openmano-mpy/drivers/nrf24l01, branch master MicroPython source and hardware configuration for OpenMano all: Rename "sys" module to "usys". 2020-09-03T14:10:24+00:00 stijn 2020-06-18T09:19:14+00:00 40ad8f1666b265dafc7844d765f45cfae4b6299f This is consistent with the other 'micro' modules and allows implementing additional features in Python via e.g. micropython-lib's sys. Note this is a breaking change (not backwards compatible) for ports which do not enable weak links, as "import sys" must now be replaced with "import usys". 
This is consistent with the other 'micro' modules and allows implementing
additional features in Python via e.g. micropython-lib's sys.

Note this is a breaking change (not backwards compatible) for ports which
do not enable weak links, as "import sys" must now be replaced with
"import usys".
all: Reformat C and Python source code with tools/codeformat.py. 2020-02-27T23:33:03+00:00 Damien George 2020-02-27T04:36:53+00:00 69661f3343bedf86e514337cff63d96cc42f8859 This is run with uncrustify 0.70.1, and black 19.10b0. 
This is run with uncrustify 0.70.1, and black 19.10b0.
drivers/nrf24l01: Change pipe addrs in test to match Arduino addrs. 2020-02-16T12:26:34+00:00 Peter Hinch 2020-02-11T06:31:16+00:00 d2f22ea9531ee7e61d3e3c8b818797fd3e947b01 These addresses were initially chosen to match the nRF24 Arduino library examples but they are byte-reversed. So change them to be on-air compatible with the Arduino library. Also, the data sheet for the nRF24 says that RX data pipes 1-5 must share the same top 32-bits, and must differ only in the LSbyte. The addresses used here (while correct because they are on TX pipe and RX pipe 0) are misleading in this sense, because it looks like they were chosen to share the top 32-bits per the datasheet. 
These addresses were initially chosen to match the nRF24 Arduino library
examples but they are byte-reversed.  So change them to be on-air
compatible with the Arduino library.

Also, the data sheet for the nRF24 says that RX data pipes 1-5 must share
the same top 32-bits, and must differ only in the LSbyte.  The addresses
used here (while correct because they are on TX pipe and RX pipe 0) are
misleading in this sense, because it looks like they were chosen to share
the top 32-bits per the datasheet.
drivers/nrf24l01: Make driver and test run on pyboard, ESP8266, ESP32. 2017-11-20T00:37:47+00:00 Peter Hinch 2017-10-15T17:26:58+00:00 ccaa5f5b0bad69f0f0ea81151e34c218fe13ce66 






drivers/nrf24l01: Make nRF24L01 test script more portable.
2017-10-03T09:00:31+00:00

Damien George

2017-10-03T08:59:28+00:00

54acd0b0f050a99e9a5472b8d54cc729a60c3bc8












all: Use the name MicroPython consistently in comments
2017-07-31T08:35:40+00:00

Alexander Steffen

2017-06-30T07:22:17+00:00

55f33240f3d7051d4213629e92437a36f1fac50e

There were several different spellings of MicroPython present in comments,
when there should be only one.





There were several different spellings of MicroPython present in comments,
when there should be only one.







drivers: Replace deprecated Pin.high()/low() methods with .__call__(1/0).
2017-05-21T14:44:58+00:00

Paul Sokolovsky

2017-04-23T08:35:34+00:00

1c9ee497562ab49c00d190ff91b6689979f922f4












drivers/nrf24l01: Update to work on newer ports, using machine, utime.
2017-04-07T05:54:21+00:00

Damien George

2017-04-07T05:54:21+00:00

d7310fabc22ebf45aedcaade1c531ece96c33bf0

Changes made are:
- Use the time module in place of the pyb module for delays.
- Use spi.read/spi.write instead of spi.send/spi.receive.
- Drop some non-portable parameters to spi and pin initialization.

Thanks to @deshipu for the original patch.





Changes made are:
- Use the time module in place of the pyb module for delays.
- Use spi.read/spi.write instead of spi.send/spi.receive.
- Drop some non-portable parameters to spi and pin initialization.

Thanks to @deshipu for the original patch.







drivers: Fix some minor spelling mistakes.
2017-01-18T04:31:05+00:00

Mike Causer

2016-12-21T02:48:44+00:00

c5310ee5b545316d7b8770343908c19f1ff1cd0d

respones -> response
succeses -> successes





respones -> response
succeses -> successes







drivers: Add "from micropython import const" when const is used.
2016-11-03T01:41:11+00:00

Damien George

2016-11-03T01:41:11+00:00

7bb0f7b0f6218e813ca1ea9a21d5d549c7b36ab9

Following best-practice use of the const feature, to make it compatible
with Python.





Following best-practice use of the const feature, to make it compatible
with Python.