| Age | Commit message (Collapse) | Author |
|---|
|
Reduces by about a factor of 10 on average the amount of RAM needed to
store the line-number to bytecode map in the bytecode prelude.
Using CPython3.4's stdlib for statistics: previously, an average of
13 bytes were used per (bytecode offset, line-number offset) pair, and
now with this improvement, that's down to 1.3 bytes on average.
Large RAM usage before was due to some very large steps in line numbers,
both from the start of the first line in a function way down in the
file, and also functions that have big comments and/or big strings in
them (both cases were significant).
Although the savings are large on average for the CPython stdlib, it
won't have such a big effect for small scripts used in embedded
programming.
Addresses issue #648.
|
|
See discussion in issue #50.
|
|
|
|
This reduces stack usage by 16 words (64 bytes) for stmhal/ port.
See issue #640.
|
|
- Move the includes for alloca() intp mpconfigport.h
|
|
To clearly signify that lineno is not known.
|
|
|
|
This renames:
MICROPY_PY_FROZENSET -> MICROPY_PY_BUILTINS_FROZENSET
MICROPY_PY_PROPERTY -> MICROPY_PY_BUILTINS_PROPERTY
MICROPY_PY_SLICE -> MICROPY_PY_BUILTINS_SLICE
MICROPY_ENABLE_FLOAT -> MICROPY_PY_BUILTINS_FLOAT
See issue #35 for discussion.
|
|
This may seem a bit of a risky change, in that it may introduce crazy
bugs with respect to volatile variables in the VM loop. But, I think it
should be fine: code_state points to some external memory, so the
compiler should always read/write to that memory when accessing the
ip/sp variables (ie not put them in registers).
Anyway, it passes all tests and improves on all efficiency fronts: about
2-4% faster (64-bit unix), 16 bytes less stack space per call (64-bit
unix) and slightly less executable size (unix and stmhal).
The reason it's more efficient is save_ip and save_sp were volatile
variables, so were anyway stored on the stack (in memory, not regs).
Thus converting them to code_state->{ip, sp} doesn't cost an extra
memory dereference (except maybe to get code_state, but that can be put
in a register and then made more efficient for other uses of it).
|
|
pfalcon-vm-alloca
Conflicts:
py/vm.c
Fixed stack underflow check. Use UINT_FMT/INT_FMT where necessary.
Specify maximum VM-stack byte size by multiple of machine word size, so
that on 64 bit machines it has same functionality as 32 bit.
|
|
|
|
This improves stack usage in callers to mp_execute_bytecode2, and is step
forward towards unifying execution interface for function and generators
(which is important because generators don't even support full forms
of arguments passing (keywords, etc.)).
|
|
This makes sure that only as much stack allocated as actually used, reducing
stack usage for each Python function call.
|
|
|
|
|
|
Needed to pop the iterator object when breaking out of a for loop. Need
also to be careful to unwind exception handler before popping iterator.
Addresses issue #635.
|
|
Addresses issue #627.
|
|
This helps the compiler do its optimisation, makes it clear which
variables are local per opcode and which global, and makes it consistent
when extra variables are needed in an opcode (in addition to old obj1,
obj2 pair, for example).
Could also make unum local, but that's for another time.
|
|
Older int-only encoding is not expressive enough to support arbitrary slice
assignment operations.
|
|
Now of the form MICROPY_PY_*. See issue #35.
|
|
MP_ALLOC_* -> MICROPY_ALLOC_*
MICROPY_PATH_MAX -> MICROPY_ALLOC_PATH_MAX
MICROPY_ENABLE_REPL_HELPERS -> MICROPY_HELPER_REPL
MICROPY_ENABLE_LEXER_UNIX -> MICROPY_HELPER_LEXER_UNIX
MICROPY_EXTRA_* -> MICROPY_PORT_*
See issue #35.
|
|
|
|
This is better than forcing each getiter() implementation to raise exception.
|
|
bytecode is the more widely used. See issue #590.
|
|
|
|
Blanket wide to all .c and .h files. Some files originating from ST are
difficult to deal with (license wise) so it was left out of those.
Also merged modpyb.h, modos.h, modstm.h and modtime.h in stmhal/.
|
|
Specifically, nlr.h does.
|
|
It's the same as LOAD_CONST_STR.
|
|
Remembering the last op is rarely needed, and when it is, can simply use
*save_ip.
|
|
|
|
|
|
|
|
3 emitter functions are needed only for emitcpy, and so we can #if them
out when compiling with emitcpy support.
Also remove unused SETUP_LOOP bytecode.
|
|
Closed over variables are now passed on the stack, instead of creating a
tuple and passing that. This way memory for the closed over variables
can be allocated within the closure object itself. See issue #510 for
background.
|
|
On stmhal, computed gotos make the binary about 1k bigger, but makes it
run faster, and we have the room, so why not. All tests pass on
pyboard using computed gotos.
|
|
Also make consistent use of MP_OBJ_NOT_SUPPORTED and MP_OBJ_NULL.
This helps a lot in debugging and understanding of function API.
|
|
mp_obj_t->subscr now does load/store/delete.
|
|
Things get tricky when using the nlr code to catch exceptions. Need to
ensure that the variables (stack layout) in the exception handler are
the same as in the bit protected by the exception handler.
Prior to this patch there were a few bugs. 1) The constant
mp_const_MemoryError_obj was being preloaded to a specific location on
the stack at the start of the function. But this location on the stack
was being overwritten in the opcode loop (since it didn't think that
variable would ever be referenced again), and so when an exception
occurred, the variable holding the address of MemoryError was corrupt.
2) The FOR_ITER opcode detection in the exception handler used sp, which
may or may not contain the right value coming out of the main opcode
loop.
With this patch there is a clear separation of variables used in the
opcode loop and in the exception handler (should fix issue (2) above).
Furthermore, nlr_raise is no longer used in the opcode loop. Instead,
it jumps directly into the exception handler. This tells the C compiler
more about the possible code flow, and means that it should have the
same stack layout for the exception handler. This should fix issue (1)
above. Indeed, the generated (ARM) assembler has been checked explicitly,
and with 'goto exception_handler', the problem with &MemoryError is
fixed.
This may now fix problems with rge-sm, and probably many other subtle
bugs yet to show themselves. Incidentally, rge-sm now passes on
pyboard (with a reduced range of integration)!
Main lesson: nlr is tricky. Don't use nlr_push unless you know what you
are doing! Luckily, it's not used in many places. Using nlr_raise/jump
is fine.
|
|
|
|
|
|
Disabled by default. Enabled in unix port.
|
|
|
|
Attempt to address issue #386. unique_code_id's have been removed and
replaced with a pointer to the "raw code" information. This pointer is
stored in the actual byte code (aligned, so the GC can trace it), so
that raw code (ie byte code, native code and inline assembler) is kept
only for as long as it is needed. In memory it's now like a tree: the
outer module's byte code points directly to its children's raw code. So
when the outer code gets freed, if there are no remaining functions that
need the raw code, then the children's code gets freed as well.
This is pretty much like CPython does it, except that CPython stores
indexes in the byte code rather than machine pointers. These indices
index the per-function constant table in order to find the relevant
code.
|
|
This is necessary to catch all cases where locals are referenced before
assignment. We still keep the _0, _1, _2 versions of LOAD_FAST to help
reduced the byte code size in RAM.
Addresses issue #457.
|
|
This simplifies the compiler a little, since now it can do 1 pass over
a function declaration, to determine default arguments. I would have
done this originally, but CPython 3.3 somehow had the default keyword
args compiled before the default position args (even though they appear
in the other order in the text of the script), and I thought it was
important to have the same order of execution when evaluating default
arguments. CPython 3.4 has changed the order to the more obvious one,
so we can also change.
|
|
|
|
|
|
|
|
Needed to reinstate 2 delete opcodes, to specifically check that a local
is not deleted twice.
|
|
This makes the runtime and object APIs more consistent. mp_store_subscr
functionality now moved into objects (ie list and dict store_item).
|
