| Age | Commit message (Collapse) | Author |
|---|
|
were closed (i.e. the only remaining ones are those of printing/parsing).
Meanwhile, a simplified interface is provided in loc.mli.
This also permits to put Pp in Clib, because it does not depend on
CAMLP4/5 anymore.
git-svn-id: svn+ssh://scm.gforge.inria.fr/svn/coq/trunk@15475 85f007b7-540e-0410-9357-904b9bb8a0f7
|
|
First Notations, syntactic definitions, primitive entries are tackled to build
raw_cases_pattern_expr. Reference are revolved at this time too. Then raw_patterns
are internalized as cases_pattern or applied inductive (dealing with implicit
args, or_pattern refactoring, aliases).
It is more uniform, it allows notations for non fully applied constructors but :
- It does not raise a warning when an identifier is also a global_reference
different than a constructor.
- It looks for implicit arguments twice. (because finding scopes of arguments
asks for implicit arguments).
- It does not deal anymore with constants that evaluates to constructor. (This one
is voluntary, dealing with implicit & notations is already a hell full of bugs
so what will be next step ? Any terms that computes to a pattern ???)
git-svn-id: svn+ssh://scm.gforge.inria.fr/svn/coq/trunk@15439 85f007b7-540e-0410-9357-904b9bb8a0f7
|
|
git-svn-id: svn+ssh://scm.gforge.inria.fr/svn/coq/trunk@15431 85f007b7-540e-0410-9357-904b9bb8a0f7
|
|
git-svn-id: svn+ssh://scm.gforge.inria.fr/svn/coq/trunk@15414 85f007b7-540e-0410-9357-904b9bb8a0f7
|
|
git-svn-id: svn+ssh://scm.gforge.inria.fr/svn/coq/trunk@15413 85f007b7-540e-0410-9357-904b9bb8a0f7
|
|
git-svn-id: svn+ssh://scm.gforge.inria.fr/svn/coq/trunk@15412 85f007b7-540e-0410-9357-904b9bb8a0f7
|
|
git-svn-id: svn+ssh://scm.gforge.inria.fr/svn/coq/trunk@15400 85f007b7-540e-0410-9357-904b9bb8a0f7
|
|
git-svn-id: svn+ssh://scm.gforge.inria.fr/svn/coq/trunk@15399 85f007b7-540e-0410-9357-904b9bb8a0f7
|
|
git-svn-id: svn+ssh://scm.gforge.inria.fr/svn/coq/trunk@15392 85f007b7-540e-0410-9357-904b9bb8a0f7
|
|
git-svn-id: svn+ssh://scm.gforge.inria.fr/svn/coq/trunk@15387 85f007b7-540e-0410-9357-904b9bb8a0f7
|
|
grammar.cma
git-svn-id: svn+ssh://scm.gforge.inria.fr/svn/coq/trunk@15384 85f007b7-540e-0410-9357-904b9bb8a0f7
|
|
git-svn-id: svn+ssh://scm.gforge.inria.fr/svn/coq/trunk@15382 85f007b7-540e-0410-9357-904b9bb8a0f7
|
|
git-svn-id: svn+ssh://scm.gforge.inria.fr/svn/coq/trunk@15381 85f007b7-540e-0410-9357-904b9bb8a0f7
|
|
git-svn-id: svn+ssh://scm.gforge.inria.fr/svn/coq/trunk@15380 85f007b7-540e-0410-9357-904b9bb8a0f7
|
|
git-svn-id: svn+ssh://scm.gforge.inria.fr/svn/coq/trunk@15376 85f007b7-540e-0410-9357-904b9bb8a0f7
|
|
git-svn-id: svn+ssh://scm.gforge.inria.fr/svn/coq/trunk@15375 85f007b7-540e-0410-9357-904b9bb8a0f7
|
|
Stuff about reductions now in genredexpr.mli, operations in redops.ml
git-svn-id: svn+ssh://scm.gforge.inria.fr/svn/coq/trunk@15374 85f007b7-540e-0410-9357-904b9bb8a0f7
|
|
NB: former Tacexpr.no_move is now Tacexpr.MoveLast
(when introducing, intro with no move is intro as last)
git-svn-id: svn+ssh://scm.gforge.inria.fr/svn/coq/trunk@15373 85f007b7-540e-0410-9357-904b9bb8a0f7
|
|
Corresponding operations in locusops.ml and miscops.ml
The type of occurrences is now a clear algebraic one instead of
a bool*list hard to understand.
git-svn-id: svn+ssh://scm.gforge.inria.fr/svn/coq/trunk@15372 85f007b7-540e-0410-9357-904b9bb8a0f7
|
|
git-svn-id: svn+ssh://scm.gforge.inria.fr/svn/coq/trunk@15371 85f007b7-540e-0410-9357-904b9bb8a0f7
|
|
git-svn-id: svn+ssh://scm.gforge.inria.fr/svn/coq/trunk@15368 85f007b7-540e-0410-9357-904b9bb8a0f7
|
|
Adds a directory ./intf for pure interfaces.
git-svn-id: svn+ssh://scm.gforge.inria.fr/svn/coq/trunk@15367 85f007b7-540e-0410-9357-904b9bb8a0f7
|
|
With this subtac forgotten target, the coqdepdeps rule was unsatisfiable,
blocking the ocamlbuild compilation on a nasty circular dependency error
on initial.coq (sic).
git-svn-id: svn+ssh://scm.gforge.inria.fr/svn/coq/trunk@15240 85f007b7-540e-0410-9357-904b9bb8a0f7
|
|
git-svn-id: svn+ssh://scm.gforge.inria.fr/svn/coq/trunk@15239 85f007b7-540e-0410-9357-904b9bb8a0f7
|
|
constr as argument (rather than openconstr) assumed that the evar_map
output by pretyping was irrelevant as the final constr didn't have any evars.
However, if said constr was defined using pre-existing evars from the
context, the evars may be instantiated by pretyping, hence dropping the
output evar_map led to inconsistent proof terms.
This fixes bug #2739 ( https://coq.inria.fr/bugs/show_bug.cgi?id=2739 ).
Thanks Arthur for noticing it.
Note: change still has the bug, because more serious issues interfered with
my fix.
git-svn-id: svn+ssh://scm.gforge.inria.fr/svn/coq/trunk@15207 85f007b7-540e-0410-9357-904b9bb8a0f7
|
|
Why2 has not been maintained for the last few years and the Why3 plugin should
be a suitable replacement in most cases.
Removed tactics: simplify, ergo, yices, cvc3, z3, cvcl, harvey, zenon, gwhy.
Removed commands: Dp_hint, Dp_timeout, Dp_prelude, Dp_predefined, Dp_debug,
Dp_trace.
Note that the "admit" tactic was actually provided by the Dp plugin. It has
been moved to extratactics.ml4.
Ported from v8.4 r15186.
git-svn-id: svn+ssh://scm.gforge.inria.fr/svn/coq/trunk@15189 85f007b7-540e-0410-9357-904b9bb8a0f7
|
|
No good reason for that except uniformity so revert this commit if you find a
reason against it.
git-svn-id: svn+ssh://scm.gforge.inria.fr/svn/coq/trunk@15146 85f007b7-540e-0410-9357-904b9bb8a0f7
|
|
- Clib that does not depend on camlpX and is made to be shared by all coq
tools/scripts/...
- Lib that is Coqtop specific
As a side effect for the build system :
- Coq_config is in Clib and does not appears in makefiles
- only the BEST version of coqc and coqmktop is made
- ocamlbuild build system fails latter but is still broken
(ocamldebug finds automatically Unix but not Str. I've probably done something wrong here.)
git-svn-id: svn+ssh://scm.gforge.inria.fr/svn/coq/trunk@15144 85f007b7-540e-0410-9357-904b9bb8a0f7
|
|
git-svn-id: svn+ssh://scm.gforge.inria.fr/svn/coq/trunk@15129 85f007b7-540e-0410-9357-904b9bb8a0f7
|
|
To mitigate the lack of a general "info" tactical, let's
introduce some specialized tactics info_trivial, info_auto
and info_eauto that display the basic tactics used when
solving a goal.
We also add tactics "debug trivial" and "debug auto" which
display every basic tactics attempted by trivial or auto.
Triggering the "info" or "debug" mode for auto, eauto, trivial
can also be done now via global options, such as Set Debug Auto
or Set Info Eauto. In case both debug and info modes are
activated, the debug mode takes precedence.
NB: it would be nice to name these tactics "info xxx" instead
of "info_xxx", but I don't see how to implement a "info eauto"
in eauto.ml4 (hence by TACTIC EXTEND) while keeping
a generic "info foo" tactic in g_ltac.ml4 (useful to display
a nice message about the unavailability of the general info).
git-svn-id: svn+ssh://scm.gforge.inria.fr/svn/coq/trunk@15103 85f007b7-540e-0410-9357-904b9bb8a0f7
|
|
We now accept the following code: Definition E := 0. Module E. End E.
Techically, we simply allow the same label to occur at most twice in
a structure_body, which is a (label * structure_field_body) list).
These two label occurences should not be at the same level of fields
(e.g. a SFBmodule and a SFBmind are ok, but not two SFBmodule's or
a SFBmodule and a SFBmodtype). Gain : a minimal amount of code change.
Drawback : no more simple List.assoc or equivalent should be performed
on a structure_body ...
git-svn-id: svn+ssh://scm.gforge.inria.fr/svn/coq/trunk@15088 85f007b7-540e-0410-9357-904b9bb8a0f7
|
|
Migrate the backtracking code from ide_slave.ml into a new backtrack.ml.
In particular the history stack of commands that used to be there is now
non-coqide-specific.
** Adapted commands **
- "Show Script": a basic functional version is restored (and the printing
of scripts at Qed in coqtop). No indentation, one Coq command per line,
based on the vernac_expr asts recorded in the history stack, printed via
Ppvernac.
- "Back n" : now mimics the backtrack of coqide: it goes n steps back
(both commands and proofs), and maybe more if needed to avoid re-entering
a proof (it outputs a warning in this case).
- "BackTo n" : still try to go back to state n, but it also handles the
proof state, and it may end on some state n' <= n if needed to avoid
re-entering a proof. Ideally, it could someday be used by ProofGeneral
instead of the complex Backtrack command.
** Compatible commands **
- "Backtrack" is left intact from compatibility with current ProofGeneral.
We simply re-synchronize the command history stack after each Backtrack.
- "Undo" is kept as a standard command, not a backtracking one, a bit like
"Focus". Same for "Restart" and "Abort". All of these are now accepted
in coqide (Undo simply triggers a warning).
- Undocumented command "Undo To n" (counting from start of proof instead of
from end) also keep its semantics, it is simply made compatible with
the new stack mechanism.
** New restrictions **
We now forbid backtracking commands (Reset* / Back*) inside files
when Load'ing or compiling, or inside VernacList/VernacTime/VernacFail.
Too much work dealing with these situation that nobody uses.
** Internal details **
Internally, the command stack differs a bit from what was in Ide_slave
earlier (which was inspired by lisp code in ProofGeneral). We now tag
commands that are unreachable by a backtrack, due to some proof being
finished, aborted, restarted, or partly Undo'ed. This induce a bit of
bookkeeping during Qed/Abort/Restart/Undo, but then the backtracking code
is straightforward: we simply search backward the first reachable state
starting from the desired place. We don't depend anymore on the proof
names (apart in the last proof block), It's more robust this way
(think of re-entering a M.foo from an outside proof foo).
Many internal clarifications in Lib, Vernac, etc. For instance
"Reset Initial" is now just a BackTo 1, while "Reset foo" now calls
(Lib.label_before_name "foo"), and performs a BackTo to the corresponding
label.
Concerning Coqide, we directly suppress the regular printing of goals
via a flag in Vernacentries. This avoid relying on a classification
of commands in Ide_slave as earlier.
git-svn-id: svn+ssh://scm.gforge.inria.fr/svn/coq/trunk@15085 85f007b7-540e-0410-9357-904b9bb8a0f7
|
|
The optimisation done of Namegen.visibly_occur_id did not preserve
the previous behavior when pr_constr/constr_extern/detype were
called on a term with free rel variables. We backtrack on it to
go back to the 8.2 behavior.
Seized this opportunity to clarify the meaning of the at_top flag
in constrextern.ml and printer.ml and to rename it into
goal_concl_style. The badly-named at_top flag was introduced in
Coq 6.3 in 1999 to mean that when printing variables bound in the
goal, names had to avoid the names of the variables of the goal
context, so as to keep naming stable when using "intro"; in
r4458, printing improved by not avoiding names that were short
names of global definitions, e.g. "S", or "O" (except when the
at_top flag was on for compatibility reasons).
Other printing strategies could be possible in the
non-goal-concl-style mode. For instance, all bound variables
could be made distinct in a given expression, even if no clash
occur, therefore following so-called Barendregt's
convention. This could be done by setting "avoid"
to "ids_of_rel_context (rel_context env)" in extern_constr and
extern_type (and then, Namegen.visibly_occur_id could be
re-simplified again!).
git-svn-id: svn+ssh://scm.gforge.inria.fr/svn/coq/trunk@15067 85f007b7-540e-0410-9357-904b9bb8a0f7
|
|
"f atomic_tac" as a short-hand for "f ltac:(atomic_tac)" for "f" an
Ltac function - see Tacinterp.add_primitive_tactic).
More precisely, when parsing "f ref" and "ref" is recognized as the
name of some TACTIC-EXTEND-defined tactic parsable as an atomic tactic
(like "eauto", "firstorder", "discriminate", ...), the code was
correct only when a rule of the form `TACTIC EXTEND ... [ "foo" -> ...] END'
was given (where "foo" has no arguments in the rule) but not when a rule
of the form `TACTIC EXTEND ... [ "foo" tactic_opt(p) -> ...] END' was given
(where "foo" had an optional argument in the rule). In particular,
"firstorder" was in this case.
More generally, if, for an extra argument able to parse the empty string, a rule
`TACTIC EXTEND ... [ "foo" my_special_extra_arg(p) -> ...] END' was given,
then "foo" was not recognized as parseable as an atomic string (this
happened e.g. for "eauto"). This is now also fixed.
There was also another bug when the internal name of tactic was not
the same as the user-level name of the tactic. This is the reason why
"congruence" was not recognized when given as argument of an ltac (its
internal name is "cc").
Incidentally removed the redundant last line in the parsing rule for
"firstorder".
git-svn-id: svn+ssh://scm.gforge.inria.fr/svn/coq/trunk@15041 85f007b7-540e-0410-9357-904b9bb8a0f7
|
|
git-svn-id: svn+ssh://scm.gforge.inria.fr/svn/coq/trunk@15039 85f007b7-540e-0410-9357-904b9bb8a0f7
|
|
of evars.
Used when interpreting a constr in Ltac: resolution is now launched if the constr
is casted.
git-svn-id: svn+ssh://scm.gforge.inria.fr/svn/coq/trunk@15038 85f007b7-540e-0410-9357-904b9bb8a0f7
|
|
add_definition/fixpoint and parsing of the "Program" prefix.
git-svn-id: svn+ssh://scm.gforge.inria.fr/svn/coq/trunk@15036 85f007b7-540e-0410-9357-904b9bb8a0f7
|
|
toplevel/
The code is not called yet from there.
git-svn-id: svn+ssh://scm.gforge.inria.fr/svn/coq/trunk@15035 85f007b7-540e-0410-9357-904b9bb8a0f7
|
|
git-svn-id: svn+ssh://scm.gforge.inria.fr/svn/coq/trunk@15034 85f007b7-540e-0410-9357-904b9bb8a0f7
|
|
- Remove useless functorization of Pretyping
- Move Program coercion/cases code inside pretyping/, enabled according
to a flag.
git-svn-id: svn+ssh://scm.gforge.inria.fr/svn/coq/trunk@15033 85f007b7-540e-0410-9357-904b9bb8a0f7
|
|
solutions to unification.
Only allow bidirectional checking of constructor applications, enabled by a program_mode flag:
it is backwards-incompatible due to delta-reduction, constructor parameters might get instantiated
with delta-equivalent but not syntactically equivalent terms.
Prepare for merging the Program-specific version of Pretyping/Cases/Coercion with the main code.
git-svn-id: svn+ssh://scm.gforge.inria.fr/svn/coq/trunk@15032 85f007b7-540e-0410-9357-904b9bb8a0f7
|
|
Detyping is wrong about it and as far as I understand no one but Constrextern uses
it. Constrextern has now the same machinery for all patterns.
Revert if I miss something.
git-svn-id: svn+ssh://scm.gforge.inria.fr/svn/coq/trunk@15022 85f007b7-540e-0410-9357-904b9bb8a0f7
|
|
Util only depends on Ocaml stdlib and Utf8 tables.
Generic pretty printing and loc functions are in Pp.
Generic errors are in Errors.
+ Training white-spaces, useless open, prlist copies random erasure.
Too many "open Errors" on the contrary.
git-svn-id: svn+ssh://scm.gforge.inria.fr/svn/coq/trunk@15020 85f007b7-540e-0410-9357-904b9bb8a0f7
|
|
+ Allowing much more function to be defined.
+ Using completely new algorithm to define non structural fixpoints
git-svn-id: svn+ssh://scm.gforge.inria.fr/svn/coq/trunk@15009 85f007b7-540e-0410-9357-904b9bb8a0f7
|
|
git-svn-id: svn+ssh://scm.gforge.inria.fr/svn/coq/trunk@15008 85f007b7-540e-0410-9357-904b9bb8a0f7
|
|
git-svn-id: svn+ssh://scm.gforge.inria.fr/svn/coq/trunk@15005 85f007b7-540e-0410-9357-904b9bb8a0f7
|
|
git-svn-id: svn+ssh://scm.gforge.inria.fr/svn/coq/trunk@15004 85f007b7-540e-0410-9357-904b9bb8a0f7
|
|
git-svn-id: svn+ssh://scm.gforge.inria.fr/svn/coq/trunk@15000 85f007b7-540e-0410-9357-904b9bb8a0f7
|
|
Fix a regression in subtac_pretyping, avoiding application of bidirectional application checking in
case the return type is a subset (bad interaction with typeclass overloading). Should be done only
on constructor applications.
git-svn-id: svn+ssh://scm.gforge.inria.fr/svn/coq/trunk@14985 85f007b7-540e-0410-9357-904b9bb8a0f7
|
|
Program.
git-svn-id: svn+ssh://scm.gforge.inria.fr/svn/coq/trunk@14982 85f007b7-540e-0410-9357-904b9bb8a0f7
|
