openmano-mpy - MicroPython source and hardware configuration for OpenMano

Age	Commit message (Collapse)	Author
2015-09-21	cc3200: Correct safe boot level 1 blinking period.	Daniel Campora

2015-08-16	cc3200: Don't clear the WDT special bit in the bootloader.	Daniel Campora

2015-08-09	cc3200: On the first boot, always make AP ssid='wipy-wlan'.	Daniel Campora
	On the first boot don't add the MAC address, this is to speed up factory testing.
2015-08-09	cc3200: Refactor PRCM special user bits implementation.	Daniel Campora

2015-08-09	cc3200: Enable bootloader safe boot on latest firmware.	Daniel Campora
	The first safe boot level executes the latest firmware but skips 'main.py' and 'boot.py'.
2015-07-15	cc3200: Implement new OTA mechanism with 2 firmware update slots.	Daniel Campora

2015-07-08	cc3200: Correct udelay us to ticks calculation.	Daniel Campora

2015-06-30	cc3200: Add CA, certificate and key files to the updater list.	Daniel Campora

2015-06-07	cc3200: Re-config antenna selection when waking from suspended mode.	Daniel Campora

2015-06-07	cc3200: Add antenna selection feature to WLAN.	Daniel Campora

2015-05-20	cc3200: Add uhashlib. Supports SHA1 and SHA256.	Daniel Campora

2015-04-29	cc3200: When requesting safe boot, blink the led 3 times, not 4.	Daniel Campora

2015-04-28	py: Replace py-version.sh with makeversionhdr.py, written in Python.	Damien George
	Also rename py-version.h to mpversion.h for consistency with mpconfig.h.
2015-04-19	cc3200: Fix bootloader and modpyb after printf overhaul.	Daniel Campora
	The bootloader needs string0.c because of memset, memcpy and others, without string0.c it magically links, but calling any of those functions results in a hard fault. In debug mode, modpyb needs printf, and including stdio.h leads to conflicts due to the redefinitions made in the simplelink drivers.
2015-04-18	cc3200: Clean up and reduce use/include of std.h.	Damien George

2015-04-17	cc3200: Clean up bootloader makefile and remove superflous assert.	Daniel Campora

2015-04-16	cc3200: Get bootloader compiling with latest overhaul of printf code.	Damien George

2015-04-05	cc3200: Fix typo after previous refactor.	Paul Sokolovsky

2015-04-05	string0.c: Move from stmhal/ to lib/.	Paul Sokolovsky

2015-03-16	cc3200: Update simplelink SPI driver to SDK release version 1.1.0.	danicampora

2015-03-16	cc3200: Update HAL to SDK release version 1.1.0.	danicampora

2015-03-14	cc3200: Rewrite the PRCM RTC functionality methods.	danicampora
	This allows to use the On-Chip retention registers for both the RTC and to share notification flags between the bootloader and the application. The two flags being shared right now are the "safe boot" request and the WDT reset cause. we still have 2 more bits free for future use.
2015-03-14	cc3200: Clean up linker scripts and startup file.	danicampora

2015-03-11	cc3200: Add power management framework. Add mpcallback class.	danicampora
	Supports suspend and hibernate modes. Waking is possible throug GPIO and WLAN. The mpcallback class is generic and can be reused by other classes.
2015-03-11	cc3200: Make WDT and HeartBeat constant objects on their own right.	danicampora

2015-02-28	cc3200: Create separate release/debug build directories	Johan Hendriks

2015-02-25	cc3200: Implement safe boot pin and system led behaviour.	danicampora
	The safe boot pin, when pulled high during reset rolls back the firmware to the "factory" image and skips execution of 'boot.py' and 'main.py'. This is useful to recover from a crash condition. The system led is used mostly to signal errors.
2015-02-25	cc3200: Add WDT functionality as part of the pyb module.	danicampora
	Also improve pybsd, and make it save it's pin configuration. This is a necessary step towards supporting the CC3200 low power deep sleep (LPDS) mode.
2015-02-22	cc3200: Add optimization flags to drivers/cc3100 in the debug build.	danicampora

2015-02-21	drivers/cc3100: Remove dependence on debug.h.	Damien George

2015-02-21	cc3200: Get compiling with CC3100 driver from drivers/ directory.	Damien George

2015-02-21	cc3200: Add explicit py/ path-prefix for py includes.	Damien George
	This is how it should be, so one knows exactly where the includes are coming from.
2015-02-21	cc3200: Add SD module and disable SD card support for the LAUNCHXL.	danicampora

2015-02-21	cc3200: Add exit values to the shell scripts.	danicampora

2015-02-20	cc3200: Change safe-boot pin to GPIO28.	danicampora

2015-02-20	cc3200: Remove asserts from sl_Stop() and reduce timeout to 250ms.	danicampora

2015-02-09	cc3200: Rename GPIO module to Pin.	danicampora
	This change helps making the cc3200 port API a bit closer to stmhal. The ramaining differences are due to the specific hardware details of each chip. One feature that has been deliberately disabled is the possibility to add custom names and custom pin mappings. Those features are nice and convenient, but in this port, code size is a major concern.
2015-02-09	cc3200: Add bootmanager relocator to the repository.	danicampora
	This file was accidentally skipped when the cc3200 port was added to the tree since binary files are by default igonerd by git. This is a small precompiled piece of software provided by TI that simply relocates the boot manager to the beginning of the RAM space after it has been written by the ROM bootloader.
2015-02-06	cc3200: Add cc3200 port of MicroPython.	danicampora
	The port currently implements support for GPIO, RTC, ExtInt and the WiFi subsystem. A small file system is available in the serial flash. A bootloader which makes OTA updates possible, is also part of this initial implementation.