openmano-mpy - MicroPython source and hardware configuration for OpenMano

Age	Commit message (Collapse)	Author
2014-03-30	stmhal: Implement selector for USB device mode; improve boot up.	Damien George
	Can now choose at boot up whether the USB device is CDC+MSC or CDC+HID. Choice is made by an option in boot.py, with default being CDC+MSC. HID+MSC is not currently supported, but should be easy to implement. Boot up now has ability to change the reset mode: hold down USR switch while booting and LEDs will count from 1 to 7 to indicate the boot mode. Release USR when correct mode is selected. Current modes are 1 (normal boot), 2 (safe mode), 3 (reset FS mode).
2014-03-29	stmhal: Add CDC+HID USB device.	Damien George
	The HID device must appear before the CDC in order for both to work at the same time. Whilst the code is working, it's not currently used.
2014-03-22	stmhal: Tidy up USB CDC+MSC device some more.	Damien George

2014-03-22	stmhal: Tidy up USB device configuration. Make it use less RAM.	Damien George

2014-03-22	stmhal: USB CDC and MSC device work together.	Damien George

2014-03-21	stmhal: Add support for USB MSC device.	Damien George
	This gives a functioning, independent MSC device.
2014-03-14	stmhal: Get USB enumerating a CDC device.	Damien George
	Enumerates CDC device over USB, but doesn't transmit/receive yet.
2014-03-11	Initial checkin with STM HAL	Dave Hylands
	This compiles and links, but hasn't been tested on a board yet and even if it was run, it doesn't currently do anything.