openmano-mpy/stmhal/hal/inc, branch master MicroPython source and hardware configuration for OpenMano stmhal: Move HAL Cube files to f4/ subdir, keeping only those we use. 2015-07-20T11:30:18+00:00 Damien George 2015-07-19T11:13:54+00:00 e4d43401eb098d3bfb4e9074e15b67fd86aaffe3 This is in preparation for supporting other MCU series, such as STM32F2xx. Directory structure for the HAL is now hal/f4/{inc,src}, where "f4" will in the future be different for other series. HAL source/header files that are not use are removed to reduce the size of the code. 
This is in preparation for supporting other MCU series, such as
STM32F2xx.  Directory structure for the HAL is now hal/f4/{inc,src},
where "f4" will in the future be different for other series.

HAL source/header files that are not use are removed to reduce the size
of the code.
stmhal: Change 64-bit arithmetic to 32-bit for SD card block addressing. 2014-09-15T22:49:57+00:00 Damien George 2014-09-15T22:49:57+00:00 1d7fb82f0aec11331635532583617d773888b991 By measuring SD card addresses in blocks and not bytes, one can get away with using 32-bit numbers. This patch also uses proper atomic lock/unlock around SD card read/write, adds SD.info() function, and gives error code for failed read/writes. 
By measuring SD card addresses in blocks and not bytes, one can get away
with using 32-bit numbers.

This patch also uses proper atomic lock/unlock around SD card
read/write, adds SD.info() function, and gives error code for failed
read/writes.
stmhal: Update STM32Cube F4 HAL driver to V1.3.0. 2014-08-06T21:33:31+00:00 Damien George 2014-08-06T21:33:31+00:00 3ef911345c94a6d612ab50c1e912e81cb2cc3f71 This patch updates ST's HAL to the latest version, V1.3.0, dated 19 June 2014. Files were copied verbatim from the ST package. Only change was to suppress compiler warning of unused variables in 4 places. A lot of the changes from ST are cosmetic: comments and white space. Some small code changes here and there, and addition of F411 header. Main code change is how SysTick interrupt is set: it now has a configuration variable to set the priority, so we no longer need to work around this (originall in system_stm32f4xx.c). 
This patch updates ST's HAL to the latest version, V1.3.0, dated 19 June
2014.  Files were copied verbatim from the ST package.  Only change was
to suppress compiler warning of unused variables in 4 places.

A lot of the changes from ST are cosmetic: comments and white space.
Some small code changes here and there, and addition of F411 header.

Main code change is how SysTick interrupt is set: it now has a
configuration variable to set the priority, so we no longer need to work
around this (originall in system_stm32f4xx.c).
Initial checkin with STM HAL 2014-03-12T06:55:41+00:00 Dave Hylands 2014-03-12T06:55:41+00:00 dd38d907244bc0e483c3d760f2ba464a394ec229 This compiles and links, but hasn't been tested on a board yet and even if it was run, it doesn't currently do anything. 
This compiles and links, but hasn't been tested on a board
yet and even if it was run, it doesn't currently do anything.