| Age | Commit message (Collapse) | Author |
|---|
|
|
|
|
|
This allows user classes to implement __abs__ special method, and saves
code size (104 bytes for x86_64), even though during refactor, an issue
was fixed and few optimizations were made:
* abs() of minimum (negative) small int value is calculated properly.
* objint_longlong and objint_mpz avoid allocating new object is the
argument is already non-negative.
|
|
|
|
Variable arguments in a macro should take at least 1 argument.
|
|
As a pointer (const char *) it takes up an extra word of storage which is
in RAM.
|
|
Tested using Clang on self-hosted Termux environment https://termux.com/.
|
|
If, for class X, X.__add__(Y) doesn't exist (or returns NotImplemented),
try Y.__radd__(X) instead.
This patch could be simpler, but requires undoing operand swap and
operation switch to get non-confusing error message in case __radd__
doesn't exist.
|
|
Defaults of 4096 and 5 respectively are too high to esp8266, causing
out of memory with a database beyond couple of pages.
|
|
Reduces code size by about 10 bytes.
|
|
This is to allow to place reverse ops immediately after normal ops, so
they can be tested as one range (which is optimization for reverse ops
introduction in the next patch).
|
|
Originally, there were grouped in blocks of 5, to make it easier e.g.
to assess and numeric code of each. But now it makes more sense to
group it by semantics/properties, and then split in chunks still,
which usually leads to chunks of ~6 ops.
|
|
After recent refactorings to mp_binary_op_t, and make it future refactoring
proof for now, at the cost of extra element in the array.
|
|
It starts a dichotomy of mp_binary_op_t values which can't appear in the
bytecode. Another reason to move it is to VALUES of OP_* and OP_INPLACE_*
nicely adjacent. This also will be needed for OP_REVERSE_*, to be soon
introduced.
|
|
This is to allow to encode arithmetic operations more efficiently, in
preparation to introduction of __rOP__ method support.
|
|
Should raise TypeError, unless it's (in)equality comparison.
|
|
This patch adds a function utf8_check() to check for a valid UTF-8 encoded
string, and calls it when constructing a str from raw bytes. The feature
is selectable at compile time via MICROPY_PY_BUILTINS_STR_UNICODE_CHECK and
is enabled if unicode is enabled. It costs about 110 bytes on Thumb-2, 150
bytes on Xtensa and 170 bytes on x86-64.
|
|
Also renames "stmhal" to "stm32" in documentation and everywhere else.
|
|
Should raise TypeError, unless it's (in)equality comparison.
|
|
If __iop__ is not defined, call __op__ instead. This is desired behavior
for immutable types, __iop__ needs to be defined only for mutable types.
|
|
|
|
IEEE floating point is specified such that a comparison of NaN with itself
returns false, and Python respects these semantics. This patch makes uPy
also have these semantics. The fix has a minor impact on the speed of the
object-equality fast-path, but that seems to be unavoidable and it's much
more important to have correct behaviour (especially in this case where
the wrong answer for nan==nan is silently returned).
|
|
These are now returned as "operation not supported" instead of raising
TypeError. In particular, this fixes equality for float vs incompatible
types, which now properly results in False instead of exception. This
also paves the road to support reverse operation (e.g. __radd__) with
float objects.
This is achieved by introducing mp_obj_get_float_maybe(), similar to
existing mp_obj_get_int_maybe().
|
|
"b" on Thumb might not be long enough for the jump to nlr_push_tail so it
must be done indirectly.
|
|
They are not used by any component and take up valuable flash space.
|
|
Prior to this patch, the size of the buffer given to pack_into() was checked
for being too small by using the count of the arguments, not their actual
size. For example, a format spec of '4I' would only check that there was 4
bytes available, not 16; and 'I' would check for 1 byte, not 4.
The pack() function is ok because its buffer is created to be exactly the
correct size.
The fix in this patch calculates the total size of the format spec at the
start of pack_into() and verifies that the buffer is large enough. This
adds some computational overhead, to iterate through the whole format spec.
The alternative is to check during the packing, but that requires extra
code to handle alignment, and the check is anyway not needed for pack().
So to maintain minimal code size the check is done using struct_calcsize.
|
|
Prior to this patch, the size of the buffer given to unpack/unpack_from was
checked for being too small by using the count of the arguments, not their
actual size. For example, a format spec of '4I' would only check that
there was 4 bytes available, not 16; and 'I' would check for 1 byte, not 4.
This bug is fixed in this patch by calculating the total size of the format
spec at the start of the unpacking function. This function anyway needs to
calculate the number of items at the start, so calculating the total size
can be done at the same time.
|
|
This patch makes a repeat counter behave the same as repeating the
typecode, when there are not enough args. For example:
struct.pack('2I', 1) now behave the same as struct.pack('II', 1).
|
|
|
|
Maps are always allocated "statically" and (de)initialised via mp_map_init
and mp_map_deinit.
|
|
|
|
Now traces more explicitly thru the lookup process.
|
|
|
|
This comment style is no longer used because the docs are written by hand,
not generated.
|
|
NotImplemented means "try other fallbacks (like calling __rop__
instead of __op__) and if nothing works, raise TypeError". As
MicroPython doesn't implement any fallbacks, signal to raise
TypeError right away.
|
|
The unary-op/binary-op enums are already defined, and there are no
arithmetic tricks used with these types, so it makes sense to use the
correct enum type for arguments that take these values. It also reduces
code size quite a bit for nan-boxing builds.
|
|
Using gcc -Wpedantic will warn that #define of defined() is non-portable
and this patch fixes this.
|
|
Otherwise, it will silently get incorrect result on other values types,
including CPython tuple form like "foo.png".endswith(("png", "jpg"))
(which MicroPython doesn't support for unbloatedness).
|
|
This macro is provided by stmhal/mphalport.h and makes sure the addr and
size arguments are correctly aligned.
|
|
|
|
|
|
|
|
This allows the command to succeed without error even if there is no
$(BUILD)/build directory, which is the case for mpy-cross.
|
|
Per POSIX, this is EINVAL, so raises OSError(EINVAL).
|
|
For SEEK_SET, offset should be treated as unsigned, to allow full-width
stream sizes (e.g. 32-bit instead of 31-bit). This is now fully documented
in stream.h. Also, seek symbolic constants are added.
|
|
Too big positive, or too big negative offset values could lead to overflow
and address space wraparound and thus access to unrelated areas of memory
(a security issue).
|
|
The value of 0 can't be used because otherwise mp_binary_get_size will let
a null byte through as the type code (intepreted as byterray). This can
lead to invalid type-specifier strings being let through without an error
in the struct module, and even buffer overruns.
|
|
It enables all the DEBUG_printf outputs in the py/ source code.
|
|
Without bugfix:
struct.pack('>Q', 16)
b'\x00\x00\x00\x10\x00\x00\x00\x00'
With bugfix:
struct.pack('>Q', 16)
b'\x00\x00\x00\x00\x00\x00\x00\x10'
|
|
- Changed: ValueError, TypeError, NotImplementedError
- OSError invocations unchanged, because the corresponding utility
function takes ints, not strings like the long form invocation.
- OverflowError, IndexError and RuntimeError etc. not changed for now
until we decide whether to add new utility functions.
|
