| Age | Commit message (Collapse) | Author | |
|---|---|---|---|
| 2014-04-17 | stmhal: Fix 64-byte USB packet bug properly. | Damien George | |
| A 64-byte packet is now followed by a 0-byte packet if there is nothing more to send. This flushes the USB endpoint. | |||
| 2014-04-16 | stmhal: Replace magic number 3 with CDC_IN_EP define. | Damien George | |
| 2014-04-16 | Merge branch 'master' of github.com:micropython/micropython | Damien George | |
| 2014-04-16 | stmhal: Improve flash storage cache management. | Damien George | |
| Internal flash used for the filesystem is now written (from the cache) only after a 5s delay, or when a file is closed, or when the drive is unmounted from the host. This delay means that multiple writes can accumulate in the cache, and leads to less writes to the flash, making it last longer. It's implemented by a high-priority interrupt that takes care of flash erase and write, and flushing the cache. This is still only an interim solution for the flash filesystem. It eventually needs to be replaced with something that uses less RAM for the cache, something that can use more of the flash, and something that does proper wear levelling. | |||
| 2014-04-16 | Merge pull request #503 from lurch/patch-1 | Paul Sokolovsky | |
| fix tests/bytecode/README to match contents of tests/bytecode/run-tests | |||
| 2014-04-16 | fix README to match contents of run-tests | Andrew Scheller | |
| 2014-04-16 | stmhal: Add pyb.have_cdc function to check if USB CDC device is enabled. | Damien George | |
| 2014-04-16 | stmhal: Fix USB CDC buffer overrun error. | Damien George | |
| Need to wait for the low-level USB driver to send the data over the USB in-endpoint before the buffer can be used again. This patch adds a check for this. | |||
| 2014-04-16 | Merge pull request #497 from lurch/build-32bit | Damien George | |
| New config option MICROPY_FORCE_32BIT (defaulted to 0) | |||
| 2014-04-16 | tools: Fix up pybcdc.inf generation: new lines and hex digits. | Damien George | |
| Using Python's file open in 'r' mode opens it for text reading, which converts all new lines to \n. Could use 'rb' binary mode, but then don't have access to the string Template replacement functions. Thus, force the output to have '\\r\\n' ending. Also fix regex to match hex digits. | |||
| 2014-04-16 | Merge pull request #498 from lurch/create-headers-from-files | Damien George | |
| Auto-generate the stmhal/pybcdc_inf header file from static files | |||
| 2014-04-16 | Merge pull request #499 from lurch/skip-travis-tests | Damien George | |
| run-tests can now skip certain tests when run under Travis CI | |||
| 2014-04-16 | stmhal: Fix C bindings of I2C.read/write. | Damien George | |
| 2014-04-16 | run-tests can now skip certain tests when run under Travis CI | Andrew Scheller | |
| See the `skip_travis_tests` variable. Fixes #495 (also tidied up usage of os.path.basename() function) | |||
| 2014-04-16 | Auto-generate the stmhal/pybcdc_inf header file from static files | Andrew Scheller | |
| The USB VID&PID are automatically extracted from usbd_desc_cdc_msc.c and inserted into pybcdc_inf.template, ensuring that the same USB IDs get used everywhere | |||
| 2014-04-16 | New config option MICROPY_FORCE_32BIT (defaulted to 0) | Andrew Scheller | |
| Makes it easier for 64-bit unix hosts to build 32-bit unix binaries (for testing) | |||
| 2014-04-16 | stmhal: Add I2C functions for pure master read/write. | Damien George | |
| 2014-04-15 | py: Add len(bytes). | Damien George | |
| 2014-04-15 | py: Add builtin functions bin and oct, and some tests for them. | Damien George | |
| 2014-04-15 | Merge pull request #496 from dhylands/fix-debug-usart | Damien George | |
| Fix call to enable pyb_usart_global_debug. | |||
| 2014-04-15 | Fix call to enable pyb_usart_global_debug. | Dave Hylands | |
| 2014-04-15 | Merge branch 'master' of github.com:micropython/micropython | Damien George | |
| 2014-04-15 | stmhal: Fix USB MSC so that it unmounts correctly on Mac OS X. | Damien George | |
| Mac OS X sends a SCSI command to remove the medium when it unmounts a drive. If this command is not honoured, then OS X will automatically remount the drive, making it impossible to eject. This patch disables the USB MSC when the right SCSI command is sent. | |||
| 2014-04-15 | stmhal: Add ADC function to read data at a given frequency. | Damien George | |
| Reads ADC values into a bytearray (or similar) at a fixed rate. Needs a better name and improved API. Also fix up DAC dma function (which also needs a better name and API). | |||
| 2014-04-15 | stmhal: Add I2C.scan method, to scan all devices on the bus. | Damien George | |
| Simple way to find the address of an attached I2C device. | |||
| 2014-04-15 | stmhal: Add simple README.txt to freshly-created filesystem. | Damien George | |
| 2014-04-15 | Merge pull request #493 from aitjcize/patch | Damien George | |
| Move entry_table to separated header file. | |||
| 2014-04-15 | Rename header file. | AZ Huang | |
| 2014-04-15 | travis: Move diffing back to after_failure command. | Damien George | |
| Need to click on icon at right to see the output. | |||
| 2014-04-15 | py: Fix builtin hex to print prefix. | Damien George | |
| I was too hasty. Still a one-liner though. | |||
| 2014-04-15 | py: Add hex builtin function. | Damien George | |
| A one-liner, added especially for @pfalcon :) | |||
| 2014-04-15 | tests: Disable memoryerror.py test, since it fails on travis. | Damien George | |
| Would be good to test this, but need to find a way to optionally not running it when on travis. | |||
| 2014-04-15 | travis: Diff output, hopefully this works. | Damien George | |
| 2014-04-15 | travis: Continue to debug tests output. | Damien George | |
| Seems that any commands in after_failure do not have stdout... | |||
| 2014-04-15 | travis: More tests output debugging. | Damien George | |
| 2014-04-15 | stmhal: Wrap skin-named-usarts in PYBV10 #if. | Damien George | |
| 2014-04-15 | travis: More tests debugging. | Damien George | |
| 2014-04-15 | travis: Debugging failing tests. | Damien George | |
| 2014-04-15 | travis: On fail, cd to tests directory before diffing. | Damien George | |
| 2014-04-15 | Merge pull request #490 from redteam316/master | Damien George | |
| Fixed Travis-CI Build Status Link in README.md | |||
| 2014-04-15 | Move entry_table to separated header file. | AZ Huang | |
| 2014-04-15 | travis: only build unix with gcc-4.7 | Andrew Scheller | |
| 2014-04-15 | travis: build unix targets first | Andrew Scheller | |
| because @pfalcon says so | |||
| 2014-04-14 | Fixed Travis-CI Build Status Link in README.md | Jonathan Greig | |
| 2014-04-15 | Merge remote-tracking branch 'upstream/master' into patch-1 | Andrew Scheller | |
| Conflicts: .travis.yml | |||
| 2014-04-15 | .travis.yml: Use gcc-4.7 to avoid broken codegeneration and failed tests. | Paul Sokolovsky | |
| 2014-04-15 | Update .travis.yml | Andrew Scheller | |
| Check that the bare-arm, stmhal and unix-cpy ports at least remain compilable, even if we can only actually run tests against the unix port. | |||
| 2014-04-15 | Merge pull request #486 from lurch/patch-1 | Paul Sokolovsky | |
| Update .travis.yml to use python3.3 | |||
| 2014-04-15 | Update .travis.yml | Andrew Scheller | |
| Seems like I'd inadvertently created invalid YAML! | |||
| 2014-04-15 | Update .travis.yml | Andrew Scheller | |
| Add diffing of failure logs | |||
 |
index : openmano-mpy | |
| MicroPython source and hardware configuration for OpenMano | Damien George |
| aboutsummaryrefslogtreecommitdiff |