openmano-mpy - MicroPython source and hardware configuration for OpenMano

Age	Commit message (Collapse)	Author
2015-03-26	cc3200: Reenable active interrupts when waking from suspended mode.	Daniel Campora

2015-03-26	cc3200: Add callback support to the UART for RX interrupts.	Daniel Campora

2015-03-25	cc3200: Add GPIO25 to the pins list of the WiPy and the WiPy-SD.	Daniel Campora
	This allows to properly initialize the system led and add it to the sleep module so that it can be restored when resuming from suspended mode.
2015-03-21	cc3200: Remove superfluous code in pybsleep.	danicampora

2015-03-21	cc3200: Re-name pybsystick to mpsystick.	danicampora

2015-03-16	cc3200: Remove double administration of callback objects.	danicampora

2015-03-14	cc3200: Rewrite the PRCM RTC functionality methods.	danicampora
	This allows to use the On-Chip retention registers for both the RTC and to share notification flags between the bootloader and the application. The two flags being shared right now are the "safe boot" request and the WDT reset cause. we still have 2 more bits free for future use.
2015-03-14	cc3200: Increase heartbeat period from 3 to 5 seconds.	danicampora

2015-03-12	cc3200: Allow separate selection of the power mode in Pin callbacks.	danicampora

2015-03-11	cc3200: Add power management framework. Add mpcallback class.	danicampora
	Supports suspend and hibernate modes. Waking is possible throug GPIO and WLAN. The mpcallback class is generic and can be reused by other classes.
2015-03-11	cc3200: Merge ExtInt class into Pin class.	danicampora
	Also add another method to change the pin's interrupt mode on the fly.
2015-03-11	cc3200: Make WDT and HeartBeat constant objects on their own right.	danicampora

2015-02-28	cc3200: Add heartbeat signal on system led.	danicampora

2015-02-25	cc3200: Implement safe boot pin and system led behaviour.	danicampora
	The safe boot pin, when pulled high during reset rolls back the firmware to the "factory" image and skips execution of 'boot.py' and 'main.py'. This is useful to recover from a crash condition. The system led is used mostly to signal errors.
2015-02-25	cc3200: Add WDT functionality as part of the pyb module.	danicampora
	Also improve pybsd, and make it save it's pin configuration. This is a necessary step towards supporting the CC3200 low power deep sleep (LPDS) mode.
2015-02-22	cc3200: Remove dependencies from FreeRTOS.	danicampora
	Use the simplelink wrappers instead. This is one step further towards having a single module for the cc3200 and the cc3100.
2015-02-21	cc3200: Add explicit py/ path-prefix for py includes.	Damien George
	This is how it should be, so one knows exactly where the includes are coming from.
2015-02-13	cc3200: Add I2C module. Only master mode is currently supported.	danicampora

2015-02-13	stmhal: Make pybstdio usable by other ports, and use it.	Damien George
	Now all ports can use pybstdio.c to provide sys.stdin/stdout/stderr, so long as they implement mp_hal_stdin_* and mp_hal_stdout_* functions.
2015-02-09	cc3200: Rename GPIO module to Pin.	danicampora
	This change helps making the cc3200 port API a bit closer to stmhal. The ramaining differences are due to the specific hardware details of each chip. One feature that has been deliberately disabled is the possibility to add custom names and custom pin mappings. Those features are nice and convenient, but in this port, code size is a major concern.
2015-02-06	cc3200: Add cc3200 port of MicroPython.	danicampora
	The port currently implements support for GPIO, RTC, ExtInt and the WiFi subsystem. A small file system is available in the serial flash. A bootloader which makes OTA updates possible, is also part of this initial implementation.