement_liberty_v2 - * - * Unless required by applicable law or agreed to in writing, software - * distributed under the License is distributed on an "AS IS" BASIS, - * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - * See the License for the specific language governing permissions and - * limitations under the License. - * - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F4xx_RCC_H -#define __STM32F4xx_RCC_H - -#ifdef __cplusplus - extern "C" { -#endif - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx.h" - -/** @addtogroup STM32F4xx_StdPeriph_Driver - * @{ - */ - -/** @addtogroup RCC - * @{ - */ - -/* Exported types ------------------------------------------------------------*/ -typedef struct -{ - uint32_t SYSCLK_Frequency; /*!< SYSCLK clock frequency expressed in Hz */ - uint32_t HCLK_Frequency; /*!< HCLK clock frequency expressed in Hz */ - uint32_t PCLK1_Frequency; /*!< PCLK1 clock frequency expressed in Hz */ - uint32_t PCLK2_Frequency; /*!< PCLK2 clock frequency expressed in Hz */ -}RCC_ClocksTypeDef; - -/* Exported constants --------------------------------------------------------*/ - -/** @defgroup RCC_Exported_Constants - * @{ - */ - -/** @defgroup RCC_HSE_configuration - * @{ - */ -#define RCC_HSE_OFF ((uint8_t)0x00) -#define RCC_HSE_ON ((uint8_t)0x01) -#define RCC_HSE_Bypass ((uint8_t)0x05) -#define IS_RCC_HSE(HSE) (((HSE) == RCC_HSE_OFF) || ((HSE) == RCC_HSE_ON) || \ - ((HSE) == RCC_HSE_Bypass)) -/** - * @} - */ - -/** @defgroup RCC_PLL_Clock_Source - * @{ - */ -#define RCC_PLLSource_HSI ((uint32_t)0x00000000) -#define RCC_PLLSource_HSE ((uint32_t)0x00400000) -#define IS_RCC_PLL_SOURCE(SOURCE) (((SOURCE) == RCC_PLLSource_HSI) || \ - ((SOURCE) == RCC_PLLSource_HSE)) -#define IS_RCC_PLLM_VALUE(VALUE) ((VALUE) <= 63) -#define IS_RCC_PLLN_VALUE(VALUE) ((192 <= (VALUE)) && ((VALUE) <= 432)) -#define IS_RCC_PLLP_VALUE(VALUE) (((VALUE) == 2) || ((VALUE) == 4) || ((VALUE) == 6) || ((VALUE) == 8)) -#define IS_RCC_PLLQ_VALUE(VALUE) ((4 <= (VALUE)) && ((VALUE) <= 15)) - -#define IS_RCC_PLLI2SN_VALUE(VALUE) ((192 <= (VALUE)) && ((VALUE) <= 432)) -#define IS_RCC_PLLI2SR_VALUE(VALUE) ((2 <= (VALUE)) && ((VALUE) <= 7)) - -#define IS_RCC_PLLI2SQ_VALUE(VALUE) ((2 <= (VALUE)) && ((VALUE) <= 15)) -#define IS_RCC_PLLSAIN_VALUE(VALUE) ((192 <= (VALUE)) && ((VALUE) <= 432)) -#define IS_RCC_PLLSAIQ_VALUE(VALUE) ((2 <= (VALUE)) && ((VALUE) <= 15)) -#define IS_RCC_PLLSAIR_VALUE(VALUE) ((2 <= (VALUE)) && ((VALUE) <= 7)) - -#define IS_RCC_PLLSAI_DIVQ_VALUE(VALUE) ((1 <= (VALUE)) && ((VALUE) <= 32)) -#define IS_RCC_PLLI2S_DIVQ_VALUE(VALUE) ((1 <= (VALUE)) && ((VALUE) <= 32)) - -#define RCC_PLLSAIDivR_Div2 ((uint32_t)0x00000000) -#define RCC_PLLSAIDivR_Div4 ((uint32_t)0x00010000) -#define RCC_PLLSAIDivR_Div8 ((uint32_t)0x00020000) -#define RCC_PLLSAIDivR_Div16 ((uint32_t)0x00030000) -#define IS_RCC_PLLSAI_DIVR_VALUE(VALUE) (((VALUE) == RCC_PLLSAIDivR_Div2) ||\ - ((VALUE) == RCC_PLLSAIDivR_Div4) ||\ - ((VALUE) == RCC_PLLSAIDivR_Div8) ||\ - ((VALUE) == RCC_PLLSAIDivR_Div16)) - -/** - * @} - */ - -/** @defgroup RCC_System_Clock_Source - * @{ - */ -#define RCC_SYSCLKSource_HSI ((uint32_t)0x00000000) -#define RCC_SYSCLKSource_HSE ((uint32_t)0x00000001) -#define RCC_SYSCLKSource_PLLCLK ((uint32_t)0x00000002) -#define IS_RCC_SYSCLK_SOURCE(SOURCE) (((SOURCE) == RCC_SYSCLKSource_HSI) || \ - ((SOURCE) == RCC_SYSCLKSource_HSE) || \ - ((SOURCE) == RCC_SYSCLKSource_PLLCLK)) -/** - * @} - */ - -/** @defgroup RCC_AHB_Clock_Source - * @{ - */ -#define RCC_SYSCLK_Div1 ((uint32_t)0x00000000) -#define RCC_SYSCLK_Div2 ((uint32_t)0x00000080) -#define RCC_SYSCLK_Div4 ((uint32_t)0x00000090) -#define RCC_SYSCLK_Div8 ((uint32_t)0x000000A0) -#define RCC_SYSCLK_Div16 ((uint32_t)0x000000B0) -#define RCC_SYSCLK_Div64 ((uint32_t)0x000000C0) -#define RCC_SYSCLK_Div128 ((uint32_t)0x000000D0) -#define RCC_SYSCLK_Div256 ((uint32_t)0x000000E0) -#define RCC_SYSCLK_Div512 ((uint32_t)0x000000F0) -#define IS_RCC_HCLK(HCLK) (((HCLK) == RCC_SYSCLK_Div1) || ((HCLK) == RCC_SYSCLK_Div2) || \ - ((HCLK) == RCC_SYSCLK_Div4) || ((HCLK) == RCC_SYSCLK_Div8) || \ - ((HCLK) == RCC_SYSCLK_Div16) || ((HCLK) == RCC_SYSCLK_Div64) || \ - ((HCLK) == RCC_SYSCLK_Div128) || ((HCLK) == RCC_SYSCLK_Div256) || \ - ((HCLK) == RCC_SYSCLK_Div512)) -/** - * @} - */ - -/** @defgroup RCC_APB1_APB2_Clock_Source - * @{ - */ -#define RCC_HCLK_Div1 ((uint32_t)0x00000000) -#define RCC_HCLK_Div2 ((uint32_t)0x00001000) -#define RCC_HCLK_Div4 ((uint32_t)0x00001400) -#define RCC_HCLK_Div8 ((uint32_t)0x00001800) -#define RCC_HCLK_Div16 ((uint32_t)0x00001C00) -#define IS_RCC_PCLK(PCLK) (((PCLK) == RCC_HCLK_Div1) || ((PCLK) == RCC_HCLK_Div2) || \ - ((PCLK) == RCC_HCLK_Div4) || ((PCLK) == RCC_HCLK_Div8) || \ - ((PCLK) == RCC_HCLK_Div16)) -/** - * @} - */ - -/** @defgroup RCC_Interrupt_Source - * @{ - */ -#define RCC_IT_LSIRDY ((uint8_t)0x01) -#define RCC_IT_LSERDY ((uint8_t)0x02) -#define RCC_IT_HSIRDY ((uint8_t)0x04) -#define RCC_IT_HSERDY ((uint8_t)0x08) -#define RCC_IT_PLLRDY ((uint8_t)0x10) -#define RCC_IT_PLLI2SRDY ((uint8_t)0x20) -#define RCC_IT_PLLSAIRDY ((uint8_t)0x40) -#define RCC_IT_CSS ((uint8_t)0x80) - -#define IS_RCC_IT(IT) ((((IT) & (uint8_t)0x80) == 0x00) && ((IT) != 0x00)) -#define IS_RCC_GET_IT(IT) (((IT) == RCC_IT_LSIRDY) || ((IT) == RCC_IT_LSERDY) || \ - ((IT) == RCC_IT_HSIRDY) || ((IT) == RCC_IT_HSERDY) || \ - ((IT) == RCC_IT_PLLRDY) || ((IT) == RCC_IT_CSS) || \ - ((IT) == RCC_IT_PLLSAIRDY) || ((IT) == RCC_IT_PLLI2SRDY)) -#define IS_RCC_CLEAR_IT(IT)((IT) != 0x00) - -/** - * @} - */ - -/** @defgroup RCC_LSE_Configuration - * @{ - */ -#define RCC_LSE_OFF ((uint8_t)0x00) -#define RCC_LSE_ON ((uint8_t)0x01) -#define RCC_LSE_Bypass ((uint8_t)0x04) -#define IS_RCC_LSE(LSE) (((LSE) == RCC_LSE_OFF) || ((LSE) == RCC_LSE_ON) || \ - ((LSE) == RCC_LSE_Bypass)) -/** - * @} - */ - -/** @defgroup RCC_RTC_Clock_Source - * @{ - */ -#define RCC_RTCCLKSource_LSE ((uint32_t)0x00000100) -#define RCC_RTCCLKSource_LSI ((uint32_t)0x00000200) -#define RCC_RTCCLKSource_HSE_Div2 ((uint32_t)0x00020300) -#define RCC_RTCCLKSource_HSE_Div3 ((uint32_t)0x00030300) -#define RCC_RTCCLKSource_HSE_Div4 ((uint32_t)0x00040300) -#define RCC_RTCCLKSource_HSE_Div5 ((uint32_t)0x00050300) -#define RCC_RTCCLKSource_HSE_Div6 ((uint32_t)0x00060300) -#define RCC_RTCCLKSource_HSE_Div7 ((uint32_t)0x00070300) -#define RCC_RTCCLKSource_HSE_Div8 ((uint32_t)0x00080300) -#define RCC_RTCCLKSource_HSE_Div9 ((uint32_t)0x00090300) -#define RCC_RTCCLKSource_HSE_Div10 ((uint32_t)0x000A0300) -#define RCC_RTCCLKSource_HSE_Div11 ((uint32_t)0x000B0300) -#define RCC_RTCCLKSource_HSE_Div12 ((uint32_t)0x000C0300) -#define RCC_RTCCLKSource_HSE_Div13 ((uint32_t)0x000D0300) -#define RCC_RTCCLKSource_HSE_Div14 ((uint32_t)0x000E0300) -#define RCC_RTCCLKSource_HSE_Div15 ((uint32_t)0x000F0300) -#define RCC_RTCCLKSource_HSE_Div16 ((uint32_t)0x00100300) -#define RCC_RTCCLKSource_HSE_Div17 ((uint32_t)0x00110300) -#define RCC_RTCCLKSource_HSE_Div18 ((uint32_t)0x00120300) -#define RCC_RTCCLKSource_HSE_Div19 ((uint32_t)0x00130300) -#define RCC_RTCCLKSource_HSE_Div20 ((uint32_t)0x00140300) -#define RCC_RTCCLKSource_HSE_Div21 ((uint32_t)0x00150300) -#define RCC_RTCCLKSource_HSE_Div22 ((uint32_t)0x00160300) -#define RCC_RTCCLKSource_HSE_Div23 ((uint32_t)0x00170300) -#define RCC_RTCCLKSource_HSE_Div24 ((uint32_t)0x00180300) -#define RCC_RTCCLKSource_HSE_Div25 ((uint32_t)0x00190300) -#define RCC_RTCCLKSource_HSE_Div26 ((uint32_t)0x001A0300) -#define RCC_RTCCLKSource_HSE_Div27 ((uint32_t)0x001B0300) -#define RCC_RTCCLKSource_HSE_Div28 ((uint32_t)0x001C0300) -#define RCC_RTCCLKSource_HSE_Div29 ((uint32_t)0x001D0300) -#define RCC_RTCCLKSource_HSE_Div30 ((uint32_t)0x001E0300) -#define RCC_RTCCLKSource_HSE_Div31 ((uint32_t)0x001F0300) -#define IS_RCC_RTCCLK_SOURCE(SOURCE) (((SOURCE) == RCC_RTCCLKSource_LSE) || \ - ((SOURCE) == RCC_RTCCLKSource_LSI) || \ - ((SOURCE) == RCC_RTCCLKSource_HSE_Div2) || \ - ((SOURCE) == RCC_RTCCLKSource_HSE_Div3) || \ - ((SOURCE) == RCC_RTCCLKSource_HSE_Div4) || \ - ((SOURCE) == RCC_RTCCLKSource_HSE_Div5) || \ - ((SOURCE) == RCC_RTCCLKSource_HSE_Div6) || \ - ((SOURCE) == RCC_RTCCLKSource_HSE_Div7) || \ - ((SOURCE) == RCC_RTCCLKSource_HSE_Div8) || \ - ((SOURCE) == RCC_RTCCLKSource_HSE_Div9) || \ - ((SOURCE) == RCC_RTCCLKSource_HSE_Div10) || \ - ((SOURCE) == RCC_RTCCLKSource_HSE_Div11) || \ - ((SOURCE) == RCC_RTCCLKSource_HSE_Div12) || \ - ((SOURCE) == RCC_RTCCLKSource_HSE_Div13) || \ - ((SOURCE) == RCC_RTCCLKSource_HSE_Div14) || \ - ((SOURCE) == RCC_RTCCLKSource_HSE_Div15) || \ - ((SOURCE) == RCC_RTCCLKSource_HSE_Div16) || \ - ((SOURCE) == RCC_RTCCLKSource_HSE_Div17) || \ - ((SOURCE) == RCC_RTCCLKSource_HSE_Div18) || \ - ((SOURCE) == RCC_RTCCLKSource_HSE_Div19) || \ - ((SOURCE) == RCC_RTCCLKSource_HSE_Div20) || \ - ((SOURCE) == RCC_RTCCLKSource_HSE_Div21) || \ - ((SOURCE) == RCC_RTCCLKSource_HSE_Div22) || \ - ((SOURCE) == RCC_RTCCLKSource_HSE_Div23) || \ - ((SOURCE) == RCC_RTCCLKSource_HSE_Div24) || \ - ((SOURCE) == RCC_RTCCLKSource_HSE_Div25) || \ - ((SOURCE) == RCC_RTCCLKSource_HSE_Div26) || \ - ((SOURCE) == RCC_RTCCLKSource_HSE_Div27) || \ - ((SOURCE) == RCC_RTCCLKSource_HSE_Div28) || \ - ((SOURCE) == RCC_RTCCLKSource_HSE_Div29) || \ - ((SOURCE) == RCC_RTCCLKSource_HSE_Div30) || \ - ((SOURCE) == RCC_RTCCLKSource_HSE_Div31)) -/** - * @} - */ - -/** @defgroup RCC_I2S_Clock_Source - * @{ - */ -#define RCC_I2S2CLKSource_PLLI2S ((uint8_t)0x00) -#define RCC_I2S2CLKSource_Ext ((uint8_t)0x01) - -#define IS_RCC_I2SCLK_SOURCE(SOURCE) (((SOURCE) == RCC_I2S2CLKSource_PLLI2S) || ((SOURCE) == RCC_I2S2CLKSource_Ext)) -/** - * @} - */ - -/** @defgroup RCC_SAI_BlockA_Clock_Source - * @{ - */ -#define RCC_SAIACLKSource_PLLSAI ((uint32_t)0x00000000) -#define RCC_SAIACLKSource_PLLI2S ((uint32_t)0x00100000) -#define RCC_SAIACLKSource_Ext ((uint32_t)0x00200000) - -#define IS_RCC_SAIACLK_SOURCE(SOURCE) (((SOURCE) == RCC_SAIACLKSource_PLLI2S) ||\ - ((SOURCE) == RCC_SAIACLKSource_PLLSAI) ||\ - ((SOURCE) == RCC_SAIACLKSource_Ext)) -/** - * @} - */ - -/** @defgroup RCC_SAI_BlockB_Clock_Source - * @{ - */ -#define RCC_SAIBCLKSource_PLLSAI ((uint32_t)0x00000000) -#define RCC_SAIBCLKSource_PLLI2S ((uint32_t)0x00400000) -#define RCC_SAIBCLKSource_Ext ((uint32_t)0x00800000) - -#define IS_RCC_SAIBCLK_SOURCE(SOURCE) (((SOURCE) == RCC_SAIBCLKSource_PLLI2S) ||\ - ((SOURCE) == RCC_SAIBCLKSource_PLLSAI) ||\ - ((SOURCE) == RCC_SAIBCLKSource_Ext)) -/** - * @} - */ - -/** @defgroup RCC_TIM_PRescaler_Selection - * @{ - */ -#define RCC_TIMPrescDesactivated ((uint8_t)0x00) -#define RCC_TIMPrescActivated ((uint8_t)0x01) - -#define IS_RCC_TIMCLK_PRESCALER(VALUE) (((VALUE) == RCC_TIMPrescDesactivated) || ((VALUE) == RCC_TIMPrescActivated)) -/** - * @} - */ - -/** @defgroup RCC_AHB1_Peripherals - * @{ - */ -#define RCC_AHB1Periph_GPIOA ((uint32_t)0x00000001) -#define RCC_AHB1Periph_GPIOB ((uint32_t)0x00000002) -#define RCC_AHB1Periph_GPIOC ((uint32_t)0x00000004) -#define RCC_AHB1Periph_GPIOD ((uint32_t)0x00000008) -#define RCC_AHB1Periph_GPIOE ((uint32_t)0x00000010) -#define RCC_AHB1Periph_GPIOF ((uint32_t)0x00000020) -#define RCC_AHB1Periph_GPIOG ((uint32_t)0x00000040) -#define RCC_AHB1Periph_GPIOH ((uint32_t)0x00000080) -#define RCC_AHB1Periph_GPIOI ((uint32_t)0x00000100) -#define RCC_AHB1Periph_GPIOJ ((uint32_t)0x00000200) -#define RCC_AHB1Periph_GPIOK ((uint32_t)0x00000400) -#define RCC_AHB1Periph_CRC ((uint32_t)0x00001000) -#define RCC_AHB1Periph_FLITF ((uint32_t)0x00008000) -#define RCC_AHB1Periph_SRAM1 ((uint32_t)0x00010000) -#define RCC_AHB1Periph_SRAM2 ((uint32_t)0x00020000) -#define RCC_AHB1Periph_BKPSRAM ((uint32_t)0x00040000) -#define RCC_AHB1Periph_SRAM3 ((uint32_t)0x00080000) -#define RCC_AHB1Periph_CCMDATARAMEN ((uint32_t)0x00100000) -#define RCC_AHB1Periph_DMA1 ((uint32_t)0x00200000) -#define RCC_AHB1Periph_DMA2 ((uint32_t)0x00400000) -#define RCC_AHB1Periph_DMA2D ((uint32_t)0x00800000) -#define RCC_AHB1Periph_ETH_MAC ((uint32_t)0x02000000) -#define RCC_AHB1Periph_ETH_MAC_Tx ((uint32_t)0x04000000) -#define RCC_AHB1Periph_ETH_MAC_Rx ((uint32_t)0x08000000) -#define RCC_AHB1Periph_ETH_MAC_PTP ((uint32_t)0x10000000) -#define RCC_AHB1Periph_OTG_HS ((uint32_t)0x20000000) -#define RCC_AHB1Periph_OTG_HS_ULPI ((uint32_t)0x40000000) - -#define IS_RCC_AHB1_CLOCK_PERIPH(PERIPH) ((((PERIPH) & 0x810BE800) == 0x00) && ((PERIPH) != 0x00)) -#define IS_RCC_AHB1_RESET_PERIPH(PERIPH) ((((PERIPH) & 0xDD1FE800) == 0x00) && ((PERIPH) != 0x00)) -#define IS_RCC_AHB1_LPMODE_PERIPH(PERIPH) ((((PERIPH) & 0x81106800) == 0x00) && ((PERIPH) != 0x00)) - -/** - * @} - */ - -/** @defgroup RCC_AHB2_Peripherals - * @{ - */ -#define RCC_AHB2Periph_DCMI ((uint32_t)0x00000001) -#define RCC_AHB2Periph_CRYP ((uint32_t)0x00000010) -#define RCC_AHB2Periph_HASH ((uint32_t)0x00000020) -#define RCC_AHB2Periph_RNG ((uint32_t)0x00000040) -#define RCC_AHB2Periph_OTG_FS ((uint32_t)0x00000080) -#define IS_RCC_AHB2_PERIPH(PERIPH) ((((PERIPH) & 0xFFFFFF0E) == 0x00) && ((PERIPH) != 0x00)) -/** - * @} - */ - -/** @defgroup RCC_AHB3_Peripherals - * @{ - */ -#if defined (STM32F40_41xxx) -#define RCC_AHB3Periph_FSMC ((uint32_t)0x00000001) -#endif /* STM32F40_41xxx */ - -#if defined (STM32F427_437xx) || defined (STM32F429_439xx) -#define RCC_AHB3Periph_FMC ((uint32_t)0x00000001) -#endif /* STM32F427_437xx || STM32F429_439xx */ - -#define IS_RCC_AHB3_PERIPH(PERIPH) ((((PERIPH) & 0xFFFFFFFE) == 0x00) && ((PERIPH) != 0x00)) -/** - * @} - */ - -/** @defgroup RCC_APB1_Peripherals - * @{ - */ -#define RCC_APB1Periph_TIM2 ((uint32_t)0x00000001) -#define RCC_APB1Periph_TIM3 ((uint32_t)0x00000002) -#define RCC_APB1Periph_TIM4 ((uint32_t)0x00000004) -#define RCC_APB1Periph_TIM5 ((uint32_t)0x00000008) -#define RCC_APB1Periph_TIM6 ((uint32_t)0x00000010) -#define RCC_APB1Periph_TIM7 ((uint32_t)0x00000020) -#define RCC_APB1Periph_TIM12 ((uint32_t)0x00000040) -#define RCC_APB1Periph_TIM13 ((uint32_t)0x00000080) -#define RCC_APB1Periph_TIM14 ((uint32_t)0x00000100) -#define RCC_APB1Periph_WWDG ((uint32_t)0x00000800) -#define RCC_APB1Periph_SPI2 ((uint32_t)0x00004000) -#define RCC_APB1Periph_SPI3 ((uint32_t)0x00008000) -#define RCC_APB1Periph_USART2 ((uint32_t)0x00020000) -#define RCC_APB1Periph_USART3 ((uint32_t)0x00040000) -#define RCC_APB1Periph_UART4 ((uint32_t)0x00080000) -#define RCC_APB1Periph_UART5 ((uint32_t)0x00100000) -#define RCC_APB1Periph_I2C1 ((uint32_t)0x00200000) -#define RCC_APB1Periph_I2C2 ((uint32_t)0x00400000) -#define RCC_APB1Periph_I2C3 ((uint32_t)0x00800000) -#define RCC_APB1Periph_CAN1 ((uint32_t)0x02000000) -#define RCC_APB1Periph_CAN2 ((uint32_t)0x04000000) -#define RCC_APB1Periph_PWR ((uint32_t)0x10000000) -#define RCC_APB1Periph_DAC ((uint32_t)0x20000000) -#define RCC_APB1Periph_UART7 ((uint32_t)0x40000000) -#define RCC_APB1Periph_UART8 ((uint32_t)0x80000000) -#define IS_RCC_APB1_PERIPH(PERIPH) ((((PERIPH) & 0x09013600) == 0x00) && ((PERIPH) != 0x00)) -/** - * @} - */ - -/** @defgroup RCC_APB2_Peripherals - * @{ - */ -#define RCC_APB2Periph_TIM1 ((uint32_t)0x00000001) -#define RCC_APB2Periph_TIM8 ((uint32_t)0x00000002) -#define RCC_APB2Periph_USART1 ((uint32_t)0x00000010) -#define RCC_APB2Periph_USART6 ((uint32_t)0x00000020) -#define RCC_APB2Periph_ADC ((uint32_t)0x00000100) -#define RCC_APB2Periph_ADC1 ((uint32_t)0x00000100) -#define RCC_APB2Periph_ADC2 ((uint32_t)0x00000200) -#define RCC_APB2Periph_ADC3 ((uint32_t)0x00000400) -#define RCC_APB2Periph_SDIO ((uint32_t)0x00000800) -#define RCC_APB2Periph_SPI1 ((uint32_t)0x00001000) -#define RCC_APB2Periph_SPI4 ((uint32_t)0x00002000) -#define RCC_APB2Periph_SYSCFG ((uint32_t)0x00004000) -#define RCC_APB2Periph_TIM9 ((uint32_t)0x00010000) -#define RCC_APB2Periph_TIM10 ((uint32_t)0x00020000) -#define RCC_APB2Periph_TIM11 ((uint32_t)0x00040000) -#define RCC_APB2Periph_SPI5 ((uint32_t)0x00100000) -#define RCC_APB2Periph_SPI6 ((uint32_t)0x00200000) -#define RCC_APB2Periph_SAI1 ((uint32_t)0x00400000) -#define RCC_APB2Periph_LTDC ((uint32_t)0x04000000) - -#define IS_RCC_APB2_PERIPH(PERIPH) ((((PERIPH) & 0xFB8880CC) == 0x00) && ((PERIPH) != 0x00)) -#define IS_RCC_APB2_RESET_PERIPH(PERIPH) ((((PERIPH) & 0xFB8886CC) == 0x00) && ((PERIPH) != 0x00)) - -/** - * @} - */ - -/** @defgroup RCC_MCO1_Clock_Source_Prescaler - * @{ - */ -#define RCC_MCO1Source_HSI ((uint32_t)0x00000000) -#define RCC_MCO1Source_LSE ((uint32_t)0x00200000) -#define RCC_MCO1Source_HSE ((uint32_t)0x00400000) -#define RCC_MCO1Source_PLLCLK ((uint32_t)0x00600000) -#define RCC_MCO1Div_1 ((uint32_t)0x00000000) -#define RCC_MCO1Div_2 ((uint32_t)0x04000000) -#define RCC_MCO1Div_3 ((uint32_t)0x05000000) -#define RCC_MCO1Div_4 ((uint32_t)0x06000000) -#define RCC_MCO1Div_5 ((uint32_t)0x07000000) -#define IS_RCC_MCO1SOURCE(SOURCE) (((SOURCE) == RCC_MCO1Source_HSI) || ((SOURCE) == RCC_MCO1Source_LSE) || \ - ((SOURCE) == RCC_MCO1Source_HSE) || ((SOURCE) == RCC_MCO1Source_PLLCLK)) - -#define IS_RCC_MCO1DIV(DIV) (((DIV) == RCC_MCO1Div_1) || ((DIV) == RCC_MCO1Div_2) || \ - ((DIV) == RCC_MCO1Div_3) || ((DIV) == RCC_MCO1Div_4) || \ - ((DIV) == RCC_MCO1Div_5)) -/** - * @} - */ - -/** @defgroup RCC_MCO2_Clock_Source_Prescaler - * @{ - */ -#define RCC_MCO2Source_SYSCLK ((uint32_t)0x00000000) -#define RCC_MCO2Source_PLLI2SCLK ((uint32_t)0x40000000) -#define RCC_MCO2Source_HSE ((uint32_t)0x80000000) -#define RCC_MCO2Source_PLLCLK ((uint32_t)0xC0000000) -#define RCC_MCO2Div_1 ((uint32_t)0x00000000) -#define RCC_MCO2Div_2 ((uint32_t)0x20000000) -#define RCC_MCO2Div_3 ((uint32_t)0x28000000) -#define RCC_MCO2Div_4 ((uint32_t)0x30000000) -#define RCC_MCO2Div_5 ((uint32_t)0x38000000) -#define IS_RCC_MCO2SOURCE(SOURCE) (((SOURCE) == RCC_MCO2Source_SYSCLK) || ((SOURCE) == RCC_MCO2Source_PLLI2SCLK)|| \ - ((SOURCE) == RCC_MCO2Source_HSE) || ((SOURCE) == RCC_MCO2Source_PLLCLK)) - -#define IS_RCC_MCO2DIV(DIV) (((DIV) == RCC_MCO2Div_1) || ((DIV) == RCC_MCO2Div_2) || \ - ((DIV) == RCC_MCO2Div_3) || ((DIV) == RCC_MCO2Div_4) || \ - ((DIV) == RCC_MCO2Div_5)) -/** - * @} - */ - -/** @defgroup RCC_Flag - * @{ - */ -#define RCC_FLAG_HSIRDY ((uint8_t)0x21) -#define RCC_FLAG_HSERDY ((uint8_t)0x31) -#define RCC_FLAG_PLLRDY ((uint8_t)0x39) -#define RCC_FLAG_PLLI2SRDY ((uint8_t)0x3B) -#define RCC_FLAG_PLLSAIRDY ((uint8_t)0x3D) -#define RCC_FLAG_LSERDY ((uint8_t)0x41) -#define RCC_FLAG_LSIRDY ((uint8_t)0x61) -#define RCC_FLAG_BORRST ((uint8_t)0x79) -#define RCC_FLAG_PINRST ((uint8_t)0x7A) -#define RCC_FLAG_PORRST ((uint8_t)0x7B) -#define RCC_FLAG_SFTRST ((uint8_t)0x7C) -#define RCC_FLAG_IWDGRST ((uint8_t)0x7D) -#define RCC_FLAG_WWDGRST ((uint8_t)0x7E) -#define RCC_FLAG_LPWRRST ((uint8_t)0x7F) - -#define IS_RCC_FLAG(FLAG) (((FLAG) == RCC_FLAG_HSIRDY) || ((FLAG) == RCC_FLAG_HSERDY) || \ - ((FLAG) == RCC_FLAG_PLLRDY) || ((FLAG) == RCC_FLAG_LSERDY) || \ - ((FLAG) == RCC_FLAG_LSIRDY) || ((FLAG) == RCC_FLAG_BORRST) || \ - ((FLAG) == RCC_FLAG_PINRST) || ((FLAG) == RCC_FLAG_PORRST) || \ - ((FLAG) == RCC_FLAG_SFTRST) || ((FLAG) == RCC_FLAG_IWDGRST)|| \ - ((FLAG) == RCC_FLAG_WWDGRST) || ((FLAG) == RCC_FLAG_LPWRRST)|| \ - ((FLAG) == RCC_FLAG_PLLI2SRDY)|| ((FLAG) == RCC_FLAG_PLLSAIRDY)) - -#define IS_RCC_CALIBRATION_VALUE(VALUE) ((VALUE) <= 0x1F) -/** - * @} - */ - -/** - * @} - */ - -/* Exported macro ------------------------------------------------------------*/ -/* Exported functions --------------------------------------------------------*/ - -/* Function used to set the RCC clock configuration to the default reset state */ -void RCC_DeInit(void); - -/* Internal/external clocks, PLL, CSS and MCO configuration functions *********/ -void RCC_HSEConfig(uint8_t RCC_HSE); -ErrorStatus RCC_WaitForHSEStartUp(void); -void RCC_AdjustHSICalibrationValue(uint8_t HSICalibrationValue); -void RCC_HSICmd(FunctionalState NewState); -void RCC_LSEConfig(uint8_t RCC_LSE); -void RCC_LSICmd(FunctionalState NewState); -void RCC_PLLConfig(uint32_t RCC_PLLSource, uint32_t PLLM, uint32_t PLLN, uint32_t PLLP, uint32_t PLLQ); -void RCC_PLLCmd(FunctionalState NewState); - -#if defined (STM32F40_41xxx) || defined (STM32F401xx) -void RCC_PLLI2SConfig(uint32_t PLLI2SN, uint32_t PLLI2SR); -#endif /* STM32F40_41xxx || STM32F401xx */ - -#if defined (STM32F427_437xx) || defined (STM32F429_439xx) -void RCC_PLLI2SConfig(uint32_t PLLI2SN, uint32_t PLLI2SQ, uint32_t PLLI2SR); -#endif /* STM32F41_43xxx */ - -void RCC_PLLI2SCmd(FunctionalState NewState); -void RCC_PLLSAIConfig(uint32_t PLLSAIN, uint32_t PLLSAIQ, uint32_t PLLSAIR); -void RCC_PLLSAICmd(FunctionalState NewState); -void RCC_ClockSecuritySystemCmd(FunctionalState NewState); -void RCC_MCO1Config(uint32_t RCC_MCO1Source, uint32_t RCC_MCO1Div); -void RCC_MCO2Config(uint32_t RCC_MCO2Source, uint32_t RCC_MCO2Div); - -/* System, AHB and APB busses clocks configuration functions ******************/ -void RCC_SYSCLKConfig(uint32_t RCC_SYSCLKSource); -uint8_t RCC_GetSYSCLKSource(void); -void RCC_HCLKConfig(uint32_t RCC_SYSCLK); -void RCC_PCLK1Config(uint32_t RCC_HCLK); -void RCC_PCLK2Config(uint32_t RCC_HCLK); -void RCC_GetClocksFreq(RCC_ClocksTypeDef* RCC_Clocks); - -/* Peripheral clocks configuration functions **********************************/ -void RCC_RTCCLKConfig(uint32_t RCC_RTCCLKSource); -void RCC_RTCCLKCmd(FunctionalState NewState); -void RCC_BackupResetCmd(FunctionalState NewState); -void RCC_I2SCLKConfig(uint32_t RCC_I2SCLKSource); -void RCC_SAIPLLI2SClkDivConfig(uint32_t RCC_PLLI2SDivQ); -void RCC_SAIPLLSAIClkDivConfig(uint32_t RCC_PLLSAIDivQ); -void RCC_SAIBlockACLKConfig(uint32_t RCC_SAIBlockACLKSource); -void RCC_SAIBlockBCLKConfig(uint32_t RCC_SAIBlockBCLKSource); -void RCC_LTDCCLKDivConfig(uint32_t RCC_PLLSAIDivR); -void RCC_TIMCLKPresConfig(uint32_t RCC_TIMCLKPrescaler); - -void RCC_AHB1PeriphClockCmd(uint32_t RCC_AHB1Periph, FunctionalState NewState); -void RCC_AHB2PeriphClockCmd(uint32_t RCC_AHB2Periph, FunctionalState NewState); -void RCC_AHB3PeriphClockCmd(uint32_t RCC_AHB3Periph, FunctionalState NewState); -void RCC_APB1PeriphClockCmd(uint32_t RCC_APB1Periph, FunctionalState NewState); -void RCC_APB2PeriphClockCmd(uint32_t RCC_APB2Periph, FunctionalState NewState); - -void RCC_AHB1PeriphResetCmd(uint32_t RCC_AHB1Periph, FunctionalState NewState); -void RCC_AHB2PeriphResetCmd(uint32_t RCC_AHB2Periph, FunctionalState NewState); -void RCC_AHB3PeriphResetCmd(uint32_t RCC_AHB3Periph, FunctionalState NewState); -void RCC_APB1PeriphResetCmd(uint32_t RCC_APB1Periph, FunctionalState NewState); -void RCC_APB2PeriphResetCmd(uint32_t RCC_APB2Periph, FunctionalState NewState); - -void RCC_AHB1PeriphClockLPModeCmd(uint32_t RCC_AHB1Periph, FunctionalState NewState); -void RCC_AHB2PeriphClockLPModeCmd(uint32_t RCC_AHB2Periph, FunctionalState NewState); -void RCC_AHB3PeriphClockLPModeCmd(uint32_t RCC_AHB3Periph, FunctionalState NewState); -void RCC_APB1PeriphClockLPModeCmd(uint32_t RCC_APB1Periph, FunctionalState NewState); -void RCC_APB2PeriphClockLPModeCmd(uint32_t RCC_APB2Periph, FunctionalState NewState); - -/* Interrupts and flags management functions **********************************/ -void RCC_ITConfig(uint8_t RCC_IT, FunctionalState NewState); -FlagStatus RCC_GetFlagStatus(uint8_t RCC_FLAG); -void RCC_ClearFlag(void); -ITStatus RCC_GetITStatus(uint8_t RCC_IT); -void RCC_ClearITPendingBit(uint8_t RCC_IT); - -#ifdef __cplusplus -} -#endif - -#endif /* __STM32F4xx_RCC_H */ - -/** - * @} - */ - -/** - * @} - */ - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/stm/lib/stm32f4xx_rng.c b/stm/lib/stm32f4xx_rng.c deleted file mode 100644 index 4746dd6bd..000000000 --- a/stm/lib/stm32f4xx_rng.c +++ /dev/null @@ -1,397 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f4xx_rng.c - * @author MCD Application Team - * @version V1.3.0 - * @date 08-November-2013 - * @brief This file provides firmware functions to manage the following - * functionalities of the Random Number Generator (RNG) peripheral: - * + Initialization and Configuration - * + Get 32 bit Random number - * + Interrupts and flags management - * -@verbatim - - =================================================================== - ##### How to use this driver ##### - =================================================================== - [..] - (#) Enable The RNG controller clock using - RCC_AHB2PeriphClockCmd(RCC_AHB2Periph_RNG, ENABLE) function. - - (#) Activate the RNG peripheral using RNG_Cmd() function. - - (#) Wait until the 32 bit Random number Generator contains a valid random data - (using polling/interrupt mode). For more details, refer to "Interrupts and - flags management functions" module description. - - (#) Get the 32 bit Random number using RNG_GetRandomNumber() function - - (#) To get another 32 bit Random number, go to step 3. - - -@endverbatim - * - ****************************************************************************** - * @attention - * - *

© COPYRIGHT 2013 STMicroelectronics

- * - * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License"); - * You may not use this file except in compliance with the License. - * You may obtain a copy of the License at: - * - * http://www.st.com/software_license_agreement_liberty_v2 - * - * Unless required by applicable law or agreed to in writing, software - * distributed under the License is distributed on an "AS IS" BASIS, - * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - * See the License for the specific language governing permissions and - * limitations under the License. - * - ****************************************************************************** - */ - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx_rng.h" -#include "stm32f4xx_rcc.h" - -/** @addtogroup STM32F4xx_StdPeriph_Driver - * @{ - */ - -/** @defgroup RNG - * @brief RNG driver modules - * @{ - */ - -/* Private typedef -----------------------------------------------------------*/ -/* Private define ------------------------------------------------------------*/ -/* Private macro -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -/* Private function prototypes -----------------------------------------------*/ -/* Private functions ---------------------------------------------------------*/ - -/** @defgroup RNG_Private_Functions - * @{ - */ - -/** @defgroup RNG_Group1 Initialization and Configuration functions - * @brief Initialization and Configuration functions - * -@verbatim - =============================================================================== - ##### Initialization and Configuration functions ##### - =============================================================================== - [..] This section provides functions allowing to - (+) Initialize the RNG peripheral - (+) Enable or disable the RNG peripheral - -@endverbatim - * @{ - */ - -/** - * @brief De-initializes the RNG peripheral registers to their default reset values. - * @param None - * @retval None - */ -void RNG_DeInit(void) -{ - /* Enable RNG reset state */ - RCC_AHB2PeriphResetCmd(RCC_AHB2Periph_RNG, ENABLE); - - /* Release RNG from reset state */ - RCC_AHB2PeriphResetCmd(RCC_AHB2Periph_RNG, DISABLE); -} - -/** - * @brief Enables or disables the RNG peripheral. - * @param NewState: new state of the RNG peripheral. - * This parameter can be: ENABLE or DISABLE. - * @retval None - */ -void RNG_Cmd(FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_FUNCTIONAL_STATE(NewState)); - - if (NewState != DISABLE) - { - /* Enable the RNG */ - RNG->CR |= RNG_CR_RNGEN; - } - else - { - /* Disable the RNG */ - RNG->CR &= ~RNG_CR_RNGEN; - } -} -/** - * @} - */ - -/** @defgroup RNG_Group2 Get 32 bit Random number function - * @brief Get 32 bit Random number function - * - -@verbatim - =============================================================================== - ##### Get 32 bit Random number function ##### - =============================================================================== - [..] This section provides a function allowing to get the 32 bit Random number - - (@) Before to call this function you have to wait till DRDY flag is set, - using RNG_GetFlagStatus(RNG_FLAG_DRDY) function. - -@endverbatim - * @{ - */ - - -/** - * @brief Returns a 32-bit random number. - * - * @note Before to call this function you have to wait till DRDY (data ready) - * flag is set, using RNG_GetFlagStatus(RNG_FLAG_DRDY) function. - * @note Each time the the Random number data is read (using RNG_GetRandomNumber() - * function), the RNG_FLAG_DRDY flag is automatically cleared. - * @note In the case of a seed error, the generation of random numbers is - * interrupted for as long as the SECS bit is '1'. If a number is - * available in the RNG_DR register, it must not be used because it may - * not have enough entropy. In this case, it is recommended to clear the - * SEIS bit(using RNG_ClearFlag(RNG_FLAG_SECS) function), then disable - * and enable the RNG peripheral (using RNG_Cmd() function) to - * reinitialize and restart the RNG. - * @note In the case of a clock error, the RNG is no more able to generate - * random numbers because the PLL48CLK clock is not correct. User have - * to check that the clock controller is correctly configured to provide - * the RNG clock and clear the CEIS bit (using RNG_ClearFlag(RNG_FLAG_CECS) - * function) . The clock error has no impact on the previously generated - * random numbers, and the RNG_DR register contents can be used. - * - * @param None - * @retval 32-bit random number. - */ -uint32_t RNG_GetRandomNumber(void) -{ - /* Return the 32 bit random number from the DR register */ - return RNG->DR; -} - - -/** - * @} - */ - -/** @defgroup RNG_Group3 Interrupts and flags management functions - * @brief Interrupts and flags management functions - * -@verbatim - =============================================================================== - ##### Interrupts and flags management functions ##### - =============================================================================== - - [..] This section provides functions allowing to configure the RNG Interrupts and - to get the status and clear flags and Interrupts pending bits. - - [..] The RNG provides 3 Interrupts sources and 3 Flags: - - *** Flags : *** - =============== - [..] - (#) RNG_FLAG_DRDY : In the case of the RNG_DR register contains valid - random data. it is cleared by reading the valid data(using - RNG_GetRandomNumber() function). - - (#) RNG_FLAG_CECS : In the case of a seed error detection. - - (#) RNG_FLAG_SECS : In the case of a clock error detection. - - *** Interrupts *** - ================== - [..] If enabled, an RNG interrupt is pending : - - (#) In the case of the RNG_DR register contains valid random data. - This interrupt source is cleared once the RNG_DR register has been read - (using RNG_GetRandomNumber() function) until a new valid value is - computed; or - (#) In the case of a seed error : One of the following faulty sequences has - been detected: - (++) More than 64 consecutive bits at the same value (0 or 1) - (++) More than 32 consecutive alternance of 0 and 1 (0101010101...01) - This interrupt source is cleared using RNG_ClearITPendingBit(RNG_IT_SEI) - function; or - (#) In the case of a clock error : the PLL48CLK (RNG peripheral clock source) - was not correctly detected (fPLL48CLK< fHCLK/16). This interrupt source is - cleared using RNG_ClearITPendingBit(RNG_IT_CEI) function. - -@- note In this case, User have to check that the clock controller is - correctly configured to provide the RNG clock. - - *** Managing the RNG controller events : *** - ============================================ - [..] The user should identify which mode will be used in his application to manage - the RNG controller events: Polling mode or Interrupt mode. - - (#) In the Polling Mode it is advised to use the following functions: - (++) RNG_GetFlagStatus() : to check if flags events occur. - (++) RNG_ClearFlag() : to clear the flags events. - - -@@- RNG_FLAG_DRDY can not be cleared by RNG_ClearFlag(). it is cleared only - by reading the Random number data. - - (#) In the Interrupt Mode it is advised to use the following functions: - (++) RNG_ITConfig() : to enable or disable the interrupt source. - (++) RNG_GetITStatus() : to check if Interrupt occurs. - (++) RNG_ClearITPendingBit() : to clear the Interrupt pending Bit - (corresponding Flag). - -@endverbatim - * @{ - */ - -/** - * @brief Enables or disables the RNG interrupt. - * @note The RNG provides 3 interrupt sources, - * - Computed data is ready event (DRDY), and - * - Seed error Interrupt (SEI) and - * - Clock error Interrupt (CEI), - * all these interrupts sources are enabled by setting the IE bit in - * CR register. However, each interrupt have its specific status bit - * (see RNG_GetITStatus() function) and clear bit except the DRDY event - * (see RNG_ClearITPendingBit() function). - * @param NewState: new state of the RNG interrupt. - * This parameter can be: ENABLE or DISABLE. - * @retval None - */ -void RNG_ITConfig(FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_FUNCTIONAL_STATE(NewState)); - - if (NewState != DISABLE) - { - /* Enable the RNG interrupt */ - RNG->CR |= RNG_CR_IE; - } - else - { - /* Disable the RNG interrupt */ - RNG->CR &= ~RNG_CR_IE; - } -} - -/** - * @brief Checks whether the specified RNG flag is set or not. - * @param RNG_FLAG: specifies the RNG flag to check. - * This parameter can be one of the following values: - * @arg RNG_FLAG_DRDY: Data Ready flag. - * @arg RNG_FLAG_CECS: Clock Error Current flag. - * @arg RNG_FLAG_SECS: Seed Error Current flag. - * @retval The new state of RNG_FLAG (SET or RESET). - */ -FlagStatus RNG_GetFlagStatus(uint8_t RNG_FLAG) -{ - FlagStatus bitstatus = RESET; - /* Check the parameters */ - assert_param(IS_RNG_GET_FLAG(RNG_FLAG)); - - /* Check the status of the specified RNG flag */ - if ((RNG->SR & RNG_FLAG) != (uint8_t)RESET) - { - /* RNG_FLAG is set */ - bitstatus = SET; - } - else - { - /* RNG_FLAG is reset */ - bitstatus = RESET; - } - /* Return the RNG_FLAG status */ - return bitstatus; -} - - -/** - * @brief Clears the RNG flags. - * @param RNG_FLAG: specifies the flag to clear. - * This parameter can be any combination of the following values: - * @arg RNG_FLAG_CECS: Clock Error Current flag. - * @arg RNG_FLAG_SECS: Seed Error Current flag. - * @note RNG_FLAG_DRDY can not be cleared by RNG_ClearFlag() function. - * This flag is cleared only by reading the Random number data (using - * RNG_GetRandomNumber() function). - * @retval None - */ -void RNG_ClearFlag(uint8_t RNG_FLAG) -{ - /* Check the parameters */ - assert_param(IS_RNG_CLEAR_FLAG(RNG_FLAG)); - /* Clear the selected RNG flags */ - RNG->SR = ~(uint32_t)(((uint32_t)RNG_FLAG) << 4); -} - -/** - * @brief Checks whether the specified RNG interrupt has occurred or not. - * @param RNG_IT: specifies the RNG interrupt source to check. - * This parameter can be one of the following values: - * @arg RNG_IT_CEI: Clock Error Interrupt. - * @arg RNG_IT_SEI: Seed Error Interrupt. - * @retval The new state of RNG_IT (SET or RESET). - */ -ITStatus RNG_GetITStatus(uint8_t RNG_IT) -{ - ITStatus bitstatus = RESET; - /* Check the parameters */ - assert_param(IS_RNG_GET_IT(RNG_IT)); - - /* Check the status of the specified RNG interrupt */ - if ((RNG->SR & RNG_IT) != (uint8_t)RESET) - { - /* RNG_IT is set */ - bitstatus = SET; - } - else - { - /* RNG_IT is reset */ - bitstatus = RESET; - } - /* Return the RNG_IT status */ - return bitstatus; -} - - -/** - * @brief Clears the RNG interrupt pending bit(s). - * @param RNG_IT: specifies the RNG interrupt pending bit(s) to clear. - * This parameter can be any combination of the following values: - * @arg RNG_IT_CEI: Clock Error Interrupt. - * @arg RNG_IT_SEI: Seed Error Interrupt. - * @retval None - */ -void RNG_ClearITPendingBit(uint8_t RNG_IT) -{ - /* Check the parameters */ - assert_param(IS_RNG_IT(RNG_IT)); - - /* Clear the selected RNG interrupt pending bit */ - RNG->SR = (uint8_t)~RNG_IT; -} -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/stm/lib/stm32f4xx_rng.h b/stm/lib/stm32f4xx_rng.h deleted file mode 100644 index 874c9bab5..000000000 --- a/stm/lib/stm32f4xx_rng.h +++ /dev/null @@ -1,120 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f4xx_rng.h - * @author MCD Application Team - * @version V1.3.0 - * @date 08-November-2013 - * @brief This file contains all the functions prototypes for the Random - * Number Generator(RNG) firmware library. - ****************************************************************************** - * @attention - * - *

© COPYRIGHT 2013 STMicroelectronics

- * - * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License"); - * You may not use this file except in compliance with the License. - * You may obtain a copy of the License at: - * - * http://www.st.com/software_license_agreement_liberty_v2 - * - * Unless required by applicable law or agreed to in writing, software - * distributed under the License is distributed on an "AS IS" BASIS, - * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - * See the License for the specific language governing permissions and - * limitations under the License. - * - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F4xx_RNG_H -#define __STM32F4xx_RNG_H - -#ifdef __cplusplus - extern "C" { -#endif - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx.h" - -/** @addtogroup STM32F4xx_StdPeriph_Driver - * @{ - */ - -/** @addtogroup RNG - * @{ - */ - -/* Exported types ------------------------------------------------------------*/ -/* Exported constants --------------------------------------------------------*/ - -/** @defgroup RNG_Exported_Constants - * @{ - */ - -/** @defgroup RNG_flags_definition - * @{ - */ -#define RNG_FLAG_DRDY ((uint8_t)0x0001) /*!< Data ready */ -#define RNG_FLAG_CECS ((uint8_t)0x0002) /*!< Clock error current status */ -#define RNG_FLAG_SECS ((uint8_t)0x0004) /*!< Seed error current status */ - -#define IS_RNG_GET_FLAG(RNG_FLAG) (((RNG_FLAG) == RNG_FLAG_DRDY) || \ - ((RNG_FLAG) == RNG_FLAG_CECS) || \ - ((RNG_FLAG) == RNG_FLAG_SECS)) -#define IS_RNG_CLEAR_FLAG(RNG_FLAG) (((RNG_FLAG) == RNG_FLAG_CECS) || \ - ((RNG_FLAG) == RNG_FLAG_SECS)) -/** - * @} - */ - -/** @defgroup RNG_interrupts_definition - * @{ - */ -#define RNG_IT_CEI ((uint8_t)0x20) /*!< Clock error interrupt */ -#define RNG_IT_SEI ((uint8_t)0x40) /*!< Seed error interrupt */ - -#define IS_RNG_IT(IT) ((((IT) & (uint8_t)0x9F) == 0x00) && ((IT) != 0x00)) -#define IS_RNG_GET_IT(RNG_IT) (((RNG_IT) == RNG_IT_CEI) || ((RNG_IT) == RNG_IT_SEI)) -/** - * @} - */ - -/** - * @} - */ - -/* Exported macro ------------------------------------------------------------*/ -/* Exported functions --------------------------------------------------------*/ - -/* Function used to set the RNG configuration to the default reset state *****/ -void RNG_DeInit(void); - -/* Configuration function *****************************************************/ -void RNG_Cmd(FunctionalState NewState); - -/* Get 32 bit Random number function ******************************************/ -uint32_t RNG_GetRandomNumber(void); - -/* Interrupts and flags management functions **********************************/ -void RNG_ITConfig(FunctionalState NewState); -FlagStatus RNG_GetFlagStatus(uint8_t RNG_FLAG); -void RNG_ClearFlag(uint8_t RNG_FLAG); -ITStatus RNG_GetITStatus(uint8_t RNG_IT); -void RNG_ClearITPendingBit(uint8_t RNG_IT); - -#ifdef __cplusplus -} -#endif - -#endif /*__STM32F4xx_RNG_H */ - -/** - * @} - */ - -/** - * @} - */ - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/stm/lib/stm32f4xx_rtc.c b/stm/lib/stm32f4xx_rtc.c deleted file mode 100644 index 5d96db5a3..000000000 --- a/stm/lib/stm32f4xx_rtc.c +++ /dev/null @@ -1,2761 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f4xx_rtc.c - * @author MCD Application Team - * @version V1.3.0 - * @date 08-November-2013 - * @brief This file provides firmware functions to manage the following - * functionalities of the Real-Time Clock (RTC) peripheral: - * + Initialization - * + Calendar (Time and Date) configuration - * + Alarms (Alarm A and Alarm B) configuration - * + WakeUp Timer configuration - * + Daylight Saving configuration - * + Output pin Configuration - * + Coarse digital Calibration configuration - * + Smooth digital Calibration configuration - * + TimeStamp configuration - * + Tampers configuration - * + Backup Data Registers configuration - * + Shift control synchronisation - * + RTC Tamper and TimeStamp Pins Selection and Output Type Config configuration - * + Interrupts and flags management - * -@verbatim - - =================================================================== - ##### Backup Domain Operating Condition ##### - =================================================================== - [..] The real-time clock (RTC), the RTC backup registers, and the backup - SRAM (BKP SRAM) can be powered from the VBAT voltage when the main - VDD supply is powered off. - To retain the content of the RTC backup registers, backup SRAM, and supply - the RTC when VDD is turned off, VBAT pin can be connected to an optional - standby voltage supplied by a battery or by another source. - - [..] To allow the RTC to operate even when the main digital supply (VDD) is turned - off, the VBAT pin powers the following blocks: - (#) The RTC - (#) The LSE oscillator - (#) The backup SRAM when the low power backup regulator is enabled - (#) PC13 to PC15 I/Os, plus PI8 I/O (when available) - - [..] When the backup domain is supplied by VDD (analog switch connected to VDD), - the following functions are available: - (#) PC14 and PC15 can be used as either GPIO or LSE pins - (#) PC13 can be used as a GPIO or as the RTC_AF1 pin - (#) PI8 can be used as a GPIO or as the RTC_AF2 pin - - [..] When the backup domain is supplied by VBAT (analog switch connected to VBAT - because VDD is not present), the following functions are available: - (#) PC14 and PC15 can be used as LSE pins only - (#) PC13 can be used as the RTC_AF1 pin - (#) PI8 can be used as the RTC_AF2 pin - - - ##### Backup Domain Reset ##### - =================================================================== - [..] The backup domain reset sets all RTC registers and the RCC_BDCR register - to their reset values. The BKPSRAM is not affected by this reset. The only - way of resetting the BKPSRAM is through the Flash interface by requesting - a protection level change from 1 to 0. - [..] A backup domain reset is generated when one of the following events occurs: - (#) Software reset, triggered by setting the BDRST bit in the - RCC Backup domain control register (RCC_BDCR). You can use the - RCC_BackupResetCmd(). - (#) VDD or VBAT power on, if both supplies have previously been powered off. - - - ##### Backup Domain Access ##### - =================================================================== - [..] After reset, the backup domain (RTC registers, RTC backup data - registers and backup SRAM) is protected against possible unwanted write - accesses. - [..] To enable access to the RTC Domain and RTC registers, proceed as follows: - (+) Enable the Power Controller (PWR) APB1 interface clock using the - RCC_APB1PeriphClockCmd() function. - (+) Enable access to RTC domain using the PWR_BackupAccessCmd() function. - (+) Select the RTC clock source using the RCC_RTCCLKConfig() function. - (+) Enable RTC Clock using the RCC_RTCCLKCmd() function. - - - ##### How to use RTC Driver ##### - =================================================================== - [..] - (+) Enable the RTC domain access (see description in the section above) - (+) Configure the RTC Prescaler (Asynchronous and Synchronous) and RTC hour - format using the RTC_Init() function. - - *** Time and Date configuration *** - =================================== - [..] - (+) To configure the RTC Calendar (Time and Date) use the RTC_SetTime() - and RTC_SetDate() functions. - (+) To read the RTC Calendar, use the RTC_GetTime() and RTC_GetDate() functions. - (+) Use the RTC_DayLightSavingConfig() function to add or sub one - hour to the RTC Calendar. - - *** Alarm configuration *** - =========================== - [..] - (+) To configure the RTC Alarm use the RTC_SetAlarm() function. - (+) Enable the selected RTC Alarm using the RTC_AlarmCmd() function - (+) To read the RTC Alarm, use the RTC_GetAlarm() function. - (+) To read the RTC alarm SubSecond, use the RTC_GetAlarmSubSecond() function. - - *** RTC Wakeup configuration *** - ================================ - [..] - (+) Configure the RTC Wakeup Clock source use the RTC_WakeUpClockConfig() - function. - (+) Configure the RTC WakeUp Counter using the RTC_SetWakeUpCounter() function - (+) Enable the RTC WakeUp using the RTC_WakeUpCmd() function - (+) To read the RTC WakeUp Counter register, use the RTC_GetWakeUpCounter() - function. - - *** Outputs configuration *** - ============================= - [..] The RTC has 2 different outputs: - (+) AFO_ALARM: this output is used to manage the RTC Alarm A, Alarm B - and WaKeUp signals. To output the selected RTC signal on RTC_AF1 pin, use the - RTC_OutputConfig() function. - (+) AFO_CALIB: this output is 512Hz signal or 1Hz. To output the RTC Clock on - RTC_AF1 pin, use the RTC_CalibOutputCmd() function. - - *** Smooth digital Calibration configuration *** - ================================================ - [..] - (+) Configure the RTC Original Digital Calibration Value and the corresponding - calibration cycle period (32s,16s and 8s) using the RTC_SmoothCalibConfig() - function. - - *** Coarse digital Calibration configuration *** - ================================================ - [..] - (+) Configure the RTC Coarse Calibration Value and the corresponding - sign using the RTC_CoarseCalibConfig() function. - (+) Enable the RTC Coarse Calibration using the RTC_CoarseCalibCmd() function - - *** TimeStamp configuration *** - =============================== - [..] - (+) Configure the RTC_AF1 trigger and enables the RTC TimeStamp using the RTC - _TimeStampCmd() function. - (+) To read the RTC TimeStamp Time and Date register, use the RTC_GetTimeStamp() - function. - (+) To read the RTC TimeStamp SubSecond register, use the - RTC_GetTimeStampSubSecond() function. - (+) The TAMPER1 alternate function can be mapped either to RTC_AF1(PC13) - or RTC_AF2 (PI8) depending on the value of TAMP1INSEL bit in - RTC_TAFCR register. You can use the RTC_TamperPinSelection() function to - select the corresponding pin. - - *** Tamper configuration *** - ============================ - [..] - (+) Enable the RTC Tamper using the RTC_TamperCmd() function. - (+) Configure the Tamper filter count using RTC_TamperFilterConfig() - function. - (+) Configure the RTC Tamper trigger Edge or Level according to the Tamper - filter (if equal to 0 Edge else Level) value using the RTC_TamperConfig() - function. - (+) Configure the Tamper sampling frequency using RTC_TamperSamplingFreqConfig() - function. - (+) Configure the Tamper precharge or discharge duration using - RTC_TamperPinsPrechargeDuration() function. - (+) Enable the Tamper Pull-UP using RTC_TamperPullUpDisableCmd() function. - (+) Enable the Time stamp on Tamper detection event using - TC_TSOnTamperDetecCmd() function. - (+) The TIMESTAMP alternate function can be mapped to either RTC_AF1 - or RTC_AF2 depending on the value of the TSINSEL bit in the RTC_TAFCR - register. You can use the RTC_TimeStampPinSelection() function to select - the corresponding pin. - - *** Backup Data Registers configuration *** - =========================================== - [..] - (+) To write to the RTC Backup Data registers, use the RTC_WriteBackupRegister() - function. - (+) To read the RTC Backup Data registers, use the RTC_ReadBackupRegister() - function. - - - ##### RTC and low power modes ##### - =================================================================== - [..] The MCU can be woken up from a low power mode by an RTC alternate - function. - [..] The RTC alternate functions are the RTC alarms (Alarm A and Alarm B), - RTC wakeup, RTC tamper event detection and RTC time stamp event detection. - These RTC alternate functions can wake up the system from the Stop and - Standby lowpower modes. - [..] The system can also wake up from low power modes without depending - on an external interrupt (Auto-wakeup mode), by using the RTC alarm - or the RTC wakeup events. - [..] The RTC provides a programmable time base for waking up from the - Stop or Standby mode at regular intervals. - Wakeup from STOP and Standby modes is possible only when the RTC clock source - is LSE or LSI. - - - ##### Selection of RTC_AF1 alternate functions ##### - =================================================================== - [..] The RTC_AF1 pin (PC13) can be used for the following purposes: - (+) AFO_ALARM output - (+) AFO_CALIB output - (+) AFI_TAMPER - (+) AFI_TIMESTAMP - - [..] - +-------------------------------------------------------------------------------------------------------------+ - | Pin |AFO_ALARM |AFO_CALIB |AFI_TAMPER |AFI_TIMESTAMP | TAMP1INSEL | TSINSEL |ALARMOUTTYPE | - | configuration | ENABLED | ENABLED | ENABLED | ENABLED |TAMPER1 pin |TIMESTAMP pin | AFO_ALARM | - | and function | | | | | selection | selection |Configuration | - |-----------------|----------|----------|-----------|--------------|------------|--------------|--------------| - | Alarm out | | | | | Don't | Don't | | - | output OD | 1 |Don't care|Don't care | Don't care | care | care | 0 | - |-----------------|----------|----------|-----------|--------------|------------|--------------|--------------| - | Alarm out | | | | | Don't | Don't | | - | output PP | 1 |Don't care|Don't care | Don't care | care | care | 1 | - |-----------------|----------|----------|-----------|--------------|------------|--------------|--------------| - | Calibration out | | | | | Don't | Don't | | - | output PP | 0 | 1 |Don't care | Don't care | care | care | Don't care | - |-----------------|----------|----------|-----------|--------------|------------|--------------|--------------| - | TAMPER input | | | | | | Don't | | - | floating | 0 | 0 | 1 | 0 | 0 | care | Don't care | - |-----------------|----------|----------|-----------|--------------|------------|--------------|--------------| - | TIMESTAMP and | | | | | | | | - | TAMPER input | 0 | 0 | 1 | 1 | 0 | 0 | Don't care | - | floating | | | | | | | | - |-----------------|----------|----------|-----------|--------------|------------|--------------|--------------| - | TIMESTAMP input | | | | | Don't | | | - | floating | 0 | 0 | 0 | 1 | care | 0 | Don't care | - |-----------------|----------|----------|-----------|--------------|------------|--------------|--------------| - | Standard GPIO | 0 | 0 | 0 | 0 | Don't care | Don't care | Don't care | - +-------------------------------------------------------------------------------------------------------------+ - - - ##### Selection of RTC_AF2 alternate functions ##### - =================================================================== - [..] The RTC_AF2 pin (PI8) can be used for the following purposes: - (+) AFI_TAMPER - (+) AFI_TIMESTAMP - [..] - +---------------------------------------------------------------------------------------+ - | Pin |AFI_TAMPER |AFI_TIMESTAMP | TAMP1INSEL | TSINSEL |ALARMOUTTYPE | - | configuration | ENABLED | ENABLED |TAMPER1 pin |TIMESTAMP pin | AFO_ALARM | - | and function | | | selection | selection |Configuration | - |-----------------|-----------|--------------|------------|--------------|--------------| - | TAMPER input | | | | Don't | | - | floating | 1 | 0 | 1 | care | Don't care | - |-----------------|-----------|--------------|------------|--------------|--------------| - | TIMESTAMP and | | | | | | - | TAMPER input | 1 | 1 | 1 | 1 | Don't care | - | floating | | | | | | - |-----------------|-----------|--------------|------------|--------------|--------------| - | TIMESTAMP input | | | Don't | | | - | floating | 0 | 1 | care | 1 | Don't care | - |-----------------|-----------|--------------|------------|--------------|--------------| - | Standard GPIO | 0 | 0 | Don't care | Don't care | Don't care | - +---------------------------------------------------------------------------------------+ - - -@endverbatim - - ****************************************************************************** - * @attention - * - *

© COPYRIGHT 2013 STMicroelectronics

- * - * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License"); - * You may not use this file except in compliance with the License. - * You may obtain a copy of the License at: - * - * http://www.st.com/software_license_agreement_liberty_v2 - * - * Unless required by applicable law or agreed to in writing, software - * distributed under the License is distributed on an "AS IS" BASIS, - * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - * See the License for the specific language governing permissions and - * limitations under the License. - * - ****************************************************************************** - */ - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx_rtc.h" - -/** @addtogroup STM32F4xx_StdPeriph_Driver - * @{ - */ - -/** @defgroup RTC - * @brief RTC driver modules - * @{ - */ - -/* Private typedef -----------------------------------------------------------*/ -/* Private define ------------------------------------------------------------*/ - -/* Masks Definition */ -#define RTC_TR_RESERVED_MASK ((uint32_t)0x007F7F7F) -#define RTC_DR_RESERVED_MASK ((uint32_t)0x00FFFF3F) -#define RTC_INIT_MASK ((uint32_t)0xFFFFFFFF) -#define RTC_RSF_MASK ((uint32_t)0xFFFFFF5F) -#define RTC_FLAGS_MASK ((uint32_t)(RTC_FLAG_TSOVF | RTC_FLAG_TSF | RTC_FLAG_WUTF | \ - RTC_FLAG_ALRBF | RTC_FLAG_ALRAF | RTC_FLAG_INITF | \ - RTC_FLAG_RSF | RTC_FLAG_INITS | RTC_FLAG_WUTWF | \ - RTC_FLAG_ALRBWF | RTC_FLAG_ALRAWF | RTC_FLAG_TAMP1F | \ - RTC_FLAG_RECALPF | RTC_FLAG_SHPF)) - -#define INITMODE_TIMEOUT ((uint32_t) 0x00010000) -#define SYNCHRO_TIMEOUT ((uint32_t) 0x00020000) -#define RECALPF_TIMEOUT ((uint32_t) 0x00020000) -#define SHPF_TIMEOUT ((uint32_t) 0x00001000) - -/* Private macro -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -/* Private function prototypes -----------------------------------------------*/ -static uint8_t RTC_ByteToBcd2(uint8_t Value); -static uint8_t RTC_Bcd2ToByte(uint8_t Value); - -/* Private functions ---------------------------------------------------------*/ - -/** @defgroup RTC_Private_Functions - * @{ - */ - -/** @defgroup RTC_Group1 Initialization and Configuration functions - * @brief Initialization and Configuration functions - * -@verbatim - =============================================================================== - ##### Initialization and Configuration functions ##### - =============================================================================== - - [..] This section provide functions allowing to initialize and configure the RTC - Prescaler (Synchronous and Asynchronous), RTC Hour format, disable RTC registers - Write protection, enter and exit the RTC initialization mode, RTC registers - synchronization check and reference clock detection enable. - - (#) The RTC Prescaler is programmed to generate the RTC 1Hz time base. It is - split into 2 programmable prescalers to minimize power consumption. - (++) A 7-bit asynchronous prescaler and A 13-bit synchronous prescaler. - (++) When both prescalers are used, it is recommended to configure the - asynchronous prescaler to a high value to minimize consumption. - - (#) All RTC registers are Write protected. Writing to the RTC registers - is enabled by writing a key into the Write Protection register, RTC_WPR. - - (#) To Configure the RTC Calendar, user application should enter initialization - mode. In this mode, the calendar counter is stopped and its value can be - updated. When the initialization sequence is complete, the calendar restarts - counting after 4 RTCCLK cycles. - - (#) To read the calendar through the shadow registers after Calendar initialization, - calendar update or after wakeup from low power modes the software must first - clear the RSF flag. The software must then wait until it is set again before - reading the calendar, which means that the calendar registers have been - correctly copied into the RTC_TR and RTC_DR shadow registers. - The RTC_WaitForSynchro() function implements the above software sequence - (RSF clear and RSF check). - -@endverbatim - * @{ - */ - -/** - * @brief Deinitializes the RTC registers to their default reset values. - * @note This function doesn't reset the RTC Clock source and RTC Backup Data - * registers. - * @param None - * @retval An ErrorStatus enumeration value: - * - SUCCESS: RTC registers are deinitialized - * - ERROR: RTC registers are not deinitialized - */ -ErrorStatus RTC_DeInit(void) -{ - __IO uint32_t wutcounter = 0x00; - uint32_t wutwfstatus = 0x00; - ErrorStatus status = ERROR; - - /* Disable the write protection for RTC registers */ - RTC->WPR = 0xCA; - RTC->WPR = 0x53; - - /* Set Initialization mode */ - if (RTC_EnterInitMode() == ERROR) - { - status = ERROR; - } - else - { - /* Reset TR, DR and CR registers */ - RTC->TR = (uint32_t)0x00000000; - RTC->DR = (uint32_t)0x00002101; - /* Reset All CR bits except CR[2:0] */ - RTC->CR &= (uint32_t)0x00000007; - - /* Wait till RTC WUTWF flag is set and if Time out is reached exit */ - do - { - wutwfstatus = RTC->ISR & RTC_ISR_WUTWF; - wutcounter++; - } while((wutcounter != INITMODE_TIMEOUT) && (wutwfstatus == 0x00)); - - if ((RTC->ISR & RTC_ISR_WUTWF) == RESET) - { - status = ERROR; - } - else - { - /* Reset all RTC CR register bits */ - RTC->CR &= (uint32_t)0x00000000; - RTC->WUTR = (uint32_t)0x0000FFFF; - RTC->PRER = (uint32_t)0x007F00FF; - RTC->CALIBR = (uint32_t)0x00000000; - RTC->ALRMAR = (uint32_t)0x00000000; - RTC->ALRMBR = (uint32_t)0x00000000; - RTC->SHIFTR = (uint32_t)0x00000000; - RTC->CALR = (uint32_t)0x00000000; - RTC->ALRMASSR = (uint32_t)0x00000000; - RTC->ALRMBSSR = (uint32_t)0x00000000; - - /* Reset ISR register and exit initialization mode */ - RTC->ISR = (uint32_t)0x00000000; - - /* Reset Tamper and alternate functions configuration register */ - RTC->TAFCR = 0x00000000; - - if(RTC_WaitForSynchro() == ERROR) - { - status = ERROR; - } - else - { - status = SUCCESS; - } - } - } - - /* Enable the write protection for RTC registers */ - RTC->WPR = 0xFF; - - return status; -} - -/** - * @brief Initializes the RTC registers according to the specified parameters - * in RTC_InitStruct. - * @param RTC_InitStruct: pointer to a RTC_InitTypeDef structure that contains - * the configuration information for the RTC peripheral. - * @note The RTC Prescaler register is write protected and can be written in - * initialization mode only. - * @retval An ErrorStatus enumeration value: - * - SUCCESS: RTC registers are initialized - * - ERROR: RTC registers are not initialized - */ -ErrorStatus RTC_Init(RTC_InitTypeDef* RTC_InitStruct) -{ - ErrorStatus status = ERROR; - - /* Check the parameters */ - assert_param(IS_RTC_HOUR_FORMAT(RTC_InitStruct->RTC_HourFormat)); - assert_param(IS_RTC_ASYNCH_PREDIV(RTC_InitStruct->RTC_AsynchPrediv)); - assert_param(IS_RTC_SYNCH_PREDIV(RTC_InitStruct->RTC_SynchPrediv)); - - /* Disable the write protection for RTC registers */ - RTC->WPR = 0xCA; - RTC->WPR = 0x53; - - /* Set Initialization mode */ - if (RTC_EnterInitMode() == ERROR) - { - status = ERROR; - } - else - { - /* Clear RTC CR FMT Bit */ - RTC->CR &= ((uint32_t)~(RTC_CR_FMT)); - /* Set RTC_CR register */ - RTC->CR |= ((uint32_t)(RTC_InitStruct->RTC_HourFormat)); - - /* Configure the RTC PRER */ - RTC->PRER = (uint32_t)(RTC_InitStruct->RTC_SynchPrediv); - RTC->PRER |= (uint32_t)(RTC_InitStruct->RTC_AsynchPrediv << 16); - - /* Exit Initialization mode */ - RTC_ExitInitMode(); - - status = SUCCESS; - } - /* Enable the write protection for RTC registers */ - RTC->WPR = 0xFF; - - return status; -} - -/** - * @brief Fills each RTC_InitStruct member with its default value. - * @param RTC_InitStruct: pointer to a RTC_InitTypeDef structure which will be - * initialized. - * @retval None - */ -void RTC_StructInit(RTC_InitTypeDef* RTC_InitStruct) -{ - /* Initialize the RTC_HourFormat member */ - RTC_InitStruct->RTC_HourFormat = RTC_HourFormat_24; - - /* Initialize the RTC_AsynchPrediv member */ - RTC_InitStruct->RTC_AsynchPrediv = (uint32_t)0x7F; - - /* Initialize the RTC_SynchPrediv member */ - RTC_InitStruct->RTC_SynchPrediv = (uint32_t)0xFF; -} - -/** - * @brief Enables or disables the RTC registers write protection. - * @note All the RTC registers are write protected except for RTC_ISR[13:8], - * RTC_TAFCR and RTC_BKPxR. - * @note Writing a wrong key reactivates the write protection. - * @note The protection mechanism is not affected by system reset. - * @param NewState: new state of the write protection. - * This parameter can be: ENABLE or DISABLE. - * @retval None - */ -void RTC_WriteProtectionCmd(FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_FUNCTIONAL_STATE(NewState)); - - if (NewState != DISABLE) - { - /* Enable the write protection for RTC registers */ - RTC->WPR = 0xFF; - } - else - { - /* Disable the write protection for RTC registers */ - RTC->WPR = 0xCA; - RTC->WPR = 0x53; - } -} - -/** - * @brief Enters the RTC Initialization mode. - * @note The RTC Initialization mode is write protected, use the - * RTC_WriteProtectionCmd(DISABLE) before calling this function. - * @param None - * @retval An ErrorStatus enumeration value: - * - SUCCESS: RTC is in Init mode - * - ERROR: RTC is not in Init mode - */ -ErrorStatus RTC_EnterInitMode(void) -{ - __IO uint32_t initcounter = 0x00; - ErrorStatus status = ERROR; - uint32_t initstatus = 0x00; - - /* Check if the Initialization mode is set */ - if ((RTC->ISR & RTC_ISR_INITF) == (uint32_t)RESET) - { - /* Set the Initialization mode */ - RTC->ISR = (uint32_t)RTC_INIT_MASK; - - /* Wait till RTC is in INIT state and if Time out is reached exit */ - do - { - initstatus = RTC->ISR & RTC_ISR_INITF; - initcounter++; - } while((initcounter != INITMODE_TIMEOUT) && (initstatus == 0x00)); - - if ((RTC->ISR & RTC_ISR_INITF) != RESET) - { - status = SUCCESS; - } - else - { - status = ERROR; - } - } - else - { - status = SUCCESS; - } - - return (status); -} - -/** - * @brief Exits the RTC Initialization mode. - * @note When the initialization sequence is complete, the calendar restarts - * counting after 4 RTCCLK cycles. - * @note The RTC Initialization mode is write protected, use the - * RTC_WriteProtectionCmd(DISABLE) before calling this function. - * @param None - * @retval None - */ -void RTC_ExitInitMode(void) -{ - /* Exit Initialization mode */ - RTC->ISR &= (uint32_t)~RTC_ISR_INIT; -} - -/** - * @brief Waits until the RTC Time and Date registers (RTC_TR and RTC_DR) are - * synchronized with RTC APB clock. - * @note The RTC Resynchronization mode is write protected, use the - * RTC_WriteProtectionCmd(DISABLE) before calling this function. - * @note To read the calendar through the shadow registers after Calendar - * initialization, calendar update or after wakeup from low power modes - * the software must first clear the RSF flag. - * The software must then wait until it is set again before reading - * the calendar, which means that the calendar registers have been - * correctly copied into the RTC_TR and RTC_DR shadow registers. - * @param None - * @retval An ErrorStatus enumeration value: - * - SUCCESS: RTC registers are synchronised - * - ERROR: RTC registers are not synchronised - */ -ErrorStatus RTC_WaitForSynchro(void) -{ - __IO uint32_t synchrocounter = 0; - ErrorStatus status = ERROR; - uint32_t synchrostatus = 0x00; - - /* Disable the write protection for RTC registers */ - RTC->WPR = 0xCA; - RTC->WPR = 0x53; - - /* Clear RSF flag */ - RTC->ISR &= (uint32_t)RTC_RSF_MASK; - - /* Wait the registers to be synchronised */ - do - { - synchrostatus = RTC->ISR & RTC_ISR_RSF; - synchrocounter++; - } while((synchrocounter != SYNCHRO_TIMEOUT) && (synchrostatus == 0x00)); - - if ((RTC->ISR & RTC_ISR_RSF) != RESET) - { - status = SUCCESS; - } - else - { - status = ERROR; - } - - /* Enable the write protection for RTC registers */ - RTC->WPR = 0xFF; - - return (status); -} - -/** - * @brief Enables or disables the RTC reference clock detection. - * @param NewState: new state of the RTC reference clock. - * This parameter can be: ENABLE or DISABLE. - * @retval An ErrorStatus enumeration value: - * - SUCCESS: RTC reference clock detection is enabled - * - ERROR: RTC reference clock detection is disabled - */ -ErrorStatus RTC_RefClockCmd(FunctionalState NewState) -{ - ErrorStatus status = ERROR; - - /* Check the parameters */ - assert_param(IS_FUNCTIONAL_STATE(NewState)); - - /* Disable the write protection for RTC registers */ - RTC->WPR = 0xCA; - RTC->WPR = 0x53; - - /* Set Initialization mode */ - if (RTC_EnterInitMode() == ERROR) - { - status = ERROR; - } - else - { - if (NewState != DISABLE) - { - /* Enable the RTC reference clock detection */ - RTC->CR |= RTC_CR_REFCKON; - } - else - { - /* Disable the RTC reference clock detection */ - RTC->CR &= ~RTC_CR_REFCKON; - } - /* Exit Initialization mode */ - RTC_ExitInitMode(); - - status = SUCCESS; - } - - /* Enable the write protection for RTC registers */ - RTC->WPR = 0xFF; - - return status; -} - -/** - * @brief Enables or Disables the Bypass Shadow feature. - * @note When the Bypass Shadow is enabled the calendar value are taken - * directly from the Calendar counter. - * @param NewState: new state of the Bypass Shadow feature. - * This parameter can be: ENABLE or DISABLE. - * @retval None -*/ -void RTC_BypassShadowCmd(FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_FUNCTIONAL_STATE(NewState)); - - /* Disable the write protection for RTC registers */ - RTC->WPR = 0xCA; - RTC->WPR = 0x53; - - if (NewState != DISABLE) - { - /* Set the BYPSHAD bit */ - RTC->CR |= (uint8_t)RTC_CR_BYPSHAD; - } - else - { - /* Reset the BYPSHAD bit */ - RTC->CR &= (uint8_t)~RTC_CR_BYPSHAD; - } - - /* Enable the write protection for RTC registers */ - RTC->WPR = 0xFF; -} - -/** - * @} - */ - -/** @defgroup RTC_Group2 Time and Date configuration functions - * @brief Time and Date configuration functions - * -@verbatim - =============================================================================== - ##### Time and Date configuration functions ##### - =============================================================================== - - [..] This section provide functions allowing to program and read the RTC Calendar - (Time and Date). - -@endverbatim - * @{ - */ - -/** - * @brief Set the RTC current time. - * @param RTC_Format: specifies the format of the entered parameters. - * This parameter can be one of the following values: - * @arg RTC_Format_BIN: Binary data format - * @arg RTC_Format_BCD: BCD data format - * @param RTC_TimeStruct: pointer to a RTC_TimeTypeDef structure that contains - * the time configuration information for the RTC. - * @retval An ErrorStatus enumeration value: - * - SUCCESS: RTC Time register is configured - * - ERROR: RTC Time register is not configured - */ -ErrorStatus RTC_SetTime(uint32_t RTC_Format, RTC_TimeTypeDef* RTC_TimeStruct) -{ - uint32_t tmpreg = 0; - ErrorStatus status = ERROR; - - /* Check the parameters */ - assert_param(IS_RTC_FORMAT(RTC_Format)); - - if (RTC_Format == RTC_Format_BIN) - { - if ((RTC->CR & RTC_CR_FMT) != (uint32_t)RESET) - { - assert_param(IS_RTC_HOUR12(RTC_TimeStruct->RTC_Hours)); - assert_param(IS_RTC_H12(RTC_TimeStruct->RTC_H12)); - } - else - { - RTC_TimeStruct->RTC_H12 = 0x00; - assert_param(IS_RTC_HOUR24(RTC_TimeStruct->RTC_Hours)); - } - assert_param(IS_RTC_MINUTES(RTC_TimeStruct->RTC_Minutes)); - assert_param(IS_RTC_SECONDS(RTC_TimeStruct->RTC_Seconds)); - } - else - { - if ((RTC->CR & RTC_CR_FMT) != (uint32_t)RESET) - { - tmpreg = RTC_Bcd2ToByte(RTC_TimeStruct->RTC_Hours); - assert_param(IS_RTC_HOUR12(tmpreg)); - assert_param(IS_RTC_H12(RTC_TimeStruct->RTC_H12)); - } - else - { - RTC_TimeStruct->RTC_H12 = 0x00; - assert_param(IS_RTC_HOUR24(RTC_Bcd2ToByte(RTC_TimeStruct->RTC_Hours))); - } - assert_param(IS_RTC_MINUTES(RTC_Bcd2ToByte(RTC_TimeStruct->RTC_Minutes))); - assert_param(IS_RTC_SECONDS(RTC_Bcd2ToByte(RTC_TimeStruct->RTC_Seconds))); - } - - /* Check the input parameters format */ - if (RTC_Format != RTC_Format_BIN) - { - tmpreg = (((uint32_t)(RTC_TimeStruct->RTC_Hours) << 16) | \ - ((uint32_t)(RTC_TimeStruct->RTC_Minutes) << 8) | \ - ((uint32_t)RTC_TimeStruct->RTC_Seconds) | \ - ((uint32_t)(RTC_TimeStruct->RTC_H12) << 16)); - } - else - { - tmpreg = (uint32_t)(((uint32_t)RTC_ByteToBcd2(RTC_TimeStruct->RTC_Hours) << 16) | \ - ((uint32_t)RTC_ByteToBcd2(RTC_TimeStruct->RTC_Minutes) << 8) | \ - ((uint32_t)RTC_ByteToBcd2(RTC_TimeStruct->RTC_Seconds)) | \ - (((uint32_t)RTC_TimeStruct->RTC_H12) << 16)); - } - - /* Disable the write protection for RTC registers */ - RTC->WPR = 0xCA; - RTC->WPR = 0x53; - - /* Set Initialization mode */ - if (RTC_EnterInitMode() == ERROR) - { - status = ERROR; - } - else - { - /* Set the RTC_TR register */ - RTC->TR = (uint32_t)(tmpreg & RTC_TR_RESERVED_MASK); - - /* Exit Initialization mode */ - RTC_ExitInitMode(); - - /* If RTC_CR_BYPSHAD bit = 0, wait for synchro else this check is not needed */ - if ((RTC->CR & RTC_CR_BYPSHAD) == RESET) - { - if(RTC_WaitForSynchro() == ERROR) - { - status = ERROR; - } - else - { - status = SUCCESS; - } - } - else - { - status = SUCCESS; - } - } - /* Enable the write protection for RTC registers */ - RTC->WPR = 0xFF; - - return status; -} - -/** - * @brief Fills each RTC_TimeStruct member with its default value - * (Time = 00h:00min:00sec). - * @param RTC_TimeStruct: pointer to a RTC_TimeTypeDef structure which will be - * initialized. - * @retval None - */ -void RTC_TimeStructInit(RTC_TimeTypeDef* RTC_TimeStruct) -{ - /* Time = 00h:00min:00sec */ - RTC_TimeStruct->RTC_H12 = RTC_H12_AM; - RTC_TimeStruct->RTC_Hours = 0; - RTC_TimeStruct->RTC_Minutes = 0; - RTC_TimeStruct->RTC_Seconds = 0; -} - -/** - * @brief Get the RTC current Time. - * @param RTC_Format: specifies the format of the returned parameters. - * This parameter can be one of the following values: - * @arg RTC_Format_BIN: Binary data format - * @arg RTC_Format_BCD: BCD data format - * @param RTC_TimeStruct: pointer to a RTC_TimeTypeDef structure that will - * contain the returned current time configuration. - * @retval None - */ -void RTC_GetTime(uint32_t RTC_Format, RTC_TimeTypeDef* RTC_TimeStruct) -{ - uint32_t tmpreg = 0; - - /* Check the parameters */ - assert_param(IS_RTC_FORMAT(RTC_Format)); - - /* Get the RTC_TR register */ - tmpreg = (uint32_t)(RTC->TR & RTC_TR_RESERVED_MASK); - - /* Fill the structure fields with the read parameters */ - RTC_TimeStruct->RTC_Hours = (uint8_t)((tmpreg & (RTC_TR_HT | RTC_TR_HU)) >> 16); - RTC_TimeStruct->RTC_Minutes = (uint8_t)((tmpreg & (RTC_TR_MNT | RTC_TR_MNU)) >>8); - RTC_TimeStruct->RTC_Seconds = (uint8_t)(tmpreg & (RTC_TR_ST | RTC_TR_SU)); - RTC_TimeStruct->RTC_H12 = (uint8_t)((tmpreg & (RTC_TR_PM)) >> 16); - - /* Check the input parameters format */ - if (RTC_Format == RTC_Format_BIN) - { - /* Convert the structure parameters to Binary format */ - RTC_TimeStruct->RTC_Hours = (uint8_t)RTC_Bcd2ToByte(RTC_TimeStruct->RTC_Hours); - RTC_TimeStruct->RTC_Minutes = (uint8_t)RTC_Bcd2ToByte(RTC_TimeStruct->RTC_Minutes); - RTC_TimeStruct->RTC_Seconds = (uint8_t)RTC_Bcd2ToByte(RTC_TimeStruct->RTC_Seconds); - } -} - -/** - * @brief Gets the RTC current Calendar Sub seconds value. - * @note This function freeze the Time and Date registers after reading the - * SSR register. - * @param None - * @retval RTC current Calendar Sub seconds value. - */ -uint32_t RTC_GetSubSecond(void) -{ - uint32_t tmpreg = 0; - - /* Get sub seconds values from the correspondent registers*/ - tmpreg = (uint32_t)(RTC->SSR); - - /* Read DR register to unfroze calendar registers */ - (void) (RTC->DR); - - return (tmpreg); -} - -/** - * @brief Set the RTC current date. - * @param RTC_Format: specifies the format of the entered parameters. - * This parameter can be one of the following values: - * @arg RTC_Format_BIN: Binary data format - * @arg RTC_Format_BCD: BCD data format - * @param RTC_DateStruct: pointer to a RTC_DateTypeDef structure that contains - * the date configuration information for the RTC. - * @retval An ErrorStatus enumeration value: - * - SUCCESS: RTC Date register is configured - * - ERROR: RTC Date register is not configured - */ -ErrorStatus RTC_SetDate(uint32_t RTC_Format, RTC_DateTypeDef* RTC_DateStruct) -{ - uint32_t tmpreg = 0; - ErrorStatus status = ERROR; - - /* Check the parameters */ - assert_param(IS_RTC_FORMAT(RTC_Format)); - - if ((RTC_Format == RTC_Format_BIN) && ((RTC_DateStruct->RTC_Month & 0x10) == 0x10)) - { - RTC_DateStruct->RTC_Month = (RTC_DateStruct->RTC_Month & (uint32_t)~(0x10)) + 0x0A; - } - if (RTC_Format == RTC_Format_BIN) - { - assert_param(IS_RTC_YEAR(RTC_DateStruct->RTC_Year)); - assert_param(IS_RTC_MONTH(RTC_DateStruct->RTC_Month)); - assert_param(IS_RTC_DATE(RTC_DateStruct->RTC_Date)); - } - else - { - assert_param(IS_RTC_YEAR(RTC_Bcd2ToByte(RTC_DateStruct->RTC_Year))); - tmpreg = RTC_Bcd2ToByte(RTC_DateStruct->RTC_Month); - assert_param(IS_RTC_MONTH(tmpreg)); - tmpreg = RTC_Bcd2ToByte(RTC_DateStruct->RTC_Date); - assert_param(IS_RTC_DATE(tmpreg)); - } - assert_param(IS_RTC_WEEKDAY(RTC_DateStruct->RTC_WeekDay)); - - /* Check the input parameters format */ - if (RTC_Format != RTC_Format_BIN) - { - tmpreg = ((((uint32_t)RTC_DateStruct->RTC_Year) << 16) | \ - (((uint32_t)RTC_DateStruct->RTC_Month) << 8) | \ - ((uint32_t)RTC_DateStruct->RTC_Date) | \ - (((uint32_t)RTC_DateStruct->RTC_WeekDay) << 13)); - } - else - { - tmpreg = (((uint32_t)RTC_ByteToBcd2(RTC_DateStruct->RTC_Year) << 16) | \ - ((uint32_t)RTC_ByteToBcd2(RTC_DateStruct->RTC_Month) << 8) | \ - ((uint32_t)RTC_ByteToBcd2(RTC_DateStruct->RTC_Date)) | \ - ((uint32_t)RTC_DateStruct->RTC_WeekDay << 13)); - } - - /* Disable the write protection for RTC registers */ - RTC->WPR = 0xCA; - RTC->WPR = 0x53; - - /* Set Initialization mode */ - if (RTC_EnterInitMode() == ERROR) - { - status = ERROR; - } - else - { - /* Set the RTC_DR register */ - RTC->DR = (uint32_t)(tmpreg & RTC_DR_RESERVED_MASK); - - /* Exit Initialization mode */ - RTC_ExitInitMode(); - - /* If RTC_CR_BYPSHAD bit = 0, wait for synchro else this check is not needed */ - if ((RTC->CR & RTC_CR_BYPSHAD) == RESET) - { - if(RTC_WaitForSynchro() == ERROR) - { - status = ERROR; - } - else - { - status = SUCCESS; - } - } - else - { - status = SUCCESS; - } - } - /* Enable the write protection for RTC registers */ - RTC->WPR = 0xFF; - - return status; -} - -/** - * @brief Fills each RTC_DateStruct member with its default value - * (Monday, January 01 xx00). - * @param RTC_DateStruct: pointer to a RTC_DateTypeDef structure which will be - * initialized. - * @retval None - */ -void RTC_DateStructInit(RTC_DateTypeDef* RTC_DateStruct) -{ - /* Monday, January 01 xx00 */ - RTC_DateStruct->RTC_WeekDay = RTC_Weekday_Monday; - RTC_DateStruct->RTC_Date = 1; - RTC_DateStruct->RTC_Month = RTC_Month_January; - RTC_DateStruct->RTC_Year = 0; -} - -/** - * @brief Get the RTC current date. - * @param RTC_Format: specifies the format of the returned parameters. - * This parameter can be one of the following values: - * @arg RTC_Format_BIN: Binary data format - * @arg RTC_Format_BCD: BCD data format - * @param RTC_DateStruct: pointer to a RTC_DateTypeDef structure that will - * contain the returned current date configuration. - * @retval None - */ -void RTC_GetDate(uint32_t RTC_Format, RTC_DateTypeDef* RTC_DateStruct) -{ - uint32_t tmpreg = 0; - - /* Check the parameters */ - assert_param(IS_RTC_FORMAT(RTC_Format)); - - /* Get the RTC_TR register */ - tmpreg = (uint32_t)(RTC->DR & RTC_DR_RESERVED_MASK); - - /* Fill the structure fields with the read parameters */ - RTC_DateStruct->RTC_Year = (uint8_t)((tmpreg & (RTC_DR_YT | RTC_DR_YU)) >> 16); - RTC_DateStruct->RTC_Month = (uint8_t)((tmpreg & (RTC_DR_MT | RTC_DR_MU)) >> 8); - RTC_DateStruct->RTC_Date = (uint8_t)(tmpreg & (RTC_DR_DT | RTC_DR_DU)); - RTC_DateStruct->RTC_WeekDay = (uint8_t)((tmpreg & (RTC_DR_WDU)) >> 13); - - /* Check the input parameters format */ - if (RTC_Format == RTC_Format_BIN) - { - /* Convert the structure parameters to Binary format */ - RTC_DateStruct->RTC_Year = (uint8_t)RTC_Bcd2ToByte(RTC_DateStruct->RTC_Year); - RTC_DateStruct->RTC_Month = (uint8_t)RTC_Bcd2ToByte(RTC_DateStruct->RTC_Month); - RTC_DateStruct->RTC_Date = (uint8_t)RTC_Bcd2ToByte(RTC_DateStruct->RTC_Date); - } -} - -/** - * @} - */ - -/** @defgroup RTC_Group3 Alarms configuration functions - * @brief Alarms (Alarm A and Alarm B) configuration functions - * -@verbatim - =============================================================================== - ##### Alarms A and B configuration functions ##### - =============================================================================== - - [..] This section provide functions allowing to program and read the RTC Alarms. - -@endverbatim - * @{ - */ - -/** - * @brief Set the specified RTC Alarm. - * @note The Alarm register can only be written when the corresponding Alarm - * is disabled (Use the RTC_AlarmCmd(DISABLE)). - * @param RTC_Format: specifies the format of the returned parameters. - * This parameter can be one of the following values: - * @arg RTC_Format_BIN: Binary data format - * @arg RTC_Format_BCD: BCD data format - * @param RTC_Alarm: specifies the alarm to be configured. - * This parameter can be one of the following values: - * @arg RTC_Alarm_A: to select Alarm A - * @arg RTC_Alarm_B: to select Alarm B - * @param RTC_AlarmStruct: pointer to a RTC_AlarmTypeDef structure that - * contains the alarm configuration parameters. - * @retval None - */ -void RTC_SetAlarm(uint32_t RTC_Format, uint32_t RTC_Alarm, RTC_AlarmTypeDef* RTC_AlarmStruct) -{ - uint32_t tmpreg = 0; - - /* Check the parameters */ - assert_param(IS_RTC_FORMAT(RTC_Format)); - assert_param(IS_RTC_ALARM(RTC_Alarm)); - assert_param(IS_ALARM_MASK(RTC_AlarmStruct->RTC_AlarmMask)); - assert_param(IS_RTC_ALARM_DATE_WEEKDAY_SEL(RTC_AlarmStruct->RTC_AlarmDateWeekDaySel)); - - if (RTC_Format == RTC_Format_BIN) - { - if ((RTC->CR & RTC_CR_FMT) != (uint32_t)RESET) - { - assert_param(IS_RTC_HOUR12(RTC_AlarmStruct->RTC_AlarmTime.RTC_Hours)); - assert_param(IS_RTC_H12(RTC_AlarmStruct->RTC_AlarmTime.RTC_H12)); - } - else - { - RTC_AlarmStruct->RTC_AlarmTime.RTC_H12 = 0x00; - assert_param(IS_RTC_HOUR24(RTC_AlarmStruct->RTC_AlarmTime.RTC_Hours)); - } - assert_param(IS_RTC_MINUTES(RTC_AlarmStruct->RTC_AlarmTime.RTC_Minutes)); - assert_param(IS_RTC_SECONDS(RTC_AlarmStruct->RTC_AlarmTime.RTC_Seconds)); - - if(RTC_AlarmStruct->RTC_AlarmDateWeekDaySel == RTC_AlarmDateWeekDaySel_Date) - { - assert_param(IS_RTC_ALARM_DATE_WEEKDAY_DATE(RTC_AlarmStruct->RTC_AlarmDateWeekDay)); - } - else - { - assert_param(IS_RTC_ALARM_DATE_WEEKDAY_WEEKDAY(RTC_AlarmStruct->RTC_AlarmDateWeekDay)); - } - } - else - { - if ((RTC->CR & RTC_CR_FMT) != (uint32_t)RESET) - { - tmpreg = RTC_Bcd2ToByte(RTC_AlarmStruct->RTC_AlarmTime.RTC_Hours); - assert_param(IS_RTC_HOUR12(tmpreg)); - assert_param(IS_RTC_H12(RTC_AlarmStruct->RTC_AlarmTime.RTC_H12)); - } - else - { - RTC_AlarmStruct->RTC_AlarmTime.RTC_H12 = 0x00; - assert_param(IS_RTC_HOUR24(RTC_Bcd2ToByte(RTC_AlarmStruct->RTC_AlarmTime.RTC_Hours))); - } - - assert_param(IS_RTC_MINUTES(RTC_Bcd2ToByte(RTC_AlarmStruct->RTC_AlarmTime.RTC_Minutes))); - assert_param(IS_RTC_SECONDS(RTC_Bcd2ToByte(RTC_AlarmStruct->RTC_AlarmTime.RTC_Seconds))); - - if(RTC_AlarmStruct->RTC_AlarmDateWeekDaySel == RTC_AlarmDateWeekDaySel_Date) - { - tmpreg = RTC_Bcd2ToByte(RTC_AlarmStruct->RTC_AlarmDateWeekDay); - assert_param(IS_RTC_ALARM_DATE_WEEKDAY_DATE(tmpreg)); - } - else - { - tmpreg = RTC_Bcd2ToByte(RTC_AlarmStruct->RTC_AlarmDateWeekDay); - assert_param(IS_RTC_ALARM_DATE_WEEKDAY_WEEKDAY(tmpreg)); - } - } - - /* Check the input parameters format */ - if (RTC_Format != RTC_Format_BIN) - { - tmpreg = (((uint32_t)(RTC_AlarmStruct->RTC_AlarmTime.RTC_Hours) << 16) | \ - ((uint32_t)(RTC_AlarmStruct->RTC_AlarmTime.RTC_Minutes) << 8) | \ - ((uint32_t)RTC_AlarmStruct->RTC_AlarmTime.RTC_Seconds) | \ - ((uint32_t)(RTC_AlarmStruct->RTC_AlarmTime.RTC_H12) << 16) | \ - ((uint32_t)(RTC_AlarmStruct->RTC_AlarmDateWeekDay) << 24) | \ - ((uint32_t)RTC_AlarmStruct->RTC_AlarmDateWeekDaySel) | \ - ((uint32_t)RTC_AlarmStruct->RTC_AlarmMask)); - } - else - { - tmpreg = (((uint32_t)RTC_ByteToBcd2(RTC_AlarmStruct->RTC_AlarmTime.RTC_Hours) << 16) | \ - ((uint32_t)RTC_ByteToBcd2(RTC_AlarmStruct->RTC_AlarmTime.RTC_Minutes) << 8) | \ - ((uint32_t)RTC_ByteToBcd2(RTC_AlarmStruct->RTC_AlarmTime.RTC_Seconds)) | \ - ((uint32_t)(RTC_AlarmStruct->RTC_AlarmTime.RTC_H12) << 16) | \ - ((uint32_t)RTC_ByteToBcd2(RTC_AlarmStruct->RTC_AlarmDateWeekDay) << 24) | \ - ((uint32_t)RTC_AlarmStruct->RTC_AlarmDateWeekDaySel) | \ - ((uint32_t)RTC_AlarmStruct->RTC_AlarmMask)); - } - - /* Disable the write protection for RTC registers */ - RTC->WPR = 0xCA; - RTC->WPR = 0x53; - - /* Configure the Alarm register */ - if (RTC_Alarm == RTC_Alarm_A) - { - RTC->ALRMAR = (uint32_t)tmpreg; - } - else - { - RTC->ALRMBR = (uint32_t)tmpreg; - } - - /* Enable the write protection for RTC registers */ - RTC->WPR = 0xFF; -} - -/** - * @brief Fills each RTC_AlarmStruct member with its default value - * (Time = 00h:00mn:00sec / Date = 1st day of the month/Mask = - * all fields are masked). - * @param RTC_AlarmStruct: pointer to a @ref RTC_AlarmTypeDef structure which - * will be initialized. - * @retval None - */ -void RTC_AlarmStructInit(RTC_AlarmTypeDef* RTC_AlarmStruct) -{ - /* Alarm Time Settings : Time = 00h:00mn:00sec */ - RTC_AlarmStruct->RTC_AlarmTime.RTC_H12 = RTC_H12_AM; - RTC_AlarmStruct->RTC_AlarmTime.RTC_Hours = 0; - RTC_AlarmStruct->RTC_AlarmTime.RTC_Minutes = 0; - RTC_AlarmStruct->RTC_AlarmTime.RTC_Seconds = 0; - - /* Alarm Date Settings : Date = 1st day of the month */ - RTC_AlarmStruct->RTC_AlarmDateWeekDaySel = RTC_AlarmDateWeekDaySel_Date; - RTC_AlarmStruct->RTC_AlarmDateWeekDay = 1; - - /* Alarm Masks Settings : Mask = all fields are not masked */ - RTC_AlarmStruct->RTC_AlarmMask = RTC_AlarmMask_None; -} - -/** - * @brief Get the RTC Alarm value and masks. - * @param RTC_Format: specifies the format of the output parameters. - * This parameter can be one of the following values: - * @arg RTC_Format_BIN: Binary data format - * @arg RTC_Format_BCD: BCD data format - * @param RTC_Alarm: specifies the alarm to be read. - * This parameter can be one of the following values: - * @arg RTC_Alarm_A: to select Alarm A - * @arg RTC_Alarm_B: to select Alarm B - * @param RTC_AlarmStruct: pointer to a RTC_AlarmTypeDef structure that will - * contains the output alarm configuration values. - * @retval None - */ -void RTC_GetAlarm(uint32_t RTC_Format, uint32_t RTC_Alarm, RTC_AlarmTypeDef* RTC_AlarmStruct) -{ - uint32_t tmpreg = 0; - - /* Check the parameters */ - assert_param(IS_RTC_FORMAT(RTC_Format)); - assert_param(IS_RTC_ALARM(RTC_Alarm)); - - /* Get the RTC_ALRMxR register */ - if (RTC_Alarm == RTC_Alarm_A) - { - tmpreg = (uint32_t)(RTC->ALRMAR); - } - else - { - tmpreg = (uint32_t)(RTC->ALRMBR); - } - - /* Fill the structure with the read parameters */ - RTC_AlarmStruct->RTC_AlarmTime.RTC_Hours = (uint32_t)((tmpreg & (RTC_ALRMAR_HT | \ - RTC_ALRMAR_HU)) >> 16); - RTC_AlarmStruct->RTC_AlarmTime.RTC_Minutes = (uint32_t)((tmpreg & (RTC_ALRMAR_MNT | \ - RTC_ALRMAR_MNU)) >> 8); - RTC_AlarmStruct->RTC_AlarmTime.RTC_Seconds = (uint32_t)(tmpreg & (RTC_ALRMAR_ST | \ - RTC_ALRMAR_SU)); - RTC_AlarmStruct->RTC_AlarmTime.RTC_H12 = (uint32_t)((tmpreg & RTC_ALRMAR_PM) >> 16); - RTC_AlarmStruct->RTC_AlarmDateWeekDay = (uint32_t)((tmpreg & (RTC_ALRMAR_DT | RTC_ALRMAR_DU)) >> 24); - RTC_AlarmStruct->RTC_AlarmDateWeekDaySel = (uint32_t)(tmpreg & RTC_ALRMAR_WDSEL); - RTC_AlarmStruct->RTC_AlarmMask = (uint32_t)(tmpreg & RTC_AlarmMask_All); - - if (RTC_Format == RTC_Format_BIN) - { - RTC_AlarmStruct->RTC_AlarmTime.RTC_Hours = RTC_Bcd2ToByte(RTC_AlarmStruct-> \ - RTC_AlarmTime.RTC_Hours); - RTC_AlarmStruct->RTC_AlarmTime.RTC_Minutes = RTC_Bcd2ToByte(RTC_AlarmStruct-> \ - RTC_AlarmTime.RTC_Minutes); - RTC_AlarmStruct->RTC_AlarmTime.RTC_Seconds = RTC_Bcd2ToByte(RTC_AlarmStruct-> \ - RTC_AlarmTime.RTC_Seconds); - RTC_AlarmStruct->RTC_AlarmDateWeekDay = RTC_Bcd2ToByte(RTC_AlarmStruct->RTC_AlarmDateWeekDay); - } -} - -/** - * @brief Enables or disables the specified RTC Alarm. - * @param RTC_Alarm: specifies the alarm to be configured. - * This parameter can be any combination of the following values: - * @arg RTC_Alarm_A: to select Alarm A - * @arg RTC_Alarm_B: to select Alarm B - * @param NewState: new state of the specified alarm. - * This parameter can be: ENABLE or DISABLE. - * @retval An ErrorStatus enumeration value: - * - SUCCESS: RTC Alarm is enabled/disabled - * - ERROR: RTC Alarm is not enabled/disabled - */ -ErrorStatus RTC_AlarmCmd(uint32_t RTC_Alarm, FunctionalState NewState) -{ - __IO uint32_t alarmcounter = 0x00; - uint32_t alarmstatus = 0x00; - ErrorStatus status = ERROR; - - /* Check the parameters */ - assert_param(IS_RTC_CMD_ALARM(RTC_Alarm)); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - - /* Disable the write protection for RTC registers */ - RTC->WPR = 0xCA; - RTC->WPR = 0x53; - - /* Configure the Alarm state */ - if (NewState != DISABLE) - { - RTC->CR |= (uint32_t)RTC_Alarm; - - status = SUCCESS; - } - else - { - /* Disable the Alarm in RTC_CR register */ - RTC->CR &= (uint32_t)~RTC_Alarm; - - /* Wait till RTC ALRxWF flag is set and if Time out is reached exit */ - do - { - alarmstatus = RTC->ISR & (RTC_Alarm >> 8); - alarmcounter++; - } while((alarmcounter != INITMODE_TIMEOUT) && (alarmstatus == 0x00)); - - if ((RTC->ISR & (RTC_Alarm >> 8)) == RESET) - { - status = ERROR; - } - else - { - status = SUCCESS; - } - } - - /* Enable the write protection for RTC registers */ - RTC->WPR = 0xFF; - - return status; -} - -/** - * @brief Configure the RTC AlarmA/B Sub seconds value and mask.* - * @note This function is performed only when the Alarm is disabled. - * @param RTC_Alarm: specifies the alarm to be configured. - * This parameter can be one of the following values: - * @arg RTC_Alarm_A: to select Alarm A - * @arg RTC_Alarm_B: to select Alarm B - * @param RTC_AlarmSubSecondValue: specifies the Sub seconds value. - * This parameter can be a value from 0 to 0x00007FFF. - * @param RTC_AlarmSubSecondMask: specifies the Sub seconds Mask. - * This parameter can be any combination of the following values: - * @arg RTC_AlarmSubSecondMask_All : All Alarm SS fields are masked. - * There is no comparison on sub seconds for Alarm. - * @arg RTC_AlarmSubSecondMask_SS14_1 : SS[14:1] are don't care in Alarm comparison. - * Only SS[0] is compared - * @arg RTC_AlarmSubSecondMask_SS14_2 : SS[14:2] are don't care in Alarm comparison. - * Only SS[1:0] are compared - * @arg RTC_AlarmSubSecondMask_SS14_3 : SS[14:3] are don't care in Alarm comparison. - * Only SS[2:0] are compared - * @arg RTC_AlarmSubSecondMask_SS14_4 : SS[14:4] are don't care in Alarm comparison. - * Only SS[3:0] are compared - * @arg RTC_AlarmSubSecondMask_SS14_5 : SS[14:5] are don't care in Alarm comparison. - * Only SS[4:0] are compared - * @arg RTC_AlarmSubSecondMask_SS14_6 : SS[14:6] are don't care in Alarm comparison. - * Only SS[5:0] are compared - * @arg RTC_AlarmSubSecondMask_SS14_7 : SS[14:7] are don't care in Alarm comparison. - * Only SS[6:0] are compared - * @arg RTC_AlarmSubSecondMask_SS14_8 : SS[14:8] are don't care in Alarm comparison. - * Only SS[7:0] are compared - * @arg RTC_AlarmSubSecondMask_SS14_9 : SS[14:9] are don't care in Alarm comparison. - * Only SS[8:0] are compared - * @arg RTC_AlarmSubSecondMask_SS14_10: SS[14:10] are don't care in Alarm comparison. - * Only SS[9:0] are compared - * @arg RTC_AlarmSubSecondMask_SS14_11: SS[14:11] are don't care in Alarm comparison. - * Only SS[10:0] are compared - * @arg RTC_AlarmSubSecondMask_SS14_12: SS[14:12] are don't care in Alarm comparison. - * Only SS[11:0] are compared - * @arg RTC_AlarmSubSecondMask_SS14_13: SS[14:13] are don't care in Alarm comparison. - * Only SS[12:0] are compared - * @arg RTC_AlarmSubSecondMask_SS14 : SS[14] is don't care in Alarm comparison. - * Only SS[13:0] are compared - * @arg RTC_AlarmSubSecondMask_None : SS[14:0] are compared and must match - * to activate alarm - * @retval None - */ -void RTC_AlarmSubSecondConfig(uint32_t RTC_Alarm, uint32_t RTC_AlarmSubSecondValue, uint32_t RTC_AlarmSubSecondMask) -{ - uint32_t tmpreg = 0; - - /* Check the parameters */ - assert_param(IS_RTC_ALARM(RTC_Alarm)); - assert_param(IS_RTC_ALARM_SUB_SECOND_VALUE(RTC_AlarmSubSecondValue)); - assert_param(IS_RTC_ALARM_SUB_SECOND_MASK(RTC_AlarmSubSecondMask)); - - /* Disable the write protection for RTC registers */ - RTC->WPR = 0xCA; - RTC->WPR = 0x53; - - /* Configure the Alarm A or Alarm B Sub Second registers */ - tmpreg = (uint32_t) (uint32_t)(RTC_AlarmSubSecondValue) | (uint32_t)(RTC_AlarmSubSecondMask); - - if (RTC_Alarm == RTC_Alarm_A) - { - /* Configure the Alarm A Sub Second register */ - RTC->ALRMASSR = tmpreg; - } - else - { - /* Configure the Alarm B Sub Second register */ - RTC->ALRMBSSR = tmpreg; - } - - /* Enable the write protection for RTC registers */ - RTC->WPR = 0xFF; - -} - -/** - * @brief Gets the RTC Alarm Sub seconds value. - * @param RTC_Alarm: specifies the alarm to be read. - * This parameter can be one of the following values: - * @arg RTC_Alarm_A: to select Alarm A - * @arg RTC_Alarm_B: to select Alarm B - * @param None - * @retval RTC Alarm Sub seconds value. - */ -uint32_t RTC_GetAlarmSubSecond(uint32_t RTC_Alarm) -{ - uint32_t tmpreg = 0; - - /* Get the RTC_ALRMxR register */ - if (RTC_Alarm == RTC_Alarm_A) - { - tmpreg = (uint32_t)((RTC->ALRMASSR) & RTC_ALRMASSR_SS); - } - else - { - tmpreg = (uint32_t)((RTC->ALRMBSSR) & RTC_ALRMBSSR_SS); - } - - return (tmpreg); -} - -/** - * @} - */ - -/** @defgroup RTC_Group4 WakeUp Timer configuration functions - * @brief WakeUp Timer configuration functions - * -@verbatim - =============================================================================== - ##### WakeUp Timer configuration functions ##### - =============================================================================== - - [..] This section provide functions allowing to program and read the RTC WakeUp. - -@endverbatim - * @{ - */ - -/** - * @brief Configures the RTC Wakeup clock source. - * @note The WakeUp Clock source can only be changed when the RTC WakeUp - * is disabled (Use the RTC_WakeUpCmd(DISABLE)). - * @param RTC_WakeUpClock: Wakeup Clock source. - * This parameter can be one of the following values: - * @arg RTC_WakeUpClock_RTCCLK_Div16: RTC Wakeup Counter Clock = RTCCLK/16 - * @arg RTC_WakeUpClock_RTCCLK_Div8: RTC Wakeup Counter Clock = RTCCLK/8 - * @arg RTC_WakeUpClock_RTCCLK_Div4: RTC Wakeup Counter Clock = RTCCLK/4 - * @arg RTC_WakeUpClock_RTCCLK_Div2: RTC Wakeup Counter Clock = RTCCLK/2 - * @arg RTC_WakeUpClock_CK_SPRE_16bits: RTC Wakeup Counter Clock = CK_SPRE - * @arg RTC_WakeUpClock_CK_SPRE_17bits: RTC Wakeup Counter Clock = CK_SPRE - * @retval None - */ -void RTC_WakeUpClockConfig(uint32_t RTC_WakeUpClock) -{ - /* Check the parameters */ - assert_param(IS_RTC_WAKEUP_CLOCK(RTC_WakeUpClock)); - - /* Disable the write protection for RTC registers */ - RTC->WPR = 0xCA; - RTC->WPR = 0x53; - - /* Clear the Wakeup Timer clock source bits in CR register */ - RTC->CR &= (uint32_t)~RTC_CR_WUCKSEL; - - /* Configure the clock source */ - RTC->CR |= (uint32_t)RTC_WakeUpClock; - - /* Enable the write protection for RTC registers */ - RTC->WPR = 0xFF; -} - -/** - * @brief Configures the RTC Wakeup counter. - * @note The RTC WakeUp counter can only be written when the RTC WakeUp - * is disabled (Use the RTC_WakeUpCmd(DISABLE)). - * @param RTC_WakeUpCounter: specifies the WakeUp counter. - * This parameter can be a value from 0x0000 to 0xFFFF. - * @retval None - */ -void RTC_SetWakeUpCounter(uint32_t RTC_WakeUpCounter) -{ - /* Check the parameters */ - assert_param(IS_RTC_WAKEUP_COUNTER(RTC_WakeUpCounter)); - - /* Disable the write protection for RTC registers */ - RTC->WPR = 0xCA; - RTC->WPR = 0x53; - - /* Configure the Wakeup Timer counter */ - RTC->WUTR = (uint32_t)RTC_WakeUpCounter; - - /* Enable the write protection for RTC registers */ - RTC->WPR = 0xFF; -} - -/** - * @brief Returns the RTC WakeUp timer counter value. - * @param None - * @retval The RTC WakeUp Counter value. - */ -uint32_t RTC_GetWakeUpCounter(void) -{ - /* Get the counter value */ - return ((uint32_t)(RTC->WUTR & RTC_WUTR_WUT)); -} - -/** - * @brief Enables or Disables the RTC WakeUp timer. - * @param NewState: new state of the WakeUp timer. - * This parameter can be: ENABLE or DISABLE. - * @retval None - */ -ErrorStatus RTC_WakeUpCmd(FunctionalState NewState) -{ - __IO uint32_t wutcounter = 0x00; - uint32_t wutwfstatus = 0x00; - ErrorStatus status = ERROR; - - /* Check the parameters */ - assert_param(IS_FUNCTIONAL_STATE(NewState)); - - /* Disable the write protection for RTC registers */ - RTC->WPR = 0xCA; - RTC->WPR = 0x53; - - if (NewState != DISABLE) - { - /* Enable the Wakeup Timer */ - RTC->CR |= (uint32_t)RTC_CR_WUTE; - status = SUCCESS; - } - else - { - /* Disable the Wakeup Timer */ - RTC->CR &= (uint32_t)~RTC_CR_WUTE; - /* Wait till RTC WUTWF flag is set and if Time out is reached exit */ - do - { - wutwfstatus = RTC->ISR & RTC_ISR_WUTWF; - wutcounter++; - } while((wutcounter != INITMODE_TIMEOUT) && (wutwfstatus == 0x00)); - - if ((RTC->ISR & RTC_ISR_WUTWF) == RESET) - { - status = ERROR; - } - else - { - status = SUCCESS; - } - } - - /* Enable the write protection for RTC registers */ - RTC->WPR = 0xFF; - - return status; -} - -/** - * @} - */ - -/** @defgroup RTC_Group5 Daylight Saving configuration functions - * @brief Daylight Saving configuration functions - * -@verbatim - =============================================================================== - ##### Daylight Saving configuration functions ##### - =============================================================================== - - [..] This section provide functions allowing to configure the RTC DayLight Saving. - -@endverbatim - * @{ - */ - -/** - * @brief Adds or substract one hour from the current time. - * @param RTC_DayLightSaveOperation: the value of hour adjustment. - * This parameter can be one of the following values: - * @arg RTC_DayLightSaving_SUB1H: Substract one hour (winter time) - * @arg RTC_DayLightSaving_ADD1H: Add one hour (summer time) - * @param RTC_StoreOperation: Specifies the value to be written in the BCK bit - * in CR register to store the operation. - * This parameter can be one of the following values: - * @arg RTC_StoreOperation_Reset: BCK Bit Reset - * @arg RTC_StoreOperation_Set: BCK Bit Set - * @retval None - */ -void RTC_DayLightSavingConfig(uint32_t RTC_DayLightSaving, uint32_t RTC_StoreOperation) -{ - /* Check the parameters */ - assert_param(IS_RTC_DAYLIGHT_SAVING(RTC_DayLightSaving)); - assert_param(IS_RTC_STORE_OPERATION(RTC_StoreOperation)); - - /* Disable the write protection for RTC registers */ - RTC->WPR = 0xCA; - RTC->WPR = 0x53; - - /* Clear the bits to be configured */ - RTC->CR &= (uint32_t)~(RTC_CR_BCK); - - /* Configure the RTC_CR register */ - RTC->CR |= (uint32_t)(RTC_DayLightSaving | RTC_StoreOperation); - - /* Enable the write protection for RTC registers */ - RTC->WPR = 0xFF; -} - -/** - * @brief Returns the RTC Day Light Saving stored operation. - * @param None - * @retval RTC Day Light Saving stored operation. - * - RTC_StoreOperation_Reset - * - RTC_StoreOperation_Set - */ -uint32_t RTC_GetStoreOperation(void) -{ - return (RTC->CR & RTC_CR_BCK); -} - -/** - * @} - */ - -/** @defgroup RTC_Group6 Output pin Configuration function - * @brief Output pin Configuration function - * -@verbatim - =============================================================================== - ##### Output pin Configuration function ##### - =============================================================================== - - [..] This section provide functions allowing to configure the RTC Output source. - -@endverbatim - * @{ - */ - -/** - * @brief Configures the RTC output source (AFO_ALARM). - * @param RTC_Output: Specifies which signal will be routed to the RTC output. - * This parameter can be one of the following values: - * @arg RTC_Output_Disable: No output selected - * @arg RTC_Output_AlarmA: signal of AlarmA mapped to output - * @arg RTC_Output_AlarmB: signal of AlarmB mapped to output - * @arg RTC_Output_WakeUp: signal of WakeUp mapped to output - * @param RTC_OutputPolarity: Specifies the polarity of the output signal. - * This parameter can be one of the following: - * @arg RTC_OutputPolarity_High: The output pin is high when the - * ALRAF/ALRBF/WUTF is high (depending on OSEL) - * @arg RTC_OutputPolarity_Low: The output pin is low when the - * ALRAF/ALRBF/WUTF is high (depending on OSEL) - * @retval None - */ -void RTC_OutputConfig(uint32_t RTC_Output, uint32_t RTC_OutputPolarity) -{ - /* Check the parameters */ - assert_param(IS_RTC_OUTPUT(RTC_Output)); - assert_param(IS_RTC_OUTPUT_POL(RTC_OutputPolarity)); - - /* Disable the write protection for RTC registers */ - RTC->WPR = 0xCA; - RTC->WPR = 0x53; - - /* Clear the bits to be configured */ - RTC->CR &= (uint32_t)~(RTC_CR_OSEL | RTC_CR_POL); - - /* Configure the output selection and polarity */ - RTC->CR |= (uint32_t)(RTC_Output | RTC_OutputPolarity); - - /* Enable the write protection for RTC registers */ - RTC->WPR = 0xFF; -} - -/** - * @} - */ - -/** @defgroup RTC_Group7 Digital Calibration configuration functions - * @brief Coarse Calibration configuration functions - * -@verbatim - =============================================================================== - ##### Digital Calibration configuration functions ##### - =============================================================================== - -@endverbatim - * @{ - */ - -/** - * @brief Configures the Coarse calibration parameters. - * @param RTC_CalibSign: specifies the sign of the coarse calibration value. - * This parameter can be one of the following values: - * @arg RTC_CalibSign_Positive: The value sign is positive - * @arg RTC_CalibSign_Negative: The value sign is negative - * @param Value: value of coarse calibration expressed in ppm (coded on 5 bits). - * - * @note This Calibration value should be between 0 and 63 when using negative - * sign with a 2-ppm step. - * - * @note This Calibration value should be between 0 and 126 when using positive - * sign with a 4-ppm step. - * - * @retval An ErrorStatus enumeration value: - * - SUCCESS: RTC Coarse calibration are initialized - * - ERROR: RTC Coarse calibration are not initialized - */ -ErrorStatus RTC_CoarseCalibConfig(uint32_t RTC_CalibSign, uint32_t Value) -{ - ErrorStatus status = ERROR; - - /* Check the parameters */ - assert_param(IS_RTC_CALIB_SIGN(RTC_CalibSign)); - assert_param(IS_RTC_CALIB_VALUE(Value)); - - /* Disable the write protection for RTC registers */ - RTC->WPR = 0xCA; - RTC->WPR = 0x53; - - /* Set Initialization mode */ - if (RTC_EnterInitMode() == ERROR) - { - status = ERROR; - } - else - { - /* Set the coarse calibration value */ - RTC->CALIBR = (uint32_t)(RTC_CalibSign | Value); - /* Exit Initialization mode */ - RTC_ExitInitMode(); - - status = SUCCESS; - } - - /* Enable the write protection for RTC registers */ - RTC->WPR = 0xFF; - - return status; -} - -/** - * @brief Enables or disables the Coarse calibration process. - * @param NewState: new state of the Coarse calibration. - * This parameter can be: ENABLE or DISABLE. - * @retval An ErrorStatus enumeration value: - * - SUCCESS: RTC Coarse calibration are enabled/disabled - * - ERROR: RTC Coarse calibration are not enabled/disabled - */ -ErrorStatus RTC_CoarseCalibCmd(FunctionalState NewState) -{ - ErrorStatus status = ERROR; - - /* Check the parameters */ - assert_param(IS_FUNCTIONAL_STATE(NewState)); - - /* Disable the write protection for RTC registers */ - RTC->WPR = 0xCA; - RTC->WPR = 0x53; - - /* Set Initialization mode */ - if (RTC_EnterInitMode() == ERROR) - { - status = ERROR; - } - else - { - if (NewState != DISABLE) - { - /* Enable the Coarse Calibration */ - RTC->CR |= (uint32_t)RTC_CR_DCE; - } - else - { - /* Disable the Coarse Calibration */ - RTC->CR &= (uint32_t)~RTC_CR_DCE; - } - /* Exit Initialization mode */ - RTC_ExitInitMode(); - - status = SUCCESS; - } - - /* Enable the write protection for RTC registers */ - RTC->WPR = 0xFF; - - return status; -} - -/** - * @brief Enables or disables the RTC clock to be output through the relative pin. - * @param NewState: new state of the digital calibration Output. - * This parameter can be: ENABLE or DISABLE. - * @retval None - */ -void RTC_CalibOutputCmd(FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_FUNCTIONAL_STATE(NewState)); - - /* Disable the write protection for RTC registers */ - RTC->WPR = 0xCA; - RTC->WPR = 0x53; - - if (NewState != DISABLE) - { - /* Enable the RTC clock output */ - RTC->CR |= (uint32_t)RTC_CR_COE; - } - else - { - /* Disable the RTC clock output */ - RTC->CR &= (uint32_t)~RTC_CR_COE; - } - - /* Enable the write protection for RTC registers */ - RTC->WPR = 0xFF; -} - -/** - * @brief Configure the Calibration Pinout (RTC_CALIB) Selection (1Hz or 512Hz). - * @param RTC_CalibOutput : Select the Calibration output Selection . - * This parameter can be one of the following values: - * @arg RTC_CalibOutput_512Hz: A signal has a regular waveform at 512Hz. - * @arg RTC_CalibOutput_1Hz : A signal has a regular waveform at 1Hz. - * @retval None -*/ -void RTC_CalibOutputConfig(uint32_t RTC_CalibOutput) -{ - /* Check the parameters */ - assert_param(IS_RTC_CALIB_OUTPUT(RTC_CalibOutput)); - - /* Disable the write protection for RTC registers */ - RTC->WPR = 0xCA; - RTC->WPR = 0x53; - - /*clear flags before configuration */ - RTC->CR &= (uint32_t)~(RTC_CR_COSEL); - - /* Configure the RTC_CR register */ - RTC->CR |= (uint32_t)RTC_CalibOutput; - - /* Enable the write protection for RTC registers */ - RTC->WPR = 0xFF; -} - -/** - * @brief Configures the Smooth Calibration Settings. - * @param RTC_SmoothCalibPeriod : Select the Smooth Calibration Period. - * This parameter can be can be one of the following values: - * @arg RTC_SmoothCalibPeriod_32sec : The smooth calibration period is 32s. - * @arg RTC_SmoothCalibPeriod_16sec : The smooth calibration period is 16s. - * @arg RTC_SmoothCalibPeriod_8sec : The smooth calibartion period is 8s. - * @param RTC_SmoothCalibPlusPulses : Select to Set or reset the CALP bit. - * This parameter can be one of the following values: - * @arg RTC_SmoothCalibPlusPulses_Set : Add one RTCCLK puls every 2**11 pulses. - * @arg RTC_SmoothCalibPlusPulses_Reset: No RTCCLK pulses are added. - * @param RTC_SmouthCalibMinusPulsesValue: Select the value of CALM[8:0] bits. - * This parameter can be one any value from 0 to 0x000001FF. - * @retval An ErrorStatus enumeration value: - * - SUCCESS: RTC Calib registers are configured - * - ERROR: RTC Calib registers are not configured -*/ -ErrorStatus RTC_SmoothCalibConfig(uint32_t RTC_SmoothCalibPeriod, - uint32_t RTC_SmoothCalibPlusPulses, - uint32_t RTC_SmouthCalibMinusPulsesValue) -{ - ErrorStatus status = ERROR; - uint32_t recalpfcount = 0; - - /* Check the parameters */ - assert_param(IS_RTC_SMOOTH_CALIB_PERIOD(RTC_SmoothCalibPeriod)); - assert_param(IS_RTC_SMOOTH_CALIB_PLUS(RTC_SmoothCalibPlusPulses)); - assert_param(IS_RTC_SMOOTH_CALIB_MINUS(RTC_SmouthCalibMinusPulsesValue)); - - /* Disable the write protection for RTC registers */ - RTC->WPR = 0xCA; - RTC->WPR = 0x53; - - /* check if a calibration is pending*/ - if ((RTC->ISR & RTC_ISR_RECALPF) != RESET) - { - /* wait until the Calibration is completed*/ - while (((RTC->ISR & RTC_ISR_RECALPF) != RESET) && (recalpfcount != RECALPF_TIMEOUT)) - { - recalpfcount++; - } - } - - /* check if the calibration pending is completed or if there is no calibration operation at all*/ - if ((RTC->ISR & RTC_ISR_RECALPF) == RESET) - { - /* Configure the Smooth calibration settings */ - RTC->CALR = (uint32_t)((uint32_t)RTC_SmoothCalibPeriod | (uint32_t)RTC_SmoothCalibPlusPulses | (uint32_t)RTC_SmouthCalibMinusPulsesValue); - - status = SUCCESS; - } - else - { - status = ERROR; - } - - /* Enable the write protection for RTC registers */ - RTC->WPR = 0xFF; - - return (ErrorStatus)(status); -} - -/** - * @} - */ - - -/** @defgroup RTC_Group8 TimeStamp configuration functions - * @brief TimeStamp configuration functions - * -@verbatim - =============================================================================== - ##### TimeStamp configuration functions ##### - =============================================================================== - -@endverbatim - * @{ - */ - -/** - * @brief Enables or Disables the RTC TimeStamp functionality with the - * specified time stamp pin stimulating edge. - * @param RTC_TimeStampEdge: Specifies the pin edge on which the TimeStamp is - * activated. - * This parameter can be one of the following: - * @arg RTC_TimeStampEdge_Rising: the Time stamp event occurs on the rising - * edge of the related pin. - * @arg RTC_TimeStampEdge_Falling: the Time stamp event occurs on the - * falling edge of the related pin. - * @param NewState: new state of the TimeStamp. - * This parameter can be: ENABLE or DISABLE. - * @retval None - */ -void RTC_TimeStampCmd(uint32_t RTC_TimeStampEdge, FunctionalState NewState) -{ - uint32_t tmpreg = 0; - - /* Check the parameters */ - assert_param(IS_RTC_TIMESTAMP_EDGE(RTC_TimeStampEdge)); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - - /* Get the RTC_CR register and clear the bits to be configured */ - tmpreg = (uint32_t)(RTC->CR & (uint32_t)~(RTC_CR_TSEDGE | RTC_CR_TSE)); - - /* Get the new configuration */ - if (NewState != DISABLE) - { - tmpreg |= (uint32_t)(RTC_TimeStampEdge | RTC_CR_TSE); - } - else - { - tmpreg |= (uint32_t)(RTC_TimeStampEdge); - } - - /* Disable the write protection for RTC registers */ - RTC->WPR = 0xCA; - RTC->WPR = 0x53; - - /* Configure the Time Stamp TSEDGE and Enable bits */ - RTC->CR = (uint32_t)tmpreg; - - /* Enable the write protection for RTC registers */ - RTC->WPR = 0xFF; -} - -/** - * @brief Get the RTC TimeStamp value and masks. - * @param RTC_Format: specifies the format of the output parameters. - * This parameter can be one of the following values: - * @arg RTC_Format_BIN: Binary data format - * @arg RTC_Format_BCD: BCD data format - * @param RTC_StampTimeStruct: pointer to a RTC_TimeTypeDef structure that will - * contains the TimeStamp time values. - * @param RTC_StampDateStruct: pointer to a RTC_DateTypeDef structure that will - * contains the TimeStamp date values. - * @retval None - */ -void RTC_GetTimeStamp(uint32_t RTC_Format, RTC_TimeTypeDef* RTC_StampTimeStruct, - RTC_DateTypeDef* RTC_StampDateStruct) -{ - uint32_t tmptime = 0, tmpdate = 0; - - /* Check the parameters */ - assert_param(IS_RTC_FORMAT(RTC_Format)); - - /* Get the TimeStamp time and date registers values */ - tmptime = (uint32_t)(RTC->TSTR & RTC_TR_RESERVED_MASK); - tmpdate = (uint32_t)(RTC->TSDR & RTC_DR_RESERVED_MASK); - - /* Fill the Time structure fields with the read parameters */ - RTC_StampTimeStruct->RTC_Hours = (uint8_t)((tmptime & (RTC_TR_HT | RTC_TR_HU)) >> 16); - RTC_StampTimeStruct->RTC_Minutes = (uint8_t)((tmptime & (RTC_TR_MNT | RTC_TR_MNU)) >> 8); - RTC_StampTimeStruct->RTC_Seconds = (uint8_t)(tmptime & (RTC_TR_ST | RTC_TR_SU)); - RTC_StampTimeStruct->RTC_H12 = (uint8_t)((tmptime & (RTC_TR_PM)) >> 16); - - /* Fill the Date structure fields with the read parameters */ - RTC_StampDateStruct->RTC_Year = 0; - RTC_StampDateStruct->RTC_Month = (uint8_t)((tmpdate & (RTC_DR_MT | RTC_DR_MU)) >> 8); - RTC_StampDateStruct->RTC_Date = (uint8_t)(tmpdate & (RTC_DR_DT | RTC_DR_DU)); - RTC_StampDateStruct->RTC_WeekDay = (uint8_t)((tmpdate & (RTC_DR_WDU)) >> 13); - - /* Check the input parameters format */ - if (RTC_Format == RTC_Format_BIN) - { - /* Convert the Time structure parameters to Binary format */ - RTC_StampTimeStruct->RTC_Hours = (uint8_t)RTC_Bcd2ToByte(RTC_StampTimeStruct->RTC_Hours); - RTC_StampTimeStruct->RTC_Minutes = (uint8_t)RTC_Bcd2ToByte(RTC_StampTimeStruct->RTC_Minutes); - RTC_StampTimeStruct->RTC_Seconds = (uint8_t)RTC_Bcd2ToByte(RTC_StampTimeStruct->RTC_Seconds); - - /* Convert the Date structure parameters to Binary format */ - RTC_StampDateStruct->RTC_Month = (uint8_t)RTC_Bcd2ToByte(RTC_StampDateStruct->RTC_Month); - RTC_StampDateStruct->RTC_Date = (uint8_t)RTC_Bcd2ToByte(RTC_StampDateStruct->RTC_Date); - RTC_StampDateStruct->RTC_WeekDay = (uint8_t)RTC_Bcd2ToByte(RTC_StampDateStruct->RTC_WeekDay); - } -} - -/** - * @brief Get the RTC timestamp Sub seconds value. - * @param None - * @retval RTC current timestamp Sub seconds value. - */ -uint32_t RTC_GetTimeStampSubSecond(void) -{ - /* Get timestamp sub seconds values from the correspondent registers */ - return (uint32_t)(RTC->TSSSR); -} - -/** - * @} - */ - -/** @defgroup RTC_Group9 Tampers configuration functions - * @brief Tampers configuration functions - * -@verbatim - =============================================================================== - ##### Tampers configuration functions ##### - =============================================================================== - -@endverbatim - * @{ - */ - -/** - * @brief Configures the select Tamper pin edge. - * @param RTC_Tamper: Selected tamper pin. - * This parameter can be RTC_Tamper_1. - * @param RTC_TamperTrigger: Specifies the trigger on the tamper pin that - * stimulates tamper event. - * This parameter can be one of the following values: - * @arg RTC_TamperTrigger_RisingEdge: Rising Edge of the tamper pin causes tamper event. - * @arg RTC_TamperTrigger_FallingEdge: Falling Edge of the tamper pin causes tamper event. - * @arg RTC_TamperTrigger_LowLevel: Low Level of the tamper pin causes tamper event. - * @arg RTC_TamperTrigger_HighLevel: High Level of the tamper pin causes tamper event. - * @retval None - */ -void RTC_TamperTriggerConfig(uint32_t RTC_Tamper, uint32_t RTC_TamperTrigger) -{ - /* Check the parameters */ - assert_param(IS_RTC_TAMPER(RTC_Tamper)); - assert_param(IS_RTC_TAMPER_TRIGGER(RTC_TamperTrigger)); - - if (RTC_TamperTrigger == RTC_TamperTrigger_RisingEdge) - { - /* Configure the RTC_TAFCR register */ - RTC->TAFCR &= (uint32_t)((uint32_t)~(RTC_Tamper << 1)); - } - else - { - /* Configure the RTC_TAFCR register */ - RTC->TAFCR |= (uint32_t)(RTC_Tamper << 1); - } -} - -/** - * @brief Enables or Disables the Tamper detection. - * @param RTC_Tamper: Selected tamper pin. - * This parameter can be RTC_Tamper_1. - * @param NewState: new state of the tamper pin. - * This parameter can be: ENABLE or DISABLE. - * @retval None - */ -void RTC_TamperCmd(uint32_t RTC_Tamper, FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_RTC_TAMPER(RTC_Tamper)); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - - if (NewState != DISABLE) - { - /* Enable the selected Tamper pin */ - RTC->TAFCR |= (uint32_t)RTC_Tamper; - } - else - { - /* Disable the selected Tamper pin */ - RTC->TAFCR &= (uint32_t)~RTC_Tamper; - } -} - -/** - * @brief Configures the Tampers Filter. - * @param RTC_TamperFilter: Specifies the tampers filter. - * This parameter can be one of the following values: - * @arg RTC_TamperFilter_Disable: Tamper filter is disabled. - * @arg RTC_TamperFilter_2Sample: Tamper is activated after 2 consecutive - * samples at the active level - * @arg RTC_TamperFilter_4Sample: Tamper is activated after 4 consecutive - * samples at the active level - * @arg RTC_TamperFilter_8Sample: Tamper is activated after 8 consecutive - * samples at the active level - * @retval None - */ -void RTC_TamperFilterConfig(uint32_t RTC_TamperFilter) -{ - /* Check the parameters */ - assert_param(IS_RTC_TAMPER_FILTER(RTC_TamperFilter)); - - /* Clear TAMPFLT[1:0] bits in the RTC_TAFCR register */ - RTC->TAFCR &= (uint32_t)~(RTC_TAFCR_TAMPFLT); - - /* Configure the RTC_TAFCR register */ - RTC->TAFCR |= (uint32_t)RTC_TamperFilter; -} - -/** - * @brief Configures the Tampers Sampling Frequency. - * @param RTC_TamperSamplingFreq: Specifies the tampers Sampling Frequency. - * This parameter can be one of the following values: - * @arg RTC_TamperSamplingFreq_RTCCLK_Div32768: Each of the tamper inputs are sampled - * with a frequency = RTCCLK / 32768 - * @arg RTC_TamperSamplingFreq_RTCCLK_Div16384: Each of the tamper inputs are sampled - * with a frequency = RTCCLK / 16384 - * @arg RTC_TamperSamplingFreq_RTCCLK_Div8192: Each of the tamper inputs are sampled - * with a frequency = RTCCLK / 8192 - * @arg RTC_TamperSamplingFreq_RTCCLK_Div4096: Each of the tamper inputs are sampled - * with a frequency = RTCCLK / 4096 - * @arg RTC_TamperSamplingFreq_RTCCLK_Div2048: Each of the tamper inputs are sampled - * with a frequency = RTCCLK / 2048 - * @arg RTC_TamperSamplingFreq_RTCCLK_Div1024: Each of the tamper inputs are sampled - * with a frequency = RTCCLK / 1024 - * @arg RTC_TamperSamplingFreq_RTCCLK_Div512: Each of the tamper inputs are sampled - * with a frequency = RTCCLK / 512 - * @arg RTC_TamperSamplingFreq_RTCCLK_Div256: Each of the tamper inputs are sampled - * with a frequency = RTCCLK / 256 - * @retval None - */ -void RTC_TamperSamplingFreqConfig(uint32_t RTC_TamperSamplingFreq) -{ - /* Check the parameters */ - assert_param(IS_RTC_TAMPER_SAMPLING_FREQ(RTC_TamperSamplingFreq)); - - /* Clear TAMPFREQ[2:0] bits in the RTC_TAFCR register */ - RTC->TAFCR &= (uint32_t)~(RTC_TAFCR_TAMPFREQ); - - /* Configure the RTC_TAFCR register */ - RTC->TAFCR |= (uint32_t)RTC_TamperSamplingFreq; -} - -/** - * @brief Configures the Tampers Pins input Precharge Duration. - * @param RTC_TamperPrechargeDuration: Specifies the Tampers Pins input - * Precharge Duration. - * This parameter can be one of the following values: - * @arg RTC_TamperPrechargeDuration_1RTCCLK: Tamper pins are precharged before sampling during 1 RTCCLK cycle - * @arg RTC_TamperPrechargeDuration_2RTCCLK: Tamper pins are precharged before sampling during 2 RTCCLK cycle - * @arg RTC_TamperPrechargeDuration_4RTCCLK: Tamper pins are precharged before sampling during 4 RTCCLK cycle - * @arg RTC_TamperPrechargeDuration_8RTCCLK: Tamper pins are precharged before sampling during 8 RTCCLK cycle - * @retval None - */ -void RTC_TamperPinsPrechargeDuration(uint32_t RTC_TamperPrechargeDuration) -{ - /* Check the parameters */ - assert_param(IS_RTC_TAMPER_PRECHARGE_DURATION(RTC_TamperPrechargeDuration)); - - /* Clear TAMPPRCH[1:0] bits in the RTC_TAFCR register */ - RTC->TAFCR &= (uint32_t)~(RTC_TAFCR_TAMPPRCH); - - /* Configure the RTC_TAFCR register */ - RTC->TAFCR |= (uint32_t)RTC_TamperPrechargeDuration; -} - -/** - * @brief Enables or Disables the TimeStamp on Tamper Detection Event. - * @note The timestamp is valid even the TSE bit in tamper control register - * is reset. - * @param NewState: new state of the timestamp on tamper event. - * This parameter can be: ENABLE or DISABLE. - * @retval None - */ -void RTC_TimeStampOnTamperDetectionCmd(FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_FUNCTIONAL_STATE(NewState)); - - if (NewState != DISABLE) - { - /* Save timestamp on tamper detection event */ - RTC->TAFCR |= (uint32_t)RTC_TAFCR_TAMPTS; - } - else - { - /* Tamper detection does not cause a timestamp to be saved */ - RTC->TAFCR &= (uint32_t)~RTC_TAFCR_TAMPTS; - } -} - -/** - * @brief Enables or Disables the Precharge of Tamper pin. - * @param NewState: new state of tamper pull up. - * This parameter can be: ENABLE or DISABLE. - * @retval None - */ -void RTC_TamperPullUpCmd(FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_FUNCTIONAL_STATE(NewState)); - - if (NewState != DISABLE) - { - /* Enable precharge of the selected Tamper pin */ - RTC->TAFCR &= (uint32_t)~RTC_TAFCR_TAMPPUDIS; - } - else - { - /* Disable precharge of the selected Tamper pin */ - RTC->TAFCR |= (uint32_t)RTC_TAFCR_TAMPPUDIS; - } -} - -/** - * @} - */ - -/** @defgroup RTC_Group10 Backup Data Registers configuration functions - * @brief Backup Data Registers configuration functions - * -@verbatim - =============================================================================== - ##### Backup Data Registers configuration functions ##### - =============================================================================== - -@endverbatim - * @{ - */ - -/** - * @brief Writes a data in a specified RTC Backup data register. - * @param RTC_BKP_DR: RTC Backup data Register number. - * This parameter can be: RTC_BKP_DRx where x can be from 0 to 19 to - * specify the register. - * @param Data: Data to be written in the specified RTC Backup data register. - * @retval None - */ -void RTC_WriteBackupRegister(uint32_t RTC_BKP_DR, uint32_t Data) -{ - __IO uint32_t tmp = 0; - - /* Check the parameters */ - assert_param(IS_RTC_BKP(RTC_BKP_DR)); - - tmp = RTC_BASE + 0x50; - tmp += (RTC_BKP_DR * 4); - - /* Write the specified register */ - *(__IO uint32_t *)tmp = (uint32_t)Data; -} - -/** - * @brief Reads data from the specified RTC Backup data Register. - * @param RTC_BKP_DR: RTC Backup data Register number. - * This parameter can be: RTC_BKP_DRx where x can be from 0 to 19 to - * specify the register. - * @retval None - */ -uint32_t RTC_ReadBackupRegister(uint32_t RTC_BKP_DR) -{ - __IO uint32_t tmp = 0; - - /* Check the parameters */ - assert_param(IS_RTC_BKP(RTC_BKP_DR)); - - tmp = RTC_BASE + 0x50; - tmp += (RTC_BKP_DR * 4); - - /* Read the specified register */ - return (*(__IO uint32_t *)tmp); -} - -/** - * @} - */ - -/** @defgroup RTC_Group11 RTC Tamper and TimeStamp Pins Selection and Output Type Config configuration functions - * @brief RTC Tamper and TimeStamp Pins Selection and Output Type Config - * configuration functions - * -@verbatim - ================================================================================================== - ##### RTC Tamper and TimeStamp Pins Selection and Output Type Config configuration functions ##### - ================================================================================================== - -@endverbatim - * @{ - */ - -/** - * @brief Selects the RTC Tamper Pin. - * @param RTC_TamperPin: specifies the RTC Tamper Pin. - * This parameter can be one of the following values: - * @arg RTC_TamperPin_PC13: PC13 is selected as RTC Tamper Pin. - * @arg RTC_TamperPin_PI8: PI8 is selected as RTC Tamper Pin. - * @retval None - */ -void RTC_TamperPinSelection(uint32_t RTC_TamperPin) -{ - /* Check the parameters */ - assert_param(IS_RTC_TAMPER_PIN(RTC_TamperPin)); - - RTC->TAFCR &= (uint32_t)~(RTC_TAFCR_TAMPINSEL); - RTC->TAFCR |= (uint32_t)(RTC_TamperPin); -} - -/** - * @brief Selects the RTC TimeStamp Pin. - * @param RTC_TimeStampPin: specifies the RTC TimeStamp Pin. - * This parameter can be one of the following values: - * @arg RTC_TimeStampPin_PC13: PC13 is selected as RTC TimeStamp Pin. - * @arg RTC_TimeStampPin_PI8: PI8 is selected as RTC TimeStamp Pin. - * @retval None - */ -void RTC_TimeStampPinSelection(uint32_t RTC_TimeStampPin) -{ - /* Check the parameters */ - assert_param(IS_RTC_TIMESTAMP_PIN(RTC_TimeStampPin)); - - RTC->TAFCR &= (uint32_t)~(RTC_TAFCR_TSINSEL); - RTC->TAFCR |= (uint32_t)(RTC_TimeStampPin); -} - -/** - * @brief Configures the RTC Output Pin mode. - * @param RTC_OutputType: specifies the RTC Output (PC13) pin mode. - * This parameter can be one of the following values: - * @arg RTC_OutputType_OpenDrain: RTC Output (PC13) is configured in - * Open Drain mode. - * @arg RTC_OutputType_PushPull: RTC Output (PC13) is configured in - * Push Pull mode. - * @retval None - */ -void RTC_OutputTypeConfig(uint32_t RTC_OutputType) -{ - /* Check the parameters */ - assert_param(IS_RTC_OUTPUT_TYPE(RTC_OutputType)); - - RTC->TAFCR &= (uint32_t)~(RTC_TAFCR_ALARMOUTTYPE); - RTC->TAFCR |= (uint32_t)(RTC_OutputType); -} - -/** - * @} - */ - -/** @defgroup RTC_Group12 Shift control synchronisation functions - * @brief Shift control synchronisation functions - * -@verbatim - =============================================================================== - ##### Shift control synchronisation functions ##### - =============================================================================== - -@endverbatim - * @{ - */ - -/** - * @brief Configures the Synchronization Shift Control Settings. - * @note When REFCKON is set, firmware must not write to Shift control register - * @param RTC_ShiftAdd1S : Select to add or not 1 second to the time Calendar. - * This parameter can be one of the following values : - * @arg RTC_ShiftAdd1S_Set : Add one second to the clock calendar. - * @arg RTC_ShiftAdd1S_Reset: No effect. - * @param RTC_ShiftSubFS: Select the number of Second Fractions to Substitute. - * This parameter can be one any value from 0 to 0x7FFF. - * @retval An ErrorStatus enumeration value: - * - SUCCESS: RTC Shift registers are configured - * - ERROR: RTC Shift registers are not configured -*/ -ErrorStatus RTC_SynchroShiftConfig(uint32_t RTC_ShiftAdd1S, uint32_t RTC_ShiftSubFS) -{ - ErrorStatus status = ERROR; - uint32_t shpfcount = 0; - - /* Check the parameters */ - assert_param(IS_RTC_SHIFT_ADD1S(RTC_ShiftAdd1S)); - assert_param(IS_RTC_SHIFT_SUBFS(RTC_ShiftSubFS)); - - /* Disable the write protection for RTC registers */ - RTC->WPR = 0xCA; - RTC->WPR = 0x53; - - /* Check if a Shift is pending*/ - if ((RTC->ISR & RTC_ISR_SHPF) != RESET) - { - /* Wait until the shift is completed*/ - while (((RTC->ISR & RTC_ISR_SHPF) != RESET) && (shpfcount != SHPF_TIMEOUT)) - { - shpfcount++; - } - } - - /* Check if the Shift pending is completed or if there is no Shift operation at all*/ - if ((RTC->ISR & RTC_ISR_SHPF) == RESET) - { - /* check if the reference clock detection is disabled */ - if((RTC->CR & RTC_CR_REFCKON) == RESET) - { - /* Configure the Shift settings */ - RTC->SHIFTR = (uint32_t)(uint32_t)(RTC_ShiftSubFS) | (uint32_t)(RTC_ShiftAdd1S); - - if(RTC_WaitForSynchro() == ERROR) - { - status = ERROR; - } - else - { - status = SUCCESS; - } - } - else - { - status = ERROR; - } - } - else - { - status = ERROR; - } - - /* Enable the write protection for RTC registers */ - RTC->WPR = 0xFF; - - return (ErrorStatus)(status); -} - -/** - * @} - */ - -/** @defgroup RTC_Group13 Interrupts and flags management functions - * @brief Interrupts and flags management functions - * -@verbatim - =============================================================================== - ##### Interrupts and flags management functions ##### - =============================================================================== - [..] All RTC interrupts are connected to the EXTI controller. - - (+) To enable the RTC Alarm interrupt, the following sequence is required: - (++) Configure and enable the EXTI Line 17 in interrupt mode and select - the rising edge sensitivity using the EXTI_Init() function. - (++) Configure and enable the RTC_Alarm IRQ channel in the NVIC using the - NVIC_Init() function. - (++) Configure the RTC to generate RTC alarms (Alarm A and/or Alarm B) using - the RTC_SetAlarm() and RTC_AlarmCmd() functions. - - (+) To enable the RTC Wakeup interrupt, the following sequence is required: - (++) Configure and enable the EXTI Line 22 in interrupt mode and select the - rising edge sensitivity using the EXTI_Init() function. - (++) Configure and enable the RTC_WKUP IRQ channel in the NVIC using the - NVIC_Init() function. - (++) Configure the RTC to generate the RTC wakeup timer event using the - RTC_WakeUpClockConfig(), RTC_SetWakeUpCounter() and RTC_WakeUpCmd() - functions. - - (+) To enable the RTC Tamper interrupt, the following sequence is required: - (++) Configure and enable the EXTI Line 21 in interrupt mode and select - the rising edge sensitivity using the EXTI_Init() function. - (++) Configure and enable the TAMP_STAMP IRQ channel in the NVIC using the - NVIC_Init() function. - (++) Configure the RTC to detect the RTC tamper event using the - RTC_TamperTriggerConfig() and RTC_TamperCmd() functions. - - (+) To enable the RTC TimeStamp interrupt, the following sequence is required: - (++) Configure and enable the EXTI Line 21 in interrupt mode and select the - rising edge sensitivity using the EXTI_Init() function. - (++) Configure and enable the TAMP_STAMP IRQ channel in the NVIC using the - NVIC_Init() function. - (++) Configure the RTC to detect the RTC time stamp event using the - RTC_TimeStampCmd() functions. - -@endverbatim - * @{ - */ - -/** - * @brief Enables or disables the specified RTC interrupts. - * @param RTC_IT: specifies the RTC interrupt sources to be enabled or disabled. - * This parameter can be any combination of the following values: - * @arg RTC_IT_TS: Time Stamp interrupt mask - * @arg RTC_IT_WUT: WakeUp Timer interrupt mask - * @arg RTC_IT_ALRB: Alarm B interrupt mask - * @arg RTC_IT_ALRA: Alarm A interrupt mask - * @arg RTC_IT_TAMP: Tamper event interrupt mask - * @param NewState: new state of the specified RTC interrupts. - * This parameter can be: ENABLE or DISABLE. - * @retval None - */ -void RTC_ITConfig(uint32_t RTC_IT, FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_RTC_CONFIG_IT(RTC_IT)); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - - /* Disable the write protection for RTC registers */ - RTC->WPR = 0xCA; - RTC->WPR = 0x53; - - if (NewState != DISABLE) - { - /* Configure the Interrupts in the RTC_CR register */ - RTC->CR |= (uint32_t)(RTC_IT & ~RTC_TAFCR_TAMPIE); - /* Configure the Tamper Interrupt in the RTC_TAFCR */ - RTC->TAFCR |= (uint32_t)(RTC_IT & RTC_TAFCR_TAMPIE); - } - else - { - /* Configure the Interrupts in the RTC_CR register */ - RTC->CR &= (uint32_t)~(RTC_IT & (uint32_t)~RTC_TAFCR_TAMPIE); - /* Configure the Tamper Interrupt in the RTC_TAFCR */ - RTC->TAFCR &= (uint32_t)~(RTC_IT & RTC_TAFCR_TAMPIE); - } - /* Enable the write protection for RTC registers */ - RTC->WPR = 0xFF; -} - -/** - * @brief Checks whether the specified RTC flag is set or not. - * @param RTC_FLAG: specifies the flag to check. - * This parameter can be one of the following values: - * @arg RTC_FLAG_RECALPF: RECALPF event flag. - * @arg RTC_FLAG_TAMP1F: Tamper 1 event flag - * @arg RTC_FLAG_TSOVF: Time Stamp OverFlow flag - * @arg RTC_FLAG_TSF: Time Stamp event flag - * @arg RTC_FLAG_WUTF: WakeUp Timer flag - * @arg RTC_FLAG_ALRBF: Alarm B flag - * @arg RTC_FLAG_ALRAF: Alarm A flag - * @arg RTC_FLAG_INITF: Initialization mode flag - * @arg RTC_FLAG_RSF: Registers Synchronized flag - * @arg RTC_FLAG_INITS: Registers Configured flag - * @arg RTC_FLAG_SHPF: Shift operation pending flag. - * @arg RTC_FLAG_WUTWF: WakeUp Timer Write flag - * @arg RTC_FLAG_ALRBWF: Alarm B Write flag - * @arg RTC_FLAG_ALRAWF: Alarm A write flag - * @retval The new state of RTC_FLAG (SET or RESET). - */ -FlagStatus RTC_GetFlagStatus(uint32_t RTC_FLAG) -{ - FlagStatus bitstatus = RESET; - uint32_t tmpreg = 0; - - /* Check the parameters */ - assert_param(IS_RTC_GET_FLAG(RTC_FLAG)); - - /* Get all the flags */ - tmpreg = (uint32_t)(RTC->ISR & RTC_FLAGS_MASK); - - /* Return the status of the flag */ - if ((tmpreg & RTC_FLAG) != (uint32_t)RESET) - { - bitstatus = SET; - } - else - { - bitstatus = RESET; - } - return bitstatus; -} - -/** - * @brief Clears the RTC's pending flags. - * @param RTC_FLAG: specifies the RTC flag to clear. - * This parameter can be any combination of the following values: - * @arg RTC_FLAG_TAMP1F: Tamper 1 event flag - * @arg RTC_FLAG_TSOVF: Time Stamp Overflow flag - * @arg RTC_FLAG_TSF: Time Stamp event flag - * @arg RTC_FLAG_WUTF: WakeUp Timer flag - * @arg RTC_FLAG_ALRBF: Alarm B flag - * @arg RTC_FLAG_ALRAF: Alarm A flag - * @arg RTC_FLAG_RSF: Registers Synchronized flag - * @retval None - */ -void RTC_ClearFlag(uint32_t RTC_FLAG) -{ - /* Check the parameters */ - assert_param(IS_RTC_CLEAR_FLAG(RTC_FLAG)); - - /* Clear the Flags in the RTC_ISR register */ - RTC->ISR = (uint32_t)((uint32_t)(~((RTC_FLAG | RTC_ISR_INIT)& 0x0000FFFF) | (uint32_t)(RTC->ISR & RTC_ISR_INIT))); -} - -/** - * @brief Checks whether the specified RTC interrupt has occurred or not. - * @param RTC_IT: specifies the RTC interrupt source to check. - * This parameter can be one of the following values: - * @arg RTC_IT_TS: Time Stamp interrupt - * @arg RTC_IT_WUT: WakeUp Timer interrupt - * @arg RTC_IT_ALRB: Alarm B interrupt - * @arg RTC_IT_ALRA: Alarm A interrupt - * @arg RTC_IT_TAMP1: Tamper 1 event interrupt - * @retval The new state of RTC_IT (SET or RESET). - */ -ITStatus RTC_GetITStatus(uint32_t RTC_IT) -{ - ITStatus bitstatus = RESET; - uint32_t tmpreg = 0, enablestatus = 0; - - /* Check the parameters */ - assert_param(IS_RTC_GET_IT(RTC_IT)); - - /* Get the TAMPER Interrupt enable bit and pending bit */ - tmpreg = (uint32_t)(RTC->TAFCR & (RTC_TAFCR_TAMPIE)); - - /* Get the Interrupt enable Status */ - enablestatus = (uint32_t)((RTC->CR & RTC_IT) | (tmpreg & (RTC_IT >> 15))); - - /* Get the Interrupt pending bit */ - tmpreg = (uint32_t)((RTC->ISR & (uint32_t)(RTC_IT >> 4))); - - /* Get the status of the Interrupt */ - if ((enablestatus != (uint32_t)RESET) && ((tmpreg & 0x0000FFFF) != (uint32_t)RESET)) - { - bitstatus = SET; - } - else - { - bitstatus = RESET; - } - return bitstatus; -} - -/** - * @brief Clears the RTC's interrupt pending bits. - * @param RTC_IT: specifies the RTC interrupt pending bit to clear. - * This parameter can be any combination of the following values: - * @arg RTC_IT_TS: Time Stamp interrupt - * @arg RTC_IT_WUT: WakeUp Timer interrupt - * @arg RTC_IT_ALRB: Alarm B interrupt - * @arg RTC_IT_ALRA: Alarm A interrupt - * @arg RTC_IT_TAMP1: Tamper 1 event interrupt - * @retval None - */ -void RTC_ClearITPendingBit(uint32_t RTC_IT) -{ - uint32_t tmpreg = 0; - - /* Check the parameters */ - assert_param(IS_RTC_CLEAR_IT(RTC_IT)); - - /* Get the RTC_ISR Interrupt pending bits mask */ - tmpreg = (uint32_t)(RTC_IT >> 4); - - /* Clear the interrupt pending bits in the RTC_ISR register */ - RTC->ISR = (uint32_t)((uint32_t)(~((tmpreg | RTC_ISR_INIT)& 0x0000FFFF) | (uint32_t)(RTC->ISR & RTC_ISR_INIT))); -} - -/** - * @} - */ - -/** - * @brief Converts a 2 digit decimal to BCD format. - * @param Value: Byte to be converted. - * @retval Converted byte - */ -static uint8_t RTC_ByteToBcd2(uint8_t Value) -{ - uint8_t bcdhigh = 0; - - while (Value >= 10) - { - bcdhigh++; - Value -= 10; - } - - return ((uint8_t)(bcdhigh << 4) | Value); -} - -/** - * @brief Convert from 2 digit BCD to Binary. - * @param Value: BCD value to be converted. - * @retval Converted word - */ -static uint8_t RTC_Bcd2ToByte(uint8_t Value) -{ - uint8_t tmp = 0; - tmp = ((uint8_t)(Value & (uint8_t)0xF0) >> (uint8_t)0x4) * 10; - return (tmp + (Value & (uint8_t)0x0F)); -} - -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/stm/lib/stm32f4xx_rtc.h b/stm/lib/stm32f4xx_rtc.h deleted file mode 100644 index a46227e53..000000000 --- a/stm/lib/stm32f4xx_rtc.h +++ /dev/null @@ -1,881 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f4xx_rtc.h - * @author MCD Application Team - * @version V1.3.0 - * @date 08-November-2013 - * @brief This file contains all the functions prototypes for the RTC firmware - * library. - ****************************************************************************** - * @attention - * - *

© COPYRIGHT 2013 STMicroelectronics

- * - * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License"); - * You may not use this file except in compliance with the License. - * You may obtain a copy of the License at: - * - * http://www.st.com/software_license_agreement_liberty_v2 - * - * Unless required by applicable law or agreed to in writing, software - * distributed under the License is distributed on an "AS IS" BASIS, - * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - * See the License for the specific language governing permissions and - * limitations under the License. - * - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F4xx_RTC_H -#define __STM32F4xx_RTC_H - -#ifdef __cplusplus - extern "C" { -#endif - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx.h" - -/** @addtogroup STM32F4xx_StdPeriph_Driver - * @{ - */ - -/** @addtogroup RTC - * @{ - */ - -/* Exported types ------------------------------------------------------------*/ - -/** - * @brief RTC Init structures definition - */ -typedef struct -{ - uint32_t RTC_HourFormat; /*!< Specifies the RTC Hour Format. - This parameter can be a value of @ref RTC_Hour_Formats */ - - uint32_t RTC_AsynchPrediv; /*!< Specifies the RTC Asynchronous Predivider value. - This parameter must be set to a value lower than 0x7F */ - - uint32_t RTC_SynchPrediv; /*!< Specifies the RTC Synchronous Predivider value. - This parameter must be set to a value lower than 0x7FFF */ -}RTC_InitTypeDef; - -/** - * @brief RTC Time structure definition - */ -typedef struct -{ - uint8_t RTC_Hours; /*!< Specifies the RTC Time Hour. - This parameter must be set to a value in the 0-12 range - if the RTC_HourFormat_12 is selected or 0-23 range if - the RTC_HourFormat_24 is selected. */ - - uint8_t RTC_Minutes; /*!< Specifies the RTC Time Minutes. - This parameter must be set to a value in the 0-59 range. */ - - uint8_t RTC_Seconds; /*!< Specifies the RTC Time Seconds. - This parameter must be set to a value in the 0-59 range. */ - - uint8_t RTC_H12; /*!< Specifies the RTC AM/PM Time. - This parameter can be a value of @ref RTC_AM_PM_Definitions */ -}RTC_TimeTypeDef; - -/** - * @brief RTC Date structure definition - */ -typedef struct -{ - uint8_t RTC_WeekDay; /*!< Specifies the RTC Date WeekDay. - This parameter can be a value of @ref RTC_WeekDay_Definitions */ - - uint8_t RTC_Month; /*!< Specifies the RTC Date Month (in BCD format). - This parameter can be a value of @ref RTC_Month_Date_Definitions */ - - uint8_t RTC_Date; /*!< Specifies the RTC Date. - This parameter must be set to a value in the 1-31 range. */ - - uint8_t RTC_Year; /*!< Specifies the RTC Date Year. - This parameter must be set to a value in the 0-99 range. */ -}RTC_DateTypeDef; - -/** - * @brief RTC Alarm structure definition - */ -typedef struct -{ - RTC_TimeTypeDef RTC_AlarmTime; /*!< Specifies the RTC Alarm Time members. */ - - uint32_t RTC_AlarmMask; /*!< Specifies the RTC Alarm Masks. - This parameter can be a value of @ref RTC_AlarmMask_Definitions */ - - uint32_t RTC_AlarmDateWeekDaySel; /*!< Specifies the RTC Alarm is on Date or WeekDay. - This parameter can be a value of @ref RTC_AlarmDateWeekDay_Definitions */ - - uint8_t RTC_AlarmDateWeekDay; /*!< Specifies the RTC Alarm Date/WeekDay. - If the Alarm Date is selected, this parameter - must be set to a value in the 1-31 range. - If the Alarm WeekDay is selected, this - parameter can be a value of @ref RTC_WeekDay_Definitions */ -}RTC_AlarmTypeDef; - -/* Exported constants --------------------------------------------------------*/ - -/** @defgroup RTC_Exported_Constants - * @{ - */ - - -/** @defgroup RTC_Hour_Formats - * @{ - */ -#define RTC_HourFormat_24 ((uint32_t)0x00000000) -#define RTC_HourFormat_12 ((uint32_t)0x00000040) -#define IS_RTC_HOUR_FORMAT(FORMAT) (((FORMAT) == RTC_HourFormat_12) || \ - ((FORMAT) == RTC_HourFormat_24)) -/** - * @} - */ - -/** @defgroup RTC_Asynchronous_Predivider - * @{ - */ -#define IS_RTC_ASYNCH_PREDIV(PREDIV) ((PREDIV) <= 0x7F) - -/** - * @} - */ - - -/** @defgroup RTC_Synchronous_Predivider - * @{ - */ -#define IS_RTC_SYNCH_PREDIV(PREDIV) ((PREDIV) <= 0x7FFF) - -/** - * @} - */ - -/** @defgroup RTC_Time_Definitions - * @{ - */ -#define IS_RTC_HOUR12(HOUR) (((HOUR) > 0) && ((HOUR) <= 12)) -#define IS_RTC_HOUR24(HOUR) ((HOUR) <= 23) -#define IS_RTC_MINUTES(MINUTES) ((MINUTES) <= 59) -#define IS_RTC_SECONDS(SECONDS) ((SECONDS) <= 59) - -/** - * @} - */ - -/** @defgroup RTC_AM_PM_Definitions - * @{ - */ -#define RTC_H12_AM ((uint8_t)0x00) -#define RTC_H12_PM ((uint8_t)0x40) -#define IS_RTC_H12(PM) (((PM) == RTC_H12_AM) || ((PM) == RTC_H12_PM)) - -/** - * @} - */ - -/** @defgroup RTC_Year_Date_Definitions - * @{ - */ -#define IS_RTC_YEAR(YEAR) ((YEAR) <= 99) - -/** - * @} - */ - -/** @defgroup RTC_Month_Date_Definitions - * @{ - */ - -/* Coded in BCD format */ -#define RTC_Month_January ((uint8_t)0x01) -#define RTC_Month_February ((uint8_t)0x02) -#define RTC_Month_March ((uint8_t)0x03) -#define RTC_Month_April ((uint8_t)0x04) -#define RTC_Month_May ((uint8_t)0x05) -#define RTC_Month_June ((uint8_t)0x06) -#define RTC_Month_July ((uint8_t)0x07) -#define RTC_Month_August ((uint8_t)0x08) -#define RTC_Month_September ((uint8_t)0x09) -#define RTC_Month_October ((uint8_t)0x10) -#define RTC_Month_November ((uint8_t)0x11) -#define RTC_Month_December ((uint8_t)0x12) -#define IS_RTC_MONTH(MONTH) (((MONTH) >= 1) && ((MONTH) <= 12)) -#define IS_RTC_DATE(DATE) (((DATE) >= 1) && ((DATE) <= 31)) - -/** - * @} - */ - -/** @defgroup RTC_WeekDay_Definitions - * @{ - */ - -#define RTC_Weekday_Monday ((uint8_t)0x01) -#define RTC_Weekday_Tuesday ((uint8_t)0x02) -#define RTC_Weekday_Wednesday ((uint8_t)0x03) -#define RTC_Weekday_Thursday ((uint8_t)0x04) -#define RTC_Weekday_Friday ((uint8_t)0x05) -#define RTC_Weekday_Saturday ((uint8_t)0x06) -#define RTC_Weekday_Sunday ((uint8_t)0x07) -#define IS_RTC_WEEKDAY(WEEKDAY) (((WEEKDAY) == RTC_Weekday_Monday) || \ - ((WEEKDAY) == RTC_Weekday_Tuesday) || \ - ((WEEKDAY) == RTC_Weekday_Wednesday) || \ - ((WEEKDAY) == RTC_Weekday_Thursday) || \ - ((WEEKDAY) == RTC_Weekday_Friday) || \ - ((WEEKDAY) == RTC_Weekday_Saturday) || \ - ((WEEKDAY) == RTC_Weekday_Sunday)) -/** - * @} - */ - - -/** @defgroup RTC_Alarm_Definitions - * @{ - */ -#define IS_RTC_ALARM_DATE_WEEKDAY_DATE(DATE) (((DATE) > 0) && ((DATE) <= 31)) -#define IS_RTC_ALARM_DATE_WEEKDAY_WEEKDAY(WEEKDAY) (((WEEKDAY) == RTC_Weekday_Monday) || \ - ((WEEKDAY) == RTC_Weekday_Tuesday) || \ - ((WEEKDAY) == RTC_Weekday_Wednesday) || \ - ((WEEKDAY) == RTC_Weekday_Thursday) || \ - ((WEEKDAY) == RTC_Weekday_Friday) || \ - ((WEEKDAY) == RTC_Weekday_Saturday) || \ - ((WEEKDAY) == RTC_Weekday_Sunday)) - -/** - * @} - */ - - -/** @defgroup RTC_AlarmDateWeekDay_Definitions - * @{ - */ -#define RTC_AlarmDateWeekDaySel_Date ((uint32_t)0x00000000) -#define RTC_AlarmDateWeekDaySel_WeekDay ((uint32_t)0x40000000) - -#define IS_RTC_ALARM_DATE_WEEKDAY_SEL(SEL) (((SEL) == RTC_AlarmDateWeekDaySel_Date) || \ - ((SEL) == RTC_AlarmDateWeekDaySel_WeekDay)) - -/** - * @} - */ - - -/** @defgroup RTC_AlarmMask_Definitions - * @{ - */ -#define RTC_AlarmMask_None ((uint32_t)0x00000000) -#define RTC_AlarmMask_DateWeekDay ((uint32_t)0x80000000) -#define RTC_AlarmMask_Hours ((uint32_t)0x00800000) -#define RTC_AlarmMask_Minutes ((uint32_t)0x00008000) -#define RTC_AlarmMask_Seconds ((uint32_t)0x00000080) -#define RTC_AlarmMask_All ((uint32_t)0x80808080) -#define IS_ALARM_MASK(MASK) (((MASK) & 0x7F7F7F7F) == (uint32_t)RESET) - -/** - * @} - */ - -/** @defgroup RTC_Alarms_Definitions - * @{ - */ -#define RTC_Alarm_A ((uint32_t)0x00000100) -#define RTC_Alarm_B ((uint32_t)0x00000200) -#define IS_RTC_ALARM(ALARM) (((ALARM) == RTC_Alarm_A) || ((ALARM) == RTC_Alarm_B)) -#define IS_RTC_CMD_ALARM(ALARM) (((ALARM) & (RTC_Alarm_A | RTC_Alarm_B)) != (uint32_t)RESET) - -/** - * @} - */ - - /** @defgroup RTC_Alarm_Sub_Seconds_Masks_Definitions - * @{ - */ -#define RTC_AlarmSubSecondMask_All ((uint32_t)0x00000000) /*!< All Alarm SS fields are masked. - There is no comparison on sub seconds - for Alarm */ -#define RTC_AlarmSubSecondMask_SS14_1 ((uint32_t)0x01000000) /*!< SS[14:1] are don't care in Alarm - comparison. Only SS[0] is compared. */ -#define RTC_AlarmSubSecondMask_SS14_2 ((uint32_t)0x02000000) /*!< SS[14:2] are don't care in Alarm - comparison. Only SS[1:0] are compared */ -#define RTC_AlarmSubSecondMask_SS14_3 ((uint32_t)0x03000000) /*!< SS[14:3] are don't care in Alarm - comparison. Only SS[2:0] are compared */ -#define RTC_AlarmSubSecondMask_SS14_4 ((uint32_t)0x04000000) /*!< SS[14:4] are don't care in Alarm - comparison. Only SS[3:0] are compared */ -#define RTC_AlarmSubSecondMask_SS14_5 ((uint32_t)0x05000000) /*!< SS[14:5] are don't care in Alarm - comparison. Only SS[4:0] are compared */ -#define RTC_AlarmSubSecondMask_SS14_6 ((uint32_t)0x06000000) /*!< SS[14:6] are don't care in Alarm - comparison. Only SS[5:0] are compared */ -#define RTC_AlarmSubSecondMask_SS14_7 ((uint32_t)0x07000000) /*!< SS[14:7] are don't care in Alarm - comparison. Only SS[6:0] are compared */ -#define RTC_AlarmSubSecondMask_SS14_8 ((uint32_t)0x08000000) /*!< SS[14:8] are don't care in Alarm - comparison. Only SS[7:0] are compared */ -#define RTC_AlarmSubSecondMask_SS14_9 ((uint32_t)0x09000000) /*!< SS[14:9] are don't care in Alarm - comparison. Only SS[8:0] are compared */ -#define RTC_AlarmSubSecondMask_SS14_10 ((uint32_t)0x0A000000) /*!< SS[14:10] are don't care in Alarm - comparison. Only SS[9:0] are compared */ -#define RTC_AlarmSubSecondMask_SS14_11 ((uint32_t)0x0B000000) /*!< SS[14:11] are don't care in Alarm - comparison. Only SS[10:0] are compared */ -#define RTC_AlarmSubSecondMask_SS14_12 ((uint32_t)0x0C000000) /*!< SS[14:12] are don't care in Alarm - comparison.Only SS[11:0] are compared */ -#define RTC_AlarmSubSecondMask_SS14_13 ((uint32_t)0x0D000000) /*!< SS[14:13] are don't care in Alarm - comparison. Only SS[12:0] are compared */ -#define RTC_AlarmSubSecondMask_SS14 ((uint32_t)0x0E000000) /*!< SS[14] is don't care in Alarm - comparison.Only SS[13:0] are compared */ -#define RTC_AlarmSubSecondMask_None ((uint32_t)0x0F000000) /*!< SS[14:0] are compared and must match - to activate alarm. */ -#define IS_RTC_ALARM_SUB_SECOND_MASK(MASK) (((MASK) == RTC_AlarmSubSecondMask_All) || \ - ((MASK) == RTC_AlarmSubSecondMask_SS14_1) || \ - ((MASK) == RTC_AlarmSubSecondMask_SS14_2) || \ - ((MASK) == RTC_AlarmSubSecondMask_SS14_3) || \ - ((MASK) == RTC_AlarmSubSecondMask_SS14_4) || \ - ((MASK) == RTC_AlarmSubSecondMask_SS14_5) || \ - ((MASK) == RTC_AlarmSubSecondMask_SS14_6) || \ - ((MASK) == RTC_AlarmSubSecondMask_SS14_7) || \ - ((MASK) == RTC_AlarmSubSecondMask_SS14_8) || \ - ((MASK) == RTC_AlarmSubSecondMask_SS14_9) || \ - ((MASK) == RTC_AlarmSubSecondMask_SS14_10) || \ - ((MASK) == RTC_AlarmSubSecondMask_SS14_11) || \ - ((MASK) == RTC_AlarmSubSecondMask_SS14_12) || \ - ((MASK) == RTC_AlarmSubSecondMask_SS14_13) || \ - ((MASK) == RTC_AlarmSubSecondMask_SS14) || \ - ((MASK) == RTC_AlarmSubSecondMask_None)) -/** - * @} - */ - -/** @defgroup RTC_Alarm_Sub_Seconds_Value - * @{ - */ - -#define IS_RTC_ALARM_SUB_SECOND_VALUE(VALUE) ((VALUE) <= 0x00007FFF) - -/** - * @} - */ - -/** @defgroup RTC_Wakeup_Timer_Definitions - * @{ - */ -#define RTC_WakeUpClock_RTCCLK_Div16 ((uint32_t)0x00000000) -#define RTC_WakeUpClock_RTCCLK_Div8 ((uint32_t)0x00000001) -#define RTC_WakeUpClock_RTCCLK_Div4 ((uint32_t)0x00000002) -#define RTC_WakeUpClock_RTCCLK_Div2 ((uint32_t)0x00000003) -#define RTC_WakeUpClock_CK_SPRE_16bits ((uint32_t)0x00000004) -#define RTC_WakeUpClock_CK_SPRE_17bits ((uint32_t)0x00000006) -#define IS_RTC_WAKEUP_CLOCK(CLOCK) (((CLOCK) == RTC_WakeUpClock_RTCCLK_Div16) || \ - ((CLOCK) == RTC_WakeUpClock_RTCCLK_Div8) || \ - ((CLOCK) == RTC_WakeUpClock_RTCCLK_Div4) || \ - ((CLOCK) == RTC_WakeUpClock_RTCCLK_Div2) || \ - ((CLOCK) == RTC_WakeUpClock_CK_SPRE_16bits) || \ - ((CLOCK) == RTC_WakeUpClock_CK_SPRE_17bits)) -#define IS_RTC_WAKEUP_COUNTER(COUNTER) ((COUNTER) <= 0xFFFF) -/** - * @} - */ - -/** @defgroup RTC_Time_Stamp_Edges_definitions - * @{ - */ -#define RTC_TimeStampEdge_Rising ((uint32_t)0x00000000) -#define RTC_TimeStampEdge_Falling ((uint32_t)0x00000008) -#define IS_RTC_TIMESTAMP_EDGE(EDGE) (((EDGE) == RTC_TimeStampEdge_Rising) || \ - ((EDGE) == RTC_TimeStampEdge_Falling)) -/** - * @} - */ - -/** @defgroup RTC_Output_selection_Definitions - * @{ - */ -#define RTC_Output_Disable ((uint32_t)0x00000000) -#define RTC_Output_AlarmA ((uint32_t)0x00200000) -#define RTC_Output_AlarmB ((uint32_t)0x00400000) -#define RTC_Output_WakeUp ((uint32_t)0x00600000) - -#define IS_RTC_OUTPUT(OUTPUT) (((OUTPUT) == RTC_Output_Disable) || \ - ((OUTPUT) == RTC_Output_AlarmA) || \ - ((OUTPUT) == RTC_Output_AlarmB) || \ - ((OUTPUT) == RTC_Output_WakeUp)) - -/** - * @} - */ - -/** @defgroup RTC_Output_Polarity_Definitions - * @{ - */ -#define RTC_OutputPolarity_High ((uint32_t)0x00000000) -#define RTC_OutputPolarity_Low ((uint32_t)0x00100000) -#define IS_RTC_OUTPUT_POL(POL) (((POL) == RTC_OutputPolarity_High) || \ - ((POL) == RTC_OutputPolarity_Low)) -/** - * @} - */ - - -/** @defgroup RTC_Digital_Calibration_Definitions - * @{ - */ -#define RTC_CalibSign_Positive ((uint32_t)0x00000000) -#define RTC_CalibSign_Negative ((uint32_t)0x00000080) -#define IS_RTC_CALIB_SIGN(SIGN) (((SIGN) == RTC_CalibSign_Positive) || \ - ((SIGN) == RTC_CalibSign_Negative)) -#define IS_RTC_CALIB_VALUE(VALUE) ((VALUE) < 0x20) - -/** - * @} - */ - - /** @defgroup RTC_Calib_Output_selection_Definitions - * @{ - */ -#define RTC_CalibOutput_512Hz ((uint32_t)0x00000000) -#define RTC_CalibOutput_1Hz ((uint32_t)0x00080000) -#define IS_RTC_CALIB_OUTPUT(OUTPUT) (((OUTPUT) == RTC_CalibOutput_512Hz) || \ - ((OUTPUT) == RTC_CalibOutput_1Hz)) -/** - * @} - */ - -/** @defgroup RTC_Smooth_calib_period_Definitions - * @{ - */ -#define RTC_SmoothCalibPeriod_32sec ((uint32_t)0x00000000) /*!< if RTCCLK = 32768 Hz, Smooth calibation - period is 32s, else 2exp20 RTCCLK seconds */ -#define RTC_SmoothCalibPeriod_16sec ((uint32_t)0x00002000) /*!< if RTCCLK = 32768 Hz, Smooth calibation - period is 16s, else 2exp19 RTCCLK seconds */ -#define RTC_SmoothCalibPeriod_8sec ((uint32_t)0x00004000) /*!< if RTCCLK = 32768 Hz, Smooth calibation - period is 8s, else 2exp18 RTCCLK seconds */ -#define IS_RTC_SMOOTH_CALIB_PERIOD(PERIOD) (((PERIOD) == RTC_SmoothCalibPeriod_32sec) || \ - ((PERIOD) == RTC_SmoothCalibPeriod_16sec) || \ - ((PERIOD) == RTC_SmoothCalibPeriod_8sec)) - -/** - * @} - */ - -/** @defgroup RTC_Smooth_calib_Plus_pulses_Definitions - * @{ - */ -#define RTC_SmoothCalibPlusPulses_Set ((uint32_t)0x00008000) /*!< The number of RTCCLK pulses added - during a X -second window = Y - CALM[8:0]. - with Y = 512, 256, 128 when X = 32, 16, 8 */ -#define RTC_SmoothCalibPlusPulses_Reset ((uint32_t)0x00000000) /*!< The number of RTCCLK pulses subbstited - during a 32-second window = CALM[8:0]. */ -#define IS_RTC_SMOOTH_CALIB_PLUS(PLUS) (((PLUS) == RTC_SmoothCalibPlusPulses_Set) || \ - ((PLUS) == RTC_SmoothCalibPlusPulses_Reset)) - -/** - * @} - */ - -/** @defgroup RTC_Smooth_calib_Minus_pulses_Definitions - * @{ - */ -#define IS_RTC_SMOOTH_CALIB_MINUS(VALUE) ((VALUE) <= 0x000001FF) - -/** - * @} - */ - -/** @defgroup RTC_DayLightSaving_Definitions - * @{ - */ -#define RTC_DayLightSaving_SUB1H ((uint32_t)0x00020000) -#define RTC_DayLightSaving_ADD1H ((uint32_t)0x00010000) -#define IS_RTC_DAYLIGHT_SAVING(SAVE) (((SAVE) == RTC_DayLightSaving_SUB1H) || \ - ((SAVE) == RTC_DayLightSaving_ADD1H)) - -#define RTC_StoreOperation_Reset ((uint32_t)0x00000000) -#define RTC_StoreOperation_Set ((uint32_t)0x00040000) -#define IS_RTC_STORE_OPERATION(OPERATION) (((OPERATION) == RTC_StoreOperation_Reset) || \ - ((OPERATION) == RTC_StoreOperation_Set)) -/** - * @} - */ - -/** @defgroup RTC_Tamper_Trigger_Definitions - * @{ - */ -#define RTC_TamperTrigger_RisingEdge ((uint32_t)0x00000000) -#define RTC_TamperTrigger_FallingEdge ((uint32_t)0x00000001) -#define RTC_TamperTrigger_LowLevel ((uint32_t)0x00000000) -#define RTC_TamperTrigger_HighLevel ((uint32_t)0x00000001) -#define IS_RTC_TAMPER_TRIGGER(TRIGGER) (((TRIGGER) == RTC_TamperTrigger_RisingEdge) || \ - ((TRIGGER) == RTC_TamperTrigger_FallingEdge) || \ - ((TRIGGER) == RTC_TamperTrigger_LowLevel) || \ - ((TRIGGER) == RTC_TamperTrigger_HighLevel)) - -/** - * @} - */ - -/** @defgroup RTC_Tamper_Filter_Definitions - * @{ - */ -#define RTC_TamperFilter_Disable ((uint32_t)0x00000000) /*!< Tamper filter is disabled */ - -#define RTC_TamperFilter_2Sample ((uint32_t)0x00000800) /*!< Tamper is activated after 2 - consecutive samples at the active level */ -#define RTC_TamperFilter_4Sample ((uint32_t)0x00001000) /*!< Tamper is activated after 4 - consecutive samples at the active level */ -#define RTC_TamperFilter_8Sample ((uint32_t)0x00001800) /*!< Tamper is activated after 8 - consecutive samples at the active leve. */ -#define IS_RTC_TAMPER_FILTER(FILTER) (((FILTER) == RTC_TamperFilter_Disable) || \ - ((FILTER) == RTC_TamperFilter_2Sample) || \ - ((FILTER) == RTC_TamperFilter_4Sample) || \ - ((FILTER) == RTC_TamperFilter_8Sample)) -/** - * @} - */ - -/** @defgroup RTC_Tamper_Sampling_Frequencies_Definitions - * @{ - */ -#define RTC_TamperSamplingFreq_RTCCLK_Div32768 ((uint32_t)0x00000000) /*!< Each of the tamper inputs are sampled - with a frequency = RTCCLK / 32768 */ -#define RTC_TamperSamplingFreq_RTCCLK_Div16384 ((uint32_t)0x000000100) /*!< Each of the tamper inputs are sampled - with a frequency = RTCCLK / 16384 */ -#define RTC_TamperSamplingFreq_RTCCLK_Div8192 ((uint32_t)0x00000200) /*!< Each of the tamper inputs are sampled - with a frequency = RTCCLK / 8192 */ -#define RTC_TamperSamplingFreq_RTCCLK_Div4096 ((uint32_t)0x00000300) /*!< Each of the tamper inputs are sampled - with a frequency = RTCCLK / 4096 */ -#define RTC_TamperSamplingFreq_RTCCLK_Div2048 ((uint32_t)0x00000400) /*!< Each of the tamper inputs are sampled - with a frequency = RTCCLK / 2048 */ -#define RTC_TamperSamplingFreq_RTCCLK_Div1024 ((uint32_t)0x00000500) /*!< Each of the tamper inputs are sampled - with a frequency = RTCCLK / 1024 */ -#define RTC_TamperSamplingFreq_RTCCLK_Div512 ((uint32_t)0x00000600) /*!< Each of the tamper inputs are sampled - with a frequency = RTCCLK / 512 */ -#define RTC_TamperSamplingFreq_RTCCLK_Div256 ((uint32_t)0x00000700) /*!< Each of the tamper inputs are sampled - with a frequency = RTCCLK / 256 */ -#define IS_RTC_TAMPER_SAMPLING_FREQ(FREQ) (((FREQ) ==RTC_TamperSamplingFreq_RTCCLK_Div32768) || \ - ((FREQ) ==RTC_TamperSamplingFreq_RTCCLK_Div16384) || \ - ((FREQ) ==RTC_TamperSamplingFreq_RTCCLK_Div8192) || \ - ((FREQ) ==RTC_TamperSamplingFreq_RTCCLK_Div4096) || \ - ((FREQ) ==RTC_TamperSamplingFreq_RTCCLK_Div2048) || \ - ((FREQ) ==RTC_TamperSamplingFreq_RTCCLK_Div1024) || \ - ((FREQ) ==RTC_TamperSamplingFreq_RTCCLK_Div512) || \ - ((FREQ) ==RTC_TamperSamplingFreq_RTCCLK_Div256)) - -/** - * @} - */ - - /** @defgroup RTC_Tamper_Pin_Precharge_Duration_Definitions - * @{ - */ -#define RTC_TamperPrechargeDuration_1RTCCLK ((uint32_t)0x00000000) /*!< Tamper pins are pre-charged before - sampling during 1 RTCCLK cycle */ -#define RTC_TamperPrechargeDuration_2RTCCLK ((uint32_t)0x00002000) /*!< Tamper pins are pre-charged before - sampling during 2 RTCCLK cycles */ -#define RTC_TamperPrechargeDuration_4RTCCLK ((uint32_t)0x00004000) /*!< Tamper pins are pre-charged before - sampling during 4 RTCCLK cycles */ -#define RTC_TamperPrechargeDuration_8RTCCLK ((uint32_t)0x00006000) /*!< Tamper pins are pre-charged before - sampling during 8 RTCCLK cycles */ - -#define IS_RTC_TAMPER_PRECHARGE_DURATION(DURATION) (((DURATION) == RTC_TamperPrechargeDuration_1RTCCLK) || \ - ((DURATION) == RTC_TamperPrechargeDuration_2RTCCLK) || \ - ((DURATION) == RTC_TamperPrechargeDuration_4RTCCLK) || \ - ((DURATION) == RTC_TamperPrechargeDuration_8RTCCLK)) -/** - * @} - */ - -/** @defgroup RTC_Tamper_Pins_Definitions - * @{ - */ -#define RTC_Tamper_1 RTC_TAFCR_TAMP1E -#define IS_RTC_TAMPER(TAMPER) (((TAMPER) == RTC_Tamper_1)) - -/** - * @} - */ - -/** @defgroup RTC_Tamper_Pin_Selection - * @{ - */ -#define RTC_TamperPin_PC13 ((uint32_t)0x00000000) -#define RTC_TamperPin_PI8 ((uint32_t)0x00010000) -#define IS_RTC_TAMPER_PIN(PIN) (((PIN) == RTC_TamperPin_PC13) || \ - ((PIN) == RTC_TamperPin_PI8)) -/** - * @} - */ - -/** @defgroup RTC_TimeStamp_Pin_Selection - * @{ - */ -#define RTC_TimeStampPin_PC13 ((uint32_t)0x00000000) -#define RTC_TimeStampPin_PI8 ((uint32_t)0x00020000) -#define IS_RTC_TIMESTAMP_PIN(PIN) (((PIN) == RTC_TimeStampPin_PC13) || \ - ((PIN) == RTC_TimeStampPin_PI8)) -/** - * @} - */ - -/** @defgroup RTC_Output_Type_ALARM_OUT - * @{ - */ -#define RTC_OutputType_OpenDrain ((uint32_t)0x00000000) -#define RTC_OutputType_PushPull ((uint32_t)0x00040000) -#define IS_RTC_OUTPUT_TYPE(TYPE) (((TYPE) == RTC_OutputType_OpenDrain) || \ - ((TYPE) == RTC_OutputType_PushPull)) - -/** - * @} - */ - -/** @defgroup RTC_Add_1_Second_Parameter_Definitions - * @{ - */ -#define RTC_ShiftAdd1S_Reset ((uint32_t)0x00000000) -#define RTC_ShiftAdd1S_Set ((uint32_t)0x80000000) -#define IS_RTC_SHIFT_ADD1S(SEL) (((SEL) == RTC_ShiftAdd1S_Reset) || \ - ((SEL) == RTC_ShiftAdd1S_Set)) -/** - * @} - */ - -/** @defgroup RTC_Substract_Fraction_Of_Second_Value - * @{ - */ -#define IS_RTC_SHIFT_SUBFS(FS) ((FS) <= 0x00007FFF) - -/** - * @} - */ - -/** @defgroup RTC_Backup_Registers_Definitions - * @{ - */ - -#define RTC_BKP_DR0 ((uint32_t)0x00000000) -#define RTC_BKP_DR1 ((uint32_t)0x00000001) -#define RTC_BKP_DR2 ((uint32_t)0x00000002) -#define RTC_BKP_DR3 ((uint32_t)0x00000003) -#define RTC_BKP_DR4 ((uint32_t)0x00000004) -#define RTC_BKP_DR5 ((uint32_t)0x00000005) -#define RTC_BKP_DR6 ((uint32_t)0x00000006) -#define RTC_BKP_DR7 ((uint32_t)0x00000007) -#define RTC_BKP_DR8 ((uint32_t)0x00000008) -#define RTC_BKP_DR9 ((uint32_t)0x00000009) -#define RTC_BKP_DR10 ((uint32_t)0x0000000A) -#define RTC_BKP_DR11 ((uint32_t)0x0000000B) -#define RTC_BKP_DR12 ((uint32_t)0x0000000C) -#define RTC_BKP_DR13 ((uint32_t)0x0000000D) -#define RTC_BKP_DR14 ((uint32_t)0x0000000E) -#define RTC_BKP_DR15 ((uint32_t)0x0000000F) -#define RTC_BKP_DR16 ((uint32_t)0x00000010) -#define RTC_BKP_DR17 ((uint32_t)0x00000011) -#define RTC_BKP_DR18 ((uint32_t)0x00000012) -#define RTC_BKP_DR19 ((uint32_t)0x00000013) -#define IS_RTC_BKP(BKP) (((BKP) == RTC_BKP_DR0) || \ - ((BKP) == RTC_BKP_DR1) || \ - ((BKP) == RTC_BKP_DR2) || \ - ((BKP) == RTC_BKP_DR3) || \ - ((BKP) == RTC_BKP_DR4) || \ - ((BKP) == RTC_BKP_DR5) || \ - ((BKP) == RTC_BKP_DR6) || \ - ((BKP) == RTC_BKP_DR7) || \ - ((BKP) == RTC_BKP_DR8) || \ - ((BKP) == RTC_BKP_DR9) || \ - ((BKP) == RTC_BKP_DR10) || \ - ((BKP) == RTC_BKP_DR11) || \ - ((BKP) == RTC_BKP_DR12) || \ - ((BKP) == RTC_BKP_DR13) || \ - ((BKP) == RTC_BKP_DR14) || \ - ((BKP) == RTC_BKP_DR15) || \ - ((BKP) == RTC_BKP_DR16) || \ - ((BKP) == RTC_BKP_DR17) || \ - ((BKP) == RTC_BKP_DR18) || \ - ((BKP) == RTC_BKP_DR19)) -/** - * @} - */ - -/** @defgroup RTC_Input_parameter_format_definitions - * @{ - */ -#define RTC_Format_BIN ((uint32_t)0x000000000) -#define RTC_Format_BCD ((uint32_t)0x000000001) -#define IS_RTC_FORMAT(FORMAT) (((FORMAT) == RTC_Format_BIN) || ((FORMAT) == RTC_Format_BCD)) - -/** - * @} - */ - -/** @defgroup RTC_Flags_Definitions - * @{ - */ -#define RTC_FLAG_RECALPF ((uint32_t)0x00010000) -#define RTC_FLAG_TAMP1F ((uint32_t)0x00002000) -#define RTC_FLAG_TSOVF ((uint32_t)0x00001000) -#define RTC_FLAG_TSF ((uint32_t)0x00000800) -#define RTC_FLAG_WUTF ((uint32_t)0x00000400) -#define RTC_FLAG_ALRBF ((uint32_t)0x00000200) -#define RTC_FLAG_ALRAF ((uint32_t)0x00000100) -#define RTC_FLAG_INITF ((uint32_t)0x00000040) -#define RTC_FLAG_RSF ((uint32_t)0x00000020) -#define RTC_FLAG_INITS ((uint32_t)0x00000010) -#define RTC_FLAG_SHPF ((uint32_t)0x00000008) -#define RTC_FLAG_WUTWF ((uint32_t)0x00000004) -#define RTC_FLAG_ALRBWF ((uint32_t)0x00000002) -#define RTC_FLAG_ALRAWF ((uint32_t)0x00000001) -#define IS_RTC_GET_FLAG(FLAG) (((FLAG) == RTC_FLAG_TSOVF) || ((FLAG) == RTC_FLAG_TSF) || \ - ((FLAG) == RTC_FLAG_WUTF) || ((FLAG) == RTC_FLAG_ALRBF) || \ - ((FLAG) == RTC_FLAG_ALRAF) || ((FLAG) == RTC_FLAG_INITF) || \ - ((FLAG) == RTC_FLAG_RSF) || ((FLAG) == RTC_FLAG_WUTWF) || \ - ((FLAG) == RTC_FLAG_ALRBWF) || ((FLAG) == RTC_FLAG_ALRAWF) || \ - ((FLAG) == RTC_FLAG_TAMP1F) || ((FLAG) == RTC_FLAG_RECALPF) || \ - ((FLAG) == RTC_FLAG_SHPF)) -#define IS_RTC_CLEAR_FLAG(FLAG) (((FLAG) != (uint32_t)RESET) && (((FLAG) & 0xFFFF00DF) == (uint32_t)RESET)) -/** - * @} - */ - -/** @defgroup RTC_Interrupts_Definitions - * @{ - */ -#define RTC_IT_TS ((uint32_t)0x00008000) -#define RTC_IT_WUT ((uint32_t)0x00004000) -#define RTC_IT_ALRB ((uint32_t)0x00002000) -#define RTC_IT_ALRA ((uint32_t)0x00001000) -#define RTC_IT_TAMP ((uint32_t)0x00000004) /* Used only to Enable the Tamper Interrupt */ -#define RTC_IT_TAMP1 ((uint32_t)0x00020000) - -#define IS_RTC_CONFIG_IT(IT) (((IT) != (uint32_t)RESET) && (((IT) & 0xFFFF0FFB) == (uint32_t)RESET)) -#define IS_RTC_GET_IT(IT) (((IT) == RTC_IT_TS) || ((IT) == RTC_IT_WUT) || \ - ((IT) == RTC_IT_ALRB) || ((IT) == RTC_IT_ALRA) || \ - ((IT) == RTC_IT_TAMP1)) -#define IS_RTC_CLEAR_IT(IT) (((IT) != (uint32_t)RESET) && (((IT) & 0xFFFD0FFF) == (uint32_t)RESET)) - -/** - * @} - */ - -/** @defgroup RTC_Legacy - * @{ - */ -#define RTC_DigitalCalibConfig RTC_CoarseCalibConfig -#define RTC_DigitalCalibCmd RTC_CoarseCalibCmd - -/** - * @} - */ - -/** - * @} - */ - -/* Exported macro ------------------------------------------------------------*/ -/* Exported functions --------------------------------------------------------*/ - -/* Function used to set the RTC configuration to the default reset state *****/ -ErrorStatus RTC_DeInit(void); - -/* Initialization and Configuration functions *********************************/ -ErrorStatus RTC_Init(RTC_InitTypeDef* RTC_InitStruct); -void RTC_StructInit(RTC_InitTypeDef* RTC_InitStruct); -void RTC_WriteProtectionCmd(FunctionalState NewState); -ErrorStatus RTC_EnterInitMode(void); -void RTC_ExitInitMode(void); -ErrorStatus RTC_WaitForSynchro(void); -ErrorStatus RTC_RefClockCmd(FunctionalState NewState); -void RTC_BypassShadowCmd(FunctionalState NewState); - -/* Time and Date configuration functions **************************************/ -ErrorStatus RTC_SetTime(uint32_t RTC_Format, RTC_TimeTypeDef* RTC_TimeStruct); -void RTC_TimeStructInit(RTC_TimeTypeDef* RTC_TimeStruct); -void RTC_GetTime(uint32_t RTC_Format, RTC_TimeTypeDef* RTC_TimeStruct); -uint32_t RTC_GetSubSecond(void); -ErrorStatus RTC_SetDate(uint32_t RTC_Format, RTC_DateTypeDef* RTC_DateStruct); -void RTC_DateStructInit(RTC_DateTypeDef* RTC_DateStruct); -void RTC_GetDate(uint32_t RTC_Format, RTC_DateTypeDef* RTC_DateStruct); - -/* Alarms (Alarm A and Alarm B) configuration functions **********************/ -void RTC_SetAlarm(uint32_t RTC_Format, uint32_t RTC_Alarm, RTC_AlarmTypeDef* RTC_AlarmStruct); -void RTC_AlarmStructInit(RTC_AlarmTypeDef* RTC_AlarmStruct); -void RTC_GetAlarm(uint32_t RTC_Format, uint32_t RTC_Alarm, RTC_AlarmTypeDef* RTC_AlarmStruct); -ErrorStatus RTC_AlarmCmd(uint32_t RTC_Alarm, FunctionalState NewState); -void RTC_AlarmSubSecondConfig(uint32_t RTC_Alarm, uint32_t RTC_AlarmSubSecondValue, uint32_t RTC_AlarmSubSecondMask); -uint32_t RTC_GetAlarmSubSecond(uint32_t RTC_Alarm); - -/* WakeUp Timer configuration functions ***************************************/ -void RTC_WakeUpClockConfig(uint32_t RTC_WakeUpClock); -void RTC_SetWakeUpCounter(uint32_t RTC_WakeUpCounter); -uint32_t RTC_GetWakeUpCounter(void); -ErrorStatus RTC_WakeUpCmd(FunctionalState NewState); - -/* Daylight Saving configuration functions ************************************/ -void RTC_DayLightSavingConfig(uint32_t RTC_DayLightSaving, uint32_t RTC_StoreOperation); -uint32_t RTC_GetStoreOperation(void); - -/* Output pin Configuration function ******************************************/ -void RTC_OutputConfig(uint32_t RTC_Output, uint32_t RTC_OutputPolarity); - -/* Digital Calibration configuration functions *********************************/ -ErrorStatus RTC_CoarseCalibConfig(uint32_t RTC_CalibSign, uint32_t Value); -ErrorStatus RTC_CoarseCalibCmd(FunctionalState NewState); -void RTC_CalibOutputCmd(FunctionalState NewState); -void RTC_CalibOutputConfig(uint32_t RTC_CalibOutput); -ErrorStatus RTC_SmoothCalibConfig(uint32_t RTC_SmoothCalibPeriod, - uint32_t RTC_SmoothCalibPlusPulses, - uint32_t RTC_SmouthCalibMinusPulsesValue); - -/* TimeStamp configuration functions ******************************************/ -void RTC_TimeStampCmd(uint32_t RTC_TimeStampEdge, FunctionalState NewState); -void RTC_GetTimeStamp(uint32_t RTC_Format, RTC_TimeTypeDef* RTC_StampTimeStruct, - RTC_DateTypeDef* RTC_StampDateStruct); -uint32_t RTC_GetTimeStampSubSecond(void); - -/* Tampers configuration functions ********************************************/ -void RTC_TamperTriggerConfig(uint32_t RTC_Tamper, uint32_t RTC_TamperTrigger); -void RTC_TamperCmd(uint32_t RTC_Tamper, FunctionalState NewState); -void RTC_TamperFilterConfig(uint32_t RTC_TamperFilter); -void RTC_TamperSamplingFreqConfig(uint32_t RTC_TamperSamplingFreq); -void RTC_TamperPinsPrechargeDuration(uint32_t RTC_TamperPrechargeDuration); -void RTC_TimeStampOnTamperDetectionCmd(FunctionalState NewState); -void RTC_TamperPullUpCmd(FunctionalState NewState); - -/* Backup Data Registers configuration functions ******************************/ -void RTC_WriteBackupRegister(uint32_t RTC_BKP_DR, uint32_t Data); -uint32_t RTC_ReadBackupRegister(uint32_t RTC_BKP_DR); - -/* RTC Tamper and TimeStamp Pins Selection and Output Type Config configuration - functions ******************************************************************/ -void RTC_TamperPinSelection(uint32_t RTC_TamperPin); -void RTC_TimeStampPinSelection(uint32_t RTC_TimeStampPin); -void RTC_OutputTypeConfig(uint32_t RTC_OutputType); - -/* RTC_Shift_control_synchonisation_functions *********************************/ -ErrorStatus RTC_SynchroShiftConfig(uint32_t RTC_ShiftAdd1S, uint32_t RTC_ShiftSubFS); - -/* Interrupts and flags management functions **********************************/ -void RTC_ITConfig(uint32_t RTC_IT, FunctionalState NewState); -FlagStatus RTC_GetFlagStatus(uint32_t RTC_FLAG); -void RTC_ClearFlag(uint32_t RTC_FLAG); -ITStatus RTC_GetITStatus(uint32_t RTC_IT); -void RTC_ClearITPendingBit(uint32_t RTC_IT); - -#ifdef __cplusplus -} -#endif - -#endif /*__STM32F4xx_RTC_H */ - -/** - * @} - */ - -/** - * @} - */ - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/stm/lib/stm32f4xx_sdio.c b/stm/lib/stm32f4xx_sdio.c deleted file mode 100644 index aead846a1..000000000 --- a/stm/lib/stm32f4xx_sdio.c +++ /dev/null @@ -1,1011 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f4xx_sdio.c - * @author MCD Application Team - * @version V1.3.0 - * @date 08-November-2013 - * @brief This file provides firmware functions to manage the following - * functionalities of the Secure digital input/output interface (SDIO) - * peripheral: - * + Initialization and Configuration - * + Command path state machine (CPSM) management - * + Data path state machine (DPSM) management - * + SDIO IO Cards mode management - * + CE-ATA mode management - * + DMA transfers management - * + Interrupts and flags management - * -@verbatim - - =================================================================== - ##### How to use this driver ##### - =================================================================== - [..] - (#) The SDIO clock (SDIOCLK = 48 MHz) is coming from a specific output of PLL - (PLL48CLK). Before to start working with SDIO peripheral make sure that the - PLL is well configured. - The SDIO peripheral uses two clock signals: - (++) SDIO adapter clock (SDIOCLK = 48 MHz) - (++) APB2 bus clock (PCLK2) - - -@@- PCLK2 and SDIO_CK clock frequencies must respect the following condition: - Frequency(PCLK2) >= (3 / 8 x Frequency(SDIO_CK)) - - (#) Enable peripheral clock using RCC_APB2PeriphClockCmd(RCC_APB2Periph_SDIO, ENABLE). - - (#) According to the SDIO mode, enable the GPIO clocks using - RCC_AHB1PeriphClockCmd() function. - The I/O can be one of the following configurations: - (++) 1-bit data length: SDIO_CMD, SDIO_CK and D0. - (++) 4-bit data length: SDIO_CMD, SDIO_CK and D[3:0]. - (++) 8-bit data length: SDIO_CMD, SDIO_CK and D[7:0]. - - (#) Peripheral alternate function: - (++) Connect the pin to the desired peripherals' Alternate Function (AF) - using GPIO_PinAFConfig() function - (++) Configure the desired pin in alternate function by: - GPIO_InitStruct->GPIO_Mode = GPIO_Mode_AF - (++) Select the type, pull-up/pull-down and output speed via GPIO_PuPd, - GPIO_OType and GPIO_Speed members - (++) Call GPIO_Init() function - - (#) Program the Clock Edge, Clock Bypass, Clock Power Save, Bus Wide, - hardware, flow control and the Clock Divider using the SDIO_Init() - function. - - (#) Enable the Power ON State using the SDIO_SetPowerState(SDIO_PowerState_ON) - function. - - (#) Enable the clock using the SDIO_ClockCmd() function. - - (#) Enable the NVIC and the corresponding interrupt using the function - SDIO_ITConfig() if you need to use interrupt mode. - - (#) When using the DMA mode - (++) Configure the DMA using DMA_Init() function - (++) Active the needed channel Request using SDIO_DMACmd() function - - (#) Enable the DMA using the DMA_Cmd() function, when using DMA mode. - - (#) To control the CPSM (Command Path State Machine) and send - commands to the card use the SDIO_SendCommand(), - SDIO_GetCommandResponse() and SDIO_GetResponse() functions. First, user has - to fill the command structure (pointer to SDIO_CmdInitTypeDef) according - to the selected command to be sent. - The parameters that should be filled are: - (++) Command Argument - (++) Command Index - (++) Command Response type - (++) Command Wait - (++) CPSM Status (Enable or Disable). - - -@@- To check if the command is well received, read the SDIO_CMDRESP - register using the SDIO_GetCommandResponse(). - The SDIO responses registers (SDIO_RESP1 to SDIO_RESP2), use the - SDIO_GetResponse() function. - - (#) To control the DPSM (Data Path State Machine) and send/receive - data to/from the card use the SDIO_DataConfig(), SDIO_GetDataCounter(), - SDIO_ReadData(), SDIO_WriteData() and SDIO_GetFIFOCount() functions. - - *** Read Operations *** - ======================= - [..] - (#) First, user has to fill the data structure (pointer to - SDIO_DataInitTypeDef) according to the selected data type to be received. - The parameters that should be filled are: - (++) Data TimeOut - (++) Data Length - (++) Data Block size - (++) Data Transfer direction: should be from card (To SDIO) - (++) Data Transfer mode - (++) DPSM Status (Enable or Disable) - - (#) Configure the SDIO resources to receive the data from the card - according to selected transfer mode (Refer to Step 8, 9 and 10). - - (#) Send the selected Read command (refer to step 11). - - (#) Use the SDIO flags/interrupts to check the transfer status. - - *** Write Operations *** - ======================== - [..] - (#) First, user has to fill the data structure (pointer to - SDIO_DataInitTypeDef) according to the selected data type to be received. - The parameters that should be filled are: - (++) Data TimeOut - (++) Data Length - (++) Data Block size - (++) Data Transfer direction: should be to card (To CARD) - (++) Data Transfer mode - (++) DPSM Status (Enable or Disable) - - (#) Configure the SDIO resources to send the data to the card according to - selected transfer mode (Refer to Step 8, 9 and 10). - - (#) Send the selected Write command (refer to step 11). - - (#) Use the SDIO flags/interrupts to check the transfer status. - - -@endverbatim - * - * - ****************************************************************************** - * @attention - * - *

© COPYRIGHT 2013 STMicroelectronics

- * - * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License"); - * You may not use this file except in compliance with the License. - * You may obtain a copy of the License at: - * - * http://www.st.com/software_license_agreement_liberty_v2 - * - * Unless required by applicable law or agreed to in writing, software - * distributed under the License is distributed on an "AS IS" BASIS, - * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - * See the License for the specific language governing permissions and - * limitations under the License. - * - ****************************************************************************** - */ - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx_sdio.h" -#include "stm32f4xx_rcc.h" - -/** @addtogroup STM32F4xx_StdPeriph_Driver - * @{ - */ - -/** @defgroup SDIO - * @brief SDIO driver modules - * @{ - */ - -/* Private typedef -----------------------------------------------------------*/ -/* Private define ------------------------------------------------------------*/ - -/* ------------ SDIO registers bit address in the alias region ----------- */ -#define SDIO_OFFSET (SDIO_BASE - PERIPH_BASE) - -/* --- CLKCR Register ---*/ -/* Alias word address of CLKEN bit */ -#define CLKCR_OFFSET (SDIO_OFFSET + 0x04) -#define CLKEN_BitNumber 0x08 -#define CLKCR_CLKEN_BB (PERIPH_BB_BASE + (CLKCR_OFFSET * 32) + (CLKEN_BitNumber * 4)) - -/* --- CMD Register ---*/ -/* Alias word address of SDIOSUSPEND bit */ -#define CMD_OFFSET (SDIO_OFFSET + 0x0C) -#define SDIOSUSPEND_BitNumber 0x0B -#define CMD_SDIOSUSPEND_BB (PERIPH_BB_BASE + (CMD_OFFSET * 32) + (SDIOSUSPEND_BitNumber * 4)) - -/* Alias word address of ENCMDCOMPL bit */ -#define ENCMDCOMPL_BitNumber 0x0C -#define CMD_ENCMDCOMPL_BB (PERIPH_BB_BASE + (CMD_OFFSET * 32) + (ENCMDCOMPL_BitNumber * 4)) - -/* Alias word address of NIEN bit */ -#define NIEN_BitNumber 0x0D -#define CMD_NIEN_BB (PERIPH_BB_BASE + (CMD_OFFSET * 32) + (NIEN_BitNumber * 4)) - -/* Alias word address of ATACMD bit */ -#define ATACMD_BitNumber 0x0E -#define CMD_ATACMD_BB (PERIPH_BB_BASE + (CMD_OFFSET * 32) + (ATACMD_BitNumber * 4)) - -/* --- DCTRL Register ---*/ -/* Alias word address of DMAEN bit */ -#define DCTRL_OFFSET (SDIO_OFFSET + 0x2C) -#define DMAEN_BitNumber 0x03 -#define DCTRL_DMAEN_BB (PERIPH_BB_BASE + (DCTRL_OFFSET * 32) + (DMAEN_BitNumber * 4)) - -/* Alias word address of RWSTART bit */ -#define RWSTART_BitNumber 0x08 -#define DCTRL_RWSTART_BB (PERIPH_BB_BASE + (DCTRL_OFFSET * 32) + (RWSTART_BitNumber * 4)) - -/* Alias word address of RWSTOP bit */ -#define RWSTOP_BitNumber 0x09 -#define DCTRL_RWSTOP_BB (PERIPH_BB_BASE + (DCTRL_OFFSET * 32) + (RWSTOP_BitNumber * 4)) - -/* Alias word address of RWMOD bit */ -#define RWMOD_BitNumber 0x0A -#define DCTRL_RWMOD_BB (PERIPH_BB_BASE + (DCTRL_OFFSET * 32) + (RWMOD_BitNumber * 4)) - -/* Alias word address of SDIOEN bit */ -#define SDIOEN_BitNumber 0x0B -#define DCTRL_SDIOEN_BB (PERIPH_BB_BASE + (DCTRL_OFFSET * 32) + (SDIOEN_BitNumber * 4)) - -/* ---------------------- SDIO registers bit mask ------------------------ */ -/* --- CLKCR Register ---*/ -/* CLKCR register clear mask */ -#define CLKCR_CLEAR_MASK ((uint32_t)0xFFFF8100) - -/* --- PWRCTRL Register ---*/ -/* SDIO PWRCTRL Mask */ -#define PWR_PWRCTRL_MASK ((uint32_t)0xFFFFFFFC) - -/* --- DCTRL Register ---*/ -/* SDIO DCTRL Clear Mask */ -#define DCTRL_CLEAR_MASK ((uint32_t)0xFFFFFF08) - -/* --- CMD Register ---*/ -/* CMD Register clear mask */ -#define CMD_CLEAR_MASK ((uint32_t)0xFFFFF800) - -/* SDIO RESP Registers Address */ -#define SDIO_RESP_ADDR ((uint32_t)(SDIO_BASE + 0x14)) - -/* Private macro -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -/* Private function prototypes -----------------------------------------------*/ -/* Private functions ---------------------------------------------------------*/ - -/** @defgroup SDIO_Private_Functions - * @{ - */ - -/** @defgroup SDIO_Group1 Initialization and Configuration functions - * @brief Initialization and Configuration functions - * -@verbatim - =============================================================================== - ##### Initialization and Configuration functions ##### - =============================================================================== - -@endverbatim - * @{ - */ - -/** - * @brief Deinitializes the SDIO peripheral registers to their default reset values. - * @param None - * @retval None - */ -void SDIO_DeInit(void) -{ - RCC_APB2PeriphResetCmd(RCC_APB2Periph_SDIO, ENABLE); - RCC_APB2PeriphResetCmd(RCC_APB2Periph_SDIO, DISABLE); -} - -/** - * @brief Initializes the SDIO peripheral according to the specified - * parameters in the SDIO_InitStruct. - * @param SDIO_InitStruct : pointer to a SDIO_InitTypeDef structure - * that contains the configuration information for the SDIO peripheral. - * @retval None - */ -void SDIO_Init(SDIO_InitTypeDef* SDIO_InitStruct) -{ - uint32_t tmpreg = 0; - - /* Check the parameters */ - assert_param(IS_SDIO_CLOCK_EDGE(SDIO_InitStruct->SDIO_ClockEdge)); - assert_param(IS_SDIO_CLOCK_BYPASS(SDIO_InitStruct->SDIO_ClockBypass)); - assert_param(IS_SDIO_CLOCK_POWER_SAVE(SDIO_InitStruct->SDIO_ClockPowerSave)); - assert_param(IS_SDIO_BUS_WIDE(SDIO_InitStruct->SDIO_BusWide)); - assert_param(IS_SDIO_HARDWARE_FLOW_CONTROL(SDIO_InitStruct->SDIO_HardwareFlowControl)); - -/*---------------------------- SDIO CLKCR Configuration ------------------------*/ - /* Get the SDIO CLKCR value */ - tmpreg = SDIO->CLKCR; - - /* Clear CLKDIV, PWRSAV, BYPASS, WIDBUS, NEGEDGE, HWFC_EN bits */ - tmpreg &= CLKCR_CLEAR_MASK; - - /* Set CLKDIV bits according to SDIO_ClockDiv value */ - /* Set PWRSAV bit according to SDIO_ClockPowerSave value */ - /* Set BYPASS bit according to SDIO_ClockBypass value */ - /* Set WIDBUS bits according to SDIO_BusWide value */ - /* Set NEGEDGE bits according to SDIO_ClockEdge value */ - /* Set HWFC_EN bits according to SDIO_HardwareFlowControl value */ - tmpreg |= (SDIO_InitStruct->SDIO_ClockDiv | SDIO_InitStruct->SDIO_ClockPowerSave | - SDIO_InitStruct->SDIO_ClockBypass | SDIO_InitStruct->SDIO_BusWide | - SDIO_InitStruct->SDIO_ClockEdge | SDIO_InitStruct->SDIO_HardwareFlowControl); - - /* Write to SDIO CLKCR */ - SDIO->CLKCR = tmpreg; -} - -/** - * @brief Fills each SDIO_InitStruct member with its default value. - * @param SDIO_InitStruct: pointer to an SDIO_InitTypeDef structure which - * will be initialized. - * @retval None - */ -void SDIO_StructInit(SDIO_InitTypeDef* SDIO_InitStruct) -{ - /* SDIO_InitStruct members default value */ - SDIO_InitStruct->SDIO_ClockDiv = 0x00; - SDIO_InitStruct->SDIO_ClockEdge = SDIO_ClockEdge_Rising; - SDIO_InitStruct->SDIO_ClockBypass = SDIO_ClockBypass_Disable; - SDIO_InitStruct->SDIO_ClockPowerSave = SDIO_ClockPowerSave_Disable; - SDIO_InitStruct->SDIO_BusWide = SDIO_BusWide_1b; - SDIO_InitStruct->SDIO_HardwareFlowControl = SDIO_HardwareFlowControl_Disable; -} - -/** - * @brief Enables or disables the SDIO Clock. - * @param NewState: new state of the SDIO Clock. - * This parameter can be: ENABLE or DISABLE. - * @retval None - */ -void SDIO_ClockCmd(FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_FUNCTIONAL_STATE(NewState)); - - *(__IO uint32_t *) CLKCR_CLKEN_BB = (uint32_t)NewState; -} - -/** - * @brief Sets the power status of the controller. - * @param SDIO_PowerState: new state of the Power state. - * This parameter can be one of the following values: - * @arg SDIO_PowerState_OFF: SDIO Power OFF - * @arg SDIO_PowerState_ON: SDIO Power ON - * @retval None - */ -void SDIO_SetPowerState(uint32_t SDIO_PowerState) -{ - /* Check the parameters */ - assert_param(IS_SDIO_POWER_STATE(SDIO_PowerState)); - - SDIO->POWER = SDIO_PowerState; -} - -/** - * @brief Gets the power status of the controller. - * @param None - * @retval Power status of the controller. The returned value can be one of the - * following values: - * - 0x00: Power OFF - * - 0x02: Power UP - * - 0x03: Power ON - */ -uint32_t SDIO_GetPowerState(void) -{ - return (SDIO->POWER & (~PWR_PWRCTRL_MASK)); -} - -/** - * @} - */ - -/** @defgroup SDIO_Group2 Command path state machine (CPSM) management functions - * @brief Command path state machine (CPSM) management functions - * -@verbatim - =============================================================================== - ##### Command path state machine (CPSM) management functions ##### - =============================================================================== - - This section provide functions allowing to program and read the Command path - state machine (CPSM). - -@endverbatim - * @{ - */ - -/** - * @brief Initializes the SDIO Command according to the specified - * parameters in the SDIO_CmdInitStruct and send the command. - * @param SDIO_CmdInitStruct : pointer to a SDIO_CmdInitTypeDef - * structure that contains the configuration information for the SDIO - * command. - * @retval None - */ -void SDIO_SendCommand(SDIO_CmdInitTypeDef *SDIO_CmdInitStruct) -{ - uint32_t tmpreg = 0; - - /* Check the parameters */ - assert_param(IS_SDIO_CMD_INDEX(SDIO_CmdInitStruct->SDIO_CmdIndex)); - assert_param(IS_SDIO_RESPONSE(SDIO_CmdInitStruct->SDIO_Response)); - assert_param(IS_SDIO_WAIT(SDIO_CmdInitStruct->SDIO_Wait)); - assert_param(IS_SDIO_CPSM(SDIO_CmdInitStruct->SDIO_CPSM)); - -/*---------------------------- SDIO ARG Configuration ------------------------*/ - /* Set the SDIO Argument value */ - SDIO->ARG = SDIO_CmdInitStruct->SDIO_Argument; - -/*---------------------------- SDIO CMD Configuration ------------------------*/ - /* Get the SDIO CMD value */ - tmpreg = SDIO->CMD; - /* Clear CMDINDEX, WAITRESP, WAITINT, WAITPEND, CPSMEN bits */ - tmpreg &= CMD_CLEAR_MASK; - /* Set CMDINDEX bits according to SDIO_CmdIndex value */ - /* Set WAITRESP bits according to SDIO_Response value */ - /* Set WAITINT and WAITPEND bits according to SDIO_Wait value */ - /* Set CPSMEN bits according to SDIO_CPSM value */ - tmpreg |= (uint32_t)SDIO_CmdInitStruct->SDIO_CmdIndex | SDIO_CmdInitStruct->SDIO_Response - | SDIO_CmdInitStruct->SDIO_Wait | SDIO_CmdInitStruct->SDIO_CPSM; - - /* Write to SDIO CMD */ - SDIO->CMD = tmpreg; -} - -/** - * @brief Fills each SDIO_CmdInitStruct member with its default value. - * @param SDIO_CmdInitStruct: pointer to an SDIO_CmdInitTypeDef - * structure which will be initialized. - * @retval None - */ -void SDIO_CmdStructInit(SDIO_CmdInitTypeDef* SDIO_CmdInitStruct) -{ - /* SDIO_CmdInitStruct members default value */ - SDIO_CmdInitStruct->SDIO_Argument = 0x00; - SDIO_CmdInitStruct->SDIO_CmdIndex = 0x00; - SDIO_CmdInitStruct->SDIO_Response = SDIO_Response_No; - SDIO_CmdInitStruct->SDIO_Wait = SDIO_Wait_No; - SDIO_CmdInitStruct->SDIO_CPSM = SDIO_CPSM_Disable; -} - -/** - * @brief Returns command index of last command for which response received. - * @param None - * @retval Returns the command index of the last command response received. - */ -uint8_t SDIO_GetCommandResponse(void) -{ - return (uint8_t)(SDIO->RESPCMD); -} - -/** - * @brief Returns response received from the card for the last command. - * @param SDIO_RESP: Specifies the SDIO response register. - * This parameter can be one of the following values: - * @arg SDIO_RESP1: Response Register 1 - * @arg SDIO_RESP2: Response Register 2 - * @arg SDIO_RESP3: Response Register 3 - * @arg SDIO_RESP4: Response Register 4 - * @retval The Corresponding response register value. - */ -uint32_t SDIO_GetResponse(uint32_t SDIO_RESP) -{ - __IO uint32_t tmp = 0; - - /* Check the parameters */ - assert_param(IS_SDIO_RESP(SDIO_RESP)); - - tmp = SDIO_RESP_ADDR + SDIO_RESP; - - return (*(__IO uint32_t *) tmp); -} - -/** - * @} - */ - -/** @defgroup SDIO_Group3 Data path state machine (DPSM) management functions - * @brief Data path state machine (DPSM) management functions - * -@verbatim - =============================================================================== - ##### Data path state machine (DPSM) management functions ##### - =============================================================================== - - This section provide functions allowing to program and read the Data path - state machine (DPSM). - -@endverbatim - * @{ - */ - -/** - * @brief Initializes the SDIO data path according to the specified - * parameters in the SDIO_DataInitStruct. - * @param SDIO_DataInitStruct : pointer to a SDIO_DataInitTypeDef structure - * that contains the configuration information for the SDIO command. - * @retval None - */ -void SDIO_DataConfig(SDIO_DataInitTypeDef* SDIO_DataInitStruct) -{ - uint32_t tmpreg = 0; - - /* Check the parameters */ - assert_param(IS_SDIO_DATA_LENGTH(SDIO_DataInitStruct->SDIO_DataLength)); - assert_param(IS_SDIO_BLOCK_SIZE(SDIO_DataInitStruct->SDIO_DataBlockSize)); - assert_param(IS_SDIO_TRANSFER_DIR(SDIO_DataInitStruct->SDIO_TransferDir)); - assert_param(IS_SDIO_TRANSFER_MODE(SDIO_DataInitStruct->SDIO_TransferMode)); - assert_param(IS_SDIO_DPSM(SDIO_DataInitStruct->SDIO_DPSM)); - -/*---------------------------- SDIO DTIMER Configuration ---------------------*/ - /* Set the SDIO Data TimeOut value */ - SDIO->DTIMER = SDIO_DataInitStruct->SDIO_DataTimeOut; - -/*---------------------------- SDIO DLEN Configuration -----------------------*/ - /* Set the SDIO DataLength value */ - SDIO->DLEN = SDIO_DataInitStruct->SDIO_DataLength; - -/*---------------------------- SDIO DCTRL Configuration ----------------------*/ - /* Get the SDIO DCTRL value */ - tmpreg = SDIO->DCTRL; - /* Clear DEN, DTMODE, DTDIR and DBCKSIZE bits */ - tmpreg &= DCTRL_CLEAR_MASK; - /* Set DEN bit according to SDIO_DPSM value */ - /* Set DTMODE bit according to SDIO_TransferMode value */ - /* Set DTDIR bit according to SDIO_TransferDir value */ - /* Set DBCKSIZE bits according to SDIO_DataBlockSize value */ - tmpreg |= (uint32_t)SDIO_DataInitStruct->SDIO_DataBlockSize | SDIO_DataInitStruct->SDIO_TransferDir - | SDIO_DataInitStruct->SDIO_TransferMode | SDIO_DataInitStruct->SDIO_DPSM; - - /* Write to SDIO DCTRL */ - SDIO->DCTRL = tmpreg; -} - -/** - * @brief Fills each SDIO_DataInitStruct member with its default value. - * @param SDIO_DataInitStruct: pointer to an SDIO_DataInitTypeDef structure - * which will be initialized. - * @retval None - */ -void SDIO_DataStructInit(SDIO_DataInitTypeDef* SDIO_DataInitStruct) -{ - /* SDIO_DataInitStruct members default value */ - SDIO_DataInitStruct->SDIO_DataTimeOut = 0xFFFFFFFF; - SDIO_DataInitStruct->SDIO_DataLength = 0x00; - SDIO_DataInitStruct->SDIO_DataBlockSize = SDIO_DataBlockSize_1b; - SDIO_DataInitStruct->SDIO_TransferDir = SDIO_TransferDir_ToCard; - SDIO_DataInitStruct->SDIO_TransferMode = SDIO_TransferMode_Block; - SDIO_DataInitStruct->SDIO_DPSM = SDIO_DPSM_Disable; -} - -/** - * @brief Returns number of remaining data bytes to be transferred. - * @param None - * @retval Number of remaining data bytes to be transferred - */ -uint32_t SDIO_GetDataCounter(void) -{ - return SDIO->DCOUNT; -} - -/** - * @brief Read one data word from Rx FIFO. - * @param None - * @retval Data received - */ -uint32_t SDIO_ReadData(void) -{ - return SDIO->FIFO; -} - -/** - * @brief Write one data word to Tx FIFO. - * @param Data: 32-bit data word to write. - * @retval None - */ -void SDIO_WriteData(uint32_t Data) -{ - SDIO->FIFO = Data; -} - -/** - * @brief Returns the number of words left to be written to or read from FIFO. - * @param None - * @retval Remaining number of words. - */ -uint32_t SDIO_GetFIFOCount(void) -{ - return SDIO->FIFOCNT; -} - -/** - * @} - */ - -/** @defgroup SDIO_Group4 SDIO IO Cards mode management functions - * @brief SDIO IO Cards mode management functions - * -@verbatim - =============================================================================== - ##### SDIO IO Cards mode management functions ##### - =============================================================================== - - This section provide functions allowing to program and read the SDIO IO Cards. - -@endverbatim - * @{ - */ - -/** - * @brief Starts the SD I/O Read Wait operation. - * @param NewState: new state of the Start SDIO Read Wait operation. - * This parameter can be: ENABLE or DISABLE. - * @retval None - */ -void SDIO_StartSDIOReadWait(FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_FUNCTIONAL_STATE(NewState)); - - *(__IO uint32_t *) DCTRL_RWSTART_BB = (uint32_t) NewState; -} - -/** - * @brief Stops the SD I/O Read Wait operation. - * @param NewState: new state of the Stop SDIO Read Wait operation. - * This parameter can be: ENABLE or DISABLE. - * @retval None - */ -void SDIO_StopSDIOReadWait(FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_FUNCTIONAL_STATE(NewState)); - - *(__IO uint32_t *) DCTRL_RWSTOP_BB = (uint32_t) NewState; -} - -/** - * @brief Sets one of the two options of inserting read wait interval. - * @param SDIO_ReadWaitMode: SD I/O Read Wait operation mode. - * This parameter can be: - * @arg SDIO_ReadWaitMode_CLK: Read Wait control by stopping SDIOCLK - * @arg SDIO_ReadWaitMode_DATA2: Read Wait control using SDIO_DATA2 - * @retval None - */ -void SDIO_SetSDIOReadWaitMode(uint32_t SDIO_ReadWaitMode) -{ - /* Check the parameters */ - assert_param(IS_SDIO_READWAIT_MODE(SDIO_ReadWaitMode)); - - *(__IO uint32_t *) DCTRL_RWMOD_BB = SDIO_ReadWaitMode; -} - -/** - * @brief Enables or disables the SD I/O Mode Operation. - * @param NewState: new state of SDIO specific operation. - * This parameter can be: ENABLE or DISABLE. - * @retval None - */ -void SDIO_SetSDIOOperation(FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_FUNCTIONAL_STATE(NewState)); - - *(__IO uint32_t *) DCTRL_SDIOEN_BB = (uint32_t)NewState; -} - -/** - * @brief Enables or disables the SD I/O Mode suspend command sending. - * @param NewState: new state of the SD I/O Mode suspend command. - * This parameter can be: ENABLE or DISABLE. - * @retval None - */ -void SDIO_SendSDIOSuspendCmd(FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_FUNCTIONAL_STATE(NewState)); - - *(__IO uint32_t *) CMD_SDIOSUSPEND_BB = (uint32_t)NewState; -} - -/** - * @} - */ - -/** @defgroup SDIO_Group5 CE-ATA mode management functions - * @brief CE-ATA mode management functions - * -@verbatim - =============================================================================== - ##### CE-ATA mode management functions ##### - =============================================================================== - - This section provide functions allowing to program and read the CE-ATA card. - -@endverbatim - * @{ - */ - -/** - * @brief Enables or disables the command completion signal. - * @param NewState: new state of command completion signal. - * This parameter can be: ENABLE or DISABLE. - * @retval None - */ -void SDIO_CommandCompletionCmd(FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_FUNCTIONAL_STATE(NewState)); - - *(__IO uint32_t *) CMD_ENCMDCOMPL_BB = (uint32_t)NewState; -} - -/** - * @brief Enables or disables the CE-ATA interrupt. - * @param NewState: new state of CE-ATA interrupt. - * This parameter can be: ENABLE or DISABLE. - * @retval None - */ -void SDIO_CEATAITCmd(FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_FUNCTIONAL_STATE(NewState)); - - *(__IO uint32_t *) CMD_NIEN_BB = (uint32_t)((~((uint32_t)NewState)) & ((uint32_t)0x1)); -} - -/** - * @brief Sends CE-ATA command (CMD61). - * @param NewState: new state of CE-ATA command. - * This parameter can be: ENABLE or DISABLE. - * @retval None - */ -void SDIO_SendCEATACmd(FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_FUNCTIONAL_STATE(NewState)); - - *(__IO uint32_t *) CMD_ATACMD_BB = (uint32_t)NewState; -} - -/** - * @} - */ - -/** @defgroup SDIO_Group6 DMA transfers management functions - * @brief DMA transfers management functions - * -@verbatim - =============================================================================== - ##### DMA transfers management functions ##### - =============================================================================== - - This section provide functions allowing to program SDIO DMA transfer. - -@endverbatim - * @{ - */ - -/** - * @brief Enables or disables the SDIO DMA request. - * @param NewState: new state of the selected SDIO DMA request. - * This parameter can be: ENABLE or DISABLE. - * @retval None - */ -void SDIO_DMACmd(FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_FUNCTIONAL_STATE(NewState)); - - *(__IO uint32_t *) DCTRL_DMAEN_BB = (uint32_t)NewState; -} - -/** - * @} - */ - -/** @defgroup SDIO_Group7 Interrupts and flags management functions - * @brief Interrupts and flags management functions - * -@verbatim - =============================================================================== - ##### Interrupts and flags management functions ##### - =============================================================================== - - -@endverbatim - * @{ - */ - -/** - * @brief Enables or disables the SDIO interrupts. - * @param SDIO_IT: specifies the SDIO interrupt sources to be enabled or disabled. - * This parameter can be one or a combination of the following values: - * @arg SDIO_IT_CCRCFAIL: Command response received (CRC check failed) interrupt - * @arg SDIO_IT_DCRCFAIL: Data block sent/received (CRC check failed) interrupt - * @arg SDIO_IT_CTIMEOUT: Command response timeout interrupt - * @arg SDIO_IT_DTIMEOUT: Data timeout interrupt - * @arg SDIO_IT_TXUNDERR: Transmit FIFO underrun error interrupt - * @arg SDIO_IT_RXOVERR: Received FIFO overrun error interrupt - * @arg SDIO_IT_CMDREND: Command response received (CRC check passed) interrupt - * @arg SDIO_IT_CMDSENT: Command sent (no response required) interrupt - * @arg SDIO_IT_DATAEND: Data end (data counter, SDIDCOUNT, is zero) interrupt - * @arg SDIO_IT_STBITERR: Start bit not detected on all data signals in wide - * bus mode interrupt - * @arg SDIO_IT_DBCKEND: Data block sent/received (CRC check passed) interrupt - * @arg SDIO_IT_CMDACT: Command transfer in progress interrupt - * @arg SDIO_IT_TXACT: Data transmit in progress interrupt - * @arg SDIO_IT_RXACT: Data receive in progress interrupt - * @arg SDIO_IT_TXFIFOHE: Transmit FIFO Half Empty interrupt - * @arg SDIO_IT_RXFIFOHF: Receive FIFO Half Full interrupt - * @arg SDIO_IT_TXFIFOF: Transmit FIFO full interrupt - * @arg SDIO_IT_RXFIFOF: Receive FIFO full interrupt - * @arg SDIO_IT_TXFIFOE: Transmit FIFO empty interrupt - * @arg SDIO_IT_RXFIFOE: Receive FIFO empty interrupt - * @arg SDIO_IT_TXDAVL: Data available in transmit FIFO interrupt - * @arg SDIO_IT_RXDAVL: Data available in receive FIFO interrupt - * @arg SDIO_IT_SDIOIT: SD I/O interrupt received interrupt - * @arg SDIO_IT_CEATAEND: CE-ATA command completion signal received for CMD61 interrupt - * @param NewState: new state of the specified SDIO interrupts. - * This parameter can be: ENABLE or DISABLE. - * @retval None - */ -void SDIO_ITConfig(uint32_t SDIO_IT, FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_SDIO_IT(SDIO_IT)); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - - if (NewState != DISABLE) - { - /* Enable the SDIO interrupts */ - SDIO->MASK |= SDIO_IT; - } - else - { - /* Disable the SDIO interrupts */ - SDIO->MASK &= ~SDIO_IT; - } -} - -/** - * @brief Checks whether the specified SDIO flag is set or not. - * @param SDIO_FLAG: specifies the flag to check. - * This parameter can be one of the following values: - * @arg SDIO_FLAG_CCRCFAIL: Command response received (CRC check failed) - * @arg SDIO_FLAG_DCRCFAIL: Data block sent/received (CRC check failed) - * @arg SDIO_FLAG_CTIMEOUT: Command response timeout - * @arg SDIO_FLAG_DTIMEOUT: Data timeout - * @arg SDIO_FLAG_TXUNDERR: Transmit FIFO underrun error - * @arg SDIO_FLAG_RXOVERR: Received FIFO overrun error - * @arg SDIO_FLAG_CMDREND: Command response received (CRC check passed) - * @arg SDIO_FLAG_CMDSENT: Command sent (no response required) - * @arg SDIO_FLAG_DATAEND: Data end (data counter, SDIDCOUNT, is zero) - * @arg SDIO_FLAG_STBITERR: Start bit not detected on all data signals in wide bus mode. - * @arg SDIO_FLAG_DBCKEND: Data block sent/received (CRC check passed) - * @arg SDIO_FLAG_CMDACT: Command transfer in progress - * @arg SDIO_FLAG_TXACT: Data transmit in progress - * @arg SDIO_FLAG_RXACT: Data receive in progress - * @arg SDIO_FLAG_TXFIFOHE: Transmit FIFO Half Empty - * @arg SDIO_FLAG_RXFIFOHF: Receive FIFO Half Full - * @arg SDIO_FLAG_TXFIFOF: Transmit FIFO full - * @arg SDIO_FLAG_RXFIFOF: Receive FIFO full - * @arg SDIO_FLAG_TXFIFOE: Transmit FIFO empty - * @arg SDIO_FLAG_RXFIFOE: Receive FIFO empty - * @arg SDIO_FLAG_TXDAVL: Data available in transmit FIFO - * @arg SDIO_FLAG_RXDAVL: Data available in receive FIFO - * @arg SDIO_FLAG_SDIOIT: SD I/O interrupt received - * @arg SDIO_FLAG_CEATAEND: CE-ATA command completion signal received for CMD61 - * @retval The new state of SDIO_FLAG (SET or RESET). - */ -FlagStatus SDIO_GetFlagStatus(uint32_t SDIO_FLAG) -{ - FlagStatus bitstatus = RESET; - - /* Check the parameters */ - assert_param(IS_SDIO_FLAG(SDIO_FLAG)); - - if ((SDIO->STA & SDIO_FLAG) != (uint32_t)RESET) - { - bitstatus = SET; - } - else - { - bitstatus = RESET; - } - return bitstatus; -} - -/** - * @brief Clears the SDIO's pending flags. - * @param SDIO_FLAG: specifies the flag to clear. - * This parameter can be one or a combination of the following values: - * @arg SDIO_FLAG_CCRCFAIL: Command response received (CRC check failed) - * @arg SDIO_FLAG_DCRCFAIL: Data block sent/received (CRC check failed) - * @arg SDIO_FLAG_CTIMEOUT: Command response timeout - * @arg SDIO_FLAG_DTIMEOUT: Data timeout - * @arg SDIO_FLAG_TXUNDERR: Transmit FIFO underrun error - * @arg SDIO_FLAG_RXOVERR: Received FIFO overrun error - * @arg SDIO_FLAG_CMDREND: Command response received (CRC check passed) - * @arg SDIO_FLAG_CMDSENT: Command sent (no response required) - * @arg SDIO_FLAG_DATAEND: Data end (data counter, SDIDCOUNT, is zero) - * @arg SDIO_FLAG_STBITERR: Start bit not detected on all data signals in wide bus mode - * @arg SDIO_FLAG_DBCKEND: Data block sent/received (CRC check passed) - * @arg SDIO_FLAG_SDIOIT: SD I/O interrupt received - * @arg SDIO_FLAG_CEATAEND: CE-ATA command completion signal received for CMD61 - * @retval None - */ -void SDIO_ClearFlag(uint32_t SDIO_FLAG) -{ - /* Check the parameters */ - assert_param(IS_SDIO_CLEAR_FLAG(SDIO_FLAG)); - - SDIO->ICR = SDIO_FLAG; -} - -/** - * @brief Checks whether the specified SDIO interrupt has occurred or not. - * @param SDIO_IT: specifies the SDIO interrupt source to check. - * This parameter can be one of the following values: - * @arg SDIO_IT_CCRCFAIL: Command response received (CRC check failed) interrupt - * @arg SDIO_IT_DCRCFAIL: Data block sent/received (CRC check failed) interrupt - * @arg SDIO_IT_CTIMEOUT: Command response timeout interrupt - * @arg SDIO_IT_DTIMEOUT: Data timeout interrupt - * @arg SDIO_IT_TXUNDERR: Transmit FIFO underrun error interrupt - * @arg SDIO_IT_RXOVERR: Received FIFO overrun error interrupt - * @arg SDIO_IT_CMDREND: Command response received (CRC check passed) interrupt - * @arg SDIO_IT_CMDSENT: Command sent (no response required) interrupt - * @arg SDIO_IT_DATAEND: Data end (data counter, SDIDCOUNT, is zero) interrupt - * @arg SDIO_IT_STBITERR: Start bit not detected on all data signals in wide - * bus mode interrupt - * @arg SDIO_IT_DBCKEND: Data block sent/received (CRC check passed) interrupt - * @arg SDIO_IT_CMDACT: Command transfer in progress interrupt - * @arg SDIO_IT_TXACT: Data transmit in progress interrupt - * @arg SDIO_IT_RXACT: Data receive in progress interrupt - * @arg SDIO_IT_TXFIFOHE: Transmit FIFO Half Empty interrupt - * @arg SDIO_IT_RXFIFOHF: Receive FIFO Half Full interrupt - * @arg SDIO_IT_TXFIFOF: Transmit FIFO full interrupt - * @arg SDIO_IT_RXFIFOF: Receive FIFO full interrupt - * @arg SDIO_IT_TXFIFOE: Transmit FIFO empty interrupt - * @arg SDIO_IT_RXFIFOE: Receive FIFO empty interrupt - * @arg SDIO_IT_TXDAVL: Data available in transmit FIFO interrupt - * @arg SDIO_IT_RXDAVL: Data available in receive FIFO interrupt - * @arg SDIO_IT_SDIOIT: SD I/O interrupt received interrupt - * @arg SDIO_IT_CEATAEND: CE-ATA command completion signal received for CMD61 interrupt - * @retval The new state of SDIO_IT (SET or RESET). - */ -ITStatus SDIO_GetITStatus(uint32_t SDIO_IT) -{ - ITStatus bitstatus = RESET; - - /* Check the parameters */ - assert_param(IS_SDIO_GET_IT(SDIO_IT)); - if ((SDIO->STA & SDIO_IT) != (uint32_t)RESET) - { - bitstatus = SET; - } - else - { - bitstatus = RESET; - } - return bitstatus; -} - -/** - * @brief Clears the SDIO's interrupt pending bits. - * @param SDIO_IT: specifies the interrupt pending bit to clear. - * This parameter can be one or a combination of the following values: - * @arg SDIO_IT_CCRCFAIL: Command response received (CRC check failed) interrupt - * @arg SDIO_IT_DCRCFAIL: Data block sent/received (CRC check failed) interrupt - * @arg SDIO_IT_CTIMEOUT: Command response timeout interrupt - * @arg SDIO_IT_DTIMEOUT: Data timeout interrupt - * @arg SDIO_IT_TXUNDERR: Transmit FIFO underrun error interrupt - * @arg SDIO_IT_RXOVERR: Received FIFO overrun error interrupt - * @arg SDIO_IT_CMDREND: Command response received (CRC check passed) interrupt - * @arg SDIO_IT_CMDSENT: Command sent (no response required) interrupt - * @arg SDIO_IT_DATAEND: Data end (data counter, SDIO_DCOUNT, is zero) interrupt - * @arg SDIO_IT_STBITERR: Start bit not detected on all data signals in wide - * bus mode interrupt - * @arg SDIO_IT_SDIOIT: SD I/O interrupt received interrupt - * @arg SDIO_IT_CEATAEND: CE-ATA command completion signal received for CMD61 - * @retval None - */ -void SDIO_ClearITPendingBit(uint32_t SDIO_IT) -{ - /* Check the parameters */ - assert_param(IS_SDIO_CLEAR_IT(SDIO_IT)); - - SDIO->ICR = SDIO_IT; -} - -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/stm/lib/stm32f4xx_sdio.h b/stm/lib/stm32f4xx_sdio.h deleted file mode 100644 index 05e0afa3c..000000000 --- a/stm/lib/stm32f4xx_sdio.h +++ /dev/null @@ -1,536 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f4xx_sdio.h - * @author MCD Application Team - * @version V1.3.0 - * @date 08-November-2013 - * @brief This file contains all the functions prototypes for the SDIO firmware - * library. - ****************************************************************************** - * @attention - * - *

© COPYRIGHT 2013 STMicroelectronics

- * - * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License"); - * You may not use this file except in compliance with the License. - * You may obtain a copy of the License at: - * - * http://www.st.com/software_license_agreement_liberty_v2 - * - * Unless required by applicable law or agreed to in writing, software - * distributed under the License is distributed on an "AS IS" BASIS, - * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - * See the License for the specific language governing permissions and - * limitations under the License. - * - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F4xx_SDIO_H -#define __STM32F4xx_SDIO_H - -#ifdef __cplusplus - extern "C" { -#endif - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx.h" - -/** @addtogroup STM32F4xx_StdPeriph_Driver - * @{ - */ - -/** @addtogroup SDIO - * @{ - */ - -/* Exported types ------------------------------------------------------------*/ - -typedef struct -{ - uint32_t SDIO_ClockEdge; /*!< Specifies the clock transition on which the bit capture is made. - This parameter can be a value of @ref SDIO_Clock_Edge */ - - uint32_t SDIO_ClockBypass; /*!< Specifies whether the SDIO Clock divider bypass is - enabled or disabled. - This parameter can be a value of @ref SDIO_Clock_Bypass */ - - uint32_t SDIO_ClockPowerSave; /*!< Specifies whether SDIO Clock output is enabled or - disabled when the bus is idle. - This parameter can be a value of @ref SDIO_Clock_Power_Save */ - - uint32_t SDIO_BusWide; /*!< Specifies the SDIO bus width. - This parameter can be a value of @ref SDIO_Bus_Wide */ - - uint32_t SDIO_HardwareFlowControl; /*!< Specifies whether the SDIO hardware flow control is enabled or disabled. - This parameter can be a value of @ref SDIO_Hardware_Flow_Control */ - - uint8_t SDIO_ClockDiv; /*!< Specifies the clock frequency of the SDIO controller. - This parameter can be a value between 0x00 and 0xFF. */ - -} SDIO_InitTypeDef; - -typedef struct -{ - uint32_t SDIO_Argument; /*!< Specifies the SDIO command argument which is sent - to a card as part of a command message. If a command - contains an argument, it must be loaded into this register - before writing the command to the command register */ - - uint32_t SDIO_CmdIndex; /*!< Specifies the SDIO command index. It must be lower than 0x40. */ - - uint32_t SDIO_Response; /*!< Specifies the SDIO response type. - This parameter can be a value of @ref SDIO_Response_Type */ - - uint32_t SDIO_Wait; /*!< Specifies whether SDIO wait for interrupt request is enabled or disabled. - This parameter can be a value of @ref SDIO_Wait_Interrupt_State */ - - uint32_t SDIO_CPSM; /*!< Specifies whether SDIO Command path state machine (CPSM) - is enabled or disabled. - This parameter can be a value of @ref SDIO_CPSM_State */ -} SDIO_CmdInitTypeDef; - -typedef struct -{ - uint32_t SDIO_DataTimeOut; /*!< Specifies the data timeout period in card bus clock periods. */ - - uint32_t SDIO_DataLength; /*!< Specifies the number of data bytes to be transferred. */ - - uint32_t SDIO_DataBlockSize; /*!< Specifies the data block size for block transfer. - This parameter can be a value of @ref SDIO_Data_Block_Size */ - - uint32_t SDIO_TransferDir; /*!< Specifies the data transfer direction, whether the transfer - is a read or write. - This parameter can be a value of @ref SDIO_Transfer_Direction */ - - uint32_t SDIO_TransferMode; /*!< Specifies whether data transfer is in stream or block mode. - This parameter can be a value of @ref SDIO_Transfer_Type */ - - uint32_t SDIO_DPSM; /*!< Specifies whether SDIO Data path state machine (DPSM) - is enabled or disabled. - This parameter can be a value of @ref SDIO_DPSM_State */ -} SDIO_DataInitTypeDef; - - -/* Exported constants --------------------------------------------------------*/ - -/** @defgroup SDIO_Exported_Constants - * @{ - */ - -/** @defgroup SDIO_Clock_Edge - * @{ - */ - -#define SDIO_ClockEdge_Rising ((uint32_t)0x00000000) -#define SDIO_ClockEdge_Falling ((uint32_t)0x00002000) -#define IS_SDIO_CLOCK_EDGE(EDGE) (((EDGE) == SDIO_ClockEdge_Rising) || \ - ((EDGE) == SDIO_ClockEdge_Falling)) -/** - * @} - */ - -/** @defgroup SDIO_Clock_Bypass - * @{ - */ - -#define SDIO_ClockBypass_Disable ((uint32_t)0x00000000) -#define SDIO_ClockBypass_Enable ((uint32_t)0x00000400) -#define IS_SDIO_CLOCK_BYPASS(BYPASS) (((BYPASS) == SDIO_ClockBypass_Disable) || \ - ((BYPASS) == SDIO_ClockBypass_Enable)) -/** - * @} - */ - -/** @defgroup SDIO_Clock_Power_Save - * @{ - */ - -#define SDIO_ClockPowerSave_Disable ((uint32_t)0x00000000) -#define SDIO_ClockPowerSave_Enable ((uint32_t)0x00000200) -#define IS_SDIO_CLOCK_POWER_SAVE(SAVE) (((SAVE) == SDIO_ClockPowerSave_Disable) || \ - ((SAVE) == SDIO_ClockPowerSave_Enable)) -/** - * @} - */ - -/** @defgroup SDIO_Bus_Wide - * @{ - */ - -#define SDIO_BusWide_1b ((uint32_t)0x00000000) -#define SDIO_BusWide_4b ((uint32_t)0x00000800) -#define SDIO_BusWide_8b ((uint32_t)0x00001000) -#define IS_SDIO_BUS_WIDE(WIDE) (((WIDE) == SDIO_BusWide_1b) || ((WIDE) == SDIO_BusWide_4b) || \ - ((WIDE) == SDIO_BusWide_8b)) - -/** - * @} - */ - -/** @defgroup SDIO_Hardware_Flow_Control - * @{ - */ - -#define SDIO_HardwareFlowControl_Disable ((uint32_t)0x00000000) -#define SDIO_HardwareFlowControl_Enable ((uint32_t)0x00004000) -#define IS_SDIO_HARDWARE_FLOW_CONTROL(CONTROL) (((CONTROL) == SDIO_HardwareFlowControl_Disable) || \ - ((CONTROL) == SDIO_HardwareFlowControl_Enable)) -/** - * @} - */ - -/** @defgroup SDIO_Power_State - * @{ - */ - -#define SDIO_PowerState_OFF ((uint32_t)0x00000000) -#define SDIO_PowerState_ON ((uint32_t)0x00000003) -#define IS_SDIO_POWER_STATE(STATE) (((STATE) == SDIO_PowerState_OFF) || ((STATE) == SDIO_PowerState_ON)) -/** - * @} - */ - - -/** @defgroup SDIO_Interrupt_sources - * @{ - */ - -#define SDIO_IT_CCRCFAIL ((uint32_t)0x00000001) -#define SDIO_IT_DCRCFAIL ((uint32_t)0x00000002) -#define SDIO_IT_CTIMEOUT ((uint32_t)0x00000004) -#define SDIO_IT_DTIMEOUT ((uint32_t)0x00000008) -#define SDIO_IT_TXUNDERR ((uint32_t)0x00000010) -#define SDIO_IT_RXOVERR ((uint32_t)0x00000020) -#define SDIO_IT_CMDREND ((uint32_t)0x00000040) -#define SDIO_IT_CMDSENT ((uint32_t)0x00000080) -#define SDIO_IT_DATAEND ((uint32_t)0x00000100) -#define SDIO_IT_STBITERR ((uint32_t)0x00000200) -#define SDIO_IT_DBCKEND ((uint32_t)0x00000400) -#define SDIO_IT_CMDACT ((uint32_t)0x00000800) -#define SDIO_IT_TXACT ((uint32_t)0x00001000) -#define SDIO_IT_RXACT ((uint32_t)0x00002000) -#define SDIO_IT_TXFIFOHE ((uint32_t)0x00004000) -#define SDIO_IT_RXFIFOHF ((uint32_t)0x00008000) -#define SDIO_IT_TXFIFOF ((uint32_t)0x00010000) -#define SDIO_IT_RXFIFOF ((uint32_t)0x00020000) -#define SDIO_IT_TXFIFOE ((uint32_t)0x00040000) -#define SDIO_IT_RXFIFOE ((uint32_t)0x00080000) -#define SDIO_IT_TXDAVL ((uint32_t)0x00100000) -#define SDIO_IT_RXDAVL ((uint32_t)0x00200000) -#define SDIO_IT_SDIOIT ((uint32_t)0x00400000) -#define SDIO_IT_CEATAEND ((uint32_t)0x00800000) -#define IS_SDIO_IT(IT) ((((IT) & (uint32_t)0xFF000000) == 0x00) && ((IT) != (uint32_t)0x00)) -/** - * @} - */ - -/** @defgroup SDIO_Command_Index - * @{ - */ - -#define IS_SDIO_CMD_INDEX(INDEX) ((INDEX) < 0x40) -/** - * @} - */ - -/** @defgroup SDIO_Response_Type - * @{ - */ - -#define SDIO_Response_No ((uint32_t)0x00000000) -#define SDIO_Response_Short ((uint32_t)0x00000040) -#define SDIO_Response_Long ((uint32_t)0x000000C0) -#define IS_SDIO_RESPONSE(RESPONSE) (((RESPONSE) == SDIO_Response_No) || \ - ((RESPONSE) == SDIO_Response_Short) || \ - ((RESPONSE) == SDIO_Response_Long)) -/** - * @} - */ - -/** @defgroup SDIO_Wait_Interrupt_State - * @{ - */ - -#define SDIO_Wait_No ((uint32_t)0x00000000) /*!< SDIO No Wait, TimeOut is enabled */ -#define SDIO_Wait_IT ((uint32_t)0x00000100) /*!< SDIO Wait Interrupt Request */ -#define SDIO_Wait_Pend ((uint32_t)0x00000200) /*!< SDIO Wait End of transfer */ -#define IS_SDIO_WAIT(WAIT) (((WAIT) == SDIO_Wait_No) || ((WAIT) == SDIO_Wait_IT) || \ - ((WAIT) == SDIO_Wait_Pend)) -/** - * @} - */ - -/** @defgroup SDIO_CPSM_State - * @{ - */ - -#define SDIO_CPSM_Disable ((uint32_t)0x00000000) -#define SDIO_CPSM_Enable ((uint32_t)0x00000400) -#define IS_SDIO_CPSM(CPSM) (((CPSM) == SDIO_CPSM_Enable) || ((CPSM) == SDIO_CPSM_Disable)) -/** - * @} - */ - -/** @defgroup SDIO_Response_Registers - * @{ - */ - -#define SDIO_RESP1 ((uint32_t)0x00000000) -#define SDIO_RESP2 ((uint32_t)0x00000004) -#define SDIO_RESP3 ((uint32_t)0x00000008) -#define SDIO_RESP4 ((uint32_t)0x0000000C) -#define IS_SDIO_RESP(RESP) (((RESP) == SDIO_RESP1) || ((RESP) == SDIO_RESP2) || \ - ((RESP) == SDIO_RESP3) || ((RESP) == SDIO_RESP4)) -/** - * @} - */ - -/** @defgroup SDIO_Data_Length - * @{ - */ - -#define IS_SDIO_DATA_LENGTH(LENGTH) ((LENGTH) <= 0x01FFFFFF) -/** - * @} - */ - -/** @defgroup SDIO_Data_Block_Size - * @{ - */ - -#define SDIO_DataBlockSize_1b ((uint32_t)0x00000000) -#define SDIO_DataBlockSize_2b ((uint32_t)0x00000010) -#define SDIO_DataBlockSize_4b ((uint32_t)0x00000020) -#define SDIO_DataBlockSize_8b ((uint32_t)0x00000030) -#define SDIO_DataBlockSize_16b ((uint32_t)0x00000040) -#define SDIO_DataBlockSize_32b ((uint32_t)0x00000050) -#define SDIO_DataBlockSize_64b ((uint32_t)0x00000060) -#define SDIO_DataBlockSize_128b ((uint32_t)0x00000070) -#define SDIO_DataBlockSize_256b ((uint32_t)0x00000080) -#define SDIO_DataBlockSize_512b ((uint32_t)0x00000090) -#define SDIO_DataBlockSize_1024b ((uint32_t)0x000000A0) -#define SDIO_DataBlockSize_2048b ((uint32_t)0x000000B0) -#define SDIO_DataBlockSize_4096b ((uint32_t)0x000000C0) -#define SDIO_DataBlockSize_8192b ((uint32_t)0x000000D0) -#define SDIO_DataBlockSize_16384b ((uint32_t)0x000000E0) -#define IS_SDIO_BLOCK_SIZE(SIZE) (((SIZE) == SDIO_DataBlockSize_1b) || \ - ((SIZE) == SDIO_DataBlockSize_2b) || \ - ((SIZE) == SDIO_DataBlockSize_4b) || \ - ((SIZE) == SDIO_DataBlockSize_8b) || \ - ((SIZE) == SDIO_DataBlockSize_16b) || \ - ((SIZE) == SDIO_DataBlockSize_32b) || \ - ((SIZE) == SDIO_DataBlockSize_64b) || \ - ((SIZE) == SDIO_DataBlockSize_128b) || \ - ((SIZE) == SDIO_DataBlockSize_256b) || \ - ((SIZE) == SDIO_DataBlockSize_512b) || \ - ((SIZE) == SDIO_DataBlockSize_1024b) || \ - ((SIZE) == SDIO_DataBlockSize_2048b) || \ - ((SIZE) == SDIO_DataBlockSize_4096b) || \ - ((SIZE) == SDIO_DataBlockSize_8192b) || \ - ((SIZE) == SDIO_DataBlockSize_16384b)) -/** - * @} - */ - -/** @defgroup SDIO_Transfer_Direction - * @{ - */ - -#define SDIO_TransferDir_ToCard ((uint32_t)0x00000000) -#define SDIO_TransferDir_ToSDIO ((uint32_t)0x00000002) -#define IS_SDIO_TRANSFER_DIR(DIR) (((DIR) == SDIO_TransferDir_ToCard) || \ - ((DIR) == SDIO_TransferDir_ToSDIO)) -/** - * @} - */ - -/** @defgroup SDIO_Transfer_Type - * @{ - */ - -#define SDIO_TransferMode_Block ((uint32_t)0x00000000) -#define SDIO_TransferMode_Stream ((uint32_t)0x00000004) -#define IS_SDIO_TRANSFER_MODE(MODE) (((MODE) == SDIO_TransferMode_Stream) || \ - ((MODE) == SDIO_TransferMode_Block)) -/** - * @} - */ - -/** @defgroup SDIO_DPSM_State - * @{ - */ - -#define SDIO_DPSM_Disable ((uint32_t)0x00000000) -#define SDIO_DPSM_Enable ((uint32_t)0x00000001) -#define IS_SDIO_DPSM(DPSM) (((DPSM) == SDIO_DPSM_Enable) || ((DPSM) == SDIO_DPSM_Disable)) -/** - * @} - */ - -/** @defgroup SDIO_Flags - * @{ - */ - -#define SDIO_FLAG_CCRCFAIL ((uint32_t)0x00000001) -#define SDIO_FLAG_DCRCFAIL ((uint32_t)0x00000002) -#define SDIO_FLAG_CTIMEOUT ((uint32_t)0x00000004) -#define SDIO_FLAG_DTIMEOUT ((uint32_t)0x00000008) -#define SDIO_FLAG_TXUNDERR ((uint32_t)0x00000010) -#define SDIO_FLAG_RXOVERR ((uint32_t)0x00000020) -#define SDIO_FLAG_CMDREND ((uint32_t)0x00000040) -#define SDIO_FLAG_CMDSENT ((uint32_t)0x00000080) -#define SDIO_FLAG_DATAEND ((uint32_t)0x00000100) -#define SDIO_FLAG_STBITERR ((uint32_t)0x00000200) -#define SDIO_FLAG_DBCKEND ((uint32_t)0x00000400) -#define SDIO_FLAG_CMDACT ((uint32_t)0x00000800) -#define SDIO_FLAG_TXACT ((uint32_t)0x00001000) -#define SDIO_FLAG_RXACT ((uint32_t)0x00002000) -#define SDIO_FLAG_TXFIFOHE ((uint32_t)0x00004000) -#define SDIO_FLAG_RXFIFOHF ((uint32_t)0x00008000) -#define SDIO_FLAG_TXFIFOF ((uint32_t)0x00010000) -#define SDIO_FLAG_RXFIFOF ((uint32_t)0x00020000) -#define SDIO_FLAG_TXFIFOE ((uint32_t)0x00040000) -#define SDIO_FLAG_RXFIFOE ((uint32_t)0x00080000) -#define SDIO_FLAG_TXDAVL ((uint32_t)0x00100000) -#define SDIO_FLAG_RXDAVL ((uint32_t)0x00200000) -#define SDIO_FLAG_SDIOIT ((uint32_t)0x00400000) -#define SDIO_FLAG_CEATAEND ((uint32_t)0x00800000) -#define IS_SDIO_FLAG(FLAG) (((FLAG) == SDIO_FLAG_CCRCFAIL) || \ - ((FLAG) == SDIO_FLAG_DCRCFAIL) || \ - ((FLAG) == SDIO_FLAG_CTIMEOUT) || \ - ((FLAG) == SDIO_FLAG_DTIMEOUT) || \ - ((FLAG) == SDIO_FLAG_TXUNDERR) || \ - ((FLAG) == SDIO_FLAG_RXOVERR) || \ - ((FLAG) == SDIO_FLAG_CMDREND) || \ - ((FLAG) == SDIO_FLAG_CMDSENT) || \ - ((FLAG) == SDIO_FLAG_DATAEND) || \ - ((FLAG) == SDIO_FLAG_STBITERR) || \ - ((FLAG) == SDIO_FLAG_DBCKEND) || \ - ((FLAG) == SDIO_FLAG_CMDACT) || \ - ((FLAG) == SDIO_FLAG_TXACT) || \ - ((FLAG) == SDIO_FLAG_RXACT) || \ - ((FLAG) == SDIO_FLAG_TXFIFOHE) || \ - ((FLAG) == SDIO_FLAG_RXFIFOHF) || \ - ((FLAG) == SDIO_FLAG_TXFIFOF) || \ - ((FLAG) == SDIO_FLAG_RXFIFOF) || \ - ((FLAG) == SDIO_FLAG_TXFIFOE) || \ - ((FLAG) == SDIO_FLAG_RXFIFOE) || \ - ((FLAG) == SDIO_FLAG_TXDAVL) || \ - ((FLAG) == SDIO_FLAG_RXDAVL) || \ - ((FLAG) == SDIO_FLAG_SDIOIT) || \ - ((FLAG) == SDIO_FLAG_CEATAEND)) - -#define IS_SDIO_CLEAR_FLAG(FLAG) ((((FLAG) & (uint32_t)0xFF3FF800) == 0x00) && ((FLAG) != (uint32_t)0x00)) - -#define IS_SDIO_GET_IT(IT) (((IT) == SDIO_IT_CCRCFAIL) || \ - ((IT) == SDIO_IT_DCRCFAIL) || \ - ((IT) == SDIO_IT_CTIMEOUT) || \ - ((IT) == SDIO_IT_DTIMEOUT) || \ - ((IT) == SDIO_IT_TXUNDERR) || \ - ((IT) == SDIO_IT_RXOVERR) || \ - ((IT) == SDIO_IT_CMDREND) || \ - ((IT) == SDIO_IT_CMDSENT) || \ - ((IT) == SDIO_IT_DATAEND) || \ - ((IT) == SDIO_IT_STBITERR) || \ - ((IT) == SDIO_IT_DBCKEND) || \ - ((IT) == SDIO_IT_CMDACT) || \ - ((IT) == SDIO_IT_TXACT) || \ - ((IT) == SDIO_IT_RXACT) || \ - ((IT) == SDIO_IT_TXFIFOHE) || \ - ((IT) == SDIO_IT_RXFIFOHF) || \ - ((IT) == SDIO_IT_TXFIFOF) || \ - ((IT) == SDIO_IT_RXFIFOF) || \ - ((IT) == SDIO_IT_TXFIFOE) || \ - ((IT) == SDIO_IT_RXFIFOE) || \ - ((IT) == SDIO_IT_TXDAVL) || \ - ((IT) == SDIO_IT_RXDAVL) || \ - ((IT) == SDIO_IT_SDIOIT) || \ - ((IT) == SDIO_IT_CEATAEND)) - -#define IS_SDIO_CLEAR_IT(IT) ((((IT) & (uint32_t)0xFF3FF800) == 0x00) && ((IT) != (uint32_t)0x00)) - -/** - * @} - */ - -/** @defgroup SDIO_Read_Wait_Mode - * @{ - */ - -#define SDIO_ReadWaitMode_DATA2 ((uint32_t)0x00000000) -#define SDIO_ReadWaitMode_CLK ((uint32_t)0x00000001) -#define IS_SDIO_READWAIT_MODE(MODE) (((MODE) == SDIO_ReadWaitMode_CLK) || \ - ((MODE) == SDIO_ReadWaitMode_DATA2)) -/** - * @} - */ - -/** - * @} - */ - -/* Exported macro ------------------------------------------------------------*/ -/* Exported functions --------------------------------------------------------*/ -/* Function used to set the SDIO configuration to the default reset state ****/ -void SDIO_DeInit(void); - -/* Initialization and Configuration functions *********************************/ -void SDIO_Init(SDIO_InitTypeDef* SDIO_InitStruct); -void SDIO_StructInit(SDIO_InitTypeDef* SDIO_InitStruct); -void SDIO_ClockCmd(FunctionalState NewState); -void SDIO_SetPowerState(uint32_t SDIO_PowerState); -uint32_t SDIO_GetPowerState(void); - -/* Command path state machine (CPSM) management functions *********************/ -void SDIO_SendCommand(SDIO_CmdInitTypeDef *SDIO_CmdInitStruct); -void SDIO_CmdStructInit(SDIO_CmdInitTypeDef* SDIO_CmdInitStruct); -uint8_t SDIO_GetCommandResponse(void); -uint32_t SDIO_GetResponse(uint32_t SDIO_RESP); - -/* Data path state machine (DPSM) management functions ************************/ -void SDIO_DataConfig(SDIO_DataInitTypeDef* SDIO_DataInitStruct); -void SDIO_DataStructInit(SDIO_DataInitTypeDef* SDIO_DataInitStruct); -uint32_t SDIO_GetDataCounter(void); -uint32_t SDIO_ReadData(void); -void SDIO_WriteData(uint32_t Data); -uint32_t SDIO_GetFIFOCount(void); - -/* SDIO IO Cards mode management functions ************************************/ -void SDIO_StartSDIOReadWait(FunctionalState NewState); -void SDIO_StopSDIOReadWait(FunctionalState NewState); -void SDIO_SetSDIOReadWaitMode(uint32_t SDIO_ReadWaitMode); -void SDIO_SetSDIOOperation(FunctionalState NewState); -void SDIO_SendSDIOSuspendCmd(FunctionalState NewState); - -/* CE-ATA mode management functions *******************************************/ -void SDIO_CommandCompletionCmd(FunctionalState NewState); -void SDIO_CEATAITCmd(FunctionalState NewState); -void SDIO_SendCEATACmd(FunctionalState NewState); - -/* DMA transfers management functions *****************************************/ -void SDIO_DMACmd(FunctionalState NewState); - -/* Interrupts and flags management functions **********************************/ -void SDIO_ITConfig(uint32_t SDIO_IT, FunctionalState NewState); -FlagStatus SDIO_GetFlagStatus(uint32_t SDIO_FLAG); -void SDIO_ClearFlag(uint32_t SDIO_FLAG); -ITStatus SDIO_GetITStatus(uint32_t SDIO_IT); -void SDIO_ClearITPendingBit(uint32_t SDIO_IT); - -#ifdef __cplusplus -} -#endif - -#endif /* __STM32F4xx_SDIO_H */ - -/** - * @} - */ - -/** - * @} - */ - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/stm/lib/stm32f4xx_spi.c b/stm/lib/stm32f4xx_spi.c deleted file mode 100644 index eb725f46e..000000000 --- a/stm/lib/stm32f4xx_spi.c +++ /dev/null @@ -1,1312 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f4xx_spi.c - * @author MCD Application Team - * @version V1.3.0 - * @date 08-November-2013 - * @brief This file provides firmware functions to manage the following - * functionalities of the Serial peripheral interface (SPI): - * + Initialization and Configuration - * + Data transfers functions - * + Hardware CRC Calculation - * + DMA transfers management - * + Interrupts and flags management - * -@verbatim - - =================================================================== - ##### How to use this driver ##### - =================================================================== - [..] - (#) Enable peripheral clock using the following functions - RCC_APB2PeriphClockCmd(RCC_APB2Periph_SPI1, ENABLE) for SPI1 - RCC_APB1PeriphClockCmd(RCC_APB1Periph_SPI2, ENABLE) for SPI2 - RCC_APB1PeriphResetCmd(RCC_APB1Periph_SPI3, ENABLE) for SPI3 - RCC_APB1PeriphResetCmd(RCC_APB1Periph_SPI3, ENABLE) for SPI4 - RCC_APB1PeriphResetCmd(RCC_APB1Periph_SPI3, ENABLE) for SPI5 - RCC_APB1PeriphResetCmd(RCC_APB1Periph_SPI3, ENABLE) for SPI6. - - (#) Enable SCK, MOSI, MISO and NSS GPIO clocks using RCC_AHB1PeriphClockCmd() - function. In I2S mode, if an external clock source is used then the I2S - CKIN pin GPIO clock should also be enabled. - - (#) Peripherals alternate function: - (++) Connect the pin to the desired peripherals' Alternate Function (AF) - using GPIO_PinAFConfig() function - (++) Configure the desired pin in alternate function by: - GPIO_InitStruct->GPIO_Mode = GPIO_Mode_AF - (++) Select the type, pull-up/pull-down and output speed via GPIO_PuPd, - GPIO_OType and GPIO_Speed members - (++) Call GPIO_Init() function In I2S mode, if an external clock source is - used then the I2S CKIN pin should be also configured in Alternate - function Push-pull pull-up mode. - - (#) Program the Polarity, Phase, First Data, Baud Rate Prescaler, Slave - Management, Peripheral Mode and CRC Polynomial values using the SPI_Init() - function. - In I2S mode, program the Mode, Standard, Data Format, MCLK Output, Audio - frequency and Polarity using I2S_Init() function. For I2S mode, make sure - that either: - (++) I2S PLL is configured using the functions - RCC_I2SCLKConfig(RCC_I2S2CLKSource_PLLI2S), RCC_PLLI2SCmd(ENABLE) and - RCC_GetFlagStatus(RCC_FLAG_PLLI2SRDY); or - (++) External clock source is configured using the function - RCC_I2SCLKConfig(RCC_I2S2CLKSource_Ext) and after setting correctly - the define constant I2S_EXTERNAL_CLOCK_VAL in the stm32f4xx_conf.h file. - - (#) Enable the NVIC and the corresponding interrupt using the function - SPI_ITConfig() if you need to use interrupt mode. - - (#) When using the DMA mode - (++) Configure the DMA using DMA_Init() function - (++) Active the needed channel Request using SPI_I2S_DMACmd() function - - (#) Enable the SPI using the SPI_Cmd() function or enable the I2S using - I2S_Cmd(). - - (#) Enable the DMA using the DMA_Cmd() function when using DMA mode. - - (#) Optionally, you can enable/configure the following parameters without - re-initialization (i.e there is no need to call again SPI_Init() function): - (++) When bidirectional mode (SPI_Direction_1Line_Rx or SPI_Direction_1Line_Tx) - is programmed as Data direction parameter using the SPI_Init() function - it can be possible to switch between SPI_Direction_Tx or SPI_Direction_Rx - using the SPI_BiDirectionalLineConfig() function. - (++) When SPI_NSS_Soft is selected as Slave Select Management parameter - using the SPI_Init() function it can be possible to manage the - NSS internal signal using the SPI_NSSInternalSoftwareConfig() function. - (++) Reconfigure the data size using the SPI_DataSizeConfig() function - (++) Enable or disable the SS output using the SPI_SSOutputCmd() function - - (#) To use the CRC Hardware calculation feature refer to the Peripheral - CRC hardware Calculation subsection. - - - [..] It is possible to use SPI in I2S full duplex mode, in this case, each SPI - peripheral is able to manage sending and receiving data simultaneously - using two data lines. Each SPI peripheral has an extended block called I2Sxext - (ie. I2S2ext for SPI2 and I2S3ext for SPI3). - The extension block is not a full SPI IP, it is used only as I2S slave to - implement full duplex mode. The extension block uses the same clock sources - as its master. - To configure I2S full duplex you have to: - - (#) Configure SPIx in I2S mode (I2S_Init() function) as described above. - - (#) Call the I2S_FullDuplexConfig() function using the same strucutre passed to - I2S_Init() function. - - (#) Call I2S_Cmd() for SPIx then for its extended block. - - (#) To configure interrupts or DMA requests and to get/clear flag status, - use I2Sxext instance for the extension block. - - [..] Functions that can be called with I2Sxext instances are: I2S_Cmd(), - I2S_FullDuplexConfig(), SPI_I2S_ReceiveData(), SPI_I2S_SendData(), - SPI_I2S_DMACmd(), SPI_I2S_ITConfig(), SPI_I2S_GetFlagStatus(), - SPI_I2S_ClearFlag(), SPI_I2S_GetITStatus() and SPI_I2S_ClearITPendingBit(). - - Example: To use SPI3 in Full duplex mode (SPI3 is Master Tx, I2S3ext is Slave Rx): - - RCC_APB1PeriphClockCmd(RCC_APB1Periph_SPI3, ENABLE); - I2S_StructInit(&I2SInitStruct); - I2SInitStruct.Mode = I2S_Mode_MasterTx; - I2S_Init(SPI3, &I2SInitStruct); - I2S_FullDuplexConfig(SPI3ext, &I2SInitStruct) - I2S_Cmd(SPI3, ENABLE); - I2S_Cmd(SPI3ext, ENABLE); - ... - while (SPI_I2S_GetFlagStatus(SPI2, SPI_FLAG_TXE) == RESET) - {} - SPI_I2S_SendData(SPI3, txdata[i]); - ... - while (SPI_I2S_GetFlagStatus(I2S3ext, SPI_FLAG_RXNE) == RESET) - {} - rxdata[i] = SPI_I2S_ReceiveData(I2S3ext); - ... - - [..] - (@) In I2S mode: if an external clock is used as source clock for the I2S, - then the define I2S_EXTERNAL_CLOCK_VAL in file stm32f4xx_conf.h should - be enabled and set to the value of the source clock frequency (in Hz). - - (@) In SPI mode: To use the SPI TI mode, call the function SPI_TIModeCmd() - just after calling the function SPI_Init(). - -@endverbatim - * - ****************************************************************************** - * @attention - * - *

© COPYRIGHT 2013 STMicroelectronics

- * - * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License"); - * You may not use this file except in compliance with the License. - * You may obtain a copy of the License at: - * - * http://www.st.com/software_license_agreement_liberty_v2 - * - * Unless required by applicable law or agreed to in writing, software - * distributed under the License is distributed on an "AS IS" BASIS, - * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - * See the License for the specific language governing permissions and - * limitations under the License. - * - ****************************************************************************** - */ - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx_spi.h" -#include "stm32f4xx_rcc.h" - -/** @addtogroup STM32F4xx_StdPeriph_Driver - * @{ - */ - -/** @defgroup SPI - * @brief SPI driver modules - * @{ - */ - -/* Private typedef -----------------------------------------------------------*/ -/* Private define ------------------------------------------------------------*/ - -/* SPI registers Masks */ -#define CR1_CLEAR_MASK ((uint16_t)0x3040) -#define I2SCFGR_CLEAR_MASK ((uint16_t)0xF040) - -/* RCC PLLs masks */ -#define PLLCFGR_PPLR_MASK ((uint32_t)0x70000000) -#define PLLCFGR_PPLN_MASK ((uint32_t)0x00007FC0) - -#define SPI_CR2_FRF ((uint16_t)0x0010) -#define SPI_SR_TIFRFE ((uint16_t)0x0100) - -/* Private macro -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -/* Private function prototypes -----------------------------------------------*/ -/* Private functions ---------------------------------------------------------*/ - -/** @defgroup SPI_Private_Functions - * @{ - */ - -/** @defgroup SPI_Group1 Initialization and Configuration functions - * @brief Initialization and Configuration functions - * -@verbatim - =============================================================================== - ##### Initialization and Configuration functions ##### - =============================================================================== - [..] This section provides a set of functions allowing to initialize the SPI - Direction, SPI Mode, SPI Data Size, SPI Polarity, SPI Phase, SPI NSS - Management, SPI Baud Rate Prescaler, SPI First Bit and SPI CRC Polynomial. - - [..] The SPI_Init() function follows the SPI configuration procedures for Master - mode and Slave mode (details for these procedures are available in reference - manual (RM0090)). - -@endverbatim - * @{ - */ - -/** - * @brief De-initialize the SPIx peripheral registers to their default reset values. - * @param SPIx: To select the SPIx/I2Sx peripheral, where x can be: 1, 2, 3, 4, 5 or 6 - * in SPI mode or 2 or 3 in I2S mode. - * - * @note The extended I2S blocks (ie. I2S2ext and I2S3ext blocks) are de-initialized - * when the relative I2S peripheral is de-initialized (the extended block's clock - * is managed by the I2S peripheral clock). - * - * @retval None - */ -void SPI_I2S_DeInit(SPI_TypeDef* SPIx) -{ - /* Check the parameters */ - assert_param(IS_SPI_ALL_PERIPH(SPIx)); - - if (SPIx == SPI1) - { - /* Enable SPI1 reset state */ - RCC_APB2PeriphResetCmd(RCC_APB2Periph_SPI1, ENABLE); - /* Release SPI1 from reset state */ - RCC_APB2PeriphResetCmd(RCC_APB2Periph_SPI1, DISABLE); - } - else if (SPIx == SPI2) - { - /* Enable SPI2 reset state */ - RCC_APB1PeriphResetCmd(RCC_APB1Periph_SPI2, ENABLE); - /* Release SPI2 from reset state */ - RCC_APB1PeriphResetCmd(RCC_APB1Periph_SPI2, DISABLE); - } - else if (SPIx == SPI3) - { - /* Enable SPI3 reset state */ - RCC_APB1PeriphResetCmd(RCC_APB1Periph_SPI3, ENABLE); - /* Release SPI3 from reset state */ - RCC_APB1PeriphResetCmd(RCC_APB1Periph_SPI3, DISABLE); - } - else if (SPIx == SPI4) - { - /* Enable SPI4 reset state */ - RCC_APB2PeriphResetCmd(RCC_APB2Periph_SPI4, ENABLE); - /* Release SPI4 from reset state */ - RCC_APB2PeriphResetCmd(RCC_APB2Periph_SPI4, DISABLE); - } - else if (SPIx == SPI5) - { - /* Enable SPI5 reset state */ - RCC_APB2PeriphResetCmd(RCC_APB2Periph_SPI5, ENABLE); - /* Release SPI5 from reset state */ - RCC_APB2PeriphResetCmd(RCC_APB2Periph_SPI5, DISABLE); - } - else - { - if (SPIx == SPI6) - { - /* Enable SPI6 reset state */ - RCC_APB2PeriphResetCmd(RCC_APB2Periph_SPI6, ENABLE); - /* Release SPI6 from reset state */ - RCC_APB2PeriphResetCmd(RCC_APB2Periph_SPI6, DISABLE); - } - } -} - -/** - * @brief Initializes the SPIx peripheral according to the specified - * parameters in the SPI_InitStruct. - * @param SPIx: where x can be 1, 2, 3, 4, 5 or 6 to select the SPI peripheral. - * @param SPI_InitStruct: pointer to a SPI_InitTypeDef structure that - * contains the configuration information for the specified SPI peripheral. - * @retval None - */ -void SPI_Init(SPI_TypeDef* SPIx, SPI_InitTypeDef* SPI_InitStruct) -{ - uint16_t tmpreg = 0; - - /* check the parameters */ - assert_param(IS_SPI_ALL_PERIPH(SPIx)); - - /* Check the SPI parameters */ - assert_param(IS_SPI_DIRECTION_MODE(SPI_InitStruct->SPI_Direction)); - assert_param(IS_SPI_MODE(SPI_InitStruct->SPI_Mode)); - assert_param(IS_SPI_DATASIZE(SPI_InitStruct->SPI_DataSize)); - assert_param(IS_SPI_CPOL(SPI_InitStruct->SPI_CPOL)); - assert_param(IS_SPI_CPHA(SPI_InitStruct->SPI_CPHA)); - assert_param(IS_SPI_NSS(SPI_InitStruct->SPI_NSS)); - assert_param(IS_SPI_BAUDRATE_PRESCALER(SPI_InitStruct->SPI_BaudRatePrescaler)); - assert_param(IS_SPI_FIRST_BIT(SPI_InitStruct->SPI_FirstBit)); - assert_param(IS_SPI_CRC_POLYNOMIAL(SPI_InitStruct->SPI_CRCPolynomial)); - -/*---------------------------- SPIx CR1 Configuration ------------------------*/ - /* Get the SPIx CR1 value */ - tmpreg = SPIx->CR1; - /* Clear BIDIMode, BIDIOE, RxONLY, SSM, SSI, LSBFirst, BR, MSTR, CPOL and CPHA bits */ - tmpreg &= CR1_CLEAR_MASK; - /* Configure SPIx: direction, NSS management, first transmitted bit, BaudRate prescaler - master/salve mode, CPOL and CPHA */ - /* Set BIDImode, BIDIOE and RxONLY bits according to SPI_Direction value */ - /* Set SSM, SSI and MSTR bits according to SPI_Mode and SPI_NSS values */ - /* Set LSBFirst bit according to SPI_FirstBit value */ - /* Set BR bits according to SPI_BaudRatePrescaler value */ - /* Set CPOL bit according to SPI_CPOL value */ - /* Set CPHA bit according to SPI_CPHA value */ - tmpreg |= (uint16_t)((uint32_t)SPI_InitStruct->SPI_Direction | SPI_InitStruct->SPI_Mode | - SPI_InitStruct->SPI_DataSize | SPI_InitStruct->SPI_CPOL | - SPI_InitStruct->SPI_CPHA | SPI_InitStruct->SPI_NSS | - SPI_InitStruct->SPI_BaudRatePrescaler | SPI_InitStruct->SPI_FirstBit); - /* Write to SPIx CR1 */ - SPIx->CR1 = tmpreg; - - /* Activate the SPI mode (Reset I2SMOD bit in I2SCFGR register) */ - SPIx->I2SCFGR &= (uint16_t)~((uint16_t)SPI_I2SCFGR_I2SMOD); -/*---------------------------- SPIx CRCPOLY Configuration --------------------*/ - /* Write to SPIx CRCPOLY */ - SPIx->CRCPR = SPI_InitStruct->SPI_CRCPolynomial; -} - -/** - * @brief Initializes the SPIx peripheral according to the specified - * parameters in the I2S_InitStruct. - * @param SPIx: where x can be 2 or 3 to select the SPI peripheral (configured in I2S mode). - * @param I2S_InitStruct: pointer to an I2S_InitTypeDef structure that - * contains the configuration information for the specified SPI peripheral - * configured in I2S mode. - * - * @note The function calculates the optimal prescaler needed to obtain the most - * accurate audio frequency (depending on the I2S clock source, the PLL values - * and the product configuration). But in case the prescaler value is greater - * than 511, the default value (0x02) will be configured instead. - * - * @note if an external clock is used as source clock for the I2S, then the define - * I2S_EXTERNAL_CLOCK_VAL in file stm32f4xx_conf.h should be enabled and set - * to the value of the the source clock frequency (in Hz). - * - * @retval None - */ -void I2S_Init(SPI_TypeDef* SPIx, I2S_InitTypeDef* I2S_InitStruct) -{ - uint16_t tmpreg = 0, i2sdiv = 2, i2sodd = 0, packetlength = 1; - uint32_t tmp = 0, i2sclk = 0; -#ifndef I2S_EXTERNAL_CLOCK_VAL - uint32_t pllm = 0, plln = 0, pllr = 0; -#endif /* I2S_EXTERNAL_CLOCK_VAL */ - - /* Check the I2S parameters */ - assert_param(IS_SPI_23_PERIPH(SPIx)); - assert_param(IS_I2S_MODE(I2S_InitStruct->I2S_Mode)); - assert_param(IS_I2S_STANDARD(I2S_InitStruct->I2S_Standard)); - assert_param(IS_I2S_DATA_FORMAT(I2S_InitStruct->I2S_DataFormat)); - assert_param(IS_I2S_MCLK_OUTPUT(I2S_InitStruct->I2S_MCLKOutput)); - assert_param(IS_I2S_AUDIO_FREQ(I2S_InitStruct->I2S_AudioFreq)); - assert_param(IS_I2S_CPOL(I2S_InitStruct->I2S_CPOL)); - -/*----------------------- SPIx I2SCFGR & I2SPR Configuration -----------------*/ - /* Clear I2SMOD, I2SE, I2SCFG, PCMSYNC, I2SSTD, CKPOL, DATLEN and CHLEN bits */ - SPIx->I2SCFGR &= I2SCFGR_CLEAR_MASK; - SPIx->I2SPR = 0x0002; - - /* Get the I2SCFGR register value */ - tmpreg = SPIx->I2SCFGR; - - /* If the default value has to be written, reinitialize i2sdiv and i2sodd*/ - if(I2S_InitStruct->I2S_AudioFreq == I2S_AudioFreq_Default) - { - i2sodd = (uint16_t)0; - i2sdiv = (uint16_t)2; - } - /* If the requested audio frequency is not the default, compute the prescaler */ - else - { - /* Check the frame length (For the Prescaler computing) *******************/ - if(I2S_InitStruct->I2S_DataFormat == I2S_DataFormat_16b) - { - /* Packet length is 16 bits */ - packetlength = 1; - } - else - { - /* Packet length is 32 bits */ - packetlength = 2; - } - - /* Get I2S source Clock frequency ****************************************/ - - /* If an external I2S clock has to be used, this define should be set - in the project configuration or in the stm32f4xx_conf.h file */ - #ifdef I2S_EXTERNAL_CLOCK_VAL - /* Set external clock as I2S clock source */ - if ((RCC->CFGR & RCC_CFGR_I2SSRC) == 0) - { - RCC->CFGR |= (uint32_t)RCC_CFGR_I2SSRC; - } - - /* Set the I2S clock to the external clock value */ - i2sclk = I2S_EXTERNAL_CLOCK_VAL; - - #else /* There is no define for External I2S clock source */ - /* Set PLLI2S as I2S clock source */ - if ((RCC->CFGR & RCC_CFGR_I2SSRC) != 0) - { - RCC->CFGR &= ~(uint32_t)RCC_CFGR_I2SSRC; - } - - /* Get the PLLI2SN value */ - plln = (uint32_t)(((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SN) >> 6) & \ - (RCC_PLLI2SCFGR_PLLI2SN >> 6)); - - /* Get the PLLI2SR value */ - pllr = (uint32_t)(((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SR) >> 28) & \ - (RCC_PLLI2SCFGR_PLLI2SR >> 28)); - - /* Get the PLLM value */ - pllm = (uint32_t)(RCC->PLLCFGR & RCC_PLLCFGR_PLLM); - - /* Get the I2S source clock value */ - i2sclk = (uint32_t)(((HSE_VALUE / pllm) * plln) / pllr); - #endif /* I2S_EXTERNAL_CLOCK_VAL */ - - /* Compute the Real divider depending on the MCLK output state, with a floating point */ - if(I2S_InitStruct->I2S_MCLKOutput == I2S_MCLKOutput_Enable) - { - /* MCLK output is enabled */ - tmp = (uint16_t)(((((i2sclk / 256) * 10) / I2S_InitStruct->I2S_AudioFreq)) + 5); - } - else - { - /* MCLK output is disabled */ - tmp = (uint16_t)(((((i2sclk / (32 * packetlength)) *10 ) / I2S_InitStruct->I2S_AudioFreq)) + 5); - } - - /* Remove the flatting point */ - tmp = tmp / 10; - - /* Check the parity of the divider */ - i2sodd = (uint16_t)(tmp & (uint16_t)0x0001); - - /* Compute the i2sdiv prescaler */ - i2sdiv = (uint16_t)((tmp - i2sodd) / 2); - - /* Get the Mask for the Odd bit (SPI_I2SPR[8]) register */ - i2sodd = (uint16_t) (i2sodd << 8); - } - - /* Test if the divider is 1 or 0 or greater than 0xFF */ - if ((i2sdiv < 2) || (i2sdiv > 0xFF)) - { - /* Set the default values */ - i2sdiv = 2; - i2sodd = 0; - } - - /* Write to SPIx I2SPR register the computed value */ - SPIx->I2SPR = (uint16_t)((uint16_t)i2sdiv | (uint16_t)(i2sodd | (uint16_t)I2S_InitStruct->I2S_MCLKOutput)); - - /* Configure the I2S with the SPI_InitStruct values */ - tmpreg |= (uint16_t)((uint16_t)SPI_I2SCFGR_I2SMOD | (uint16_t)(I2S_InitStruct->I2S_Mode | \ - (uint16_t)(I2S_InitStruct->I2S_Standard | (uint16_t)(I2S_InitStruct->I2S_DataFormat | \ - (uint16_t)I2S_InitStruct->I2S_CPOL)))); - - /* Write to SPIx I2SCFGR */ - SPIx->I2SCFGR = tmpreg; -} - -/** - * @brief Fills each SPI_InitStruct member with its default value. - * @param SPI_InitStruct: pointer to a SPI_InitTypeDef structure which will be initialized. - * @retval None - */ -void SPI_StructInit(SPI_InitTypeDef* SPI_InitStruct) -{ -/*--------------- Reset SPI init structure parameters values -----------------*/ - /* Initialize the SPI_Direction member */ - SPI_InitStruct->SPI_Direction = SPI_Direction_2Lines_FullDuplex; - /* initialize the SPI_Mode member */ - SPI_InitStruct->SPI_Mode = SPI_Mode_Slave; - /* initialize the SPI_DataSize member */ - SPI_InitStruct->SPI_DataSize = SPI_DataSize_8b; - /* Initialize the SPI_CPOL member */ - SPI_InitStruct->SPI_CPOL = SPI_CPOL_Low; - /* Initialize the SPI_CPHA member */ - SPI_InitStruct->SPI_CPHA = SPI_CPHA_1Edge; - /* Initialize the SPI_NSS member */ - SPI_InitStruct->SPI_NSS = SPI_NSS_Hard; - /* Initialize the SPI_BaudRatePrescaler member */ - SPI_InitStruct->SPI_BaudRatePrescaler = SPI_BaudRatePrescaler_2; - /* Initialize the SPI_FirstBit member */ - SPI_InitStruct->SPI_FirstBit = SPI_FirstBit_MSB; - /* Initialize the SPI_CRCPolynomial member */ - SPI_InitStruct->SPI_CRCPolynomial = 7; -} - -/** - * @brief Fills each I2S_InitStruct member with its default value. - * @param I2S_InitStruct: pointer to a I2S_InitTypeDef structure which will be initialized. - * @retval None - */ -void I2S_StructInit(I2S_InitTypeDef* I2S_InitStruct) -{ -/*--------------- Reset I2S init structure parameters values -----------------*/ - /* Initialize the I2S_Mode member */ - I2S_InitStruct->I2S_Mode = I2S_Mode_SlaveTx; - - /* Initialize the I2S_Standard member */ - I2S_InitStruct->I2S_Standard = I2S_Standard_Phillips; - - /* Initialize the I2S_DataFormat member */ - I2S_InitStruct->I2S_DataFormat = I2S_DataFormat_16b; - - /* Initialize the I2S_MCLKOutput member */ - I2S_InitStruct->I2S_MCLKOutput = I2S_MCLKOutput_Disable; - - /* Initialize the I2S_AudioFreq member */ - I2S_InitStruct->I2S_AudioFreq = I2S_AudioFreq_Default; - - /* Initialize the I2S_CPOL member */ - I2S_InitStruct->I2S_CPOL = I2S_CPOL_Low; -} - -/** - * @brief Enables or disables the specified SPI peripheral. - * @param SPIx: where x can be 1, 2, 3, 4, 5 or 6 to select the SPI peripheral. - * @param NewState: new state of the SPIx peripheral. - * This parameter can be: ENABLE or DISABLE. - * @retval None - */ -void SPI_Cmd(SPI_TypeDef* SPIx, FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_SPI_ALL_PERIPH(SPIx)); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - if (NewState != DISABLE) - { - /* Enable the selected SPI peripheral */ - SPIx->CR1 |= SPI_CR1_SPE; - } - else - { - /* Disable the selected SPI peripheral */ - SPIx->CR1 &= (uint16_t)~((uint16_t)SPI_CR1_SPE); - } -} - -/** - * @brief Enables or disables the specified SPI peripheral (in I2S mode). - * @param SPIx: where x can be 2 or 3 to select the SPI peripheral (or I2Sxext - * for full duplex mode). - * @param NewState: new state of the SPIx peripheral. - * This parameter can be: ENABLE or DISABLE. - * @retval None - */ -void I2S_Cmd(SPI_TypeDef* SPIx, FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_SPI_23_PERIPH_EXT(SPIx)); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - - if (NewState != DISABLE) - { - /* Enable the selected SPI peripheral (in I2S mode) */ - SPIx->I2SCFGR |= SPI_I2SCFGR_I2SE; - } - else - { - /* Disable the selected SPI peripheral in I2S mode */ - SPIx->I2SCFGR &= (uint16_t)~((uint16_t)SPI_I2SCFGR_I2SE); - } -} - -/** - * @brief Configures the data size for the selected SPI. - * @param SPIx: where x can be 1, 2, 3, 4, 5 or 6 to select the SPI peripheral. - * @param SPI_DataSize: specifies the SPI data size. - * This parameter can be one of the following values: - * @arg SPI_DataSize_16b: Set data frame format to 16bit - * @arg SPI_DataSize_8b: Set data frame format to 8bit - * @retval None - */ -void SPI_DataSizeConfig(SPI_TypeDef* SPIx, uint16_t SPI_DataSize) -{ - /* Check the parameters */ - assert_param(IS_SPI_ALL_PERIPH(SPIx)); - assert_param(IS_SPI_DATASIZE(SPI_DataSize)); - /* Clear DFF bit */ - SPIx->CR1 &= (uint16_t)~SPI_DataSize_16b; - /* Set new DFF bit value */ - SPIx->CR1 |= SPI_DataSize; -} - -/** - * @brief Selects the data transfer direction in bidirectional mode for the specified SPI. - * @param SPIx: where x can be 1, 2, 3, 4, 5 or 6 to select the SPI peripheral. - * @param SPI_Direction: specifies the data transfer direction in bidirectional mode. - * This parameter can be one of the following values: - * @arg SPI_Direction_Tx: Selects Tx transmission direction - * @arg SPI_Direction_Rx: Selects Rx receive direction - * @retval None - */ -void SPI_BiDirectionalLineConfig(SPI_TypeDef* SPIx, uint16_t SPI_Direction) -{ - /* Check the parameters */ - assert_param(IS_SPI_ALL_PERIPH(SPIx)); - assert_param(IS_SPI_DIRECTION(SPI_Direction)); - if (SPI_Direction == SPI_Direction_Tx) - { - /* Set the Tx only mode */ - SPIx->CR1 |= SPI_Direction_Tx; - } - else - { - /* Set the Rx only mode */ - SPIx->CR1 &= SPI_Direction_Rx; - } -} - -/** - * @brief Configures internally by software the NSS pin for the selected SPI. - * @param SPIx: where x can be 1, 2, 3, 4, 5 or 6 to select the SPI peripheral. - * @param SPI_NSSInternalSoft: specifies the SPI NSS internal state. - * This parameter can be one of the following values: - * @arg SPI_NSSInternalSoft_Set: Set NSS pin internally - * @arg SPI_NSSInternalSoft_Reset: Reset NSS pin internally - * @retval None - */ -void SPI_NSSInternalSoftwareConfig(SPI_TypeDef* SPIx, uint16_t SPI_NSSInternalSoft) -{ - /* Check the parameters */ - assert_param(IS_SPI_ALL_PERIPH(SPIx)); - assert_param(IS_SPI_NSS_INTERNAL(SPI_NSSInternalSoft)); - if (SPI_NSSInternalSoft != SPI_NSSInternalSoft_Reset) - { - /* Set NSS pin internally by software */ - SPIx->CR1 |= SPI_NSSInternalSoft_Set; - } - else - { - /* Reset NSS pin internally by software */ - SPIx->CR1 &= SPI_NSSInternalSoft_Reset; - } -} - -/** - * @brief Enables or disables the SS output for the selected SPI. - * @param SPIx: where x can be 1, 2, 3, 4, 5 or 6 to select the SPI peripheral. - * @param NewState: new state of the SPIx SS output. - * This parameter can be: ENABLE or DISABLE. - * @retval None - */ -void SPI_SSOutputCmd(SPI_TypeDef* SPIx, FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_SPI_ALL_PERIPH(SPIx)); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - if (NewState != DISABLE) - { - /* Enable the selected SPI SS output */ - SPIx->CR2 |= (uint16_t)SPI_CR2_SSOE; - } - else - { - /* Disable the selected SPI SS output */ - SPIx->CR2 &= (uint16_t)~((uint16_t)SPI_CR2_SSOE); - } -} - -/** - * @brief Enables or disables the SPIx/I2Sx DMA interface. - * - * @note This function can be called only after the SPI_Init() function has - * been called. - * @note When TI mode is selected, the control bits SSM, SSI, CPOL and CPHA - * are not taken into consideration and are configured by hardware - * respectively to the TI mode requirements. - * - * @param SPIx: where x can be 1, 2, 3, 4, 5 or 6 - * @param NewState: new state of the selected SPI TI communication mode. - * This parameter can be: ENABLE or DISABLE. - * @retval None - */ -void SPI_TIModeCmd(SPI_TypeDef* SPIx, FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_SPI_ALL_PERIPH(SPIx)); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - - if (NewState != DISABLE) - { - /* Enable the TI mode for the selected SPI peripheral */ - SPIx->CR2 |= SPI_CR2_FRF; - } - else - { - /* Disable the TI mode for the selected SPI peripheral */ - SPIx->CR2 &= (uint16_t)~SPI_CR2_FRF; - } -} - -/** - * @brief Configures the full duplex mode for the I2Sx peripheral using its - * extension I2Sxext according to the specified parameters in the - * I2S_InitStruct. - * @param I2Sxext: where x can be 2 or 3 to select the I2S peripheral extension block. - * @param I2S_InitStruct: pointer to an I2S_InitTypeDef structure that - * contains the configuration information for the specified I2S peripheral - * extension. - * - * @note The structure pointed by I2S_InitStruct parameter should be the same - * used for the master I2S peripheral. In this case, if the master is - * configured as transmitter, the slave will be receiver and vice versa. - * Or you can force a different mode by modifying the field I2S_Mode to the - * value I2S_SlaveRx or I2S_SlaveTx indepedently of the master configuration. - * - * @note The I2S full duplex extension can be configured in slave mode only. - * - * @retval None - */ -void I2S_FullDuplexConfig(SPI_TypeDef* I2Sxext, I2S_InitTypeDef* I2S_InitStruct) -{ - uint16_t tmpreg = 0, tmp = 0; - - /* Check the I2S parameters */ - assert_param(IS_I2S_EXT_PERIPH(I2Sxext)); - assert_param(IS_I2S_MODE(I2S_InitStruct->I2S_Mode)); - assert_param(IS_I2S_STANDARD(I2S_InitStruct->I2S_Standard)); - assert_param(IS_I2S_DATA_FORMAT(I2S_InitStruct->I2S_DataFormat)); - assert_param(IS_I2S_CPOL(I2S_InitStruct->I2S_CPOL)); - -/*----------------------- SPIx I2SCFGR & I2SPR Configuration -----------------*/ - /* Clear I2SMOD, I2SE, I2SCFG, PCMSYNC, I2SSTD, CKPOL, DATLEN and CHLEN bits */ - I2Sxext->I2SCFGR &= I2SCFGR_CLEAR_MASK; - I2Sxext->I2SPR = 0x0002; - - /* Get the I2SCFGR register value */ - tmpreg = I2Sxext->I2SCFGR; - - /* Get the mode to be configured for the extended I2S */ - if ((I2S_InitStruct->I2S_Mode == I2S_Mode_MasterTx) || (I2S_InitStruct->I2S_Mode == I2S_Mode_SlaveTx)) - { - tmp = I2S_Mode_SlaveRx; - } - else - { - if ((I2S_InitStruct->I2S_Mode == I2S_Mode_MasterRx) || (I2S_InitStruct->I2S_Mode == I2S_Mode_SlaveRx)) - { - tmp = I2S_Mode_SlaveTx; - } - } - - - /* Configure the I2S with the SPI_InitStruct values */ - tmpreg |= (uint16_t)((uint16_t)SPI_I2SCFGR_I2SMOD | (uint16_t)(tmp | \ - (uint16_t)(I2S_InitStruct->I2S_Standard | (uint16_t)(I2S_InitStruct->I2S_DataFormat | \ - (uint16_t)I2S_InitStruct->I2S_CPOL)))); - - /* Write to SPIx I2SCFGR */ - I2Sxext->I2SCFGR = tmpreg; -} - -/** - * @} - */ - -/** @defgroup SPI_Group2 Data transfers functions - * @brief Data transfers functions - * -@verbatim - =============================================================================== - ##### Data transfers functions ##### - =============================================================================== - - [..] This section provides a set of functions allowing to manage the SPI data - transfers. In reception, data are received and then stored into an internal - Rx buffer while. In transmission, data are first stored into an internal Tx - buffer before being transmitted. - - [..] The read access of the SPI_DR register can be done using the SPI_I2S_ReceiveData() - function and returns the Rx buffered value. Whereas a write access to the SPI_DR - can be done using SPI_I2S_SendData() function and stores the written data into - Tx buffer. - -@endverbatim - * @{ - */ - -/** - * @brief Returns the most recent received data by the SPIx/I2Sx peripheral. - * @param SPIx: To select the SPIx/I2Sx peripheral, where x can be: 1, 2, 3, 4, 5 or 6 - * in SPI mode or 2 or 3 in I2S mode or I2Sxext for I2S full duplex mode. - * @retval The value of the received data. - */ -uint16_t SPI_I2S_ReceiveData(SPI_TypeDef* SPIx) -{ - /* Check the parameters */ - assert_param(IS_SPI_ALL_PERIPH_EXT(SPIx)); - - /* Return the data in the DR register */ - return SPIx->DR; -} - -/** - * @brief Transmits a Data through the SPIx/I2Sx peripheral. - * @param SPIx: To select the SPIx/I2Sx peripheral, where x can be: 1, 2, 3, 4, 5 or 6 - * in SPI mode or 2 or 3 in I2S mode or I2Sxext for I2S full duplex mode. - * @param Data: Data to be transmitted. - * @retval None - */ -void SPI_I2S_SendData(SPI_TypeDef* SPIx, uint16_t Data) -{ - /* Check the parameters */ - assert_param(IS_SPI_ALL_PERIPH_EXT(SPIx)); - - /* Write in the DR register the data to be sent */ - SPIx->DR = Data; -} - -/** - * @} - */ - -/** @defgroup SPI_Group3 Hardware CRC Calculation functions - * @brief Hardware CRC Calculation functions - * -@verbatim - =============================================================================== - ##### Hardware CRC Calculation functions ##### - =============================================================================== - - [..] This section provides a set of functions allowing to manage the SPI CRC hardware - calculation - - [..] SPI communication using CRC is possible through the following procedure: - (#) Program the Data direction, Polarity, Phase, First Data, Baud Rate Prescaler, - Slave Management, Peripheral Mode and CRC Polynomial values using the SPI_Init() - function. - (#) Enable the CRC calculation using the SPI_CalculateCRC() function. - (#) Enable the SPI using the SPI_Cmd() function - (#) Before writing the last data to the TX buffer, set the CRCNext bit using the - SPI_TransmitCRC() function to indicate that after transmission of the last - data, the CRC should be transmitted. - (#) After transmitting the last data, the SPI transmits the CRC. The SPI_CR1_CRCNEXT - bit is reset. The CRC is also received and compared against the SPI_RXCRCR - value. - If the value does not match, the SPI_FLAG_CRCERR flag is set and an interrupt - can be generated when the SPI_I2S_IT_ERR interrupt is enabled. - - [..] - (@) It is advised not to read the calculated CRC values during the communication. - - (@) When the SPI is in slave mode, be careful to enable CRC calculation only - when the clock is stable, that is, when the clock is in the steady state. - If not, a wrong CRC calculation may be done. In fact, the CRC is sensitive - to the SCK slave input clock as soon as CRCEN is set, and this, whatever - the value of the SPE bit. - - (@) With high bitrate frequencies, be careful when transmitting the CRC. - As the number of used CPU cycles has to be as low as possible in the CRC - transfer phase, it is forbidden to call software functions in the CRC - transmission sequence to avoid errors in the last data and CRC reception. - In fact, CRCNEXT bit has to be written before the end of the transmission/reception - of the last data. - - (@) For high bit rate frequencies, it is advised to use the DMA mode to avoid the - degradation of the SPI speed performance due to CPU accesses impacting the - SPI bandwidth. - - (@) When the STM32F4xx is configured as slave and the NSS hardware mode is - used, the NSS pin needs to be kept low between the data phase and the CRC - phase. - - (@) When the SPI is configured in slave mode with the CRC feature enabled, CRC - calculation takes place even if a high level is applied on the NSS pin. - This may happen for example in case of a multi-slave environment where the - communication master addresses slaves alternately. - - (@) Between a slave de-selection (high level on NSS) and a new slave selection - (low level on NSS), the CRC value should be cleared on both master and slave - sides in order to resynchronize the master and slave for their respective - CRC calculation. - - (@) To clear the CRC, follow the procedure below: - (#@) Disable SPI using the SPI_Cmd() function - (#@) Disable the CRC calculation using the SPI_CalculateCRC() function. - (#@) Enable the CRC calculation using the SPI_CalculateCRC() function. - (#@) Enable SPI using the SPI_Cmd() function. - -@endverbatim - * @{ - */ - -/** - * @brief Enables or disables the CRC value calculation of the transferred bytes. - * @param SPIx: where x can be 1, 2, 3, 4, 5 or 6 to select the SPI peripheral. - * @param NewState: new state of the SPIx CRC value calculation. - * This parameter can be: ENABLE or DISABLE. - * @retval None - */ -void SPI_CalculateCRC(SPI_TypeDef* SPIx, FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_SPI_ALL_PERIPH(SPIx)); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - if (NewState != DISABLE) - { - /* Enable the selected SPI CRC calculation */ - SPIx->CR1 |= SPI_CR1_CRCEN; - } - else - { - /* Disable the selected SPI CRC calculation */ - SPIx->CR1 &= (uint16_t)~((uint16_t)SPI_CR1_CRCEN); - } -} - -/** - * @brief Transmit the SPIx CRC value. - * @param SPIx: where x can be 1, 2, 3, 4, 5 or 6 to select the SPI peripheral. - * @retval None - */ -void SPI_TransmitCRC(SPI_TypeDef* SPIx) -{ - /* Check the parameters */ - assert_param(IS_SPI_ALL_PERIPH(SPIx)); - - /* Enable the selected SPI CRC transmission */ - SPIx->CR1 |= SPI_CR1_CRCNEXT; -} - -/** - * @brief Returns the transmit or the receive CRC register value for the specified SPI. - * @param SPIx: where x can be 1, 2, 3, 4, 5 or 6 to select the SPI peripheral. - * @param SPI_CRC: specifies the CRC register to be read. - * This parameter can be one of the following values: - * @arg SPI_CRC_Tx: Selects Tx CRC register - * @arg SPI_CRC_Rx: Selects Rx CRC register - * @retval The selected CRC register value.. - */ -uint16_t SPI_GetCRC(SPI_TypeDef* SPIx, uint8_t SPI_CRC) -{ - uint16_t crcreg = 0; - /* Check the parameters */ - assert_param(IS_SPI_ALL_PERIPH(SPIx)); - assert_param(IS_SPI_CRC(SPI_CRC)); - if (SPI_CRC != SPI_CRC_Rx) - { - /* Get the Tx CRC register */ - crcreg = SPIx->TXCRCR; - } - else - { - /* Get the Rx CRC register */ - crcreg = SPIx->RXCRCR; - } - /* Return the selected CRC register */ - return crcreg; -} - -/** - * @brief Returns the CRC Polynomial register value for the specified SPI. - * @param SPIx: where x can be 1, 2, 3, 4, 5 or 6 to select the SPI peripheral. - * @retval The CRC Polynomial register value. - */ -uint16_t SPI_GetCRCPolynomial(SPI_TypeDef* SPIx) -{ - /* Check the parameters */ - assert_param(IS_SPI_ALL_PERIPH(SPIx)); - - /* Return the CRC polynomial register */ - return SPIx->CRCPR; -} - -/** - * @} - */ - -/** @defgroup SPI_Group4 DMA transfers management functions - * @brief DMA transfers management functions - * -@verbatim - =============================================================================== - ##### DMA transfers management functions ##### - =============================================================================== - -@endverbatim - * @{ - */ - -/** - * @brief Enables or disables the SPIx/I2Sx DMA interface. - * @param SPIx: To select the SPIx/I2Sx peripheral, where x can be: 1, 2, 3, 4, 5 or 6 - * in SPI mode or 2 or 3 in I2S mode or I2Sxext for I2S full duplex mode. - * @param SPI_I2S_DMAReq: specifies the SPI DMA transfer request to be enabled or disabled. - * This parameter can be any combination of the following values: - * @arg SPI_I2S_DMAReq_Tx: Tx buffer DMA transfer request - * @arg SPI_I2S_DMAReq_Rx: Rx buffer DMA transfer request - * @param NewState: new state of the selected SPI DMA transfer request. - * This parameter can be: ENABLE or DISABLE. - * @retval None - */ -void SPI_I2S_DMACmd(SPI_TypeDef* SPIx, uint16_t SPI_I2S_DMAReq, FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_SPI_ALL_PERIPH_EXT(SPIx)); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - assert_param(IS_SPI_I2S_DMAREQ(SPI_I2S_DMAReq)); - - if (NewState != DISABLE) - { - /* Enable the selected SPI DMA requests */ - SPIx->CR2 |= SPI_I2S_DMAReq; - } - else - { - /* Disable the selected SPI DMA requests */ - SPIx->CR2 &= (uint16_t)~SPI_I2S_DMAReq; - } -} - -/** - * @} - */ - -/** @defgroup SPI_Group5 Interrupts and flags management functions - * @brief Interrupts and flags management functions - * -@verbatim - =============================================================================== - ##### Interrupts and flags management functions ##### - =============================================================================== - - [..] This section provides a set of functions allowing to configure the SPI Interrupts - sources and check or clear the flags or pending bits status. - The user should identify which mode will be used in his application to manage - the communication: Polling mode, Interrupt mode or DMA mode. - - *** Polling Mode *** - ==================== -[..] In Polling Mode, the SPI/I2S communication can be managed by 9 flags: - (#) SPI_I2S_FLAG_TXE : to indicate the status of the transmit buffer register - (#) SPI_I2S_FLAG_RXNE : to indicate the status of the receive buffer register - (#) SPI_I2S_FLAG_BSY : to indicate the state of the communication layer of the SPI. - (#) SPI_FLAG_CRCERR : to indicate if a CRC Calculation error occur - (#) SPI_FLAG_MODF : to indicate if a Mode Fault error occur - (#) SPI_I2S_FLAG_OVR : to indicate if an Overrun error occur - (#) I2S_FLAG_TIFRFE: to indicate a Frame Format error occurs. - (#) I2S_FLAG_UDR: to indicate an Underrun error occurs. - (#) I2S_FLAG_CHSIDE: to indicate Channel Side. - - (@) Do not use the BSY flag to handle each data transmission or reception. It is - better to use the TXE and RXNE flags instead. - - [..] In this Mode it is advised to use the following functions: - (+) FlagStatus SPI_I2S_GetFlagStatus(SPI_TypeDef* SPIx, uint16_t SPI_I2S_FLAG); - (+) void SPI_I2S_ClearFlag(SPI_TypeDef* SPIx, uint16_t SPI_I2S_FLAG); - - *** Interrupt Mode *** - ====================== - [..] In Interrupt Mode, the SPI communication can be managed by 3 interrupt sources - and 7 pending bits: - (+) Pending Bits: - (##) SPI_I2S_IT_TXE : to indicate the status of the transmit buffer register - (##) SPI_I2S_IT_RXNE : to indicate the status of the receive buffer register - (##) SPI_IT_CRCERR : to indicate if a CRC Calculation error occur (available in SPI mode only) - (##) SPI_IT_MODF : to indicate if a Mode Fault error occur (available in SPI mode only) - (##) SPI_I2S_IT_OVR : to indicate if an Overrun error occur - (##) I2S_IT_UDR : to indicate an Underrun Error occurs (available in I2S mode only). - (##) I2S_FLAG_TIFRFE : to indicate a Frame Format error occurs (available in TI mode only). - - (+) Interrupt Source: - (##) SPI_I2S_IT_TXE: specifies the interrupt source for the Tx buffer empty - interrupt. - (##) SPI_I2S_IT_RXNE : specifies the interrupt source for the Rx buffer not - empty interrupt. - (##) SPI_I2S_IT_ERR : specifies the interrupt source for the errors interrupt. - - [..] In this Mode it is advised to use the following functions: - (+) void SPI_I2S_ITConfig(SPI_TypeDef* SPIx, uint8_t SPI_I2S_IT, FunctionalState NewState); - (+) ITStatus SPI_I2S_GetITStatus(SPI_TypeDef* SPIx, uint8_t SPI_I2S_IT); - (+) void SPI_I2S_ClearITPendingBit(SPI_TypeDef* SPIx, uint8_t SPI_I2S_IT); - - *** DMA Mode *** - ================ - [..] In DMA Mode, the SPI communication can be managed by 2 DMA Channel requests: - (#) SPI_I2S_DMAReq_Tx: specifies the Tx buffer DMA transfer request - (#) SPI_I2S_DMAReq_Rx: specifies the Rx buffer DMA transfer request - - [..] In this Mode it is advised to use the following function: - (+) void SPI_I2S_DMACmd(SPI_TypeDef* SPIx, uint16_t SPI_I2S_DMAReq, FunctionalState - NewState); - -@endverbatim - * @{ - */ - -/** - * @brief Enables or disables the specified SPI/I2S interrupts. - * @param SPIx: To select the SPIx/I2Sx peripheral, where x can be: 1, 2, 3, 4, 5 or 6 - * in SPI mode or 2 or 3 in I2S mode or I2Sxext for I2S full duplex mode. - * @param SPI_I2S_IT: specifies the SPI interrupt source to be enabled or disabled. - * This parameter can be one of the following values: - * @arg SPI_I2S_IT_TXE: Tx buffer empty interrupt mask - * @arg SPI_I2S_IT_RXNE: Rx buffer not empty interrupt mask - * @arg SPI_I2S_IT_ERR: Error interrupt mask - * @param NewState: new state of the specified SPI interrupt. - * This parameter can be: ENABLE or DISABLE. - * @retval None - */ -void SPI_I2S_ITConfig(SPI_TypeDef* SPIx, uint8_t SPI_I2S_IT, FunctionalState NewState) -{ - uint16_t itpos = 0, itmask = 0 ; - - /* Check the parameters */ - assert_param(IS_SPI_ALL_PERIPH_EXT(SPIx)); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - assert_param(IS_SPI_I2S_CONFIG_IT(SPI_I2S_IT)); - - /* Get the SPI IT index */ - itpos = SPI_I2S_IT >> 4; - - /* Set the IT mask */ - itmask = (uint16_t)1 << (uint16_t)itpos; - - if (NewState != DISABLE) - { - /* Enable the selected SPI interrupt */ - SPIx->CR2 |= itmask; - } - else - { - /* Disable the selected SPI interrupt */ - SPIx->CR2 &= (uint16_t)~itmask; - } -} - -/** - * @brief Checks whether the specified SPIx/I2Sx flag is set or not. - * @param SPIx: To select the SPIx/I2Sx peripheral, where x can be: 1, 2, 3, 4, 5 or 6 - * in SPI mode or 2 or 3 in I2S mode or I2Sxext for I2S full duplex mode. - * @param SPI_I2S_FLAG: specifies the SPI flag to check. - * This parameter can be one of the following values: - * @arg SPI_I2S_FLAG_TXE: Transmit buffer empty flag. - * @arg SPI_I2S_FLAG_RXNE: Receive buffer not empty flag. - * @arg SPI_I2S_FLAG_BSY: Busy flag. - * @arg SPI_I2S_FLAG_OVR: Overrun flag. - * @arg SPI_FLAG_MODF: Mode Fault flag. - * @arg SPI_FLAG_CRCERR: CRC Error flag. - * @arg SPI_I2S_FLAG_TIFRFE: Format Error. - * @arg I2S_FLAG_UDR: Underrun Error flag. - * @arg I2S_FLAG_CHSIDE: Channel Side flag. - * @retval The new state of SPI_I2S_FLAG (SET or RESET). - */ -FlagStatus SPI_I2S_GetFlagStatus(SPI_TypeDef* SPIx, uint16_t SPI_I2S_FLAG) -{ - FlagStatus bitstatus = RESET; - /* Check the parameters */ - assert_param(IS_SPI_ALL_PERIPH_EXT(SPIx)); - assert_param(IS_SPI_I2S_GET_FLAG(SPI_I2S_FLAG)); - - /* Check the status of the specified SPI flag */ - if ((SPIx->SR & SPI_I2S_FLAG) != (uint16_t)RESET) - { - /* SPI_I2S_FLAG is set */ - bitstatus = SET; - } - else - { - /* SPI_I2S_FLAG is reset */ - bitstatus = RESET; - } - /* Return the SPI_I2S_FLAG status */ - return bitstatus; -} - -/** - * @brief Clears the SPIx CRC Error (CRCERR) flag. - * @param SPIx: To select the SPIx/I2Sx peripheral, where x can be: 1, 2, 3, 4, 5 or 6 - * in SPI mode or 2 or 3 in I2S mode or I2Sxext for I2S full duplex mode. - * @param SPI_I2S_FLAG: specifies the SPI flag to clear. - * This function clears only CRCERR flag. - * @arg SPI_FLAG_CRCERR: CRC Error flag. - * - * @note OVR (OverRun error) flag is cleared by software sequence: a read - * operation to SPI_DR register (SPI_I2S_ReceiveData()) followed by a read - * operation to SPI_SR register (SPI_I2S_GetFlagStatus()). - * @note UDR (UnderRun error) flag is cleared by a read operation to - * SPI_SR register (SPI_I2S_GetFlagStatus()). - * @note MODF (Mode Fault) flag is cleared by software sequence: a read/write - * operation to SPI_SR register (SPI_I2S_GetFlagStatus()) followed by a - * write operation to SPI_CR1 register (SPI_Cmd() to enable the SPI). - * - * @retval None - */ -void SPI_I2S_ClearFlag(SPI_TypeDef* SPIx, uint16_t SPI_I2S_FLAG) -{ - /* Check the parameters */ - assert_param(IS_SPI_ALL_PERIPH_EXT(SPIx)); - assert_param(IS_SPI_I2S_CLEAR_FLAG(SPI_I2S_FLAG)); - - /* Clear the selected SPI CRC Error (CRCERR) flag */ - SPIx->SR = (uint16_t)~SPI_I2S_FLAG; -} - -/** - * @brief Checks whether the specified SPIx/I2Sx interrupt has occurred or not. - * @param SPIx: To select the SPIx/I2Sx peripheral, where x can be: 1, 2, 3, 4, 5 or 6 - * in SPI mode or 2 or 3 in I2S mode or I2Sxext for I2S full duplex mode. - * @param SPI_I2S_IT: specifies the SPI interrupt source to check. - * This parameter can be one of the following values: - * @arg SPI_I2S_IT_TXE: Transmit buffer empty interrupt. - * @arg SPI_I2S_IT_RXNE: Receive buffer not empty interrupt. - * @arg SPI_I2S_IT_OVR: Overrun interrupt. - * @arg SPI_IT_MODF: Mode Fault interrupt. - * @arg SPI_IT_CRCERR: CRC Error interrupt. - * @arg I2S_IT_UDR: Underrun interrupt. - * @arg SPI_I2S_IT_TIFRFE: Format Error interrupt. - * @retval The new state of SPI_I2S_IT (SET or RESET). - */ -ITStatus SPI_I2S_GetITStatus(SPI_TypeDef* SPIx, uint8_t SPI_I2S_IT) -{ - ITStatus bitstatus = RESET; - uint16_t itpos = 0, itmask = 0, enablestatus = 0; - - /* Check the parameters */ - assert_param(IS_SPI_ALL_PERIPH_EXT(SPIx)); - assert_param(IS_SPI_I2S_GET_IT(SPI_I2S_IT)); - - /* Get the SPI_I2S_IT index */ - itpos = 0x01 << (SPI_I2S_IT & 0x0F); - - /* Get the SPI_I2S_IT IT mask */ - itmask = SPI_I2S_IT >> 4; - - /* Set the IT mask */ - itmask = 0x01 << itmask; - - /* Get the SPI_I2S_IT enable bit status */ - enablestatus = (SPIx->CR2 & itmask) ; - - /* Check the status of the specified SPI interrupt */ - if (((SPIx->SR & itpos) != (uint16_t)RESET) && enablestatus) - { - /* SPI_I2S_IT is set */ - bitstatus = SET; - } - else - { - /* SPI_I2S_IT is reset */ - bitstatus = RESET; - } - /* Return the SPI_I2S_IT status */ - return bitstatus; -} - -/** - * @brief Clears the SPIx CRC Error (CRCERR) interrupt pending bit. - * @param SPIx: To select the SPIx/I2Sx peripheral, where x can be: 1, 2, 3, 4, 5 or 6 - * in SPI mode or 2 or 3 in I2S mode or I2Sxext for I2S full duplex mode. - * @param SPI_I2S_IT: specifies the SPI interrupt pending bit to clear. - * This function clears only CRCERR interrupt pending bit. - * @arg SPI_IT_CRCERR: CRC Error interrupt. - * - * @note OVR (OverRun Error) interrupt pending bit is cleared by software - * sequence: a read operation to SPI_DR register (SPI_I2S_ReceiveData()) - * followed by a read operation to SPI_SR register (SPI_I2S_GetITStatus()). - * @note UDR (UnderRun Error) interrupt pending bit is cleared by a read - * operation to SPI_SR register (SPI_I2S_GetITStatus()). - * @note MODF (Mode Fault) interrupt pending bit is cleared by software sequence: - * a read/write operation to SPI_SR register (SPI_I2S_GetITStatus()) - * followed by a write operation to SPI_CR1 register (SPI_Cmd() to enable - * the SPI). - * @retval None - */ -void SPI_I2S_ClearITPendingBit(SPI_TypeDef* SPIx, uint8_t SPI_I2S_IT) -{ - uint16_t itpos = 0; - /* Check the parameters */ - assert_param(IS_SPI_ALL_PERIPH_EXT(SPIx)); - assert_param(IS_SPI_I2S_CLEAR_IT(SPI_I2S_IT)); - - /* Get the SPI_I2S IT index */ - itpos = 0x01 << (SPI_I2S_IT & 0x0F); - - /* Clear the selected SPI CRC Error (CRCERR) interrupt pending bit */ - SPIx->SR = (uint16_t)~itpos; -} - -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/stm/lib/stm32f4xx_spi.h b/stm/lib/stm32f4xx_spi.h deleted file mode 100644 index 7f4834bfd..000000000 --- a/stm/lib/stm32f4xx_spi.h +++ /dev/null @@ -1,549 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f4xx_spi.h - * @author MCD Application Team - * @version V1.3.0 - * @date 08-November-2013 - * @brief This file contains all the functions prototypes for the SPI - * firmware library. - ****************************************************************************** - * @attention - * - *

© COPYRIGHT 2013 STMicroelectronics

- * - * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License"); - * You may not use this file except in compliance with the License. - * You may obtain a copy of the License at: - * - * http://www.st.com/software_license_agreement_liberty_v2 - * - * Unless required by applicable law or agreed to in writing, software - * distributed under the License is distributed on an "AS IS" BASIS, - * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - * See the License for the specific language governing permissions and - * limitations under the License. - * - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F4xx_SPI_H -#define __STM32F4xx_SPI_H - -#ifdef __cplusplus - extern "C" { -#endif - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx.h" - -/** @addtogroup STM32F4xx_StdPeriph_Driver - * @{ - */ - -/** @addtogroup SPI - * @{ - */ - -/* Exported types ------------------------------------------------------------*/ - -/** - * @brief SPI Init structure definition - */ - -typedef struct -{ - uint16_t SPI_Direction; /*!< Specifies the SPI unidirectional or bidirectional data mode. - This parameter can be a value of @ref SPI_data_direction */ - - uint16_t SPI_Mode; /*!< Specifies the SPI operating mode. - This parameter can be a value of @ref SPI_mode */ - - uint16_t SPI_DataSize; /*!< Specifies the SPI data size. - This parameter can be a value of @ref SPI_data_size */ - - uint16_t SPI_CPOL; /*!< Specifies the serial clock steady state. - This parameter can be a value of @ref SPI_Clock_Polarity */ - - uint16_t SPI_CPHA; /*!< Specifies the clock active edge for the bit capture. - This parameter can be a value of @ref SPI_Clock_Phase */ - - uint16_t SPI_NSS; /*!< Specifies whether the NSS signal is managed by - hardware (NSS pin) or by software using the SSI bit. - This parameter can be a value of @ref SPI_Slave_Select_management */ - - uint16_t SPI_BaudRatePrescaler; /*!< Specifies the Baud Rate prescaler value which will be - used to configure the transmit and receive SCK clock. - This parameter can be a value of @ref SPI_BaudRate_Prescaler - @note The communication clock is derived from the master - clock. The slave clock does not need to be set. */ - - uint16_t SPI_FirstBit; /*!< Specifies whether data transfers start from MSB or LSB bit. - This parameter can be a value of @ref SPI_MSB_LSB_transmission */ - - uint16_t SPI_CRCPolynomial; /*!< Specifies the polynomial used for the CRC calculation. */ -}SPI_InitTypeDef; - -/** - * @brief I2S Init structure definition - */ - -typedef struct -{ - - uint16_t I2S_Mode; /*!< Specifies the I2S operating mode. - This parameter can be a value of @ref I2S_Mode */ - - uint16_t I2S_Standard; /*!< Specifies the standard used for the I2S communication. - This parameter can be a value of @ref I2S_Standard */ - - uint16_t I2S_DataFormat; /*!< Specifies the data format for the I2S communication. - This parameter can be a value of @ref I2S_Data_Format */ - - uint16_t I2S_MCLKOutput; /*!< Specifies whether the I2S MCLK output is enabled or not. - This parameter can be a value of @ref I2S_MCLK_Output */ - - uint32_t I2S_AudioFreq; /*!< Specifies the frequency selected for the I2S communication. - This parameter can be a value of @ref I2S_Audio_Frequency */ - - uint16_t I2S_CPOL; /*!< Specifies the idle state of the I2S clock. - This parameter can be a value of @ref I2S_Clock_Polarity */ -}I2S_InitTypeDef; - -/* Exported constants --------------------------------------------------------*/ - -/** @defgroup SPI_Exported_Constants - * @{ - */ - -#define IS_SPI_ALL_PERIPH(PERIPH) (((PERIPH) == SPI1) || \ - ((PERIPH) == SPI2) || \ - ((PERIPH) == SPI3) || \ - ((PERIPH) == SPI4) || \ - ((PERIPH) == SPI5) || \ - ((PERIPH) == SPI6)) - -#define IS_SPI_ALL_PERIPH_EXT(PERIPH) (((PERIPH) == SPI1) || \ - ((PERIPH) == SPI2) || \ - ((PERIPH) == SPI3) || \ - ((PERIPH) == SPI4) || \ - ((PERIPH) == SPI5) || \ - ((PERIPH) == SPI6) || \ - ((PERIPH) == I2S2ext) || \ - ((PERIPH) == I2S3ext)) - -#define IS_SPI_23_PERIPH(PERIPH) (((PERIPH) == SPI2) || \ - ((PERIPH) == SPI3)) - -#define IS_SPI_23_PERIPH_EXT(PERIPH) (((PERIPH) == SPI2) || \ - ((PERIPH) == SPI3) || \ - ((PERIPH) == I2S2ext) || \ - ((PERIPH) == I2S3ext)) - -#define IS_I2S_EXT_PERIPH(PERIPH) (((PERIPH) == I2S2ext) || \ - ((PERIPH) == I2S3ext)) - - -/** @defgroup SPI_data_direction - * @{ - */ - -#define SPI_Direction_2Lines_FullDuplex ((uint16_t)0x0000) -#define SPI_Direction_2Lines_RxOnly ((uint16_t)0x0400) -#define SPI_Direction_1Line_Rx ((uint16_t)0x8000) -#define SPI_Direction_1Line_Tx ((uint16_t)0xC000) -#define IS_SPI_DIRECTION_MODE(MODE) (((MODE) == SPI_Direction_2Lines_FullDuplex) || \ - ((MODE) == SPI_Direction_2Lines_RxOnly) || \ - ((MODE) == SPI_Direction_1Line_Rx) || \ - ((MODE) == SPI_Direction_1Line_Tx)) -/** - * @} - */ - -/** @defgroup SPI_mode - * @{ - */ - -#define SPI_Mode_Master ((uint16_t)0x0104) -#define SPI_Mode_Slave ((uint16_t)0x0000) -#define IS_SPI_MODE(MODE) (((MODE) == SPI_Mode_Master) || \ - ((MODE) == SPI_Mode_Slave)) -/** - * @} - */ - -/** @defgroup SPI_data_size - * @{ - */ - -#define SPI_DataSize_16b ((uint16_t)0x0800) -#define SPI_DataSize_8b ((uint16_t)0x0000) -#define IS_SPI_DATASIZE(DATASIZE) (((DATASIZE) == SPI_DataSize_16b) || \ - ((DATASIZE) == SPI_DataSize_8b)) -/** - * @} - */ - -/** @defgroup SPI_Clock_Polarity - * @{ - */ - -#define SPI_CPOL_Low ((uint16_t)0x0000) -#define SPI_CPOL_High ((uint16_t)0x0002) -#define IS_SPI_CPOL(CPOL) (((CPOL) == SPI_CPOL_Low) || \ - ((CPOL) == SPI_CPOL_High)) -/** - * @} - */ - -/** @defgroup SPI_Clock_Phase - * @{ - */ - -#define SPI_CPHA_1Edge ((uint16_t)0x0000) -#define SPI_CPHA_2Edge ((uint16_t)0x0001) -#define IS_SPI_CPHA(CPHA) (((CPHA) == SPI_CPHA_1Edge) || \ - ((CPHA) == SPI_CPHA_2Edge)) -/** - * @} - */ - -/** @defgroup SPI_Slave_Select_management - * @{ - */ - -#define SPI_NSS_Soft ((uint16_t)0x0200) -#define SPI_NSS_Hard ((uint16_t)0x0000) -#define IS_SPI_NSS(NSS) (((NSS) == SPI_NSS_Soft) || \ - ((NSS) == SPI_NSS_Hard)) -/** - * @} - */ - -/** @defgroup SPI_BaudRate_Prescaler - * @{ - */ - -#define SPI_BaudRatePrescaler_2 ((uint16_t)0x0000) -#define SPI_BaudRatePrescaler_4 ((uint16_t)0x0008) -#define SPI_BaudRatePrescaler_8 ((uint16_t)0x0010) -#define SPI_BaudRatePrescaler_16 ((uint16_t)0x0018) -#define SPI_BaudRatePrescaler_32 ((uint16_t)0x0020) -#define SPI_BaudRatePrescaler_64 ((uint16_t)0x0028) -#define SPI_BaudRatePrescaler_128 ((uint16_t)0x0030) -#define SPI_BaudRatePrescaler_256 ((uint16_t)0x0038) -#define IS_SPI_BAUDRATE_PRESCALER(PRESCALER) (((PRESCALER) == SPI_BaudRatePrescaler_2) || \ - ((PRESCALER) == SPI_BaudRatePrescaler_4) || \ - ((PRESCALER) == SPI_BaudRatePrescaler_8) || \ - ((PRESCALER) == SPI_BaudRatePrescaler_16) || \ - ((PRESCALER) == SPI_BaudRatePrescaler_32) || \ - ((PRESCALER) == SPI_BaudRatePrescaler_64) || \ - ((PRESCALER) == SPI_BaudRatePrescaler_128) || \ - ((PRESCALER) == SPI_BaudRatePrescaler_256)) -/** - * @} - */ - -/** @defgroup SPI_MSB_LSB_transmission - * @{ - */ - -#define SPI_FirstBit_MSB ((uint16_t)0x0000) -#define SPI_FirstBit_LSB ((uint16_t)0x0080) -#define IS_SPI_FIRST_BIT(BIT) (((BIT) == SPI_FirstBit_MSB) || \ - ((BIT) == SPI_FirstBit_LSB)) -/** - * @} - */ - -/** @defgroup SPI_I2S_Mode - * @{ - */ - -#define I2S_Mode_SlaveTx ((uint16_t)0x0000) -#define I2S_Mode_SlaveRx ((uint16_t)0x0100) -#define I2S_Mode_MasterTx ((uint16_t)0x0200) -#define I2S_Mode_MasterRx ((uint16_t)0x0300) -#define IS_I2S_MODE(MODE) (((MODE) == I2S_Mode_SlaveTx) || \ - ((MODE) == I2S_Mode_SlaveRx) || \ - ((MODE) == I2S_Mode_MasterTx)|| \ - ((MODE) == I2S_Mode_MasterRx)) -/** - * @} - */ - - -/** @defgroup SPI_I2S_Standard - * @{ - */ - -#define I2S_Standard_Phillips ((uint16_t)0x0000) -#define I2S_Standard_MSB ((uint16_t)0x0010) -#define I2S_Standard_LSB ((uint16_t)0x0020) -#define I2S_Standard_PCMShort ((uint16_t)0x0030) -#define I2S_Standard_PCMLong ((uint16_t)0x00B0) -#define IS_I2S_STANDARD(STANDARD) (((STANDARD) == I2S_Standard_Phillips) || \ - ((STANDARD) == I2S_Standard_MSB) || \ - ((STANDARD) == I2S_Standard_LSB) || \ - ((STANDARD) == I2S_Standard_PCMShort) || \ - ((STANDARD) == I2S_Standard_PCMLong)) -/** - * @} - */ - -/** @defgroup SPI_I2S_Data_Format - * @{ - */ - -#define I2S_DataFormat_16b ((uint16_t)0x0000) -#define I2S_DataFormat_16bextended ((uint16_t)0x0001) -#define I2S_DataFormat_24b ((uint16_t)0x0003) -#define I2S_DataFormat_32b ((uint16_t)0x0005) -#define IS_I2S_DATA_FORMAT(FORMAT) (((FORMAT) == I2S_DataFormat_16b) || \ - ((FORMAT) == I2S_DataFormat_16bextended) || \ - ((FORMAT) == I2S_DataFormat_24b) || \ - ((FORMAT) == I2S_DataFormat_32b)) -/** - * @} - */ - -/** @defgroup SPI_I2S_MCLK_Output - * @{ - */ - -#define I2S_MCLKOutput_Enable ((uint16_t)0x0200) -#define I2S_MCLKOutput_Disable ((uint16_t)0x0000) -#define IS_I2S_MCLK_OUTPUT(OUTPUT) (((OUTPUT) == I2S_MCLKOutput_Enable) || \ - ((OUTPUT) == I2S_MCLKOutput_Disable)) -/** - * @} - */ - -/** @defgroup SPI_I2S_Audio_Frequency - * @{ - */ - -#define I2S_AudioFreq_192k ((uint32_t)192000) -#define I2S_AudioFreq_96k ((uint32_t)96000) -#define I2S_AudioFreq_48k ((uint32_t)48000) -#define I2S_AudioFreq_44k ((uint32_t)44100) -#define I2S_AudioFreq_32k ((uint32_t)32000) -#define I2S_AudioFreq_22k ((uint32_t)22050) -#define I2S_AudioFreq_16k ((uint32_t)16000) -#define I2S_AudioFreq_11k ((uint32_t)11025) -#define I2S_AudioFreq_8k ((uint32_t)8000) -#define I2S_AudioFreq_Default ((uint32_t)2) - -#define IS_I2S_AUDIO_FREQ(FREQ) ((((FREQ) >= I2S_AudioFreq_8k) && \ - ((FREQ) <= I2S_AudioFreq_192k)) || \ - ((FREQ) == I2S_AudioFreq_Default)) -/** - * @} - */ - -/** @defgroup SPI_I2S_Clock_Polarity - * @{ - */ - -#define I2S_CPOL_Low ((uint16_t)0x0000) -#define I2S_CPOL_High ((uint16_t)0x0008) -#define IS_I2S_CPOL(CPOL) (((CPOL) == I2S_CPOL_Low) || \ - ((CPOL) == I2S_CPOL_High)) -/** - * @} - */ - -/** @defgroup SPI_I2S_DMA_transfer_requests - * @{ - */ - -#define SPI_I2S_DMAReq_Tx ((uint16_t)0x0002) -#define SPI_I2S_DMAReq_Rx ((uint16_t)0x0001) -#define IS_SPI_I2S_DMAREQ(DMAREQ) ((((DMAREQ) & (uint16_t)0xFFFC) == 0x00) && ((DMAREQ) != 0x00)) -/** - * @} - */ - -/** @defgroup SPI_NSS_internal_software_management - * @{ - */ - -#define SPI_NSSInternalSoft_Set ((uint16_t)0x0100) -#define SPI_NSSInternalSoft_Reset ((uint16_t)0xFEFF) -#define IS_SPI_NSS_INTERNAL(INTERNAL) (((INTERNAL) == SPI_NSSInternalSoft_Set) || \ - ((INTERNAL) == SPI_NSSInternalSoft_Reset)) -/** - * @} - */ - -/** @defgroup SPI_CRC_Transmit_Receive - * @{ - */ - -#define SPI_CRC_Tx ((uint8_t)0x00) -#define SPI_CRC_Rx ((uint8_t)0x01) -#define IS_SPI_CRC(CRC) (((CRC) == SPI_CRC_Tx) || ((CRC) == SPI_CRC_Rx)) -/** - * @} - */ - -/** @defgroup SPI_direction_transmit_receive - * @{ - */ - -#define SPI_Direction_Rx ((uint16_t)0xBFFF) -#define SPI_Direction_Tx ((uint16_t)0x4000) -#define IS_SPI_DIRECTION(DIRECTION) (((DIRECTION) == SPI_Direction_Rx) || \ - ((DIRECTION) == SPI_Direction_Tx)) -/** - * @} - */ - -/** @defgroup SPI_I2S_interrupts_definition - * @{ - */ - -#define SPI_I2S_IT_TXE ((uint8_t)0x71) -#define SPI_I2S_IT_RXNE ((uint8_t)0x60) -#define SPI_I2S_IT_ERR ((uint8_t)0x50) -#define I2S_IT_UDR ((uint8_t)0x53) -#define SPI_I2S_IT_TIFRFE ((uint8_t)0x58) - -#define IS_SPI_I2S_CONFIG_IT(IT) (((IT) == SPI_I2S_IT_TXE) || \ - ((IT) == SPI_I2S_IT_RXNE) || \ - ((IT) == SPI_I2S_IT_ERR)) - -#define SPI_I2S_IT_OVR ((uint8_t)0x56) -#define SPI_IT_MODF ((uint8_t)0x55) -#define SPI_IT_CRCERR ((uint8_t)0x54) - -#define IS_SPI_I2S_CLEAR_IT(IT) (((IT) == SPI_IT_CRCERR)) - -#define IS_SPI_I2S_GET_IT(IT) (((IT) == SPI_I2S_IT_RXNE)|| ((IT) == SPI_I2S_IT_TXE) || \ - ((IT) == SPI_IT_CRCERR) || ((IT) == SPI_IT_MODF) || \ - ((IT) == SPI_I2S_IT_OVR) || ((IT) == I2S_IT_UDR) ||\ - ((IT) == SPI_I2S_IT_TIFRFE)) -/** - * @} - */ - -/** @defgroup SPI_I2S_flags_definition - * @{ - */ - -#define SPI_I2S_FLAG_RXNE ((uint16_t)0x0001) -#define SPI_I2S_FLAG_TXE ((uint16_t)0x0002) -#define I2S_FLAG_CHSIDE ((uint16_t)0x0004) -#define I2S_FLAG_UDR ((uint16_t)0x0008) -#define SPI_FLAG_CRCERR ((uint16_t)0x0010) -#define SPI_FLAG_MODF ((uint16_t)0x0020) -#define SPI_I2S_FLAG_OVR ((uint16_t)0x0040) -#define SPI_I2S_FLAG_BSY ((uint16_t)0x0080) -#define SPI_I2S_FLAG_TIFRFE ((uint16_t)0x0100) - -#define IS_SPI_I2S_CLEAR_FLAG(FLAG) (((FLAG) == SPI_FLAG_CRCERR)) -#define IS_SPI_I2S_GET_FLAG(FLAG) (((FLAG) == SPI_I2S_FLAG_BSY) || ((FLAG) == SPI_I2S_FLAG_OVR) || \ - ((FLAG) == SPI_FLAG_MODF) || ((FLAG) == SPI_FLAG_CRCERR) || \ - ((FLAG) == I2S_FLAG_UDR) || ((FLAG) == I2S_FLAG_CHSIDE) || \ - ((FLAG) == SPI_I2S_FLAG_TXE) || ((FLAG) == SPI_I2S_FLAG_RXNE)|| \ - ((FLAG) == SPI_I2S_FLAG_TIFRFE)) -/** - * @} - */ - -/** @defgroup SPI_CRC_polynomial - * @{ - */ - -#define IS_SPI_CRC_POLYNOMIAL(POLYNOMIAL) ((POLYNOMIAL) >= 0x1) -/** - * @} - */ - -/** @defgroup SPI_I2S_Legacy - * @{ - */ - -#define SPI_DMAReq_Tx SPI_I2S_DMAReq_Tx -#define SPI_DMAReq_Rx SPI_I2S_DMAReq_Rx -#define SPI_IT_TXE SPI_I2S_IT_TXE -#define SPI_IT_RXNE SPI_I2S_IT_RXNE -#define SPI_IT_ERR SPI_I2S_IT_ERR -#define SPI_IT_OVR SPI_I2S_IT_OVR -#define SPI_FLAG_RXNE SPI_I2S_FLAG_RXNE -#define SPI_FLAG_TXE SPI_I2S_FLAG_TXE -#define SPI_FLAG_OVR SPI_I2S_FLAG_OVR -#define SPI_FLAG_BSY SPI_I2S_FLAG_BSY -#define SPI_DeInit SPI_I2S_DeInit -#define SPI_ITConfig SPI_I2S_ITConfig -#define SPI_DMACmd SPI_I2S_DMACmd -#define SPI_SendData SPI_I2S_SendData -#define SPI_ReceiveData SPI_I2S_ReceiveData -#define SPI_GetFlagStatus SPI_I2S_GetFlagStatus -#define SPI_ClearFlag SPI_I2S_ClearFlag -#define SPI_GetITStatus SPI_I2S_GetITStatus -#define SPI_ClearITPendingBit SPI_I2S_ClearITPendingBit -/** - * @} - */ - -/** - * @} - */ - -/* Exported macro ------------------------------------------------------------*/ -/* Exported functions --------------------------------------------------------*/ - -/* Function used to set the SPI configuration to the default reset state *****/ -void SPI_I2S_DeInit(SPI_TypeDef* SPIx); - -/* Initialization and Configuration functions *********************************/ -void SPI_Init(SPI_TypeDef* SPIx, SPI_InitTypeDef* SPI_InitStruct); -void I2S_Init(SPI_TypeDef* SPIx, I2S_InitTypeDef* I2S_InitStruct); -void SPI_StructInit(SPI_InitTypeDef* SPI_InitStruct); -void I2S_StructInit(I2S_InitTypeDef* I2S_InitStruct); -void SPI_Cmd(SPI_TypeDef* SPIx, FunctionalState NewState); -void I2S_Cmd(SPI_TypeDef* SPIx, FunctionalState NewState); -void SPI_DataSizeConfig(SPI_TypeDef* SPIx, uint16_t SPI_DataSize); -void SPI_BiDirectionalLineConfig(SPI_TypeDef* SPIx, uint16_t SPI_Direction); -void SPI_NSSInternalSoftwareConfig(SPI_TypeDef* SPIx, uint16_t SPI_NSSInternalSoft); -void SPI_SSOutputCmd(SPI_TypeDef* SPIx, FunctionalState NewState); -void SPI_TIModeCmd(SPI_TypeDef* SPIx, FunctionalState NewState); - -void I2S_FullDuplexConfig(SPI_TypeDef* I2Sxext, I2S_InitTypeDef* I2S_InitStruct); - -/* Data transfers functions ***************************************************/ -void SPI_I2S_SendData(SPI_TypeDef* SPIx, uint16_t Data); -uint16_t SPI_I2S_ReceiveData(SPI_TypeDef* SPIx); - -/* Hardware CRC Calculation functions *****************************************/ -void SPI_CalculateCRC(SPI_TypeDef* SPIx, FunctionalState NewState); -void SPI_TransmitCRC(SPI_TypeDef* SPIx); -uint16_t SPI_GetCRC(SPI_TypeDef* SPIx, uint8_t SPI_CRC); -uint16_t SPI_GetCRCPolynomial(SPI_TypeDef* SPIx); - -/* DMA transfers management functions *****************************************/ -void SPI_I2S_DMACmd(SPI_TypeDef* SPIx, uint16_t SPI_I2S_DMAReq, FunctionalState NewState); - -/* Interrupts and flags management functions **********************************/ -void SPI_I2S_ITConfig(SPI_TypeDef* SPIx, uint8_t SPI_I2S_IT, FunctionalState NewState); -FlagStatus SPI_I2S_GetFlagStatus(SPI_TypeDef* SPIx, uint16_t SPI_I2S_FLAG); -void SPI_I2S_ClearFlag(SPI_TypeDef* SPIx, uint16_t SPI_I2S_FLAG); -ITStatus SPI_I2S_GetITStatus(SPI_TypeDef* SPIx, uint8_t SPI_I2S_IT); -void SPI_I2S_ClearITPendingBit(SPI_TypeDef* SPIx, uint8_t SPI_I2S_IT); - -#ifdef __cplusplus -} -#endif - -#endif /*__STM32F4xx_SPI_H */ - -/** - * @} - */ - -/** - * @} - */ - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/stm/lib/stm32f4xx_syscfg.c b/stm/lib/stm32f4xx_syscfg.c deleted file mode 100644 index 638f76115..000000000 --- a/stm/lib/stm32f4xx_syscfg.c +++ /dev/null @@ -1,240 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f4xx_syscfg.c - * @author MCD Application Team - * @version V1.3.0 - * @date 08-November-2013 - * @brief This file provides firmware functions to manage the SYSCFG peripheral. - * - @verbatim - - =============================================================================== - ##### How to use this driver ##### - =============================================================================== - [..] This driver provides functions for: - - (#) Remapping the memory accessible in the code area using SYSCFG_MemoryRemapConfig() - - (#) Swapping the internal flash Bank1 and Bank2 this features is only visible for - STM32F42xxx/43xxx devices Devices. - - (#) Manage the EXTI lines connection to the GPIOs using SYSCFG_EXTILineConfig() - - (#) Select the ETHERNET media interface (RMII/RII) using SYSCFG_ETH_MediaInterfaceConfig() - - -@- SYSCFG APB clock must be enabled to get write access to SYSCFG registers, - using RCC_APB2PeriphClockCmd(RCC_APB2Periph_SYSCFG, ENABLE); - - @endverbatim - ****************************************************************************** - * @attention - * - *

© COPYRIGHT 2013 STMicroelectronics

- * - * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License"); - * You may not use this file except in compliance with the License. - * You may obtain a copy of the License at: - * - * http://www.st.com/software_license_agreement_liberty_v2 - * - * Unless required by applicable law or agreed to in writing, software - * distributed under the License is distributed on an "AS IS" BASIS, - * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - * See the License for the specific language governing permissions and - * limitations under the License. - * - ****************************************************************************** - */ - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx_syscfg.h" -#include "stm32f4xx_rcc.h" - -/** @addtogroup STM32F4xx_StdPeriph_Driver - * @{ - */ - -/** @defgroup SYSCFG - * @brief SYSCFG driver modules - * @{ - */ - -/* Private typedef -----------------------------------------------------------*/ -/* Private define ------------------------------------------------------------*/ -/* ------------ RCC registers bit address in the alias region ----------- */ -#define SYSCFG_OFFSET (SYSCFG_BASE - PERIPH_BASE) -/* --- MEMRMP Register ---*/ -/* Alias word address of UFB_MODE bit */ -#define MEMRMP_OFFSET SYSCFG_OFFSET -#define UFB_MODE_BitNumber ((uint8_t)0x8) -#define UFB_MODE_BB (PERIPH_BB_BASE + (MEMRMP_OFFSET * 32) + (UFB_MODE_BitNumber * 4)) - - -/* --- PMC Register ---*/ -/* Alias word address of MII_RMII_SEL bit */ -#define PMC_OFFSET (SYSCFG_OFFSET + 0x04) -#define MII_RMII_SEL_BitNumber ((uint8_t)0x17) -#define PMC_MII_RMII_SEL_BB (PERIPH_BB_BASE + (PMC_OFFSET * 32) + (MII_RMII_SEL_BitNumber * 4)) - -/* --- CMPCR Register ---*/ -/* Alias word address of CMP_PD bit */ -#define CMPCR_OFFSET (SYSCFG_OFFSET + 0x20) -#define CMP_PD_BitNumber ((uint8_t)0x00) -#define CMPCR_CMP_PD_BB (PERIPH_BB_BASE + (CMPCR_OFFSET * 32) + (CMP_PD_BitNumber * 4)) - -/* Private macro -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -/* Private function prototypes -----------------------------------------------*/ -/* Private functions ---------------------------------------------------------*/ - -/** @defgroup SYSCFG_Private_Functions - * @{ - */ - -/** - * @brief Deinitializes the Alternate Functions (remap and EXTI configuration) - * registers to their default reset values. - * @param None - * @retval None - */ -void SYSCFG_DeInit(void) -{ - RCC_APB2PeriphResetCmd(RCC_APB2Periph_SYSCFG, ENABLE); - RCC_APB2PeriphResetCmd(RCC_APB2Periph_SYSCFG, DISABLE); -} - -/** - * @brief Changes the mapping of the specified pin. - * @param SYSCFG_Memory: selects the memory remapping. - * This parameter can be one of the following values: - * @arg SYSCFG_MemoryRemap_Flash: Main Flash memory mapped at 0x00000000 - * @arg SYSCFG_MemoryRemap_SystemFlash: System Flash memory mapped at 0x00000000 - * @arg SYSCFG_MemoryRemap_FSMC: FSMC (Bank1 (NOR/PSRAM 1 and 2) mapped at 0x00000000 for STM32F405xx/407xx and STM32F415xx/417xx devices. - * @arg SYSCFG_MemoryRemap_FMC: FMC (Bank1 (NOR/PSRAM 1 and 2) mapped at 0x00000000 for STM32F42xxx/43xxx devices. - * @arg SYSCFG_MemoryRemap_SRAM: Embedded SRAM (112kB) mapped at 0x00000000 - * @arg SYSCFG_MemoryRemap_SDRAM: FMC (External SDRAM) mapped at 0x00000000 for STM32F42xxx/43xxx devices. - * @retval None - */ -void SYSCFG_MemoryRemapConfig(uint8_t SYSCFG_MemoryRemap) -{ - /* Check the parameters */ - assert_param(IS_SYSCFG_MEMORY_REMAP_CONFING(SYSCFG_MemoryRemap)); - - SYSCFG->MEMRMP = SYSCFG_MemoryRemap; -} - -/** - * @brief Enables or disables the Interal FLASH Bank Swapping. - * - * @note This function can be used only for STM32F42xxx/43xxx devices. - * - * @param NewState: new state of Interal FLASH Bank swapping. - * This parameter can be one of the following values: - * @arg ENABLE: Flash Bank2 mapped at 0x08000000 (and aliased @0x00000000) - * and Flash Bank1 mapped at 0x08100000 (and aliased at 0x00100000) - * @arg DISABLE:(the default state) Flash Bank1 mapped at 0x08000000 (and aliased @0x0000 0000) - and Flash Bank2 mapped at 0x08100000 (and aliased at 0x00100000) - * @retval None - */ -void SYSCFG_MemorySwappingBank(FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_FUNCTIONAL_STATE(NewState)); - - *(__IO uint32_t *) UFB_MODE_BB = (uint32_t)NewState; -} - -/** - * @brief Selects the GPIO pin used as EXTI Line. - * @param EXTI_PortSourceGPIOx : selects the GPIO port to be used as source for - * EXTI lines where x can be (A..K) for STM32F42xxx/43xxx devices, (A..I) - * for STM32F405xx/407xx and STM32F415xx/417xx devices or (A, B, C, D and H) - * for STM32401xx devices. - * - * @param EXTI_PinSourcex: specifies the EXTI line to be configured. - * This parameter can be EXTI_PinSourcex where x can be (0..15, except - * for EXTI_PortSourceGPIOI x can be (0..11) for STM32F405xx/407xx - * and STM32F405xx/407xx devices and for EXTI_PortSourceGPIOK x can - * be (0..7) for STM32F42xxx/43xxx devices. - * - * @retval None - */ -void SYSCFG_EXTILineConfig(uint8_t EXTI_PortSourceGPIOx, uint8_t EXTI_PinSourcex) -{ - uint32_t tmp = 0x00; - - /* Check the parameters */ - assert_param(IS_EXTI_PORT_SOURCE(EXTI_PortSourceGPIOx)); - assert_param(IS_EXTI_PIN_SOURCE(EXTI_PinSourcex)); - - tmp = ((uint32_t)0x0F) << (0x04 * (EXTI_PinSourcex & (uint8_t)0x03)); - SYSCFG->EXTICR[EXTI_PinSourcex >> 0x02] &= ~tmp; - SYSCFG->EXTICR[EXTI_PinSourcex >> 0x02] |= (((uint32_t)EXTI_PortSourceGPIOx) << (0x04 * (EXTI_PinSourcex & (uint8_t)0x03))); -} - -/** - * @brief Selects the ETHERNET media interface - * @param SYSCFG_ETH_MediaInterface: specifies the Media Interface mode. - * This parameter can be one of the following values: - * @arg SYSCFG_ETH_MediaInterface_MII: MII mode selected - * @arg SYSCFG_ETH_MediaInterface_RMII: RMII mode selected - * @retval None - */ -void SYSCFG_ETH_MediaInterfaceConfig(uint32_t SYSCFG_ETH_MediaInterface) -{ - assert_param(IS_SYSCFG_ETH_MEDIA_INTERFACE(SYSCFG_ETH_MediaInterface)); - /* Configure MII_RMII selection bit */ - *(__IO uint32_t *) PMC_MII_RMII_SEL_BB = SYSCFG_ETH_MediaInterface; -} - -/** - * @brief Enables or disables the I/O Compensation Cell. - * @note The I/O compensation cell can be used only when the device supply - * voltage ranges from 2.4 to 3.6 V. - * @param NewState: new state of the I/O Compensation Cell. - * This parameter can be one of the following values: - * @arg ENABLE: I/O compensation cell enabled - * @arg DISABLE: I/O compensation cell power-down mode - * @retval None - */ -void SYSCFG_CompensationCellCmd(FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_FUNCTIONAL_STATE(NewState)); - - *(__IO uint32_t *) CMPCR_CMP_PD_BB = (uint32_t)NewState; -} - -/** - * @brief Checks whether the I/O Compensation Cell ready flag is set or not. - * @param None - * @retval The new state of the I/O Compensation Cell ready flag (SET or RESET) - */ -FlagStatus SYSCFG_GetCompensationCellStatus(void) -{ - FlagStatus bitstatus = RESET; - - if ((SYSCFG->CMPCR & SYSCFG_CMPCR_READY ) != (uint32_t)RESET) - { - bitstatus = SET; - } - else - { - bitstatus = RESET; - } - return bitstatus; -} - -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/stm/lib/stm32f4xx_syscfg.h b/stm/lib/stm32f4xx_syscfg.h deleted file mode 100644 index 7d3cc4288..000000000 --- a/stm/lib/stm32f4xx_syscfg.h +++ /dev/null @@ -1,210 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f4xx_syscfg.h - * @author MCD Application Team - * @version V1.3.0 - * @date 08-November-2013 - * @brief This file contains all the functions prototypes for the SYSCFG firmware - * library. - ****************************************************************************** - * @attention - * - *

© COPYRIGHT 2013 STMicroelectronics

- * - * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License"); - * You may not use this file except in compliance with the License. - * You may obtain a copy of the License at: - * - * http://www.st.com/software_license_agreement_liberty_v2 - * - * Unless required by applicable law or agreed to in writing, software - * distributed under the License is distributed on an "AS IS" BASIS, - * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - * See the License for the specific language governing permissions and - * limitations under the License. - * - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F4xx_SYSCFG_H -#define __STM32F4xx_SYSCFG_H - -#ifdef __cplusplus - extern "C" { -#endif - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx.h" - -/** @addtogroup STM32F4xx_StdPeriph_Driver - * @{ - */ - -/** @addtogroup SYSCFG - * @{ - */ - -/* Exported types ------------------------------------------------------------*/ -/* Exported constants --------------------------------------------------------*/ - -/** @defgroup SYSCFG_Exported_Constants - * @{ - */ - -/** @defgroup SYSCFG_EXTI_Port_Sources - * @{ - */ -#define EXTI_PortSourceGPIOA ((uint8_t)0x00) -#define EXTI_PortSourceGPIOB ((uint8_t)0x01) -#define EXTI_PortSourceGPIOC ((uint8_t)0x02) -#define EXTI_PortSourceGPIOD ((uint8_t)0x03) -#define EXTI_PortSourceGPIOE ((uint8_t)0x04) -#define EXTI_PortSourceGPIOF ((uint8_t)0x05) -#define EXTI_PortSourceGPIOG ((uint8_t)0x06) -#define EXTI_PortSourceGPIOH ((uint8_t)0x07) -#define EXTI_PortSourceGPIOI ((uint8_t)0x08) -#define EXTI_PortSourceGPIOJ ((uint8_t)0x09) -#define EXTI_PortSourceGPIOK ((uint8_t)0x0A) - -#define IS_EXTI_PORT_SOURCE(PORTSOURCE) (((PORTSOURCE) == EXTI_PortSourceGPIOA) || \ - ((PORTSOURCE) == EXTI_PortSourceGPIOB) || \ - ((PORTSOURCE) == EXTI_PortSourceGPIOC) || \ - ((PORTSOURCE) == EXTI_PortSourceGPIOD) || \ - ((PORTSOURCE) == EXTI_PortSourceGPIOE) || \ - ((PORTSOURCE) == EXTI_PortSourceGPIOF) || \ - ((PORTSOURCE) == EXTI_PortSourceGPIOG) || \ - ((PORTSOURCE) == EXTI_PortSourceGPIOH) || \ - ((PORTSOURCE) == EXTI_PortSourceGPIOI) || \ - ((PORTSOURCE) == EXTI_PortSourceGPIOJ) || \ - ((PORTSOURCE) == EXTI_PortSourceGPIOK)) - -/** - * @} - */ - - -/** @defgroup SYSCFG_EXTI_Pin_Sources - * @{ - */ -#define EXTI_PinSource0 ((uint8_t)0x00) -#define EXTI_PinSource1 ((uint8_t)0x01) -#define EXTI_PinSource2 ((uint8_t)0x02) -#define EXTI_PinSource3 ((uint8_t)0x03) -#define EXTI_PinSource4 ((uint8_t)0x04) -#define EXTI_PinSource5 ((uint8_t)0x05) -#define EXTI_PinSource6 ((uint8_t)0x06) -#define EXTI_PinSource7 ((uint8_t)0x07) -#define EXTI_PinSource8 ((uint8_t)0x08) -#define EXTI_PinSource9 ((uint8_t)0x09) -#define EXTI_PinSource10 ((uint8_t)0x0A) -#define EXTI_PinSource11 ((uint8_t)0x0B) -#define EXTI_PinSource12 ((uint8_t)0x0C) -#define EXTI_PinSource13 ((uint8_t)0x0D) -#define EXTI_PinSource14 ((uint8_t)0x0E) -#define EXTI_PinSource15 ((uint8_t)0x0F) -#define IS_EXTI_PIN_SOURCE(PINSOURCE) (((PINSOURCE) == EXTI_PinSource0) || \ - ((PINSOURCE) == EXTI_PinSource1) || \ - ((PINSOURCE) == EXTI_PinSource2) || \ - ((PINSOURCE) == EXTI_PinSource3) || \ - ((PINSOURCE) == EXTI_PinSource4) || \ - ((PINSOURCE) == EXTI_PinSource5) || \ - ((PINSOURCE) == EXTI_PinSource6) || \ - ((PINSOURCE) == EXTI_PinSource7) || \ - ((PINSOURCE) == EXTI_PinSource8) || \ - ((PINSOURCE) == EXTI_PinSource9) || \ - ((PINSOURCE) == EXTI_PinSource10) || \ - ((PINSOURCE) == EXTI_PinSource11) || \ - ((PINSOURCE) == EXTI_PinSource12) || \ - ((PINSOURCE) == EXTI_PinSource13) || \ - ((PINSOURCE) == EXTI_PinSource14) || \ - ((PINSOURCE) == EXTI_PinSource15)) -/** - * @} - */ - - -/** @defgroup SYSCFG_Memory_Remap_Config - * @{ - */ -#define SYSCFG_MemoryRemap_Flash ((uint8_t)0x00) -#define SYSCFG_MemoryRemap_SystemFlash ((uint8_t)0x01) -#define SYSCFG_MemoryRemap_SRAM ((uint8_t)0x03) -#define SYSCFG_MemoryRemap_SDRAM ((uint8_t)0x04) - -#if defined (STM32F40_41xxx) -#define SYSCFG_MemoryRemap_FSMC ((uint8_t)0x02) -#endif /* STM32F40_41xxx */ - -#if defined (STM32F427_437xx) || defined (STM32F429_439xx) -#define SYSCFG_MemoryRemap_FMC ((uint8_t)0x02) -#endif /* STM32F427_437xx || STM32F429_439xx */ - -#if defined (STM32F40_41xxx) -#define IS_SYSCFG_MEMORY_REMAP_CONFING(REMAP) (((REMAP) == SYSCFG_MemoryRemap_Flash) || \ - ((REMAP) == SYSCFG_MemoryRemap_SystemFlash) || \ - ((REMAP) == SYSCFG_MemoryRemap_SRAM) || \ - ((REMAP) == SYSCFG_MemoryRemap_FSMC)) -#endif /* STM32F40_41xxx */ - -#if defined (STM32F401xx) -#define IS_SYSCFG_MEMORY_REMAP_CONFING(REMAP) (((REMAP) == SYSCFG_MemoryRemap_Flash) || \ - ((REMAP) == SYSCFG_MemoryRemap_SystemFlash) || \ - ((REMAP) == SYSCFG_MemoryRemap_SRAM)) -#endif /* STM32F401xx */ - -#if defined (STM32F427_437xx) || defined (STM32F429_439xx) -#define IS_SYSCFG_MEMORY_REMAP_CONFING(REMAP) (((REMAP) == SYSCFG_MemoryRemap_Flash) || \ - ((REMAP) == SYSCFG_MemoryRemap_SystemFlash) || \ - ((REMAP) == SYSCFG_MemoryRemap_SRAM) || \ - ((REMAP) == SYSCFG_MemoryRemap_SDRAM) || \ - ((REMAP) == SYSCFG_MemoryRemap_FMC)) -#endif /* STM32F427_437xx || STM32F429_439xx */ - -/** - * @} - */ - - -/** @defgroup SYSCFG_ETHERNET_Media_Interface - * @{ - */ -#define SYSCFG_ETH_MediaInterface_MII ((uint32_t)0x00000000) -#define SYSCFG_ETH_MediaInterface_RMII ((uint32_t)0x00000001) - -#define IS_SYSCFG_ETH_MEDIA_INTERFACE(INTERFACE) (((INTERFACE) == SYSCFG_ETH_MediaInterface_MII) || \ - ((INTERFACE) == SYSCFG_ETH_MediaInterface_RMII)) -/** - * @} - */ - -/** - * @} - */ - -/* Exported macro ------------------------------------------------------------*/ -/* Exported functions --------------------------------------------------------*/ - -void SYSCFG_DeInit(void); -void SYSCFG_MemoryRemapConfig(uint8_t SYSCFG_MemoryRemap); -void SYSCFG_MemorySwappingBank(FunctionalState NewState); -void SYSCFG_EXTILineConfig(uint8_t EXTI_PortSourceGPIOx, uint8_t EXTI_PinSourcex); -void SYSCFG_ETH_MediaInterfaceConfig(uint32_t SYSCFG_ETH_MediaInterface); -void SYSCFG_CompensationCellCmd(FunctionalState NewState); -FlagStatus SYSCFG_GetCompensationCellStatus(void); - -#ifdef __cplusplus -} -#endif - -#endif /*__STM32F4xx_SYSCFG_H */ - -/** - * @} - */ - -/** - * @} - */ - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/stm/lib/stm32f4xx_tim.c b/stm/lib/stm32f4xx_tim.c deleted file mode 100644 index 9a17ac316..000000000 --- a/stm/lib/stm32f4xx_tim.c +++ /dev/null @@ -1,3365 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f4xx_tim.c - * @author MCD Application Team - * @version V1.3.0 - * @date 08-November-2013 - * @brief This file provides firmware functions to manage the following - * functionalities of the TIM peripheral: - * + TimeBase management - * + Output Compare management - * + Input Capture management - * + Advanced-control timers (TIM1 and TIM8) specific features - * + Interrupts, DMA and flags management - * + Clocks management - * + Synchronization management - * + Specific interface management - * + Specific remapping management - * - @verbatim - =============================================================================== - ##### How to use this driver ##### - =============================================================================== - [..] - This driver provides functions to configure and program the TIM - of all STM32F4xx devices. - These functions are split in 9 groups: - - (#) TIM TimeBase management: this group includes all needed functions - to configure the TM Timebase unit: - (++) Set/Get Prescaler - (++) Set/Get Autoreload - (++) Counter modes configuration - (++) Set Clock division - (++) Select the One Pulse mode - (++) Update Request Configuration - (++) Update Disable Configuration - (++) Auto-Preload Configuration - (++) Enable/Disable the counter - - (#) TIM Output Compare management: this group includes all needed - functions to configure the Capture/Compare unit used in Output - compare mode: - (++) Configure each channel, independently, in Output Compare mode - (++) Select the output compare modes - (++) Select the Polarities of each channel - (++) Set/Get the Capture/Compare register values - (++) Select the Output Compare Fast mode - (++) Select the Output Compare Forced mode - (++) Output Compare-Preload Configuration - (++) Clear Output Compare Reference - (++) Select the OCREF Clear signal - (++) Enable/Disable the Capture/Compare Channels - - (#) TIM Input Capture management: this group includes all needed - functions to configure the Capture/Compare unit used in - Input Capture mode: - (++) Configure each channel in input capture mode - (++) Configure Channel1/2 in PWM Input mode - (++) Set the Input Capture Prescaler - (++) Get the Capture/Compare values - - (#) Advanced-control timers (TIM1 and TIM8) specific features - (++) Configures the Break input, dead time, Lock level, the OSSI, - the OSSR State and the AOE(automatic output enable) - (++) Enable/Disable the TIM peripheral Main Outputs - (++) Select the Commutation event - (++) Set/Reset the Capture Compare Preload Control bit - - (#) TIM interrupts, DMA and flags management - (++) Enable/Disable interrupt sources - (++) Get flags status - (++) Clear flags/ Pending bits - (++) Enable/Disable DMA requests - (++) Configure DMA burst mode - (++) Select CaptureCompare DMA request - - (#) TIM clocks management: this group includes all needed functions - to configure the clock controller unit: - (++) Select internal/External clock - (++) Select the external clock mode: ETR(Mode1/Mode2), TIx or ITRx - - (#) TIM synchronization management: this group includes all needed - functions to configure the Synchronization unit: - (++) Select Input Trigger - (++) Select Output Trigger - (++) Select Master Slave Mode - (++) ETR Configuration when used as external trigger - - (#) TIM specific interface management, this group includes all - needed functions to use the specific TIM interface: - (++) Encoder Interface Configuration - (++) Select Hall Sensor - - (#) TIM specific remapping management includes the Remapping - configuration of specific timers - - @endverbatim - ****************************************************************************** - * @attention - * - *

© COPYRIGHT 2013 STMicroelectronics

- * - * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License"); - * You may not use this file except in compliance with the License. - * You may obtain a copy of the License at: - * - * http://www.st.com/software_license_agreement_liberty_v2 - * - * Unless required by applicable law or agreed to in writing, software - * distributed under the License is distributed on an "AS IS" BASIS, - * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - * See the License for the specific language governing permissions and - * limitations under the License. - * - ****************************************************************************** - */ - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx_tim.h" -#include "stm32f4xx_rcc.h" - -/** @addtogroup STM32F4xx_StdPeriph_Driver - * @{ - */ - -/** @defgroup TIM - * @brief TIM driver modules - * @{ - */ - -/* Private typedef -----------------------------------------------------------*/ -/* Private define ------------------------------------------------------------*/ - -/* ---------------------- TIM registers bit mask ------------------------ */ -#define SMCR_ETR_MASK ((uint16_t)0x00FF) -#define CCMR_OFFSET ((uint16_t)0x0018) -#define CCER_CCE_SET ((uint16_t)0x0001) -#define CCER_CCNE_SET ((uint16_t)0x0004) -#define CCMR_OC13M_MASK ((uint16_t)0xFF8F) -#define CCMR_OC24M_MASK ((uint16_t)0x8FFF) - -/* Private macro -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -/* Private function prototypes -----------------------------------------------*/ -static void TI1_Config(TIM_TypeDef* TIMx, uint16_t TIM_ICPolarity, uint16_t TIM_ICSelection, - uint16_t TIM_ICFilter); -static void TI2_Config(TIM_TypeDef* TIMx, uint16_t TIM_ICPolarity, uint16_t TIM_ICSelection, - uint16_t TIM_ICFilter); -static void TI3_Config(TIM_TypeDef* TIMx, uint16_t TIM_ICPolarity, uint16_t TIM_ICSelection, - uint16_t TIM_ICFilter); -static void TI4_Config(TIM_TypeDef* TIMx, uint16_t TIM_ICPolarity, uint16_t TIM_ICSelection, - uint16_t TIM_ICFilter); - -/* Private functions ---------------------------------------------------------*/ - -/** @defgroup TIM_Private_Functions - * @{ - */ - -/** @defgroup TIM_Group1 TimeBase management functions - * @brief TimeBase management functions - * -@verbatim - =============================================================================== - ##### TimeBase management functions ##### - =============================================================================== - - - ##### TIM Driver: how to use it in Timing(Time base) Mode ##### - =============================================================================== - [..] - To use the Timer in Timing(Time base) mode, the following steps are mandatory: - - (#) Enable TIM clock using RCC_APBxPeriphClockCmd(RCC_APBxPeriph_TIMx, ENABLE) function - - (#) Fill the TIM_TimeBaseInitStruct with the desired parameters. - - (#) Call TIM_TimeBaseInit(TIMx, &TIM_TimeBaseInitStruct) to configure the Time Base unit - with the corresponding configuration - - (#) Enable the NVIC if you need to generate the update interrupt. - - (#) Enable the corresponding interrupt using the function TIM_ITConfig(TIMx, TIM_IT_Update) - - (#) Call the TIM_Cmd(ENABLE) function to enable the TIM counter. - - -@- All other functions can be used separately to modify, if needed, - a specific feature of the Timer. - -@endverbatim - * @{ - */ - -/** - * @brief Deinitializes the TIMx peripheral registers to their default reset values. - * @param TIMx: where x can be 1 to 14 to select the TIM peripheral. - * @retval None - - */ -void TIM_DeInit(TIM_TypeDef* TIMx) -{ - /* Check the parameters */ - assert_param(IS_TIM_ALL_PERIPH(TIMx)); - - if (TIMx == TIM1) - { - RCC_APB2PeriphResetCmd(RCC_APB2Periph_TIM1, ENABLE); - RCC_APB2PeriphResetCmd(RCC_APB2Periph_TIM1, DISABLE); - } - else if (TIMx == TIM2) - { - RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM2, ENABLE); - RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM2, DISABLE); - } - else if (TIMx == TIM3) - { - RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM3, ENABLE); - RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM3, DISABLE); - } - else if (TIMx == TIM4) - { - RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM4, ENABLE); - RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM4, DISABLE); - } - else if (TIMx == TIM5) - { - RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM5, ENABLE); - RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM5, DISABLE); - } - else if (TIMx == TIM6) - { - RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM6, ENABLE); - RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM6, DISABLE); - } - else if (TIMx == TIM7) - { - RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM7, ENABLE); - RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM7, DISABLE); - } - else if (TIMx == TIM8) - { - RCC_APB2PeriphResetCmd(RCC_APB2Periph_TIM8, ENABLE); - RCC_APB2PeriphResetCmd(RCC_APB2Periph_TIM8, DISABLE); - } - else if (TIMx == TIM9) - { - RCC_APB2PeriphResetCmd(RCC_APB2Periph_TIM9, ENABLE); - RCC_APB2PeriphResetCmd(RCC_APB2Periph_TIM9, DISABLE); - } - else if (TIMx == TIM10) - { - RCC_APB2PeriphResetCmd(RCC_APB2Periph_TIM10, ENABLE); - RCC_APB2PeriphResetCmd(RCC_APB2Periph_TIM10, DISABLE); - } - else if (TIMx == TIM11) - { - RCC_APB2PeriphResetCmd(RCC_APB2Periph_TIM11, ENABLE); - RCC_APB2PeriphResetCmd(RCC_APB2Periph_TIM11, DISABLE); - } - else if (TIMx == TIM12) - { - RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM12, ENABLE); - RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM12, DISABLE); - } - else if (TIMx == TIM13) - { - RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM13, ENABLE); - RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM13, DISABLE); - } - else - { - if (TIMx == TIM14) - { - RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM14, ENABLE); - RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM14, DISABLE); - } - } -} - -/** - * @brief Initializes the TIMx Time Base Unit peripheral according to - * the specified parameters in the TIM_TimeBaseInitStruct. - * @param TIMx: where x can be 1 to 14 to select the TIM peripheral. - * @param TIM_TimeBaseInitStruct: pointer to a TIM_TimeBaseInitTypeDef structure - * that contains the configuration information for the specified TIM peripheral. - * @retval None - */ -void TIM_TimeBaseInit(TIM_TypeDef* TIMx, TIM_TimeBaseInitTypeDef* TIM_TimeBaseInitStruct) -{ - uint16_t tmpcr1 = 0; - - /* Check the parameters */ - assert_param(IS_TIM_ALL_PERIPH(TIMx)); - assert_param(IS_TIM_COUNTER_MODE(TIM_TimeBaseInitStruct->TIM_CounterMode)); - assert_param(IS_TIM_CKD_DIV(TIM_TimeBaseInitStruct->TIM_ClockDivision)); - - tmpcr1 = TIMx->CR1; - - if((TIMx == TIM1) || (TIMx == TIM8)|| - (TIMx == TIM2) || (TIMx == TIM3)|| - (TIMx == TIM4) || (TIMx == TIM5)) - { - /* Select the Counter Mode */ - tmpcr1 &= (uint16_t)(~(TIM_CR1_DIR | TIM_CR1_CMS)); - tmpcr1 |= (uint32_t)TIM_TimeBaseInitStruct->TIM_CounterMode; - } - - if((TIMx != TIM6) && (TIMx != TIM7)) - { - /* Set the clock division */ - tmpcr1 &= (uint16_t)(~TIM_CR1_CKD); - tmpcr1 |= (uint32_t)TIM_TimeBaseInitStruct->TIM_ClockDivision; - } - - TIMx->CR1 = tmpcr1; - - /* Set the Autoreload value */ - TIMx->ARR = TIM_TimeBaseInitStruct->TIM_Period ; - - /* Set the Prescaler value */ - TIMx->PSC = TIM_TimeBaseInitStruct->TIM_Prescaler; - - if ((TIMx == TIM1) || (TIMx == TIM8)) - { - /* Set the Repetition Counter value */ - TIMx->RCR = TIM_TimeBaseInitStruct->TIM_RepetitionCounter; - } - - /* Generate an update event to reload the Prescaler - and the repetition counter(only for TIM1 and TIM8) value immediatly */ - TIMx->EGR = TIM_PSCReloadMode_Immediate; -} - -/** - * @brief Fills each TIM_TimeBaseInitStruct member with its default value. - * @param TIM_TimeBaseInitStruct : pointer to a TIM_TimeBaseInitTypeDef - * structure which will be initialized. - * @retval None - */ -void TIM_TimeBaseStructInit(TIM_TimeBaseInitTypeDef* TIM_TimeBaseInitStruct) -{ - /* Set the default configuration */ - TIM_TimeBaseInitStruct->TIM_Period = 0xFFFFFFFF; - TIM_TimeBaseInitStruct->TIM_Prescaler = 0x0000; - TIM_TimeBaseInitStruct->TIM_ClockDivision = TIM_CKD_DIV1; - TIM_TimeBaseInitStruct->TIM_CounterMode = TIM_CounterMode_Up; - TIM_TimeBaseInitStruct->TIM_RepetitionCounter = 0x0000; -} - -/** - * @brief Configures the TIMx Prescaler. - * @param TIMx: where x can be 1 to 14 to select the TIM peripheral. - * @param Prescaler: specifies the Prescaler Register value - * @param TIM_PSCReloadMode: specifies the TIM Prescaler Reload mode - * This parameter can be one of the following values: - * @arg TIM_PSCReloadMode_Update: The Prescaler is loaded at the update event. - * @arg TIM_PSCReloadMode_Immediate: The Prescaler is loaded immediatly. - * @retval None - */ -void TIM_PrescalerConfig(TIM_TypeDef* TIMx, uint16_t Prescaler, uint16_t TIM_PSCReloadMode) -{ - /* Check the parameters */ - assert_param(IS_TIM_ALL_PERIPH(TIMx)); - assert_param(IS_TIM_PRESCALER_RELOAD(TIM_PSCReloadMode)); - /* Set the Prescaler value */ - TIMx->PSC = Prescaler; - /* Set or reset the UG Bit */ - TIMx->EGR = TIM_PSCReloadMode; -} - -/** - * @brief Specifies the TIMx Counter Mode to be used. - * @param TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral. - * @param TIM_CounterMode: specifies the Counter Mode to be used - * This parameter can be one of the following values: - * @arg TIM_CounterMode_Up: TIM Up Counting Mode - * @arg TIM_CounterMode_Down: TIM Down Counting Mode - * @arg TIM_CounterMode_CenterAligned1: TIM Center Aligned Mode1 - * @arg TIM_CounterMode_CenterAligned2: TIM Center Aligned Mode2 - * @arg TIM_CounterMode_CenterAligned3: TIM Center Aligned Mode3 - * @retval None - */ -void TIM_CounterModeConfig(TIM_TypeDef* TIMx, uint16_t TIM_CounterMode) -{ - uint16_t tmpcr1 = 0; - - /* Check the parameters */ - assert_param(IS_TIM_LIST3_PERIPH(TIMx)); - assert_param(IS_TIM_COUNTER_MODE(TIM_CounterMode)); - - tmpcr1 = TIMx->CR1; - - /* Reset the CMS and DIR Bits */ - tmpcr1 &= (uint16_t)~(TIM_CR1_DIR | TIM_CR1_CMS); - - /* Set the Counter Mode */ - tmpcr1 |= TIM_CounterMode; - - /* Write to TIMx CR1 register */ - TIMx->CR1 = tmpcr1; -} - -/** - * @brief Sets the TIMx Counter Register value - * @param TIMx: where x can be 1 to 14 to select the TIM peripheral. - * @param Counter: specifies the Counter register new value. - * @retval None - */ -void TIM_SetCounter(TIM_TypeDef* TIMx, uint32_t Counter) -{ - /* Check the parameters */ - assert_param(IS_TIM_ALL_PERIPH(TIMx)); - - /* Set the Counter Register value */ - TIMx->CNT = Counter; -} - -/** - * @brief Sets the TIMx Autoreload Register value - * @param TIMx: where x can be 1 to 14 to select the TIM peripheral. - * @param Autoreload: specifies the Autoreload register new value. - * @retval None - */ -void TIM_SetAutoreload(TIM_TypeDef* TIMx, uint32_t Autoreload) -{ - /* Check the parameters */ - assert_param(IS_TIM_ALL_PERIPH(TIMx)); - - /* Set the Autoreload Register value */ - TIMx->ARR = Autoreload; -} - -/** - * @brief Gets the TIMx Counter value. - * @param TIMx: where x can be 1 to 14 to select the TIM peripheral. - * @retval Counter Register value - */ -uint32_t TIM_GetCounter(TIM_TypeDef* TIMx) -{ - /* Check the parameters */ - assert_param(IS_TIM_ALL_PERIPH(TIMx)); - - /* Get the Counter Register value */ - return TIMx->CNT; -} - -/** - * @brief Gets the TIMx Prescaler value. - * @param TIMx: where x can be 1 to 14 to select the TIM peripheral. - * @retval Prescaler Register value. - */ -uint16_t TIM_GetPrescaler(TIM_TypeDef* TIMx) -{ - /* Check the parameters */ - assert_param(IS_TIM_ALL_PERIPH(TIMx)); - - /* Get the Prescaler Register value */ - return TIMx->PSC; -} - -/** - * @brief Enables or Disables the TIMx Update event. - * @param TIMx: where x can be 1 to 14 to select the TIM peripheral. - * @param NewState: new state of the TIMx UDIS bit - * This parameter can be: ENABLE or DISABLE. - * @retval None - */ -void TIM_UpdateDisableConfig(TIM_TypeDef* TIMx, FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_TIM_ALL_PERIPH(TIMx)); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - - if (NewState != DISABLE) - { - /* Set the Update Disable Bit */ - TIMx->CR1 |= TIM_CR1_UDIS; - } - else - { - /* Reset the Update Disable Bit */ - TIMx->CR1 &= (uint16_t)~TIM_CR1_UDIS; - } -} - -/** - * @brief Configures the TIMx Update Request Interrupt source. - * @param TIMx: where x can be 1 to 14 to select the TIM peripheral. - * @param TIM_UpdateSource: specifies the Update source. - * This parameter can be one of the following values: - * @arg TIM_UpdateSource_Global: Source of update is the counter - * overflow/underflow or the setting of UG bit, or an update - * generation through the slave mode controller. - * @arg TIM_UpdateSource_Regular: Source of update is counter overflow/underflow. - * @retval None - */ -void TIM_UpdateRequestConfig(TIM_TypeDef* TIMx, uint16_t TIM_UpdateSource) -{ - /* Check the parameters */ - assert_param(IS_TIM_ALL_PERIPH(TIMx)); - assert_param(IS_TIM_UPDATE_SOURCE(TIM_UpdateSource)); - - if (TIM_UpdateSource != TIM_UpdateSource_Global) - { - /* Set the URS Bit */ - TIMx->CR1 |= TIM_CR1_URS; - } - else - { - /* Reset the URS Bit */ - TIMx->CR1 &= (uint16_t)~TIM_CR1_URS; - } -} - -/** - * @brief Enables or disables TIMx peripheral Preload register on ARR. - * @param TIMx: where x can be 1 to 14 to select the TIM peripheral. - * @param NewState: new state of the TIMx peripheral Preload register - * This parameter can be: ENABLE or DISABLE. - * @retval None - */ -void TIM_ARRPreloadConfig(TIM_TypeDef* TIMx, FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_TIM_ALL_PERIPH(TIMx)); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - - if (NewState != DISABLE) - { - /* Set the ARR Preload Bit */ - TIMx->CR1 |= TIM_CR1_ARPE; - } - else - { - /* Reset the ARR Preload Bit */ - TIMx->CR1 &= (uint16_t)~TIM_CR1_ARPE; - } -} - -/** - * @brief Selects the TIMx's One Pulse Mode. - * @param TIMx: where x can be 1 to 14 to select the TIM peripheral. - * @param TIM_OPMode: specifies the OPM Mode to be used. - * This parameter can be one of the following values: - * @arg TIM_OPMode_Single - * @arg TIM_OPMode_Repetitive - * @retval None - */ -void TIM_SelectOnePulseMode(TIM_TypeDef* TIMx, uint16_t TIM_OPMode) -{ - /* Check the parameters */ - assert_param(IS_TIM_ALL_PERIPH(TIMx)); - assert_param(IS_TIM_OPM_MODE(TIM_OPMode)); - - /* Reset the OPM Bit */ - TIMx->CR1 &= (uint16_t)~TIM_CR1_OPM; - - /* Configure the OPM Mode */ - TIMx->CR1 |= TIM_OPMode; -} - -/** - * @brief Sets the TIMx Clock Division value. - * @param TIMx: where x can be 1 to 14 except 6 and 7, to select the TIM peripheral. - * @param TIM_CKD: specifies the clock division value. - * This parameter can be one of the following value: - * @arg TIM_CKD_DIV1: TDTS = Tck_tim - * @arg TIM_CKD_DIV2: TDTS = 2*Tck_tim - * @arg TIM_CKD_DIV4: TDTS = 4*Tck_tim - * @retval None - */ -void TIM_SetClockDivision(TIM_TypeDef* TIMx, uint16_t TIM_CKD) -{ - /* Check the parameters */ - assert_param(IS_TIM_LIST1_PERIPH(TIMx)); - assert_param(IS_TIM_CKD_DIV(TIM_CKD)); - - /* Reset the CKD Bits */ - TIMx->CR1 &= (uint16_t)(~TIM_CR1_CKD); - - /* Set the CKD value */ - TIMx->CR1 |= TIM_CKD; -} - -/** - * @brief Enables or disables the specified TIM peripheral. - * @param TIMx: where x can be 1 to 14 to select the TIMx peripheral. - * @param NewState: new state of the TIMx peripheral. - * This parameter can be: ENABLE or DISABLE. - * @retval None - */ -void TIM_Cmd(TIM_TypeDef* TIMx, FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_TIM_ALL_PERIPH(TIMx)); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - - if (NewState != DISABLE) - { - /* Enable the TIM Counter */ - TIMx->CR1 |= TIM_CR1_CEN; - } - else - { - /* Disable the TIM Counter */ - TIMx->CR1 &= (uint16_t)~TIM_CR1_CEN; - } -} -/** - * @} - */ - -/** @defgroup TIM_Group2 Output Compare management functions - * @brief Output Compare management functions - * -@verbatim - =============================================================================== - ##### Output Compare management functions ##### - =============================================================================== - - - ##### TIM Driver: how to use it in Output Compare Mode ##### - =============================================================================== - [..] - To use the Timer in Output Compare mode, the following steps are mandatory: - - (#) Enable TIM clock using RCC_APBxPeriphClockCmd(RCC_APBxPeriph_TIMx, ENABLE) - function - - (#) Configure the TIM pins by configuring the corresponding GPIO pins - - (#) Configure the Time base unit as described in the first part of this driver, - (++) if needed, else the Timer will run with the default configuration: - Autoreload value = 0xFFFF - (++) Prescaler value = 0x0000 - (++) Counter mode = Up counting - (++) Clock Division = TIM_CKD_DIV1 - - (#) Fill the TIM_OCInitStruct with the desired parameters including: - (++) The TIM Output Compare mode: TIM_OCMode - (++) TIM Output State: TIM_OutputState - (++) TIM Pulse value: TIM_Pulse - (++) TIM Output Compare Polarity : TIM_OCPolarity - - (#) Call TIM_OCxInit(TIMx, &TIM_OCInitStruct) to configure the desired - channel with the corresponding configuration - - (#) Call the TIM_Cmd(ENABLE) function to enable the TIM counter. - - -@- All other functions can be used separately to modify, if needed, - a specific feature of the Timer. - - -@- In case of PWM mode, this function is mandatory: - TIM_OCxPreloadConfig(TIMx, TIM_OCPreload_ENABLE); - - -@- If the corresponding interrupt or DMA request are needed, the user should: - (+@) Enable the NVIC (or the DMA) to use the TIM interrupts (or DMA requests). - (+@) Enable the corresponding interrupt (or DMA request) using the function - TIM_ITConfig(TIMx, TIM_IT_CCx) (or TIM_DMA_Cmd(TIMx, TIM_DMA_CCx)) - -@endverbatim - * @{ - */ - -/** - * @brief Initializes the TIMx Channel1 according to the specified parameters in - * the TIM_OCInitStruct. - * @param TIMx: where x can be 1 to 14 except 6 and 7, to select the TIM peripheral. - * @param TIM_OCInitStruct: pointer to a TIM_OCInitTypeDef structure that contains - * the configuration information for the specified TIM peripheral. - * @retval None - */ -void TIM_OC1Init(TIM_TypeDef* TIMx, TIM_OCInitTypeDef* TIM_OCInitStruct) -{ - uint16_t tmpccmrx = 0, tmpccer = 0, tmpcr2 = 0; - - /* Check the parameters */ - assert_param(IS_TIM_LIST1_PERIPH(TIMx)); - assert_param(IS_TIM_OC_MODE(TIM_OCInitStruct->TIM_OCMode)); - assert_param(IS_TIM_OUTPUT_STATE(TIM_OCInitStruct->TIM_OutputState)); - assert_param(IS_TIM_OC_POLARITY(TIM_OCInitStruct->TIM_OCPolarity)); - - /* Disable the Channel 1: Reset the CC1E Bit */ - TIMx->CCER &= (uint16_t)~TIM_CCER_CC1E; - - /* Get the TIMx CCER register value */ - tmpccer = TIMx->CCER; - /* Get the TIMx CR2 register value */ - tmpcr2 = TIMx->CR2; - - /* Get the TIMx CCMR1 register value */ - tmpccmrx = TIMx->CCMR1; - - /* Reset the Output Compare Mode Bits */ - tmpccmrx &= (uint16_t)~TIM_CCMR1_OC1M; - tmpccmrx &= (uint16_t)~TIM_CCMR1_CC1S; - /* Select the Output Compare Mode */ - tmpccmrx |= TIM_OCInitStruct->TIM_OCMode; - - /* Reset the Output Polarity level */ - tmpccer &= (uint16_t)~TIM_CCER_CC1P; - /* Set the Output Compare Polarity */ - tmpccer |= TIM_OCInitStruct->TIM_OCPolarity; - - /* Set the Output State */ - tmpccer |= TIM_OCInitStruct->TIM_OutputState; - - if((TIMx == TIM1) || (TIMx == TIM8)) - { - assert_param(IS_TIM_OUTPUTN_STATE(TIM_OCInitStruct->TIM_OutputNState)); - assert_param(IS_TIM_OCN_POLARITY(TIM_OCInitStruct->TIM_OCNPolarity)); - assert_param(IS_TIM_OCNIDLE_STATE(TIM_OCInitStruct->TIM_OCNIdleState)); - assert_param(IS_TIM_OCIDLE_STATE(TIM_OCInitStruct->TIM_OCIdleState)); - - /* Reset the Output N Polarity level */ - tmpccer &= (uint16_t)~TIM_CCER_CC1NP; - /* Set the Output N Polarity */ - tmpccer |= TIM_OCInitStruct->TIM_OCNPolarity; - /* Reset the Output N State */ - tmpccer &= (uint16_t)~TIM_CCER_CC1NE; - - /* Set the Output N State */ - tmpccer |= TIM_OCInitStruct->TIM_OutputNState; - /* Reset the Output Compare and Output Compare N IDLE State */ - tmpcr2 &= (uint16_t)~TIM_CR2_OIS1; - tmpcr2 &= (uint16_t)~TIM_CR2_OIS1N; - /* Set the Output Idle state */ - tmpcr2 |= TIM_OCInitStruct->TIM_OCIdleState; - /* Set the Output N Idle state */ - tmpcr2 |= TIM_OCInitStruct->TIM_OCNIdleState; - } - /* Write to TIMx CR2 */ - TIMx->CR2 = tmpcr2; - - /* Write to TIMx CCMR1 */ - TIMx->CCMR1 = tmpccmrx; - - /* Set the Capture Compare Register value */ - TIMx->CCR1 = TIM_OCInitStruct->TIM_Pulse; - - /* Write to TIMx CCER */ - TIMx->CCER = tmpccer; -} - -/** - * @brief Initializes the TIMx Channel2 according to the specified parameters - * in the TIM_OCInitStruct. - * @param TIMx: where x can be 1, 2, 3, 4, 5, 8, 9 or 12 to select the TIM - * peripheral. - * @param TIM_OCInitStruct: pointer to a TIM_OCInitTypeDef structure that contains - * the configuration information for the specified TIM peripheral. - * @retval None - */ -void TIM_OC2Init(TIM_TypeDef* TIMx, TIM_OCInitTypeDef* TIM_OCInitStruct) -{ - uint16_t tmpccmrx = 0, tmpccer = 0, tmpcr2 = 0; - - /* Check the parameters */ - assert_param(IS_TIM_LIST2_PERIPH(TIMx)); - assert_param(IS_TIM_OC_MODE(TIM_OCInitStruct->TIM_OCMode)); - assert_param(IS_TIM_OUTPUT_STATE(TIM_OCInitStruct->TIM_OutputState)); - assert_param(IS_TIM_OC_POLARITY(TIM_OCInitStruct->TIM_OCPolarity)); - - /* Disable the Channel 2: Reset the CC2E Bit */ - TIMx->CCER &= (uint16_t)~TIM_CCER_CC2E; - - /* Get the TIMx CCER register value */ - tmpccer = TIMx->CCER; - /* Get the TIMx CR2 register value */ - tmpcr2 = TIMx->CR2; - - /* Get the TIMx CCMR1 register value */ - tmpccmrx = TIMx->CCMR1; - - /* Reset the Output Compare mode and Capture/Compare selection Bits */ - tmpccmrx &= (uint16_t)~TIM_CCMR1_OC2M; - tmpccmrx &= (uint16_t)~TIM_CCMR1_CC2S; - - /* Select the Output Compare Mode */ - tmpccmrx |= (uint16_t)(TIM_OCInitStruct->TIM_OCMode << 8); - - /* Reset the Output Polarity level */ - tmpccer &= (uint16_t)~TIM_CCER_CC2P; - /* Set the Output Compare Polarity */ - tmpccer |= (uint16_t)(TIM_OCInitStruct->TIM_OCPolarity << 4); - - /* Set the Output State */ - tmpccer |= (uint16_t)(TIM_OCInitStruct->TIM_OutputState << 4); - - if((TIMx == TIM1) || (TIMx == TIM8)) - { - assert_param(IS_TIM_OUTPUTN_STATE(TIM_OCInitStruct->TIM_OutputNState)); - assert_param(IS_TIM_OCN_POLARITY(TIM_OCInitStruct->TIM_OCNPolarity)); - assert_param(IS_TIM_OCNIDLE_STATE(TIM_OCInitStruct->TIM_OCNIdleState)); - assert_param(IS_TIM_OCIDLE_STATE(TIM_OCInitStruct->TIM_OCIdleState)); - - /* Reset the Output N Polarity level */ - tmpccer &= (uint16_t)~TIM_CCER_CC2NP; - /* Set the Output N Polarity */ - tmpccer |= (uint16_t)(TIM_OCInitStruct->TIM_OCNPolarity << 4); - /* Reset the Output N State */ - tmpccer &= (uint16_t)~TIM_CCER_CC2NE; - - /* Set the Output N State */ - tmpccer |= (uint16_t)(TIM_OCInitStruct->TIM_OutputNState << 4); - /* Reset the Output Compare and Output Compare N IDLE State */ - tmpcr2 &= (uint16_t)~TIM_CR2_OIS2; - tmpcr2 &= (uint16_t)~TIM_CR2_OIS2N; - /* Set the Output Idle state */ - tmpcr2 |= (uint16_t)(TIM_OCInitStruct->TIM_OCIdleState << 2); - /* Set the Output N Idle state */ - tmpcr2 |= (uint16_t)(TIM_OCInitStruct->TIM_OCNIdleState << 2); - } - /* Write to TIMx CR2 */ - TIMx->CR2 = tmpcr2; - - /* Write to TIMx CCMR1 */ - TIMx->CCMR1 = tmpccmrx; - - /* Set the Capture Compare Register value */ - TIMx->CCR2 = TIM_OCInitStruct->TIM_Pulse; - - /* Write to TIMx CCER */ - TIMx->CCER = tmpccer; -} - -/** - * @brief Initializes the TIMx Channel3 according to the specified parameters - * in the TIM_OCInitStruct. - * @param TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral. - * @param TIM_OCInitStruct: pointer to a TIM_OCInitTypeDef structure that contains - * the configuration information for the specified TIM peripheral. - * @retval None - */ -void TIM_OC3Init(TIM_TypeDef* TIMx, TIM_OCInitTypeDef* TIM_OCInitStruct) -{ - uint16_t tmpccmrx = 0, tmpccer = 0, tmpcr2 = 0; - - /* Check the parameters */ - assert_param(IS_TIM_LIST3_PERIPH(TIMx)); - assert_param(IS_TIM_OC_MODE(TIM_OCInitStruct->TIM_OCMode)); - assert_param(IS_TIM_OUTPUT_STATE(TIM_OCInitStruct->TIM_OutputState)); - assert_param(IS_TIM_OC_POLARITY(TIM_OCInitStruct->TIM_OCPolarity)); - - /* Disable the Channel 3: Reset the CC2E Bit */ - TIMx->CCER &= (uint16_t)~TIM_CCER_CC3E; - - /* Get the TIMx CCER register value */ - tmpccer = TIMx->CCER; - /* Get the TIMx CR2 register value */ - tmpcr2 = TIMx->CR2; - - /* Get the TIMx CCMR2 register value */ - tmpccmrx = TIMx->CCMR2; - - /* Reset the Output Compare mode and Capture/Compare selection Bits */ - tmpccmrx &= (uint16_t)~TIM_CCMR2_OC3M; - tmpccmrx &= (uint16_t)~TIM_CCMR2_CC3S; - /* Select the Output Compare Mode */ - tmpccmrx |= TIM_OCInitStruct->TIM_OCMode; - - /* Reset the Output Polarity level */ - tmpccer &= (uint16_t)~TIM_CCER_CC3P; - /* Set the Output Compare Polarity */ - tmpccer |= (uint16_t)(TIM_OCInitStruct->TIM_OCPolarity << 8); - - /* Set the Output State */ - tmpccer |= (uint16_t)(TIM_OCInitStruct->TIM_OutputState << 8); - - if((TIMx == TIM1) || (TIMx == TIM8)) - { - assert_param(IS_TIM_OUTPUTN_STATE(TIM_OCInitStruct->TIM_OutputNState)); - assert_param(IS_TIM_OCN_POLARITY(TIM_OCInitStruct->TIM_OCNPolarity)); - assert_param(IS_TIM_OCNIDLE_STATE(TIM_OCInitStruct->TIM_OCNIdleState)); - assert_param(IS_TIM_OCIDLE_STATE(TIM_OCInitStruct->TIM_OCIdleState)); - - /* Reset the Output N Polarity level */ - tmpccer &= (uint16_t)~TIM_CCER_CC3NP; - /* Set the Output N Polarity */ - tmpccer |= (uint16_t)(TIM_OCInitStruct->TIM_OCNPolarity << 8); - /* Reset the Output N State */ - tmpccer &= (uint16_t)~TIM_CCER_CC3NE; - - /* Set the Output N State */ - tmpccer |= (uint16_t)(TIM_OCInitStruct->TIM_OutputNState << 8); - /* Reset the Output Compare and Output Compare N IDLE State */ - tmpcr2 &= (uint16_t)~TIM_CR2_OIS3; - tmpcr2 &= (uint16_t)~TIM_CR2_OIS3N; - /* Set the Output Idle state */ - tmpcr2 |= (uint16_t)(TIM_OCInitStruct->TIM_OCIdleState << 4); - /* Set the Output N Idle state */ - tmpcr2 |= (uint16_t)(TIM_OCInitStruct->TIM_OCNIdleState << 4); - } - /* Write to TIMx CR2 */ - TIMx->CR2 = tmpcr2; - - /* Write to TIMx CCMR2 */ - TIMx->CCMR2 = tmpccmrx; - - /* Set the Capture Compare Register value */ - TIMx->CCR3 = TIM_OCInitStruct->TIM_Pulse; - - /* Write to TIMx CCER */ - TIMx->CCER = tmpccer; -} - -/** - * @brief Initializes the TIMx Channel4 according to the specified parameters - * in the TIM_OCInitStruct. - * @param TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral. - * @param TIM_OCInitStruct: pointer to a TIM_OCInitTypeDef structure that contains - * the configuration information for the specified TIM peripheral. - * @retval None - */ -void TIM_OC4Init(TIM_TypeDef* TIMx, TIM_OCInitTypeDef* TIM_OCInitStruct) -{ - uint16_t tmpccmrx = 0, tmpccer = 0, tmpcr2 = 0; - - /* Check the parameters */ - assert_param(IS_TIM_LIST3_PERIPH(TIMx)); - assert_param(IS_TIM_OC_MODE(TIM_OCInitStruct->TIM_OCMode)); - assert_param(IS_TIM_OUTPUT_STATE(TIM_OCInitStruct->TIM_OutputState)); - assert_param(IS_TIM_OC_POLARITY(TIM_OCInitStruct->TIM_OCPolarity)); - - /* Disable the Channel 4: Reset the CC4E Bit */ - TIMx->CCER &= (uint16_t)~TIM_CCER_CC4E; - - /* Get the TIMx CCER register value */ - tmpccer = TIMx->CCER; - /* Get the TIMx CR2 register value */ - tmpcr2 = TIMx->CR2; - - /* Get the TIMx CCMR2 register value */ - tmpccmrx = TIMx->CCMR2; - - /* Reset the Output Compare mode and Capture/Compare selection Bits */ - tmpccmrx &= (uint16_t)~TIM_CCMR2_OC4M; - tmpccmrx &= (uint16_t)~TIM_CCMR2_CC4S; - - /* Select the Output Compare Mode */ - tmpccmrx |= (uint16_t)(TIM_OCInitStruct->TIM_OCMode << 8); - - /* Reset the Output Polarity level */ - tmpccer &= (uint16_t)~TIM_CCER_CC4P; - /* Set the Output Compare Polarity */ - tmpccer |= (uint16_t)(TIM_OCInitStruct->TIM_OCPolarity << 12); - - /* Set the Output State */ - tmpccer |= (uint16_t)(TIM_OCInitStruct->TIM_OutputState << 12); - - if((TIMx == TIM1) || (TIMx == TIM8)) - { - assert_param(IS_TIM_OCIDLE_STATE(TIM_OCInitStruct->TIM_OCIdleState)); - /* Reset the Output Compare IDLE State */ - tmpcr2 &=(uint16_t) ~TIM_CR2_OIS4; - /* Set the Output Idle state */ - tmpcr2 |= (uint16_t)(TIM_OCInitStruct->TIM_OCIdleState << 6); - } - /* Write to TIMx CR2 */ - TIMx->CR2 = tmpcr2; - - /* Write to TIMx CCMR2 */ - TIMx->CCMR2 = tmpccmrx; - - /* Set the Capture Compare Register value */ - TIMx->CCR4 = TIM_OCInitStruct->TIM_Pulse; - - /* Write to TIMx CCER */ - TIMx->CCER = tmpccer; -} - -/** - * @brief Fills each TIM_OCInitStruct member with its default value. - * @param TIM_OCInitStruct: pointer to a TIM_OCInitTypeDef structure which will - * be initialized. - * @retval None - */ -void TIM_OCStructInit(TIM_OCInitTypeDef* TIM_OCInitStruct) -{ - /* Set the default configuration */ - TIM_OCInitStruct->TIM_OCMode = TIM_OCMode_Timing; - TIM_OCInitStruct->TIM_OutputState = TIM_OutputState_Disable; - TIM_OCInitStruct->TIM_OutputNState = TIM_OutputNState_Disable; - TIM_OCInitStruct->TIM_Pulse = 0x00000000; - TIM_OCInitStruct->TIM_OCPolarity = TIM_OCPolarity_High; - TIM_OCInitStruct->TIM_OCNPolarity = TIM_OCPolarity_High; - TIM_OCInitStruct->TIM_OCIdleState = TIM_OCIdleState_Reset; - TIM_OCInitStruct->TIM_OCNIdleState = TIM_OCNIdleState_Reset; -} - -/** - * @brief Selects the TIM Output Compare Mode. - * @note This function disables the selected channel before changing the Output - * Compare Mode. If needed, user has to enable this channel using - * TIM_CCxCmd() and TIM_CCxNCmd() functions. - * @param TIMx: where x can be 1 to 14 except 6 and 7, to select the TIM peripheral. - * @param TIM_Channel: specifies the TIM Channel - * This parameter can be one of the following values: - * @arg TIM_Channel_1: TIM Channel 1 - * @arg TIM_Channel_2: TIM Channel 2 - * @arg TIM_Channel_3: TIM Channel 3 - * @arg TIM_Channel_4: TIM Channel 4 - * @param TIM_OCMode: specifies the TIM Output Compare Mode. - * This parameter can be one of the following values: - * @arg TIM_OCMode_Timing - * @arg TIM_OCMode_Active - * @arg TIM_OCMode_Toggle - * @arg TIM_OCMode_PWM1 - * @arg TIM_OCMode_PWM2 - * @arg TIM_ForcedAction_Active - * @arg TIM_ForcedAction_InActive - * @retval None - */ -void TIM_SelectOCxM(TIM_TypeDef* TIMx, uint16_t TIM_Channel, uint16_t TIM_OCMode) -{ - uint32_t tmp = 0; - uint16_t tmp1 = 0; - - /* Check the parameters */ - assert_param(IS_TIM_LIST1_PERIPH(TIMx)); - assert_param(IS_TIM_CHANNEL(TIM_Channel)); - assert_param(IS_TIM_OCM(TIM_OCMode)); - - tmp = (uint32_t) TIMx; - tmp += CCMR_OFFSET; - - tmp1 = CCER_CCE_SET << (uint16_t)TIM_Channel; - - /* Disable the Channel: Reset the CCxE Bit */ - TIMx->CCER &= (uint16_t) ~tmp1; - - if((TIM_Channel == TIM_Channel_1) ||(TIM_Channel == TIM_Channel_3)) - { - tmp += (TIM_Channel>>1); - - /* Reset the OCxM bits in the CCMRx register */ - *(__IO uint32_t *) tmp &= CCMR_OC13M_MASK; - - /* Configure the OCxM bits in the CCMRx register */ - *(__IO uint32_t *) tmp |= TIM_OCMode; - } - else - { - tmp += (uint16_t)(TIM_Channel - (uint16_t)4)>> (uint16_t)1; - - /* Reset the OCxM bits in the CCMRx register */ - *(__IO uint32_t *) tmp &= CCMR_OC24M_MASK; - - /* Configure the OCxM bits in the CCMRx register */ - *(__IO uint32_t *) tmp |= (uint16_t)(TIM_OCMode << 8); - } -} - -/** - * @brief Sets the TIMx Capture Compare1 Register value - * @param TIMx: where x can be 1 to 14 except 6 and 7, to select the TIM peripheral. - * @param Compare1: specifies the Capture Compare1 register new value. - * @retval None - */ -void TIM_SetCompare1(TIM_TypeDef* TIMx, uint32_t Compare1) -{ - /* Check the parameters */ - assert_param(IS_TIM_LIST1_PERIPH(TIMx)); - - /* Set the Capture Compare1 Register value */ - TIMx->CCR1 = Compare1; -} - -/** - * @brief Sets the TIMx Capture Compare2 Register value - * @param TIMx: where x can be 1, 2, 3, 4, 5, 8, 9 or 12 to select the TIM - * peripheral. - * @param Compare2: specifies the Capture Compare2 register new value. - * @retval None - */ -void TIM_SetCompare2(TIM_TypeDef* TIMx, uint32_t Compare2) -{ - /* Check the parameters */ - assert_param(IS_TIM_LIST2_PERIPH(TIMx)); - - /* Set the Capture Compare2 Register value */ - TIMx->CCR2 = Compare2; -} - -/** - * @brief Sets the TIMx Capture Compare3 Register value - * @param TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral. - * @param Compare3: specifies the Capture Compare3 register new value. - * @retval None - */ -void TIM_SetCompare3(TIM_TypeDef* TIMx, uint32_t Compare3) -{ - /* Check the parameters */ - assert_param(IS_TIM_LIST3_PERIPH(TIMx)); - - /* Set the Capture Compare3 Register value */ - TIMx->CCR3 = Compare3; -} - -/** - * @brief Sets the TIMx Capture Compare4 Register value - * @param TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral. - * @param Compare4: specifies the Capture Compare4 register new value. - * @retval None - */ -void TIM_SetCompare4(TIM_TypeDef* TIMx, uint32_t Compare4) -{ - /* Check the parameters */ - assert_param(IS_TIM_LIST3_PERIPH(TIMx)); - - /* Set the Capture Compare4 Register value */ - TIMx->CCR4 = Compare4; -} - -/** - * @brief Forces the TIMx output 1 waveform to active or inactive level. - * @param TIMx: where x can be 1 to 14 except 6 and 7, to select the TIM peripheral. - * @param TIM_ForcedAction: specifies the forced Action to be set to the output waveform. - * This parameter can be one of the following values: - * @arg TIM_ForcedAction_Active: Force active level on OC1REF - * @arg TIM_ForcedAction_InActive: Force inactive level on OC1REF. - * @retval None - */ -void TIM_ForcedOC1Config(TIM_TypeDef* TIMx, uint16_t TIM_ForcedAction) -{ - uint16_t tmpccmr1 = 0; - - /* Check the parameters */ - assert_param(IS_TIM_LIST1_PERIPH(TIMx)); - assert_param(IS_TIM_FORCED_ACTION(TIM_ForcedAction)); - tmpccmr1 = TIMx->CCMR1; - - /* Reset the OC1M Bits */ - tmpccmr1 &= (uint16_t)~TIM_CCMR1_OC1M; - - /* Configure The Forced output Mode */ - tmpccmr1 |= TIM_ForcedAction; - - /* Write to TIMx CCMR1 register */ - TIMx->CCMR1 = tmpccmr1; -} - -/** - * @brief Forces the TIMx output 2 waveform to active or inactive level. - * @param TIMx: where x can be 1, 2, 3, 4, 5, 8, 9 or 12 to select the TIM - * peripheral. - * @param TIM_ForcedAction: specifies the forced Action to be set to the output waveform. - * This parameter can be one of the following values: - * @arg TIM_ForcedAction_Active: Force active level on OC2REF - * @arg TIM_ForcedAction_InActive: Force inactive level on OC2REF. - * @retval None - */ -void TIM_ForcedOC2Config(TIM_TypeDef* TIMx, uint16_t TIM_ForcedAction) -{ - uint16_t tmpccmr1 = 0; - - /* Check the parameters */ - assert_param(IS_TIM_LIST2_PERIPH(TIMx)); - assert_param(IS_TIM_FORCED_ACTION(TIM_ForcedAction)); - tmpccmr1 = TIMx->CCMR1; - - /* Reset the OC2M Bits */ - tmpccmr1 &= (uint16_t)~TIM_CCMR1_OC2M; - - /* Configure The Forced output Mode */ - tmpccmr1 |= (uint16_t)(TIM_ForcedAction << 8); - - /* Write to TIMx CCMR1 register */ - TIMx->CCMR1 = tmpccmr1; -} - -/** - * @brief Forces the TIMx output 3 waveform to active or inactive level. - * @param TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral. - * @param TIM_ForcedAction: specifies the forced Action to be set to the output waveform. - * This parameter can be one of the following values: - * @arg TIM_ForcedAction_Active: Force active level on OC3REF - * @arg TIM_ForcedAction_InActive: Force inactive level on OC3REF. - * @retval None - */ -void TIM_ForcedOC3Config(TIM_TypeDef* TIMx, uint16_t TIM_ForcedAction) -{ - uint16_t tmpccmr2 = 0; - - /* Check the parameters */ - assert_param(IS_TIM_LIST3_PERIPH(TIMx)); - assert_param(IS_TIM_FORCED_ACTION(TIM_ForcedAction)); - - tmpccmr2 = TIMx->CCMR2; - - /* Reset the OC1M Bits */ - tmpccmr2 &= (uint16_t)~TIM_CCMR2_OC3M; - - /* Configure The Forced output Mode */ - tmpccmr2 |= TIM_ForcedAction; - - /* Write to TIMx CCMR2 register */ - TIMx->CCMR2 = tmpccmr2; -} - -/** - * @brief Forces the TIMx output 4 waveform to active or inactive level. - * @param TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral. - * @param TIM_ForcedAction: specifies the forced Action to be set to the output waveform. - * This parameter can be one of the following values: - * @arg TIM_ForcedAction_Active: Force active level on OC4REF - * @arg TIM_ForcedAction_InActive: Force inactive level on OC4REF. - * @retval None - */ -void TIM_ForcedOC4Config(TIM_TypeDef* TIMx, uint16_t TIM_ForcedAction) -{ - uint16_t tmpccmr2 = 0; - - /* Check the parameters */ - assert_param(IS_TIM_LIST3_PERIPH(TIMx)); - assert_param(IS_TIM_FORCED_ACTION(TIM_ForcedAction)); - tmpccmr2 = TIMx->CCMR2; - - /* Reset the OC2M Bits */ - tmpccmr2 &= (uint16_t)~TIM_CCMR2_OC4M; - - /* Configure The Forced output Mode */ - tmpccmr2 |= (uint16_t)(TIM_ForcedAction << 8); - - /* Write to TIMx CCMR2 register */ - TIMx->CCMR2 = tmpccmr2; -} - -/** - * @brief Enables or disables the TIMx peripheral Preload register on CCR1. - * @param TIMx: where x can be 1 to 14 except 6 and 7, to select the TIM peripheral. - * @param TIM_OCPreload: new state of the TIMx peripheral Preload register - * This parameter can be one of the following values: - * @arg TIM_OCPreload_Enable - * @arg TIM_OCPreload_Disable - * @retval None - */ -void TIM_OC1PreloadConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCPreload) -{ - uint16_t tmpccmr1 = 0; - - /* Check the parameters */ - assert_param(IS_TIM_LIST1_PERIPH(TIMx)); - assert_param(IS_TIM_OCPRELOAD_STATE(TIM_OCPreload)); - - tmpccmr1 = TIMx->CCMR1; - - /* Reset the OC1PE Bit */ - tmpccmr1 &= (uint16_t)(~TIM_CCMR1_OC1PE); - - /* Enable or Disable the Output Compare Preload feature */ - tmpccmr1 |= TIM_OCPreload; - - /* Write to TIMx CCMR1 register */ - TIMx->CCMR1 = tmpccmr1; -} - -/** - * @brief Enables or disables the TIMx peripheral Preload register on CCR2. - * @param TIMx: where x can be 1, 2, 3, 4, 5, 8, 9 or 12 to select the TIM - * peripheral. - * @param TIM_OCPreload: new state of the TIMx peripheral Preload register - * This parameter can be one of the following values: - * @arg TIM_OCPreload_Enable - * @arg TIM_OCPreload_Disable - * @retval None - */ -void TIM_OC2PreloadConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCPreload) -{ - uint16_t tmpccmr1 = 0; - - /* Check the parameters */ - assert_param(IS_TIM_LIST2_PERIPH(TIMx)); - assert_param(IS_TIM_OCPRELOAD_STATE(TIM_OCPreload)); - - tmpccmr1 = TIMx->CCMR1; - - /* Reset the OC2PE Bit */ - tmpccmr1 &= (uint16_t)(~TIM_CCMR1_OC2PE); - - /* Enable or Disable the Output Compare Preload feature */ - tmpccmr1 |= (uint16_t)(TIM_OCPreload << 8); - - /* Write to TIMx CCMR1 register */ - TIMx->CCMR1 = tmpccmr1; -} - -/** - * @brief Enables or disables the TIMx peripheral Preload register on CCR3. - * @param TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral. - * @param TIM_OCPreload: new state of the TIMx peripheral Preload register - * This parameter can be one of the following values: - * @arg TIM_OCPreload_Enable - * @arg TIM_OCPreload_Disable - * @retval None - */ -void TIM_OC3PreloadConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCPreload) -{ - uint16_t tmpccmr2 = 0; - - /* Check the parameters */ - assert_param(IS_TIM_LIST3_PERIPH(TIMx)); - assert_param(IS_TIM_OCPRELOAD_STATE(TIM_OCPreload)); - - tmpccmr2 = TIMx->CCMR2; - - /* Reset the OC3PE Bit */ - tmpccmr2 &= (uint16_t)(~TIM_CCMR2_OC3PE); - - /* Enable or Disable the Output Compare Preload feature */ - tmpccmr2 |= TIM_OCPreload; - - /* Write to TIMx CCMR2 register */ - TIMx->CCMR2 = tmpccmr2; -} - -/** - * @brief Enables or disables the TIMx peripheral Preload register on CCR4. - * @param TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral. - * @param TIM_OCPreload: new state of the TIMx peripheral Preload register - * This parameter can be one of the following values: - * @arg TIM_OCPreload_Enable - * @arg TIM_OCPreload_Disable - * @retval None - */ -void TIM_OC4PreloadConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCPreload) -{ - uint16_t tmpccmr2 = 0; - - /* Check the parameters */ - assert_param(IS_TIM_LIST3_PERIPH(TIMx)); - assert_param(IS_TIM_OCPRELOAD_STATE(TIM_OCPreload)); - - tmpccmr2 = TIMx->CCMR2; - - /* Reset the OC4PE Bit */ - tmpccmr2 &= (uint16_t)(~TIM_CCMR2_OC4PE); - - /* Enable or Disable the Output Compare Preload feature */ - tmpccmr2 |= (uint16_t)(TIM_OCPreload << 8); - - /* Write to TIMx CCMR2 register */ - TIMx->CCMR2 = tmpccmr2; -} - -/** - * @brief Configures the TIMx Output Compare 1 Fast feature. - * @param TIMx: where x can be 1 to 14 except 6 and 7, to select the TIM peripheral. - * @param TIM_OCFast: new state of the Output Compare Fast Enable Bit. - * This parameter can be one of the following values: - * @arg TIM_OCFast_Enable: TIM output compare fast enable - * @arg TIM_OCFast_Disable: TIM output compare fast disable - * @retval None - */ -void TIM_OC1FastConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCFast) -{ - uint16_t tmpccmr1 = 0; - - /* Check the parameters */ - assert_param(IS_TIM_LIST1_PERIPH(TIMx)); - assert_param(IS_TIM_OCFAST_STATE(TIM_OCFast)); - - /* Get the TIMx CCMR1 register value */ - tmpccmr1 = TIMx->CCMR1; - - /* Reset the OC1FE Bit */ - tmpccmr1 &= (uint16_t)~TIM_CCMR1_OC1FE; - - /* Enable or Disable the Output Compare Fast Bit */ - tmpccmr1 |= TIM_OCFast; - - /* Write to TIMx CCMR1 */ - TIMx->CCMR1 = tmpccmr1; -} - -/** - * @brief Configures the TIMx Output Compare 2 Fast feature. - * @param TIMx: where x can be 1, 2, 3, 4, 5, 8, 9 or 12 to select the TIM - * peripheral. - * @param TIM_OCFast: new state of the Output Compare Fast Enable Bit. - * This parameter can be one of the following values: - * @arg TIM_OCFast_Enable: TIM output compare fast enable - * @arg TIM_OCFast_Disable: TIM output compare fast disable - * @retval None - */ -void TIM_OC2FastConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCFast) -{ - uint16_t tmpccmr1 = 0; - - /* Check the parameters */ - assert_param(IS_TIM_LIST2_PERIPH(TIMx)); - assert_param(IS_TIM_OCFAST_STATE(TIM_OCFast)); - - /* Get the TIMx CCMR1 register value */ - tmpccmr1 = TIMx->CCMR1; - - /* Reset the OC2FE Bit */ - tmpccmr1 &= (uint16_t)(~TIM_CCMR1_OC2FE); - - /* Enable or Disable the Output Compare Fast Bit */ - tmpccmr1 |= (uint16_t)(TIM_OCFast << 8); - - /* Write to TIMx CCMR1 */ - TIMx->CCMR1 = tmpccmr1; -} - -/** - * @brief Configures the TIMx Output Compare 3 Fast feature. - * @param TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral. - * @param TIM_OCFast: new state of the Output Compare Fast Enable Bit. - * This parameter can be one of the following values: - * @arg TIM_OCFast_Enable: TIM output compare fast enable - * @arg TIM_OCFast_Disable: TIM output compare fast disable - * @retval None - */ -void TIM_OC3FastConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCFast) -{ - uint16_t tmpccmr2 = 0; - - /* Check the parameters */ - assert_param(IS_TIM_LIST3_PERIPH(TIMx)); - assert_param(IS_TIM_OCFAST_STATE(TIM_OCFast)); - - /* Get the TIMx CCMR2 register value */ - tmpccmr2 = TIMx->CCMR2; - - /* Reset the OC3FE Bit */ - tmpccmr2 &= (uint16_t)~TIM_CCMR2_OC3FE; - - /* Enable or Disable the Output Compare Fast Bit */ - tmpccmr2 |= TIM_OCFast; - - /* Write to TIMx CCMR2 */ - TIMx->CCMR2 = tmpccmr2; -} - -/** - * @brief Configures the TIMx Output Compare 4 Fast feature. - * @param TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral. - * @param TIM_OCFast: new state of the Output Compare Fast Enable Bit. - * This parameter can be one of the following values: - * @arg TIM_OCFast_Enable: TIM output compare fast enable - * @arg TIM_OCFast_Disable: TIM output compare fast disable - * @retval None - */ -void TIM_OC4FastConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCFast) -{ - uint16_t tmpccmr2 = 0; - - /* Check the parameters */ - assert_param(IS_TIM_LIST3_PERIPH(TIMx)); - assert_param(IS_TIM_OCFAST_STATE(TIM_OCFast)); - - /* Get the TIMx CCMR2 register value */ - tmpccmr2 = TIMx->CCMR2; - - /* Reset the OC4FE Bit */ - tmpccmr2 &= (uint16_t)(~TIM_CCMR2_OC4FE); - - /* Enable or Disable the Output Compare Fast Bit */ - tmpccmr2 |= (uint16_t)(TIM_OCFast << 8); - - /* Write to TIMx CCMR2 */ - TIMx->CCMR2 = tmpccmr2; -} - -/** - * @brief Clears or safeguards the OCREF1 signal on an external event - * @param TIMx: where x can be 1 to 14 except 6 and 7, to select the TIM peripheral. - * @param TIM_OCClear: new state of the Output Compare Clear Enable Bit. - * This parameter can be one of the following values: - * @arg TIM_OCClear_Enable: TIM Output clear enable - * @arg TIM_OCClear_Disable: TIM Output clear disable - * @retval None - */ -void TIM_ClearOC1Ref(TIM_TypeDef* TIMx, uint16_t TIM_OCClear) -{ - uint16_t tmpccmr1 = 0; - - /* Check the parameters */ - assert_param(IS_TIM_LIST1_PERIPH(TIMx)); - assert_param(IS_TIM_OCCLEAR_STATE(TIM_OCClear)); - - tmpccmr1 = TIMx->CCMR1; - - /* Reset the OC1CE Bit */ - tmpccmr1 &= (uint16_t)~TIM_CCMR1_OC1CE; - - /* Enable or Disable the Output Compare Clear Bit */ - tmpccmr1 |= TIM_OCClear; - - /* Write to TIMx CCMR1 register */ - TIMx->CCMR1 = tmpccmr1; -} - -/** - * @brief Clears or safeguards the OCREF2 signal on an external event - * @param TIMx: where x can be 1, 2, 3, 4, 5, 8, 9 or 12 to select the TIM - * peripheral. - * @param TIM_OCClear: new state of the Output Compare Clear Enable Bit. - * This parameter can be one of the following values: - * @arg TIM_OCClear_Enable: TIM Output clear enable - * @arg TIM_OCClear_Disable: TIM Output clear disable - * @retval None - */ -void TIM_ClearOC2Ref(TIM_TypeDef* TIMx, uint16_t TIM_OCClear) -{ - uint16_t tmpccmr1 = 0; - - /* Check the parameters */ - assert_param(IS_TIM_LIST2_PERIPH(TIMx)); - assert_param(IS_TIM_OCCLEAR_STATE(TIM_OCClear)); - - tmpccmr1 = TIMx->CCMR1; - - /* Reset the OC2CE Bit */ - tmpccmr1 &= (uint16_t)~TIM_CCMR1_OC2CE; - - /* Enable or Disable the Output Compare Clear Bit */ - tmpccmr1 |= (uint16_t)(TIM_OCClear << 8); - - /* Write to TIMx CCMR1 register */ - TIMx->CCMR1 = tmpccmr1; -} - -/** - * @brief Clears or safeguards the OCREF3 signal on an external event - * @param TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral. - * @param TIM_OCClear: new state of the Output Compare Clear Enable Bit. - * This parameter can be one of the following values: - * @arg TIM_OCClear_Enable: TIM Output clear enable - * @arg TIM_OCClear_Disable: TIM Output clear disable - * @retval None - */ -void TIM_ClearOC3Ref(TIM_TypeDef* TIMx, uint16_t TIM_OCClear) -{ - uint16_t tmpccmr2 = 0; - - /* Check the parameters */ - assert_param(IS_TIM_LIST3_PERIPH(TIMx)); - assert_param(IS_TIM_OCCLEAR_STATE(TIM_OCClear)); - - tmpccmr2 = TIMx->CCMR2; - - /* Reset the OC3CE Bit */ - tmpccmr2 &= (uint16_t)~TIM_CCMR2_OC3CE; - - /* Enable or Disable the Output Compare Clear Bit */ - tmpccmr2 |= TIM_OCClear; - - /* Write to TIMx CCMR2 register */ - TIMx->CCMR2 = tmpccmr2; -} - -/** - * @brief Clears or safeguards the OCREF4 signal on an external event - * @param TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral. - * @param TIM_OCClear: new state of the Output Compare Clear Enable Bit. - * This parameter can be one of the following values: - * @arg TIM_OCClear_Enable: TIM Output clear enable - * @arg TIM_OCClear_Disable: TIM Output clear disable - * @retval None - */ -void TIM_ClearOC4Ref(TIM_TypeDef* TIMx, uint16_t TIM_OCClear) -{ - uint16_t tmpccmr2 = 0; - - /* Check the parameters */ - assert_param(IS_TIM_LIST3_PERIPH(TIMx)); - assert_param(IS_TIM_OCCLEAR_STATE(TIM_OCClear)); - - tmpccmr2 = TIMx->CCMR2; - - /* Reset the OC4CE Bit */ - tmpccmr2 &= (uint16_t)~TIM_CCMR2_OC4CE; - - /* Enable or Disable the Output Compare Clear Bit */ - tmpccmr2 |= (uint16_t)(TIM_OCClear << 8); - - /* Write to TIMx CCMR2 register */ - TIMx->CCMR2 = tmpccmr2; -} - -/** - * @brief Configures the TIMx channel 1 polarity. - * @param TIMx: where x can be 1 to 14 except 6 and 7, to select the TIM peripheral. - * @param TIM_OCPolarity: specifies the OC1 Polarity - * This parameter can be one of the following values: - * @arg TIM_OCPolarity_High: Output Compare active high - * @arg TIM_OCPolarity_Low: Output Compare active low - * @retval None - */ -void TIM_OC1PolarityConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCPolarity) -{ - uint16_t tmpccer = 0; - - /* Check the parameters */ - assert_param(IS_TIM_LIST1_PERIPH(TIMx)); - assert_param(IS_TIM_OC_POLARITY(TIM_OCPolarity)); - - tmpccer = TIMx->CCER; - - /* Set or Reset the CC1P Bit */ - tmpccer &= (uint16_t)(~TIM_CCER_CC1P); - tmpccer |= TIM_OCPolarity; - - /* Write to TIMx CCER register */ - TIMx->CCER = tmpccer; -} - -/** - * @brief Configures the TIMx Channel 1N polarity. - * @param TIMx: where x can be 1 or 8 to select the TIM peripheral. - * @param TIM_OCNPolarity: specifies the OC1N Polarity - * This parameter can be one of the following values: - * @arg TIM_OCNPolarity_High: Output Compare active high - * @arg TIM_OCNPolarity_Low: Output Compare active low - * @retval None - */ -void TIM_OC1NPolarityConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCNPolarity) -{ - uint16_t tmpccer = 0; - /* Check the parameters */ - assert_param(IS_TIM_LIST4_PERIPH(TIMx)); - assert_param(IS_TIM_OCN_POLARITY(TIM_OCNPolarity)); - - tmpccer = TIMx->CCER; - - /* Set or Reset the CC1NP Bit */ - tmpccer &= (uint16_t)~TIM_CCER_CC1NP; - tmpccer |= TIM_OCNPolarity; - - /* Write to TIMx CCER register */ - TIMx->CCER = tmpccer; -} - -/** - * @brief Configures the TIMx channel 2 polarity. - * @param TIMx: where x can be 1, 2, 3, 4, 5, 8, 9 or 12 to select the TIM - * peripheral. - * @param TIM_OCPolarity: specifies the OC2 Polarity - * This parameter can be one of the following values: - * @arg TIM_OCPolarity_High: Output Compare active high - * @arg TIM_OCPolarity_Low: Output Compare active low - * @retval None - */ -void TIM_OC2PolarityConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCPolarity) -{ - uint16_t tmpccer = 0; - - /* Check the parameters */ - assert_param(IS_TIM_LIST2_PERIPH(TIMx)); - assert_param(IS_TIM_OC_POLARITY(TIM_OCPolarity)); - - tmpccer = TIMx->CCER; - - /* Set or Reset the CC2P Bit */ - tmpccer &= (uint16_t)(~TIM_CCER_CC2P); - tmpccer |= (uint16_t)(TIM_OCPolarity << 4); - - /* Write to TIMx CCER register */ - TIMx->CCER = tmpccer; -} - -/** - * @brief Configures the TIMx Channel 2N polarity. - * @param TIMx: where x can be 1 or 8 to select the TIM peripheral. - * @param TIM_OCNPolarity: specifies the OC2N Polarity - * This parameter can be one of the following values: - * @arg TIM_OCNPolarity_High: Output Compare active high - * @arg TIM_OCNPolarity_Low: Output Compare active low - * @retval None - */ -void TIM_OC2NPolarityConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCNPolarity) -{ - uint16_t tmpccer = 0; - - /* Check the parameters */ - assert_param(IS_TIM_LIST4_PERIPH(TIMx)); - assert_param(IS_TIM_OCN_POLARITY(TIM_OCNPolarity)); - - tmpccer = TIMx->CCER; - - /* Set or Reset the CC2NP Bit */ - tmpccer &= (uint16_t)~TIM_CCER_CC2NP; - tmpccer |= (uint16_t)(TIM_OCNPolarity << 4); - - /* Write to TIMx CCER register */ - TIMx->CCER = tmpccer; -} - -/** - * @brief Configures the TIMx channel 3 polarity. - * @param TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral. - * @param TIM_OCPolarity: specifies the OC3 Polarity - * This parameter can be one of the following values: - * @arg TIM_OCPolarity_High: Output Compare active high - * @arg TIM_OCPolarity_Low: Output Compare active low - * @retval None - */ -void TIM_OC3PolarityConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCPolarity) -{ - uint16_t tmpccer = 0; - - /* Check the parameters */ - assert_param(IS_TIM_LIST3_PERIPH(TIMx)); - assert_param(IS_TIM_OC_POLARITY(TIM_OCPolarity)); - - tmpccer = TIMx->CCER; - - /* Set or Reset the CC3P Bit */ - tmpccer &= (uint16_t)~TIM_CCER_CC3P; - tmpccer |= (uint16_t)(TIM_OCPolarity << 8); - - /* Write to TIMx CCER register */ - TIMx->CCER = tmpccer; -} - -/** - * @brief Configures the TIMx Channel 3N polarity. - * @param TIMx: where x can be 1 or 8 to select the TIM peripheral. - * @param TIM_OCNPolarity: specifies the OC3N Polarity - * This parameter can be one of the following values: - * @arg TIM_OCNPolarity_High: Output Compare active high - * @arg TIM_OCNPolarity_Low: Output Compare active low - * @retval None - */ -void TIM_OC3NPolarityConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCNPolarity) -{ - uint16_t tmpccer = 0; - - /* Check the parameters */ - assert_param(IS_TIM_LIST4_PERIPH(TIMx)); - assert_param(IS_TIM_OCN_POLARITY(TIM_OCNPolarity)); - - tmpccer = TIMx->CCER; - - /* Set or Reset the CC3NP Bit */ - tmpccer &= (uint16_t)~TIM_CCER_CC3NP; - tmpccer |= (uint16_t)(TIM_OCNPolarity << 8); - - /* Write to TIMx CCER register */ - TIMx->CCER = tmpccer; -} - -/** - * @brief Configures the TIMx channel 4 polarity. - * @param TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral. - * @param TIM_OCPolarity: specifies the OC4 Polarity - * This parameter can be one of the following values: - * @arg TIM_OCPolarity_High: Output Compare active high - * @arg TIM_OCPolarity_Low: Output Compare active low - * @retval None - */ -void TIM_OC4PolarityConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCPolarity) -{ - uint16_t tmpccer = 0; - - /* Check the parameters */ - assert_param(IS_TIM_LIST3_PERIPH(TIMx)); - assert_param(IS_TIM_OC_POLARITY(TIM_OCPolarity)); - - tmpccer = TIMx->CCER; - - /* Set or Reset the CC4P Bit */ - tmpccer &= (uint16_t)~TIM_CCER_CC4P; - tmpccer |= (uint16_t)(TIM_OCPolarity << 12); - - /* Write to TIMx CCER register */ - TIMx->CCER = tmpccer; -} - -/** - * @brief Enables or disables the TIM Capture Compare Channel x. - * @param TIMx: where x can be 1 to 14 except 6 and 7, to select the TIM peripheral. - * @param TIM_Channel: specifies the TIM Channel - * This parameter can be one of the following values: - * @arg TIM_Channel_1: TIM Channel 1 - * @arg TIM_Channel_2: TIM Channel 2 - * @arg TIM_Channel_3: TIM Channel 3 - * @arg TIM_Channel_4: TIM Channel 4 - * @param TIM_CCx: specifies the TIM Channel CCxE bit new state. - * This parameter can be: TIM_CCx_Enable or TIM_CCx_Disable. - * @retval None - */ -void TIM_CCxCmd(TIM_TypeDef* TIMx, uint16_t TIM_Channel, uint16_t TIM_CCx) -{ - uint16_t tmp = 0; - - /* Check the parameters */ - assert_param(IS_TIM_LIST1_PERIPH(TIMx)); - assert_param(IS_TIM_CHANNEL(TIM_Channel)); - assert_param(IS_TIM_CCX(TIM_CCx)); - - tmp = CCER_CCE_SET << TIM_Channel; - - /* Reset the CCxE Bit */ - TIMx->CCER &= (uint16_t)~ tmp; - - /* Set or reset the CCxE Bit */ - TIMx->CCER |= (uint16_t)(TIM_CCx << TIM_Channel); -} - -/** - * @brief Enables or disables the TIM Capture Compare Channel xN. - * @param TIMx: where x can be 1 or 8 to select the TIM peripheral. - * @param TIM_Channel: specifies the TIM Channel - * This parameter can be one of the following values: - * @arg TIM_Channel_1: TIM Channel 1 - * @arg TIM_Channel_2: TIM Channel 2 - * @arg TIM_Channel_3: TIM Channel 3 - * @param TIM_CCxN: specifies the TIM Channel CCxNE bit new state. - * This parameter can be: TIM_CCxN_Enable or TIM_CCxN_Disable. - * @retval None - */ -void TIM_CCxNCmd(TIM_TypeDef* TIMx, uint16_t TIM_Channel, uint16_t TIM_CCxN) -{ - uint16_t tmp = 0; - - /* Check the parameters */ - assert_param(IS_TIM_LIST4_PERIPH(TIMx)); - assert_param(IS_TIM_COMPLEMENTARY_CHANNEL(TIM_Channel)); - assert_param(IS_TIM_CCXN(TIM_CCxN)); - - tmp = CCER_CCNE_SET << TIM_Channel; - - /* Reset the CCxNE Bit */ - TIMx->CCER &= (uint16_t) ~tmp; - - /* Set or reset the CCxNE Bit */ - TIMx->CCER |= (uint16_t)(TIM_CCxN << TIM_Channel); -} -/** - * @} - */ - -/** @defgroup TIM_Group3 Input Capture management functions - * @brief Input Capture management functions - * -@verbatim - =============================================================================== - ##### Input Capture management functions ##### - =============================================================================== - - ##### TIM Driver: how to use it in Input Capture Mode ##### - =============================================================================== - [..] - To use the Timer in Input Capture mode, the following steps are mandatory: - - (#) Enable TIM clock using RCC_APBxPeriphClockCmd(RCC_APBxPeriph_TIMx, ENABLE) - function - - (#) Configure the TIM pins by configuring the corresponding GPIO pins - - (#) Configure the Time base unit as described in the first part of this driver, - if needed, else the Timer will run with the default configuration: - (++) Autoreload value = 0xFFFF - (++) Prescaler value = 0x0000 - (++) Counter mode = Up counting - (++) Clock Division = TIM_CKD_DIV1 - - (#) Fill the TIM_ICInitStruct with the desired parameters including: - (++) TIM Channel: TIM_Channel - (++) TIM Input Capture polarity: TIM_ICPolarity - (++) TIM Input Capture selection: TIM_ICSelection - (++) TIM Input Capture Prescaler: TIM_ICPrescaler - (++) TIM Input CApture filter value: TIM_ICFilter - - (#) Call TIM_ICInit(TIMx, &TIM_ICInitStruct) to configure the desired channel - with the corresponding configuration and to measure only frequency - or duty cycle of the input signal, or, Call TIM_PWMIConfig(TIMx, &TIM_ICInitStruct) - to configure the desired channels with the corresponding configuration - and to measure the frequency and the duty cycle of the input signal - - (#) Enable the NVIC or the DMA to read the measured frequency. - - (#) Enable the corresponding interrupt (or DMA request) to read the Captured - value, using the function TIM_ITConfig(TIMx, TIM_IT_CCx) - (or TIM_DMA_Cmd(TIMx, TIM_DMA_CCx)) - - (#) Call the TIM_Cmd(ENABLE) function to enable the TIM counter. - - (#) Use TIM_GetCapturex(TIMx); to read the captured value. - - -@- All other functions can be used separately to modify, if needed, - a specific feature of the Timer. - -@endverbatim - * @{ - */ - -/** - * @brief Initializes the TIM peripheral according to the specified parameters - * in the TIM_ICInitStruct. - * @param TIMx: where x can be 1 to 14 except 6 and 7, to select the TIM peripheral. - * @param TIM_ICInitStruct: pointer to a TIM_ICInitTypeDef structure that contains - * the configuration information for the specified TIM peripheral. - * @retval None - */ -void TIM_ICInit(TIM_TypeDef* TIMx, TIM_ICInitTypeDef* TIM_ICInitStruct) -{ - /* Check the parameters */ - assert_param(IS_TIM_LIST1_PERIPH(TIMx)); - assert_param(IS_TIM_IC_POLARITY(TIM_ICInitStruct->TIM_ICPolarity)); - assert_param(IS_TIM_IC_SELECTION(TIM_ICInitStruct->TIM_ICSelection)); - assert_param(IS_TIM_IC_PRESCALER(TIM_ICInitStruct->TIM_ICPrescaler)); - assert_param(IS_TIM_IC_FILTER(TIM_ICInitStruct->TIM_ICFilter)); - - if (TIM_ICInitStruct->TIM_Channel == TIM_Channel_1) - { - /* TI1 Configuration */ - TI1_Config(TIMx, TIM_ICInitStruct->TIM_ICPolarity, - TIM_ICInitStruct->TIM_ICSelection, - TIM_ICInitStruct->TIM_ICFilter); - /* Set the Input Capture Prescaler value */ - TIM_SetIC1Prescaler(TIMx, TIM_ICInitStruct->TIM_ICPrescaler); - } - else if (TIM_ICInitStruct->TIM_Channel == TIM_Channel_2) - { - /* TI2 Configuration */ - assert_param(IS_TIM_LIST2_PERIPH(TIMx)); - TI2_Config(TIMx, TIM_ICInitStruct->TIM_ICPolarity, - TIM_ICInitStruct->TIM_ICSelection, - TIM_ICInitStruct->TIM_ICFilter); - /* Set the Input Capture Prescaler value */ - TIM_SetIC2Prescaler(TIMx, TIM_ICInitStruct->TIM_ICPrescaler); - } - else if (TIM_ICInitStruct->TIM_Channel == TIM_Channel_3) - { - /* TI3 Configuration */ - assert_param(IS_TIM_LIST3_PERIPH(TIMx)); - TI3_Config(TIMx, TIM_ICInitStruct->TIM_ICPolarity, - TIM_ICInitStruct->TIM_ICSelection, - TIM_ICInitStruct->TIM_ICFilter); - /* Set the Input Capture Prescaler value */ - TIM_SetIC3Prescaler(TIMx, TIM_ICInitStruct->TIM_ICPrescaler); - } - else - { - /* TI4 Configuration */ - assert_param(IS_TIM_LIST3_PERIPH(TIMx)); - TI4_Config(TIMx, TIM_ICInitStruct->TIM_ICPolarity, - TIM_ICInitStruct->TIM_ICSelection, - TIM_ICInitStruct->TIM_ICFilter); - /* Set the Input Capture Prescaler value */ - TIM_SetIC4Prescaler(TIMx, TIM_ICInitStruct->TIM_ICPrescaler); - } -} - -/** - * @brief Fills each TIM_ICInitStruct member with its default value. - * @param TIM_ICInitStruct: pointer to a TIM_ICInitTypeDef structure which will - * be initialized. - * @retval None - */ -void TIM_ICStructInit(TIM_ICInitTypeDef* TIM_ICInitStruct) -{ - /* Set the default configuration */ - TIM_ICInitStruct->TIM_Channel = TIM_Channel_1; - TIM_ICInitStruct->TIM_ICPolarity = TIM_ICPolarity_Rising; - TIM_ICInitStruct->TIM_ICSelection = TIM_ICSelection_DirectTI; - TIM_ICInitStruct->TIM_ICPrescaler = TIM_ICPSC_DIV1; - TIM_ICInitStruct->TIM_ICFilter = 0x00; -} - -/** - * @brief Configures the TIM peripheral according to the specified parameters - * in the TIM_ICInitStruct to measure an external PWM signal. - * @param TIMx: where x can be 1, 2, 3, 4, 5,8, 9 or 12 to select the TIM - * peripheral. - * @param TIM_ICInitStruct: pointer to a TIM_ICInitTypeDef structure that contains - * the configuration information for the specified TIM peripheral. - * @retval None - */ -void TIM_PWMIConfig(TIM_TypeDef* TIMx, TIM_ICInitTypeDef* TIM_ICInitStruct) -{ - uint16_t icoppositepolarity = TIM_ICPolarity_Rising; - uint16_t icoppositeselection = TIM_ICSelection_DirectTI; - - /* Check the parameters */ - assert_param(IS_TIM_LIST2_PERIPH(TIMx)); - - /* Select the Opposite Input Polarity */ - if (TIM_ICInitStruct->TIM_ICPolarity == TIM_ICPolarity_Rising) - { - icoppositepolarity = TIM_ICPolarity_Falling; - } - else - { - icoppositepolarity = TIM_ICPolarity_Rising; - } - /* Select the Opposite Input */ - if (TIM_ICInitStruct->TIM_ICSelection == TIM_ICSelection_DirectTI) - { - icoppositeselection = TIM_ICSelection_IndirectTI; - } - else - { - icoppositeselection = TIM_ICSelection_DirectTI; - } - if (TIM_ICInitStruct->TIM_Channel == TIM_Channel_1) - { - /* TI1 Configuration */ - TI1_Config(TIMx, TIM_ICInitStruct->TIM_ICPolarity, TIM_ICInitStruct->TIM_ICSelection, - TIM_ICInitStruct->TIM_ICFilter); - /* Set the Input Capture Prescaler value */ - TIM_SetIC1Prescaler(TIMx, TIM_ICInitStruct->TIM_ICPrescaler); - /* TI2 Configuration */ - TI2_Config(TIMx, icoppositepolarity, icoppositeselection, TIM_ICInitStruct->TIM_ICFilter); - /* Set the Input Capture Prescaler value */ - TIM_SetIC2Prescaler(TIMx, TIM_ICInitStruct->TIM_ICPrescaler); - } - else - { - /* TI2 Configuration */ - TI2_Config(TIMx, TIM_ICInitStruct->TIM_ICPolarity, TIM_ICInitStruct->TIM_ICSelection, - TIM_ICInitStruct->TIM_ICFilter); - /* Set the Input Capture Prescaler value */ - TIM_SetIC2Prescaler(TIMx, TIM_ICInitStruct->TIM_ICPrescaler); - /* TI1 Configuration */ - TI1_Config(TIMx, icoppositepolarity, icoppositeselection, TIM_ICInitStruct->TIM_ICFilter); - /* Set the Input Capture Prescaler value */ - TIM_SetIC1Prescaler(TIMx, TIM_ICInitStruct->TIM_ICPrescaler); - } -} - -/** - * @brief Gets the TIMx Input Capture 1 value. - * @param TIMx: where x can be 1 to 14 except 6 and 7, to select the TIM peripheral. - * @retval Capture Compare 1 Register value. - */ -uint32_t TIM_GetCapture1(TIM_TypeDef* TIMx) -{ - /* Check the parameters */ - assert_param(IS_TIM_LIST1_PERIPH(TIMx)); - - /* Get the Capture 1 Register value */ - return TIMx->CCR1; -} - -/** - * @brief Gets the TIMx Input Capture 2 value. - * @param TIMx: where x can be 1, 2, 3, 4, 5, 8, 9 or 12 to select the TIM - * peripheral. - * @retval Capture Compare 2 Register value. - */ -uint32_t TIM_GetCapture2(TIM_TypeDef* TIMx) -{ - /* Check the parameters */ - assert_param(IS_TIM_LIST2_PERIPH(TIMx)); - - /* Get the Capture 2 Register value */ - return TIMx->CCR2; -} - -/** - * @brief Gets the TIMx Input Capture 3 value. - * @param TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral. - * @retval Capture Compare 3 Register value. - */ -uint32_t TIM_GetCapture3(TIM_TypeDef* TIMx) -{ - /* Check the parameters */ - assert_param(IS_TIM_LIST3_PERIPH(TIMx)); - - /* Get the Capture 3 Register value */ - return TIMx->CCR3; -} - -/** - * @brief Gets the TIMx Input Capture 4 value. - * @param TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral. - * @retval Capture Compare 4 Register value. - */ -uint32_t TIM_GetCapture4(TIM_TypeDef* TIMx) -{ - /* Check the parameters */ - assert_param(IS_TIM_LIST3_PERIPH(TIMx)); - - /* Get the Capture 4 Register value */ - return TIMx->CCR4; -} - -/** - * @brief Sets the TIMx Input Capture 1 prescaler. - * @param TIMx: where x can be 1 to 14 except 6 and 7, to select the TIM peripheral. - * @param TIM_ICPSC: specifies the Input Capture1 prescaler new value. - * This parameter can be one of the following values: - * @arg TIM_ICPSC_DIV1: no prescaler - * @arg TIM_ICPSC_DIV2: capture is done once every 2 events - * @arg TIM_ICPSC_DIV4: capture is done once every 4 events - * @arg TIM_ICPSC_DIV8: capture is done once every 8 events - * @retval None - */ -void TIM_SetIC1Prescaler(TIM_TypeDef* TIMx, uint16_t TIM_ICPSC) -{ - /* Check the parameters */ - assert_param(IS_TIM_LIST1_PERIPH(TIMx)); - assert_param(IS_TIM_IC_PRESCALER(TIM_ICPSC)); - - /* Reset the IC1PSC Bits */ - TIMx->CCMR1 &= (uint16_t)~TIM_CCMR1_IC1PSC; - - /* Set the IC1PSC value */ - TIMx->CCMR1 |= TIM_ICPSC; -} - -/** - * @brief Sets the TIMx Input Capture 2 prescaler. - * @param TIMx: where x can be 1, 2, 3, 4, 5, 8, 9 or 12 to select the TIM - * peripheral. - * @param TIM_ICPSC: specifies the Input Capture2 prescaler new value. - * This parameter can be one of the following values: - * @arg TIM_ICPSC_DIV1: no prescaler - * @arg TIM_ICPSC_DIV2: capture is done once every 2 events - * @arg TIM_ICPSC_DIV4: capture is done once every 4 events - * @arg TIM_ICPSC_DIV8: capture is done once every 8 events - * @retval None - */ -void TIM_SetIC2Prescaler(TIM_TypeDef* TIMx, uint16_t TIM_ICPSC) -{ - /* Check the parameters */ - assert_param(IS_TIM_LIST2_PERIPH(TIMx)); - assert_param(IS_TIM_IC_PRESCALER(TIM_ICPSC)); - - /* Reset the IC2PSC Bits */ - TIMx->CCMR1 &= (uint16_t)~TIM_CCMR1_IC2PSC; - - /* Set the IC2PSC value */ - TIMx->CCMR1 |= (uint16_t)(TIM_ICPSC << 8); -} - -/** - * @brief Sets the TIMx Input Capture 3 prescaler. - * @param TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral. - * @param TIM_ICPSC: specifies the Input Capture3 prescaler new value. - * This parameter can be one of the following values: - * @arg TIM_ICPSC_DIV1: no prescaler - * @arg TIM_ICPSC_DIV2: capture is done once every 2 events - * @arg TIM_ICPSC_DIV4: capture is done once every 4 events - * @arg TIM_ICPSC_DIV8: capture is done once every 8 events - * @retval None - */ -void TIM_SetIC3Prescaler(TIM_TypeDef* TIMx, uint16_t TIM_ICPSC) -{ - /* Check the parameters */ - assert_param(IS_TIM_LIST3_PERIPH(TIMx)); - assert_param(IS_TIM_IC_PRESCALER(TIM_ICPSC)); - - /* Reset the IC3PSC Bits */ - TIMx->CCMR2 &= (uint16_t)~TIM_CCMR2_IC3PSC; - - /* Set the IC3PSC value */ - TIMx->CCMR2 |= TIM_ICPSC; -} - -/** - * @brief Sets the TIMx Input Capture 4 prescaler. - * @param TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral. - * @param TIM_ICPSC: specifies the Input Capture4 prescaler new value. - * This parameter can be one of the following values: - * @arg TIM_ICPSC_DIV1: no prescaler - * @arg TIM_ICPSC_DIV2: capture is done once every 2 events - * @arg TIM_ICPSC_DIV4: capture is done once every 4 events - * @arg TIM_ICPSC_DIV8: capture is done once every 8 events - * @retval None - */ -void TIM_SetIC4Prescaler(TIM_TypeDef* TIMx, uint16_t TIM_ICPSC) -{ - /* Check the parameters */ - assert_param(IS_TIM_LIST3_PERIPH(TIMx)); - assert_param(IS_TIM_IC_PRESCALER(TIM_ICPSC)); - - /* Reset the IC4PSC Bits */ - TIMx->CCMR2 &= (uint16_t)~TIM_CCMR2_IC4PSC; - - /* Set the IC4PSC value */ - TIMx->CCMR2 |= (uint16_t)(TIM_ICPSC << 8); -} -/** - * @} - */ - -/** @defgroup TIM_Group4 Advanced-control timers (TIM1 and TIM8) specific features - * @brief Advanced-control timers (TIM1 and TIM8) specific features - * -@verbatim - =============================================================================== - ##### Advanced-control timers (TIM1 and TIM8) specific features ##### - =============================================================================== - - ##### TIM Driver: how to use the Break feature ##### - =============================================================================== - [..] - After configuring the Timer channel(s) in the appropriate Output Compare mode: - - (#) Fill the TIM_BDTRInitStruct with the desired parameters for the Timer - Break Polarity, dead time, Lock level, the OSSI/OSSR State and the - AOE(automatic output enable). - - (#) Call TIM_BDTRConfig(TIMx, &TIM_BDTRInitStruct) to configure the Timer - - (#) Enable the Main Output using TIM_CtrlPWMOutputs(TIM1, ENABLE) - - (#) Once the break even occurs, the Timer's output signals are put in reset - state or in a known state (according to the configuration made in - TIM_BDTRConfig() function). - -@endverbatim - * @{ - */ - -/** - * @brief Configures the Break feature, dead time, Lock level, OSSI/OSSR State - * and the AOE(automatic output enable). - * @param TIMx: where x can be 1 or 8 to select the TIM - * @param TIM_BDTRInitStruct: pointer to a TIM_BDTRInitTypeDef structure that - * contains the BDTR Register configuration information for the TIM peripheral. - * @retval None - */ -void TIM_BDTRConfig(TIM_TypeDef* TIMx, TIM_BDTRInitTypeDef *TIM_BDTRInitStruct) -{ - /* Check the parameters */ - assert_param(IS_TIM_LIST4_PERIPH(TIMx)); - assert_param(IS_TIM_OSSR_STATE(TIM_BDTRInitStruct->TIM_OSSRState)); - assert_param(IS_TIM_OSSI_STATE(TIM_BDTRInitStruct->TIM_OSSIState)); - assert_param(IS_TIM_LOCK_LEVEL(TIM_BDTRInitStruct->TIM_LOCKLevel)); - assert_param(IS_TIM_BREAK_STATE(TIM_BDTRInitStruct->TIM_Break)); - assert_param(IS_TIM_BREAK_POLARITY(TIM_BDTRInitStruct->TIM_BreakPolarity)); - assert_param(IS_TIM_AUTOMATIC_OUTPUT_STATE(TIM_BDTRInitStruct->TIM_AutomaticOutput)); - - /* Set the Lock level, the Break enable Bit and the Polarity, the OSSR State, - the OSSI State, the dead time value and the Automatic Output Enable Bit */ - TIMx->BDTR = (uint32_t)TIM_BDTRInitStruct->TIM_OSSRState | TIM_BDTRInitStruct->TIM_OSSIState | - TIM_BDTRInitStruct->TIM_LOCKLevel | TIM_BDTRInitStruct->TIM_DeadTime | - TIM_BDTRInitStruct->TIM_Break | TIM_BDTRInitStruct->TIM_BreakPolarity | - TIM_BDTRInitStruct->TIM_AutomaticOutput; -} - -/** - * @brief Fills each TIM_BDTRInitStruct member with its default value. - * @param TIM_BDTRInitStruct: pointer to a TIM_BDTRInitTypeDef structure which - * will be initialized. - * @retval None - */ -void TIM_BDTRStructInit(TIM_BDTRInitTypeDef* TIM_BDTRInitStruct) -{ - /* Set the default configuration */ - TIM_BDTRInitStruct->TIM_OSSRState = TIM_OSSRState_Disable; - TIM_BDTRInitStruct->TIM_OSSIState = TIM_OSSIState_Disable; - TIM_BDTRInitStruct->TIM_LOCKLevel = TIM_LOCKLevel_OFF; - TIM_BDTRInitStruct->TIM_DeadTime = 0x00; - TIM_BDTRInitStruct->TIM_Break = TIM_Break_Disable; - TIM_BDTRInitStruct->TIM_BreakPolarity = TIM_BreakPolarity_Low; - TIM_BDTRInitStruct->TIM_AutomaticOutput = TIM_AutomaticOutput_Disable; -} - -/** - * @brief Enables or disables the TIM peripheral Main Outputs. - * @param TIMx: where x can be 1 or 8 to select the TIMx peripheral. - * @param NewState: new state of the TIM peripheral Main Outputs. - * This parameter can be: ENABLE or DISABLE. - * @retval None - */ -void TIM_CtrlPWMOutputs(TIM_TypeDef* TIMx, FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_TIM_LIST4_PERIPH(TIMx)); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - - if (NewState != DISABLE) - { - /* Enable the TIM Main Output */ - TIMx->BDTR |= TIM_BDTR_MOE; - } - else - { - /* Disable the TIM Main Output */ - TIMx->BDTR &= (uint16_t)~TIM_BDTR_MOE; - } -} - -/** - * @brief Selects the TIM peripheral Commutation event. - * @param TIMx: where x can be 1 or 8 to select the TIMx peripheral - * @param NewState: new state of the Commutation event. - * This parameter can be: ENABLE or DISABLE. - * @retval None - */ -void TIM_SelectCOM(TIM_TypeDef* TIMx, FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_TIM_LIST4_PERIPH(TIMx)); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - - if (NewState != DISABLE) - { - /* Set the COM Bit */ - TIMx->CR2 |= TIM_CR2_CCUS; - } - else - { - /* Reset the COM Bit */ - TIMx->CR2 &= (uint16_t)~TIM_CR2_CCUS; - } -} - -/** - * @brief Sets or Resets the TIM peripheral Capture Compare Preload Control bit. - * @param TIMx: where x can be 1 or 8 to select the TIMx peripheral - * @param NewState: new state of the Capture Compare Preload Control bit - * This parameter can be: ENABLE or DISABLE. - * @retval None - */ -void TIM_CCPreloadControl(TIM_TypeDef* TIMx, FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_TIM_LIST4_PERIPH(TIMx)); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - if (NewState != DISABLE) - { - /* Set the CCPC Bit */ - TIMx->CR2 |= TIM_CR2_CCPC; - } - else - { - /* Reset the CCPC Bit */ - TIMx->CR2 &= (uint16_t)~TIM_CR2_CCPC; - } -} -/** - * @} - */ - -/** @defgroup TIM_Group5 Interrupts DMA and flags management functions - * @brief Interrupts, DMA and flags management functions - * -@verbatim - =============================================================================== - ##### Interrupts, DMA and flags management functions ##### - =============================================================================== - -@endverbatim - * @{ - */ - -/** - * @brief Enables or disables the specified TIM interrupts. - * @param TIMx: where x can be 1 to 14 to select the TIMx peripheral. - * @param TIM_IT: specifies the TIM interrupts sources to be enabled or disabled. - * This parameter can be any combination of the following values: - * @arg TIM_IT_Update: TIM update Interrupt source - * @arg TIM_IT_CC1: TIM Capture Compare 1 Interrupt source - * @arg TIM_IT_CC2: TIM Capture Compare 2 Interrupt source - * @arg TIM_IT_CC3: TIM Capture Compare 3 Interrupt source - * @arg TIM_IT_CC4: TIM Capture Compare 4 Interrupt source - * @arg TIM_IT_COM: TIM Commutation Interrupt source - * @arg TIM_IT_Trigger: TIM Trigger Interrupt source - * @arg TIM_IT_Break: TIM Break Interrupt source - * - * @note For TIM6 and TIM7 only the parameter TIM_IT_Update can be used - * @note For TIM9 and TIM12 only one of the following parameters can be used: TIM_IT_Update, - * TIM_IT_CC1, TIM_IT_CC2 or TIM_IT_Trigger. - * @note For TIM10, TIM11, TIM13 and TIM14 only one of the following parameters can - * be used: TIM_IT_Update or TIM_IT_CC1 - * @note TIM_IT_COM and TIM_IT_Break can be used only with TIM1 and TIM8 - * - * @param NewState: new state of the TIM interrupts. - * This parameter can be: ENABLE or DISABLE. - * @retval None - */ -void TIM_ITConfig(TIM_TypeDef* TIMx, uint16_t TIM_IT, FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_TIM_ALL_PERIPH(TIMx)); - assert_param(IS_TIM_IT(TIM_IT)); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - - if (NewState != DISABLE) - { - /* Enable the Interrupt sources */ - TIMx->DIER |= TIM_IT; - } - else - { - /* Disable the Interrupt sources */ - TIMx->DIER &= (uint16_t)~TIM_IT; - } -} - -/** - * @brief Configures the TIMx event to be generate by software. - * @param TIMx: where x can be 1 to 14 to select the TIM peripheral. - * @param TIM_EventSource: specifies the event source. - * This parameter can be one or more of the following values: - * @arg TIM_EventSource_Update: Timer update Event source - * @arg TIM_EventSource_CC1: Timer Capture Compare 1 Event source - * @arg TIM_EventSource_CC2: Timer Capture Compare 2 Event source - * @arg TIM_EventSource_CC3: Timer Capture Compare 3 Event source - * @arg TIM_EventSource_CC4: Timer Capture Compare 4 Event source - * @arg TIM_EventSource_COM: Timer COM event source - * @arg TIM_EventSource_Trigger: Timer Trigger Event source - * @arg TIM_EventSource_Break: Timer Break event source - * - * @note TIM6 and TIM7 can only generate an update event. - * @note TIM_EventSource_COM and TIM_EventSource_Break are used only with TIM1 and TIM8. - * - * @retval None - */ -void TIM_GenerateEvent(TIM_TypeDef* TIMx, uint16_t TIM_EventSource) -{ - /* Check the parameters */ - assert_param(IS_TIM_ALL_PERIPH(TIMx)); - assert_param(IS_TIM_EVENT_SOURCE(TIM_EventSource)); - - /* Set the event sources */ - TIMx->EGR = TIM_EventSource; -} - -/** - * @brief Checks whether the specified TIM flag is set or not. - * @param TIMx: where x can be 1 to 14 to select the TIM peripheral. - * @param TIM_FLAG: specifies the flag to check. - * This parameter can be one of the following values: - * @arg TIM_FLAG_Update: TIM update Flag - * @arg TIM_FLAG_CC1: TIM Capture Compare 1 Flag - * @arg TIM_FLAG_CC2: TIM Capture Compare 2 Flag - * @arg TIM_FLAG_CC3: TIM Capture Compare 3 Flag - * @arg TIM_FLAG_CC4: TIM Capture Compare 4 Flag - * @arg TIM_FLAG_COM: TIM Commutation Flag - * @arg TIM_FLAG_Trigger: TIM Trigger Flag - * @arg TIM_FLAG_Break: TIM Break Flag - * @arg TIM_FLAG_CC1OF: TIM Capture Compare 1 over capture Flag - * @arg TIM_FLAG_CC2OF: TIM Capture Compare 2 over capture Flag - * @arg TIM_FLAG_CC3OF: TIM Capture Compare 3 over capture Flag - * @arg TIM_FLAG_CC4OF: TIM Capture Compare 4 over capture Flag - * - * @note TIM6 and TIM7 can have only one update flag. - * @note TIM_FLAG_COM and TIM_FLAG_Break are used only with TIM1 and TIM8. - * - * @retval The new state of TIM_FLAG (SET or RESET). - */ -FlagStatus TIM_GetFlagStatus(TIM_TypeDef* TIMx, uint16_t TIM_FLAG) -{ - ITStatus bitstatus = RESET; - /* Check the parameters */ - assert_param(IS_TIM_ALL_PERIPH(TIMx)); - assert_param(IS_TIM_GET_FLAG(TIM_FLAG)); - - - if ((TIMx->SR & TIM_FLAG) != (uint16_t)RESET) - { - bitstatus = SET; - } - else - { - bitstatus = RESET; - } - return bitstatus; -} - -/** - * @brief Clears the TIMx's pending flags. - * @param TIMx: where x can be 1 to 14 to select the TIM peripheral. - * @param TIM_FLAG: specifies the flag bit to clear. - * This parameter can be any combination of the following values: - * @arg TIM_FLAG_Update: TIM update Flag - * @arg TIM_FLAG_CC1: TIM Capture Compare 1 Flag - * @arg TIM_FLAG_CC2: TIM Capture Compare 2 Flag - * @arg TIM_FLAG_CC3: TIM Capture Compare 3 Flag - * @arg TIM_FLAG_CC4: TIM Capture Compare 4 Flag - * @arg TIM_FLAG_COM: TIM Commutation Flag - * @arg TIM_FLAG_Trigger: TIM Trigger Flag - * @arg TIM_FLAG_Break: TIM Break Flag - * @arg TIM_FLAG_CC1OF: TIM Capture Compare 1 over capture Flag - * @arg TIM_FLAG_CC2OF: TIM Capture Compare 2 over capture Flag - * @arg TIM_FLAG_CC3OF: TIM Capture Compare 3 over capture Flag - * @arg TIM_FLAG_CC4OF: TIM Capture Compare 4 over capture Flag - * - * @note TIM6 and TIM7 can have only one update flag. - * @note TIM_FLAG_COM and TIM_FLAG_Break are used only with TIM1 and TIM8. - * - * @retval None - */ -void TIM_ClearFlag(TIM_TypeDef* TIMx, uint16_t TIM_FLAG) -{ - /* Check the parameters */ - assert_param(IS_TIM_ALL_PERIPH(TIMx)); - - /* Clear the flags */ - TIMx->SR = (uint16_t)~TIM_FLAG; -} - -/** - * @brief Checks whether the TIM interrupt has occurred or not. - * @param TIMx: where x can be 1 to 14 to select the TIM peripheral. - * @param TIM_IT: specifies the TIM interrupt source to check. - * This parameter can be one of the following values: - * @arg TIM_IT_Update: TIM update Interrupt source - * @arg TIM_IT_CC1: TIM Capture Compare 1 Interrupt source - * @arg TIM_IT_CC2: TIM Capture Compare 2 Interrupt source - * @arg TIM_IT_CC3: TIM Capture Compare 3 Interrupt source - * @arg TIM_IT_CC4: TIM Capture Compare 4 Interrupt source - * @arg TIM_IT_COM: TIM Commutation Interrupt source - * @arg TIM_IT_Trigger: TIM Trigger Interrupt source - * @arg TIM_IT_Break: TIM Break Interrupt source - * - * @note TIM6 and TIM7 can generate only an update interrupt. - * @note TIM_IT_COM and TIM_IT_Break are used only with TIM1 and TIM8. - * - * @retval The new state of the TIM_IT(SET or RESET). - */ -ITStatus TIM_GetITStatus(TIM_TypeDef* TIMx, uint16_t TIM_IT) -{ - ITStatus bitstatus = RESET; - uint16_t itstatus = 0x0, itenable = 0x0; - /* Check the parameters */ - assert_param(IS_TIM_ALL_PERIPH(TIMx)); - assert_param(IS_TIM_GET_IT(TIM_IT)); - - itstatus = TIMx->SR & TIM_IT; - - itenable = TIMx->DIER & TIM_IT; - if ((itstatus != (uint16_t)RESET) && (itenable != (uint16_t)RESET)) - { - bitstatus = SET; - } - else - { - bitstatus = RESET; - } - return bitstatus; -} - -/** - * @brief Clears the TIMx's interrupt pending bits. - * @param TIMx: where x can be 1 to 14 to select the TIM peripheral. - * @param TIM_IT: specifies the pending bit to clear. - * This parameter can be any combination of the following values: - * @arg TIM_IT_Update: TIM1 update Interrupt source - * @arg TIM_IT_CC1: TIM Capture Compare 1 Interrupt source - * @arg TIM_IT_CC2: TIM Capture Compare 2 Interrupt source - * @arg TIM_IT_CC3: TIM Capture Compare 3 Interrupt source - * @arg TIM_IT_CC4: TIM Capture Compare 4 Interrupt source - * @arg TIM_IT_COM: TIM Commutation Interrupt source - * @arg TIM_IT_Trigger: TIM Trigger Interrupt source - * @arg TIM_IT_Break: TIM Break Interrupt source - * - * @note TIM6 and TIM7 can generate only an update interrupt. - * @note TIM_IT_COM and TIM_IT_Break are used only with TIM1 and TIM8. - * - * @retval None - */ -void TIM_ClearITPendingBit(TIM_TypeDef* TIMx, uint16_t TIM_IT) -{ - /* Check the parameters */ - assert_param(IS_TIM_ALL_PERIPH(TIMx)); - - /* Clear the IT pending Bit */ - TIMx->SR = (uint16_t)~TIM_IT; -} - -/** - * @brief Configures the TIMx's DMA interface. - * @param TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral. - * @param TIM_DMABase: DMA Base address. - * This parameter can be one of the following values: - * @arg TIM_DMABase_CR1 - * @arg TIM_DMABase_CR2 - * @arg TIM_DMABase_SMCR - * @arg TIM_DMABase_DIER - * @arg TIM1_DMABase_SR - * @arg TIM_DMABase_EGR - * @arg TIM_DMABase_CCMR1 - * @arg TIM_DMABase_CCMR2 - * @arg TIM_DMABase_CCER - * @arg TIM_DMABase_CNT - * @arg TIM_DMABase_PSC - * @arg TIM_DMABase_ARR - * @arg TIM_DMABase_RCR - * @arg TIM_DMABase_CCR1 - * @arg TIM_DMABase_CCR2 - * @arg TIM_DMABase_CCR3 - * @arg TIM_DMABase_CCR4 - * @arg TIM_DMABase_BDTR - * @arg TIM_DMABase_DCR - * @param TIM_DMABurstLength: DMA Burst length. This parameter can be one value - * between: TIM_DMABurstLength_1Transfer and TIM_DMABurstLength_18Transfers. - * @retval None - */ -void TIM_DMAConfig(TIM_TypeDef* TIMx, uint16_t TIM_DMABase, uint16_t TIM_DMABurstLength) -{ - /* Check the parameters */ - assert_param(IS_TIM_LIST3_PERIPH(TIMx)); - assert_param(IS_TIM_DMA_BASE(TIM_DMABase)); - assert_param(IS_TIM_DMA_LENGTH(TIM_DMABurstLength)); - - /* Set the DMA Base and the DMA Burst Length */ - TIMx->DCR = TIM_DMABase | TIM_DMABurstLength; -} - -/** - * @brief Enables or disables the TIMx's DMA Requests. - * @param TIMx: where x can be 1, 2, 3, 4, 5, 6, 7 or 8 to select the TIM peripheral. - * @param TIM_DMASource: specifies the DMA Request sources. - * This parameter can be any combination of the following values: - * @arg TIM_DMA_Update: TIM update Interrupt source - * @arg TIM_DMA_CC1: TIM Capture Compare 1 DMA source - * @arg TIM_DMA_CC2: TIM Capture Compare 2 DMA source - * @arg TIM_DMA_CC3: TIM Capture Compare 3 DMA source - * @arg TIM_DMA_CC4: TIM Capture Compare 4 DMA source - * @arg TIM_DMA_COM: TIM Commutation DMA source - * @arg TIM_DMA_Trigger: TIM Trigger DMA source - * @param NewState: new state of the DMA Request sources. - * This parameter can be: ENABLE or DISABLE. - * @retval None - */ -void TIM_DMACmd(TIM_TypeDef* TIMx, uint16_t TIM_DMASource, FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_TIM_LIST5_PERIPH(TIMx)); - assert_param(IS_TIM_DMA_SOURCE(TIM_DMASource)); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - - if (NewState != DISABLE) - { - /* Enable the DMA sources */ - TIMx->DIER |= TIM_DMASource; - } - else - { - /* Disable the DMA sources */ - TIMx->DIER &= (uint16_t)~TIM_DMASource; - } -} - -/** - * @brief Selects the TIMx peripheral Capture Compare DMA source. - * @param TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral. - * @param NewState: new state of the Capture Compare DMA source - * This parameter can be: ENABLE or DISABLE. - * @retval None - */ -void TIM_SelectCCDMA(TIM_TypeDef* TIMx, FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_TIM_LIST3_PERIPH(TIMx)); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - - if (NewState != DISABLE) - { - /* Set the CCDS Bit */ - TIMx->CR2 |= TIM_CR2_CCDS; - } - else - { - /* Reset the CCDS Bit */ - TIMx->CR2 &= (uint16_t)~TIM_CR2_CCDS; - } -} -/** - * @} - */ - -/** @defgroup TIM_Group6 Clocks management functions - * @brief Clocks management functions - * -@verbatim - =============================================================================== - ##### Clocks management functions ##### - =============================================================================== - -@endverbatim - * @{ - */ - -/** - * @brief Configures the TIMx internal Clock - * @param TIMx: where x can be 1, 2, 3, 4, 5, 8, 9 or 12 to select the TIM - * peripheral. - * @retval None - */ -void TIM_InternalClockConfig(TIM_TypeDef* TIMx) -{ - /* Check the parameters */ - assert_param(IS_TIM_LIST2_PERIPH(TIMx)); - - /* Disable slave mode to clock the prescaler directly with the internal clock */ - TIMx->SMCR &= (uint16_t)~TIM_SMCR_SMS; -} - -/** - * @brief Configures the TIMx Internal Trigger as External Clock - * @param TIMx: where x can be 1, 2, 3, 4, 5, 8, 9 or 12 to select the TIM - * peripheral. - * @param TIM_InputTriggerSource: Trigger source. - * This parameter can be one of the following values: - * @arg TIM_TS_ITR0: Internal Trigger 0 - * @arg TIM_TS_ITR1: Internal Trigger 1 - * @arg TIM_TS_ITR2: Internal Trigger 2 - * @arg TIM_TS_ITR3: Internal Trigger 3 - * @retval None - */ -void TIM_ITRxExternalClockConfig(TIM_TypeDef* TIMx, uint16_t TIM_InputTriggerSource) -{ - /* Check the parameters */ - assert_param(IS_TIM_LIST2_PERIPH(TIMx)); - assert_param(IS_TIM_INTERNAL_TRIGGER_SELECTION(TIM_InputTriggerSource)); - - /* Select the Internal Trigger */ - TIM_SelectInputTrigger(TIMx, TIM_InputTriggerSource); - - /* Select the External clock mode1 */ - TIMx->SMCR |= TIM_SlaveMode_External1; -} - -/** - * @brief Configures the TIMx Trigger as External Clock - * @param TIMx: where x can be 1, 2, 3, 4, 5, 8, 9, 10, 11, 12, 13 or 14 - * to select the TIM peripheral. - * @param TIM_TIxExternalCLKSource: Trigger source. - * This parameter can be one of the following values: - * @arg TIM_TIxExternalCLK1Source_TI1ED: TI1 Edge Detector - * @arg TIM_TIxExternalCLK1Source_TI1: Filtered Timer Input 1 - * @arg TIM_TIxExternalCLK1Source_TI2: Filtered Timer Input 2 - * @param TIM_ICPolarity: specifies the TIx Polarity. - * This parameter can be one of the following values: - * @arg TIM_ICPolarity_Rising - * @arg TIM_ICPolarity_Falling - * @param ICFilter: specifies the filter value. - * This parameter must be a value between 0x0 and 0xF. - * @retval None - */ -void TIM_TIxExternalClockConfig(TIM_TypeDef* TIMx, uint16_t TIM_TIxExternalCLKSource, - uint16_t TIM_ICPolarity, uint16_t ICFilter) -{ - /* Check the parameters */ - assert_param(IS_TIM_LIST1_PERIPH(TIMx)); - assert_param(IS_TIM_IC_POLARITY(TIM_ICPolarity)); - assert_param(IS_TIM_IC_FILTER(ICFilter)); - - /* Configure the Timer Input Clock Source */ - if (TIM_TIxExternalCLKSource == TIM_TIxExternalCLK1Source_TI2) - { - TI2_Config(TIMx, TIM_ICPolarity, TIM_ICSelection_DirectTI, ICFilter); - } - else - { - TI1_Config(TIMx, TIM_ICPolarity, TIM_ICSelection_DirectTI, ICFilter); - } - /* Select the Trigger source */ - TIM_SelectInputTrigger(TIMx, TIM_TIxExternalCLKSource); - /* Select the External clock mode1 */ - TIMx->SMCR |= TIM_SlaveMode_External1; -} - -/** - * @brief Configures the External clock Mode1 - * @param TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral. - * @param TIM_ExtTRGPrescaler: The external Trigger Prescaler. - * This parameter can be one of the following values: - * @arg TIM_ExtTRGPSC_OFF: ETRP Prescaler OFF. - * @arg TIM_ExtTRGPSC_DIV2: ETRP frequency divided by 2. - * @arg TIM_ExtTRGPSC_DIV4: ETRP frequency divided by 4. - * @arg TIM_ExtTRGPSC_DIV8: ETRP frequency divided by 8. - * @param TIM_ExtTRGPolarity: The external Trigger Polarity. - * This parameter can be one of the following values: - * @arg TIM_ExtTRGPolarity_Inverted: active low or falling edge active. - * @arg TIM_ExtTRGPolarity_NonInverted: active high or rising edge active. - * @param ExtTRGFilter: External Trigger Filter. - * This parameter must be a value between 0x00 and 0x0F - * @retval None - */ -void TIM_ETRClockMode1Config(TIM_TypeDef* TIMx, uint16_t TIM_ExtTRGPrescaler, - uint16_t TIM_ExtTRGPolarity, uint16_t ExtTRGFilter) -{ - uint16_t tmpsmcr = 0; - - /* Check the parameters */ - assert_param(IS_TIM_LIST3_PERIPH(TIMx)); - assert_param(IS_TIM_EXT_PRESCALER(TIM_ExtTRGPrescaler)); - assert_param(IS_TIM_EXT_POLARITY(TIM_ExtTRGPolarity)); - assert_param(IS_TIM_EXT_FILTER(ExtTRGFilter)); - /* Configure the ETR Clock source */ - TIM_ETRConfig(TIMx, TIM_ExtTRGPrescaler, TIM_ExtTRGPolarity, ExtTRGFilter); - - /* Get the TIMx SMCR register value */ - tmpsmcr = TIMx->SMCR; - - /* Reset the SMS Bits */ - tmpsmcr &= (uint16_t)~TIM_SMCR_SMS; - - /* Select the External clock mode1 */ - tmpsmcr |= TIM_SlaveMode_External1; - - /* Select the Trigger selection : ETRF */ - tmpsmcr &= (uint16_t)~TIM_SMCR_TS; - tmpsmcr |= TIM_TS_ETRF; - - /* Write to TIMx SMCR */ - TIMx->SMCR = tmpsmcr; -} - -/** - * @brief Configures the External clock Mode2 - * @param TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral. - * @param TIM_ExtTRGPrescaler: The external Trigger Prescaler. - * This parameter can be one of the following values: - * @arg TIM_ExtTRGPSC_OFF: ETRP Prescaler OFF. - * @arg TIM_ExtTRGPSC_DIV2: ETRP frequency divided by 2. - * @arg TIM_ExtTRGPSC_DIV4: ETRP frequency divided by 4. - * @arg TIM_ExtTRGPSC_DIV8: ETRP frequency divided by 8. - * @param TIM_ExtTRGPolarity: The external Trigger Polarity. - * This parameter can be one of the following values: - * @arg TIM_ExtTRGPolarity_Inverted: active low or falling edge active. - * @arg TIM_ExtTRGPolarity_NonInverted: active high or rising edge active. - * @param ExtTRGFilter: External Trigger Filter. - * This parameter must be a value between 0x00 and 0x0F - * @retval None - */ -void TIM_ETRClockMode2Config(TIM_TypeDef* TIMx, uint16_t TIM_ExtTRGPrescaler, - uint16_t TIM_ExtTRGPolarity, uint16_t ExtTRGFilter) -{ - /* Check the parameters */ - assert_param(IS_TIM_LIST3_PERIPH(TIMx)); - assert_param(IS_TIM_EXT_PRESCALER(TIM_ExtTRGPrescaler)); - assert_param(IS_TIM_EXT_POLARITY(TIM_ExtTRGPolarity)); - assert_param(IS_TIM_EXT_FILTER(ExtTRGFilter)); - - /* Configure the ETR Clock source */ - TIM_ETRConfig(TIMx, TIM_ExtTRGPrescaler, TIM_ExtTRGPolarity, ExtTRGFilter); - - /* Enable the External clock mode2 */ - TIMx->SMCR |= TIM_SMCR_ECE; -} -/** - * @} - */ - -/** @defgroup TIM_Group7 Synchronization management functions - * @brief Synchronization management functions - * -@verbatim - =============================================================================== - ##### Synchronization management functions ##### - =============================================================================== - - ##### TIM Driver: how to use it in synchronization Mode ##### - =============================================================================== - [..] - - *** Case of two/several Timers *** - ================================== - [..] - (#) Configure the Master Timers using the following functions: - (++) void TIM_SelectOutputTrigger(TIM_TypeDef* TIMx, uint16_t TIM_TRGOSource); - (++) void TIM_SelectMasterSlaveMode(TIM_TypeDef* TIMx, uint16_t TIM_MasterSlaveMode); - (#) Configure the Slave Timers using the following functions: - (++) void TIM_SelectInputTrigger(TIM_TypeDef* TIMx, uint16_t TIM_InputTriggerSource); - (++) void TIM_SelectSlaveMode(TIM_TypeDef* TIMx, uint16_t TIM_SlaveMode); - - *** Case of Timers and external trigger(ETR pin) *** - ==================================================== - [..] - (#) Configure the External trigger using this function: - (++) void TIM_ETRConfig(TIM_TypeDef* TIMx, uint16_t TIM_ExtTRGPrescaler, uint16_t TIM_ExtTRGPolarity, - uint16_t ExtTRGFilter); - (#) Configure the Slave Timers using the following functions: - (++) void TIM_SelectInputTrigger(TIM_TypeDef* TIMx, uint16_t TIM_InputTriggerSource); - (++) void TIM_SelectSlaveMode(TIM_TypeDef* TIMx, uint16_t TIM_SlaveMode); - -@endverbatim - * @{ - */ - -/** - * @brief Selects the Input Trigger source - * @param TIMx: where x can be 1, 2, 3, 4, 5, 8, 9, 10, 11, 12, 13 or 14 - * to select the TIM peripheral. - * @param TIM_InputTriggerSource: The Input Trigger source. - * This parameter can be one of the following values: - * @arg TIM_TS_ITR0: Internal Trigger 0 - * @arg TIM_TS_ITR1: Internal Trigger 1 - * @arg TIM_TS_ITR2: Internal Trigger 2 - * @arg TIM_TS_ITR3: Internal Trigger 3 - * @arg TIM_TS_TI1F_ED: TI1 Edge Detector - * @arg TIM_TS_TI1FP1: Filtered Timer Input 1 - * @arg TIM_TS_TI2FP2: Filtered Timer Input 2 - * @arg TIM_TS_ETRF: External Trigger input - * @retval None - */ -void TIM_SelectInputTrigger(TIM_TypeDef* TIMx, uint16_t TIM_InputTriggerSource) -{ - uint16_t tmpsmcr = 0; - - /* Check the parameters */ - assert_param(IS_TIM_LIST1_PERIPH(TIMx)); - assert_param(IS_TIM_TRIGGER_SELECTION(TIM_InputTriggerSource)); - - /* Get the TIMx SMCR register value */ - tmpsmcr = TIMx->SMCR; - - /* Reset the TS Bits */ - tmpsmcr &= (uint16_t)~TIM_SMCR_TS; - - /* Set the Input Trigger source */ - tmpsmcr |= TIM_InputTriggerSource; - - /* Write to TIMx SMCR */ - TIMx->SMCR = tmpsmcr; -} - -/** - * @brief Selects the TIMx Trigger Output Mode. - * @param TIMx: where x can be 1, 2, 3, 4, 5, 6, 7 or 8 to select the TIM peripheral. - * - * @param TIM_TRGOSource: specifies the Trigger Output source. - * This parameter can be one of the following values: - * - * - For all TIMx - * @arg TIM_TRGOSource_Reset: The UG bit in the TIM_EGR register is used as the trigger output(TRGO) - * @arg TIM_TRGOSource_Enable: The Counter Enable CEN is used as the trigger output(TRGO) - * @arg TIM_TRGOSource_Update: The update event is selected as the trigger output(TRGO) - * - * - For all TIMx except TIM6 and TIM7 - * @arg TIM_TRGOSource_OC1: The trigger output sends a positive pulse when the CC1IF flag - * is to be set, as soon as a capture or compare match occurs(TRGO) - * @arg TIM_TRGOSource_OC1Ref: OC1REF signal is used as the trigger output(TRGO) - * @arg TIM_TRGOSource_OC2Ref: OC2REF signal is used as the trigger output(TRGO) - * @arg TIM_TRGOSource_OC3Ref: OC3REF signal is used as the trigger output(TRGO) - * @arg TIM_TRGOSource_OC4Ref: OC4REF signal is used as the trigger output(TRGO) - * - * @retval None - */ -void TIM_SelectOutputTrigger(TIM_TypeDef* TIMx, uint16_t TIM_TRGOSource) -{ - /* Check the parameters */ - assert_param(IS_TIM_LIST5_PERIPH(TIMx)); - assert_param(IS_TIM_TRGO_SOURCE(TIM_TRGOSource)); - - /* Reset the MMS Bits */ - TIMx->CR2 &= (uint16_t)~TIM_CR2_MMS; - /* Select the TRGO source */ - TIMx->CR2 |= TIM_TRGOSource; -} - -/** - * @brief Selects the TIMx Slave Mode. - * @param TIMx: where x can be 1, 2, 3, 4, 5, 8, 9 or 12 to select the TIM peripheral. - * @param TIM_SlaveMode: specifies the Timer Slave Mode. - * This parameter can be one of the following values: - * @arg TIM_SlaveMode_Reset: Rising edge of the selected trigger signal(TRGI) reinitialize - * the counter and triggers an update of the registers - * @arg TIM_SlaveMode_Gated: The counter clock is enabled when the trigger signal (TRGI) is high - * @arg TIM_SlaveMode_Trigger: The counter starts at a rising edge of the trigger TRGI - * @arg TIM_SlaveMode_External1: Rising edges of the selected trigger (TRGI) clock the counter - * @retval None - */ -void TIM_SelectSlaveMode(TIM_TypeDef* TIMx, uint16_t TIM_SlaveMode) -{ - /* Check the parameters */ - assert_param(IS_TIM_LIST2_PERIPH(TIMx)); - assert_param(IS_TIM_SLAVE_MODE(TIM_SlaveMode)); - - /* Reset the SMS Bits */ - TIMx->SMCR &= (uint16_t)~TIM_SMCR_SMS; - - /* Select the Slave Mode */ - TIMx->SMCR |= TIM_SlaveMode; -} - -/** - * @brief Sets or Resets the TIMx Master/Slave Mode. - * @param TIMx: where x can be 1, 2, 3, 4, 5, 8, 9 or 12 to select the TIM peripheral. - * @param TIM_MasterSlaveMode: specifies the Timer Master Slave Mode. - * This parameter can be one of the following values: - * @arg TIM_MasterSlaveMode_Enable: synchronization between the current timer - * and its slaves (through TRGO) - * @arg TIM_MasterSlaveMode_Disable: No action - * @retval None - */ -void TIM_SelectMasterSlaveMode(TIM_TypeDef* TIMx, uint16_t TIM_MasterSlaveMode) -{ - /* Check the parameters */ - assert_param(IS_TIM_LIST2_PERIPH(TIMx)); - assert_param(IS_TIM_MSM_STATE(TIM_MasterSlaveMode)); - - /* Reset the MSM Bit */ - TIMx->SMCR &= (uint16_t)~TIM_SMCR_MSM; - - /* Set or Reset the MSM Bit */ - TIMx->SMCR |= TIM_MasterSlaveMode; -} - -/** - * @brief Configures the TIMx External Trigger (ETR). - * @param TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral. - * @param TIM_ExtTRGPrescaler: The external Trigger Prescaler. - * This parameter can be one of the following values: - * @arg TIM_ExtTRGPSC_OFF: ETRP Prescaler OFF. - * @arg TIM_ExtTRGPSC_DIV2: ETRP frequency divided by 2. - * @arg TIM_ExtTRGPSC_DIV4: ETRP frequency divided by 4. - * @arg TIM_ExtTRGPSC_DIV8: ETRP frequency divided by 8. - * @param TIM_ExtTRGPolarity: The external Trigger Polarity. - * This parameter can be one of the following values: - * @arg TIM_ExtTRGPolarity_Inverted: active low or falling edge active. - * @arg TIM_ExtTRGPolarity_NonInverted: active high or rising edge active. - * @param ExtTRGFilter: External Trigger Filter. - * This parameter must be a value between 0x00 and 0x0F - * @retval None - */ -void TIM_ETRConfig(TIM_TypeDef* TIMx, uint16_t TIM_ExtTRGPrescaler, - uint16_t TIM_ExtTRGPolarity, uint16_t ExtTRGFilter) -{ - uint16_t tmpsmcr = 0; - - /* Check the parameters */ - assert_param(IS_TIM_LIST3_PERIPH(TIMx)); - assert_param(IS_TIM_EXT_PRESCALER(TIM_ExtTRGPrescaler)); - assert_param(IS_TIM_EXT_POLARITY(TIM_ExtTRGPolarity)); - assert_param(IS_TIM_EXT_FILTER(ExtTRGFilter)); - - tmpsmcr = TIMx->SMCR; - - /* Reset the ETR Bits */ - tmpsmcr &= SMCR_ETR_MASK; - - /* Set the Prescaler, the Filter value and the Polarity */ - tmpsmcr |= (uint16_t)(TIM_ExtTRGPrescaler | (uint16_t)(TIM_ExtTRGPolarity | (uint16_t)(ExtTRGFilter << (uint16_t)8))); - - /* Write to TIMx SMCR */ - TIMx->SMCR = tmpsmcr; -} -/** - * @} - */ - -/** @defgroup TIM_Group8 Specific interface management functions - * @brief Specific interface management functions - * -@verbatim - =============================================================================== - ##### Specific interface management functions ##### - =============================================================================== - -@endverbatim - * @{ - */ - -/** - * @brief Configures the TIMx Encoder Interface. - * @param TIMx: where x can be 1, 2, 3, 4, 5, 8, 9 or 12 to select the TIM - * peripheral. - * @param TIM_EncoderMode: specifies the TIMx Encoder Mode. - * This parameter can be one of the following values: - * @arg TIM_EncoderMode_TI1: Counter counts on TI1FP1 edge depending on TI2FP2 level. - * @arg TIM_EncoderMode_TI2: Counter counts on TI2FP2 edge depending on TI1FP1 level. - * @arg TIM_EncoderMode_TI12: Counter counts on both TI1FP1 and TI2FP2 edges depending - * on the level of the other input. - * @param TIM_IC1Polarity: specifies the IC1 Polarity - * This parameter can be one of the following values: - * @arg TIM_ICPolarity_Falling: IC Falling edge. - * @arg TIM_ICPolarity_Rising: IC Rising edge. - * @param TIM_IC2Polarity: specifies the IC2 Polarity - * This parameter can be one of the following values: - * @arg TIM_ICPolarity_Falling: IC Falling edge. - * @arg TIM_ICPolarity_Rising: IC Rising edge. - * @retval None - */ -void TIM_EncoderInterfaceConfig(TIM_TypeDef* TIMx, uint16_t TIM_EncoderMode, - uint16_t TIM_IC1Polarity, uint16_t TIM_IC2Polarity) -{ - uint16_t tmpsmcr = 0; - uint16_t tmpccmr1 = 0; - uint16_t tmpccer = 0; - - /* Check the parameters */ - assert_param(IS_TIM_LIST2_PERIPH(TIMx)); - assert_param(IS_TIM_ENCODER_MODE(TIM_EncoderMode)); - assert_param(IS_TIM_IC_POLARITY(TIM_IC1Polarity)); - assert_param(IS_TIM_IC_POLARITY(TIM_IC2Polarity)); - - /* Get the TIMx SMCR register value */ - tmpsmcr = TIMx->SMCR; - - /* Get the TIMx CCMR1 register value */ - tmpccmr1 = TIMx->CCMR1; - - /* Get the TIMx CCER register value */ - tmpccer = TIMx->CCER; - - /* Set the encoder Mode */ - tmpsmcr &= (uint16_t)~TIM_SMCR_SMS; - tmpsmcr |= TIM_EncoderMode; - - /* Select the Capture Compare 1 and the Capture Compare 2 as input */ - tmpccmr1 &= ((uint16_t)~TIM_CCMR1_CC1S) & ((uint16_t)~TIM_CCMR1_CC2S); - tmpccmr1 |= TIM_CCMR1_CC1S_0 | TIM_CCMR1_CC2S_0; - - /* Set the TI1 and the TI2 Polarities */ - tmpccer &= ((uint16_t)~TIM_CCER_CC1P) & ((uint16_t)~TIM_CCER_CC2P); - tmpccer |= (uint16_t)(TIM_IC1Polarity | (uint16_t)(TIM_IC2Polarity << (uint16_t)4)); - - /* Write to TIMx SMCR */ - TIMx->SMCR = tmpsmcr; - - /* Write to TIMx CCMR1 */ - TIMx->CCMR1 = tmpccmr1; - - /* Write to TIMx CCER */ - TIMx->CCER = tmpccer; -} - -/** - * @brief Enables or disables the TIMx's Hall sensor interface. - * @param TIMx: where x can be 1, 2, 3, 4, 5, 8, 9 or 12 to select the TIM - * peripheral. - * @param NewState: new state of the TIMx Hall sensor interface. - * This parameter can be: ENABLE or DISABLE. - * @retval None - */ -void TIM_SelectHallSensor(TIM_TypeDef* TIMx, FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_TIM_LIST2_PERIPH(TIMx)); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - - if (NewState != DISABLE) - { - /* Set the TI1S Bit */ - TIMx->CR2 |= TIM_CR2_TI1S; - } - else - { - /* Reset the TI1S Bit */ - TIMx->CR2 &= (uint16_t)~TIM_CR2_TI1S; - } -} -/** - * @} - */ - -/** @defgroup TIM_Group9 Specific remapping management function - * @brief Specific remapping management function - * -@verbatim - =============================================================================== - ##### Specific remapping management function ##### - =============================================================================== - -@endverbatim - * @{ - */ - -/** - * @brief Configures the TIM2, TIM5 and TIM11 Remapping input capabilities. - * @param TIMx: where x can be 2, 5 or 11 to select the TIM peripheral. - * @param TIM_Remap: specifies the TIM input remapping source. - * This parameter can be one of the following values: - * @arg TIM2_TIM8_TRGO: TIM2 ITR1 input is connected to TIM8 Trigger output(default) - * @arg TIM2_ETH_PTP: TIM2 ITR1 input is connected to ETH PTP trogger output. - * @arg TIM2_USBFS_SOF: TIM2 ITR1 input is connected to USB FS SOF. - * @arg TIM2_USBHS_SOF: TIM2 ITR1 input is connected to USB HS SOF. - * @arg TIM5_GPIO: TIM5 CH4 input is connected to dedicated Timer pin(default) - * @arg TIM5_LSI: TIM5 CH4 input is connected to LSI clock. - * @arg TIM5_LSE: TIM5 CH4 input is connected to LSE clock. - * @arg TIM5_RTC: TIM5 CH4 input is connected to RTC Output event. - * @arg TIM11_GPIO: TIM11 CH4 input is connected to dedicated Timer pin(default) - * @arg TIM11_HSE: TIM11 CH4 input is connected to HSE_RTC clock - * (HSE divided by a programmable prescaler) - * @retval None - */ -void TIM_RemapConfig(TIM_TypeDef* TIMx, uint16_t TIM_Remap) -{ - /* Check the parameters */ - assert_param(IS_TIM_LIST6_PERIPH(TIMx)); - assert_param(IS_TIM_REMAP(TIM_Remap)); - - /* Set the Timer remapping configuration */ - TIMx->OR = TIM_Remap; -} -/** - * @} - */ - -/** - * @brief Configure the TI1 as Input. - * @param TIMx: where x can be 1, 2, 3, 4, 5, 8, 9, 10, 11, 12, 13 or 14 - * to select the TIM peripheral. - * @param TIM_ICPolarity : The Input Polarity. - * This parameter can be one of the following values: - * @arg TIM_ICPolarity_Rising - * @arg TIM_ICPolarity_Falling - * @arg TIM_ICPolarity_BothEdge - * @param TIM_ICSelection: specifies the input to be used. - * This parameter can be one of the following values: - * @arg TIM_ICSelection_DirectTI: TIM Input 1 is selected to be connected to IC1. - * @arg TIM_ICSelection_IndirectTI: TIM Input 1 is selected to be connected to IC2. - * @arg TIM_ICSelection_TRC: TIM Input 1 is selected to be connected to TRC. - * @param TIM_ICFilter: Specifies the Input Capture Filter. - * This parameter must be a value between 0x00 and 0x0F. - * @retval None - */ -static void TI1_Config(TIM_TypeDef* TIMx, uint16_t TIM_ICPolarity, uint16_t TIM_ICSelection, - uint16_t TIM_ICFilter) -{ - uint16_t tmpccmr1 = 0, tmpccer = 0; - - /* Disable the Channel 1: Reset the CC1E Bit */ - TIMx->CCER &= (uint16_t)~TIM_CCER_CC1E; - tmpccmr1 = TIMx->CCMR1; - tmpccer = TIMx->CCER; - - /* Select the Input and set the filter */ - tmpccmr1 &= ((uint16_t)~TIM_CCMR1_CC1S) & ((uint16_t)~TIM_CCMR1_IC1F); - tmpccmr1 |= (uint16_t)(TIM_ICSelection | (uint16_t)(TIM_ICFilter << (uint16_t)4)); - - /* Select the Polarity and set the CC1E Bit */ - tmpccer &= (uint16_t)~(TIM_CCER_CC1P | TIM_CCER_CC1NP); - tmpccer |= (uint16_t)(TIM_ICPolarity | (uint16_t)TIM_CCER_CC1E); - - /* Write to TIMx CCMR1 and CCER registers */ - TIMx->CCMR1 = tmpccmr1; - TIMx->CCER = tmpccer; -} - -/** - * @brief Configure the TI2 as Input. - * @param TIMx: where x can be 1, 2, 3, 4, 5, 8, 9 or 12 to select the TIM - * peripheral. - * @param TIM_ICPolarity : The Input Polarity. - * This parameter can be one of the following values: - * @arg TIM_ICPolarity_Rising - * @arg TIM_ICPolarity_Falling - * @arg TIM_ICPolarity_BothEdge - * @param TIM_ICSelection: specifies the input to be used. - * This parameter can be one of the following values: - * @arg TIM_ICSelection_DirectTI: TIM Input 2 is selected to be connected to IC2. - * @arg TIM_ICSelection_IndirectTI: TIM Input 2 is selected to be connected to IC1. - * @arg TIM_ICSelection_TRC: TIM Input 2 is selected to be connected to TRC. - * @param TIM_ICFilter: Specifies the Input Capture Filter. - * This parameter must be a value between 0x00 and 0x0F. - * @retval None - */ -static void TI2_Config(TIM_TypeDef* TIMx, uint16_t TIM_ICPolarity, uint16_t TIM_ICSelection, - uint16_t TIM_ICFilter) -{ - uint16_t tmpccmr1 = 0, tmpccer = 0, tmp = 0; - - /* Disable the Channel 2: Reset the CC2E Bit */ - TIMx->CCER &= (uint16_t)~TIM_CCER_CC2E; - tmpccmr1 = TIMx->CCMR1; - tmpccer = TIMx->CCER; - tmp = (uint16_t)(TIM_ICPolarity << 4); - - /* Select the Input and set the filter */ - tmpccmr1 &= ((uint16_t)~TIM_CCMR1_CC2S) & ((uint16_t)~TIM_CCMR1_IC2F); - tmpccmr1 |= (uint16_t)(TIM_ICFilter << 12); - tmpccmr1 |= (uint16_t)(TIM_ICSelection << 8); - - /* Select the Polarity and set the CC2E Bit */ - tmpccer &= (uint16_t)~(TIM_CCER_CC2P | TIM_CCER_CC2NP); - tmpccer |= (uint16_t)(tmp | (uint16_t)TIM_CCER_CC2E); - - /* Write to TIMx CCMR1 and CCER registers */ - TIMx->CCMR1 = tmpccmr1 ; - TIMx->CCER = tmpccer; -} - -/** - * @brief Configure the TI3 as Input. - * @param TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral. - * @param TIM_ICPolarity : The Input Polarity. - * This parameter can be one of the following values: - * @arg TIM_ICPolarity_Rising - * @arg TIM_ICPolarity_Falling - * @arg TIM_ICPolarity_BothEdge - * @param TIM_ICSelection: specifies the input to be used. - * This parameter can be one of the following values: - * @arg TIM_ICSelection_DirectTI: TIM Input 3 is selected to be connected to IC3. - * @arg TIM_ICSelection_IndirectTI: TIM Input 3 is selected to be connected to IC4. - * @arg TIM_ICSelection_TRC: TIM Input 3 is selected to be connected to TRC. - * @param TIM_ICFilter: Specifies the Input Capture Filter. - * This parameter must be a value between 0x00 and 0x0F. - * @retval None - */ -static void TI3_Config(TIM_TypeDef* TIMx, uint16_t TIM_ICPolarity, uint16_t TIM_ICSelection, - uint16_t TIM_ICFilter) -{ - uint16_t tmpccmr2 = 0, tmpccer = 0, tmp = 0; - - /* Disable the Channel 3: Reset the CC3E Bit */ - TIMx->CCER &= (uint16_t)~TIM_CCER_CC3E; - tmpccmr2 = TIMx->CCMR2; - tmpccer = TIMx->CCER; - tmp = (uint16_t)(TIM_ICPolarity << 8); - - /* Select the Input and set the filter */ - tmpccmr2 &= ((uint16_t)~TIM_CCMR1_CC1S) & ((uint16_t)~TIM_CCMR2_IC3F); - tmpccmr2 |= (uint16_t)(TIM_ICSelection | (uint16_t)(TIM_ICFilter << (uint16_t)4)); - - /* Select the Polarity and set the CC3E Bit */ - tmpccer &= (uint16_t)~(TIM_CCER_CC3P | TIM_CCER_CC3NP); - tmpccer |= (uint16_t)(tmp | (uint16_t)TIM_CCER_CC3E); - - /* Write to TIMx CCMR2 and CCER registers */ - TIMx->CCMR2 = tmpccmr2; - TIMx->CCER = tmpccer; -} - -/** - * @brief Configure the TI4 as Input. - * @param TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral. - * @param TIM_ICPolarity : The Input Polarity. - * This parameter can be one of the following values: - * @arg TIM_ICPolarity_Rising - * @arg TIM_ICPolarity_Falling - * @arg TIM_ICPolarity_BothEdge - * @param TIM_ICSelection: specifies the input to be used. - * This parameter can be one of the following values: - * @arg TIM_ICSelection_DirectTI: TIM Input 4 is selected to be connected to IC4. - * @arg TIM_ICSelection_IndirectTI: TIM Input 4 is selected to be connected to IC3. - * @arg TIM_ICSelection_TRC: TIM Input 4 is selected to be connected to TRC. - * @param TIM_ICFilter: Specifies the Input Capture Filter. - * This parameter must be a value between 0x00 and 0x0F. - * @retval None - */ -static void TI4_Config(TIM_TypeDef* TIMx, uint16_t TIM_ICPolarity, uint16_t TIM_ICSelection, - uint16_t TIM_ICFilter) -{ - uint16_t tmpccmr2 = 0, tmpccer = 0, tmp = 0; - - /* Disable the Channel 4: Reset the CC4E Bit */ - TIMx->CCER &= (uint16_t)~TIM_CCER_CC4E; - tmpccmr2 = TIMx->CCMR2; - tmpccer = TIMx->CCER; - tmp = (uint16_t)(TIM_ICPolarity << 12); - - /* Select the Input and set the filter */ - tmpccmr2 &= ((uint16_t)~TIM_CCMR1_CC2S) & ((uint16_t)~TIM_CCMR1_IC2F); - tmpccmr2 |= (uint16_t)(TIM_ICSelection << 8); - tmpccmr2 |= (uint16_t)(TIM_ICFilter << 12); - - /* Select the Polarity and set the CC4E Bit */ - tmpccer &= (uint16_t)~(TIM_CCER_CC4P | TIM_CCER_CC4NP); - tmpccer |= (uint16_t)(tmp | (uint16_t)TIM_CCER_CC4E); - - /* Write to TIMx CCMR2 and CCER registers */ - TIMx->CCMR2 = tmpccmr2; - TIMx->CCER = tmpccer ; -} - -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/stm/lib/stm32f4xx_tim.h b/stm/lib/stm32f4xx_tim.h deleted file mode 100644 index 7983cc024..000000000 --- a/stm/lib/stm32f4xx_tim.h +++ /dev/null @@ -1,1150 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f4xx_tim.h - * @author MCD Application Team - * @version V1.3.0 - * @date 08-November-2013 - * @brief This file contains all the functions prototypes for the TIM firmware - * library. - ****************************************************************************** - * @attention - * - *

© COPYRIGHT 2013 STMicroelectronics

- * - * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License"); - * You may not use this file except in compliance with the License. - * You may obtain a copy of the License at: - * - * http://www.st.com/software_license_agreement_liberty_v2 - * - * Unless required by applicable law or agreed to in writing, software - * distributed under the License is distributed on an "AS IS" BASIS, - * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - * See the License for the specific language governing permissions and - * limitations under the License. - * - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F4xx_TIM_H -#define __STM32F4xx_TIM_H - -#ifdef __cplusplus - extern "C" { -#endif - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx.h" - -/** @addtogroup STM32F4xx_StdPeriph_Driver - * @{ - */ - -/** @addtogroup TIM - * @{ - */ - -/* Exported types ------------------------------------------------------------*/ - -/** - * @brief TIM Time Base Init structure definition - * @note This structure is used with all TIMx except for TIM6 and TIM7. - */ - -typedef struct -{ - uint16_t TIM_Prescaler; /*!< Specifies the prescaler value used to divide the TIM clock. - This parameter can be a number between 0x0000 and 0xFFFF */ - - uint16_t TIM_CounterMode; /*!< Specifies the counter mode. - This parameter can be a value of @ref TIM_Counter_Mode */ - - uint32_t TIM_Period; /*!< Specifies the period value to be loaded into the active - Auto-Reload Register at the next update event. - This parameter must be a number between 0x0000 and 0xFFFF. */ - - uint16_t TIM_ClockDivision; /*!< Specifies the clock division. - This parameter can be a value of @ref TIM_Clock_Division_CKD */ - - uint8_t TIM_RepetitionCounter; /*!< Specifies the repetition counter value. Each time the RCR downcounter - reaches zero, an update event is generated and counting restarts - from the RCR value (N). - This means in PWM mode that (N+1) corresponds to: - - the number of PWM periods in edge-aligned mode - - the number of half PWM period in center-aligned mode - This parameter must be a number between 0x00 and 0xFF. - @note This parameter is valid only for TIM1 and TIM8. */ -} TIM_TimeBaseInitTypeDef; - -/** - * @brief TIM Output Compare Init structure definition - */ - -typedef struct -{ - uint16_t TIM_OCMode; /*!< Specifies the TIM mode. - This parameter can be a value of @ref TIM_Output_Compare_and_PWM_modes */ - - uint16_t TIM_OutputState; /*!< Specifies the TIM Output Compare state. - This parameter can be a value of @ref TIM_Output_Compare_State */ - - uint16_t TIM_OutputNState; /*!< Specifies the TIM complementary Output Compare state. - This parameter can be a value of @ref TIM_Output_Compare_N_State - @note This parameter is valid only for TIM1 and TIM8. */ - - uint32_t TIM_Pulse; /*!< Specifies the pulse value to be loaded into the Capture Compare Register. - This parameter can be a number between 0x0000 and 0xFFFF */ - - uint16_t TIM_OCPolarity; /*!< Specifies the output polarity. - This parameter can be a value of @ref TIM_Output_Compare_Polarity */ - - uint16_t TIM_OCNPolarity; /*!< Specifies the complementary output polarity. - This parameter can be a value of @ref TIM_Output_Compare_N_Polarity - @note This parameter is valid only for TIM1 and TIM8. */ - - uint16_t TIM_OCIdleState; /*!< Specifies the TIM Output Compare pin state during Idle state. - This parameter can be a value of @ref TIM_Output_Compare_Idle_State - @note This parameter is valid only for TIM1 and TIM8. */ - - uint16_t TIM_OCNIdleState; /*!< Specifies the TIM Output Compare pin state during Idle state. - This parameter can be a value of @ref TIM_Output_Compare_N_Idle_State - @note This parameter is valid only for TIM1 and TIM8. */ -} TIM_OCInitTypeDef; - -/** - * @brief TIM Input Capture Init structure definition - */ - -typedef struct -{ - - uint16_t TIM_Channel; /*!< Specifies the TIM channel. - This parameter can be a value of @ref TIM_Channel */ - - uint16_t TIM_ICPolarity; /*!< Specifies the active edge of the input signal. - This parameter can be a value of @ref TIM_Input_Capture_Polarity */ - - uint16_t TIM_ICSelection; /*!< Specifies the input. - This parameter can be a value of @ref TIM_Input_Capture_Selection */ - - uint16_t TIM_ICPrescaler; /*!< Specifies the Input Capture Prescaler. - This parameter can be a value of @ref TIM_Input_Capture_Prescaler */ - - uint16_t TIM_ICFilter; /*!< Specifies the input capture filter. - This parameter can be a number between 0x0 and 0xF */ -} TIM_ICInitTypeDef; - -/** - * @brief BDTR structure definition - * @note This structure is used only with TIM1 and TIM8. - */ - -typedef struct -{ - - uint16_t TIM_OSSRState; /*!< Specifies the Off-State selection used in Run mode. - This parameter can be a value of @ref TIM_OSSR_Off_State_Selection_for_Run_mode_state */ - - uint16_t TIM_OSSIState; /*!< Specifies the Off-State used in Idle state. - This parameter can be a value of @ref TIM_OSSI_Off_State_Selection_for_Idle_mode_state */ - - uint16_t TIM_LOCKLevel; /*!< Specifies the LOCK level parameters. - This parameter can be a value of @ref TIM_Lock_level */ - - uint16_t TIM_DeadTime; /*!< Specifies the delay time between the switching-off and the - switching-on of the outputs. - This parameter can be a number between 0x00 and 0xFF */ - - uint16_t TIM_Break; /*!< Specifies whether the TIM Break input is enabled or not. - This parameter can be a value of @ref TIM_Break_Input_enable_disable */ - - uint16_t TIM_BreakPolarity; /*!< Specifies the TIM Break Input pin polarity. - This parameter can be a value of @ref TIM_Break_Polarity */ - - uint16_t TIM_AutomaticOutput; /*!< Specifies whether the TIM Automatic Output feature is enabled or not. - This parameter can be a value of @ref TIM_AOE_Bit_Set_Reset */ -} TIM_BDTRInitTypeDef; - -/* Exported constants --------------------------------------------------------*/ - -/** @defgroup TIM_Exported_constants - * @{ - */ - -#define IS_TIM_ALL_PERIPH(PERIPH) (((PERIPH) == TIM1) || \ - ((PERIPH) == TIM2) || \ - ((PERIPH) == TIM3) || \ - ((PERIPH) == TIM4) || \ - ((PERIPH) == TIM5) || \ - ((PERIPH) == TIM6) || \ - ((PERIPH) == TIM7) || \ - ((PERIPH) == TIM8) || \ - ((PERIPH) == TIM9) || \ - ((PERIPH) == TIM10) || \ - ((PERIPH) == TIM11) || \ - ((PERIPH) == TIM12) || \ - (((PERIPH) == TIM13) || \ - ((PERIPH) == TIM14))) -/* LIST1: TIM1, TIM2, TIM3, TIM4, TIM5, TIM8, TIM9, TIM10, TIM11, TIM12, TIM13 and TIM14 */ -#define IS_TIM_LIST1_PERIPH(PERIPH) (((PERIPH) == TIM1) || \ - ((PERIPH) == TIM2) || \ - ((PERIPH) == TIM3) || \ - ((PERIPH) == TIM4) || \ - ((PERIPH) == TIM5) || \ - ((PERIPH) == TIM8) || \ - ((PERIPH) == TIM9) || \ - ((PERIPH) == TIM10) || \ - ((PERIPH) == TIM11) || \ - ((PERIPH) == TIM12) || \ - ((PERIPH) == TIM13) || \ - ((PERIPH) == TIM14)) - -/* LIST2: TIM1, TIM2, TIM3, TIM4, TIM5, TIM8, TIM9 and TIM12 */ -#define IS_TIM_LIST2_PERIPH(PERIPH) (((PERIPH) == TIM1) || \ - ((PERIPH) == TIM2) || \ - ((PERIPH) == TIM3) || \ - ((PERIPH) == TIM4) || \ - ((PERIPH) == TIM5) || \ - ((PERIPH) == TIM8) || \ - ((PERIPH) == TIM9) || \ - ((PERIPH) == TIM12)) -/* LIST3: TIM1, TIM2, TIM3, TIM4, TIM5 and TIM8 */ -#define IS_TIM_LIST3_PERIPH(PERIPH) (((PERIPH) == TIM1) || \ - ((PERIPH) == TIM2) || \ - ((PERIPH) == TIM3) || \ - ((PERIPH) == TIM4) || \ - ((PERIPH) == TIM5) || \ - ((PERIPH) == TIM8)) -/* LIST4: TIM1 and TIM8 */ -#define IS_TIM_LIST4_PERIPH(PERIPH) (((PERIPH) == TIM1) || \ - ((PERIPH) == TIM8)) -/* LIST5: TIM1, TIM2, TIM3, TIM4, TIM5, TIM6, TIM7 and TIM8 */ -#define IS_TIM_LIST5_PERIPH(PERIPH) (((PERIPH) == TIM1) || \ - ((PERIPH) == TIM2) || \ - ((PERIPH) == TIM3) || \ - ((PERIPH) == TIM4) || \ - ((PERIPH) == TIM5) || \ - ((PERIPH) == TIM6) || \ - ((PERIPH) == TIM7) || \ - ((PERIPH) == TIM8)) -/* LIST6: TIM2, TIM5 and TIM11 */ -#define IS_TIM_LIST6_PERIPH(TIMx)(((TIMx) == TIM2) || \ - ((TIMx) == TIM5) || \ - ((TIMx) == TIM11)) - -/** @defgroup TIM_Output_Compare_and_PWM_modes - * @{ - */ - -#define TIM_OCMode_Timing ((uint16_t)0x0000) -#define TIM_OCMode_Active ((uint16_t)0x0010) -#define TIM_OCMode_Inactive ((uint16_t)0x0020) -#define TIM_OCMode_Toggle ((uint16_t)0x0030) -#define TIM_OCMode_PWM1 ((uint16_t)0x0060) -#define TIM_OCMode_PWM2 ((uint16_t)0x0070) -#define IS_TIM_OC_MODE(MODE) (((MODE) == TIM_OCMode_Timing) || \ - ((MODE) == TIM_OCMode_Active) || \ - ((MODE) == TIM_OCMode_Inactive) || \ - ((MODE) == TIM_OCMode_Toggle)|| \ - ((MODE) == TIM_OCMode_PWM1) || \ - ((MODE) == TIM_OCMode_PWM2)) -#define IS_TIM_OCM(MODE) (((MODE) == TIM_OCMode_Timing) || \ - ((MODE) == TIM_OCMode_Active) || \ - ((MODE) == TIM_OCMode_Inactive) || \ - ((MODE) == TIM_OCMode_Toggle)|| \ - ((MODE) == TIM_OCMode_PWM1) || \ - ((MODE) == TIM_OCMode_PWM2) || \ - ((MODE) == TIM_ForcedAction_Active) || \ - ((MODE) == TIM_ForcedAction_InActive)) -/** - * @} - */ - -/** @defgroup TIM_One_Pulse_Mode - * @{ - */ - -#define TIM_OPMode_Single ((uint16_t)0x0008) -#define TIM_OPMode_Repetitive ((uint16_t)0x0000) -#define IS_TIM_OPM_MODE(MODE) (((MODE) == TIM_OPMode_Single) || \ - ((MODE) == TIM_OPMode_Repetitive)) -/** - * @} - */ - -/** @defgroup TIM_Channel - * @{ - */ - -#define TIM_Channel_1 ((uint16_t)0x0000) -#define TIM_Channel_2 ((uint16_t)0x0004) -#define TIM_Channel_3 ((uint16_t)0x0008) -#define TIM_Channel_4 ((uint16_t)0x000C) - -#define IS_TIM_CHANNEL(CHANNEL) (((CHANNEL) == TIM_Channel_1) || \ - ((CHANNEL) == TIM_Channel_2) || \ - ((CHANNEL) == TIM_Channel_3) || \ - ((CHANNEL) == TIM_Channel_4)) - -#define IS_TIM_PWMI_CHANNEL(CHANNEL) (((CHANNEL) == TIM_Channel_1) || \ - ((CHANNEL) == TIM_Channel_2)) -#define IS_TIM_COMPLEMENTARY_CHANNEL(CHANNEL) (((CHANNEL) == TIM_Channel_1) || \ - ((CHANNEL) == TIM_Channel_2) || \ - ((CHANNEL) == TIM_Channel_3)) -/** - * @} - */ - -/** @defgroup TIM_Clock_Division_CKD - * @{ - */ - -#define TIM_CKD_DIV1 ((uint16_t)0x0000) -#define TIM_CKD_DIV2 ((uint16_t)0x0100) -#define TIM_CKD_DIV4 ((uint16_t)0x0200) -#define IS_TIM_CKD_DIV(DIV) (((DIV) == TIM_CKD_DIV1) || \ - ((DIV) == TIM_CKD_DIV2) || \ - ((DIV) == TIM_CKD_DIV4)) -/** - * @} - */ - -/** @defgroup TIM_Counter_Mode - * @{ - */ - -#define TIM_CounterMode_Up ((uint16_t)0x0000) -#define TIM_CounterMode_Down ((uint16_t)0x0010) -#define TIM_CounterMode_CenterAligned1 ((uint16_t)0x0020) -#define TIM_CounterMode_CenterAligned2 ((uint16_t)0x0040) -#define TIM_CounterMode_CenterAligned3 ((uint16_t)0x0060) -#define IS_TIM_COUNTER_MODE(MODE) (((MODE) == TIM_CounterMode_Up) || \ - ((MODE) == TIM_CounterMode_Down) || \ - ((MODE) == TIM_CounterMode_CenterAligned1) || \ - ((MODE) == TIM_CounterMode_CenterAligned2) || \ - ((MODE) == TIM_CounterMode_CenterAligned3)) -/** - * @} - */ - -/** @defgroup TIM_Output_Compare_Polarity - * @{ - */ - -#define TIM_OCPolarity_High ((uint16_t)0x0000) -#define TIM_OCPolarity_Low ((uint16_t)0x0002) -#define IS_TIM_OC_POLARITY(POLARITY) (((POLARITY) == TIM_OCPolarity_High) || \ - ((POLARITY) == TIM_OCPolarity_Low)) -/** - * @} - */ - -/** @defgroup TIM_Output_Compare_N_Polarity - * @{ - */ - -#define TIM_OCNPolarity_High ((uint16_t)0x0000) -#define TIM_OCNPolarity_Low ((uint16_t)0x0008) -#define IS_TIM_OCN_POLARITY(POLARITY) (((POLARITY) == TIM_OCNPolarity_High) || \ - ((POLARITY) == TIM_OCNPolarity_Low)) -/** - * @} - */ - -/** @defgroup TIM_Output_Compare_State - * @{ - */ - -#define TIM_OutputState_Disable ((uint16_t)0x0000) -#define TIM_OutputState_Enable ((uint16_t)0x0001) -#define IS_TIM_OUTPUT_STATE(STATE) (((STATE) == TIM_OutputState_Disable) || \ - ((STATE) == TIM_OutputState_Enable)) -/** - * @} - */ - -/** @defgroup TIM_Output_Compare_N_State - * @{ - */ - -#define TIM_OutputNState_Disable ((uint16_t)0x0000) -#define TIM_OutputNState_Enable ((uint16_t)0x0004) -#define IS_TIM_OUTPUTN_STATE(STATE) (((STATE) == TIM_OutputNState_Disable) || \ - ((STATE) == TIM_OutputNState_Enable)) -/** - * @} - */ - -/** @defgroup TIM_Capture_Compare_State - * @{ - */ - -#define TIM_CCx_Enable ((uint16_t)0x0001) -#define TIM_CCx_Disable ((uint16_t)0x0000) -#define IS_TIM_CCX(CCX) (((CCX) == TIM_CCx_Enable) || \ - ((CCX) == TIM_CCx_Disable)) -/** - * @} - */ - -/** @defgroup TIM_Capture_Compare_N_State - * @{ - */ - -#define TIM_CCxN_Enable ((uint16_t)0x0004) -#define TIM_CCxN_Disable ((uint16_t)0x0000) -#define IS_TIM_CCXN(CCXN) (((CCXN) == TIM_CCxN_Enable) || \ - ((CCXN) == TIM_CCxN_Disable)) -/** - * @} - */ - -/** @defgroup TIM_Break_Input_enable_disable - * @{ - */ - -#define TIM_Break_Enable ((uint16_t)0x1000) -#define TIM_Break_Disable ((uint16_t)0x0000) -#define IS_TIM_BREAK_STATE(STATE) (((STATE) == TIM_Break_Enable) || \ - ((STATE) == TIM_Break_Disable)) -/** - * @} - */ - -/** @defgroup TIM_Break_Polarity - * @{ - */ - -#define TIM_BreakPolarity_Low ((uint16_t)0x0000) -#define TIM_BreakPolarity_High ((uint16_t)0x2000) -#define IS_TIM_BREAK_POLARITY(POLARITY) (((POLARITY) == TIM_BreakPolarity_Low) || \ - ((POLARITY) == TIM_BreakPolarity_High)) -/** - * @} - */ - -/** @defgroup TIM_AOE_Bit_Set_Reset - * @{ - */ - -#define TIM_AutomaticOutput_Enable ((uint16_t)0x4000) -#define TIM_AutomaticOutput_Disable ((uint16_t)0x0000) -#define IS_TIM_AUTOMATIC_OUTPUT_STATE(STATE) (((STATE) == TIM_AutomaticOutput_Enable) || \ - ((STATE) == TIM_AutomaticOutput_Disable)) -/** - * @} - */ - -/** @defgroup TIM_Lock_level - * @{ - */ - -#define TIM_LOCKLevel_OFF ((uint16_t)0x0000) -#define TIM_LOCKLevel_1 ((uint16_t)0x0100) -#define TIM_LOCKLevel_2 ((uint16_t)0x0200) -#define TIM_LOCKLevel_3 ((uint16_t)0x0300) -#define IS_TIM_LOCK_LEVEL(LEVEL) (((LEVEL) == TIM_LOCKLevel_OFF) || \ - ((LEVEL) == TIM_LOCKLevel_1) || \ - ((LEVEL) == TIM_LOCKLevel_2) || \ - ((LEVEL) == TIM_LOCKLevel_3)) -/** - * @} - */ - -/** @defgroup TIM_OSSI_Off_State_Selection_for_Idle_mode_state - * @{ - */ - -#define TIM_OSSIState_Enable ((uint16_t)0x0400) -#define TIM_OSSIState_Disable ((uint16_t)0x0000) -#define IS_TIM_OSSI_STATE(STATE) (((STATE) == TIM_OSSIState_Enable) || \ - ((STATE) == TIM_OSSIState_Disable)) -/** - * @} - */ - -/** @defgroup TIM_OSSR_Off_State_Selection_for_Run_mode_state - * @{ - */ - -#define TIM_OSSRState_Enable ((uint16_t)0x0800) -#define TIM_OSSRState_Disable ((uint16_t)0x0000) -#define IS_TIM_OSSR_STATE(STATE) (((STATE) == TIM_OSSRState_Enable) || \ - ((STATE) == TIM_OSSRState_Disable)) -/** - * @} - */ - -/** @defgroup TIM_Output_Compare_Idle_State - * @{ - */ - -#define TIM_OCIdleState_Set ((uint16_t)0x0100) -#define TIM_OCIdleState_Reset ((uint16_t)0x0000) -#define IS_TIM_OCIDLE_STATE(STATE) (((STATE) == TIM_OCIdleState_Set) || \ - ((STATE) == TIM_OCIdleState_Reset)) -/** - * @} - */ - -/** @defgroup TIM_Output_Compare_N_Idle_State - * @{ - */ - -#define TIM_OCNIdleState_Set ((uint16_t)0x0200) -#define TIM_OCNIdleState_Reset ((uint16_t)0x0000) -#define IS_TIM_OCNIDLE_STATE(STATE) (((STATE) == TIM_OCNIdleState_Set) || \ - ((STATE) == TIM_OCNIdleState_Reset)) -/** - * @} - */ - -/** @defgroup TIM_Input_Capture_Polarity - * @{ - */ - -#define TIM_ICPolarity_Rising ((uint16_t)0x0000) -#define TIM_ICPolarity_Falling ((uint16_t)0x0002) -#define TIM_ICPolarity_BothEdge ((uint16_t)0x000A) -#define IS_TIM_IC_POLARITY(POLARITY) (((POLARITY) == TIM_ICPolarity_Rising) || \ - ((POLARITY) == TIM_ICPolarity_Falling)|| \ - ((POLARITY) == TIM_ICPolarity_BothEdge)) -/** - * @} - */ - -/** @defgroup TIM_Input_Capture_Selection - * @{ - */ - -#define TIM_ICSelection_DirectTI ((uint16_t)0x0001) /*!< TIM Input 1, 2, 3 or 4 is selected to be - connected to IC1, IC2, IC3 or IC4, respectively */ -#define TIM_ICSelection_IndirectTI ((uint16_t)0x0002) /*!< TIM Input 1, 2, 3 or 4 is selected to be - connected to IC2, IC1, IC4 or IC3, respectively. */ -#define TIM_ICSelection_TRC ((uint16_t)0x0003) /*!< TIM Input 1, 2, 3 or 4 is selected to be connected to TRC. */ -#define IS_TIM_IC_SELECTION(SELECTION) (((SELECTION) == TIM_ICSelection_DirectTI) || \ - ((SELECTION) == TIM_ICSelection_IndirectTI) || \ - ((SELECTION) == TIM_ICSelection_TRC)) -/** - * @} - */ - -/** @defgroup TIM_Input_Capture_Prescaler - * @{ - */ - -#define TIM_ICPSC_DIV1 ((uint16_t)0x0000) /*!< Capture performed each time an edge is detected on the capture input. */ -#define TIM_ICPSC_DIV2 ((uint16_t)0x0004) /*!< Capture performed once every 2 events. */ -#define TIM_ICPSC_DIV4 ((uint16_t)0x0008) /*!< Capture performed once every 4 events. */ -#define TIM_ICPSC_DIV8 ((uint16_t)0x000C) /*!< Capture performed once every 8 events. */ -#define IS_TIM_IC_PRESCALER(PRESCALER) (((PRESCALER) == TIM_ICPSC_DIV1) || \ - ((PRESCALER) == TIM_ICPSC_DIV2) || \ - ((PRESCALER) == TIM_ICPSC_DIV4) || \ - ((PRESCALER) == TIM_ICPSC_DIV8)) -/** - * @} - */ - -/** @defgroup TIM_interrupt_sources - * @{ - */ - -#define TIM_IT_Update ((uint16_t)0x0001) -#define TIM_IT_CC1 ((uint16_t)0x0002) -#define TIM_IT_CC2 ((uint16_t)0x0004) -#define TIM_IT_CC3 ((uint16_t)0x0008) -#define TIM_IT_CC4 ((uint16_t)0x0010) -#define TIM_IT_COM ((uint16_t)0x0020) -#define TIM_IT_Trigger ((uint16_t)0x0040) -#define TIM_IT_Break ((uint16_t)0x0080) -#define IS_TIM_IT(IT) ((((IT) & (uint16_t)0xFF00) == 0x0000) && ((IT) != 0x0000)) - -#define IS_TIM_GET_IT(IT) (((IT) == TIM_IT_Update) || \ - ((IT) == TIM_IT_CC1) || \ - ((IT) == TIM_IT_CC2) || \ - ((IT) == TIM_IT_CC3) || \ - ((IT) == TIM_IT_CC4) || \ - ((IT) == TIM_IT_COM) || \ - ((IT) == TIM_IT_Trigger) || \ - ((IT) == TIM_IT_Break)) -/** - * @} - */ - -/** @defgroup TIM_DMA_Base_address - * @{ - */ - -#define TIM_DMABase_CR1 ((uint16_t)0x0000) -#define TIM_DMABase_CR2 ((uint16_t)0x0001) -#define TIM_DMABase_SMCR ((uint16_t)0x0002) -#define TIM_DMABase_DIER ((uint16_t)0x0003) -#define TIM_DMABase_SR ((uint16_t)0x0004) -#define TIM_DMABase_EGR ((uint16_t)0x0005) -#define TIM_DMABase_CCMR1 ((uint16_t)0x0006) -#define TIM_DMABase_CCMR2 ((uint16_t)0x0007) -#define TIM_DMABase_CCER ((uint16_t)0x0008) -#define TIM_DMABase_CNT ((uint16_t)0x0009) -#define TIM_DMABase_PSC ((uint16_t)0x000A) -#define TIM_DMABase_ARR ((uint16_t)0x000B) -#define TIM_DMABase_RCR ((uint16_t)0x000C) -#define TIM_DMABase_CCR1 ((uint16_t)0x000D) -#define TIM_DMABase_CCR2 ((uint16_t)0x000E) -#define TIM_DMABase_CCR3 ((uint16_t)0x000F) -#define TIM_DMABase_CCR4 ((uint16_t)0x0010) -#define TIM_DMABase_BDTR ((uint16_t)0x0011) -#define TIM_DMABase_DCR ((uint16_t)0x0012) -#define TIM_DMABase_OR ((uint16_t)0x0013) -#define IS_TIM_DMA_BASE(BASE) (((BASE) == TIM_DMABase_CR1) || \ - ((BASE) == TIM_DMABase_CR2) || \ - ((BASE) == TIM_DMABase_SMCR) || \ - ((BASE) == TIM_DMABase_DIER) || \ - ((BASE) == TIM_DMABase_SR) || \ - ((BASE) == TIM_DMABase_EGR) || \ - ((BASE) == TIM_DMABase_CCMR1) || \ - ((BASE) == TIM_DMABase_CCMR2) || \ - ((BASE) == TIM_DMABase_CCER) || \ - ((BASE) == TIM_DMABase_CNT) || \ - ((BASE) == TIM_DMABase_PSC) || \ - ((BASE) == TIM_DMABase_ARR) || \ - ((BASE) == TIM_DMABase_RCR) || \ - ((BASE) == TIM_DMABase_CCR1) || \ - ((BASE) == TIM_DMABase_CCR2) || \ - ((BASE) == TIM_DMABase_CCR3) || \ - ((BASE) == TIM_DMABase_CCR4) || \ - ((BASE) == TIM_DMABase_BDTR) || \ - ((BASE) == TIM_DMABase_DCR) || \ - ((BASE) == TIM_DMABase_OR)) -/** - * @} - */ - -/** @defgroup TIM_DMA_Burst_Length - * @{ - */ - -#define TIM_DMABurstLength_1Transfer ((uint16_t)0x0000) -#define TIM_DMABurstLength_2Transfers ((uint16_t)0x0100) -#define TIM_DMABurstLength_3Transfers ((uint16_t)0x0200) -#define TIM_DMABurstLength_4Transfers ((uint16_t)0x0300) -#define TIM_DMABurstLength_5Transfers ((uint16_t)0x0400) -#define TIM_DMABurstLength_6Transfers ((uint16_t)0x0500) -#define TIM_DMABurstLength_7Transfers ((uint16_t)0x0600) -#define TIM_DMABurstLength_8Transfers ((uint16_t)0x0700) -#define TIM_DMABurstLength_9Transfers ((uint16_t)0x0800) -#define TIM_DMABurstLength_10Transfers ((uint16_t)0x0900) -#define TIM_DMABurstLength_11Transfers ((uint16_t)0x0A00) -#define TIM_DMABurstLength_12Transfers ((uint16_t)0x0B00) -#define TIM_DMABurstLength_13Transfers ((uint16_t)0x0C00) -#define TIM_DMABurstLength_14Transfers ((uint16_t)0x0D00) -#define TIM_DMABurstLength_15Transfers ((uint16_t)0x0E00) -#define TIM_DMABurstLength_16Transfers ((uint16_t)0x0F00) -#define TIM_DMABurstLength_17Transfers ((uint16_t)0x1000) -#define TIM_DMABurstLength_18Transfers ((uint16_t)0x1100) -#define IS_TIM_DMA_LENGTH(LENGTH) (((LENGTH) == TIM_DMABurstLength_1Transfer) || \ - ((LENGTH) == TIM_DMABurstLength_2Transfers) || \ - ((LENGTH) == TIM_DMABurstLength_3Transfers) || \ - ((LENGTH) == TIM_DMABurstLength_4Transfers) || \ - ((LENGTH) == TIM_DMABurstLength_5Transfers) || \ - ((LENGTH) == TIM_DMABurstLength_6Transfers) || \ - ((LENGTH) == TIM_DMABurstLength_7Transfers) || \ - ((LENGTH) == TIM_DMABurstLength_8Transfers) || \ - ((LENGTH) == TIM_DMABurstLength_9Transfers) || \ - ((LENGTH) == TIM_DMABurstLength_10Transfers) || \ - ((LENGTH) == TIM_DMABurstLength_11Transfers) || \ - ((LENGTH) == TIM_DMABurstLength_12Transfers) || \ - ((LENGTH) == TIM_DMABurstLength_13Transfers) || \ - ((LENGTH) == TIM_DMABurstLength_14Transfers) || \ - ((LENGTH) == TIM_DMABurstLength_15Transfers) || \ - ((LENGTH) == TIM_DMABurstLength_16Transfers) || \ - ((LENGTH) == TIM_DMABurstLength_17Transfers) || \ - ((LENGTH) == TIM_DMABurstLength_18Transfers)) -/** - * @} - */ - -/** @defgroup TIM_DMA_sources - * @{ - */ - -#define TIM_DMA_Update ((uint16_t)0x0100) -#define TIM_DMA_CC1 ((uint16_t)0x0200) -#define TIM_DMA_CC2 ((uint16_t)0x0400) -#define TIM_DMA_CC3 ((uint16_t)0x0800) -#define TIM_DMA_CC4 ((uint16_t)0x1000) -#define TIM_DMA_COM ((uint16_t)0x2000) -#define TIM_DMA_Trigger ((uint16_t)0x4000) -#define IS_TIM_DMA_SOURCE(SOURCE) ((((SOURCE) & (uint16_t)0x80FF) == 0x0000) && ((SOURCE) != 0x0000)) - -/** - * @} - */ - -/** @defgroup TIM_External_Trigger_Prescaler - * @{ - */ - -#define TIM_ExtTRGPSC_OFF ((uint16_t)0x0000) -#define TIM_ExtTRGPSC_DIV2 ((uint16_t)0x1000) -#define TIM_ExtTRGPSC_DIV4 ((uint16_t)0x2000) -#define TIM_ExtTRGPSC_DIV8 ((uint16_t)0x3000) -#define IS_TIM_EXT_PRESCALER(PRESCALER) (((PRESCALER) == TIM_ExtTRGPSC_OFF) || \ - ((PRESCALER) == TIM_ExtTRGPSC_DIV2) || \ - ((PRESCALER) == TIM_ExtTRGPSC_DIV4) || \ - ((PRESCALER) == TIM_ExtTRGPSC_DIV8)) -/** - * @} - */ - -/** @defgroup TIM_Internal_Trigger_Selection - * @{ - */ - -#define TIM_TS_ITR0 ((uint16_t)0x0000) -#define TIM_TS_ITR1 ((uint16_t)0x0010) -#define TIM_TS_ITR2 ((uint16_t)0x0020) -#define TIM_TS_ITR3 ((uint16_t)0x0030) -#define TIM_TS_TI1F_ED ((uint16_t)0x0040) -#define TIM_TS_TI1FP1 ((uint16_t)0x0050) -#define TIM_TS_TI2FP2 ((uint16_t)0x0060) -#define TIM_TS_ETRF ((uint16_t)0x0070) -#define IS_TIM_TRIGGER_SELECTION(SELECTION) (((SELECTION) == TIM_TS_ITR0) || \ - ((SELECTION) == TIM_TS_ITR1) || \ - ((SELECTION) == TIM_TS_ITR2) || \ - ((SELECTION) == TIM_TS_ITR3) || \ - ((SELECTION) == TIM_TS_TI1F_ED) || \ - ((SELECTION) == TIM_TS_TI1FP1) || \ - ((SELECTION) == TIM_TS_TI2FP2) || \ - ((SELECTION) == TIM_TS_ETRF)) -#define IS_TIM_INTERNAL_TRIGGER_SELECTION(SELECTION) (((SELECTION) == TIM_TS_ITR0) || \ - ((SELECTION) == TIM_TS_ITR1) || \ - ((SELECTION) == TIM_TS_ITR2) || \ - ((SELECTION) == TIM_TS_ITR3)) -/** - * @} - */ - -/** @defgroup TIM_TIx_External_Clock_Source - * @{ - */ - -#define TIM_TIxExternalCLK1Source_TI1 ((uint16_t)0x0050) -#define TIM_TIxExternalCLK1Source_TI2 ((uint16_t)0x0060) -#define TIM_TIxExternalCLK1Source_TI1ED ((uint16_t)0x0040) - -/** - * @} - */ - -/** @defgroup TIM_External_Trigger_Polarity - * @{ - */ -#define TIM_ExtTRGPolarity_Inverted ((uint16_t)0x8000) -#define TIM_ExtTRGPolarity_NonInverted ((uint16_t)0x0000) -#define IS_TIM_EXT_POLARITY(POLARITY) (((POLARITY) == TIM_ExtTRGPolarity_Inverted) || \ - ((POLARITY) == TIM_ExtTRGPolarity_NonInverted)) -/** - * @} - */ - -/** @defgroup TIM_Prescaler_Reload_Mode - * @{ - */ - -#define TIM_PSCReloadMode_Update ((uint16_t)0x0000) -#define TIM_PSCReloadMode_Immediate ((uint16_t)0x0001) -#define IS_TIM_PRESCALER_RELOAD(RELOAD) (((RELOAD) == TIM_PSCReloadMode_Update) || \ - ((RELOAD) == TIM_PSCReloadMode_Immediate)) -/** - * @} - */ - -/** @defgroup TIM_Forced_Action - * @{ - */ - -#define TIM_ForcedAction_Active ((uint16_t)0x0050) -#define TIM_ForcedAction_InActive ((uint16_t)0x0040) -#define IS_TIM_FORCED_ACTION(ACTION) (((ACTION) == TIM_ForcedAction_Active) || \ - ((ACTION) == TIM_ForcedAction_InActive)) -/** - * @} - */ - -/** @defgroup TIM_Encoder_Mode - * @{ - */ - -#define TIM_EncoderMode_TI1 ((uint16_t)0x0001) -#define TIM_EncoderMode_TI2 ((uint16_t)0x0002) -#define TIM_EncoderMode_TI12 ((uint16_t)0x0003) -#define IS_TIM_ENCODER_MODE(MODE) (((MODE) == TIM_EncoderMode_TI1) || \ - ((MODE) == TIM_EncoderMode_TI2) || \ - ((MODE) == TIM_EncoderMode_TI12)) -/** - * @} - */ - - -/** @defgroup TIM_Event_Source - * @{ - */ - -#define TIM_EventSource_Update ((uint16_t)0x0001) -#define TIM_EventSource_CC1 ((uint16_t)0x0002) -#define TIM_EventSource_CC2 ((uint16_t)0x0004) -#define TIM_EventSource_CC3 ((uint16_t)0x0008) -#define TIM_EventSource_CC4 ((uint16_t)0x0010) -#define TIM_EventSource_COM ((uint16_t)0x0020) -#define TIM_EventSource_Trigger ((uint16_t)0x0040) -#define TIM_EventSource_Break ((uint16_t)0x0080) -#define IS_TIM_EVENT_SOURCE(SOURCE) ((((SOURCE) & (uint16_t)0xFF00) == 0x0000) && ((SOURCE) != 0x0000)) - -/** - * @} - */ - -/** @defgroup TIM_Update_Source - * @{ - */ - -#define TIM_UpdateSource_Global ((uint16_t)0x0000) /*!< Source of update is the counter overflow/underflow - or the setting of UG bit, or an update generation - through the slave mode controller. */ -#define TIM_UpdateSource_Regular ((uint16_t)0x0001) /*!< Source of update is counter overflow/underflow. */ -#define IS_TIM_UPDATE_SOURCE(SOURCE) (((SOURCE) == TIM_UpdateSource_Global) || \ - ((SOURCE) == TIM_UpdateSource_Regular)) -/** - * @} - */ - -/** @defgroup TIM_Output_Compare_Preload_State - * @{ - */ - -#define TIM_OCPreload_Enable ((uint16_t)0x0008) -#define TIM_OCPreload_Disable ((uint16_t)0x0000) -#define IS_TIM_OCPRELOAD_STATE(STATE) (((STATE) == TIM_OCPreload_Enable) || \ - ((STATE) == TIM_OCPreload_Disable)) -/** - * @} - */ - -/** @defgroup TIM_Output_Compare_Fast_State - * @{ - */ - -#define TIM_OCFast_Enable ((uint16_t)0x0004) -#define TIM_OCFast_Disable ((uint16_t)0x0000) -#define IS_TIM_OCFAST_STATE(STATE) (((STATE) == TIM_OCFast_Enable) || \ - ((STATE) == TIM_OCFast_Disable)) - -/** - * @} - */ - -/** @defgroup TIM_Output_Compare_Clear_State - * @{ - */ - -#define TIM_OCClear_Enable ((uint16_t)0x0080) -#define TIM_OCClear_Disable ((uint16_t)0x0000) -#define IS_TIM_OCCLEAR_STATE(STATE) (((STATE) == TIM_OCClear_Enable) || \ - ((STATE) == TIM_OCClear_Disable)) -/** - * @} - */ - -/** @defgroup TIM_Trigger_Output_Source - * @{ - */ - -#define TIM_TRGOSource_Reset ((uint16_t)0x0000) -#define TIM_TRGOSource_Enable ((uint16_t)0x0010) -#define TIM_TRGOSource_Update ((uint16_t)0x0020) -#define TIM_TRGOSource_OC1 ((uint16_t)0x0030) -#define TIM_TRGOSource_OC1Ref ((uint16_t)0x0040) -#define TIM_TRGOSource_OC2Ref ((uint16_t)0x0050) -#define TIM_TRGOSource_OC3Ref ((uint16_t)0x0060) -#define TIM_TRGOSource_OC4Ref ((uint16_t)0x0070) -#define IS_TIM_TRGO_SOURCE(SOURCE) (((SOURCE) == TIM_TRGOSource_Reset) || \ - ((SOURCE) == TIM_TRGOSource_Enable) || \ - ((SOURCE) == TIM_TRGOSource_Update) || \ - ((SOURCE) == TIM_TRGOSource_OC1) || \ - ((SOURCE) == TIM_TRGOSource_OC1Ref) || \ - ((SOURCE) == TIM_TRGOSource_OC2Ref) || \ - ((SOURCE) == TIM_TRGOSource_OC3Ref) || \ - ((SOURCE) == TIM_TRGOSource_OC4Ref)) -/** - * @} - */ - -/** @defgroup TIM_Slave_Mode - * @{ - */ - -#define TIM_SlaveMode_Reset ((uint16_t)0x0004) -#define TIM_SlaveMode_Gated ((uint16_t)0x0005) -#define TIM_SlaveMode_Trigger ((uint16_t)0x0006) -#define TIM_SlaveMode_External1 ((uint16_t)0x0007) -#define IS_TIM_SLAVE_MODE(MODE) (((MODE) == TIM_SlaveMode_Reset) || \ - ((MODE) == TIM_SlaveMode_Gated) || \ - ((MODE) == TIM_SlaveMode_Trigger) || \ - ((MODE) == TIM_SlaveMode_External1)) -/** - * @} - */ - -/** @defgroup TIM_Master_Slave_Mode - * @{ - */ - -#define TIM_MasterSlaveMode_Enable ((uint16_t)0x0080) -#define TIM_MasterSlaveMode_Disable ((uint16_t)0x0000) -#define IS_TIM_MSM_STATE(STATE) (((STATE) == TIM_MasterSlaveMode_Enable) || \ - ((STATE) == TIM_MasterSlaveMode_Disable)) -/** - * @} - */ -/** @defgroup TIM_Remap - * @{ - */ - -#define TIM2_TIM8_TRGO ((uint16_t)0x0000) -#define TIM2_ETH_PTP ((uint16_t)0x0400) -#define TIM2_USBFS_SOF ((uint16_t)0x0800) -#define TIM2_USBHS_SOF ((uint16_t)0x0C00) - -#define TIM5_GPIO ((uint16_t)0x0000) -#define TIM5_LSI ((uint16_t)0x0040) -#define TIM5_LSE ((uint16_t)0x0080) -#define TIM5_RTC ((uint16_t)0x00C0) - -#define TIM11_GPIO ((uint16_t)0x0000) -#define TIM11_HSE ((uint16_t)0x0002) - -#define IS_TIM_REMAP(TIM_REMAP) (((TIM_REMAP) == TIM2_TIM8_TRGO)||\ - ((TIM_REMAP) == TIM2_ETH_PTP)||\ - ((TIM_REMAP) == TIM2_USBFS_SOF)||\ - ((TIM_REMAP) == TIM2_USBHS_SOF)||\ - ((TIM_REMAP) == TIM5_GPIO)||\ - ((TIM_REMAP) == TIM5_LSI)||\ - ((TIM_REMAP) == TIM5_LSE)||\ - ((TIM_REMAP) == TIM5_RTC)||\ - ((TIM_REMAP) == TIM11_GPIO)||\ - ((TIM_REMAP) == TIM11_HSE)) - -/** - * @} - */ -/** @defgroup TIM_Flags - * @{ - */ - -#define TIM_FLAG_Update ((uint16_t)0x0001) -#define TIM_FLAG_CC1 ((uint16_t)0x0002) -#define TIM_FLAG_CC2 ((uint16_t)0x0004) -#define TIM_FLAG_CC3 ((uint16_t)0x0008) -#define TIM_FLAG_CC4 ((uint16_t)0x0010) -#define TIM_FLAG_COM ((uint16_t)0x0020) -#define TIM_FLAG_Trigger ((uint16_t)0x0040) -#define TIM_FLAG_Break ((uint16_t)0x0080) -#define TIM_FLAG_CC1OF ((uint16_t)0x0200) -#define TIM_FLAG_CC2OF ((uint16_t)0x0400) -#define TIM_FLAG_CC3OF ((uint16_t)0x0800) -#define TIM_FLAG_CC4OF ((uint16_t)0x1000) -#define IS_TIM_GET_FLAG(FLAG) (((FLAG) == TIM_FLAG_Update) || \ - ((FLAG) == TIM_FLAG_CC1) || \ - ((FLAG) == TIM_FLAG_CC2) || \ - ((FLAG) == TIM_FLAG_CC3) || \ - ((FLAG) == TIM_FLAG_CC4) || \ - ((FLAG) == TIM_FLAG_COM) || \ - ((FLAG) == TIM_FLAG_Trigger) || \ - ((FLAG) == TIM_FLAG_Break) || \ - ((FLAG) == TIM_FLAG_CC1OF) || \ - ((FLAG) == TIM_FLAG_CC2OF) || \ - ((FLAG) == TIM_FLAG_CC3OF) || \ - ((FLAG) == TIM_FLAG_CC4OF)) - -/** - * @} - */ - -/** @defgroup TIM_Input_Capture_Filer_Value - * @{ - */ - -#define IS_TIM_IC_FILTER(ICFILTER) ((ICFILTER) <= 0xF) -/** - * @} - */ - -/** @defgroup TIM_External_Trigger_Filter - * @{ - */ - -#define IS_TIM_EXT_FILTER(EXTFILTER) ((EXTFILTER) <= 0xF) -/** - * @} - */ - -/** @defgroup TIM_Legacy - * @{ - */ - -#define TIM_DMABurstLength_1Byte TIM_DMABurstLength_1Transfer -#define TIM_DMABurstLength_2Bytes TIM_DMABurstLength_2Transfers -#define TIM_DMABurstLength_3Bytes TIM_DMABurstLength_3Transfers -#define TIM_DMABurstLength_4Bytes TIM_DMABurstLength_4Transfers -#define TIM_DMABurstLength_5Bytes TIM_DMABurstLength_5Transfers -#define TIM_DMABurstLength_6Bytes TIM_DMABurstLength_6Transfers -#define TIM_DMABurstLength_7Bytes TIM_DMABurstLength_7Transfers -#define TIM_DMABurstLength_8Bytes TIM_DMABurstLength_8Transfers -#define TIM_DMABurstLength_9Bytes TIM_DMABurstLength_9Transfers -#define TIM_DMABurstLength_10Bytes TIM_DMABurstLength_10Transfers -#define TIM_DMABurstLength_11Bytes TIM_DMABurstLength_11Transfers -#define TIM_DMABurstLength_12Bytes TIM_DMABurstLength_12Transfers -#define TIM_DMABurstLength_13Bytes TIM_DMABurstLength_13Transfers -#define TIM_DMABurstLength_14Bytes TIM_DMABurstLength_14Transfers -#define TIM_DMABurstLength_15Bytes TIM_DMABurstLength_15Transfers -#define TIM_DMABurstLength_16Bytes TIM_DMABurstLength_16Transfers -#define TIM_DMABurstLength_17Bytes TIM_DMABurstLength_17Transfers -#define TIM_DMABurstLength_18Bytes TIM_DMABurstLength_18Transfers -/** - * @} - */ - -/** - * @} - */ - -/* Exported macro ------------------------------------------------------------*/ -/* Exported functions --------------------------------------------------------*/ - -/* TimeBase management ********************************************************/ -void TIM_DeInit(TIM_TypeDef* TIMx); -void TIM_TimeBaseInit(TIM_TypeDef* TIMx, TIM_TimeBaseInitTypeDef* TIM_TimeBaseInitStruct); -void TIM_TimeBaseStructInit(TIM_TimeBaseInitTypeDef* TIM_TimeBaseInitStruct); -void TIM_PrescalerConfig(TIM_TypeDef* TIMx, uint16_t Prescaler, uint16_t TIM_PSCReloadMode); -void TIM_CounterModeConfig(TIM_TypeDef* TIMx, uint16_t TIM_CounterMode); -void TIM_SetCounter(TIM_TypeDef* TIMx, uint32_t Counter); -void TIM_SetAutoreload(TIM_TypeDef* TIMx, uint32_t Autoreload); -uint32_t TIM_GetCounter(TIM_TypeDef* TIMx); -uint16_t TIM_GetPrescaler(TIM_TypeDef* TIMx); -void TIM_UpdateDisableConfig(TIM_TypeDef* TIMx, FunctionalState NewState); -void TIM_UpdateRequestConfig(TIM_TypeDef* TIMx, uint16_t TIM_UpdateSource); -void TIM_ARRPreloadConfig(TIM_TypeDef* TIMx, FunctionalState NewState); -void TIM_SelectOnePulseMode(TIM_TypeDef* TIMx, uint16_t TIM_OPMode); -void TIM_SetClockDivision(TIM_TypeDef* TIMx, uint16_t TIM_CKD); -void TIM_Cmd(TIM_TypeDef* TIMx, FunctionalState NewState); - -/* Output Compare management **************************************************/ -void TIM_OC1Init(TIM_TypeDef* TIMx, TIM_OCInitTypeDef* TIM_OCInitStruct); -void TIM_OC2Init(TIM_TypeDef* TIMx, TIM_OCInitTypeDef* TIM_OCInitStruct); -void TIM_OC3Init(TIM_TypeDef* TIMx, TIM_OCInitTypeDef* TIM_OCInitStruct); -void TIM_OC4Init(TIM_TypeDef* TIMx, TIM_OCInitTypeDef* TIM_OCInitStruct); -void TIM_OCStructInit(TIM_OCInitTypeDef* TIM_OCInitStruct); -void TIM_SelectOCxM(TIM_TypeDef* TIMx, uint16_t TIM_Channel, uint16_t TIM_OCMode); -void TIM_SetCompare1(TIM_TypeDef* TIMx, uint32_t Compare1); -void TIM_SetCompare2(TIM_TypeDef* TIMx, uint32_t Compare2); -void TIM_SetCompare3(TIM_TypeDef* TIMx, uint32_t Compare3); -void TIM_SetCompare4(TIM_TypeDef* TIMx, uint32_t Compare4); -void TIM_ForcedOC1Config(TIM_TypeDef* TIMx, uint16_t TIM_ForcedAction); -void TIM_ForcedOC2Config(TIM_TypeDef* TIMx, uint16_t TIM_ForcedAction); -void TIM_ForcedOC3Config(TIM_TypeDef* TIMx, uint16_t TIM_ForcedAction); -void TIM_ForcedOC4Config(TIM_TypeDef* TIMx, uint16_t TIM_ForcedAction); -void TIM_OC1PreloadConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCPreload); -void TIM_OC2PreloadConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCPreload); -void TIM_OC3PreloadConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCPreload); -void TIM_OC4PreloadConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCPreload); -void TIM_OC1FastConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCFast); -void TIM_OC2FastConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCFast); -void TIM_OC3FastConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCFast); -void TIM_OC4FastConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCFast); -void TIM_ClearOC1Ref(TIM_TypeDef* TIMx, uint16_t TIM_OCClear); -void TIM_ClearOC2Ref(TIM_TypeDef* TIMx, uint16_t TIM_OCClear); -void TIM_ClearOC3Ref(TIM_TypeDef* TIMx, uint16_t TIM_OCClear); -void TIM_ClearOC4Ref(TIM_TypeDef* TIMx, uint16_t TIM_OCClear); -void TIM_OC1PolarityConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCPolarity); -void TIM_OC1NPolarityConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCNPolarity); -void TIM_OC2PolarityConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCPolarity); -void TIM_OC2NPolarityConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCNPolarity); -void TIM_OC3PolarityConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCPolarity); -void TIM_OC3NPolarityConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCNPolarity); -void TIM_OC4PolarityConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCPolarity); -void TIM_CCxCmd(TIM_TypeDef* TIMx, uint16_t TIM_Channel, uint16_t TIM_CCx); -void TIM_CCxNCmd(TIM_TypeDef* TIMx, uint16_t TIM_Channel, uint16_t TIM_CCxN); - -/* Input Capture management ***************************************************/ -void TIM_ICInit(TIM_TypeDef* TIMx, TIM_ICInitTypeDef* TIM_ICInitStruct); -void TIM_ICStructInit(TIM_ICInitTypeDef* TIM_ICInitStruct); -void TIM_PWMIConfig(TIM_TypeDef* TIMx, TIM_ICInitTypeDef* TIM_ICInitStruct); -uint32_t TIM_GetCapture1(TIM_TypeDef* TIMx); -uint32_t TIM_GetCapture2(TIM_TypeDef* TIMx); -uint32_t TIM_GetCapture3(TIM_TypeDef* TIMx); -uint32_t TIM_GetCapture4(TIM_TypeDef* TIMx); -void TIM_SetIC1Prescaler(TIM_TypeDef* TIMx, uint16_t TIM_ICPSC); -void TIM_SetIC2Prescaler(TIM_TypeDef* TIMx, uint16_t TIM_ICPSC); -void TIM_SetIC3Prescaler(TIM_TypeDef* TIMx, uint16_t TIM_ICPSC); -void TIM_SetIC4Prescaler(TIM_TypeDef* TIMx, uint16_t TIM_ICPSC); - -/* Advanced-control timers (TIM1 and TIM8) specific features ******************/ -void TIM_BDTRConfig(TIM_TypeDef* TIMx, TIM_BDTRInitTypeDef *TIM_BDTRInitStruct); -void TIM_BDTRStructInit(TIM_BDTRInitTypeDef* TIM_BDTRInitStruct); -void TIM_CtrlPWMOutputs(TIM_TypeDef* TIMx, FunctionalState NewState); -void TIM_SelectCOM(TIM_TypeDef* TIMx, FunctionalState NewState); -void TIM_CCPreloadControl(TIM_TypeDef* TIMx, FunctionalState NewState); - -/* Interrupts, DMA and flags management ***************************************/ -void TIM_ITConfig(TIM_TypeDef* TIMx, uint16_t TIM_IT, FunctionalState NewState); -void TIM_GenerateEvent(TIM_TypeDef* TIMx, uint16_t TIM_EventSource); -FlagStatus TIM_GetFlagStatus(TIM_TypeDef* TIMx, uint16_t TIM_FLAG); -void TIM_ClearFlag(TIM_TypeDef* TIMx, uint16_t TIM_FLAG); -ITStatus TIM_GetITStatus(TIM_TypeDef* TIMx, uint16_t TIM_IT); -void TIM_ClearITPendingBit(TIM_TypeDef* TIMx, uint16_t TIM_IT); -void TIM_DMAConfig(TIM_TypeDef* TIMx, uint16_t TIM_DMABase, uint16_t TIM_DMABurstLength); -void TIM_DMACmd(TIM_TypeDef* TIMx, uint16_t TIM_DMASource, FunctionalState NewState); -void TIM_SelectCCDMA(TIM_TypeDef* TIMx, FunctionalState NewState); - -/* Clocks management **********************************************************/ -void TIM_InternalClockConfig(TIM_TypeDef* TIMx); -void TIM_ITRxExternalClockConfig(TIM_TypeDef* TIMx, uint16_t TIM_InputTriggerSource); -void TIM_TIxExternalClockConfig(TIM_TypeDef* TIMx, uint16_t TIM_TIxExternalCLKSource, - uint16_t TIM_ICPolarity, uint16_t ICFilter); -void TIM_ETRClockMode1Config(TIM_TypeDef* TIMx, uint16_t TIM_ExtTRGPrescaler, uint16_t TIM_ExtTRGPolarity, - uint16_t ExtTRGFilter); -void TIM_ETRClockMode2Config(TIM_TypeDef* TIMx, uint16_t TIM_ExtTRGPrescaler, - uint16_t TIM_ExtTRGPolarity, uint16_t ExtTRGFilter); - -/* Synchronization management *************************************************/ -void TIM_SelectInputTrigger(TIM_TypeDef* TIMx, uint16_t TIM_InputTriggerSource); -void TIM_SelectOutputTrigger(TIM_TypeDef* TIMx, uint16_t TIM_TRGOSource); -void TIM_SelectSlaveMode(TIM_TypeDef* TIMx, uint16_t TIM_SlaveMode); -void TIM_SelectMasterSlaveMode(TIM_TypeDef* TIMx, uint16_t TIM_MasterSlaveMode); -void TIM_ETRConfig(TIM_TypeDef* TIMx, uint16_t TIM_ExtTRGPrescaler, uint16_t TIM_ExtTRGPolarity, - uint16_t ExtTRGFilter); - -/* Specific interface management **********************************************/ -void TIM_EncoderInterfaceConfig(TIM_TypeDef* TIMx, uint16_t TIM_EncoderMode, - uint16_t TIM_IC1Polarity, uint16_t TIM_IC2Polarity); -void TIM_SelectHallSensor(TIM_TypeDef* TIMx, FunctionalState NewState); - -/* Specific remapping management **********************************************/ -void TIM_RemapConfig(TIM_TypeDef* TIMx, uint16_t TIM_Remap); - -#ifdef __cplusplus -} -#endif - -#endif /*__STM32F4xx_TIM_H */ - -/** - * @} - */ - -/** - * @} - */ - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/stm/lib/stm32f4xx_usart.c b/stm/lib/stm32f4xx_usart.c deleted file mode 100644 index f786c942c..000000000 --- a/stm/lib/stm32f4xx_usart.c +++ /dev/null @@ -1,1486 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f4xx_usart.c - * @author MCD Application Team - * @version V1.3.0 - * @date 08-November-2013 - * @brief This file provides firmware functions to manage the following - * functionalities of the Universal synchronous asynchronous receiver - * transmitter (USART): - * + Initialization and Configuration - * + Data transfers - * + Multi-Processor Communication - * + LIN mode - * + Half-duplex mode - * + Smartcard mode - * + IrDA mode - * + DMA transfers management - * + Interrupts and flags management - * - @verbatim - =============================================================================== - ##### How to use this driver ##### - =============================================================================== - [..] - (#) Enable peripheral clock using the following functions - RCC_APB2PeriphClockCmd(RCC_APB2Periph_USARTx, ENABLE) for USART1 and USART6 - RCC_APB1PeriphClockCmd(RCC_APB1Periph_USARTx, ENABLE) for USART2, USART3, - UART4 or UART5. - - (#) According to the USART mode, enable the GPIO clocks using - RCC_AHB1PeriphClockCmd() function. (The I/O can be TX, RX, CTS, - or/and SCLK). - - (#) Peripheral's alternate function: - (++) Connect the pin to the desired peripherals' Alternate - Function (AF) using GPIO_PinAFConfig() function - (++) Configure the desired pin in alternate function by: - GPIO_InitStruct->GPIO_Mode = GPIO_Mode_AF - (++) Select the type, pull-up/pull-down and output speed via - GPIO_PuPd, GPIO_OType and GPIO_Speed members - (++) Call GPIO_Init() function - - (#) Program the Baud Rate, Word Length , Stop Bit, Parity, Hardware - flow control and Mode(Receiver/Transmitter) using the USART_Init() - function. - - (#) For synchronous mode, enable the clock and program the polarity, - phase and last bit using the USART_ClockInit() function. - - (#) Enable the NVIC and the corresponding interrupt using the function - USART_ITConfig() if you need to use interrupt mode. - - (#) When using the DMA mode - (++) Configure the DMA using DMA_Init() function - (++) Active the needed channel Request using USART_DMACmd() function - - (#) Enable the USART using the USART_Cmd() function. - - (#) Enable the DMA using the DMA_Cmd() function, when using DMA mode. - - -@- Refer to Multi-Processor, LIN, half-duplex, Smartcard, IrDA sub-sections - for more details - - [..] - In order to reach higher communication baudrates, it is possible to - enable the oversampling by 8 mode using the function USART_OverSampling8Cmd(). - This function should be called after enabling the USART clock (RCC_APBxPeriphClockCmd()) - and before calling the function USART_Init(). - - @endverbatim - ****************************************************************************** - * @attention - * - *

© COPYRIGHT 2013 STMicroelectronics

- * - * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License"); - * You may not use this file except in compliance with the License. - * You may obtain a copy of the License at: - * - * http://www.st.com/software_license_agreement_liberty_v2 - * - * Unless required by applicable law or agreed to in writing, software - * distributed under the License is distributed on an "AS IS" BASIS, - * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - * See the License for the specific language governing permissions and - * limitations under the License. - * - ****************************************************************************** - */ - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx_usart.h" -#include "stm32f4xx_rcc.h" - -/** @addtogroup STM32F4xx_StdPeriph_Driver - * @{ - */ - -/** @defgroup USART - * @brief USART driver modules - * @{ - */ - -/* Private typedef -----------------------------------------------------------*/ -/* Private define ------------------------------------------------------------*/ - -/*!< USART CR1 register clear Mask ((~(uint16_t)0xE9F3)) */ -#define CR1_CLEAR_MASK ((uint16_t)(USART_CR1_M | USART_CR1_PCE | \ - USART_CR1_PS | USART_CR1_TE | \ - USART_CR1_RE)) - -/*!< USART CR2 register clock bits clear Mask ((~(uint16_t)0xF0FF)) */ -#define CR2_CLOCK_CLEAR_MASK ((uint16_t)(USART_CR2_CLKEN | USART_CR2_CPOL | \ - USART_CR2_CPHA | USART_CR2_LBCL)) - -/*!< USART CR3 register clear Mask ((~(uint16_t)0xFCFF)) */ -#define CR3_CLEAR_MASK ((uint16_t)(USART_CR3_RTSE | USART_CR3_CTSE)) - -/*!< USART Interrupts mask */ -#define IT_MASK ((uint16_t)0x001F) - -/* Private macro -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -/* Private function prototypes -----------------------------------------------*/ -/* Private functions ---------------------------------------------------------*/ - -/** @defgroup USART_Private_Functions - * @{ - */ - -/** @defgroup USART_Group1 Initialization and Configuration functions - * @brief Initialization and Configuration functions - * -@verbatim - =============================================================================== - ##### Initialization and Configuration functions ##### - =============================================================================== - [..] - This subsection provides a set of functions allowing to initialize the USART - in asynchronous and in synchronous modes. - (+) For the asynchronous mode only these parameters can be configured: - (++) Baud Rate - (++) Word Length - (++) Stop Bit - (++) Parity: If the parity is enabled, then the MSB bit of the data written - in the data register is transmitted but is changed by the parity bit. - Depending on the frame length defined by the M bit (8-bits or 9-bits), - the possible USART frame formats are as listed in the following table: - +-------------------------------------------------------------+ - | M bit | PCE bit | USART frame | - |---------------------|---------------------------------------| - | 0 | 0 | | SB | 8 bit data | STB | | - |---------|-----------|---------------------------------------| - | 0 | 1 | | SB | 7 bit data | PB | STB | | - |---------|-----------|---------------------------------------| - | 1 | 0 | | SB | 9 bit data | STB | | - |---------|-----------|---------------------------------------| - | 1 | 1 | | SB | 8 bit data | PB | STB | | - +-------------------------------------------------------------+ - (++) Hardware flow control - (++) Receiver/transmitter modes - - [..] - The USART_Init() function follows the USART asynchronous configuration - procedure (details for the procedure are available in reference manual (RM0090)). - - (+) For the synchronous mode in addition to the asynchronous mode parameters these - parameters should be also configured: - (++) USART Clock Enabled - (++) USART polarity - (++) USART phase - (++) USART LastBit - - [..] - These parameters can be configured using the USART_ClockInit() function. - -@endverbatim - * @{ - */ - -/** - * @brief Deinitializes the USARTx peripheral registers to their default reset values. - * @param USARTx: where x can be 1, 2, 3, 4, 5, 6, 7 or 8 to select the USART or - * UART peripheral. - * @retval None - */ -void USART_DeInit(USART_TypeDef* USARTx) -{ - /* Check the parameters */ - assert_param(IS_USART_ALL_PERIPH(USARTx)); - - if (USARTx == USART1) - { - RCC_APB2PeriphResetCmd(RCC_APB2Periph_USART1, ENABLE); - RCC_APB2PeriphResetCmd(RCC_APB2Periph_USART1, DISABLE); - } - else if (USARTx == USART2) - { - RCC_APB1PeriphResetCmd(RCC_APB1Periph_USART2, ENABLE); - RCC_APB1PeriphResetCmd(RCC_APB1Periph_USART2, DISABLE); - } - else if (USARTx == USART3) - { - RCC_APB1PeriphResetCmd(RCC_APB1Periph_USART3, ENABLE); - RCC_APB1PeriphResetCmd(RCC_APB1Periph_USART3, DISABLE); - } - else if (USARTx == UART4) - { - RCC_APB1PeriphResetCmd(RCC_APB1Periph_UART4, ENABLE); - RCC_APB1PeriphResetCmd(RCC_APB1Periph_UART4, DISABLE); - } - else if (USARTx == UART5) - { - RCC_APB1PeriphResetCmd(RCC_APB1Periph_UART5, ENABLE); - RCC_APB1PeriphResetCmd(RCC_APB1Periph_UART5, DISABLE); - } - else if (USARTx == USART6) - { - RCC_APB2PeriphResetCmd(RCC_APB2Periph_USART6, ENABLE); - RCC_APB2PeriphResetCmd(RCC_APB2Periph_USART6, DISABLE); - } - else if (USARTx == UART7) - { - RCC_APB1PeriphResetCmd(RCC_APB1Periph_UART7, ENABLE); - RCC_APB1PeriphResetCmd(RCC_APB1Periph_UART7, DISABLE); - } - else - { - if (USARTx == UART8) - { - RCC_APB1PeriphResetCmd(RCC_APB1Periph_UART8, ENABLE); - RCC_APB1PeriphResetCmd(RCC_APB1Periph_UART8, DISABLE); - } - } -} - -/** - * @brief Initializes the USARTx peripheral according to the specified - * parameters in the USART_InitStruct . - * @param USARTx: where x can be 1, 2, 3, 4, 5, 6, 7 or 8 to select the USART or - * UART peripheral. - * @param USART_InitStruct: pointer to a USART_InitTypeDef structure that contains - * the configuration information for the specified USART peripheral. - * @retval None - */ -void USART_Init(USART_TypeDef* USARTx, USART_InitTypeDef* USART_InitStruct) -{ - uint32_t tmpreg = 0x00, apbclock = 0x00; - uint32_t integerdivider = 0x00; - uint32_t fractionaldivider = 0x00; - RCC_ClocksTypeDef RCC_ClocksStatus; - - /* Check the parameters */ - assert_param(IS_USART_ALL_PERIPH(USARTx)); - assert_param(IS_USART_BAUDRATE(USART_InitStruct->USART_BaudRate)); - assert_param(IS_USART_WORD_LENGTH(USART_InitStruct->USART_WordLength)); - assert_param(IS_USART_STOPBITS(USART_InitStruct->USART_StopBits)); - assert_param(IS_USART_PARITY(USART_InitStruct->USART_Parity)); - assert_param(IS_USART_MODE(USART_InitStruct->USART_Mode)); - assert_param(IS_USART_HARDWARE_FLOW_CONTROL(USART_InitStruct->USART_HardwareFlowControl)); - - /* The hardware flow control is available only for USART1, USART2, USART3 and USART6 */ - if (USART_InitStruct->USART_HardwareFlowControl != USART_HardwareFlowControl_None) - { - assert_param(IS_USART_1236_PERIPH(USARTx)); - } - -/*---------------------------- USART CR2 Configuration -----------------------*/ - tmpreg = USARTx->CR2; - - /* Clear STOP[13:12] bits */ - tmpreg &= (uint32_t)~((uint32_t)USART_CR2_STOP); - - /* Configure the USART Stop Bits, Clock, CPOL, CPHA and LastBit : - Set STOP[13:12] bits according to USART_StopBits value */ - tmpreg |= (uint32_t)USART_InitStruct->USART_StopBits; - - /* Write to USART CR2 */ - USARTx->CR2 = (uint16_t)tmpreg; - -/*---------------------------- USART CR1 Configuration -----------------------*/ - tmpreg = USARTx->CR1; - - /* Clear M, PCE, PS, TE and RE bits */ - tmpreg &= (uint32_t)~((uint32_t)CR1_CLEAR_MASK); - - /* Configure the USART Word Length, Parity and mode: - Set the M bits according to USART_WordLength value - Set PCE and PS bits according to USART_Parity value - Set TE and RE bits according to USART_Mode value */ - tmpreg |= (uint32_t)USART_InitStruct->USART_WordLength | USART_InitStruct->USART_Parity | - USART_InitStruct->USART_Mode; - - /* Write to USART CR1 */ - USARTx->CR1 = (uint16_t)tmpreg; - -/*---------------------------- USART CR3 Configuration -----------------------*/ - tmpreg = USARTx->CR3; - - /* Clear CTSE and RTSE bits */ - tmpreg &= (uint32_t)~((uint32_t)CR3_CLEAR_MASK); - - /* Configure the USART HFC : - Set CTSE and RTSE bits according to USART_HardwareFlowControl value */ - tmpreg |= USART_InitStruct->USART_HardwareFlowControl; - - /* Write to USART CR3 */ - USARTx->CR3 = (uint16_t)tmpreg; - -/*---------------------------- USART BRR Configuration -----------------------*/ - /* Configure the USART Baud Rate */ - RCC_GetClocksFreq(&RCC_ClocksStatus); - - if ((USARTx == USART1) || (USARTx == USART6)) - { - apbclock = RCC_ClocksStatus.PCLK2_Frequency; - } - else - { - apbclock = RCC_ClocksStatus.PCLK1_Frequency; - } - - /* Determine the integer part */ - if ((USARTx->CR1 & USART_CR1_OVER8) != 0) - { - /* Integer part computing in case Oversampling mode is 8 Samples */ - integerdivider = ((25 * apbclock) / (2 * (USART_InitStruct->USART_BaudRate))); - } - else /* if ((USARTx->CR1 & USART_CR1_OVER8) == 0) */ - { - /* Integer part computing in case Oversampling mode is 16 Samples */ - integerdivider = ((25 * apbclock) / (4 * (USART_InitStruct->USART_BaudRate))); - } - tmpreg = (integerdivider / 100) << 4; - - /* Determine the fractional part */ - fractionaldivider = integerdivider - (100 * (tmpreg >> 4)); - - /* Implement the fractional part in the register */ - if ((USARTx->CR1 & USART_CR1_OVER8) != 0) - { - tmpreg |= ((((fractionaldivider * 8) + 50) / 100)) & ((uint8_t)0x07); - } - else /* if ((USARTx->CR1 & USART_CR1_OVER8) == 0) */ - { - tmpreg |= ((((fractionaldivider * 16) + 50) / 100)) & ((uint8_t)0x0F); - } - - /* Write to USART BRR register */ - USARTx->BRR = (uint16_t)tmpreg; -} - -/** - * @brief Fills each USART_InitStruct member with its default value. - * @param USART_InitStruct: pointer to a USART_InitTypeDef structure which will - * be initialized. - * @retval None - */ -void USART_StructInit(USART_InitTypeDef* USART_InitStruct) -{ - /* USART_InitStruct members default value */ - USART_InitStruct->USART_BaudRate = 9600; - USART_InitStruct->USART_WordLength = USART_WordLength_8b; - USART_InitStruct->USART_StopBits = USART_StopBits_1; - USART_InitStruct->USART_Parity = USART_Parity_No ; - USART_InitStruct->USART_Mode = USART_Mode_Rx | USART_Mode_Tx; - USART_InitStruct->USART_HardwareFlowControl = USART_HardwareFlowControl_None; -} - -/** - * @brief Initializes the USARTx peripheral Clock according to the - * specified parameters in the USART_ClockInitStruct . - * @param USARTx: where x can be 1, 2, 3 or 6 to select the USART peripheral. - * @param USART_ClockInitStruct: pointer to a USART_ClockInitTypeDef structure that - * contains the configuration information for the specified USART peripheral. - * @note The Smart Card and Synchronous modes are not available for UART4 and UART5. - * @retval None - */ -void USART_ClockInit(USART_TypeDef* USARTx, USART_ClockInitTypeDef* USART_ClockInitStruct) -{ - uint32_t tmpreg = 0x00; - /* Check the parameters */ - assert_param(IS_USART_1236_PERIPH(USARTx)); - assert_param(IS_USART_CLOCK(USART_ClockInitStruct->USART_Clock)); - assert_param(IS_USART_CPOL(USART_ClockInitStruct->USART_CPOL)); - assert_param(IS_USART_CPHA(USART_ClockInitStruct->USART_CPHA)); - assert_param(IS_USART_LASTBIT(USART_ClockInitStruct->USART_LastBit)); - -/*---------------------------- USART CR2 Configuration -----------------------*/ - tmpreg = USARTx->CR2; - /* Clear CLKEN, CPOL, CPHA and LBCL bits */ - tmpreg &= (uint32_t)~((uint32_t)CR2_CLOCK_CLEAR_MASK); - /* Configure the USART Clock, CPOL, CPHA and LastBit ------------*/ - /* Set CLKEN bit according to USART_Clock value */ - /* Set CPOL bit according to USART_CPOL value */ - /* Set CPHA bit according to USART_CPHA value */ - /* Set LBCL bit according to USART_LastBit value */ - tmpreg |= (uint32_t)USART_ClockInitStruct->USART_Clock | USART_ClockInitStruct->USART_CPOL | - USART_ClockInitStruct->USART_CPHA | USART_ClockInitStruct->USART_LastBit; - /* Write to USART CR2 */ - USARTx->CR2 = (uint16_t)tmpreg; -} - -/** - * @brief Fills each USART_ClockInitStruct member with its default value. - * @param USART_ClockInitStruct: pointer to a USART_ClockInitTypeDef structure - * which will be initialized. - * @retval None - */ -void USART_ClockStructInit(USART_ClockInitTypeDef* USART_ClockInitStruct) -{ - /* USART_ClockInitStruct members default value */ - USART_ClockInitStruct->USART_Clock = USART_Clock_Disable; - USART_ClockInitStruct->USART_CPOL = USART_CPOL_Low; - USART_ClockInitStruct->USART_CPHA = USART_CPHA_1Edge; - USART_ClockInitStruct->USART_LastBit = USART_LastBit_Disable; -} - -/** - * @brief Enables or disables the specified USART peripheral. - * @param USARTx: where x can be 1, 2, 3, 4, 5, 6, 7 or 8 to select the USART or - * UART peripheral. - * @param NewState: new state of the USARTx peripheral. - * This parameter can be: ENABLE or DISABLE. - * @retval None - */ -void USART_Cmd(USART_TypeDef* USARTx, FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_USART_ALL_PERIPH(USARTx)); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - - if (NewState != DISABLE) - { - /* Enable the selected USART by setting the UE bit in the CR1 register */ - USARTx->CR1 |= USART_CR1_UE; - } - else - { - /* Disable the selected USART by clearing the UE bit in the CR1 register */ - USARTx->CR1 &= (uint16_t)~((uint16_t)USART_CR1_UE); - } -} - -/** - * @brief Sets the system clock prescaler. - * @param USARTx: where x can be 1, 2, 3, 4, 5, 6, 7 or 8 to select the USART or - * UART peripheral. - * @param USART_Prescaler: specifies the prescaler clock. - * @note The function is used for IrDA mode with UART4 and UART5. - * @retval None - */ -void USART_SetPrescaler(USART_TypeDef* USARTx, uint8_t USART_Prescaler) -{ - /* Check the parameters */ - assert_param(IS_USART_ALL_PERIPH(USARTx)); - - /* Clear the USART prescaler */ - USARTx->GTPR &= USART_GTPR_GT; - /* Set the USART prescaler */ - USARTx->GTPR |= USART_Prescaler; -} - -/** - * @brief Enables or disables the USART's 8x oversampling mode. - * @note This function has to be called before calling USART_Init() function - * in order to have correct baudrate Divider value. - * @param USARTx: where x can be 1, 2, 3, 4, 5, 6, 7 or 8 to select the USART or - * UART peripheral. - * @param NewState: new state of the USART 8x oversampling mode. - * This parameter can be: ENABLE or DISABLE. - * @retval None - */ -void USART_OverSampling8Cmd(USART_TypeDef* USARTx, FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_USART_ALL_PERIPH(USARTx)); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - - if (NewState != DISABLE) - { - /* Enable the 8x Oversampling mode by setting the OVER8 bit in the CR1 register */ - USARTx->CR1 |= USART_CR1_OVER8; - } - else - { - /* Disable the 8x Oversampling mode by clearing the OVER8 bit in the CR1 register */ - USARTx->CR1 &= (uint16_t)~((uint16_t)USART_CR1_OVER8); - } -} - -/** - * @brief Enables or disables the USART's one bit sampling method. - * @param USARTx: where x can be 1, 2, 3, 4, 5, 6, 7 or 8 to select the USART or - * UART peripheral. - * @param NewState: new state of the USART one bit sampling method. - * This parameter can be: ENABLE or DISABLE. - * @retval None - */ -void USART_OneBitMethodCmd(USART_TypeDef* USARTx, FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_USART_ALL_PERIPH(USARTx)); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - - if (NewState != DISABLE) - { - /* Enable the one bit method by setting the ONEBITE bit in the CR3 register */ - USARTx->CR3 |= USART_CR3_ONEBIT; - } - else - { - /* Disable the one bit method by clearing the ONEBITE bit in the CR3 register */ - USARTx->CR3 &= (uint16_t)~((uint16_t)USART_CR3_ONEBIT); - } -} - -/** - * @} - */ - -/** @defgroup USART_Group2 Data transfers functions - * @brief Data transfers functions - * -@verbatim - =============================================================================== - ##### Data transfers functions ##### - =============================================================================== - [..] - This subsection provides a set of functions allowing to manage the USART data - transfers. - [..] - During an USART reception, data shifts in least significant bit first through - the RX pin. In this mode, the USART_DR register consists of a buffer (RDR) - between the internal bus and the received shift register. - [..] - When a transmission is taking place, a write instruction to the USART_DR register - stores the data in the TDR register and which is copied in the shift register - at the end of the current transmission. - [..] - The read access of the USART_DR register can be done using the USART_ReceiveData() - function and returns the RDR buffered value. Whereas a write access to the USART_DR - can be done using USART_SendData() function and stores the written data into - TDR buffer. - -@endverbatim - * @{ - */ - -/** - * @brief Transmits single data through the USARTx peripheral. - * @param USARTx: where x can be 1, 2, 3, 4, 5, 6, 7 or 8 to select the USART or - * UART peripheral. - * @param Data: the data to transmit. - * @retval None - */ -void USART_SendData(USART_TypeDef* USARTx, uint16_t Data) -{ - /* Check the parameters */ - assert_param(IS_USART_ALL_PERIPH(USARTx)); - assert_param(IS_USART_DATA(Data)); - - /* Transmit Data */ - USARTx->DR = (Data & (uint16_t)0x01FF); -} - -/** - * @brief Returns the most recent received data by the USARTx peripheral. - * @param USARTx: where x can be 1, 2, 3, 4, 5, 6, 7 or 8 to select the USART or - * UART peripheral. - * @retval The received data. - */ -uint16_t USART_ReceiveData(USART_TypeDef* USARTx) -{ - /* Check the parameters */ - assert_param(IS_USART_ALL_PERIPH(USARTx)); - - /* Receive Data */ - return (uint16_t)(USARTx->DR & (uint16_t)0x01FF); -} - -/** - * @} - */ - -/** @defgroup USART_Group3 MultiProcessor Communication functions - * @brief Multi-Processor Communication functions - * -@verbatim - =============================================================================== - ##### Multi-Processor Communication functions ##### - =============================================================================== - [..] - This subsection provides a set of functions allowing to manage the USART - multiprocessor communication. - [..] - For instance one of the USARTs can be the master, its TX output is connected - to the RX input of the other USART. The others are slaves, their respective - TX outputs are logically ANDed together and connected to the RX input of the - master. - [..] - USART multiprocessor communication is possible through the following procedure: - (#) Program the Baud rate, Word length = 9 bits, Stop bits, Parity, Mode - transmitter or Mode receiver and hardware flow control values using - the USART_Init() function. - (#) Configures the USART address using the USART_SetAddress() function. - (#) Configures the wake up method (USART_WakeUp_IdleLine or USART_WakeUp_AddressMark) - using USART_WakeUpConfig() function only for the slaves. - (#) Enable the USART using the USART_Cmd() function. - (#) Enter the USART slaves in mute mode using USART_ReceiverWakeUpCmd() function. - [..] - The USART Slave exit from mute mode when receive the wake up condition. - -@endverbatim - * @{ - */ - -/** - * @brief Sets the address of the USART node. - * @param USARTx: where x can be 1, 2, 3, 4, 5, 6, 7 or 8 to select the USART or - * UART peripheral. - * @param USART_Address: Indicates the address of the USART node. - * @retval None - */ -void USART_SetAddress(USART_TypeDef* USARTx, uint8_t USART_Address) -{ - /* Check the parameters */ - assert_param(IS_USART_ALL_PERIPH(USARTx)); - assert_param(IS_USART_ADDRESS(USART_Address)); - - /* Clear the USART address */ - USARTx->CR2 &= (uint16_t)~((uint16_t)USART_CR2_ADD); - /* Set the USART address node */ - USARTx->CR2 |= USART_Address; -} - -/** - * @brief Determines if the USART is in mute mode or not. - * @param USARTx: where x can be 1, 2, 3, 4, 5, 6, 7 or 8 to select the USART or - * UART peripheral. - * @param NewState: new state of the USART mute mode. - * This parameter can be: ENABLE or DISABLE. - * @retval None - */ -void USART_ReceiverWakeUpCmd(USART_TypeDef* USARTx, FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_USART_ALL_PERIPH(USARTx)); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - - if (NewState != DISABLE) - { - /* Enable the USART mute mode by setting the RWU bit in the CR1 register */ - USARTx->CR1 |= USART_CR1_RWU; - } - else - { - /* Disable the USART mute mode by clearing the RWU bit in the CR1 register */ - USARTx->CR1 &= (uint16_t)~((uint16_t)USART_CR1_RWU); - } -} -/** - * @brief Selects the USART WakeUp method. - * @param USARTx: where x can be 1, 2, 3, 4, 5, 6, 7 or 8 to select the USART or - * UART peripheral. - * @param USART_WakeUp: specifies the USART wakeup method. - * This parameter can be one of the following values: - * @arg USART_WakeUp_IdleLine: WakeUp by an idle line detection - * @arg USART_WakeUp_AddressMark: WakeUp by an address mark - * @retval None - */ -void USART_WakeUpConfig(USART_TypeDef* USARTx, uint16_t USART_WakeUp) -{ - /* Check the parameters */ - assert_param(IS_USART_ALL_PERIPH(USARTx)); - assert_param(IS_USART_WAKEUP(USART_WakeUp)); - - USARTx->CR1 &= (uint16_t)~((uint16_t)USART_CR1_WAKE); - USARTx->CR1 |= USART_WakeUp; -} - -/** - * @} - */ - -/** @defgroup USART_Group4 LIN mode functions - * @brief LIN mode functions - * -@verbatim - =============================================================================== - ##### LIN mode functions ##### - =============================================================================== - [..] - This subsection provides a set of functions allowing to manage the USART LIN - Mode communication. - [..] - In LIN mode, 8-bit data format with 1 stop bit is required in accordance with - the LIN standard. - [..] - Only this LIN Feature is supported by the USART IP: - (+) LIN Master Synchronous Break send capability and LIN slave break detection - capability : 13-bit break generation and 10/11 bit break detection - - [..] - USART LIN Master transmitter communication is possible through the following - procedure: - (#) Program the Baud rate, Word length = 8bits, Stop bits = 1bit, Parity, - Mode transmitter or Mode receiver and hardware flow control values using - the USART_Init() function. - (#) Enable the USART using the USART_Cmd() function. - (#) Enable the LIN mode using the USART_LINCmd() function. - (#) Send the break character using USART_SendBreak() function. - [..] - USART LIN Master receiver communication is possible through the following procedure: - (#) Program the Baud rate, Word length = 8bits, Stop bits = 1bit, Parity, - Mode transmitter or Mode receiver and hardware flow control values using - the USART_Init() function. - (#) Enable the USART using the USART_Cmd() function. - (#) Configures the break detection length using the USART_LINBreakDetectLengthConfig() - function. - (#) Enable the LIN mode using the USART_LINCmd() function. - - -@- In LIN mode, the following bits must be kept cleared: - (+@) CLKEN in the USART_CR2 register, - (+@) STOP[1:0], SCEN, HDSEL and IREN in the USART_CR3 register. - -@endverbatim - * @{ - */ - -/** - * @brief Sets the USART LIN Break detection length. - * @param USARTx: where x can be 1, 2, 3, 4, 5, 6, 7 or 8 to select the USART or - * UART peripheral. - * @param USART_LINBreakDetectLength: specifies the LIN break detection length. - * This parameter can be one of the following values: - * @arg USART_LINBreakDetectLength_10b: 10-bit break detection - * @arg USART_LINBreakDetectLength_11b: 11-bit break detection - * @retval None - */ -void USART_LINBreakDetectLengthConfig(USART_TypeDef* USARTx, uint16_t USART_LINBreakDetectLength) -{ - /* Check the parameters */ - assert_param(IS_USART_ALL_PERIPH(USARTx)); - assert_param(IS_USART_LIN_BREAK_DETECT_LENGTH(USART_LINBreakDetectLength)); - - USARTx->CR2 &= (uint16_t)~((uint16_t)USART_CR2_LBDL); - USARTx->CR2 |= USART_LINBreakDetectLength; -} - -/** - * @brief Enables or disables the USART's LIN mode. - * @param USARTx: where x can be 1, 2, 3, 4, 5, 6, 7 or 8 to select the USART or - * UART peripheral. - * @param NewState: new state of the USART LIN mode. - * This parameter can be: ENABLE or DISABLE. - * @retval None - */ -void USART_LINCmd(USART_TypeDef* USARTx, FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_USART_ALL_PERIPH(USARTx)); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - - if (NewState != DISABLE) - { - /* Enable the LIN mode by setting the LINEN bit in the CR2 register */ - USARTx->CR2 |= USART_CR2_LINEN; - } - else - { - /* Disable the LIN mode by clearing the LINEN bit in the CR2 register */ - USARTx->CR2 &= (uint16_t)~((uint16_t)USART_CR2_LINEN); - } -} - -/** - * @brief Transmits break characters. - * @param USARTx: where x can be 1, 2, 3, 4, 5, 6, 7 or 8 to select the USART or - * UART peripheral. - * @retval None - */ -void USART_SendBreak(USART_TypeDef* USARTx) -{ - /* Check the parameters */ - assert_param(IS_USART_ALL_PERIPH(USARTx)); - - /* Send break characters */ - USARTx->CR1 |= USART_CR1_SBK; -} - -/** - * @} - */ - -/** @defgroup USART_Group5 Halfduplex mode function - * @brief Half-duplex mode function - * -@verbatim - =============================================================================== - ##### Half-duplex mode function ##### - =============================================================================== - [..] - This subsection provides a set of functions allowing to manage the USART - Half-duplex communication. - [..] - The USART can be configured to follow a single-wire half-duplex protocol where - the TX and RX lines are internally connected. - [..] - USART Half duplex communication is possible through the following procedure: - (#) Program the Baud rate, Word length, Stop bits, Parity, Mode transmitter - or Mode receiver and hardware flow control values using the USART_Init() - function. - (#) Configures the USART address using the USART_SetAddress() function. - (#) Enable the USART using the USART_Cmd() function. - (#) Enable the half duplex mode using USART_HalfDuplexCmd() function. - - - -@- The RX pin is no longer used - -@- In Half-duplex mode the following bits must be kept cleared: - (+@) LINEN and CLKEN bits in the USART_CR2 register. - (+@) SCEN and IREN bits in the USART_CR3 register. - -@endverbatim - * @{ - */ - -/** - * @brief Enables or disables the USART's Half Duplex communication. - * @param USARTx: where x can be 1, 2, 3, 4, 5, 6, 7 or 8 to select the USART or - * UART peripheral. - * @param NewState: new state of the USART Communication. - * This parameter can be: ENABLE or DISABLE. - * @retval None - */ -void USART_HalfDuplexCmd(USART_TypeDef* USARTx, FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_USART_ALL_PERIPH(USARTx)); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - - if (NewState != DISABLE) - { - /* Enable the Half-Duplex mode by setting the HDSEL bit in the CR3 register */ - USARTx->CR3 |= USART_CR3_HDSEL; - } - else - { - /* Disable the Half-Duplex mode by clearing the HDSEL bit in the CR3 register */ - USARTx->CR3 &= (uint16_t)~((uint16_t)USART_CR3_HDSEL); - } -} - -/** - * @} - */ - - -/** @defgroup USART_Group6 Smartcard mode functions - * @brief Smartcard mode functions - * -@verbatim - =============================================================================== - ##### Smartcard mode functions ##### - =============================================================================== - [..] - This subsection provides a set of functions allowing to manage the USART - Smartcard communication. - [..] - The Smartcard interface is designed to support asynchronous protocol Smartcards as - defined in the ISO 7816-3 standard. - [..] - The USART can provide a clock to the smartcard through the SCLK output. - In smartcard mode, SCLK is not associated to the communication but is simply derived - from the internal peripheral input clock through a 5-bit prescaler. - [..] - Smartcard communication is possible through the following procedure: - (#) Configures the Smartcard Prescaler using the USART_SetPrescaler() function. - (#) Configures the Smartcard Guard Time using the USART_SetGuardTime() function. - (#) Program the USART clock using the USART_ClockInit() function as following: - (++) USART Clock enabled - (++) USART CPOL Low - (++) USART CPHA on first edge - (++) USART Last Bit Clock Enabled - (#) Program the Smartcard interface using the USART_Init() function as following: - (++) Word Length = 9 Bits - (++) 1.5 Stop Bit - (++) Even parity - (++) BaudRate = 12096 baud - (++) Hardware flow control disabled (RTS and CTS signals) - (++) Tx and Rx enabled - (#) POptionally you can enable the parity error interrupt using the USART_ITConfig() - function - (#) PEnable the USART using the USART_Cmd() function. - (#) PEnable the Smartcard NACK using the USART_SmartCardNACKCmd() function. - (#) PEnable the Smartcard interface using the USART_SmartCardCmd() function. - - Please refer to the ISO 7816-3 specification for more details. - - -@- It is also possible to choose 0.5 stop bit for receiving but it is recommended - to use 1.5 stop bits for both transmitting and receiving to avoid switching - between the two configurations. - -@- In smartcard mode, the following bits must be kept cleared: - (+@) LINEN bit in the USART_CR2 register. - (+@) HDSEL and IREN bits in the USART_CR3 register. - -@- Smartcard mode is available on USART peripherals only (not available on UART4 - and UART5 peripherals). - -@endverbatim - * @{ - */ - -/** - * @brief Sets the specified USART guard time. - * @param USARTx: where x can be 1, 2, 3 or 6 to select the USART or - * UART peripheral. - * @param USART_GuardTime: specifies the guard time. - * @retval None - */ -void USART_SetGuardTime(USART_TypeDef* USARTx, uint8_t USART_GuardTime) -{ - /* Check the parameters */ - assert_param(IS_USART_1236_PERIPH(USARTx)); - - /* Clear the USART Guard time */ - USARTx->GTPR &= USART_GTPR_PSC; - /* Set the USART guard time */ - USARTx->GTPR |= (uint16_t)((uint16_t)USART_GuardTime << 0x08); -} - -/** - * @brief Enables or disables the USART's Smart Card mode. - * @param USARTx: where x can be 1, 2, 3 or 6 to select the USART or - * UART peripheral. - * @param NewState: new state of the Smart Card mode. - * This parameter can be: ENABLE or DISABLE. - * @retval None - */ -void USART_SmartCardCmd(USART_TypeDef* USARTx, FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_USART_1236_PERIPH(USARTx)); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - if (NewState != DISABLE) - { - /* Enable the SC mode by setting the SCEN bit in the CR3 register */ - USARTx->CR3 |= USART_CR3_SCEN; - } - else - { - /* Disable the SC mode by clearing the SCEN bit in the CR3 register */ - USARTx->CR3 &= (uint16_t)~((uint16_t)USART_CR3_SCEN); - } -} - -/** - * @brief Enables or disables NACK transmission. - * @param USARTx: where x can be 1, 2, 3 or 6 to select the USART or - * UART peripheral. - * @param NewState: new state of the NACK transmission. - * This parameter can be: ENABLE or DISABLE. - * @retval None - */ -void USART_SmartCardNACKCmd(USART_TypeDef* USARTx, FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_USART_1236_PERIPH(USARTx)); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - if (NewState != DISABLE) - { - /* Enable the NACK transmission by setting the NACK bit in the CR3 register */ - USARTx->CR3 |= USART_CR3_NACK; - } - else - { - /* Disable the NACK transmission by clearing the NACK bit in the CR3 register */ - USARTx->CR3 &= (uint16_t)~((uint16_t)USART_CR3_NACK); - } -} - -/** - * @} - */ - -/** @defgroup USART_Group7 IrDA mode functions - * @brief IrDA mode functions - * -@verbatim - =============================================================================== - ##### IrDA mode functions ##### - =============================================================================== - [..] - This subsection provides a set of functions allowing to manage the USART - IrDA communication. - [..] - IrDA is a half duplex communication protocol. If the Transmitter is busy, any data - on the IrDA receive line will be ignored by the IrDA decoder and if the Receiver - is busy, data on the TX from the USART to IrDA will not be encoded by IrDA. - While receiving data, transmission should be avoided as the data to be transmitted - could be corrupted. - [..] - IrDA communication is possible through the following procedure: - (#) Program the Baud rate, Word length = 8 bits, Stop bits, Parity, Transmitter/Receiver - modes and hardware flow control values using the USART_Init() function. - (#) Enable the USART using the USART_Cmd() function. - (#) Configures the IrDA pulse width by configuring the prescaler using - the USART_SetPrescaler() function. - (#) Configures the IrDA USART_IrDAMode_LowPower or USART_IrDAMode_Normal mode - using the USART_IrDAConfig() function. - (#) Enable the IrDA using the USART_IrDACmd() function. - - -@- A pulse of width less than two and greater than one PSC period(s) may or may - not be rejected. - -@- The receiver set up time should be managed by software. The IrDA physical layer - specification specifies a minimum of 10 ms delay between transmission and - reception (IrDA is a half duplex protocol). - -@- In IrDA mode, the following bits must be kept cleared: - (+@) LINEN, STOP and CLKEN bits in the USART_CR2 register. - (+@) SCEN and HDSEL bits in the USART_CR3 register. - -@endverbatim - * @{ - */ - -/** - * @brief Configures the USART's IrDA interface. - * @param USARTx: where x can be 1, 2, 3, 4, 5, 6, 7 or 8 to select the USART or - * UART peripheral. - * @param USART_IrDAMode: specifies the IrDA mode. - * This parameter can be one of the following values: - * @arg USART_IrDAMode_LowPower - * @arg USART_IrDAMode_Normal - * @retval None - */ -void USART_IrDAConfig(USART_TypeDef* USARTx, uint16_t USART_IrDAMode) -{ - /* Check the parameters */ - assert_param(IS_USART_ALL_PERIPH(USARTx)); - assert_param(IS_USART_IRDA_MODE(USART_IrDAMode)); - - USARTx->CR3 &= (uint16_t)~((uint16_t)USART_CR3_IRLP); - USARTx->CR3 |= USART_IrDAMode; -} - -/** - * @brief Enables or disables the USART's IrDA interface. - * @param USARTx: where x can be 1, 2, 3, 4, 5, 6, 7 or 8 to select the USART or - * UART peripheral. - * @param NewState: new state of the IrDA mode. - * This parameter can be: ENABLE or DISABLE. - * @retval None - */ -void USART_IrDACmd(USART_TypeDef* USARTx, FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_USART_ALL_PERIPH(USARTx)); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - - if (NewState != DISABLE) - { - /* Enable the IrDA mode by setting the IREN bit in the CR3 register */ - USARTx->CR3 |= USART_CR3_IREN; - } - else - { - /* Disable the IrDA mode by clearing the IREN bit in the CR3 register */ - USARTx->CR3 &= (uint16_t)~((uint16_t)USART_CR3_IREN); - } -} - -/** - * @} - */ - -/** @defgroup USART_Group8 DMA transfers management functions - * @brief DMA transfers management functions - * -@verbatim - =============================================================================== - ##### DMA transfers management functions ##### - =============================================================================== - -@endverbatim - * @{ - */ - -/** - * @brief Enables or disables the USART's DMA interface. - * @param USARTx: where x can be 1, 2, 3, 4, 5, 6, 7 or 8 to select the USART or - * UART peripheral. - * @param USART_DMAReq: specifies the DMA request. - * This parameter can be any combination of the following values: - * @arg USART_DMAReq_Tx: USART DMA transmit request - * @arg USART_DMAReq_Rx: USART DMA receive request - * @param NewState: new state of the DMA Request sources. - * This parameter can be: ENABLE or DISABLE. - * @retval None - */ -void USART_DMACmd(USART_TypeDef* USARTx, uint16_t USART_DMAReq, FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_USART_ALL_PERIPH(USARTx)); - assert_param(IS_USART_DMAREQ(USART_DMAReq)); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - - if (NewState != DISABLE) - { - /* Enable the DMA transfer for selected requests by setting the DMAT and/or - DMAR bits in the USART CR3 register */ - USARTx->CR3 |= USART_DMAReq; - } - else - { - /* Disable the DMA transfer for selected requests by clearing the DMAT and/or - DMAR bits in the USART CR3 register */ - USARTx->CR3 &= (uint16_t)~USART_DMAReq; - } -} - -/** - * @} - */ - -/** @defgroup USART_Group9 Interrupts and flags management functions - * @brief Interrupts and flags management functions - * -@verbatim - =============================================================================== - ##### Interrupts and flags management functions ##### - =============================================================================== - [..] - This subsection provides a set of functions allowing to configure the USART - Interrupts sources, DMA channels requests and check or clear the flags or - pending bits status. - The user should identify which mode will be used in his application to manage - the communication: Polling mode, Interrupt mode or DMA mode. - - *** Polling Mode *** - ==================== - [..] - In Polling Mode, the SPI communication can be managed by 10 flags: - (#) USART_FLAG_TXE : to indicate the status of the transmit buffer register - (#) USART_FLAG_RXNE : to indicate the status of the receive buffer register - (#) USART_FLAG_TC : to indicate the status of the transmit operation - (#) USART_FLAG_IDLE : to indicate the status of the Idle Line - (#) USART_FLAG_CTS : to indicate the status of the nCTS input - (#) USART_FLAG_LBD : to indicate the status of the LIN break detection - (#) USART_FLAG_NE : to indicate if a noise error occur - (#) USART_FLAG_FE : to indicate if a frame error occur - (#) USART_FLAG_PE : to indicate if a parity error occur - (#) USART_FLAG_ORE : to indicate if an Overrun error occur - [..] - In this Mode it is advised to use the following functions: - (+) FlagStatus USART_GetFlagStatus(USART_TypeDef* USARTx, uint16_t USART_FLAG); - (+) void USART_ClearFlag(USART_TypeDef* USARTx, uint16_t USART_FLAG); - - *** Interrupt Mode *** - ====================== - [..] - In Interrupt Mode, the USART communication can be managed by 8 interrupt sources - and 10 pending bits: - - (#) Pending Bits: - - (##) USART_IT_TXE : to indicate the status of the transmit buffer register - (##) USART_IT_RXNE : to indicate the status of the receive buffer register - (##) USART_IT_TC : to indicate the status of the transmit operation - (##) USART_IT_IDLE : to indicate the status of the Idle Line - (##) USART_IT_CTS : to indicate the status of the nCTS input - (##) USART_IT_LBD : to indicate the status of the LIN break detection - (##) USART_IT_NE : to indicate if a noise error occur - (##) USART_IT_FE : to indicate if a frame error occur - (##) USART_IT_PE : to indicate if a parity error occur - (##) USART_IT_ORE : to indicate if an Overrun error occur - - (#) Interrupt Source: - - (##) USART_IT_TXE : specifies the interrupt source for the Tx buffer empty - interrupt. - (##) USART_IT_RXNE : specifies the interrupt source for the Rx buffer not - empty interrupt. - (##) USART_IT_TC : specifies the interrupt source for the Transmit complete - interrupt. - (##) USART_IT_IDLE : specifies the interrupt source for the Idle Line interrupt. - (##) USART_IT_CTS : specifies the interrupt source for the CTS interrupt. - (##) USART_IT_LBD : specifies the interrupt source for the LIN break detection - interrupt. - (##) USART_IT_PE : specifies the interrupt source for the parity error interrupt. - (##) USART_IT_ERR : specifies the interrupt source for the errors interrupt. - - -@@- Some parameters are coded in order to use them as interrupt source - or as pending bits. - [..] - In this Mode it is advised to use the following functions: - (+) void USART_ITConfig(USART_TypeDef* USARTx, uint16_t USART_IT, FunctionalState NewState); - (+) ITStatus USART_GetITStatus(USART_TypeDef* USARTx, uint16_t USART_IT); - (+) void USART_ClearITPendingBit(USART_TypeDef* USARTx, uint16_t USART_IT); - - *** DMA Mode *** - ================ - [..] - In DMA Mode, the USART communication can be managed by 2 DMA Channel requests: - (#) USART_DMAReq_Tx: specifies the Tx buffer DMA transfer request - (#) USART_DMAReq_Rx: specifies the Rx buffer DMA transfer request - [..] - In this Mode it is advised to use the following function: - (+) void USART_DMACmd(USART_TypeDef* USARTx, uint16_t USART_DMAReq, FunctionalState NewState); - -@endverbatim - * @{ - */ - -/** - * @brief Enables or disables the specified USART interrupts. - * @param USARTx: where x can be 1, 2, 3, 4, 5, 6, 7 or 8 to select the USART or - * UART peripheral. - * @param USART_IT: specifies the USART interrupt sources to be enabled or disabled. - * This parameter can be one of the following values: - * @arg USART_IT_CTS: CTS change interrupt - * @arg USART_IT_LBD: LIN Break detection interrupt - * @arg USART_IT_TXE: Transmit Data Register empty interrupt - * @arg USART_IT_TC: Transmission complete interrupt - * @arg USART_IT_RXNE: Receive Data register not empty interrupt - * @arg USART_IT_IDLE: Idle line detection interrupt - * @arg USART_IT_PE: Parity Error interrupt - * @arg USART_IT_ERR: Error interrupt(Frame error, noise error, overrun error) - * @param NewState: new state of the specified USARTx interrupts. - * This parameter can be: ENABLE or DISABLE. - * @retval None - */ -void USART_ITConfig(USART_TypeDef* USARTx, uint16_t USART_IT, FunctionalState NewState) -{ - uint32_t usartreg = 0x00, itpos = 0x00, itmask = 0x00; - uint32_t usartxbase = 0x00; - /* Check the parameters */ - assert_param(IS_USART_ALL_PERIPH(USARTx)); - assert_param(IS_USART_CONFIG_IT(USART_IT)); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - - /* The CTS interrupt is not available for UART4 and UART5 */ - if (USART_IT == USART_IT_CTS) - { - assert_param(IS_USART_1236_PERIPH(USARTx)); - } - - usartxbase = (uint32_t)USARTx; - - /* Get the USART register index */ - usartreg = (((uint8_t)USART_IT) >> 0x05); - - /* Get the interrupt position */ - itpos = USART_IT & IT_MASK; - itmask = (((uint32_t)0x01) << itpos); - - if (usartreg == 0x01) /* The IT is in CR1 register */ - { - usartxbase += 0x0C; - } - else if (usartreg == 0x02) /* The IT is in CR2 register */ - { - usartxbase += 0x10; - } - else /* The IT is in CR3 register */ - { - usartxbase += 0x14; - } - if (NewState != DISABLE) - { - *(__IO uint32_t*)usartxbase |= itmask; - } - else - { - *(__IO uint32_t*)usartxbase &= ~itmask; - } -} - -/** - * @brief Checks whether the specified USART flag is set or not. - * @param USARTx: where x can be 1, 2, 3, 4, 5, 6, 7 or 8 to select the USART or - * UART peripheral. - * @param USART_FLAG: specifies the flag to check. - * This parameter can be one of the following values: - * @arg USART_FLAG_CTS: CTS Change flag (not available for UART4 and UART5) - * @arg USART_FLAG_LBD: LIN Break detection flag - * @arg USART_FLAG_TXE: Transmit data register empty flag - * @arg USART_FLAG_TC: Transmission Complete flag - * @arg USART_FLAG_RXNE: Receive data register not empty flag - * @arg USART_FLAG_IDLE: Idle Line detection flag - * @arg USART_FLAG_ORE: OverRun Error flag - * @arg USART_FLAG_NE: Noise Error flag - * @arg USART_FLAG_FE: Framing Error flag - * @arg USART_FLAG_PE: Parity Error flag - * @retval The new state of USART_FLAG (SET or RESET). - */ -FlagStatus USART_GetFlagStatus(USART_TypeDef* USARTx, uint16_t USART_FLAG) -{ - FlagStatus bitstatus = RESET; - /* Check the parameters */ - assert_param(IS_USART_ALL_PERIPH(USARTx)); - assert_param(IS_USART_FLAG(USART_FLAG)); - - /* The CTS flag is not available for UART4 and UART5 */ - if (USART_FLAG == USART_FLAG_CTS) - { - assert_param(IS_USART_1236_PERIPH(USARTx)); - } - - if ((USARTx->SR & USART_FLAG) != (uint16_t)RESET) - { - bitstatus = SET; - } - else - { - bitstatus = RESET; - } - return bitstatus; -} - -/** - * @brief Clears the USARTx's pending flags. - * @param USARTx: where x can be 1, 2, 3, 4, 5, 6, 7 or 8 to select the USART or - * UART peripheral. - * @param USART_FLAG: specifies the flag to clear. - * This parameter can be any combination of the following values: - * @arg USART_FLAG_CTS: CTS Change flag (not available for UART4 and UART5). - * @arg USART_FLAG_LBD: LIN Break detection flag. - * @arg USART_FLAG_TC: Transmission Complete flag. - * @arg USART_FLAG_RXNE: Receive data register not empty flag. - * - * @note PE (Parity error), FE (Framing error), NE (Noise error), ORE (OverRun - * error) and IDLE (Idle line detected) flags are cleared by software - * sequence: a read operation to USART_SR register (USART_GetFlagStatus()) - * followed by a read operation to USART_DR register (USART_ReceiveData()). - * @note RXNE flag can be also cleared by a read to the USART_DR register - * (USART_ReceiveData()). - * @note TC flag can be also cleared by software sequence: a read operation to - * USART_SR register (USART_GetFlagStatus()) followed by a write operation - * to USART_DR register (USART_SendData()). - * @note TXE flag is cleared only by a write to the USART_DR register - * (USART_SendData()). - * - * @retval None - */ -void USART_ClearFlag(USART_TypeDef* USARTx, uint16_t USART_FLAG) -{ - /* Check the parameters */ - assert_param(IS_USART_ALL_PERIPH(USARTx)); - assert_param(IS_USART_CLEAR_FLAG(USART_FLAG)); - - /* The CTS flag is not available for UART4 and UART5 */ - if ((USART_FLAG & USART_FLAG_CTS) == USART_FLAG_CTS) - { - assert_param(IS_USART_1236_PERIPH(USARTx)); - } - - USARTx->SR = (uint16_t)~USART_FLAG; -} - -/** - * @brief Checks whether the specified USART interrupt has occurred or not. - * @param USARTx: where x can be 1, 2, 3, 4, 5, 6, 7 or 8 to select the USART or - * UART peripheral. - * @param USART_IT: specifies the USART interrupt source to check. - * This parameter can be one of the following values: - * @arg USART_IT_CTS: CTS change interrupt (not available for UART4 and UART5) - * @arg USART_IT_LBD: LIN Break detection interrupt - * @arg USART_IT_TXE: Transmit Data Register empty interrupt - * @arg USART_IT_TC: Transmission complete interrupt - * @arg USART_IT_RXNE: Receive Data register not empty interrupt - * @arg USART_IT_IDLE: Idle line detection interrupt - * @arg USART_IT_ORE_RX : OverRun Error interrupt if the RXNEIE bit is set - * @arg USART_IT_ORE_ER : OverRun Error interrupt if the EIE bit is set - * @arg USART_IT_NE: Noise Error interrupt - * @arg USART_IT_FE: Framing Error interrupt - * @arg USART_IT_PE: Parity Error interrupt - * @retval The new state of USART_IT (SET or RESET). - */ -ITStatus USART_GetITStatus(USART_TypeDef* USARTx, uint16_t USART_IT) -{ - uint32_t bitpos = 0x00, itmask = 0x00, usartreg = 0x00; - ITStatus bitstatus = RESET; - /* Check the parameters */ - assert_param(IS_USART_ALL_PERIPH(USARTx)); - assert_param(IS_USART_GET_IT(USART_IT)); - - /* The CTS interrupt is not available for UART4 and UART5 */ - if (USART_IT == USART_IT_CTS) - { - assert_param(IS_USART_1236_PERIPH(USARTx)); - } - - /* Get the USART register index */ - usartreg = (((uint8_t)USART_IT) >> 0x05); - /* Get the interrupt position */ - itmask = USART_IT & IT_MASK; - itmask = (uint32_t)0x01 << itmask; - - if (usartreg == 0x01) /* The IT is in CR1 register */ - { - itmask &= USARTx->CR1; - } - else if (usartreg == 0x02) /* The IT is in CR2 register */ - { - itmask &= USARTx->CR2; - } - else /* The IT is in CR3 register */ - { - itmask &= USARTx->CR3; - } - - bitpos = USART_IT >> 0x08; - bitpos = (uint32_t)0x01 << bitpos; - bitpos &= USARTx->SR; - if ((itmask != (uint16_t)RESET)&&(bitpos != (uint16_t)RESET)) - { - bitstatus = SET; - } - else - { - bitstatus = RESET; - } - - return bitstatus; -} - -/** - * @brief Clears the USARTx's interrupt pending bits. - * @param USARTx: where x can be 1, 2, 3, 4, 5, 6, 7 or 8 to select the USART or - * UART peripheral. - * @param USART_IT: specifies the interrupt pending bit to clear. - * This parameter can be one of the following values: - * @arg USART_IT_CTS: CTS change interrupt (not available for UART4 and UART5) - * @arg USART_IT_LBD: LIN Break detection interrupt - * @arg USART_IT_TC: Transmission complete interrupt. - * @arg USART_IT_RXNE: Receive Data register not empty interrupt. - * - * @note PE (Parity error), FE (Framing error), NE (Noise error), ORE (OverRun - * error) and IDLE (Idle line detected) pending bits are cleared by - * software sequence: a read operation to USART_SR register - * (USART_GetITStatus()) followed by a read operation to USART_DR register - * (USART_ReceiveData()). - * @note RXNE pending bit can be also cleared by a read to the USART_DR register - * (USART_ReceiveData()). - * @note TC pending bit can be also cleared by software sequence: a read - * operation to USART_SR register (USART_GetITStatus()) followed by a write - * operation to USART_DR register (USART_SendData()). - * @note TXE pending bit is cleared only by a write to the USART_DR register - * (USART_SendData()). - * - * @retval None - */ -void USART_ClearITPendingBit(USART_TypeDef* USARTx, uint16_t USART_IT) -{ - uint16_t bitpos = 0x00, itmask = 0x00; - /* Check the parameters */ - assert_param(IS_USART_ALL_PERIPH(USARTx)); - assert_param(IS_USART_CLEAR_IT(USART_IT)); - - /* The CTS interrupt is not available for UART4 and UART5 */ - if (USART_IT == USART_IT_CTS) - { - assert_param(IS_USART_1236_PERIPH(USARTx)); - } - - bitpos = USART_IT >> 0x08; - itmask = ((uint16_t)0x01 << (uint16_t)bitpos); - USARTx->SR = (uint16_t)~itmask; -} - -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/stm/lib/stm32f4xx_usart.h b/stm/lib/stm32f4xx_usart.h deleted file mode 100644 index dc011da7b..000000000 --- a/stm/lib/stm32f4xx_usart.h +++ /dev/null @@ -1,431 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f4xx_usart.h - * @author MCD Application Team - * @version V1.3.0 - * @date 08-November-2013 - * @brief This file contains all the functions prototypes for the USART - * firmware library. - ****************************************************************************** - * @attention - * - *

© COPYRIGHT 2013 STMicroelectronics

- * - * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License"); - * You may not use this file except in compliance with the License. - * You may obtain a copy of the License at: - * - * http://www.st.com/software_license_agreement_liberty_v2 - * - * Unless required by applicable law or agreed to in writing, software - * distributed under the License is distributed on an "AS IS" BASIS, - * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - * See the License for the specific language governing permissions and - * limitations under the License. - * - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F4xx_USART_H -#define __STM32F4xx_USART_H - -#ifdef __cplusplus - extern "C" { -#endif - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx.h" - -/** @addtogroup STM32F4xx_StdPeriph_Driver - * @{ - */ - -/** @addtogroup USART - * @{ - */ - -/* Exported types ------------------------------------------------------------*/ - -/** - * @brief USART Init Structure definition - */ - -typedef struct -{ - uint32_t USART_BaudRate; /*!< This member configures the USART communication baud rate. - The baud rate is computed using the following formula: - - IntegerDivider = ((PCLKx) / (8 * (OVR8+1) * (USART_InitStruct->USART_BaudRate))) - - FractionalDivider = ((IntegerDivider - ((u32) IntegerDivider)) * 8 * (OVR8+1)) + 0.5 - Where OVR8 is the "oversampling by 8 mode" configuration bit in the CR1 register. */ - - uint16_t USART_WordLength; /*!< Specifies the number of data bits transmitted or received in a frame. - This parameter can be a value of @ref USART_Word_Length */ - - uint16_t USART_StopBits; /*!< Specifies the number of stop bits transmitted. - This parameter can be a value of @ref USART_Stop_Bits */ - - uint16_t USART_Parity; /*!< Specifies the parity mode. - This parameter can be a value of @ref USART_Parity - @note When parity is enabled, the computed parity is inserted - at the MSB position of the transmitted data (9th bit when - the word length is set to 9 data bits; 8th bit when the - word length is set to 8 data bits). */ - - uint16_t USART_Mode; /*!< Specifies wether the Receive or Transmit mode is enabled or disabled. - This parameter can be a value of @ref USART_Mode */ - - uint16_t USART_HardwareFlowControl; /*!< Specifies wether the hardware flow control mode is enabled - or disabled. - This parameter can be a value of @ref USART_Hardware_Flow_Control */ -} USART_InitTypeDef; - -/** - * @brief USART Clock Init Structure definition - */ - -typedef struct -{ - - uint16_t USART_Clock; /*!< Specifies whether the USART clock is enabled or disabled. - This parameter can be a value of @ref USART_Clock */ - - uint16_t USART_CPOL; /*!< Specifies the steady state of the serial clock. - This parameter can be a value of @ref USART_Clock_Polarity */ - - uint16_t USART_CPHA; /*!< Specifies the clock transition on which the bit capture is made. - This parameter can be a value of @ref USART_Clock_Phase */ - - uint16_t USART_LastBit; /*!< Specifies whether the clock pulse corresponding to the last transmitted - data bit (MSB) has to be output on the SCLK pin in synchronous mode. - This parameter can be a value of @ref USART_Last_Bit */ -} USART_ClockInitTypeDef; - -/* Exported constants --------------------------------------------------------*/ - -/** @defgroup USART_Exported_Constants - * @{ - */ - -#define IS_USART_ALL_PERIPH(PERIPH) (((PERIPH) == USART1) || \ - ((PERIPH) == USART2) || \ - ((PERIPH) == USART3) || \ - ((PERIPH) == UART4) || \ - ((PERIPH) == UART5) || \ - ((PERIPH) == USART6) || \ - ((PERIPH) == UART7) || \ - ((PERIPH) == UART8)) - -#define IS_USART_1236_PERIPH(PERIPH) (((PERIPH) == USART1) || \ - ((PERIPH) == USART2) || \ - ((PERIPH) == USART3) || \ - ((PERIPH) == USART6)) - -/** @defgroup USART_Word_Length - * @{ - */ - -#define USART_WordLength_8b ((uint16_t)0x0000) -#define USART_WordLength_9b ((uint16_t)0x1000) - -#define IS_USART_WORD_LENGTH(LENGTH) (((LENGTH) == USART_WordLength_8b) || \ - ((LENGTH) == USART_WordLength_9b)) -/** - * @} - */ - -/** @defgroup USART_Stop_Bits - * @{ - */ - -#define USART_StopBits_1 ((uint16_t)0x0000) -#define USART_StopBits_0_5 ((uint16_t)0x1000) -#define USART_StopBits_2 ((uint16_t)0x2000) -#define USART_StopBits_1_5 ((uint16_t)0x3000) -#define IS_USART_STOPBITS(STOPBITS) (((STOPBITS) == USART_StopBits_1) || \ - ((STOPBITS) == USART_StopBits_0_5) || \ - ((STOPBITS) == USART_StopBits_2) || \ - ((STOPBITS) == USART_StopBits_1_5)) -/** - * @} - */ - -/** @defgroup USART_Parity - * @{ - */ - -#define USART_Parity_No ((uint16_t)0x0000) -#define USART_Parity_Even ((uint16_t)0x0400) -#define USART_Parity_Odd ((uint16_t)0x0600) -#define IS_USART_PARITY(PARITY) (((PARITY) == USART_Parity_No) || \ - ((PARITY) == USART_Parity_Even) || \ - ((PARITY) == USART_Parity_Odd)) -/** - * @} - */ - -/** @defgroup USART_Mode - * @{ - */ - -#define USART_Mode_Rx ((uint16_t)0x0004) -#define USART_Mode_Tx ((uint16_t)0x0008) -#define IS_USART_MODE(MODE) ((((MODE) & (uint16_t)0xFFF3) == 0x00) && ((MODE) != (uint16_t)0x00)) -/** - * @} - */ - -/** @defgroup USART_Hardware_Flow_Control - * @{ - */ -#define USART_HardwareFlowControl_None ((uint16_t)0x0000) -#define USART_HardwareFlowControl_RTS ((uint16_t)0x0100) -#define USART_HardwareFlowControl_CTS ((uint16_t)0x0200) -#define USART_HardwareFlowControl_RTS_CTS ((uint16_t)0x0300) -#define IS_USART_HARDWARE_FLOW_CONTROL(CONTROL)\ - (((CONTROL) == USART_HardwareFlowControl_None) || \ - ((CONTROL) == USART_HardwareFlowControl_RTS) || \ - ((CONTROL) == USART_HardwareFlowControl_CTS) || \ - ((CONTROL) == USART_HardwareFlowControl_RTS_CTS)) -/** - * @} - */ - -/** @defgroup USART_Clock - * @{ - */ -#define USART_Clock_Disable ((uint16_t)0x0000) -#define USART_Clock_Enable ((uint16_t)0x0800) -#define IS_USART_CLOCK(CLOCK) (((CLOCK) == USART_Clock_Disable) || \ - ((CLOCK) == USART_Clock_Enable)) -/** - * @} - */ - -/** @defgroup USART_Clock_Polarity - * @{ - */ - -#define USART_CPOL_Low ((uint16_t)0x0000) -#define USART_CPOL_High ((uint16_t)0x0400) -#define IS_USART_CPOL(CPOL) (((CPOL) == USART_CPOL_Low) || ((CPOL) == USART_CPOL_High)) - -/** - * @} - */ - -/** @defgroup USART_Clock_Phase - * @{ - */ - -#define USART_CPHA_1Edge ((uint16_t)0x0000) -#define USART_CPHA_2Edge ((uint16_t)0x0200) -#define IS_USART_CPHA(CPHA) (((CPHA) == USART_CPHA_1Edge) || ((CPHA) == USART_CPHA_2Edge)) - -/** - * @} - */ - -/** @defgroup USART_Last_Bit - * @{ - */ - -#define USART_LastBit_Disable ((uint16_t)0x0000) -#define USART_LastBit_Enable ((uint16_t)0x0100) -#define IS_USART_LASTBIT(LASTBIT) (((LASTBIT) == USART_LastBit_Disable) || \ - ((LASTBIT) == USART_LastBit_Enable)) -/** - * @} - */ - -/** @defgroup USART_Interrupt_definition - * @{ - */ - -#define USART_IT_PE ((uint16_t)0x0028) -#define USART_IT_TXE ((uint16_t)0x0727) -#define USART_IT_TC ((uint16_t)0x0626) -#define USART_IT_RXNE ((uint16_t)0x0525) -#define USART_IT_ORE_RX ((uint16_t)0x0325) /* In case interrupt is generated if the RXNEIE bit is set */ -#define USART_IT_IDLE ((uint16_t)0x0424) -#define USART_IT_LBD ((uint16_t)0x0846) -#define USART_IT_CTS ((uint16_t)0x096A) -#define USART_IT_ERR ((uint16_t)0x0060) -#define USART_IT_ORE_ER ((uint16_t)0x0360) /* In case interrupt is generated if the EIE bit is set */ -#define USART_IT_NE ((uint16_t)0x0260) -#define USART_IT_FE ((uint16_t)0x0160) - -/** @defgroup USART_Legacy - * @{ - */ -#define USART_IT_ORE USART_IT_ORE_ER -/** - * @} - */ - -#define IS_USART_CONFIG_IT(IT) (((IT) == USART_IT_PE) || ((IT) == USART_IT_TXE) || \ - ((IT) == USART_IT_TC) || ((IT) == USART_IT_RXNE) || \ - ((IT) == USART_IT_IDLE) || ((IT) == USART_IT_LBD) || \ - ((IT) == USART_IT_CTS) || ((IT) == USART_IT_ERR)) -#define IS_USART_GET_IT(IT) (((IT) == USART_IT_PE) || ((IT) == USART_IT_TXE) || \ - ((IT) == USART_IT_TC) || ((IT) == USART_IT_RXNE) || \ - ((IT) == USART_IT_IDLE) || ((IT) == USART_IT_LBD) || \ - ((IT) == USART_IT_CTS) || ((IT) == USART_IT_ORE) || \ - ((IT) == USART_IT_ORE_RX) || ((IT) == USART_IT_ORE_ER) || \ - ((IT) == USART_IT_NE) || ((IT) == USART_IT_FE)) -#define IS_USART_CLEAR_IT(IT) (((IT) == USART_IT_TC) || ((IT) == USART_IT_RXNE) || \ - ((IT) == USART_IT_LBD) || ((IT) == USART_IT_CTS)) -/** - * @} - */ - -/** @defgroup USART_DMA_Requests - * @{ - */ - -#define USART_DMAReq_Tx ((uint16_t)0x0080) -#define USART_DMAReq_Rx ((uint16_t)0x0040) -#define IS_USART_DMAREQ(DMAREQ) ((((DMAREQ) & (uint16_t)0xFF3F) == 0x00) && ((DMAREQ) != (uint16_t)0x00)) - -/** - * @} - */ - -/** @defgroup USART_WakeUp_methods - * @{ - */ - -#define USART_WakeUp_IdleLine ((uint16_t)0x0000) -#define USART_WakeUp_AddressMark ((uint16_t)0x0800) -#define IS_USART_WAKEUP(WAKEUP) (((WAKEUP) == USART_WakeUp_IdleLine) || \ - ((WAKEUP) == USART_WakeUp_AddressMark)) -/** - * @} - */ - -/** @defgroup USART_LIN_Break_Detection_Length - * @{ - */ - -#define USART_LINBreakDetectLength_10b ((uint16_t)0x0000) -#define USART_LINBreakDetectLength_11b ((uint16_t)0x0020) -#define IS_USART_LIN_BREAK_DETECT_LENGTH(LENGTH) \ - (((LENGTH) == USART_LINBreakDetectLength_10b) || \ - ((LENGTH) == USART_LINBreakDetectLength_11b)) -/** - * @} - */ - -/** @defgroup USART_IrDA_Low_Power - * @{ - */ - -#define USART_IrDAMode_LowPower ((uint16_t)0x0004) -#define USART_IrDAMode_Normal ((uint16_t)0x0000) -#define IS_USART_IRDA_MODE(MODE) (((MODE) == USART_IrDAMode_LowPower) || \ - ((MODE) == USART_IrDAMode_Normal)) -/** - * @} - */ - -/** @defgroup USART_Flags - * @{ - */ - -#define USART_FLAG_CTS ((uint16_t)0x0200) -#define USART_FLAG_LBD ((uint16_t)0x0100) -#define USART_FLAG_TXE ((uint16_t)0x0080) -#define USART_FLAG_TC ((uint16_t)0x0040) -#define USART_FLAG_RXNE ((uint16_t)0x0020) -#define USART_FLAG_IDLE ((uint16_t)0x0010) -#define USART_FLAG_ORE ((uint16_t)0x0008) -#define USART_FLAG_NE ((uint16_t)0x0004) -#define USART_FLAG_FE ((uint16_t)0x0002) -#define USART_FLAG_PE ((uint16_t)0x0001) -#define IS_USART_FLAG(FLAG) (((FLAG) == USART_FLAG_PE) || ((FLAG) == USART_FLAG_TXE) || \ - ((FLAG) == USART_FLAG_TC) || ((FLAG) == USART_FLAG_RXNE) || \ - ((FLAG) == USART_FLAG_IDLE) || ((FLAG) == USART_FLAG_LBD) || \ - ((FLAG) == USART_FLAG_CTS) || ((FLAG) == USART_FLAG_ORE) || \ - ((FLAG) == USART_FLAG_NE) || ((FLAG) == USART_FLAG_FE)) - -#define IS_USART_CLEAR_FLAG(FLAG) ((((FLAG) & (uint16_t)0xFC9F) == 0x00) && ((FLAG) != (uint16_t)0x00)) - -#define IS_USART_BAUDRATE(BAUDRATE) (((BAUDRATE) > 0) && ((BAUDRATE) < 7500001)) -#define IS_USART_ADDRESS(ADDRESS) ((ADDRESS) <= 0xF) -#define IS_USART_DATA(DATA) ((DATA) <= 0x1FF) - -/** - * @} - */ - -/** - * @} - */ - -/* Exported macro ------------------------------------------------------------*/ -/* Exported functions --------------------------------------------------------*/ - -/* Function used to set the USART configuration to the default reset state ***/ -void USART_DeInit(USART_TypeDef* USARTx); - -/* Initialization and Configuration functions *********************************/ -void USART_Init(USART_TypeDef* USARTx, USART_InitTypeDef* USART_InitStruct); -void USART_StructInit(USART_InitTypeDef* USART_InitStruct); -void USART_ClockInit(USART_TypeDef* USARTx, USART_ClockInitTypeDef* USART_ClockInitStruct); -void USART_ClockStructInit(USART_ClockInitTypeDef* USART_ClockInitStruct); -void USART_Cmd(USART_TypeDef* USARTx, FunctionalState NewState); -void USART_SetPrescaler(USART_TypeDef* USARTx, uint8_t USART_Prescaler); -void USART_OverSampling8Cmd(USART_TypeDef* USARTx, FunctionalState NewState); -void USART_OneBitMethodCmd(USART_TypeDef* USARTx, FunctionalState NewState); - -/* Data transfers functions ***************************************************/ -void USART_SendData(USART_TypeDef* USARTx, uint16_t Data); -uint16_t USART_ReceiveData(USART_TypeDef* USARTx); - -/* Multi-Processor Communication functions ************************************/ -void USART_SetAddress(USART_TypeDef* USARTx, uint8_t USART_Address); -void USART_WakeUpConfig(USART_TypeDef* USARTx, uint16_t USART_WakeUp); -void USART_ReceiverWakeUpCmd(USART_TypeDef* USARTx, FunctionalState NewState); - -/* LIN mode functions *********************************************************/ -void USART_LINBreakDetectLengthConfig(USART_TypeDef* USARTx, uint16_t USART_LINBreakDetectLength); -void USART_LINCmd(USART_TypeDef* USARTx, FunctionalState NewState); -void USART_SendBreak(USART_TypeDef* USARTx); - -/* Half-duplex mode function **************************************************/ -void USART_HalfDuplexCmd(USART_TypeDef* USARTx, FunctionalState NewState); - -/* Smartcard mode functions ***************************************************/ -void USART_SmartCardCmd(USART_TypeDef* USARTx, FunctionalState NewState); -void USART_SmartCardNACKCmd(USART_TypeDef* USARTx, FunctionalState NewState); -void USART_SetGuardTime(USART_TypeDef* USARTx, uint8_t USART_GuardTime); - -/* IrDA mode functions ********************************************************/ -void USART_IrDAConfig(USART_TypeDef* USARTx, uint16_t USART_IrDAMode); -void USART_IrDACmd(USART_TypeDef* USARTx, FunctionalState NewState); - -/* DMA transfers management functions *****************************************/ -void USART_DMACmd(USART_TypeDef* USARTx, uint16_t USART_DMAReq, FunctionalState NewState); - -/* Interrupts and flags management functions **********************************/ -void USART_ITConfig(USART_TypeDef* USARTx, uint16_t USART_IT, FunctionalState NewState); -FlagStatus USART_GetFlagStatus(USART_TypeDef* USARTx, uint16_t USART_FLAG); -void USART_ClearFlag(USART_TypeDef* USARTx, uint16_t USART_FLAG); -ITStatus USART_GetITStatus(USART_TypeDef* USARTx, uint16_t USART_IT); -void USART_ClearITPendingBit(USART_TypeDef* USARTx, uint16_t USART_IT); - -#ifdef __cplusplus -} -#endif - -#endif /* __STM32F4xx_USART_H */ - -/** - * @} - */ - -/** - * @} - */ - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/stm/lib/stm_misc.c b/stm/lib/stm_misc.c deleted file mode 100644 index 875584a66..000000000 --- a/stm/lib/stm_misc.c +++ /dev/null @@ -1,249 +0,0 @@ -/** - ****************************************************************************** - * @file misc.c - * @author MCD Application Team - * @version V1.3.0 - * @date 08-November-2013 - * @brief This file provides all the miscellaneous firmware functions (add-on - * to CMSIS functions). - * - * @verbatim - * - * =================================================================== - * How to configure Interrupts using driver - * =================================================================== - * - * This section provide functions allowing to configure the NVIC interrupts (IRQ). - * The Cortex-M4 exceptions are managed by CMSIS functions. - * - * 1. Configure the NVIC Priority Grouping using NVIC_PriorityGroupConfig() - * function according to the following table. - - * The table below gives the allowed values of the pre-emption priority and subpriority according - * to the Priority Grouping configuration performed by NVIC_PriorityGroupConfig function - * ========================================================================================================================== - * NVIC_PriorityGroup | NVIC_IRQChannelPreemptionPriority | NVIC_IRQChannelSubPriority | Description - * ========================================================================================================================== - * NVIC_PriorityGroup_0 | 0 | 0-15 | 0 bits for pre-emption priority - * | | | 4 bits for subpriority - * -------------------------------------------------------------------------------------------------------------------------- - * NVIC_PriorityGroup_1 | 0-1 | 0-7 | 1 bits for pre-emption priority - * | | | 3 bits for subpriority - * -------------------------------------------------------------------------------------------------------------------------- - * NVIC_PriorityGroup_2 | 0-3 | 0-3 | 2 bits for pre-emption priority - * | | | 2 bits for subpriority - * -------------------------------------------------------------------------------------------------------------------------- - * NVIC_PriorityGroup_3 | 0-7 | 0-1 | 3 bits for pre-emption priority - * | | | 1 bits for subpriority - * -------------------------------------------------------------------------------------------------------------------------- - * NVIC_PriorityGroup_4 | 0-15 | 0 | 4 bits for pre-emption priority - * | | | 0 bits for subpriority - * ========================================================================================================================== - * - * 2. Enable and Configure the priority of the selected IRQ Channels using NVIC_Init() - * - * @note When the NVIC_PriorityGroup_0 is selected, IRQ pre-emption is no more possible. - * The pending IRQ priority will be managed only by the subpriority. - * - * @note IRQ priority order (sorted by highest to lowest priority): - * - Lowest pre-emption priority - * - Lowest subpriority - * - Lowest hardware priority (IRQ number) - * - * @endverbatim - * - ****************************************************************************** - * @attention - * - *

© COPYRIGHT 2013 STMicroelectronics

- * - * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License"); - * You may not use this file except in compliance with the License. - * You may obtain a copy of the License at: - * - * http://www.st.com/software_license_agreement_liberty_v2 - * - * Unless required by applicable law or agreed to in writing, software - * distributed under the License is distributed on an "AS IS" BASIS, - * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - * See the License for the specific language governing permissions and - * limitations under the License. - * - ****************************************************************************** - */ - -/* Includes ------------------------------------------------------------------*/ -#include "stm_misc.h" - -/** @addtogroup STM32F4xx_StdPeriph_Driver - * @{ - */ - -/** @defgroup MISC - * @brief MISC driver modules - * @{ - */ - -/* Private typedef -----------------------------------------------------------*/ -/* Private define ------------------------------------------------------------*/ -#define AIRCR_VECTKEY_MASK ((uint32_t)0x05FA0000) - -/* Private macro -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -/* Private function prototypes -----------------------------------------------*/ -/* Private functions ---------------------------------------------------------*/ - -/** @defgroup MISC_Private_Functions - * @{ - */ - -/** - * @brief Configures the priority grouping: pre-emption priority and subpriority. - * @param NVIC_PriorityGroup: specifies the priority grouping bits length. - * This parameter can be one of the following values: - * @arg NVIC_PriorityGroup_0: 0 bits for pre-emption priority - * 4 bits for subpriority - * @arg NVIC_PriorityGroup_1: 1 bits for pre-emption priority - * 3 bits for subpriority - * @arg NVIC_PriorityGroup_2: 2 bits for pre-emption priority - * 2 bits for subpriority - * @arg NVIC_PriorityGroup_3: 3 bits for pre-emption priority - * 1 bits for subpriority - * @arg NVIC_PriorityGroup_4: 4 bits for pre-emption priority - * 0 bits for subpriority - * @note When the NVIC_PriorityGroup_0 is selected, IRQ pre-emption is no more possible. - * The pending IRQ priority will be managed only by the subpriority. - * @retval None - */ -void NVIC_PriorityGroupConfig(uint32_t NVIC_PriorityGroup) -{ - /* Check the parameters */ - assert_param(IS_NVIC_PRIORITY_GROUP(NVIC_PriorityGroup)); - - /* Set the PRIGROUP[10:8] bits according to NVIC_PriorityGroup value */ - SCB->AIRCR = AIRCR_VECTKEY_MASK | NVIC_PriorityGroup; -} - -/** - * @brief Initializes the NVIC peripheral according to the specified - * parameters in the NVIC_InitStruct. - * @note To configure interrupts priority correctly, the NVIC_PriorityGroupConfig() - * function should be called before. - * @param NVIC_InitStruct: pointer to a NVIC_InitTypeDef structure that contains - * the configuration information for the specified NVIC peripheral. - * @retval None - */ -void NVIC_Init(NVIC_InitTypeDef* NVIC_InitStruct) -{ - uint8_t tmppriority = 0x00, tmppre = 0x00, tmpsub = 0x0F; - - /* Check the parameters */ - assert_param(IS_FUNCTIONAL_STATE(NVIC_InitStruct->NVIC_IRQChannelCmd)); - assert_param(IS_NVIC_PREEMPTION_PRIORITY(NVIC_InitStruct->NVIC_IRQChannelPreemptionPriority)); - assert_param(IS_NVIC_SUB_PRIORITY(NVIC_InitStruct->NVIC_IRQChannelSubPriority)); - - if (NVIC_InitStruct->NVIC_IRQChannelCmd != DISABLE) - { - /* Compute the Corresponding IRQ Priority --------------------------------*/ - tmppriority = (0x700 - ((SCB->AIRCR) & (uint32_t)0x700))>> 0x08; - tmppre = (0x4 - tmppriority); - tmpsub = tmpsub >> tmppriority; - - tmppriority = NVIC_InitStruct->NVIC_IRQChannelPreemptionPriority << tmppre; - tmppriority |= (uint8_t)(NVIC_InitStruct->NVIC_IRQChannelSubPriority & tmpsub); - - tmppriority = tmppriority << 0x04; - - NVIC->IP[NVIC_InitStruct->NVIC_IRQChannel] = tmppriority; - - /* Enable the Selected IRQ Channels --------------------------------------*/ - NVIC->ISER[NVIC_InitStruct->NVIC_IRQChannel >> 0x05] = - (uint32_t)0x01 << (NVIC_InitStruct->NVIC_IRQChannel & (uint8_t)0x1F); - } - else - { - /* Disable the Selected IRQ Channels -------------------------------------*/ - NVIC->ICER[NVIC_InitStruct->NVIC_IRQChannel >> 0x05] = - (uint32_t)0x01 << (NVIC_InitStruct->NVIC_IRQChannel & (uint8_t)0x1F); - } -} - -/** - * @brief Sets the vector table location and Offset. - * @param NVIC_VectTab: specifies if the vector table is in RAM or FLASH memory. - * This parameter can be one of the following values: - * @arg NVIC_VectTab_RAM: Vector Table in internal SRAM. - * @arg NVIC_VectTab_FLASH: Vector Table in internal FLASH. - * @param Offset: Vector Table base offset field. This value must be a multiple of 0x200. - * @retval None - */ -void NVIC_SetVectorTable(uint32_t NVIC_VectTab, uint32_t Offset) -{ - /* Check the parameters */ - assert_param(IS_NVIC_VECTTAB(NVIC_VectTab)); - assert_param(IS_NVIC_OFFSET(Offset)); - - SCB->VTOR = NVIC_VectTab | (Offset & (uint32_t)0x1FFFFF80); -} - -/** - * @brief Selects the condition for the system to enter low power mode. - * @param LowPowerMode: Specifies the new mode for the system to enter low power mode. - * This parameter can be one of the following values: - * @arg NVIC_LP_SEVONPEND: Low Power SEV on Pend. - * @arg NVIC_LP_SLEEPDEEP: Low Power DEEPSLEEP request. - * @arg NVIC_LP_SLEEPONEXIT: Low Power Sleep on Exit. - * @param NewState: new state of LP condition. This parameter can be: ENABLE or DISABLE. - * @retval None - */ -void NVIC_SystemLPConfig(uint8_t LowPowerMode, FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_NVIC_LP(LowPowerMode)); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - - if (NewState != DISABLE) - { - SCB->SCR |= LowPowerMode; - } - else - { - SCB->SCR &= (uint32_t)(~(uint32_t)LowPowerMode); - } -} - -/** - * @brief Configures the SysTick clock source. - * @param SysTick_CLKSource: specifies the SysTick clock source. - * This parameter can be one of the following values: - * @arg SysTick_CLKSource_HCLK_Div8: AHB clock divided by 8 selected as SysTick clock source. - * @arg SysTick_CLKSource_HCLK: AHB clock selected as SysTick clock source. - * @retval None - */ -void SysTick_CLKSourceConfig(uint32_t SysTick_CLKSource) -{ - /* Check the parameters */ - assert_param(IS_SYSTICK_CLK_SOURCE(SysTick_CLKSource)); - if (SysTick_CLKSource == SysTick_CLKSource_HCLK) - { - SysTick->CTRL |= SysTick_CLKSource_HCLK; - } - else - { - SysTick->CTRL &= SysTick_CLKSource_HCLK_Div8; - } -} - -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/stm/lib/stm_misc.h b/stm/lib/stm_misc.h deleted file mode 100644 index 2d08fdd63..000000000 --- a/stm/lib/stm_misc.h +++ /dev/null @@ -1,178 +0,0 @@ -/** - ****************************************************************************** - * @file misc.h - * @author MCD Application Team - * @version V1.3.0 - * @date 08-November-2013 - * @brief This file contains all the functions prototypes for the miscellaneous - * firmware library functions (add-on to CMSIS functions). - ****************************************************************************** - * @attention - * - *

© COPYRIGHT 2013 STMicroelectronics

- * - * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License"); - * You may not use this file except in compliance with the License. - * You may obtain a copy of the License at: - * - * http://www.st.com/software_license_agreement_liberty_v2 - * - * Unless required by applicable law or agreed to in writing, software - * distributed under the License is distributed on an "AS IS" BASIS, - * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - * See the License for the specific language governing permissions and - * limitations under the License. - * - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __MISC_H -#define __MISC_H - -#ifdef __cplusplus - extern "C" { -#endif - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx.h" - -/** @addtogroup STM32F4xx_StdPeriph_Driver - * @{ - */ - -/** @addtogroup MISC - * @{ - */ - -/* Exported types ------------------------------------------------------------*/ - -/** - * @brief NVIC Init Structure definition - */ - -typedef struct -{ - uint8_t NVIC_IRQChannel; /*!< Specifies the IRQ channel to be enabled or disabled. - This parameter can be an enumerator of @ref IRQn_Type - enumeration (For the complete STM32 Devices IRQ Channels - list, please refer to stm32f4xx.h file) */ - - uint8_t NVIC_IRQChannelPreemptionPriority; /*!< Specifies the pre-emption priority for the IRQ channel - specified in NVIC_IRQChannel. This parameter can be a value - between 0 and 15 as described in the table @ref MISC_NVIC_Priority_Table - A lower priority value indicates a higher priority */ - - uint8_t NVIC_IRQChannelSubPriority; /*!< Specifies the subpriority level for the IRQ channel specified - in NVIC_IRQChannel. This parameter can be a value - between 0 and 15 as described in the table @ref MISC_NVIC_Priority_Table - A lower priority value indicates a higher priority */ - - FunctionalState NVIC_IRQChannelCmd; /*!< Specifies whether the IRQ channel defined in NVIC_IRQChannel - will be enabled or disabled. - This parameter can be set either to ENABLE or DISABLE */ -} NVIC_InitTypeDef; - -/* Exported constants --------------------------------------------------------*/ - -/** @defgroup MISC_Exported_Constants - * @{ - */ - -/** @defgroup MISC_Vector_Table_Base - * @{ - */ - -#define NVIC_VectTab_RAM ((uint32_t)0x20000000) -#define NVIC_VectTab_FLASH ((uint32_t)0x08000000) -#define IS_NVIC_VECTTAB(VECTTAB) (((VECTTAB) == NVIC_VectTab_RAM) || \ - ((VECTTAB) == NVIC_VectTab_FLASH)) -/** - * @} - */ - -/** @defgroup MISC_System_Low_Power - * @{ - */ - -#define NVIC_LP_SEVONPEND ((uint8_t)0x10) -#define NVIC_LP_SLEEPDEEP ((uint8_t)0x04) -#define NVIC_LP_SLEEPONEXIT ((uint8_t)0x02) -#define IS_NVIC_LP(LP) (((LP) == NVIC_LP_SEVONPEND) || \ - ((LP) == NVIC_LP_SLEEPDEEP) || \ - ((LP) == NVIC_LP_SLEEPONEXIT)) -/** - * @} - */ - -/** @defgroup MISC_Preemption_Priority_Group - * @{ - */ - -#define NVIC_PriorityGroup_0 ((uint32_t)0x700) /*!< 0 bits for pre-emption priority - 4 bits for subpriority */ -#define NVIC_PriorityGroup_1 ((uint32_t)0x600) /*!< 1 bits for pre-emption priority - 3 bits for subpriority */ -#define NVIC_PriorityGroup_2 ((uint32_t)0x500) /*!< 2 bits for pre-emption priority - 2 bits for subpriority */ -#define NVIC_PriorityGroup_3 ((uint32_t)0x400) /*!< 3 bits for pre-emption priority - 1 bits for subpriority */ -#define NVIC_PriorityGroup_4 ((uint32_t)0x300) /*!< 4 bits for pre-emption priority - 0 bits for subpriority */ - -#define IS_NVIC_PRIORITY_GROUP(GROUP) (((GROUP) == NVIC_PriorityGroup_0) || \ - ((GROUP) == NVIC_PriorityGroup_1) || \ - ((GROUP) == NVIC_PriorityGroup_2) || \ - ((GROUP) == NVIC_PriorityGroup_3) || \ - ((GROUP) == NVIC_PriorityGroup_4)) - -#define IS_NVIC_PREEMPTION_PRIORITY(PRIORITY) ((PRIORITY) < 0x10) - -#define IS_NVIC_SUB_PRIORITY(PRIORITY) ((PRIORITY) < 0x10) - -#define IS_NVIC_OFFSET(OFFSET) ((OFFSET) < 0x000FFFFF) - -/** - * @} - */ - -/** @defgroup MISC_SysTick_clock_source - * @{ - */ - -#define SysTick_CLKSource_HCLK_Div8 ((uint32_t)0xFFFFFFFB) -#define SysTick_CLKSource_HCLK ((uint32_t)0x00000004) -#define IS_SYSTICK_CLK_SOURCE(SOURCE) (((SOURCE) == SysTick_CLKSource_HCLK) || \ - ((SOURCE) == SysTick_CLKSource_HCLK_Div8)) -/** - * @} - */ - -/** - * @} - */ - -/* Exported macro ------------------------------------------------------------*/ -/* Exported functions --------------------------------------------------------*/ - -void NVIC_PriorityGroupConfig(uint32_t NVIC_PriorityGroup); -void NVIC_Init(NVIC_InitTypeDef* NVIC_InitStruct); -void NVIC_SetVectorTable(uint32_t NVIC_VectTab, uint32_t Offset); -void NVIC_SystemLPConfig(uint8_t LowPowerMode, FunctionalState NewState); -void SysTick_CLKSourceConfig(uint32_t SysTick_CLKSource); - -#ifdef __cplusplus -} -#endif - -#endif /* __MISC_H */ - -/** - * @} - */ - -/** - * @} - */ - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/stm/lib/system_stm32f4xx.h b/stm/lib/system_stm32f4xx.h deleted file mode 100644 index 675593a84..000000000 --- a/stm/lib/system_stm32f4xx.h +++ /dev/null @@ -1,105 +0,0 @@ -/** - ****************************************************************************** - * @file system_stm32f4xx.h - * @author MCD Application Team - * @version V1.3.0 - * @date 08-November-2013 - * @brief CMSIS Cortex-M4 Device System Source File for STM32F4xx devices. - ****************************************************************************** - * @attention - * - *

© COPYRIGHT 2013 STMicroelectronics

- * - * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License"); - * You may not use this file except in compliance with the License. - * You may obtain a copy of the License at: - * - * http://www.st.com/software_license_agreement_liberty_v2 - * - * Unless required by applicable law or agreed to in writing, software - * distributed under the License is distributed on an "AS IS" BASIS, - * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - * See the License for the specific language governing permissions and - * limitations under the License. - * - ****************************************************************************** - */ - -/** @addtogroup CMSIS - * @{ - */ - -/** @addtogroup stm32f4xx_system - * @{ - */ - -/** - * @brief Define to prevent recursive inclusion - */ -#ifndef __SYSTEM_STM32F4XX_H -#define __SYSTEM_STM32F4XX_H - -#ifdef __cplusplus - extern "C" { -#endif - -/** @addtogroup STM32F4xx_System_Includes - * @{ - */ - -/** - * @} - */ - - -/** @addtogroup STM32F4xx_System_Exported_types - * @{ - */ - -extern uint32_t SystemCoreClock; /*!< System Clock Frequency (Core Clock) */ - - -/** - * @} - */ - -/** @addtogroup STM32F4xx_System_Exported_Constants - * @{ - */ - -/** - * @} - */ - -/** @addtogroup STM32F4xx_System_Exported_Macros - * @{ - */ - -/** - * @} - */ - -/** @addtogroup STM32F4xx_System_Exported_Functions - * @{ - */ - -extern void SystemInit(void); -extern void SystemCoreClockUpdate(void); -/** - * @} - */ - -#ifdef __cplusplus -} -#endif - -#endif /*__SYSTEM_STM32F4XX_H */ - -/** - * @} - */ - -/** - * @} - */ -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/stm/lib/usb_bsp.c b/stm/lib/usb_bsp.c deleted file mode 100644 index e88e31db0..000000000 --- a/stm/lib/usb_bsp.c +++ /dev/null @@ -1,272 +0,0 @@ -/** - ****************************************************************************** - * @file usb_bsp.c - * @author MCD Application Team - * @version V1.1.0 - * @date 19-March-2012 - * @brief This file is responsible to offer board support package and is - * configurable by user. - ****************************************************************************** - * @attention - * - *

© COPYRIGHT 2012 STMicroelectronics

- * - * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License"); - * You may not use this file except in compliance with the License. - * You may obtain a copy of the License at: - * - * http://www.st.com/software_license_agreement_liberty_v2 - * - * Unless required by applicable law or agreed to in writing, software - * distributed under the License is distributed on an "AS IS" BASIS, - * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - * See the License for the specific language governing permissions and - * limitations under the License. - * - ****************************************************************************** - */ - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx_gpio.h" -#include "stm32f4xx_rcc.h" -#include "stm_misc.h" -#include "usb_bsp.h" - -/** @addtogroup STM32_USB_OTG_DEVICE_LIBRARY -* @{ -*/ - -/** @defgroup USB_BSP -* @brief This file is responsible to offer board support package -* @{ -*/ - -/** @defgroup USB_BSP_Private_Defines -* @{ -*/ -/** -* @} -*/ - - -/** @defgroup USB_BSP_Private_TypesDefinitions -* @{ -*/ -/** -* @} -*/ - - - - - -/** @defgroup USB_BSP_Private_Macros -* @{ -*/ -/** -* @} -*/ - -/** @defgroup USBH_BSP_Private_Variables -* @{ -*/ - -/** -* @} -*/ - -/** @defgroup USBH_BSP_Private_FunctionPrototypes -* @{ -*/ -/** -* @} -*/ - -/** @defgroup USB_BSP_Private_Functions -* @{ -*/ - - -/** -* @brief USB_OTG_BSP_Init -* Initilizes BSP configurations -* @param None -* @retval None -*/ - -void USB_OTG_BSP_Init(USB_OTG_CORE_HANDLE *pdev) { - RCC_AHB1PeriphClockCmd(RCC_AHB1Periph_GPIOA, ENABLE); - - /* Configure DM DP Pins */ - GPIO_InitTypeDef GPIO_InitStructure; - GPIO_InitStructure.GPIO_Pin = GPIO_Pin_11 | GPIO_Pin_12; - GPIO_InitStructure.GPIO_Speed = GPIO_Speed_100MHz; - GPIO_InitStructure.GPIO_Mode = GPIO_Mode_AF; - GPIO_InitStructure.GPIO_OType = GPIO_OType_PP; - GPIO_InitStructure.GPIO_PuPd = GPIO_PuPd_NOPULL ; - GPIO_Init(GPIOA, &GPIO_InitStructure); - - GPIO_PinAFConfig(GPIOA, GPIO_PinSource11, GPIO_AF_OTG_FS); - GPIO_PinAFConfig(GPIOA, GPIO_PinSource12, GPIO_AF_OTG_FS); - - /* Configure VBUS Pin (or disable VBUS_SENSING_ENABLED) */ - GPIO_InitStructure.GPIO_Pin = GPIO_Pin_9; - GPIO_InitStructure.GPIO_Speed = GPIO_Speed_100MHz; - GPIO_InitStructure.GPIO_Mode = GPIO_Mode_IN; - GPIO_InitStructure.GPIO_OType = GPIO_OType_OD; - GPIO_InitStructure.GPIO_PuPd = GPIO_PuPd_NOPULL ; - GPIO_Init(GPIOA, &GPIO_InitStructure); - - /* - // Configure ID pin (only in host mode) - GPIO_InitStructure.GPIO_Pin = GPIO_Pin_10; - GPIO_InitStructure.GPIO_Speed = GPIO_Speed_100MHz; - GPIO_InitStructure.GPIO_Mode = GPIO_Mode_IN; - GPIO_InitStructure.GPIO_OType = GPIO_OType_OD; - GPIO_InitStructure.GPIO_PuPd = GPIO_PuPd_UP ; - GPIO_Init(GPIOA, &GPIO_InitStructure); - GPIO_PinAFConfig(GPIOA, GPIO_PinSource10, GPIO_AF_OTG_FS); - */ - - RCC_APB2PeriphClockCmd(RCC_APB2Periph_SYSCFG, ENABLE); - RCC_AHB2PeriphClockCmd(RCC_AHB2Periph_OTG_FS, ENABLE); -} - -/** -* @brief USB_OTG_BSP_EnableInterrupt -* Enable USB Global interrupt -* @param None -* @retval None -*/ -void USB_OTG_BSP_EnableInterrupt(USB_OTG_CORE_HANDLE *pdev) { - // this assumes we use NVIC_PriorityGroup_4 - NVIC_InitTypeDef NVIC_InitStructure; - NVIC_InitStructure.NVIC_IRQChannel = OTG_FS_IRQn; - NVIC_InitStructure.NVIC_IRQChannelPreemptionPriority = 8; - NVIC_InitStructure.NVIC_IRQChannelSubPriority = 0; - NVIC_InitStructure.NVIC_IRQChannelCmd = ENABLE; - NVIC_Init(&NVIC_InitStructure); -} - -/** -* @brief BSP_Drive_VBUS -* Drives the Vbus signal through IO -* @param state : VBUS states -* @retval None -*/ - -void USB_OTG_BSP_DriveVBUS(USB_OTG_CORE_HANDLE *pdev, uint8_t state) { - //printf("DriveVBUS %p %u\n", pdev, state); - /* - On-chip 5 V VBUS generation is not supported. For this reason, a charge pump - or, if 5 V are available on the application board, a basic power switch, must - be added externally to drive the 5 V VBUS line. The external charge pump can - be driven by any GPIO output. When the application decides to power on VBUS - using the chosen GPIO, it must also set the port power bit in the host port - control and status register (PPWR bit in OTG_FS_HPRT). - - Bit 12 PPWR: Port power - The application uses this field to control power to this port, and the core - clears this bit on an overcurrent condition. - */ -#if 0 // not implemented -#ifndef USE_USB_OTG_HS - if (0 == state) { - /* DISABLE is needed on output of the Power Switch */ - GPIO_SetBits(HOST_POWERSW_PORT, HOST_POWERSW_VBUS); - } else { - /*ENABLE the Power Switch by driving the Enable LOW */ - GPIO_ResetBits(HOST_POWERSW_PORT, HOST_POWERSW_VBUS); - } -#endif -#endif -} - -/** - * @brief USB_OTG_BSP_ConfigVBUS - * Configures the IO for the Vbus and OverCurrent - * @param None - * @retval None - */ - -void USB_OTG_BSP_ConfigVBUS(USB_OTG_CORE_HANDLE *pdev) { - //printf("ConfigVBUS %p\n", pdev); -#if 0 // not implemented -#ifdef USE_USB_OTG_FS - GPIO_InitTypeDef GPIO_InitStructure; - -#ifdef USE_STM3210C_EVAL - RCC_APB2PeriphClockCmd(HOST_POWERSW_PORT_RCC, ENABLE); - - - /* Configure Power Switch Vbus Pin */ - GPIO_InitStructure.GPIO_Pin = HOST_POWERSW_VBUS; - GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz; - GPIO_InitStructure.GPIO_Mode = GPIO_Mode_Out_PP; - GPIO_Init(HOST_POWERSW_PORT, &GPIO_InitStructure); -#else - #ifdef USE_USB_OTG_FS - RCC_AHB1PeriphClockCmd( RCC_AHB1Periph_GPIOH , ENABLE); - - GPIO_InitStructure.GPIO_Pin = HOST_POWERSW_VBUS; - GPIO_InitStructure.GPIO_Speed = GPIO_Speed_100MHz; - GPIO_InitStructure.GPIO_Mode = GPIO_Mode_OUT; - GPIO_InitStructure.GPIO_OType = GPIO_OType_PP; - GPIO_InitStructure.GPIO_PuPd = GPIO_PuPd_NOPULL ; - GPIO_Init(HOST_POWERSW_PORT,&GPIO_InitStructure); - #endif -#endif - - /* By Default, DISABLE is needed on output of the Power Switch */ - GPIO_SetBits(HOST_POWERSW_PORT, HOST_POWERSW_VBUS); - - USB_OTG_BSP_mDelay(200); /* Delay is need for stabilising the Vbus Low - in Reset Condition, when Vbus=1 and Reset-button is pressed by user */ -#endif -#endif -} - -/** -* @brief USB_OTG_BSP_uDelay -* This function provides delay time in micro sec -* @param usec : Value of delay required in micro sec -* @retval None -*/ -void USB_OTG_BSP_uDelay (const uint32_t usec) -{ - uint32_t count = 0; - const uint32_t utime = (160 * usec / 5); - do - { - if ( ++count > utime ) - { - return ; - } - } - while (1); -} - - -/** -* @brief USB_OTG_BSP_mDelay -* This function provides delay time in milli sec -* @param msec : Value of delay required in milli sec -* @retval None -*/ -void USB_OTG_BSP_mDelay (const uint32_t msec) -{ - USB_OTG_BSP_uDelay(msec * 1000); -} -/** -* @} -*/ - -/** -* @} -*/ - -/** -* @} -*/ - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/stm/lib/usb_bsp.h b/stm/lib/usb_bsp.h deleted file mode 100644 index 29763a906..000000000 --- a/stm/lib/usb_bsp.h +++ /dev/null @@ -1,103 +0,0 @@ -/** - ****************************************************************************** - * @file usb_bsp.h - * @author MCD Application Team - * @version V2.1.0 - * @date 19-March-2012 - * @brief Specific api's relative to the used hardware platform - ****************************************************************************** - * @attention - * - *

© COPYRIGHT 2012 STMicroelectronics

- * - * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License"); - * You may not use this file except in compliance with the License. - * You may obtain a copy of the License at: - * - * http://www.st.com/software_license_agreement_liberty_v2 - * - * Unless required by applicable law or agreed to in writing, software - * distributed under the License is distributed on an "AS IS" BASIS, - * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - * See the License for the specific language governing permissions and - * limitations under the License. - * - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __USB_BSP__H__ -#define __USB_BSP__H__ - -/* Includes ------------------------------------------------------------------*/ -#include "usb_core.h" -#include "usb_conf.h" - -/** @addtogroup USB_OTG_DRIVER - * @{ - */ - -/** @defgroup USB_BSP - * @brief This file is the - * @{ - */ - - -/** @defgroup USB_BSP_Exported_Defines - * @{ - */ -/** - * @} - */ - - -/** @defgroup USB_BSP_Exported_Types - * @{ - */ -/** - * @} - */ - - -/** @defgroup USB_BSP_Exported_Macros - * @{ - */ -/** - * @} - */ - -/** @defgroup USB_BSP_Exported_Variables - * @{ - */ -/** - * @} - */ - -/** @defgroup USB_BSP_Exported_FunctionsPrototype - * @{ - */ -void BSP_Init(void); - -void USB_OTG_BSP_Init (USB_OTG_CORE_HANDLE *pdev); -void USB_OTG_BSP_uDelay (const uint32_t usec); -void USB_OTG_BSP_mDelay (const uint32_t msec); -void USB_OTG_BSP_EnableInterrupt (USB_OTG_CORE_HANDLE *pdev); -#ifdef USE_HOST_MODE -void USB_OTG_BSP_ConfigVBUS(USB_OTG_CORE_HANDLE *pdev); -void USB_OTG_BSP_DriveVBUS(USB_OTG_CORE_HANDLE *pdev,uint8_t state); -#endif -/** - * @} - */ - -#endif //__USB_BSP__H__ - -/** - * @} - */ - -/** - * @} - */ -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ - diff --git a/stm/lib/usb_conf.h b/stm/lib/usb_conf.h deleted file mode 100644 index a51a23a84..000000000 --- a/stm/lib/usb_conf.h +++ /dev/null @@ -1,348 +0,0 @@ -/** - ****************************************************************************** - * @file usb_conf.h - * @author MCD Application Team - * @version V1.1.0 - * @date 19-March-2012 - * @brief General low level driver configuration - ****************************************************************************** - * @attention - * - *

© COPYRIGHT 2012 STMicroelectronics

- * - * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License"); - * You may not use this file except in compliance with the License. - * You may obtain a copy of the License at: - * - * http://www.st.com/software_license_agreement_liberty_v2 - * - * Unless required by applicable law or agreed to in writing, software - * distributed under the License is distributed on an "AS IS" BASIS, - * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - * See the License for the specific language governing permissions and - * limitations under the License. - * - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __USB_CONF__H__ -#define __USB_CONF__H__ - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx.h" -//#include "stm324xg_eval.h" -//#include "stm324xg_eval_lcd.h" -//#include "stm324xg_eval_ioe.h" -//#include "stm324xg_eval_sdio_sd.h" - - -/** @addtogroup USB_OTG_DRIVER - * @{ - */ - -/** @defgroup USB_CONF - * @brief USB low level driver configuration file - * @{ - */ - -/** @defgroup USB_CONF_Exported_Defines - * @{ - */ - -/* USB Core and PHY interface configuration. - Tip: To avoid modifying these defines each time you need to change the USB - configuration, you can declare the needed define in your toolchain - compiler preprocessor. - */ -/****************** USB OTG FS PHY CONFIGURATION ******************************* -* The USB OTG FS Core supports one on-chip Full Speed PHY. -* -* The USE_EMBEDDED_PHY symbol is defined in the project compiler preprocessor -* when FS core is used. -*******************************************************************************/ -#ifndef USE_USB_OTG_FS - #define USE_USB_OTG_FS -#endif /* USE_USB_OTG_FS */ - -#ifdef USE_USB_OTG_FS - #define USB_OTG_FS_CORE -#endif - -/****************** USB OTG HS PHY CONFIGURATION ******************************* -* The USB OTG HS Core supports two PHY interfaces: -* (i) An ULPI interface for the external High Speed PHY: the USB HS Core will -* operate in High speed mode -* (ii) An on-chip Full Speed PHY: the USB HS Core will operate in Full speed mode -* -* You can select the PHY to be used using one of these two defines: -* (i) USE_ULPI_PHY: if the USB OTG HS Core is to be used in High speed mode -* (ii) USE_EMBEDDED_PHY: if the USB OTG HS Core is to be used in Full speed mode -* -* Notes: -* - The USE_ULPI_PHY symbol is defined in the project compiler preprocessor as -* default PHY when HS core is used. -* - On STM322xG-EVAL and STM324xG-EVAL boards, only configuration(i) is available. -* Configuration (ii) need a different hardware, for more details refer to your -* STM32 device datasheet. -*******************************************************************************/ -#ifndef USE_USB_OTG_HS - //#define USE_USB_OTG_HS -#endif /* USE_USB_OTG_HS */ - -#ifndef USE_ULPI_PHY - //#define USE_ULPI_PHY -#endif /* USE_ULPI_PHY */ - -#ifndef USE_EMBEDDED_PHY - //#define USE_EMBEDDED_PHY -#endif /* USE_EMBEDDED_PHY */ - -#ifdef USE_USB_OTG_HS - #define USB_OTG_HS_CORE -#endif - -/******************************************************************************* -* FIFO Size Configuration in Device mode -* -* (i) Receive data FIFO size = RAM for setup packets + -* OUT endpoint control information + -* data OUT packets + miscellaneous -* Space = ONE 32-bits words -* --> RAM for setup packets = 10 spaces -* (n is the nbr of CTRL EPs the device core supports) -* --> OUT EP CTRL info = 1 space -* (one space for status information written to the FIFO along with each -* received packet) -* --> data OUT packets = (Largest Packet Size / 4) + 1 spaces -* (MINIMUM to receive packets) -* --> OR data OUT packets = at least 2*(Largest Packet Size / 4) + 1 spaces -* (if high-bandwidth EP is enabled or multiple isochronous EPs) -* --> miscellaneous = 1 space per OUT EP -* (one space for transfer complete status information also pushed to the -* FIFO with each endpoint's last packet) -* -* (ii)MINIMUM RAM space required for each IN EP Tx FIFO = MAX packet size for -* that particular IN EP. More space allocated in the IN EP Tx FIFO results -* in a better performance on the USB and can hide latencies on the AHB. -* -* (iii) TXn min size = 16 words. (n : Transmit FIFO index) -* (iv) When a TxFIFO is not used, the Configuration should be as follows: -* case 1 : n > m and Txn is not used (n,m : Transmit FIFO indexes) -* --> Txm can use the space allocated for Txn. -* case2 : n < m and Txn is not used (n,m : Transmit FIFO indexes) -* --> Txn should be configured with the minimum space of 16 words -* (v) The FIFO is used optimally when used TxFIFOs are allocated in the top -* of the FIFO.Ex: use EP1 and EP2 as IN instead of EP1 and EP3 as IN ones. -* (vi) In HS case 12 FIFO locations should be reserved for internal DMA registers -* so total FIFO size should be 1012 Only instead of 1024 -*******************************************************************************/ - -/****************** USB OTG HS CONFIGURATION **********************************/ -#ifdef USB_OTG_HS_CORE - #define RX_FIFO_HS_SIZE 512 - #define TX0_FIFO_HS_SIZE 128 - #define TX1_FIFO_HS_SIZE 372 - #define TX2_FIFO_HS_SIZE 64 - #define TX3_FIFO_HS_SIZE 0 - #define TX4_FIFO_HS_SIZE 0 - #define TX5_FIFO_HS_SIZE 0 - -// #define USB_OTG_HS_SOF_OUTPUT_ENABLED - - #ifdef USE_ULPI_PHY - #define USB_OTG_ULPI_PHY_ENABLED - #endif - #ifdef USE_EMBEDDED_PHY - #define USB_OTG_EMBEDDED_PHY_ENABLED - /* wakeup is working only when HS core is configured in FS mode */ - #define USB_OTG_HS_LOW_PWR_MGMT_SUPPORT - #endif - /* #define USB_OTG_HS_INTERNAL_DMA_ENABLED */ /* Be aware that enabling DMA mode will result in data being sent only by - multiple of 4 packet sizes. This is due to the fact that USB DMA does - not allow sending data from non word-aligned addresses. - For this specific application, it is advised to not enable this option - unless required. */ - #define USB_OTG_HS_DEDICATED_EP1_ENABLED -#endif - -/****************** USB OTG FS CONFIGURATION **********************************/ -#ifdef USB_OTG_FS_CORE - #define RX_FIFO_FS_SIZE 128 - #define TX0_FIFO_FS_SIZE 32 - #define TX1_FIFO_FS_SIZE 64 - #define TX2_FIFO_FS_SIZE 32 - #define TX3_FIFO_FS_SIZE 64 - -// #define USB_OTG_FS_LOW_PWR_MGMT_SUPPORT -// #define USB_OTG_FS_SOF_OUTPUT_ENABLED -#endif - -/****************** USB OTG MISC CONFIGURATION ********************************/ -#define VBUS_SENSING_ENABLED - -/* BEGIN host specific stuff */ - -/******************************************************************************* -* FIFO Size Configuration in Host mode -* -* (i) Receive data FIFO size = (Largest Packet Size / 4) + 1 or -* 2x (Largest Packet Size / 4) + 1, If a -* high-bandwidth channel or multiple isochronous -* channels are enabled -* -* (ii) For the host nonperiodic Transmit FIFO is the largest maximum packet size -* for all supported nonperiodic OUT channels. Typically, a space -* corresponding to two Largest Packet Size is recommended. -* -* (iii) The minimum amount of RAM required for Host periodic Transmit FIFO is -* the largest maximum packet size for all supported periodic OUT channels. -* If there is at least one High Bandwidth Isochronous OUT endpoint, -* then the space must be at least two times the maximum packet size for -* that channel. -*******************************************************************************/ - -/****************** USB OTG HS CONFIGURATION (for host) ***********************/ -#ifdef USB_OTG_HS_CORE - #define RX_FIFO_HS_SIZE 512 - #define TXH_NP_HS_FIFOSIZ 256 - #define TXH_P_HS_FIFOSIZ 256 - -// #define USB_OTG_HS_LOW_PWR_MGMT_SUPPORT -// #define USB_OTG_HS_SOF_OUTPUT_ENABLED - -// #define USB_OTG_INTERNAL_VBUS_ENABLED -#define USB_OTG_EXTERNAL_VBUS_ENABLED - - #ifdef USE_ULPI_PHY - #define USB_OTG_ULPI_PHY_ENABLED - #endif - #ifdef USE_EMBEDDED_PHY - #define USB_OTG_EMBEDDED_PHY_ENABLED - #endif - #define USB_OTG_HS_INTERNAL_DMA_ENABLED -// #define USB_OTG_HS_DEDICATED_EP1_ENABLED -#endif - -/****************** USB OTG FS CONFIGURATION (for host) ***********************/ -#ifdef USB_OTG_FS_CORE - //#define RX_FIFO_FS_SIZE 128 // already defined for device (and it's the same) - #define TXH_NP_FS_FIFOSIZ 96 - #define TXH_P_FS_FIFOSIZ 96 - -// #define USB_OTG_FS_LOW_PWR_MGMT_SUPPORT -// #define USB_OTG_FS_SOF_OUTPUT_ENABLED -#endif - -/* END host specific stuff */ - -/****************** USB OTG MODE CONFIGURATION ********************************/ -//#define USE_HOST_MODE // set in Makefile -#define USE_DEVICE_MODE -//#define USE_OTG_MODE // set in Makefile - -#ifndef USB_OTG_FS_CORE - #ifndef USB_OTG_HS_CORE - #error "USB_OTG_HS_CORE or USB_OTG_FS_CORE should be defined" - #endif -#endif - -#ifndef USE_DEVICE_MODE - #ifndef USE_HOST_MODE - #error "USE_DEVICE_MODE or USE_HOST_MODE should be defined" - #endif -#endif - -#ifndef USE_USB_OTG_HS - #ifndef USE_USB_OTG_FS - #error "USE_USB_OTG_HS or USE_USB_OTG_FS should be defined" - #endif -#else //USE_USB_OTG_HS - #ifndef USE_ULPI_PHY - #ifndef USE_EMBEDDED_PHY - #error "USE_ULPI_PHY or USE_EMBEDDED_PHY should be defined" - #endif - #endif -#endif - -/****************** C Compilers dependant keywords ****************************/ -/* In HS mode and when the DMA is used, all variables and data structures dealing - with the DMA during the transaction process should be 4-bytes aligned */ -#ifdef USB_OTG_HS_INTERNAL_DMA_ENABLED - #if defined (__GNUC__) /* GNU Compiler */ - #define __ALIGN_END __attribute__ ((aligned (4))) - #define __ALIGN_BEGIN - #else - #define __ALIGN_END - #if defined (__CC_ARM) /* ARM Compiler */ - #define __ALIGN_BEGIN __align(4) - #elif defined (__ICCARM__) /* IAR Compiler */ - #define __ALIGN_BEGIN - #elif defined (__TASKING__) /* TASKING Compiler */ - #define __ALIGN_BEGIN __align(4) - #endif /* __CC_ARM */ - #endif /* __GNUC__ */ -#else - #define __ALIGN_BEGIN - #define __ALIGN_END -#endif /* USB_OTG_HS_INTERNAL_DMA_ENABLED */ - -/* __packed keyword used to decrease the data type alignment to 1-byte */ -#if defined (__CC_ARM) /* ARM Compiler */ - #define __packed __packed -#elif defined (__ICCARM__) /* IAR Compiler */ - #define __packed __packed -#elif defined ( __GNUC__ ) /* GNU Compiler */ - #define __packed __attribute__ ((__packed__)) -#elif defined (__TASKING__) /* TASKING Compiler */ - #define __packed __unaligned -#endif /* __CC_ARM */ - -/** - * @} - */ - - -/** @defgroup USB_CONF_Exported_Types - * @{ - */ -/** - * @} - */ - - -/** @defgroup USB_CONF_Exported_Macros - * @{ - */ -/** - * @} - */ - -/** @defgroup USB_CONF_Exported_Variables - * @{ - */ -/** - * @} - */ - -/** @defgroup USB_CONF_Exported_FunctionsPrototype - * @{ - */ -/** - * @} - */ - - -#endif //__USB_CONF__H__ - - -/** - * @} - */ - -/** - * @} - */ - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ - diff --git a/stm/lib/usb_core.c b/stm/lib/usb_core.c deleted file mode 100644 index 64dd3e4fc..000000000 --- a/stm/lib/usb_core.c +++ /dev/null @@ -1,2162 +0,0 @@ -/** - ****************************************************************************** - * @file usb_core.c - * @author MCD Application Team - * @version V2.1.0 - * @date 19-March-2012 - * @brief USB-OTG Core Layer - ****************************************************************************** - * @attention - * - *

© COPYRIGHT 2012 STMicroelectronics

- * - * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License"); - * You may not use this file except in compliance with the License. - * You may obtain a copy of the License at: - * - * http://www.st.com/software_license_agreement_liberty_v2 - * - * Unless required by applicable law or agreed to in writing, software - * distributed under the License is distributed on an "AS IS" BASIS, - * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - * See the License for the specific language governing permissions and - * limitations under the License. - * - ****************************************************************************** - */ - -/* Includes ------------------------------------------------------------------*/ -#include "usb_core.h" -#include "usb_bsp.h" - - -/** @addtogroup USB_OTG_DRIVER -* @{ -*/ - -/** @defgroup USB_CORE -* @brief This file includes the USB-OTG Core Layer -* @{ -*/ - - -/** @defgroup USB_CORE_Private_Defines -* @{ -*/ - -/** -* @} -*/ - - -/** @defgroup USB_CORE_Private_TypesDefinitions -* @{ -*/ -/** -* @} -*/ - - - -/** @defgroup USB_CORE_Private_Macros -* @{ -*/ -/** -* @} -*/ - - -/** @defgroup USB_CORE_Private_Variables -* @{ -*/ -/** -* @} -*/ - - -/** @defgroup USB_CORE_Private_FunctionPrototypes -* @{ -*/ -/** -* @} -*/ - - -/** @defgroup USB_CORE_Private_Functions -* @{ -*/ - -/** -* @brief USB_OTG_EnableCommonInt -* Initializes the commmon interrupts, used in both device and modes -* @param pdev : Selected device -* @retval None -*/ -static void USB_OTG_EnableCommonInt(USB_OTG_CORE_HANDLE *pdev) -{ - USB_OTG_GINTMSK_TypeDef int_mask; - - int_mask.d32 = 0; - /* Clear any pending USB_OTG Interrupts */ -#ifndef USE_OTG_MODE - USB_OTG_WRITE_REG32( &pdev->regs.GREGS->GOTGINT, 0xFFFFFFFF); -#endif - /* Clear any pending interrupts */ - USB_OTG_WRITE_REG32( &pdev->regs.GREGS->GINTSTS, 0xBFFFFFFF); - /* Enable the interrupts in the INTMSK */ - int_mask.b.wkupintr = 1; - int_mask.b.usbsuspend = 1; - -#ifdef USE_OTG_MODE - int_mask.b.otgintr = 1; - int_mask.b.sessreqintr = 1; - int_mask.b.conidstschng = 1; -#endif - USB_OTG_WRITE_REG32( &pdev->regs.GREGS->GINTMSK, int_mask.d32); -} - -/** -* @brief USB_OTG_CoreReset : Soft reset of the core -* @param pdev : Selected device -* @retval USB_OTG_STS : status -*/ -static USB_OTG_STS USB_OTG_CoreReset(USB_OTG_CORE_HANDLE *pdev) -{ - USB_OTG_STS status = USB_OTG_OK; - __IO USB_OTG_GRSTCTL_TypeDef greset; - uint32_t count = 0; - - greset.d32 = 0; - /* Wait for AHB master IDLE state. */ - do - { - USB_OTG_BSP_uDelay(3); - greset.d32 = USB_OTG_READ_REG32(&pdev->regs.GREGS->GRSTCTL); - if (++count > 200000) - { - return USB_OTG_OK; - } - } - while (greset.b.ahbidle == 0); - /* Core Soft Reset */ - count = 0; - greset.b.csftrst = 1; - USB_OTG_WRITE_REG32(&pdev->regs.GREGS->GRSTCTL, greset.d32 ); - do - { - greset.d32 = USB_OTG_READ_REG32(&pdev->regs.GREGS->GRSTCTL); - if (++count > 200000) - { - break; - } - } - while (greset.b.csftrst == 1); - /* Wait for 3 PHY Clocks*/ - USB_OTG_BSP_uDelay(3); - return status; -} - -/** -* @brief USB_OTG_WritePacket : Writes a packet into the Tx FIFO associated -* with the EP -* @param pdev : Selected device -* @param src : source pointer -* @param ch_ep_num : end point number -* @param bytes : No. of bytes -* @retval USB_OTG_STS : status -*/ -USB_OTG_STS USB_OTG_WritePacket(USB_OTG_CORE_HANDLE *pdev, - uint8_t *src, - uint8_t ch_ep_num, - uint16_t len) -{ - USB_OTG_STS status = USB_OTG_OK; - if (pdev->cfg.dma_enable == 0) - { - uint32_t count32b= 0 , i= 0; - __IO uint32_t *fifo; - - count32b = (len + 3) / 4; - fifo = pdev->regs.DFIFO[ch_ep_num]; - for (i = 0; i < count32b; i++, src+=4) - { - USB_OTG_WRITE_REG32( fifo, *((__packed uint32_t *)src) ); - } - } - return status; -} - - -/** -* @brief USB_OTG_ReadPacket : Reads a packet from the Rx FIFO -* @param pdev : Selected device -* @param dest : Destination Pointer -* @param bytes : No. of bytes -* @retval None -*/ -void *USB_OTG_ReadPacket(USB_OTG_CORE_HANDLE *pdev, - uint8_t *dest, - uint16_t len) -{ - uint32_t i=0; - uint32_t count32b = (len + 3) / 4; - - __IO uint32_t *fifo = pdev->regs.DFIFO[0]; - - for ( i = 0; i < count32b; i++, dest += 4 ) - { - *(__packed uint32_t *)dest = USB_OTG_READ_REG32(fifo); - - } - return ((void *)dest); -} - -/** -* @brief USB_OTG_SelectCore -* Initialize core registers address. -* @param pdev : Selected device -* @param coreID : USB OTG Core ID -* @retval USB_OTG_STS : status -*/ -USB_OTG_STS USB_OTG_SelectCore(USB_OTG_CORE_HANDLE *pdev, - USB_OTG_CORE_ID_TypeDef coreID) -{ - uint32_t i , baseAddress = 0; - USB_OTG_STS status = USB_OTG_OK; - - pdev->cfg.dma_enable = 0; - - /* at startup the core is in FS mode */ - pdev->cfg.speed = USB_OTG_SPEED_FULL; - pdev->cfg.mps = USB_OTG_FS_MAX_PACKET_SIZE ; - - /* initialize device cfg following its address */ - if (coreID == USB_OTG_FS_CORE_ID) - { - baseAddress = USB_OTG_FS_BASE_ADDR; - pdev->cfg.coreID = USB_OTG_FS_CORE_ID; - pdev->cfg.host_channels = 8 ; - pdev->cfg.dev_endpoints = 4 ; - pdev->cfg.TotalFifoSize = 320; /* in 32-bits */ - pdev->cfg.phy_itface = USB_OTG_EMBEDDED_PHY; - -#ifdef USB_OTG_FS_SOF_OUTPUT_ENABLED - pdev->cfg.Sof_output = 1; -#endif - -#ifdef USB_OTG_FS_LOW_PWR_MGMT_SUPPORT - pdev->cfg.low_power = 1; -#endif - } - else if (coreID == USB_OTG_HS_CORE_ID) - { - baseAddress = USB_OTG_HS_BASE_ADDR; - pdev->cfg.coreID = USB_OTG_HS_CORE_ID; - pdev->cfg.host_channels = 12 ; - pdev->cfg.dev_endpoints = 6 ; - pdev->cfg.TotalFifoSize = 1280;/* in 32-bits */ - -#ifdef USB_OTG_ULPI_PHY_ENABLED - pdev->cfg.phy_itface = USB_OTG_ULPI_PHY; -#else -#ifdef USB_OTG_EMBEDDED_PHY_ENABLED - pdev->cfg.phy_itface = USB_OTG_EMBEDDED_PHY; -#endif -#endif - -#ifdef USB_OTG_HS_INTERNAL_DMA_ENABLED - pdev->cfg.dma_enable = 1; -#endif - -#ifdef USB_OTG_HS_SOF_OUTPUT_ENABLED - pdev->cfg.Sof_output = 1; -#endif - -#ifdef USB_OTG_HS_LOW_PWR_MGMT_SUPPORT - pdev->cfg.low_power = 1; -#endif - - } - - pdev->regs.GREGS = (USB_OTG_GREGS *)(baseAddress + \ - USB_OTG_CORE_GLOBAL_REGS_OFFSET); - pdev->regs.DREGS = (USB_OTG_DREGS *) (baseAddress + \ - USB_OTG_DEV_GLOBAL_REG_OFFSET); - - for (i = 0; i < pdev->cfg.dev_endpoints; i++) - { - pdev->regs.INEP_REGS[i] = (USB_OTG_INEPREGS *) \ - (baseAddress + USB_OTG_DEV_IN_EP_REG_OFFSET + \ - (i * USB_OTG_EP_REG_OFFSET)); - pdev->regs.OUTEP_REGS[i] = (USB_OTG_OUTEPREGS *) \ - (baseAddress + USB_OTG_DEV_OUT_EP_REG_OFFSET + \ - (i * USB_OTG_EP_REG_OFFSET)); - } - pdev->regs.HREGS = (USB_OTG_HREGS *)(baseAddress + \ - USB_OTG_HOST_GLOBAL_REG_OFFSET); - pdev->regs.HPRT0 = (uint32_t *)(baseAddress + USB_OTG_HOST_PORT_REGS_OFFSET); - - for (i = 0; i < pdev->cfg.host_channels; i++) - { - pdev->regs.HC_REGS[i] = (USB_OTG_HC_REGS *)(baseAddress + \ - USB_OTG_HOST_CHAN_REGS_OFFSET + \ - (i * USB_OTG_CHAN_REGS_OFFSET)); - } - for (i = 0; i < pdev->cfg.host_channels; i++) - { - pdev->regs.DFIFO[i] = (uint32_t *)(baseAddress + USB_OTG_DATA_FIFO_OFFSET +\ - (i * USB_OTG_DATA_FIFO_SIZE)); - } - pdev->regs.PCGCCTL = (uint32_t *)(baseAddress + USB_OTG_PCGCCTL_OFFSET); - - return status; -} - - -/** -* @brief USB_OTG_CoreInit -* Initializes the USB_OTG controller registers and prepares the core -* device mode or host mode operation. -* @param pdev : Selected device -* @retval USB_OTG_STS : status -*/ -USB_OTG_STS USB_OTG_CoreInit(USB_OTG_CORE_HANDLE *pdev) -{ - USB_OTG_STS status = USB_OTG_OK; - USB_OTG_GUSBCFG_TypeDef usbcfg; - USB_OTG_GCCFG_TypeDef gccfg; - USB_OTG_GAHBCFG_TypeDef ahbcfg; - - usbcfg.d32 = 0; - gccfg.d32 = 0; - ahbcfg.d32 = 0; - - - - if (pdev->cfg.phy_itface == USB_OTG_ULPI_PHY) - { - gccfg.d32 = USB_OTG_READ_REG32(&pdev->regs.GREGS->GCCFG); - gccfg.b.pwdn = 0; - - if (pdev->cfg.Sof_output) - { - gccfg.b.sofouten = 1; - } - USB_OTG_WRITE_REG32 (&pdev->regs.GREGS->GCCFG, gccfg.d32); - - /* Init The ULPI Interface */ - usbcfg.d32 = 0; - usbcfg.d32 = USB_OTG_READ_REG32(&pdev->regs.GREGS->GUSBCFG); - - usbcfg.b.physel = 0; /* HS Interface */ -#ifdef USB_OTG_INTERNAL_VBUS_ENABLED - usbcfg.b.ulpi_ext_vbus_drv = 0; /* Use internal VBUS */ -#else -#ifdef USB_OTG_EXTERNAL_VBUS_ENABLED - usbcfg.b.ulpi_ext_vbus_drv = 1; /* Use external VBUS */ -#endif -#endif - usbcfg.b.term_sel_dl_pulse = 0; /* Data line pulsing using utmi_txvalid */ - - usbcfg.b.ulpi_fsls = 0; - usbcfg.b.ulpi_clk_sus_m = 0; - USB_OTG_WRITE_REG32 (&pdev->regs.GREGS->GUSBCFG, usbcfg.d32); - - /* Reset after a PHY select */ - USB_OTG_CoreReset(pdev); - - if(pdev->cfg.dma_enable == 1) - { - - ahbcfg.b.hburstlen = 5; /* 64 x 32-bits*/ - ahbcfg.b.dmaenable = 1; - USB_OTG_WRITE_REG32(&pdev->regs.GREGS->GAHBCFG, ahbcfg.d32); - - } - } - else /* FS interface (embedded Phy) */ - { - - usbcfg.d32 = USB_OTG_READ_REG32(&pdev->regs.GREGS->GUSBCFG);; - usbcfg.b.physel = 1; /* FS Interface */ - USB_OTG_WRITE_REG32 (&pdev->regs.GREGS->GUSBCFG, usbcfg.d32); - /* Reset after a PHY select and set Host mode */ - USB_OTG_CoreReset(pdev); - /* Deactivate the power down*/ - gccfg.d32 = 0; - gccfg.b.pwdn = 1; - - gccfg.b.vbussensingA = 1 ; - gccfg.b.vbussensingB = 1 ; -#ifndef VBUS_SENSING_ENABLED - gccfg.b.disablevbussensing = 1; -#endif - - if(pdev->cfg.Sof_output) - { - gccfg.b.sofouten = 1; - } - - USB_OTG_WRITE_REG32 (&pdev->regs.GREGS->GCCFG, gccfg.d32); - USB_OTG_BSP_mDelay(20); - } - /* case the HS core is working in FS mode */ - if(pdev->cfg.dma_enable == 1) - { - - ahbcfg.d32 = USB_OTG_READ_REG32(&pdev->regs.GREGS->GAHBCFG); - ahbcfg.b.hburstlen = 5; /* 64 x 32-bits*/ - ahbcfg.b.dmaenable = 1; - USB_OTG_WRITE_REG32(&pdev->regs.GREGS->GAHBCFG, ahbcfg.d32); - - } - /* initialize OTG features */ -#ifdef USE_OTG_MODE - usbcfg.d32 = USB_OTG_READ_REG32(&pdev->regs.GREGS->GUSBCFG); - usbcfg.b.hnpcap = 1; - usbcfg.b.srpcap = 1; - USB_OTG_WRITE_REG32(&pdev->regs.GREGS->GUSBCFG, usbcfg.d32); - USB_OTG_EnableCommonInt(pdev); -#endif - return status; -} -/** -* @brief USB_OTG_EnableGlobalInt -* Enables the controller's Global Int in the AHB Config reg -* @param pdev : Selected device -* @retval USB_OTG_STS : status -*/ -USB_OTG_STS USB_OTG_EnableGlobalInt(USB_OTG_CORE_HANDLE *pdev) -{ - USB_OTG_STS status = USB_OTG_OK; - USB_OTG_GAHBCFG_TypeDef ahbcfg; - - ahbcfg.d32 = 0; - ahbcfg.b.glblintrmsk = 1; /* Enable interrupts */ - USB_OTG_MODIFY_REG32(&pdev->regs.GREGS->GAHBCFG, 0, ahbcfg.d32); - return status; -} - - -/** -* @brief USB_OTG_DisableGlobalInt -* Enables the controller's Global Int in the AHB Config reg -* @param pdev : Selected device -* @retval USB_OTG_STS : status -*/ -USB_OTG_STS USB_OTG_DisableGlobalInt(USB_OTG_CORE_HANDLE *pdev) -{ - USB_OTG_STS status = USB_OTG_OK; - USB_OTG_GAHBCFG_TypeDef ahbcfg; - ahbcfg.d32 = 0; - ahbcfg.b.glblintrmsk = 1; /* Enable interrupts */ - USB_OTG_MODIFY_REG32(&pdev->regs.GREGS->GAHBCFG, ahbcfg.d32, 0); - return status; -} - - -/** -* @brief USB_OTG_FlushTxFifo : Flush a Tx FIFO -* @param pdev : Selected device -* @param num : FO num -* @retval USB_OTG_STS : status -*/ -USB_OTG_STS USB_OTG_FlushTxFifo (USB_OTG_CORE_HANDLE *pdev , uint32_t num ) -{ - USB_OTG_STS status = USB_OTG_OK; - __IO USB_OTG_GRSTCTL_TypeDef greset; - - uint32_t count = 0; - greset.d32 = 0; - greset.b.txfflsh = 1; - greset.b.txfnum = num; - USB_OTG_WRITE_REG32( &pdev->regs.GREGS->GRSTCTL, greset.d32 ); - do - { - greset.d32 = USB_OTG_READ_REG32( &pdev->regs.GREGS->GRSTCTL); - if (++count > 200000) - { - break; - } - } - while (greset.b.txfflsh == 1); - /* Wait for 3 PHY Clocks*/ - USB_OTG_BSP_uDelay(3); - return status; -} - - -/** -* @brief USB_OTG_FlushRxFifo : Flush a Rx FIFO -* @param pdev : Selected device -* @retval USB_OTG_STS : status -*/ -USB_OTG_STS USB_OTG_FlushRxFifo( USB_OTG_CORE_HANDLE *pdev ) -{ - USB_OTG_STS status = USB_OTG_OK; - __IO USB_OTG_GRSTCTL_TypeDef greset; - uint32_t count = 0; - - greset.d32 = 0; - greset.b.rxfflsh = 1; - USB_OTG_WRITE_REG32( &pdev->regs.GREGS->GRSTCTL, greset.d32 ); - do - { - greset.d32 = USB_OTG_READ_REG32( &pdev->regs.GREGS->GRSTCTL); - if (++count > 200000) - { - break; - } - } - while (greset.b.rxfflsh == 1); - /* Wait for 3 PHY Clocks*/ - USB_OTG_BSP_uDelay(3); - return status; -} - - -/** -* @brief USB_OTG_SetCurrentMode : Set ID line -* @param pdev : Selected device -* @param mode : (Host/device) -* @retval USB_OTG_STS : status -*/ -USB_OTG_STS USB_OTG_SetCurrentMode(USB_OTG_CORE_HANDLE *pdev , uint8_t mode) -{ - USB_OTG_STS status = USB_OTG_OK; - USB_OTG_GUSBCFG_TypeDef usbcfg; - - usbcfg.d32 = USB_OTG_READ_REG32(&pdev->regs.GREGS->GUSBCFG); - - usbcfg.b.force_host = 0; - usbcfg.b.force_dev = 0; - - if ( mode == HOST_MODE) - { - usbcfg.b.force_host = 1; - } - else if ( mode == DEVICE_MODE) - { - usbcfg.b.force_dev = 1; - } - - USB_OTG_WRITE_REG32(&pdev->regs.GREGS->GUSBCFG, usbcfg.d32); - USB_OTG_BSP_mDelay(50); - return status; -} - - -/** -* @brief USB_OTG_GetMode : Get current mode -* @param pdev : Selected device -* @retval current mode -*/ -uint32_t USB_OTG_GetMode(USB_OTG_CORE_HANDLE *pdev) -{ - return (USB_OTG_READ_REG32(&pdev->regs.GREGS->GINTSTS ) & 0x1); -} - - -/** -* @brief USB_OTG_IsDeviceMode : Check if it is device mode -* @param pdev : Selected device -* @retval num_in_ep -*/ -uint8_t USB_OTG_IsDeviceMode(USB_OTG_CORE_HANDLE *pdev) -{ - return (USB_OTG_GetMode(pdev) != HOST_MODE); -} - - -/** -* @brief USB_OTG_IsHostMode : Check if it is host mode -* @param pdev : Selected device -* @retval num_in_ep -*/ -uint8_t USB_OTG_IsHostMode(USB_OTG_CORE_HANDLE *pdev) -{ - return (USB_OTG_GetMode(pdev) == HOST_MODE); -} - - -/** -* @brief USB_OTG_ReadCoreItr : returns the Core Interrupt register -* @param pdev : Selected device -* @retval Status -*/ -uint32_t USB_OTG_ReadCoreItr(USB_OTG_CORE_HANDLE *pdev) -{ - uint32_t v = 0; - v = USB_OTG_READ_REG32(&pdev->regs.GREGS->GINTSTS); - v &= USB_OTG_READ_REG32(&pdev->regs.GREGS->GINTMSK); - return v; -} - - -/** -* @brief USB_OTG_ReadOtgItr : returns the USB_OTG Interrupt register -* @param pdev : Selected device -* @retval Status -*/ -uint32_t USB_OTG_ReadOtgItr (USB_OTG_CORE_HANDLE *pdev) -{ - return (USB_OTG_READ_REG32 (&pdev->regs.GREGS->GOTGINT)); -} - -#ifdef USE_HOST_MODE -/** -* @brief USB_OTG_CoreInitHost : Initializes USB_OTG controller for host mode -* @param pdev : Selected device -* @retval status -*/ -USB_OTG_STS USB_OTG_CoreInitHost(USB_OTG_CORE_HANDLE *pdev) -{ - USB_OTG_STS status = USB_OTG_OK; - USB_OTG_FSIZ_TypeDef nptxfifosize; - USB_OTG_FSIZ_TypeDef ptxfifosize; - USB_OTG_HCFG_TypeDef hcfg; - -#ifdef USE_OTG_MODE - USB_OTG_GOTGCTL_TypeDef gotgctl; -#endif - - uint32_t i = 0; - - nptxfifosize.d32 = 0; - ptxfifosize.d32 = 0; -#ifdef USE_OTG_MODE - gotgctl.d32 = 0; -#endif - hcfg.d32 = 0; - - - /* configure charge pump IO */ - USB_OTG_BSP_ConfigVBUS(pdev); - - /* Restart the Phy Clock */ - USB_OTG_WRITE_REG32(pdev->regs.PCGCCTL, 0); - - /* Initialize Host Configuration Register */ - if (pdev->cfg.phy_itface == USB_OTG_ULPI_PHY) - { - USB_OTG_InitFSLSPClkSel(pdev , HCFG_30_60_MHZ); - } - else - { - USB_OTG_InitFSLSPClkSel(pdev , HCFG_48_MHZ); - } - USB_OTG_ResetPort(pdev); - - hcfg.d32 = USB_OTG_READ_REG32(&pdev->regs.HREGS->HCFG); - hcfg.b.fslssupp = 0; - USB_OTG_WRITE_REG32(&pdev->regs.HREGS->HCFG, hcfg.d32); - - /* Configure data FIFO sizes */ - /* Rx FIFO */ -#ifdef USB_OTG_FS_CORE - if(pdev->cfg.coreID == USB_OTG_FS_CORE_ID) - { - /* set Rx FIFO size */ - USB_OTG_WRITE_REG32(&pdev->regs.GREGS->GRXFSIZ, RX_FIFO_FS_SIZE); - nptxfifosize.b.startaddr = RX_FIFO_FS_SIZE; - nptxfifosize.b.depth = TXH_NP_FS_FIFOSIZ; - USB_OTG_WRITE_REG32(&pdev->regs.GREGS->DIEPTXF0_HNPTXFSIZ, nptxfifosize.d32); - - ptxfifosize.b.startaddr = RX_FIFO_FS_SIZE + TXH_NP_FS_FIFOSIZ; - ptxfifosize.b.depth = TXH_P_FS_FIFOSIZ; - USB_OTG_WRITE_REG32(&pdev->regs.GREGS->HPTXFSIZ, ptxfifosize.d32); - } -#endif -#ifdef USB_OTG_HS_CORE - if (pdev->cfg.coreID == USB_OTG_HS_CORE_ID) - { - /* set Rx FIFO size */ - USB_OTG_WRITE_REG32(&pdev->regs.GREGS->GRXFSIZ, RX_FIFO_HS_SIZE); - nptxfifosize.b.startaddr = RX_FIFO_HS_SIZE; - nptxfifosize.b.depth = TXH_NP_HS_FIFOSIZ; - USB_OTG_WRITE_REG32(&pdev->regs.GREGS->DIEPTXF0_HNPTXFSIZ, nptxfifosize.d32); - - ptxfifosize.b.startaddr = RX_FIFO_HS_SIZE + TXH_NP_HS_FIFOSIZ; - ptxfifosize.b.depth = TXH_P_HS_FIFOSIZ; - USB_OTG_WRITE_REG32(&pdev->regs.GREGS->HPTXFSIZ, ptxfifosize.d32); - } -#endif - -#ifdef USE_OTG_MODE - /* Clear Host Set HNP Enable in the USB_OTG Control Register */ - gotgctl.b.hstsethnpen = 1; - USB_OTG_MODIFY_REG32( &pdev->regs.GREGS->GOTGCTL, gotgctl.d32, 0); -#endif - - /* Make sure the FIFOs are flushed. */ - USB_OTG_FlushTxFifo(pdev, 0x10 ); /* all Tx FIFOs */ - USB_OTG_FlushRxFifo(pdev); - - - /* Clear all pending HC Interrupts */ - for (i = 0; i < pdev->cfg.host_channels; i++) - { - USB_OTG_WRITE_REG32( &pdev->regs.HC_REGS[i]->HCINT, 0xFFFFFFFF ); - USB_OTG_WRITE_REG32( &pdev->regs.HC_REGS[i]->HCINTMSK, 0 ); - } -#ifndef USE_OTG_MODE - USB_OTG_DriveVbus(pdev, 1); -#endif - - USB_OTG_EnableHostInt(pdev); - return status; -} - -/** -* @brief USB_OTG_IsEvenFrame -* This function returns the frame number for sof packet -* @param pdev : Selected device -* @retval Frame number -*/ -uint8_t USB_OTG_IsEvenFrame (USB_OTG_CORE_HANDLE *pdev) -{ - return !(USB_OTG_READ_REG32(&pdev->regs.HREGS->HFNUM) & 0x1); -} - -/** -* @brief USB_OTG_DriveVbus : set/reset vbus -* @param pdev : Selected device -* @param state : VBUS state -* @retval None -*/ -void USB_OTG_DriveVbus (USB_OTG_CORE_HANDLE *pdev, uint8_t state) -{ - USB_OTG_HPRT0_TypeDef hprt0; - - hprt0.d32 = 0; - - /* enable disable the external charge pump */ - USB_OTG_BSP_DriveVBUS(pdev, state); - - /* Turn on the Host port power. */ - hprt0.d32 = USB_OTG_ReadHPRT0(pdev); - if ((hprt0.b.prtpwr == 0 ) && (state == 1 )) - { - hprt0.b.prtpwr = 1; - USB_OTG_WRITE_REG32(pdev->regs.HPRT0, hprt0.d32); - } - if ((hprt0.b.prtpwr == 1 ) && (state == 0 )) - { - hprt0.b.prtpwr = 0; - USB_OTG_WRITE_REG32(pdev->regs.HPRT0, hprt0.d32); - } - - USB_OTG_BSP_mDelay(200); -} -/** -* @brief USB_OTG_EnableHostInt: Enables the Host mode interrupts -* @param pdev : Selected device -* @retval USB_OTG_STS : status -*/ -USB_OTG_STS USB_OTG_EnableHostInt(USB_OTG_CORE_HANDLE *pdev) -{ - USB_OTG_STS status = USB_OTG_OK; - USB_OTG_GINTMSK_TypeDef intmsk; - intmsk.d32 = 0; - /* Disable all interrupts. */ - USB_OTG_WRITE_REG32(&pdev->regs.GREGS->GINTMSK, 0); - - /* Clear any pending interrupts. */ - USB_OTG_WRITE_REG32(&pdev->regs.GREGS->GINTSTS, 0xFFFFFFFF); - - /* Enable the common interrupts */ - USB_OTG_EnableCommonInt(pdev); - - if (pdev->cfg.dma_enable == 0) - { - intmsk.b.rxstsqlvl = 1; - } - intmsk.b.portintr = 1; - intmsk.b.hcintr = 1; - intmsk.b.disconnect = 1; - intmsk.b.sofintr = 1; - intmsk.b.incomplisoout = 1; - USB_OTG_MODIFY_REG32(&pdev->regs.GREGS->GINTMSK, intmsk.d32, intmsk.d32); - return status; -} - -/** -* @brief USB_OTG_InitFSLSPClkSel : Initializes the FSLSPClkSel field of the -* HCFG register on the PHY type -* @param pdev : Selected device -* @param freq : clock frequency -* @retval None -*/ -void USB_OTG_InitFSLSPClkSel(USB_OTG_CORE_HANDLE *pdev , uint8_t freq) -{ - USB_OTG_HCFG_TypeDef hcfg; - - hcfg.d32 = USB_OTG_READ_REG32(&pdev->regs.HREGS->HCFG); - hcfg.b.fslspclksel = freq; - USB_OTG_WRITE_REG32(&pdev->regs.HREGS->HCFG, hcfg.d32); -} - - -/** -* @brief USB_OTG_ReadHPRT0 : Reads HPRT0 to modify later -* @param pdev : Selected device -* @retval HPRT0 value -*/ -uint32_t USB_OTG_ReadHPRT0(USB_OTG_CORE_HANDLE *pdev) -{ - USB_OTG_HPRT0_TypeDef hprt0; - - hprt0.d32 = USB_OTG_READ_REG32(pdev->regs.HPRT0); - hprt0.b.prtena = 0; - hprt0.b.prtconndet = 0; - hprt0.b.prtenchng = 0; - hprt0.b.prtovrcurrchng = 0; - return hprt0.d32; -} - - -/** -* @brief USB_OTG_ReadHostAllChannels_intr : Register PCD Callbacks -* @param pdev : Selected device -* @retval Status -*/ -uint32_t USB_OTG_ReadHostAllChannels_intr (USB_OTG_CORE_HANDLE *pdev) -{ - return (USB_OTG_READ_REG32 (&pdev->regs.HREGS->HAINT)); -} - - -/** -* @brief USB_OTG_ResetPort : Reset Host Port -* @param pdev : Selected device -* @retval status -* @note : (1)The application must wait at least 10 ms (+ 10 ms security) -* before clearing the reset bit. -*/ -uint32_t USB_OTG_ResetPort(USB_OTG_CORE_HANDLE *pdev) -{ - USB_OTG_HPRT0_TypeDef hprt0; - - hprt0.d32 = USB_OTG_ReadHPRT0(pdev); - hprt0.b.prtrst = 1; - USB_OTG_WRITE_REG32(pdev->regs.HPRT0, hprt0.d32); - USB_OTG_BSP_mDelay (10); /* See Note #1 */ - hprt0.b.prtrst = 0; - USB_OTG_WRITE_REG32(pdev->regs.HPRT0, hprt0.d32); - USB_OTG_BSP_mDelay (20); - return 1; -} - - -/** -* @brief USB_OTG_HC_Init : Prepares a host channel for transferring packets -* @param pdev : Selected device -* @param hc_num : channel number -* @retval USB_OTG_STS : status -*/ -USB_OTG_STS USB_OTG_HC_Init(USB_OTG_CORE_HANDLE *pdev , uint8_t hc_num) -{ - USB_OTG_STS status = USB_OTG_OK; - uint32_t intr_enable = 0; - USB_OTG_HCINTMSK_TypeDef hcintmsk; - USB_OTG_GINTMSK_TypeDef gintmsk; - USB_OTG_HCCHAR_TypeDef hcchar; - USB_OTG_HCINTn_TypeDef hcint; - - - gintmsk.d32 = 0; - hcintmsk.d32 = 0; - hcchar.d32 = 0; - - /* Clear old interrupt conditions for this host channel. */ - hcint.d32 = 0xFFFFFFFF; - USB_OTG_WRITE_REG32(&pdev->regs.HC_REGS[hc_num]->HCINT, hcint.d32); - - /* Enable channel interrupts required for this transfer. */ - hcintmsk.d32 = 0; - - if (pdev->cfg.dma_enable == 1) - { - hcintmsk.b.ahberr = 1; - } - - switch (pdev->host.hc[hc_num].ep_type) - { - case EP_TYPE_CTRL: - case EP_TYPE_BULK: - hcintmsk.b.xfercompl = 1; - hcintmsk.b.stall = 1; - hcintmsk.b.xacterr = 1; - hcintmsk.b.datatglerr = 1; - hcintmsk.b.nak = 1; - if (pdev->host.hc[hc_num].ep_is_in) - { - hcintmsk.b.bblerr = 1; - } - else - { - hcintmsk.b.nyet = 1; - if (pdev->host.hc[hc_num].do_ping) - { - hcintmsk.b.ack = 1; - } - } - break; - case EP_TYPE_INTR: - hcintmsk.b.xfercompl = 1; - hcintmsk.b.nak = 1; - hcintmsk.b.stall = 1; - hcintmsk.b.xacterr = 1; - hcintmsk.b.datatglerr = 1; - hcintmsk.b.frmovrun = 1; - - if (pdev->host.hc[hc_num].ep_is_in) - { - hcintmsk.b.bblerr = 1; - } - - break; - case EP_TYPE_ISOC: - hcintmsk.b.xfercompl = 1; - hcintmsk.b.frmovrun = 1; - hcintmsk.b.ack = 1; - - if (pdev->host.hc[hc_num].ep_is_in) - { - hcintmsk.b.xacterr = 1; - hcintmsk.b.bblerr = 1; - } - break; - } - - - USB_OTG_WRITE_REG32(&pdev->regs.HC_REGS[hc_num]->HCINTMSK, hcintmsk.d32); - - - /* Enable the top level host channel interrupt. */ - intr_enable = (1 << hc_num); - USB_OTG_MODIFY_REG32(&pdev->regs.HREGS->HAINTMSK, 0, intr_enable); - - /* Make sure host channel interrupts are enabled. */ - gintmsk.b.hcintr = 1; - USB_OTG_MODIFY_REG32(&pdev->regs.GREGS->GINTMSK, 0, gintmsk.d32); - - /* Program the HCCHAR register */ - hcchar.d32 = 0; - hcchar.b.devaddr = pdev->host.hc[hc_num].dev_addr; - hcchar.b.epnum = pdev->host.hc[hc_num].ep_num; - hcchar.b.epdir = pdev->host.hc[hc_num].ep_is_in; - hcchar.b.lspddev = (pdev->host.hc[hc_num].speed == HPRT0_PRTSPD_LOW_SPEED); - hcchar.b.eptype = pdev->host.hc[hc_num].ep_type; - hcchar.b.mps = pdev->host.hc[hc_num].max_packet; - if (pdev->host.hc[hc_num].ep_type == HCCHAR_INTR) - { - hcchar.b.oddfrm = 1; - } - USB_OTG_WRITE_REG32(&pdev->regs.HC_REGS[hc_num]->HCCHAR, hcchar.d32); - return status; -} - - -/** -* @brief USB_OTG_HC_StartXfer : Start transfer -* @param pdev : Selected device -* @param hc_num : channel number -* @retval USB_OTG_STS : status -*/ -USB_OTG_STS USB_OTG_HC_StartXfer(USB_OTG_CORE_HANDLE *pdev , uint8_t hc_num) -{ - USB_OTG_STS status = USB_OTG_OK; - USB_OTG_HCCHAR_TypeDef hcchar; - USB_OTG_HCTSIZn_TypeDef hctsiz; - USB_OTG_HNPTXSTS_TypeDef hnptxsts; - USB_OTG_HPTXSTS_TypeDef hptxsts; - USB_OTG_GINTMSK_TypeDef intmsk; - uint16_t len_words = 0; - - uint16_t num_packets; - uint16_t max_hc_pkt_count; - - max_hc_pkt_count = 256; - hctsiz.d32 = 0; - hcchar.d32 = 0; - intmsk.d32 = 0; - - /* Compute the expected number of packets associated to the transfer */ - if (pdev->host.hc[hc_num].xfer_len > 0) - { - num_packets = (pdev->host.hc[hc_num].xfer_len + \ - pdev->host.hc[hc_num].max_packet - 1) / pdev->host.hc[hc_num].max_packet; - - if (num_packets > max_hc_pkt_count) - { - num_packets = max_hc_pkt_count; - pdev->host.hc[hc_num].xfer_len = num_packets * \ - pdev->host.hc[hc_num].max_packet; - } - } - else - { - num_packets = 1; - } - if (pdev->host.hc[hc_num].ep_is_in) - { - pdev->host.hc[hc_num].xfer_len = num_packets * \ - pdev->host.hc[hc_num].max_packet; - } - /* Initialize the HCTSIZn register */ - hctsiz.b.xfersize = pdev->host.hc[hc_num].xfer_len; - hctsiz.b.pktcnt = num_packets; - hctsiz.b.pid = pdev->host.hc[hc_num].data_pid; - USB_OTG_WRITE_REG32(&pdev->regs.HC_REGS[hc_num]->HCTSIZ, hctsiz.d32); - - if (pdev->cfg.dma_enable == 1) - { - USB_OTG_WRITE_REG32(&pdev->regs.HC_REGS[hc_num]->HCDMA, (unsigned int)pdev->host.hc[hc_num].xfer_buff); - } - - - hcchar.d32 = USB_OTG_READ_REG32(&pdev->regs.HC_REGS[hc_num]->HCCHAR); - hcchar.b.oddfrm = USB_OTG_IsEvenFrame(pdev); - - /* Set host channel enable */ - hcchar.b.chen = 1; - hcchar.b.chdis = 0; - USB_OTG_WRITE_REG32(&pdev->regs.HC_REGS[hc_num]->HCCHAR, hcchar.d32); - - if (pdev->cfg.dma_enable == 0) /* Slave mode */ - { - if((pdev->host.hc[hc_num].ep_is_in == 0) && - (pdev->host.hc[hc_num].xfer_len > 0)) - { - switch(pdev->host.hc[hc_num].ep_type) - { - /* Non periodic transfer */ - case EP_TYPE_CTRL: - case EP_TYPE_BULK: - - hnptxsts.d32 = USB_OTG_READ_REG32(&pdev->regs.GREGS->HNPTXSTS); - len_words = (pdev->host.hc[hc_num].xfer_len + 3) / 4; - - /* check if there is enough space in FIFO space */ - if(len_words > hnptxsts.b.nptxfspcavail) - { - /* need to process data in nptxfempty interrupt */ - intmsk.b.nptxfempty = 1; - USB_OTG_MODIFY_REG32( &pdev->regs.GREGS->GINTMSK, 0, intmsk.d32); - } - - break; - /* Periodic transfer */ - case EP_TYPE_INTR: - case EP_TYPE_ISOC: - hptxsts.d32 = USB_OTG_READ_REG32(&pdev->regs.HREGS->HPTXSTS); - len_words = (pdev->host.hc[hc_num].xfer_len + 3) / 4; - /* check if there is enough space in FIFO space */ - if(len_words > hptxsts.b.ptxfspcavail) /* split the transfer */ - { - /* need to process data in ptxfempty interrupt */ - intmsk.b.ptxfempty = 1; - USB_OTG_MODIFY_REG32( &pdev->regs.GREGS->GINTMSK, 0, intmsk.d32); - } - break; - - default: - break; - } - - /* Write packet into the Tx FIFO. */ - USB_OTG_WritePacket(pdev, - pdev->host.hc[hc_num].xfer_buff , - hc_num, pdev->host.hc[hc_num].xfer_len); - } - } - return status; -} - - -/** -* @brief USB_OTG_HC_Halt : Halt channel -* @param pdev : Selected device -* @param hc_num : channel number -* @retval USB_OTG_STS : status -*/ -USB_OTG_STS USB_OTG_HC_Halt(USB_OTG_CORE_HANDLE *pdev , uint8_t hc_num) -{ - USB_OTG_STS status = USB_OTG_OK; - USB_OTG_HNPTXSTS_TypeDef nptxsts; - USB_OTG_HPTXSTS_TypeDef hptxsts; - USB_OTG_HCCHAR_TypeDef hcchar; - - nptxsts.d32 = 0; - hptxsts.d32 = 0; - hcchar.d32 = USB_OTG_READ_REG32(&pdev->regs.HC_REGS[hc_num]->HCCHAR); - hcchar.b.chen = 1; - hcchar.b.chdis = 1; - - /* Check for space in the request queue to issue the halt. */ - if (hcchar.b.eptype == HCCHAR_CTRL || hcchar.b.eptype == HCCHAR_BULK) - { - nptxsts.d32 = USB_OTG_READ_REG32(&pdev->regs.GREGS->HNPTXSTS); - if (nptxsts.b.nptxqspcavail == 0) - { - hcchar.b.chen = 0; - } - } - else - { - hptxsts.d32 = USB_OTG_READ_REG32(&pdev->regs.HREGS->HPTXSTS); - if (hptxsts.b.ptxqspcavail == 0) - { - hcchar.b.chen = 0; - } - } - USB_OTG_WRITE_REG32(&pdev->regs.HC_REGS[hc_num]->HCCHAR, hcchar.d32); - return status; -} - -/** -* @brief Issue a ping token -* @param None -* @retval : None -*/ -USB_OTG_STS USB_OTG_HC_DoPing(USB_OTG_CORE_HANDLE *pdev , uint8_t hc_num) -{ - USB_OTG_STS status = USB_OTG_OK; - USB_OTG_HCCHAR_TypeDef hcchar; - USB_OTG_HCTSIZn_TypeDef hctsiz; - - hctsiz.d32 = 0; - hctsiz.b.dopng = 1; - hctsiz.b.pktcnt = 1; - USB_OTG_WRITE_REG32(&pdev->regs.HC_REGS[hc_num]->HCTSIZ, hctsiz.d32); - - hcchar.d32 = USB_OTG_READ_REG32(&pdev->regs.HC_REGS[hc_num]->HCCHAR); - hcchar.b.chen = 1; - hcchar.b.chdis = 0; - USB_OTG_WRITE_REG32(&pdev->regs.HC_REGS[hc_num]->HCCHAR, hcchar.d32); - return status; -} - -/** -* @brief Stop the device and clean up fifo's -* @param None -* @retval : None -*/ -void USB_OTG_StopHost(USB_OTG_CORE_HANDLE *pdev) -{ - USB_OTG_HCCHAR_TypeDef hcchar; - uint32_t i; - - USB_OTG_WRITE_REG32(&pdev->regs.HREGS->HAINTMSK , 0); - USB_OTG_WRITE_REG32(&pdev->regs.HREGS->HAINT, 0xFFFFFFFF); - /* Flush out any leftover queued requests. */ - - for (i = 0; i < pdev->cfg.host_channels; i++) - { - hcchar.d32 = USB_OTG_READ_REG32(&pdev->regs.HC_REGS[i]->HCCHAR); - hcchar.b.chen = 0; - hcchar.b.chdis = 1; - hcchar.b.epdir = 0; - USB_OTG_WRITE_REG32(&pdev->regs.HC_REGS[i]->HCCHAR, hcchar.d32); - } - - /* Flush the FIFO */ - USB_OTG_FlushRxFifo(pdev); - USB_OTG_FlushTxFifo(pdev , 0x10 ); -} -#endif -#ifdef USE_DEVICE_MODE -/* PCD Core Layer */ - -/** -* @brief USB_OTG_InitDevSpeed :Initializes the DevSpd field of DCFG register -* depending the PHY type and the enumeration speed of the device. -* @param pdev : Selected device -* @retval : None -*/ -void USB_OTG_InitDevSpeed(USB_OTG_CORE_HANDLE *pdev , uint8_t speed) -{ - USB_OTG_DCFG_TypeDef dcfg; - - dcfg.d32 = USB_OTG_READ_REG32(&pdev->regs.DREGS->DCFG); - dcfg.b.devspd = speed; - USB_OTG_WRITE_REG32(&pdev->regs.DREGS->DCFG, dcfg.d32); -} - - -/** -* @brief USB_OTG_CoreInitDev : Initializes the USB_OTG controller registers -* for device mode -* @param pdev : Selected device -* @retval USB_OTG_STS : status -*/ -USB_OTG_STS USB_OTG_CoreInitDev (USB_OTG_CORE_HANDLE *pdev) -{ - USB_OTG_STS status = USB_OTG_OK; - USB_OTG_DEPCTL_TypeDef depctl; - uint32_t i; - USB_OTG_DCFG_TypeDef dcfg; - USB_OTG_FSIZ_TypeDef nptxfifosize; - USB_OTG_FSIZ_TypeDef txfifosize; - USB_OTG_DIEPMSK_TypeDef msk; - USB_OTG_DTHRCTL_TypeDef dthrctl; - - depctl.d32 = 0; - dcfg.d32 = 0; - nptxfifosize.d32 = 0; - txfifosize.d32 = 0; - msk.d32 = 0; - - /* Restart the Phy Clock */ - USB_OTG_WRITE_REG32(pdev->regs.PCGCCTL, 0); - /* Device configuration register */ - dcfg.d32 = USB_OTG_READ_REG32( &pdev->regs.DREGS->DCFG); - dcfg.b.perfrint = DCFG_FRAME_INTERVAL_80; - USB_OTG_WRITE_REG32( &pdev->regs.DREGS->DCFG, dcfg.d32 ); - -#ifdef USB_OTG_FS_CORE - if(pdev->cfg.coreID == USB_OTG_FS_CORE_ID ) - { - - /* Set Full speed phy */ - USB_OTG_InitDevSpeed (pdev , USB_OTG_SPEED_PARAM_FULL); - - /* set Rx FIFO size */ - USB_OTG_WRITE_REG32(&pdev->regs.GREGS->GRXFSIZ, RX_FIFO_FS_SIZE); - - /* EP0 TX*/ - nptxfifosize.b.depth = TX0_FIFO_FS_SIZE; - nptxfifosize.b.startaddr = RX_FIFO_FS_SIZE; - USB_OTG_WRITE_REG32( &pdev->regs.GREGS->DIEPTXF0_HNPTXFSIZ, nptxfifosize.d32 ); - - - /* EP1 TX*/ - txfifosize.b.startaddr = nptxfifosize.b.startaddr + nptxfifosize.b.depth; - txfifosize.b.depth = TX1_FIFO_FS_SIZE; - USB_OTG_WRITE_REG32( &pdev->regs.GREGS->DIEPTXF[0], txfifosize.d32 ); - - - /* EP2 TX*/ - txfifosize.b.startaddr += txfifosize.b.depth; - txfifosize.b.depth = TX2_FIFO_FS_SIZE; - USB_OTG_WRITE_REG32( &pdev->regs.GREGS->DIEPTXF[1], txfifosize.d32 ); - - - /* EP3 TX*/ - txfifosize.b.startaddr += txfifosize.b.depth; - txfifosize.b.depth = TX3_FIFO_FS_SIZE; - USB_OTG_WRITE_REG32( &pdev->regs.GREGS->DIEPTXF[2], txfifosize.d32 ); - } -#endif -#ifdef USB_OTG_HS_CORE - if(pdev->cfg.coreID == USB_OTG_HS_CORE_ID ) - { - - /* Set High speed phy */ - - if(pdev->cfg.phy_itface == USB_OTG_ULPI_PHY) - { - USB_OTG_InitDevSpeed (pdev , USB_OTG_SPEED_PARAM_HIGH); - } - else /* set High speed phy in Full speed mode */ - { - USB_OTG_InitDevSpeed (pdev , USB_OTG_SPEED_PARAM_HIGH_IN_FULL); - } - - /* set Rx FIFO size */ - USB_OTG_WRITE_REG32(&pdev->regs.GREGS->GRXFSIZ, RX_FIFO_HS_SIZE); - - /* EP0 TX*/ - nptxfifosize.b.depth = TX0_FIFO_HS_SIZE; - nptxfifosize.b.startaddr = RX_FIFO_HS_SIZE; - USB_OTG_WRITE_REG32( &pdev->regs.GREGS->DIEPTXF0_HNPTXFSIZ, nptxfifosize.d32 ); - - - /* EP1 TX*/ - txfifosize.b.startaddr = nptxfifosize.b.startaddr + nptxfifosize.b.depth; - txfifosize.b.depth = TX1_FIFO_HS_SIZE; - USB_OTG_WRITE_REG32( &pdev->regs.GREGS->DIEPTXF[0], txfifosize.d32 ); - - - /* EP2 TX*/ - txfifosize.b.startaddr += txfifosize.b.depth; - txfifosize.b.depth = TX2_FIFO_HS_SIZE; - USB_OTG_WRITE_REG32( &pdev->regs.GREGS->DIEPTXF[1], txfifosize.d32 ); - - - /* EP3 TX*/ - txfifosize.b.startaddr += txfifosize.b.depth; - txfifosize.b.depth = TX3_FIFO_HS_SIZE; - USB_OTG_WRITE_REG32( &pdev->regs.GREGS->DIEPTXF[2], txfifosize.d32 ); - - /* EP4 TX*/ - txfifosize.b.startaddr += txfifosize.b.depth; - txfifosize.b.depth = TX4_FIFO_HS_SIZE; - USB_OTG_WRITE_REG32( &pdev->regs.GREGS->DIEPTXF[3], txfifosize.d32 ); - - - /* EP5 TX*/ - txfifosize.b.startaddr += txfifosize.b.depth; - txfifosize.b.depth = TX5_FIFO_HS_SIZE; - USB_OTG_WRITE_REG32( &pdev->regs.GREGS->DIEPTXF[4], txfifosize.d32 ); - } -#endif - /* Flush the FIFOs */ - USB_OTG_FlushTxFifo(pdev , 0x10); /* all Tx FIFOs */ - USB_OTG_FlushRxFifo(pdev); - /* Clear all pending Device Interrupts */ - USB_OTG_WRITE_REG32( &pdev->regs.DREGS->DIEPMSK, 0 ); - USB_OTG_WRITE_REG32( &pdev->regs.DREGS->DOEPMSK, 0 ); - USB_OTG_WRITE_REG32( &pdev->regs.DREGS->DAINT, 0xFFFFFFFF ); - USB_OTG_WRITE_REG32( &pdev->regs.DREGS->DAINTMSK, 0 ); - - for (i = 0; i < pdev->cfg.dev_endpoints; i++) - { - depctl.d32 = USB_OTG_READ_REG32(&pdev->regs.INEP_REGS[i]->DIEPCTL); - if (depctl.b.epena) - { - depctl.d32 = 0; - depctl.b.epdis = 1; - depctl.b.snak = 1; - } - else - { - depctl.d32 = 0; - } - USB_OTG_WRITE_REG32( &pdev->regs.INEP_REGS[i]->DIEPCTL, depctl.d32); - USB_OTG_WRITE_REG32( &pdev->regs.INEP_REGS[i]->DIEPTSIZ, 0); - USB_OTG_WRITE_REG32( &pdev->regs.INEP_REGS[i]->DIEPINT, 0xFF); - } - for (i = 0; i < pdev->cfg.dev_endpoints; i++) - { - USB_OTG_DEPCTL_TypeDef depctl; - depctl.d32 = USB_OTG_READ_REG32(&pdev->regs.OUTEP_REGS[i]->DOEPCTL); - if (depctl.b.epena) - { - depctl.d32 = 0; - depctl.b.epdis = 1; - depctl.b.snak = 1; - } - else - { - depctl.d32 = 0; - } - USB_OTG_WRITE_REG32( &pdev->regs.OUTEP_REGS[i]->DOEPCTL, depctl.d32); - USB_OTG_WRITE_REG32( &pdev->regs.OUTEP_REGS[i]->DOEPTSIZ, 0); - USB_OTG_WRITE_REG32( &pdev->regs.OUTEP_REGS[i]->DOEPINT, 0xFF); - } - msk.d32 = 0; - msk.b.txfifoundrn = 1; - USB_OTG_MODIFY_REG32(&pdev->regs.DREGS->DIEPMSK, msk.d32, msk.d32); - - if (pdev->cfg.dma_enable == 1) - { - dthrctl.d32 = 0; - dthrctl.b.non_iso_thr_en = 1; - dthrctl.b.iso_thr_en = 1; - dthrctl.b.tx_thr_len = 64; - dthrctl.b.rx_thr_en = 1; - dthrctl.b.rx_thr_len = 64; - USB_OTG_WRITE_REG32(&pdev->regs.DREGS->DTHRCTL, dthrctl.d32); - } - USB_OTG_EnableDevInt(pdev); - return status; -} - - -/** -* @brief USB_OTG_EnableDevInt : Enables the Device mode interrupts -* @param pdev : Selected device -* @retval USB_OTG_STS : status -*/ -USB_OTG_STS USB_OTG_EnableDevInt(USB_OTG_CORE_HANDLE *pdev) -{ - USB_OTG_STS status = USB_OTG_OK; - USB_OTG_GINTMSK_TypeDef intmsk; - - intmsk.d32 = 0; - - /* Disable all interrupts. */ - USB_OTG_WRITE_REG32( &pdev->regs.GREGS->GINTMSK, 0); - /* Clear any pending interrupts */ - USB_OTG_WRITE_REG32( &pdev->regs.GREGS->GINTSTS, 0xBFFFFFFF); - /* Enable the common interrupts */ - USB_OTG_EnableCommonInt(pdev); - - if (pdev->cfg.dma_enable == 0) - { - intmsk.b.rxstsqlvl = 1; - } - - /* Enable interrupts matching to the Device mode ONLY */ - intmsk.b.usbsuspend = 1; - intmsk.b.usbreset = 1; - intmsk.b.enumdone = 1; - intmsk.b.inepintr = 1; - intmsk.b.outepintr = 1; - intmsk.b.sofintr = 1; - - intmsk.b.incomplisoin = 1; - intmsk.b.incomplisoout = 1; -#ifdef VBUS_SENSING_ENABLED - intmsk.b.sessreqintr = 1; - intmsk.b.otgintr = 1; -#endif - USB_OTG_MODIFY_REG32( &pdev->regs.GREGS->GINTMSK, intmsk.d32, intmsk.d32); - return status; -} - - -/** -* @brief USB_OTG_GetDeviceSpeed -* Get the device speed from the device status register -* @param None -* @retval status -*/ -enum USB_OTG_SPEED USB_OTG_GetDeviceSpeed (USB_OTG_CORE_HANDLE *pdev) -{ - USB_OTG_DSTS_TypeDef dsts; - enum USB_OTG_SPEED speed = USB_SPEED_UNKNOWN; - - - dsts.d32 = USB_OTG_READ_REG32(&pdev->regs.DREGS->DSTS); - - switch (dsts.b.enumspd) - { - case DSTS_ENUMSPD_HS_PHY_30MHZ_OR_60MHZ: - speed = USB_SPEED_HIGH; - break; - case DSTS_ENUMSPD_FS_PHY_30MHZ_OR_60MHZ: - case DSTS_ENUMSPD_FS_PHY_48MHZ: - speed = USB_SPEED_FULL; - break; - - case DSTS_ENUMSPD_LS_PHY_6MHZ: - speed = USB_SPEED_LOW; - break; - } - - return speed; -} -/** -* @brief enables EP0 OUT to receive SETUP packets and configures EP0 -* for transmitting packets -* @param None -* @retval USB_OTG_STS : status -*/ -USB_OTG_STS USB_OTG_EP0Activate(USB_OTG_CORE_HANDLE *pdev) -{ - USB_OTG_STS status = USB_OTG_OK; - USB_OTG_DSTS_TypeDef dsts; - USB_OTG_DEPCTL_TypeDef diepctl; - USB_OTG_DCTL_TypeDef dctl; - - dctl.d32 = 0; - /* Read the Device Status and Endpoint 0 Control registers */ - dsts.d32 = USB_OTG_READ_REG32(&pdev->regs.DREGS->DSTS); - diepctl.d32 = USB_OTG_READ_REG32(&pdev->regs.INEP_REGS[0]->DIEPCTL); - /* Set the MPS of the IN EP based on the enumeration speed */ - switch (dsts.b.enumspd) - { - case DSTS_ENUMSPD_HS_PHY_30MHZ_OR_60MHZ: - case DSTS_ENUMSPD_FS_PHY_30MHZ_OR_60MHZ: - case DSTS_ENUMSPD_FS_PHY_48MHZ: - diepctl.b.mps = DEP0CTL_MPS_64; - break; - case DSTS_ENUMSPD_LS_PHY_6MHZ: - diepctl.b.mps = DEP0CTL_MPS_8; - break; - } - USB_OTG_WRITE_REG32(&pdev->regs.INEP_REGS[0]->DIEPCTL, diepctl.d32); - dctl.b.cgnpinnak = 1; - USB_OTG_MODIFY_REG32(&pdev->regs.DREGS->DCTL, dctl.d32, dctl.d32); - return status; -} - - -/** -* @brief USB_OTG_EPActivate : Activates an EP -* @param pdev : Selected device -* @retval USB_OTG_STS : status -*/ -USB_OTG_STS USB_OTG_EPActivate(USB_OTG_CORE_HANDLE *pdev , USB_OTG_EP *ep) -{ - USB_OTG_STS status = USB_OTG_OK; - USB_OTG_DEPCTL_TypeDef depctl; - USB_OTG_DAINT_TypeDef daintmsk; - __IO uint32_t *addr; - - - depctl.d32 = 0; - daintmsk.d32 = 0; - /* Read DEPCTLn register */ - if (ep->is_in == 1) - { - addr = &pdev->regs.INEP_REGS[ep->num]->DIEPCTL; - daintmsk.ep.in = 1 << ep->num; - } - else - { - addr = &pdev->regs.OUTEP_REGS[ep->num]->DOEPCTL; - daintmsk.ep.out = 1 << ep->num; - } - /* If the EP is already active don't change the EP Control - * register. */ - depctl.d32 = USB_OTG_READ_REG32(addr); - if (!depctl.b.usbactep) - { - depctl.b.mps = ep->maxpacket; - depctl.b.eptype = ep->type; - depctl.b.txfnum = ep->tx_fifo_num; - depctl.b.setd0pid = 1; - depctl.b.usbactep = 1; - USB_OTG_WRITE_REG32(addr, depctl.d32); - } - /* Enable the Interrupt for this EP */ -#ifdef USB_OTG_HS_DEDICATED_EP1_ENABLED - if((ep->num == 1)&&(pdev->cfg.coreID == USB_OTG_HS_CORE_ID)) - { - USB_OTG_MODIFY_REG32(&pdev->regs.DREGS->DEACHMSK, 0, daintmsk.d32); - } - else -#endif - USB_OTG_MODIFY_REG32(&pdev->regs.DREGS->DAINTMSK, 0, daintmsk.d32); - return status; -} - - -/** -* @brief USB_OTG_EPDeactivate : Deactivates an EP -* @param pdev : Selected device -* @retval USB_OTG_STS : status -*/ -USB_OTG_STS USB_OTG_EPDeactivate(USB_OTG_CORE_HANDLE *pdev , USB_OTG_EP *ep) -{ - USB_OTG_STS status = USB_OTG_OK; - USB_OTG_DEPCTL_TypeDef depctl; - USB_OTG_DAINT_TypeDef daintmsk; - __IO uint32_t *addr; - - depctl.d32 = 0; - daintmsk.d32 = 0; - /* Read DEPCTLn register */ - if (ep->is_in == 1) - { - addr = &pdev->regs.INEP_REGS[ep->num]->DIEPCTL; - daintmsk.ep.in = 1 << ep->num; - } - else - { - addr = &pdev->regs.OUTEP_REGS[ep->num]->DOEPCTL; - daintmsk.ep.out = 1 << ep->num; - } - depctl.b.usbactep = 0; - USB_OTG_WRITE_REG32(addr, depctl.d32); - /* Disable the Interrupt for this EP */ - -#ifdef USB_OTG_HS_DEDICATED_EP1_ENABLED - if((ep->num == 1)&&(pdev->cfg.coreID == USB_OTG_HS_CORE_ID)) - { - USB_OTG_MODIFY_REG32(&pdev->regs.DREGS->DEACHMSK, daintmsk.d32, 0); - } - else -#endif - USB_OTG_MODIFY_REG32(&pdev->regs.DREGS->DAINTMSK, daintmsk.d32, 0); - return status; -} - - -/** -* @brief USB_OTG_EPStartXfer : Handle the setup for data xfer for an EP and -* starts the xfer -* @param pdev : Selected device -* @retval USB_OTG_STS : status -*/ -USB_OTG_STS USB_OTG_EPStartXfer(USB_OTG_CORE_HANDLE *pdev , USB_OTG_EP *ep) -{ - USB_OTG_STS status = USB_OTG_OK; - USB_OTG_DEPCTL_TypeDef depctl; - USB_OTG_DEPXFRSIZ_TypeDef deptsiz; - USB_OTG_DSTS_TypeDef dsts; - uint32_t fifoemptymsk = 0; - - depctl.d32 = 0; - deptsiz.d32 = 0; - /* IN endpoint */ - if (ep->is_in == 1) - { - depctl.d32 = USB_OTG_READ_REG32(&(pdev->regs.INEP_REGS[ep->num]->DIEPCTL)); - deptsiz.d32 = USB_OTG_READ_REG32(&(pdev->regs.INEP_REGS[ep->num]->DIEPTSIZ)); - /* Zero Length Packet? */ - if (ep->xfer_len == 0) - { - deptsiz.b.xfersize = 0; - deptsiz.b.pktcnt = 1; - } - else - { - /* Program the transfer size and packet count - * as follows: xfersize = N * maxpacket + - * short_packet pktcnt = N + (short_packet - * exist ? 1 : 0) - */ - deptsiz.b.xfersize = ep->xfer_len; - deptsiz.b.pktcnt = (ep->xfer_len - 1 + ep->maxpacket) / ep->maxpacket; - - if (ep->type == EP_TYPE_ISOC) - { - deptsiz.b.mc = 1; - } - } - USB_OTG_WRITE_REG32(&pdev->regs.INEP_REGS[ep->num]->DIEPTSIZ, deptsiz.d32); - - if (pdev->cfg.dma_enable == 1) - { - USB_OTG_WRITE_REG32(&pdev->regs.INEP_REGS[ep->num]->DIEPDMA, ep->dma_addr); - } - else - { - if (ep->type != EP_TYPE_ISOC) - { - /* Enable the Tx FIFO Empty Interrupt for this EP */ - if (ep->xfer_len > 0) - { - fifoemptymsk = 1 << ep->num; - USB_OTG_MODIFY_REG32(&pdev->regs.DREGS->DIEPEMPMSK, 0, fifoemptymsk); - } - } - } - - - if (ep->type == EP_TYPE_ISOC) - { - dsts.d32 = USB_OTG_READ_REG32(&pdev->regs.DREGS->DSTS); - - if (((dsts.b.soffn)&0x1) == 0) - { - depctl.b.setd1pid = 1; - } - else - { - depctl.b.setd0pid = 1; - } - } - - /* EP enable, IN data in FIFO */ - depctl.b.cnak = 1; - depctl.b.epena = 1; - USB_OTG_WRITE_REG32(&pdev->regs.INEP_REGS[ep->num]->DIEPCTL, depctl.d32); - - if (ep->type == EP_TYPE_ISOC) - { - USB_OTG_WritePacket(pdev, ep->xfer_buff, ep->num, ep->xfer_len); - } - } - else - { - /* OUT endpoint */ - depctl.d32 = USB_OTG_READ_REG32(&(pdev->regs.OUTEP_REGS[ep->num]->DOEPCTL)); - deptsiz.d32 = USB_OTG_READ_REG32(&(pdev->regs.OUTEP_REGS[ep->num]->DOEPTSIZ)); - /* Program the transfer size and packet count as follows: - * pktcnt = N - * xfersize = N * maxpacket - */ - if (ep->xfer_len == 0) - { - deptsiz.b.xfersize = ep->maxpacket; - deptsiz.b.pktcnt = 1; - } - else - { - deptsiz.b.pktcnt = (ep->xfer_len + (ep->maxpacket - 1)) / ep->maxpacket; - deptsiz.b.xfersize = deptsiz.b.pktcnt * ep->maxpacket; - } - USB_OTG_WRITE_REG32(&pdev->regs.OUTEP_REGS[ep->num]->DOEPTSIZ, deptsiz.d32); - - if (pdev->cfg.dma_enable == 1) - { - USB_OTG_WRITE_REG32(&pdev->regs.OUTEP_REGS[ep->num]->DOEPDMA, ep->dma_addr); - } - - if (ep->type == EP_TYPE_ISOC) - { - if (ep->even_odd_frame) - { - depctl.b.setd1pid = 1; - } - else - { - depctl.b.setd0pid = 1; - } - } - /* EP enable */ - depctl.b.cnak = 1; - depctl.b.epena = 1; - USB_OTG_WRITE_REG32(&pdev->regs.OUTEP_REGS[ep->num]->DOEPCTL, depctl.d32); - } - return status; -} - - -/** -* @brief USB_OTG_EP0StartXfer : Handle the setup for a data xfer for EP0 and -* starts the xfer -* @param pdev : Selected device -* @retval USB_OTG_STS : status -*/ -USB_OTG_STS USB_OTG_EP0StartXfer(USB_OTG_CORE_HANDLE *pdev , USB_OTG_EP *ep) -{ - USB_OTG_STS status = USB_OTG_OK; - USB_OTG_DEPCTL_TypeDef depctl; - USB_OTG_DEP0XFRSIZ_TypeDef deptsiz; - USB_OTG_INEPREGS *in_regs; - uint32_t fifoemptymsk = 0; - - depctl.d32 = 0; - deptsiz.d32 = 0; - /* IN endpoint */ - if (ep->is_in == 1) - { - in_regs = pdev->regs.INEP_REGS[0]; - depctl.d32 = USB_OTG_READ_REG32(&in_regs->DIEPCTL); - deptsiz.d32 = USB_OTG_READ_REG32(&in_regs->DIEPTSIZ); - /* Zero Length Packet? */ - if (ep->xfer_len == 0) - { - deptsiz.b.xfersize = 0; - deptsiz.b.pktcnt = 1; - - } - else - { - if (ep->xfer_len > ep->maxpacket) - { - ep->xfer_len = ep->maxpacket; - deptsiz.b.xfersize = ep->maxpacket; - } - else - { - deptsiz.b.xfersize = ep->xfer_len; - } - deptsiz.b.pktcnt = 1; - } - USB_OTG_WRITE_REG32(&in_regs->DIEPTSIZ, deptsiz.d32); - - if (pdev->cfg.dma_enable == 1) - { - USB_OTG_WRITE_REG32(&pdev->regs.INEP_REGS[ep->num]->DIEPDMA, ep->dma_addr); - } - - /* EP enable, IN data in FIFO */ - depctl.b.cnak = 1; - depctl.b.epena = 1; - USB_OTG_WRITE_REG32(&in_regs->DIEPCTL, depctl.d32); - - - - if (pdev->cfg.dma_enable == 0) - { - /* Enable the Tx FIFO Empty Interrupt for this EP */ - if (ep->xfer_len > 0) - { - { - fifoemptymsk |= 1 << ep->num; - USB_OTG_MODIFY_REG32(&pdev->regs.DREGS->DIEPEMPMSK, 0, fifoemptymsk); - } - } - } - } - else - { - /* OUT endpoint */ - depctl.d32 = USB_OTG_READ_REG32(&pdev->regs.OUTEP_REGS[ep->num]->DOEPCTL); - deptsiz.d32 = USB_OTG_READ_REG32(&pdev->regs.OUTEP_REGS[ep->num]->DOEPTSIZ); - /* Program the transfer size and packet count as follows: - * xfersize = N * (maxpacket + 4 - (maxpacket % 4)) - * pktcnt = N */ - if (ep->xfer_len == 0) - { - deptsiz.b.xfersize = ep->maxpacket; - deptsiz.b.pktcnt = 1; - } - else - { - ep->xfer_len = ep->maxpacket; - deptsiz.b.xfersize = ep->maxpacket; - deptsiz.b.pktcnt = 1; - } - USB_OTG_WRITE_REG32(&pdev->regs.OUTEP_REGS[ep->num]->DOEPTSIZ, deptsiz.d32); - if (pdev->cfg.dma_enable == 1) - { - USB_OTG_WRITE_REG32(&pdev->regs.OUTEP_REGS[ep->num]->DOEPDMA, ep->dma_addr); - } - /* EP enable */ - depctl.b.cnak = 1; - depctl.b.epena = 1; - USB_OTG_WRITE_REG32 (&(pdev->regs.OUTEP_REGS[ep->num]->DOEPCTL), depctl.d32); - - } - return status; -} - - -/** -* @brief USB_OTG_EPSetStall : Set the EP STALL -* @param pdev : Selected device -* @retval USB_OTG_STS : status -*/ -USB_OTG_STS USB_OTG_EPSetStall(USB_OTG_CORE_HANDLE *pdev , USB_OTG_EP *ep) -{ - USB_OTG_STS status = USB_OTG_OK; - USB_OTG_DEPCTL_TypeDef depctl; - __IO uint32_t *depctl_addr; - - depctl.d32 = 0; - if (ep->is_in == 1) - { - depctl_addr = &(pdev->regs.INEP_REGS[ep->num]->DIEPCTL); - depctl.d32 = USB_OTG_READ_REG32(depctl_addr); - /* set the disable and stall bits */ - if (depctl.b.epena) - { - depctl.b.epdis = 1; - } - depctl.b.stall = 1; - USB_OTG_WRITE_REG32(depctl_addr, depctl.d32); - } - else - { - depctl_addr = &(pdev->regs.OUTEP_REGS[ep->num]->DOEPCTL); - depctl.d32 = USB_OTG_READ_REG32(depctl_addr); - /* set the stall bit */ - depctl.b.stall = 1; - USB_OTG_WRITE_REG32(depctl_addr, depctl.d32); - } - return status; -} - - -/** -* @brief Clear the EP STALL -* @param pdev : Selected device -* @retval USB_OTG_STS : status -*/ -USB_OTG_STS USB_OTG_EPClearStall(USB_OTG_CORE_HANDLE *pdev , USB_OTG_EP *ep) -{ - USB_OTG_STS status = USB_OTG_OK; - USB_OTG_DEPCTL_TypeDef depctl; - __IO uint32_t *depctl_addr; - - depctl.d32 = 0; - - if (ep->is_in == 1) - { - depctl_addr = &(pdev->regs.INEP_REGS[ep->num]->DIEPCTL); - } - else - { - depctl_addr = &(pdev->regs.OUTEP_REGS[ep->num]->DOEPCTL); - } - depctl.d32 = USB_OTG_READ_REG32(depctl_addr); - /* clear the stall bits */ - depctl.b.stall = 0; - if (ep->type == EP_TYPE_INTR || ep->type == EP_TYPE_BULK) - { - depctl.b.setd0pid = 1; /* DATA0 */ - } - USB_OTG_WRITE_REG32(depctl_addr, depctl.d32); - return status; -} - - -/** -* @brief USB_OTG_ReadDevAllOutEp_itr : returns OUT endpoint interrupt bits -* @param pdev : Selected device -* @retval OUT endpoint interrupt bits -*/ -uint32_t USB_OTG_ReadDevAllOutEp_itr(USB_OTG_CORE_HANDLE *pdev) -{ - uint32_t v; - v = USB_OTG_READ_REG32(&pdev->regs.DREGS->DAINT); - v &= USB_OTG_READ_REG32(&pdev->regs.DREGS->DAINTMSK); - return ((v & 0xffff0000) >> 16); -} - - -/** -* @brief USB_OTG_ReadDevOutEP_itr : returns Device OUT EP Interrupt register -* @param pdev : Selected device -* @param ep : end point number -* @retval Device OUT EP Interrupt register -*/ -uint32_t USB_OTG_ReadDevOutEP_itr(USB_OTG_CORE_HANDLE *pdev , uint8_t epnum) -{ - uint32_t v; - v = USB_OTG_READ_REG32(&pdev->regs.OUTEP_REGS[epnum]->DOEPINT); - v &= USB_OTG_READ_REG32(&pdev->regs.DREGS->DOEPMSK); - return v; -} - - -/** -* @brief USB_OTG_ReadDevAllInEPItr : Get int status register -* @param pdev : Selected device -* @retval int status register -*/ -uint32_t USB_OTG_ReadDevAllInEPItr(USB_OTG_CORE_HANDLE *pdev) -{ - uint32_t v; - v = USB_OTG_READ_REG32(&pdev->regs.DREGS->DAINT); - v &= USB_OTG_READ_REG32(&pdev->regs.DREGS->DAINTMSK); - return (v & 0xffff); -} - -/** -* @brief configures EPO to receive SETUP packets -* @param None -* @retval : None -*/ -void USB_OTG_EP0_OutStart(USB_OTG_CORE_HANDLE *pdev) -{ - USB_OTG_DEP0XFRSIZ_TypeDef doeptsize0; - doeptsize0.d32 = 0; - doeptsize0.b.supcnt = 3; - doeptsize0.b.pktcnt = 1; - doeptsize0.b.xfersize = 8 * 3; - USB_OTG_WRITE_REG32( &pdev->regs.OUTEP_REGS[0]->DOEPTSIZ, doeptsize0.d32 ); - - if (pdev->cfg.dma_enable == 1) - { - USB_OTG_DEPCTL_TypeDef doepctl; - doepctl.d32 = 0; - USB_OTG_WRITE_REG32( &pdev->regs.OUTEP_REGS[0]->DOEPDMA, - (uint32_t)&pdev->dev.setup_packet); - - /* EP enable */ - doepctl.d32 = USB_OTG_READ_REG32(&pdev->regs.OUTEP_REGS[0]->DOEPCTL); - doepctl.b.epena = 1; - doepctl.d32 = 0x80008000; - USB_OTG_WRITE_REG32( &pdev->regs.OUTEP_REGS[0]->DOEPCTL, doepctl.d32); - } -} - -/** -* @brief USB_OTG_RemoteWakeup : active remote wakeup signalling -* @param None -* @retval : None -*/ -void USB_OTG_ActiveRemoteWakeup(USB_OTG_CORE_HANDLE *pdev) -{ - - USB_OTG_DCTL_TypeDef dctl; - USB_OTG_DSTS_TypeDef dsts; - USB_OTG_PCGCCTL_TypeDef power; - - if (pdev->dev.DevRemoteWakeup) - { - dsts.d32 = USB_OTG_READ_REG32(&pdev->regs.DREGS->DSTS); - if(dsts.b.suspsts == 1) - { - if(pdev->cfg.low_power) - { - /* un-gate USB Core clock */ - power.d32 = USB_OTG_READ_REG32(pdev->regs.PCGCCTL); - power.b.gatehclk = 0; - power.b.stoppclk = 0; - USB_OTG_WRITE_REG32(pdev->regs.PCGCCTL, power.d32); - } - /* active Remote wakeup signaling */ - dctl.d32 = 0; - dctl.b.rmtwkupsig = 1; - USB_OTG_MODIFY_REG32(&pdev->regs.DREGS->DCTL, 0, dctl.d32); - USB_OTG_BSP_mDelay(5); - USB_OTG_MODIFY_REG32(&pdev->regs.DREGS->DCTL, dctl.d32, 0 ); - } - } -} - - -/** -* @brief USB_OTG_UngateClock : active USB Core clock -* @param None -* @retval : None -*/ -void USB_OTG_UngateClock(USB_OTG_CORE_HANDLE *pdev) -{ - if(pdev->cfg.low_power) - { - - USB_OTG_DSTS_TypeDef dsts; - USB_OTG_PCGCCTL_TypeDef power; - - dsts.d32 = USB_OTG_READ_REG32(&pdev->regs.DREGS->DSTS); - - if(dsts.b.suspsts == 1) - { - /* un-gate USB Core clock */ - power.d32 = USB_OTG_READ_REG32(pdev->regs.PCGCCTL); - power.b.gatehclk = 0; - power.b.stoppclk = 0; - USB_OTG_WRITE_REG32(pdev->regs.PCGCCTL, power.d32); - - } - } -} - -/** -* @brief Stop the device and clean up fifo's -* @param None -* @retval : None -*/ -void USB_OTG_StopDevice(USB_OTG_CORE_HANDLE *pdev) -{ - uint32_t i; - - pdev->dev.device_status = 1; - - for (i = 0; i < pdev->cfg.dev_endpoints ; i++) - { - USB_OTG_WRITE_REG32( &pdev->regs.INEP_REGS[i]->DIEPINT, 0xFF); - USB_OTG_WRITE_REG32( &pdev->regs.OUTEP_REGS[i]->DOEPINT, 0xFF); - } - - USB_OTG_WRITE_REG32( &pdev->regs.DREGS->DIEPMSK, 0 ); - USB_OTG_WRITE_REG32( &pdev->regs.DREGS->DOEPMSK, 0 ); - USB_OTG_WRITE_REG32( &pdev->regs.DREGS->DAINTMSK, 0 ); - USB_OTG_WRITE_REG32( &pdev->regs.DREGS->DAINT, 0xFFFFFFFF ); - - /* Flush the FIFO */ - USB_OTG_FlushRxFifo(pdev); - USB_OTG_FlushTxFifo(pdev , 0x10 ); -} - -/** -* @brief returns the EP Status -* @param pdev : Selected device -* ep : endpoint structure -* @retval : EP status -*/ - -uint32_t USB_OTG_GetEPStatus(USB_OTG_CORE_HANDLE *pdev ,USB_OTG_EP *ep) -{ - USB_OTG_DEPCTL_TypeDef depctl; - __IO uint32_t *depctl_addr; - uint32_t Status = 0; - - depctl.d32 = 0; - if (ep->is_in == 1) - { - depctl_addr = &(pdev->regs.INEP_REGS[ep->num]->DIEPCTL); - depctl.d32 = USB_OTG_READ_REG32(depctl_addr); - - if (depctl.b.stall == 1) - Status = USB_OTG_EP_TX_STALL; - else if (depctl.b.naksts == 1) - Status = USB_OTG_EP_TX_NAK; - else - Status = USB_OTG_EP_TX_VALID; - - } - else - { - depctl_addr = &(pdev->regs.OUTEP_REGS[ep->num]->DOEPCTL); - depctl.d32 = USB_OTG_READ_REG32(depctl_addr); - if (depctl.b.stall == 1) - Status = USB_OTG_EP_RX_STALL; - else if (depctl.b.naksts == 1) - Status = USB_OTG_EP_RX_NAK; - else - Status = USB_OTG_EP_RX_VALID; - } - - /* Return the current status */ - return Status; -} - -/** -* @brief Set the EP Status -* @param pdev : Selected device -* Status : new Status -* ep : EP structure -* @retval : None -*/ -void USB_OTG_SetEPStatus (USB_OTG_CORE_HANDLE *pdev , USB_OTG_EP *ep , uint32_t Status) -{ - USB_OTG_DEPCTL_TypeDef depctl; - __IO uint32_t *depctl_addr; - - depctl.d32 = 0; - - /* Process for IN endpoint */ - if (ep->is_in == 1) - { - depctl_addr = &(pdev->regs.INEP_REGS[ep->num]->DIEPCTL); - depctl.d32 = USB_OTG_READ_REG32(depctl_addr); - - if (Status == USB_OTG_EP_TX_STALL) - { - USB_OTG_EPSetStall(pdev, ep); return; - } - else if (Status == USB_OTG_EP_TX_NAK) - depctl.b.snak = 1; - else if (Status == USB_OTG_EP_TX_VALID) - { - if (depctl.b.stall == 1) - { - ep->even_odd_frame = 0; - USB_OTG_EPClearStall(pdev, ep); - return; - } - depctl.b.cnak = 1; - depctl.b.usbactep = 1; - depctl.b.epena = 1; - } - else if (Status == USB_OTG_EP_TX_DIS) - depctl.b.usbactep = 0; - } - else /* Process for OUT endpoint */ - { - depctl_addr = &(pdev->regs.OUTEP_REGS[ep->num]->DOEPCTL); - depctl.d32 = USB_OTG_READ_REG32(depctl_addr); - - if (Status == USB_OTG_EP_RX_STALL) { - depctl.b.stall = 1; - } - else if (Status == USB_OTG_EP_RX_NAK) - depctl.b.snak = 1; - else if (Status == USB_OTG_EP_RX_VALID) - { - if (depctl.b.stall == 1) - { - ep->even_odd_frame = 0; - USB_OTG_EPClearStall(pdev, ep); - return; - } - depctl.b.cnak = 1; - depctl.b.usbactep = 1; - depctl.b.epena = 1; - } - else if (Status == USB_OTG_EP_RX_DIS) - { - depctl.b.usbactep = 0; - } - } - - USB_OTG_WRITE_REG32(depctl_addr, depctl.d32); -} - -#endif -/** -* @} -*/ - -/** -* @} -*/ - -/** -* @} -*/ - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/stm/lib/usb_core.h b/stm/lib/usb_core.h deleted file mode 100644 index c574665c5..000000000 --- a/stm/lib/usb_core.h +++ /dev/null @@ -1,417 +0,0 @@ -/** - ****************************************************************************** - * @file usb_core.h - * @author MCD Application Team - * @version V2.1.0 - * @date 19-March-2012 - * @brief Header of the Core Layer - ****************************************************************************** - * @attention - * - *

© COPYRIGHT 2012 STMicroelectronics

- * - * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License"); - * You may not use this file except in compliance with the License. - * You may obtain a copy of the License at: - * - * http://www.st.com/software_license_agreement_liberty_v2 - * - * Unless required by applicable law or agreed to in writing, software - * distributed under the License is distributed on an "AS IS" BASIS, - * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - * See the License for the specific language governing permissions and - * limitations under the License. - * - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __USB_CORE_H__ -#define __USB_CORE_H__ - -/* Includes ------------------------------------------------------------------*/ -#include "usb_conf.h" -#include "usb_regs.h" -#include "usb_defines.h" - - -/** @addtogroup USB_OTG_DRIVER - * @{ - */ - -/** @defgroup USB_CORE - * @brief usb otg driver core layer - * @{ - */ - - -/** @defgroup USB_CORE_Exported_Defines - * @{ - */ - -#define USB_OTG_EP0_IDLE 0 -#define USB_OTG_EP0_SETUP 1 -#define USB_OTG_EP0_DATA_IN 2 -#define USB_OTG_EP0_DATA_OUT 3 -#define USB_OTG_EP0_STATUS_IN 4 -#define USB_OTG_EP0_STATUS_OUT 5 -#define USB_OTG_EP0_STALL 6 - -#define USB_OTG_EP_TX_DIS 0x0000 -#define USB_OTG_EP_TX_STALL 0x0010 -#define USB_OTG_EP_TX_NAK 0x0020 -#define USB_OTG_EP_TX_VALID 0x0030 - -#define USB_OTG_EP_RX_DIS 0x0000 -#define USB_OTG_EP_RX_STALL 0x1000 -#define USB_OTG_EP_RX_NAK 0x2000 -#define USB_OTG_EP_RX_VALID 0x3000 -/** - * @} - */ -#define MAX_DATA_LENGTH 0x200 - -/** @defgroup USB_CORE_Exported_Types - * @{ - */ - - -typedef enum { - USB_OTG_OK = 0, - USB_OTG_FAIL -}USB_OTG_STS; - -typedef enum { - HC_IDLE = 0, - HC_XFRC, - HC_HALTED, - HC_NAK, - HC_NYET, - HC_STALL, - HC_XACTERR, - HC_BBLERR, - HC_DATATGLERR, -}HC_STATUS; - -typedef enum { - URB_IDLE = 0, - URB_DONE, - URB_NOTREADY, - URB_ERROR, - URB_STALL -}URB_STATE; - -typedef enum { - CTRL_START = 0, - CTRL_XFRC, - CTRL_HALTED, - CTRL_NAK, - CTRL_STALL, - CTRL_XACTERR, - CTRL_BBLERR, - CTRL_DATATGLERR, - CTRL_FAIL -}CTRL_STATUS; - - -typedef struct USB_OTG_hc -{ - uint8_t dev_addr ; - uint8_t ep_num; - uint8_t ep_is_in; - uint8_t speed; - uint8_t do_ping; - uint8_t ep_type; - uint16_t max_packet; - uint8_t data_pid; - uint8_t *xfer_buff; - uint32_t xfer_len; - uint32_t xfer_count; - uint8_t toggle_in; - uint8_t toggle_out; - uint32_t dma_addr; -} -USB_OTG_HC , *PUSB_OTG_HC; - -typedef struct USB_OTG_ep -{ - uint8_t num; - uint8_t is_in; - uint8_t is_stall; - uint8_t type; - uint8_t data_pid_start; - uint8_t even_odd_frame; - uint16_t tx_fifo_num; - uint32_t maxpacket; - /* transaction level variables*/ - uint8_t *xfer_buff; - uint32_t dma_addr; - uint32_t xfer_len; - uint32_t xfer_count; - /* Transfer level variables*/ - uint32_t rem_data_len; - uint32_t total_data_len; - uint32_t ctl_data_len; - -} - -USB_OTG_EP , *PUSB_OTG_EP; - - - -typedef struct USB_OTG_core_cfg -{ - uint8_t host_channels; - uint8_t dev_endpoints; - uint8_t speed; - uint8_t dma_enable; - uint16_t mps; - uint16_t TotalFifoSize; - uint8_t phy_itface; - uint8_t Sof_output; - uint8_t low_power; - uint8_t coreID; - -} -USB_OTG_CORE_CFGS, *PUSB_OTG_CORE_CFGS; - - - -typedef struct usb_setup_req { - - uint8_t bmRequest; - uint8_t bRequest; - uint16_t wValue; - uint16_t wIndex; - uint16_t wLength; -} USB_SETUP_REQ; - -typedef struct _Device_TypeDef -{ - uint8_t *(*GetDeviceDescriptor)( uint8_t speed , uint16_t *length); - uint8_t *(*GetLangIDStrDescriptor)( uint8_t speed , uint16_t *length); - uint8_t *(*GetManufacturerStrDescriptor)( uint8_t speed , uint16_t *length); - uint8_t *(*GetProductStrDescriptor)( uint8_t speed , uint16_t *length); - uint8_t *(*GetSerialStrDescriptor)( uint8_t speed , uint16_t *length); - uint8_t *(*GetConfigurationStrDescriptor)( uint8_t speed , uint16_t *length); - uint8_t *(*GetInterfaceStrDescriptor)( uint8_t speed , uint16_t *length); -} USBD_DEVICE, *pUSBD_DEVICE; - -//typedef struct USB_OTG_hPort -//{ -// void (*Disconnect) (void *phost); -// void (*Connect) (void *phost); -// uint8_t ConnStatus; -// uint8_t DisconnStatus; -// uint8_t ConnHandled; -// uint8_t DisconnHandled; -//} USB_OTG_hPort_TypeDef; - -typedef struct _Device_cb -{ - uint8_t (*Init) (void *pdev , uint8_t cfgidx); - uint8_t (*DeInit) (void *pdev , uint8_t cfgidx); - /* Control Endpoints*/ - uint8_t (*Setup) (void *pdev , USB_SETUP_REQ *req); - uint8_t (*EP0_TxSent) (void *pdev ); - uint8_t (*EP0_RxReady) (void *pdev ); - /* Class Specific Endpoints*/ - uint8_t (*DataIn) (void *pdev , uint8_t epnum); - uint8_t (*DataOut) (void *pdev , uint8_t epnum); - uint8_t (*SOF) (void *pdev); - uint8_t (*IsoINIncomplete) (void *pdev); - uint8_t (*IsoOUTIncomplete) (void *pdev); - - uint8_t *(*GetConfigDescriptor)( uint8_t speed , uint16_t *length); -#ifdef USB_OTG_HS_CORE - uint8_t *(*GetOtherConfigDescriptor)( uint8_t speed , uint16_t *length); -#endif - -#ifdef USB_SUPPORT_USER_STRING_DESC - uint8_t *(*GetUsrStrDescriptor)( uint8_t speed ,uint8_t index, uint16_t *length); -#endif - -} USBD_Class_cb_TypeDef; - - - -typedef struct _USBD_USR_PROP -{ - void (*Init)(void); - void (*DeviceReset)(uint8_t speed); - void (*DeviceConfigured)(void); - void (*DeviceSuspended)(void); - void (*DeviceResumed)(void); - - void (*DeviceConnected)(void); - void (*DeviceDisconnected)(void); - -} -USBD_Usr_cb_TypeDef; - -typedef struct _DCD -{ - uint8_t device_config; - uint8_t device_state; - uint8_t device_status; - uint8_t device_old_status; - uint8_t device_address; - uint8_t connection_status; - uint8_t test_mode; - uint32_t DevRemoteWakeup; - USB_OTG_EP in_ep [USB_OTG_MAX_TX_FIFOS]; - USB_OTG_EP out_ep [USB_OTG_MAX_TX_FIFOS]; - uint8_t setup_packet [8*3]; - USBD_Class_cb_TypeDef *class_cb; - USBD_Usr_cb_TypeDef *usr_cb; - USBD_DEVICE *usr_device; - uint8_t *pConfig_descriptor; - } -DCD_DEV , *DCD_PDEV; - - -typedef struct _HCD -{ - uint8_t Rx_Buffer [MAX_DATA_LENGTH]; - __IO uint32_t ConnSts; - __IO uint32_t ErrCnt[USB_OTG_MAX_TX_FIFOS]; - __IO uint32_t XferCnt[USB_OTG_MAX_TX_FIFOS]; - __IO HC_STATUS HC_Status[USB_OTG_MAX_TX_FIFOS]; - __IO URB_STATE URB_State[USB_OTG_MAX_TX_FIFOS]; - USB_OTG_HC hc [USB_OTG_MAX_TX_FIFOS]; - uint16_t channel [USB_OTG_MAX_TX_FIFOS]; -// USB_OTG_hPort_TypeDef *port_cb; -} -HCD_DEV , *USB_OTG_USBH_PDEV; - - -typedef struct _OTG -{ - uint8_t OTG_State; - uint8_t OTG_PrevState; - uint8_t OTG_Mode; -} -OTG_DEV , *USB_OTG_USBO_PDEV; - -typedef struct USB_OTG_handle -{ - USB_OTG_CORE_CFGS cfg; - USB_OTG_CORE_REGS regs; -#ifdef USE_DEVICE_MODE - DCD_DEV dev; -#endif -#ifdef USE_HOST_MODE - HCD_DEV host; -#endif -#ifdef USE_OTG_MODE - OTG_DEV otg; -#endif -} -USB_OTG_CORE_HANDLE , *PUSB_OTG_CORE_HANDLE; - -/** - * @} - */ - - -/** @defgroup USB_CORE_Exported_Macros - * @{ - */ - -/** - * @} - */ - -/** @defgroup USB_CORE_Exported_Variables - * @{ - */ -/** - * @} - */ - -/** @defgroup USB_CORE_Exported_FunctionsPrototype - * @{ - */ - - -USB_OTG_STS USB_OTG_CoreInit (USB_OTG_CORE_HANDLE *pdev); -USB_OTG_STS USB_OTG_SelectCore (USB_OTG_CORE_HANDLE *pdev, - USB_OTG_CORE_ID_TypeDef coreID); -USB_OTG_STS USB_OTG_EnableGlobalInt (USB_OTG_CORE_HANDLE *pdev); -USB_OTG_STS USB_OTG_DisableGlobalInt(USB_OTG_CORE_HANDLE *pdev); -void* USB_OTG_ReadPacket (USB_OTG_CORE_HANDLE *pdev , - uint8_t *dest, - uint16_t len); -USB_OTG_STS USB_OTG_WritePacket (USB_OTG_CORE_HANDLE *pdev , - uint8_t *src, - uint8_t ch_ep_num, - uint16_t len); -USB_OTG_STS USB_OTG_FlushTxFifo (USB_OTG_CORE_HANDLE *pdev , uint32_t num); -USB_OTG_STS USB_OTG_FlushRxFifo (USB_OTG_CORE_HANDLE *pdev); - -uint32_t USB_OTG_ReadCoreItr (USB_OTG_CORE_HANDLE *pdev); -uint32_t USB_OTG_ReadOtgItr (USB_OTG_CORE_HANDLE *pdev); -uint8_t USB_OTG_IsHostMode (USB_OTG_CORE_HANDLE *pdev); -uint8_t USB_OTG_IsDeviceMode (USB_OTG_CORE_HANDLE *pdev); -uint32_t USB_OTG_GetMode (USB_OTG_CORE_HANDLE *pdev); -USB_OTG_STS USB_OTG_PhyInit (USB_OTG_CORE_HANDLE *pdev); -USB_OTG_STS USB_OTG_SetCurrentMode (USB_OTG_CORE_HANDLE *pdev, - uint8_t mode); - -/*********************** HOST APIs ********************************************/ -#ifdef USE_HOST_MODE -USB_OTG_STS USB_OTG_CoreInitHost (USB_OTG_CORE_HANDLE *pdev); -USB_OTG_STS USB_OTG_EnableHostInt (USB_OTG_CORE_HANDLE *pdev); -USB_OTG_STS USB_OTG_HC_Init (USB_OTG_CORE_HANDLE *pdev, uint8_t hc_num); -USB_OTG_STS USB_OTG_HC_Halt (USB_OTG_CORE_HANDLE *pdev, uint8_t hc_num); -USB_OTG_STS USB_OTG_HC_StartXfer (USB_OTG_CORE_HANDLE *pdev, uint8_t hc_num); -USB_OTG_STS USB_OTG_HC_DoPing (USB_OTG_CORE_HANDLE *pdev , uint8_t hc_num); -uint32_t USB_OTG_ReadHostAllChannels_intr (USB_OTG_CORE_HANDLE *pdev); -uint32_t USB_OTG_ResetPort (USB_OTG_CORE_HANDLE *pdev); -uint32_t USB_OTG_ReadHPRT0 (USB_OTG_CORE_HANDLE *pdev); -void USB_OTG_DriveVbus (USB_OTG_CORE_HANDLE *pdev, uint8_t state); -void USB_OTG_InitFSLSPClkSel (USB_OTG_CORE_HANDLE *pdev ,uint8_t freq); -uint8_t USB_OTG_IsEvenFrame (USB_OTG_CORE_HANDLE *pdev) ; -void USB_OTG_StopHost (USB_OTG_CORE_HANDLE *pdev); -#endif -/********************* DEVICE APIs ********************************************/ -#ifdef USE_DEVICE_MODE -USB_OTG_STS USB_OTG_CoreInitDev (USB_OTG_CORE_HANDLE *pdev); -USB_OTG_STS USB_OTG_EnableDevInt (USB_OTG_CORE_HANDLE *pdev); -uint32_t USB_OTG_ReadDevAllInEPItr (USB_OTG_CORE_HANDLE *pdev); -enum USB_OTG_SPEED USB_OTG_GetDeviceSpeed (USB_OTG_CORE_HANDLE *pdev); -USB_OTG_STS USB_OTG_EP0Activate (USB_OTG_CORE_HANDLE *pdev); -USB_OTG_STS USB_OTG_EPActivate (USB_OTG_CORE_HANDLE *pdev , USB_OTG_EP *ep); -USB_OTG_STS USB_OTG_EPDeactivate(USB_OTG_CORE_HANDLE *pdev , USB_OTG_EP *ep); -USB_OTG_STS USB_OTG_EPStartXfer (USB_OTG_CORE_HANDLE *pdev , USB_OTG_EP *ep); -USB_OTG_STS USB_OTG_EP0StartXfer(USB_OTG_CORE_HANDLE *pdev , USB_OTG_EP *ep); -USB_OTG_STS USB_OTG_EPSetStall (USB_OTG_CORE_HANDLE *pdev , USB_OTG_EP *ep); -USB_OTG_STS USB_OTG_EPClearStall (USB_OTG_CORE_HANDLE *pdev , USB_OTG_EP *ep); -uint32_t USB_OTG_ReadDevAllOutEp_itr (USB_OTG_CORE_HANDLE *pdev); -uint32_t USB_OTG_ReadDevOutEP_itr (USB_OTG_CORE_HANDLE *pdev , uint8_t epnum); -uint32_t USB_OTG_ReadDevAllInEPItr (USB_OTG_CORE_HANDLE *pdev); -void USB_OTG_InitDevSpeed (USB_OTG_CORE_HANDLE *pdev , uint8_t speed); -uint8_t USBH_IsEvenFrame (USB_OTG_CORE_HANDLE *pdev); -void USB_OTG_EP0_OutStart(USB_OTG_CORE_HANDLE *pdev); -void USB_OTG_ActiveRemoteWakeup(USB_OTG_CORE_HANDLE *pdev); -void USB_OTG_UngateClock(USB_OTG_CORE_HANDLE *pdev); -void USB_OTG_StopDevice(USB_OTG_CORE_HANDLE *pdev); -void USB_OTG_SetEPStatus (USB_OTG_CORE_HANDLE *pdev , USB_OTG_EP *ep , uint32_t Status); -uint32_t USB_OTG_GetEPStatus(USB_OTG_CORE_HANDLE *pdev ,USB_OTG_EP *ep); -#endif -/** - * @} - */ - -#endif /* __USB_CORE_H__ */ - - -/** - * @} - */ - -/** - * @} - */ -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ - diff --git a/stm/lib/usb_dcd.c b/stm/lib/usb_dcd.c deleted file mode 100644 index eac8c3371..000000000 --- a/stm/lib/usb_dcd.c +++ /dev/null @@ -1,478 +0,0 @@ -/** - ****************************************************************************** - * @file usb_dcd.c - * @author MCD Application Team - * @version V2.1.0 - * @date 19-March-2012 - * @brief Peripheral Device Interface Layer - ****************************************************************************** - * @attention - * - *

© COPYRIGHT 2012 STMicroelectronics

- * - * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License"); - * You may not use this file except in compliance with the License. - * You may obtain a copy of the License at: - * - * http://www.st.com/software_license_agreement_liberty_v2 - * - * Unless required by applicable law or agreed to in writing, software - * distributed under the License is distributed on an "AS IS" BASIS, - * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - * See the License for the specific language governing permissions and - * limitations under the License. - * - ****************************************************************************** - */ - -/* Includes ------------------------------------------------------------------*/ -#include "usb_dcd.h" -#include "usb_bsp.h" - - -/** @addtogroup USB_OTG_DRIVER -* @{ -*/ - -/** @defgroup USB_DCD -* @brief This file is the interface between EFSL ans Host mass-storage class -* @{ -*/ - - -/** @defgroup USB_DCD_Private_Defines -* @{ -*/ -/** -* @} -*/ - - -/** @defgroup USB_DCD_Private_TypesDefinitions -* @{ -*/ -/** -* @} -*/ - - - -/** @defgroup USB_DCD_Private_Macros -* @{ -*/ -/** -* @} -*/ - - -/** @defgroup USB_DCD_Private_Variables -* @{ -*/ -/** -* @} -*/ - - -/** @defgroup USB_DCD_Private_FunctionPrototypes -* @{ -*/ - -/** -* @} -*/ - - -/** @defgroup USB_DCD_Private_Functions -* @{ -*/ - - - -void DCD_Init(USB_OTG_CORE_HANDLE *pdev , - USB_OTG_CORE_ID_TypeDef coreID) -{ - uint32_t i; - USB_OTG_EP *ep; - - USB_OTG_SelectCore (pdev , coreID); - - pdev->dev.device_status = USB_OTG_DEFAULT; - pdev->dev.device_address = 0; - - /* Init ep structure */ - for (i = 0; i < pdev->cfg.dev_endpoints ; i++) - { - ep = &pdev->dev.in_ep[i]; - /* Init ep structure */ - ep->is_in = 1; - ep->num = i; - ep->tx_fifo_num = i; - /* Control until ep is actvated */ - ep->type = EP_TYPE_CTRL; - ep->maxpacket = USB_OTG_MAX_EP0_SIZE; - ep->xfer_buff = 0; - ep->xfer_len = 0; - } - - for (i = 0; i < pdev->cfg.dev_endpoints; i++) - { - ep = &pdev->dev.out_ep[i]; - /* Init ep structure */ - ep->is_in = 0; - ep->num = i; - ep->tx_fifo_num = i; - /* Control until ep is activated */ - ep->type = EP_TYPE_CTRL; - ep->maxpacket = USB_OTG_MAX_EP0_SIZE; - ep->xfer_buff = 0; - ep->xfer_len = 0; - } - - USB_OTG_DisableGlobalInt(pdev); - - /*Init the Core (common init.) */ - USB_OTG_CoreInit(pdev); - - - /* Force Device Mode*/ - USB_OTG_SetCurrentMode(pdev, DEVICE_MODE); - - /* Init Device */ - USB_OTG_CoreInitDev(pdev); - - - /* Enable USB Global interrupt */ - USB_OTG_EnableGlobalInt(pdev); -} - - -/** -* @brief Configure an EP -* @param pdev : Device instance -* @param epdesc : Endpoint Descriptor -* @retval : status -*/ -uint32_t DCD_EP_Open(USB_OTG_CORE_HANDLE *pdev , - uint8_t ep_addr, - uint16_t ep_mps, - uint8_t ep_type) -{ - USB_OTG_EP *ep; - - if ((ep_addr & 0x80) == 0x80) - { - ep = &pdev->dev.in_ep[ep_addr & 0x7F]; - } - else - { - ep = &pdev->dev.out_ep[ep_addr & 0x7F]; - } - ep->num = ep_addr & 0x7F; - - ep->is_in = (0x80 & ep_addr) != 0; - ep->maxpacket = ep_mps; - ep->type = ep_type; - if (ep->is_in) - { - /* Assign a Tx FIFO */ - ep->tx_fifo_num = ep->num; - } - /* Set initial data PID. */ - if (ep_type == USB_OTG_EP_BULK ) - { - ep->data_pid_start = 0; - } - USB_OTG_EPActivate(pdev , ep ); - return 0; -} -/** -* @brief called when an EP is disabled -* @param pdev: device instance -* @param ep_addr: endpoint address -* @retval : status -*/ -uint32_t DCD_EP_Close(USB_OTG_CORE_HANDLE *pdev , uint8_t ep_addr) -{ - USB_OTG_EP *ep; - - if ((ep_addr&0x80) == 0x80) - { - ep = &pdev->dev.in_ep[ep_addr & 0x7F]; - } - else - { - ep = &pdev->dev.out_ep[ep_addr & 0x7F]; - } - ep->num = ep_addr & 0x7F; - ep->is_in = (0x80 & ep_addr) != 0; - USB_OTG_EPDeactivate(pdev , ep ); - return 0; -} - - -/** -* @brief DCD_EP_PrepareRx -* @param pdev: device instance -* @param ep_addr: endpoint address -* @param pbuf: pointer to Rx buffer -* @param buf_len: data length -* @retval : status -*/ -uint32_t DCD_EP_PrepareRx( USB_OTG_CORE_HANDLE *pdev, - uint8_t ep_addr, - uint8_t *pbuf, - uint16_t buf_len) -{ - USB_OTG_EP *ep; - - ep = &pdev->dev.out_ep[ep_addr & 0x7F]; - - /*setup and start the Xfer */ - ep->xfer_buff = pbuf; - ep->xfer_len = buf_len; - ep->xfer_count = 0; - ep->is_in = 0; - ep->num = ep_addr & 0x7F; - - if (pdev->cfg.dma_enable == 1) - { - ep->dma_addr = (uint32_t)pbuf; - } - - if ( ep->num == 0 ) - { - USB_OTG_EP0StartXfer(pdev , ep); - } - else - { - USB_OTG_EPStartXfer(pdev, ep ); - } - return 0; -} - -/** -* @brief Transmit data over USB -* @param pdev: device instance -* @param ep_addr: endpoint address -* @param pbuf: pointer to Tx buffer -* @param buf_len: data length -* @retval : status -*/ -uint32_t DCD_EP_Tx ( USB_OTG_CORE_HANDLE *pdev, - uint8_t ep_addr, - uint8_t *pbuf, - uint32_t buf_len) -{ - USB_OTG_EP *ep; - - ep = &pdev->dev.in_ep[ep_addr & 0x7F]; - - /* Setup and start the Transfer */ - ep->is_in = 1; - ep->num = ep_addr & 0x7F; - ep->xfer_buff = pbuf; - ep->dma_addr = (uint32_t)pbuf; - ep->xfer_count = 0; - ep->xfer_len = buf_len; - - if ( ep->num == 0 ) - { - USB_OTG_EP0StartXfer(pdev , ep); - } - else - { - USB_OTG_EPStartXfer(pdev, ep ); - } - return 0; -} - - -/** -* @brief Stall an endpoint. -* @param pdev: device instance -* @param epnum: endpoint address -* @retval : status -*/ -uint32_t DCD_EP_Stall (USB_OTG_CORE_HANDLE *pdev, uint8_t epnum) -{ - USB_OTG_EP *ep; - if ((0x80 & epnum) == 0x80) - { - ep = &pdev->dev.in_ep[epnum & 0x7F]; - } - else - { - ep = &pdev->dev.out_ep[epnum]; - } - - ep->is_stall = 1; - ep->num = epnum & 0x7F; - ep->is_in = ((epnum & 0x80) == 0x80); - - USB_OTG_EPSetStall(pdev , ep); - return (0); -} - - -/** -* @brief Clear stall condition on endpoints. -* @param pdev: device instance -* @param epnum: endpoint address -* @retval : status -*/ -uint32_t DCD_EP_ClrStall (USB_OTG_CORE_HANDLE *pdev, uint8_t epnum) -{ - USB_OTG_EP *ep; - if ((0x80 & epnum) == 0x80) - { - ep = &pdev->dev.in_ep[epnum & 0x7F]; - } - else - { - ep = &pdev->dev.out_ep[epnum]; - } - - ep->is_stall = 0; - ep->num = epnum & 0x7F; - ep->is_in = ((epnum & 0x80) == 0x80); - - USB_OTG_EPClearStall(pdev , ep); - return (0); -} - - -/** -* @brief This Function flushes the FIFOs. -* @param pdev: device instance -* @param epnum: endpoint address -* @retval : status -*/ -uint32_t DCD_EP_Flush (USB_OTG_CORE_HANDLE *pdev , uint8_t epnum) -{ - - if ((epnum & 0x80) == 0x80) - { - USB_OTG_FlushTxFifo(pdev, epnum & 0x7F); - } - else - { - USB_OTG_FlushRxFifo(pdev); - } - - return (0); -} - - -/** -* @brief This Function set USB device address -* @param pdev: device instance -* @param address: new device address -* @retval : status -*/ -void DCD_EP_SetAddress (USB_OTG_CORE_HANDLE *pdev, uint8_t address) -{ - USB_OTG_DCFG_TypeDef dcfg; - dcfg.d32 = 0; - dcfg.b.devaddr = address; - USB_OTG_MODIFY_REG32( &pdev->regs.DREGS->DCFG, 0, dcfg.d32); -} - -/** -* @brief Connect device (enable internal pull-up) -* @param pdev: device instance -* @retval : None -*/ -void DCD_DevConnect (USB_OTG_CORE_HANDLE *pdev) -{ -#ifndef USE_OTG_MODE - USB_OTG_DCTL_TypeDef dctl; - dctl.d32 = USB_OTG_READ_REG32(&pdev->regs.DREGS->DCTL); - /* Connect device */ - dctl.b.sftdiscon = 0; - USB_OTG_WRITE_REG32(&pdev->regs.DREGS->DCTL, dctl.d32); - USB_OTG_BSP_mDelay(3); -#endif -} - - -/** -* @brief Disconnect device (disable internal pull-up) -* @param pdev: device instance -* @retval : None -*/ -void DCD_DevDisconnect (USB_OTG_CORE_HANDLE *pdev) -{ -#ifndef USE_OTG_MODE - USB_OTG_DCTL_TypeDef dctl; - dctl.d32 = USB_OTG_READ_REG32(&pdev->regs.DREGS->DCTL); - /* Disconnect device for 3ms */ - dctl.b.sftdiscon = 1; - USB_OTG_WRITE_REG32(&pdev->regs.DREGS->DCTL, dctl.d32); - USB_OTG_BSP_mDelay(3); -#endif -} - - -/** -* @brief returns the EP Status -* @param pdev : Selected device -* epnum : endpoint address -* @retval : EP status -*/ - -uint32_t DCD_GetEPStatus(USB_OTG_CORE_HANDLE *pdev ,uint8_t epnum) -{ - USB_OTG_EP *ep; - uint32_t Status = 0; - - if ((0x80 & epnum) == 0x80) - { - ep = &pdev->dev.in_ep[epnum & 0x7F]; - } - else - { - ep = &pdev->dev.out_ep[epnum]; - } - - Status = USB_OTG_GetEPStatus(pdev ,ep); - - /* Return the current status */ - return Status; -} - -/** -* @brief Set the EP Status -* @param pdev : Selected device -* Status : new Status -* epnum : EP address -* @retval : None -*/ -void DCD_SetEPStatus (USB_OTG_CORE_HANDLE *pdev , uint8_t epnum , uint32_t Status) -{ - USB_OTG_EP *ep; - - if ((0x80 & epnum) == 0x80) - { - ep = &pdev->dev.in_ep[epnum & 0x7F]; - } - else - { - ep = &pdev->dev.out_ep[epnum]; - } - - USB_OTG_SetEPStatus(pdev ,ep , Status); -} - -/** -* @} -*/ - -/** -* @} -*/ - -/** -* @} -*/ - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/stm/lib/usb_dcd.h b/stm/lib/usb_dcd.h deleted file mode 100644 index 6922782a7..000000000 --- a/stm/lib/usb_dcd.h +++ /dev/null @@ -1,164 +0,0 @@ -/** - ****************************************************************************** - * @file usb_dcd.h - * @author MCD Application Team - * @version V2.1.0 - * @date 19-March-2012 - * @brief Peripheral Driver Header file - ****************************************************************************** - * @attention - * - *

© COPYRIGHT 2012 STMicroelectronics

- * - * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License"); - * You may not use this file except in compliance with the License. - * You may obtain a copy of the License at: - * - * http://www.st.com/software_license_agreement_liberty_v2 - * - * Unless required by applicable law or agreed to in writing, software - * distributed under the License is distributed on an "AS IS" BASIS, - * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - * See the License for the specific language governing permissions and - * limitations under the License. - * - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __DCD_H__ -#define __DCD_H__ - -/* Includes ------------------------------------------------------------------*/ -#include "usb_core.h" - - -/** @addtogroup USB_OTG_DRIVER -* @{ -*/ - -/** @defgroup USB_DCD -* @brief This file is the -* @{ -*/ - - -/** @defgroup USB_DCD_Exported_Defines -* @{ -*/ -#define USB_OTG_EP_CONTROL 0 -#define USB_OTG_EP_ISOC 1 -#define USB_OTG_EP_BULK 2 -#define USB_OTG_EP_INT 3 -#define USB_OTG_EP_MASK 3 - -/* Device Status */ -#define USB_OTG_DEFAULT 1 -#define USB_OTG_ADDRESSED 2 -#define USB_OTG_CONFIGURED 3 -#define USB_OTG_SUSPENDED 4 - -/** -* @} -*/ - - -/** @defgroup USB_DCD_Exported_Types -* @{ -*/ -/******************************************************************************** -Data structure type -********************************************************************************/ -typedef struct -{ - uint8_t bLength; - uint8_t bDescriptorType; - uint8_t bEndpointAddress; - uint8_t bmAttributes; - uint16_t wMaxPacketSize; - uint8_t bInterval; -} -EP_DESCRIPTOR , *PEP_DESCRIPTOR; - -/** -* @} -*/ - - -/** @defgroup USB_DCD_Exported_Macros -* @{ -*/ -/** -* @} -*/ - -/** @defgroup USB_DCD_Exported_Variables -* @{ -*/ -/** -* @} -*/ - -/** @defgroup USB_DCD_Exported_FunctionsPrototype -* @{ -*/ -/******************************************************************************** -EXPORTED FUNCTION FROM THE USB-OTG LAYER -********************************************************************************/ -void DCD_Init(USB_OTG_CORE_HANDLE *pdev , - USB_OTG_CORE_ID_TypeDef coreID); - -void DCD_DevConnect (USB_OTG_CORE_HANDLE *pdev); -void DCD_DevDisconnect (USB_OTG_CORE_HANDLE *pdev); -void DCD_EP_SetAddress (USB_OTG_CORE_HANDLE *pdev, - uint8_t address); -uint32_t DCD_EP_Open(USB_OTG_CORE_HANDLE *pdev , - uint8_t ep_addr, - uint16_t ep_mps, - uint8_t ep_type); - -uint32_t DCD_EP_Close (USB_OTG_CORE_HANDLE *pdev, - uint8_t ep_addr); - - -uint32_t DCD_EP_PrepareRx ( USB_OTG_CORE_HANDLE *pdev, - uint8_t ep_addr, - uint8_t *pbuf, - uint16_t buf_len); - -uint32_t DCD_EP_Tx (USB_OTG_CORE_HANDLE *pdev, - uint8_t ep_addr, - uint8_t *pbuf, - uint32_t buf_len); -uint32_t DCD_EP_Stall (USB_OTG_CORE_HANDLE *pdev, - uint8_t epnum); -uint32_t DCD_EP_ClrStall (USB_OTG_CORE_HANDLE *pdev, - uint8_t epnum); -uint32_t DCD_EP_Flush (USB_OTG_CORE_HANDLE *pdev, - uint8_t epnum); -uint32_t DCD_Handle_ISR(USB_OTG_CORE_HANDLE *pdev); - -uint32_t DCD_GetEPStatus(USB_OTG_CORE_HANDLE *pdev , - uint8_t epnum); - -void DCD_SetEPStatus (USB_OTG_CORE_HANDLE *pdev , - uint8_t epnum , - uint32_t Status); - -/** -* @} -*/ - - -#endif //__DCD_H__ - - -/** -* @} -*/ - -/** -* @} -*/ -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ - diff --git a/stm/lib/usb_dcd_int.c b/stm/lib/usb_dcd_int.c deleted file mode 100644 index 4dd9ce839..000000000 --- a/stm/lib/usb_dcd_int.c +++ /dev/null @@ -1,879 +0,0 @@ -/** - ****************************************************************************** - * @file usb_dcd_int.c - * @author MCD Application Team - * @version V2.1.0 - * @date 19-March-2012 - * @brief Peripheral Device interrupt subroutines - ****************************************************************************** - * @attention - * - *

© COPYRIGHT 2012 STMicroelectronics

- * - * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License"); - * You may not use this file except in compliance with the License. - * You may obtain a copy of the License at: - * - * http://www.st.com/software_license_agreement_liberty_v2 - * - * Unless required by applicable law or agreed to in writing, software - * distributed under the License is distributed on an "AS IS" BASIS, - * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - * See the License for the specific language governing permissions and - * limitations under the License. - * - ****************************************************************************** - */ - -/* Includes ------------------------------------------------------------------*/ -#include "usb_dcd_int.h" -/** @addtogroup USB_OTG_DRIVER -* @{ -*/ - -/** @defgroup USB_DCD_INT -* @brief This file contains the interrupt subroutines for the Device mode. -* @{ -*/ - - -/** @defgroup USB_DCD_INT_Private_Defines -* @{ -*/ -/** -* @} -*/ - - -/** @defgroup USB_DCD_INT_Private_TypesDefinitions -* @{ -*/ -/** -* @} -*/ - - - -/** @defgroup USB_DCD_INT_Private_Macros -* @{ -*/ -/** -* @} -*/ - - -/** @defgroup USB_DCD_INT_Private_Variables -* @{ -*/ -/** -* @} -*/ - - -/** @defgroup USB_DCD_INT_Private_FunctionPrototypes -* @{ -*/ -/* static functions */ -static uint32_t DCD_ReadDevInEP (USB_OTG_CORE_HANDLE *pdev, uint8_t epnum); - -/* Interrupt Handlers */ -static uint32_t DCD_HandleInEP_ISR(USB_OTG_CORE_HANDLE *pdev); -static uint32_t DCD_HandleOutEP_ISR(USB_OTG_CORE_HANDLE *pdev); -static uint32_t DCD_HandleSof_ISR(USB_OTG_CORE_HANDLE *pdev); - -static uint32_t DCD_HandleRxStatusQueueLevel_ISR(USB_OTG_CORE_HANDLE *pdev); -static uint32_t DCD_WriteEmptyTxFifo(USB_OTG_CORE_HANDLE *pdev , uint32_t epnum); - -static uint32_t DCD_HandleUsbReset_ISR(USB_OTG_CORE_HANDLE *pdev); -static uint32_t DCD_HandleEnumDone_ISR(USB_OTG_CORE_HANDLE *pdev); -static uint32_t DCD_HandleResume_ISR(USB_OTG_CORE_HANDLE *pdev); -static uint32_t DCD_HandleUSBSuspend_ISR(USB_OTG_CORE_HANDLE *pdev); - -static uint32_t DCD_IsoINIncomplete_ISR(USB_OTG_CORE_HANDLE *pdev); -static uint32_t DCD_IsoOUTIncomplete_ISR(USB_OTG_CORE_HANDLE *pdev); -#ifdef VBUS_SENSING_ENABLED -static uint32_t DCD_SessionRequest_ISR(USB_OTG_CORE_HANDLE *pdev); -static uint32_t DCD_OTG_ISR(USB_OTG_CORE_HANDLE *pdev); -#endif - -/** -* @} -*/ - - -/** @defgroup USB_DCD_INT_Private_Functions -* @{ -*/ - - -#ifdef USB_OTG_HS_DEDICATED_EP1_ENABLED -/** -* @brief USBD_OTG_EP1OUT_ISR_Handler -* handles all USB Interrupts -* @param pdev: device instance -* @retval status -*/ -uint32_t USBD_OTG_EP1OUT_ISR_Handler (USB_OTG_CORE_HANDLE *pdev) -{ - - USB_OTG_DOEPINTn_TypeDef doepint; - USB_OTG_DEPXFRSIZ_TypeDef deptsiz; - - doepint.d32 = USB_OTG_READ_REG32(&pdev->regs.OUTEP_REGS[1]->DOEPINT); - doepint.d32&= USB_OTG_READ_REG32(&pdev->regs.DREGS->DOUTEP1MSK); - - /* Transfer complete */ - if ( doepint.b.xfercompl ) - { - /* Clear the bit in DOEPINTn for this interrupt */ - CLEAR_OUT_EP_INTR(1, xfercompl); - if (pdev->cfg.dma_enable == 1) - { - deptsiz.d32 = USB_OTG_READ_REG32(&(pdev->regs.OUTEP_REGS[1]->DOEPTSIZ)); - /*ToDo : handle more than one single MPS size packet */ - pdev->dev.out_ep[1].xfer_count = pdev->dev.out_ep[1].maxpacket - \ - deptsiz.b.xfersize; - } - /* Inform upper layer: data ready */ - /* RX COMPLETE */ - USBD_DCD_INT_fops->DataOutStage(pdev , 1); - - } - - /* Endpoint disable */ - if ( doepint.b.epdisabled ) - { - /* Clear the bit in DOEPINTn for this interrupt */ - CLEAR_OUT_EP_INTR(1, epdisabled); - } - - return 1; -} - -/** -* @brief USBD_OTG_EP1IN_ISR_Handler -* handles all USB Interrupts -* @param pdev: device instance -* @retval status -*/ -uint32_t USBD_OTG_EP1IN_ISR_Handler (USB_OTG_CORE_HANDLE *pdev) -{ - - USB_OTG_DIEPINTn_TypeDef diepint; - uint32_t fifoemptymsk, msk, emp; - - msk = USB_OTG_READ_REG32(&pdev->regs.DREGS->DINEP1MSK); - emp = USB_OTG_READ_REG32(&pdev->regs.DREGS->DIEPEMPMSK); - msk |= ((emp >> 1 ) & 0x1) << 7; - diepint.d32 = USB_OTG_READ_REG32(&pdev->regs.INEP_REGS[1]->DIEPINT) & msk; - - if ( diepint.b.xfercompl ) - { - fifoemptymsk = 0x1 << 1; - USB_OTG_MODIFY_REG32(&pdev->regs.DREGS->DIEPEMPMSK, fifoemptymsk, 0); - CLEAR_IN_EP_INTR(1, xfercompl); - /* TX COMPLETE */ - USBD_DCD_INT_fops->DataInStage(pdev , 1); - } - if ( diepint.b.epdisabled ) - { - CLEAR_IN_EP_INTR(1, epdisabled); - } - if ( diepint.b.timeout ) - { - CLEAR_IN_EP_INTR(1, timeout); - } - if (diepint.b.intktxfemp) - { - CLEAR_IN_EP_INTR(1, intktxfemp); - } - if (diepint.b.inepnakeff) - { - CLEAR_IN_EP_INTR(1, inepnakeff); - } - if (diepint.b.emptyintr) - { - DCD_WriteEmptyTxFifo(pdev , 1); - CLEAR_IN_EP_INTR(1, emptyintr); - } - return 1; -} -#endif - -/** -* @brief STM32_USBF_OTG_ISR_Handler -* handles all USB Interrupts -* @param pdev: device instance -* @retval status -*/ -uint32_t USBD_OTG_ISR_Handler (USB_OTG_CORE_HANDLE *pdev) -{ - USB_OTG_GINTSTS_TypeDef gintr_status; - uint32_t retval = 0; - - if (USB_OTG_IsDeviceMode(pdev)) /* ensure that we are in device mode */ - { - gintr_status.d32 = USB_OTG_ReadCoreItr(pdev); - if (!gintr_status.d32) /* avoid spurious interrupt */ - { - return 0; - } - - if (gintr_status.b.outepintr) - { - retval |= DCD_HandleOutEP_ISR(pdev); - } - - if (gintr_status.b.inepint) - { - retval |= DCD_HandleInEP_ISR(pdev); - } - - if (gintr_status.b.modemismatch) - { - USB_OTG_GINTSTS_TypeDef gintsts; - - /* Clear interrupt */ - gintsts.d32 = 0; - gintsts.b.modemismatch = 1; - USB_OTG_WRITE_REG32(&pdev->regs.GREGS->GINTSTS, gintsts.d32); - } - - if (gintr_status.b.wkupintr) - { - retval |= DCD_HandleResume_ISR(pdev); - } - - if (gintr_status.b.usbsuspend) - { - retval |= DCD_HandleUSBSuspend_ISR(pdev); - } - if (gintr_status.b.sofintr) - { - retval |= DCD_HandleSof_ISR(pdev); - - } - - if (gintr_status.b.rxstsqlvl) - { - retval |= DCD_HandleRxStatusQueueLevel_ISR(pdev); - - } - - if (gintr_status.b.usbreset) - { - retval |= DCD_HandleUsbReset_ISR(pdev); - - } - if (gintr_status.b.enumdone) - { - retval |= DCD_HandleEnumDone_ISR(pdev); - } - - if (gintr_status.b.incomplisoin) - { - retval |= DCD_IsoINIncomplete_ISR(pdev); - } - - if (gintr_status.b.incomplisoout) - { - retval |= DCD_IsoOUTIncomplete_ISR(pdev); - } -#ifdef VBUS_SENSING_ENABLED - if (gintr_status.b.sessreqintr) - { - retval |= DCD_SessionRequest_ISR(pdev); - } - - if (gintr_status.b.otgintr) - { - retval |= DCD_OTG_ISR(pdev); - } -#endif - } - return retval; -} - -#ifdef VBUS_SENSING_ENABLED -/** -* @brief DCD_SessionRequest_ISR -* Indicates that the USB_OTG controller has detected a connection -* @param pdev: device instance -* @retval status -*/ -static uint32_t DCD_SessionRequest_ISR(USB_OTG_CORE_HANDLE *pdev) -{ - USB_OTG_GINTSTS_TypeDef gintsts; - USBD_DCD_INT_fops->DevConnected (pdev); - - /* Clear interrupt */ - gintsts.d32 = 0; - gintsts.b.sessreqintr = 1; - USB_OTG_WRITE_REG32 (&pdev->regs.GREGS->GINTSTS, gintsts.d32); - return 1; -} - -/** -* @brief DCD_OTG_ISR -* Indicates that the USB_OTG controller has detected an OTG event: -* used to detect the end of session i.e. disconnection -* @param pdev: device instance -* @retval status -*/ -static uint32_t DCD_OTG_ISR(USB_OTG_CORE_HANDLE *pdev) -{ - - USB_OTG_GOTGINT_TypeDef gotgint; - - gotgint.d32 = USB_OTG_READ_REG32(&pdev->regs.GREGS->GOTGINT); - - if (gotgint.b.sesenddet) - { - USBD_DCD_INT_fops->DevDisconnected (pdev); - } - /* Clear OTG interrupt */ - USB_OTG_WRITE_REG32(&pdev->regs.GREGS->GOTGINT, gotgint.d32); - return 1; -} -#endif -/** -* @brief DCD_HandleResume_ISR -* Indicates that the USB_OTG controller has detected a resume or -* remote Wake-up sequence -* @param pdev: device instance -* @retval status -*/ -static uint32_t DCD_HandleResume_ISR(USB_OTG_CORE_HANDLE *pdev) -{ - USB_OTG_GINTSTS_TypeDef gintsts; - USB_OTG_DCTL_TypeDef devctl; - USB_OTG_PCGCCTL_TypeDef power; - - if(pdev->cfg.low_power) - { - /* un-gate USB Core clock */ - power.d32 = USB_OTG_READ_REG32(pdev->regs.PCGCCTL); - power.b.gatehclk = 0; - power.b.stoppclk = 0; - USB_OTG_WRITE_REG32(pdev->regs.PCGCCTL, power.d32); - } - - /* Clear the Remote Wake-up Signaling */ - devctl.d32 = 0; - devctl.b.rmtwkupsig = 1; - USB_OTG_MODIFY_REG32(&pdev->regs.DREGS->DCTL, devctl.d32, 0); - - /* Inform upper layer by the Resume Event */ - USBD_DCD_INT_fops->Resume (pdev); - - /* Clear interrupt */ - gintsts.d32 = 0; - gintsts.b.wkupintr = 1; - USB_OTG_WRITE_REG32 (&pdev->regs.GREGS->GINTSTS, gintsts.d32); - return 1; -} - -/** -* @brief USB_OTG_HandleUSBSuspend_ISR -* Indicates that SUSPEND state has been detected on the USB -* @param pdev: device instance -* @retval status -*/ -static uint32_t DCD_HandleUSBSuspend_ISR(USB_OTG_CORE_HANDLE *pdev) -{ - USB_OTG_GINTSTS_TypeDef gintsts; - USB_OTG_PCGCCTL_TypeDef power; - USB_OTG_DSTS_TypeDef dsts; - __IO uint8_t prev_status = 0; - - prev_status = pdev->dev.device_status; - USBD_DCD_INT_fops->Suspend (pdev); - - dsts.d32 = USB_OTG_READ_REG32(&pdev->regs.DREGS->DSTS); - - /* Clear interrupt */ - gintsts.d32 = 0; - gintsts.b.usbsuspend = 1; - USB_OTG_WRITE_REG32(&pdev->regs.GREGS->GINTSTS, gintsts.d32); - - if((pdev->cfg.low_power) && (dsts.b.suspsts == 1) && - (pdev->dev.connection_status == 1) && - (prev_status == USB_OTG_CONFIGURED)) - { - /* switch-off the clocks */ - power.d32 = 0; - power.b.stoppclk = 1; - USB_OTG_MODIFY_REG32(pdev->regs.PCGCCTL, 0, power.d32); - - power.b.gatehclk = 1; - USB_OTG_MODIFY_REG32(pdev->regs.PCGCCTL, 0, power.d32); - - /* Request to enter Sleep mode after exit from current ISR */ - SCB->SCR |= (SCB_SCR_SLEEPDEEP_Msk | SCB_SCR_SLEEPONEXIT_Msk); - } - return 1; -} - -/** -* @brief DCD_HandleInEP_ISR -* Indicates that an IN EP has a pending Interrupt -* @param pdev: device instance -* @retval status -*/ -static uint32_t DCD_HandleInEP_ISR(USB_OTG_CORE_HANDLE *pdev) -{ - USB_OTG_DIEPINTn_TypeDef diepint; - - uint32_t ep_intr; - uint32_t epnum = 0; - uint32_t fifoemptymsk; - diepint.d32 = 0; - ep_intr = USB_OTG_ReadDevAllInEPItr(pdev); - - while ( ep_intr ) - { - if (ep_intr&0x1) /* In ITR */ - { - diepint.d32 = DCD_ReadDevInEP(pdev , epnum); /* Get In ITR status */ - if ( diepint.b.xfercompl ) - { - fifoemptymsk = 0x1 << epnum; - USB_OTG_MODIFY_REG32(&pdev->regs.DREGS->DIEPEMPMSK, fifoemptymsk, 0); - CLEAR_IN_EP_INTR(epnum, xfercompl); - /* TX COMPLETE */ - USBD_DCD_INT_fops->DataInStage(pdev , epnum); - - if (pdev->cfg.dma_enable == 1) - { - if((epnum == 0) && (pdev->dev.device_state == USB_OTG_EP0_STATUS_IN)) - { - /* prepare to rx more setup packets */ - USB_OTG_EP0_OutStart(pdev); - } - } - } - if ( diepint.b.timeout ) - { - CLEAR_IN_EP_INTR(epnum, timeout); - } - if (diepint.b.intktxfemp) - { - CLEAR_IN_EP_INTR(epnum, intktxfemp); - } - if (diepint.b.inepnakeff) - { - CLEAR_IN_EP_INTR(epnum, inepnakeff); - } - if ( diepint.b.epdisabled ) - { - CLEAR_IN_EP_INTR(epnum, epdisabled); - } - if (diepint.b.emptyintr) - { - - DCD_WriteEmptyTxFifo(pdev , epnum); - - CLEAR_IN_EP_INTR(epnum, emptyintr); - } - } - epnum++; - ep_intr >>= 1; - } - - return 1; -} - -/** -* @brief DCD_HandleOutEP_ISR -* Indicates that an OUT EP has a pending Interrupt -* @param pdev: device instance -* @retval status -*/ -static uint32_t DCD_HandleOutEP_ISR(USB_OTG_CORE_HANDLE *pdev) -{ - uint32_t ep_intr; - USB_OTG_DOEPINTn_TypeDef doepint; - USB_OTG_DEPXFRSIZ_TypeDef deptsiz; - uint32_t epnum = 0; - - doepint.d32 = 0; - - /* Read in the device interrupt bits */ - ep_intr = USB_OTG_ReadDevAllOutEp_itr(pdev); - - while ( ep_intr ) - { - if (ep_intr&0x1) - { - - doepint.d32 = USB_OTG_ReadDevOutEP_itr(pdev, epnum); - - /* Transfer complete */ - if ( doepint.b.xfercompl ) - { - /* Clear the bit in DOEPINTn for this interrupt */ - CLEAR_OUT_EP_INTR(epnum, xfercompl); - if (pdev->cfg.dma_enable == 1) - { - deptsiz.d32 = USB_OTG_READ_REG32(&(pdev->regs.OUTEP_REGS[epnum]->DOEPTSIZ)); - /*ToDo : handle more than one single MPS size packet */ - pdev->dev.out_ep[epnum].xfer_count = pdev->dev.out_ep[epnum].maxpacket - \ - deptsiz.b.xfersize; - } - /* Inform upper layer: data ready */ - /* RX COMPLETE */ - USBD_DCD_INT_fops->DataOutStage(pdev , epnum); - - if (pdev->cfg.dma_enable == 1) - { - if((epnum == 0) && (pdev->dev.device_state == USB_OTG_EP0_STATUS_OUT)) - { - /* prepare to rx more setup packets */ - USB_OTG_EP0_OutStart(pdev); - } - } - } - /* Endpoint disable */ - if ( doepint.b.epdisabled ) - { - /* Clear the bit in DOEPINTn for this interrupt */ - CLEAR_OUT_EP_INTR(epnum, epdisabled); - } - /* Setup Phase Done (control EPs) */ - if ( doepint.b.setup ) - { - - /* inform the upper layer that a setup packet is available */ - /* SETUP COMPLETE */ - USBD_DCD_INT_fops->SetupStage(pdev); - CLEAR_OUT_EP_INTR(epnum, setup); - } - } - epnum++; - ep_intr >>= 1; - } - return 1; -} - -/** -* @brief DCD_HandleSof_ISR -* Handles the SOF Interrupts -* @param pdev: device instance -* @retval status -*/ -static uint32_t DCD_HandleSof_ISR(USB_OTG_CORE_HANDLE *pdev) -{ - USB_OTG_GINTSTS_TypeDef GINTSTS; - - - USBD_DCD_INT_fops->SOF(pdev); - - /* Clear interrupt */ - GINTSTS.d32 = 0; - GINTSTS.b.sofintr = 1; - USB_OTG_WRITE_REG32 (&pdev->regs.GREGS->GINTSTS, GINTSTS.d32); - - return 1; -} - -/** -* @brief DCD_HandleRxStatusQueueLevel_ISR -* Handles the Rx Status Queue Level Interrupt -* @param pdev: device instance -* @retval status -*/ -static uint32_t DCD_HandleRxStatusQueueLevel_ISR(USB_OTG_CORE_HANDLE *pdev) -{ - USB_OTG_GINTMSK_TypeDef int_mask; - USB_OTG_DRXSTS_TypeDef status; - USB_OTG_EP *ep; - - /* Disable the Rx Status Queue Level interrupt */ - int_mask.d32 = 0; - int_mask.b.rxstsqlvl = 1; - USB_OTG_MODIFY_REG32( &pdev->regs.GREGS->GINTMSK, int_mask.d32, 0); - - /* Get the Status from the top of the FIFO */ - status.d32 = USB_OTG_READ_REG32( &pdev->regs.GREGS->GRXSTSP ); - - ep = &pdev->dev.out_ep[status.b.epnum]; - - switch (status.b.pktsts) - { - case STS_GOUT_NAK: - break; - case STS_DATA_UPDT: - if (status.b.bcnt) - { - USB_OTG_ReadPacket(pdev,ep->xfer_buff, status.b.bcnt); - ep->xfer_buff += status.b.bcnt; - ep->xfer_count += status.b.bcnt; - } - break; - case STS_XFER_COMP: - break; - case STS_SETUP_COMP: - break; - case STS_SETUP_UPDT: - /* Copy the setup packet received in FIFO into the setup buffer in RAM */ - USB_OTG_ReadPacket(pdev , pdev->dev.setup_packet, 8); - ep->xfer_count += status.b.bcnt; - break; - default: - break; - } - - /* Enable the Rx Status Queue Level interrupt */ - USB_OTG_MODIFY_REG32( &pdev->regs.GREGS->GINTMSK, 0, int_mask.d32); - - return 1; -} - -/** -* @brief DCD_WriteEmptyTxFifo -* check FIFO for the next packet to be loaded -* @param pdev: device instance -* @retval status -*/ -static uint32_t DCD_WriteEmptyTxFifo(USB_OTG_CORE_HANDLE *pdev, uint32_t epnum) -{ - USB_OTG_DTXFSTSn_TypeDef txstatus; - USB_OTG_EP *ep; - uint32_t len = 0; - uint32_t len32b; - txstatus.d32 = 0; - - ep = &pdev->dev.in_ep[epnum]; - - len = ep->xfer_len - ep->xfer_count; - - if (len > ep->maxpacket) - { - len = ep->maxpacket; - } - - len32b = (len + 3) / 4; - txstatus.d32 = USB_OTG_READ_REG32( &pdev->regs.INEP_REGS[epnum]->DTXFSTS); - - - - while (txstatus.b.txfspcavail > len32b && - ep->xfer_count < ep->xfer_len && - ep->xfer_len != 0) - { - /* Write the FIFO */ - len = ep->xfer_len - ep->xfer_count; - - if (len > ep->maxpacket) - { - len = ep->maxpacket; - } - len32b = (len + 3) / 4; - - USB_OTG_WritePacket (pdev , ep->xfer_buff, epnum, len); - - ep->xfer_buff += len; - ep->xfer_count += len; - - // this code turns off the "empty interrupt" - // without it the USB is subject to perpetual interrupts - // see my.st.com, "Yet another STM32F105/7 USB OTG driver issue (VCP device)" - // this code might also work if put in DCD_HandleInEP_ISR - if (ep->xfer_count >= ep->xfer_len) { - uint32_t fifoemptymsk = 1 << ep->num; - USB_OTG_MODIFY_REG32(&pdev->regs.DREGS->DIEPEMPMSK, fifoemptymsk, 0); - break; - } - - txstatus.d32 = USB_OTG_READ_REG32(&pdev->regs.INEP_REGS[epnum]->DTXFSTS); - } - - return 1; -} - -/** -* @brief DCD_HandleUsbReset_ISR -* This interrupt occurs when a USB Reset is detected -* @param pdev: device instance -* @retval status -*/ -static uint32_t DCD_HandleUsbReset_ISR(USB_OTG_CORE_HANDLE *pdev) -{ - USB_OTG_DAINT_TypeDef daintmsk; - USB_OTG_DOEPMSK_TypeDef doepmsk; - USB_OTG_DIEPMSK_TypeDef diepmsk; - USB_OTG_DCFG_TypeDef dcfg; - USB_OTG_DCTL_TypeDef dctl; - USB_OTG_GINTSTS_TypeDef gintsts; - uint32_t i; - - dctl.d32 = 0; - daintmsk.d32 = 0; - doepmsk.d32 = 0; - diepmsk.d32 = 0; - dcfg.d32 = 0; - gintsts.d32 = 0; - - /* Clear the Remote Wake-up Signaling */ - dctl.b.rmtwkupsig = 1; - USB_OTG_MODIFY_REG32(&pdev->regs.DREGS->DCTL, dctl.d32, 0 ); - - /* Flush the Tx FIFO */ - USB_OTG_FlushTxFifo(pdev , 0 ); - - for (i = 0; i < pdev->cfg.dev_endpoints ; i++) - { - USB_OTG_WRITE_REG32( &pdev->regs.INEP_REGS[i]->DIEPINT, 0xFF); - USB_OTG_WRITE_REG32( &pdev->regs.OUTEP_REGS[i]->DOEPINT, 0xFF); - } - USB_OTG_WRITE_REG32( &pdev->regs.DREGS->DAINT, 0xFFFFFFFF ); - - daintmsk.ep.in = 1; - daintmsk.ep.out = 1; - USB_OTG_WRITE_REG32( &pdev->regs.DREGS->DAINTMSK, daintmsk.d32 ); - - doepmsk.b.setup = 1; - doepmsk.b.xfercompl = 1; - doepmsk.b.epdisabled = 1; - USB_OTG_WRITE_REG32( &pdev->regs.DREGS->DOEPMSK, doepmsk.d32 ); -#ifdef USB_OTG_HS_DEDICATED_EP1_ENABLED - USB_OTG_WRITE_REG32( &pdev->regs.DREGS->DOUTEP1MSK, doepmsk.d32 ); -#endif - diepmsk.b.xfercompl = 1; - diepmsk.b.timeout = 1; - diepmsk.b.epdisabled = 1; - - USB_OTG_WRITE_REG32( &pdev->regs.DREGS->DIEPMSK, diepmsk.d32 ); -#ifdef USB_OTG_HS_DEDICATED_EP1_ENABLED - USB_OTG_WRITE_REG32( &pdev->regs.DREGS->DINEP1MSK, diepmsk.d32 ); -#endif - /* Reset Device Address */ - dcfg.d32 = USB_OTG_READ_REG32( &pdev->regs.DREGS->DCFG); - dcfg.b.devaddr = 0; - USB_OTG_WRITE_REG32( &pdev->regs.DREGS->DCFG, dcfg.d32); - - - /* setup EP0 to receive SETUP packets */ - USB_OTG_EP0_OutStart(pdev); - - /* Clear interrupt */ - gintsts.d32 = 0; - gintsts.b.usbreset = 1; - USB_OTG_WRITE_REG32 (&pdev->regs.GREGS->GINTSTS, gintsts.d32); - - /*Reset internal state machine */ - USBD_DCD_INT_fops->Reset(pdev); - return 1; -} - -/** -* @brief DCD_HandleEnumDone_ISR -* Read the device status register and set the device speed -* @param pdev: device instance -* @retval status -*/ -static uint32_t DCD_HandleEnumDone_ISR(USB_OTG_CORE_HANDLE *pdev) -{ - USB_OTG_GINTSTS_TypeDef gintsts; - USB_OTG_GUSBCFG_TypeDef gusbcfg; - - USB_OTG_EP0Activate(pdev); - - /* Set USB turn-around time based on device speed and PHY interface. */ - gusbcfg.d32 = USB_OTG_READ_REG32(&pdev->regs.GREGS->GUSBCFG); - - /* Full or High speed */ - if ( USB_OTG_GetDeviceSpeed(pdev) == USB_SPEED_HIGH) - { - pdev->cfg.speed = USB_OTG_SPEED_HIGH; - pdev->cfg.mps = USB_OTG_HS_MAX_PACKET_SIZE ; - gusbcfg.b.usbtrdtim = 9; - } - else - { - pdev->cfg.speed = USB_OTG_SPEED_FULL; - pdev->cfg.mps = USB_OTG_FS_MAX_PACKET_SIZE ; - gusbcfg.b.usbtrdtim = 5; - } - - USB_OTG_WRITE_REG32(&pdev->regs.GREGS->GUSBCFG, gusbcfg.d32); - - /* Clear interrupt */ - gintsts.d32 = 0; - gintsts.b.enumdone = 1; - USB_OTG_WRITE_REG32( &pdev->regs.GREGS->GINTSTS, gintsts.d32 ); - return 1; -} - - -/** -* @brief DCD_IsoINIncomplete_ISR -* handle the ISO IN incomplete interrupt -* @param pdev: device instance -* @retval status -*/ -static uint32_t DCD_IsoINIncomplete_ISR(USB_OTG_CORE_HANDLE *pdev) -{ - USB_OTG_GINTSTS_TypeDef gintsts; - - gintsts.d32 = 0; - - USBD_DCD_INT_fops->IsoINIncomplete (pdev); - - /* Clear interrupt */ - gintsts.b.incomplisoin = 1; - USB_OTG_WRITE_REG32(&pdev->regs.GREGS->GINTSTS, gintsts.d32); - - return 1; -} - -/** -* @brief DCD_IsoOUTIncomplete_ISR -* handle the ISO OUT incomplete interrupt -* @param pdev: device instance -* @retval status -*/ -static uint32_t DCD_IsoOUTIncomplete_ISR(USB_OTG_CORE_HANDLE *pdev) -{ - USB_OTG_GINTSTS_TypeDef gintsts; - - gintsts.d32 = 0; - - USBD_DCD_INT_fops->IsoOUTIncomplete (pdev); - - /* Clear interrupt */ - gintsts.b.incomplisoout = 1; - USB_OTG_WRITE_REG32(&pdev->regs.GREGS->GINTSTS, gintsts.d32); - return 1; -} -/** -* @brief DCD_ReadDevInEP -* Reads ep flags -* @param pdev: device instance -* @retval status -*/ -static uint32_t DCD_ReadDevInEP (USB_OTG_CORE_HANDLE *pdev, uint8_t epnum) -{ - uint32_t v, msk, emp; - msk = USB_OTG_READ_REG32(&pdev->regs.DREGS->DIEPMSK); - emp = USB_OTG_READ_REG32(&pdev->regs.DREGS->DIEPEMPMSK); - msk |= ((emp >> epnum) & 0x1) << 7; - v = USB_OTG_READ_REG32(&pdev->regs.INEP_REGS[epnum]->DIEPINT) & msk; - return v; -} - - - -/** -* @} -*/ - -/** -* @} -*/ - -/** -* @} -*/ - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/stm/lib/usb_dcd_int.h b/stm/lib/usb_dcd_int.h deleted file mode 100644 index e2369e5dd..000000000 --- a/stm/lib/usb_dcd_int.h +++ /dev/null @@ -1,127 +0,0 @@ -/** - ****************************************************************************** - * @file usb_dcd_int.h - * @author MCD Application Team - * @version V2.1.0 - * @date 19-March-2012 - * @brief Peripheral Device Interface Layer - ****************************************************************************** - * @attention - * - *

© COPYRIGHT 2012 STMicroelectronics

- * - * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License"); - * You may not use this file except in compliance with the License. - * You may obtain a copy of the License at: - * - * http://www.st.com/software_license_agreement_liberty_v2 - * - * Unless required by applicable law or agreed to in writing, software - * distributed under the License is distributed on an "AS IS" BASIS, - * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - * See the License for the specific language governing permissions and - * limitations under the License. - * - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef USB_DCD_INT_H__ -#define USB_DCD_INT_H__ - -/* Includes ------------------------------------------------------------------*/ -#include "usb_dcd.h" - - - -/** @addtogroup USB_OTG_DRIVER - * @{ - */ - -/** @defgroup USB_DCD_INT - * @brief This file is the - * @{ - */ - - -/** @defgroup USB_DCD_INT_Exported_Defines - * @{ - */ - -typedef struct _USBD_DCD_INT -{ - uint8_t (* DataOutStage) (USB_OTG_CORE_HANDLE *pdev , uint8_t epnum); - uint8_t (* DataInStage) (USB_OTG_CORE_HANDLE *pdev , uint8_t epnum); - uint8_t (* SetupStage) (USB_OTG_CORE_HANDLE *pdev); - uint8_t (* SOF) (USB_OTG_CORE_HANDLE *pdev); - uint8_t (* Reset) (USB_OTG_CORE_HANDLE *pdev); - uint8_t (* Suspend) (USB_OTG_CORE_HANDLE *pdev); - uint8_t (* Resume) (USB_OTG_CORE_HANDLE *pdev); - uint8_t (* IsoINIncomplete) (USB_OTG_CORE_HANDLE *pdev); - uint8_t (* IsoOUTIncomplete) (USB_OTG_CORE_HANDLE *pdev); - - uint8_t (* DevConnected) (USB_OTG_CORE_HANDLE *pdev); - uint8_t (* DevDisconnected) (USB_OTG_CORE_HANDLE *pdev); - -}USBD_DCD_INT_cb_TypeDef; - -extern USBD_DCD_INT_cb_TypeDef *USBD_DCD_INT_fops; -/** - * @} - */ - - -/** @defgroup USB_DCD_INT_Exported_Types - * @{ - */ -/** - * @} - */ - -/** @defgroup USB_DCD_INT_Exported_Macros - * @{ - */ - -#define CLEAR_IN_EP_INTR(epnum,intr) \ - diepint.d32=0; \ - diepint.b.intr = 1; \ - USB_OTG_WRITE_REG32(&pdev->regs.INEP_REGS[epnum]->DIEPINT,diepint.d32); - -#define CLEAR_OUT_EP_INTR(epnum,intr) \ - doepint.d32=0; \ - doepint.b.intr = 1; \ - USB_OTG_WRITE_REG32(&pdev->regs.OUTEP_REGS[epnum]->DOEPINT,doepint.d32); - -/** - * @} - */ - -/** @defgroup USB_DCD_INT_Exported_Variables - * @{ - */ -/** - * @} - */ - -/** @defgroup USB_DCD_INT_Exported_FunctionsPrototype - * @{ - */ - -uint32_t USBD_OTG_ISR_Handler (USB_OTG_CORE_HANDLE *pdev); - -/** - * @} - */ - - -#endif // USB_DCD_INT_H__ - -/** - * @} - */ - -/** - * @} - */ -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ - diff --git a/stm/lib/usb_defines.h b/stm/lib/usb_defines.h deleted file mode 100644 index 28e6d1687..000000000 --- a/stm/lib/usb_defines.h +++ /dev/null @@ -1,249 +0,0 @@ -/** - ****************************************************************************** - * @file usb_defines.h - * @author MCD Application Team - * @version V2.1.0 - * @date 19-March-2012 - * @brief Header of the Core Layer - ****************************************************************************** - * @attention - * - *

© COPYRIGHT 2012 STMicroelectronics

- * - * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License"); - * You may not use this file except in compliance with the License. - * You may obtain a copy of the License at: - * - * http://www.st.com/software_license_agreement_liberty_v2 - * - * Unless required by applicable law or agreed to in writing, software - * distributed under the License is distributed on an "AS IS" BASIS, - * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - * See the License for the specific language governing permissions and - * limitations under the License. - * - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __USB_DEF_H__ -#define __USB_DEF_H__ - -/* Includes ------------------------------------------------------------------*/ -#include "usb_conf.h" - -/** @addtogroup USB_OTG_DRIVER - * @{ - */ - -/** @defgroup USB_DEFINES - * @brief This file is the - * @{ - */ - - -/** @defgroup USB_DEFINES_Exported_Defines - * @{ - */ -/** - * @} - */ - - -/** @defgroup _CORE_DEFINES_ - * @{ - */ - -#define USB_OTG_SPEED_PARAM_HIGH 0 -#define USB_OTG_SPEED_PARAM_HIGH_IN_FULL 1 -#define USB_OTG_SPEED_PARAM_FULL 3 - -#define USB_OTG_SPEED_HIGH 0 -#define USB_OTG_SPEED_FULL 1 - -#define USB_OTG_ULPI_PHY 1 -#define USB_OTG_EMBEDDED_PHY 2 - -/** - * @} - */ - - -/** @defgroup _GLOBAL_DEFINES_ - * @{ - */ -#define GAHBCFG_TXFEMPTYLVL_EMPTY 1 -#define GAHBCFG_TXFEMPTYLVL_HALFEMPTY 0 -#define GAHBCFG_GLBINT_ENABLE 1 -#define GAHBCFG_INT_DMA_BURST_SINGLE 0 -#define GAHBCFG_INT_DMA_BURST_INCR 1 -#define GAHBCFG_INT_DMA_BURST_INCR4 3 -#define GAHBCFG_INT_DMA_BURST_INCR8 5 -#define GAHBCFG_INT_DMA_BURST_INCR16 7 -#define GAHBCFG_DMAENABLE 1 -#define GAHBCFG_TXFEMPTYLVL_EMPTY 1 -#define GAHBCFG_TXFEMPTYLVL_HALFEMPTY 0 -#define GRXSTS_PKTSTS_IN 2 -#define GRXSTS_PKTSTS_IN_XFER_COMP 3 -#define GRXSTS_PKTSTS_DATA_TOGGLE_ERR 5 -#define GRXSTS_PKTSTS_CH_HALTED 7 -/** - * @} - */ - - -/** @defgroup _OnTheGo_DEFINES_ - * @{ - */ -#define MODE_HNP_SRP_CAPABLE 0 -#define MODE_SRP_ONLY_CAPABLE 1 -#define MODE_NO_HNP_SRP_CAPABLE 2 -#define MODE_SRP_CAPABLE_DEVICE 3 -#define MODE_NO_SRP_CAPABLE_DEVICE 4 -#define MODE_SRP_CAPABLE_HOST 5 -#define MODE_NO_SRP_CAPABLE_HOST 6 -#define A_HOST 1 -#define A_SUSPEND 2 -#define A_PERIPHERAL 3 -#define B_PERIPHERAL 4 -#define B_HOST 5 -#define DEVICE_MODE 0 -#define HOST_MODE 1 -#define OTG_MODE 2 -/** - * @} - */ - - -/** @defgroup __DEVICE_DEFINES_ - * @{ - */ -#define DSTS_ENUMSPD_HS_PHY_30MHZ_OR_60MHZ 0 -#define DSTS_ENUMSPD_FS_PHY_30MHZ_OR_60MHZ 1 -#define DSTS_ENUMSPD_LS_PHY_6MHZ 2 -#define DSTS_ENUMSPD_FS_PHY_48MHZ 3 - -#define DCFG_FRAME_INTERVAL_80 0 -#define DCFG_FRAME_INTERVAL_85 1 -#define DCFG_FRAME_INTERVAL_90 2 -#define DCFG_FRAME_INTERVAL_95 3 - -#define DEP0CTL_MPS_64 0 -#define DEP0CTL_MPS_32 1 -#define DEP0CTL_MPS_16 2 -#define DEP0CTL_MPS_8 3 - -#define EP_SPEED_LOW 0 -#define EP_SPEED_FULL 1 -#define EP_SPEED_HIGH 2 - -#define EP_TYPE_CTRL 0 -#define EP_TYPE_ISOC 1 -#define EP_TYPE_BULK 2 -#define EP_TYPE_INTR 3 -#define EP_TYPE_MSK 3 - -#define STS_GOUT_NAK 1 -#define STS_DATA_UPDT 2 -#define STS_XFER_COMP 3 -#define STS_SETUP_COMP 4 -#define STS_SETUP_UPDT 6 -/** - * @} - */ - - -/** @defgroup __HOST_DEFINES_ - * @{ - */ -#define HC_PID_DATA0 0 -#define HC_PID_DATA2 1 -#define HC_PID_DATA1 2 -#define HC_PID_SETUP 3 - -#define HPRT0_PRTSPD_HIGH_SPEED 0 -#define HPRT0_PRTSPD_FULL_SPEED 1 -#define HPRT0_PRTSPD_LOW_SPEED 2 - -#define HCFG_30_60_MHZ 0 -#define HCFG_48_MHZ 1 -#define HCFG_6_MHZ 2 - -#define HCCHAR_CTRL 0 -#define HCCHAR_ISOC 1 -#define HCCHAR_BULK 2 -#define HCCHAR_INTR 3 - -#define MIN(a, b) (((a) < (b)) ? (a) : (b)) - -/** - * @} - */ - - -/** @defgroup USB_DEFINES_Exported_Types - * @{ - */ - -typedef enum -{ - USB_OTG_HS_CORE_ID = 0, - USB_OTG_FS_CORE_ID = 1 -}USB_OTG_CORE_ID_TypeDef; -/** - * @} - */ - - -/** @defgroup USB_DEFINES_Exported_Macros - * @{ - */ -/** - * @} - */ - -/** @defgroup USB_DEFINES_Exported_Variables - * @{ - */ -/** - * @} - */ - -/** @defgroup USB_DEFINES_Exported_FunctionsPrototype - * @{ - */ -/** - * @} - */ - - -/** @defgroup Internal_Macro's - * @{ - */ -#define USB_OTG_READ_REG32(reg) (*(__IO uint32_t *)reg) -#define USB_OTG_WRITE_REG32(reg,value) (*(__IO uint32_t *)reg = value) -#define USB_OTG_MODIFY_REG32(reg,clear_mask,set_mask) \ - USB_OTG_WRITE_REG32(reg, (((USB_OTG_READ_REG32(reg)) & ~clear_mask) | set_mask ) ) - -/******************************************************************************** - ENUMERATION TYPE -********************************************************************************/ -enum USB_OTG_SPEED { - USB_SPEED_UNKNOWN = 0, - USB_SPEED_LOW, - USB_SPEED_FULL, - USB_SPEED_HIGH -}; - -#endif //__USB_DEFINES__H__ - - -/** - * @} - */ - -/** - * @} - */ -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ - diff --git a/stm/lib/usb_regs.h b/stm/lib/usb_regs.h deleted file mode 100644 index d3ea8d821..000000000 --- a/stm/lib/usb_regs.h +++ /dev/null @@ -1,1188 +0,0 @@ -/** - ****************************************************************************** - * @file usb_regs.h - * @author MCD Application Team - * @version V2.1.0 - * @date 19-March-2012 - * @brief hardware registers - ****************************************************************************** - * @attention - * - *

© COPYRIGHT 2012 STMicroelectronics

- * - * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License"); - * You may not use this file except in compliance with the License. - * You may obtain a copy of the License at: - * - * http://www.st.com/software_license_agreement_liberty_v2 - * - * Unless required by applicable law or agreed to in writing, software - * distributed under the License is distributed on an "AS IS" BASIS, - * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - * See the License for the specific language governing permissions and - * limitations under the License. - * - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __USB_OTG_REGS_H__ -#define __USB_OTG_REGS_H__ - -/* Includes ------------------------------------------------------------------*/ -#include "usb_conf.h" - - -/** @addtogroup USB_OTG_DRIVER - * @{ - */ - -/** @defgroup USB_REGS - * @brief This file is the - * @{ - */ - - -/** @defgroup USB_REGS_Exported_Defines - * @{ - */ - -#define USB_OTG_HS_BASE_ADDR 0x40040000 -#define USB_OTG_FS_BASE_ADDR 0x50000000 - -#define USB_OTG_CORE_GLOBAL_REGS_OFFSET 0x000 -#define USB_OTG_DEV_GLOBAL_REG_OFFSET 0x800 -#define USB_OTG_DEV_IN_EP_REG_OFFSET 0x900 -#define USB_OTG_EP_REG_OFFSET 0x20 -#define USB_OTG_DEV_OUT_EP_REG_OFFSET 0xB00 -#define USB_OTG_HOST_GLOBAL_REG_OFFSET 0x400 -#define USB_OTG_HOST_PORT_REGS_OFFSET 0x440 -#define USB_OTG_HOST_CHAN_REGS_OFFSET 0x500 -#define USB_OTG_CHAN_REGS_OFFSET 0x20 -#define USB_OTG_PCGCCTL_OFFSET 0xE00 -#define USB_OTG_DATA_FIFO_OFFSET 0x1000 -#define USB_OTG_DATA_FIFO_SIZE 0x1000 - - -#define USB_OTG_MAX_TX_FIFOS 4 // XXX check we can make it this small! - -#define USB_OTG_HS_MAX_PACKET_SIZE 512 -#define USB_OTG_FS_MAX_PACKET_SIZE 64 -#define USB_OTG_MAX_EP0_SIZE 64 -/** - * @} - */ - -/** @defgroup USB_REGS_Exported_Types - * @{ - */ - -/** @defgroup __USB_OTG_Core_register - * @{ - */ -typedef struct _USB_OTG_GREGS //000h -{ - __IO uint32_t GOTGCTL; /* USB_OTG Control and Status Register 000h*/ - __IO uint32_t GOTGINT; /* USB_OTG Interrupt Register 004h*/ - __IO uint32_t GAHBCFG; /* Core AHB Configuration Register 008h*/ - __IO uint32_t GUSBCFG; /* Core USB Configuration Register 00Ch*/ - __IO uint32_t GRSTCTL; /* Core Reset Register 010h*/ - __IO uint32_t GINTSTS; /* Core Interrupt Register 014h*/ - __IO uint32_t GINTMSK; /* Core Interrupt Mask Register 018h*/ - __IO uint32_t GRXSTSR; /* Receive Sts Q Read Register 01Ch*/ - __IO uint32_t GRXSTSP; /* Receive Sts Q Read & POP Register 020h*/ - __IO uint32_t GRXFSIZ; /* Receive FIFO Size Register 024h*/ - __IO uint32_t DIEPTXF0_HNPTXFSIZ; /* EP0 / Non Periodic Tx FIFO Size Register 028h*/ - __IO uint32_t HNPTXSTS; /* Non Periodic Tx FIFO/Queue Sts reg 02Ch*/ - uint32_t Reserved30[2]; /* Reserved 030h*/ - __IO uint32_t GCCFG; /* General Purpose IO Register 038h*/ - __IO uint32_t CID; /* User ID Register 03Ch*/ - uint32_t Reserved40[48]; /* Reserved 040h-0FFh*/ - __IO uint32_t HPTXFSIZ; /* Host Periodic Tx FIFO Size Reg 100h*/ - __IO uint32_t DIEPTXF[USB_OTG_MAX_TX_FIFOS];/* dev Periodic Transmit FIFO */ -} -USB_OTG_GREGS; -/** - * @} - */ - - -/** @defgroup __device_Registers - * @{ - */ -typedef struct _USB_OTG_DREGS // 800h -{ - __IO uint32_t DCFG; /* dev Configuration Register 800h*/ - __IO uint32_t DCTL; /* dev Control Register 804h*/ - __IO uint32_t DSTS; /* dev Status Register (RO) 808h*/ - uint32_t Reserved0C; /* Reserved 80Ch*/ - __IO uint32_t DIEPMSK; /* dev IN Endpoint Mask 810h*/ - __IO uint32_t DOEPMSK; /* dev OUT Endpoint Mask 814h*/ - __IO uint32_t DAINT; /* dev All Endpoints Itr Reg 818h*/ - __IO uint32_t DAINTMSK; /* dev All Endpoints Itr Mask 81Ch*/ - uint32_t Reserved20; /* Reserved 820h*/ - uint32_t Reserved9; /* Reserved 824h*/ - __IO uint32_t DVBUSDIS; /* dev VBUS discharge Register 828h*/ - __IO uint32_t DVBUSPULSE; /* dev VBUS Pulse Register 82Ch*/ - __IO uint32_t DTHRCTL; /* dev thr 830h*/ - __IO uint32_t DIEPEMPMSK; /* dev empty msk 834h*/ - __IO uint32_t DEACHINT; /* dedicated EP interrupt 838h*/ - __IO uint32_t DEACHMSK; /* dedicated EP msk 83Ch*/ - uint32_t Reserved40; /* dedicated EP mask 840h*/ - __IO uint32_t DINEP1MSK; /* dedicated EP mask 844h*/ - uint32_t Reserved44[15]; /* Reserved 844-87Ch*/ - __IO uint32_t DOUTEP1MSK; /* dedicated EP msk 884h*/ -} -USB_OTG_DREGS; -/** - * @} - */ - - -/** @defgroup __IN_Endpoint-Specific_Register - * @{ - */ -typedef struct _USB_OTG_INEPREGS -{ - __IO uint32_t DIEPCTL; /* dev IN Endpoint Control Reg 900h + (ep_num * 20h) + 00h*/ - uint32_t Reserved04; /* Reserved 900h + (ep_num * 20h) + 04h*/ - __IO uint32_t DIEPINT; /* dev IN Endpoint Itr Reg 900h + (ep_num * 20h) + 08h*/ - uint32_t Reserved0C; /* Reserved 900h + (ep_num * 20h) + 0Ch*/ - __IO uint32_t DIEPTSIZ; /* IN Endpoint Txfer Size 900h + (ep_num * 20h) + 10h*/ - __IO uint32_t DIEPDMA; /* IN Endpoint DMA Address Reg 900h + (ep_num * 20h) + 14h*/ - __IO uint32_t DTXFSTS;/*IN Endpoint Tx FIFO Status Reg 900h + (ep_num * 20h) + 18h*/ - uint32_t Reserved18; /* Reserved 900h+(ep_num*20h)+1Ch-900h+ (ep_num * 20h) + 1Ch*/ -} -USB_OTG_INEPREGS; -/** - * @} - */ - - -/** @defgroup __OUT_Endpoint-Specific_Registers - * @{ - */ -typedef struct _USB_OTG_OUTEPREGS -{ - __IO uint32_t DOEPCTL; /* dev OUT Endpoint Control Reg B00h + (ep_num * 20h) + 00h*/ - uint32_t Reserved04; /* Reserved B00h + (ep_num * 20h) + 04h*/ - __IO uint32_t DOEPINT; /* dev OUT Endpoint Itr Reg B00h + (ep_num * 20h) + 08h*/ - uint32_t Reserved0C; /* Reserved B00h + (ep_num * 20h) + 0Ch*/ - __IO uint32_t DOEPTSIZ; /* dev OUT Endpoint Txfer Size B00h + (ep_num * 20h) + 10h*/ - __IO uint32_t DOEPDMA; /* dev OUT Endpoint DMA Address B00h + (ep_num * 20h) + 14h*/ - uint32_t Reserved18[2]; /* Reserved B00h + (ep_num * 20h) + 18h - B00h + (ep_num * 20h) + 1Ch*/ -} -USB_OTG_OUTEPREGS; -/** - * @} - */ - - -/** @defgroup __Host_Mode_Register_Structures - * @{ - */ -typedef struct _USB_OTG_HREGS -{ - __IO uint32_t HCFG; /* Host Configuration Register 400h*/ - __IO uint32_t HFIR; /* Host Frame Interval Register 404h*/ - __IO uint32_t HFNUM; /* Host Frame Nbr/Frame Remaining 408h*/ - uint32_t Reserved40C; /* Reserved 40Ch*/ - __IO uint32_t HPTXSTS; /* Host Periodic Tx FIFO/ Queue Status 410h*/ - __IO uint32_t HAINT; /* Host All Channels Interrupt Register 414h*/ - __IO uint32_t HAINTMSK; /* Host All Channels Interrupt Mask 418h*/ -} -USB_OTG_HREGS; -/** - * @} - */ - - -/** @defgroup __Host_Channel_Specific_Registers - * @{ - */ -typedef struct _USB_OTG_HC_REGS -{ - __IO uint32_t HCCHAR; - __IO uint32_t HCSPLT; - __IO uint32_t HCINT; - __IO uint32_t HCINTMSK; - __IO uint32_t HCTSIZ; - __IO uint32_t HCDMA; - uint32_t Reserved[2]; -} -USB_OTG_HC_REGS; -/** - * @} - */ - - -/** @defgroup __otg_Core_registers - * @{ - */ -typedef struct USB_OTG_core_regs //000h -{ - USB_OTG_GREGS *GREGS; - USB_OTG_DREGS *DREGS; - USB_OTG_HREGS *HREGS; - USB_OTG_INEPREGS *INEP_REGS[USB_OTG_MAX_TX_FIFOS]; - USB_OTG_OUTEPREGS *OUTEP_REGS[USB_OTG_MAX_TX_FIFOS]; - USB_OTG_HC_REGS *HC_REGS[USB_OTG_MAX_TX_FIFOS]; - __IO uint32_t *HPRT0; - __IO uint32_t *DFIFO[USB_OTG_MAX_TX_FIFOS]; - __IO uint32_t *PCGCCTL; -} -USB_OTG_CORE_REGS , *PUSB_OTG_CORE_REGS; -typedef union _USB_OTG_GOTGCTL_TypeDef -{ - uint32_t d32; - struct - { -uint32_t sesreqscs : - 1; -uint32_t sesreq : - 1; -uint32_t Reserved2_7 : - 6; -uint32_t hstnegscs : - 1; -uint32_t hnpreq : - 1; -uint32_t hstsethnpen : - 1; -uint32_t devhnpen : - 1; -uint32_t Reserved12_15 : - 4; -uint32_t conidsts : - 1; -uint32_t dbct : - 1; -uint32_t asesvld : - 1; -uint32_t bsesvld : - 1; -uint32_t Reserved20_31 : - 12; - } - b; -} USB_OTG_GOTGCTL_TypeDef ; - -typedef union _USB_OTG_GOTGINT_TypeDef -{ - uint32_t d32; - struct - { -uint32_t Reserved0_1 : - 2; -uint32_t sesenddet : - 1; -uint32_t Reserved3_7 : - 5; -uint32_t sesreqsucstschng : - 1; -uint32_t hstnegsucstschng : - 1; -uint32_t reserver10_16 : - 7; -uint32_t hstnegdet : - 1; -uint32_t adevtoutchng : - 1; -uint32_t debdone : - 1; -uint32_t Reserved31_20 : - 12; - } - b; -} USB_OTG_GOTGINT_TypeDef ; -typedef union _USB_OTG_GAHBCFG_TypeDef -{ - uint32_t d32; - struct - { -uint32_t glblintrmsk : - 1; -uint32_t hburstlen : - 4; -uint32_t dmaenable : - 1; -uint32_t Reserved : - 1; -uint32_t nptxfemplvl_txfemplvl : - 1; -uint32_t ptxfemplvl : - 1; -uint32_t Reserved9_31 : - 23; - } - b; -} USB_OTG_GAHBCFG_TypeDef ; -typedef union _USB_OTG_GUSBCFG_TypeDef -{ - uint32_t d32; - struct - { -uint32_t toutcal : - 3; -uint32_t Reserved3_5 : - 3; -uint32_t physel : - 1; -uint32_t Reserved7 : - 1; -uint32_t srpcap : - 1; -uint32_t hnpcap : - 1; -uint32_t usbtrdtim : - 4; -uint32_t Reserved14 : - 1; -uint32_t phylpwrclksel : - 1; -uint32_t Reserved16 : - 1; -uint32_t ulpi_fsls : - 1; -uint32_t ulpi_auto_res : - 1; -uint32_t ulpi_clk_sus_m : - 1; -uint32_t ulpi_ext_vbus_drv : - 1; -uint32_t ulpi_int_vbus_ind : - 1; -uint32_t term_sel_dl_pulse : - 1; -uint32_t ulpi_ind_cpl : - 1; -uint32_t ulpi_passthrough : - 1; -uint32_t ulpi_protect_disable : - 1; -uint32_t Reserved26_28 : - 3; -uint32_t force_host : - 1; -uint32_t force_dev : - 1; -uint32_t corrupt_tx : - 1; - } - b; -} USB_OTG_GUSBCFG_TypeDef ; -typedef union _USB_OTG_GRSTCTL_TypeDef -{ - uint32_t d32; - struct - { -uint32_t csftrst : - 1; -uint32_t hsftrst : - 1; -uint32_t hstfrm : - 1; -uint32_t Reserved3 : - 1; -uint32_t rxfflsh : - 1; -uint32_t txfflsh : - 1; -uint32_t txfnum : - 5; -uint32_t Reserved11_29 : - 19; -uint32_t dmareq : - 1; -uint32_t ahbidle : - 1; - } - b; -} USB_OTG_GRSTCTL_TypeDef ; -typedef union _USB_OTG_GINTMSK_TypeDef -{ - uint32_t d32; - struct - { -uint32_t Reserved0 : - 1; -uint32_t modemismatch : - 1; -uint32_t otgintr : - 1; -uint32_t sofintr : - 1; -uint32_t rxstsqlvl : - 1; -uint32_t nptxfempty : - 1; -uint32_t ginnakeff : - 1; -uint32_t goutnakeff : - 1; -uint32_t Reserved8_9 : - 2; -uint32_t erlysuspend : - 1; -uint32_t usbsuspend : - 1; -uint32_t usbreset : - 1; -uint32_t enumdone : - 1; -uint32_t isooutdrop : - 1; -uint32_t eopframe : - 1; -uint32_t Reserved16 : - 1; -uint32_t epmismatch : - 1; -uint32_t inepintr : - 1; -uint32_t outepintr : - 1; -uint32_t incomplisoin : - 1; -uint32_t incomplisoout : - 1; -uint32_t Reserved22_23 : - 2; -uint32_t portintr : - 1; -uint32_t hcintr : - 1; -uint32_t ptxfempty : - 1; -uint32_t Reserved27 : - 1; -uint32_t conidstschng : - 1; -uint32_t disconnect : - 1; -uint32_t sessreqintr : - 1; -uint32_t wkupintr : - 1; - } - b; -} USB_OTG_GINTMSK_TypeDef ; -typedef union _USB_OTG_GINTSTS_TypeDef -{ - uint32_t d32; - struct - { -uint32_t curmode : - 1; -uint32_t modemismatch : - 1; -uint32_t otgintr : - 1; -uint32_t sofintr : - 1; -uint32_t rxstsqlvl : - 1; -uint32_t nptxfempty : - 1; -uint32_t ginnakeff : - 1; -uint32_t goutnakeff : - 1; -uint32_t Reserved8_9 : - 2; -uint32_t erlysuspend : - 1; -uint32_t usbsuspend : - 1; -uint32_t usbreset : - 1; -uint32_t enumdone : - 1; -uint32_t isooutdrop : - 1; -uint32_t eopframe : - 1; -uint32_t Reserved16_17 : - 2; -uint32_t inepint: - 1; -uint32_t outepintr : - 1; -uint32_t incomplisoin : - 1; -uint32_t incomplisoout : - 1; -uint32_t Reserved22_23 : - 2; -uint32_t portintr : - 1; -uint32_t hcintr : - 1; -uint32_t ptxfempty : - 1; -uint32_t Reserved27 : - 1; -uint32_t conidstschng : - 1; -uint32_t disconnect : - 1; -uint32_t sessreqintr : - 1; -uint32_t wkupintr : - 1; - } - b; -} USB_OTG_GINTSTS_TypeDef ; -typedef union _USB_OTG_DRXSTS_TypeDef -{ - uint32_t d32; - struct - { -uint32_t epnum : - 4; -uint32_t bcnt : - 11; -uint32_t dpid : - 2; -uint32_t pktsts : - 4; -uint32_t fn : - 4; -uint32_t Reserved : - 7; - } - b; -} USB_OTG_DRXSTS_TypeDef ; -typedef union _USB_OTG_GRXSTS_TypeDef -{ - uint32_t d32; - struct - { -uint32_t chnum : - 4; -uint32_t bcnt : - 11; -uint32_t dpid : - 2; -uint32_t pktsts : - 4; -uint32_t Reserved : - 11; - } - b; -} USB_OTG_GRXFSTS_TypeDef ; -typedef union _USB_OTG_FSIZ_TypeDef -{ - uint32_t d32; - struct - { -uint32_t startaddr : - 16; -uint32_t depth : - 16; - } - b; -} USB_OTG_FSIZ_TypeDef ; -typedef union _USB_OTG_HNPTXSTS_TypeDef -{ - uint32_t d32; - struct - { - uint32_t nptxfspcavail : - 16; - uint32_t nptxqspcavail : - 8; - struct - { - uint32_t terminate : - 1; - uint32_t token : - 2; - uint32_t chnum : - 4; - } nptxqtop; - uint32_t Reserved : - 1; - } - b; -} USB_OTG_HNPTXSTS_TypeDef ; -typedef union _USB_OTG_DTXFSTSn_TypeDef -{ - uint32_t d32; - struct - { -uint32_t txfspcavail : - 16; -uint32_t Reserved : - 16; - } - b; -} USB_OTG_DTXFSTSn_TypeDef ; - -typedef union _USB_OTG_GCCFG_TypeDef -{ - uint32_t d32; - struct - { -uint32_t Reserved_in : - 16; -uint32_t pwdn : - 1; -uint32_t Reserved_17 : - 1; -uint32_t vbussensingA : - 1; -uint32_t vbussensingB : - 1; -uint32_t sofouten : - 1; -uint32_t disablevbussensing : - 1; -uint32_t Reserved_out : - 10; - } - b; -} USB_OTG_GCCFG_TypeDef ; - -typedef union _USB_OTG_DCFG_TypeDef -{ - uint32_t d32; - struct - { -uint32_t devspd : - 2; -uint32_t nzstsouthshk : - 1; -uint32_t Reserved3 : - 1; -uint32_t devaddr : - 7; -uint32_t perfrint : - 2; -uint32_t Reserved12_31 : - 19; - } - b; -} USB_OTG_DCFG_TypeDef ; -typedef union _USB_OTG_DCTL_TypeDef -{ - uint32_t d32; - struct - { -uint32_t rmtwkupsig : - 1; -uint32_t sftdiscon : - 1; -uint32_t gnpinnaksts : - 1; -uint32_t goutnaksts : - 1; -uint32_t tstctl : - 3; -uint32_t sgnpinnak : - 1; -uint32_t cgnpinnak : - 1; -uint32_t sgoutnak : - 1; -uint32_t cgoutnak : - 1; -uint32_t poprg_done : - 1; -uint32_t Reserved : - 20; - } - b; -} USB_OTG_DCTL_TypeDef ; -typedef union _USB_OTG_DSTS_TypeDef -{ - uint32_t d32; - struct - { -uint32_t suspsts : - 1; -uint32_t enumspd : - 2; -uint32_t errticerr : - 1; -uint32_t Reserved4_7: - 4; -uint32_t soffn : - 14; -uint32_t Reserved22_31 : - 10; - } - b; -} USB_OTG_DSTS_TypeDef ; -typedef union _USB_OTG_DIEPINTn_TypeDef -{ - uint32_t d32; - struct - { -uint32_t xfercompl : - 1; -uint32_t epdisabled : - 1; -uint32_t Reserved2 : - 1; -uint32_t timeout : - 1; -uint32_t intktxfemp : - 1; -uint32_t Reserved5 : - 1; -uint32_t inepnakeff : - 1; -uint32_t emptyintr : - 1; -uint32_t txfifoundrn : - 1; -uint32_t Reserved14_31 : - 23; - } - b; -} USB_OTG_DIEPINTn_TypeDef ; -typedef union _USB_OTG_DIEPINTn_TypeDef USB_OTG_DIEPMSK_TypeDef ; -typedef union _USB_OTG_DOEPINTn_TypeDef -{ - uint32_t d32; - struct - { -uint32_t xfercompl : - 1; -uint32_t epdisabled : - 1; -uint32_t Reserved2 : - 1; -uint32_t setup : - 1; -uint32_t Reserved04_31 : - 28; - } - b; -} USB_OTG_DOEPINTn_TypeDef ; -typedef union _USB_OTG_DOEPINTn_TypeDef USB_OTG_DOEPMSK_TypeDef ; - -typedef union _USB_OTG_DAINT_TypeDef -{ - uint32_t d32; - struct - { -uint32_t in : - 16; -uint32_t out : - 16; - } - ep; -} USB_OTG_DAINT_TypeDef ; - -typedef union _USB_OTG_DTHRCTL_TypeDef -{ - uint32_t d32; - struct - { -uint32_t non_iso_thr_en : - 1; -uint32_t iso_thr_en : - 1; -uint32_t tx_thr_len : - 9; -uint32_t Reserved11_15 : - 5; -uint32_t rx_thr_en : - 1; -uint32_t rx_thr_len : - 9; -uint32_t Reserved26 : - 1; -uint32_t arp_en : - 1; -uint32_t Reserved28_31 : - 4; - } - b; -} USB_OTG_DTHRCTL_TypeDef ; -typedef union _USB_OTG_DEPCTL_TypeDef -{ - uint32_t d32; - struct - { -uint32_t mps : - 11; -uint32_t reserved : - 4; -uint32_t usbactep : - 1; -uint32_t dpid : - 1; -uint32_t naksts : - 1; -uint32_t eptype : - 2; -uint32_t snp : - 1; -uint32_t stall : - 1; -uint32_t txfnum : - 4; -uint32_t cnak : - 1; -uint32_t snak : - 1; -uint32_t setd0pid : - 1; -uint32_t setd1pid : - 1; -uint32_t epdis : - 1; -uint32_t epena : - 1; - } - b; -} USB_OTG_DEPCTL_TypeDef ; -typedef union _USB_OTG_DEPXFRSIZ_TypeDef -{ - uint32_t d32; - struct - { -uint32_t xfersize : - 19; -uint32_t pktcnt : - 10; -uint32_t mc : - 2; -uint32_t Reserved : - 1; - } - b; -} USB_OTG_DEPXFRSIZ_TypeDef ; -typedef union _USB_OTG_DEP0XFRSIZ_TypeDef -{ - uint32_t d32; - struct - { -uint32_t xfersize : - 7; -uint32_t Reserved7_18 : - 12; -uint32_t pktcnt : - 2; -uint32_t Reserved20_28 : - 9; -uint32_t supcnt : - 2; - uint32_t Reserved31; - } - b; -} USB_OTG_DEP0XFRSIZ_TypeDef ; -typedef union _USB_OTG_HCFG_TypeDef -{ - uint32_t d32; - struct - { -uint32_t fslspclksel : - 2; -uint32_t fslssupp : - 1; - } - b; -} USB_OTG_HCFG_TypeDef ; -typedef union _USB_OTG_HFRMINTRVL_TypeDef -{ - uint32_t d32; - struct - { -uint32_t frint : - 16; -uint32_t Reserved : - 16; - } - b; -} USB_OTG_HFRMINTRVL_TypeDef ; - -typedef union _USB_OTG_HFNUM_TypeDef -{ - uint32_t d32; - struct - { -uint32_t frnum : - 16; -uint32_t frrem : - 16; - } - b; -} USB_OTG_HFNUM_TypeDef ; -typedef union _USB_OTG_HPTXSTS_TypeDef -{ - uint32_t d32; - struct - { -uint32_t ptxfspcavail : - 16; -uint32_t ptxqspcavail : - 8; - struct - { - uint32_t terminate : - 1; - uint32_t token : - 2; - uint32_t chnum : - 4; - uint32_t odd_even : - 1; - } ptxqtop; - } - b; -} USB_OTG_HPTXSTS_TypeDef ; -typedef union _USB_OTG_HPRT0_TypeDef -{ - uint32_t d32; - struct - { -uint32_t prtconnsts : - 1; -uint32_t prtconndet : - 1; -uint32_t prtena : - 1; -uint32_t prtenchng : - 1; -uint32_t prtovrcurract : - 1; -uint32_t prtovrcurrchng : - 1; -uint32_t prtres : - 1; -uint32_t prtsusp : - 1; -uint32_t prtrst : - 1; -uint32_t Reserved9 : - 1; -uint32_t prtlnsts : - 2; -uint32_t prtpwr : - 1; -uint32_t prttstctl : - 4; -uint32_t prtspd : - 2; -uint32_t Reserved19_31 : - 13; - } - b; -} USB_OTG_HPRT0_TypeDef ; -typedef union _USB_OTG_HAINT_TypeDef -{ - uint32_t d32; - struct - { -uint32_t chint : - 16; -uint32_t Reserved : - 16; - } - b; -} USB_OTG_HAINT_TypeDef ; -typedef union _USB_OTG_HAINTMSK_TypeDef -{ - uint32_t d32; - struct - { -uint32_t chint : - 16; -uint32_t Reserved : - 16; - } - b; -} USB_OTG_HAINTMSK_TypeDef ; -typedef union _USB_OTG_HCCHAR_TypeDef -{ - uint32_t d32; - struct - { -uint32_t mps : - 11; -uint32_t epnum : - 4; -uint32_t epdir : - 1; -uint32_t Reserved : - 1; -uint32_t lspddev : - 1; -uint32_t eptype : - 2; -uint32_t multicnt : - 2; -uint32_t devaddr : - 7; -uint32_t oddfrm : - 1; -uint32_t chdis : - 1; -uint32_t chen : - 1; - } - b; -} USB_OTG_HCCHAR_TypeDef ; -typedef union _USB_OTG_HCSPLT_TypeDef -{ - uint32_t d32; - struct - { -uint32_t prtaddr : - 7; -uint32_t hubaddr : - 7; -uint32_t xactpos : - 2; -uint32_t compsplt : - 1; -uint32_t Reserved : - 14; -uint32_t spltena : - 1; - } - b; -} USB_OTG_HCSPLT_TypeDef ; -typedef union _USB_OTG_HCINTn_TypeDef -{ - uint32_t d32; - struct - { -uint32_t xfercompl : - 1; -uint32_t chhltd : - 1; -uint32_t ahberr : - 1; -uint32_t stall : - 1; -uint32_t nak : - 1; -uint32_t ack : - 1; -uint32_t nyet : - 1; -uint32_t xacterr : - 1; -uint32_t bblerr : - 1; -uint32_t frmovrun : - 1; -uint32_t datatglerr : - 1; -uint32_t Reserved : - 21; - } - b; -} USB_OTG_HCINTn_TypeDef ; -typedef union _USB_OTG_HCTSIZn_TypeDef -{ - uint32_t d32; - struct - { -uint32_t xfersize : - 19; -uint32_t pktcnt : - 10; -uint32_t pid : - 2; -uint32_t dopng : - 1; - } - b; -} USB_OTG_HCTSIZn_TypeDef ; -typedef union _USB_OTG_HCINTMSK_TypeDef -{ - uint32_t d32; - struct - { -uint32_t xfercompl : - 1; -uint32_t chhltd : - 1; -uint32_t ahberr : - 1; -uint32_t stall : - 1; -uint32_t nak : - 1; -uint32_t ack : - 1; -uint32_t nyet : - 1; -uint32_t xacterr : - 1; -uint32_t bblerr : - 1; -uint32_t frmovrun : - 1; -uint32_t datatglerr : - 1; -uint32_t Reserved : - 21; - } - b; -} USB_OTG_HCINTMSK_TypeDef ; - -typedef union _USB_OTG_PCGCCTL_TypeDef -{ - uint32_t d32; - struct - { -uint32_t stoppclk : - 1; -uint32_t gatehclk : - 1; -uint32_t Reserved2_3 : - 2; -uint32_t phy_susp : - 1; -uint32_t Reserved5_31 : - 27; - } - b; -} USB_OTG_PCGCCTL_TypeDef ; - -/** - * @} - */ - - -/** @defgroup USB_REGS_Exported_Macros - * @{ - */ -/** - * @} - */ - -/** @defgroup USB_REGS_Exported_Variables - * @{ - */ -/** - * @} - */ - -/** @defgroup USB_REGS_Exported_FunctionsPrototype - * @{ - */ -/** - * @} - */ - - -#endif //__USB_OTG_REGS_H__ - - -/** - * @} - */ - -/** - * @} - */ -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ - diff --git a/stm/lib/usbd_cdc_core.h b/stm/lib/usbd_cdc_core.h deleted file mode 100644 index 026462143..000000000 --- a/stm/lib/usbd_cdc_core.h +++ /dev/null @@ -1,143 +0,0 @@ -/** - ****************************************************************************** - * @file usbd_cdc_core.h - * @author MCD Application Team - * @version V1.1.0 - * @date 19-March-2012 - * @brief header file for the usbd_cdc_core.c file. - ****************************************************************************** - * @attention - * - *

© COPYRIGHT 2012 STMicroelectronics

- * - * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License"); - * You may not use this file except in compliance with the License. - * You may obtain a copy of the License at: - * - * http://www.st.com/software_license_agreement_liberty_v2 - * - * Unless required by applicable law or agreed to in writing, software - * distributed under the License is distributed on an "AS IS" BASIS, - * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - * See the License for the specific language governing permissions and - * limitations under the License. - * - ****************************************************************************** - */ - -/* Includes ------------------------------------------------------------------*/ - -#ifndef __USB_CDC_CORE_H_ -#define __USB_CDC_CORE_H_ - -#include "usbd_ioreq.h" - -/** @addtogroup STM32_USB_OTG_DEVICE_LIBRARY - * @{ - */ - -/** @defgroup usbd_cdc - * @brief This file is the Header file for USBD_cdc.c - * @{ - */ - - -/** @defgroup usbd_cdc_Exported_Defines - * @{ - */ -#define USB_CDC_CONFIG_DESC_SIZ (98) -#define USB_CDC_DESC_SIZ (98-9) - -#define CDC_DESCRIPTOR_TYPE 0x21 - -#define DEVICE_CLASS_CDC 0x02 -#define DEVICE_SUBCLASS_CDC 0x00 - - -#define USB_DEVICE_DESCRIPTOR_TYPE 0x01 -#define USB_CONFIGURATION_DESCRIPTOR_TYPE 0x02 -#define USB_STRING_DESCRIPTOR_TYPE 0x03 -#define USB_INTERFACE_DESCRIPTOR_TYPE 0x04 -#define USB_ENDPOINT_DESCRIPTOR_TYPE 0x05 - -#define STANDARD_ENDPOINT_DESC_SIZE 0x09 - -#define CDC_DATA_IN_PACKET_SIZE CDC_DATA_MAX_PACKET_SIZE - -#define CDC_DATA_OUT_PACKET_SIZE CDC_DATA_MAX_PACKET_SIZE - -/*---------------------------------------------------------------------*/ -/* CDC definitions */ -/*---------------------------------------------------------------------*/ - -/**************************************************/ -/* CDC Requests */ -/**************************************************/ -#define SEND_ENCAPSULATED_COMMAND 0x00 -#define GET_ENCAPSULATED_RESPONSE 0x01 -#define SET_COMM_FEATURE 0x02 -#define GET_COMM_FEATURE 0x03 -#define CLEAR_COMM_FEATURE 0x04 -#define SET_LINE_CODING 0x20 -#define GET_LINE_CODING 0x21 -#define SET_CONTROL_LINE_STATE 0x22 -#define SEND_BREAK 0x23 -#define NO_CMD 0xFF - -/** - * @} - */ - - -/** @defgroup USBD_CORE_Exported_TypesDefinitions - * @{ - */ -typedef struct _CDC_IF_PROP -{ - uint16_t (*pIf_Init) (void); - uint16_t (*pIf_DeInit) (void); - uint16_t (*pIf_Ctrl) (uint32_t Cmd, uint8_t* Buf, uint32_t Len); - uint16_t (*pIf_DataTx) (const uint8_t* Buf, uint32_t Len); - uint16_t (*pIf_DataRx) (uint8_t* Buf, uint32_t Len); -} -CDC_IF_Prop_TypeDef; -/** - * @} - */ - - - -/** @defgroup USBD_CORE_Exported_Macros - * @{ - */ - -/** - * @} - */ - -/** @defgroup USBD_CORE_Exported_Variables - * @{ - */ - -extern USBD_Class_cb_TypeDef USBD_CDC_cb; -/** - * @} - */ - -/** @defgroup USB_CORE_Exported_Functions - * @{ - */ -/** - * @} - */ - -#endif // __USB_CDC_CORE_H_ -/** - * @} - */ - -/** - * @} - */ - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/stm/lib/usbd_cdc_vcp.c b/stm/lib/usbd_cdc_vcp.c deleted file mode 100644 index 985b0b4fd..000000000 --- a/stm/lib/usbd_cdc_vcp.c +++ /dev/null @@ -1,220 +0,0 @@ -/** - ****************************************************************************** - * @file usbd_cdc_vcp.c - * @author MCD Application Team - * @version V1.1.0 - * @date 19-March-2012 - * @brief Generic media access Layer. - ****************************************************************************** - * @attention - * - *

© COPYRIGHT 2012 STMicroelectronics

- * - * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License"); - * You may not use this file except in compliance with the License. - * You may obtain a copy of the License at: - * - * http://www.st.com/software_license_agreement_liberty_v2 - * - * Unless required by applicable law or agreed to in writing, software - * distributed under the License is distributed on an "AS IS" BASIS, - * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - * See the License for the specific language governing permissions and - * limitations under the License. - * - ****************************************************************************** - */ - -#ifdef USB_OTG_HS_INTERNAL_DMA_ENABLED -#pragma data_alignment = 4 -#endif /* USB_OTG_HS_INTERNAL_DMA_ENABLED */ - -/* Includes ------------------------------------------------------------------*/ -#include "usbd_conf.h" -#include "usbd_cdc_vcp.h" -#include "std.h" - -/* Private typedef -----------------------------------------------------------*/ -/* Private define ------------------------------------------------------------*/ -/* Private macro -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -LINE_CODING linecoding = - { - 115200, /* baud rate*/ - 0x00, /* stop bits-1*/ - 0x00, /* parity - none*/ - 0x08 /* nb. of bits 8*/ - }; - - -/* These are external variables imported from CDC core to be used for IN - transfer management. */ -extern uint8_t APP_Rx_Buffer []; /* Write CDC received data in this buffer. - These data will be sent over USB IN endpoint - in the CDC core functions. */ -extern uint32_t APP_Rx_ptr_in; /* Increment this pointer or roll it back to - start address when writing received data - in the buffer APP_Rx_Buffer. */ - -/* Private function prototypes -----------------------------------------------*/ -static uint16_t VCP_Init (void); -static uint16_t VCP_DeInit (void); -static uint16_t VCP_Ctrl (uint32_t Cmd, uint8_t* Buf, uint32_t Len); -static uint16_t VCP_DataTx (const uint8_t* Buf, uint32_t Len); -static uint16_t VCP_DataRx (uint8_t* Buf, uint32_t Len); - -CDC_IF_Prop_TypeDef VCP_fops = -{ - VCP_Init, - VCP_DeInit, - VCP_Ctrl, - VCP_DataTx, - VCP_DataRx -}; - -/* Private functions ---------------------------------------------------------*/ -/** - * @brief VCP_Init - * Initializes the Media on the STM32 - * @param None - * @retval Result of the opeartion (USBD_OK in all cases) - */ -static uint16_t VCP_Init(void) { - return USBD_OK; -} - -/** - * @brief VCP_DeInit - * DeInitializes the Media on the STM32 - * @param None - * @retval Result of the opeartion (USBD_OK in all cases) - */ -static uint16_t VCP_DeInit(void) -{ - - return USBD_OK; -} - - -/** - * @brief VCP_Ctrl - * Manage the CDC class requests - * @param Cmd: Command code - * @param Buf: Buffer containing command data (request parameters) - * @param Len: Number of data to be sent (in bytes) - * @retval Result of the opeartion (USBD_OK in all cases) - */ -static uint16_t VCP_Ctrl (uint32_t Cmd, uint8_t* Buf, uint32_t Len) -{ - switch (Cmd) - { - case SEND_ENCAPSULATED_COMMAND: - /* Not needed for this driver */ - break; - - case GET_ENCAPSULATED_RESPONSE: - /* Not needed for this driver */ - break; - - case SET_COMM_FEATURE: - /* Not needed for this driver */ - break; - - case GET_COMM_FEATURE: - /* Not needed for this driver */ - break; - - case CLEAR_COMM_FEATURE: - /* Not needed for this driver */ - break; - - case SET_LINE_CODING: - /* - linecoding.bitrate = (uint32_t)(Buf[0] | (Buf[1] << 8) | (Buf[2] << 16) | (Buf[3] << 24)); - linecoding.format = Buf[4]; - linecoding.paritytype = Buf[5]; - linecoding.datatype = Buf[6]; - // Set the new configuration - VCP_COMConfig(OTHER_CONFIG); - */ - break; - - case GET_LINE_CODING: - /* - Buf[0] = (uint8_t)(linecoding.bitrate); - Buf[1] = (uint8_t)(linecoding.bitrate >> 8); - Buf[2] = (uint8_t)(linecoding.bitrate >> 16); - Buf[3] = (uint8_t)(linecoding.bitrate >> 24); - Buf[4] = linecoding.format; - Buf[5] = linecoding.paritytype; - Buf[6] = linecoding.datatype; - */ - Buf[0] = 0; - Buf[1] = 0; - Buf[2] = 0; - Buf[3] = 0; - Buf[4] = 0; - Buf[5] = 0; - Buf[6] = 0; - break; - - case SET_CONTROL_LINE_STATE: - /* Not needed for this driver */ - break; - - case SEND_BREAK: - /* Not needed for this driver */ - break; - - default: - break; - } - - return USBD_OK; -} - -/** - * @brief VCP_DataTx - * CDC received data to be send over USB IN endpoint are managed in - * this function. - * @param Buf: Buffer of data to be sent - * @param Len: Number of data to be sent (in bytes) - * @retval Result of the opeartion: USBD_OK if all operations are OK else VCP_FAIL - */ -static uint16_t VCP_DataTx (const uint8_t* Buf, uint32_t Len) -{ - for (int i = 0; i < Len; i++) { - APP_Rx_Buffer[APP_Rx_ptr_in] = Buf[i]; - APP_Rx_ptr_in++; - - /* To avoid buffer overflow */ - if(APP_Rx_ptr_in == APP_RX_DATA_SIZE) { - APP_Rx_ptr_in = 0; - } - } - - return USBD_OK; -} - -/** - * @brief VCP_DataRx - * Data received over USB OUT endpoint are sent over CDC interface - * through this function. - * - * @note - * This function will block any OUT packet reception on USB endpoint - * untill exiting this function. If you exit this function before transfer - * is complete on CDC interface (ie. using DMA controller) it will result - * in receiving more data while previous ones are still not sent. - * - * @param Buf: Buffer of data to be received - * @param Len: Number of data received (in bytes) - * @retval Result of the opeartion: USBD_OK if all operations are OK else VCP_FAIL - */ -static uint16_t VCP_DataRx (uint8_t* Buf, uint32_t Len) { - extern void usb_vcp_receive(uint8_t *buf, uint32_t len); - usb_vcp_receive(Buf, Len); - return USBD_OK; -} - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/stm/lib/usbd_cdc_vcp.h b/stm/lib/usbd_cdc_vcp.h deleted file mode 100644 index a80e287fa..000000000 --- a/stm/lib/usbd_cdc_vcp.h +++ /dev/null @@ -1,52 +0,0 @@ -/** - ****************************************************************************** - * @file usbd_cdc_vcp.h - * @author MCD Application Team - * @version V1.1.0 - * @date 19-March-2012 - * @brief Header for usbd_cdc_vcp.c file. - ****************************************************************************** - * @attention - * - *

© COPYRIGHT 2012 STMicroelectronics

- * - * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License"); - * You may not use this file except in compliance with the License. - * You may obtain a copy of the License at: - * - * http://www.st.com/software_license_agreement_liberty_v2 - * - * Unless required by applicable law or agreed to in writing, software - * distributed under the License is distributed on an "AS IS" BASIS, - * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - * See the License for the specific language governing permissions and - * limitations under the License. - * - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __USBD_CDC_VCP_H -#define __USBD_CDC_VCP_H - -#include "usbd_cdc_core.h" -#include "usbd_conf.h" - -/* Exported typef ------------------------------------------------------------*/ -/* The following structures groups all needed parameters to be configured for the - ComPort. These parameters can modified on the fly by the host through CDC class - command class requests. */ -typedef struct -{ - uint32_t bitrate; - uint8_t format; - uint8_t paritytype; - uint8_t datatype; -} LINE_CODING; - -#define DEFAULT_CONFIG 0 -#define OTHER_CONFIG 1 - -#endif /* __USBD_CDC_VCP_H */ - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/stm/lib/usbd_conf.h b/stm/lib/usbd_conf.h deleted file mode 100644 index ad4cd73c8..000000000 --- a/stm/lib/usbd_conf.h +++ /dev/null @@ -1,23 +0,0 @@ -#ifndef __USBD_CONF__H__ -#define __USBD_CONF__H__ - -#define USBD_CFG_MAX_NUM 1 -#define USBD_ITF_MAX_NUM 1 // TODO need more than 1? - -// CDC Endpoints parameters -#define CDC_IN_EP 0x81 /* EP1 for data IN */ -#define CDC_OUT_EP 0x01 /* EP1 for data OUT */ -#define CDC_CMD_EP 0x82 /* EP2 for CDC commands */ -#define CDC_DATA_MAX_PACKET_SIZE 64 /* Endpoint IN & OUT Packet size */ -#define CDC_CMD_PACKET_SZE 8 /* Control Endpoint Packet size */ -#define CDC_IN_FRAME_INTERVAL 5 /* Number of frames between IN transfers */ -#define APP_RX_DATA_SIZE 2048 /* Total size of IN buffer: - APP_RX_DATA_SIZE*8/MAX_BAUDARATE*1000 should be > CDC_IN_FRAME_INTERVAL */ - -// MSC parameters -#define MSC_IN_EP 0x83 -#define MSC_OUT_EP 0x03 -#define MSC_MAX_PACKET 64 -#define MSC_MEDIA_PACKET 2048 /* XXX was 4096; how small can we make it? */ - -#endif //__USBD_CONF__H__ diff --git a/stm/lib/usbd_core.c b/stm/lib/usbd_core.c deleted file mode 100644 index fa647eb0f..000000000 --- a/stm/lib/usbd_core.c +++ /dev/null @@ -1,506 +0,0 @@ -/** - ****************************************************************************** - * @file usbd_core.c - * @author MCD Application Team - * @version V1.1.0 - * @date 19-March-2012 - * @brief This file provides all the USBD core functions. - ****************************************************************************** - * @attention - * - *

© COPYRIGHT 2012 STMicroelectronics

- * - * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License"); - * You may not use this file except in compliance with the License. - * You may obtain a copy of the License at: - * - * http://www.st.com/software_license_agreement_liberty_v2 - * - * Unless required by applicable law or agreed to in writing, software - * distributed under the License is distributed on an "AS IS" BASIS, - * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - * See the License for the specific language governing permissions and - * limitations under the License. - * - ****************************************************************************** - */ - -/* Includes ------------------------------------------------------------------*/ -#include "usbd_core.h" -#include "usbd_req.h" -#include "usbd_ioreq.h" -#include "usb_dcd_int.h" -#include "usb_bsp.h" - -/** @addtogroup STM32_USB_OTG_DEVICE_LIBRARY -* @{ -*/ - - -/** @defgroup USBD_CORE -* @brief usbd core module -* @{ -*/ - -/** @defgroup USBD_CORE_Private_TypesDefinitions -* @{ -*/ -/** -* @} -*/ - - -/** @defgroup USBD_CORE_Private_Defines -* @{ -*/ - -/** -* @} -*/ - - -/** @defgroup USBD_CORE_Private_Macros -* @{ -*/ -/** -* @} -*/ - - - - -/** @defgroup USBD_CORE_Private_FunctionPrototypes -* @{ -*/ -static uint8_t USBD_SetupStage(USB_OTG_CORE_HANDLE *pdev); -static uint8_t USBD_DataOutStage(USB_OTG_CORE_HANDLE *pdev , uint8_t epnum); -static uint8_t USBD_DataInStage(USB_OTG_CORE_HANDLE *pdev , uint8_t epnum); -static uint8_t USBD_SOF(USB_OTG_CORE_HANDLE *pdev); -static uint8_t USBD_Reset(USB_OTG_CORE_HANDLE *pdev); -static uint8_t USBD_Suspend(USB_OTG_CORE_HANDLE *pdev); -static uint8_t USBD_Resume(USB_OTG_CORE_HANDLE *pdev); -#ifdef VBUS_SENSING_ENABLED -static uint8_t USBD_DevConnected(USB_OTG_CORE_HANDLE *pdev); -static uint8_t USBD_DevDisconnected(USB_OTG_CORE_HANDLE *pdev); -#endif -static uint8_t USBD_IsoINIncomplete(USB_OTG_CORE_HANDLE *pdev); -static uint8_t USBD_IsoOUTIncomplete(USB_OTG_CORE_HANDLE *pdev); -static uint8_t USBD_RunTestMode (USB_OTG_CORE_HANDLE *pdev) ; -/** -* @} -*/ - -/** @defgroup USBD_CORE_Private_Variables -* @{ -*/ - -__IO USB_OTG_DCTL_TypeDef SET_TEST_MODE; - -USBD_DCD_INT_cb_TypeDef USBD_DCD_INT_cb = -{ - USBD_DataOutStage, - USBD_DataInStage, - USBD_SetupStage, - USBD_SOF, - USBD_Reset, - USBD_Suspend, - USBD_Resume, - USBD_IsoINIncomplete, - USBD_IsoOUTIncomplete, -#ifdef VBUS_SENSING_ENABLED -USBD_DevConnected, -USBD_DevDisconnected, -#endif -}; - -USBD_DCD_INT_cb_TypeDef *USBD_DCD_INT_fops = &USBD_DCD_INT_cb; -/** -* @} -*/ - -/** @defgroup USBD_CORE_Private_Functions -* @{ -*/ - -/** -* @brief USBD_Init -* Initailizes the device stack and load the class driver -* @param pdev: device instance -* @param core_address: USB OTG core ID -* @param class_cb: Class callback structure address -* @param usr_cb: User callback structure address -* @retval None -*/ -void USBD_Init(USB_OTG_CORE_HANDLE *pdev, - USB_OTG_CORE_ID_TypeDef coreID, - USBD_DEVICE *pDevice, - USBD_Class_cb_TypeDef *class_cb, - USBD_Usr_cb_TypeDef *usr_cb) -{ - /* Hardware Init */ - USB_OTG_BSP_Init(pdev); - - USBD_DeInit(pdev); - - /*Register class and user callbacks */ - pdev->dev.class_cb = class_cb; - pdev->dev.usr_cb = usr_cb; - pdev->dev.usr_device = pDevice; - - /* set USB OTG core params */ - DCD_Init(pdev , coreID); - - /* Upon Init call usr callback */ - pdev->dev.usr_cb->Init(); - - /* Enable Interrupts */ - USB_OTG_BSP_EnableInterrupt(pdev); -} - -/** -* @brief USBD_DeInit -* Re-Initialize th device library -* @param pdev: device instance -* @retval status: status -*/ -USBD_Status USBD_DeInit(USB_OTG_CORE_HANDLE *pdev) -{ - /* Software Init */ - - return USBD_OK; -} - -/** -* @brief USBD_SetupStage -* Handle the setup stage -* @param pdev: device instance -* @retval status -*/ -static uint8_t USBD_SetupStage(USB_OTG_CORE_HANDLE *pdev) -{ - USB_SETUP_REQ req; - - USBD_ParseSetupRequest(pdev , &req); - - switch (req.bmRequest & 0x1F) - { - case USB_REQ_RECIPIENT_DEVICE: - USBD_StdDevReq (pdev, &req); - break; - - case USB_REQ_RECIPIENT_INTERFACE: - USBD_StdItfReq(pdev, &req); - break; - - case USB_REQ_RECIPIENT_ENDPOINT: - USBD_StdEPReq(pdev, &req); - break; - - default: - DCD_EP_Stall(pdev , req.bmRequest & 0x80); - break; - } - return USBD_OK; -} - -/** -* @brief USBD_DataOutStage -* Handle data out stage -* @param pdev: device instance -* @param epnum: endpoint index -* @retval status -*/ -static uint8_t USBD_DataOutStage(USB_OTG_CORE_HANDLE *pdev , uint8_t epnum) -{ - USB_OTG_EP *ep; - - if(epnum == 0) - { - ep = &pdev->dev.out_ep[0]; - if ( pdev->dev.device_state == USB_OTG_EP0_DATA_OUT) - { - if(ep->rem_data_len > ep->maxpacket) - { - ep->rem_data_len -= ep->maxpacket; - - if(pdev->cfg.dma_enable == 1) - { - /* in slave mode this, is handled by the RxSTSQLvl ISR */ - ep->xfer_buff += ep->maxpacket; - } - USBD_CtlContinueRx (pdev, - ep->xfer_buff, - MIN(ep->rem_data_len ,ep->maxpacket)); - } - else - { - if((pdev->dev.class_cb->EP0_RxReady != NULL)&& - (pdev->dev.device_status == USB_OTG_CONFIGURED)) - { - pdev->dev.class_cb->EP0_RxReady(pdev); - } - USBD_CtlSendStatus(pdev); - } - } - } - else if((pdev->dev.class_cb->DataOut != NULL)&& - (pdev->dev.device_status == USB_OTG_CONFIGURED)) - { - pdev->dev.class_cb->DataOut(pdev, epnum); - } - return USBD_OK; -} - -/** -* @brief USBD_DataInStage -* Handle data in stage -* @param pdev: device instance -* @param epnum: endpoint index -* @retval status -*/ -static uint8_t USBD_DataInStage(USB_OTG_CORE_HANDLE *pdev , uint8_t epnum) -{ - USB_OTG_EP *ep; - - if(epnum == 0) - { - ep = &pdev->dev.in_ep[0]; - if ( pdev->dev.device_state == USB_OTG_EP0_DATA_IN) - { - if(ep->rem_data_len > ep->maxpacket) - { - ep->rem_data_len -= ep->maxpacket; - if(pdev->cfg.dma_enable == 1) - { - /* in slave mode this, is handled by the TxFifoEmpty ISR */ - ep->xfer_buff += ep->maxpacket; - } - USBD_CtlContinueSendData (pdev, - ep->xfer_buff, - ep->rem_data_len); - } - else - { /* last packet is MPS multiple, so send ZLP packet */ - if((ep->total_data_len % ep->maxpacket == 0) && - (ep->total_data_len >= ep->maxpacket) && - (ep->total_data_len < ep->ctl_data_len )) - { - - USBD_CtlContinueSendData(pdev , NULL, 0); - ep->ctl_data_len = 0; - } - else - { - if((pdev->dev.class_cb->EP0_TxSent != NULL)&& - (pdev->dev.device_status == USB_OTG_CONFIGURED)) - { - pdev->dev.class_cb->EP0_TxSent(pdev); - } - USBD_CtlReceiveStatus(pdev); - } - } - } - if (pdev->dev.test_mode == 1) - { - USBD_RunTestMode(pdev); - pdev->dev.test_mode = 0; - } - } - else if((pdev->dev.class_cb->DataIn != NULL)&& - (pdev->dev.device_status == USB_OTG_CONFIGURED)) - { - pdev->dev.class_cb->DataIn(pdev, epnum); - } - return USBD_OK; -} - - - - -/** -* @brief USBD_RunTestMode -* Launch test mode process -* @param pdev: device instance -* @retval status -*/ -static uint8_t USBD_RunTestMode (USB_OTG_CORE_HANDLE *pdev) -{ - USB_OTG_WRITE_REG32(&pdev->regs.DREGS->DCTL, SET_TEST_MODE.d32); - return USBD_OK; -} - -/** -* @brief USBD_Reset -* Handle Reset event -* @param pdev: device instance -* @retval status -*/ - -static uint8_t USBD_Reset(USB_OTG_CORE_HANDLE *pdev) -{ - /* Open EP0 OUT */ - DCD_EP_Open(pdev, - 0x00, - USB_OTG_MAX_EP0_SIZE, - EP_TYPE_CTRL); - - /* Open EP0 IN */ - DCD_EP_Open(pdev, - 0x80, - USB_OTG_MAX_EP0_SIZE, - EP_TYPE_CTRL); - - /* Upon Reset call usr call back */ - pdev->dev.device_status = USB_OTG_DEFAULT; - pdev->dev.usr_cb->DeviceReset(pdev->cfg.speed); - - return USBD_OK; -} - -/** -* @brief USBD_Resume -* Handle Resume event -* @param pdev: device instance -* @retval status -*/ - -static uint8_t USBD_Resume(USB_OTG_CORE_HANDLE *pdev) -{ - /* Upon Resume call usr call back */ - pdev->dev.usr_cb->DeviceResumed(); - pdev->dev.device_status = pdev->dev.device_old_status; - pdev->dev.device_status = USB_OTG_CONFIGURED; - return USBD_OK; -} - - -/** -* @brief USBD_Suspend -* Handle Suspend event -* @param pdev: device instance -* @retval status -*/ - -static uint8_t USBD_Suspend(USB_OTG_CORE_HANDLE *pdev) -{ - pdev->dev.device_old_status = pdev->dev.device_status; - pdev->dev.device_status = USB_OTG_SUSPENDED; - /* Upon Resume call usr call back */ - pdev->dev.usr_cb->DeviceSuspended(); - return USBD_OK; -} - - -/** -* @brief USBD_SOF -* Handle SOF event -* @param pdev: device instance -* @retval status -*/ - -static uint8_t USBD_SOF(USB_OTG_CORE_HANDLE *pdev) -{ - if(pdev->dev.class_cb->SOF) - { - pdev->dev.class_cb->SOF(pdev); - } - return USBD_OK; -} -/** -* @brief USBD_SetCfg -* Configure device and start the interface -* @param pdev: device instance -* @param cfgidx: configuration index -* @retval status -*/ - -USBD_Status USBD_SetCfg(USB_OTG_CORE_HANDLE *pdev, uint8_t cfgidx) -{ - pdev->dev.class_cb->Init(pdev, cfgidx); - - /* Upon set config call usr call back */ - pdev->dev.usr_cb->DeviceConfigured(); - return USBD_OK; -} - -/** -* @brief USBD_ClrCfg -* Clear current configuration -* @param pdev: device instance -* @param cfgidx: configuration index -* @retval status: USBD_Status -*/ -USBD_Status USBD_ClrCfg(USB_OTG_CORE_HANDLE *pdev, uint8_t cfgidx) -{ - pdev->dev.class_cb->DeInit(pdev, cfgidx); - return USBD_OK; -} - -/** -* @brief USBD_IsoINIncomplete -* Handle iso in incomplete event -* @param pdev: device instance -* @retval status -*/ -static uint8_t USBD_IsoINIncomplete(USB_OTG_CORE_HANDLE *pdev) -{ - pdev->dev.class_cb->IsoINIncomplete(pdev); - return USBD_OK; -} - -/** -* @brief USBD_IsoOUTIncomplete -* Handle iso out incomplete event -* @param pdev: device instance -* @retval status -*/ -static uint8_t USBD_IsoOUTIncomplete(USB_OTG_CORE_HANDLE *pdev) -{ - pdev->dev.class_cb->IsoOUTIncomplete(pdev); - return USBD_OK; -} - -#ifdef VBUS_SENSING_ENABLED -/** -* @brief USBD_DevConnected -* Handle device connection event -* @param pdev: device instance -* @retval status -*/ -static uint8_t USBD_DevConnected(USB_OTG_CORE_HANDLE *pdev) -{ - pdev->dev.usr_cb->DeviceConnected(); - pdev->dev.connection_status = 1; - return USBD_OK; -} - -/** -* @brief USBD_DevDisconnected -* Handle device disconnection event -* @param pdev: device instance -* @retval status -*/ -static uint8_t USBD_DevDisconnected(USB_OTG_CORE_HANDLE *pdev) -{ - pdev->dev.usr_cb->DeviceDisconnected(); - pdev->dev.class_cb->DeInit(pdev, 0); - pdev->dev.connection_status = 0; - return USBD_OK; -} -#endif -/** -* @} -*/ - - -/** -* @} -*/ - - -/** -* @} -*/ - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ - diff --git a/stm/lib/usbd_core.h b/stm/lib/usbd_core.h deleted file mode 100644 index 60d185b78..000000000 --- a/stm/lib/usbd_core.h +++ /dev/null @@ -1,120 +0,0 @@ -/** - ****************************************************************************** - * @file usbd_core.h - * @author MCD Application Team - * @version V1.1.0 - * @date 19-March-2012 - * @brief Header file for usbd_core.c - ****************************************************************************** - * @attention - * - *

© COPYRIGHT 2012 STMicroelectronics

- * - * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License"); - * You may not use this file except in compliance with the License. - * You may obtain a copy of the License at: - * - * http://www.st.com/software_license_agreement_liberty_v2 - * - * Unless required by applicable law or agreed to in writing, software - * distributed under the License is distributed on an "AS IS" BASIS, - * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - * See the License for the specific language governing permissions and - * limitations under the License. - * - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __USBD_CORE_H -#define __USBD_CORE_H - -/* Includes ------------------------------------------------------------------*/ -#include "usb_dcd.h" -#include "usbd_def.h" -//#include "usbd_conf.h" - -/** @addtogroup STM32_USB_OTG_DEVICE_LIBRARY - * @{ - */ - -/** @defgroup USBD_CORE - * @brief This file is the Header file for usbd_core.c file - * @{ - */ - - -/** @defgroup USBD_CORE_Exported_Defines - * @{ - */ - -typedef enum { - USBD_OK = 0, - USBD_BUSY, - USBD_FAIL, -}USBD_Status; -/** - * @} - */ - - -/** @defgroup USBD_CORE_Exported_TypesDefinitions - * @{ - */ - - -/** - * @} - */ - - - -/** @defgroup USBD_CORE_Exported_Macros - * @{ - */ - -/** - * @} - */ - -/** @defgroup USBD_CORE_Exported_Variables - * @{ - */ - -/** - * @} - */ - -/** @defgroup USBD_CORE_Exported_FunctionsPrototype - * @{ - */ -void USBD_Init(USB_OTG_CORE_HANDLE *pdev, - USB_OTG_CORE_ID_TypeDef coreID, - USBD_DEVICE *pDevice, - USBD_Class_cb_TypeDef *class_cb, - USBD_Usr_cb_TypeDef *usr_cb); - -USBD_Status USBD_DeInit(USB_OTG_CORE_HANDLE *pdev); - -USBD_Status USBD_ClrCfg(USB_OTG_CORE_HANDLE *pdev, uint8_t cfgidx); - -USBD_Status USBD_SetCfg(USB_OTG_CORE_HANDLE *pdev, uint8_t cfgidx); - -/** - * @} - */ - -#endif /* __USBD_CORE_H */ - -/** - * @} - */ - -/** -* @} -*/ - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ - - - diff --git a/stm/lib/usbd_def.h b/stm/lib/usbd_def.h deleted file mode 100644 index bdf72d249..000000000 --- a/stm/lib/usbd_def.h +++ /dev/null @@ -1,157 +0,0 @@ -/** - ****************************************************************************** - * @file usbd_def.h - * @author MCD Application Team - * @version V1.1.0 - * @date 19-March-2012 - * @brief general defines for the usb device library - ****************************************************************************** - * @attention - * - *

© COPYRIGHT 2012 STMicroelectronics

- * - * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License"); - * You may not use this file except in compliance with the License. - * You may obtain a copy of the License at: - * - * http://www.st.com/software_license_agreement_liberty_v2 - * - * Unless required by applicable law or agreed to in writing, software - * distributed under the License is distributed on an "AS IS" BASIS, - * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - * See the License for the specific language governing permissions and - * limitations under the License. - * - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ - -#ifndef __USBD_DEF_H -#define __USBD_DEF_H - -/* Includes ------------------------------------------------------------------*/ -//#include "usbd_conf.h" -#define USB_MAX_STR_DESC_SIZ 255 - -/** @addtogroup STM32_USB_OTG_DEVICE_LIBRARY - * @{ - */ - -/** @defgroup USB_DEF - * @brief general defines for the usb device library file - * @{ - */ - -/** @defgroup USB_DEF_Exported_Defines - * @{ - */ - -#ifndef NULL -#define NULL 0 -#endif - -#define USB_LEN_DEV_QUALIFIER_DESC 0x0A -#define USB_LEN_DEV_DESC 0x12 -#define USB_LEN_CFG_DESC 0x09 -#define USB_LEN_IF_DESC 0x09 -#define USB_LEN_EP_DESC 0x07 -#define USB_LEN_OTG_DESC 0x03 - -#define USBD_IDX_LANGID_STR 0x00 -#define USBD_IDX_MFC_STR 0x01 -#define USBD_IDX_PRODUCT_STR 0x02 -#define USBD_IDX_SERIAL_STR 0x03 -#define USBD_IDX_CONFIG_STR 0x04 -#define USBD_IDX_INTERFACE_STR 0x05 - -#define USB_REQ_TYPE_STANDARD 0x00 -#define USB_REQ_TYPE_CLASS 0x20 -#define USB_REQ_TYPE_VENDOR 0x40 -#define USB_REQ_TYPE_MASK 0x60 - -#define USB_REQ_RECIPIENT_DEVICE 0x00 -#define USB_REQ_RECIPIENT_INTERFACE 0x01 -#define USB_REQ_RECIPIENT_ENDPOINT 0x02 -#define USB_REQ_RECIPIENT_MASK 0x03 - -#define USB_REQ_GET_STATUS 0x00 -#define USB_REQ_CLEAR_FEATURE 0x01 -#define USB_REQ_SET_FEATURE 0x03 -#define USB_REQ_SET_ADDRESS 0x05 -#define USB_REQ_GET_DESCRIPTOR 0x06 -#define USB_REQ_SET_DESCRIPTOR 0x07 -#define USB_REQ_GET_CONFIGURATION 0x08 -#define USB_REQ_SET_CONFIGURATION 0x09 -#define USB_REQ_GET_INTERFACE 0x0A -#define USB_REQ_SET_INTERFACE 0x0B -#define USB_REQ_SYNCH_FRAME 0x0C - -#define USB_DESC_TYPE_DEVICE 1 -#define USB_DESC_TYPE_CONFIGURATION 2 -#define USB_DESC_TYPE_STRING 3 -#define USB_DESC_TYPE_INTERFACE 4 -#define USB_DESC_TYPE_ENDPOINT 5 -#define USB_DESC_TYPE_DEVICE_QUALIFIER 6 -#define USB_DESC_TYPE_OTHER_SPEED_CONFIGURATION 7 - - -#define USB_CONFIG_REMOTE_WAKEUP 2 -#define USB_CONFIG_SELF_POWERED 1 - -#define USB_FEATURE_EP_HALT 0 -#define USB_FEATURE_REMOTE_WAKEUP 1 -#define USB_FEATURE_TEST_MODE 2 - -/** - * @} - */ - - -/** @defgroup USBD_DEF_Exported_TypesDefinitions - * @{ - */ -/** - * @} - */ - - - -/** @defgroup USBD_DEF_Exported_Macros - * @{ - */ -#define SWAPBYTE(addr) (((uint16_t)(*((uint8_t *)(addr)))) + \ - (((uint16_t)(*(((uint8_t *)(addr)) + 1))) << 8)) - -#define LOBYTE(x) ((uint8_t)(x & 0x00FF)) -#define HIBYTE(x) ((uint8_t)((x & 0xFF00) >>8)) -/** - * @} - */ - -/** @defgroup USBD_DEF_Exported_Variables - * @{ - */ - -/** - * @} - */ - -/** @defgroup USBD_DEF_Exported_FunctionsPrototype - * @{ - */ - -/** - * @} - */ - -#endif /* __USBD_DEF_H */ - -/** - * @} - */ - -/** -* @} -*/ -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/stm/lib/usbd_desc.c b/stm/lib/usbd_desc.c deleted file mode 100644 index 1edbdbfac..000000000 --- a/stm/lib/usbd_desc.c +++ /dev/null @@ -1,331 +0,0 @@ -/** - ****************************************************************************** - * @file usbd_desc.c - * @author MCD Application Team - * @version V1.1.0 - * @date 19-March-2012 - * @brief This file provides the USBD descriptors and string formating method. - ****************************************************************************** - * @attention - * - *

© COPYRIGHT 2012 STMicroelectronics

- * - * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License"); - * You may not use this file except in compliance with the License. - * You may obtain a copy of the License at: - * - * http://www.st.com/software_license_agreement_liberty_v2 - * - * Unless required by applicable law or agreed to in writing, software - * distributed under the License is distributed on an "AS IS" BASIS, - * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - * See the License for the specific language governing permissions and - * limitations under the License. - * - ****************************************************************************** - */ - -/* Includes ------------------------------------------------------------------*/ -#include "usbd_core.h" -#include "usbd_desc.h" -#include "usbd_req.h" -#include "usb_regs.h" - -/** @addtogroup STM32_USB_OTG_DEVICE_LIBRARY - * @{ - */ - - -/** @defgroup USBD_DESC - * @brief USBD descriptors module - * @{ - */ - -/** @defgroup USBD_DESC_Private_TypesDefinitions - * @{ - */ -/** - * @} - */ - - -/** @defgroup USBD_DESC_Private_Defines - * @{ - */ -/* -#define USBD_VID 0x0483 // TODO set VID -#define USBD_PID 0x5720 // TODO set PID - -#define USBD_LANGID_STRING 0x409 -#define USBD_MANUFACTURER_STRING "STMicroelectronics" // TODO set -#define USBD_PRODUCT_HS_STRING "VCP/MSC in HS Mode" // TODO set -#define USBD_SERIALNUMBER_HS_STRING "00000000001A" // TODO set -#define USBD_PRODUCT_FS_STRING "VCP/MSC in FS Mode" // TODO set -#define USBD_SERIALNUMBER_FS_STRING "00000000001B" // TODO set -#define USBD_CONFIGURATION_HS_STRING "VCP/MSC Config" // TODO set -#define USBD_INTERFACE_HS_STRING "VCP/MSC Interface" // TODO set -#define USBD_CONFIGURATION_FS_STRING "VCP/MSC Config" // TODO set -#define USBD_INTERFACE_FS_STRING "VCP/MSC Interface" // TODO set -*/ -/** - * @} - */ - -// seems we need to use this VID/PID to get it to work on windows - -#define USBD_VID 0x0483 -#define USBD_PID 0x5740 - -#define USBD_LANGID_STRING 0x409 -#define USBD_MANUFACTURER_STRING "STMicroelectronics" -#define USBD_PRODUCT_HS_STRING "STM32 Virtual ComPort in HS mode" -#define USBD_SERIALNUMBER_HS_STRING "00000000050B" -#define USBD_PRODUCT_FS_STRING "STM32 Virtual ComPort in FS Mode" -#define USBD_SERIALNUMBER_FS_STRING "00000000050C" -#define USBD_CONFIGURATION_HS_STRING "VCP Config" -#define USBD_INTERFACE_HS_STRING "VCP Interface" -#define USBD_CONFIGURATION_FS_STRING "VCP Config" -#define USBD_INTERFACE_FS_STRING "VCP Interface" - - -/** @defgroup USBD_DESC_Private_Macros - * @{ - */ -/** - * @} - */ - - -/** @defgroup USBD_DESC_Private_Variables - * @{ - */ - -USBD_DEVICE USR_desc = -{ - USBD_USR_DeviceDescriptor, - USBD_USR_LangIDStrDescriptor, - USBD_USR_ManufacturerStrDescriptor, - USBD_USR_ProductStrDescriptor, - USBD_USR_SerialStrDescriptor, - USBD_USR_ConfigStrDescriptor, - USBD_USR_InterfaceStrDescriptor, - -}; - -#ifdef USB_OTG_HS_INTERNAL_DMA_ENABLED - #if defined ( __ICCARM__ ) /*!< IAR Compiler */ - #pragma data_alignment=4 - #endif -#endif /* USB_OTG_HS_INTERNAL_DMA_ENABLED */ -/* USB Standard Device Descriptor */ -__ALIGN_BEGIN static uint8_t USBD_DeviceDesc[USB_SIZ_DEVICE_DESC] __ALIGN_END = -{ - 0x12, // bLength - USB_DEVICE_DESCRIPTOR_TYPE, // bDescriptorType - 0x00, // bcdUSB: v2.0 - 0x02, - 0xef, // bDeviceClass: Miscellaneous Device Class - 0x02, // bDeviceSubClass: Common Class - 0x01, // bDeviceProtocol: Interface Association Descriptor - USB_OTG_MAX_EP0_SIZE, // bMaxPacketSize - LOBYTE(USBD_VID), // idVendor - HIBYTE(USBD_VID), // idVendor - LOBYTE(USBD_PID), // idVendor - HIBYTE(USBD_PID), // idVendor - 0x00, // bcdDevice: rel. 2.00 - 0x02, - USBD_IDX_MFC_STR, /*Index of manufacturer string*/ - USBD_IDX_PRODUCT_STR, /*Index of product string*/ - USBD_IDX_SERIAL_STR, /*Index of serial number string*/ - USBD_CFG_MAX_NUM // bNumConfigurations: 1 - } ; /* USB_DeviceDescriptor */ - -#ifdef USB_OTG_HS_INTERNAL_DMA_ENABLED - #if defined ( __ICCARM__ ) /*!< IAR Compiler */ - #pragma data_alignment=4 - #endif -#endif /* USB_OTG_HS_INTERNAL_DMA_ENABLED */ -/* USB Standard Device Descriptor */ -__ALIGN_BEGIN uint8_t USBD_DeviceQualifierDesc[USB_LEN_DEV_QUALIFIER_DESC] __ALIGN_END = -{ - USB_LEN_DEV_QUALIFIER_DESC, - USB_DESC_TYPE_DEVICE_QUALIFIER, - 0x00, - 0x02, - 0x00, - 0x00, - 0x00, - 0x40, - 0x01, - 0x00, -}; - -#ifdef USB_OTG_HS_INTERNAL_DMA_ENABLED - #if defined ( __ICCARM__ ) /*!< IAR Compiler */ - #pragma data_alignment=4 - #endif -#endif /* USB_OTG_HS_INTERNAL_DMA_ENABLED */ -/* USB Standard Device Descriptor */ -__ALIGN_BEGIN uint8_t USBD_LangIDDesc[USB_SIZ_STRING_LANGID] __ALIGN_END = -{ - USB_SIZ_STRING_LANGID, - USB_DESC_TYPE_STRING, - LOBYTE(USBD_LANGID_STRING), - HIBYTE(USBD_LANGID_STRING), -}; -/** - * @} - */ - - -/** @defgroup USBD_DESC_Private_FunctionPrototypes - * @{ - */ -/** - * @} - */ - - -/** @defgroup USBD_DESC_Private_Functions - * @{ - */ - -/** -* @brief USBD_USR_DeviceDescriptor -* return the device descriptor -* @param speed : current device speed -* @param length : pointer to data length variable -* @retval pointer to descriptor buffer -*/ -uint8_t * USBD_USR_DeviceDescriptor( uint8_t speed , uint16_t *length) -{ - *length = sizeof(USBD_DeviceDesc); - return USBD_DeviceDesc; -} - -/** -* @brief USBD_USR_LangIDStrDescriptor -* return the LangID string descriptor -* @param speed : current device speed -* @param length : pointer to data length variable -* @retval pointer to descriptor buffer -*/ -uint8_t * USBD_USR_LangIDStrDescriptor( uint8_t speed , uint16_t *length) -{ - *length = sizeof(USBD_LangIDDesc); - return USBD_LangIDDesc; -} - - -/** -* @brief USBD_USR_ProductStrDescriptor -* return the product string descriptor -* @param speed : current device speed -* @param length : pointer to data length variable -* @retval pointer to descriptor buffer -*/ -uint8_t * USBD_USR_ProductStrDescriptor( uint8_t speed , uint16_t *length) -{ - - - if(speed == 0) - { - USBD_GetString (USBD_PRODUCT_HS_STRING, USBD_StrDesc, length); - } - else - { - USBD_GetString (USBD_PRODUCT_FS_STRING, USBD_StrDesc, length); - } - return USBD_StrDesc; -} - -/** -* @brief USBD_USR_ManufacturerStrDescriptor -* return the manufacturer string descriptor -* @param speed : current device speed -* @param length : pointer to data length variable -* @retval pointer to descriptor buffer -*/ -uint8_t * USBD_USR_ManufacturerStrDescriptor( uint8_t speed , uint16_t *length) -{ - USBD_GetString (USBD_MANUFACTURER_STRING, USBD_StrDesc, length); - return USBD_StrDesc; -} - -/** -* @brief USBD_USR_SerialStrDescriptor -* return the serial number string descriptor -* @param speed : current device speed -* @param length : pointer to data length variable -* @retval pointer to descriptor buffer -*/ -uint8_t * USBD_USR_SerialStrDescriptor( uint8_t speed , uint16_t *length) -{ - if(speed == USB_OTG_SPEED_HIGH) - { - USBD_GetString (USBD_SERIALNUMBER_HS_STRING, USBD_StrDesc, length); - } - else - { - USBD_GetString (USBD_SERIALNUMBER_FS_STRING, USBD_StrDesc, length); - } - return USBD_StrDesc; -} - -/** -* @brief USBD_USR_ConfigStrDescriptor -* return the configuration string descriptor -* @param speed : current device speed -* @param length : pointer to data length variable -* @retval pointer to descriptor buffer -*/ -uint8_t * USBD_USR_ConfigStrDescriptor( uint8_t speed , uint16_t *length) -{ - if(speed == USB_OTG_SPEED_HIGH) - { - USBD_GetString (USBD_CONFIGURATION_HS_STRING, USBD_StrDesc, length); - } - else - { - USBD_GetString (USBD_CONFIGURATION_FS_STRING, USBD_StrDesc, length); - } - return USBD_StrDesc; -} - - -/** -* @brief USBD_USR_InterfaceStrDescriptor -* return the interface string descriptor -* @param speed : current device speed -* @param length : pointer to data length variable -* @retval pointer to descriptor buffer -*/ -uint8_t * USBD_USR_InterfaceStrDescriptor( uint8_t speed , uint16_t *length) -{ - if(speed == 0) - { - USBD_GetString (USBD_INTERFACE_HS_STRING, USBD_StrDesc, length); - } - else - { - USBD_GetString (USBD_INTERFACE_FS_STRING, USBD_StrDesc, length); - } - return USBD_StrDesc; -} - -/** - * @} - */ - - -/** - * @} - */ - - -/** - * @} - */ - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ - diff --git a/stm/lib/usbd_desc.h b/stm/lib/usbd_desc.h deleted file mode 100644 index c6da3158b..000000000 --- a/stm/lib/usbd_desc.h +++ /dev/null @@ -1,121 +0,0 @@ -/** - ****************************************************************************** - * @file usbd_desc.h - * @author MCD Application Team - * @version V1.1.0 - * @date 19-March-2012 - * @brief header file for the usbd_desc.c file - ****************************************************************************** - * @attention - * - *

© COPYRIGHT 2012 STMicroelectronics

- * - * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License"); - * You may not use this file except in compliance with the License. - * You may obtain a copy of the License at: - * - * http://www.st.com/software_license_agreement_liberty_v2 - * - * Unless required by applicable law or agreed to in writing, software - * distributed under the License is distributed on an "AS IS" BASIS, - * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - * See the License for the specific language governing permissions and - * limitations under the License. - * - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ - -#ifndef __USB_DESC_H -#define __USB_DESC_H - -/* Includes ------------------------------------------------------------------*/ -#include "usbd_def.h" - -/** @addtogroup STM32_USB_OTG_DEVICE_LIBRARY - * @{ - */ - -/** @defgroup USB_DESC - * @brief general defines for the usb device library file - * @{ - */ - -/** @defgroup USB_DESC_Exported_Defines - * @{ - */ -#define USB_DEVICE_DESCRIPTOR_TYPE 0x01 -#define USB_CONFIGURATION_DESCRIPTOR_TYPE 0x02 -#define USB_STRING_DESCRIPTOR_TYPE 0x03 -#define USB_INTERFACE_DESCRIPTOR_TYPE 0x04 -#define USB_ENDPOINT_DESCRIPTOR_TYPE 0x05 -#define USB_INTERFACE_ASSOCIATION_TYPE 0x0b -#define USB_SIZ_DEVICE_DESC 18 -#define USB_SIZ_STRING_LANGID 4 - -/** - * @} - */ - - -/** @defgroup USBD_DESC_Exported_TypesDefinitions - * @{ - */ -/** - * @} - */ - - - -/** @defgroup USBD_DESC_Exported_Macros - * @{ - */ -/** - * @} - */ - -/** @defgroup USBD_DESC_Exported_Variables - * @{ - */ -//extern uint8_t USBD_DeviceDesc [USB_SIZ_DEVICE_DESC]; -extern uint8_t USBD_StrDesc[USB_MAX_STR_DESC_SIZ]; -extern uint8_t USBD_OtherSpeedCfgDesc[USB_LEN_CFG_DESC]; -extern uint8_t USBD_DeviceQualifierDesc[USB_LEN_DEV_QUALIFIER_DESC]; -extern uint8_t USBD_LangIDDesc[USB_SIZ_STRING_LANGID]; -extern USBD_DEVICE USR_desc; -/** - * @} - */ - -/** @defgroup USBD_DESC_Exported_FunctionsPrototype - * @{ - */ - - -uint8_t * USBD_USR_DeviceDescriptor( uint8_t speed , uint16_t *length); -uint8_t * USBD_USR_LangIDStrDescriptor( uint8_t speed , uint16_t *length); -uint8_t * USBD_USR_ManufacturerStrDescriptor ( uint8_t speed , uint16_t *length); -uint8_t * USBD_USR_ProductStrDescriptor ( uint8_t speed , uint16_t *length); -uint8_t * USBD_USR_SerialStrDescriptor( uint8_t speed , uint16_t *length); -uint8_t * USBD_USR_ConfigStrDescriptor( uint8_t speed , uint16_t *length); -uint8_t * USBD_USR_InterfaceStrDescriptor( uint8_t speed , uint16_t *length); - -#ifdef USB_SUPPORT_USER_STRING_DESC -uint8_t * USBD_USR_USRStringDesc (uint8_t speed, uint8_t idx , uint16_t *length); -#endif /* USB_SUPPORT_USER_STRING_DESC */ - -/** - * @} - */ - -#endif /* __USBD_DESC_H */ - -/** - * @} - */ - -/** -* @} -*/ -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/stm/lib/usbd_ioreq.c b/stm/lib/usbd_ioreq.c deleted file mode 100644 index a9e4a8636..000000000 --- a/stm/lib/usbd_ioreq.c +++ /dev/null @@ -1,244 +0,0 @@ -/** - ****************************************************************************** - * @file usbd_ioreq.c - * @author MCD Application Team - * @version V1.1.0 - * @date 19-March-2012 - * @brief This file provides the IO requests APIs for control endpoints. - ****************************************************************************** - * @attention - * - *

© COPYRIGHT 2012 STMicroelectronics

- * - * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License"); - * You may not use this file except in compliance with the License. - * You may obtain a copy of the License at: - * - * http://www.st.com/software_license_agreement_liberty_v2 - * - * Unless required by applicable law or agreed to in writing, software - * distributed under the License is distributed on an "AS IS" BASIS, - * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - * See the License for the specific language governing permissions and - * limitations under the License. - * - ****************************************************************************** - */ - -/* Includes ------------------------------------------------------------------*/ -#include "usbd_ioreq.h" - -/** @addtogroup STM32_USB_OTG_DEVICE_LIBRARY - * @{ - */ - - -/** @defgroup USBD_IOREQ - * @brief control I/O requests module - * @{ - */ - -/** @defgroup USBD_IOREQ_Private_TypesDefinitions - * @{ - */ -/** - * @} - */ - - -/** @defgroup USBD_IOREQ_Private_Defines - * @{ - */ - -/** - * @} - */ - - -/** @defgroup USBD_IOREQ_Private_Macros - * @{ - */ -/** - * @} - */ - - -/** @defgroup USBD_IOREQ_Private_Variables - * @{ - */ - -/** - * @} - */ - - -/** @defgroup USBD_IOREQ_Private_FunctionPrototypes - * @{ - */ -/** - * @} - */ - - -/** @defgroup USBD_IOREQ_Private_Functions - * @{ - */ - -/** -* @brief USBD_CtlSendData -* send data on the ctl pipe -* @param pdev: device instance -* @param buff: pointer to data buffer -* @param len: length of data to be sent -* @retval status -*/ -USBD_Status USBD_CtlSendData (USB_OTG_CORE_HANDLE *pdev, - uint8_t *pbuf, - uint16_t len) -{ - USBD_Status ret = USBD_OK; - - pdev->dev.in_ep[0].total_data_len = len; - pdev->dev.in_ep[0].rem_data_len = len; - pdev->dev.device_state = USB_OTG_EP0_DATA_IN; - - DCD_EP_Tx (pdev, 0, pbuf, len); - - return ret; -} - -/** -* @brief USBD_CtlContinueSendData -* continue sending data on the ctl pipe -* @param pdev: device instance -* @param buff: pointer to data buffer -* @param len: length of data to be sent -* @retval status -*/ -USBD_Status USBD_CtlContinueSendData (USB_OTG_CORE_HANDLE *pdev, - uint8_t *pbuf, - uint16_t len) -{ - USBD_Status ret = USBD_OK; - - DCD_EP_Tx (pdev, 0, pbuf, len); - - - return ret; -} - -/** -* @brief USBD_CtlPrepareRx -* receive data on the ctl pipe -* @param pdev: USB OTG device instance -* @param buff: pointer to data buffer -* @param len: length of data to be received -* @retval status -*/ -USBD_Status USBD_CtlPrepareRx (USB_OTG_CORE_HANDLE *pdev, - uint8_t *pbuf, - uint16_t len) -{ - USBD_Status ret = USBD_OK; - - pdev->dev.out_ep[0].total_data_len = len; - pdev->dev.out_ep[0].rem_data_len = len; - pdev->dev.device_state = USB_OTG_EP0_DATA_OUT; - - DCD_EP_PrepareRx (pdev, - 0, - pbuf, - len); - - - return ret; -} - -/** -* @brief USBD_CtlContinueRx -* continue receive data on the ctl pipe -* @param pdev: USB OTG device instance -* @param buff: pointer to data buffer -* @param len: length of data to be received -* @retval status -*/ -USBD_Status USBD_CtlContinueRx (USB_OTG_CORE_HANDLE *pdev, - uint8_t *pbuf, - uint16_t len) -{ - USBD_Status ret = USBD_OK; - - DCD_EP_PrepareRx (pdev, - 0, - pbuf, - len); - return ret; -} -/** -* @brief USBD_CtlSendStatus -* send zero lzngth packet on the ctl pipe -* @param pdev: USB OTG device instance -* @retval status -*/ -USBD_Status USBD_CtlSendStatus (USB_OTG_CORE_HANDLE *pdev) -{ - USBD_Status ret = USBD_OK; - pdev->dev.device_state = USB_OTG_EP0_STATUS_IN; - DCD_EP_Tx (pdev, - 0, - NULL, - 0); - - USB_OTG_EP0_OutStart(pdev); - - return ret; -} - -/** -* @brief USBD_CtlReceiveStatus -* receive zero lzngth packet on the ctl pipe -* @param pdev: USB OTG device instance -* @retval status -*/ -USBD_Status USBD_CtlReceiveStatus (USB_OTG_CORE_HANDLE *pdev) -{ - USBD_Status ret = USBD_OK; - pdev->dev.device_state = USB_OTG_EP0_STATUS_OUT; - DCD_EP_PrepareRx ( pdev, - 0, - NULL, - 0); - - USB_OTG_EP0_OutStart(pdev); - - return ret; -} - - -/** -* @brief USBD_GetRxCount -* returns the received data length -* @param pdev: USB OTG device instance -* epnum: endpoint index -* @retval Rx Data blength -*/ -uint16_t USBD_GetRxCount (USB_OTG_CORE_HANDLE *pdev , uint8_t epnum) -{ - return pdev->dev.out_ep[epnum].xfer_count; -} - -/** - * @} - */ - - -/** - * @} - */ - - -/** - * @} - */ - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/stm/lib/usbd_ioreq.h b/stm/lib/usbd_ioreq.h deleted file mode 100644 index 3f6aea1a9..000000000 --- a/stm/lib/usbd_ioreq.h +++ /dev/null @@ -1,121 +0,0 @@ -/** - ****************************************************************************** - * @file usbd_ioreq.h - * @author MCD Application Team - * @version V1.1.0 - * @date 19-March-2012 - * @brief header file for the usbd_ioreq.c file - ****************************************************************************** - * @attention - * - *

© COPYRIGHT 2012 STMicroelectronics

- * - * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License"); - * You may not use this file except in compliance with the License. - * You may obtain a copy of the License at: - * - * http://www.st.com/software_license_agreement_liberty_v2 - * - * Unless required by applicable law or agreed to in writing, software - * distributed under the License is distributed on an "AS IS" BASIS, - * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - * See the License for the specific language governing permissions and - * limitations under the License. - * - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ - -#ifndef __USBD_IOREQ_H_ -#define __USBD_IOREQ_H_ - -/* Includes ------------------------------------------------------------------*/ -#include "usbd_def.h" -#include "usbd_core.h" - -/** @addtogroup STM32_USB_OTG_DEVICE_LIBRARY - * @{ - */ - -/** @defgroup USBD_IOREQ - * @brief header file for the usbd_ioreq.c file - * @{ - */ - -/** @defgroup USBD_IOREQ_Exported_Defines - * @{ - */ -/** - * @} - */ - - -/** @defgroup USBD_IOREQ_Exported_Types - * @{ - */ - - -/** - * @} - */ - - - -/** @defgroup USBD_IOREQ_Exported_Macros - * @{ - */ - -/** - * @} - */ - -/** @defgroup USBD_IOREQ_Exported_Variables - * @{ - */ - -/** - * @} - */ - -/** @defgroup USBD_IOREQ_Exported_FunctionsPrototype - * @{ - */ - -USBD_Status USBD_CtlSendData (USB_OTG_CORE_HANDLE *pdev, - uint8_t *buf, - uint16_t len); - -USBD_Status USBD_CtlContinueSendData (USB_OTG_CORE_HANDLE *pdev, - uint8_t *pbuf, - uint16_t len); - -USBD_Status USBD_CtlPrepareRx (USB_OTG_CORE_HANDLE *pdev, - uint8_t *pbuf, - uint16_t len); - -USBD_Status USBD_CtlContinueRx (USB_OTG_CORE_HANDLE *pdev, - uint8_t *pbuf, - uint16_t len); - -USBD_Status USBD_CtlSendStatus (USB_OTG_CORE_HANDLE *pdev); - -USBD_Status USBD_CtlReceiveStatus (USB_OTG_CORE_HANDLE *pdev); - -uint16_t USBD_GetRxCount (USB_OTG_CORE_HANDLE *pdev , - uint8_t epnum); - -/** - * @} - */ - -#endif /* __USBD_IOREQ_H_ */ - -/** - * @} - */ - -/** -* @} -*/ -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/stm/lib/usbd_msc_bot.c b/stm/lib/usbd_msc_bot.c deleted file mode 100644 index 20dbc4863..000000000 --- a/stm/lib/usbd_msc_bot.c +++ /dev/null @@ -1,401 +0,0 @@ -/** - ****************************************************************************** - * @file usbd_msc_bot.c - * @author MCD Application Team - * @version V1.1.0 - * @date 19-March-2012 - * @brief This file provides all the BOT protocol core functions. - ****************************************************************************** - * @attention - * - *

© COPYRIGHT 2012 STMicroelectronics

- * - * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License"); - * You may not use this file except in compliance with the License. - * You may obtain a copy of the License at: - * - * http://www.st.com/software_license_agreement_liberty_v2 - * - * Unless required by applicable law or agreed to in writing, software - * distributed under the License is distributed on an "AS IS" BASIS, - * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - * See the License for the specific language governing permissions and - * limitations under the License. - * - ****************************************************************************** - */ - -/* Includes ------------------------------------------------------------------*/ -#include "usbd_msc_bot.h" -#include "usbd_msc_scsi.h" -#include "usbd_ioreq.h" -#include "usbd_msc_mem.h" -#include "usbd_conf.h" - -/** @addtogroup STM32_USB_OTG_DEVICE_LIBRARY - * @{ - */ - - -/** @defgroup MSC_BOT - * @brief BOT protocol module - * @{ - */ - -/** @defgroup MSC_BOT_Private_TypesDefinitions - * @{ - */ -/** - * @} - */ - - -/** @defgroup MSC_BOT_Private_Defines - * @{ - */ - -/** - * @} - */ - - -/** @defgroup MSC_BOT_Private_Macros - * @{ - */ -/** - * @} - */ - - -/** @defgroup MSC_BOT_Private_Variables - * @{ - */ -uint16_t MSC_BOT_DataLen; -uint8_t MSC_BOT_State; -uint8_t MSC_BOT_Status; - -#ifdef USB_OTG_HS_INTERNAL_DMA_ENABLED - #if defined ( __ICCARM__ ) /*!< IAR Compiler */ - #pragma data_alignment=4 - #endif -#endif /* USB_OTG_HS_INTERNAL_DMA_ENABLED */ -__ALIGN_BEGIN uint8_t MSC_BOT_Data[MSC_MEDIA_PACKET] __ALIGN_END ; - -#ifdef USB_OTG_HS_INTERNAL_DMA_ENABLED - #if defined ( __ICCARM__ ) /*!< IAR Compiler */ - #pragma data_alignment=4 - #endif -#endif /* USB_OTG_HS_INTERNAL_DMA_ENABLED */ -__ALIGN_BEGIN MSC_BOT_CBW_TypeDef MSC_BOT_cbw __ALIGN_END ; - -#ifdef USB_OTG_HS_INTERNAL_DMA_ENABLED - #if defined ( __ICCARM__ ) /*!< IAR Compiler */ - #pragma data_alignment=4 - #endif -#endif /* USB_OTG_HS_INTERNAL_DMA_ENABLED */ -__ALIGN_BEGIN MSC_BOT_CSW_TypeDef MSC_BOT_csw __ALIGN_END ; -/** - * @} - */ - - -/** @defgroup MSC_BOT_Private_FunctionPrototypes - * @{ - */ -static void MSC_BOT_CBW_Decode (USB_OTG_CORE_HANDLE *pdev); - -static void MSC_BOT_SendData (USB_OTG_CORE_HANDLE *pdev, - uint8_t* pbuf, - uint16_t len); - -static void MSC_BOT_Abort(USB_OTG_CORE_HANDLE *pdev); -/** - * @} - */ - - -/** @defgroup MSC_BOT_Private_Functions - * @{ - */ - - - -/** -* @brief MSC_BOT_Init -* Initialize the BOT Process -* @param pdev: device instance -* @retval None -*/ -void MSC_BOT_Init (USB_OTG_CORE_HANDLE *pdev) -{ - MSC_BOT_State = BOT_IDLE; - MSC_BOT_Status = BOT_STATE_NORMAL; - USBD_STORAGE_fops->Init(0); - - DCD_EP_Flush(pdev, MSC_OUT_EP); - DCD_EP_Flush(pdev, MSC_IN_EP); - /* Prapare EP to Receive First BOT Cmd */ - DCD_EP_PrepareRx (pdev, - MSC_OUT_EP, - (uint8_t *)&MSC_BOT_cbw, - BOT_CBW_LENGTH); -} - -/** -* @brief MSC_BOT_Reset -* Reset the BOT Machine -* @param pdev: device instance -* @retval None -*/ -void MSC_BOT_Reset (USB_OTG_CORE_HANDLE *pdev) -{ - MSC_BOT_State = BOT_IDLE; - MSC_BOT_Status = BOT_STATE_RECOVERY; - /* Prapare EP to Receive First BOT Cmd */ - DCD_EP_PrepareRx (pdev, - MSC_OUT_EP, - (uint8_t *)&MSC_BOT_cbw, - BOT_CBW_LENGTH); -} - -/** -* @brief MSC_BOT_DeInit -* Uninitialize the BOT Machine -* @param pdev: device instance -* @retval None -*/ -void MSC_BOT_DeInit (USB_OTG_CORE_HANDLE *pdev) -{ - MSC_BOT_State = BOT_IDLE; -} - -/** -* @brief MSC_BOT_DataIn -* Handle BOT IN data stage -* @param pdev: device instance -* @param epnum: endpoint index -* @retval None -*/ -void MSC_BOT_DataIn (USB_OTG_CORE_HANDLE *pdev, - uint8_t epnum) -{ - - switch (MSC_BOT_State) - { - case BOT_DATA_IN: - if(SCSI_ProcessCmd(pdev, - MSC_BOT_cbw.bLUN, - &MSC_BOT_cbw.CB[0]) < 0) - { - MSC_BOT_SendCSW (pdev, CSW_CMD_FAILED); - } - break; - - case BOT_SEND_DATA: - case BOT_LAST_DATA_IN: - MSC_BOT_SendCSW (pdev, CSW_CMD_PASSED); - - break; - - default: - break; - } -} -/** -* @brief MSC_BOT_DataOut -* Proccess MSC OUT data -* @param pdev: device instance -* @param epnum: endpoint index -* @retval None -*/ -void MSC_BOT_DataOut (USB_OTG_CORE_HANDLE *pdev, - uint8_t epnum) -{ - switch (MSC_BOT_State) - { - case BOT_IDLE: - MSC_BOT_CBW_Decode(pdev); - break; - - case BOT_DATA_OUT: - - if(SCSI_ProcessCmd(pdev, - MSC_BOT_cbw.bLUN, - &MSC_BOT_cbw.CB[0]) < 0) - { - MSC_BOT_SendCSW (pdev, CSW_CMD_FAILED); - } - - break; - - default: - break; - } - -} - -/** -* @brief MSC_BOT_CBW_Decode -* Decode the CBW command and set the BOT state machine accordingtly -* @param pdev: device instance -* @retval None -*/ -static void MSC_BOT_CBW_Decode (USB_OTG_CORE_HANDLE *pdev) -{ - - MSC_BOT_csw.dTag = MSC_BOT_cbw.dTag; - MSC_BOT_csw.dDataResidue = MSC_BOT_cbw.dDataLength; - - if ((USBD_GetRxCount (pdev ,MSC_OUT_EP) != BOT_CBW_LENGTH) || - (MSC_BOT_cbw.dSignature != BOT_CBW_SIGNATURE)|| - (MSC_BOT_cbw.bLUN > 1) || - (MSC_BOT_cbw.bCBLength < 1) || - (MSC_BOT_cbw.bCBLength > 16)) - { - - SCSI_SenseCode(MSC_BOT_cbw.bLUN, - ILLEGAL_REQUEST, - INVALID_CDB); - MSC_BOT_Status = BOT_STATE_ERROR; - MSC_BOT_Abort(pdev); - - } - else - { - if(SCSI_ProcessCmd(pdev, - MSC_BOT_cbw.bLUN, - &MSC_BOT_cbw.CB[0]) < 0) - { - MSC_BOT_Abort(pdev); - } - /*Burst xfer handled internally*/ - else if ((MSC_BOT_State != BOT_DATA_IN) && - (MSC_BOT_State != BOT_DATA_OUT) && - (MSC_BOT_State != BOT_LAST_DATA_IN)) - { - if (MSC_BOT_DataLen > 0) - { - MSC_BOT_SendData(pdev, - MSC_BOT_Data, - MSC_BOT_DataLen); - } - else if (MSC_BOT_DataLen == 0) - { - MSC_BOT_SendCSW (pdev, - CSW_CMD_PASSED); - } - } - } -} - -/** -* @brief MSC_BOT_SendData -* Send the requested data -* @param pdev: device instance -* @param buf: pointer to data buffer -* @param len: Data Length -* @retval None -*/ -static void MSC_BOT_SendData(USB_OTG_CORE_HANDLE *pdev, - uint8_t* buf, - uint16_t len) -{ - - len = MIN (MSC_BOT_cbw.dDataLength, len); - MSC_BOT_csw.dDataResidue -= len; - MSC_BOT_csw.bStatus = CSW_CMD_PASSED; - MSC_BOT_State = BOT_SEND_DATA; - - DCD_EP_Tx (pdev, MSC_IN_EP, buf, len); -} - -/** -* @brief MSC_BOT_SendCSW -* Send the Command Status Wrapper -* @param pdev: device instance -* @param status : CSW status -* @retval None -*/ -void MSC_BOT_SendCSW (USB_OTG_CORE_HANDLE *pdev, - uint8_t CSW_Status) -{ - MSC_BOT_csw.dSignature = BOT_CSW_SIGNATURE; - MSC_BOT_csw.bStatus = CSW_Status; - MSC_BOT_State = BOT_IDLE; - - DCD_EP_Tx (pdev, - MSC_IN_EP, - (uint8_t *)&MSC_BOT_csw, - BOT_CSW_LENGTH); - - /* Prapare EP to Receive next Cmd */ - DCD_EP_PrepareRx (pdev, - MSC_OUT_EP, - (uint8_t *)&MSC_BOT_cbw, - BOT_CBW_LENGTH); - -} - -/** -* @brief MSC_BOT_Abort -* Abort the current transfer -* @param pdev: device instance -* @retval status -*/ - -static void MSC_BOT_Abort (USB_OTG_CORE_HANDLE *pdev) -{ - - if ((MSC_BOT_cbw.bmFlags == 0) && - (MSC_BOT_cbw.dDataLength != 0) && - (MSC_BOT_Status == BOT_STATE_NORMAL) ) - { - DCD_EP_Stall(pdev, MSC_OUT_EP ); - } - DCD_EP_Stall(pdev, MSC_IN_EP); - - if(MSC_BOT_Status == BOT_STATE_ERROR) - { - DCD_EP_PrepareRx (pdev, - MSC_OUT_EP, - (uint8_t *)&MSC_BOT_cbw, - BOT_CBW_LENGTH); - } -} - -/** -* @brief MSC_BOT_CplClrFeature -* Complete the clear feature request -* @param pdev: device instance -* @param epnum: endpoint index -* @retval None -*/ - -void MSC_BOT_CplClrFeature (USB_OTG_CORE_HANDLE *pdev, uint8_t epnum) -{ - if(MSC_BOT_Status == BOT_STATE_ERROR )/* Bad CBW Signature */ - { - DCD_EP_Stall(pdev, MSC_IN_EP); - MSC_BOT_Status = BOT_STATE_NORMAL; - } - else if(((epnum & 0x80) == 0x80) && ( MSC_BOT_Status != BOT_STATE_RECOVERY)) - { - MSC_BOT_SendCSW (pdev, CSW_CMD_FAILED); - } - -} -/** - * @} - */ - - -/** - * @} - */ - - -/** - * @} - */ - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/stm/lib/usbd_msc_bot.h b/stm/lib/usbd_msc_bot.h deleted file mode 100644 index 53c95fbe4..000000000 --- a/stm/lib/usbd_msc_bot.h +++ /dev/null @@ -1,153 +0,0 @@ -/** - ****************************************************************************** - * @file usbd_msc_bot.h - * @author MCD Application Team - * @version V1.1.0 - * @date 19-March-2012 - * @brief header for the usbd_msc_bot.c file - ****************************************************************************** - * @attention - * - *

© COPYRIGHT 2012 STMicroelectronics

- * - * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License"); - * You may not use this file except in compliance with the License. - * You may obtain a copy of the License at: - * - * http://www.st.com/software_license_agreement_liberty_v2 - * - * Unless required by applicable law or agreed to in writing, software - * distributed under the License is distributed on an "AS IS" BASIS, - * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - * See the License for the specific language governing permissions and - * limitations under the License. - * - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ - -#include "usbd_core.h" - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __USBD_MSC_BOT_H -#define __USBD_MSC_BOT_H - -/** @addtogroup STM32_USB_OTG_DEVICE_LIBRARY - * @{ - */ - -/** @defgroup MSC_BOT - * @brief This file is the Header file for usbd_bot.c - * @{ - */ - - -/** @defgroup USBD_CORE_Exported_Defines - * @{ - */ -#define BOT_IDLE 0 /* Idle state */ -#define BOT_DATA_OUT 1 /* Data Out state */ -#define BOT_DATA_IN 2 /* Data In state */ -#define BOT_LAST_DATA_IN 3 /* Last Data In Last */ -#define BOT_SEND_DATA 4 /* Send Immediate data */ - -#define BOT_CBW_SIGNATURE 0x43425355 -#define BOT_CSW_SIGNATURE 0x53425355 -#define BOT_CBW_LENGTH 31 -#define BOT_CSW_LENGTH 13 - -/* CSW Status Definitions */ -#define CSW_CMD_PASSED 0x00 -#define CSW_CMD_FAILED 0x01 -#define CSW_PHASE_ERROR 0x02 - -/* BOT Status */ -#define BOT_STATE_NORMAL 0 -#define BOT_STATE_RECOVERY 1 -#define BOT_STATE_ERROR 2 - - -#define DIR_IN 0 -#define DIR_OUT 1 -#define BOTH_DIR 2 - -/** - * @} - */ - -/** @defgroup MSC_CORE_Private_TypesDefinitions - * @{ - */ - -typedef struct _MSC_BOT_CBW -{ - uint32_t dSignature; - uint32_t dTag; - uint32_t dDataLength; - uint8_t bmFlags; - uint8_t bLUN; - uint8_t bCBLength; - uint8_t CB[16]; -} -MSC_BOT_CBW_TypeDef; - - -typedef struct _MSC_BOT_CSW -{ - uint32_t dSignature; - uint32_t dTag; - uint32_t dDataResidue; - uint8_t bStatus; -} -MSC_BOT_CSW_TypeDef; - -/** - * @} - */ - - -/** @defgroup USBD_CORE_Exported_Types - * @{ - */ - -extern uint8_t MSC_BOT_Data[]; -extern uint16_t MSC_BOT_DataLen; -extern uint8_t MSC_BOT_State; -extern uint8_t MSC_BOT_BurstMode; -extern MSC_BOT_CBW_TypeDef MSC_BOT_cbw; -extern MSC_BOT_CSW_TypeDef MSC_BOT_csw; -/** - * @} - */ -/** @defgroup USBD_CORE_Exported_FunctionsPrototypes - * @{ - */ -void MSC_BOT_Init (USB_OTG_CORE_HANDLE *pdev); -void MSC_BOT_Reset (USB_OTG_CORE_HANDLE *pdev); -void MSC_BOT_DeInit (USB_OTG_CORE_HANDLE *pdev); -void MSC_BOT_DataIn (USB_OTG_CORE_HANDLE *pdev, - uint8_t epnum); - -void MSC_BOT_DataOut (USB_OTG_CORE_HANDLE *pdev, - uint8_t epnum); - -void MSC_BOT_SendCSW (USB_OTG_CORE_HANDLE *pdev, - uint8_t CSW_Status); - -void MSC_BOT_CplClrFeature (USB_OTG_CORE_HANDLE *pdev, - uint8_t epnum); -/** - * @} - */ - -#endif /* __USBD_MSC_BOT_H */ -/** - * @} - */ - -/** -* @} -*/ -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ - diff --git a/stm/lib/usbd_msc_data.c b/stm/lib/usbd_msc_data.c deleted file mode 100644 index 1dc7d22e7..000000000 --- a/stm/lib/usbd_msc_data.c +++ /dev/null @@ -1,134 +0,0 @@ -/** - ****************************************************************************** - * @file usbd_msc_data.c - * @author MCD Application Team - * @version V1.1.0 - * @date 19-March-2012 - * @brief This file provides all the vital inquiry pages and sense data. - ****************************************************************************** - * @attention - * - *

© COPYRIGHT 2012 STMicroelectronics

- * - * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License"); - * You may not use this file except in compliance with the License. - * You may obtain a copy of the License at: - * - * http://www.st.com/software_license_agreement_liberty_v2 - * - * Unless required by applicable law or agreed to in writing, software - * distributed under the License is distributed on an "AS IS" BASIS, - * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - * See the License for the specific language governing permissions and - * limitations under the License. - * - ****************************************************************************** - */ - -/* Includes ------------------------------------------------------------------*/ -#include "usbd_msc_data.h" - - -/** @addtogroup STM32_USB_OTG_DEVICE_LIBRARY - * @{ - */ - - -/** @defgroup MSC_DATA - * @brief Mass storage info/data module - * @{ - */ - -/** @defgroup MSC_DATA_Private_TypesDefinitions - * @{ - */ -/** - * @} - */ - - -/** @defgroup MSC_DATA_Private_Defines - * @{ - */ -/** - * @} - */ - - -/** @defgroup MSC_DATA_Private_Macros - * @{ - */ -/** - * @} - */ - - -/** @defgroup MSC_DATA_Private_Variables - * @{ - */ - - -/* USB Mass storage Page 0 Inquiry Data */ -const uint8_t MSC_Page00_Inquiry_Data[] = {//7 - 0x00, - 0x00, - 0x00, - (LENGTH_INQUIRY_PAGE00 - 4), - 0x00, - 0x80, - 0x83 -}; -/* USB Mass storage sense 6 Data */ -const uint8_t MSC_Mode_Sense6_data[] = { - 0x00, - 0x00, - 0x00, - 0x00, - 0x00, - 0x00, - 0x00, - 0x00 -}; -/* USB Mass storage sense 10 Data */ -const uint8_t MSC_Mode_Sense10_data[] = { - 0x00, - 0x06, - 0x00, - 0x00, - 0x00, - 0x00, - 0x00, - 0x00 -}; -/** - * @} - */ - - -/** @defgroup MSC_DATA_Private_FunctionPrototypes - * @{ - */ -/** - * @} - */ - - -/** @defgroup MSC_DATA_Private_Functions - * @{ - */ - -/** - * @} - */ - - -/** - * @} - */ - - -/** - * @} - */ - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/stm/lib/usbd_msc_data.h b/stm/lib/usbd_msc_data.h deleted file mode 100644 index 7c0d13679..000000000 --- a/stm/lib/usbd_msc_data.h +++ /dev/null @@ -1,105 +0,0 @@ -/** - ****************************************************************************** - * @file usbd_msc_data.h - * @author MCD Application Team - * @version V1.1.0 - * @date 19-March-2012 - * @brief header for the usbd_msc_data.c file - ****************************************************************************** - * @attention - * - *

© COPYRIGHT 2012 STMicroelectronics

- * - * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License"); - * You may not use this file except in compliance with the License. - * You may obtain a copy of the License at: - * - * http://www.st.com/software_license_agreement_liberty_v2 - * - * Unless required by applicable law or agreed to in writing, software - * distributed under the License is distributed on an "AS IS" BASIS, - * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - * See the License for the specific language governing permissions and - * limitations under the License. - * - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ - -#ifndef _USBD_MSC_DATA_H_ -#define _USBD_MSC_DATA_H_ - -/* Includes ------------------------------------------------------------------*/ -#include "usb_conf.h" -//#include "usbd_conf.h" - -/** @addtogroup STM32_USB_OTG_DEVICE_LIBRARY - * @{ - */ - -/** @defgroup USB_INFO - * @brief general defines for the usb device library file - * @{ - */ - -/** @defgroup USB_INFO_Exported_Defines - * @{ - */ -#define MODE_SENSE6_LEN 8 -#define MODE_SENSE10_LEN 8 -#define LENGTH_INQUIRY_PAGE00 7 -#define LENGTH_FORMAT_CAPACITIES 20 - -/** - * @} - */ - - -/** @defgroup USBD_INFO_Exported_TypesDefinitions - * @{ - */ -/** - * @} - */ - - - -/** @defgroup USBD_INFO_Exported_Macros - * @{ - */ - -/** - * @} - */ - -/** @defgroup USBD_INFO_Exported_Variables - * @{ - */ -extern const uint8_t MSC_Page00_Inquiry_Data[]; -extern const uint8_t MSC_Mode_Sense6_data[]; -extern const uint8_t MSC_Mode_Sense10_data[] ; - -/** - * @} - */ - -/** @defgroup USBD_INFO_Exported_FunctionsPrototype - * @{ - */ - -/** - * @} - */ - -#endif /* _USBD_MSC_DATA_H_ */ - -/** - * @} - */ - -/** -* @} -*/ - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/stm/lib/usbd_msc_mem.h b/stm/lib/usbd_msc_mem.h deleted file mode 100644 index 888c79674..000000000 --- a/stm/lib/usbd_msc_mem.h +++ /dev/null @@ -1,113 +0,0 @@ -/** - ****************************************************************************** - * @file usbd_msc_mem.h - * @author MCD Application Team - * @version V1.1.0 - * @date 19-March-2012 - * @brief header for the STORAGE DISK file file - ****************************************************************************** - * @attention - * - *

© COPYRIGHT 2012 STMicroelectronics

- * - * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License"); - * You may not use this file except in compliance with the License. - * You may obtain a copy of the License at: - * - * http://www.st.com/software_license_agreement_liberty_v2 - * - * Unless required by applicable law or agreed to in writing, software - * distributed under the License is distributed on an "AS IS" BASIS, - * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - * See the License for the specific language governing permissions and - * limitations under the License. - * - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ - -#ifndef __USBD_MEM_H -#define __USBD_MEM_H -/* Includes ------------------------------------------------------------------*/ -#include "usb_conf.h" -#include "usbd_def.h" - - -/** @addtogroup STM32_USB_OTG_DEVICE_LIBRARY - * @{ - */ - -/** @defgroup USBD_MEM - * @brief header file for the storage disk file - * @{ - */ - -/** @defgroup USBD_MEM_Exported_Defines - * @{ - */ -#define USBD_STD_INQUIRY_LENGTH 36 -/** - * @} - */ - - -/** @defgroup USBD_MEM_Exported_TypesDefinitions - * @{ - */ - -typedef struct _USBD_STORAGE -{ - int8_t (* Init) (uint8_t lun); - int8_t (* GetCapacity) (uint8_t lun, uint32_t *block_num, uint32_t *block_size); - int8_t (* IsReady) (uint8_t lun); - int8_t (* IsWriteProtected) (uint8_t lun); - int8_t (* Read) (uint8_t lun, uint8_t *buf, uint32_t blk_addr, uint16_t blk_len); - int8_t (* Write)(uint8_t lun, uint8_t *buf, uint32_t blk_addr, uint16_t blk_len); - int8_t (* GetMaxLun)(void); - int8_t *pInquiry; - -}USBD_STORAGE_cb_TypeDef; -/** - * @} - */ - - - -/** @defgroup USBD_MEM_Exported_Macros - * @{ - */ - -/** - * @} - */ - -/** @defgroup USBD_MEM_Exported_Variables - * @{ - */ - -/** - * @} - */ - -/** @defgroup USBD_MEM_Exported_FunctionsPrototype - * @{ - */ -extern USBD_STORAGE_cb_TypeDef *USBD_STORAGE_fops; -/** - * @} - */ - -#endif /* __USBD_MEM_H */ -/** - * @} - */ - -/** - * @} - */ - -/** -* @} -*/ -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/stm/lib/usbd_msc_scsi.c b/stm/lib/usbd_msc_scsi.c deleted file mode 100644 index e1e557f54..000000000 --- a/stm/lib/usbd_msc_scsi.c +++ /dev/null @@ -1,729 +0,0 @@ -/** - ****************************************************************************** - * @file usbd_msc_scsi.c - * @author MCD Application Team - * @version V1.1.0 - * @date 19-March-2012 - * @brief This file provides all the USBD SCSI layer functions. - ****************************************************************************** - * @attention - * - *

© COPYRIGHT 2012 STMicroelectronics

- * - * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License"); - * You may not use this file except in compliance with the License. - * You may obtain a copy of the License at: - * - * http://www.st.com/software_license_agreement_liberty_v2 - * - * Unless required by applicable law or agreed to in writing, software - * distributed under the License is distributed on an "AS IS" BASIS, - * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - * See the License for the specific language governing permissions and - * limitations under the License. - * - ****************************************************************************** - */ - -/* Includes ------------------------------------------------------------------*/ -#include "usbd_msc_bot.h" -#include "usbd_msc_scsi.h" -#include "usbd_msc_mem.h" -#include "usbd_msc_data.h" -#include "usbd_conf.h" - - - -/** @addtogroup STM32_USB_OTG_DEVICE_LIBRARY - * @{ - */ - - -/** @defgroup MSC_SCSI - * @brief Mass storage SCSI layer module - * @{ - */ - -/** @defgroup MSC_SCSI_Private_TypesDefinitions - * @{ - */ -/** - * @} - */ - - -/** @defgroup MSC_SCSI_Private_Defines - * @{ - */ - -/** - * @} - */ - - -/** @defgroup MSC_SCSI_Private_Macros - * @{ - */ -/** - * @} - */ - - -/** @defgroup MSC_SCSI_Private_Variables - * @{ - */ - -SCSI_Sense_TypeDef SCSI_Sense [SENSE_LIST_DEEPTH]; -uint8_t SCSI_Sense_Head; -uint8_t SCSI_Sense_Tail; - -uint32_t SCSI_blk_size; -uint32_t SCSI_blk_nbr; - -uint32_t SCSI_blk_addr; -uint32_t SCSI_blk_len; - -USB_OTG_CORE_HANDLE *cdev; -/** - * @} - */ - - -/** @defgroup MSC_SCSI_Private_FunctionPrototypes - * @{ - */ -static int8_t SCSI_TestUnitReady(uint8_t lun, uint8_t *params); -static int8_t SCSI_Inquiry(uint8_t lun, uint8_t *params); -static int8_t SCSI_ReadFormatCapacity(uint8_t lun, uint8_t *params); -static int8_t SCSI_ReadCapacity10(uint8_t lun, uint8_t *params); -static int8_t SCSI_RequestSense (uint8_t lun, uint8_t *params); -static int8_t SCSI_StartStopUnit(uint8_t lun, uint8_t *params); -static int8_t SCSI_ModeSense6 (uint8_t lun, uint8_t *params); -static int8_t SCSI_ModeSense10 (uint8_t lun, uint8_t *params); -static int8_t SCSI_Write10(uint8_t lun , uint8_t *params); -static int8_t SCSI_Read10(uint8_t lun , uint8_t *params); -static int8_t SCSI_Verify10(uint8_t lun, uint8_t *params); -static int8_t SCSI_CheckAddressRange (uint8_t lun , - uint32_t blk_offset , - uint16_t blk_nbr); -static int8_t SCSI_ProcessRead (uint8_t lun); - -static int8_t SCSI_ProcessWrite (uint8_t lun); -/** - * @} - */ - - -/** @defgroup MSC_SCSI_Private_Functions - * @{ - */ - - -/** -* @brief SCSI_ProcessCmd -* Process SCSI commands -* @param pdev: device instance -* @param lun: Logical unit number -* @param params: Command parameters -* @retval status -*/ -int8_t SCSI_ProcessCmd(USB_OTG_CORE_HANDLE *pdev, - uint8_t lun, - uint8_t *params) -{ - cdev = pdev; - - switch (params[0]) - { - case SCSI_TEST_UNIT_READY: - return SCSI_TestUnitReady(lun, params); - - case SCSI_REQUEST_SENSE: - return SCSI_RequestSense (lun, params); - case SCSI_INQUIRY: - return SCSI_Inquiry(lun, params); - - case SCSI_START_STOP_UNIT: - return SCSI_StartStopUnit(lun, params); - - case SCSI_ALLOW_MEDIUM_REMOVAL: - return SCSI_StartStopUnit(lun, params); - - case SCSI_MODE_SENSE6: - return SCSI_ModeSense6 (lun, params); - - case SCSI_MODE_SENSE10: - return SCSI_ModeSense10 (lun, params); - - case SCSI_READ_FORMAT_CAPACITIES: - return SCSI_ReadFormatCapacity(lun, params); - - case SCSI_READ_CAPACITY10: - return SCSI_ReadCapacity10(lun, params); - - case SCSI_READ10: - return SCSI_Read10(lun, params); - - case SCSI_WRITE10: - return SCSI_Write10(lun, params); - - case SCSI_VERIFY10: - return SCSI_Verify10(lun, params); - - default: - SCSI_SenseCode(lun, - ILLEGAL_REQUEST, - INVALID_CDB); - return -1; - } -} - - -/** -* @brief SCSI_TestUnitReady -* Process SCSI Test Unit Ready Command -* @param lun: Logical unit number -* @param params: Command parameters -* @retval status -*/ -static int8_t SCSI_TestUnitReady(uint8_t lun, uint8_t *params) -{ - - /* case 9 : Hi > D0 */ - if (MSC_BOT_cbw.dDataLength != 0) - { - SCSI_SenseCode(MSC_BOT_cbw.bLUN, - ILLEGAL_REQUEST, - INVALID_CDB); - return -1; - } - - if(USBD_STORAGE_fops->IsReady(lun) !=0 ) - { - SCSI_SenseCode(lun, - NOT_READY, - MEDIUM_NOT_PRESENT); - return -1; - } - MSC_BOT_DataLen = 0; - return 0; -} - -/** -* @brief SCSI_Inquiry -* Process Inquiry command -* @param lun: Logical unit number -* @param params: Command parameters -* @retval status -*/ -static int8_t SCSI_Inquiry(uint8_t lun, uint8_t *params) -{ - uint8_t* pPage; - uint16_t len; - - if (params[1] & 0x01)/*Evpd is set*/ - { - pPage = (uint8_t *)MSC_Page00_Inquiry_Data; - len = LENGTH_INQUIRY_PAGE00; - } - else - { - - pPage = (uint8_t *)&USBD_STORAGE_fops->pInquiry[lun * USBD_STD_INQUIRY_LENGTH]; - len = pPage[4] + 5; - - if (params[4] <= len) - { - len = params[4]; - } - } - MSC_BOT_DataLen = len; - - while (len) - { - len--; - MSC_BOT_Data[len] = pPage[len]; - } - return 0; -} - -/** -* @brief SCSI_ReadCapacity10 -* Process Read Capacity 10 command -* @param lun: Logical unit number -* @param params: Command parameters -* @retval status -*/ -static int8_t SCSI_ReadCapacity10(uint8_t lun, uint8_t *params) -{ - - if(USBD_STORAGE_fops->GetCapacity(lun, &SCSI_blk_nbr, &SCSI_blk_size) != 0) - { - SCSI_SenseCode(lun, - NOT_READY, - MEDIUM_NOT_PRESENT); - return -1; - } - else - { - - MSC_BOT_Data[0] = (uint8_t)((SCSI_blk_nbr - 1) >> 24); // dpgeorge added paren - MSC_BOT_Data[1] = (uint8_t)((SCSI_blk_nbr - 1) >> 16); // dpgeorge added paren - MSC_BOT_Data[2] = (uint8_t)((SCSI_blk_nbr - 1) >> 8); // dpgeorge added paren - MSC_BOT_Data[3] = (uint8_t)(SCSI_blk_nbr - 1); - - MSC_BOT_Data[4] = (uint8_t)(SCSI_blk_size >> 24); - MSC_BOT_Data[5] = (uint8_t)(SCSI_blk_size >> 16); - MSC_BOT_Data[6] = (uint8_t)(SCSI_blk_size >> 8); - MSC_BOT_Data[7] = (uint8_t)(SCSI_blk_size); - - MSC_BOT_DataLen = 8; - return 0; - } -} -/** -* @brief SCSI_ReadFormatCapacity -* Process Read Format Capacity command -* @param lun: Logical unit number -* @param params: Command parameters -* @retval status -*/ -static int8_t SCSI_ReadFormatCapacity(uint8_t lun, uint8_t *params) -{ - - uint32_t blk_size; - uint32_t blk_nbr; - uint16_t i; - - for(i=0 ; i < 12 ; i++) - { - MSC_BOT_Data[i] = 0; - } - - if(USBD_STORAGE_fops->GetCapacity(lun, &blk_nbr, &blk_size) != 0) - { - SCSI_SenseCode(lun, - NOT_READY, - MEDIUM_NOT_PRESENT); - return -1; - } - else - { - MSC_BOT_Data[3] = 0x08; - MSC_BOT_Data[4] = (uint8_t)((blk_nbr - 1) >> 24); // dpgeorge added paren - MSC_BOT_Data[5] = (uint8_t)((blk_nbr - 1) >> 16); // dpgeorge added paren - MSC_BOT_Data[6] = (uint8_t)((blk_nbr - 1) >> 8); // dpgeorge added paren - MSC_BOT_Data[7] = (uint8_t)(blk_nbr - 1); - - MSC_BOT_Data[8] = 0x02; - MSC_BOT_Data[9] = (uint8_t)(blk_size >> 16); - MSC_BOT_Data[10] = (uint8_t)(blk_size >> 8); - MSC_BOT_Data[11] = (uint8_t)(blk_size); - - MSC_BOT_DataLen = 12; - return 0; - } -} -/** -* @brief SCSI_ModeSense6 -* Process Mode Sense6 command -* @param lun: Logical unit number -* @param params: Command parameters -* @retval status -*/ -static int8_t SCSI_ModeSense6 (uint8_t lun, uint8_t *params) -{ - - uint16_t len = 8 ; - MSC_BOT_DataLen = len; - - while (len) - { - len--; - MSC_BOT_Data[len] = MSC_Mode_Sense6_data[len]; - } - return 0; -} - -/** -* @brief SCSI_ModeSense10 -* Process Mode Sense10 command -* @param lun: Logical unit number -* @param params: Command parameters -* @retval status -*/ -static int8_t SCSI_ModeSense10 (uint8_t lun, uint8_t *params) -{ - uint16_t len = 8; - - MSC_BOT_DataLen = len; - - while (len) - { - len--; - MSC_BOT_Data[len] = MSC_Mode_Sense10_data[len]; - } - return 0; -} - -/** -* @brief SCSI_RequestSense -* Process Request Sense command -* @param lun: Logical unit number -* @param params: Command parameters -* @retval status -*/ - -static int8_t SCSI_RequestSense (uint8_t lun, uint8_t *params) -{ - uint8_t i; - - for(i=0 ; i < REQUEST_SENSE_DATA_LEN ; i++) - { - MSC_BOT_Data[i] = 0; - } - - MSC_BOT_Data[0] = 0x70; - MSC_BOT_Data[7] = REQUEST_SENSE_DATA_LEN - 6; - - if((SCSI_Sense_Head != SCSI_Sense_Tail)) { - - MSC_BOT_Data[2] = SCSI_Sense[SCSI_Sense_Head].Skey; - MSC_BOT_Data[12] = SCSI_Sense[SCSI_Sense_Head].w.b.ASCQ; - MSC_BOT_Data[13] = SCSI_Sense[SCSI_Sense_Head].w.b.ASC; - SCSI_Sense_Head++; - - if (SCSI_Sense_Head == SENSE_LIST_DEEPTH) - { - SCSI_Sense_Head = 0; - } - } - MSC_BOT_DataLen = REQUEST_SENSE_DATA_LEN; - - if (params[4] <= REQUEST_SENSE_DATA_LEN) - { - MSC_BOT_DataLen = params[4]; - } - return 0; -} - -/** -* @brief SCSI_SenseCode -* Load the last error code in the error list -* @param lun: Logical unit number -* @param sKey: Sense Key -* @param ASC: Additional Sense Key -* @retval none - -*/ -void SCSI_SenseCode(uint8_t lun, uint8_t sKey, uint8_t ASC) -{ - SCSI_Sense[SCSI_Sense_Tail].Skey = sKey; - SCSI_Sense[SCSI_Sense_Tail].w.ASC = ASC << 8; - SCSI_Sense_Tail++; - if (SCSI_Sense_Tail == SENSE_LIST_DEEPTH) - { - SCSI_Sense_Tail = 0; - } -} -/** -* @brief SCSI_StartStopUnit -* Process Start Stop Unit command -* @param lun: Logical unit number -* @param params: Command parameters -* @retval status -*/ -static int8_t SCSI_StartStopUnit(uint8_t lun, uint8_t *params) -{ - MSC_BOT_DataLen = 0; - return 0; -} - -/** -* @brief SCSI_Read10 -* Process Read10 command -* @param lun: Logical unit number -* @param params: Command parameters -* @retval status -*/ -static int8_t SCSI_Read10(uint8_t lun , uint8_t *params) -{ - if(MSC_BOT_State == BOT_IDLE) /* Idle */ - { - - /* case 10 : Ho <> Di */ - - if ((MSC_BOT_cbw.bmFlags & 0x80) != 0x80) - { - SCSI_SenseCode(MSC_BOT_cbw.bLUN, - ILLEGAL_REQUEST, - INVALID_CDB); - return -1; - } - - if(USBD_STORAGE_fops->IsReady(lun) !=0 ) - { - SCSI_SenseCode(lun, - NOT_READY, - MEDIUM_NOT_PRESENT); - return -1; - } - - SCSI_blk_addr = (params[2] << 24) | \ - (params[3] << 16) | \ - (params[4] << 8) | \ - params[5]; - - SCSI_blk_len = (params[7] << 8) | \ - params[8]; - - - - if( SCSI_CheckAddressRange(lun, SCSI_blk_addr, SCSI_blk_len) < 0) - { - return -1; /* error */ - } - - MSC_BOT_State = BOT_DATA_IN; - SCSI_blk_addr *= SCSI_blk_size; - SCSI_blk_len *= SCSI_blk_size; - - /* cases 4,5 : Hi <> Dn */ - if (MSC_BOT_cbw.dDataLength != SCSI_blk_len) - { - SCSI_SenseCode(MSC_BOT_cbw.bLUN, - ILLEGAL_REQUEST, - INVALID_CDB); - return -1; - } - } - MSC_BOT_DataLen = MSC_MEDIA_PACKET; - - return SCSI_ProcessRead(lun); -} - -/** -* @brief SCSI_Write10 -* Process Write10 command -* @param lun: Logical unit number -* @param params: Command parameters -* @retval status -*/ - -static int8_t SCSI_Write10 (uint8_t lun , uint8_t *params) -{ - if (MSC_BOT_State == BOT_IDLE) /* Idle */ - { - - /* case 8 : Hi <> Do */ - - if ((MSC_BOT_cbw.bmFlags & 0x80) == 0x80) - { - SCSI_SenseCode(MSC_BOT_cbw.bLUN, - ILLEGAL_REQUEST, - INVALID_CDB); - return -1; - } - - /* Check whether Media is ready */ - if(USBD_STORAGE_fops->IsReady(lun) !=0 ) - { - SCSI_SenseCode(lun, - NOT_READY, - MEDIUM_NOT_PRESENT); - return -1; - } - - /* Check If media is write-protected */ - if(USBD_STORAGE_fops->IsWriteProtected(lun) !=0 ) - { - SCSI_SenseCode(lun, - NOT_READY, - WRITE_PROTECTED); - return -1; - } - - - SCSI_blk_addr = (params[2] << 24) | \ - (params[3] << 16) | \ - (params[4] << 8) | \ - params[5]; - SCSI_blk_len = (params[7] << 8) | \ - params[8]; - - /* check if LBA address is in the right range */ - if(SCSI_CheckAddressRange(lun, SCSI_blk_addr, SCSI_blk_len) < 0) - { - return -1; /* error */ - } - - SCSI_blk_addr *= SCSI_blk_size; - SCSI_blk_len *= SCSI_blk_size; - - /* cases 3,11,13 : Hn,Ho <> D0 */ - if (MSC_BOT_cbw.dDataLength != SCSI_blk_len) - { - SCSI_SenseCode(MSC_BOT_cbw.bLUN, - ILLEGAL_REQUEST, - INVALID_CDB); - return -1; - } - - /* Prepare EP to receive first data packet */ - MSC_BOT_State = BOT_DATA_OUT; - DCD_EP_PrepareRx (cdev, - MSC_OUT_EP, - MSC_BOT_Data, - MIN (SCSI_blk_len, MSC_MEDIA_PACKET)); - } - else /* Write Process ongoing */ - { - return SCSI_ProcessWrite(lun); - } - return 0; -} - - -/** -* @brief SCSI_Verify10 -* Process Verify10 command -* @param lun: Logical unit number -* @param params: Command parameters -* @retval status -*/ - -static int8_t SCSI_Verify10(uint8_t lun , uint8_t *params){ - if ((params[1]& 0x02) == 0x02) - { - SCSI_SenseCode (lun, ILLEGAL_REQUEST, INVALID_FIELED_IN_COMMAND); - return -1; /* Error, Verify Mode Not supported*/ - } - - if(SCSI_CheckAddressRange(lun, SCSI_blk_addr, SCSI_blk_len) < 0) - { - return -1; /* error */ - } - MSC_BOT_DataLen = 0; - return 0; -} - -/** -* @brief SCSI_CheckAddressRange -* Check address range -* @param lun: Logical unit number -* @param blk_offset: first block address -* @param blk_nbr: number of block to be processed -* @retval status -*/ -static int8_t SCSI_CheckAddressRange (uint8_t lun , uint32_t blk_offset , uint16_t blk_nbr) -{ - - if ((blk_offset + blk_nbr) > SCSI_blk_nbr ) - { - SCSI_SenseCode(lun, ILLEGAL_REQUEST, ADDRESS_OUT_OF_RANGE); - return -1; - } - return 0; -} - -/** -* @brief SCSI_ProcessRead -* Handle Read Process -* @param lun: Logical unit number -* @retval status -*/ -static int8_t SCSI_ProcessRead (uint8_t lun) -{ - uint32_t len; - - len = MIN(SCSI_blk_len , MSC_MEDIA_PACKET); - - if( USBD_STORAGE_fops->Read(lun , - MSC_BOT_Data, - SCSI_blk_addr / SCSI_blk_size, - len / SCSI_blk_size) < 0) - { - - SCSI_SenseCode(lun, HARDWARE_ERROR, UNRECOVERED_READ_ERROR); - return -1; - } - - - DCD_EP_Tx (cdev, - MSC_IN_EP, - MSC_BOT_Data, - len); - - - SCSI_blk_addr += len; - SCSI_blk_len -= len; - - /* case 6 : Hi = Di */ - MSC_BOT_csw.dDataResidue -= len; - - if (SCSI_blk_len == 0) - { - MSC_BOT_State = BOT_LAST_DATA_IN; - } - return 0; -} - -/** -* @brief SCSI_ProcessWrite -* Handle Write Process -* @param lun: Logical unit number -* @retval status -*/ - -static int8_t SCSI_ProcessWrite (uint8_t lun) -{ - uint32_t len; - - len = MIN(SCSI_blk_len , MSC_MEDIA_PACKET); - - if(USBD_STORAGE_fops->Write(lun , - MSC_BOT_Data, - SCSI_blk_addr / SCSI_blk_size, - len / SCSI_blk_size) < 0) - { - SCSI_SenseCode(lun, HARDWARE_ERROR, WRITE_FAULT); - return -1; - } - - - SCSI_blk_addr += len; - SCSI_blk_len -= len; - - /* case 12 : Ho = Do */ - MSC_BOT_csw.dDataResidue -= len; - - if (SCSI_blk_len == 0) - { - MSC_BOT_SendCSW (cdev, CSW_CMD_PASSED); - } - else - { - /* Prapare EP to Receive next packet */ - DCD_EP_PrepareRx (cdev, - MSC_OUT_EP, - MSC_BOT_Data, - MIN (SCSI_blk_len, MSC_MEDIA_PACKET)); - } - - return 0; -} -/** - * @} - */ - - -/** - * @} - */ - - -/** - * @} - */ - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/stm/lib/usbd_msc_scsi.h b/stm/lib/usbd_msc_scsi.h deleted file mode 100644 index 1b8e35af1..000000000 --- a/stm/lib/usbd_msc_scsi.h +++ /dev/null @@ -1,195 +0,0 @@ -/** - ****************************************************************************** - * @file usbd_msc_scsi.h - * @author MCD Application Team - * @version V1.1.0 - * @date 19-March-2012 - * @brief header for the usbd_msc_scsi.c file - ****************************************************************************** - * @attention - * - *

© COPYRIGHT 2012 STMicroelectronics

- * - * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License"); - * You may not use this file except in compliance with the License. - * You may obtain a copy of the License at: - * - * http://www.st.com/software_license_agreement_liberty_v2 - * - * Unless required by applicable law or agreed to in writing, software - * distributed under the License is distributed on an "AS IS" BASIS, - * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - * See the License for the specific language governing permissions and - * limitations under the License. - * - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __USBD_MSC_SCSI_H -#define __USBD_MSC_SCSI_H - -/* Includes ------------------------------------------------------------------*/ -#include "usbd_def.h" - -/** @addtogroup STM32_USB_OTG_DEVICE_LIBRARY - * @{ - */ - -/** @defgroup USBD_SCSI - * @brief header file for the storage disk file - * @{ - */ - -/** @defgroup USBD_SCSI_Exported_Defines - * @{ - */ - -#define SENSE_LIST_DEEPTH 4 - -/* SCSI Commands */ -#define SCSI_FORMAT_UNIT 0x04 -#define SCSI_INQUIRY 0x12 -#define SCSI_MODE_SELECT6 0x15 -#define SCSI_MODE_SELECT10 0x55 -#define SCSI_MODE_SENSE6 0x1A -#define SCSI_MODE_SENSE10 0x5A -#define SCSI_ALLOW_MEDIUM_REMOVAL 0x1E -#define SCSI_READ6 0x08 -#define SCSI_READ10 0x28 -#define SCSI_READ12 0xA8 -#define SCSI_READ16 0x88 - -#define SCSI_READ_CAPACITY10 0x25 -#define SCSI_READ_CAPACITY16 0x9E - -#define SCSI_REQUEST_SENSE 0x03 -#define SCSI_START_STOP_UNIT 0x1B -#define SCSI_TEST_UNIT_READY 0x00 -#define SCSI_WRITE6 0x0A -#define SCSI_WRITE10 0x2A -#define SCSI_WRITE12 0xAA -#define SCSI_WRITE16 0x8A - -#define SCSI_VERIFY10 0x2F -#define SCSI_VERIFY12 0xAF -#define SCSI_VERIFY16 0x8F - -#define SCSI_SEND_DIAGNOSTIC 0x1D -#define SCSI_READ_FORMAT_CAPACITIES 0x23 - -#define NO_SENSE 0 -#define RECOVERED_ERROR 1 -#define NOT_READY 2 -#define MEDIUM_ERROR 3 -#define HARDWARE_ERROR 4 -#define ILLEGAL_REQUEST 5 -#define UNIT_ATTENTION 6 -#define DATA_PROTECT 7 -#define BLANK_CHECK 8 -#define VENDOR_SPECIFIC 9 -#define COPY_ABORTED 10 -#define ABORTED_COMMAND 11 -#define VOLUME_OVERFLOW 13 -#define MISCOMPARE 14 - - -#define INVALID_CDB 0x20 -#define INVALID_FIELED_IN_COMMAND 0x24 -#define PARAMETER_LIST_LENGTH_ERROR 0x1A -#define INVALID_FIELD_IN_PARAMETER_LIST 0x26 -#define ADDRESS_OUT_OF_RANGE 0x21 -#define MEDIUM_NOT_PRESENT 0x3A -#define MEDIUM_HAVE_CHANGED 0x28 -#define WRITE_PROTECTED 0x27 -#define UNRECOVERED_READ_ERROR 0x11 -#define WRITE_FAULT 0x03 - -#define READ_FORMAT_CAPACITY_DATA_LEN 0x0C -#define READ_CAPACITY10_DATA_LEN 0x08 -#define MODE_SENSE10_DATA_LEN 0x08 -#define MODE_SENSE6_DATA_LEN 0x04 -#define REQUEST_SENSE_DATA_LEN 0x12 -#define STANDARD_INQUIRY_DATA_LEN 0x24 -#define BLKVFY 0x04 - -extern uint8_t Page00_Inquiry_Data[]; -extern uint8_t Standard_Inquiry_Data[]; -extern uint8_t Standard_Inquiry_Data2[]; -extern uint8_t Mode_Sense6_data[]; -extern uint8_t Mode_Sense10_data[]; -extern uint8_t Scsi_Sense_Data[]; -extern uint8_t ReadCapacity10_Data[]; -extern uint8_t ReadFormatCapacity_Data []; -/** - * @} - */ - - -/** @defgroup USBD_SCSI_Exported_TypesDefinitions - * @{ - */ - -typedef struct _SENSE_ITEM { - char Skey; - union { - struct _ASCs { - char ASC; - char ASCQ; - }b; - unsigned int ASC; - char *pData; - } w; -} SCSI_Sense_TypeDef; -/** - * @} - */ - -/** @defgroup USBD_SCSI_Exported_Macros - * @{ - */ - -/** - * @} - */ - -/** @defgroup USBD_SCSI_Exported_Variables - * @{ - */ -extern SCSI_Sense_TypeDef SCSI_Sense [SENSE_LIST_DEEPTH]; -extern uint8_t SCSI_Sense_Head; -extern uint8_t SCSI_Sense_Tail; - -/** - * @} - */ -/** @defgroup USBD_SCSI_Exported_FunctionsPrototype - * @{ - */ -int8_t SCSI_ProcessCmd(USB_OTG_CORE_HANDLE *pdev, - uint8_t lun, - uint8_t *cmd); - -void SCSI_SenseCode(uint8_t lun, - uint8_t sKey, - uint8_t ASC); - -/** - * @} - */ - -#endif /* __USBD_MSC_SCSI_H */ -/** - * @} - */ - -/** - * @} - */ - -/** -* @} -*/ - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ - diff --git a/stm/lib/usbd_pyb_core.c b/stm/lib/usbd_pyb_core.c deleted file mode 100644 index ac51e3ad8..000000000 --- a/stm/lib/usbd_pyb_core.c +++ /dev/null @@ -1,931 +0,0 @@ -/** - ****************************************************************************** - * @file usbd_cdc_core.c - * @author MCD Application Team - * @version V1.1.0 - * @date 19-March-2012 - * @brief This file provides the high layer firmware functions to manage the - * following functionalities of the USB CDC Class: - * - Initialization and Configuration of high and low layer - * - Enumeration as CDC Device (and enumeration for each implemented memory interface) - * - OUT/IN data transfer - * - Command IN transfer (class requests management) - * - Error management - * - * @verbatim - * - * =================================================================== - * CDC Class Driver Description - * =================================================================== - * This driver manages the "Universal Serial Bus Class Definitions for Communications Devices - * Revision 1.2 November 16, 2007" and the sub-protocol specification of "Universal Serial Bus - * Communications Class Subclass Specification for PSTN Devices Revision 1.2 February 9, 2007" - * This driver implements the following aspects of the specification: - * - Device descriptor management - * - Configuration descriptor management - * - Enumeration as CDC device with 2 data endpoints (IN and OUT) and 1 command endpoint (IN) - * - Requests management (as described in section 6.2 in specification) - * - Abstract Control Model compliant - * - Union Functional collection (using 1 IN endpoint for control) - * - Data interface class - - * @note - * For the Abstract Control Model, this core allows only transmitting the requests to - * lower layer dispatcher (ie. usbd_cdc_vcp.c/.h) which should manage each request and - * perform relative actions. - * - * These aspects may be enriched or modified for a specific user application. - * - * This driver doesn't implement the following aspects of the specification - * (but it is possible to manage these features with some modifications on this driver): - * - Any class-specific aspect relative to communication classes should be managed by user application. - * - All communication classes other than PSTN are not managed - * - * @endverbatim - * - ****************************************************************************** - * @attention - * - *

© COPYRIGHT 2012 STMicroelectronics

- * - * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License"); - * You may not use this file except in compliance with the License. - * You may obtain a copy of the License at: - * - * http://www.st.com/software_license_agreement_liberty_v2 - * - * Unless required by applicable law or agreed to in writing, software - * distributed under the License is distributed on an "AS IS" BASIS, - * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - * See the License for the specific language governing permissions and - * limitations under the License. - * - ****************************************************************************** - */ - -/* Includes ------------------------------------------------------------------*/ -#include - -#include "usbd_cdc_core.h" -#include "usbd_desc.h" -#include "usbd_req.h" -#include "usbd_conf.h" -#include "usbd_msc_bot.h" -#include "usbd_msc_mem.h" - -#define USB_PYB_USE_MSC (1) - -#if USB_PYB_USE_MSC -//#define USB_PYB_CONFIG_DESC_SIZ (67) // for only CDC VCP interfaces -#define USB_PYB_CONFIG_DESC_SIZ (98) // for both CDC VCP and MSC interfaces -#else // USE_HID -#define USB_PYB_CONFIG_DESC_SIZ (100) // for both CDC VCP and HID interfaces -#endif - -#define MSC_EPIN_SIZE MSC_MAX_PACKET -#define MSC_EPOUT_SIZE MSC_MAX_PACKET - -#define HID_MOUSE_REPORT_DESC_SIZE (74) - -#define HID_DESCRIPTOR_TYPE 0x21 -#define HID_REPORT_DESC 0x22 - -// HID parameters -#define HID_IN_EP (0x83) -#define HID_IN_PACKET (4) /* maximum, and actual, packet size */ - -/********************************************* - PYB Device library callbacks - *********************************************/ -static uint8_t usbd_pyb_Init (void *pdev, uint8_t cfgidx); -static uint8_t usbd_pyb_DeInit (void *pdev, uint8_t cfgidx); -static uint8_t usbd_pyb_Setup (void *pdev, USB_SETUP_REQ *req); -static uint8_t usbd_pyb_EP0_RxReady (void *pdev); -static uint8_t usbd_pyb_DataIn (void *pdev, uint8_t epnum); -static uint8_t usbd_pyb_DataOut (void *pdev, uint8_t epnum); -static uint8_t usbd_pyb_SOF (void *pdev); - -/********************************************* - PYB specific management functions - *********************************************/ -static void Handle_USBAsynchXfer (void *pdev); -static uint8_t *usbd_pyb_GetCfgDesc (uint8_t speed, uint16_t *length); - -/** @defgroup usbd_cdc_Private_Variables - * @{ - */ -extern CDC_IF_Prop_TypeDef VCP_fops; -extern uint8_t USBD_DeviceDesc [USB_SIZ_DEVICE_DESC]; - -__ALIGN_BEGIN static uint8_t usbd_cdc_AltSet __ALIGN_END = 0; -__ALIGN_BEGIN static uint8_t USB_Rx_Buffer[CDC_DATA_MAX_PACKET_SIZE] __ALIGN_END; -__ALIGN_BEGIN uint8_t APP_Rx_Buffer[APP_RX_DATA_SIZE] __ALIGN_END; - -__ALIGN_BEGIN static uint8_t CmdBuff[CDC_CMD_PACKET_SZE] __ALIGN_END; - -#if USB_PYB_USE_MSC -__ALIGN_BEGIN static uint8_t USBD_MSC_MaxLun __ALIGN_END = 0; -__ALIGN_BEGIN static uint8_t USBD_MSC_AltSet __ALIGN_END = 0; -#else -__ALIGN_BEGIN static uint8_t USBD_HID_AltSet __ALIGN_END = 0; -__ALIGN_BEGIN static uint8_t USBD_HID_Protocol __ALIGN_END = 0; -__ALIGN_BEGIN static uint8_t USBD_HID_IdleState __ALIGN_END = 0; -#endif - -uint32_t APP_Rx_ptr_in = 0; -uint32_t APP_Rx_ptr_out = 0; -uint32_t APP_Rx_length = 0; - -uint8_t USB_Tx_State = 0; - -static uint32_t cdcCmd = 0xFF; -static uint32_t cdcLen = 0; - -/* PYB interface class callbacks structure */ -USBD_Class_cb_TypeDef USBD_PYB_cb = -{ - usbd_pyb_Init, - usbd_pyb_DeInit, - usbd_pyb_Setup, - NULL, // EP0_TxSent - usbd_pyb_EP0_RxReady, - usbd_pyb_DataIn, - usbd_pyb_DataOut, - usbd_pyb_SOF, - NULL, // IsoINIncomplete - NULL, // IsoOUTIncomplete - usbd_pyb_GetCfgDesc, - // for OTG_HS support need to add other cfg desc here -}; - -#ifdef USB_OTG_HS_INTERNAL_DMA_ENABLED - #if defined ( __ICCARM__ ) /*!< IAR Compiler */ - #pragma data_alignment=4 - #endif -#endif /* USB_OTG_HS_INTERNAL_DMA_ENABLED */ -/* USB PYB device Configuration Descriptor */ -__ALIGN_BEGIN static uint8_t usbd_pyb_CfgDesc[USB_PYB_CONFIG_DESC_SIZ] __ALIGN_END = -{ - //-------------------------------------------------------------------------- - // Configuration Descriptor - 0x09, // bLength: Configuration Descriptor size - USB_CONFIGURATION_DESCRIPTOR_TYPE, // bDescriptorType: Configuration - LOBYTE(USB_PYB_CONFIG_DESC_SIZ), // wTotalLength: no of returned bytes - HIBYTE(USB_PYB_CONFIG_DESC_SIZ), - 0x03, // bNumInterfaces: 3 interfaces - 0x01, // bConfigurationValue: Configuration value - 0x04, // iConfiguration: Index of string descriptor describing the configuration - 0x80, // bmAttributes: bus powered; 0xc0 for self powered - 0xfa, // bMaxPower: in units of 2mA - - //========================================================================== - // Interface Association for CDC VCP - 0x08, // bLength: 8 bytes - USB_INTERFACE_ASSOCIATION_TYPE, // bDescriptorType: IAD - 0x00, // bFirstInterface: first interface for this association - 0x02, // bInterfaceCount: nummber of interfaces for this association - 0x00, // bFunctionClass: ? - 0x00, // bFunctionSubClass: ? - 0x00, // bFunctionProtocol: ? - 0x04, // iFunction: index of string for this function - - //-------------------------------------------------------------------------- - // Interface Descriptor - 0x09, // bLength: Interface Descriptor size - USB_INTERFACE_DESCRIPTOR_TYPE, // bDescriptorType: Interface - 0x00, // bInterfaceNumber: Number of Interface - 0x00, // bAlternateSetting: Alternate setting - 0x01, // bNumEndpoints: One endpoints used - 0x02, // bInterfaceClass: Communication Interface Class - 0x02, // bInterfaceSubClass: Abstract Control Model - 0x01, // bInterfaceProtocol: Common AT commands - 0x00, // iInterface: - - // Header Functional Descriptor - 0x05, // bLength: Endpoint Descriptor size - 0x24, // bDescriptorType: CS_INTERFACE - 0x00, // bDescriptorSubtype: Header Func Desc - 0x10, // bcdCDC: spec release number - 0x01, // ? - - // Call Management Functional Descriptor - 0x05, // bFunctionLength - 0x24, // bDescriptorType: CS_INTERFACE - 0x01, // bDescriptorSubtype: Call Management Func Desc - 0x00, // bmCapabilities: D0+D1 - 0x01, // bDataInterface: 1 - - // ACM Functional Descriptor - 0x04, // bFunctionLength - 0x24, // bDescriptorType: CS_INTERFACE - 0x02, // bDescriptorSubtype: Abstract Control Management desc - 0x02, // bmCapabilities - - // Union Functional Descriptor - 0x05, // bFunctionLength - 0x24, // bDescriptorType: CS_INTERFACE - 0x06, // bDescriptorSubtype: Union func desc - 0x00, // bMasterInterface: Communication class interface - 0x01, // bSlaveInterface0: Data Class Interface - - // Endpoint 2 Descriptor - 0x07, // bLength: Endpoint Descriptor size - USB_ENDPOINT_DESCRIPTOR_TYPE, // bDescriptorType: Endpoint - CDC_CMD_EP, // bEndpointAddress - 0x03, // bmAttributes: Interrupt - LOBYTE(CDC_CMD_PACKET_SZE), // wMaxPacketSize: - HIBYTE(CDC_CMD_PACKET_SZE), - 0x80, // bInterval: polling interval in frames of 1ms - - //-------------------------------------------------------------------------- - // Data class interface descriptor - 0x09, // bLength: Endpoint Descriptor size - USB_INTERFACE_DESCRIPTOR_TYPE, // bDescriptorType: interface - 0x01, // bInterfaceNumber: Number of Interface - 0x00, // bAlternateSetting: Alternate setting - 0x02, // bNumEndpoints: Two endpoints used - 0x0A, // bInterfaceClass: CDC - 0x00, // bInterfaceSubClass: ? - 0x00, // bInterfaceProtocol: ? - 0x00, // iInterface: - - // Endpoint OUT Descriptor - 0x07, // bLength: Endpoint Descriptor size - USB_ENDPOINT_DESCRIPTOR_TYPE, // bDescriptorType: Endpoint - CDC_OUT_EP, // bEndpointAddress - 0x02, // bmAttributes: Bulk - LOBYTE(CDC_DATA_MAX_PACKET_SIZE), // wMaxPacketSize: - HIBYTE(CDC_DATA_MAX_PACKET_SIZE), - 0x00, // bInterval: ignore for Bulk transfer - - // Endpoint IN Descriptor - 0x07, // bLength: Endpoint Descriptor size - USB_ENDPOINT_DESCRIPTOR_TYPE, // bDescriptorType: Endpoint - CDC_IN_EP, // bEndpointAddress - 0x02, // bmAttributes: Bulk - LOBYTE(CDC_DATA_MAX_PACKET_SIZE), // wMaxPacketSize: - HIBYTE(CDC_DATA_MAX_PACKET_SIZE), - 0x00, // bInterval: ignore for Bulk transfer - -#if USB_PYB_USE_MSC - //========================================================================== - // MSC only has 1 interface so doesn't need an IAD - - //-------------------------------------------------------------------------- - // Interface Descriptor - 0x09, // bLength: Interface Descriptor size - USB_INTERFACE_DESCRIPTOR_TYPE, // bDescriptorType: interface descriptor - 0x02, // bInterfaceNumber: Number of Interface - 0x00, // bAlternateSetting: Alternate setting - 0x02, // bNumEndpoints - 0x08, // bInterfaceClass: MSC Class - 0x06, // bInterfaceSubClass : SCSI transparent - 0x50, // nInterfaceProtocol - 0x00, // iInterface: - - // Endpoint IN descriptor - 0x07, // bLength: Endpoint descriptor length - USB_ENDPOINT_DESCRIPTOR_TYPE, // bDescriptorType: Endpoint descriptor type - MSC_IN_EP, // bEndpointAddress: IN, address 3 - 0x02, // bmAttributes: Bulk endpoint type - LOBYTE(MSC_MAX_PACKET), // wMaxPacketSize - HIBYTE(MSC_MAX_PACKET), - 0x00, // bInterval: ignore for Bulk transfer - - // Endpoint OUT descriptor - 0x07, // bLength: Endpoint descriptor length - USB_ENDPOINT_DESCRIPTOR_TYPE, // bDescriptorType: Endpoint descriptor type - MSC_OUT_EP, // bEndpointAddress: OUT, address 3 - 0x02, // bmAttributes: Bulk endpoint type - LOBYTE(MSC_MAX_PACKET), // wMaxPacketSize - HIBYTE(MSC_MAX_PACKET), - 0x00, // bInterval: ignore for Bulk transfer - -#else - //========================================================================== - // HID only has 1 interface so doesn't need an IAD - - //-------------------------------------------------------------------------- - // Interface Descriptor - 0x09, // bLength: Interface Descriptor size - USB_INTERFACE_DESCRIPTOR_TYPE, // bDescriptorType: interface descriptor - 0x02, // bInterfaceNumber: Number of Interface - 0x00, // bAlternateSetting: Alternate setting - 0x01, // bNumEndpoints - 0x03, // bInterfaceClass: HID Class - 0x01, // bInterfaceSubClass: 0=no boot, 1=BOOT - 0x01, // nInterfaceProtocol: 0=none, 1=keyboard, 2=mouse - 0x00, // iInterface: - - // Descriptor of Joystick Mouse HID - 0x09, // bLength: HID Descriptor size - HID_DESCRIPTOR_TYPE, // bDescriptorType: HID - 0x11, // bcdHID: HID Class Spec release number, low byte - 0x01, // bcdHID: high byte - 0x00, // bCountryCode: Hardware target country (0=unsupported) - 0x01, // bNumDescriptors: Number of HID class descriptors to follow - HID_REPORT_DESC, // bDescriptorType: report - HID_MOUSE_REPORT_DESC_SIZE, // wItemLength: Total length of Report descriptor - 0x00, - - // Endpoint IN descriptor - 0x07, // bLength: Endpoint descriptor length - USB_ENDPOINT_DESCRIPTOR_TYPE, // bDescriptorType: Endpoint descriptor type - HID_IN_EP, // bEndpointAddress: IN, address of HID - 0x03, // bmAttributes: Interrupt endpoint type - LOBYTE(HID_IN_PACKET), // wMaxPacketSize - HIBYTE(HID_IN_PACKET), - 0x0a, // bInterval: polling interval, units of 1ms - -#endif -}; - -#if 0 -__ALIGN_BEGIN static uint8_t HID_MOUSE_ReportDesc[HID_MOUSE_REPORT_DESC_SIZE] __ALIGN_END = -{ - 0x05, 0x01, - 0x09, 0x02, - 0xA1, 0x01, - 0x09, 0x01, - - 0xA1, 0x00, - 0x05, 0x09, - 0x19, 0x01, - 0x29, 0x03, - - 0x15, 0x00, - 0x25, 0x01, - 0x95, 0x03, - 0x75, 0x01, - - 0x81, 0x02, - 0x95, 0x01, - 0x75, 0x05, - 0x81, 0x01, - - 0x05, 0x01, - 0x09, 0x30, - 0x09, 0x31, - 0x09, 0x38, - - 0x15, 0x81, - 0x25, 0x7F, - 0x75, 0x08, - 0x95, 0x03, - - 0x81, 0x06, - 0xC0, 0x09, - 0x3c, 0x05, - 0xff, 0x09, - - 0x01, 0x15, - 0x00, 0x25, - 0x01, 0x75, - 0x01, 0x95, - - 0x02, 0xb1, - 0x22, 0x75, - 0x06, 0x95, - 0x01, 0xb1, - - 0x01, 0xc0 -}; -#endif - -/** @defgroup usbd_pyb_Private_Functions - * @{ - */ - -/** - * @brief usbd_pyb_Init - * Initilaize the PYB interface - * @param pdev: device instance - * @param cfgidx: Configuration index - * @retval status - */ -static uint8_t usbd_pyb_Init(void *pdev, uint8_t cfgidx) { - // deinit first to reset - usbd_pyb_DeInit(pdev, cfgidx); - - //---------------------------------- - // CDC VCP component - - // Open EP IN - DCD_EP_Open(pdev, - CDC_IN_EP, - CDC_DATA_IN_PACKET_SIZE, - USB_OTG_EP_BULK); - - // Open EP OUT - DCD_EP_Open(pdev, - CDC_OUT_EP, - CDC_DATA_OUT_PACKET_SIZE, - USB_OTG_EP_BULK); - - // Open Command IN EP - DCD_EP_Open(pdev, - CDC_CMD_EP, - CDC_CMD_PACKET_SZE, - USB_OTG_EP_INT); - - /* - // can use this to dynamically set the device class - uint8_t *pbuf = USBD_DeviceDesc; - pbuf[4] = DEVICE_CLASS_CDC; - pbuf[5] = DEVICE_SUBCLASS_CDC; - */ - - // Initialize the Interface physical components - VCP_fops.pIf_Init(); - - // Prepare Out endpoint to receive next packet */ - DCD_EP_PrepareRx(pdev, - CDC_OUT_EP, - (uint8_t*)(USB_Rx_Buffer), - CDC_DATA_OUT_PACKET_SIZE); - -#if USB_PYB_USE_MSC - //---------------------------------- - // MSC component - - // Open EP IN - DCD_EP_Open(pdev, - MSC_IN_EP, - MSC_EPIN_SIZE, - USB_OTG_EP_BULK); - - // Open EP OUT - DCD_EP_Open(pdev, - MSC_OUT_EP, - MSC_EPOUT_SIZE, - USB_OTG_EP_BULK); - - // Init the BOT layer - MSC_BOT_Init(pdev); - -#else - //---------------------------------- - // HID component - - // Open EP IN - DCD_EP_Open(pdev, - HID_IN_EP, - HID_IN_PACKET, - USB_OTG_EP_INT); -#endif - - return USBD_OK; -} - -/** - * @brief usbd_pyb_Init - * DeInitialize the CDC layer - * @param pdev: device instance - * @param cfgidx: Configuration index - * @retval status - */ -static uint8_t usbd_pyb_DeInit(void *pdev, uint8_t cfgidx) { - //---------------------------------- - // CDC VCP component - // close CDC EPs - DCD_EP_Close(pdev, CDC_IN_EP); - DCD_EP_Close(pdev, CDC_OUT_EP); - DCD_EP_Close(pdev, CDC_CMD_EP); - - // Restore default state of the Interface physical components - VCP_fops.pIf_DeInit(); - -#if USB_PYB_USE_MSC - //---------------------------------- - // MSC component - - // Close MSC EPs - DCD_EP_Close(pdev, MSC_IN_EP); - DCD_EP_Close(pdev, MSC_OUT_EP); - - // Un Init the BOT layer - MSC_BOT_DeInit(pdev); - -#else - //---------------------------------- - // HID component - - // Close HID EP - DCD_EP_Close(pdev, HID_IN_EP); -#endif - - return USBD_OK; -} - -#define BOT_GET_MAX_LUN 0xFE -#define BOT_RESET 0xFF - -#define HID_REQ_SET_PROTOCOL (0x0B) -#define HID_REQ_GET_PROTOCOL (0x03) -#define HID_REQ_SET_IDLE (0x0A) -#define HID_REQ_GET_IDLE (0x02) -#define HID_REQ_SET_REPORT (0x09) // used? -#define HID_REQ_GET_REPORT (0x01) // used? - -/** - * @brief usbd_pyb_Setup - * Handle the CDC specific requests - * @param pdev: instance - * @param req: usb requests - * @retval status - */ -static uint8_t usbd_pyb_Setup(void *pdev, USB_SETUP_REQ *req) { - switch (req->bmRequest & (USB_REQ_TYPE_MASK | USB_REQ_RECIPIENT_MASK)) { - - // Standard Device Request --------------------------------------------- - case (USB_REQ_TYPE_STANDARD | USB_REQ_RECIPIENT_DEVICE): - /* - switch (req->bRequest) { - case USB_REQ_GET_DESCRIPTOR: - { - uint16_t len = USB_CDC_DESC_SIZ; // XXX WRONG! - uint8_t *pbuf = usbd_pyb_CfgDesc + 9; - if ((req->wValue >> 8) == CDC_DESCRIPTOR_TYPE) { - pbuf = usbd_pyb_CfgDesc + 9 + (9 * USBD_ITF_MAX_NUM); // TODO - len = MIN(USB_CDC_DESC_SIZ, req->wLength); // TODO - } - return USBD_CtlSendData(pdev, pbuf, len); - // TODO stuff here for HID, using HID_MOUSE_ReportDesc - } - } - */ - break; - - // Standard Interface Request ------------------------------------------ - case (USB_REQ_TYPE_STANDARD | USB_REQ_RECIPIENT_INTERFACE): - switch (req->bRequest) { - case USB_REQ_GET_INTERFACE: - // wIndex & 0xff is the interface - if ((req->wIndex & 0xff) <= 1) { - return USBD_CtlSendData(pdev, &usbd_cdc_AltSet, 1); - } else { -#if USB_PYB_USE_MSC - return USBD_CtlSendData(pdev, &USBD_MSC_AltSet, 1); -#else - return USBD_CtlSendData(pdev, &USBD_HID_AltSet, 1); -#endif - } - - case USB_REQ_SET_INTERFACE: - if ((uint8_t)(req->wValue) < USBD_ITF_MAX_NUM) { // TODO - if ((req->wIndex & 0xff) <= 1) { - usbd_cdc_AltSet = req->wValue; - } else { -#if USB_PYB_USE_MSC - USBD_MSC_AltSet = req->wValue; -#else - USBD_HID_AltSet = req->wValue; -#endif - } - return USBD_OK; - } - } - break; - - // Standard Endpoint Request ------------------------------------------- - case (USB_REQ_TYPE_STANDARD | USB_REQ_RECIPIENT_ENDPOINT): - // req->wIndex is the endpoint number, including direction -#if USB_PYB_USE_MSC - if (req->wIndex == MSC_IN_EP || req->wIndex == MSC_OUT_EP) { - // MSC component - switch (req->bRequest) { - case USB_REQ_CLEAR_FEATURE: - - // Flush the FIFO and Clear the stall status - DCD_EP_Flush(pdev, (uint8_t)req->wIndex); - - // Re-activate the EP - DCD_EP_Close(pdev, (uint8_t)req->wIndex); - - if ((((uint8_t)req->wIndex) & 0x80) == 0x80) { - DCD_EP_Open(pdev, ((uint8_t)req->wIndex), MSC_EPIN_SIZE, USB_OTG_EP_BULK); - } else { - DCD_EP_Open(pdev, ((uint8_t)req->wIndex), MSC_EPOUT_SIZE, USB_OTG_EP_BULK); - } - - // Handle BOT error - MSC_BOT_CplClrFeature(pdev, (uint8_t)req->wIndex); - return USBD_OK; - } - } -#endif - break; - - // CDC Class Requests ------------------------------ - case (USB_REQ_TYPE_CLASS | USB_REQ_RECIPIENT_INTERFACE): - // req->wIndex is the recipient interface number - if (req->wIndex == 0) { - // CDC component, communications interface (TODO do we need to handle if#1?) - - // Check if the request is a data setup packet - if (req->wLength) { - if (req->bmRequest & 0x80) { - // Device-to-Host request - - // Get the data to be sent to Host from interface layer - VCP_fops.pIf_Ctrl(req->bRequest, CmdBuff, req->wLength); - - // Send the data to the host - return USBD_CtlSendData(pdev, CmdBuff, req->wLength); - - } else { - // Host-to-Device requeset - - // Set the value of the current command to be processed */ - cdcCmd = req->bRequest; - cdcLen = req->wLength; - - // Prepare the reception of the buffer over EP0 - // Next step: the received data will be managed in usbd_cdc_EP0_TxSent() function. - return USBD_CtlPrepareRx(pdev, CmdBuff, req->wLength); - } - } else { - // Not a Data request - - // Transfer the command to the interface layer */ - return VCP_fops.pIf_Ctrl(req->bRequest, NULL, 0); - } - - } else if (req->wIndex == 2) { -#if USB_PYB_USE_MSC - // MSC component - switch (req->bRequest) { - case BOT_GET_MAX_LUN: - if ((req->wValue == 0) && (req->wLength == 1) && ((req->bmRequest & 0x80) == 0x80)) { - USBD_MSC_MaxLun = USBD_STORAGE_fops->GetMaxLun(); - if (USBD_MSC_MaxLun > 0) { - return USBD_CtlSendData(pdev, &USBD_MSC_MaxLun, 1); - } - } - break; - - case BOT_RESET: - if ((req->wValue == 0) && (req->wLength == 0) && ((req->bmRequest & 0x80) != 0x80)) { - MSC_BOT_Reset(pdev); - return USBD_OK; - } - break; - } -#else - // HID component - switch (req->bRequest) { - case HID_REQ_SET_PROTOCOL: - USBD_HID_Protocol = req->wValue; - return USBD_OK; - - case HID_REQ_GET_PROTOCOL: - return USBD_CtlSendData(pdev, &USBD_HID_Protocol, 1); - - case HID_REQ_SET_IDLE: - USBD_HID_IdleState = (req->wValue >> 8); - return USBD_OK; - - case HID_REQ_GET_IDLE: - return USBD_CtlSendData(pdev, &USBD_HID_IdleState, 1); - } -#endif - } - break; - } - - printf("SU %x %x %x %x\n", req->bmRequest, req->bRequest, req->wValue, req->wIndex); - - // invalid command - USBD_CtlError(pdev, req); - return USBD_FAIL; -} - -/** - * @brief usbd_pyb_EP0_RxReady - * Data received on control endpoint - * @param pdev: device device instance - * @retval status - */ -static uint8_t usbd_pyb_EP0_RxReady(void *pdev) { - if (cdcCmd != NO_CMD) { - // Process the data - VCP_fops.pIf_Ctrl(cdcCmd, CmdBuff, cdcLen); - - // Reset the command variable to default value - cdcCmd = NO_CMD; - } - - return USBD_OK; -} - -/** - * @brief usbd_pyb_DataIn - * Data sent on non-control IN endpoint - * @param pdev: device instance - * @param epnum: endpoint number - * @retval status - */ -static uint8_t usbd_pyb_DataIn(void *pdev, uint8_t epnum) { - uint16_t USB_Tx_ptr; - uint16_t USB_Tx_length; - - switch (epnum) { - case (CDC_IN_EP & 0x7f): // TODO is this correct? - case (CDC_CMD_EP & 0x7f): // TODO is this correct? - if (USB_Tx_State == 1) { - if (APP_Rx_length == 0) { - USB_Tx_State = 0; - } else { - if (APP_Rx_length > CDC_DATA_IN_PACKET_SIZE) { - USB_Tx_ptr = APP_Rx_ptr_out; - USB_Tx_length = CDC_DATA_IN_PACKET_SIZE; - - APP_Rx_ptr_out += CDC_DATA_IN_PACKET_SIZE; - APP_Rx_length -= CDC_DATA_IN_PACKET_SIZE; - } else { - USB_Tx_ptr = APP_Rx_ptr_out; - USB_Tx_length = APP_Rx_length; - - APP_Rx_ptr_out += APP_Rx_length; - APP_Rx_length = 0; - } - - // Prepare the available data buffer to be sent on IN endpoint - DCD_EP_Tx(pdev, - CDC_IN_EP, - (uint8_t*)&APP_Rx_Buffer[USB_Tx_ptr], - USB_Tx_length); - } - } - return USBD_OK; - -#if USB_PYB_USE_MSC - case (MSC_IN_EP & 0x7f): // TODO? - MSC_BOT_DataIn(pdev, epnum); - return USBD_OK; - -#else - case (HID_IN_EP & 0x7f): - /* Ensure that the FIFO is empty before a new transfer, this condition could - be caused by a new transfer before the end of the previous transfer */ - DCD_EP_Flush(pdev, HID_IN_EP); - return USBD_OK; -#endif - } - - printf("DI %x\n", epnum); - - return USBD_OK; -} - -/** - * @brief usbd_pyb_DataOut - * Data received on non-control Out endpoint - * @param pdev: device instance - * @param epnum: endpoint number - * @retval status - */ -static uint8_t usbd_pyb_DataOut(void *pdev, uint8_t epnum) { - uint16_t USB_Rx_Cnt; - - switch (epnum) { - case (CDC_OUT_EP & 0x7f): // TODO is this correct? - // Get the received data buffer and update the counter */ - USB_Rx_Cnt = ((USB_OTG_CORE_HANDLE*)pdev)->dev.out_ep[epnum].xfer_count; - - /* USB data will be immediately processed, this allow next USB traffic being - NAKed till the end of the application Xfer */ - VCP_fops.pIf_DataRx(USB_Rx_Buffer, USB_Rx_Cnt); - - // Prepare Out endpoint to receive next packet */ - DCD_EP_PrepareRx(pdev, - CDC_OUT_EP, - (uint8_t*)(USB_Rx_Buffer), - CDC_DATA_OUT_PACKET_SIZE); - return USBD_OK; - -#if USB_PYB_USE_MSC - case (MSC_OUT_EP & 0x7f): // TODO is this correct? - MSC_BOT_DataOut(pdev, epnum); - return USBD_OK; -#endif - } - - printf("DO %x\n", epnum); - - return USBD_OK; -} - -/** - * @brief usbd_pyb_SOF - * Start Of Frame event management - * @param pdev: instance - * @retval status - */ -static uint8_t usbd_pyb_SOF(void *pdev) { - static uint32_t FrameCount = 0; - - // TODO do we need to check that this is for CDC/VCP? can we even do that? - - if (FrameCount++ == CDC_IN_FRAME_INTERVAL) { - // Reset the frame counter */ - FrameCount = 0; - - // Check the data to be sent through IN pipe */ - Handle_USBAsynchXfer(pdev); - } - - return USBD_OK; -} - -/** - * @brief Handle_USBAsynchXfer - * Send data to USB - * @param pdev: instance - * @retval None - */ -static void Handle_USBAsynchXfer (void *pdev) -{ - uint16_t USB_Tx_ptr; - uint16_t USB_Tx_length; - - if(USB_Tx_State != 1) - { - if (APP_Rx_ptr_out == APP_RX_DATA_SIZE) - { - APP_Rx_ptr_out = 0; - } - - if(APP_Rx_ptr_out == APP_Rx_ptr_in) - { - USB_Tx_State = 0; - return; - } - - if(APP_Rx_ptr_out > APP_Rx_ptr_in) // rollback */ - { - APP_Rx_length = APP_RX_DATA_SIZE - APP_Rx_ptr_out; - - } - else - { - APP_Rx_length = APP_Rx_ptr_in - APP_Rx_ptr_out; - - } -#ifdef USB_OTG_HS_INTERNAL_DMA_ENABLED - APP_Rx_length &= ~0x03; -#endif // USB_OTG_HS_INTERNAL_DMA_ENABLED */ - - if (APP_Rx_length > CDC_DATA_IN_PACKET_SIZE) - { - USB_Tx_ptr = APP_Rx_ptr_out; - USB_Tx_length = CDC_DATA_IN_PACKET_SIZE; - - APP_Rx_ptr_out += CDC_DATA_IN_PACKET_SIZE; - APP_Rx_length -= CDC_DATA_IN_PACKET_SIZE; - } - else - { - USB_Tx_ptr = APP_Rx_ptr_out; - USB_Tx_length = APP_Rx_length; - - APP_Rx_ptr_out += APP_Rx_length; - APP_Rx_length = 0; - } - USB_Tx_State = 1; - - DCD_EP_Tx (pdev, - CDC_IN_EP, - (uint8_t*)&APP_Rx_Buffer[USB_Tx_ptr], - USB_Tx_length); - } - -} - -/** - * @brief usbd_pyb_GetCfgDesc - * Return configuration descriptor - * @param speed : current device speed - * @param length : pointer data length - * @retval pointer to descriptor buffer - */ -static uint8_t *usbd_pyb_GetCfgDesc(uint8_t speed, uint16_t *length) { - *length = sizeof(usbd_pyb_CfgDesc); - return usbd_pyb_CfgDesc; -} - -/** - * @brief USBD_HID_SendReport - * Send HID Report - * @param pdev: device instance - * @param buff: pointer to report (4 bytes: ?, x, y, ?) - * @retval status - */ -/* -uint8_t USBD_HID_SendReport(USB_OTG_CORE_HANDLE *pdev, uint8_t *report, uint16_t len) { - if (pdev->dev.device_status == USB_OTG_CONFIGURED) { - DCD_EP_Tx(pdev, HID_IN_EP, report, len); - } - return USBD_OK; -} -*/ diff --git a/stm/lib/usbd_pyb_core.h b/stm/lib/usbd_pyb_core.h deleted file mode 100644 index 761ca2253..000000000 --- a/stm/lib/usbd_pyb_core.h +++ /dev/null @@ -1,4 +0,0 @@ -extern USBD_Class_cb_TypeDef USBD_PYB_cb; -extern USBD_Class_cb_TypeDef USBD_PYB_HID_cb; - -uint8_t USBD_HID_SendReport(USB_OTG_CORE_HANDLE *pdev, uint8_t *report, uint16_t len); diff --git a/stm/lib/usbd_pyb_core2.c b/stm/lib/usbd_pyb_core2.c deleted file mode 100644 index c1abda3e7..000000000 --- a/stm/lib/usbd_pyb_core2.c +++ /dev/null @@ -1,323 +0,0 @@ -#include - -#include "usbd_ioreq.h" -#include "usbd_desc.h" -#include "usbd_req.h" -#include "usbd_pyb_core.h" - -#define USB_PYB_CONFIG_DESC_SIZ (34) - -#define HID_MOUSE_REPORT_DESC_SIZE (74) - -#define HID_DESCRIPTOR_TYPE (0x21) -#define HID_REPORT_DESC (0x22) - -#define HID_IN_EP (0x81) -#define HID_IN_PACKET (4) /* maximum, and actual, packet size */ - -/********************************************* - PYB Device library callbacks - *********************************************/ - -static uint8_t usbd_pyb_Init (void *pdev, uint8_t cfgidx); -static uint8_t usbd_pyb_DeInit (void *pdev, uint8_t cfgidx); -static uint8_t usbd_pyb_Setup (void *pdev, USB_SETUP_REQ *req); -static uint8_t usbd_pyb_DataIn (void *pdev, uint8_t epnum); - -/********************************************* - PYB specific management functions - *********************************************/ - -static uint8_t *usbd_pyb_GetCfgDesc(uint8_t speed, uint16_t *length); - -__ALIGN_BEGIN static uint8_t USBD_HID_AltSet __ALIGN_END = 0; -__ALIGN_BEGIN static uint8_t USBD_HID_Protocol __ALIGN_END = 0; -__ALIGN_BEGIN static uint8_t USBD_HID_IdleState __ALIGN_END = 0; - -/* PYB interface class callbacks structure */ -USBD_Class_cb_TypeDef USBD_PYB_HID_cb = -{ - usbd_pyb_Init, - usbd_pyb_DeInit, - usbd_pyb_Setup, - NULL, // EP0_TxSent - NULL, // usbd_pyb_EP0_RxReady, - usbd_pyb_DataIn, - NULL, // usbd_pyb_DataOut, - NULL, // usbd_pyb_SOF, - NULL, // IsoINIncomplete - NULL, // IsoOUTIncomplete - usbd_pyb_GetCfgDesc, - // for OTG_HS support need to add other cfg desc here -}; - -/* USB PYB device Configuration Descriptor */ -__ALIGN_BEGIN static uint8_t usbd_pyb_CfgDesc[USB_PYB_CONFIG_DESC_SIZ] __ALIGN_END = -{ - //-------------------------------------------------------------------------- - // Configuration Descriptor - 0x09, // bLength: Configuration Descriptor size - USB_CONFIGURATION_DESCRIPTOR_TYPE, // bDescriptorType: Configuration - LOBYTE(USB_PYB_CONFIG_DESC_SIZ), // wTotalLength: no of returned bytes - HIBYTE(USB_PYB_CONFIG_DESC_SIZ), - 0x01, // bNumInterfaces: 1 interfaces - 0x01, // bConfigurationValue: Configuration value - 0x04, // iConfiguration: Index of string descriptor describing the configuration - 0x80, // bmAttributes: bus powered; 0xc0 for self powered - 0xfa, // bMaxPower: in units of 2mA - - //-------------------------------------------------------------------------- - // Interface Descriptor - 0x09, // bLength: Interface Descriptor size - USB_INTERFACE_DESCRIPTOR_TYPE, // bDescriptorType: interface descriptor - 0x00, // bInterfaceNumber: Number of Interface - 0x00, // bAlternateSetting: Alternate setting - 0x01, // bNumEndpoints - 0x03, // bInterfaceClass: HID Class - 0x01, // bInterfaceSubClass: 0=no boot, 1=BOOT - 0x02, // nInterfaceProtocol: 0=none, 1=keyboard, 2=mouse - 0x00, // iInterface: - - // Descriptor of Joystick Mouse HID - 0x09, // bLength: HID Descriptor size - HID_DESCRIPTOR_TYPE, // bDescriptorType: HID - 0x11, // bcdHID: HID Class Spec release number, low byte - 0x01, // bcdHID: high byte - 0x00, // bCountryCode: Hardware target country (0=unsupported) - 0x01, // bNumDescriptors: Number of HID class descriptors to follow - HID_REPORT_DESC, // bDescriptorType: report - HID_MOUSE_REPORT_DESC_SIZE, // wItemLength: Total length of Report descriptor - 0x00, - - // Endpoint IN descriptor - 0x07, // bLength: Endpoint descriptor length - USB_ENDPOINT_DESCRIPTOR_TYPE, // bDescriptorType: Endpoint descriptor type - HID_IN_EP, // bEndpointAddress: IN, address of HID - 0x03, // bmAttributes: Interrupt endpoint type - LOBYTE(HID_IN_PACKET), // wMaxPacketSize - HIBYTE(HID_IN_PACKET), - 0x0a, // bInterval: polling interval, units of 1ms -}; - -__ALIGN_BEGIN static uint8_t HID_MOUSE_ReportDesc[HID_MOUSE_REPORT_DESC_SIZE] __ALIGN_END = -{ - 0x05, 0x01, - 0x09, 0x02, - 0xA1, 0x01, - 0x09, 0x01, - - 0xA1, 0x00, - 0x05, 0x09, - 0x19, 0x01, - 0x29, 0x03, - - 0x15, 0x00, - 0x25, 0x01, - 0x95, 0x03, - 0x75, 0x01, - - 0x81, 0x02, - 0x95, 0x01, - 0x75, 0x05, - 0x81, 0x01, - - 0x05, 0x01, - 0x09, 0x30, - 0x09, 0x31, - 0x09, 0x38, - - 0x15, 0x81, - 0x25, 0x7F, - 0x75, 0x08, - 0x95, 0x03, - - 0x81, 0x06, - 0xC0, 0x09, - 0x3c, 0x05, - 0xff, 0x09, - - 0x01, 0x15, - 0x00, 0x25, - 0x01, 0x75, - 0x01, 0x95, - - 0x02, 0xb1, - 0x22, 0x75, - 0x06, 0x95, - 0x01, 0xb1, - - 0x01, 0xc0 -}; - -/** - * @brief usbd_pyb_Init - * Initilaize the PYB interface - * @param pdev: device instance - * @param cfgidx: Configuration index - * @retval status - */ -static uint8_t usbd_pyb_Init(void *pdev, uint8_t cfgidx) { - // deinit first to reset - usbd_pyb_DeInit(pdev, cfgidx); - - // Open EP IN - DCD_EP_Open(pdev, - HID_IN_EP, - HID_IN_PACKET, - USB_OTG_EP_INT); - - return USBD_OK; -} - -/** - * @brief usbd_pyb_Init - * DeInitialize the CDC layer - * @param pdev: device instance - * @param cfgidx: Configuration index - * @retval status - */ -static uint8_t usbd_pyb_DeInit(void *pdev, uint8_t cfgidx) { - // Close HID EP - DCD_EP_Close(pdev, HID_IN_EP); - - return USBD_OK; -} - -#define HID_REQ_SET_PROTOCOL (0x0B) -#define HID_REQ_GET_PROTOCOL (0x03) -#define HID_REQ_SET_IDLE (0x0A) -#define HID_REQ_GET_IDLE (0x02) -#define HID_REQ_SET_REPORT (0x09) // used? -#define HID_REQ_GET_REPORT (0x01) // used? - -/** - * @brief usbd_pyb_Setup - * Handle the CDC specific requests - * @param pdev: instance - * @param req: usb requests - * @retval status - */ -static uint8_t usbd_pyb_Setup(void *pdev, USB_SETUP_REQ *req) { - switch (req->bmRequest & (USB_REQ_TYPE_MASK | USB_REQ_RECIPIENT_MASK)) { - - // Standard Device Request --------------------------------------------- - case (USB_REQ_TYPE_STANDARD | USB_REQ_RECIPIENT_DEVICE): - break; - - // Standard Interface Request ------------------------------------------ - case (USB_REQ_TYPE_STANDARD | USB_REQ_RECIPIENT_INTERFACE): - switch (req->bRequest) { - case USB_REQ_GET_DESCRIPTOR: // needed for HID; SU 0x81 0x06 0x2200 0x00 request - // wIndex & 0xff is the interface - if ((req->wIndex & 0xff) == 0) { - uint16_t len = 0; - uint8_t *pbuf = NULL; - if( req->wValue >> 8 == HID_REPORT_DESC) { - len = MIN(HID_MOUSE_REPORT_DESC_SIZE , req->wLength); - pbuf = HID_MOUSE_ReportDesc; - return USBD_CtlSendData (pdev, pbuf, len); - } else if( req->wValue >> 8 == HID_DESCRIPTOR_TYPE) { - pbuf = usbd_pyb_CfgDesc + 0x09 + 0x09; - len = MIN(0x09 , req->wLength); - return USBD_CtlSendData (pdev, pbuf, len); - } - } - - case USB_REQ_GET_INTERFACE: - // wIndex & 0xff is the interface - if ((req->wIndex & 0xff) == 0) { - return USBD_CtlSendData(pdev, &USBD_HID_AltSet, 1); - } - - case USB_REQ_SET_INTERFACE: - if ((uint8_t)(req->wValue) < USBD_ITF_MAX_NUM) { // TODO - if ((req->wIndex & 0xff) == 0) { - USBD_HID_AltSet = req->wValue; - } - return USBD_OK; - } - } - break; - - // Standard Endpoint Request ------------------------------------------- - case (USB_REQ_TYPE_STANDARD | USB_REQ_RECIPIENT_ENDPOINT): - // req->wIndex is the endpoint number, including direction - break; - - // CDC Class Requests ------------------------------ - case (USB_REQ_TYPE_CLASS | USB_REQ_RECIPIENT_INTERFACE): - // req->wIndex is the recipient interface number - if (req->wIndex == 0) { - // HID component - switch (req->bRequest) { - case HID_REQ_SET_PROTOCOL: - USBD_HID_Protocol = req->wValue; - return USBD_OK; - - case HID_REQ_GET_PROTOCOL: - return USBD_CtlSendData(pdev, &USBD_HID_Protocol, 1); - - case HID_REQ_SET_IDLE: - USBD_HID_IdleState = (req->wValue >> 8); - return USBD_OK; - - case HID_REQ_GET_IDLE: - return USBD_CtlSendData(pdev, &USBD_HID_IdleState, 1); - } - } - break; - } - - printf("SU %x %x %x %x\n", req->bmRequest, req->bRequest, req->wValue, req->wIndex); - - // invalid command - USBD_CtlError(pdev, req); - return USBD_FAIL; -} - -/** - * @brief usbd_pyb_DataIn - * Data sent on non-control IN endpoint - * @param pdev: device instance - * @param epnum: endpoint number - * @retval status - */ -static uint8_t usbd_pyb_DataIn(void *pdev, uint8_t epnum) { - switch (epnum) { - case (HID_IN_EP & 0x7f): - /* Ensure that the FIFO is empty before a new transfer, this condition could - be caused by a new transfer before the end of the previous transfer */ - DCD_EP_Flush(pdev, HID_IN_EP); - return USBD_OK; - } - - printf("DI %x\n", epnum); - - return USBD_OK; -} - -/** - * @brief usbd_pyb_GetCfgDesc - * Return configuration descriptor - * @param speed : current device speed - * @param length : pointer data length - * @retval pointer to descriptor buffer - */ -static uint8_t *usbd_pyb_GetCfgDesc(uint8_t speed, uint16_t *length) { - *length = sizeof(usbd_pyb_CfgDesc); - return usbd_pyb_CfgDesc; -} - -/** - * @brief USBD_HID_SendReport - * Send HID Report - * @param pdev: device instance - * @param buff: pointer to report (4 bytes: ?, x, y, ?) - * @retval status - */ -uint8_t USBD_HID_SendReport(USB_OTG_CORE_HANDLE *pdev, uint8_t *report, uint16_t len) { - if (pdev->dev.device_status == USB_OTG_CONFIGURED) { - DCD_EP_Tx(pdev, HID_IN_EP, report, len); - } - return USBD_OK; -} diff --git a/stm/lib/usbd_req.c b/stm/lib/usbd_req.c deleted file mode 100644 index 02217cdcc..000000000 --- a/stm/lib/usbd_req.c +++ /dev/null @@ -1,868 +0,0 @@ -/** - ****************************************************************************** - * @file usbd_req.c - * @author MCD Application Team - * @version V1.1.0 - * @date 19-March-2012 - * @brief This file provides the standard USB requests following chapter 9. - ****************************************************************************** - * @attention - * - *

© COPYRIGHT 2012 STMicroelectronics

- * - * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License"); - * You may not use this file except in compliance with the License. - * You may obtain a copy of the License at: - * - * http://www.st.com/software_license_agreement_liberty_v2 - * - * Unless required by applicable law or agreed to in writing, software - * distributed under the License is distributed on an "AS IS" BASIS, - * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - * See the License for the specific language governing permissions and - * limitations under the License. - * - ****************************************************************************** - */ - -/* Includes ------------------------------------------------------------------*/ -#include "usbd_req.h" -#include "usbd_ioreq.h" -#include "usbd_desc.h" - - -/** @addtogroup STM32_USB_OTG_DEVICE_LIBRARY - * @{ - */ - - -/** @defgroup USBD_REQ - * @brief USB standard requests module - * @{ - */ - -/** @defgroup USBD_REQ_Private_TypesDefinitions - * @{ - */ -/** - * @} - */ - - -/** @defgroup USBD_REQ_Private_Defines - * @{ - */ - -/** - * @} - */ - - -/** @defgroup USBD_REQ_Private_Macros - * @{ - */ -/** - * @} - */ - - -/** @defgroup USBD_REQ_Private_Variables - * @{ - */ -extern __IO USB_OTG_DCTL_TypeDef SET_TEST_MODE; - -#ifdef USB_OTG_HS_INTERNAL_DMA_ENABLED - #if defined ( __ICCARM__ ) /*!< IAR Compiler */ - #pragma data_alignment=4 - #endif -#endif /* USB_OTG_HS_INTERNAL_DMA_ENABLED */ -__ALIGN_BEGIN uint32_t USBD_ep_status __ALIGN_END = 0; - -#ifdef USB_OTG_HS_INTERNAL_DMA_ENABLED - #if defined ( __ICCARM__ ) /*!< IAR Compiler */ - #pragma data_alignment=4 - #endif -#endif /* USB_OTG_HS_INTERNAL_DMA_ENABLED */ -__ALIGN_BEGIN uint32_t USBD_default_cfg __ALIGN_END = 0; - -#ifdef USB_OTG_HS_INTERNAL_DMA_ENABLED - #if defined ( __ICCARM__ ) /*!< IAR Compiler */ - #pragma data_alignment=4 - #endif -#endif /* USB_OTG_HS_INTERNAL_DMA_ENABLED */ -__ALIGN_BEGIN uint32_t USBD_cfg_status __ALIGN_END = 0; - -#ifdef USB_OTG_HS_INTERNAL_DMA_ENABLED - #if defined ( __ICCARM__ ) /*!< IAR Compiler */ - #pragma data_alignment=4 - #endif -#endif /* USB_OTG_HS_INTERNAL_DMA_ENABLED */ -__ALIGN_BEGIN uint8_t USBD_StrDesc[USB_MAX_STR_DESC_SIZ] __ALIGN_END ; -/** - * @} - */ - - -/** @defgroup USBD_REQ_Private_FunctionPrototypes - * @{ - */ -static void USBD_GetDescriptor(USB_OTG_CORE_HANDLE *pdev, - USB_SETUP_REQ *req); - -static void USBD_SetAddress(USB_OTG_CORE_HANDLE *pdev, - USB_SETUP_REQ *req); - -static void USBD_SetConfig(USB_OTG_CORE_HANDLE *pdev, - USB_SETUP_REQ *req); - -static void USBD_GetConfig(USB_OTG_CORE_HANDLE *pdev, - USB_SETUP_REQ *req); - -static void USBD_GetStatus(USB_OTG_CORE_HANDLE *pdev, - USB_SETUP_REQ *req); - -static void USBD_SetFeature(USB_OTG_CORE_HANDLE *pdev, - USB_SETUP_REQ *req); - -static void USBD_ClrFeature(USB_OTG_CORE_HANDLE *pdev, - USB_SETUP_REQ *req); - -static uint8_t USBD_GetLen(const char *buf); -/** - * @} - */ - - -/** @defgroup USBD_REQ_Private_Functions - * @{ - */ - - -/** -* @brief USBD_StdDevReq -* Handle standard usb device requests -* @param pdev: device instance -* @param req: usb request -* @retval status -*/ -USBD_Status USBD_StdDevReq (USB_OTG_CORE_HANDLE *pdev, USB_SETUP_REQ *req) -{ - USBD_Status ret = USBD_OK; - - switch (req->bRequest) - { - case USB_REQ_GET_DESCRIPTOR: - - USBD_GetDescriptor (pdev, req) ; - break; - - case USB_REQ_SET_ADDRESS: - USBD_SetAddress(pdev, req); - break; - - case USB_REQ_SET_CONFIGURATION: - USBD_SetConfig (pdev , req); - break; - - case USB_REQ_GET_CONFIGURATION: - USBD_GetConfig (pdev , req); - break; - - case USB_REQ_GET_STATUS: - USBD_GetStatus (pdev , req); - break; - - - case USB_REQ_SET_FEATURE: - USBD_SetFeature (pdev , req); - break; - - case USB_REQ_CLEAR_FEATURE: - USBD_ClrFeature (pdev , req); - break; - - default: - USBD_CtlError(pdev , req); - break; - } - - return ret; -} - -/** -* @brief USBD_StdItfReq -* Handle standard usb interface requests -* @param pdev: USB OTG device instance -* @param req: usb request -* @retval status -*/ -USBD_Status USBD_StdItfReq (USB_OTG_CORE_HANDLE *pdev, USB_SETUP_REQ *req) -{ - USBD_Status ret = USBD_OK; - - switch (pdev->dev.device_status) - { - case USB_OTG_CONFIGURED: - - if (LOBYTE(req->wIndex) <= USBD_ITF_MAX_NUM) - { - pdev->dev.class_cb->Setup (pdev, req); - - if((req->wLength == 0)&& (ret == USBD_OK)) - { - USBD_CtlSendStatus(pdev); - } - } - else - { - USBD_CtlError(pdev , req); - } - break; - - default: - USBD_CtlError(pdev , req); - break; - } - return ret; -} - -/** -* @brief USBD_StdEPReq -* Handle standard usb endpoint requests -* @param pdev: USB OTG device instance -* @param req: usb request -* @retval status -*/ -USBD_Status USBD_StdEPReq (USB_OTG_CORE_HANDLE *pdev, USB_SETUP_REQ *req) -{ - - uint8_t ep_addr; - USBD_Status ret = USBD_OK; - - ep_addr = LOBYTE(req->wIndex); - - switch (req->bRequest) - { - - case USB_REQ_SET_FEATURE : - - switch (pdev->dev.device_status) - { - case USB_OTG_ADDRESSED: - if ((ep_addr != 0x00) && (ep_addr != 0x80)) - { - DCD_EP_Stall(pdev , ep_addr); - } - break; - - case USB_OTG_CONFIGURED: - if (req->wValue == USB_FEATURE_EP_HALT) - { - if ((ep_addr != 0x00) && (ep_addr != 0x80)) - { - DCD_EP_Stall(pdev , ep_addr); - - } - } - pdev->dev.class_cb->Setup (pdev, req); - USBD_CtlSendStatus(pdev); - - break; - - default: - USBD_CtlError(pdev , req); - break; - } - break; - - case USB_REQ_CLEAR_FEATURE : - - switch (pdev->dev.device_status) - { - case USB_OTG_ADDRESSED: - if ((ep_addr != 0x00) && (ep_addr != 0x80)) - { - DCD_EP_Stall(pdev , ep_addr); - } - break; - - case USB_OTG_CONFIGURED: - if (req->wValue == USB_FEATURE_EP_HALT) - { - if ((ep_addr != 0x00) && (ep_addr != 0x80)) - { - DCD_EP_ClrStall(pdev , ep_addr); - pdev->dev.class_cb->Setup (pdev, req); - } - USBD_CtlSendStatus(pdev); - } - break; - - default: - USBD_CtlError(pdev , req); - break; - } - break; - - case USB_REQ_GET_STATUS: - switch (pdev->dev.device_status) - { - case USB_OTG_ADDRESSED: - if ((ep_addr != 0x00) && (ep_addr != 0x80)) - { - DCD_EP_Stall(pdev , ep_addr); - } - break; - - case USB_OTG_CONFIGURED: - - - if ((ep_addr & 0x80)== 0x80) - { - if(pdev->dev.in_ep[ep_addr & 0x7F].is_stall) - { - USBD_ep_status = 0x0001; - } - else - { - USBD_ep_status = 0x0000; - } - } - else if ((ep_addr & 0x80)== 0x00) - { - if(pdev->dev.out_ep[ep_addr].is_stall) - { - USBD_ep_status = 0x0001; - } - - else - { - USBD_ep_status = 0x0000; - } - } - USBD_CtlSendData (pdev, - (uint8_t *)&USBD_ep_status, - 2); - break; - - default: - USBD_CtlError(pdev , req); - break; - } - break; - - default: - break; - } - return ret; -} -/** -* @brief USBD_GetDescriptor -* Handle Get Descriptor requests -* @param pdev: device instance -* @param req: usb request -* @retval status -*/ -static void USBD_GetDescriptor(USB_OTG_CORE_HANDLE *pdev, - USB_SETUP_REQ *req) -{ - uint16_t len; - uint8_t *pbuf; - - - switch (req->wValue >> 8) - { - case USB_DESC_TYPE_DEVICE: - pbuf = pdev->dev.usr_device->GetDeviceDescriptor(pdev->cfg.speed, &len); - if ((req->wLength == 64) ||( pdev->dev.device_status == USB_OTG_DEFAULT)) - { - len = 8; - } - break; - - case USB_DESC_TYPE_CONFIGURATION: - pbuf = (uint8_t *)pdev->dev.class_cb->GetConfigDescriptor(pdev->cfg.speed, &len); -#ifdef USB_OTG_HS_CORE - if((pdev->cfg.speed == USB_OTG_SPEED_FULL )&& - (pdev->cfg.phy_itface == USB_OTG_ULPI_PHY)) - { - pbuf = (uint8_t *)pdev->dev.class_cb->GetOtherConfigDescriptor(pdev->cfg.speed, &len); - } -#endif - pbuf[1] = USB_DESC_TYPE_CONFIGURATION; - pdev->dev.pConfig_descriptor = pbuf; - break; - - case USB_DESC_TYPE_STRING: - switch ((uint8_t)(req->wValue)) - { - case USBD_IDX_LANGID_STR: - pbuf = pdev->dev.usr_device->GetLangIDStrDescriptor(pdev->cfg.speed, &len); - break; - - case USBD_IDX_MFC_STR: - pbuf = pdev->dev.usr_device->GetManufacturerStrDescriptor(pdev->cfg.speed, &len); - break; - - case USBD_IDX_PRODUCT_STR: - pbuf = pdev->dev.usr_device->GetProductStrDescriptor(pdev->cfg.speed, &len); - break; - - case USBD_IDX_SERIAL_STR: - pbuf = pdev->dev.usr_device->GetSerialStrDescriptor(pdev->cfg.speed, &len); - break; - - case USBD_IDX_CONFIG_STR: - pbuf = pdev->dev.usr_device->GetConfigurationStrDescriptor(pdev->cfg.speed, &len); - break; - - case USBD_IDX_INTERFACE_STR: - pbuf = pdev->dev.usr_device->GetInterfaceStrDescriptor(pdev->cfg.speed, &len); - break; - - default: -#ifdef USB_SUPPORT_USER_STRING_DESC - pbuf = pdev->dev.class_cb->GetUsrStrDescriptor(pdev->cfg.speed, (req->wValue) , &len); - break; -#else - USBD_CtlError(pdev , req); - return; -#endif /* USBD_CtlError(pdev , req); */ - } - break; - case USB_DESC_TYPE_DEVICE_QUALIFIER: -#ifdef USB_OTG_HS_CORE - if(pdev->cfg.speed == USB_OTG_SPEED_HIGH ) - { - - pbuf = (uint8_t *)pdev->dev.class_cb->GetConfigDescriptor(pdev->cfg.speed, &len); - - USBD_DeviceQualifierDesc[4]= pbuf[14]; - USBD_DeviceQualifierDesc[5]= pbuf[15]; - USBD_DeviceQualifierDesc[6]= pbuf[16]; - - pbuf = USBD_DeviceQualifierDesc; - len = USB_LEN_DEV_QUALIFIER_DESC; - break; - } - else - { - USBD_CtlError(pdev , req); - return; - } -#else - USBD_CtlError(pdev , req); - return; -#endif - - case USB_DESC_TYPE_OTHER_SPEED_CONFIGURATION: -#ifdef USB_OTG_HS_CORE - - if(pdev->cfg.speed == USB_OTG_SPEED_HIGH ) - { - pbuf = (uint8_t *)pdev->dev.class_cb->GetOtherConfigDescriptor(pdev->cfg.speed, &len); - pbuf[1] = USB_DESC_TYPE_OTHER_SPEED_CONFIGURATION; - break; - } - else - { - USBD_CtlError(pdev , req); - return; - } -#else - USBD_CtlError(pdev , req); - return; -#endif - - - default: - USBD_CtlError(pdev , req); - return; - } - - if((len != 0)&& (req->wLength != 0)) - { - - len = MIN(len , req->wLength); - - USBD_CtlSendData (pdev, - pbuf, - len); - } - -} - -/** -* @brief USBD_SetAddress -* Set device address -* @param pdev: device instance -* @param req: usb request -* @retval status -*/ -static void USBD_SetAddress(USB_OTG_CORE_HANDLE *pdev, - USB_SETUP_REQ *req) -{ - uint8_t dev_addr; - - if ((req->wIndex == 0) && (req->wLength == 0)) - { - dev_addr = (uint8_t)(req->wValue) & 0x7F; - - if (pdev->dev.device_status == USB_OTG_CONFIGURED) - { - USBD_CtlError(pdev , req); - } - else - { - pdev->dev.device_address = dev_addr; - DCD_EP_SetAddress(pdev, dev_addr); - USBD_CtlSendStatus(pdev); - - if (dev_addr != 0) - { - pdev->dev.device_status = USB_OTG_ADDRESSED; - } - else - { - pdev->dev.device_status = USB_OTG_DEFAULT; - } - } - } - else - { - USBD_CtlError(pdev , req); - } -} - -/** -* @brief USBD_SetConfig -* Handle Set device configuration request -* @param pdev: device instance -* @param req: usb request -* @retval status -*/ -static void USBD_SetConfig(USB_OTG_CORE_HANDLE *pdev, - USB_SETUP_REQ *req) -{ - - static uint8_t cfgidx; - - cfgidx = (uint8_t)(req->wValue); - - if (cfgidx > USBD_CFG_MAX_NUM ) - { - USBD_CtlError(pdev , req); - } - else - { - switch (pdev->dev.device_status) - { - case USB_OTG_ADDRESSED: - if (cfgidx) - { - pdev->dev.device_config = cfgidx; - pdev->dev.device_status = USB_OTG_CONFIGURED; - USBD_SetCfg(pdev , cfgidx); - USBD_CtlSendStatus(pdev); - } - else - { - USBD_CtlSendStatus(pdev); - } - break; - - case USB_OTG_CONFIGURED: - if (cfgidx == 0) - { - pdev->dev.device_status = USB_OTG_ADDRESSED; - pdev->dev.device_config = cfgidx; - USBD_ClrCfg(pdev , cfgidx); - USBD_CtlSendStatus(pdev); - - } - else if (cfgidx != pdev->dev.device_config) - { - /* Clear old configuration */ - USBD_ClrCfg(pdev , pdev->dev.device_config); - - /* set new configuration */ - pdev->dev.device_config = cfgidx; - USBD_SetCfg(pdev , cfgidx); - USBD_CtlSendStatus(pdev); - } - else - { - USBD_CtlSendStatus(pdev); - } - break; - - default: - USBD_CtlError(pdev , req); - break; - } - } -} - -/** -* @brief USBD_GetConfig -* Handle Get device configuration request -* @param pdev: device instance -* @param req: usb request -* @retval status -*/ -static void USBD_GetConfig(USB_OTG_CORE_HANDLE *pdev, - USB_SETUP_REQ *req) -{ - - if (req->wLength != 1) - { - USBD_CtlError(pdev , req); - } - else - { - switch (pdev->dev.device_status ) - { - case USB_OTG_ADDRESSED: - - USBD_CtlSendData (pdev, - (uint8_t *)&USBD_default_cfg, - 1); - break; - - case USB_OTG_CONFIGURED: - - USBD_CtlSendData (pdev, - &pdev->dev.device_config, - 1); - break; - - default: - USBD_CtlError(pdev , req); - break; - } - } -} - -/** -* @brief USBD_GetStatus -* Handle Get Status request -* @param pdev: device instance -* @param req: usb request -* @retval status -*/ -static void USBD_GetStatus(USB_OTG_CORE_HANDLE *pdev, - USB_SETUP_REQ *req) -{ - - - switch (pdev->dev.device_status) - { - case USB_OTG_ADDRESSED: - case USB_OTG_CONFIGURED: - -#ifdef USBD_SELF_POWERED - USBD_cfg_status = USB_CONFIG_SELF_POWERED; -#else - USBD_cfg_status = 0x00; -#endif - - if (pdev->dev.DevRemoteWakeup) - { - USBD_cfg_status |= USB_CONFIG_REMOTE_WAKEUP; - } - - USBD_CtlSendData (pdev, - (uint8_t *)&USBD_cfg_status, - 2); - break; - - default : - USBD_CtlError(pdev , req); - break; - } -} - - -/** -* @brief USBD_SetFeature -* Handle Set device feature request -* @param pdev: device instance -* @param req: usb request -* @retval status -*/ -static void USBD_SetFeature(USB_OTG_CORE_HANDLE *pdev, - USB_SETUP_REQ *req) -{ - - USB_OTG_DCTL_TypeDef dctl; - uint8_t test_mode = 0; - - if (req->wValue == USB_FEATURE_REMOTE_WAKEUP) - { - pdev->dev.DevRemoteWakeup = 1; - pdev->dev.class_cb->Setup (pdev, req); - USBD_CtlSendStatus(pdev); - } - - else if ((req->wValue == USB_FEATURE_TEST_MODE) && - ((req->wIndex & 0xFF) == 0)) - { - dctl.d32 = USB_OTG_READ_REG32(&pdev->regs.DREGS->DCTL); - - test_mode = req->wIndex >> 8; - switch (test_mode) - { - case 1: // TEST_J - dctl.b.tstctl = 1; - break; - - case 2: // TEST_K - dctl.b.tstctl = 2; - break; - - case 3: // TEST_SE0_NAK - dctl.b.tstctl = 3; - break; - - case 4: // TEST_PACKET - dctl.b.tstctl = 4; - break; - - case 5: // TEST_FORCE_ENABLE - dctl.b.tstctl = 5; - break; - } - SET_TEST_MODE = dctl; - pdev->dev.test_mode = 1; - USBD_CtlSendStatus(pdev); - } - -} - - -/** -* @brief USBD_ClrFeature -* Handle clear device feature request -* @param pdev: device instance -* @param req: usb request -* @retval status -*/ -static void USBD_ClrFeature(USB_OTG_CORE_HANDLE *pdev, - USB_SETUP_REQ *req) -{ - switch (pdev->dev.device_status) - { - case USB_OTG_ADDRESSED: - case USB_OTG_CONFIGURED: - if (req->wValue == USB_FEATURE_REMOTE_WAKEUP) - { - pdev->dev.DevRemoteWakeup = 0; - pdev->dev.class_cb->Setup (pdev, req); - USBD_CtlSendStatus(pdev); - } - break; - - default : - USBD_CtlError(pdev , req); - break; - } -} - -/** -* @brief USBD_ParseSetupRequest -* Copy buffer into setup structure -* @param pdev: device instance -* @param req: usb request -* @retval None -*/ - -void USBD_ParseSetupRequest( USB_OTG_CORE_HANDLE *pdev, - USB_SETUP_REQ *req) -{ - req->bmRequest = *(uint8_t *) (pdev->dev.setup_packet); - req->bRequest = *(uint8_t *) (pdev->dev.setup_packet + 1); - req->wValue = SWAPBYTE (pdev->dev.setup_packet + 2); - req->wIndex = SWAPBYTE (pdev->dev.setup_packet + 4); - req->wLength = SWAPBYTE (pdev->dev.setup_packet + 6); - - pdev->dev.in_ep[0].ctl_data_len = req->wLength ; - pdev->dev.device_state = USB_OTG_EP0_SETUP; -} - -/** -* @brief USBD_CtlError -* Handle USB low level Error -* @param pdev: device instance -* @param req: usb request -* @retval None -*/ - -void USBD_CtlError( USB_OTG_CORE_HANDLE *pdev, - USB_SETUP_REQ *req) -{ - - DCD_EP_Stall(pdev , 0x80); - DCD_EP_Stall(pdev , 0); - USB_OTG_EP0_OutStart(pdev); -} - - -/** - * @brief USBD_GetString - * Convert Ascii string into unicode one - * @param desc : descriptor buffer - * @param unicode : Formatted string buffer (unicode) - * @param len : descriptor length - * @retval None - */ -void USBD_GetString(const char *desc, uint8_t *unicode, uint16_t *len) -{ - uint8_t idx = 0; - - if (desc != NULL) - { - *len = USBD_GetLen(desc) * 2 + 2; - unicode[idx++] = *len; - unicode[idx++] = USB_DESC_TYPE_STRING; - - while (*desc != NULL) - { - unicode[idx++] = *desc++; - unicode[idx++] = 0x00; - } - } -} - -/** - * @brief USBD_GetLen - * return the string length - * @param buf : pointer to the ascii string buffer - * @retval string length - */ -static uint8_t USBD_GetLen(const char *buf) -{ - uint8_t len = 0; - - while (*buf != NULL) - { - len++; - buf++; - } - - return len; -} -/** - * @} - */ - - -/** - * @} - */ - - -/** - * @} - */ - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/stm/lib/usbd_req.h b/stm/lib/usbd_req.h deleted file mode 100644 index 4853186c0..000000000 --- a/stm/lib/usbd_req.h +++ /dev/null @@ -1,108 +0,0 @@ -/** - ****************************************************************************** - * @file usbd_req.h - * @author MCD Application Team - * @version V1.1.0 - * @date 19-March-2012 - * @brief header file for the usbd_req.c file - ****************************************************************************** - * @attention - * - *

© COPYRIGHT 2012 STMicroelectronics

- * - * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License"); - * You may not use this file except in compliance with the License. - * You may obtain a copy of the License at: - * - * http://www.st.com/software_license_agreement_liberty_v2 - * - * Unless required by applicable law or agreed to in writing, software - * distributed under the License is distributed on an "AS IS" BASIS, - * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - * See the License for the specific language governing permissions and - * limitations under the License. - * - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ - -#ifndef __USB_REQUEST_H_ -#define __USB_REQUEST_H_ - -/* Includes ------------------------------------------------------------------*/ -#include "usbd_def.h" -#include "usbd_core.h" -#include "usbd_conf.h" - - -/** @addtogroup STM32_USB_OTG_DEVICE_LIBRARY - * @{ - */ - -/** @defgroup USBD_REQ - * @brief header file for the usbd_ioreq.c file - * @{ - */ - -/** @defgroup USBD_REQ_Exported_Defines - * @{ - */ -/** - * @} - */ - - -/** @defgroup USBD_REQ_Exported_Types - * @{ - */ -/** - * @} - */ - - - -/** @defgroup USBD_REQ_Exported_Macros - * @{ - */ -/** - * @} - */ - -/** @defgroup USBD_REQ_Exported_Variables - * @{ - */ -/** - * @} - */ - -/** @defgroup USBD_REQ_Exported_FunctionsPrototype - * @{ - */ - -USBD_Status USBD_StdDevReq (USB_OTG_CORE_HANDLE *pdev, USB_SETUP_REQ *req); -USBD_Status USBD_StdItfReq (USB_OTG_CORE_HANDLE *pdev, USB_SETUP_REQ *req); -USBD_Status USBD_StdEPReq (USB_OTG_CORE_HANDLE *pdev, USB_SETUP_REQ *req); -void USBD_ParseSetupRequest( USB_OTG_CORE_HANDLE *pdev, - USB_SETUP_REQ *req); - -void USBD_CtlError( USB_OTG_CORE_HANDLE *pdev, - USB_SETUP_REQ *req); - -void USBD_GetString(const char *desc, uint8_t *unicode, uint16_t *len); -/** - * @} - */ - -#endif /* __USB_REQUEST_H_ */ - -/** - * @} - */ - -/** -* @} -*/ - - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/stm/lib/usbd_storage_msd.c b/stm/lib/usbd_storage_msd.c deleted file mode 100644 index c22abbd11..000000000 --- a/stm/lib/usbd_storage_msd.c +++ /dev/null @@ -1,341 +0,0 @@ -/** - ****************************************************************************** - * @file usbd_storage_msd.c - * @author MCD application Team - * @version V1.1.0 - * @date 19-March-2012 - * @brief This file provides the disk operations functions. - ****************************************************************************** - * @attention - * - *

© COPYRIGHT 2012 STMicroelectronics

- * - * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License"); - * You may not use this file except in compliance with the License. - * You may obtain a copy of the License at: - * - * http://www.st.com/software_license_agreement_liberty_v2 - * - * Unless required by applicable law or agreed to in writing, software - * distributed under the License is distributed on an "AS IS" BASIS, - * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - * See the License for the specific language governing permissions and - * limitations under the License. - * - ****************************************************************************** - */ - -/* Includes ------------------------------------------------------------------*/ -#include "usbd_msc_mem.h" -#include "usb_conf.h" - -#include "misc.h" -#include "storage.h" -#include "diskio.h" - -/** @addtogroup STM32_USB_OTG_DEVICE_LIBRARY - * @{ - */ - - -/** @defgroup STORAGE - * @brief media storage application module - * @{ - */ - -/** @defgroup STORAGE_Private_TypesDefinitions - * @{ - */ -/** - * @} - */ - - -/** @defgroup STORAGE_Private_Defines - * @{ - */ - -#define STORAGE_LUN_NBR 1 -/** - * @} - */ - - -/** @defgroup STORAGE_Private_Macros - * @{ - */ -/** - * @} - */ - - -/** @defgroup STORAGE_Private_Variables - * @{ - */ -/* USB Mass storage Standard Inquiry Data */ -const int8_t STORAGE_Inquirydata[] = {//36 - - /* LUN 0 */ - 0x00, - 0x00, // make it 0x80 for a removable drive - 0x02, - 0x02, - (USBD_STD_INQUIRY_LENGTH - 5), - 0x00, - 0x00, - 0x00, - 'S', 'T', 'M', ' ', ' ', ' ', ' ', ' ', /* Manufacturer : 8 bytes */ - 'm', 'i', 'c', 'r', 'o', 'S', 'D', ' ', /* Product : 16 Bytes */ - 'F', 'l', 'a', 's', 'h', ' ', ' ', ' ', - '1', '.', '0' ,'0', /* Version : 4 Bytes */ -}; - -/** - * @} - */ - - -/** @defgroup STORAGE_Private_FunctionPrototypes - * @{ - */ -int8_t STORAGE_Init (uint8_t lun); - -int8_t STORAGE_GetCapacity (uint8_t lun, - uint32_t *block_num, - uint32_t *block_size); - -int8_t STORAGE_IsReady (uint8_t lun); - -int8_t STORAGE_IsWriteProtected (uint8_t lun); - -int8_t STORAGE_Read (uint8_t lun, - uint8_t *buf, - uint32_t blk_addr, - uint16_t blk_len); - -int8_t STORAGE_Write (uint8_t lun, - uint8_t *buf, - uint32_t blk_addr, - uint16_t blk_len); - -int8_t STORAGE_GetMaxLun (void); - - -USBD_STORAGE_cb_TypeDef USBD_MICRO_SDIO_fops = -{ - STORAGE_Init, - STORAGE_GetCapacity, - STORAGE_IsReady, - STORAGE_IsWriteProtected, - STORAGE_Read, - STORAGE_Write, - STORAGE_GetMaxLun, - (int8_t *)STORAGE_Inquirydata, -}; - -USBD_STORAGE_cb_TypeDef *USBD_STORAGE_fops = &USBD_MICRO_SDIO_fops; -/* -#ifndef USE_STM3210C_EVAL -extern SD_CardInfo SDCardInfo; -#endif -*/ - -/** - * @} - */ - - -/** @defgroup STORAGE_Private_Functions - * @{ - */ - - -/** - * @brief Initialize the storage medium - * @param lun : logical unit number - * @retval Status - */ - -int8_t STORAGE_Init (uint8_t lun) -{ - /* -#ifndef USE_STM3210C_EVAL - NVIC_InitTypeDef NVIC_InitStructure; - NVIC_InitStructure.NVIC_IRQChannel = SDIO_IRQn; - NVIC_InitStructure.NVIC_IRQChannelPreemptionPriority =0; - NVIC_InitStructure.NVIC_IRQChannelSubPriority = 0; - NVIC_InitStructure.NVIC_IRQChannelCmd = ENABLE; - NVIC_Init(&NVIC_InitStructure); -#endif - if( SD_Init() != 0) - { - return (-1); - } - */ - - return (0); - -} - -/** - * @brief return medium capacity and block size - * @param lun : logical unit number - * @param block_num : number of physical block - * @param block_size : size of a physical block - * @retval Status - */ -int8_t STORAGE_GetCapacity (uint8_t lun, uint32_t *block_num, uint32_t *block_size) -{ -/* -#ifdef USE_STM3210C_EVAL - SD_CardInfo SDCardInfo; - - SD_GetCardInfo(&SDCardInfo); - -#else - if(SD_GetStatus() != 0 ) - { - return (-1); - } -#endif - */ - - - *block_size = storage_get_block_size(); - //*block_num = SDCardInfo.CardCapacity / 512; - *block_num = storage_get_block_count(); - - return (0); - -} - -/** - * @brief check whether the medium is ready - * @param lun : logical unit number - * @retval Status - */ -int8_t STORAGE_IsReady (uint8_t lun) -{ - /* -#ifndef USE_STM3210C_EVAL - - static int8_t last_status = 0; - - if(last_status < 0) - { - SD_Init(); - last_status = 0; - } - - if(SD_GetStatus() != 0) - { - last_status = -1; - return (-1); - } -#else - if( SD_Init() != 0) - { - return (-1); - } -#endif -*/ - return (0); -} - -/** - * @brief check whether the medium is write-protected - * @param lun : logical unit number - * @retval Status - */ -int8_t STORAGE_IsWriteProtected (uint8_t lun) -{ - return 0; -} - -/** - * @brief Read data from the medium - * @param lun : logical unit number - * @param buf : Pointer to the buffer to save data - * @param blk_addr : address of 1st block to be read - * @param blk_len : nmber of blocks to be read - * @retval Status - */ -int8_t STORAGE_Read (uint8_t lun, - uint8_t *buf, - uint32_t blk_addr, - uint16_t blk_len) -{ - /* - if( SD_ReadMultiBlocks (buf, - blk_addr * 512, - 512, - blk_len) != 0) - { - return -1; - } -#ifndef USE_STM3210C_EVAL - SD_WaitReadOperation(); - while (SD_GetStatus() != SD_TRANSFER_OK); -#endif -*/ - disk_read(0, buf, blk_addr, blk_len); - return 0; -} -/** - * @brief Write data to the medium - * @param lun : logical unit number - * @param buf : Pointer to the buffer to write from - * @param blk_addr : address of 1st block to be written - * @param blk_len : nmber of blocks to be read - * @retval Status - */ -int8_t STORAGE_Write (uint8_t lun, - uint8_t *buf, - uint32_t blk_addr, - uint16_t blk_len) -{ - - /* - if( SD_WriteMultiBlocks (buf, - blk_addr * 512, - 512, - blk_len) != 0) - { - return -1; - } -#ifndef USE_STM3210C_EVAL - SD_WaitWriteOperation(); - while (SD_GetStatus() != SD_TRANSFER_OK); -#endif -*/ - disk_write(0, buf, blk_addr, blk_len); - storage_flush(); // XXX hack for now so that the cache is always flushed - return (0); -} - -/** - * @brief Return number of supported logical unit - * @param None - * @retval number of logical unit - */ - -int8_t STORAGE_GetMaxLun (void) -{ - return (STORAGE_LUN_NBR - 1); -} -/** - * @} - */ - - -/** - * @} - */ - - -/** - * @} - */ - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ - diff --git a/stm/lib/usbd_usr.c b/stm/lib/usbd_usr.c deleted file mode 100644 index a5a7fb7ff..000000000 --- a/stm/lib/usbd_usr.c +++ /dev/null @@ -1,115 +0,0 @@ -/** - ****************************************************************************** - * @file usbd_usr.c - * @author MCD Application Team - * @version V1.1.0 - * @date 19-March-2012 - * @brief This file includes the user application layer - ****************************************************************************** - * @attention - * - *

© COPYRIGHT 2012 STMicroelectronics

- * - * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License"); - * You may not use this file except in compliance with the License. - * You may obtain a copy of the License at: - * - * http://www.st.com/software_license_agreement_liberty_v2 - * - * Unless required by applicable law or agreed to in writing, software - * distributed under the License is distributed on an "AS IS" BASIS, - * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - * See the License for the specific language governing permissions and - * limitations under the License. - * - ****************************************************************************** - */ - -#include "usbd_usr.h" -#include "usbd_ioreq.h" -#include "std.h" - -USBD_Usr_cb_TypeDef USR_cb = { - USBD_USR_Init, - USBD_USR_DeviceReset, - USBD_USR_DeviceConfigured, - USBD_USR_DeviceSuspended, - USBD_USR_DeviceResumed, - USBD_USR_DeviceConnected, - USBD_USR_DeviceDisconnected, -}; - -/** -* @brief USBD_USR_Init -* Displays the message on LCD for host lib initialization -* @param None -* @retval None -*/ -void USBD_USR_Init() { - //printf("USB OTG FS\n"); - //printf("USB device start\n"); -} - -/** -* @brief USBD_USR_DeviceReset -* Displays the message on LCD on device Reset Event -* @param speed : device speed -* @retval None -*/ -void USBD_USR_DeviceReset(uint8_t speed) { - //printf("USB reset %d\n", speed); -} - -/** -* @brief USBD_USR_DeviceConfigured -* Displays the message on LCD on device configuration Event -* @param None -* @retval Staus -*/ -void USBD_USR_DeviceConfigured() { - //printf("USB dev config\n"); -} - -/** -* @brief USBD_USR_DeviceSuspended -* Displays the message on LCD on device suspend Event -* @param None -* @retval None -*/ -void USBD_USR_DeviceSuspended() { - //printf("USB dev suspend\n"); -} - -/** -* @brief USBD_USR_DeviceResumed -* Displays the message on LCD on device resume Event -* @param None -* @retval None -*/ -void USBD_USR_DeviceResumed() { - //printf("USB dev resume\n"); -} - - -/** -* @brief USBD_USR_DeviceConnected -* Displays the message on LCD on device connection Event -* @param None -* @retval Staus -*/ -void USBD_USR_DeviceConnected() { - //printf("USB dev connect\n"); -} - - -/** -* @brief USBD_USR_DeviceDisonnected -* Displays the message on LCD on device disconnection Event -* @param None -* @retval Staus -*/ -void USBD_USR_DeviceDisconnected() { - //printf("USB dev disconn\n"); -} - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/stm/lib/usbd_usr.h b/stm/lib/usbd_usr.h deleted file mode 100644 index bd5ff3e2e..000000000 --- a/stm/lib/usbd_usr.h +++ /dev/null @@ -1,141 +0,0 @@ -/** - ****************************************************************************** - * @file usbd_usr.h - * @author MCD Application Team - * @version V1.1.0 - * @date 19-March-2012 - * @brief Header file for usbd_usr.c - ****************************************************************************** - * @attention - * - *

© COPYRIGHT 2012 STMicroelectronics

- * - * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License"); - * You may not use this file except in compliance with the License. - * You may obtain a copy of the License at: - * - * http://www.st.com/software_license_agreement_liberty_v2 - * - * Unless required by applicable law or agreed to in writing, software - * distributed under the License is distributed on an "AS IS" BASIS, - * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - * See the License for the specific language governing permissions and - * limitations under the License. - * - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __USBD_USR_H__ -#define __USBD_USR_H__ - -/* Includes ------------------------------------------------------------------*/ -#include "usbd_core.h" - - -/** @addtogroup USBD_USER - * @{ - */ - -/** @addtogroup USBD_MSC_DEMO_USER_CALLBACKS - * @{ - */ - -/** @defgroup USBD_USR - * @brief This file is the Header file for usbd_usr.c - * @{ - */ - - -/** @defgroup USBD_USR_Exported_Types - * @{ - */ - -extern USBD_Usr_cb_TypeDef USR_cb; -extern USBD_Usr_cb_TypeDef USR_FS_cb; -extern USBD_Usr_cb_TypeDef USR_HS_cb; - - - -/** - * @} - */ - - - -/** @defgroup USBD_USR_Exported_Defines - * @{ - */ - -/** - * @} - */ - -/** @defgroup USBD_USR_Exported_Macros - * @{ - */ -/** - * @} - */ - -/** @defgroup USBD_USR_Exported_Variables - * @{ - */ - -void USBD_USR_Init(void); -void USBD_USR_DeviceReset (uint8_t speed); -void USBD_USR_DeviceConfigured (void); -void USBD_USR_DeviceSuspended(void); -void USBD_USR_DeviceResumed(void); - -void USBD_USR_DeviceConnected(void); -void USBD_USR_DeviceDisconnected(void); - -void USBD_USR_FS_Init(void); -void USBD_USR_FS_DeviceReset (uint8_t speed); -void USBD_USR_FS_DeviceConfigured (void); -void USBD_USR_FS_DeviceSuspended(void); -void USBD_USR_FS_DeviceResumed(void); - -void USBD_USR_FS_DeviceConnected(void); -void USBD_USR_FS_DeviceDisconnected(void); - -void USBD_USR_HS_Init(void); -void USBD_USR_HS_DeviceReset (uint8_t speed); -void USBD_USR_HS_DeviceConfigured (void); -void USBD_USR_HS_DeviceSuspended(void); -void USBD_USR_HS_DeviceResumed(void); - -void USBD_USR_HS_DeviceConnected(void); -void USBD_USR_HS_DeviceDisconnected(void); - -/** - * @} - */ - -/** @defgroup USBD_USR_Exported_FunctionsPrototype - * @{ - */ -/** - * @} - */ - -#endif /*__USBD_USR_H__*/ - -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ - - - - -- cgit v1.2.3