| Age | Commit message (Collapse) | Author | |
|---|---|---|---|
| 2015-06-03 | stmhal: Fix slow SPI DMA transfers by removing wfi from DMA wait loop. | Damien George | |
| Addresses issue #1268. | |||
| 2015-06-01 | stmhal: Add support for UART5 | Dave Hylands | |
| I tested this on my CERB40 board and it seems to be working fine. | |||
| 2015-05-28 | stmhal: Fix off-by-one error when checking for valid I2C and SPI bus. | Damien George | |
| 2015-05-27 | stmhal: Allow to name SPI busses, and give them names for pyboard. | Damien George | |
| 2015-05-27 | stmhal: Allow to name I2C busses, and give them names for pyboard. | Damien George | |
| 2015-05-27 | stmhal: Remove PYBVxx defines and use config vars for UART/CAN names. | Damien George | |
| Now all stmhal-based boards can name their peripherals (if they want) to any string. | |||
| 2015-05-24 | stmhal: Implement sys.std{in,out,err}.buffer, for raw byte mode. | Damien George | |
| It's configurable and only enabled for stmhal port. | |||
| 2015-05-24 | stmhal: Detect disk full condition | Dave Hylands | |
| 2015-05-23 | stmhal: Make pendsv variable non-static so gcc-5 doesn't opt it away. | Damien George | |
| 2015-05-17 | py/binary: Make return type of mp_binary_get_size size_t instead of int. | Kaspar Schleiser | |
| Fixes sign-compare warning. | |||
| 2015-05-13 | stmhal: Add readinto and readlines methods to sys.stdin, pyb.USB_VCP(). | Damien George | |
| Addresses issue #1255. | |||
| 2015-05-13 | lib: Move time utility functions to common library. | Josef Gajdusek | |
| 2015-05-12 | stmhal: Add os.rename function. | Steve Zatz | |
| 2015-05-12 | py: Add mp_obj_get_int_truncated and use it where appropriate. | Damien George | |
| mp_obj_get_int_truncated will raise a TypeError if the argument is not an integral type. Use mp_obj_int_get_truncated only when you know the argument is a small or big int. | |||
| 2015-05-11 | sthmal/rtc.c: Add calibration() method to get/set RTC fine-tuning value. | blmorris | |
| 2015-05-06 | stmhal: Move debug UART repl to after uart_init0 call. | Dave Hylands | |
| 2015-05-06 | pyexec: Make raw REPL work with event-driven version of pyexec. | Damien George | |
| esp8266 port now has working raw and friendly REPL, as well as working soft reset (CTRL-D at REPL, or raise SystemExit). tools/pyboard.py now works with esp8266 port. | |||
| 2015-05-04 | modstruct: Rename module to "ustruct", to allow full Python-level impl. | Paul Sokolovsky | |
| 2015-05-04 | lib: Move some common mod_network_* functions to lib/netutils. | Josef Gajdusek | |
| 2015-05-03 | stmhal: Allow to configure UART pins completely via mpconfigboard.h. | Eero af Heurlin | |
| 2015-04-29 | stmhal: Automatically re-enable IRQs on the USB REPL. | Dave Hylands | |
| This allows errors to be seen and prevents hanging the board from doing: pyb.disable_irq() | |||
| 2015-04-29 | mp-readline: Save "prompt" string in readline state. | Damien George | |
| 2015-04-28 | py: Replace py-version.sh with makeversionhdr.py, written in Python. | Damien George | |
| Also rename py-version.h to mpversion.h for consistency with mpconfig.h. | |||
| 2015-04-28 | stmhal: Actually disable unhandled timer interrupts. | Dave Hylands | |
| 2015-04-22 | stmhal: Reset the timer counter to zero after changing the auto reload. | Dave Hylands | |
| Because if the counter is above the new value of the auto-reload register then it may be a long time until the timer wraps around. | |||
| 2015-04-21 | stmhal: Implement os.uname() to get details of OS and hardware. | Damien George | |
| 2015-04-19 | stmhal/pyexec.c: Make raw REPL mode 8-bit clean. | Damien George | |
| 2015-04-18 | stmhal: Provide ADC capabilities for F401 and F411 MCUs. | Damien George | |
| Simply needed to define which pins have which ADC channel on them. | |||
| 2015-04-18 | stmhal: Add support for STM32F411 MCU. | Damien George | |
| 2015-04-18 | stmhal: For flash storage use same params for F407 as F405. | Damien George | |
| 2015-04-18 | stmhal: Add support for Espruino Pico board. | Damien George | |
| To build: make BOARD=ESPRUINO_PICO To deploy: short the BOOT0/BTN contact on the back of the board (eg by drawing over it with a graphite pencil), then hold down BTN while inserting the board into the USB port. The board should then enter DFU mode, and the firmware can be downloaded using: make BOARD=ESPRUINO_PICO deploy | |||
| 2015-04-18 | stmhal: Add stm32f401.ld for linking F401 targets. | Damien George | |
| 2015-04-18 | stmhal: Make ld and af files configurable within Makefile. | Damien George | |
| Each board now needs an mpconfigboard.mk file which defines AF_FILE and LD_FILE. Also moved stm32f405.ld to boards/ directory to keep things organised. | |||
| 2015-04-18 | stmhal: Add stm32f401_af.csv, for AF definitions of F401 MCUs. | Damien George | |
| 2015-04-18 | stmhal: Rename stm32f4xx_af.csv to stm32f405_af.csv. | Damien George | |
| Since this file is only valid for F405 MCUs, not generic F4xx. | |||
| 2015-04-18 | stmhal: Add support for flash filesystem on F401 MCUs. | Damien George | |
| It uses a 16k cache buffer and so the filesystem size is limited. | |||
| 2015-04-18 | stmhal: Allow extint.c to compile without USB HS support. | Damien George | |
| 2015-04-18 | stmhal: Make I2C busses and their pins configurable in mpconfigboard.h. | Damien George | |
| 2015-04-18 | stmhal: Exclude code for UARTs that don't exist in hardware. | Damien George | |
| 2015-04-18 | stmhal: Exclude USB HS code when USB HS mode not enabled. | Damien George | |
| 2015-04-18 | stmhal: Exclude code for those timers that don't exist in the hardware. | Damien George | |
| 2015-04-18 | stmhal: Make LCD initialiser use board pin names instead of cpu names. | Damien George | |
| 2015-04-18 | stmhal: For pins, define macros mapping board names to cpu names. | Damien George | |
| 2015-04-18 | stmhal: Make a HW config option for LED4 being controlled by PWM. | Damien George | |
| 2015-04-18 | stmhal: Make HSE PLL parameters configurable per board. | Damien George | |
| 2015-04-18 | stmhal: Add support for sending and receiving CAN RTR messages. | Henrik | |
| 2015-04-18 | stmhal: Remove std.h. It's not needed anymore. | Damien George | |
| 2015-04-16 | stmhal: Allow sending CAN messages with timeout=0. | Damien George | |
| Thanks to Henrik Sölver for this patch. | |||
| 2015-04-16 | stmhal: Use new %q format to print qstr's in a few more places. | blmorris | |
| Saves 68 bytes. | |||
| 2015-04-16 | py: Overhaul and simplify printf/pfenv mechanism. | Damien George | |
| Previous to this patch the printing mechanism was a bit of a tangled mess. This patch attempts to consolidate printing into one interface. All (non-debug) printing now uses the mp_print* family of functions, mainly mp_printf. All these functions take an mp_print_t structure as their first argument, and this structure defines the printing backend through the "print_strn" function of said structure. Printing from the uPy core can reach the platform-defined print code via two paths: either through mp_sys_stdout_obj (defined pert port) in conjunction with mp_stream_write; or through the mp_plat_print structure which uses the MP_PLAT_PRINT_STRN macro to define how string are printed on the platform. The former is only used when MICROPY_PY_IO is defined. With this new scheme printing is generally more efficient (less layers to go through, less arguments to pass), and, given an mp_print_t* structure, one can call mp_print_str for efficiency instead of mp_printf("%s", ...). Code size is also reduced by around 200 bytes on Thumb2 archs. | |||
 |
index : openmano-mpy | |
| MicroPython source and hardware configuration for OpenMano | Damien George |
| aboutsummaryrefslogtreecommitdiff |