| Age | Commit message (Collapse) | Author |
|---|
|
|
|
|
|
Add a boolean for refolding during reduction, and an option
that is off by default in 8.6, to turn refolding on in all reduction
functions, as in 8.5.
|
|
This legacy function is still used by destruct, and is a hotspot in various
examples from the wild. We hijack the check from Typeclass and perform a
double check at once not to mark unresolvable evars in vain a lot.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
composition operator.
Short story:
This pull-request:
(1) removes the definition of the "right-to-left" function composition operator
(2) adds the definition of the "left-to-right" function composition operator
(3) rewrites the code relying on "right-to-left" function composition to rely on "left-to-right" function composition operator instead.
Long story:
In mathematics, function composition is traditionally denoted with ∘ operator.
Ocaml standard library does not provide analogous operator under any name.
Batteries Included provides provides two alternatives:
_ % _
and
_ %> _
The first operator one corresponds to the classical ∘ operator routinely used in mathematics.
I.e.:
(f4 % f3 % f2 % f1) x ≜ (f4 ∘ f3 ∘ f2 ∘ f1) x
We can call it "right-to-left" composition because:
- the function we write as first (f4) will be called as last
- and the function write as last (f1) will be called as first.
The meaning of the second operator is this:
(f1 %> f2 %> f3 %> f4) x ≜ (f4 ∘ f3 ∘ f2 ∘ f1) x
We can call it "left-to-right" composition because:
- the function we write as first (f1) will be called first
- and the function we write as last (f4) will be called last
That is, the functions are written in the same order in which we write and read them.
I think that it makes sense to prefer the "left-to-right" variant because
it enables us to write functions in the same order in which they will be actually called
and it thus better fits our culture
(we read/write from left to right).
|
|
|
|
|
|
|
|
"Context.{Rel,Named}.fold_constr"
|
|
mainly concerning referring to "Context.{Rel,Named}.get_{id,value,type}" functions.
If multiple modules define a function with a same name, e.g.:
Context.{Rel,Named}.get_type
those calls were prefixed with a corresponding prefix
to make sure that it is obvious which function is being called.
|
|
|
|
Suggested by @ppedrot
|
|
As noted by @ppedrot, the first is redundant. The patch is basically a renaming.
We didn't make the component optional yet, but this could happen in a
future patch.
|
|
In some cases prior to this patch, there were two cases for the same
error function, one taking a location, the other not.
We unify them by using an option parameter, in the line with recent
changes in warnings and feedback.
This implies a bit of clean up in some places, but more importantly, is
the preparation for subsequent patches making `Loc.location` opaque,
change that could be use to improve modularity and allow a more
functional implementation strategy --- for example --- of the
beautifier.
|
|
This is a followup to 91ee24b4a7843793a84950379277d92992ba1651 , where
we got a few cases wrong wrt to newline endings.
Thanks to @herbelin for pointing it out.
This doesn't yet fix https://coq.inria.fr/bugs/show_bug.cgi?id=4842
|
|
|
|
|
|
|
|
|
|
For the moment, there is a Closure module in compiler-libs/ocamloptcomp.cm(x)a
|
|
module)
For the moment, there is an Error module in compilers-lib/ocamlbytecomp.cm(x)a
|
|
|
|
This is a reimplementation of Hugo's PR#117.
We are trying to address the problem that the name of some reduction functions
was not saying what they were doing (e.g. whd_betadeltaiota was doing let-in
reduction). Like PR#117, we are careful that no function changed semantics
without changing the names. Porting existing ML code should be a matter of
renamings a few function calls.
Also, we introduce more precise reduction flags fMATCH, fFIX, fCOFIX
collectively denominated iota.
We renamed the following functions:
Closure.betadeltaiota -> Closure.all
Closure.betadeltaiotanolet -> Closure.allnolet
Reductionops.beta -> Closure.beta
Reductionops.zeta -> Closure.zeta
Reductionops.betaiota -> Closure.betaiota
Reductionops.betaiotazeta -> Closure.betaiotazeta
Reductionops.delta -> Closure.delta
Reductionops.betalet -> Closure.betazeta
Reductionops.betadelta -> Closure.betadeltazeta
Reductionops.betadeltaiota -> Closure.all
Reductionops.betadeltaiotanolet -> Closure.allnolet
Closure.no_red -> Closure.nored
Reductionops.nored -> Closure.nored
Reductionops.nf_betadeltaiota -> Reductionops.nf_all
Reductionops.whd_betadelta -> Reductionops.whd_betadeltazeta
Reductionops.whd_betadeltaiota -> Reductionops.whd_all
Reductionops.whd_betadeltaiota_nolet -> Reductionops.whd_allnolet
Reductionops.whd_betadelta_stack -> Reductionops.whd_betadeltazeta_stack
Reductionops.whd_betadeltaiota_stack -> Reductionops.whd_all_stack
Reductionops.whd_betadeltaiota_nolet_stack -> Reductionops.whd_allnolet_stack
Reductionops.whd_betadelta_state -> Reductionops.whd_betadeltazeta_state
Reductionops.whd_betadeltaiota_state -> Reductionops.whd_all_state
Reductionops.whd_betadeltaiota_nolet_state -> Reductionops.whd_allnolet_state
Reductionops.whd_eta -> Reductionops.shrink_eta
Tacmach.pf_whd_betadeltaiota -> Tacmach.pf_whd_all
Tacmach.New.pf_whd_betadeltaiota -> Tacmach.New.pf_whd_all
And removed the following ones:
Reductionops.whd_betaetalet
Reductionops.whd_betaetalet_stack
Reductionops.whd_betaetalet_state
Reductionops.whd_betadeltaeta_stack
Reductionops.whd_betadeltaeta_state
Reductionops.whd_betadeltaeta
Reductionops.whd_betadeltaiotaeta_stack
Reductionops.whd_betadeltaiotaeta_state
Reductionops.whd_betadeltaiotaeta
They were unused and having some reduction functions perform eta is confusing
as whd_all and nf_all don't do it.
|
|
|
|
But there are still bugs with Declare Implicit Tactic, which should
probably rather be reimplemented with ltac:(tac).
Indeed, it does support evars in the type of the term, and
solve_by_implicit_tactic should transfer universe constraints to the
main goal. E.g., the following still fails, at Qed time.
Definition Foo {T}{a : T} : T := a.
Declare Implicit Tactic eassumption.
Goal forall A (x : A), A.
intros.
apply Foo.
Qed.
|
|
On the user side, coqtop and coqc take a list of warning names or categories
after -w. No prefix means activate the warning, a "-" prefix means deactivate
it, and "+" means turn the warning into an error. Special categories include
"all", and "default" which contains the warnings enabled by default.
We also provide a vernacular Set Warnings which takes the same flags as argument.
Note that coqc now prints warnings.
The name and category of a warning are printed with the warning itself.
On the developer side, Feedback.msg_warning is still accessible, but the
recommended way to print a warning is in two steps:
1) create it by:
let warn_my_warning =
CWarnings.create ~name:"my-warning" ~category:"my-category"
(fun args -> Pp.strbrk ...)
2) print it by:
warn_my_warning args
|
|
|
|
|
|
|
|
You can now write [[1, 3-5]:tac.] to apply [tac] on the subgoals
numbered 1 and 3 to 5.
|
|
|
|
The tentative fix in f9695eb4b (which I was afraid it might be too
strong, since it was implying failing more often) indeed broke other
things (see #4813).
|
|
Trying to now catch all unification errors, but without a clear view
at whether some errors could be tolerated at the point of checking the
type of the binding.
|
|
|
|
|
|
|
|
This patch splits pretty printing representation from IO operations.
- `Pp` is kept in charge of the abstract pretty printing representation.
- The `Feedback` module provides interface for doing printing IO.
The patch continues work initiated for 8.5 and has the following effects:
- The following functions in `Pp`: `pp`, `ppnl`, `pperr`, `pperrnl`,
`pperr_flush`, `pp_flush`, `flush_all`, `msg`, `msgnl`, `msgerr`,
`msgerrnl`, `message` are removed. `Feedback.msg_*` functions must be
used instead.
- Feedback provides different backends to handle output, currently,
`stdout`, `emacs` and CoqIDE backends are provided.
- Clients cannot specify flush policy anymore, thus `pp_flush` et al are
gone.
- `Feedback.feedback` takes an `edit_or_state_id` instead of the old
mix.
Lightly tested: Test-suite passes, Proof General and CoqIDE seem to work.
|
|
Return the most appropriate evar_map for commands that can run on
non-focused proofs (like Check, Show and debug printers) so that
universes and existentials are printed correctly (they are global
to the proof). The API is backwards compatible.
|
|
|
|
|
|
|
|
|
|
|
