| Age | Commit message (Collapse) | Author |
|---|
|
|
|
|
|
Fixes BZ#5700
|
|
URLs on Windows are the same as on Unix, they use / not \.
|
|
Fix proposed by the reporter, Vincent Laporte.
Note that for LaTeX output, the selection of a keyword was already
done after checking if the ident is recognized as a Coq ident by
coqtop.
Incidentally, being now explicit on an wildcard-catching of exceptions.
|
|
|
|
On a machine for which ocamlopt is available, the make world will now
perform bytecode compilation only in grammar/ (up to the syntax
extension grammar.cma), and then exclusively use ocamlopt.
In particular, make world do not build bin/coqtop.byte.
A separate rule 'make byte' does it, as well as bytecode plugins and
things like dev/printers.cma.
'make install' deals only with the part built by 'make', while a new
rule 'make install-byte' installs the part built by 'make byte'.
IMPORTANT: PLEASE AVOID doing things like 'make -j world byte' or any
parallel mix of native and byte rules. These are known to crash sometimes,
see below. Instead, do rather 'make -j && make -j byte'.
Indeed, apart from marginal compilation speed-up for users not interested
in byte versions, the main reason for this commit is to discourage any
simultaneous use of OCaml native and byte compilers. Indeed, ocamlopt and
ocamlc will both happily destroy and recreate .cmi for .ml files with no .mli,
and in case of parallel build this may happen at the very moment another
ocaml(c|opt) is accessing this .cmi. Until now, this issue has been
handled via nasty hacks (see the former MLWITHOUTMLI and HACKMLI vars in
Makefile.build). But these hacks weren't obvious to extend to ocamlopt
-pack vs. ocamlopt -pack.
coqdep_boot takes a "-dyndep" option to control precisely how a Declare ML
Module influences the .v.d dependency file. Possible values are:
-dyndep opt : regular situation now, depends only on .cmxs
-dyndep byte : no ocamlopt, or compilation forced to bytecode, depends on .cm(o|a)
-dyndep both : earlier behavior, dependency over both .cm(o|a) and .cmxs
-dyndep none : interesting for coqtop with statically linked plugins
-dyndep var : place Makefile variables $(DYNLIB) and $(DYNOBJ) in .v.d
instead of extensions .cm*, so that the choice is made in the rest of the
makefile (see a future commit about coq_makefile)
NB: two extra mli added to avoid building unecessary .cmo during 'make world',
without having to use the ocamldep -native option.
NB: we should state somewhere that coqmktop -top won't work unless
'make byte' was done first
|
|
more uniform
|
|
|
|
|
|
This allows to centralize in the configuration file the description of
the 3 possible installation layouts (dispatched over directories
shared by multiple application as in unix, self-contained style like
in windows, local non-installation as with option -local).
Also supporting relocalisation when -prefix or -libdir and co is given.
|
|
This goes towards an approach where a local layout can be seen as an
installed layout.
|
|
Deprecations which can't be fixed in 4.02.3 are locally wrapped with
[@@@ocaml.warning "-3"]. The only ones encountered are
- capitalize to capitalize_ascii and variants. Changing to ascii would
break coqdoc -latin1 and maybe other things though.
- external "noalloc" to external [@@noalloc]
|
|
|
|
|
|
The `a.[i] <- x` notation is deprecated and we were getting a couple
of warnings.
|
|
No functional changes.
|
|
|
|
Moreover, this commit makes sure that an empty line after a list is always
translated into a break. ("StartLevel 1" was excluded, for some reason.)
It also avoids some code duplication. In particular, "stop_item ()" is
defined as "reach_item_level 0", so there is no reason to handle
"StartLevel 1" specially.
|
|
This reverts commit b2f8f9edd5c1bb0a9c8c4f4b049381b979d3e385, reversing
changes made to da99355b4d6de31aec5a660f7afe100190a8e683.
Hugo asked for more discussion on this topic, and it was not in the roadmap. I
merged it prematurely because I thought there was a consensus. Also, I missed
that it was changing coq_makefile. Sorry about that.
|
|
On a machine for which ocamlopt is available, the make world will now
perform bytecode compilation only in grammar/ (up to the syntax
extension grammar.cma), and then exclusively use ocamlopt.
In particular, make world do not build bin/coqtop.byte.
A separate rule 'make byte' does it, as well as bytecode plugins and
things like dev/printers.cma.
'make install' deals only with the part built by 'make', while a new
rule 'make install-byte' installs the part built by 'make byte'.
IMPORTANT: PLEASE AVOID doing things like 'make -j world byte' or any
parallel mix of native and byte rules. These are known to crash sometimes,
see below. Instead, do rather 'make -j && make -j byte'.
Indeed, apart from marginal compilation speed-up for users not interested
in byte versions, the main reason for this commit is to discourage any
simultaneous use of OCaml native and byte compilers. Indeed, ocamlopt and
ocamlc will both happily destroy and recreate .cmi for .ml files with no .mli,
and in case of parallel build this may happen at the very moment another
ocaml(c|opt) is accessing this .cmi. Until now, this issue has been
handled via nasty hacks (see the former MLWITHOUTMLI and HACKMLI vars in
Makefile.build). But these hacks weren't obvious to extend to ocamlopt
-pack vs. ocamlopt -pack.
coqdep_boot takes a "-dyndep" option to control precisely how a Declare ML
Module influences the .v.d dependency file. Possible values are:
-dyndep opt : regular situation now, depends only on .cmxs
-dyndep byte : no ocamlopt, or compilation forced to bytecode, depends on .cm(o|a)
-dyndep both : earlier behavior, dependency over both .cm(o|a) and .cmxs
-dyndep none : interesting for coqtop with statically linked plugins
-dyndep var : place Makefile variables $(DYNLIB) and $(DYNOBJ) in .v.d
instead of extensions .cm*, so that the choice is made in the rest of the
makefile (see next commit about coq_makedile)
NB: two extra mli added to avoid building unecessary .cmo during 'make world',
without having to use the ocamldep -native option.
NB: we should state somewhere that coqmktop -top won't work unless
'make byte' was done first
|
|
|
|
#4770).
This also fixes comments not being properly skipped when looking for eol.
|
|
As a side effect, there should be a small speedup when ignoring comments.
This commit also fixes two bugs related to handling "$$" and "#" in
comments.
|
|
|
|
|
|
|
|
(thanks to coq-club, Sep 2015).
|
|
|
|
"This function is deprecated: the runtime system is now able to print
uncaught exceptions as precisely as Printexc.catch does. Moreover, calling
Printexc.catch makes it harder to track the location of the exception
using the debugger or the stack backtrace facility. So, do not use
Printexc.catch in new code."
|
|
|
|
|
|
|
|
|
|
#3802.)
|
|
|
|
|
|
from v8.4)
- For the style of identifiers, coqdoc was using a 'type' attribute of
tag <span>. But this attribute isn't a legal attribute of tag <span>
according to the xhtml norm. Instead, I propose to use 'title' for that.
The coqdoc.css now supports both approaches.
- The names of inner links (cross references #foo) were
containing arbitrary characters (in the case of a notation string).
For instance in Utf8_core : <a name=":type_scope:'∀'_x_'..'_x_','_x">
Instead, when strange characters are detected, we now hash the
string via Digest, and use this hexa hash as html label.
- And some whitespace before />
|
|
documentation en ligne)
|
|
|
|
|
|
Involves changing the [mind_finite] field in the kernel from a bool to the trivalued type [Decl_kinds.recursivity_kind]. This is why so many files are (unfortunately) affected. It would not be very surprising if some bug was introduced.
|
|
Just like the [Record] keyword allows only non-recursive records.
|
|
|
|
|
|
|
|
locations found when parsing expressions in comments and the absolute
locations in the glob file).
As now, the glob file does not parse comment, so I removed the test
for location when parsing expressions in comments, which anyway are
not linkable, precisely because not parsed by coqc.
|
|
Factored out all functions that dump references to use one function
"dump_ref"
|
|
|
|
With ocaml 4.01, the 'unused open' warning also checks the mli :-)
Beware: some open are reported as useless when compiling with camlp5,
but are necessary for compatibility with camlp4. These open are now
marked with a comment.
|
