openmano-mpy/ports/rp2/Makefile, branch master MicroPython source and hardware configuration for OpenMano rp2: Add support for building different board configurations. 2021-04-12T11:40:32+00:00 jahr 2021-04-05T20:57:18+00:00 7ca686684ea5bffb45764bc3782f54133855a3c9 This change allows to build firmware for different rp2-based boards, following how it is done in other ports like stm32 and esp32. So far only the original Pico and Adafruit Feather RP2040 are added. Board names should match (sans case) those in pico-sdk/src/boards/include/boards/. Usage: Pico firmware can be build either using make as previously (it is the default board) or by `make BOARD=PICO`. Feather is built by `make BOARD=ADAFRUIT_FEATHER_RP2040`. Only the board name and flash drive size is set, pin definition is taken from the appropriate pico-sdk board definition. Firmware is saved in the directory build-BOARD_NAME. 
This change allows to build firmware for different rp2-based boards,
following how it is done in other ports like stm32 and esp32.  So far only
the original Pico and Adafruit Feather RP2040 are added.  Board names
should match (sans case) those in pico-sdk/src/boards/include/boards/.

Usage: Pico firmware can be build either using make as previously (it is
the default board) or by `make BOARD=PICO`.  Feather is built by `make
BOARD=ADAFRUIT_FEATHER_RP2040`.  Only the board name and flash drive size
is set, pin definition is taken from the appropriate pico-sdk board
definition.  Firmware is saved in the directory build-BOARD_NAME.
rp2: Add support for USER_C_MODULES to CMake build system. 2021-03-30T13:26:01+00:00 Phil Howard 2021-02-23T22:57:14+00:00 0cf12dd59c9ddddbd602d4267410033cb5a9d265 The parts that are generic are added to py/ so they can be used by other ports that use CMake. py/usermod.cmake: * Creates a usermod target to hang user C/CXX modules from. * Gathers sources from user C/CXX modules and libs for QSTR scan. ports/rp2/CMakeLists.txt: * Includes py/usermod.cmake. * Links the resulting usermod library to the MicroPython target. py/mkrules.cmake: Add cxxflags to qstr.i.last custom command for CXX modules: * MICROPY_CPP_FLAGS so CXX modules will find includes. * -DNO_QSTR to fix fatal error missing "genhdr/qstrdefs.generated.h". Usage: The rp2 port can be linked against user C modules by running: make USER_C_MODULES=/path/to/module/micropython.cmake CMake will print a list of included modules. Co-authored-by: Graham Sanderson <graham.sanderson@raspberrypi.org> Co-authored-by: Michael O'Cleirigh <michael.ocleirigh@rivulet.ca> Signed-off-by: Phil Howard <phil@pimoroni.com> 
The parts that are generic are added to py/ so they can be used by other
ports that use CMake.

py/usermod.cmake:

* Creates a usermod target to hang user C/CXX modules from.
* Gathers sources from user C/CXX modules and libs for QSTR scan.

ports/rp2/CMakeLists.txt:

* Includes py/usermod.cmake.
* Links the resulting usermod library to the MicroPython target.

py/mkrules.cmake:

Add cxxflags to qstr.i.last custom command for CXX modules:

* MICROPY_CPP_FLAGS so CXX modules will find includes.
* -DNO_QSTR to fix fatal error missing "genhdr/qstrdefs.generated.h".

Usage:

The rp2 port can be linked against user C modules by running:

make USER_C_MODULES=/path/to/module/micropython.cmake

CMake will print a list of included modules.

Co-authored-by: Graham Sanderson <graham.sanderson@raspberrypi.org>
Co-authored-by: Michael O'Cleirigh <michael.ocleirigh@rivulet.ca>
Signed-off-by: Phil Howard <phil@pimoroni.com>
rp2: Add new port to Raspberry Pi RP2 microcontroller. 2021-01-29T13:42:29+00:00 Damien George 2021-01-20T13:34:08+00:00 469345e7285128739e2934e7934e107ffda79fc1 This commit adds a new port "rp2" which targets the new Raspberry Pi RP2040 microcontroller. The build system uses pure cmake (with a small Makefile wrapper for convenience). The USB driver is TinyUSB, and there is a machine module with most of the standard classes implemented. Some examples are provided in the examples/rp2/ directory. Work done in collaboration with Graham Sanderson. Signed-off-by: Damien George <damien@micropython.org> 
This commit adds a new port "rp2" which targets the new Raspberry Pi RP2040
microcontroller.

The build system uses pure cmake (with a small Makefile wrapper for
convenience).  The USB driver is TinyUSB, and there is a machine module
with most of the standard classes implemented.  Some examples are provided
in the examples/rp2/ directory.

Work done in collaboration with Graham Sanderson.

Signed-off-by: Damien George <damien@micropython.org>