From 7ca1bd314bd5e3146f8c868f91af54d17dd04d45 Mon Sep 17 00:00:00 2001
From: Daniel Campora
Date: Wed, 27 May 2015 13:59:59 +0200
Subject: docs: Generate a separate docs build for each port.

Using Damien's approach where conf.py and topindex.html are
shared by all ports.
---
 docs/tutorial/debounce.rst | 37 -------------------------------------
 1 file changed, 37 deletions(-)
 delete mode 100644 docs/tutorial/debounce.rst

(limited to 'docs/tutorial/debounce.rst')

diff --git a/docs/tutorial/debounce.rst b/docs/tutorial/debounce.rst
deleted file mode 100644
index f730e1d34..000000000
--- a/docs/tutorial/debounce.rst
+++ /dev/null
@@ -1,37 +0,0 @@
-Debouncing a pin input
-======================
-
-A pin used as input from a switch or other mechanical device can have a lot
-of noise on it, rapidly changing from low to high when the switch is first
-pressed or released.  This noise can be eliminated using a capacitor (a
-debouncing circuit).  It can also be eliminated using a simple function that
-makes sure the value on the pin is stable.
-
-The following function does just this.  It gets the current value of the given
-pin, and then waits for the value to change.  The new pin value must be stable
-for a continuous 20ms for it to register the change.  You can adjust this time
-(to say 50ms) if you still have noise. ::
-
-    import pyb
-
-    def wait_pin_change(pin):
-        # wait for pin to change value
-        # it needs to be stable for a continuous 20ms
-        cur_value = pin.value()
-        active = 0
-        while active < 20:
-            if pin.value() != cur_value:
-                active += 1
-            else:
-                active = 0
-            pyb.delay(1)
-
-
-Use it something like this::
-
-    import pyb
-
-    pin_x1 = pyb.Pin('X1', pyb.Pin.IN, pyb.Pin.PULL_DOWN)
-    while True:
-        wait_pin_change(pin_x1)
-        pyb.LED(4).toggle()
-- 
cgit v1.2.3