openmano-mpy - MicroPython source and hardware configuration for OpenMano

Age	Commit message (Collapse)	Author
2015-06-10	cc3200: Add contructor to the HeartBeat class.	Daniel Campora

2015-06-07	cc3200: Add antenna selection feature to WLAN.	Daniel Campora

2015-03-25	cc3200: Add GPIO25 to the pins list of the WiPy and the WiPy-SD.	Daniel Campora
	This allows to properly initialize the system led and add it to the sleep module so that it can be restored when resuming from suspended mode.
2015-03-14	cc3200: Rewrite the PRCM RTC functionality methods.	danicampora
	This allows to use the On-Chip retention registers for both the RTC and to share notification flags between the bootloader and the application. The two flags being shared right now are the "safe boot" request and the WDT reset cause. we still have 2 more bits free for future use.
2015-03-14	cc3200: Increase heartbeat period from 3 to 5 seconds.	danicampora

2015-03-11	cc3200: Make WDT and HeartBeat constant objects on their own right.	danicampora

2015-02-28	cc3200: Add heartbeat signal on system led.	danicampora

2015-02-25	cc3200: Implement safe boot pin and system led behaviour.	danicampora
	The safe boot pin, when pulled high during reset rolls back the firmware to the "factory" image and skips execution of 'boot.py' and 'main.py'. This is useful to recover from a crash condition. The system led is used mostly to signal errors.
2015-02-06	cc3200: Add cc3200 port of MicroPython.	danicampora
	The port currently implements support for GPIO, RTC, ExtInt and the WiFi subsystem. A small file system is available in the serial flash. A bootloader which makes OTA updates possible, is also part of this initial implementation.